{
"NDC": [
{
"NDCCode": "65162-849-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-849-03) ",
"NDC11Code": "65162-0849-03",
"ProductNDC": "65162-849",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204382",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230814",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.52 g/mol, and its structural formula is. Valsartan, USP is almost white, hygroscopic powder. It is practically insoluble in water, freely soluble in anhydrous ethanol and sparingly soluble in methylene chloride. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, n-butylamine, and in dimethyl formamide; sparingly soluble in methanol; and insoluble in ether, chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.74 g/mol, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan, USP and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, polyethylene glycol, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, talc and titanium dioxide. The 80 mg/12.5 mg tablets also contain FD&C Red No. 40 and ferrosoferric oxide. The 160 mg/12.5 mg tablets also contain iron oxide red. The 160 mg/25 mg tablets also contain iron oxide red and ferrosoferric oxide. The 320 mg/12.5 mg tablets also contain iron oxide red and ferrosoferric oxide."
},
{
"NDCCode": "65162-849-09",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (65162-849-09) ",
"NDC11Code": "65162-0849-09",
"ProductNDC": "65162-849",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204382",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230814",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.52 g/mol, and its structural formula is. Valsartan, USP is almost white, hygroscopic powder. It is practically insoluble in water, freely soluble in anhydrous ethanol and sparingly soluble in methylene chloride. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, n-butylamine, and in dimethyl formamide; sparingly soluble in methanol; and insoluble in ether, chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.74 g/mol, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan, USP and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, polyethylene glycol, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, talc and titanium dioxide. The 80 mg/12.5 mg tablets also contain FD&C Red No. 40 and ferrosoferric oxide. The 160 mg/12.5 mg tablets also contain iron oxide red. The 160 mg/25 mg tablets also contain iron oxide red and ferrosoferric oxide. The 320 mg/12.5 mg tablets also contain iron oxide red and ferrosoferric oxide."
},
{
"NDCCode": "65162-849-11",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (65162-849-11) ",
"NDC11Code": "65162-0849-11",
"ProductNDC": "65162-849",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204382",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230814",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.52 g/mol, and its structural formula is. Valsartan, USP is almost white, hygroscopic powder. It is practically insoluble in water, freely soluble in anhydrous ethanol and sparingly soluble in methylene chloride. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, n-butylamine, and in dimethyl formamide; sparingly soluble in methanol; and insoluble in ether, chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.74 g/mol, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan, USP and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, polyethylene glycol, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, talc and titanium dioxide. The 80 mg/12.5 mg tablets also contain FD&C Red No. 40 and ferrosoferric oxide. The 160 mg/12.5 mg tablets also contain iron oxide red. The 160 mg/25 mg tablets also contain iron oxide red and ferrosoferric oxide. The 320 mg/12.5 mg tablets also contain iron oxide red and ferrosoferric oxide."
},
{
"NDCCode": "65162-849-50",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (65162-849-50) ",
"NDC11Code": "65162-0849-50",
"ProductNDC": "65162-849",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204382",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230814",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.52 g/mol, and its structural formula is. Valsartan, USP is almost white, hygroscopic powder. It is practically insoluble in water, freely soluble in anhydrous ethanol and sparingly soluble in methylene chloride. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, n-butylamine, and in dimethyl formamide; sparingly soluble in methanol; and insoluble in ether, chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.74 g/mol, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan, USP and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, polyethylene glycol, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, talc and titanium dioxide. The 80 mg/12.5 mg tablets also contain FD&C Red No. 40 and ferrosoferric oxide. The 160 mg/12.5 mg tablets also contain iron oxide red. The 160 mg/25 mg tablets also contain iron oxide red and ferrosoferric oxide. The 320 mg/12.5 mg tablets also contain iron oxide red and ferrosoferric oxide."
},
{
"NDCCode": "14593-849-03",
"PackageDescription": "50 kg in 1 DRUM (14593-849-03) ",
"NDC11Code": "14593-0849-03",
"ProductNDC": "14593-849",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Dolasetron Mesylate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20231225",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Emcure Pharmaceuticals Limited",
"SubstanceName": "DOLASETRON MESYLATE",
"StrengthNumber": "5",
"StrengthUnit": "kg/5kg",
"Status": "Unfinished",
"LastUpdate": "2025-11-28",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "25-DEC-23"
},
{
"NDCCode": "16714-849-03",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (16714-849-03) ",
"NDC11Code": "16714-0849-03",
"ProductNDC": "16714-849",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clomipramine Hydrochloride",
"NonProprietaryName": "Clomipramine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208961",
"LabelerName": "Northstar Rx LLC.",
"SubstanceName": "CLOMIPRAMINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2022-11-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180827",
"SamplePackage": "N",
"IndicationAndUsage": "Clomipramine hydrochloride capsules, USP are indicated for the treatment of obsessions and compulsions in patients with Obsessive-Compulsive Disorder (OCD). The obsessions or compulsions must cause marked distress, be time-consuming, or significantly interfere with social or occupational functioning, in order to meet the DSM-III-R (circa 1,989) diagnosis of OCD. Obsessions are recurrent, persistent ideas, thoughts, images, or impulses that are ego dystonic. Compulsions are repetitive, purposeful, and intentional behaviors performed in response to an obsession or in a stereotyped fashion, and are recognized by the person as excessive or unreasonable. The effectiveness of clomipramine hydrochloride for the treatment of OCD was demonstrated in multicenter, placebo-controlled, parallel-group studies, including two 10-week studies in adults and one 8-week study in children and adolescents 10 to 17 years of age. Patients in all studies had moderate-to-severe OCD (DSM-III), with mean baseline ratings on the Yale-Brown Obsessive Compulsive Scale (YBOCS) ranging from 26 to 28 and a mean baseline rating of 10 on the NIMH Clinical Global Obsessive Compulsive Scale (NIMH-OC). Patients taking CMI experienced a mean reduction of approximately 10 on the YBOCS, representing an average improvement on this scale of 35% to 42% among adults and 37% among children and adolescents. CMI-treated patients experienced a 3.5 unit decrement on the NIMH-OC. Patients on placebo showed no important clinical response on either scale. The maximum dose was 250 mg/day for most adults and 3 mg/kg/day (up to 200 mg) for all children and adolescents. The effectiveness of clomipramine hydrochloride for long-term use (i.e., for more than 10 weeks) has not been systematically evaluated in placebo-controlled trials. The physician who elects to use clomipramine hydrochloride for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).",
"Description": "Clomipramine hydrochloride capsules, USP are an antiobsessional drug that belongs to the class (dibenzazepine) of pharmacologic agents known as tricyclic antidepressants. Clomipramine hydrochloride is available as capsules of 25, 50, and 75 mg for oral administration. Clomipramine hydrochloride, USP is 3-chloro-5-[3-(dimethylamino) propyl]-10, 11-dihydro 5H-dibenz[b,f ] azepine monohydrochloride, and its structural formula is. Molecular Formula = C19H23ClN2.HCl. Molecular Weight = 351.31. Clomipramine hydrochloride, USP is a white or slightly yellow, crystalline powder, slightly hygroscopic. It is very soluble in water. Each capsule contains clomipramine hydrochloride USP, 25 mg or 50 mg or 75 mg and inactive ingredients: colloidal silicon dioxide, microcrystalline cellulose, magnesium stearate and pregelatinized starch. Additionally, hard gelatin capsule shell contains: D&C red 33, D&C yellow 10 (25 mg), D&C red 28 (25 mg and 75 mg), FD&C red 40, FD&C blue 1(25.mg and 75 mg), gelatin, iron oxide yellow (50 mg), sodium lauryl sulfate, titanium dioxide and water. Each capsule is imprinted with black pharmaceutical ink which contains ammonia solution, butyl alcohol, dehydrated alcohol, ferrosoferric oxide, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water and shellac. The Product meets USP Dissolution Test # 2."
