RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>65219-256-28</NDCCode>
    <PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (65219-256-28)  / 180 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
    <NDC11Code>65219-0256-28</NDC11Code>
    <ProductNDC>65219-256</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
    <NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20171116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203720</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
    <StrengthNumber>36; 4.5</StrengthNumber>
    <StrengthUnit>g/180mL; g/180mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171116</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .</IndicationAndUsage>
    <Description>Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass bottles. The product does not contain excipients or preservatives. Each piperacillin and tazobactam for injection, USP 40.5 g pharmacy bulk package bottle contains piperacillin sodium equivalent to 36 grams of piperacillin and tazobactam sodium equivalent to 4.5 g of tazobactam sufficient for delivery of multiple doses. Meets USP Organic Impurities, Procedure 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-554-28</NDCCode>
    <PackageDescription>2 KIT in 1 CARTON (65219-554-28)  / 1 KIT in 1 KIT *  .8 mL in 1 SYRINGE, GLASS (65219-574-04)  *  1 SWAB in 1 POUCH (65219-332-95) </PackageDescription>
    <NDC11Code>65219-0554-28</NDC11Code>
    <ProductNDC>65219-554</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idacio</ProprietaryName>
    <NonProprietaryName>Adalimumab-aacf</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230701</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761255</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2026-02-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IDACIO is a tumor necrosis factor (TNF) blocker indicated for: : 1 Rheumatoid Arthritis (RA) (1.1): reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA. , 2 Juvenile Idiopathic Arthritis (JIA) (1.2): reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older. , 3 Psoriatic Arthritis (PsA) (1.3): reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA. , 4 Ankylosing Spondylitis (AS) (1.4): reducing signs and symptoms in adult patients with active AS. , 5 Crohn's Disease (CD) (1.5): treatment of moderately to severely active Crohn's disease in adults and pediatric patients 6 years of age and older. , 6 Ulcerative Colitis (UC) (1.6): treatment of moderately to severely active ulcerative colitis in adult patients. , 7 Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 8 Plaque Psoriasis (Ps) (1.7): treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. , 9 Hidradenitis Suppurativa (HS) (1.8): treatment of moderate to severe hidradenitis suppurativa in adult patients. , 10 Uveitis (UV) (1.9): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. .</IndicationAndUsage>
    <Description>Adalimumab-aacf is a tumor necrosis factor blocker. Adalimumab-aacf is a recombinant human IgG1 monoclonal antibody created using phage display technology resulting in an antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-aacf is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. IDACIO (adalimumab-aacf) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled pen (IDACIO Pen), as a single-dose, 1 mL or prefilled glass syringe or as a single dose institutional use vial kit. Enclosed within the pen is a single-dose, 1 mL prefilled glass syringe. The solution of IDACIO is clear and colorless to pale yellow, with a pH of about 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled pen, or institutional use vial kit delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of IDACIO contains adalimumab-aacf (40 mg) and glacial acetic acid (0.5 mg), trehalose (54.8 mg), polysorbate 80 (0.8 mg), sodium chloride (2.3 mg), and Water for Injection. Sodium hydroxide is added to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>55289-256-28</NDCCode>
    <PackageDescription>28 CAPSULE in 1 BOTTLE, PLASTIC (55289-256-28)</PackageDescription>
    <NDC11Code>55289-0256-28</NDC11Code>
    <ProductNDC>55289-256</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100323</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA060704</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2014-09-05</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>65219-256-00</NDCCode>
    <PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (65219-256-00)  / 180 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
    <NDC11Code>65219-0256-00</NDC11Code>
    <ProductNDC>65219-256</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
    <NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20171116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203720</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
    <StrengthNumber>36; 4.5</StrengthNumber>
    <StrengthUnit>g/180mL; g/180mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171116</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .</IndicationAndUsage>
