{
"NDC": [
{
"NDCCode": "64980-726-13",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (64980-726-13) / 3 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "64980-0726-13",
"ProductNDC": "64980-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209044",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260603",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.0. Azithromycin tablets USP are supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, hypromellose, titanium dioxide, talc, and polyethylene glycol."
},
{
"NDCCode": "50580-726-13",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (50580-726-13) > 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "50580-0726-13",
"ProductNDC": "50580-726",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Zyrtec Allergy",
"NonProprietaryName": "Cetirizine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019835",
"LabelerName": "Johnson & Johnson Consumer Inc., McNeil Consumer Healthcare Division",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2021-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20090321",
"SamplePackage": "N"
},
{
"NDCCode": "64980-726-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (64980-726-03) ",
"NDC11Code": "64980-0726-03",
"ProductNDC": "64980-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209044",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260603",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.0. Azithromycin tablets USP are supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, hypromellose, titanium dioxide, talc, and polyethylene glycol."
},
{
"NDCCode": "64980-204-13",
"PackageDescription": "3 CARTON in 1 BLISTER PACK (64980-204-13) > 3 TABLET, FILM COATED in 1 CARTON",
"NDC11Code": "64980-0204-13",
"ProductNDC": "64980-204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolmitriptan",
"NonProprietaryName": "Zolmitriptan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204232",
"LabelerName": "Rising Pharmaceuticals, Inc.",
"SubstanceName": "ZOLMITRIPTAN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20160104",
"SamplePackage": "N",
"IndicationAndUsage": "Zolmitriptan is indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: 1 Only use zolmitriptan if a clear diagnosis of migraine has been established. If a patient has no response to zolmitriptan treatment for the first migraine attack, reconsider the diagnosis of migraine before zolmitriptan is administered to treat any subsequent attacks., 2 Zolmitriptan is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of zolmitriptan have not been established for cluster headache.",
"Description": "Zolmitriptan tablets, USP contain zolmitriptan, which is a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino)ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure. The molecular formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to off-white crystalline powder that is practically insoluble in water. Zolmitriptan tablets are available as 2.5 mg (yellow) and 5 mg(pink) film coated tablets for oral administration. The film coated tablets contain anhydrous lactose, microcrystalline cellulose, sodium starch glycolate, magnesium stearate. In addition, following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, polyethylene glycol 4000, yellow iron oxide (2.5 mg strength) and hypromellose, titanium dioxide, talc, polyethylene glycol 6000 and red iron oxide (5 mg strength)."
},
{
"NDCCode": "64980-257-13",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (64980-257-13) > 3 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "64980-0257-13",
"ProductNDC": "64980-257",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolmitriptan",
"NonProprietaryName": "Zolmitriptan",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20170413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205074",
"LabelerName": "Rising Pharmaceuticals, Inc.",
"SubstanceName": "ZOLMITRIPTAN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20170413",
"SamplePackage": "N",
"IndicationAndUsage": "Zolmitriptan is indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use : 1 Only use zolmitriptan if a clear diagnosis of migraine has been established. If a patient has no response to zolmitriptan treatment for the first migraine attack, reconsider the diagnosis of migraine before zolmitriptan is administered to treat any subsequent attacks. , 2 Zolmitriptan is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of zolmitriptan have not been established for cluster headache.",
"Description": "Zolmitriptan orally disintegrating tablets, USP contain zolmitriptan, which is a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino)ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure. The empirical formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to off-white crystalline powder that is freely soluble in N,N-dimethyl formamide, dimethyl sulfoxide and practically insoluble in water. Zolmitriptan orally disintegrating tablets are available as 2.5 mg and 5 mg white to off-white uncoated tablets. The orally disintegrating tablets contain mannitol, microcrystalline cellulose, crospovidone, aspartame [see Warnings and Precautions (5.9)], sodium stearyl fumarate, colloidal silicon dioxide, magnesium stearate, orange flavor, modified food starch and triacetin."
},
{
"NDCCode": "16571-726-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (16571-726-01) ",
"NDC11Code": "16571-0726-01",
"ProductNDC": "16571-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorzoxazone",
"NonProprietaryName": "Chlorzoxazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213126",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "CHLORZOXAZONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220405",
"SamplePackage": "N",
"IndicationAndUsage": "Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.",
"Description": "For Painful Musculoskeletal ConditionsPRESCRIBING INFORMATIONDESCRIPTION Each 375 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg.Chemical Name: 5-Chloro-2-benzoxazolinone.Structural Formula. Molecular Formula: C7H4CINO2 Molecular Weight: 169.56 Chlorzoxazone USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients: anhydrous lactose, croscarmellose sodium, docusate sodium with sodium benzoate, magnesium stearate, microcrystalline cellulose and pregelatinized maize starch. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "16571-726-50",
"PackageDescription": "500 TABLET in 1 BOTTLE (16571-726-50) ",
"NDC11Code": "16571-0726-50",
"ProductNDC": "16571-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorzoxazone",
"NonProprietaryName": "Chlorzoxazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213126",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "CHLORZOXAZONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230428",
"SamplePackage": "N",
"IndicationAndUsage": "Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.",
"Description": "For Painful Musculoskeletal ConditionsPRESCRIBING INFORMATIONDESCRIPTION Each 375 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg.Chemical Name: 5-Chloro-2-benzoxazolinone.Structural Formula. Molecular Formula: C7H4CINO2 Molecular Weight: 169.56 Chlorzoxazone USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients: anhydrous lactose, croscarmellose sodium, docusate sodium with sodium benzoate, magnesium stearate, microcrystalline cellulose and pregelatinized maize starch. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "62037-726-01",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (62037-726-01) ",
"NDC11Code": "62037-0726-01",
"ProductNDC": "62037-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Hydrochloride",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190304",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076772",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "36",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190304",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate hydrochloride extended-release tablets are indicated for the treatment of attention deficit hyperactivity disorder (ADHD) in patients aged 6 to 65 years old. Limitations of Use The use of methylphenidate hydrochloride extended-release tablets are not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.7) and Use in Specific Populations (8.4)].",
"Description": "Methylphenidate hydrochloride extended-release tablets, USP are a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release tablets, USP are available in four strengths. Each extended-release tablet for oral administration contains 18 mg, 27 mg, 36 mg, or 54 mg of methylphenidate hydrochloride, USP. Chemically, methylphenidate hydrochloride, USP is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride, its molecular formula is C14H19NO2HCl, and its structural formula is:. Methylphenidate hydrochloride, USP is a white, odorless crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Methylphenidate hydrochloride extended-release tablets, USP also contain the following inert ingredients: colloidal silicon dioxide, fumaric acid, hypromellose 2208, hypromellose 2910, lactose monohydrate, magnesium stearate, methacrylic acid copolymer Type A, methacrylic acid copolymer Type B, talc, titanium dioxide, and triethyl citrate. The 18 mg strength also contains iron oxide red, iron oxide yellow, polyethylene glycol 3350, and polyvinyl alcohol. The 27 mg strength also contains FD&C Blue #2/Indigo Carmine Aluminum Lake, iron oxide black, iron oxide yellow, polyethylene glycol 3350, and polyvinyl alcohol. The 36 mg strength also contains triacetin. The 54 mg strength also contains iron oxide red, polyethylene glycol 3350, and polyvinyl alcohol. The imprinting ink contains ammonium hydroxide, iron oxide black, propylene glycol, and shellac. It is possible that methylphenidate hydrochloride extended-release tablets may be visible on abdominal x-rays under certain circumstances, especially when digital enhancing techniques are utilized. Meets USP Dissolution Test 11."
