{
"NDC": [
{
"NDCCode": "65219-504-20",
"PackageDescription": "5 BAG in 1 CASE (65219-504-20) / 2000 mL in 1 BAG (65219-504-02) ",
"NDC11Code": "65219-0504-20",
"ProductNDC": "65219-504",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "IRRIGATION",
"StartMarketingDate": "20251219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213688",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": ".9",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251219",
"SamplePackage": "N",
"IndicationAndUsage": "0.9% Sodium Chloride Irrigation is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of a sterile, nonpyrogenic electrolyte solution.",
"Description": "Each 100 mL contains. Sodium Chloride, USP 0.9 g; Water for Injection, USP qs pH adjusted with Hydrochloric Acid, NF. pH: 5.75 (4.50-7.00). Calculated Osmolarity: 308 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154. 0.9% Sodium Chloride Irrigation, USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is. The flexible plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers. The solution contact layer is a copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. Not made with natural rubber latex, PVC or DEHP."
},
{
"NDCCode": "42961-504-30",
"PackageDescription": "20 POUCH in 1 BOX (42961-504-30) > 1 mL in 1 POUCH (42961-504-00)",
"NDC11Code": "42961-0504-30",
"ProductNDC": "42961-504",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Alcohol Wipe",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "SWAB",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140225",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part344",
"LabelerName": "Cintas Corporation",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": ".7",
"StrengthUnit": "g/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Uses. First aid to help prevent infection in minor cuts, scrapes, and burns."
},
{
"NDCCode": "43744-504-20",
"PackageDescription": "15 g in 1 DRUM (43744-504-20)",
"NDC11Code": "43744-0504-20",
"ProductNDC": "43744-504",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Iron Sucrose",
"DosageFormName": "POWDER",
"StartMarketingDate": "20100720",
"EndMarketingDate": "20100811",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "IRON SUCROSE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20100811"
},
{
"NDCCode": "43744-504-22",
"PackageDescription": "20 g in 1 DRUM (43744-504-22)",
"NDC11Code": "43744-0504-22",
"ProductNDC": "43744-504",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Iron Sucrose",
"DosageFormName": "POWDER",
"StartMarketingDate": "20100720",
"EndMarketingDate": "20100811",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "IRON SUCROSE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20100811"
},
{
"NDCCode": "51790-504-01",
"PackageDescription": "20 mL in 1 BOTTLE, SPRAY (51790-504-01) ",
"NDC11Code": "51790-0504-01",
"ProductNDC": "51790-504",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Breathable Camouflage Light Caramel",
"NonProprietaryName": "Titanium Dioxide And Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20171223",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Quura Medical B.V",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "65; 82",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20171223",
"SamplePackage": "N"
},
{
"NDCCode": "52962-504-20",
"PackageDescription": "20 kg in 1 DRUM (52962-504-20)",
"NDC11Code": "52962-0504-20",
"ProductNDC": "52962-504",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Penicillin G Procaine",
"DosageFormName": "POWDER",
"StartMarketingDate": "19970820",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "CSPC Zhongnuo Pharmaceutical (Shijiazhuang) Co., Ltd.",
"SubstanceName": "PENICILLIN G PROCAINE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "55316-504-60",
"PackageDescription": "20 BLISTER PACK in 1 CARTON (55316-504-60) > 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55316-0504-60",
"ProductNDC": "55316-504",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Healthy Accents Congestion Relief",
"NonProprietaryName": "Ibuprofen, Phenylephrine Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203200",
"LabelerName": "DZA Brands LLC",
"SubstanceName": "IBUPROFEN; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "200; 10",
"StrengthUnit": "mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-11-29"
},
{
"NDCCode": "68083-504-10",
"PackageDescription": "10 VIAL in 1 CARTON (68083-504-10) / 20 mL in 1 VIAL",
"NDC11Code": "68083-0504-10",
"ProductNDC": "68083-504",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketamine Hydrochloride",
"NonProprietaryName": "Ketamine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216809",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "KETAMINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Ketamine hydrochloride injection is indicated: as the sole anesthetic agent for diagnostic and surgical procedures that do not require skeletal muscle relaxation. for the induction of anesthesia prior to the administration of other general anesthetic agents. as a supplement to other anesthetic agents.",
"Description": "Ketamine hydrochloride injection, USP for intravenous or intramuscular use, contains ketamine, a nonbarbiturate general anesthetic. Ketamine hydrochloride, USP is a white or almost white, crystalline powder and has a molecular formula of C13H16ClNOHCl and a molecular weight of 274.19. The chemical name for ketamine hydrochloride is 2-(2-chlorophenyl)-2-(methylamino)cyclohexan-1-one hydrochloride. The chemical structure of ketamine hydrochloride is. It is formulated as a slightly acidic (pH 3.5-5.5) sterile solution for intravenous or intramuscular injection. Each milliliter (mL) of the multiple-dose vials contain either 10 mg ketamine base (equivalent to 11.53 mg ketamine hydrochloride), 50 mg ketamine base (equivalent to 57.67 mg ketamine hydrochloride) or 100 mg ketamine base (equivalent to 115.33 mg ketamine hydrochloride) and not more than 0.10 mg/mL benzethonium chloride added as a preservative in water for injection. The 10 mg/mL solution has been made isotonic with 6.60 mg sodium chloride."
