RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>64980-441-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (64980-441-15)  &gt; 15 g in 1 TUBE</PackageDescription>
    <NDC11Code>64980-0441-15</NDC11Code>
    <ProductNDC>64980-441</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobetasol Propionate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20190131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211401</ApplicationNumber>
    <LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190131</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobetasol propionate cream is super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamicpituitary- adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
    <Description>Clobetasol Propionate Cream USP, 0.05% contain the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11ß,16ß)-21-chloro-9- fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1,4- diene-3,20-dione, and it has the following structural formula. Clobetasol propionate has the molecular formula C25H32ClFO5 and a molecular weight of 467. It is a white to cream-colored crystalline powder insoluble in water. Clobetasol propionate cream contains clobetasol propionate 0.5 mg/g in a cream base composed of propylene glycol, glyceryl monostearate, cetostearyl alcohol, glyceryl stearate/PEG 100 stearate, white wax, chlorocresol, sodium citrate anhydrous, citric acid anhydrous, and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-441-03</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (64980-441-03)  &gt; 30 g in 1 TUBE</PackageDescription>
    <NDC11Code>64980-0441-03</NDC11Code>
    <ProductNDC>64980-441</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobetasol Propionate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20190131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211401</ApplicationNumber>
    <LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190131</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobetasol propionate cream is super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamicpituitary- adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
    <Description>Clobetasol Propionate Cream USP, 0.05% contain the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11ß,16ß)-21-chloro-9- fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1,4- diene-3,20-dione, and it has the following structural formula. Clobetasol propionate has the molecular formula C25H32ClFO5 and a molecular weight of 467. It is a white to cream-colored crystalline powder insoluble in water. Clobetasol propionate cream contains clobetasol propionate 0.5 mg/g in a cream base composed of propylene glycol, glyceryl monostearate, cetostearyl alcohol, glyceryl stearate/PEG 100 stearate, white wax, chlorocresol, sodium citrate anhydrous, citric acid anhydrous, and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-441-45</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (64980-441-45)  &gt; 45 g in 1 TUBE</PackageDescription>
    <NDC11Code>64980-0441-45</NDC11Code>
    <ProductNDC>64980-441</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobetasol Propionate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20190131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211401</ApplicationNumber>
    <LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190131</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobetasol propionate cream is super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamicpituitary- adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
    <Description>Clobetasol Propionate Cream USP, 0.05% contain the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11ß,16ß)-21-chloro-9- fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1,4- diene-3,20-dione, and it has the following structural formula. Clobetasol propionate has the molecular formula C25H32ClFO5 and a molecular weight of 467. It is a white to cream-colored crystalline powder insoluble in water. Clobetasol propionate cream contains clobetasol propionate 0.5 mg/g in a cream base composed of propylene glycol, glyceryl monostearate, cetostearyl alcohol, glyceryl stearate/PEG 100 stearate, white wax, chlorocresol, sodium citrate anhydrous, citric acid anhydrous, and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-441-60</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (64980-441-60)  &gt; 60 g in 1 TUBE</PackageDescription>
    <NDC11Code>64980-0441-60</NDC11Code>
    <ProductNDC>64980-441</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobetasol Propionate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20190131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211401</ApplicationNumber>
    <LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190131</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobetasol propionate cream is super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamicpituitary- adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
    <Description>Clobetasol Propionate Cream USP, 0.05% contain the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11ß,16ß)-21-chloro-9- fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1,4- diene-3,20-dione, and it has the following structural formula. Clobetasol propionate has the molecular formula C25H32ClFO5 and a molecular weight of 467. It is a white to cream-colored crystalline powder insoluble in water. Clobetasol propionate cream contains clobetasol propionate 0.5 mg/g in a cream base composed of propylene glycol, glyceryl monostearate, cetostearyl alcohol, glyceryl stearate/PEG 100 stearate, white wax, chlorocresol, sodium citrate anhydrous, citric acid anhydrous, and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-124-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (64980-124-15)  / 15 g in 1 TUBE</PackageDescription>
    <NDC11Code>64980-0124-15</NDC11Code>
    <ProductNDC>64980-124</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diflorasone Diacetate</ProprietaryName>
