{
"NDC": [
{
"NDCCode": "65044-1746-5",
"PackageDescription": "5 mL in 1 VIAL (65044-1746-5) ",
"NDC11Code": "65044-1746-05",
"ProductNDC": "65044-1746",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Pollens - Grasses, Johnson Grass Sorghum Halepense",
"NonProprietaryName": "Johnson Grass Sorghum Halepense",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "SORGHUM HALEPENSE POLLEN",
"StrengthNumber": "500",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "Certain diagnostics carry labeling which states Allergenic Extract for Diagnostic Use Only. Data to support the therapeutic use of products labeled with this statement have not been established.15. In addition to a carefully taken history, the use of intradermal testing extracts is an accepted method in the diagnosis of allergenic conditions.1, 2, 3 When scratch, prick or puncture reactions are small, or if the patient gives a history of allergic symptoms to a substance but scratch, prick or puncture tests are inconclusive, intradermal tests may be indicated. However, ANTIGENS PRODUCING LARGE 3 TO 4+ SCRATCH, PRICK OR PUNCTURE TESTS SHOULD NOT BE TESTED INTRADERMALLY. Extracts of all allergens do not produce equivalent results in intradermal testing. The intensity of the skin reaction produced will be determined by two factors: the degree of sensitivity of the patient and the nature of the antigenic extract applied. In general, pollen extracts produce whealing reactions, whereas other inhalants produce erythematous reactions with wheals less often. Skin tests to foods seldom produce whealing reactions except for infrequent instances of severe sensitivity to fish, nuts or spices, and rarely other foods.",
"Description": "Extracts for intradermal testing are supplied in sterile multi-dose vials containing, in addition to the extract allergens and antigens, 0.5% sodium chloride, 0.275% sodium bicarbonate, up to 2% glycerin, 2.5% glycerin for AP products, and, as preservative, 0.4% phenol. The strength of these extracts may be expressed in terms of:. 1. Weight to Volume (w/v) 2. Protein Nitrogen Units/mL (PNU/mL)3. Allergy Units/mL (AU/mL)4. Bioequivalent Allergy Units/mL (BAU/mL)5. Concentrate: 1 Weight to volume (w/v). For regular extracts this describes the extraction ratio, i.e., the amount of crude allergen added to the extracting fluid. A 1:10 extract, therefore, indicates that the solution contains the extracted material from one gram of raw material added to each 10 mL of extracting fluid. The amount and composition of extracted material will vary with the kind of antigen, the extracting fluid, duration of extraction, pH, temperature, and other variables. In contrast to this, AP (acetone precipitated) extracts, if present, are prepared by reconstituting dry allergenically active concentrates produced by a precipitation process from extracts of raw materials. For those AP extracts labeled on a weight per volume (w/v) basis, the strength designation indicates the dry weight of finished (acetone) precipitate per volume of reconstituting fluid. For example, 1:50 (w/v) means that each gram of dry precipitate obtained from the original extract is reconstituted in 50 mL of solution., 2 Protein Nitrogen Units per mL (PNU/mL). One protein nitrogen unit represents 0.00001 mg phosphotungstic acid-precipitable protein nitrogen dissolved in one mL of antigen extract. The PNU content of extracts of the same antigen may vary according to the method of measuring the PNU. Thus, PNU contents of extracts from different manufacturers are not comparable unless the PNU method is known to be the same and reproducible from lot to lot. Also, the amount of protein nitrogen extracted from an antigen is influenced by the same variables as the weight to volume extract. Allergenic materials make up a variable proportion of the total protein of an extract., 3 Allergy Units per mL (AU/mL). The potency of standardized AP and regular extracts labeled in Allergy Units (AU)/mL is determined by in vitro comparison to the reference standard established by the Center for Biologics Evaluation and Research (CBER) of the Food and Drug Administration., 4 Bioequivalent Allergy Units per mL(BAU/mL). When originally licensed, the Reference Preparations for standardized extracts were arbitrarily assigned 100,000 Allergy Units (AU)/mL. Subsequently, quantitative skin testing by the ID50EAL method14 was used to determine that some Reference Preparations should be assigned 10,000 AU/mL, and others 100,000 AU/mL. To avoid possible confusion about this change in the method of allergy unit assignment, the nomenclature changed for standardized extracts whose allergy units are assigned based on quantitative skin testing, and are labeled in Bioequivalent Allergy Units (BAU)/mL. References labeled 10,000 BAU/mL can be diluted one to a half million fold, and references labeled 100,000 BAU/mL can be diluted one to 5 million fold and produce a sum of erythema diameter of 50 mm when Intradermal testing highly reactive subjects., 5 Concentrate. Concentrate label terminology applies to allergenic extract mixtures, where the individual allergens being combined vary in strength or the designation of strength."