},
{
"NDCCode": "70954-504-20",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (70954-504-20) ",
"NDC11Code": "70954-0504-20",
"ProductNDC": "70954-504",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Selegiline Hydrochloride",
"NonProprietaryName": "Selegiline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075352",
"LabelerName": "Novitium Pharma LLC",
"SubstanceName": "SELEGILINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA], Monoamine Oxidase Type B Inhibitor [EPC], Monoamine Oxidase-B Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210401",
"SamplePackage": "N",
"IndicationAndUsage": "Selegiline hydrochloride capsules, USP are indicated as an adjunct in the management of Parkinsonian patients being treated with levodopa/carbidopa who exhibit deterioration in the quality of their response to this therapy. There is no evidence from controlled studies that selegiline has any beneficial effect in the absence of concurrent levodopa therapy. Evidence supporting this claim was obtained in randomized controlled clinical investigations that compared the effects of added selegiline or placebo in patients receiving levodopa/carbidopa. Selegiline was significantly superior to placebo on all three principal outcome measures employed: change from baseline in daily levodopa/carbidopa dose, the amount of 'off' time, and patient self-rating of treatment success. Beneficial effects were also observed on other measures of treatment success (e.g., measures of reduced end of dose akinesia, decreased tremor and sialorrhea, improved speech and dressing ability and improved overall disability as assessed by walking and comparison to previous state).",
"Description": "Selegiline hydrochloride, USP is a levorotatory acetylenic derivative of phenethylamine. It is commonly referred to in the clinical and pharmacological literature as l-deprenyl. The chemical name is: (R)-(-)-N,2-dimethyl-N-2-propynylphenethylamine hydrochloride. It is a white to near white crystalline powder, freely soluble in water, chloroform, and methanol, and has a molecular weight of 223.75. The molecular formula is C13H17N.HCI and the structural formula is as follows. Each hard gelatin capsule with white opaque cap and white opaque body imprinted \"Novitium 5 mg\" on the body and \"504\" on the cap in red ink containing white to off-white powder. Each capsule contains 5 mg selegiline hydrochloride, USP. Inactive ingredients are citric acid anhydrous, lactose monohydrate, magnesium stearate and microcrystalline cellulose. The capsule shells contain gelatin and titanium dioxide and are imprinted with red ink. The imprinting ink contains shellac, alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, sodium hydroxide, titanium dioxide, povidone and FD&C Red #40 Aluminum Lake."
},
{
"NDCCode": "70979-504-01",
"PackageDescription": "20 kg in 1 BOX (70979-504-01) ",
"NDC11Code": "70979-0504-01",
"ProductNDC": "70979-504",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240304",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "K.S.PEARL CO., LTD.",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "19.2",
"StrengthUnit": "kg/20kg",
"Status": "Unfinished",
"LastUpdate": "2024-03-05",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "04-MAR-24"
},
{
"NDCCode": "71384-504-03",
"PackageDescription": "20 BOTTLE, DROPPER in 1 BOX (71384-504-03) > 3.5 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "71384-0504-03",
"ProductNDC": "71384-504",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pred-gati-brom",
"NonProprietaryName": "Prednisolone Acetate-gatifloxacin-bromfenac",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20180105",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Imprims NJOF, LLC",
"SubstanceName": "BROMFENAC; GATIFLOXACIN; PREDNISOLONE ACETATE",
"StrengthNumber": ".75; 5; 10",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC],Quinolone Antimicrobial [EPC],Quinolones [CS],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180105",
"SamplePackage": "N"
},
{
"NDCCode": "85844-504-02",
"PackageDescription": "20 PATCH in 1 CANISTER (85844-504-02) / 25 mL in 1 PATCH (85844-504-01) ",
"NDC11Code": "85844-0504-02",
"ProductNDC": "85844-504",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Moutain Dew Hand Sanitizing Wipes",
"NonProprietaryName": "Hand Sanitizing Wipes",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260601",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Zhejiang Bright Care Co., Ltd",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "13",
"StrengthUnit": "mg/10mL",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260601",
"SamplePackage": "Y",
"IndicationAndUsage": "To decrease bacteria on the skin. Recommended for repeated use."
},
{
"NDCCode": "65219-029-20",
"PackageDescription": "1 VIAL in 1 CARTON (65219-029-20) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "65219-0029-20",
"ProductNDC": "65219-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Thiotepa",
"NonProprietaryName": "Thiotepa",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVITARY; INTRAVENOUS; INTRAVESICAL",
"StartMarketingDate": "20220411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214222",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "THIOTEPA",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2022-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220411",
"SamplePackage": "N",
"IndicationAndUsage": "Thiotepa for injection is an alkylating drug indicated: For treatment of adenocarcinoma of the breast or ovary. (1.2) For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. (1.3) For treatment of superficial papillary carcinoma of the urinary bladder. (1.4).",
"Description": "Thiotepa is an alkylating agent. Thiotepa for injection, USP is supplied as a non-pyrogenic, sterile lyophilized white powder for intravenous, intracavitary, or intravesical use after reconstitution and dilution. Thiotepa for Injection, USP is available in a single-dose vial containing. 100 mg thiotepa. After reconstitution with 10 ml of water for injection, each ml contains 10 mg thiotepa. Thiotepa is a synthetic product with antitumor activity. The chemical name for thiotepa is Tris(1-aziridinyl)phosphine sulfide. Thiotepa has the following structural formula. Thiotepa, USP has the molecular formula C6H12N3PS, and a molecular weight of 189.23, and it appears as fine, white crystalline flakes, with a melting range of 52°C to 57°C. It is soluble in water and organic solvents. When reconstituted with sterile water for injection, the resulting solution has a pH of approximately 5.5 to 7.5. Thiotepa is unstable in acid medium."
},
{
"NDCCode": "65219-086-20",
"PackageDescription": "10 CARTON in 1 BOX (65219-086-20) / 1 VIAL in 1 CARTON (65219-086-01) / 20 mL in 1 VIAL",
"NDC11Code": "65219-0086-20",
"ProductNDC": "65219-086",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gadoterate Meglumine",
"NonProprietaryName": "Gadoterate Meglumine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220620",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215304",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "GADOTERATE MEGLUMINE",
"StrengthNumber": "376.9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220620",
"SamplePackage": "N",
"IndicationAndUsage": "Gadoterate Meglumine Injection is a gadolinium-based contrast agent indicated for intravenous use with magnetic resonance imaging (MRI) in brain (intracranial), spine and associated tissues in adult and pediatric patients (including term neonates) to detect and visualize areas with disruption of the blood brain barrier (BBB) and/or abnormal vascularity.",
"Description": "Gadoterate Meglumine Injection, USP is a paramagnetic macrocyclic ionic contrast agent administered for magnetic resonance imaging. The chemical name for gadoterate meglumine is D-glucitol, 1-deoxy-1-(methylamino)-,[1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraaceto(4-)-.kappa.N1, .kappa.N4, .kappa.N7, .kappa.N10, .kappa.O1, .kappa.O4, .kappa.O7, .kappa.O10]gadolinate(1-)(1:1); it has a formula weight of 753.9 g/mol and empirical formula of C23H42O13N5Gd (anhydrous basis). The structural formula of gadoterate meglumine in solution is as follows. CAS Registry No. 92943-93-6. Gadoterate Meglumine Injection, USP is a sterile, nonpyrogenic, clear, colorless to yellow, aqueous solution of 0.5 mmol per mL of gadoterate meglumine. No preservative is added. Each mL of Gadoterate Meglumine Injection, USP contains 376.9 mg of gadoterate meglumine, 0.25 mg of DOTA and water for injection. Gadoterate Meglumine Injection USP has a pH of 6.5 to 8.0. The main physiochemical properties of Gadoterate Meglumine Injection, USP are provided below. The thermodynamic stability constants for gadoterate (log Ktherm and log Kcond at pH 7.4) are 25.6 and 19.3, respectively."
