{
"NDC": [
{
"NDCCode": "65044-1170-5",
"PackageDescription": "5 mL in 1 VIAL (65044-1170-5) ",
"NDC11Code": "65044-1170-05",
"ProductNDC": "65044-1170",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Pollens - Trees, Birch Mix",
"NonProprietaryName": "Birch Mix",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "BETULA PAPYRIFERA POLLEN; BETULA PENDULA POLLEN; BETULA NIGRA POLLEN",
"StrengthNumber": "500; 500; 500",
"StrengthUnit": "[PNU]/mL; [PNU]/mL; [PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "Certain diagnostics carry labeling which states Allergenic Extract for Diagnostic Use Only. Data to support the therapeutic use of products labeled with this statement have not been established.15. In addition to a carefully taken history, the use of intradermal testing extracts is an accepted method in the diagnosis of allergenic conditions.1, 2, 3 When scratch, prick or puncture reactions are small, or if the patient gives a history of allergic symptoms to a substance but scratch, prick or puncture tests are inconclusive, intradermal tests may be indicated. However, ANTIGENS PRODUCING LARGE 3 TO 4+ SCRATCH, PRICK OR PUNCTURE TESTS SHOULD NOT BE TESTED INTRADERMALLY. Extracts of all allergens do not produce equivalent results in intradermal testing. The intensity of the skin reaction produced will be determined by two factors: the degree of sensitivity of the patient and the nature of the antigenic extract applied. In general, pollen extracts produce whealing reactions, whereas other inhalants produce erythematous reactions with wheals less often. Skin tests to foods seldom produce whealing reactions except for infrequent instances of severe sensitivity to fish, nuts or spices, and rarely other foods.",
"Description": "Extracts for intradermal testing are supplied in sterile multi-dose vials containing, in addition to the extract allergens and antigens, 0.5% sodium chloride, 0.275% sodium bicarbonate, up to 2% glycerin, 2.5% glycerin for AP products, and, as preservative, 0.4% phenol. The strength of these extracts may be expressed in terms of:. 1. Weight to Volume (w/v) 2. Protein Nitrogen Units/mL (PNU/mL)3. Allergy Units/mL (AU/mL)4. Bioequivalent Allergy Units/mL (BAU/mL)5. Concentrate: 1 Weight to volume (w/v). For regular extracts this describes the extraction ratio, i.e., the amount of crude allergen added to the extracting fluid. A 1:10 extract, therefore, indicates that the solution contains the extracted material from one gram of raw material added to each 10 mL of extracting fluid. The amount and composition of extracted material will vary with the kind of antigen, the extracting fluid, duration of extraction, pH, temperature, and other variables. In contrast to this, AP (acetone precipitated) extracts, if present, are prepared by reconstituting dry allergenically active concentrates produced by a precipitation process from extracts of raw materials. For those AP extracts labeled on a weight per volume (w/v) basis, the strength designation indicates the dry weight of finished (acetone) precipitate per volume of reconstituting fluid. For example, 1:50 (w/v) means that each gram of dry precipitate obtained from the original extract is reconstituted in 50 mL of solution., 2 Protein Nitrogen Units per mL (PNU/mL). One protein nitrogen unit represents 0.00001 mg phosphotungstic acid-precipitable protein nitrogen dissolved in one mL of antigen extract. The PNU content of extracts of the same antigen may vary according to the method of measuring the PNU. Thus, PNU contents of extracts from different manufacturers are not comparable unless the PNU method is known to be the same and reproducible from lot to lot. Also, the amount of protein nitrogen extracted from an antigen is influenced by the same variables as the weight to volume extract. Allergenic materials make up a variable proportion of the total protein of an extract., 3 Allergy Units per mL (AU/mL). The potency of standardized AP and regular extracts labeled in Allergy Units (AU)/mL is determined by in vitro comparison to the reference standard established by the Center for Biologics Evaluation and Research (CBER) of the Food and Drug Administration., 4 Bioequivalent Allergy Units per mL(BAU/mL). When originally licensed, the Reference Preparations for standardized extracts were arbitrarily assigned 100,000 Allergy Units (AU)/mL. Subsequently, quantitative skin testing by the ID50EAL method14 was used to determine that some Reference Preparations should be assigned 10,000 AU/mL, and others 100,000 AU/mL. To avoid possible confusion about this change in the method of allergy unit assignment, the nomenclature changed for standardized extracts whose allergy units are assigned based on quantitative skin testing, and are labeled in Bioequivalent Allergy Units (BAU)/mL. References labeled 10,000 BAU/mL can be diluted one to a half million fold, and references labeled 100,000 BAU/mL can be diluted one to 5 million fold and produce a sum of erythema diameter of 50 mm when Intradermal testing highly reactive subjects., 5 Concentrate. Concentrate label terminology applies to allergenic extract mixtures, where the individual allergens being combined vary in strength or the designation of strength."
