RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>65219-284-12</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (65219-284-12)  / 1.2 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>65219-0284-12</NDC11Code>
    <ProductNDC>65219-284</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Plerixafor</ProprietaryName>
    <NonProprietaryName>Plerixafor</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230622</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA022311</ApplicationNumber>
    <LabelerName>Fresenius Kabi Usa, LLC</LabelerName>
    <SubstanceName>PLERIXAFOR</SubstanceName>
    <StrengthNumber>24</StrengthNumber>
    <StrengthUnit>mg/1.2mL</StrengthUnit>
    <Pharm_Classes>Hematopoietic Stem Cell Mobilizer [EPC], Increased Hematopoietic Stem Cell Mobilization [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230622</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Plerixafor is indicated in combination with filgrastim to mobilize hematopoietic stem cells (HSCs) to the peripheral blood for collection and subsequent autologous transplantation in patients with non-Hodgkin's lymphoma (NHL) or multiple myeloma (MM).</IndicationAndUsage>
    <Description>Plerixafor injection is a sterile, preservative-free, clear, colorless to pale-yellow, isotonic solution for subcutaneous injection. Each mL of the sterile solution contains 20 mg of plerixafor. Each single-dose vial is filled to deliver 1.2 mL of the sterile solution that contains 24 mg of plerixafor and 5.9 mg of sodium chloride in Water for Injection adjusted to a pH of 6.0 to 7.5 with hydrochloric acid and with sodium hydroxide, if required. Plerixafor is a hematopoietic stem cell mobilizer with a chemical name 1,4-Bis((1,4,8,11-tetraazacyclotetradecan-1-yl)methyl)benzene.  It has the molecular formula C28H54N8. The molecular weight of plerixafor is 502.79 g/mol. The structural formula is provided in Figure 1. Figure 1: Structural Formula. Plerixafor is a white to off-white crystalline solid. It is hygroscopic. Plerixafor has a typical melting point of 131.5°C. The partition coefficient of plerixafor between 1-octanol and pH 7 aqueous buffer is &lt;0.1.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-120-12</NDCCode>
    <PackageDescription>1 VIAL in 1 PACKAGE (65219-120-12)  / 25 mL in 1 VIAL</PackageDescription>
    <NDC11Code>65219-0120-12</NDC11Code>
    <ProductNDC>65219-120</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dalbavancin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Dalbavancin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20251110</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217591</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DALBAVANCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/25mL</StrengthUnit>
    <Pharm_Classes>Lipoglycopeptide Antibacterial [EPC], Lipoglycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dalbavancin for injection is a lipoglycopeptide antibacterial indicated for the treatment of adult and pediatric patients with acute bacterial skin and skin structure infections (ABSSSI) caused by designated susceptible strains of Gram- positive microorganisms. (1.1). To reduce the development of drug-resistant bacteria and maintain the effectiveness of dalbavancin for injection and other antibacterial drugs, dalbavancin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. (1.2).</IndicationAndUsage>
    <Description>Dalbavancin for injection is a lipoglycopeptide antibacterial synthesized from a fermentation product of Nonomuraea species. Dalbavancin is a mixture of five closely related active homologs (A0, A1, B0, B1, and B2); the component B0 is the major component of dalbavancin. The homologs share the same core structure and differ in the fatty acid side chain of the N-acylaminoglucuronic acid moiety (R1) structure and/or the presence of an additional methyl group (R2) on the terminal amino group (shown in the Figure 1 and Table 3 below). The B0 INN chemical name is: 5,31-dichloro-38-de(methoxycarbonyl)-7-demethyl-19-deoxy-56-O- [2-deoxy-2-[(10-methylundecanoyl)amino]-β-D-glucopyranuronosyl]-38-[[3-(dimethylamino)propyl] carbamoyl]-42-O-α-D-mannopyranosyl-15-N-methyl(ristomycin A aglycone) hydrochloride. Dalbavancin for injection is supplied in clear glass vials as a sterile, lyophilized, preservative-free, white to off-white to pale yellow solid. Each vial contains dalbavancin HCl equivalent to 500 mg of dalbavancin as the free base, plus lactose monohydrate (129 mg) and mannitol (129 mg) as excipients. Sodium hydroxide or hydrochloric acid may be added to adjust the pH at the time of manufacture. The powder is to be reconstituted and further diluted for IV infusion [see Dosage and Administration (2.4), How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-445-22</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (65219-445-22)  / 10 mL in 1 VIAL, SINGLE-DOSE (65219-445-12) </PackageDescription>
    <NDC11Code>65219-0445-22</NDC11Code>
    <ProductNDC>65219-445</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Etomidate</ProprietaryName>
    <NonProprietaryName>Etomidate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231001</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215028</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ETOMIDATE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Etomidate Injection USP is indicated by intravenous injection for the induction of general anesthesia. When considering use of etomidate, the usefulness of its hemodynamic properties (see CLINICAL PHARMACOLOGY) should be weighed against the high frequency of transient skeletal muscle movements (see ADVERSE REACTIONS). Intravenous etomidate is also indicated for the supplementation of subpotent anesthetic agents, such as nitrous oxide in oxygen, during maintenance of anesthesia for short operative procedures such as dilation and curettage or cervical conization.</IndicationAndUsage>
    <Description>Etomidate Injection, USP is a sterile, nonpyrogenic solution. Each milliliter contains etomidate USP, 2 mg, propylene glycol USP, 35% v/v. The pH is 6.0 (4.0 to 7.0). It is intended for the induction of general anesthesia by intravenous injection. The drug etomidate is chemically identified as (R)-(+)-ethyl-1-(1-phenylethyl)-1H-imidazole- 5-carboxylate and has the following structural formula:.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-535-50</NDCCode>