},
{
"NDCCode": "65219-131-20",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (65219-131-20) / 50 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "65219-0131-20",
"ProductNDC": "65219-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20231117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204555",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Status": "Active",
"LastUpdate": "2024-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231117",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. .",
"Description": "Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino] tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is for intravenous or oral use, it has no inactive ingredients. When reconstituted in water Cyclophosphamide for Injection, USP has a pH range of 3.0 to 9.0. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide."
},
{
"NDCCode": "65219-133-20",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (65219-133-20) / 100 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "65219-0133-20",
"ProductNDC": "65219-133",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20231117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204555",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2024-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231117",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. .",
"Description": "Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino] tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is for intravenous or oral use, it has no inactive ingredients. When reconstituted in water Cyclophosphamide for Injection, USP has a pH range of 3.0 to 9.0. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide."
},
{
"NDCCode": "65219-135-20",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (65219-135-20) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "65219-0135-20",
"ProductNDC": "65219-135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20231117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204555",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Status": "Active",
"LastUpdate": "2024-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231117",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. .",
"Description": "Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino] tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is for intravenous or oral use, it has no inactive ingredients. When reconstituted in water Cyclophosphamide for Injection, USP has a pH range of 3.0 to 9.0. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide."
},
{
"NDCCode": "65219-150-75",
"PackageDescription": "20 BAG in 1 CASE (65219-150-75) / 500 mL in 1 BAG (65219-150-00) ",
"NDC11Code": "65219-0150-75",
"ProductNDC": "65219-150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220826",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213523",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "25; 2.25; .745",
"StrengthUnit": "g/500mL; g/500mL; g/500mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221011",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "65219-151-75",
"PackageDescription": "20 BAG in 1 CASE (65219-151-75) / 500 mL in 1 BAG (65219-151-00) ",
"NDC11Code": "65219-0151-75",
"ProductNDC": "65219-151",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220902",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212348",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 2.25; 1.49",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220902",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "65219-184-20",
"PackageDescription": "10 VIAL in 1 TRAY (65219-184-20) / 20 mL in 1 VIAL (65219-184-01) ",
"NDC11Code": "65219-0184-20",
"ProductNDC": "65219-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketamine Hydrochloride",
"NonProprietaryName": "Ketamine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230710",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215808",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "KETAMINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2025-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230710",
"SamplePackage": "N",
"IndicationAndUsage": "Ketamine Hydrochloride Injection is indicated: : 1 as the sole anesthetic agent for diagnostic and surgical procedures that do not require skeletal muscle relaxation. , 2 for the induction of anesthesia prior to the administration of other general anesthetic agents. , 3 as a supplement to other anesthetic agents. .",
"Description": "Ketamine Hydrochloride Injection, USP, for intravenous or intramuscular use, contains ketamine, a nonbarbiturate general anesthetic. Ketamine Hydrochloride, USP is a white crystalline powder and has a molecular formula of C13H16ClNOHCl and a molecular weight of 274.19. The chemical name for ketamine hydrochloride is (±)-2-(o-Chlorophenyl)-2-(methylamino)cyclohexanone hydrochloride. The chemical structure of ketamine hydrochloride is:. It is formulated as a slightly acidic (pH 3.5-5.5) sterile solution for intravenous or intramuscular injection. Each milliliter (mL) of the multiple-dose vials contain either 10 mg ketamine base (equivalent to 11.53 mg ketamine hydrochloride) or 50 mg ketamine base (equivalent to 57.67 mg ketamine hydrochloride) or 100 mg ketamine base (equivalent to 115.33 mg ketamine hydrochloride) and not more than 0.10 mg/mL benzethonium chloride added as a preservative in water for injection. The 10 mg/mL solution has been made isotonic with 6.60 mg sodium chloride."
},
{
"NDCCode": "65219-190-30",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (65219-190-30) / 20 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "65219-0190-30",
"ProductNDC": "65219-190",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Voriconazole",
"NonProprietaryName": "Voriconazole",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211099",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VORICONAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201201",
"SamplePackage": "N",
"IndicationAndUsage": "Voriconazole for injection is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: : 1 Invasive aspergillosis (1.1) , 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2) , 3 Esophageal candidiasis (1.3) , 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani, in patients intolerant of, or refractory to, other therapy (1.4) .",
"Description": "Voriconazole, an azole antifungal agent is available as a lyophilized powder for solution for intravenous infusion. The structural formula is:. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4-triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.3. Voriconazole drug substance is a white to light-colored powder. Voriconazole for injection is a white lyophilized powder containing nominally 200 mg voriconazole and 3200 mg sulfobutyl ether beta-cyclodextrin sodium in a 30 mL Type I clear glass vial. Voriconazole for injection is intended for administration by intravenous infusion. It is a single-dose, unpreserved product. Vials containing 200 mg lyophilized voriconazole are intended for reconstitution with Water for Injection to produce a solution containing 10 mg/mL voriconazole and 160 mg/mL of sulfobutyl ether beta-cyclodextrin sodium. The resultant solution is further diluted prior to administration as an intravenous infusion [see Dosage and Administration (2)]."
},
{
"NDCCode": "65219-204-20",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (65219-204-20) / 20 mL in 1 VIAL, SINGLE-DOSE (65219-204-01) ",
"NDC11Code": "65219-0204-20",
"ProductNDC": "65219-204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214677",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-02-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220725",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide Injection is indicated for: 1 Treatment of partial-onset seizures in patients 17 years of age and older (1.1).",
"Description": "The chemical name of lacosamide is (R)-2-Acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide, USP is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is freely soluble in methanol, soluble in anhydrous ethanol, sparingly soluble in water, slightly soluble in acetonitrile, and practically insoluble in heptane."