},
{
"NDCCode": "17856-1170-1",
"PackageDescription": "120 SYRINGE in 1 BOX, UNIT-DOSE (17856-1170-1) > .5 mL in 1 SYRINGE",
"NDC11Code": "17856-1170-01",
"ProductNDC": "17856-1170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20180709",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205509",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210120",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine Sulfate Oral Solution is indicated for the management of acute and chronic pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Morphine Sulfate Oral Solution 100 mg per 5 mL (20 mg/mL) is indicated for the relief of acute and chronic pain in opioid-tolerant patients. Limitations of Use. Because of the risks of addiction, abuse and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Morphine Sulfate Oral Solution for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Morphine Sulfate Oral Solution is an opioid agonist, available in 10 mg per 5 mL (2 mg/mL), 20 mg per 5 mL (4 mg/mL), and 100 mg per 5 mL (20 mg/mL) strengths for oral administration. The chemical name is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate. The molecular weight is 758. Its molecular formula is C17H21NO7S, and it has the following chemical structure. Morphine sulfate USP is a white to off-white crystalline powder or a fine white to light yellow powder. It is soluble in water and slightly soluble in alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). For the 10 mg per 5 mL (2 mg/mL) strength: Each 5 mL of oral solution contains 10 mg of morphine sulfate USP and the following inactive ingredients: citric acid anhydrous, edetate disodium, FD&C Green No. 3, glycerin, purified water, sodium benzoate, and sorbitol solution. For the 20 mg per 5 mL (4 mg/mL) strength: Each 5 mL of oral solution contains 20 mg of morphine sulfate USP and the following inactive ingredients: citric acid anhydrous, edetate disodium, FD&C Green No. 3, glycerin, methylparaben, propylparaben, purified water, sodium benzoate, and sorbitol solution. For the 100 mg per 5 mL (20 mg/mL) strength: Each 5 mL of oral solution contains 100 mg of morphine sulfate USP and the following inactive ingredients: citric acid anhydrous, edetate disodium, glycerin, purified water, sodium benzoate, and sorbitol solution."
},
{
"NDCCode": "36987-1170-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-1170-1)",
"NDC11Code": "36987-1170-01",
"ProductNDC": "36987-1170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Veal",
"NonProprietaryName": "Veal",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "VEAL",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Meat Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "53069-1170-5",
"PackageDescription": "5 kg in 1 DRUM (53069-1170-5) ",
"NDC11Code": "53069-1170-05",
"ProductNDC": "53069-1170",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Eltrombopag Olamine",
"DosageFormName": "POWDER",
"StartMarketingDate": "20260417",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Quimica Sintetica S.A.",
"SubstanceName": "ELTROMBOPAG OLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2026-04-28",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "17-APR-26"
},
{
"NDCCode": "70518-1170-0",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (70518-1170-0) / 5 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "70518-1170-00",
"ProductNDC": "70518-1170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin Hydrochloride",
"NonProprietaryName": "Ciprofloxacin Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20180515",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019992",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "3",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]",
"Status": "Active",
"LastUpdate": "2026-07-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180515",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE: Ciprofloxacin ophthalmic solution 0.3% is indicated for the treatment of infections caused by susceptible strains of the designated microorganisms in the conditions listed below:. Corneal Ulcers:. Pseudomonas aeruginosa. Serratia marcescens*. Staphylococcus aureus. Staphylococcus epidermidis. Streptococcus pneumoniae. Streptococcus (Viridans Group)*. Conjunctivitis:. Haemophilus influenzae. Staphylococcus aureus. Staphylococcus epidermidis. Streptococcus pneumoniae. *Efficacy for this organism was studied in fewer than 10 infections.",
"Description": "DESCRIPTION: Ciprofloxacin ophthalmic solution 0.3% is a synthetic, sterile, multiple dose, antimicrobial for topical ophthalmic use. Ciprofloxacin is a fluoroquinolone antibacterial active against a broad spectrum of gram-positive and gram-negative ocular pathogens. It is available as the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline-carboxylic acid. It is a faint to light yellow crystalline powder with a molecular weight of 385.8. Its empirical formula is C 17H 18FN 3O 3∙HCl∙H 2O and its chemical structure is as follows:. Ciprofloxacin differs from other quinolones in that it has a fluorine atom at the 6-position, a piperazine moiety at the 7-position, and a cyclopropyl ring at the 1-position. Each mL of ciprofloxacin ophthalmic solution 0.3% contains: Active: ciprofloxacin HCl 3.5 mg equivalent to 3 mg base. Preservative: benzalkonium chloride 0.006%. Inactives: sodium acetate, acetic acid, mannitol 4.6%, edetate disodium 0.05%, hydrochloric acid and/or sodium hydroxide (to adjust pH) and purified water. The pH is approximately 4.5 and the osmolality is approximately 300 mOsm."
},
{
"NDCCode": "70795-1170-5",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (70795-1170-5) ",
"NDC11Code": "70795-1170-05",
"ProductNDC": "70795-1170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171018",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090564",
"LabelerName": "GRAXCELL PHARMACEUTICAL, LLC.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC],Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20171018",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1170-5",
"PackageDescription": "42 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (71335-1170-5) ",
"NDC11Code": "71335-1170-05",
"ProductNDC": "71335-1170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Esomeprazole Magnesium",
"NonProprietaryName": "Esomeprazole Magnesium",
"DosageFormName": "CAPSULE, DELAYED RELEASE PELLETS",
"RouteName": "ORAL",
"StartMarketingDate": "20170901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205563",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ESOMEPRAZOLE MAGNESIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240517",
"SamplePackage": "N",
"IndicationAndUsage": "Esomeprazole Magnesium Delayed-release Capsules is a proton pump inhibitor (PPI). Esomeprazole Magnesium Delayed-release Capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).",
"Description": "The active ingredient in Esomeprazole Magnesium Delayed-release Capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium dihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2Mg x 2 H2O with molecular weight of 749.2 as a dihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 2 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole Magnesium Delayed-release Capsules are supplied in delayed-release capsules. Each delayed-release capsule contains 20 mg, or 40 mg of esomeprazole (present as 21.7 mg, or 43.4 mg esomeprazole magnesium dihydrate) in the form of enteric-coated pellets with the following inactive ingredients: diglycerin, hypromellose, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, monoglycerides, polysorbate 80, sugar spheres, talc, and triethyl citrate. The capsule shells have the following inactive ingredients: gelatin, FD&C Blue #1, sodium lauryl sulfate, and titanium dioxide. In addition, the 20 mg capsule shell contains FD & C Red #40 and the 40 mg capsule shell contains FD&C Red #3. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol and shellac. The 20 mg ink also contains titanium dioxide. The 40 mg ink may also contain n-butyl alcohol. Esomeprazole Magnesium Delayed-release Capsules meet USP Dissolution Test 4."