    <Description>Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass bottles. The product does not contain excipients or preservatives. Each piperacillin and tazobactam for injection, USP 40.5 g pharmacy bulk package bottle contains piperacillin sodium equivalent to 36 grams of piperacillin and tazobactam sodium equivalent to 4.5 g of tazobactam sufficient for delivery of multiple doses. Meets USP Organic Impurities, Procedure 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-256-24</NDCCode>
    <PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (65219-256-24)  / 180 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
    <NDC11Code>65219-0256-24</NDC11Code>
    <ProductNDC>65219-256</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
    <NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20171116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203720</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
    <StrengthNumber>36; 4.5</StrengthNumber>
    <StrengthUnit>g/180mL; g/180mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171116</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .</IndicationAndUsage>
    <Description>Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass bottles. The product does not contain excipients or preservatives. Each piperacillin and tazobactam for injection, USP 40.5 g pharmacy bulk package bottle contains piperacillin sodium equivalent to 36 grams of piperacillin and tazobactam sodium equivalent to 4.5 g of tazobactam sufficient for delivery of multiple doses. Meets USP Organic Impurities, Procedure 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-014-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (65219-014-10)  &gt; 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (65219-014-01) </PackageDescription>
    <NDC11Code>65219-0014-10</NDC11Code>
    <ProductNDC>65219-014</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20191030</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062719</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191030</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria ( Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl) amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-016-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (65219-016-10)  &gt; 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (65219-016-01) </PackageDescription>
    <NDC11Code>65219-0016-10</NDC11Code>
    <ProductNDC>65219-016</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062719</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria ( Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl) amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-018-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (65219-018-10)  &gt; 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (65219-018-01) </PackageDescription>
    <NDC11Code>65219-0018-10</NDC11Code>
    <ProductNDC>65219-018</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20200113</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062719</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria ( Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl) amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-020-23</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (65219-020-23)  &gt; 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (65219-020-03) </PackageDescription>
    <NDC11Code>65219-0020-23</NDC11Code>
    <ProductNDC>65219-020</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20191031</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062797</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191031</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria ( Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl) amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-027-50</NDCCode>
    <PackageDescription>25 VIAL, GLASS in 1 TRAY (65219-027-50)  / 50 mL in 1 VIAL, GLASS (65219-027-05) </PackageDescription>
    <NDC11Code>65219-0027-50</NDC11Code>
    <ProductNDC>65219-027</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ascorbic Acid</ProprietaryName>
    <NonProprietaryName>Ascorbic Acid</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20251208</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217131</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ASCORBIC ACID</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Ascorbic Acid [CS], Vitamin C [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251208</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ascorbic acid injection is indicated for the short term (up to 1 week) treatment of scurvy in adult and pediatric patients, age 5 months and older, for whom oral administration is not possible, insufficient or contraindicated.  Limitations of Use.  Ascorbic acid injection is not indicated for the treatment of vitamin C deficiency that is not associated with signs and symptoms of scurvy.</IndicationAndUsage>
