RESTful Lookup — Test-Drive (2007 – 2026)

{
  "NDC": [
    {
      "NDCCode": "65162-538-16",
      "PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (65162-538-16) ",
      "NDC11Code": "65162-0538-16",
      "ProductNDC": "65162-538",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Levetiracetam",
      "NonProprietaryName": "Levetiracetam",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20130228",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA090767",
      "LabelerName": "Amneal Pharmaceuticals LLC",
      "SubstanceName": "LEVETIRACETAM",
      "StrengthNumber": "750",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
      "Status": "Active",
      "LastUpdate": "2024-10-30",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20130228",
      "SamplePackage": "N",
      "IndicationAndUsage": "Levetiracetam tablets are indicated for adjunctive therapy in the treatment of: : 1 Partial onset seizures in patients one month of age and older with epilepsy (1.1), 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).",
      "Description": "Levetiracetam, USP is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (dark pink), and 1,000 mg (white) tablets for oral administration. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam tablets, USP contain the labeled amount of levetiracetam, USP. Inactive ingredients: copovidone, croscarmellose sodium, magnesium stearate, polyethylene glycol 3350, polysorbate 80, polyvinyl alcohol, pregelatinized starch, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue #2/Indigo Carmine Aluminum Lake. 500 mg tablets: Iron Oxide Yellow. 750 mg tablets: FD&C Red #40/Allura Red A C Aluminum Lake. Dissolution Method: Test 3."
    },
    {
      "NDCCode": "43353-538-16",
      "PackageDescription": "6000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (43353-538-16)",
      "NDC11Code": "43353-0538-16",
      "ProductNDC": "43353-538",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Bupropion Hydrochloride",
      "NonProprietaryName": "Bupropion Hydrochloride",
      "DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20090702",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA079095",
      "LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
      "SubstanceName": "BUPROPION HYDROCHLORIDE",
      "StrengthNumber": "100",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2020-01-01",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20191231",
      "IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.",
      "Description": "Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1- dimethylethyl)amino]-1 -propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100 mg, 150 mg, and 200 mg white to off-white, film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the following inactive ingredients:  hydroxypropyl cellulose, microcrystalline cellulose, colloidal silicon dioxide, stearic acid, magnesium stearate, and diluted hydrochloric acid. The film coating contains lactose monohydrate, hydroxypropyl cellulose, titanium dioxide, and polyethylene glycol."
    },
    {
      "NDCCode": "65841-538-16",
      "PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (65841-538-16) ",
      "NDC11Code": "65841-0538-16",
      "ProductNDC": "65841-538",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Potassium Citrate",
      "NonProprietaryName": "Potassium Citrate",
      "DosageFormName": "TABLET, EXTENDED RELEASE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20140812",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203546",
      "LabelerName": "Zydus Lifesciences Limited",
      "SubstanceName": "POTASSIUM CITRATE",
      "StrengthNumber": "15",
      "StrengthUnit": "meq/1",
      "Pharm_Classes": "Acidifying Activity [MoA], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE]",
      "Status": "Active",
      "LastUpdate": "2023-10-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20140812",
      "SamplePackage": "N",
      "IndicationAndUsage": "Potassium citrate extended-release tablet is a citrate salt of potassium indicated for the management of: : 1 Renal tubular acidosis (RTA) with calcium stones (1.1) , 2 Hypocitraturic calcium oxalate nephrolithiasis of any etiology (1.2), 3 Uric acid lithiasis with or without calcium stones (1.3).",
      "Description": "Potassium citrate is a citrate salt of potassium. Its molecular formula is K3C6H5O7  H2O, and it has the following chemical structure. Potassium citrate, USP is a transparent crystals or white, granular powder. It is freely soluble in water and slightly soluble in alcohol. Potassium citrate extended-release tablets, USP intended for oral administration, each contains 5 mEq (540 mg), 10 mEq (1,080 mg) or 15 mEq (1,620 mg) of potassium citrate, USP as monohydrate. In addition, each tablet contains the following inactive ingredients: carnauba wax and magnesium stearate. Meets USP Dissolution Test 2."