},
{
"NDCCode": "76519-1170-5",
"PackageDescription": "42 TABLET in 1 BOTTLE (76519-1170-5) ",
"NDC11Code": "76519-1170-05",
"ProductNDC": "76519-1170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl",
"ProprietaryNameSuffix": "Sl",
"NonProprietaryName": "Buprenorphine Hcl",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20180316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078633",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Partial Opioid Agonists [MoA],Partial Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180316",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine Sublingual Tablets are indicated for the treatment of opioid dependence and are preferred for induction. Buprenorphine Sublingual Tablets should be used as part of a complete treatment plan to include counseling and psychosocial support.",
"Description": "Buprenorphine Sublingual Tablets are supplied as white, sublingual tablets available in two dosage strengths, 2 mg buprenorphine free base and 8 mg buprenorphine free base. Each tablet also contains citric acid anhydrous, corn starch, crospovidone, lactose monohydrate, magnesium stearate, mannitol, povidone, purified water and sodium citrate. Chemically, buprenorphine hydrochloride USP is (6R, 7R, 14S)-17-Cyclopropylmethyl-7,8-dihydro-7-[(1S)-1-hydroxy-1,2,2-trimethylpropyl]-6-O-methyl-6,14-ethano-17-normorphine hydrochloride. It has the following chemical structure. Buprenorphine hydrochloride USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.12. It is a white or almost white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane."
},
{
"NDCCode": "0527-1170-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0527-1170-01) ",
"NDC11Code": "00527-1170-01",
"ProductNDC": "0527-1170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diphenoxylate Hydrochloride And Atropine Sulfate",
"NonProprietaryName": "Diphenoxylate Hydrochloride And Atropine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19780221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085372",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ATROPINE SULFATE; DIPHENOXYLATE HYDROCHLORIDE",
"StrengthNumber": ".025; 2.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antidiarrheal [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2024-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19780221",
"SamplePackage": "N",
"IndicationAndUsage": "Diphenoxylate HCl and atropine sulfate tablets are indicated as adjunctive therapy in the management of diarrhea in patients 13 years of age and older.",
"Description": "Each Diphenoxylate Hydrochloride and Atropine Sulfate Tablet, USP contains. 2.5 mg of diphenoxylate hydrochloride USP (equivalent to 2.3 mg of diphenoxylate) and 0.025 mg of atropine sulfate USP (equivalent to 0.01 mg of atropine). Diphenoxylate hydrochloride, an antidiarrheal, is ethyl 1-(3-cyano-3,3-diphenylpropyl)-4-phenylisonipecotate monohydrochloride and has the following structural formula. Atropine sulfate, an anticholinergic, is endo-(±)-α-(hydroxymethyl) benzeneacetic acid 8-methyl-8-azabicyclo[3.2.1] oct-3-yl ester sulfate (2:1) (salt) monohydrate and has the following structural formula. A subtherapeutic amount of atropine sulfate is present to discourage deliberate overdosage. Inactive ingredients of diphenoxylate HCl and atropine sulfate tablets include lactose monohydrate, acacia, calcium stearate, methylcellulose, and cornstarch."
},
{
"NDCCode": "0527-1170-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (0527-1170-05) ",
"NDC11Code": "00527-1170-05",
"ProductNDC": "0527-1170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diphenoxylate Hydrochloride And Atropine Sulfate",
"NonProprietaryName": "Diphenoxylate Hydrochloride And Atropine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19780221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085372",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ATROPINE SULFATE; DIPHENOXYLATE HYDROCHLORIDE",
"StrengthNumber": ".025; 2.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antidiarrheal [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2024-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19780221",
"SamplePackage": "N",
"IndicationAndUsage": "Diphenoxylate HCl and atropine sulfate tablets are indicated as adjunctive therapy in the management of diarrhea in patients 13 years of age and older.",
"Description": "Each Diphenoxylate Hydrochloride and Atropine Sulfate Tablet, USP contains. 2.5 mg of diphenoxylate hydrochloride USP (equivalent to 2.3 mg of diphenoxylate) and 0.025 mg of atropine sulfate USP (equivalent to 0.01 mg of atropine). Diphenoxylate hydrochloride, an antidiarrheal, is ethyl 1-(3-cyano-3,3-diphenylpropyl)-4-phenylisonipecotate monohydrochloride and has the following structural formula. Atropine sulfate, an anticholinergic, is endo-(±)-α-(hydroxymethyl) benzeneacetic acid 8-methyl-8-azabicyclo[3.2.1] oct-3-yl ester sulfate (2:1) (salt) monohydrate and has the following structural formula. A subtherapeutic amount of atropine sulfate is present to discourage deliberate overdosage. Inactive ingredients of diphenoxylate HCl and atropine sulfate tablets include lactose monohydrate, acacia, calcium stearate, methylcellulose, and cornstarch."
},
{
"NDCCode": "0527-1170-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (0527-1170-10) ",
"NDC11Code": "00527-1170-10",
"ProductNDC": "0527-1170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diphenoxylate Hydrochloride And Atropine Sulfate",
"NonProprietaryName": "Diphenoxylate Hydrochloride And Atropine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19780221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085372",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ATROPINE SULFATE; DIPHENOXYLATE HYDROCHLORIDE",
"StrengthNumber": ".025; 2.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antidiarrheal [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2024-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19780221",
"SamplePackage": "N",
"IndicationAndUsage": "Diphenoxylate HCl and atropine sulfate tablets are indicated as adjunctive therapy in the management of diarrhea in patients 13 years of age and older.",
"Description": "Each Diphenoxylate Hydrochloride and Atropine Sulfate Tablet, USP contains. 2.5 mg of diphenoxylate hydrochloride USP (equivalent to 2.3 mg of diphenoxylate) and 0.025 mg of atropine sulfate USP (equivalent to 0.01 mg of atropine). Diphenoxylate hydrochloride, an antidiarrheal, is ethyl 1-(3-cyano-3,3-diphenylpropyl)-4-phenylisonipecotate monohydrochloride and has the following structural formula. Atropine sulfate, an anticholinergic, is endo-(±)-α-(hydroxymethyl) benzeneacetic acid 8-methyl-8-azabicyclo[3.2.1] oct-3-yl ester sulfate (2:1) (salt) monohydrate and has the following structural formula. A subtherapeutic amount of atropine sulfate is present to discourage deliberate overdosage. Inactive ingredients of diphenoxylate HCl and atropine sulfate tablets include lactose monohydrate, acacia, calcium stearate, methylcellulose, and cornstarch."