},
{
"NDCCode": "46007-849-03",
"PackageDescription": "90 mL in 1 TUBE (46007-849-03) ",
"NDC11Code": "46007-0849-03",
"ProductNDC": "46007-849",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Skinsuit Tm 3 In 1 Moisturizer Spf 50",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250826",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Skin Authority LLC",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "175",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Active",
"LastUpdate": "2025-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250826",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn. higher SPF gives more sunburn protection. retains SPF after 80 minutes of swimming or sweating . If used as directed with other sun protection measures ( see Directions), decreases the risk of skin cancer and early skin aging caused by sun ."
},
{
"NDCCode": "63545-849-03",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (63545-849-03) ",
"NDC11Code": "63545-0849-03",
"ProductNDC": "63545-849",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aluminium Fluoratum",
"NonProprietaryName": "Aluminium Fluoratum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200124",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, Inc.",
"SubstanceName": "ALUMINUM FLUORIDE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2020-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200124",
"SamplePackage": "N"
},
{
"NDCCode": "64679-849-03",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (64679-849-03) ",
"NDC11Code": "64679-0849-03",
"ProductNDC": "64679-849",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203699",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-11-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210226",
"SamplePackage": "N"
},
{
"NDCCode": "71358-849-03",
"PackageDescription": "208198 mL in 1 DRUM (71358-849-03)",
"NDC11Code": "71358-0849-03",
"ProductNDC": "71358-849",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Dimethicone",
"DosageFormName": "CREAM",
"StartMarketingDate": "20170601",
"MarketingCategoryName": "EXPORT ONLY",
"LabelerName": "McCord Research",
"SubstanceName": "DIMETHICONE 100",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20221231"
},
{
"NDCCode": "84756-849-03",
"PackageDescription": "30 mL in 1 BOTTLE (84756-849-03) ",
"NDC11Code": "84756-0849-03",
"ProductNDC": "84756-849",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Trstay Bala",
"NonProprietaryName": "Trstay Bala",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241213",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Yiwu Luoxin E Commerce Co Ltd",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241213",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "65162-001-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-001-03) ",
"NDC11Code": "65162-0001-03",
"ProductNDC": "65162-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prasugrel",
"NonProprietaryName": "Prasugrel",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205913",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "PRASUGREL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180622",
"SamplePackage": "N",
"Description": "Prasugrel tablets, USP contain prasugrel, a thienopyridine class inhibitor of platelet activation and aggregation mediated by the P2Y12 ADP receptor. Prasugrel tablets, USP are formulated as the hydrochloride salt, a racemate, which is chemically designated as 5-[(1RS)-2-cyclopropyl-1-(2-fluorophenyl)-2-oxoethyl]-4,5,6,7-tetrahydrothieno[3,2-c]pyridin-2-yl acetate hydrochloride. Prasugrel hydrochloride has the molecular formula C20H20FNO3SHCl representing a molecular weight of 409.90. The chemical structure of prasugrel hydrochloride is. Prasugrel hydrochloride, USP is a white to practically white solid. It is soluble at pH 2, slightly soluble at pH 3 to 4, and practically insoluble at pH 6 to 7.5. It also dissolves freely in methanol and is slightly soluble in 1- and 2-propanol and acetone. It is practically insoluble in diethyl ether and ethyl acetate. Prasugrel tablets, USP are available for oral administration as 5 mg or 10 mg oval shaped, film-coated, non-scored tablets, debossed on one side and plain on the other side. Each tan 5 mg tablet is manufactured with 5.49 mg prasugrel hydrochloride USP, equivalent to 5 mg prasugrel and each tan 10 mg tablet with 10.98 mg prasugrel hydrochloride USP, equivalent to 10 mg of prasugrel. Other ingredients include diethyl phthalate, ethyl cellulose, ferrosoferric oxide, glyceryl behenate, hydrochloric acid, hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, mannitol, microcrystalline cellulose, sucrose stearate, talc and titanium dioxide."
},
{
"NDCCode": "65162-002-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-002-03) ",
"NDC11Code": "65162-0002-03",
"ProductNDC": "65162-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prasugrel",
"NonProprietaryName": "Prasugrel",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205913",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "PRASUGREL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180622",
"SamplePackage": "N",
"Description": "Prasugrel tablets, USP contain prasugrel, a thienopyridine class inhibitor of platelet activation and aggregation mediated by the P2Y12 ADP receptor. Prasugrel tablets, USP are formulated as the hydrochloride salt, a racemate, which is chemically designated as 5-[(1RS)-2-cyclopropyl-1-(2-fluorophenyl)-2-oxoethyl]-4,5,6,7-tetrahydrothieno[3,2-c]pyridin-2-yl acetate hydrochloride. Prasugrel hydrochloride has the molecular formula C20H20FNO3SHCl representing a molecular weight of 409.90. The chemical structure of prasugrel hydrochloride is. Prasugrel hydrochloride, USP is a white to practically white solid. It is soluble at pH 2, slightly soluble at pH 3 to 4, and practically insoluble at pH 6 to 7.5. It also dissolves freely in methanol and is slightly soluble in 1- and 2-propanol and acetone. It is practically insoluble in diethyl ether and ethyl acetate. Prasugrel tablets, USP are available for oral administration as 5 mg or 10 mg oval shaped, film-coated, non-scored tablets, debossed on one side and plain on the other side. Each tan 5 mg tablet is manufactured with 5.49 mg prasugrel hydrochloride USP, equivalent to 5 mg prasugrel and each tan 10 mg tablet with 10.98 mg prasugrel hydrochloride USP, equivalent to 10 mg of prasugrel. Other ingredients include diethyl phthalate, ethyl cellulose, ferrosoferric oxide, glyceryl behenate, hydrochloric acid, hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, mannitol, microcrystalline cellulose, sucrose stearate, talc and titanium dioxide."