    <NonProprietaryName>Diflorasone Diacetate</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20170227</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207440</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>DIFLORASONE DIACETATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-06-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170227</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Topical corticosteroids are indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
    <Description>Each gram of diflorasone diacetate ointment contains 0.5 mg diflorasone diacetate in an ointment base. Chemically, diflorasone diacetate is 6α,9-difluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3, 20-dione 17,21-diacetate. The structural formula is represented below. C26H32F2O7 MW = 494.54 Each gram of diflorasone diacetate ointment contains 0.5 mg diflorasone diacetate in an ointment base of propylene glycol, glyceryl monostearate and white petrolatum.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-325-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (64980-325-15)  &gt; 15 g in 1 TUBE</PackageDescription>
    <NDC11Code>64980-0325-15</NDC11Code>
    <ProductNDC>64980-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nystatin And Triamcinolone Acetonide</ProprietaryName>
    <NonProprietaryName>Nystatin And Triamcinolone Acetonide</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20180215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206785</ApplicationNumber>
    <LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>NYSTATIN; TRIAMCINOLONE ACETONIDE</SubstanceName>
    <StrengthNumber>100000; 1</StrengthNumber>
    <StrengthUnit>[USP'U]/g; mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-12-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nystatin and Triamcinolone Acetonide Ointment is indicated for the treatment of cutaneous candidiasis; it has been demonstrated that the nystatin-steroid combination provides greater benefit than the nystatin component alone during the first few days of treatment.</IndicationAndUsage>
    <Description>Nystatin and Triamcinolone Acetonide Ointment for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder with a cereallike odor, very slightly soluble in water, and slightly to sparingly soluble in alcohol. Structural formula. C47H75NO17 MW = 926.13. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The white to cream crystalline powder has a slight odor, is practically insoluble in water, and very soluble in alcohol. Structural formula. C24H31FO6 MW = 434.50. Each gram of Nystatin and Triamcinolone Acetonide Ointment provides 100,000 USP Nystatin units and 1 mg Triamcinolone Acetonide in an ointment base of mineral oil and polyethylene.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-326-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (64980-326-15)  &gt; 15 g in 1 TUBE</PackageDescription>
    <NDC11Code>64980-0326-15</NDC11Code>
    <ProductNDC>64980-326</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desoximetasone</ProprietaryName>
    <NonProprietaryName>Desoximetasone</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20160812</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204675</ApplicationNumber>
    <LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DESOXIMETASONE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Desoximetasone Gel USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
    <Description>Desoximetasone Gel USP, 0.05% contains the active synthetic corticosteroid desoximetasone. The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Each gram of Desoximetasone Gel USP, 0.05% contains 0.5 mg of desoximetasone in a gel base consisting of carbopol 980, docusate sodium, edetate disodium, isopropyl myristate, purified water, SDAG-3 95% alcohol, and trolamine. The chemical name of desoximetasone is Pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21 dihydroxy-16-methyl-, (11β, 16α)-. Desoximetasone has the molecular formula C22H29FO4 and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-327-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (64980-327-15)  &gt; 15 g in 1 TUBE</PackageDescription>
    <NDC11Code>64980-0327-15</NDC11Code>
    <ProductNDC>64980-327</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desoximetasone</ProprietaryName>
    <NonProprietaryName>Desoximetasone</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20161201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204675</ApplicationNumber>
    <LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DESOXIMETASONE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Desoximetasone Ointment, 0.25% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
    <Description>Desoximetasone Ointment USP, 0.25% contains the active synthetic corticosteroid Desoximetasone. The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Each gram of Desoximetasone Ointment USP, 0.25% contains 2.5 mg of desoximetasone in an ointment base consisting of fractionated coconut oil and white petrolatum. The chemical name of Desoximetasone is Pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21dihydroxy-16-methyl-(11β, 16α)-. Desoximetasone has the molecular formula C22H29FO4 and a molecular weight of 376.47. The CAS registry number is 382-67-2. The structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-424-15</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (64980-424-15)  &gt; 15 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>64980-0424-15</NDC11Code>
    <ProductNDC>64980-424</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acetic Acid</ProprietaryName>
    <NonProprietaryName>Acetic Acid</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>AURICULAR (OTIC)</RouteName>
    <StartMarketingDate>20180314</StartMarketingDate>
    <EndMarketingDate>20231030</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207280</ApplicationNumber>
    <LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>ACETIC ACID</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2023-10-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20180314</StartMarketingDatePackage>
    <EndMarketingDatePackage>20231030</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>64980-447-15</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (64980-447-15)  / 15 mL in 1 BOTTLE, GLASS</PackageDescription>