},
{
"NDCCode": "55154-6128-2",
"PackageDescription": "1170 TABLET, FILM COATED in 1 BOTTLE (55154-6128-2) ",
"NDC11Code": "55154-6128-02",
"ProductNDC": "55154-6128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benicar Hct",
"NonProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20030605",
"EndMarketingDate": "20180831",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021532",
"LabelerName": "Cardinal Health",
"SubstanceName": "OLMESARTAN MEDOXOMIL; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "40; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20030605",
"EndMarketingDatePackage": "20180831",
"SamplePackage": "N"
},
{
"NDCCode": "58988-1170-1",
"PackageDescription": "1 TUBE in 1 CARTON (58988-1170-1) / 28.35 g in 1 TUBE",
"NDC11Code": "58988-1170-01",
"ProductNDC": "58988-1170",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cuadriderma",
"NonProprietaryName": "Bacitracin Zinc, Polymyxin B Sulfate, Neomycin Sulfate, And Pramoxine Hydrochloride",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130531",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M004",
"LabelerName": "ProMex LLC",
"SubstanceName": "BACITRACIN ZINC; POLYMYXIN B SULFATE; NEOMYCIN SULFATE; PRAMOXINE HYDROCHLORIDE",
"StrengthNumber": "500; 10000; 3.5; 10",
"StrengthUnit": "[iU]/g; [iU]/g; mg/g; mg/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Active",
"LastUpdate": "2024-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130531",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent infection in and temporarily relieves pain due to: 1 *minor cuts, 2 *scrapes, 3 *burns."
},
{
"NDCCode": "65044-0020-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0020-1) ",
"NDC11Code": "65044-0020-01",
"ProductNDC": "65044-0020",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Tetrakis(2-methoxyisobutylisocyanide)copper(i) Tetrafluoroborate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"StartMarketingDate": "20161019",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "TETRAKIS(2-METHOXYISOBUTYLISOCYANIDE)COPPER(I) TETRAFLUOROBORATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Status": "Unfinished",
"LastUpdate": "2026-06-03",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19-OCT-16"
},
{
"NDCCode": "65044-0040-1",
"PackageDescription": "1.5 mL in 1 VIAL, GLASS (65044-0040-1) ",
"NDC11Code": "65044-0040-01",
"ProductNDC": "65044-0040",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Perflutren",
"DosageFormName": "INJECTION, SUSPENSION",
"StartMarketingDate": "20130205",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "PERFLUTREN",
"StrengthNumber": "6.52",
"StrengthUnit": "mg/mL",
"Status": "Unfinished",
"LastUpdate": "2023-12-05",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "05-FEB-13"
},
{
"NDCCode": "65044-0537-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0537-1) ",
"NDC11Code": "65044-0537-01",
"ProductNDC": "65044-0537",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bermuda Grass",
"NonProprietaryName": "Standardized Grass Pollen, Bermuda Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103872",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "CYNODON DACTYLON POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0538-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0538-5) ",
"NDC11Code": "65044-0538-05",
"ProductNDC": "65044-0538",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bermuda Grass",
"NonProprietaryName": "Standardized Grass Pollen, Bermuda Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103872",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "CYNODON DACTYLON POLLEN",
"StrengthNumber": "100",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0545-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0545-1) ",
"NDC11Code": "65044-0545-01",
"ProductNDC": "65044-0545",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"NonProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103873",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0546-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0546-1) ",
"NDC11Code": "65044-0546-01",
"ProductNDC": "65044-0546",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"NonProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103873",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0547-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0547-5) ",
"NDC11Code": "65044-0547-05",
"ProductNDC": "65044-0547",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"NonProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103873",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "100",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0548-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0548-5) ",
"NDC11Code": "65044-0548-05",
"ProductNDC": "65044-0548",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"NonProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103873",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "1000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0611-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0611-1) ",
"NDC11Code": "65044-0611-01",
"ProductNDC": "65044-0611",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"NonProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103874",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "LOLIUM PRATENSE POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0612-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0612-1) ",
"NDC11Code": "65044-0612-01",
"ProductNDC": "65044-0612",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"NonProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103874",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "LOLIUM PRATENSE POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0613-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0613-5) ",
"NDC11Code": "65044-0613-05",
"ProductNDC": "65044-0613",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"NonProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103874",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "FESTUCA PRATENSIS POLLEN",
"StrengthNumber": "100",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0614-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0614-5) ",
"NDC11Code": "65044-0614-05",
"ProductNDC": "65044-0614",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"NonProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103874",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "FESTUCA PRATENSIS POLLEN",
"StrengthNumber": "1000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0718-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0718-1) ",
"NDC11Code": "65044-0718-01",
"ProductNDC": "65044-0718",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"NonProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103875",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0719-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0719-1) ",
"NDC11Code": "65044-0719-01",
"ProductNDC": "65044-0719",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"NonProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103875",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0720-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0720-5) ",
"NDC11Code": "65044-0720-05",
"ProductNDC": "65044-0720",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"NonProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103875",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "100",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0721-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0721-5) ",