},
{
"NDCCode": "68462-726-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (68462-726-05) ",
"NDC11Code": "68462-0726-05",
"ProductNDC": "68462-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saxagliptin",
"NonProprietaryName": "Saxagliptin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205994",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "SAXAGLIPTIN HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230731",
"SamplePackage": "N",
"Description": "Saxagliptin is an orally-active inhibitor of the DPP-4 enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile hydrate. The empirical formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to off-white powder. It is soluble in methanol, ethanol; sparingly soluble in water. Each film-coated tablet of saxagliptin for oral use contains either 2.79 mg saxagliptin hydrochloride equivalent to 2.5 mg saxagliptin or 5.58 mg saxagliptin hydrochloride equivalent to 5 mg saxagliptin and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. In addition, the film coating contains the following inactive ingredients: hypromellose, iron oxide yellow (2.5 mg tablet only), iron oxide red (5 mg tablet only), polyethylene glycol and titanium dioxide. The imprinting ink contains the following: ammonium hydroxide, n-butyl alcohol, FD&C blue #2, isopropyl alcohol, propylene glycol and shellac."
},
{
"NDCCode": "68462-726-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (68462-726-30) ",
"NDC11Code": "68462-0726-30",
"ProductNDC": "68462-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saxagliptin",
"NonProprietaryName": "Saxagliptin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205994",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "SAXAGLIPTIN HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230731",
"SamplePackage": "N",
"Description": "Saxagliptin is an orally-active inhibitor of the DPP-4 enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile hydrate. The empirical formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to off-white powder. It is soluble in methanol, ethanol; sparingly soluble in water. Each film-coated tablet of saxagliptin for oral use contains either 2.79 mg saxagliptin hydrochloride equivalent to 2.5 mg saxagliptin or 5.58 mg saxagliptin hydrochloride equivalent to 5 mg saxagliptin and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. In addition, the film coating contains the following inactive ingredients: hypromellose, iron oxide yellow (2.5 mg tablet only), iron oxide red (5 mg tablet only), polyethylene glycol and titanium dioxide. The imprinting ink contains the following: ammonium hydroxide, n-butyl alcohol, FD&C blue #2, isopropyl alcohol, propylene glycol and shellac."
},
{
"NDCCode": "68462-726-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68462-726-90) ",
"NDC11Code": "68462-0726-90",
"ProductNDC": "68462-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saxagliptin",
"NonProprietaryName": "Saxagliptin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205994",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "SAXAGLIPTIN HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230731",
"SamplePackage": "N",
"Description": "Saxagliptin is an orally-active inhibitor of the DPP-4 enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile hydrate. The empirical formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to off-white powder. It is soluble in methanol, ethanol; sparingly soluble in water. Each film-coated tablet of saxagliptin for oral use contains either 2.79 mg saxagliptin hydrochloride equivalent to 2.5 mg saxagliptin or 5.58 mg saxagliptin hydrochloride equivalent to 5 mg saxagliptin and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. In addition, the film coating contains the following inactive ingredients: hypromellose, iron oxide yellow (2.5 mg tablet only), iron oxide red (5 mg tablet only), polyethylene glycol and titanium dioxide. The imprinting ink contains the following: ammonium hydroxide, n-butyl alcohol, FD&C blue #2, isopropyl alcohol, propylene glycol and shellac."
},
{
"NDCCode": "69882-726-01",
"PackageDescription": "266.16 mL in 1 BOTTLE (69882-726-01) ",
"NDC11Code": "69882-0726-01",
"ProductNDC": "69882-726",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Signature Black Bottle Tea Tree Antifungal Foot And Body Wash",
"NonProprietaryName": "Tolnaftate",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160210",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M005",
"LabelerName": "Restoration Rockstar, Llc (dba: Kroning Signature Black Bottle)",
"SubstanceName": "TOLNAFTATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2023-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160210",
"SamplePackage": "N",
"IndicationAndUsage": "Proven clinically effective in the treatment of most athlete's foot (tinea pedis) and ringworm (tinea corporis). Helps prevent most athlete's foot with daily use. For effective relief of itching, burning and cracking."
},
{
"NDCCode": "71205-726-15",
"PackageDescription": "1 POUCH in 1 BAG (71205-726-15) > 5 VIAL in 1 POUCH > 3 mL in 1 VIAL",
"NDC11Code": "71205-0726-15",
"ProductNDC": "71205-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"NonProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20211115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207875",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "IPRATROPIUM BROMIDE; ALBUTEROL SULFATE",
"StrengthNumber": ".5; 2.5",
"StrengthUnit": "mg/3mL; mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221201",
"SamplePackage": "N",
"IndicationAndUsage": "Ipratropium bromide and albuterol sulfate inhalation solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.",
"Description": "The active components in ipratropium bromide and albuterol sulfate inhalation solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate, is a salt of racemic albuterol and a relatively selective β2-adrenergic bronchodilator chemically described as α1 -[(tert-butylamino)methyl]-4-hydroxy-m‑-xylene-α, α'-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the molecular formula is (C13H21NO3)2H2SO4. It is a white or practically white powder, soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Figure 3 1-1. Chemical structure of albuterol sulfate. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-‑azoniabicyclo [3.2.1]-octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8methyl-8-(1‑methylethyl)-, bromide, monohydrate (endo, syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the molecular formula is C20H30BrNO3H2O. It is a white to off-white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Figure 3. 1-2. Chemical structure of ipratropium bromide. Each 3 mL vial of ipratropium bromide and albuterol sulfate inhalation solution contains 3 mg (0.1%) of albuterol sulfate USP (equivalent to 2.5 mg (0.083%) of albuterol base) and 0.5 mg (0.017%) of ipratropium bromide USP in an isotonic, sterile, aqueous solution containing sodium chloride, hydrochloric acid to adjust to pH 4, edetate disodium, USP (a chelating agent) and water for injection. Ipratropium bromide and albuterol sulfate inhalation solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For ipratropium bromide and albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium bromide and albuterol sulfate inhalation solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION)."