},
{
"NDCCode": "36987-1746-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-1746-1)",
"NDC11Code": "36987-1746-01",
"ProductNDC": "36987-1746",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Thyme",
"NonProprietaryName": "Thym",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "GARDEN THYME",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dietary Proteins [CS],Food Additives [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "54569-1746-5",
"PackageDescription": "15 CAPSULE in 1 BOTTLE (54569-1746-5)",
"NDC11Code": "54569-1746-05",
"ProductNDC": "54569-1746",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065271",
"LabelerName": "A-S Medication Solutions LLC",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "70771-1746-5",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (70771-1746-5) ",
"NDC11Code": "70771-1746-05",
"ProductNDC": "70771-1746",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Darunavir",
"NonProprietaryName": "Darunavir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214085",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "DARUNAVIR",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1746-5",
"PackageDescription": "20 CAPSULE, DELAYED RELEASE in 1 BOTTLE (71335-1746-5) ",
"NDC11Code": "71335-1746-05",
"ProductNDC": "71335-1746",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20021104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075410",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210503",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1), 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2), 3 Treatment of active benign gastric ulcer in adults (1.3), 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4), 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5), 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6), 7 Pathologic hypersecretory conditions in adults (1.7).",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol."
},
{
"NDCCode": "0409-1746-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0409-1746-10) / 10 mL in 1 VIAL, SINGLE-DOSE (0409-1746-70) ",
"NDC11Code": "00409-1746-10",
"ProductNDC": "0409-1746",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Marcaine With Epinephrine",
"NonProprietaryName": "Bupivacaine Hydrochloride And Epinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20050912",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016964",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "2.5; .0091",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051209",
"SamplePackage": "N",
"IndicationAndUsage": "MARCAINE / MARCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of MARCAINE / MARCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "MARCAINE / MARCAINE WITH EPINEPHRINE contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for MARCAINE (without epinephrine) is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. The route of administration for MARCAINE WITH EPINEPHRINE is by injection, for infiltration, perineural, caudal, or epidural use. Multiple-dose vials contain methylparaben [see Warnings and Precautions (5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. MARCAINE with 1:200,000 epinephrine, contains bupivacaine hydrochloride and epinephrine bitartrate (an alpha and beta-adrenergic agonist) as active pharmaceutical ingredients. This product is for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Epinephrine bitartrate is (–) - 3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol (+)-tartrate (1:1) salt. Epinephrine is a vasoconstrictor. It has the following structural formula. MARCAINE (bupivacaine hydrochloride) is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. MARCAINE with epinephrine 1:200,000 (as bitartrate) is a clear and colorless sterile isotonic solution. Each mL contains 2.5 mg or 5 mg bupivacaine hydrochloride (equivalent to 2.22 mg or 4.44 mg of bupivacaine, respectively), and 0.0091 mg epinephrine bitartrate (equivalent to 0.005 mg of epinephrine), with sodium chloride for isotonicity, 0.5 mg sodium metabisulfite, 0.001 mL monothioglycerol, and 2 mg ascorbic acid as antioxidants, 0.0017 mL 60% sodium lactate buffer, and 0.1 mg edetate calcium disodium as stabilizer. The pH of these solutions is adjusted to between 3.4 and 4.5 with sodium hydroxide or hydrochloric acid. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. The specific gravity of MARCAINE 0.5% with epinephrine 1:200,000 (as bitartrate) at 25°C is 1.008 and at 37°C is 1.008."
},
{
"NDCCode": "0409-1746-30",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0409-1746-30) / 30 mL in 1 VIAL, SINGLE-DOSE (0409-1746-71) ",
"NDC11Code": "00409-1746-30",
"ProductNDC": "0409-1746",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Marcaine With Epinephrine",
"NonProprietaryName": "Bupivacaine Hydrochloride And Epinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20050912",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016964",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "2.5; .0091",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050912",
"SamplePackage": "N",
"IndicationAndUsage": "MARCAINE / MARCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of MARCAINE / MARCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "MARCAINE / MARCAINE WITH EPINEPHRINE contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for MARCAINE (without epinephrine) is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. The route of administration for MARCAINE WITH EPINEPHRINE is by injection, for infiltration, perineural, caudal, or epidural use. Multiple-dose vials contain methylparaben [see Warnings and Precautions (5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. MARCAINE with 1:200,000 epinephrine, contains bupivacaine hydrochloride and epinephrine bitartrate (an alpha and beta-adrenergic agonist) as active pharmaceutical ingredients. This product is for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Epinephrine bitartrate is (–) - 3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol (+)-tartrate (1:1) salt. Epinephrine is a vasoconstrictor. It has the following structural formula. MARCAINE (bupivacaine hydrochloride) is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. MARCAINE with epinephrine 1:200,000 (as bitartrate) is a clear and colorless sterile isotonic solution. Each mL contains 2.5 mg or 5 mg bupivacaine hydrochloride (equivalent to 2.22 mg or 4.44 mg of bupivacaine, respectively), and 0.0091 mg epinephrine bitartrate (equivalent to 0.005 mg of epinephrine), with sodium chloride for isotonicity, 0.5 mg sodium metabisulfite, 0.001 mL monothioglycerol, and 2 mg ascorbic acid as antioxidants, 0.0017 mL 60% sodium lactate buffer, and 0.1 mg edetate calcium disodium as stabilizer. The pH of these solutions is adjusted to between 3.4 and 4.5 with sodium hydroxide or hydrochloric acid. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. The specific gravity of MARCAINE 0.5% with epinephrine 1:200,000 (as bitartrate) at 25°C is 1.008 and at 37°C is 1.008."