},
{
"NDCCode": "65162-006-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (65162-006-03) ",
"NDC11Code": "65162-0006-03",
"ProductNDC": "65162-006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078477",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100621",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate tablets are a calcium channel blocker and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: : 1 Hypertension (1.1) .",
"Description": "Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S, and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "65162-007-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (65162-007-03) ",
"NDC11Code": "65162-0007-03",
"ProductNDC": "65162-007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078477",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100621",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate tablets are a calcium channel blocker and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: : 1 Hypertension (1.1) .",
"Description": "Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S, and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "65162-008-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (65162-008-03) ",
"NDC11Code": "65162-0008-03",
"ProductNDC": "65162-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078477",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100621",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate tablets are a calcium channel blocker and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: : 1 Hypertension (1.1) .",
"Description": "Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S, and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "65162-019-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-019-03) ",
"NDC11Code": "65162-0019-03",
"ProductNDC": "65162-019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Escitalopram Oxalate",
"NonProprietaryName": "Escitalopram Oxalate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170517",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205619",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ESCITALOPRAM OXALATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170517",
"SamplePackage": "N",
"IndicationAndUsage": "Escitalopram tablets are indicated for the treatment of: 1 major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older. .",
"Description": "Escitalopram tablet contains escitalopram oxalate is a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. The molecular formula is C20H21FN2O C2H2O4 and the molecular weight is 414.40. Escitalopram oxalate, USP occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate and insoluble in heptane. Escitalopram tablets, USP are film-coated, round tablets containing 6.387 mg, 12.774 mg, 25.549 mg escitalopram oxalate, USP in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: butylated hydroxyanisole, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, silicon dioxide and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "65162-020-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-020-03) ",
"NDC11Code": "65162-0020-03",
"ProductNDC": "65162-020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Escitalopram Oxalate",
"NonProprietaryName": "Escitalopram Oxalate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170517",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205619",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ESCITALOPRAM OXALATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170517",
"SamplePackage": "N",
"IndicationAndUsage": "Escitalopram tablets are indicated for the treatment of: 1 major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older. .",
"Description": "Escitalopram tablet contains escitalopram oxalate is a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. The molecular formula is C20H21FN2O C2H2O4 and the molecular weight is 414.40. Escitalopram oxalate, USP occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate and insoluble in heptane. Escitalopram tablets, USP are film-coated, round tablets containing 6.387 mg, 12.774 mg, 25.549 mg escitalopram oxalate, USP in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: butylated hydroxyanisole, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, silicon dioxide and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "65162-021-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-021-03) ",
"NDC11Code": "65162-0021-03",
"ProductNDC": "65162-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Escitalopram Oxalate",
"NonProprietaryName": "Escitalopram Oxalate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170517",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205619",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ESCITALOPRAM OXALATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170517",
"SamplePackage": "N",
"IndicationAndUsage": "Escitalopram tablets are indicated for the treatment of: 1 major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older. .",
"Description": "Escitalopram tablet contains escitalopram oxalate is a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. The molecular formula is C20H21FN2O C2H2O4 and the molecular weight is 414.40. Escitalopram oxalate, USP occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate and insoluble in heptane. Escitalopram tablets, USP are film-coated, round tablets containing 6.387 mg, 12.774 mg, 25.549 mg escitalopram oxalate, USP in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: butylated hydroxyanisole, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, silicon dioxide and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "65162-029-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-029-03) ",
"NDC11Code": "65162-0029-03",
"ProductNDC": "65162-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pitavastatin",
"NonProprietaryName": "Pitavastatin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240821",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205961",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "PITAVASTATIN CALCIUM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240821",
"SamplePackage": "N",
"IndicationAndUsage": "Pitavastatin tablets are indicated as an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: : 1 Adults with primary hyperlipidemia. , 2 Adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). .",
"Description": "Pitavastatin tablets for oral use is an HMG-CoA reductase inhibitor. The chemical name for pitavastatin is (+)monocalcium bis{(3R,5S,6E)-7-[2-cyclopropyl-4-(4-fluorophenyl)quinolin-3-yl]-3,5-dihydroxyhept-6-enoate} pentahydrate. The structural formula is. The molecular formula for pitavastatin is C50H46CaF2N2O8 ∙5H2O and the molecular weight is 971.06 g/mol. Pitavastatin is odorless and occurs as white to off-white powder. It is freely soluble in tetrahydrofuran, soluble in ethylene glycol, sparingly soluble in dimethyl sulphoxide and in 50 % aqueous acetonitrile, slightly soluble in methanol, very slightly soluble in water and in ethanol (96%), and insoluble in diethyl ether. Pitavastatin is hygroscopic and slightly unstable in light. Each film-coated tablet of pitavastatin contains 1 mg, 2 mg, or 4 mg of pitavastatin, which is equivalent to 1.045 mg, 2.09 mg, or 4.18 mg, respectively, of pitavastatin calcium and the following inactive ingredients: hypromellose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium aluminometasilicate, and magnesium stearate. The film-coating contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, titanium dioxide, and triethyl citrate."
},
{
"NDCCode": "65162-030-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-030-03) ",
"NDC11Code": "65162-0030-03",
"ProductNDC": "65162-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pitavastatin",
"NonProprietaryName": "Pitavastatin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240821",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205961",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "PITAVASTATIN CALCIUM",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240821",
"SamplePackage": "N",
"IndicationAndUsage": "Pitavastatin tablets are indicated as an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: : 1 Adults with primary hyperlipidemia. , 2 Adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). .",
"Description": "Pitavastatin tablets for oral use is an HMG-CoA reductase inhibitor. The chemical name for pitavastatin is (+)monocalcium bis{(3R,5S,6E)-7-[2-cyclopropyl-4-(4-fluorophenyl)quinolin-3-yl]-3,5-dihydroxyhept-6-enoate} pentahydrate. The structural formula is. The molecular formula for pitavastatin is C50H46CaF2N2O8 ∙5H2O and the molecular weight is 971.06 g/mol. Pitavastatin is odorless and occurs as white to off-white powder. It is freely soluble in tetrahydrofuran, soluble in ethylene glycol, sparingly soluble in dimethyl sulphoxide and in 50 % aqueous acetonitrile, slightly soluble in methanol, very slightly soluble in water and in ethanol (96%), and insoluble in diethyl ether. Pitavastatin is hygroscopic and slightly unstable in light. Each film-coated tablet of pitavastatin contains 1 mg, 2 mg, or 4 mg of pitavastatin, which is equivalent to 1.045 mg, 2.09 mg, or 4.18 mg, respectively, of pitavastatin calcium and the following inactive ingredients: hypromellose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium aluminometasilicate, and magnesium stearate. The film-coating contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, titanium dioxide, and triethyl citrate."