},
{
"NDCCode": "72450-711-02",
"PackageDescription": "726 kg in 1 SUPERSACK (72450-711-02) ",
"NDC11Code": "72450-0711-02",
"ProductNDC": "72450-711",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "POWDER",
"StartMarketingDate": "20180413",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Elementis SRL, Inc.",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2026-03-16",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "13-APR-18"
},
{
"NDCCode": "72450-723-01",
"PackageDescription": "726 kg in 1 SUPERSACK (72450-723-01) ",
"NDC11Code": "72450-0723-01",
"ProductNDC": "72450-723",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "POWDER",
"StartMarketingDate": "20180413",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Elementis SRL, Inc.",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2026-03-25",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "13-APR-18"
},
{
"NDCCode": "72450-726-01",
"PackageDescription": "250 kg in 1 DRUM (72450-726-01) ",
"NDC11Code": "72450-0726-01",
"ProductNDC": "72450-726",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "SOLUTION",
"StartMarketingDate": "20180413",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Elementis SRL, Inc.",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": ".34",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2023-10-12",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "13-APR-18"
},
{
"NDCCode": "72450-726-02",
"PackageDescription": "1000 kg in 1 CONTAINER (72450-726-02) ",
"NDC11Code": "72450-0726-02",
"ProductNDC": "72450-726",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "SOLUTION",
"StartMarketingDate": "20180413",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Elementis SRL, Inc.",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": ".34",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2023-10-12",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "13-APR-18"
},
{
"NDCCode": "72450-726-03",
"PackageDescription": "1125 kg in 1 CONTAINER (72450-726-03) ",
"NDC11Code": "72450-0726-03",
"ProductNDC": "72450-726",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "SOLUTION",
"StartMarketingDate": "20180413",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Elementis SRL, Inc.",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": ".34",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2023-10-12",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "13-APR-18"
},
{
"NDCCode": "87069-726-62",
"PackageDescription": "6 POUCH in 1 CARTON (87069-726-62) / 3 BAG in 1 POUCH / 63 mL in 1 BAG",
"NDC11Code": "87069-0726-62",
"ProductNDC": "87069-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leukotrap Wb System - Cp2d",
"NonProprietaryName": "Cp2d/as-3 Anticoagulant And Additive System",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260602",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN820915",
"LabelerName": "GVS TM INC",
"SubstanceName": "DEXTROSE, UNSPECIFIED FORM",
"StrengthNumber": "3.21",
"StrengthUnit": "g/63mL",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260602",
"SamplePackage": "N",
"Description": "CP2D/AS-3 Blood Bag Unit with In-Line WBF Filter (WBF2) and Sampling System."
},
{
"NDCCode": "64980-104-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (64980-104-01) ",
"NDC11Code": "64980-0104-01",
"ProductNDC": "64980-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dibasic Sodium Phosphate, Monobasic Potassium Phosphate And Monobasic Sodium Phosphate",
"NonProprietaryName": "Dibasic Sodium Phosphate, Monobasic Potassium Phosphate And Monobasic Sodium Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120628",
"EndMarketingDate": "20281231",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "SODIUM PHOSPHATE, DIBASIC, ANHYDROUS; POTASSIUM PHOSPHATE, MONOBASIC; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE",
"StrengthNumber": "852; 155; 130",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Active",
"LastUpdate": "2026-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120628",
"EndMarketingDatePackage": "20281231",
"SamplePackage": "N",
"IndicationAndUsage": "PHOSPHA 250TM NEUTRAL increases urinary phosphate and pyrophosphate. As a phosphorus supplement, each tablet supplies 25% of the U.S. Recommended Daily Allowance (U.S. RDA) of phosphorus for adults and children over 4 years of age.",
"Description": "Each tablet contains 852 mg dibasic sodium phosphate anhydrous, 155 mg monobasic potassium phosphate, and 130 mg monobasic sodium phosphate monohydrate. Each tablet yields approximately 250 mg of phosphorus, 298 mg of sodium (13.0 mEq) and 45 mg of potassium (1 .1 mEq)."
},
{
"NDCCode": "64980-325-15",
"PackageDescription": "1 TUBE in 1 CARTON (64980-325-15) > 15 g in 1 TUBE",
"NDC11Code": "64980-0325-15",
"ProductNDC": "64980-325",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nystatin And Triamcinolone Acetonide",
"NonProprietaryName": "Nystatin And Triamcinolone Acetonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206785",
"LabelerName": "Rising Pharmaceuticals, Inc.",
"SubstanceName": "NYSTATIN; TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "100000; 1",
"StrengthUnit": "[USP'U]/g; mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180215",
"SamplePackage": "N",
"IndicationAndUsage": "Nystatin and Triamcinolone Acetonide Ointment is indicated for the treatment of cutaneous candidiasis; it has been demonstrated that the nystatin-steroid combination provides greater benefit than the nystatin component alone during the first few days of treatment.",
"Description": "Nystatin and Triamcinolone Acetonide Ointment for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder with a cereallike odor, very slightly soluble in water, and slightly to sparingly soluble in alcohol. Structural formula. C47H75NO17 MW = 926.13. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The white to cream crystalline powder has a slight odor, is practically insoluble in water, and very soluble in alcohol. Structural formula. C24H31FO6 MW = 434.50. Each gram of Nystatin and Triamcinolone Acetonide Ointment provides 100,000 USP Nystatin units and 1 mg Triamcinolone Acetonide in an ointment base of mineral oil and polyethylene."