    <PackageDescription>12 BAG in 1 CASE (65219-535-50)  / 500 mL in 1 BAG (65219-535-01) </PackageDescription>
    <NDC11Code>65219-0535-50</NDC11Code>
    <ProductNDC>65219-535</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Intralipid</ProprietaryName>
    <NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20040401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018449</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SOYBEAN OIL</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intralipid® is indicated as a source of calories and essential fatty acids for adult and pediatric patients requiring parenteral nutrition (PN) and as a source of essential fatty acids for prevention of essential fatty acid deficiency (EFAD).</IndicationAndUsage>
    <Description>Intralipid is a sterile, non-pyrogenic, white, homogenous lipid emulsion for intravenous infusion as a source of calories and essential fatty acids. The lipid content of Intralipid is 0.2 g/mL and comprises soybean oil. The phosphate content is 15 mmol/L. The total energy content, including fat, phospholipids, and glycerin is 2,000 kcal/L. Each 100 mL of Intralipid contains approximately 20 g soybean oil, 1.2 g egg yolk phospholipids, 2.25 g glycerin, water for injection, and sodium hydroxide for pH adjustment (pH 6 to 8.9). Intralipid has an osmolality of approximately 350 mOsmol/kg water (which represents an osmolarity of 260 mOsmoL/L). The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. where are saturated and unsaturated fatty acid residues. The major component fatty acids in Intralipid are linoleic acid (44% to 62%), oleic acid (19% to 30%), palmitic acid (7% to 14%), alpha-linolenic acid (4% to 11%), and stearic acid (1.4% to 5.5%). These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional oxygen and moisture barrier when necessary. Intralipid contains no more than 25 mcg/L of aluminum. The container is not made with natural rubber latex, PVC, or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-537-50</NDCCode>
    <PackageDescription>12 BAG in 1 CASE (65219-537-50)  / 500 mL in 1 BAG (65219-537-01) </PackageDescription>
    <NDC11Code>65219-0537-50</NDC11Code>
    <ProductNDC>65219-537</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Intralipid</ProprietaryName>
    <NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20040401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019942</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SOYBEAN OIL</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intralipid® is indicated as a source of calories and essential fatty acids for adult and pediatric patients requiring parenteral nutrition and as a source of essential fatty acids for prevention of essential fatty acid deficiency (EFAD).</IndicationAndUsage>
    <Description>Intralipid is a sterile, non-pyrogenic, white, homogenous lipid emulsion for intravenous infusion as a source of calories and essential fatty acids for use in a pharmacy admixture program. The lipid content of Intralipid 30% Pharmacy Bulk Package is 0.3 g/mL and comprises soybean oil. The phosphate content is 15 mmol/L. The total energy content, including fat, phospholipids, and glycerin is 3,000 kcal/L. Each 100 mL of Intralipid contains approximately 30 g soybean oil, 1.2 g egg yolk phospholipids, 1.7 g glycerin, water for injection, and sodium hydroxide for pH adjustment (pH 6 to 8.9). Intralipid has an osmolality of approximately 310 mOsm/kg water (which represents an osmolarity of 200 mOsm/L). The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. where are saturated and unsaturated fatty acid residues. The major component fatty acids in Intralipid are linoleic acid (44% to 62%), oleic acid (19% to 30%), palmitic acid (7% to 14%), alpha-linolenic acid (4% to 11%), and stearic acid (1.4% to 5.5%). These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional oxygen and moisture barrier when necessary. Intralipid contains no more than 25 mcg/L of aluminum. The container is not made with natural rubber latex, PVC, or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>33342-284-12</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (33342-284-12)  / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>33342-0284-12</NDC11Code>
    <ProductNDC>33342-284</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amlodipine,valsartan And Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Amlodipine,valsartan And Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250106</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207299</ApplicationNumber>
    <LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
    <SubstanceName>AMLODIPINE BESYLATE; VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>10; 160; 12.5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amlodipine, valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including amlodipine, hydrochlorothiazide, and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with amlodipine, valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Limitation of Use Amlodipine, valsartan and hydrochlorothiazide tablet is not indicated for the initial therapy of hypertension [see Dosage and Administration (2)].</IndicationAndUsage>
    <Description>Amlodipine, valsartan and hydrochlorothiazide tablets, USP are a fixed combination of amlodipine, valsartan, and hydrochlorothiazide. Amlodipine, valsartan and hydrochlorothiazide tablets, USP contains the besylate salt of amlodipine, a dihydropyridine calcium channel blocker (CCB). Amlodipine besylate, USP is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-Ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulfonate ; its structural formula is. Its molecular formula is C20H25ClN2O5.C6H6O3S and its molecular weight is 567.1. Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to practically white fine powder, soluble in ethanol and methanol and slightly soluble in water. Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2´-(1H-tetrazol-5-yl) [1,1´-biphenyl]-4yl]methyl]-L-valine; its structural formula is. Its molecular formula is C24H29N5O3 and its molecular weight is 435.5. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Amlodipine, valsartan and hydrochlorothiazide film-coated tablets, USP are formulated in 5 strengths for oral administration with a combination of amlodipine besylate, valsartan, and hydrochlorothiazide, providing for the following available combinations. 5/160/12.5 mg, 10/160/12.5 mg, 5/160/25 mg, 10/160/25 mg, and 10/320/25 mg amlodipine besylate/valsartan/hydrochlorothiazide. The inactive ingredients for all strengths of the tablets include colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc. Additionally, the 5/160/12.5 mg strength contains titanium dioxide; the 10/160/12.5 mg strength contains titanium dioxide and yellow and red iron oxides; the 5/160/25 mg strength contains titanium dioxide and yellow iron oxide, and the 10/160/25 mg and 10/320/25 mg strengths both contain yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-284-12</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (50742-284-12) </PackageDescription>