},
{
"NDCCode": "65219-224-50",
"PackageDescription": "20 BAG in 1 CASE (65219-224-50) / 500 mL in 1 BAG (65219-224-01) ",
"NDC11Code": "65219-0224-50",
"ProductNDC": "65219-224",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207310",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211117",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.",
"Description": "0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex®+ bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "65219-232-50",
"PackageDescription": "20 BAG in 1 CASE (65219-232-50) / 500 mL in 1 BAG (65219-232-01) ",
"NDC11Code": "65219-0232-50",
"ProductNDC": "65219-232",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180723",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208122",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "2250",
"StrengthUnit": "mg/500mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211130",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.",
"Description": "0.45% Sodium Chloride Injection, USP solution is a sterile and nonpyrogenic solution intended for intravenous administration. Each 100 mL of 0.45% Sodium Chloride Injection, USP contains 450 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 0.45% Sodium Chloride Injection, USP is a parenteral fluid and electrolyte replenisher. Sodium chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H 2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex® bag). The freeflex® + bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "65219-240-50",
"PackageDescription": "20 BAG in 1 CASE (65219-240-50) / 500 mL in 1 BAG (65219-240-01) ",
"NDC11Code": "65219-0240-50",
"ProductNDC": "65219-240",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20161021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207449",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "25000",
"StrengthUnit": "mg/500mL",
"Status": "Active",
"LastUpdate": "2025-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211110",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.",
"Description": "5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C 6H 12O 6 H 2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex® + bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "65219-243-50",
"PackageDescription": "20 BAG in 1 CASE (65219-243-50) / 500 mL in 1 BAG (65219-243-01) ",
"NDC11Code": "65219-0243-50",
"ProductNDC": "65219-243",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactated Ringers And Dextrose",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride, And Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210332",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE MONOHYDRATE",
"StrengthNumber": "600; 310; 30; 20; 5",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221222",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated for parenteral replacement of extracellular losses of fluid and electrolytes, with minimal carbohydrate calories, as required by the clinical condition of the patient.",
"Description": "The product is sterile, nonpyrogenic solution containing isotonic concentration of electrolytes with dextrose in water for injection. The solutions containing dextrose and electrolytes are hypertonic. They are administered by intravenous infusion for parenteral replacement of extracellular losses of fluid and electrolytes, with minimal carbohydrate calories. Each 100 mL of Lactated Ringer's and 5% Dextrose Injection, USP contains dextrose, hydrous 5 g, sodium chloride 600 mg, sodium lactate, anhydrous 310 mg, potassium chloride 30 mg and calcium chloride, dihydrate 20 mg. Contains only hydrochloric acid for pH adjustment. A liter provides 179 calories (from dextrose and lactate), sodium (Na+), 130 mEq, potassium (K+) 4 mEq, calcium (Ca++) 3 mEq, chloride (Cl−) 109 mEq and lactate [CH3CH(OH) COO−] 28 mEq and has a hypertonic osmolar concentration of 525 mOsmol (calc.). The pH is 4.9 (4.0 − 6.5). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. This solution is a parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Calcium Chloride, USP is chemically designated calcium chloride dihydrate (CaCl2 2 H2O), white fragments or granules freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Sodium Lactate, USP is chemically designated monosodium lactate [CH3CH(OH)COONa], a 50% aqueous solution miscible in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers."
},
{
"NDCCode": "65219-259-45",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (65219-259-45) / 20 mL in 1 VIAL, SINGLE-USE (65219-259-05) ",
"NDC11Code": "65219-0259-45",
"ProductNDC": "65219-259",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180518",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203719",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "4; .5",
"StrengthUnit": "g/20mL; g/20mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180518",
"SamplePackage": "N",
"IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .",
"Description": "Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. : 1 Each Piperacillin and Tazobactam for Injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. , 2 Each Piperacillin and Tazobactam for Injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. , 3 Each Piperacillin and Tazobactam for Injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam."
},
{
"NDCCode": "65219-259-55",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (65219-259-55) > 20 mL in 1 VIAL, SINGLE-USE (65219-259-15) ",
"NDC11Code": "65219-0259-55",
"ProductNDC": "65219-259",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203719",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "4; .5",
"StrengthUnit": "g/20mL; g/20mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210524",
"SamplePackage": "N",
"IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .",
"Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. : 1 Each Piperacillin and Tazobactam for Injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. , 2 Each Piperacillin and Tazobactam for Injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. , 3 Each Piperacillin and Tazobactam for Injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. ."
},
{
"NDCCode": "65219-296-20",
"PackageDescription": "10 BAG in 1 CASE (65219-296-20) / 200 mL in 1 BAG (65219-296-01) ",
"NDC11Code": "65219-0296-20",
"ProductNDC": "65219-296",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nicardipine Hydrochloride",
"NonProprietaryName": "Nicardipine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20261001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219334",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "NICARDIPINE HYDROCHLORIDE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20261001",
"SamplePackage": "N",
"IndicationAndUsage": "Nicardipine Hydrochloride Injection is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible.",
"Description": "Nicardipine hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2, 6-dimethyl-4- (m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure. Nicardipine hydrochloride is a yellow to pale yellow, odorless, crystalline powder that has a melting point range of 165-170◦ C. It is soluble in methanol, sparingly soluble in ethanol, slightly soluble in acetone, chloroform and water. It has a molecular weight of 515.99. Nicardipine Hydrochloride in 0.9% Sodium Chloride Injection is available as a single-use, ready-to-use, iso-osmotic, clear, colorless to yellow solution for intravenous administration in a 200 mL single-dose flexible container. Each mL contains 0.1 mg or 0.2 mg nicardipine hydrochloride in 9 mg Sodium Chloride, USP. Hydrochloric acid (q.s.) may have been added to adjust pH to 3 to 5."