},
{
"NDCCode": "0955-1746-01",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 BOX (0955-1746-01) / 20 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "00955-1746-01",
"ProductNDC": "0955-1746",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clofarabine",
"NonProprietaryName": "Clofarabine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170511",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021673",
"LabelerName": "Winthrop U.S, a business of sanofi-aventis U.S. LLC",
"SubstanceName": "CLOFARABINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20170511",
"SamplePackage": "N",
"IndicationAndUsage": "Clofarabine is indicated for the treatment of pediatric patients 1 to 21 years old with relapsed or refractory acute lymphoblastic leukemia after at least two prior regimens. This indication is based upon response rate. There are no trials verifying an improvement in disease-related symptoms or increased survival with clofarabine.",
"Description": "Clofarabine injection contains clofarabine, a purine nucleoside metabolic inhibitor. The chemical name of clofarabine is 2-chloro-9-(2-deoxy-2-fluoro-β-D-arabinofuranosyl)-9H-purin-6-amine. Its molecular formula is C 10H 11ClFN 5O 3with a molecular weight of 303.68 Daltons. The molecular structure of clofarabine is. Clofarabine (1 mg/mL) is supplied in a 20 mL, single-dose vial. The 20 mL vial contains 20 mg clofarabine formulated in 20 mL unbuffered normal saline (comprised of Water for Injection, USP, and Sodium Chloride, USP). The pH range of the solution is 4.5 to 7.5. The solution is sterile, clear and practically colorless, and is preservative-free."
},
{
"NDCCode": "65044-0020-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0020-1) ",
"NDC11Code": "65044-0020-01",
"ProductNDC": "65044-0020",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Tetrakis(2-methoxyisobutylisocyanide)copper(i) Tetrafluoroborate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"StartMarketingDate": "20161019",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "TETRAKIS(2-METHOXYISOBUTYLISOCYANIDE)COPPER(I) TETRAFLUOROBORATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Status": "Unfinished",
"LastUpdate": "2026-06-03",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19-OCT-16"
},
{
"NDCCode": "65044-0040-1",
"PackageDescription": "1.5 mL in 1 VIAL, GLASS (65044-0040-1) ",
"NDC11Code": "65044-0040-01",
"ProductNDC": "65044-0040",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Perflutren",
"DosageFormName": "INJECTION, SUSPENSION",
"StartMarketingDate": "20130205",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "PERFLUTREN",
"StrengthNumber": "6.52",
"StrengthUnit": "mg/mL",
"Status": "Unfinished",
"LastUpdate": "2023-12-05",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "05-FEB-13"
},
{
"NDCCode": "65044-0537-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0537-1) ",
"NDC11Code": "65044-0537-01",
"ProductNDC": "65044-0537",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bermuda Grass",
"NonProprietaryName": "Standardized Grass Pollen, Bermuda Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103872",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "CYNODON DACTYLON POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0538-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0538-5) ",
"NDC11Code": "65044-0538-05",
"ProductNDC": "65044-0538",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bermuda Grass",
"NonProprietaryName": "Standardized Grass Pollen, Bermuda Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103872",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "CYNODON DACTYLON POLLEN",
"StrengthNumber": "100",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0545-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0545-1) ",
"NDC11Code": "65044-0545-01",
"ProductNDC": "65044-0545",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"NonProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103873",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0546-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0546-1) ",
"NDC11Code": "65044-0546-01",
"ProductNDC": "65044-0546",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"NonProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103873",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0547-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0547-5) ",
"NDC11Code": "65044-0547-05",
"ProductNDC": "65044-0547",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"NonProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103873",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "100",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0548-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0548-5) ",
"NDC11Code": "65044-0548-05",
"ProductNDC": "65044-0548",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"NonProprietaryName": "Standardized Grass Pollen, Bluegrass, Kentucky June",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103873",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "1000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0611-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0611-1) ",
"NDC11Code": "65044-0611-01",
"ProductNDC": "65044-0611",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"NonProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103874",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "LOLIUM PRATENSE POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0612-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0612-1) ",
"NDC11Code": "65044-0612-01",
"ProductNDC": "65044-0612",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"NonProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103874",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "LOLIUM PRATENSE POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0613-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0613-5) ",
"NDC11Code": "65044-0613-05",
"ProductNDC": "65044-0613",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"NonProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103874",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "FESTUCA PRATENSIS POLLEN",
"StrengthNumber": "100",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0614-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0614-5) ",