    },
    {
      "NDCCode": "68382-538-16",
      "PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-538-16) ",
      "NDC11Code": "68382-0538-16",
      "ProductNDC": "68382-538",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Potassium Citrate",
      "NonProprietaryName": "Potassium Citrate",
      "DosageFormName": "TABLET, EXTENDED RELEASE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20140812",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203546",
      "LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
      "SubstanceName": "POTASSIUM CITRATE",
      "StrengthNumber": "15",
      "StrengthUnit": "meq/1",
      "Pharm_Classes": "Acidifying Activity [MoA], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE]",
      "Status": "Active",
      "LastUpdate": "2023-10-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20140812",
      "SamplePackage": "N",
      "IndicationAndUsage": "Potassium citrate extended-release tablet is a citrate salt of potassium indicated for the management of: : 1 Renal tubular acidosis (RTA) with calcium stones (1.1) , 2 Hypocitraturic calcium oxalate nephrolithiasis of any etiology (1.2), 3 Uric acid lithiasis with or without calcium stones (1.3).",
      "Description": "Potassium citrate is a citrate salt of potassium. Its molecular formula is K3C6H5O7  H2O, and it has the following chemical structure. Potassium citrate, USP is a transparent crystals or white, granular powder. It is freely soluble in water and slightly soluble in alcohol. Potassium citrate extended-release tablets, USP intended for oral administration, each contains 5 mEq (540 mg), 10 mEq (1,080 mg) or 15 mEq (1,620 mg) of potassium citrate, USP as monohydrate. In addition, each tablet contains the following inactive ingredients: carnauba wax and magnesium stearate. Meets USP Dissolution Test 2."
    },
    {
      "NDCCode": "65162-034-16",
      "PackageDescription": "120 CAPSULE, LIQUID FILLED in 1 BOTTLE (65162-034-16) ",
      "NDC11Code": "65162-0034-16",
      "ProductNDC": "65162-034",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Omega-3-acid Ethyl Esters",
      "NonProprietaryName": "Omega-3-acid Ethyl Esters",
      "DosageFormName": "CAPSULE, LIQUID FILLED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20151130",
      "EndMarketingDate": "20260701",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204940",
      "LabelerName": "Amneal Pharmaceuticals LLC",
      "SubstanceName": "OMEGA-3-ACID ETHYL ESTERS",
      "StrengthNumber": "1",
      "StrengthUnit": "g/1",
      "Pharm_Classes": "Fatty Acids, Omega-3 [CS], Omega-3 Fatty Acid [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2026-07-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20151130",
      "EndMarketingDatePackage": "20260701",
      "SamplePackage": "N",
      "IndicationAndUsage": "Omega-3-acid ethyl esters capsules are indicated as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (greater than or equal to 500 mg/dL) hypertriglyceridemia. Usage Considerations: Patients should be placed on an appropriate lipid-lowering diet before receiving omega-3-acid ethyl esters capsules and should continue this diet during treatment with omega-3-acid ethyl esters capsules. Laboratory studies should be done to ascertain that the lipid levels are consistently abnormal before instituting therapy with omega-3-acid ethyl esters capsules. Every attempt should be made to control serum lipids with appropriate diet, exercise, weight loss in obese patients, and control of any medical problems such as diabetes mellitus and hypothyroidism that are contributing to the lipid abnormalities. Medications known to exacerbate hypertriglyceridemia (such as beta blockers, thiazides, estrogens) should be discontinued or changed, if possible, prior to consideration of TG-lowering drug therapy. Limitations of Use. The effect of omega-3-acid ethyl esters capsules on the risk for pancreatitis has not been determined. The effect of omega-3-acid ethyl esters capsules on cardiovascular mortality and morbidity has not been determined.",
      "Description": "Omega-3-acid ethyl esters, USP, a lipid-regulating agent, are supplied as a liquid-filled gel capsule for oral administration. Each 1 gram capsule of omega-3-acid ethyl esters, USP contains at least 900 mg of the ethyl esters of omega-3 fatty acids sourced from fish oils. These are predominantly a combination of ethyl esters of eicosapentaenoic acid (EPA - approximately 465 mg) and docosahexaenoic acid (DHA - approximately 375 mg). The empirical formula of EPA ethyl ester is C22H34O2, and the molecular weight of EPA ethyl ester is 330.51. The structural formula of EPA ethyl ester is. The empirical formula of DHA ethyl ester is C24H36O2, and the molecular weight of DHA ethyl ester is 356.55. The structural formula of DHA ethyl ester is. Omega-3-acid ethyl esters capsules, USP also contain the following inactive ingredients: alpha-tocopherol, gelatin, glycerin and purified water (components of the capsule shell)."
    },
    {
      "NDCCode": "65162-528-16",
      "PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (65162-528-16) ",
      "NDC11Code": "65162-0528-16",
      "ProductNDC": "65162-528",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Levetiracetam",
      "NonProprietaryName": "Levetiracetam",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20130228",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA090767",
      "LabelerName": "Amneal Pharmaceuticals LLC",
      "SubstanceName": "LEVETIRACETAM",
      "StrengthNumber": "250",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
      "Status": "Active",
      "LastUpdate": "2024-10-30",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20130228",
      "SamplePackage": "N",
      "IndicationAndUsage": "Levetiracetam tablets are indicated for adjunctive therapy in the treatment of: : 1 Partial onset seizures in patients one month of age and older with epilepsy (1.1), 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).",
      "Description": "Levetiracetam, USP is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (dark pink), and 1,000 mg (white) tablets for oral administration. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam tablets, USP contain the labeled amount of levetiracetam, USP. Inactive ingredients: copovidone, croscarmellose sodium, magnesium stearate, polyethylene glycol 3350, polysorbate 80, polyvinyl alcohol, pregelatinized starch, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue #2/Indigo Carmine Aluminum Lake. 500 mg tablets: Iron Oxide Yellow. 750 mg tablets: FD&C Red #40/Allura Red A C Aluminum Lake. Dissolution Method: Test 3."