    <NDC11Code>64980-0447-15</NDC11Code>
    <ProductNDC>64980-447</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcitriol</ProprietaryName>
    <NonProprietaryName>Calcitriol</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170321</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209798</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>CALCITRIOL</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Cholecalciferol [CS], Vitamin D3 Analog [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Predialysis Patients. Calcitriol Oral Solution is indicated in the management of secondary hyperparathyroidism and resultant metabolic bone disease in patients with moderate to severe chronic renal failure (Ccr 15 to 55 mL/min) not yet on dialysis. In children, the creatinine clearance value must be corrected for a surface area of 1.73 square meters. A serum iPTH level of ≥ 100 pg/mL is strongly suggestive of secondary hyperparathyroidism. Dialysis Patients. Calcitriol Oral Solution is indicated in the management of hypocalcemia and the resultant metabolic bone disease in patients undergoing chronic renal dialysis. In these patients, Calcitriol Oral Solution administration enhances calcium absorption, reduces serum alkaline phosphatase levels, and may reduce elevated parathyroid hormone levels and the histological manifestations of osteitis fibrosa cystica and defective mineralization. Hypoparathyroidism Patients. Calcitriol Oral Solution is also indicated in the management of hypocalcemia and its clinical manifestations in patients with postsurgical hypoparathyroidism, idiopathic hypoparathyroidism, and pseudohypoparathyroidism.</IndicationAndUsage>
    <Description>Calcitriol Oral Solution is a synthetic vitamin D analog which is active in the regulation of the absorption of calcium from the gastrointestinal tract and its utilization in the body. Calcitriol oral solution contains 1 mcg/mL of calcitriol. Calcitriol Oral Solution contains butylated hydroxyanisole (BHA) and butylated hydroxytoluene (BHT) as antioxidants. Calcitriol oral solution contains caprylic triglycerides. The oral solution contains no additional adjuvants or coloring principles. Calcitriol is a white, crystalline compound which occurs naturally in humans. It has a calculated molecular weight of 416.65 and is soluble in organic solvents but relatively insoluble in water. Chemically, calcitriol is 9,10-seco(5Z,7E)-5,7,10(19)-cholestatriene-1α, 3β, 25-triol and has the following structural formula. The other names frequently used for calcitriol are 1α,25-dihydroxycholecalciferol, 1,25-dihydroxyvitamin D3, 1,25-DHCC, 1,25(OH)2D3 and 1,25-diOHC.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-513-15</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (64980-513-15)  / 15 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>64980-0513-15</NDC11Code>
    <ProductNDC>64980-513</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Timolol Maleate</ProprietaryName>
    <NonProprietaryName>Timolol Maleate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20141215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077259</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>TIMOLOL MALEATE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Timolol maleate ophthalmic solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.</IndicationAndUsage>
    <Description>Timolol maleate ophthalmic solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of Timolol maleate is. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol maleate is stable at room temperature. Timolol maleate ophthalmic solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths: Each mL of timolol maleate ophthalmic solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). The pH of the solution is approximately 7, and the osmolarity is 274-328 mOsm/ Kg. Each mL of timolol maleate ophthalmic solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: monobasic and dibasic sodium phosphate, sodium chloride, sodium hydroxide to adjust pH, and water for injection. Benzalkonium chloride 0.01% is added as preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-514-15</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (64980-514-15)  / 15 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>64980-0514-15</NDC11Code>
    <ProductNDC>64980-514</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Timolol Maleate</ProprietaryName>
    <NonProprietaryName>Timolol Maleate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20141215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077259</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>TIMOLOL MALEATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Timolol maleate ophthalmic solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.</IndicationAndUsage>
    <Description>Timolol maleate ophthalmic solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of Timolol maleate is. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol maleate is stable at room temperature. Timolol maleate ophthalmic solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths: Each mL of timolol maleate ophthalmic solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). The pH of the solution is approximately 7, and the osmolarity is 274-328 mOsm/ Kg. Each mL of timolol maleate ophthalmic solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: monobasic and dibasic sodium phosphate, sodium chloride, sodium hydroxide to adjust pH, and water for injection. Benzalkonium chloride 0.01% is added as preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-658-15</NDCCode>
    <PackageDescription>150 TABLET in 1 BOTTLE (64980-658-15) </PackageDescription>
    <NDC11Code>64980-0658-15</NDC11Code>
    <ProductNDC>64980-658</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tizanidine</ProprietaryName>
    <NonProprietaryName>Tizanidine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218920</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tizanidine tablets are indicated for the treatment of spasticity in adults.</IndicationAndUsage>