},
{
"NDCCode": "65162-031-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-031-03) ",
"NDC11Code": "65162-0031-03",
"ProductNDC": "65162-031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pitavastatin",
"NonProprietaryName": "Pitavastatin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240821",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205961",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "PITAVASTATIN CALCIUM",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240821",
"SamplePackage": "N",
"IndicationAndUsage": "Pitavastatin tablets are indicated as an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: : 1 Adults with primary hyperlipidemia. , 2 Adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). .",
"Description": "Pitavastatin tablets for oral use is an HMG-CoA reductase inhibitor. The chemical name for pitavastatin is (+)monocalcium bis{(3R,5S,6E)-7-[2-cyclopropyl-4-(4-fluorophenyl)quinolin-3-yl]-3,5-dihydroxyhept-6-enoate} pentahydrate. The structural formula is. The molecular formula for pitavastatin is C50H46CaF2N2O8 ∙5H2O and the molecular weight is 971.06 g/mol. Pitavastatin is odorless and occurs as white to off-white powder. It is freely soluble in tetrahydrofuran, soluble in ethylene glycol, sparingly soluble in dimethyl sulphoxide and in 50 % aqueous acetonitrile, slightly soluble in methanol, very slightly soluble in water and in ethanol (96%), and insoluble in diethyl ether. Pitavastatin is hygroscopic and slightly unstable in light. Each film-coated tablet of pitavastatin contains 1 mg, 2 mg, or 4 mg of pitavastatin, which is equivalent to 1.045 mg, 2.09 mg, or 4.18 mg, respectively, of pitavastatin calcium and the following inactive ingredients: hypromellose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium aluminometasilicate, and magnesium stearate. The film-coating contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, titanium dioxide, and triethyl citrate."
},
{
"NDCCode": "65162-036-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (65162-036-03) / 30 TABLET, EXTENDED RELEASE in 1 BOTTLE",
"NDC11Code": "65162-0036-03",
"ProductNDC": "65162-036",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Guaifenesin",
"NonProprietaryName": "Guaifenesin",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207342",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "GUAIFENESIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]",
"Status": "Active",
"LastUpdate": "2024-10-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180727",
"SamplePackage": "N",
"IndicationAndUsage": "helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive."
},
{
"NDCCode": "65162-037-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (65162-037-03) / 30 TABLET, EXTENDED RELEASE in 1 BOTTLE",
"NDC11Code": "65162-0037-03",
"ProductNDC": "65162-037",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Guaifenesin",
"NonProprietaryName": "Guaifenesin",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207342",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "GUAIFENESIN",
"StrengthNumber": "1200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]",
"Status": "Active",
"LastUpdate": "2024-10-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180727",
"SamplePackage": "N",
"IndicationAndUsage": "helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive."
},
{
"NDCCode": "65162-038-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (65162-038-03) / 30 TABLET, EXTENDED RELEASE in 1 BOTTLE",
"NDC11Code": "65162-0038-03",
"ProductNDC": "65162-038",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Guaifenesin And Dextromethorphan Hbr",
"NonProprietaryName": "Guaifenesin And Dextromethorphan Hbr",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20181101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209692",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "GUAIFENESIN; DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "600; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive. temporarily relieves:cough due to minor throat and bronchial irritation as may occur with the common cold or inhaled irritantsthe intensity of coughingthe impulse to cough to help you get to sleep ."
},
{
"NDCCode": "65162-039-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (65162-039-03) / 30 TABLET, EXTENDED RELEASE in 1 BOTTLE",
"NDC11Code": "65162-0039-03",
"ProductNDC": "65162-039",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Guaifenesin And Dextromethorphan Hbr",
"NonProprietaryName": "Guaifenesin And Dextromethorphan Hbr",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20181101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209692",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "GUAIFENESIN; DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "1200; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive. temporarily relieves:cough due to minor throat and bronchial irritation as may occur with the common cold or inhaled irritantsthe intensity of coughingthe impulse to cough to help you get to sleep ."
},
{
"NDCCode": "65162-042-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-042-03) ",
"NDC11Code": "65162-0042-03",
"ProductNDC": "65162-042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eletriptan Hydrobromide",
"NonProprietaryName": "Eletriptan Hydrobromide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180530",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206787",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ELETRIPTAN HYDROBROMIDE MONOHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180602",
"SamplePackage": "N",
"IndicationAndUsage": "Eletriptan hydrobromide tablets are indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: 1 Use only if a clear diagnosis of migraine has been established. If a patient has no response to the first migraine attack treated with eletriptan hydrobromide tablets, reconsider the diagnosis of migraine before eletriptan hydrobromide tablets are administered to treat any subsequent attacks. , 2 Eletriptan hydrobromide tablets are not intended for the prevention of migraine attacks. , 3 Safety and effectiveness of eletriptan hydrobromide tablets have not been established for cluster headache.",
"Description": "Eletriptan hydrobromide tablets contain eletriptan hydrobromide monohydrate, which is a selective 5-hydroxytryptamine 1B/1D (5-HT1B/1D) receptor agonist. Eletriptan hydrobromide monohydrate is chemically designated as3-(((R)-1-Methyl Pyrrolidin-2yl)methyl)-5-(2-phenylsulphonyl) ethyl)-1H-indole hydrobromide monohydrate and it has the following chemical structure. The molecular formula is C22H26N2O2S.HBr.H2O, representing a molecular weight of 481.45 g/mol. Eletriptan hydrobromide monohydrate is an off-white to light brown color powder and freely soluble in methanol. Each eletriptan hydrobromide tablet for oral administration contains 25.17 or 50.34 mg of eletriptan hydrobromide monohydrate equivalent to 20 mg or 40 mg of eletriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, FD&C blue #2 aluminum lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide and triacetin. Additionally 20 mg tablets contains FD&C yellow #5 aluminum lake and 40 mg tablet contains D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake."
},
{
"NDCCode": "65162-043-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-043-03) ",
"NDC11Code": "65162-0043-03",
"ProductNDC": "65162-043",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eletriptan Hydrobromide",
"NonProprietaryName": "Eletriptan Hydrobromide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180530",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206787",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ELETRIPTAN HYDROBROMIDE MONOHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180602",
"SamplePackage": "N",
"IndicationAndUsage": "Eletriptan hydrobromide tablets are indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: 1 Use only if a clear diagnosis of migraine has been established. If a patient has no response to the first migraine attack treated with eletriptan hydrobromide tablets, reconsider the diagnosis of migraine before eletriptan hydrobromide tablets are administered to treat any subsequent attacks. , 2 Eletriptan hydrobromide tablets are not intended for the prevention of migraine attacks. , 3 Safety and effectiveness of eletriptan hydrobromide tablets have not been established for cluster headache.",
"Description": "Eletriptan hydrobromide tablets contain eletriptan hydrobromide monohydrate, which is a selective 5-hydroxytryptamine 1B/1D (5-HT1B/1D) receptor agonist. Eletriptan hydrobromide monohydrate is chemically designated as3-(((R)-1-Methyl Pyrrolidin-2yl)methyl)-5-(2-phenylsulphonyl) ethyl)-1H-indole hydrobromide monohydrate and it has the following chemical structure. The molecular formula is C22H26N2O2S.HBr.H2O, representing a molecular weight of 481.45 g/mol. Eletriptan hydrobromide monohydrate is an off-white to light brown color powder and freely soluble in methanol. Each eletriptan hydrobromide tablet for oral administration contains 25.17 or 50.34 mg of eletriptan hydrobromide monohydrate equivalent to 20 mg or 40 mg of eletriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, FD&C blue #2 aluminum lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide and triacetin. Additionally 20 mg tablets contains FD&C yellow #5 aluminum lake and 40 mg tablet contains D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake."