    },
    {
      "NDCCode": "65162-529-16",
      "PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (65162-529-16) ",
      "NDC11Code": "65162-0529-16",
      "ProductNDC": "65162-529",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Levetiracetam",
      "NonProprietaryName": "Levetiracetam",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20130228",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA090767",
      "LabelerName": "Amneal Pharmaceuticals LLC",
      "SubstanceName": "LEVETIRACETAM",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
      "Status": "Active",
      "LastUpdate": "2024-10-30",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20130228",
      "SamplePackage": "N",
      "IndicationAndUsage": "Levetiracetam tablets are indicated for adjunctive therapy in the treatment of: : 1 Partial onset seizures in patients one month of age and older with epilepsy (1.1), 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).",
      "Description": "Levetiracetam, USP is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (dark pink), and 1,000 mg (white) tablets for oral administration. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam tablets, USP contain the labeled amount of levetiracetam, USP. Inactive ingredients: copovidone, croscarmellose sodium, magnesium stearate, polyethylene glycol 3350, polysorbate 80, polyvinyl alcohol, pregelatinized starch, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue #2/Indigo Carmine Aluminum Lake. 500 mg tablets: Iron Oxide Yellow. 750 mg tablets: FD&C Red #40/Allura Red A C Aluminum Lake. Dissolution Method: Test 3."
    },
    {
      "NDCCode": "65162-844-16",
      "PackageDescription": "120 TABLET in 1 BOTTLE (65162-844-16) ",
      "NDC11Code": "65162-0844-16",
      "ProductNDC": "65162-844",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Capecitabine",
      "NonProprietaryName": "Capecitabine",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170310",
      "EndMarketingDate": "20240201",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204741",
      "LabelerName": "Amneal Pharmaceuticals LLC",
      "SubstanceName": "CAPECITABINE",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2024-02-02",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20170310",
      "EndMarketingDatePackage": "20240201",
      "SamplePackage": "N",
      "IndicationAndUsage": "Capecitabine tablets are a nucleoside metabolic inhibitor indicated for:. Colorectal Cancer : 1 adjuvant treatment of patients with Stage III colon cancer as a single agent or as a component of a combination chemotherapy regimen. (1.1) , 2 perioperative treatment of adults with locally advanced rectal cancer as a component of chemoradiotherapy. (1.1) , 3 treatment of patients with unresectable or metastatic colorectal cancer as a single agent or as a component of a combination chemotherapy regimen. (1.1) .",
      "Description": "Capecitabine, USP is a nucleoside metabolic inhibitor. The chemical name is 5’-deoxy-5-fluoro-N-­[(pentyloxy) carbonyl]-cytidine and has a molecular formula of C15H22FN3O6 and a molecular weight of 359.35. Capecitabine has the following structural formula. Capecitabine, USP is a white to off-white crystalline powder with an aqueous solubility of 26 mg/mL at 20ºC. Capecitabine tablets, USP are supplied as oblong, film-coated, biconvex unscored tablets for oral administration. Each light peach-colored tablet contains 150 mg capecitabine, USP and each peach-colored tablet contains 500 mg capecitabine, USP. The inactive ingredients in capecitabine tablets, USP include: anhydrous lactose, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose and purified water. The peach or light peach film-coating contains iron oxide red, iron oxide yellow, macrogol, polyvinyl alcohol, talc and titanium dioxide."