"NDC11Code": "65044-0614-05",
"ProductNDC": "65044-0614",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"NonProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103874",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "FESTUCA PRATENSIS POLLEN",
"StrengthNumber": "1000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0718-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0718-1) ",
"NDC11Code": "65044-0718-01",
"ProductNDC": "65044-0718",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"NonProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103875",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0719-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0719-1) ",
"NDC11Code": "65044-0719-01",
"ProductNDC": "65044-0719",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"NonProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103875",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0720-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0720-5) ",
"NDC11Code": "65044-0720-05",
"ProductNDC": "65044-0720",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"NonProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103875",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "100",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0721-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0721-5) ",
"NDC11Code": "65044-0721-05",
"ProductNDC": "65044-0721",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"NonProprietaryName": "Standardized Grass Pollen, Orchard Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103875",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "DACTYLIS GLOMERATA POLLEN",
"StrengthNumber": "1000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0777-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0777-1) ",
"NDC11Code": "65044-0777-01",
"ProductNDC": "65044-0777",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Redtop",
"NonProprietaryName": "Standardized Grass Pollen, Redtop",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103876",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0778-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0778-1) ",
"NDC11Code": "65044-0778-01",
"ProductNDC": "65044-0778",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Redtop",
"NonProprietaryName": "Standardized Grass Pollen, Redtop",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103876",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0779-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0779-5) ",
"NDC11Code": "65044-0779-05",
"ProductNDC": "65044-0779",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Redtop",
"NonProprietaryName": "Standardized Grass Pollen, Redtop",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103876",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "100",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0780-5",
"PackageDescription": "5 mL in 1 VIAL (65044-0780-5) ",
"NDC11Code": "65044-0780-05",
"ProductNDC": "65044-0780",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Redtop",
"NonProprietaryName": "Standardized Grass Pollen, Redtop",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103876",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "1000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.",
"Description": "The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the \"Concentrate\" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate."
},
{
"NDCCode": "65044-0787-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0787-1) ",
"NDC11Code": "65044-0787-01",
"ProductNDC": "65044-0787",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Ryegrass",
"NonProprietaryName": "Standardized Grass Pollen, Ryegrass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103877",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "LOLIUM PERENNE POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "65044-0788-1",
"PackageDescription": "5 mL in 1 VIAL (65044-0788-1) ",
"NDC11Code": "65044-0788-01",
"ProductNDC": "65044-0788",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Ryegrass",
"NonProprietaryName": "Standardized Grass Pollen, Ryegrass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103877",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "LOLIUM PERENNE POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>65044-1746-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-1746-5) </PackageDescription>
<NDC11Code>65044-1746-05</NDC11Code>
<ProductNDC>65044-1746</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Pollens - Grasses, Johnson Grass Sorghum Halepense</ProprietaryName>
<NonProprietaryName>Johnson Grass Sorghum Halepense</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>SORGHUM HALEPENSE POLLEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Certain diagnostics carry labeling which states Allergenic Extract for Diagnostic Use Only. Data to support the therapeutic use of products labeled with this statement have not been established.15. In addition to a carefully taken history, the use of intradermal testing extracts is an accepted method in the diagnosis of allergenic conditions.1, 2, 3 When scratch, prick or puncture reactions are small, or if the patient gives a history of allergic symptoms to a substance but scratch, prick or puncture tests are inconclusive, intradermal tests may be indicated. However, ANTIGENS PRODUCING LARGE 3 TO 4+ SCRATCH, PRICK OR PUNCTURE TESTS SHOULD NOT BE TESTED INTRADERMALLY. Extracts of all allergens do not produce equivalent results in intradermal testing. The intensity of the skin reaction produced will be determined by two factors: the degree of sensitivity of the patient and the nature of the antigenic extract applied. In general, pollen extracts produce whealing reactions, whereas other inhalants produce erythematous reactions with wheals less often. Skin tests to foods seldom produce whealing reactions except for infrequent instances of severe sensitivity to fish, nuts or spices, and rarely other foods.</IndicationAndUsage>