    <Description>Tizanidine Hydrochloride, USP is a central alpha2-adrenergic agonist. Tizanidine Hydrochloride USP is a white to slightly yellow crystalline powder. Tizanidine Hydrochloride USP is sparingly soluble in water and methanol. Its chemical name is 5- chloro-4-(2- imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine's molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is. Tizanidine tablets are supplied as 2 mg and 4 mg tablets for oral administration. Tizanidine tablets contain the active ingredient, tizanidine hydrochloride USP (2.288 mg of tizanidine hydrochloride is equivalent to 2 mg tizanidine base, 4.576 mg of tizanidine hydrochloride is equivalent to 4 mg tizanidine base), and the inactive ingredients, colloidal silicon dioxide, stearic acid, microcrystalline cellulose and anhydrous lactose. The drug product meets the requirements of USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-659-15</NDCCode>
    <PackageDescription>150 TABLET in 1 BOTTLE (64980-659-15) </PackageDescription>
    <NDC11Code>64980-0659-15</NDC11Code>
    <ProductNDC>64980-659</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tizanidine</ProprietaryName>
    <NonProprietaryName>Tizanidine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218920</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tizanidine tablets are indicated for the treatment of spasticity in adults.</IndicationAndUsage>
    <Description>Tizanidine Hydrochloride, USP is a central alpha2-adrenergic agonist. Tizanidine Hydrochloride USP is a white to slightly yellow crystalline powder. Tizanidine Hydrochloride USP is sparingly soluble in water and methanol. Its chemical name is 5- chloro-4-(2- imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine's molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is. Tizanidine tablets are supplied as 2 mg and 4 mg tablets for oral administration. Tizanidine tablets contain the active ingredient, tizanidine hydrochloride USP (2.288 mg of tizanidine hydrochloride is equivalent to 2 mg tizanidine base, 4.576 mg of tizanidine hydrochloride is equivalent to 4 mg tizanidine base), and the inactive ingredients, colloidal silicon dioxide, stearic acid, microcrystalline cellulose and anhydrous lactose. The drug product meets the requirements of USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>16729-441-15</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (16729-441-15) </PackageDescription>
    <NDC11Code>16729-0441-15</NDC11Code>
    <ProductNDC>16729-441</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200616</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211892</ApplicationNumber>
    <LabelerName>Accord Healthcare, Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200619</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium-sensing receptor indicated for: 1 Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. ( 1.1) .</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. Its empirical formula for cinacalcet is C 22H 22F 3NHCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline solid that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: microcrystalline cellulose, crospovidone and magnesium stearate. Tablets are coated with hypromellose, titanium dioxide, triacetin FD&amp;C Blue No 2 and iron oxide yellow.</Description>
  </NDC>
  <NDC>
    <NDCCode>50268-441-15</NDCCode>
    <PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-441-15)  / 1 TABLET in 1 BLISTER PACK (50268-441-11) </PackageDescription>
    <NDC11Code>50268-0441-15</NDC11Code>
    <ProductNDC>50268-441</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Irbesartan</ProprietaryName>
    <NonProprietaryName>Irbesartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230808</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202910</ApplicationNumber>
    <LabelerName>AvPAK</LabelerName>
    <SubstanceName>IRBESARTAN</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-09-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230808</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1.1 Hypertension Irbesartan tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular (CV) events, primarily strokes and myocardial infarction. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention. Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Irbesartan tablets may be used alone or in combination with other antihypertensive agents. 1.2 Nephropathy in Type 2 Diabetic Patients Irbesartan tablets are indicated for the treatment of diabetic nephropathy in patients with type 2 diabetes and hypertension, an elevated serum creatinine, and proteinuria (&gt;300 mg/day). In this population, irbesartan reduces the rate of progression of nephropathy as measured by the occurrence of doubling of serum creatinine or end-stage renal disease (need for dialysis or renal transplantation) [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Irbesartan USP is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan USP is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its empirical formula is C 25H 28N 6O, and the structural formula: Irbesartan USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan is available for oral administration in unscored tablets containing 75 mg, 150 mg, or 300 mg of Irbesartan USP. Inactive ingredients include: calcium stearate, carboxy methyl cellulose calcium, colloidal silicon dioxide, microcrystalline cellulose and povidone.</Description>
  </NDC>
  <NDC>
    <NDCCode>55289-441-15</NDCCode>
    <PackageDescription>15 CAPSULE in 1 BOTTLE, PLASTIC (55289-441-15) </PackageDescription>
    <NDC11Code>55289-0441-15</NDC11Code>
    <ProductNDC>55289-441</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19900101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA063083</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-08-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>69842-441-02</NDCCode>
    <PackageDescription>2 BOTTLE, DROPPER in 1 CARTON (69842-441-02)  / 15 mL in 1 BOTTLE, DROPPER</PackageDescription>
    <NDC11Code>69842-0441-02</NDC11Code>