    },
    {
      "NDCCode": "0173-0859-10",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0859-10)  / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
      "NDC11Code": "00173-0859-10",
      "ProductNDC": "0173-0859",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breo Ellipta",
      "NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20130826",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA204275",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "100; 25",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-06",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20130826",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
      "Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0859-14",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0859-14)  / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
      "NDC11Code": "00173-0859-14",
      "ProductNDC": "0173-0859",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breo Ellipta",
      "NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20130826",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA204275",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "100; 25",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-06",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20130826",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
      "Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0859-61",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0859-61)  / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
      "NDC11Code": "00173-0859-61",
      "ProductNDC": "0173-0859",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breo Ellipta",
      "NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20130826",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA204275",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "100; 25",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2024-07-02",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20251231",
      "StartMarketingDatePackage": "20130826",
      "EndMarketingDatePackage": "20240630",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
      "Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0874-10",
      "PackageDescription": "1 INHALER in 1 CARTON (0173-0874-10)  / 30 POWDER in 1 INHALER",
      "NDC11Code": "00173-0874-10",
      "ProductNDC": "0173-0874",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Arnuity Ellipta",
      "NonProprietaryName": "Fluticasone Furoate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20140820",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA205625",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE",
      "StrengthNumber": "100",
      "StrengthUnit": "ug/1",
      "Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-08-05",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20140820",
      "SamplePackage": "N",
      "IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
      "Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0874-14",
      "PackageDescription": "1 INHALER in 1 CARTON (0173-0874-14)  / 14 POWDER in 1 INHALER",
      "NDC11Code": "00173-0874-14",
      "ProductNDC": "0173-0874",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Arnuity Ellipta",
      "NonProprietaryName": "Fluticasone Furoate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20140820",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA205625",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE",
      "StrengthNumber": "100",
      "StrengthUnit": "ug/1",
      "Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-08-05",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20140820",
      "SamplePackage": "N",
      "IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
      "Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0876-10",
      "PackageDescription": "1 INHALER in 1 CARTON (0173-0876-10)  / 30 POWDER in 1 INHALER",
      "NDC11Code": "00173-0876-10",
      "ProductNDC": "0173-0876",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Arnuity Ellipta",
      "NonProprietaryName": "Fluticasone Furoate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20140820",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA205625",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE",
      "StrengthNumber": "200",
      "StrengthUnit": "ug/1",
      "Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-08-05",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20140820",
      "SamplePackage": "N",
      "IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
      "Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0876-14",
      "PackageDescription": "1 INHALER in 1 CARTON (0173-0876-14)  / 14 POWDER in 1 INHALER",
      "NDC11Code": "00173-0876-14",
      "ProductNDC": "0173-0876",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Arnuity Ellipta",
      "NonProprietaryName": "Fluticasone Furoate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20140820",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA205625",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE",
      "StrengthNumber": "200",
      "StrengthUnit": "ug/1",
      "Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-08-05",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20140820",
      "SamplePackage": "N",
      "IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
      "Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0882-10",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0882-10)  / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
      "NDC11Code": "00173-0882-10",
      "ProductNDC": "0173-0882",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breo Ellipta",
      "NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20150430",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA204275",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "200; 25",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-06",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20150430",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
      "Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0882-14",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0882-14)  / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
      "NDC11Code": "00173-0882-14",
      "ProductNDC": "0173-0882",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breo Ellipta",
      "NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20150430",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA204275",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "200; 25",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-06",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20150430",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