<Description>Extracts for intradermal testing are supplied in sterile multi-dose vials containing, in addition to the extract allergens and antigens, 0.5% sodium chloride, 0.275% sodium bicarbonate, up to 2% glycerin, 2.5% glycerin for AP products, and, as preservative, 0.4% phenol. The strength of these extracts may be expressed in terms of:. 1. Weight to Volume (w/v) 2. Protein Nitrogen Units/mL (PNU/mL)3. Allergy Units/mL (AU/mL)4. Bioequivalent Allergy Units/mL (BAU/mL)5. Concentrate: 1 Weight to volume (w/v). For regular extracts this describes the extraction ratio, i.e., the amount of crude allergen added to the extracting fluid. A 1:10 extract, therefore, indicates that the solution contains the extracted material from one gram of raw material added to each 10 mL of extracting fluid. The amount and composition of extracted material will vary with the kind of antigen, the extracting fluid, duration of extraction, pH, temperature, and other variables. In contrast to this, AP (acetone precipitated) extracts, if present, are prepared by reconstituting dry allergenically active concentrates produced by a precipitation process from extracts of raw materials. For those AP extracts labeled on a weight per volume (w/v) basis, the strength designation indicates the dry weight of finished (acetone) precipitate per volume of reconstituting fluid. For example, 1:50 (w/v) means that each gram of dry precipitate obtained from the original extract is reconstituted in 50 mL of solution., 2 Protein Nitrogen Units per mL (PNU/mL). One protein nitrogen unit represents 0.00001 mg phosphotungstic acid-precipitable protein nitrogen dissolved in one mL of antigen extract. The PNU content of extracts of the same antigen may vary according to the method of measuring the PNU. Thus, PNU contents of extracts from different manufacturers are not comparable unless the PNU method is known to be the same and reproducible from lot to lot. Also, the amount of protein nitrogen extracted from an antigen is influenced by the same variables as the weight to volume extract. Allergenic materials make up a variable proportion of the total protein of an extract., 3 Allergy Units per mL (AU/mL). The potency of standardized AP and regular extracts labeled in Allergy Units (AU)/mL is determined by in vitro comparison to the reference standard established by the Center for Biologics Evaluation and Research (CBER) of the Food and Drug Administration., 4 Bioequivalent Allergy Units per mL(BAU/mL). When originally licensed, the Reference Preparations for standardized extracts were arbitrarily assigned 100,000 Allergy Units (AU)/mL. Subsequently, quantitative skin testing by the ID50EAL method14 was used to determine that some Reference Preparations should be assigned 10,000 AU/mL, and others 100,000 AU/mL. To avoid possible confusion about this change in the method of allergy unit assignment, the nomenclature changed for standardized extracts whose allergy units are assigned based on quantitative skin testing, and are labeled in Bioequivalent Allergy Units (BAU)/mL. References labeled 10,000 BAU/mL can be diluted one to a half million fold, and references labeled 100,000 BAU/mL can be diluted one to 5 million fold and produce a sum of erythema diameter of 50 mm when Intradermal testing highly reactive subjects., 5 Concentrate. Concentrate label terminology applies to allergenic extract mixtures, where the individual allergens being combined vary in strength or the designation of strength.</Description>
</NDC>
<NDC>
<NDCCode>36987-1746-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-1746-1)</PackageDescription>
<NDC11Code>36987-1746-01</NDC11Code>
<ProductNDC>36987-1746</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Thyme</ProprietaryName>
<NonProprietaryName>Thym</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>GARDEN THYME</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dietary Proteins [CS],Food Additives [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>54569-1746-5</NDCCode>
<PackageDescription>15 CAPSULE in 1 BOTTLE (54569-1746-5)</PackageDescription>
<NDC11Code>54569-1746-05</NDC11Code>
<ProductNDC>54569-1746</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065271</ApplicationNumber>
<LabelerName>A-S Medication Solutions LLC</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>70771-1746-5</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (70771-1746-5) </PackageDescription>
<NDC11Code>70771-1746-05</NDC11Code>
<ProductNDC>70771-1746</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Darunavir</ProprietaryName>
<NonProprietaryName>Darunavir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214085</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>DARUNAVIR</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1746-5</NDCCode>
<PackageDescription>20 CAPSULE, DELAYED RELEASE in 1 BOTTLE (71335-1746-5) </PackageDescription>
<NDC11Code>71335-1746-05</NDC11Code>
<ProductNDC>71335-1746</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075410</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1), 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2), 3 Treatment of active benign gastric ulcer in adults (1.3), 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4), 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5), 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6), 7 Pathologic hypersecretory conditions in adults (1.7).</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol.</Description>
</NDC>
<NDC>
<NDCCode>0409-1746-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0409-1746-10) / 10 mL in 1 VIAL, SINGLE-DOSE (0409-1746-70) </PackageDescription>
<NDC11Code>00409-1746-10</NDC11Code>