    <Description>Ascorbic acid injection, USP for intravenous use is a colorless to pale yellow, preservative-free, hypertonic, sterile, non-pyrogenic solution of ascorbic acid. Ascorbic acid injection must be diluted with an appropriate infusion solution (e.g., 5% Dextrose Injection, USP; Sterile Water for Injection, USP) [see Dosage and Administration (2.1)]. The chemical name of ascorbic acid, USP is L-ascorbic acid. The molecular formula is C6H8O6. It has the following structural formula. Each ascorbic acid injection, USP, 50 mL, Pharmacy Bulk Package vial that contains 25,000 mg ascorbic acid, equivalent to 28,125 mg sodium ascorbate. Each mL of ascorbic acid injection, USP contains 500 mg of ascorbic acid (equivalent to 562.5 mg of sodium ascorbate which amounts to 65 mg sodium/mL of ascorbic acid injection), 130 mg of sodium bicarbonate 0.28 mg of edetate disodium (dihydrate). Sodium hydroxide is added for pH adjustment (pH range 5.6 to 6.6). It contains no bacteriostatic or antimicrobial agent.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-027-55</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (65219-027-55)  / 50 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>65219-0027-55</NDC11Code>
    <ProductNDC>65219-027</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ascorbic Acid</ProprietaryName>
    <NonProprietaryName>Ascorbic Acid</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20251208</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217131</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ASCORBIC ACID</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Ascorbic Acid [CS], Vitamin C [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251208</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ascorbic acid injection is indicated for the short term (up to 1 week) treatment of scurvy in adult and pediatric patients, age 5 months and older, for whom oral administration is not possible, insufficient or contraindicated.  Limitations of Use.  Ascorbic acid injection is not indicated for the treatment of vitamin C deficiency that is not associated with signs and symptoms of scurvy.</IndicationAndUsage>
    <Description>Ascorbic acid injection, USP for intravenous use is a colorless to pale yellow, preservative-free, hypertonic, sterile, non-pyrogenic solution of ascorbic acid. Ascorbic acid injection must be diluted with an appropriate infusion solution (e.g., 5% Dextrose Injection, USP; Sterile Water for Injection, USP) [see Dosage and Administration (2.1)]. The chemical name of ascorbic acid, USP is L-ascorbic acid. The molecular formula is C6H8O6. It has the following structural formula. Each ascorbic acid injection, USP, 50 mL, Pharmacy Bulk Package vial that contains 25,000 mg ascorbic acid, equivalent to 28,125 mg sodium ascorbate. Each mL of ascorbic acid injection, USP contains 500 mg of ascorbic acid (equivalent to 562.5 mg of sodium ascorbate which amounts to 65 mg sodium/mL of ascorbic acid injection), 130 mg of sodium bicarbonate 0.28 mg of edetate disodium (dihydrate). Sodium hydroxide is added for pH adjustment (pH range 5.6 to 6.6). It contains no bacteriostatic or antimicrobial agent.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-088-50</NDCCode>
    <PackageDescription>6 CARTON in 1 BOX (65219-088-50)  / 1 VIAL in 1 CARTON (65219-088-06)  / 100 mL in 1 VIAL</PackageDescription>
    <NDC11Code>65219-0088-50</NDC11Code>
    <ProductNDC>65219-088</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gadoterate Meglumine</ProprietaryName>
    <NonProprietaryName>Gadoterate Meglumine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220620</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215982</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GADOTERATE MEGLUMINE</SubstanceName>
    <StrengthNumber>376.9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220620</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gadoterate Meglumine Injection is a gadolinium-based contrast agent indicated for intravenous use with magnetic resonance imaging (MRI) in brain (intracranial), spine and associated tissues in adult and pediatric patients (including term neonates) to detect and visualize areas with disruption of the blood brain barrier (BBB) and/or abnormal vascularity.</IndicationAndUsage>
    <Description>Gadoterate Meglumine Injection, USP is a paramagnetic macrocyclic ionic contrast agent administered for magnetic resonance imaging. The chemical name for gadoterate meglumine is D-glucitol, 1-deoxy-1-(methylamino)-,[1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraaceto(4-)-.kappa.N1, .kappa.N4, .kappa.N7, .kappa.N10, .kappa.O1, .kappa.O4, .kappa.O7, .kappa.O10]gadolinate(1-)(1:1); it has a formula weight of 753.9 g/mol and empirical formula of C23H42O13N5Gd (anhydrous basis). The structural formula of gadoterate meglumine in solution is as follows. CAS Registry No. 92943-93-6. Gadoterate Meglumine Injection, USP is a sterile, nonpyrogenic, clear, colorless to yellow, aqueous solution of 0.5 mmol per mL of gadoterate meglumine. No preservative is added. Each mL of Gadoterate Meglumine Injection, USP contains 376.9 mg of gadoterate meglumine, 0.25 mg of DOTA and water for injection. Gadoterate Meglumine Injection, USP has a pH of 6.5 to 8.0. The main physiochemical properties of Gadoterate Meglumine Injection, USP are provided below. The thermodynamic stability constants for gadoterate (log Ktherm and log Kcond at pH 7.4) are 25.6 and 19.3, respectively.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-200-05</NDCCode>
    <PackageDescription>1 KIT in 1 KIT (65219-200-05)  *  1 mL in 1 VIAL, SINGLE-DOSE (65219-205-05)  *  1.8 mL in 1 VIAL, SINGLE-DOSE (65219-202-05) </PackageDescription>