},
{
"NDCCode": "64980-325-30",
"PackageDescription": "1 TUBE in 1 CARTON (64980-325-30) > 30 g in 1 TUBE",
"NDC11Code": "64980-0325-30",
"ProductNDC": "64980-325",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nystatin And Triamcinolone Acetonide",
"NonProprietaryName": "Nystatin And Triamcinolone Acetonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206785",
"LabelerName": "Rising Pharmaceuticals, Inc.",
"SubstanceName": "NYSTATIN; TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "100000; 1",
"StrengthUnit": "[USP'U]/g; mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180215",
"SamplePackage": "N",
"IndicationAndUsage": "Nystatin and Triamcinolone Acetonide Ointment is indicated for the treatment of cutaneous candidiasis; it has been demonstrated that the nystatin-steroid combination provides greater benefit than the nystatin component alone during the first few days of treatment.",
"Description": "Nystatin and Triamcinolone Acetonide Ointment for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder with a cereallike odor, very slightly soluble in water, and slightly to sparingly soluble in alcohol. Structural formula. C47H75NO17 MW = 926.13. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The white to cream crystalline powder has a slight odor, is practically insoluble in water, and very soluble in alcohol. Structural formula. C24H31FO6 MW = 434.50. Each gram of Nystatin and Triamcinolone Acetonide Ointment provides 100,000 USP Nystatin units and 1 mg Triamcinolone Acetonide in an ointment base of mineral oil and polyethylene."
},
{
"NDCCode": "64980-325-60",
"PackageDescription": "1 TUBE in 1 CARTON (64980-325-60) > 60 g in 1 TUBE",
"NDC11Code": "64980-0325-60",
"ProductNDC": "64980-325",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nystatin And Triamcinolone Acetonide",
"NonProprietaryName": "Nystatin And Triamcinolone Acetonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206785",
"LabelerName": "Rising Pharmaceuticals, Inc.",
"SubstanceName": "NYSTATIN; TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "100000; 1",
"StrengthUnit": "[USP'U]/g; mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180215",
"SamplePackage": "N",
"IndicationAndUsage": "Nystatin and Triamcinolone Acetonide Ointment is indicated for the treatment of cutaneous candidiasis; it has been demonstrated that the nystatin-steroid combination provides greater benefit than the nystatin component alone during the first few days of treatment.",
"Description": "Nystatin and Triamcinolone Acetonide Ointment for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder with a cereallike odor, very slightly soluble in water, and slightly to sparingly soluble in alcohol. Structural formula. C47H75NO17 MW = 926.13. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The white to cream crystalline powder has a slight odor, is practically insoluble in water, and very soluble in alcohol. Structural formula. C24H31FO6 MW = 434.50. Each gram of Nystatin and Triamcinolone Acetonide Ointment provides 100,000 USP Nystatin units and 1 mg Triamcinolone Acetonide in an ointment base of mineral oil and polyethylene."
},
{
"NDCCode": "64980-328-01",
"PackageDescription": "23.3 g in 1 JAR (64980-328-01) ",
"NDC11Code": "64980-0328-01",
"ProductNDC": "64980-328",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erythromycin And Benzoyl Peroxide",
"NonProprietaryName": "Erythromycin And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20161018",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065385",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "ERYTHROMYCIN; BENZOYL PEROXIDE",
"StrengthNumber": "30; 50",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2025-09-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161018",
"SamplePackage": "N",
"IndicationAndUsage": "Erythromycin and Benzoyl Peroxide Topical Gel USP is indicated for the topical treatment of acne vulgaris.",
"Description": "Erythromycin and Benzoyl Peroxide Topical Gel USP contains erythromycin [(3R*, 4S*, 5S*, 6R*, 7R*, 9R*, 11R*, 12R*, 13S*, 14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-0-methyl-α-L-ribo-hexopyranosyl)-oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione]. Erythromycin is a macrolide antibiotic produced from a strain of Saccharopolyspora erythraea (formerly Streptomyces erythreus). It is a base and readily forms salts with acids. Chemically, erythromycin is (C37H67NO13). It has the following structural formula. Erythromycin has the molecular weight of 733.94. It is a white crystalline powder and has a solubility of approximately 1 mg/mL in water and is soluble in alcohol at 25˚C. Erythromycin and Benzoyl Peroxide Topical Gel USP also contains benzoyl peroxide for topical use. Benzoyl peroxide is an antibacterial and keratolytic agent. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has the molecular weight of 242.23. It is a white granular powder and is sparingly soluble in water and alcohol and soluble in acetone, chloroform and ether. Each gram of Erythromycin and Benzoyl Peroxide Topical Gel USP contains, as dispensed, 30 mg (3%) of erythromycin and 50 mg (5%) of benzoyl peroxide in a base of purified water USP, carbomer 940 NF, ethyl alcohol 20%, sodium hydroxide NF, docusate sodium and fragrance."
},
{
"NDCCode": "64980-328-02",
"PackageDescription": "46.6 g in 1 JAR (64980-328-02) ",
"NDC11Code": "64980-0328-02",
"ProductNDC": "64980-328",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erythromycin And Benzoyl Peroxide",
"NonProprietaryName": "Erythromycin And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20161018",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065385",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "ERYTHROMYCIN; BENZOYL PEROXIDE",
"StrengthNumber": "30; 50",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2025-09-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161018",
"SamplePackage": "N",
"IndicationAndUsage": "Erythromycin and Benzoyl Peroxide Topical Gel USP is indicated for the topical treatment of acne vulgaris.",
"Description": "Erythromycin and Benzoyl Peroxide Topical Gel USP contains erythromycin [(3R*, 4S*, 5S*, 6R*, 7R*, 9R*, 11R*, 12R*, 13S*, 14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-0-methyl-α-L-ribo-hexopyranosyl)-oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione]. Erythromycin is a macrolide antibiotic produced from a strain of Saccharopolyspora erythraea (formerly Streptomyces erythreus). It is a base and readily forms salts with acids. Chemically, erythromycin is (C37H67NO13). It has the following structural formula. Erythromycin has the molecular weight of 733.94. It is a white crystalline powder and has a solubility of approximately 1 mg/mL in water and is soluble in alcohol at 25˚C. Erythromycin and Benzoyl Peroxide Topical Gel USP also contains benzoyl peroxide for topical use. Benzoyl peroxide is an antibacterial and keratolytic agent. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has the molecular weight of 242.23. It is a white granular powder and is sparingly soluble in water and alcohol and soluble in acetone, chloroform and ether. Each gram of Erythromycin and Benzoyl Peroxide Topical Gel USP contains, as dispensed, 30 mg (3%) of erythromycin and 50 mg (5%) of benzoyl peroxide in a base of purified water USP, carbomer 940 NF, ethyl alcohol 20%, sodium hydroxide NF, docusate sodium and fragrance."