    <NDC11Code>50742-0284-12</NDC11Code>
    <ProductNDC>50742-284</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Colestipol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Colestipol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241203</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217462</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>COLESTIPOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Since no drug is innocuous, strict attention should be paid to the indications and contraindications, particularly when selecting drugs for chronic long-term use. Colestipol Hydrochloride Tablets are indicated as adjunctive therapy to diet for the reduction of elevated serum total and LDL-C in patients with primary hypercholesterolemia (elevated LDL-C) who do not respond adequately to diet. Generally, Colestipol Hydrochloride Tablets have no clinically significant effect on serum triglycerides, but with their use, triglyceride levels may be raised in some patients. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy (see NCEP guidelines). A minimum of six months of intensive dietary therapy and counseling should be carried out prior to initiation of drug therapy. Shorter periods may be considered in patients with severe elevations of LDL-C or with definite CHD. According to the NCEP guidelines, the goal of treatment is to lower LDL-C, and LDL-C is to be used to initiate and assess treatment response. Only if LDL-C levels are not available, should the Total-C be used to monitor therapy. The NCEP treatment guidelines are shown below.</IndicationAndUsage>
    <Description>The active ingredient in Colestipol Hydrochloride Tablets is colestipol hydrochloride, USP, which is a lipid lowering agent for oral use. Colestipol is an insoluble, high molecular weight basic anion-exchange copolymer of diethylenetriamine and 1-chloro-2, 3-epoxypropane, with approximately 1 out of 5 amine nitrogens protonated (chloride form). It is a light yellow water-insoluble resin which is hygroscopic and swells when suspended in water or aqueous fluids. Each Colestipol Hydrochloride Tablet contains one gram of colestipol hydrochloride, USP. Colestipol Hydrochloride is pale-yellow to yellow in color. Inactive ingredients: povidone, colloidal silicon dioxide, microcrystalline cellulose, magnesium stearate, cellacefate, triacetin and Opadry clear 06K190000. Colestipol Hydrochloride Tablets contain no calories.</Description>
  </NDC>
  <NDC>
    <NDCCode>52544-284-12</NDCCode>
    <PackageDescription>15 APPLICATOR in 1 CARTON (52544-284-12)  &gt; 1.125 g in 1 APPLICATOR</PackageDescription>
    <NDC11Code>52544-0284-12</NDC11Code>
    <ProductNDC>52544-284</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Crinone</ProprietaryName>
    <NonProprietaryName>Progesterone</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>VAGINAL</RouteName>
    <StartMarketingDate>19970513</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020701</ApplicationNumber>
    <LabelerName>Actavis Pharma, Inc.</LabelerName>
    <SubstanceName>PROGESTERONE</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/1.125g</StrengthUnit>
    <Pharm_Classes>Progesterone [CS],Progesterone [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-12-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>68428-284-12</NDCCode>
    <PackageDescription>600 PELLET in 1 BOTTLE, GLASS (68428-284-12) </PackageDescription>
    <NDC11Code>68428-0284-12</NDC11Code>
    <ProductNDC>68428-284</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Cantharis</ProprietaryName>
    <NonProprietaryName>Lytta Vesicatoria</NonProprietaryName>
    <DosageFormName>PELLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100202</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Washington Homeopathic Products</LabelerName>
    <SubstanceName>LYTTA VESICATORIA</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[hp_C]/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2023-08-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100202</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>65219-021-01</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (65219-021-01)  / 1 mL in 1 VIAL, SINGLE-DOSE (65219-021-00) </PackageDescription>
    <NDC11Code>65219-0021-01</NDC11Code>
    <ProductNDC>65219-021</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxytocin</ProprietaryName>
    <NonProprietaryName>Oxytocin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20240506</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018248</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>OXYTOCIN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Increased Uterine Smooth Muscle Contraction or Tone [PE], Oxytocic [EPC], Oxytocin [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Each mL of Oxytocin Injection, USP (synthetic), intended for intravenous infusion or intramuscular injection, possesses an oxytocic activity equivalent to 10 USP Oxytocin Units and contains chlorobutanol anhydrous (chloral derivative) 0.5%. This product may contain up to 12.5% decomposition products/impurities. Oxytocin injection (synthetic) is a sterile, clear, colorless solution of oxytocin in Water for Injection prepared by synthesis. Acetic acid may have been added for pH adjustment (pH 3.0-5.0). The structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-027-50</NDCCode>