<ProductNDC>0409-1746</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Marcaine With Epinephrine</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20050912</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016964</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>2.5; .0091</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MARCAINE / MARCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of MARCAINE / MARCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>MARCAINE / MARCAINE WITH EPINEPHRINE contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for MARCAINE (without epinephrine) is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. The route of administration for MARCAINE WITH EPINEPHRINE is by injection, for infiltration, perineural, caudal, or epidural use. Multiple-dose vials contain methylparaben [see Warnings and Precautions (5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. MARCAINE with 1:200,000 epinephrine, contains bupivacaine hydrochloride and epinephrine bitartrate (an alpha and beta-adrenergic agonist) as active pharmaceutical ingredients. This product is for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Epinephrine bitartrate is (–) - 3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol (+)-tartrate (1:1) salt. Epinephrine is a vasoconstrictor. It has the following structural formula. MARCAINE (bupivacaine hydrochloride) is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. MARCAINE with epinephrine 1:200,000 (as bitartrate) is a clear and colorless sterile isotonic solution. Each mL contains 2.5 mg or 5 mg bupivacaine hydrochloride (equivalent to 2.22 mg or 4.44 mg of bupivacaine, respectively), and 0.0091 mg epinephrine bitartrate (equivalent to 0.005 mg of epinephrine), with sodium chloride for isotonicity, 0.5 mg sodium metabisulfite, 0.001 mL monothioglycerol, and 2 mg ascorbic acid as antioxidants, 0.0017 mL 60% sodium lactate buffer, and 0.1 mg edetate calcium disodium as stabilizer. The pH of these solutions is adjusted to between 3.4 and 4.5 with sodium hydroxide or hydrochloric acid. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. The specific gravity of MARCAINE 0.5% with epinephrine 1:200,000 (as bitartrate) at 25°C is 1.008 and at 37°C is 1.008.</Description>
</NDC>
<NDC>
<NDCCode>0409-1746-30</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0409-1746-30) / 30 mL in 1 VIAL, SINGLE-DOSE (0409-1746-71) </PackageDescription>
<NDC11Code>00409-1746-30</NDC11Code>
<ProductNDC>0409-1746</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Marcaine With Epinephrine</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20050912</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016964</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>2.5; .0091</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MARCAINE / MARCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of MARCAINE / MARCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>MARCAINE / MARCAINE WITH EPINEPHRINE contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for MARCAINE (without epinephrine) is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. The route of administration for MARCAINE WITH EPINEPHRINE is by injection, for infiltration, perineural, caudal, or epidural use. Multiple-dose vials contain methylparaben [see Warnings and Precautions (5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. MARCAINE with 1:200,000 epinephrine, contains bupivacaine hydrochloride and epinephrine bitartrate (an alpha and beta-adrenergic agonist) as active pharmaceutical ingredients. This product is for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Epinephrine bitartrate is (–) - 3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol (+)-tartrate (1:1) salt. Epinephrine is a vasoconstrictor. It has the following structural formula. MARCAINE (bupivacaine hydrochloride) is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. MARCAINE with epinephrine 1:200,000 (as bitartrate) is a clear and colorless sterile isotonic solution. Each mL contains 2.5 mg or 5 mg bupivacaine hydrochloride (equivalent to 2.22 mg or 4.44 mg of bupivacaine, respectively), and 0.0091 mg epinephrine bitartrate (equivalent to 0.005 mg of epinephrine), with sodium chloride for isotonicity, 0.5 mg sodium metabisulfite, 0.001 mL monothioglycerol, and 2 mg ascorbic acid as antioxidants, 0.0017 mL 60% sodium lactate buffer, and 0.1 mg edetate calcium disodium as stabilizer. The pH of these solutions is adjusted to between 3.4 and 4.5 with sodium hydroxide or hydrochloric acid. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative. The specific gravity of MARCAINE 0.5% with epinephrine 1:200,000 (as bitartrate) at 25°C is 1.008 and at 37°C is 1.008.</Description>
</NDC>
<NDC>
<NDCCode>0955-1746-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 BOX (0955-1746-01) / 20 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>00955-1746-01</NDC11Code>
<ProductNDC>0955-1746</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clofarabine</ProprietaryName>
<NonProprietaryName>Clofarabine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170511</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021673</ApplicationNumber>
<LabelerName>Winthrop U.S, a business of sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>CLOFARABINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clofarabine is indicated for the treatment of pediatric patients 1 to 21 years old with relapsed or refractory acute lymphoblastic leukemia after at least two prior regimens. This indication is based upon response rate. There are no trials verifying an improvement in disease-related symptoms or increased survival with clofarabine.</IndicationAndUsage>
<Description>Clofarabine injection contains clofarabine, a purine nucleoside metabolic inhibitor. The chemical name of clofarabine is 2-chloro-9-(2-deoxy-2-fluoro-β-D-arabinofuranosyl)-9H-purin-6-amine. Its molecular formula is C 10H 11ClFN 5O 3with a molecular weight of 303.68 Daltons. The molecular structure of clofarabine is. Clofarabine (1 mg/mL) is supplied in a 20 mL, single-dose vial. The 20 mL vial contains 20 mg clofarabine formulated in 20 mL unbuffered normal saline (comprised of Water for Injection, USP, and Sodium Chloride, USP). The pH range of the solution is 4.5 to 7.5. The solution is sterile, clear and practically colorless, and is preservative-free.</Description>
</NDC>
<NDC>
<NDCCode>65044-0020-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0020-1) </PackageDescription>
<NDC11Code>65044-0020-01</NDC11Code>
<ProductNDC>65044-0020</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Tetrakis(2-methoxyisobutylisocyanide)copper(i) Tetrafluoroborate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<StartMarketingDate>20161019</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>TETRAKIS(2-METHOXYISOBUTYLISOCYANIDE)COPPER(I) TETRAFLUOROBORATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-06-03</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19-OCT-16</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>65044-0040-1</NDCCode>
<PackageDescription>1.5 mL in 1 VIAL, GLASS (65044-0040-1) </PackageDescription>