      "Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0882-61",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0882-61)  / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
      "NDC11Code": "00173-0882-61",
      "ProductNDC": "0173-0882",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breo Ellipta",
      "NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20150430",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA204275",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "200; 25",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2024-06-07",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20241231",
      "StartMarketingDatePackage": "20150430",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
      "Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0887-10",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0887-10)  / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
      "NDC11Code": "00173-0887-10",
      "ProductNDC": "0173-0887",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Trelegy Ellipta",
      "NonProprietaryName": "Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20170918",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA209482",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; UMECLIDINIUM BROMIDE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "100; 62.5; 25",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-09-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170918",
      "SamplePackage": "N",
      "IndicationAndUsage": "TRELEGY ELLIPTA is a combination of fluticasone furoate, an inhaled corticosteroid (ICS); umeclidinium, an anticholinergic; and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 18 years and older. (1.2).",
      "Description": "TRELEGY ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS), umeclidinium (an anticholinergic), and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Umeclidinium bromide has the chemical name 1-[2-(benzyloxy)ethyl]-4-(hydroxydiphenylmethyl)-1-azoniabicyclo[2.2.2]octane bromide and the following chemical structure. Umeclidinium bromide is a white powder with a molecular weight of 508.5, and the empirical formula is C29H34NO2Br (as a quaternary ammonium bromide compound). It is slightly soluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. TRELEGY ELLIPTA is a light grey and beige plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (100 or 200 mcg) and lactose monohydrate (12.4 or 12.3 mg) and each blister on the other strip contains a white powder blend of micronized umeclidinium bromide (74.2 mcg equivalent to 62.5 mcg of umeclidinium), micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (75 mcg), and lactose monohydrate (12.3 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, TRELEGY ELLIPTA delivers 92 or 184 mcg of fluticasone furoate, 55 mcg of umeclidinium, and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. At flow rates of 30, 60, and 90 L/min for 4 seconds under in vitro test conditions, TRELEGY ELLIPTA delivers ≥90% of the target dose for each component. In adult subjects with very severe COPD (FEV1/FVC [forced vital capacity] <70% and FEV1 <30% predicted), mean peak inspiratory flow through the ELLIPTA inhaler was 65.8 L/min (range: 43.5 to 94.1 L/min). In adult subjects with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0887-14",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0887-14)  / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
      "NDC11Code": "00173-0887-14",
      "ProductNDC": "0173-0887",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Trelegy Ellipta",
      "NonProprietaryName": "Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20170918",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA209482",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; UMECLIDINIUM BROMIDE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "100; 62.5; 25",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-09-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170918",
      "SamplePackage": "N",
      "IndicationAndUsage": "TRELEGY ELLIPTA is a combination of fluticasone furoate, an inhaled corticosteroid (ICS); umeclidinium, an anticholinergic; and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 18 years and older. (1.2).",
      "Description": "TRELEGY ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS), umeclidinium (an anticholinergic), and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Umeclidinium bromide has the chemical name 1-[2-(benzyloxy)ethyl]-4-(hydroxydiphenylmethyl)-1-azoniabicyclo[2.2.2]octane bromide and the following chemical structure. Umeclidinium bromide is a white powder with a molecular weight of 508.5, and the empirical formula is C29H34NO2Br (as a quaternary ammonium bromide compound). It is slightly soluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. TRELEGY ELLIPTA is a light grey and beige plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (100 or 200 mcg) and lactose monohydrate (12.4 or 12.3 mg) and each blister on the other strip contains a white powder blend of micronized umeclidinium bromide (74.2 mcg equivalent to 62.5 mcg of umeclidinium), micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (75 mcg), and lactose monohydrate (12.3 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, TRELEGY ELLIPTA delivers 92 or 184 mcg of fluticasone furoate, 55 mcg of umeclidinium, and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. At flow rates of 30, 60, and 90 L/min for 4 seconds under in vitro test conditions, TRELEGY ELLIPTA delivers ≥90% of the target dose for each component. In adult subjects with very severe COPD (FEV1/FVC [forced vital capacity] <70% and FEV1 <30% predicted), mean peak inspiratory flow through the ELLIPTA inhaler was 65.8 L/min (range: 43.5 to 94.1 L/min). In adult subjects with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0887-61",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0887-61)  / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
      "NDC11Code": "00173-0887-61",
      "ProductNDC": "0173-0887",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Trelegy Ellipta",
      "NonProprietaryName": "Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20170918",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA209482",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; UMECLIDINIUM BROMIDE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "100; 62.5; 25",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-09-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170918",
      "SamplePackage": "Y",
      "IndicationAndUsage": "TRELEGY ELLIPTA is a combination of fluticasone furoate, an inhaled corticosteroid (ICS); umeclidinium, an anticholinergic; and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 18 years and older. (1.2).",