    <PackageDescription>25 VIAL, GLASS in 1 TRAY (65219-027-50)  / 50 mL in 1 VIAL, GLASS (65219-027-05) </PackageDescription>
    <NDC11Code>65219-0027-50</NDC11Code>
    <ProductNDC>65219-027</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ascorbic Acid</ProprietaryName>
    <NonProprietaryName>Ascorbic Acid</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20251208</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217131</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ASCORBIC ACID</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Ascorbic Acid [CS], Vitamin C [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251208</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ascorbic acid injection is indicated for the short term (up to 1 week) treatment of scurvy in adult and pediatric patients, age 5 months and older, for whom oral administration is not possible, insufficient or contraindicated.  Limitations of Use.  Ascorbic acid injection is not indicated for the treatment of vitamin C deficiency that is not associated with signs and symptoms of scurvy.</IndicationAndUsage>
    <Description>Ascorbic acid injection, USP for intravenous use is a colorless to pale yellow, preservative-free, hypertonic, sterile, non-pyrogenic solution of ascorbic acid. Ascorbic acid injection must be diluted with an appropriate infusion solution (e.g., 5% Dextrose Injection, USP; Sterile Water for Injection, USP) [see Dosage and Administration (2.1)]. The chemical name of ascorbic acid, USP is L-ascorbic acid. The molecular formula is C6H8O6. It has the following structural formula. Each ascorbic acid injection, USP, 50 mL, Pharmacy Bulk Package vial that contains 25,000 mg ascorbic acid, equivalent to 28,125 mg sodium ascorbate. Each mL of ascorbic acid injection, USP contains 500 mg of ascorbic acid (equivalent to 562.5 mg of sodium ascorbate which amounts to 65 mg sodium/mL of ascorbic acid injection), 130 mg of sodium bicarbonate 0.28 mg of edetate disodium (dihydrate). Sodium hydroxide is added for pH adjustment (pH range 5.6 to 6.6). It contains no bacteriostatic or antimicrobial agent.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-027-55</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (65219-027-55)  / 50 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>65219-0027-55</NDC11Code>
    <ProductNDC>65219-027</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ascorbic Acid</ProprietaryName>
    <NonProprietaryName>Ascorbic Acid</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20251208</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217131</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ASCORBIC ACID</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Ascorbic Acid [CS], Vitamin C [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251208</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ascorbic acid injection is indicated for the short term (up to 1 week) treatment of scurvy in adult and pediatric patients, age 5 months and older, for whom oral administration is not possible, insufficient or contraindicated.  Limitations of Use.  Ascorbic acid injection is not indicated for the treatment of vitamin C deficiency that is not associated with signs and symptoms of scurvy.</IndicationAndUsage>
    <Description>Ascorbic acid injection, USP for intravenous use is a colorless to pale yellow, preservative-free, hypertonic, sterile, non-pyrogenic solution of ascorbic acid. Ascorbic acid injection must be diluted with an appropriate infusion solution (e.g., 5% Dextrose Injection, USP; Sterile Water for Injection, USP) [see Dosage and Administration (2.1)]. The chemical name of ascorbic acid, USP is L-ascorbic acid. The molecular formula is C6H8O6. It has the following structural formula. Each ascorbic acid injection, USP, 50 mL, Pharmacy Bulk Package vial that contains 25,000 mg ascorbic acid, equivalent to 28,125 mg sodium ascorbate. Each mL of ascorbic acid injection, USP contains 500 mg of ascorbic acid (equivalent to 562.5 mg of sodium ascorbate which amounts to 65 mg sodium/mL of ascorbic acid injection), 130 mg of sodium bicarbonate 0.28 mg of edetate disodium (dihydrate). Sodium hydroxide is added for pH adjustment (pH range 5.6 to 6.6). It contains no bacteriostatic or antimicrobial agent.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-029-20</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (65219-029-20)  &gt; 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>65219-0029-20</NDC11Code>
    <ProductNDC>65219-029</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Thiotepa</ProprietaryName>
    <NonProprietaryName>Thiotepa</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRACAVITARY; INTRAVENOUS; INTRAVESICAL</RouteName>
    <StartMarketingDate>20220411</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214222</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>THIOTEPA</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-04-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220411</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Thiotepa for injection is an alkylating drug indicated:  For treatment of adenocarcinoma of the breast or ovary. (1.2)  For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. (1.3)  For treatment of superficial papillary carcinoma of the urinary bladder. (1.4).</IndicationAndUsage>
    <Description>Thiotepa is an alkylating agent. Thiotepa for injection, USP is supplied as a non-pyrogenic, sterile lyophilized white powder for intravenous, intracavitary, or intravesical use after reconstitution and dilution. Thiotepa for Injection, USP is available in a single-dose vial containing.      100 mg thiotepa. After reconstitution with 10 ml of water for injection, each ml contains 10 mg thiotepa. Thiotepa is a synthetic product with antitumor activity. The chemical name for thiotepa is Tris(1-aziridinyl)phosphine sulfide. Thiotepa has the following structural formula. Thiotepa, USP has the molecular formula C6H12N3PS, and a molecular weight of 189.23, and it appears as fine, white crystalline flakes, with a melting range of 52°C to 57°C. It is soluble in water and organic solvents. When reconstituted with sterile water for injection, the resulting solution has a pH of approximately 5.5 to 7.5. Thiotepa is unstable in acid medium.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-128-01</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (65219-128-01)  / 1 mL in 1 VIAL (65219-128-00) </PackageDescription>