},
{
"NDCCode": "65219-298-20",
"PackageDescription": "10 BAG in 1 CASE (65219-298-20) / 200 mL in 1 BAG (65219-298-01) ",
"NDC11Code": "65219-0298-20",
"ProductNDC": "65219-298",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nicardipine Hydrochloride",
"NonProprietaryName": "Nicardipine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20261001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219334",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "NICARDIPINE HYDROCHLORIDE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20261001",
"SamplePackage": "N",
"IndicationAndUsage": "Nicardipine Hydrochloride Injection is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible.",
"Description": "Nicardipine hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2, 6-dimethyl-4- (m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure. Nicardipine hydrochloride is a yellow to pale yellow, odorless, crystalline powder that has a melting point range of 165-170◦ C. It is soluble in methanol, sparingly soluble in ethanol, slightly soluble in acetone, chloroform and water. It has a molecular weight of 515.99. Nicardipine Hydrochloride in 0.9% Sodium Chloride Injection is available as a single-use, ready-to-use, iso-osmotic, clear, colorless to yellow solution for intravenous administration in a 200 mL single-dose flexible container. Each mL contains 0.1 mg or 0.2 mg nicardipine hydrochloride in 9 mg Sodium Chloride, USP. Hydrochloric acid (q.s.) may have been added to adjust pH to 3 to 5."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>65219-504-20</NDCCode>
<PackageDescription>5 BAG in 1 CASE (65219-504-20) / 2000 mL in 1 BAG (65219-504-02) </PackageDescription>
<NDC11Code>65219-0504-20</NDC11Code>
<ProductNDC>65219-504</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>20251219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213688</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>.9</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>0.9% Sodium Chloride Irrigation is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of a sterile, nonpyrogenic electrolyte solution.</IndicationAndUsage>
<Description>Each 100 mL contains. Sodium Chloride, USP 0.9 g; Water for Injection, USP qs pH adjusted with Hydrochloric Acid, NF. pH: 5.75 (4.50-7.00). Calculated Osmolarity: 308 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154. 0.9% Sodium Chloride Irrigation, USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is. The flexible plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers. The solution contact layer is a copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. Not made with natural rubber latex, PVC or DEHP.</Description>
</NDC>
<NDC>
<NDCCode>42961-504-30</NDCCode>
<PackageDescription>20 POUCH in 1 BOX (42961-504-30) > 1 mL in 1 POUCH (42961-504-00)</PackageDescription>
<NDC11Code>42961-0504-30</NDC11Code>
<ProductNDC>42961-504</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Alcohol Wipe</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>SWAB</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140225</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part344</ApplicationNumber>
<LabelerName>Cintas Corporation</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>.7</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Uses. First aid to help prevent infection in minor cuts, scrapes, and burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43744-504-20</NDCCode>
<PackageDescription>15 g in 1 DRUM (43744-504-20)</PackageDescription>
<NDC11Code>43744-0504-20</NDC11Code>
<ProductNDC>43744-504</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Iron Sucrose</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20100720</StartMarketingDate>
<EndMarketingDate>20100811</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>IRON SUCROSE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20100811</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43744-504-22</NDCCode>
<PackageDescription>20 g in 1 DRUM (43744-504-22)</PackageDescription>
<NDC11Code>43744-0504-22</NDC11Code>
<ProductNDC>43744-504</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Iron Sucrose</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20100720</StartMarketingDate>
<EndMarketingDate>20100811</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>IRON SUCROSE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20100811</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51790-504-01</NDCCode>
<PackageDescription>20 mL in 1 BOTTLE, SPRAY (51790-504-01) </PackageDescription>
<NDC11Code>51790-0504-01</NDC11Code>
<ProductNDC>51790-504</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Breathable Camouflage Light Caramel</ProprietaryName>
<NonProprietaryName>Titanium Dioxide And Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20171223</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Quura Medical B.V</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>65; 82</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>52962-504-20</NDCCode>
<PackageDescription>20 kg in 1 DRUM (52962-504-20)</PackageDescription>
<NDC11Code>52962-0504-20</NDC11Code>
<ProductNDC>52962-504</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Penicillin G Procaine</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19970820</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>CSPC Zhongnuo Pharmaceutical (Shijiazhuang) Co., Ltd.</LabelerName>
<SubstanceName>PENICILLIN G PROCAINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55316-504-60</NDCCode>
<PackageDescription>20 BLISTER PACK in 1 CARTON (55316-504-60) > 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55316-0504-60</NDC11Code>
<ProductNDC>55316-504</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Healthy Accents Congestion Relief</ProprietaryName>
<NonProprietaryName>Ibuprofen, Phenylephrine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203200</ApplicationNumber>
<LabelerName>DZA Brands LLC</LabelerName>
<SubstanceName>IBUPROFEN; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200; 10</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-11-29</LastUpdate>
</NDC>
<NDC>
<NDCCode>68083-504-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68083-504-10) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>68083-0504-10</NDC11Code>
<ProductNDC>68083-504</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketamine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ketamine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216809</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>KETAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ketamine hydrochloride injection is indicated: as the sole anesthetic agent for diagnostic and surgical procedures that do not require skeletal muscle relaxation. for the induction of anesthesia prior to the administration of other general anesthetic agents. as a supplement to other anesthetic agents.</IndicationAndUsage>
<Description>Ketamine hydrochloride injection, USP for intravenous or intramuscular use, contains ketamine, a nonbarbiturate general anesthetic. Ketamine hydrochloride, USP is a white or almost white, crystalline powder and has a molecular formula of C13H16ClNOHCl and a molecular weight of 274.19. The chemical name for ketamine hydrochloride is 2-(2-chlorophenyl)-2-(methylamino)cyclohexan-1-one hydrochloride. The chemical structure of ketamine hydrochloride is. It is formulated as a slightly acidic (pH 3.5-5.5) sterile solution for intravenous or intramuscular injection. Each milliliter (mL) of the multiple-dose vials contain either 10 mg ketamine base (equivalent to 11.53 mg ketamine hydrochloride), 50 mg ketamine base (equivalent to 57.67 mg ketamine hydrochloride) or 100 mg ketamine base (equivalent to 115.33 mg ketamine hydrochloride) and not more than 0.10 mg/mL benzethonium chloride added as a preservative in water for injection. The 10 mg/mL solution has been made isotonic with 6.60 mg sodium chloride.</Description>
</NDC>
<NDC>
<NDCCode>70954-504-20</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (70954-504-20) </PackageDescription>
<NDC11Code>70954-0504-20</NDC11Code>
<ProductNDC>70954-504</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Selegiline Hydrochloride</ProprietaryName>
<NonProprietaryName>Selegiline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075352</ApplicationNumber>
<LabelerName>Novitium Pharma LLC</LabelerName>