      "Description": "TRELEGY ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS), umeclidinium (an anticholinergic), and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Umeclidinium bromide has the chemical name 1-[2-(benzyloxy)ethyl]-4-(hydroxydiphenylmethyl)-1-azoniabicyclo[2.2.2]octane bromide and the following chemical structure. Umeclidinium bromide is a white powder with a molecular weight of 508.5, and the empirical formula is C29H34NO2Br (as a quaternary ammonium bromide compound). It is slightly soluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. TRELEGY ELLIPTA is a light grey and beige plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (100 or 200 mcg) and lactose monohydrate (12.4 or 12.3 mg) and each blister on the other strip contains a white powder blend of micronized umeclidinium bromide (74.2 mcg equivalent to 62.5 mcg of umeclidinium), micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (75 mcg), and lactose monohydrate (12.3 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, TRELEGY ELLIPTA delivers 92 or 184 mcg of fluticasone furoate, 55 mcg of umeclidinium, and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. At flow rates of 30, 60, and 90 L/min for 4 seconds under in vitro test conditions, TRELEGY ELLIPTA delivers ≥90% of the target dose for each component. In adult subjects with very severe COPD (FEV1/FVC [forced vital capacity] <70% and FEV1 <30% predicted), mean peak inspiratory flow through the ELLIPTA inhaler was 65.8 L/min (range: 43.5 to 94.1 L/min). In adult subjects with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0888-10",
      "PackageDescription": "1 INHALER in 1 CARTON (0173-0888-10)  / 30 POWDER in 1 INHALER",
      "NDC11Code": "00173-0888-10",
      "ProductNDC": "0173-0888",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Arnuity Ellipta",
      "NonProprietaryName": "Fluticasone Furoate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20180517",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA205625",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE",
      "StrengthNumber": "50",
      "StrengthUnit": "ug/1",
      "Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-08-05",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20180517",
      "SamplePackage": "N",
      "IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
      "Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0893-10",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0893-10)  / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
      "NDC11Code": "00173-0893-10",
      "ProductNDC": "0173-0893",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Trelegy Ellipta",
      "NonProprietaryName": "Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20200909",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA209482",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; UMECLIDINIUM BROMIDE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "200; 62.5; 25",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-09-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200909",
      "SamplePackage": "N",
      "IndicationAndUsage": "TRELEGY ELLIPTA is a combination of fluticasone furoate, an inhaled corticosteroid (ICS); umeclidinium, an anticholinergic; and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 18 years and older. (1.2).",
      "Description": "TRELEGY ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS), umeclidinium (an anticholinergic), and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Umeclidinium bromide has the chemical name 1-[2-(benzyloxy)ethyl]-4-(hydroxydiphenylmethyl)-1-azoniabicyclo[2.2.2]octane bromide and the following chemical structure. Umeclidinium bromide is a white powder with a molecular weight of 508.5, and the empirical formula is C29H34NO2Br (as a quaternary ammonium bromide compound). It is slightly soluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. TRELEGY ELLIPTA is a light grey and beige plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (100 or 200 mcg) and lactose monohydrate (12.4 or 12.3 mg) and each blister on the other strip contains a white powder blend of micronized umeclidinium bromide (74.2 mcg equivalent to 62.5 mcg of umeclidinium), micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (75 mcg), and lactose monohydrate (12.3 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, TRELEGY ELLIPTA delivers 92 or 184 mcg of fluticasone furoate, 55 mcg of umeclidinium, and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. At flow rates of 30, 60, and 90 L/min for 4 seconds under in vitro test conditions, TRELEGY ELLIPTA delivers ≥90% of the target dose for each component. In adult subjects with very severe COPD (FEV1/FVC [forced vital capacity] <70% and FEV1 <30% predicted), mean peak inspiratory flow through the ELLIPTA inhaler was 65.8 L/min (range: 43.5 to 94.1 L/min). In adult subjects with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0893-14",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0893-14)  / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
      "NDC11Code": "00173-0893-14",
      "ProductNDC": "0173-0893",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Trelegy Ellipta",
      "NonProprietaryName": "Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20200909",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA209482",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; UMECLIDINIUM BROMIDE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "200; 62.5; 25",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-09-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200909",
      "SamplePackage": "N",
      "IndicationAndUsage": "TRELEGY ELLIPTA is a combination of fluticasone furoate, an inhaled corticosteroid (ICS); umeclidinium, an anticholinergic; and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 18 years and older. (1.2).",
      "Description": "TRELEGY ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS), umeclidinium (an anticholinergic), and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Umeclidinium bromide has the chemical name 1-[2-(benzyloxy)ethyl]-4-(hydroxydiphenylmethyl)-1-azoniabicyclo[2.2.2]octane bromide and the following chemical structure. Umeclidinium bromide is a white powder with a molecular weight of 508.5, and the empirical formula is C29H34NO2Br (as a quaternary ammonium bromide compound). It is slightly soluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. TRELEGY ELLIPTA is a light grey and beige plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (100 or 200 mcg) and lactose monohydrate (12.4 or 12.3 mg) and each blister on the other strip contains a white powder blend of micronized umeclidinium bromide (74.2 mcg equivalent to 62.5 mcg of umeclidinium), micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (75 mcg), and lactose monohydrate (12.3 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, TRELEGY ELLIPTA delivers 92 or 184 mcg of fluticasone furoate, 55 mcg of umeclidinium, and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. At flow rates of 30, 60, and 90 L/min for 4 seconds under in vitro test conditions, TRELEGY ELLIPTA delivers ≥90% of the target dose for each component. In adult subjects with very severe COPD (FEV1/FVC [forced vital capacity] <70% and FEV1 <30% predicted), mean peak inspiratory flow through the ELLIPTA inhaler was 65.8 L/min (range: 43.5 to 94.1 L/min). In adult subjects with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0893-61",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0893-61)  / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