    <NDC11Code>65219-0128-01</NDC11Code>
    <ProductNDC>65219-128</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Chlorpromazine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Chlorpromazine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20250215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216724</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CHLORPROMAZINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of schizophrenia; to control nausea and vomiting; for relief of restlessness and apprehension before surgery; for acute intermittent porphyria; as an adjunct in the treatment of tetanus; to control the manifestations of the manic type of manic-depressive illness; for relief of intractable hiccups; for the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance.</IndicationAndUsage>
    <Description>Chlorpromazine HCl is chemically designated as 2-Chloro-10-[3-(dimethylamino)propyl]-phenothiazine monohydrochloride and has the following structural formula.                                                                               C17H19ClN2S.HCl                 MW 355.33. Chlorpromazine Hydrochloride Injection, USP is a sterile aqueous solution intended for deep intramuscular use. Each mL contains chlorpromazine hydrochloride 25 mg, ascorbic acid 2 mg, sodium metabisulfite 1 mg, sodium sulfite 1 mg and sodium chloride 6 mg in Water for Injection. pH is 3.4-5.4.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-130-02</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (65219-130-02)  / 2 mL in 1 VIAL (65219-130-01) </PackageDescription>
    <NDC11Code>65219-0130-02</NDC11Code>
    <ProductNDC>65219-130</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Chlorpromazine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Chlorpromazine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20250215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216724</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CHLORPROMAZINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of schizophrenia; to control nausea and vomiting; for relief of restlessness and apprehension before surgery; for acute intermittent porphyria; as an adjunct in the treatment of tetanus; to control the manifestations of the manic type of manic-depressive illness; for relief of intractable hiccups; for the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance.</IndicationAndUsage>
    <Description>Chlorpromazine HCl is chemically designated as 2-Chloro-10-[3-(dimethylamino)propyl]-phenothiazine monohydrochloride and has the following structural formula.                                                                               C17H19ClN2S.HCl                 MW 355.33. Chlorpromazine Hydrochloride Injection, USP is a sterile aqueous solution intended for deep intramuscular use. Each mL contains chlorpromazine hydrochloride 25 mg, ascorbic acid 2 mg, sodium metabisulfite 1 mg, sodium sulfite 1 mg and sodium chloride 6 mg in Water for Injection. pH is 3.4-5.4.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-200-05</NDCCode>
    <PackageDescription>1 KIT in 1 KIT (65219-200-05)  *  1 mL in 1 VIAL, SINGLE-DOSE (65219-205-05)  *  1.8 mL in 1 VIAL, SINGLE-DOSE (65219-202-05) </PackageDescription>
    <NDC11Code>65219-0200-05</NDC11Code>
    <ProductNDC>65219-200</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Temsirolimus</ProprietaryName>
    <NonProprietaryName>Temsirolimus</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201120</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207383</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2020-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Temsirolimus injection is indicated for the treatment of advanced renal cell carcinoma.</IndicationAndUsage>
    <Description>Temsirolimus, an inhibitor of mTOR, is an antineoplastic agent. Temsirolimus is a white to off-white powder with a molecular formula of C56H87NO16 and a molecular weight of 1030.30. It is non-hygroscopic. Temsirolimus is practically insoluble in water and soluble in alcohol. It has no ionizable functional groups, and its solubility is independent of pH. The chemical name of temsirolimus is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)-9,10,12,13,14,21,22,23,24,25,26,27,32,33,34,34a-Hexadecahydro-9,27-dihydrox y-3-[(1R)-2-[(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26-hexamethyl-23,27-epoxy-3H-pyrido[2,1-c] [1,4]oxaazacyclohentriacontine-1,5,11,28,29(4H,6H,31H)-pentone 4'-[2,2-bis(hydroxymethyl)propionate]; or Rapamycin, 42-[3-hydroxy-2-(hydroxymethyl)-2-methylpropanoate]. Temsirolimus injection, 25 mg/mL, is a clear, colorless to light yellow, non-aqueous, ethanolic, sterile solution. Temsirolimus injection requires two dilutions prior to intravenous infusion. Temsirolimus injection should be diluted only with the supplied DILUENT for Temsirolimus injection. DILUENT for Temsirolimus injection is a sterile, non-aqueous solution that is supplied with Temsirolimus injection, as a kit. Temsirolimus injection, 25 mg/mL:. Active ingredient: temsirolimus (25 mg/mL). Inactive ingredients: dehydrated alcohol (49.90% v/v), butylated hydroxy anisole (0.0003% w/v), butylated hydroxy toluene (0.002% w/v), propylene glycol (50.3% w/v), and anhydrous citric acid (0.0025% w/v). DILUENT for Temsirolimus injection:. Inactive ingredients: polysorbate 80 (40.0% w/v), polyethylene glycol 400 (42.8% w/v) and dehydrated alcohol (25.14% v/v). After the Temsirolimus injection vial has been diluted with DILUENT for Temsirolimus injection, in accordance with the instructions in section 2.5, the solution contains 35.04% alcohol. Temsirolimus injection and DILUENT for Temsirolimus injection are filled in clear glass vials with butyl rubber stoppers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-234-10</NDCCode>
    <PackageDescription>60 BAG in 1 CASE (65219-234-10)  / 50 mL in 1 BAG (65219-234-01) </PackageDescription>
    <NDC11Code>65219-0234-10</NDC11Code>
    <ProductNDC>65219-234</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20161021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>2500</StrengthNumber>