},
{
"NDCCode": "64980-340-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (64980-340-01) ",
"NDC11Code": "64980-0340-01",
"ProductNDC": "64980-340",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090124",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080804",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone.Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "64980-340-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (64980-340-03) ",
"NDC11Code": "64980-0340-03",
"ProductNDC": "64980-340",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090124",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080804",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone.Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "64980-341-12",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (64980-341-12) / 4 TABLET in 1 BLISTER PACK",
"NDC11Code": "64980-0341-12",
"ProductNDC": "64980-341",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090124",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "35",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080804",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone.Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "64980-341-14",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (64980-341-14) / 4 TABLET in 1 BLISTER PACK",
"NDC11Code": "64980-0341-14",
"ProductNDC": "64980-341",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090124",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "35",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080804",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone.Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "64980-342-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (64980-342-01) ",
"NDC11Code": "64980-0342-01",
"ProductNDC": "64980-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090124",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "70",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone.Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>64980-726-13</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (64980-726-13) / 3 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64980-0726-13</NDC11Code>
<ProductNDC>64980-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209044</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.0. Azithromycin tablets USP are supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, hypromellose, titanium dioxide, talc, and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>50580-726-13</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (50580-726-13) > 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>50580-0726-13</NDC11Code>
<ProductNDC>50580-726</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Zyrtec Allergy</ProprietaryName>
<NonProprietaryName>Cetirizine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019835</ApplicationNumber>
<LabelerName>Johnson & Johnson Consumer Inc., McNeil Consumer Healthcare Division</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090321</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64980-726-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (64980-726-03) </PackageDescription>
<NDC11Code>64980-0726-03</NDC11Code>
<ProductNDC>64980-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209044</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.0. Azithromycin tablets USP are supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, hypromellose, titanium dioxide, talc, and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>64980-204-13</NDCCode>
<PackageDescription>3 CARTON in 1 BLISTER PACK (64980-204-13) > 3 TABLET, FILM COATED in 1 CARTON</PackageDescription>
<NDC11Code>64980-0204-13</NDC11Code>
<ProductNDC>64980-204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolmitriptan</ProprietaryName>
<NonProprietaryName>Zolmitriptan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204232</ApplicationNumber>
<LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ZOLMITRIPTAN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Zolmitriptan is indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: 1 Only use zolmitriptan if a clear diagnosis of migraine has been established. If a patient has no response to zolmitriptan treatment for the first migraine attack, reconsider the diagnosis of migraine before zolmitriptan is administered to treat any subsequent attacks., 2 Zolmitriptan is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of zolmitriptan have not been established for cluster headache.</IndicationAndUsage>
<Description>Zolmitriptan tablets, USP contain zolmitriptan, which is a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino)ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure. The molecular formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to off-white crystalline powder that is practically insoluble in water. Zolmitriptan tablets are available as 2.5 mg (yellow) and 5 mg(pink) film coated tablets for oral administration. The film coated tablets contain anhydrous lactose, microcrystalline cellulose, sodium starch glycolate, magnesium stearate. In addition, following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, polyethylene glycol 4000, yellow iron oxide (2.5 mg strength) and hypromellose, titanium dioxide, talc, polyethylene glycol 6000 and red iron oxide (5 mg strength).</Description>
</NDC>
<NDC>
<NDCCode>64980-257-13</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (64980-257-13) > 3 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64980-0257-13</NDC11Code>
<ProductNDC>64980-257</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolmitriptan</ProprietaryName>
<NonProprietaryName>Zolmitriptan</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205074</ApplicationNumber>
<LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ZOLMITRIPTAN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Zolmitriptan is indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use : 1 Only use zolmitriptan if a clear diagnosis of migraine has been established. If a patient has no response to zolmitriptan treatment for the first migraine attack, reconsider the diagnosis of migraine before zolmitriptan is administered to treat any subsequent attacks. , 2 Zolmitriptan is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of zolmitriptan have not been established for cluster headache.</IndicationAndUsage>
<Description>Zolmitriptan orally disintegrating tablets, USP contain zolmitriptan, which is a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino)ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure. The empirical formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to off-white crystalline powder that is freely soluble in N,N-dimethyl formamide, dimethyl sulfoxide and practically insoluble in water. Zolmitriptan orally disintegrating tablets are available as 2.5 mg and 5 mg white to off-white uncoated tablets. The orally disintegrating tablets contain mannitol, microcrystalline cellulose, crospovidone, aspartame [see Warnings and Precautions (5.9)], sodium stearyl fumarate, colloidal silicon dioxide, magnesium stearate, orange flavor, modified food starch and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>16571-726-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (16571-726-01) </PackageDescription>
<NDC11Code>16571-0726-01</NDC11Code>
<ProductNDC>16571-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorzoxazone</ProprietaryName>
<NonProprietaryName>Chlorzoxazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213126</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>CHLORZOXAZONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>For Painful Musculoskeletal ConditionsPRESCRIBING INFORMATIONDESCRIPTION Each 375 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg.Chemical Name: 5-Chloro-2-benzoxazolinone.Structural Formula. Molecular Formula: C7H4CINO2 Molecular Weight: 169.56 Chlorzoxazone USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients: anhydrous lactose, croscarmellose sodium, docusate sodium with sodium benzoate, magnesium stearate, microcrystalline cellulose and pregelatinized maize starch. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>16571-726-50</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (16571-726-50) </PackageDescription>
<NDC11Code>16571-0726-50</NDC11Code>
<ProductNDC>16571-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorzoxazone</ProprietaryName>