    <NDC11Code>65219-0200-05</NDC11Code>
    <ProductNDC>65219-200</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Temsirolimus</ProprietaryName>
    <NonProprietaryName>Temsirolimus</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201120</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207383</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2020-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Temsirolimus injection is indicated for the treatment of advanced renal cell carcinoma.</IndicationAndUsage>
    <Description>Temsirolimus, an inhibitor of mTOR, is an antineoplastic agent. Temsirolimus is a white to off-white powder with a molecular formula of C56H87NO16 and a molecular weight of 1030.30. It is non-hygroscopic. Temsirolimus is practically insoluble in water and soluble in alcohol. It has no ionizable functional groups, and its solubility is independent of pH. The chemical name of temsirolimus is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)-9,10,12,13,14,21,22,23,24,25,26,27,32,33,34,34a-Hexadecahydro-9,27-dihydrox y-3-[(1R)-2-[(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26-hexamethyl-23,27-epoxy-3H-pyrido[2,1-c] [1,4]oxaazacyclohentriacontine-1,5,11,28,29(4H,6H,31H)-pentone 4'-[2,2-bis(hydroxymethyl)propionate]; or Rapamycin, 42-[3-hydroxy-2-(hydroxymethyl)-2-methylpropanoate]. Temsirolimus injection, 25 mg/mL, is a clear, colorless to light yellow, non-aqueous, ethanolic, sterile solution. Temsirolimus injection requires two dilutions prior to intravenous infusion. Temsirolimus injection should be diluted only with the supplied DILUENT for Temsirolimus injection. DILUENT for Temsirolimus injection is a sterile, non-aqueous solution that is supplied with Temsirolimus injection, as a kit. Temsirolimus injection, 25 mg/mL:. Active ingredient: temsirolimus (25 mg/mL). Inactive ingredients: dehydrated alcohol (49.90% v/v), butylated hydroxy anisole (0.0003% w/v), butylated hydroxy toluene (0.002% w/v), propylene glycol (50.3% w/v), and anhydrous citric acid (0.0025% w/v). DILUENT for Temsirolimus injection:. Inactive ingredients: polysorbate 80 (40.0% w/v), polyethylene glycol 400 (42.8% w/v) and dehydrated alcohol (25.14% v/v). After the Temsirolimus injection vial has been diluted with DILUENT for Temsirolimus injection, in accordance with the instructions in section 2.5, the solution contains 35.04% alcohol. Temsirolimus injection and DILUENT for Temsirolimus injection are filled in clear glass vials with butyl rubber stoppers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-218-50</NDCCode>
    <PackageDescription>60 BAG in 1 CASE (65219-218-50)  / 50 mL in 1 BAG (65219-218-01) </PackageDescription>
    <NDC11Code>65219-0218-50</NDC11Code>
    <ProductNDC>65219-218</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170919</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207310</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex®+ bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-220-10</NDCCode>
    <PackageDescription>50 BAG in 1 CASE (65219-220-10)  / 100 mL in 1 BAG (65219-220-01) </PackageDescription>
    <NDC11Code>65219-0220-10</NDC11Code>
    <ProductNDC>65219-220</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170919</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207310</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex®+ bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-222-25</NDCCode>
    <PackageDescription>30 BAG in 1 CASE (65219-222-25)  / 250 mL in 1 BAG (65219-222-01) </PackageDescription>
    <NDC11Code>65219-0222-25</NDC11Code>
    <ProductNDC>65219-222</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170919</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207310</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex®+ bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-224-50</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (65219-224-50)  / 500 mL in 1 BAG (65219-224-01) </PackageDescription>
    <NDC11Code>65219-0224-50</NDC11Code>
    <ProductNDC>65219-224</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170919</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207310</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex®+ bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-241-10</NDCCode>
    <PackageDescription>10 BAG in 1 CASE (65219-241-10)  / 1000 mL in 1 BAG (65219-241-00) </PackageDescription>
    <NDC11Code>65219-0241-10</NDC11Code>
    <ProductNDC>65219-241</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactated Ringers And Dextrose</ProprietaryName>
    <NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride, And Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210332</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>600; 310; 30; 20; 5</StrengthNumber>