"NDC11Code": "65044-0721-05",
"ProductNDC": "65044-0721",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"NonProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103875",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "1000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0777-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0777-1) ",
"NDC11Code": "65044-0777-01",
"ProductNDC": "65044-0777",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Redtop",
"NonProprietaryName": "Standardized Grass Pollen, Redtop",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103876",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>65044-1170-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-1170-5) </PackageDescription>
<NDC11Code>65044-1170-05</NDC11Code>
<ProductNDC>65044-1170</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Pollens - Trees, Birch Mix</ProprietaryName>
<NonProprietaryName>Birch Mix</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>BETULA PAPYRIFERA POLLEN; BETULA PENDULA POLLEN; BETULA NIGRA POLLEN</SubstanceName>
<StrengthNumber>500; 500; 500</StrengthNumber>
<StrengthUnit>[PNU]/mL; [PNU]/mL; [PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Certain diagnostics carry labeling which states Allergenic Extract for Diagnostic Use Only. Data to support the therapeutic use of products labeled with this statement have not been established.15. In addition to a carefully taken history, the use of intradermal testing extracts is an accepted method in the diagnosis of allergenic conditions.1, 2, 3 When scratch, prick or puncture reactions are small, or if the patient gives a history of allergic symptoms to a substance but scratch, prick or puncture tests are inconclusive, intradermal tests may be indicated. However, ANTIGENS PRODUCING LARGE 3 TO 4+ SCRATCH, PRICK OR PUNCTURE TESTS SHOULD NOT BE TESTED INTRADERMALLY. Extracts of all allergens do not produce equivalent results in intradermal testing. The intensity of the skin reaction produced will be determined by two factors: the degree of sensitivity of the patient and the nature of the antigenic extract applied. In general, pollen extracts produce whealing reactions, whereas other inhalants produce erythematous reactions with wheals less often. Skin tests to foods seldom produce whealing reactions except for infrequent instances of severe sensitivity to fish, nuts or spices, and rarely other foods.</IndicationAndUsage>
<Description>Extracts for intradermal testing are supplied in sterile multi-dose vials containing, in addition to the extract allergens and antigens, 0.5% sodium chloride, 0.275% sodium bicarbonate, up to 2% glycerin, 2.5% glycerin for AP products, and, as preservative, 0.4% phenol. The strength of these extracts may be expressed in terms of:. 1. Weight to Volume (w/v) 2. Protein Nitrogen Units/mL (PNU/mL)3. Allergy Units/mL (AU/mL)4. Bioequivalent Allergy Units/mL (BAU/mL)5. Concentrate: 1 Weight to volume (w/v). For regular extracts this describes the extraction ratio, i.e., the amount of crude allergen added to the extracting fluid. A 1:10 extract, therefore, indicates that the solution contains the extracted material from one gram of raw material added to each 10 mL of extracting fluid. The amount and composition of extracted material will vary with the kind of antigen, the extracting fluid, duration of extraction, pH, temperature, and other variables. In contrast to this, AP (acetone precipitated) extracts, if present, are prepared by reconstituting dry allergenically active concentrates produced by a precipitation process from extracts of raw materials. For those AP extracts labeled on a weight per volume (w/v) basis, the strength designation indicates the dry weight of finished (acetone) precipitate per volume of reconstituting fluid. For example, 1:50 (w/v) means that each gram of dry precipitate obtained from the original extract is reconstituted in 50 mL of solution., 2 Protein Nitrogen Units per mL (PNU/mL). One protein nitrogen unit represents 0.00001 mg phosphotungstic acid-precipitable protein nitrogen dissolved in one mL of antigen extract. The PNU content of extracts of the same antigen may vary according to the method of measuring the PNU. Thus, PNU contents of extracts from different manufacturers are not comparable unless the PNU method is known to be the same and reproducible from lot to lot. Also, the amount of protein nitrogen extracted from an antigen is influenced by the same variables as the weight to volume extract. Allergenic materials make up a variable proportion of the total protein of an extract., 3 Allergy Units per mL (AU/mL). The potency of standardized AP and regular extracts labeled in Allergy Units (AU)/mL is determined by in vitro comparison to the reference standard established by the Center for Biologics Evaluation and Research (CBER) of the Food and Drug Administration., 4 Bioequivalent Allergy Units per mL(BAU/mL). When originally licensed, the Reference Preparations for standardized extracts were arbitrarily assigned 100,000 Allergy Units (AU)/mL. Subsequently, quantitative skin testing by the ID50EAL method14 was used to determine that some Reference Preparations should be assigned 10,000 AU/mL, and others 100,000 AU/mL. To avoid possible confusion about this change in the method of allergy unit assignment, the nomenclature changed for standardized extracts whose allergy units are assigned based on quantitative skin testing, and are labeled in Bioequivalent Allergy Units (BAU)/mL. References labeled 10,000 BAU/mL can be diluted one to a half million fold, and references labeled 100,000 BAU/mL can be diluted one to 5 million fold and produce a sum of erythema diameter of 50 mm when Intradermal testing highly reactive subjects., 5 Concentrate. Concentrate label terminology applies to allergenic extract mixtures, where the individual allergens being combined vary in strength or the designation of strength.</Description>
</NDC>
<NDC>
<NDCCode>17856-1170-1</NDCCode>
<PackageDescription>120 SYRINGE in 1 BOX, UNIT-DOSE (17856-1170-1) > .5 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>17856-1170-01</NDC11Code>
<ProductNDC>17856-1170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180709</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205509</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine Sulfate Oral Solution is indicated for the management of acute and chronic pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Morphine Sulfate Oral Solution 100 mg per 5 mL (20 mg/mL) is indicated for the relief of acute and chronic pain in opioid-tolerant patients. Limitations of Use. Because of the risks of addiction, abuse and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Morphine Sulfate Oral Solution for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Morphine Sulfate Oral Solution is an opioid agonist, available in 10 mg per 5 mL (2 mg/mL), 20 mg per 5 mL (4 mg/mL), and 100 mg per 5 mL (20 mg/mL) strengths for oral administration. The chemical name is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate. The molecular weight is 758. Its molecular formula is C17H21NO7S, and it has the following chemical structure. Morphine sulfate USP is a white to off-white crystalline powder or a fine white to light yellow powder. It is soluble in water and slightly soluble in alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). For the 10 mg per 5 mL (2 mg/mL) strength: Each 5 mL of oral solution contains 10 mg of morphine sulfate USP and the following inactive ingredients: citric acid anhydrous, edetate disodium, FD&C Green No. 3, glycerin, purified water, sodium benzoate, and sorbitol solution. For the 20 mg per 5 mL (4 mg/mL) strength: Each 5 mL of oral solution contains 20 mg of morphine sulfate USP and the following inactive ingredients: citric acid anhydrous, edetate disodium, FD&C Green No. 3, glycerin, methylparaben, propylparaben, purified water, sodium benzoate, and sorbitol solution. For the 100 mg per 5 mL (20 mg/mL) strength: Each 5 mL of oral solution contains 100 mg of morphine sulfate USP and the following inactive ingredients: citric acid anhydrous, edetate disodium, glycerin, purified water, sodium benzoate, and sorbitol solution.</Description>