<NonProprietaryName>Chlorzoxazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213126</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>CHLORZOXAZONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230428</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>For Painful Musculoskeletal ConditionsPRESCRIBING INFORMATIONDESCRIPTION Each 375 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg.Chemical Name: 5-Chloro-2-benzoxazolinone.Structural Formula. Molecular Formula: C7H4CINO2 Molecular Weight: 169.56 Chlorzoxazone USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients: anhydrous lactose, croscarmellose sodium, docusate sodium with sodium benzoate, magnesium stearate, microcrystalline cellulose and pregelatinized maize starch. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>62037-726-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (62037-726-01) </PackageDescription>
<NDC11Code>62037-0726-01</NDC11Code>
<ProductNDC>62037-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190304</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076772</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>36</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate hydrochloride extended-release tablets are indicated for the treatment of attention deficit hyperactivity disorder (ADHD) in patients aged 6 to 65 years old. Limitations of Use The use of methylphenidate hydrochloride extended-release tablets are not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.7) and Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Methylphenidate hydrochloride extended-release tablets, USP are a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release tablets, USP are available in four strengths. Each extended-release tablet for oral administration contains 18 mg, 27 mg, 36 mg, or 54 mg of methylphenidate hydrochloride, USP. Chemically, methylphenidate hydrochloride, USP is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride, its molecular formula is C14H19NO2HCl, and its structural formula is:. Methylphenidate hydrochloride, USP is a white, odorless crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Methylphenidate hydrochloride extended-release tablets, USP also contain the following inert ingredients: colloidal silicon dioxide, fumaric acid, hypromellose 2208, hypromellose 2910, lactose monohydrate, magnesium stearate, methacrylic acid copolymer Type A, methacrylic acid copolymer Type B, talc, titanium dioxide, and triethyl citrate. The 18 mg strength also contains iron oxide red, iron oxide yellow, polyethylene glycol 3350, and polyvinyl alcohol. The 27 mg strength also contains FD&C Blue #2/Indigo Carmine Aluminum Lake, iron oxide black, iron oxide yellow, polyethylene glycol 3350, and polyvinyl alcohol. The 36 mg strength also contains triacetin. The 54 mg strength also contains iron oxide red, polyethylene glycol 3350, and polyvinyl alcohol. The imprinting ink contains ammonium hydroxide, iron oxide black, propylene glycol, and shellac. It is possible that methylphenidate hydrochloride extended-release tablets may be visible on abdominal x-rays under certain circumstances, especially when digital enhancing techniques are utilized. Meets USP Dissolution Test 11.</Description>
</NDC>
<NDC>
<NDCCode>68462-726-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (68462-726-05) </PackageDescription>
<NDC11Code>68462-0726-05</NDC11Code>
<ProductNDC>68462-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saxagliptin</ProprietaryName>
<NonProprietaryName>Saxagliptin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205994</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>SAXAGLIPTIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Saxagliptin is an orally-active inhibitor of the DPP-4 enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile hydrate. The empirical formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to off-white powder. It is soluble in methanol, ethanol; sparingly soluble in water. Each film-coated tablet of saxagliptin for oral use contains either 2.79 mg saxagliptin hydrochloride equivalent to 2.5 mg saxagliptin or 5.58 mg saxagliptin hydrochloride equivalent to 5 mg saxagliptin and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. In addition, the film coating contains the following inactive ingredients: hypromellose, iron oxide yellow (2.5 mg tablet only), iron oxide red (5 mg tablet only), polyethylene glycol and titanium dioxide. The imprinting ink contains the following: ammonium hydroxide, n-butyl alcohol, FD&C blue #2, isopropyl alcohol, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-726-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (68462-726-30) </PackageDescription>
<NDC11Code>68462-0726-30</NDC11Code>
<ProductNDC>68462-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saxagliptin</ProprietaryName>
<NonProprietaryName>Saxagliptin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205994</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>SAXAGLIPTIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Saxagliptin is an orally-active inhibitor of the DPP-4 enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile hydrate. The empirical formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to off-white powder. It is soluble in methanol, ethanol; sparingly soluble in water. Each film-coated tablet of saxagliptin for oral use contains either 2.79 mg saxagliptin hydrochloride equivalent to 2.5 mg saxagliptin or 5.58 mg saxagliptin hydrochloride equivalent to 5 mg saxagliptin and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. In addition, the film coating contains the following inactive ingredients: hypromellose, iron oxide yellow (2.5 mg tablet only), iron oxide red (5 mg tablet only), polyethylene glycol and titanium dioxide. The imprinting ink contains the following: ammonium hydroxide, n-butyl alcohol, FD&C blue #2, isopropyl alcohol, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-726-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68462-726-90) </PackageDescription>
<NDC11Code>68462-0726-90</NDC11Code>
<ProductNDC>68462-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saxagliptin</ProprietaryName>
<NonProprietaryName>Saxagliptin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205994</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>SAXAGLIPTIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Saxagliptin is an orally-active inhibitor of the DPP-4 enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile hydrate. The empirical formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to off-white powder. It is soluble in methanol, ethanol; sparingly soluble in water. Each film-coated tablet of saxagliptin for oral use contains either 2.79 mg saxagliptin hydrochloride equivalent to 2.5 mg saxagliptin or 5.58 mg saxagliptin hydrochloride equivalent to 5 mg saxagliptin and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. In addition, the film coating contains the following inactive ingredients: hypromellose, iron oxide yellow (2.5 mg tablet only), iron oxide red (5 mg tablet only), polyethylene glycol and titanium dioxide. The imprinting ink contains the following: ammonium hydroxide, n-butyl alcohol, FD&C blue #2, isopropyl alcohol, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>69882-726-01</NDCCode>
<PackageDescription>266.16 mL in 1 BOTTLE (69882-726-01) </PackageDescription>
<NDC11Code>69882-0726-01</NDC11Code>
<ProductNDC>69882-726</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Signature Black Bottle Tea Tree Antifungal Foot And Body Wash</ProprietaryName>
<NonProprietaryName>Tolnaftate</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160210</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M005</ApplicationNumber>
<LabelerName>Restoration Rockstar, Llc (dba: Kroning Signature Black Bottle)</LabelerName>
<SubstanceName>TOLNAFTATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Proven clinically effective in the treatment of most athlete's foot (tinea pedis) and ringworm (tinea corporis). Helps prevent most athlete's foot with daily use. For effective relief of itching, burning and cracking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71205-726-15</NDCCode>
<PackageDescription>1 POUCH in 1 BAG (71205-726-15) > 5 VIAL in 1 POUCH > 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>71205-0726-15</NDC11Code>
<ProductNDC>71205-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20211115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207875</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.5; 2.5</StrengthNumber>
<StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ipratropium bromide and albuterol sulfate inhalation solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.</IndicationAndUsage>