    <StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220328</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>These solutions are indicated for parenteral replacement of extracellular losses of fluid and electrolytes, with minimal carbohydrate calories, as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>The product is sterile, nonpyrogenic solution containing isotonic concentration of electrolytes with dextrose in water for injection. The solutions containing dextrose and electrolytes are hypertonic. They are administered by intravenous infusion for parenteral replacement of extracellular losses of fluid and electrolytes, with minimal carbohydrate calories. Each 100 mL of Lactated Ringer's and 5% Dextrose Injection, USP contains dextrose, hydrous 5 g, sodium chloride 600 mg, sodium lactate, anhydrous 310 mg, potassium chloride 30 mg and calcium chloride, dihydrate 20 mg. Contains only hydrochloric acid for pH adjustment. A liter provides 179 calories (from dextrose and lactate), sodium (Na+), 130 mEq, potassium (K+) 4 mEq, calcium (Ca++) 3 mEq, chloride (Cl−) 109 mEq and lactate [CH3CH(OH) COO−] 28 mEq and has a hypertonic osmolar concentration of 525 mOsmol (calc.). The pH is 4.9 (4.0 − 6.5). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. This solution is a parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Calcium Chloride, USP is chemically designated calcium chloride dihydrate (CaCl2  2 H2O), white fragments or granules freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Sodium Lactate, USP is chemically designated monosodium lactate [CH3CH(OH)COONa], a 50% aqueous solution miscible in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-243-50</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (65219-243-50)  / 500 mL in 1 BAG (65219-243-01) </PackageDescription>
    <NDC11Code>65219-0243-50</NDC11Code>
    <ProductNDC>65219-243</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactated Ringers And Dextrose</ProprietaryName>
    <NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride, And Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210332</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>600; 310; 30; 20; 5</StrengthNumber>
    <StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>These solutions are indicated for parenteral replacement of extracellular losses of fluid and electrolytes, with minimal carbohydrate calories, as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>The product is sterile, nonpyrogenic solution containing isotonic concentration of electrolytes with dextrose in water for injection. The solutions containing dextrose and electrolytes are hypertonic. They are administered by intravenous infusion for parenteral replacement of extracellular losses of fluid and electrolytes, with minimal carbohydrate calories. Each 100 mL of Lactated Ringer's and 5% Dextrose Injection, USP contains dextrose, hydrous 5 g, sodium chloride 600 mg, sodium lactate, anhydrous 310 mg, potassium chloride 30 mg and calcium chloride, dihydrate 20 mg. Contains only hydrochloric acid for pH adjustment. A liter provides 179 calories (from dextrose and lactate), sodium (Na+), 130 mEq, potassium (K+) 4 mEq, calcium (Ca++) 3 mEq, chloride (Cl−) 109 mEq and lactate [CH3CH(OH) COO−] 28 mEq and has a hypertonic osmolar concentration of 525 mOsmol (calc.). The pH is 4.9 (4.0 − 6.5). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. This solution is a parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Calcium Chloride, USP is chemically designated calcium chloride dihydrate (CaCl2  2 H2O), white fragments or granules freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Sodium Lactate, USP is chemically designated monosodium lactate [CH3CH(OH)COONa], a 50% aqueous solution miscible in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-456-60</NDCCode>
    <PackageDescription>60 BAG in 1 CASE (65219-456-60)  / 50 mL in 1 BAG (65219-456-05) </PackageDescription>
    <NDC11Code>65219-0456-60</NDC11Code>
    <ProductNDC>65219-456</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240709</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>FRESENIUS KABI USA, LLC</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240709</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-458-30</NDCCode>
    <PackageDescription>30 BAG in 1 CASE (65219-458-30)  / 250 mL in 1 BAG (65219-458-05) </PackageDescription>
    <NDC11Code>65219-0458-30</NDC11Code>
    <ProductNDC>65219-458</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240709</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>FRESENIUS KABI USA, LLC</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240709</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-460-20</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (65219-460-20)  / 500 mL in 1 BAG (65219-460-05) </PackageDescription>
    <NDC11Code>65219-0460-20</NDC11Code>
    <ProductNDC>65219-460</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240709</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>FRESENIUS KABI USA, LLC</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240709</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-462-10</NDCCode>
    <PackageDescription>10 BAG in 1 CASE (65219-462-10)  / 1000 mL in 1 BAG (65219-462-05) </PackageDescription>
    <NDC11Code>65219-0462-10</NDC11Code>
    <ProductNDC>65219-462</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240709</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>FRESENIUS KABI USA, LLC</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240709</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-464-50</NDCCode>
    <PackageDescription>50 BAG in 1 CASE (65219-464-50)  / 100 mL in 1 BAG (65219-464-05) </PackageDescription>