<SubstanceName>SELEGILINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA], Monoamine Oxidase Type B Inhibitor [EPC], Monoamine Oxidase-B Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Selegiline hydrochloride capsules, USP are indicated as an adjunct in the management of Parkinsonian patients being treated with levodopa/carbidopa who exhibit deterioration in the quality of their response to this therapy. There is no evidence from controlled studies that selegiline has any beneficial effect in the absence of concurrent levodopa therapy. Evidence supporting this claim was obtained in randomized controlled clinical investigations that compared the effects of added selegiline or placebo in patients receiving levodopa/carbidopa. Selegiline was significantly superior to placebo on all three principal outcome measures employed: change from baseline in daily levodopa/carbidopa dose, the amount of 'off' time, and patient self-rating of treatment success. Beneficial effects were also observed on other measures of treatment success (e.g., measures of reduced end of dose akinesia, decreased tremor and sialorrhea, improved speech and dressing ability and improved overall disability as assessed by walking and comparison to previous state).</IndicationAndUsage>
<Description>Selegiline hydrochloride, USP is a levorotatory acetylenic derivative of phenethylamine. It is commonly referred to in the clinical and pharmacological literature as l-deprenyl. The chemical name is: (R)-(-)-N,2-dimethyl-N-2-propynylphenethylamine hydrochloride. It is a white to near white crystalline powder, freely soluble in water, chloroform, and methanol, and has a molecular weight of 223.75. The molecular formula is C13H17N.HCI and the structural formula is as follows. Each hard gelatin capsule with white opaque cap and white opaque body imprinted "Novitium 5 mg" on the body and "504" on the cap in red ink containing white to off-white powder. Each capsule contains 5 mg selegiline hydrochloride, USP. Inactive ingredients are citric acid anhydrous, lactose monohydrate, magnesium stearate and microcrystalline cellulose. The capsule shells contain gelatin and titanium dioxide and are imprinted with red ink. The imprinting ink contains shellac, alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, sodium hydroxide, titanium dioxide, povidone and FD&C Red #40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>70979-504-01</NDCCode>
<PackageDescription>20 kg in 1 BOX (70979-504-01) </PackageDescription>
<NDC11Code>70979-0504-01</NDC11Code>
<ProductNDC>70979-504</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240304</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>K.S.PEARL CO., LTD.</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>19.2</StrengthNumber>
<StrengthUnit>kg/20kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-03-05</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>04-MAR-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71384-504-03</NDCCode>
<PackageDescription>20 BOTTLE, DROPPER in 1 BOX (71384-504-03) > 3.5 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>71384-0504-03</NDC11Code>
<ProductNDC>71384-504</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pred-gati-brom</ProprietaryName>
<NonProprietaryName>Prednisolone Acetate-gatifloxacin-bromfenac</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20180105</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Imprims NJOF, LLC</LabelerName>
<SubstanceName>BROMFENAC; GATIFLOXACIN; PREDNISOLONE ACETATE</SubstanceName>
<StrengthNumber>.75; 5; 10</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC],Quinolone Antimicrobial [EPC],Quinolones [CS],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>85844-504-02</NDCCode>
<PackageDescription>20 PATCH in 1 CANISTER (85844-504-02) / 25 mL in 1 PATCH (85844-504-01) </PackageDescription>
<NDC11Code>85844-0504-02</NDC11Code>
<ProductNDC>85844-504</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Moutain Dew Hand Sanitizing Wipes</ProprietaryName>
<NonProprietaryName>Hand Sanitizing Wipes</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Zhejiang Bright Care Co., Ltd</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>13</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260601</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>To decrease bacteria on the skin. Recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65219-029-20</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (65219-029-20) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>65219-0029-20</NDC11Code>
<ProductNDC>65219-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Thiotepa</ProprietaryName>
<NonProprietaryName>Thiotepa</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVITARY; INTRAVENOUS; INTRAVESICAL</RouteName>
<StartMarketingDate>20220411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214222</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>THIOTEPA</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Thiotepa for injection is an alkylating drug indicated: For treatment of adenocarcinoma of the breast or ovary. (1.2) For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. (1.3) For treatment of superficial papillary carcinoma of the urinary bladder. (1.4).</IndicationAndUsage>
<Description>Thiotepa is an alkylating agent. Thiotepa for injection, USP is supplied as a non-pyrogenic, sterile lyophilized white powder for intravenous, intracavitary, or intravesical use after reconstitution and dilution. Thiotepa for Injection, USP is available in a single-dose vial containing. 100 mg thiotepa. After reconstitution with 10 ml of water for injection, each ml contains 10 mg thiotepa. Thiotepa is a synthetic product with antitumor activity. The chemical name for thiotepa is Tris(1-aziridinyl)phosphine sulfide. Thiotepa has the following structural formula. Thiotepa, USP has the molecular formula C6H12N3PS, and a molecular weight of 189.23, and it appears as fine, white crystalline flakes, with a melting range of 52°C to 57°C. It is soluble in water and organic solvents. When reconstituted with sterile water for injection, the resulting solution has a pH of approximately 5.5 to 7.5. Thiotepa is unstable in acid medium.</Description>
</NDC>
<NDC>
<NDCCode>65219-086-20</NDCCode>
<PackageDescription>10 CARTON in 1 BOX (65219-086-20) / 1 VIAL in 1 CARTON (65219-086-01) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>65219-0086-20</NDC11Code>
<ProductNDC>65219-086</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gadoterate Meglumine</ProprietaryName>
<NonProprietaryName>Gadoterate Meglumine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220620</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215304</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>GADOTERATE MEGLUMINE</SubstanceName>
<StrengthNumber>376.9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gadoterate Meglumine Injection is a gadolinium-based contrast agent indicated for intravenous use with magnetic resonance imaging (MRI) in brain (intracranial), spine and associated tissues in adult and pediatric patients (including term neonates) to detect and visualize areas with disruption of the blood brain barrier (BBB) and/or abnormal vascularity.</IndicationAndUsage>
<Description>Gadoterate Meglumine Injection, USP is a paramagnetic macrocyclic ionic contrast agent administered for magnetic resonance imaging. The chemical name for gadoterate meglumine is D-glucitol, 1-deoxy-1-(methylamino)-,[1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraaceto(4-)-.kappa.N1, .kappa.N4, .kappa.N7, .kappa.N10, .kappa.O1, .kappa.O4, .kappa.O7, .kappa.O10]gadolinate(1-)(1:1); it has a formula weight of 753.9 g/mol and empirical formula of C23H42O13N5Gd (anhydrous basis). The structural formula of gadoterate meglumine in solution is as follows. CAS Registry No. 92943-93-6. Gadoterate Meglumine Injection, USP is a sterile, nonpyrogenic, clear, colorless to yellow, aqueous solution of 0.5 mmol per mL of gadoterate meglumine. No preservative is added. Each mL of Gadoterate Meglumine Injection, USP contains 376.9 mg of gadoterate meglumine, 0.25 mg of DOTA and water for injection. Gadoterate Meglumine Injection USP has a pH of 6.5 to 8.0. The main physiochemical properties of Gadoterate Meglumine Injection, USP are provided below. The thermodynamic stability constants for gadoterate (log Ktherm and log Kcond at pH 7.4) are 25.6 and 19.3, respectively.</Description>