    <StrengthUnit>mg/50mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C 6H 12O 6  H 2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex® + bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-236-10</NDCCode>
    <PackageDescription>50 BAG in 1 CASE (65219-236-10)  / 100 mL in 1 BAG (65219-236-01) </PackageDescription>
    <NDC11Code>65219-0236-10</NDC11Code>
    <ProductNDC>65219-236</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20161021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>mg/100mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C 6H 12O 6  H 2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex® + bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-238-25</NDCCode>
    <PackageDescription>30 BAG in 1 CASE (65219-238-25)  / 250 mL in 1 BAG (65219-238-01) </PackageDescription>
    <NDC11Code>65219-0238-25</NDC11Code>
    <ProductNDC>65219-238</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20161021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>12500</StrengthNumber>
    <StrengthUnit>mg/250mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C 6H 12O 6  H 2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex® + bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-240-50</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (65219-240-50)  / 500 mL in 1 BAG (65219-240-01) </PackageDescription>
    <NDC11Code>65219-0240-50</NDC11Code>
    <ProductNDC>65219-240</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20161021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207449</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>25000</StrengthNumber>
    <StrengthUnit>mg/500mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C 6H 12O 6  H 2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex® + bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-368-02</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (65219-368-02)  / 1 mL in 1 VIAL (65219-368-01) </PackageDescription>
    <NDC11Code>65219-0368-02</NDC11Code>
    <ProductNDC>65219-368</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lorazepam</ProprietaryName>
    <NonProprietaryName>Lorazepam</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20241213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217598</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LORAZEPAM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241213</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lorazepam Injection is indicated for the treatment of status epilepticus.</IndicationAndUsage>
    <Description>Lorazepam, a benzodiazepine with antianxiety, sedative, and anticonvulsant effects, is intended for the intramuscular or intravenous routes of administration. It has the chemical formula: 7-chloro-5(2- chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1, 4-benzodiazepin-2-one. The molecular weight is 321.16, and the C.A.S. No. is [846-49-1]. The structural formula is:. Lorazepam is a nearly white powder almost insoluble in water. Each mL of sterile injection contains 2 mg of lorazepam, 0.18 mL polyethylene glycol 400 in propylene glycol with 2% benzyl alcohol as preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-401-01</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (65219-401-01)  &gt; 10 mL in 1 VIAL (65219-401-00) </PackageDescription>
    <NDC11Code>65219-0401-01</NDC11Code>
    <ProductNDC>65219-401</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zinc Sulfate</ProprietaryName>
    <NonProprietaryName>Zinc Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221227</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216145</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ZINC SULFATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221227</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Zinc Sulfate Injection is indicated in adult and pediatric patients as a source of zinc for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
    <Description>Zinc Sulfate Injection, USP is a sterile, clear, colorless solution, essentially free from visible particles intended for use as a trace element and an additive to intravenous solutions for parenteral nutrition. 10 mg per 10 mL Pharmacy Bulk Package vial. Each mL contains 1 mg of zinc present as a 2.46 mg of zinc sulfate and water for injection, q.s. 30 mg per 10 mL Pharmacy Bulk Package vial. Each mL contains 3 mg of zinc present as 7.41 mg of zinc sulfate and water for injection, q.s. 25 mg per 5 mL Pharmacy Bulk Package vial. Each mL contains 5 mg of zinc present as 12.32 mg of zinc sulfate and water for injection, q.s. All presentations do not contain preservatives. The pH range is 2 to 4; pH may be adjusted with sulfuric acid. 1 mg/mL of Zinc Sulfate Injection contains no more than 1,500 mcg/L of aluminum and has a calculated osmolarity of 33 mOsmol/L. 3 mg/mL of Zinc Sulfate Injection contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 96.5 mOsmol/L. 5 mg/mL of Zinc Sulfate Injection contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 157.2 mOsmol/L. Zinc sulfate heptahydrate, USP has a molecular weight of 287.54 g/mol and a formula of ZnSO4·7H2O.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-403-03</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (65219-403-03)  &gt; 10 mL in 1 VIAL (65219-403-01) </PackageDescription>
    <NDC11Code>65219-0403-03</NDC11Code>
    <ProductNDC>65219-403</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zinc Sulfate</ProprietaryName>
    <NonProprietaryName>Zinc Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221227</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216145</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ZINC SULFATE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221227</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Zinc Sulfate Injection is indicated in adult and pediatric patients as a source of zinc for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