<Description>The active components in ipratropium bromide and albuterol sulfate inhalation solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate, is a salt of racemic albuterol and a relatively selective β2-adrenergic bronchodilator chemically described as α1 -[(tert-butylamino)methyl]-4-hydroxy-m‑-xylene-α, α'-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the molecular formula is (C13H21NO3)2H2SO4. It is a white or practically white powder, soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Figure 3 1-1. Chemical structure of albuterol sulfate. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-‑azoniabicyclo [3.2.1]-octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8methyl-8-(1‑methylethyl)-, bromide, monohydrate (endo, syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the molecular formula is C20H30BrNO3H2O. It is a white to off-white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Figure 3. 1-2. Chemical structure of ipratropium bromide. Each 3 mL vial of ipratropium bromide and albuterol sulfate inhalation solution contains 3 mg (0.1%) of albuterol sulfate USP (equivalent to 2.5 mg (0.083%) of albuterol base) and 0.5 mg (0.017%) of ipratropium bromide USP in an isotonic, sterile, aqueous solution containing sodium chloride, hydrochloric acid to adjust to pH 4, edetate disodium, USP (a chelating agent) and water for injection. Ipratropium bromide and albuterol sulfate inhalation solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For ipratropium bromide and albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium bromide and albuterol sulfate inhalation solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION).</Description>
</NDC>
<NDC>
<NDCCode>72450-711-02</NDCCode>
<PackageDescription>726 kg in 1 SUPERSACK (72450-711-02) </PackageDescription>
<NDC11Code>72450-0711-02</NDC11Code>
<ProductNDC>72450-711</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20180413</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Elementis SRL, Inc.</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-03-16</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>13-APR-18</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>72450-723-01</NDCCode>
<PackageDescription>726 kg in 1 SUPERSACK (72450-723-01) </PackageDescription>
<NDC11Code>72450-0723-01</NDC11Code>
<ProductNDC>72450-723</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20180413</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Elementis SRL, Inc.</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-03-25</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>13-APR-18</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>72450-726-01</NDCCode>
<PackageDescription>250 kg in 1 DRUM (72450-726-01) </PackageDescription>
<NDC11Code>72450-0726-01</NDC11Code>
<ProductNDC>72450-726</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<StartMarketingDate>20180413</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Elementis SRL, Inc.</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>.34</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-10-12</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>13-APR-18</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>72450-726-02</NDCCode>
<PackageDescription>1000 kg in 1 CONTAINER (72450-726-02) </PackageDescription>
<NDC11Code>72450-0726-02</NDC11Code>
<ProductNDC>72450-726</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<StartMarketingDate>20180413</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Elementis SRL, Inc.</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>.34</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-10-12</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>13-APR-18</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>72450-726-03</NDCCode>
<PackageDescription>1125 kg in 1 CONTAINER (72450-726-03) </PackageDescription>
<NDC11Code>72450-0726-03</NDC11Code>
<ProductNDC>72450-726</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<StartMarketingDate>20180413</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Elementis SRL, Inc.</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>.34</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-10-12</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>13-APR-18</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>87069-726-62</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (87069-726-62) / 3 BAG in 1 POUCH / 63 mL in 1 BAG</PackageDescription>
<NDC11Code>87069-0726-62</NDC11Code>
<ProductNDC>87069-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leukotrap Wb System - Cp2d</ProprietaryName>
<NonProprietaryName>Cp2d/as-3 Anticoagulant And Additive System</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260602</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN820915</ApplicationNumber>
<LabelerName>GVS TM INC</LabelerName>
<SubstanceName>DEXTROSE, UNSPECIFIED FORM</SubstanceName>
<StrengthNumber>3.21</StrengthNumber>
<StrengthUnit>g/63mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>CP2D/AS-3 Blood Bag Unit with In-Line WBF Filter (WBF2) and Sampling System.</Description>
</NDC>
<NDC>
<NDCCode>64980-104-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (64980-104-01) </PackageDescription>
<NDC11Code>64980-0104-01</NDC11Code>
<ProductNDC>64980-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dibasic Sodium Phosphate, Monobasic Potassium Phosphate And Monobasic Sodium Phosphate</ProprietaryName>
<NonProprietaryName>Dibasic Sodium Phosphate, Monobasic Potassium Phosphate And Monobasic Sodium Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120628</StartMarketingDate>
<EndMarketingDate>20281231</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, DIBASIC, ANHYDROUS; POTASSIUM PHOSPHATE, MONOBASIC; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE</SubstanceName>
<StrengthNumber>852; 155; 130</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120628</StartMarketingDatePackage>
<EndMarketingDatePackage>20281231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PHOSPHA 250TM NEUTRAL increases urinary phosphate and pyrophosphate. As a phosphorus supplement, each tablet supplies 25% of the U.S. Recommended Daily Allowance (U.S. RDA) of phosphorus for adults and children over 4 years of age.</IndicationAndUsage>
<Description>Each tablet contains 852 mg dibasic sodium phosphate anhydrous, 155 mg monobasic potassium phosphate, and 130 mg monobasic sodium phosphate monohydrate. Each tablet yields approximately 250 mg of phosphorus, 298 mg of sodium (13.0 mEq) and 45 mg of potassium (1 .1 mEq).</Description>
</NDC>
<NDC>
<NDCCode>64980-325-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (64980-325-15) > 15 g in 1 TUBE</PackageDescription>
<NDC11Code>64980-0325-15</NDC11Code>
<ProductNDC>64980-325</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nystatin And Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Nystatin And Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206785</ApplicationNumber>
<LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>NYSTATIN; TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>100000; 1</StrengthNumber>
<StrengthUnit>[USP'U]/g; mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nystatin and Triamcinolone Acetonide Ointment is indicated for the treatment of cutaneous candidiasis; it has been demonstrated that the nystatin-steroid combination provides greater benefit than the nystatin component alone during the first few days of treatment.</IndicationAndUsage>
<Description>Nystatin and Triamcinolone Acetonide Ointment for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder with a cereallike odor, very slightly soluble in water, and slightly to sparingly soluble in alcohol. Structural formula. C47H75NO17 MW = 926.13. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The white to cream crystalline powder has a slight odor, is practically insoluble in water, and very soluble in alcohol. Structural formula. C24H31FO6 MW = 434.50. Each gram of Nystatin and Triamcinolone Acetonide Ointment provides 100,000 USP Nystatin units and 1 mg Triamcinolone Acetonide in an ointment base of mineral oil and polyethylene.</Description>
</NDC>
<NDC>
<NDCCode>64980-325-30</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (64980-325-30) > 30 g in 1 TUBE</PackageDescription>
<NDC11Code>64980-0325-30</NDC11Code>
<ProductNDC>64980-325</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nystatin And Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Nystatin And Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206785</ApplicationNumber>
<LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>NYSTATIN; TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>100000; 1</StrengthNumber>