},
{
"NDCCode": "65162-045-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (65162-045-03) / 30 TABLET in 1 BOTTLE",
"NDC11Code": "65162-0045-03",
"ProductNDC": "65162-045",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cetirizine Hydrochloride",
"NonProprietaryName": "Cetirizine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078780",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100121",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies. ● runny nose. ● sneezing. ● itchy, watery eyes. ● itching of the nose or throat."
},
{
"NDCCode": "65162-046-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (65162-046-03) / 30 TABLET in 1 BOTTLE",
"NDC11Code": "65162-0046-03",
"ProductNDC": "65162-046",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cetirizine Hydrochloride",
"NonProprietaryName": "Cetirizine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078780",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100121",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies. ● runny nose. ● sneezing. ● itchy, watery eyes. ● itching of the nose or throat."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>65162-849-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-849-03) </PackageDescription>
<NDC11Code>65162-0849-03</NDC11Code>
<ProductNDC>65162-849</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204382</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.52 g/mol, and its structural formula is. Valsartan, USP is almost white, hygroscopic powder. It is practically insoluble in water, freely soluble in anhydrous ethanol and sparingly soluble in methylene chloride. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, n-butylamine, and in dimethyl formamide; sparingly soluble in methanol; and insoluble in ether, chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.74 g/mol, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan, USP and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, polyethylene glycol, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, talc and titanium dioxide. The 80 mg/12.5 mg tablets also contain FD&C Red No. 40 and ferrosoferric oxide. The 160 mg/12.5 mg tablets also contain iron oxide red. The 160 mg/25 mg tablets also contain iron oxide red and ferrosoferric oxide. The 320 mg/12.5 mg tablets also contain iron oxide red and ferrosoferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>65162-849-09</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (65162-849-09) </PackageDescription>
<NDC11Code>65162-0849-09</NDC11Code>
<ProductNDC>65162-849</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204382</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.52 g/mol, and its structural formula is. Valsartan, USP is almost white, hygroscopic powder. It is practically insoluble in water, freely soluble in anhydrous ethanol and sparingly soluble in methylene chloride. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, n-butylamine, and in dimethyl formamide; sparingly soluble in methanol; and insoluble in ether, chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.74 g/mol, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan, USP and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, polyethylene glycol, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, talc and titanium dioxide. The 80 mg/12.5 mg tablets also contain FD&C Red No. 40 and ferrosoferric oxide. The 160 mg/12.5 mg tablets also contain iron oxide red. The 160 mg/25 mg tablets also contain iron oxide red and ferrosoferric oxide. The 320 mg/12.5 mg tablets also contain iron oxide red and ferrosoferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>65162-849-11</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (65162-849-11) </PackageDescription>
<NDC11Code>65162-0849-11</NDC11Code>
<ProductNDC>65162-849</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204382</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.52 g/mol, and its structural formula is. Valsartan, USP is almost white, hygroscopic powder. It is practically insoluble in water, freely soluble in anhydrous ethanol and sparingly soluble in methylene chloride. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, n-butylamine, and in dimethyl formamide; sparingly soluble in methanol; and insoluble in ether, chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.74 g/mol, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan, USP and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, polyethylene glycol, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, talc and titanium dioxide. The 80 mg/12.5 mg tablets also contain FD&C Red No. 40 and ferrosoferric oxide. The 160 mg/12.5 mg tablets also contain iron oxide red. The 160 mg/25 mg tablets also contain iron oxide red and ferrosoferric oxide. The 320 mg/12.5 mg tablets also contain iron oxide red and ferrosoferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>65162-849-50</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (65162-849-50) </PackageDescription>
<NDC11Code>65162-0849-50</NDC11Code>
<ProductNDC>65162-849</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204382</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.52 g/mol, and its structural formula is. Valsartan, USP is almost white, hygroscopic powder. It is practically insoluble in water, freely soluble in anhydrous ethanol and sparingly soluble in methylene chloride. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, n-butylamine, and in dimethyl formamide; sparingly soluble in methanol; and insoluble in ether, chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.74 g/mol, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan, USP and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, polyethylene glycol, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, talc and titanium dioxide. The 80 mg/12.5 mg tablets also contain FD&C Red No. 40 and ferrosoferric oxide. The 160 mg/12.5 mg tablets also contain iron oxide red. The 160 mg/25 mg tablets also contain iron oxide red and ferrosoferric oxide. The 320 mg/12.5 mg tablets also contain iron oxide red and ferrosoferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>14593-849-03</NDCCode>
<PackageDescription>50 kg in 1 DRUM (14593-849-03) </PackageDescription>
<NDC11Code>14593-0849-03</NDC11Code>
<ProductNDC>14593-849</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Dolasetron Mesylate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20231225</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Emcure Pharmaceuticals Limited</LabelerName>
<SubstanceName>DOLASETRON MESYLATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>kg/5kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-11-28</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>25-DEC-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>16714-849-03</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (16714-849-03) </PackageDescription>
<NDC11Code>16714-0849-03</NDC11Code>
<ProductNDC>16714-849</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clomipramine Hydrochloride</ProprietaryName>
<NonProprietaryName>Clomipramine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208961</ApplicationNumber>
<LabelerName>Northstar Rx LLC.</LabelerName>
<SubstanceName>CLOMIPRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clomipramine hydrochloride capsules, USP are indicated for the treatment of obsessions and compulsions in patients with Obsessive-Compulsive Disorder (OCD). The obsessions or compulsions must cause marked distress, be time-consuming, or significantly interfere with social or occupational functioning, in order to meet the DSM-III-R (circa 1,989) diagnosis of OCD. Obsessions are recurrent, persistent ideas, thoughts, images, or impulses that are ego dystonic. Compulsions are repetitive, purposeful, and intentional behaviors performed in response to an obsession or in a stereotyped fashion, and are recognized by the person as excessive or unreasonable. The effectiveness of clomipramine hydrochloride for the treatment of OCD was demonstrated in multicenter, placebo-controlled, parallel-group studies, including two 10-week studies in adults and one 8-week study in children and adolescents 10 to 17 years of age. Patients in all studies had moderate-to-severe OCD (DSM-III), with mean baseline ratings on the Yale-Brown Obsessive Compulsive Scale (YBOCS) ranging from 26 to 28 and a mean baseline rating of 10 on the NIMH Clinical Global Obsessive Compulsive Scale (NIMH-OC). Patients taking CMI experienced a mean reduction of approximately 10 on the YBOCS, representing an average improvement on this scale of 35% to 42% among adults and 37% among children and adolescents. CMI-treated patients experienced a 3.5 unit decrement on the NIMH-OC. Patients on placebo showed no important clinical response on either scale. The maximum dose was 250 mg/day for most adults and 3 mg/kg/day (up to 200 mg) for all children and adolescents. The effectiveness of clomipramine hydrochloride for long-term use (i.e., for more than 10 weeks) has not been systematically evaluated in placebo-controlled trials. The physician who elects to use clomipramine hydrochloride