    <Description>Zinc Sulfate Injection, USP is a sterile, clear, colorless solution, essentially free from visible particles intended for use as a trace element and an additive to intravenous solutions for parenteral nutrition. 10 mg per 10 mL Pharmacy Bulk Package vial. Each mL contains 1 mg of zinc present as a 2.46 mg of zinc sulfate and water for injection, q.s. 30 mg per 10 mL Pharmacy Bulk Package vial. Each mL contains 3 mg of zinc present as 7.41 mg of zinc sulfate and water for injection, q.s. 25 mg per 5 mL Pharmacy Bulk Package vial. Each mL contains 5 mg of zinc present as 12.32 mg of zinc sulfate and water for injection, q.s. All presentations do not contain preservatives. The pH range is 2 to 4; pH may be adjusted with sulfuric acid. 1 mg/mL of Zinc Sulfate Injection contains no more than 1,500 mcg/L of aluminum and has a calculated osmolarity of 33 mOsmol/L. 3 mg/mL of Zinc Sulfate Injection contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 96.5 mOsmol/L. 5 mg/mL of Zinc Sulfate Injection contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 157.2 mOsmol/L. Zinc sulfate heptahydrate, USP has a molecular weight of 287.54 g/mol and a formula of ZnSO4·7H2O.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-405-05</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (65219-405-05)  &gt; 5 mL in 1 VIAL (65219-405-02) </PackageDescription>
    <NDC11Code>65219-0405-05</NDC11Code>
    <ProductNDC>65219-405</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zinc Sulfate</ProprietaryName>
    <NonProprietaryName>Zinc Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221227</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216145</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ZINC SULFATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221227</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Zinc Sulfate Injection is indicated in adult and pediatric patients as a source of zinc for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
    <Description>Zinc Sulfate Injection, USP is a sterile, clear, colorless solution, essentially free from visible particles intended for use as a trace element and an additive to intravenous solutions for parenteral nutrition. 10 mg per 10 mL Pharmacy Bulk Package vial. Each mL contains 1 mg of zinc present as a 2.46 mg of zinc sulfate and water for injection, q.s. 30 mg per 10 mL Pharmacy Bulk Package vial. Each mL contains 3 mg of zinc present as 7.41 mg of zinc sulfate and water for injection, q.s. 25 mg per 5 mL Pharmacy Bulk Package vial. Each mL contains 5 mg of zinc present as 12.32 mg of zinc sulfate and water for injection, q.s. All presentations do not contain preservatives. The pH range is 2 to 4; pH may be adjusted with sulfuric acid. 1 mg/mL of Zinc Sulfate Injection contains no more than 1,500 mcg/L of aluminum and has a calculated osmolarity of 33 mOsmol/L. 3 mg/mL of Zinc Sulfate Injection contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 96.5 mOsmol/L. 5 mg/mL of Zinc Sulfate Injection contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 157.2 mOsmol/L. Zinc sulfate heptahydrate, USP has a molecular weight of 287.54 g/mol and a formula of ZnSO4·7H2O.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-429-50</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (65219-429-50)  / 50 mL in 1 VIAL</PackageDescription>
    <NDC11Code>65219-0429-50</NDC11Code>
    <ProductNDC>65219-429</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Argatroban</ProprietaryName>
    <NonProprietaryName>Argatroban</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210524</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214235</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ARGATROBAN</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/50mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210524</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Argatroban is a direct thrombin inhibitor indicated: : 1 For prophylaxis or treatment of thrombosis in adult patients with heparin-induced thrombocytopenia (HIT) (1.1) , 2 As an anticoagulant in adults patients with or at risk for HIT undergoing percutaneous coronary intervention (PCI) (1.2) .</IndicationAndUsage>
    <Description>Argatroban is a synthetic direct thrombin inhibitor and the chemical name is 1-[5 [(aminoiminomethyl) amino]-1-oxo-2-[[(1, 2, 3, 4-tetrahydro-3-methyl-8-quinolinyl) sulfonyl] amino] pentyl]-4-methyl-2-piperidinecarboxylic acid, monohydrate. Argatroban has 4 asymmetric carbons. One of the asymmetric carbons has an R configuration (stereoisomer Type I) and an S configuration (stereoisomer Type II). Argatroban consists of a mixture of R and S stereoisomers at a ratio of approximately 65:35. The molecular formula of argatroban is C23H36N6O5SH2O. Its molecular weight is 526.66 g/mol. The structural formula is shown below:. Argatroban is a white, odorless crystalline powder that is freely soluble in glacial acetic acid, slightly soluble in ethanol, and insoluble in acetone, ethyl acetate, and ether. Argatroban Injection, USP 50 mg/50 mL (1 mg/mL) is a sterile clear, colorless to pale yellow, solution. Argatroban Injection, USP 50 mg/50 mL (1 mg/mL) is available in 50 mg (in 50 mL) single-dose clear vials, with flip-off seals. Each mL of sterile, non-pyrogenic solution contains 1 mg Argatroban. Inert ingredients (per vial): 260 mg Propylene glycol, 152 mg Dehydrated alcohol, and 450 mg Sodium Chloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-495-10</NDCCode>
    <PackageDescription>6 BAG in 1 CASE (65219-495-10)  / 1000 mL in 1 BAG (65219-495-01) </PackageDescription>
    <NDC11Code>65219-0495-10</NDC11Code>
    <ProductNDC>65219-495</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sterile Water</ProprietaryName>
    <NonProprietaryName>Water</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>IRRIGATION</RouteName>
    <StartMarketingDate>20251219</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216123</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>WATER</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mL/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251219</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sterile Water for Irrigation is indicated for use as an irrigating fluid or pharmaceutic aid. Sterile Water may also be used as an adjunct in the preparation of non-intravenously administered nutrient mixtures (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Sterile Water for Irrigation, USP is a sterile, hypotonic, nonpyrogenic irrigating fluid or pharmaceutic aid (solvent) entirely composed of Sterile Water for Injection, USP. It is prepared by distillation and contains no antimicrobial or bacteriostatic agents or added buffers. The pH is 5.7 (5.0-7.0). The flexible plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers. The solution contact layer is a copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. Not made with natural rubber latex, PVC or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-497-20</NDCCode>