    <ProductNDC>69842-441</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Eye Allergy Relief</ProprietaryName>
    <NonProprietaryName>Naphazoline Hydrochloride And Pheniramine Maleate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20170201</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020065</ApplicationNumber>
    <LabelerName>CVS PHARMACY</LabelerName>
    <SubstanceName>NAPHAZOLINE HYDROCHLORIDE; PHENIRAMINE MALEATE</SubstanceName>
    <StrengthNumber>.2675; 3.15</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2026-09-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves itching and redness caused by pollen, ragweed, grass, animal hair and dander.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>69842-441-15</NDCCode>
    <PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (69842-441-15)  / 15 mL in 1 BOTTLE, DROPPER</PackageDescription>
    <NDC11Code>69842-0441-15</NDC11Code>
    <ProductNDC>69842-441</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Eye Allergy Relief</ProprietaryName>
    <NonProprietaryName>Naphazoline Hydrochloride And Pheniramine Maleate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20170201</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020065</ApplicationNumber>
    <LabelerName>CVS PHARMACY</LabelerName>
    <SubstanceName>NAPHAZOLINE HYDROCHLORIDE; PHENIRAMINE MALEATE</SubstanceName>
    <StrengthNumber>.2675; 3.15</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-09-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves itching and redness caused by pollen, ragweed, grass, animal hair and dander.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>70529-441-01</NDCCode>
    <PackageDescription>1 KIT in 1 PACKAGE (70529-441-01)  *  1.5 g in 1 PACKET (68345-883-50)  *  9 g in 1 PACKET (63517-160-01)  *  15 mL in 1 CUP, UNIT-DOSE (50383-775-15) </PackageDescription>
    <NDC11Code>70529-0441-01</NDC11Code>
    <ProductNDC>70529-441</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dx1 Oragenomic Medicated Dna Collection Screen</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20160501</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040014</ApplicationNumber>
    <LabelerName>IT3 Medical LLC</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2023-08-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71919-441-07</NDCCode>
    <PackageDescription>15 mL in 1 VIAL, GLASS (71919-441-07) </PackageDescription>
    <NDC11Code>71919-0441-07</NDC11Code>
    <ProductNDC>71919-441</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Manganum Metallicum</ProprietaryName>
    <NonProprietaryName>Manganese</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101207</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Washington Homeopathic Products</LabelerName>
    <SubstanceName>MANGANESE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[hp_C]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-03-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101207</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>83881-441-15</NDCCode>
    <PackageDescription>3 POUCH in 1 BOX (83881-441-15)  / 5 PATCH in 1 POUCH / 8500 mg in 1 PATCH</PackageDescription>
    <NDC11Code>83881-0441-15</NDC11Code>
    <ProductNDC>83881-441</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidothol</ProprietaryName>
    <NonProprietaryName>Lidocaine And Menthol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20240416</StartMarketingDate>
    <EndMarketingDate>20270531</EndMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Clinic Pharma</LabelerName>
    <SubstanceName>MENTHOL; LIDOCAINE</SubstanceName>
    <StrengthNumber>4; 1</StrengthNumber>
    <StrengthUnit>mg/100mg; mg/100mg</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20240416</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270531</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidothol is a formulation used to assist patients in the treatment of mild to moderate acute or chronic aches or pain. Muscle or joint pain can be due to muscle or ligament strains, simple backache, tendonitis, osteoarthritis, rheumatoid arthritis, peripheral neuropathies such as diabetic neuropathy or post herpetic neuralgia, and other complex regional pains. It can also be used to help with certain types of headaches, but use with caution when applying in order to avoid eye contact. Other uses may be considered if deemed clinically relevant.</IndicationAndUsage>
    <Description>Lidothol is a prescription topical patch, packaged with 15 medicated patches: 5 per re-sealable pouch, 3 pouches. Lidocaine is present in a 4% concentration (w/w). It is chemically designated as 2-­‐(diethylamino)-­‐N-­‐(2,6-­‐ dimethylphenyl) acetamide and has an empirical formula of C14H22N2O. The molecular weight of Lidocaine is 234.34 g/mol. Menthol is present in a 1% concentration (w/w). The chemical name is (1R,2S,5R)-­‐2-­‐isopropyl-­‐5-­‐methylcyclohexanol. The empirical formula for Menthol is C10H20O with a molecular weight of 156.27 g/mol. Lidothol (Lidocaine 4% / Menthol 1% Patch) consists of an adhesive hydrogel containing Lidocaine 4% and Menthol 1%, applied to flexible woven polyester backing and protected by a plastic film. The protective film is removed prior to application to the skin. The size of the patch is 12cm x 8cm. Lidocaine is chemically designated as 2-­‐(diethylamino)-­‐N-­‐(2,6-­‐dimethylphenyl), has an octanol: water partition ration of 43 at pH 7.4, and has the following structure. Menthol is chemically designated as 2-­‐Isopropyl-­‐5-­‐methylcyclohexanol. It contains colorless, hexagonal crystals, usually needle-­‐like; fused masses or crystalline powder with a pleasant, peppermint-­‐like odor. It has a melting point between 31°C to 36° C. Menthol has the following structure. Each adhesive patch contains 76.5mg of Lidocaine and 85mg of Menthol. It also contains the following inactive ingredients. dihydroxyaluminum aminoacetate, glycerol, methylparaben, polysorbate 80, propylene glycol, sodium polyacrylate, tartaric acid, water.</Description>
  </NDC>
  <NDC>
    <NDCCode>84756-441-02</NDCCode>
    <PackageDescription>15 g in 1 BOX (84756-441-02) </PackageDescription>