      "NDC11Code": "00173-0893-61",
      "ProductNDC": "0173-0893",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Trelegy Ellipta",
      "NonProprietaryName": "Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20200909",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA209482",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; UMECLIDINIUM BROMIDE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "200; 62.5; 25",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-09-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200909",
      "SamplePackage": "Y",
      "IndicationAndUsage": "TRELEGY ELLIPTA is a combination of fluticasone furoate, an inhaled corticosteroid (ICS); umeclidinium, an anticholinergic; and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 18 years and older. (1.2).",
      "Description": "TRELEGY ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS), umeclidinium (an anticholinergic), and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Umeclidinium bromide has the chemical name 1-[2-(benzyloxy)ethyl]-4-(hydroxydiphenylmethyl)-1-azoniabicyclo[2.2.2]octane bromide and the following chemical structure. Umeclidinium bromide is a white powder with a molecular weight of 508.5, and the empirical formula is C29H34NO2Br (as a quaternary ammonium bromide compound). It is slightly soluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. TRELEGY ELLIPTA is a light grey and beige plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (100 or 200 mcg) and lactose monohydrate (12.4 or 12.3 mg) and each blister on the other strip contains a white powder blend of micronized umeclidinium bromide (74.2 mcg equivalent to 62.5 mcg of umeclidinium), micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (75 mcg), and lactose monohydrate (12.3 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, TRELEGY ELLIPTA delivers 92 or 184 mcg of fluticasone furoate, 55 mcg of umeclidinium, and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. At flow rates of 30, 60, and 90 L/min for 4 seconds under in vitro test conditions, TRELEGY ELLIPTA delivers ≥90% of the target dose for each component. In adult subjects with very severe COPD (FEV1/FVC [forced vital capacity] <70% and FEV1 <30% predicted), mean peak inspiratory flow through the ELLIPTA inhaler was 65.8 L/min (range: 43.5 to 94.1 L/min). In adult subjects with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0173-0916-10",
      "PackageDescription": "1 TRAY in 1 CARTON (0173-0916-10)  / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
      "NDC11Code": "00173-0916-10",
      "ProductNDC": "0173-0916",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breo Ellipta",
      "NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20230512",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA204275",
      "LabelerName": "GlaxoSmithKline LLC",
      "SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
      "StrengthNumber": "50; 25",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-06",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20230512",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
      "Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0338-0122-04",
      "PackageDescription": "250 mL in 1 BAG (0338-0122-04) ",
      "NDC11Code": "00338-0122-04",
      "ProductNDC": "0338-0122",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVITREAL",
      "StartMarketingDate": "19581114",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA050671",
      "LabelerName": "Baxter Healthcare Corporation",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "1.25",
      "StrengthUnit": "g/250mL",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-06-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20240125",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
      "Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
    },
    {
      "NDCCode": "0338-0124-04",
      "PackageDescription": "300 mL in 1 BAG (0338-0124-04) ",
      "NDC11Code": "00338-0124-04",
      "ProductNDC": "0338-0124",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVITREAL",
      "StartMarketingDate": "19581114",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA050671",
      "LabelerName": "Baxter Healthcare Corporation",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "1.5",
      "StrengthUnit": "g/300mL",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-06-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20240125",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
      "Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
    },
    {
      "NDCCode": "0338-3551-48",
      "PackageDescription": "100 mL in 1 BAG (0338-3551-48) ",
      "NDC11Code": "00338-3551-48",
      "ProductNDC": "0338-3551",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "19581114",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA050671",
      "LabelerName": "Baxter Healthcare Corporation",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/100mL",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-06-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "19581114",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
      "Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
    },
    {
      "NDCCode": "0338-3552-48",
      "PackageDescription": "200 mL in 1 BAG (0338-3552-48) ",
      "NDC11Code": "00338-3552-48",
      "ProductNDC": "0338-3552",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "19581114",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA050671",
      "LabelerName": "Baxter Healthcare Corporation",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "1",
      "StrengthUnit": "g/200mL",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-06-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "19581114",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
      "Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
    }
  ]
}
                    