    <PackageDescription>5 BAG in 1 CASE (65219-497-20)  / 2000 mL in 1 BAG (65219-497-02) </PackageDescription>
    <NDC11Code>65219-0497-20</NDC11Code>
    <ProductNDC>65219-497</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sterile Water</ProprietaryName>
    <NonProprietaryName>Water</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>IRRIGATION</RouteName>
    <StartMarketingDate>20251219</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216123</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>WATER</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mL/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251219</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sterile Water for Irrigation is indicated for use as an irrigating fluid or pharmaceutic aid. Sterile Water may also be used as an adjunct in the preparation of non-intravenously administered nutrient mixtures (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Sterile Water for Irrigation, USP is a sterile, hypotonic, nonpyrogenic irrigating fluid or pharmaceutic aid (solvent) entirely composed of Sterile Water for Injection, USP. It is prepared by distillation and contains no antimicrobial or bacteriostatic agents or added buffers. The pH is 5.7 (5.0-7.0). The flexible plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers. The solution contact layer is a copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. Not made with natural rubber latex, PVC or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-502-10</NDCCode>
    <PackageDescription>6 BAG in 1 CASE (65219-502-10)  / 1000 mL in 1 BAG (65219-502-01) </PackageDescription>
    <NDC11Code>65219-0502-10</NDC11Code>
    <ProductNDC>65219-502</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>IRRIGATION</RouteName>
    <StartMarketingDate>20251219</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213688</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>.9</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251219</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>0.9% Sodium Chloride Irrigation is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of a sterile, nonpyrogenic electrolyte solution.</IndicationAndUsage>
    <Description>Each 100 mL contains. Sodium Chloride, USP 0.9 g; Water for Injection, USP qs pH adjusted with Hydrochloric Acid, NF. pH: 5.75 (4.50-7.00). Calculated Osmolarity: 308 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154. 0.9% Sodium Chloride Irrigation, USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is. The flexible plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers. The solution contact layer is a copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. Not made with natural rubber latex, PVC or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-504-20</NDCCode>
    <PackageDescription>5 BAG in 1 CASE (65219-504-20)  / 2000 mL in 1 BAG (65219-504-02) </PackageDescription>
    <NDC11Code>65219-0504-20</NDC11Code>
    <ProductNDC>65219-504</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>IRRIGATION</RouteName>
    <StartMarketingDate>20251219</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213688</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>.9</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251219</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>0.9% Sodium Chloride Irrigation is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of a sterile, nonpyrogenic electrolyte solution.</IndicationAndUsage>
    <Description>Each 100 mL contains. Sodium Chloride, USP 0.9 g; Water for Injection, USP qs pH adjusted with Hydrochloric Acid, NF. pH: 5.75 (4.50-7.00). Calculated Osmolarity: 308 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154. 0.9% Sodium Chloride Irrigation, USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is. The flexible plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers. The solution contact layer is a copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. Not made with natural rubber latex, PVC or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-510-20</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (65219-510-20)  / 20 mL in 1 VIAL, SINGLE-DOSE (65219-510-02) </PackageDescription>
    <NDC11Code>65219-0510-20</NDC11Code>
    <ProductNDC>65219-510</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Acetate</ProprietaryName>
    <NonProprietaryName>Potassium Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20241127</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217515</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>POTASSIUM ACETATE</SubstanceName>
    <StrengthNumber>3.93</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241127</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Potassium Acetate Injection, 40 mEq is indicated as a source of potassium, for the addition to large volume intravenous fluids, to prevent or correct hypokalemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.</IndicationAndUsage>
    <Description>Potassium Acetate Injection, USP, 40 mEq is a sterile, nonpyrogenic, concentrated solution of potassium acetate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each 20 mL vial contains 3.93 g of potassium acetate which provides 40 mEq each of potassium (K+) and acetate (CH3COO−). It contains no bacteriostat, antimicrobial agent or added buffer. May contain acetic acid for pH adjustment. pH 6.2 (5.5 to 8.0). The osmolar concentration is 4 mOsmol/mL (calc.). The solution is intended as an alternative to potassium chloride to provide potassium ion (K+) for addition to large volume infusion fluids for intravenous use. Potassium acetate, USP is chemically designated CH3COOK, colorless crystals or white crystalline powder very soluble in water. The semi-rigid vial is fabricated from a specially formulated polypropylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.</Description>
  </NDC>
</NDCList>