    <NDC11Code>65219-0464-50</NDC11Code>
    <ProductNDC>65219-464</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240709</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>FRESENIUS KABI USA, LLC</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240709</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-531-10</NDCCode>
    <PackageDescription>10 BAG in 1 CASE (65219-531-10)  / 100 mL in 1 BAG (65219-531-01) </PackageDescription>
    <NDC11Code>65219-0531-10</NDC11Code>
    <ProductNDC>65219-531</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Intralipid</ProprietaryName>
    <NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20040401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018449</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SOYBEAN OIL</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intralipid® is indicated as a source of calories and essential fatty acids for adult and pediatric patients requiring parenteral nutrition (PN) and as a source of essential fatty acids for prevention of essential fatty acid deficiency (EFAD).</IndicationAndUsage>
    <Description>Intralipid is a sterile, non-pyrogenic, white, homogenous lipid emulsion for intravenous infusion as a source of calories and essential fatty acids. The lipid content of Intralipid is 0.2 g/mL and comprises soybean oil. The phosphate content is 15 mmol/L. The total energy content, including fat, phospholipids, and glycerin is 2,000 kcal/L. Each 100 mL of Intralipid contains approximately 20 g soybean oil, 1.2 g egg yolk phospholipids, 2.25 g glycerin, water for injection, and sodium hydroxide for pH adjustment (pH 6 to 8.9). Intralipid has an osmolality of approximately 350 mOsmol/kg water (which represents an osmolarity of 260 mOsmoL/L). The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. where are saturated and unsaturated fatty acid residues. The major component fatty acids in Intralipid are linoleic acid (44% to 62%), oleic acid (19% to 30%), palmitic acid (7% to 14%), alpha-linolenic acid (4% to 11%), and stearic acid (1.4% to 5.5%). These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional oxygen and moisture barrier when necessary. Intralipid contains no more than 25 mcg/L of aluminum. The container is not made with natural rubber latex, PVC, or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-533-25</NDCCode>
    <PackageDescription>10 BAG in 1 CASE (65219-533-25)  / 250 mL in 1 BAG (65219-533-01) </PackageDescription>
    <NDC11Code>65219-0533-25</NDC11Code>
    <ProductNDC>65219-533</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Intralipid</ProprietaryName>
    <NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20040401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018449</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SOYBEAN OIL</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intralipid® is indicated as a source of calories and essential fatty acids for adult and pediatric patients requiring parenteral nutrition (PN) and as a source of essential fatty acids for prevention of essential fatty acid deficiency (EFAD).</IndicationAndUsage>
    <Description>Intralipid is a sterile, non-pyrogenic, white, homogenous lipid emulsion for intravenous infusion as a source of calories and essential fatty acids. The lipid content of Intralipid is 0.2 g/mL and comprises soybean oil. The phosphate content is 15 mmol/L. The total energy content, including fat, phospholipids, and glycerin is 2,000 kcal/L. Each 100 mL of Intralipid contains approximately 20 g soybean oil, 1.2 g egg yolk phospholipids, 2.25 g glycerin, water for injection, and sodium hydroxide for pH adjustment (pH 6 to 8.9). Intralipid has an osmolality of approximately 350 mOsmol/kg water (which represents an osmolarity of 260 mOsmoL/L). The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. where are saturated and unsaturated fatty acid residues. The major component fatty acids in Intralipid are linoleic acid (44% to 62%), oleic acid (19% to 30%), palmitic acid (7% to 14%), alpha-linolenic acid (4% to 11%), and stearic acid (1.4% to 5.5%). These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional oxygen and moisture barrier when necessary. Intralipid contains no more than 25 mcg/L of aluminum. The container is not made with natural rubber latex, PVC, or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-535-50</NDCCode>
    <PackageDescription>12 BAG in 1 CASE (65219-535-50)  / 500 mL in 1 BAG (65219-535-01) </PackageDescription>
    <NDC11Code>65219-0535-50</NDC11Code>
    <ProductNDC>65219-535</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Intralipid</ProprietaryName>
    <NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20040401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018449</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SOYBEAN OIL</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intralipid® is indicated as a source of calories and essential fatty acids for adult and pediatric patients requiring parenteral nutrition (PN) and as a source of essential fatty acids for prevention of essential fatty acid deficiency (EFAD).</IndicationAndUsage>