</NDC>
<NDC>
<NDCCode>36987-1170-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-1170-1)</PackageDescription>
<NDC11Code>36987-1170-01</NDC11Code>
<ProductNDC>36987-1170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Veal</ProprietaryName>
<NonProprietaryName>Veal</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>VEAL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Meat Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>53069-1170-5</NDCCode>
<PackageDescription>5 kg in 1 DRUM (53069-1170-5) </PackageDescription>
<NDC11Code>53069-1170-05</NDC11Code>
<ProductNDC>53069-1170</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Eltrombopag Olamine</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20260417</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Quimica Sintetica S.A.</LabelerName>
<SubstanceName>ELTROMBOPAG OLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-04-28</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>17-APR-26</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>70518-1170-0</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (70518-1170-0) / 5 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>70518-1170-00</NDC11Code>
<ProductNDC>70518-1170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin Hydrochloride</ProprietaryName>
<NonProprietaryName>Ciprofloxacin Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20180515</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019992</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE: Ciprofloxacin ophthalmic solution 0.3% is indicated for the treatment of infections caused by susceptible strains of the designated microorganisms in the conditions listed below:. Corneal Ulcers:. Pseudomonas aeruginosa. Serratia marcescens*. Staphylococcus aureus. Staphylococcus epidermidis. Streptococcus pneumoniae. Streptococcus (Viridans Group)*. Conjunctivitis:. Haemophilus influenzae. Staphylococcus aureus. Staphylococcus epidermidis. Streptococcus pneumoniae. *Efficacy for this organism was studied in fewer than 10 infections.</IndicationAndUsage>
<Description>DESCRIPTION: Ciprofloxacin ophthalmic solution 0.3% is a synthetic, sterile, multiple dose, antimicrobial for topical ophthalmic use. Ciprofloxacin is a fluoroquinolone antibacterial active against a broad spectrum of gram-positive and gram-negative ocular pathogens. It is available as the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline-carboxylic acid. It is a faint to light yellow crystalline powder with a molecular weight of 385.8. Its empirical formula is C 17H 18FN 3O 3∙HCl∙H 2O and its chemical structure is as follows:. Ciprofloxacin differs from other quinolones in that it has a fluorine atom at the 6-position, a piperazine moiety at the 7-position, and a cyclopropyl ring at the 1-position. Each mL of ciprofloxacin ophthalmic solution 0.3% contains: Active: ciprofloxacin HCl 3.5 mg equivalent to 3 mg base. Preservative: benzalkonium chloride 0.006%. Inactives: sodium acetate, acetic acid, mannitol 4.6%, edetate disodium 0.05%, hydrochloric acid and/or sodium hydroxide (to adjust pH) and purified water. The pH is approximately 4.5 and the osmolality is approximately 300 mOsm.</Description>
</NDC>
<NDC>
<NDCCode>70795-1170-5</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (70795-1170-5) </PackageDescription>
<NDC11Code>70795-1170-05</NDC11Code>
<ProductNDC>70795-1170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171018</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090564</ApplicationNumber>
<LabelerName>GRAXCELL PHARMACEUTICAL, LLC.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC],Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1170-5</NDCCode>
<PackageDescription>42 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (71335-1170-5) </PackageDescription>
<NDC11Code>71335-1170-05</NDC11Code>
<ProductNDC>71335-1170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
<NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE PELLETS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205563</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Esomeprazole Magnesium Delayed-release Capsules is a proton pump inhibitor (PPI). Esomeprazole Magnesium Delayed-release Capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
<Description>The active ingredient in Esomeprazole Magnesium Delayed-release Capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium dihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2Mg x 2 H2O with molecular weight of 749.2 as a dihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 2 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole Magnesium Delayed-release Capsules are supplied in delayed-release capsules. Each delayed-release capsule contains 20 mg, or 40 mg of esomeprazole (present as 21.7 mg, or 43.4 mg esomeprazole magnesium dihydrate) in the form of enteric-coated pellets with the following inactive ingredients: diglycerin, hypromellose, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, monoglycerides, polysorbate 80, sugar spheres, talc, and triethyl citrate. The capsule shells have the following inactive ingredients: gelatin, FD&C Blue #1, sodium lauryl sulfate, and titanium dioxide. In addition, the 20 mg capsule shell contains FD & C Red #40 and the 40 mg capsule shell contains FD&C Red #3. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol and shellac. The 20 mg ink also contains titanium dioxide. The 40 mg ink may also contain n-butyl alcohol. Esomeprazole Magnesium Delayed-release Capsules meet USP Dissolution Test 4.</Description>
</NDC>
<NDC>
<NDCCode>76519-1170-5</NDCCode>
<PackageDescription>42 TABLET in 1 BOTTLE (76519-1170-5) </PackageDescription>
<NDC11Code>76519-1170-05</NDC11Code>
<ProductNDC>76519-1170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl</ProprietaryName>
<ProprietaryNameSuffix>Sl</ProprietaryNameSuffix>