    <NDC11Code>84756-0441-02</NDC11Code>
    <ProductNDC>84756-441</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Trstay Collagen Day Cream</ProprietaryName>
    <NonProprietaryName>Trstay Collagen Day Cream</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20241124</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M016</ApplicationNumber>
    <LabelerName>Yiwu Xinqian E Commerce Co Ltd</LabelerName>
    <SubstanceName>NIACINAMIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>84827-441-02</NDCCode>
    <PackageDescription>15 g in 1 BOX (84827-441-02) </PackageDescription>
    <NDC11Code>84827-0441-02</NDC11Code>
    <ProductNDC>84827-441</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Trstay Mango Body Butter</ProprietaryName>
    <NonProprietaryName>Trstay Mango Body Butter</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20241107</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M016</ApplicationNumber>
    <LabelerName>Yiwu Yucheng E Commerce Co Ltd</LabelerName>
    <SubstanceName>NIACINAMIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>64980-209-01</NDCCode>
    <PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (64980-209-01) </PackageDescription>
    <NDC11Code>64980-0209-01</NDC11Code>
    <ProductNDC>64980-209</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxybutynin Chloride</ProprietaryName>
    <ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
    <NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160927</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206121</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160927</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxybutynin chloride extended-release tablets are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
    <Description>Oxybutynin chloride USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet USP contains 5 mg, 10 mg or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride is d,l (racemic) 4-diethylamino-2-butynylphenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C22H31NO3HCl. Its structural formula is. Oxybutynin chloride USP is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablet, USP also contains the following inert ingredients: polyethylene oxide, hypromellose, sodium chloride, butylated hydroxytoluene, ferric oxide (yellow), ferric oxide (red), ferric oxide (black), colloidal silicon dioxide, magnesium stearate, cellulose acetate, polyethylene glycol, titanium dioxide, lactose monohydrate, triacetin, shellac, and propylene glycol. System Components and Performance Oxybutynin chloride extended-release tablets USP uses osmotic pressure to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The system, which resembles a conventional tablet in appearance, comprises an osmotically active bilayer core surrounded by a semipermeable membrane. The bilayer core is composed of a drug layer containing the drug and excipients, and a push layer containing osmotically active components. There is a precision-laser drilled orifice in the semipermeable membrane on the drug-layer side of the tablet. In an aqueous environment, such as the gastrointestinal tract, water permeates through the membrane into the tablet core, causing the drug to go into suspension and the push layer to expand. This expansion pushes the suspended drug out through the orifice. The semipermeable membrane controls the rate at which water permeates into the tablet core, which in turn controls the rate of drug delivery. The controlled rate of drug delivery into the gastrointestinal lumen is thus independent of pH or gastrointestinal motility. The function of oxybutynin chloride extended-release tablets depends on the existence of an osmotic gradient between the contents of the bilayer core and the fluid in the gastrointestinal tract. Since the osmotic gradient remains constant, drug delivery remains essentially constant. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell. Product meets USP Dissolution Test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-209-03</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (64980-209-03) </PackageDescription>
    <NDC11Code>64980-0209-03</NDC11Code>
    <ProductNDC>64980-209</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxybutynin Chloride</ProprietaryName>
    <ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
    <NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160927</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206121</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxybutynin chloride extended-release tablets are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
    <Description>Oxybutynin chloride USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet USP contains 5 mg, 10 mg or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride is d,l (racemic) 4-diethylamino-2-butynylphenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C22H31NO3HCl. Its structural formula is. Oxybutynin chloride USP is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablet, USP also contains the following inert ingredients: polyethylene oxide, hypromellose, sodium chloride, butylated hydroxytoluene, ferric oxide (yellow), ferric oxide (red), ferric oxide (black), colloidal silicon dioxide, magnesium stearate, cellulose acetate, polyethylene glycol, titanium dioxide, lactose monohydrate, triacetin, shellac, and propylene glycol. System Components and Performance Oxybutynin chloride extended-release tablets USP uses osmotic pressure to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The system, which resembles a conventional tablet in appearance, comprises an osmotically active bilayer core surrounded by a semipermeable membrane. The bilayer core is composed of a drug layer containing the drug and excipients, and a push layer containing osmotically active components. There is a precision-laser drilled orifice in the semipermeable membrane on the drug-layer side of the tablet. In an aqueous environment, such as the gastrointestinal tract, water permeates through the membrane into the tablet core, causing the drug to go into suspension and the push layer to expand. This expansion pushes the suspended drug out through the orifice. The semipermeable membrane controls the rate at which water permeates into the tablet core, which in turn controls the rate of drug delivery. The controlled rate of drug delivery into the gastrointestinal lumen is thus independent of pH or gastrointestinal motility. The function of oxybutynin chloride extended-release tablets depends on the existence of an osmotic gradient between the contents of the bilayer core and the fluid in the gastrointestinal tract. Since the osmotic gradient remains constant, drug delivery remains essentially constant. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell. Product meets USP Dissolution Test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-209-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (64980-209-05) </PackageDescription>