    <Description>Intralipid is a sterile, non-pyrogenic, white, homogenous lipid emulsion for intravenous infusion as a source of calories and essential fatty acids. The lipid content of Intralipid is 0.2 g/mL and comprises soybean oil. The phosphate content is 15 mmol/L. The total energy content, including fat, phospholipids, and glycerin is 2,000 kcal/L. Each 100 mL of Intralipid contains approximately 20 g soybean oil, 1.2 g egg yolk phospholipids, 2.25 g glycerin, water for injection, and sodium hydroxide for pH adjustment (pH 6 to 8.9). Intralipid has an osmolality of approximately 350 mOsmol/kg water (which represents an osmolarity of 260 mOsmoL/L). The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. where are saturated and unsaturated fatty acid residues. The major component fatty acids in Intralipid are linoleic acid (44% to 62%), oleic acid (19% to 30%), palmitic acid (7% to 14%), alpha-linolenic acid (4% to 11%), and stearic acid (1.4% to 5.5%). These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional oxygen and moisture barrier when necessary. Intralipid contains no more than 25 mcg/L of aluminum. The container is not made with natural rubber latex, PVC, or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-584-01</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CARTON (65219-584-01)  / .9 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>65219-0584-01</NDC11Code>
    <ProductNDC>65219-584</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tyenne</ProprietaryName>
    <NonProprietaryName>Tocilizumab-aazg</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20240701</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761275</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>TOCILIZUMAB</SubstanceName>
    <StrengthNumber>162</StrengthNumber>
    <StrengthUnit>mg/.9mL</StrengthUnit>
    <Pharm_Classes>Interleukin 6 Receptor Antagonists [MoA], Interleukin-6 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240701</StartMarketingDatePackage>
    <EndMarketingDatePackage>20261231</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TYENNE® (tocilizumab-aazg) is an interleukin-6 (IL-6) receptor antagonist indicated for treatment of:. Rheumatoid Arthritis (RA) (1.1) : 1 Adult patients with moderately to severely active rheumatoid arthritis who have had an inadequate response to one or more Disease-Modifying Anti-Rheumatic Drugs (DMARDs). .</IndicationAndUsage>
    <Description>Tocilizumab-aazg is a recombinant humanized anti-human interleukin 6 (IL-6) receptor monoclonal antibody of the immunoglobulin IgG1κ (gamma 1, kappa) subclass with a typical H2L2 polypeptide structure. Each light chain and heavy chain consists of 214 and 448 amino acids (excluding the C-terminal lysine), respectively. The four polypeptide chains are linked intra- and inter-molecularly by disulfide bonds. Tocilizumab-aazg has a molecular weight of approximately 148 kDa. The antibody is produced in mammalian (Chinese hamster ovary) cells.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-586-04</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CARTON (65219-586-04)  / .9 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>65219-0586-04</NDC11Code>
    <ProductNDC>65219-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tyenne</ProprietaryName>
    <NonProprietaryName>Tocilizumab-aazg</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20240701</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761275</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>TOCILIZUMAB</SubstanceName>
    <StrengthNumber>162</StrengthNumber>
    <StrengthUnit>mg/.9mL</StrengthUnit>
    <Pharm_Classes>Interleukin 6 Receptor Antagonists [MoA], Interleukin-6 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240701</StartMarketingDatePackage>
    <EndMarketingDatePackage>20261231</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TYENNE® (tocilizumab-aazg) is an interleukin-6 (IL-6) receptor antagonist indicated for treatment of:. Rheumatoid Arthritis (RA) (1.1) : 1 Adult patients with moderately to severely active rheumatoid arthritis who have had an inadequate response to one or more Disease-Modifying Anti-Rheumatic Drugs (DMARDs). .</IndicationAndUsage>
    <Description>Tocilizumab-aazg is a recombinant humanized anti-human interleukin 6 (IL-6) receptor monoclonal antibody of the immunoglobulin IgG1κ (gamma 1, kappa) subclass with a typical H2L2 polypeptide structure. Each light chain and heavy chain consists of 214 and 448 amino acids (excluding the C-terminal lysine), respectively. The four polypeptide chains are linked intra- and inter-molecularly by disulfide bonds. Tocilizumab-aazg has a molecular weight of approximately 148 kDa. The antibody is produced in mammalian (Chinese hamster ovary) cells.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-810-02</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (65219-810-02)  / 2 mL in 1 VIAL, SINGLE-DOSE (65219-810-01) </PackageDescription>
    <NDC11Code>65219-0810-02</NDC11Code>
    <ProductNDC>65219-810</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20201030</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-03-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201030</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
</NDCList>