<NDC11Code>65044-0040-01</NDC11Code>
<ProductNDC>65044-0040</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Perflutren</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<StartMarketingDate>20130205</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>PERFLUTREN</SubstanceName>
<StrengthNumber>6.52</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-12-05</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>05-FEB-13</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>65044-0537-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0537-1) </PackageDescription>
<NDC11Code>65044-0537-01</NDC11Code>
<ProductNDC>65044-0537</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bermuda Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bermuda Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103872</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0538-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0538-5) </PackageDescription>
<NDC11Code>65044-0538-05</NDC11Code>
<ProductNDC>65044-0538</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bermuda Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bermuda Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103872</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0545-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0545-1) </PackageDescription>
<NDC11Code>65044-0545-01</NDC11Code>
<ProductNDC>65044-0545</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103873</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0546-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0546-1) </PackageDescription>
<NDC11Code>65044-0546-01</NDC11Code>
<ProductNDC>65044-0546</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103873</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0547-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0547-5) </PackageDescription>
<NDC11Code>65044-0547-05</NDC11Code>
<ProductNDC>65044-0547</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103873</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0548-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0548-5) </PackageDescription>
<NDC11Code>65044-0548-05</NDC11Code>
<ProductNDC>65044-0548</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Bluegrass, Kentucky June</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103873</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0611-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0611-1) </PackageDescription>
<NDC11Code>65044-0611-01</NDC11Code>
<ProductNDC>65044-0611</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Fescue, Meadow</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Fescue, Meadow</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103874</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>LOLIUM PRATENSE POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0612-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0612-1) </PackageDescription>
<NDC11Code>65044-0612-01</NDC11Code>
<ProductNDC>65044-0612</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Fescue, Meadow</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Fescue, Meadow</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103874</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>LOLIUM PRATENSE POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0613-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0613-5) </PackageDescription>
<NDC11Code>65044-0613-05</NDC11Code>
<ProductNDC>65044-0613</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Fescue, Meadow</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Fescue, Meadow</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103874</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>FESTUCA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0614-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0614-5) </PackageDescription>
<NDC11Code>65044-0614-05</NDC11Code>
<ProductNDC>65044-0614</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Fescue, Meadow</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Fescue, Meadow</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103874</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>FESTUCA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0718-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0718-1) </PackageDescription>
<NDC11Code>65044-0718-01</NDC11Code>
<ProductNDC>65044-0718</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Orchard Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Orchard Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103875</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0719-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0719-1) </PackageDescription>
<NDC11Code>65044-0719-01</NDC11Code>
<ProductNDC>65044-0719</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Orchard Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Orchard Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103875</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0720-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0720-5) </PackageDescription>
<NDC11Code>65044-0720-05</NDC11Code>
<ProductNDC>65044-0720</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Orchard Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Orchard Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103875</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0721-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0721-5) </PackageDescription>
<NDC11Code>65044-0721-05</NDC11Code>
<ProductNDC>65044-0721</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Orchard Grass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Orchard Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103875</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0777-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0777-1) </PackageDescription>
<NDC11Code>65044-0777-01</NDC11Code>
<ProductNDC>65044-0777</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Redtop</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Redtop</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103876</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0778-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0778-1) </PackageDescription>
<NDC11Code>65044-0778-01</NDC11Code>