<NonProprietaryName>Buprenorphine Hcl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20180316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078633</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonists [MoA],Partial Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine Sublingual Tablets are indicated for the treatment of opioid dependence and are preferred for induction. Buprenorphine Sublingual Tablets should be used as part of a complete treatment plan to include counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine Sublingual Tablets are supplied as white, sublingual tablets available in two dosage strengths, 2 mg buprenorphine free base and 8 mg buprenorphine free base. Each tablet also contains citric acid anhydrous, corn starch, crospovidone, lactose monohydrate, magnesium stearate, mannitol, povidone, purified water and sodium citrate. Chemically, buprenorphine hydrochloride USP is (6R, 7R, 14S)-17-Cyclopropylmethyl-7,8-dihydro-7-[(1S)-1-hydroxy-1,2,2-trimethylpropyl]-6-O-methyl-6,14-ethano-17-normorphine hydrochloride. It has the following chemical structure. Buprenorphine hydrochloride USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.12. It is a white or almost white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane.</Description>
</NDC>
<NDC>
<NDCCode>0527-1170-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0527-1170-01) </PackageDescription>
<NDC11Code>00527-1170-01</NDC11Code>
<ProductNDC>0527-1170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diphenoxylate Hydrochloride And Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Diphenoxylate Hydrochloride And Atropine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19780221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085372</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ATROPINE SULFATE; DIPHENOXYLATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.025; 2.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antidiarrheal [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19780221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diphenoxylate HCl and atropine sulfate tablets are indicated as adjunctive therapy in the management of diarrhea in patients 13 years of age and older.</IndicationAndUsage>
<Description>Each Diphenoxylate Hydrochloride and Atropine Sulfate Tablet, USP contains. 2.5 mg of diphenoxylate hydrochloride USP (equivalent to 2.3 mg of diphenoxylate) and 0.025 mg of atropine sulfate USP (equivalent to 0.01 mg of atropine). Diphenoxylate hydrochloride, an antidiarrheal, is ethyl 1-(3-cyano-3,3-diphenylpropyl)-4-phenylisonipecotate monohydrochloride and has the following structural formula. Atropine sulfate, an anticholinergic, is endo-(±)-α-(hydroxymethyl) benzeneacetic acid 8-methyl-8-azabicyclo[3.2.1] oct-3-yl ester sulfate (2:1) (salt) monohydrate and has the following structural formula. A subtherapeutic amount of atropine sulfate is present to discourage deliberate overdosage. Inactive ingredients of diphenoxylate HCl and atropine sulfate tablets include lactose monohydrate, acacia, calcium stearate, methylcellulose, and cornstarch.</Description>
</NDC>
<NDC>
<NDCCode>0527-1170-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (0527-1170-05) </PackageDescription>
<NDC11Code>00527-1170-05</NDC11Code>
<ProductNDC>0527-1170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diphenoxylate Hydrochloride And Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Diphenoxylate Hydrochloride And Atropine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19780221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085372</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ATROPINE SULFATE; DIPHENOXYLATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.025; 2.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antidiarrheal [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19780221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diphenoxylate HCl and atropine sulfate tablets are indicated as adjunctive therapy in the management of diarrhea in patients 13 years of age and older.</IndicationAndUsage>
<Description>Each Diphenoxylate Hydrochloride and Atropine Sulfate Tablet, USP contains. 2.5 mg of diphenoxylate hydrochloride USP (equivalent to 2.3 mg of diphenoxylate) and 0.025 mg of atropine sulfate USP (equivalent to 0.01 mg of atropine). Diphenoxylate hydrochloride, an antidiarrheal, is ethyl 1-(3-cyano-3,3-diphenylpropyl)-4-phenylisonipecotate monohydrochloride and has the following structural formula. Atropine sulfate, an anticholinergic, is endo-(±)-α-(hydroxymethyl) benzeneacetic acid 8-methyl-8-azabicyclo[3.2.1] oct-3-yl ester sulfate (2:1) (salt) monohydrate and has the following structural formula. A subtherapeutic amount of atropine sulfate is present to discourage deliberate overdosage. Inactive ingredients of diphenoxylate HCl and atropine sulfate tablets include lactose monohydrate, acacia, calcium stearate, methylcellulose, and cornstarch.</Description>
</NDC>
<NDC>
<NDCCode>0527-1170-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (0527-1170-10) </PackageDescription>
<NDC11Code>00527-1170-10</NDC11Code>
<ProductNDC>0527-1170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diphenoxylate Hydrochloride And Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Diphenoxylate Hydrochloride And Atropine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19780221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085372</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ATROPINE SULFATE; DIPHENOXYLATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.025; 2.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antidiarrheal [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19780221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diphenoxylate HCl and atropine sulfate tablets are indicated as adjunctive therapy in the management of diarrhea in patients 13 years of age and older.</IndicationAndUsage>
<Description>Each Diphenoxylate Hydrochloride and Atropine Sulfate Tablet, USP contains. 2.5 mg of diphenoxylate hydrochloride USP (equivalent to 2.3 mg of diphenoxylate) and 0.025 mg of atropine sulfate USP (equivalent to 0.01 mg of atropine). Diphenoxylate hydrochloride, an antidiarrheal, is ethyl 1-(3-cyano-3,3-diphenylpropyl)-4-phenylisonipecotate monohydrochloride and has the following structural formula. Atropine sulfate, an anticholinergic, is endo-(±)-α-(hydroxymethyl) benzeneacetic acid 8-methyl-8-azabicyclo[3.2.1] oct-3-yl ester sulfate (2:1) (salt) monohydrate and has the following structural formula. A subtherapeutic amount of atropine sulfate is present to discourage deliberate overdosage. Inactive ingredients of diphenoxylate HCl and atropine sulfate tablets include lactose monohydrate, acacia, calcium stearate, methylcellulose, and cornstarch.</Description>
</NDC>
<NDC>
<NDCCode>55154-6128-2</NDCCode>
<PackageDescription>1170 TABLET, FILM COATED in 1 BOTTLE (55154-6128-2) </PackageDescription>
<NDC11Code>55154-6128-02</NDC11Code>
<ProductNDC>55154-6128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benicar Hct</ProprietaryName>
<NonProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030605</StartMarketingDate>
<EndMarketingDate>20180831</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021532</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>OLMESARTAN MEDOXOMIL; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>40; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20030605</StartMarketingDatePackage>
<EndMarketingDatePackage>20180831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58988-1170-1</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (58988-1170-1) / 28.35 g in 1 TUBE</PackageDescription>
<NDC11Code>58988-1170-01</NDC11Code>
<ProductNDC>58988-1170</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cuadriderma</ProprietaryName>