for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Clomipramine hydrochloride capsules, USP are an antiobsessional drug that belongs to the class (dibenzazepine) of pharmacologic agents known as tricyclic antidepressants. Clomipramine hydrochloride is available as capsules of 25, 50, and 75 mg for oral administration. Clomipramine hydrochloride, USP is 3-chloro-5-[3-(dimethylamino) propyl]-10, 11-dihydro 5H-dibenz[b,f ] azepine monohydrochloride, and its structural formula is. Molecular Formula = C19H23ClN2.HCl. Molecular Weight = 351.31. Clomipramine hydrochloride, USP is a white or slightly yellow, crystalline powder, slightly hygroscopic. It is very soluble in water. Each capsule contains clomipramine hydrochloride USP, 25 mg or 50 mg or 75 mg and inactive ingredients: colloidal silicon dioxide, microcrystalline cellulose, magnesium stearate and pregelatinized starch. Additionally, hard gelatin capsule shell contains: D&C red 33, D&C yellow 10 (25 mg), D&C red 28 (25 mg and 75 mg), FD&C red 40, FD&C blue 1(25.mg and 75 mg), gelatin, iron oxide yellow (50 mg), sodium lauryl sulfate, titanium dioxide and water. Each capsule is imprinted with black pharmaceutical ink which contains ammonia solution, butyl alcohol, dehydrated alcohol, ferrosoferric oxide, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water and shellac. The Product meets USP Dissolution Test # 2.</Description>
</NDC>
<NDC>
<NDCCode>46007-849-03</NDCCode>
<PackageDescription>90 mL in 1 TUBE (46007-849-03) </PackageDescription>
<NDC11Code>46007-0849-03</NDC11Code>
<ProductNDC>46007-849</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Skinsuit Tm 3 In 1 Moisturizer Spf 50</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250826</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Skin Authority LLC</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>175</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn. higher SPF gives more sunburn protection. retains SPF after 80 minutes of swimming or sweating . If used as directed with other sun protection measures ( see Directions), decreases the risk of skin cancer and early skin aging caused by sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63545-849-03</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (63545-849-03) </PackageDescription>
<NDC11Code>63545-0849-03</NDC11Code>
<ProductNDC>63545-849</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aluminium Fluoratum</ProprietaryName>
<NonProprietaryName>Aluminium Fluoratum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200124</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, Inc.</LabelerName>
<SubstanceName>ALUMINUM FLUORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64679-849-03</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (64679-849-03) </PackageDescription>
<NDC11Code>64679-0849-03</NDC11Code>
<ProductNDC>64679-849</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203699</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-11-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71358-849-03</NDCCode>
<PackageDescription>208198 mL in 1 DRUM (71358-849-03)</PackageDescription>
<NDC11Code>71358-0849-03</NDC11Code>
<ProductNDC>71358-849</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Dimethicone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<StartMarketingDate>20170601</StartMarketingDate>
<MarketingCategoryName>EXPORT ONLY</MarketingCategoryName>
<LabelerName>McCord Research</LabelerName>
<SubstanceName>DIMETHICONE 100</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>84756-849-03</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE (84756-849-03) </PackageDescription>
<NDC11Code>84756-0849-03</NDC11Code>
<ProductNDC>84756-849</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Trstay Bala</ProprietaryName>
<NonProprietaryName>Trstay Bala</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241213</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Yiwu Luoxin E Commerce Co Ltd</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65162-001-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-001-03) </PackageDescription>
<NDC11Code>65162-0001-03</NDC11Code>
<ProductNDC>65162-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prasugrel</ProprietaryName>
<NonProprietaryName>Prasugrel</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205913</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>PRASUGREL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Prasugrel tablets, USP contain prasugrel, a thienopyridine class inhibitor of platelet activation and aggregation mediated by the P2Y12 ADP receptor. Prasugrel tablets, USP are formulated as the hydrochloride salt, a racemate, which is chemically designated as 5-[(1RS)-2-cyclopropyl-1-(2-fluorophenyl)-2-oxoethyl]-4,5,6,7-tetrahydrothieno[3,2-c]pyridin-2-yl acetate hydrochloride. Prasugrel hydrochloride has the molecular formula C20H20FNO3SHCl representing a molecular weight of 409.90. The chemical structure of prasugrel hydrochloride is. Prasugrel hydrochloride, USP is a white to practically white solid. It is soluble at pH 2, slightly soluble at pH 3 to 4, and practically insoluble at pH 6 to 7.5. It also dissolves freely in methanol and is slightly soluble in 1- and 2-propanol and acetone. It is practically insoluble in diethyl ether and ethyl acetate. Prasugrel tablets, USP are available for oral administration as 5 mg or 10 mg oval shaped, film-coated, non-scored tablets, debossed on one side and plain on the other side. Each tan 5 mg tablet is manufactured with 5.49 mg prasugrel hydrochloride USP, equivalent to 5 mg prasugrel and each tan 10 mg tablet with 10.98 mg prasugrel hydrochloride USP, equivalent to 10 mg of prasugrel. Other ingredients include diethyl phthalate, ethyl cellulose, ferrosoferric oxide, glyceryl behenate, hydrochloric acid, hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, mannitol, microcrystalline cellulose, sucrose stearate, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>65162-002-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-002-03) </PackageDescription>
<NDC11Code>65162-0002-03</NDC11Code>
<ProductNDC>65162-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prasugrel</ProprietaryName>
<NonProprietaryName>Prasugrel</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205913</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>PRASUGREL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Prasugrel tablets, USP contain prasugrel, a thienopyridine class inhibitor of platelet activation and aggregation mediated by the P2Y12 ADP receptor. Prasugrel tablets, USP are formulated as the hydrochloride salt, a racemate, which is chemically designated as 5-[(1RS)-2-cyclopropyl-1-(2-fluorophenyl)-2-oxoethyl]-4,5,6,7-tetrahydrothieno[3,2-c]pyridin-2-yl acetate hydrochloride. Prasugrel hydrochloride has the molecular formula C20H20FNO3SHCl representing a molecular weight of 409.90. The chemical structure of prasugrel hydrochloride is. Prasugrel hydrochloride, USP is a white to practically white solid. It is soluble at pH 2, slightly soluble at pH 3 to 4, and practically insoluble at pH 6 to 7.5. It also dissolves freely in methanol and is slightly soluble in 1- and 2-propanol and acetone. It is practically insoluble in diethyl ether and ethyl acetate. Prasugrel tablets, USP are available for oral administration as 5 mg or 10 mg oval shaped, film-coated, non-scored tablets, debossed on one side and plain on the other side. Each tan 5 mg tablet is manufactured with 5.49 mg prasugrel hydrochloride USP, equivalent to 5 mg prasugrel and each tan 10 mg tablet with 10.98 mg prasugrel hydrochloride USP, equivalent to 10 mg of prasugrel. Other ingredients include diethyl phthalate, ethyl cellulose, ferrosoferric oxide, glyceryl behenate, hydrochloric acid, hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, mannitol, microcrystalline cellulose, sucrose stearate, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>65162-006-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (65162-006-03) </PackageDescription>
<NDC11Code>65162-0006-03</NDC11Code>
<ProductNDC>65162-006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078477</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate tablets are a calcium channel blocker and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: : 1 Hypertension (1.1) .</IndicationAndUsage>
<Description>Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S, and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>65162-007-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (65162-007-03) </PackageDescription>
<NDC11Code>65162-0007-03</NDC11Code>
<ProductNDC>65162-007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078477</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate tablets are a calcium channel blocker and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: : 1 Hypertension (1.1) .</IndicationAndUsage>
<Description>Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S, and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>65162-008-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (65162-008-03) </PackageDescription>
<NDC11Code>65162-0008-03</NDC11Code>