<ProductNDC>65044-0778</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Redtop</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Redtop</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103876</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0779-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0779-5) </PackageDescription>
<NDC11Code>65044-0779-05</NDC11Code>
<ProductNDC>65044-0779</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Redtop</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Redtop</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103876</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0780-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0780-5) </PackageDescription>
<NDC11Code>65044-0780-05</NDC11Code>
<ProductNDC>65044-0780</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Redtop</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Redtop</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103876</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>16, 17, 18, 20. Standardized glycerinated allergenic extracts in potencies of 10,000 BAU/mL and 100,000 BAU/mL are indicated for use in diagnosis and immunotherapy of patients presenting symptoms of allergy (hay fever, rhinitis, etc.) to specific grass pollens. Concentrated extracts must be diluted prior to use in intradermal testing and immunotherapy. The selection of allergenic extracts to be used should be based on a thorough and carefully taken history of hypersensitivity, and confirmed by skin testing. 27, 28 10,000 BAU/mL dose form should be used initially for percutaneous testing. If negative, the 100,000 BAU/mL dose can be used. The use of mixed or unrelated antigens for skin testing is not recommended since, in the case of a positive reaction, it does not indicate which component of the mix is responsible for the reaction, while, in the case of a negative reaction, it fails to indicate whether the individual antigens at full concentration would give a positive reaction. Utilization of such mixes for compounding a treatment may result, in the former case, in administering unnecessary antigens and, in the latter case, in the omission of a needed allergen. Allergens to which a patient is extremely sensitive should not be included in treatment mixes with allergens to which there is much less sensitivity, but should be administered separately. This allows individualized and better control of dosage increases, including adjustments in dosage becoming necessary after severe reactions which may occur to the highly reactive allergen. Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products.</IndicationAndUsage>
<Description>The grass pollens available in standardized form are: Bermuda Grass (Cynodon dactylon), Orchard Grass (Dactylis glomerata), Perennial Ryegrass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky Bluegrass (Poa pratensis), Meadow Fescue (Festuca elatior), and Sweet Vernalgrass (Anthoxanthum odoratum). The pollen extracts are intended for subcutaneous injection for immunotherapy; and intradermal and prick or puncture for diagnosis. Pollen extracts are sterile solutions containing the extractables of pollens, 0.5% Sodium Chloride, 0.275% Sodium Bicarbonate, and 50% Glycerin by volume as a preservative. Sterile, diluted Standardized Grass Pollen Extracts available for intradermal testing contain 0.9% sodium chloride, not more than 0.5% glycerin by volume, 0.03% sodium bicarbonate, and 0.4% phenol as a preservative. Source material for the extracts is collected using techniques such as water set or vacuuming. Source material for allergenic extracts contains no more than a total of 1% of detectable foreign materials (99% pollen purity). Note: BAU/mL Standardized grass pollens are not interchangeable with any other grass pollen products. Product Concentration:1. Bioequivalent Allergy Units. These allergenic extracts are labeled in Bioequivalent Allergy Units/mL (BAU/mL) based on their comparison (by ELISA Competition) to Center for Biologics Evaluation and Research (CBER), Food and Drug Administration (FDA) Reference Preparations.2 The FDA reference extracts have been assigned Bioequivalent Allergy Units based on the CBER ID50EAL method.5 Briefly, highly sensitive patients are skin tested to the reference preparation using an intradermal technique employing 3-fold extract dilutions. Depending on the dilution which elicits a summation of erythema diameter of 50mm (D50), Bioequivalent Allergy Units are assigned as follows. The vial potency of Mixtures of Standardized Grasses is calculated by summation of the BAU/mL values of the components of the ingredient list which expresses the potency of each component per mL of the mixture. 2. Concentrate.a. Concentrate label terminology applies to allergenic extract Custom Mixtures where the individual allergens being combined vary in strength or the designation of strength. Should the physician choose to calculate the actual strength of each component in the "Concentrate" mixture, the following formulation may be used. b. In the list of components portion of the product label for Stock Mixtures Containing Standardized Grasses, the potency of each component is calculated to express the potency of each component per 1 mL of the mixture. Vial potency is expressed as concentrate, or as a volume/volume dilution of concentrate.</Description>
</NDC>
<NDC>
<NDCCode>65044-0787-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0787-1) </PackageDescription>
<NDC11Code>65044-0787-01</NDC11Code>
<ProductNDC>65044-0787</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Ryegrass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Ryegrass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103877</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>LOLIUM PERENNE POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>65044-0788-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-0788-1) </PackageDescription>
<NDC11Code>65044-0788-01</NDC11Code>
<ProductNDC>65044-0788</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Ryegrass</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Ryegrass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103877</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>LOLIUM PERENNE POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
</NDCList>