<NonProprietaryName>Bacitracin Zinc, Polymyxin B Sulfate, Neomycin Sulfate, And Pramoxine Hydrochloride</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130531</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M004</ApplicationNumber>
<LabelerName>ProMex LLC</LabelerName>
<SubstanceName>BACITRACIN ZINC; POLYMYXIN B SULFATE; NEOMYCIN SULFATE; PRAMOXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500; 10000; 3.5; 10</StrengthNumber>
<StrengthUnit>[iU]/g; [iU]/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent infection in and temporarily relieves pain due to: 1 *minor cuts, 2 *scrapes, 3 *burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65044-0020-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0020-1) </PackageDescription>
<NDC11Code>65044-0020-01</NDC11Code>
<ProductNDC>65044-0020</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Tetrakis(2-methoxyisobutylisocyanide)copper(i) Tetrafluoroborate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<StartMarketingDate>20161019</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>TETRAKIS(2-METHOXYISOBUTYLISOCYANIDE)COPPER(I) TETRAFLUOROBORATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-06-03</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19-OCT-16</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>65044-0040-1</NDCCode>
<PackageDescription>1.5 mL in 1 VIAL, GLASS (65044-0040-1) </PackageDescription>
<NDC11Code>65044-0040-01</NDC11Code>
<ProductNDC>65044-0040</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Perflutren</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<StartMarketingDate>20130205</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>PERFLUTREN</SubstanceName>
<StrengthNumber>6.52</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-12-05</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>05-FEB-13</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>65044-0537-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0537-1) </PackageDescription>
<NDC11Code>65044-0537-01</NDC11Code>
<ProductNDC>65044-0537</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bermuda Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bermuda Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103872</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0538-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0538-5) </PackageDescription>
<NDC11Code>65044-0538-05</NDC11Code>
<ProductNDC>65044-0538</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bermuda Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bermuda Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103872</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0545-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0545-1) </PackageDescription>
<NDC11Code>65044-0545-01</NDC11Code>
<ProductNDC>65044-0545</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103873</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0546-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0546-1) </PackageDescription>
<NDC11Code>65044-0546-01</NDC11Code>
<ProductNDC>65044-0546</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103873</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0547-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0547-5) </PackageDescription>
<NDC11Code>65044-0547-05</NDC11Code>
<ProductNDC>65044-0547</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103873</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0548-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0548-5) </PackageDescription>
<NDC11Code>65044-0548-05</NDC11Code>
<ProductNDC>65044-0548</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103873</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0611-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0611-1) </PackageDescription>
<NDC11Code>65044-0611-01</NDC11Code>
<ProductNDC>65044-0611</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Fescue, Meadow</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Fescue, Meadow</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103874</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>LOLIUM PRATENSE POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0612-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0612-1) </PackageDescription>
<NDC11Code>65044-0612-01</NDC11Code>
<ProductNDC>65044-0612</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Fescue, Meadow</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Fescue, Meadow</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103874</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>LOLIUM PRATENSE POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0613-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0613-5) </PackageDescription>
<NDC11Code>65044-0613-05</NDC11Code>
<ProductNDC>65044-0613</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Fescue, Meadow</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Fescue, Meadow</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103874</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>FESTUCA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0614-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0614-5) </PackageDescription>
<NDC11Code>65044-0614-05</NDC11Code>
<ProductNDC>65044-0614</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Fescue, Meadow</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Fescue, Meadow</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103874</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>FESTUCA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0718-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0718-1) </PackageDescription>
<NDC11Code>65044-0718-01</NDC11Code>
<ProductNDC>65044-0718</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Orchard Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Orchard Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103875</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0719-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0719-1) </PackageDescription>
<NDC11Code>65044-0719-01</NDC11Code>
<ProductNDC>65044-0719</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Orchard Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Orchard Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103875</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0720-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0720-5) </PackageDescription>
<NDC11Code>65044-0720-05</NDC11Code>
<ProductNDC>65044-0720</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Orchard Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Orchard Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103875</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0721-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0721-5) </PackageDescription>
<NDC11Code>65044-0721-05</NDC11Code>
<ProductNDC>65044-0721</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Orchard Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Orchard Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103875</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0777-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0777-1) </PackageDescription>
<NDC11Code>65044-0777-01</NDC11Code>
<ProductNDC>65044-0777</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Redtop</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Redtop</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103876</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
</NDCList>