    <NDC11Code>64980-0209-05</NDC11Code>
    <ProductNDC>64980-209</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxybutynin Chloride</ProprietaryName>
    <ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
    <NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160927</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206121</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxybutynin chloride extended-release tablets are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
    <Description>Oxybutynin chloride USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet USP contains 5 mg, 10 mg or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride is d,l (racemic) 4-diethylamino-2-butynylphenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C22H31NO3HCl. Its structural formula is. Oxybutynin chloride USP is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablet, USP also contains the following inert ingredients: polyethylene oxide, hypromellose, sodium chloride, butylated hydroxytoluene, ferric oxide (yellow), ferric oxide (red), ferric oxide (black), colloidal silicon dioxide, magnesium stearate, cellulose acetate, polyethylene glycol, titanium dioxide, lactose monohydrate, triacetin, shellac, and propylene glycol. System Components and Performance Oxybutynin chloride extended-release tablets USP uses osmotic pressure to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The system, which resembles a conventional tablet in appearance, comprises an osmotically active bilayer core surrounded by a semipermeable membrane. The bilayer core is composed of a drug layer containing the drug and excipients, and a push layer containing osmotically active components. There is a precision-laser drilled orifice in the semipermeable membrane on the drug-layer side of the tablet. In an aqueous environment, such as the gastrointestinal tract, water permeates through the membrane into the tablet core, causing the drug to go into suspension and the push layer to expand. This expansion pushes the suspended drug out through the orifice. The semipermeable membrane controls the rate at which water permeates into the tablet core, which in turn controls the rate of drug delivery. The controlled rate of drug delivery into the gastrointestinal lumen is thus independent of pH or gastrointestinal motility. The function of oxybutynin chloride extended-release tablets depends on the existence of an osmotic gradient between the contents of the bilayer core and the fluid in the gastrointestinal tract. Since the osmotic gradient remains constant, drug delivery remains essentially constant. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell. Product meets USP Dissolution Test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-210-01</NDCCode>
    <PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (64980-210-01) </PackageDescription>
    <NDC11Code>64980-0210-01</NDC11Code>
    <ProductNDC>64980-210</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxybutynin Chloride</ProprietaryName>
    <ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
    <NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160927</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206121</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160927</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxybutynin chloride extended-release tablets are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
    <Description>Oxybutynin chloride USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet USP contains 5 mg, 10 mg or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride is d,l (racemic) 4-diethylamino-2-butynylphenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C22H31NO3HCl. Its structural formula is. Oxybutynin chloride USP is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablet, USP also contains the following inert ingredients: polyethylene oxide, hypromellose, sodium chloride, butylated hydroxytoluene, ferric oxide (yellow), ferric oxide (red), ferric oxide (black), colloidal silicon dioxide, magnesium stearate, cellulose acetate, polyethylene glycol, titanium dioxide, lactose monohydrate, triacetin, shellac, and propylene glycol. System Components and Performance Oxybutynin chloride extended-release tablets USP uses osmotic pressure to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The system, which resembles a conventional tablet in appearance, comprises an osmotically active bilayer core surrounded by a semipermeable membrane. The bilayer core is composed of a drug layer containing the drug and excipients, and a push layer containing osmotically active components. There is a precision-laser drilled orifice in the semipermeable membrane on the drug-layer side of the tablet. In an aqueous environment, such as the gastrointestinal tract, water permeates through the membrane into the tablet core, causing the drug to go into suspension and the push layer to expand. This expansion pushes the suspended drug out through the orifice. The semipermeable membrane controls the rate at which water permeates into the tablet core, which in turn controls the rate of drug delivery. The controlled rate of drug delivery into the gastrointestinal lumen is thus independent of pH or gastrointestinal motility. The function of oxybutynin chloride extended-release tablets depends on the existence of an osmotic gradient between the contents of the bilayer core and the fluid in the gastrointestinal tract. Since the osmotic gradient remains constant, drug delivery remains essentially constant. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell. Product meets USP Dissolution Test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-210-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (64980-210-05) </PackageDescription>