</NDC>
<NDC>
<NDCCode>65219-131-20</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (65219-131-20) / 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>65219-0131-20</NDC11Code>
<ProductNDC>65219-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20231117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204555</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231117</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. .</IndicationAndUsage>
<Description>Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino] tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is for intravenous or oral use, it has no inactive ingredients. When reconstituted in water Cyclophosphamide for Injection, USP has a pH range of 3.0 to 9.0. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide.</Description>
</NDC>
<NDC>
<NDCCode>65219-133-20</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (65219-133-20) / 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>65219-0133-20</NDC11Code>
<ProductNDC>65219-133</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20231117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204555</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231117</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. .</IndicationAndUsage>
<Description>Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino] tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is for intravenous or oral use, it has no inactive ingredients. When reconstituted in water Cyclophosphamide for Injection, USP has a pH range of 3.0 to 9.0. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide.</Description>
</NDC>
<NDC>
<NDCCode>65219-135-20</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (65219-135-20) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>65219-0135-20</NDC11Code>
<ProductNDC>65219-135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20231117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204555</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231117</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. .</IndicationAndUsage>
<Description>Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino] tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is for intravenous or oral use, it has no inactive ingredients. When reconstituted in water Cyclophosphamide for Injection, USP has a pH range of 3.0 to 9.0. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide.</Description>
</NDC>
<NDC>
<NDCCode>65219-150-75</NDCCode>
<PackageDescription>20 BAG in 1 CASE (65219-150-75) / 500 mL in 1 BAG (65219-150-00) </PackageDescription>
<NDC11Code>65219-0150-75</NDC11Code>
<ProductNDC>65219-150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220826</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213523</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>25; 2.25; .745</StrengthNumber>
<StrengthUnit>g/500mL; g/500mL; g/500mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>65219-151-75</NDCCode>
<PackageDescription>20 BAG in 1 CASE (65219-151-75) / 500 mL in 1 BAG (65219-151-00) </PackageDescription>
<NDC11Code>65219-0151-75</NDC11Code>
<ProductNDC>65219-151</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220902</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212348</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 2.25; 1.49</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220902</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>65219-184-20</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (65219-184-20) / 20 mL in 1 VIAL (65219-184-01) </PackageDescription>
<NDC11Code>65219-0184-20</NDC11Code>
<ProductNDC>65219-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketamine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ketamine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230710</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215808</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>KETAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ketamine Hydrochloride Injection is indicated: : 1 as the sole anesthetic agent for diagnostic and surgical procedures that do not require skeletal muscle relaxation. , 2 for the induction of anesthesia prior to the administration of other general anesthetic agents. , 3 as a supplement to other anesthetic agents. .</IndicationAndUsage>
<Description>Ketamine Hydrochloride Injection, USP, for intravenous or intramuscular use, contains ketamine, a nonbarbiturate general anesthetic. Ketamine Hydrochloride, USP is a white crystalline powder and has a molecular formula of C13H16ClNOHCl and a molecular weight of 274.19. The chemical name for ketamine hydrochloride is (±)-2-(o-Chlorophenyl)-2-(methylamino)cyclohexanone hydrochloride. The chemical structure of ketamine hydrochloride is:. It is formulated as a slightly acidic (pH 3.5-5.5) sterile solution for intravenous or intramuscular injection. Each milliliter (mL) of the multiple-dose vials contain either 10 mg ketamine base (equivalent to 11.53 mg ketamine hydrochloride) or 50 mg ketamine base (equivalent to 57.67 mg ketamine hydrochloride) or 100 mg ketamine base (equivalent to 115.33 mg ketamine hydrochloride) and not more than 0.10 mg/mL benzethonium chloride added as a preservative in water for injection. The 10 mg/mL solution has been made isotonic with 6.60 mg sodium chloride.</Description>
</NDC>
<NDC>
<NDCCode>65219-190-30</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (65219-190-30) / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>65219-0190-30</NDC11Code>
<ProductNDC>65219-190</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Voriconazole</ProprietaryName>
<NonProprietaryName>Voriconazole</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211099</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VORICONAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Voriconazole for injection is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: : 1 Invasive aspergillosis (1.1) , 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2) , 3 Esophageal candidiasis (1.3) , 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani, in patients intolerant of, or refractory to, other therapy (1.4) .</IndicationAndUsage>
<Description>Voriconazole, an azole antifungal agent is available as a lyophilized powder for solution for intravenous infusion. The structural formula is:. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4-triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.3. Voriconazole drug substance is a white to light-colored powder. Voriconazole for injection is a white lyophilized powder containing nominally 200 mg voriconazole and 3200 mg sulfobutyl ether beta-cyclodextrin sodium in a 30 mL Type I clear glass vial. Voriconazole for injection is intended for administration by intravenous infusion. It is a single-dose, unpreserved product. Vials containing 200 mg lyophilized voriconazole are intended for reconstitution with Water for Injection to produce a solution containing 10 mg/mL voriconazole and 160 mg/mL of sulfobutyl ether beta-cyclodextrin sodium. The resultant solution is further diluted prior to administration as an intravenous infusion [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>65219-204-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (65219-204-20) / 20 mL in 1 VIAL, SINGLE-DOSE (65219-204-01) </PackageDescription>
<NDC11Code>65219-0204-20</NDC11Code>
<ProductNDC>65219-204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214677</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide Injection is indicated for: 1 Treatment of partial-onset seizures in patients 17 years of age and older (1.1).</IndicationAndUsage>
<Description>The chemical name of lacosamide is (R)-2-Acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide, USP is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is freely soluble in methanol, soluble in anhydrous ethanol, sparingly soluble in water, slightly soluble in acetonitrile, and practically insoluble in heptane.</Description>
</NDC>
<NDC>
<NDCCode>65219-224-50</NDCCode>
<PackageDescription>20 BAG in 1 CASE (65219-224-50) / 500 mL in 1 BAG (65219-224-01) </PackageDescription>
<NDC11Code>65219-0224-50</NDC11Code>
<ProductNDC>65219-224</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207310</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211117</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex®+ bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>65219-232-50</NDCCode>