<ProductNDC>65162-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078477</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate tablets are a calcium channel blocker and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: : 1 Hypertension (1.1) .</IndicationAndUsage>
<Description>Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S, and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>65162-019-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-019-03) </PackageDescription>
<NDC11Code>65162-0019-03</NDC11Code>
<ProductNDC>65162-019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Escitalopram Oxalate</ProprietaryName>
<NonProprietaryName>Escitalopram Oxalate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170517</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205619</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ESCITALOPRAM OXALATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Escitalopram tablets are indicated for the treatment of: 1 major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older. .</IndicationAndUsage>
<Description>Escitalopram tablet contains escitalopram oxalate is a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. The molecular formula is C20H21FN2O C2H2O4 and the molecular weight is 414.40. Escitalopram oxalate, USP occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate and insoluble in heptane. Escitalopram tablets, USP are film-coated, round tablets containing 6.387 mg, 12.774 mg, 25.549 mg escitalopram oxalate, USP in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: butylated hydroxyanisole, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, silicon dioxide and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>65162-020-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-020-03) </PackageDescription>
<NDC11Code>65162-0020-03</NDC11Code>
<ProductNDC>65162-020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Escitalopram Oxalate</ProprietaryName>
<NonProprietaryName>Escitalopram Oxalate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170517</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205619</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ESCITALOPRAM OXALATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Escitalopram tablets are indicated for the treatment of: 1 major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older. .</IndicationAndUsage>
<Description>Escitalopram tablet contains escitalopram oxalate is a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. The molecular formula is C20H21FN2O C2H2O4 and the molecular weight is 414.40. Escitalopram oxalate, USP occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate and insoluble in heptane. Escitalopram tablets, USP are film-coated, round tablets containing 6.387 mg, 12.774 mg, 25.549 mg escitalopram oxalate, USP in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: butylated hydroxyanisole, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, silicon dioxide and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>65162-021-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-021-03) </PackageDescription>
<NDC11Code>65162-0021-03</NDC11Code>
<ProductNDC>65162-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Escitalopram Oxalate</ProprietaryName>
<NonProprietaryName>Escitalopram Oxalate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170517</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205619</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ESCITALOPRAM OXALATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Escitalopram tablets are indicated for the treatment of: 1 major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older. .</IndicationAndUsage>
<Description>Escitalopram tablet contains escitalopram oxalate is a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. The molecular formula is C20H21FN2O C2H2O4 and the molecular weight is 414.40. Escitalopram oxalate, USP occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate and insoluble in heptane. Escitalopram tablets, USP are film-coated, round tablets containing 6.387 mg, 12.774 mg, 25.549 mg escitalopram oxalate, USP in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: butylated hydroxyanisole, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, silicon dioxide and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>65162-029-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-029-03) </PackageDescription>
<NDC11Code>65162-0029-03</NDC11Code>
<ProductNDC>65162-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pitavastatin</ProprietaryName>
<NonProprietaryName>Pitavastatin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240821</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205961</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>PITAVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pitavastatin tablets are indicated as an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: : 1 Adults with primary hyperlipidemia. , 2 Adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). .</IndicationAndUsage>
<Description>Pitavastatin tablets for oral use is an HMG-CoA reductase inhibitor. The chemical name for pitavastatin is (+)monocalcium bis{(3R,5S,6E)-7-[2-cyclopropyl-4-(4-fluorophenyl)quinolin-3-yl]-3,5-dihydroxyhept-6-enoate} pentahydrate. The structural formula is. The molecular formula for pitavastatin is C50H46CaF2N2O8 ∙5H2O and the molecular weight is 971.06 g/mol. Pitavastatin is odorless and occurs as white to off-white powder. It is freely soluble in tetrahydrofuran, soluble in ethylene glycol, sparingly soluble in dimethyl sulphoxide and in 50 % aqueous acetonitrile, slightly soluble in methanol, very slightly soluble in water and in ethanol (96%), and insoluble in diethyl ether. Pitavastatin is hygroscopic and slightly unstable in light. Each film-coated tablet of pitavastatin contains 1 mg, 2 mg, or 4 mg of pitavastatin, which is equivalent to 1.045 mg, 2.09 mg, or 4.18 mg, respectively, of pitavastatin calcium and the following inactive ingredients: hypromellose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium aluminometasilicate, and magnesium stearate. The film-coating contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, titanium dioxide, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>65162-030-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-030-03) </PackageDescription>
<NDC11Code>65162-0030-03</NDC11Code>
<ProductNDC>65162-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pitavastatin</ProprietaryName>
<NonProprietaryName>Pitavastatin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240821</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205961</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>PITAVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pitavastatin tablets are indicated as an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: : 1 Adults with primary hyperlipidemia. , 2 Adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). .</IndicationAndUsage>
<Description>Pitavastatin tablets for oral use is an HMG-CoA reductase inhibitor. The chemical name for pitavastatin is (+)monocalcium bis{(3R,5S,6E)-7-[2-cyclopropyl-4-(4-fluorophenyl)quinolin-3-yl]-3,5-dihydroxyhept-6-enoate} pentahydrate. The structural formula is. The molecular formula for pitavastatin is C50H46CaF2N2O8 ∙5H2O and the molecular weight is 971.06 g/mol. Pitavastatin is odorless and occurs as white to off-white powder. It is freely soluble in tetrahydrofuran, soluble in ethylene glycol, sparingly soluble in dimethyl sulphoxide and in 50 % aqueous acetonitrile, slightly soluble in methanol, very slightly soluble in water and in ethanol (96%), and insoluble in diethyl ether. Pitavastatin is hygroscopic and slightly unstable in light. Each film-coated tablet of pitavastatin contains 1 mg, 2 mg, or 4 mg of pitavastatin, which is equivalent to 1.045 mg, 2.09 mg, or 4.18 mg, respectively, of pitavastatin calcium and the following inactive ingredients: hypromellose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium aluminometasilicate, and magnesium stearate. The film-coating contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, titanium dioxide, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>65162-031-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-031-03) </PackageDescription>
<NDC11Code>65162-0031-03</NDC11Code>
<ProductNDC>65162-031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pitavastatin</ProprietaryName>
<NonProprietaryName>Pitavastatin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240821</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205961</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>PITAVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pitavastatin tablets are indicated as an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: : 1 Adults with primary hyperlipidemia. , 2 Adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). .</IndicationAndUsage>