{"NDC":[{"NDCCode":"65162-538-16","ProprietaryName":"Levetiracetam","NonProprietaryName":"Levetiracetam"},{"NDCCode":"43353-538-16","ProprietaryName":"Bupropion Hydrochloride","NonProprietaryName":"Bupropion Hydrochloride"},{"NDCCode":"65841-538-16","ProprietaryName":"Potassium Citrate","NonProprietaryName":"Potassium Citrate"},{"NDCCode":"68382-538-16","ProprietaryName":"Potassium Citrate","NonProprietaryName":"Potassium Citrate"},{"NDCCode":"65162-034-16","ProprietaryName":"Omega-3-acid Ethyl Esters","NonProprietaryName":"Omega-3-acid Ethyl Esters"},{"NDCCode":"65162-528-16","ProprietaryName":"Levetiracetam","NonProprietaryName":"Levetiracetam"},{"NDCCode":"65162-529-16","ProprietaryName":"Levetiracetam","NonProprietaryName":"Levetiracetam"},{"NDCCode":"65162-844-16","ProprietaryName":"Capecitabine","NonProprietaryName":"Capecitabine"},{"NDCCode":"0173-0859-10","ProprietaryName":"Breo Ellipta","NonProprietaryName":"Fluticasone Furoate And Vilanterol Trifenatate"},{"NDCCode":"0173-0859-14","ProprietaryName":"Breo Ellipta","NonProprietaryName":"Fluticasone Furoate And Vilanterol Trifenatate"},{"NDCCode":"0173-0859-61","ProprietaryName":"Breo Ellipta","NonProprietaryName":"Fluticasone Furoate And Vilanterol Trifenatate"},{"NDCCode":"0173-0874-10","ProprietaryName":"Arnuity Ellipta","NonProprietaryName":"Fluticasone Furoate"},{"NDCCode":"0173-0874-14","ProprietaryName":"Arnuity Ellipta","NonProprietaryName":"Fluticasone Furoate"},{"NDCCode":"0173-0876-10","ProprietaryName":"Arnuity Ellipta","NonProprietaryName":"Fluticasone Furoate"},{"NDCCode":"0173-0876-14","ProprietaryName":"Arnuity Ellipta","NonProprietaryName":"Fluticasone Furoate"},{"NDCCode":"0173-0882-10","ProprietaryName":"Breo Ellipta","NonProprietaryName":"Fluticasone Furoate And Vilanterol Trifenatate"},{"NDCCode":"0173-0882-14","ProprietaryName":"Breo Ellipta","NonProprietaryName":"Fluticasone Furoate And Vilanterol Trifenatate"},{"NDCCode":"0173-0882-61","ProprietaryName":"Breo Ellipta","NonProprietaryName":"Fluticasone Furoate And Vilanterol Trifenatate"},{"NDCCode":"0173-0887-10","ProprietaryName":"Trelegy Ellipta","NonProprietaryName":"Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate"},{"NDCCode":"0173-0887-14","ProprietaryName":"Trelegy Ellipta","NonProprietaryName":"Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate"},{"NDCCode":"0173-0887-61","ProprietaryName":"Trelegy Ellipta","NonProprietaryName":"Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate"},{"NDCCode":"0173-0888-10","ProprietaryName":"Arnuity Ellipta","NonProprietaryName":"Fluticasone Furoate"},{"NDCCode":"0173-0893-10","ProprietaryName":"Trelegy Ellipta","NonProprietaryName":"Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate"},{"NDCCode":"0173-0893-14","ProprietaryName":"Trelegy Ellipta","NonProprietaryName":"Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate"},{"NDCCode":"0173-0893-61","ProprietaryName":"Trelegy Ellipta","NonProprietaryName":"Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate"},{"NDCCode":"0173-0916-10","ProprietaryName":"Breo Ellipta","NonProprietaryName":"Fluticasone Furoate And Vilanterol Trifenatate"},{"NDCCode":"0338-0122-04","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"0338-0124-04","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"0338-3551-48","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"0338-3552-48","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"}]}
                    

<NDCList><NDC><NDCCode>65162-538-16</NDCCode><ProprietaryName>Levetiracetam</ProprietaryName><NonProprietaryName>Levetiracetam</NonProprietaryName></NDC><NDC><NDCCode>43353-538-16</NDCCode><ProprietaryName>Bupropion Hydrochloride</ProprietaryName><NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>65841-538-16</NDCCode><ProprietaryName>Potassium Citrate</ProprietaryName><NonProprietaryName>Potassium Citrate</NonProprietaryName></NDC><NDC><NDCCode>68382-538-16</NDCCode><ProprietaryName>Potassium Citrate</ProprietaryName><NonProprietaryName>Potassium Citrate</NonProprietaryName></NDC><NDC><NDCCode>65162-034-16</NDCCode><ProprietaryName>Omega-3-acid Ethyl Esters</ProprietaryName><NonProprietaryName>Omega-3-acid Ethyl Esters</NonProprietaryName></NDC><NDC><NDCCode>65162-528-16</NDCCode><ProprietaryName>Levetiracetam</ProprietaryName><NonProprietaryName>Levetiracetam</NonProprietaryName></NDC><NDC><NDCCode>65162-529-16</NDCCode><ProprietaryName>Levetiracetam</ProprietaryName><NonProprietaryName>Levetiracetam</NonProprietaryName></NDC><NDC><NDCCode>65162-844-16</NDCCode><ProprietaryName>Capecitabine</ProprietaryName><NonProprietaryName>Capecitabine</NonProprietaryName></NDC><NDC><NDCCode>0173-0859-10</NDCCode><ProprietaryName>Breo Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0859-14</NDCCode><ProprietaryName>Breo Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0859-61</NDCCode><ProprietaryName>Breo Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0874-10</NDCCode><ProprietaryName>Arnuity Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate</NonProprietaryName></NDC><NDC><NDCCode>0173-0874-14</NDCCode><ProprietaryName>Arnuity Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate</NonProprietaryName></NDC><NDC><NDCCode>0173-0876-10</NDCCode><ProprietaryName>Arnuity Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate</NonProprietaryName></NDC><NDC><NDCCode>0173-0876-14</NDCCode><ProprietaryName>Arnuity Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate</NonProprietaryName></NDC><NDC><NDCCode>0173-0882-10</NDCCode><ProprietaryName>Breo Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0882-14</NDCCode><ProprietaryName>Breo Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0882-61</NDCCode><ProprietaryName>Breo Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0887-10</NDCCode><ProprietaryName>Trelegy Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0887-14</NDCCode><ProprietaryName>Trelegy Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0887-61</NDCCode><ProprietaryName>Trelegy Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0888-10</NDCCode><ProprietaryName>Arnuity Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate</NonProprietaryName></NDC><NDC><NDCCode>0173-0893-10</NDCCode><ProprietaryName>Trelegy Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0893-14</NDCCode><ProprietaryName>Trelegy Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0893-61</NDCCode><ProprietaryName>Trelegy Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate, Umeclidinium Bromide And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0173-0916-10</NDCCode><ProprietaryName>Breo Ellipta</ProprietaryName><NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName></NDC><NDC><NDCCode>0338-0122-04</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0338-0124-04</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0338-3551-48</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0338-3552-48</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC></NDCList>