<PackageDescription>20 BAG in 1 CASE (65219-232-50) / 500 mL in 1 BAG (65219-232-01) </PackageDescription>
<NDC11Code>65219-0232-50</NDC11Code>
<ProductNDC>65219-232</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180723</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208122</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>2250</StrengthNumber>
<StrengthUnit>mg/500mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>0.45% Sodium Chloride Injection, USP solution is a sterile and nonpyrogenic solution intended for intravenous administration. Each 100 mL of 0.45% Sodium Chloride Injection, USP contains 450 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 0.45% Sodium Chloride Injection, USP is a parenteral fluid and electrolyte replenisher. Sodium chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H 2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex® bag). The freeflex® + bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>65219-240-50</NDCCode>
<PackageDescription>20 BAG in 1 CASE (65219-240-50) / 500 mL in 1 BAG (65219-240-01) </PackageDescription>
<NDC11Code>65219-0240-50</NDC11Code>
<ProductNDC>65219-240</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20161021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207449</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>25000</StrengthNumber>
<StrengthUnit>mg/500mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C 6H 12O 6 H 2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The freeflex® + bag has a needle-free injection port and can accept standard luer lock syringes to add medication. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>65219-243-50</NDCCode>
<PackageDescription>20 BAG in 1 CASE (65219-243-50) / 500 mL in 1 BAG (65219-243-01) </PackageDescription>
<NDC11Code>65219-0243-50</NDC11Code>
<ProductNDC>65219-243</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactated Ringers And Dextrose</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride, And Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210332</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>600; 310; 30; 20; 5</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated for parenteral replacement of extracellular losses of fluid and electrolytes, with minimal carbohydrate calories, as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>The product is sterile, nonpyrogenic solution containing isotonic concentration of electrolytes with dextrose in water for injection. The solutions containing dextrose and electrolytes are hypertonic. They are administered by intravenous infusion for parenteral replacement of extracellular losses of fluid and electrolytes, with minimal carbohydrate calories. Each 100 mL of Lactated Ringer's and 5% Dextrose Injection, USP contains dextrose, hydrous 5 g, sodium chloride 600 mg, sodium lactate, anhydrous 310 mg, potassium chloride 30 mg and calcium chloride, dihydrate 20 mg. Contains only hydrochloric acid for pH adjustment. A liter provides 179 calories (from dextrose and lactate), sodium (Na+), 130 mEq, potassium (K+) 4 mEq, calcium (Ca++) 3 mEq, chloride (Cl−) 109 mEq and lactate [CH3CH(OH) COO−] 28 mEq and has a hypertonic osmolar concentration of 525 mOsmol (calc.). The pH is 4.9 (4.0 − 6.5). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. This solution is a parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Calcium Chloride, USP is chemically designated calcium chloride dihydrate (CaCl2 2 H2O), white fragments or granules freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Sodium Lactate, USP is chemically designated monosodium lactate [CH3CH(OH)COONa], a 50% aqueous solution miscible in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>65219-259-45</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (65219-259-45) / 20 mL in 1 VIAL, SINGLE-USE (65219-259-05) </PackageDescription>
<NDC11Code>65219-0259-45</NDC11Code>
<ProductNDC>65219-259</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180518</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203719</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>4; .5</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .</IndicationAndUsage>
<Description>Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. : 1 Each Piperacillin and Tazobactam for Injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. , 2 Each Piperacillin and Tazobactam for Injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. , 3 Each Piperacillin and Tazobactam for Injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam.</Description>
</NDC>
<NDC>
<NDCCode>65219-259-55</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (65219-259-55) > 20 mL in 1 VIAL, SINGLE-USE (65219-259-15) </PackageDescription>
<NDC11Code>65219-0259-55</NDC11Code>
<ProductNDC>65219-259</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203719</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>4; .5</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .</IndicationAndUsage>
<Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. : 1 Each Piperacillin and Tazobactam for Injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. , 2 Each Piperacillin and Tazobactam for Injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. , 3 Each Piperacillin and Tazobactam for Injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. .</Description>
</NDC>
<NDC>
<NDCCode>65219-296-20</NDCCode>
<PackageDescription>10 BAG in 1 CASE (65219-296-20) / 200 mL in 1 BAG (65219-296-01) </PackageDescription>
<NDC11Code>65219-0296-20</NDC11Code>
<ProductNDC>65219-296</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
<NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20261001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219334</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20261001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nicardipine Hydrochloride Injection is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible.</IndicationAndUsage>
<Description>Nicardipine hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2, 6-dimethyl-4- (m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure. Nicardipine hydrochloride is a yellow to pale yellow, odorless, crystalline powder that has a melting point range of 165-170◦ C. It is soluble in methanol, sparingly soluble in ethanol, slightly soluble in acetone, chloroform and water. It has a molecular weight of 515.99. Nicardipine Hydrochloride in 0.9% Sodium Chloride Injection is available as a single-use, ready-to-use, iso-osmotic, clear, colorless to yellow solution for intravenous administration in a 200 mL single-dose flexible container. Each mL contains 0.1 mg or 0.2 mg nicardipine hydrochloride in 9 mg Sodium Chloride, USP. Hydrochloric acid (q.s.) may have been added to adjust pH to 3 to 5.</Description>
</NDC>
<NDC>
<NDCCode>65219-298-20</NDCCode>
<PackageDescription>10 BAG in 1 CASE (65219-298-20) / 200 mL in 1 BAG (65219-298-01) </PackageDescription>
<NDC11Code>65219-0298-20</NDC11Code>
<ProductNDC>65219-298</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
<NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20261001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219334</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20261001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nicardipine Hydrochloride Injection is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible.</IndicationAndUsage>
<Description>Nicardipine hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2, 6-dimethyl-4- (m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure. Nicardipine hydrochloride is a yellow to pale yellow, odorless, crystalline powder that has a melting point range of 165-170◦ C. It is soluble in methanol, sparingly soluble in ethanol, slightly soluble in acetone, chloroform and water. It has a molecular weight of 515.99. Nicardipine Hydrochloride in 0.9% Sodium Chloride Injection is available as a single-use, ready-to-use, iso-osmotic, clear, colorless to yellow solution for intravenous administration in a 200 mL single-dose flexible container. Each mL contains 0.1 mg or 0.2 mg nicardipine hydrochloride in 9 mg Sodium Chloride, USP. Hydrochloric acid (q.s.) may have been added to adjust pH to 3 to 5.</Description>
</NDC>
</NDCList>