    <NDC11Code>64980-0210-05</NDC11Code>
    <ProductNDC>64980-210</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxybutynin Chloride</ProprietaryName>
    <ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
    <NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160927</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206121</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxybutynin chloride extended-release tablets are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
    <Description>Oxybutynin chloride USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet USP contains 5 mg, 10 mg or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride is d,l (racemic) 4-diethylamino-2-butynylphenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C22H31NO3HCl. Its structural formula is. Oxybutynin chloride USP is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablet, USP also contains the following inert ingredients: polyethylene oxide, hypromellose, sodium chloride, butylated hydroxytoluene, ferric oxide (yellow), ferric oxide (red), ferric oxide (black), colloidal silicon dioxide, magnesium stearate, cellulose acetate, polyethylene glycol, titanium dioxide, lactose monohydrate, triacetin, shellac, and propylene glycol. System Components and Performance Oxybutynin chloride extended-release tablets USP uses osmotic pressure to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The system, which resembles a conventional tablet in appearance, comprises an osmotically active bilayer core surrounded by a semipermeable membrane. The bilayer core is composed of a drug layer containing the drug and excipients, and a push layer containing osmotically active components. There is a precision-laser drilled orifice in the semipermeable membrane on the drug-layer side of the tablet. In an aqueous environment, such as the gastrointestinal tract, water permeates through the membrane into the tablet core, causing the drug to go into suspension and the push layer to expand. This expansion pushes the suspended drug out through the orifice. The semipermeable membrane controls the rate at which water permeates into the tablet core, which in turn controls the rate of drug delivery. The controlled rate of drug delivery into the gastrointestinal lumen is thus independent of pH or gastrointestinal motility. The function of oxybutynin chloride extended-release tablets depends on the existence of an osmotic gradient between the contents of the bilayer core and the fluid in the gastrointestinal tract. Since the osmotic gradient remains constant, drug delivery remains essentially constant. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell. Product meets USP Dissolution Test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-211-01</NDCCode>
    <PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (64980-211-01) </PackageDescription>
    <NDC11Code>64980-0211-01</NDC11Code>
    <ProductNDC>64980-211</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxybutynin Chloride</ProprietaryName>
    <ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
    <NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160927</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206121</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160927</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxybutynin chloride extended-release tablets are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
    <Description>Oxybutynin chloride USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet USP contains 5 mg, 10 mg or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride is d,l (racemic) 4-diethylamino-2-butynylphenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C22H31NO3HCl. Its structural formula is. Oxybutynin chloride USP is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablet, USP also contains the following inert ingredients: polyethylene oxide, hypromellose, sodium chloride, butylated hydroxytoluene, ferric oxide (yellow), ferric oxide (red), ferric oxide (black), colloidal silicon dioxide, magnesium stearate, cellulose acetate, polyethylene glycol, titanium dioxide, lactose monohydrate, triacetin, shellac, and propylene glycol. System Components and Performance Oxybutynin chloride extended-release tablets USP uses osmotic pressure to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The system, which resembles a conventional tablet in appearance, comprises an osmotically active bilayer core surrounded by a semipermeable membrane. The bilayer core is composed of a drug layer containing the drug and excipients, and a push layer containing osmotically active components. There is a precision-laser drilled orifice in the semipermeable membrane on the drug-layer side of the tablet. In an aqueous environment, such as the gastrointestinal tract, water permeates through the membrane into the tablet core, causing the drug to go into suspension and the push layer to expand. This expansion pushes the suspended drug out through the orifice. The semipermeable membrane controls the rate at which water permeates into the tablet core, which in turn controls the rate of drug delivery. The controlled rate of drug delivery into the gastrointestinal lumen is thus independent of pH or gastrointestinal motility. The function of oxybutynin chloride extended-release tablets depends on the existence of an osmotic gradient between the contents of the bilayer core and the fluid in the gastrointestinal tract. Since the osmotic gradient remains constant, drug delivery remains essentially constant. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell. Product meets USP Dissolution Test 6.</Description>
  </NDC>
</NDCList>