<Description>Pitavastatin tablets for oral use is an HMG-CoA reductase inhibitor. The chemical name for pitavastatin is (+)monocalcium bis{(3R,5S,6E)-7-[2-cyclopropyl-4-(4-fluorophenyl)quinolin-3-yl]-3,5-dihydroxyhept-6-enoate} pentahydrate. The structural formula is. The molecular formula for pitavastatin is C50H46CaF2N2O8 ∙5H2O and the molecular weight is 971.06 g/mol. Pitavastatin is odorless and occurs as white to off-white powder. It is freely soluble in tetrahydrofuran, soluble in ethylene glycol, sparingly soluble in dimethyl sulphoxide and in 50 % aqueous acetonitrile, slightly soluble in methanol, very slightly soluble in water and in ethanol (96%), and insoluble in diethyl ether. Pitavastatin is hygroscopic and slightly unstable in light. Each film-coated tablet of pitavastatin contains 1 mg, 2 mg, or 4 mg of pitavastatin, which is equivalent to 1.045 mg, 2.09 mg, or 4.18 mg, respectively, of pitavastatin calcium and the following inactive ingredients: hypromellose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium aluminometasilicate, and magnesium stearate. The film-coating contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, titanium dioxide, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>65162-036-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (65162-036-03) / 30 TABLET, EXTENDED RELEASE in 1 BOTTLE</PackageDescription>
<NDC11Code>65162-0036-03</NDC11Code>
<ProductNDC>65162-036</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Guaifenesin</ProprietaryName>
<NonProprietaryName>Guaifenesin</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207342</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>GUAIFENESIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65162-037-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (65162-037-03) / 30 TABLET, EXTENDED RELEASE in 1 BOTTLE</PackageDescription>
<NDC11Code>65162-0037-03</NDC11Code>
<ProductNDC>65162-037</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Guaifenesin</ProprietaryName>
<NonProprietaryName>Guaifenesin</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207342</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>GUAIFENESIN</SubstanceName>
<StrengthNumber>1200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65162-038-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (65162-038-03) / 30 TABLET, EXTENDED RELEASE in 1 BOTTLE</PackageDescription>
<NDC11Code>65162-0038-03</NDC11Code>
<ProductNDC>65162-038</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Guaifenesin And Dextromethorphan Hbr</ProprietaryName>
<NonProprietaryName>Guaifenesin And Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209692</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>GUAIFENESIN; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>600; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive. temporarily relieves:cough due to minor throat and bronchial irritation as may occur with the common cold or inhaled irritantsthe intensity of coughingthe impulse to cough to help you get to sleep .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65162-039-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (65162-039-03) / 30 TABLET, EXTENDED RELEASE in 1 BOTTLE</PackageDescription>
<NDC11Code>65162-0039-03</NDC11Code>
<ProductNDC>65162-039</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Guaifenesin And Dextromethorphan Hbr</ProprietaryName>
<NonProprietaryName>Guaifenesin And Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209692</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>GUAIFENESIN; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>1200; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive. temporarily relieves:cough due to minor throat and bronchial irritation as may occur with the common cold or inhaled irritantsthe intensity of coughingthe impulse to cough to help you get to sleep .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65162-042-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-042-03) </PackageDescription>
<NDC11Code>65162-0042-03</NDC11Code>
<ProductNDC>65162-042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eletriptan Hydrobromide</ProprietaryName>
<NonProprietaryName>Eletriptan Hydrobromide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180530</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206787</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ELETRIPTAN HYDROBROMIDE MONOHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eletriptan hydrobromide tablets are indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: 1 Use only if a clear diagnosis of migraine has been established. If a patient has no response to the first migraine attack treated with eletriptan hydrobromide tablets, reconsider the diagnosis of migraine before eletriptan hydrobromide tablets are administered to treat any subsequent attacks. , 2 Eletriptan hydrobromide tablets are not intended for the prevention of migraine attacks. , 3 Safety and effectiveness of eletriptan hydrobromide tablets have not been established for cluster headache.</IndicationAndUsage>
<Description>Eletriptan hydrobromide tablets contain eletriptan hydrobromide monohydrate, which is a selective 5-hydroxytryptamine 1B/1D (5-HT1B/1D) receptor agonist. Eletriptan hydrobromide monohydrate is chemically designated as3-(((R)-1-Methyl Pyrrolidin-2yl)methyl)-5-(2-phenylsulphonyl) ethyl)-1H-indole hydrobromide monohydrate and it has the following chemical structure. The molecular formula is C22H26N2O2S.HBr.H2O, representing a molecular weight of 481.45 g/mol. Eletriptan hydrobromide monohydrate is an off-white to light brown color powder and freely soluble in methanol. Each eletriptan hydrobromide tablet for oral administration contains 25.17 or 50.34 mg of eletriptan hydrobromide monohydrate equivalent to 20 mg or 40 mg of eletriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, FD&C blue #2 aluminum lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide and triacetin. Additionally 20 mg tablets contains FD&C yellow #5 aluminum lake and 40 mg tablet contains D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>65162-043-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-043-03) </PackageDescription>
<NDC11Code>65162-0043-03</NDC11Code>
<ProductNDC>65162-043</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eletriptan Hydrobromide</ProprietaryName>
<NonProprietaryName>Eletriptan Hydrobromide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180530</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206787</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ELETRIPTAN HYDROBROMIDE MONOHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eletriptan hydrobromide tablets are indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: 1 Use only if a clear diagnosis of migraine has been established. If a patient has no response to the first migraine attack treated with eletriptan hydrobromide tablets, reconsider the diagnosis of migraine before eletriptan hydrobromide tablets are administered to treat any subsequent attacks. , 2 Eletriptan hydrobromide tablets are not intended for the prevention of migraine attacks. , 3 Safety and effectiveness of eletriptan hydrobromide tablets have not been established for cluster headache.</IndicationAndUsage>
<Description>Eletriptan hydrobromide tablets contain eletriptan hydrobromide monohydrate, which is a selective 5-hydroxytryptamine 1B/1D (5-HT1B/1D) receptor agonist. Eletriptan hydrobromide monohydrate is chemically designated as3-(((R)-1-Methyl Pyrrolidin-2yl)methyl)-5-(2-phenylsulphonyl) ethyl)-1H-indole hydrobromide monohydrate and it has the following chemical structure. The molecular formula is C22H26N2O2S.HBr.H2O, representing a molecular weight of 481.45 g/mol. Eletriptan hydrobromide monohydrate is an off-white to light brown color powder and freely soluble in methanol. Each eletriptan hydrobromide tablet for oral administration contains 25.17 or 50.34 mg of eletriptan hydrobromide monohydrate equivalent to 20 mg or 40 mg of eletriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, FD&C blue #2 aluminum lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide and triacetin. Additionally 20 mg tablets contains FD&C yellow #5 aluminum lake and 40 mg tablet contains D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>65162-045-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (65162-045-03) / 30 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>65162-0045-03</NDC11Code>
<ProductNDC>65162-045</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cetirizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cetirizine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078780</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies. ● runny nose. ● sneezing. ● itchy, watery eyes. ● itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65162-046-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (65162-046-03) / 30 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>65162-0046-03</NDC11Code>
<ProductNDC>65162-046</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cetirizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cetirizine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078780</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies. ● runny nose. ● sneezing. ● itchy, watery eyes. ● itching of the nose or throat.</IndicationAndUsage>
</NDC>
</NDCList>