<StrengthUnit>[USP'U]/g; mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nystatin and Triamcinolone Acetonide Ointment is indicated for the treatment of cutaneous candidiasis; it has been demonstrated that the nystatin-steroid combination provides greater benefit than the nystatin component alone during the first few days of treatment.</IndicationAndUsage>
<Description>Nystatin and Triamcinolone Acetonide Ointment for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder with a cereallike odor, very slightly soluble in water, and slightly to sparingly soluble in alcohol. Structural formula. C47H75NO17 MW = 926.13. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The white to cream crystalline powder has a slight odor, is practically insoluble in water, and very soluble in alcohol. Structural formula. C24H31FO6 MW = 434.50. Each gram of Nystatin and Triamcinolone Acetonide Ointment provides 100,000 USP Nystatin units and 1 mg Triamcinolone Acetonide in an ointment base of mineral oil and polyethylene.</Description>
</NDC>
<NDC>
<NDCCode>64980-325-60</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (64980-325-60) > 60 g in 1 TUBE</PackageDescription>
<NDC11Code>64980-0325-60</NDC11Code>
<ProductNDC>64980-325</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nystatin And Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Nystatin And Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206785</ApplicationNumber>
<LabelerName>Rising Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>NYSTATIN; TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>100000; 1</StrengthNumber>
<StrengthUnit>[USP'U]/g; mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nystatin and Triamcinolone Acetonide Ointment is indicated for the treatment of cutaneous candidiasis; it has been demonstrated that the nystatin-steroid combination provides greater benefit than the nystatin component alone during the first few days of treatment.</IndicationAndUsage>
<Description>Nystatin and Triamcinolone Acetonide Ointment for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder with a cereallike odor, very slightly soluble in water, and slightly to sparingly soluble in alcohol. Structural formula. C47H75NO17 MW = 926.13. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The white to cream crystalline powder has a slight odor, is practically insoluble in water, and very soluble in alcohol. Structural formula. C24H31FO6 MW = 434.50. Each gram of Nystatin and Triamcinolone Acetonide Ointment provides 100,000 USP Nystatin units and 1 mg Triamcinolone Acetonide in an ointment base of mineral oil and polyethylene.</Description>
</NDC>
<NDC>
<NDCCode>64980-328-01</NDCCode>
<PackageDescription>23.3 g in 1 JAR (64980-328-01) </PackageDescription>
<NDC11Code>64980-0328-01</NDC11Code>
<ProductNDC>64980-328</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erythromycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Erythromycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20161018</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065385</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>ERYTHROMYCIN; BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>30; 50</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Erythromycin and Benzoyl Peroxide Topical Gel USP is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Erythromycin and Benzoyl Peroxide Topical Gel USP contains erythromycin [(3R*, 4S*, 5S*, 6R*, 7R*, 9R*, 11R*, 12R*, 13S*, 14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-0-methyl-α-L-ribo-hexopyranosyl)-oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione]. Erythromycin is a macrolide antibiotic produced from a strain of Saccharopolyspora erythraea (formerly Streptomyces erythreus). It is a base and readily forms salts with acids. Chemically, erythromycin is (C37H67NO13). It has the following structural formula. Erythromycin has the molecular weight of 733.94. It is a white crystalline powder and has a solubility of approximately 1 mg/mL in water and is soluble in alcohol at 25˚C. Erythromycin and Benzoyl Peroxide Topical Gel USP also contains benzoyl peroxide for topical use. Benzoyl peroxide is an antibacterial and keratolytic agent. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has the molecular weight of 242.23. It is a white granular powder and is sparingly soluble in water and alcohol and soluble in acetone, chloroform and ether. Each gram of Erythromycin and Benzoyl Peroxide Topical Gel USP contains, as dispensed, 30 mg (3%) of erythromycin and 50 mg (5%) of benzoyl peroxide in a base of purified water USP, carbomer 940 NF, ethyl alcohol 20%, sodium hydroxide NF, docusate sodium and fragrance.</Description>
</NDC>
<NDC>
<NDCCode>64980-328-02</NDCCode>
<PackageDescription>46.6 g in 1 JAR (64980-328-02) </PackageDescription>
<NDC11Code>64980-0328-02</NDC11Code>
<ProductNDC>64980-328</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erythromycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Erythromycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20161018</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065385</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>ERYTHROMYCIN; BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>30; 50</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Erythromycin and Benzoyl Peroxide Topical Gel USP is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Erythromycin and Benzoyl Peroxide Topical Gel USP contains erythromycin [(3R*, 4S*, 5S*, 6R*, 7R*, 9R*, 11R*, 12R*, 13S*, 14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-0-methyl-α-L-ribo-hexopyranosyl)-oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione]. Erythromycin is a macrolide antibiotic produced from a strain of Saccharopolyspora erythraea (formerly Streptomyces erythreus). It is a base and readily forms salts with acids. Chemically, erythromycin is (C37H67NO13). It has the following structural formula. Erythromycin has the molecular weight of 733.94. It is a white crystalline powder and has a solubility of approximately 1 mg/mL in water and is soluble in alcohol at 25˚C. Erythromycin and Benzoyl Peroxide Topical Gel USP also contains benzoyl peroxide for topical use. Benzoyl peroxide is an antibacterial and keratolytic agent. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has the molecular weight of 242.23. It is a white granular powder and is sparingly soluble in water and alcohol and soluble in acetone, chloroform and ether. Each gram of Erythromycin and Benzoyl Peroxide Topical Gel USP contains, as dispensed, 30 mg (3%) of erythromycin and 50 mg (5%) of benzoyl peroxide in a base of purified water USP, carbomer 940 NF, ethyl alcohol 20%, sodium hydroxide NF, docusate sodium and fragrance.</Description>
</NDC>
<NDC>
<NDCCode>64980-340-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (64980-340-01) </PackageDescription>
<NDC11Code>64980-0340-01</NDC11Code>
<ProductNDC>64980-340</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090124</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone.Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64980-340-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (64980-340-03) </PackageDescription>
<NDC11Code>64980-0340-03</NDC11Code>
<ProductNDC>64980-340</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090124</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone.Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64980-341-12</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (64980-341-12) / 4 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64980-0341-12</NDC11Code>
<ProductNDC>64980-341</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090124</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>35</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone.Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64980-341-14</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (64980-341-14) / 4 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64980-0341-14</NDC11Code>
<ProductNDC>64980-341</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090124</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>35</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone.Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64980-342-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (64980-342-01) </PackageDescription>
<NDC11Code>64980-0342-01</NDC11Code>
<ProductNDC>64980-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090124</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone.Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
</NDCList>