{
"NDC": [
{
"NDCCode": "65219-645-09",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 TRAY (65219-645-09) / 9 mL in 1 VIAL, SINGLE-DOSE (65219-645-01) ",
"NDC11Code": "65219-0645-09",
"ProductNDC": "65219-645",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250505",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075761",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250505",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
"Description": "Amiodarone Hydrochloride Injection, USP contains amiodarone HCl (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone HCl is (2-butyl-3-benzo-furanyl)[4-[2- (diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone HCl has the following structural formula:. Amiodarone Hydrochloride Injection, USP is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection, USP is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone HCl, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection, USP contains polysorbate 80, which is known to leach di-(2- ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)]."
},
{
"NDCCode": "65219-052-29",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (65219-052-29) / 5 mL in 1 VIAL, SINGLE-DOSE (65219-052-09) ",
"NDC11Code": "65219-0052-29",
"ProductNDC": "65219-052",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200210",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212832",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200210",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "65219-054-29",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (65219-054-29) / 15 mL in 1 VIAL, SINGLE-DOSE (65219-054-09) ",
"NDC11Code": "65219-0054-29",
"ProductNDC": "65219-054",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200210",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212832",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200210",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "65219-056-29",
"PackageDescription": "25 VIAL in 1 TRAY (65219-056-29) / 50 mL in 1 VIAL (65219-056-09) ",
"NDC11Code": "65219-0056-29",
"ProductNDC": "65219-056",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200210",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212832",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200210",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "11673-645-09",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (11673-645-09) > 10 CAPSULE, COATED in 1 BLISTER PACK",
"NDC11Code": "11673-0645-09",
"ProductNDC": "11673-645",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pe Multi-stymptom Cold And Cough Relief",
"NonProprietaryName": "Acetaminophen, Dextromathorphan Hbr, Gauifenesin, Phenylephrine Hcl",
"DosageFormName": "CAPSULE, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070222",
"EndMarketingDate": "20181104",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Target Corporation",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 10; 100; 5",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-11-06",
"ProductNdcExcludeFlag": "N"
},
{
"NDCCode": "23155-645-09",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (23155-645-09) ",
"NDC11Code": "23155-0645-09",
"ProductNDC": "23155-645",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium",
"ProprietaryNameSuffix": "50 Mg",
"NonProprietaryName": "Losartan Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090382",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "LOSARTAN POTASSIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-04-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180104",
"SamplePackage": "N"
},
{
"NDCCode": "65162-645-09",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65162-645-09) ",
"NDC11Code": "65162-0645-09",
"ProductNDC": "65162-645",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Esomeprazole Magnesium",
"NonProprietaryName": "Esomeprazole Magnesium",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209647",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ESOMEPRAZOLE MAGNESIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190410",
"SamplePackage": "N",
"IndicationAndUsage": "Esomeprazole is a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).",
"Description": "The active ingredient in esomeprazole magnesium delayed-release capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R-isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2 Mg x 3H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium is supplied in delayed-release capsules. Each esomeprazole magnesium delayed-release capsule, USP contains 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate, USP) or 40 mg of esomeprazole (equivalent to 44.5 mg esomeprazole magnesium trihydrate, USP) in the form of enteric-coated granules with the following inactive ingredients: corn starch, gelatin, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion type C, mono- and di-glycerides, polysorbate 80, sodium lauryl sulfate, sucrose, talc, triethyl citrate and titanium dioxide. Each capsule shell is imprinted with blue pharmaceutical ink which contains: butyl alcohol, dehydrated alcohol, FD & C Blue # 2 aluminum lake, isopropyl alcohol, propylene glycol, shellac and strong ammonia solution. Meets USP Dissolution Test 2."
},
{
"NDCCode": "71919-645-09",
"PackageDescription": "50 mL in 1 BOTTLE, GLASS (71919-645-09) ",
"NDC11Code": "71919-0645-09",
"ProductNDC": "71919-645",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sterculia Acuminata",
"NonProprietaryName": "Cola Acuminata",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20100908",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "COLA ACUMINATA SEED",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100908",
"SamplePackage": "N"
},
{
"NDCCode": "65219-118-10",
"PackageDescription": "10 BAG in 1 CASE (65219-118-10) / 1000 mL in 1 BAG (65219-118-01) ",
"NDC11Code": "65219-0118-10",
"ProductNDC": "65219-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213445",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 9; 1.49",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220831",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "65219-119-10",
"PackageDescription": "10 BAG in 1 CASE (65219-119-10) / 1000 mL in 1 BAG (65219-119-01) ",
"NDC11Code": "65219-0119-10",
"ProductNDC": "65219-119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213445",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 9; 2.98",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220831",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "65219-140-04",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (65219-140-04) / 4 mL in 1 VIAL, SINGLE-DOSE (65219-140-02) ",
"NDC11Code": "65219-0140-04",
"ProductNDC": "65219-140",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Norepinephrine Bitartrate",
"NonProprietaryName": "Norepinephrine Bitartrate",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211382",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "NOREPINEPHRINE BITARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2023-06-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210301",
"SamplePackage": "N",
"IndicationAndUsage": "Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.",
"Description": "Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine Bitartrate Injection, USP is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula:. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is sparingly soluble in water, very slightly soluble in alcohol and ether, and readily soluble in acids. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 0.2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the vials has been displaced by nitrogen gas."
},
{
"NDCCode": "65219-142-10",
"PackageDescription": "10 BAG in 1 CASE (65219-142-10) / 1000 mL in 1 BAG (65219-142-02) ",
"NDC11Code": "65219-0142-10",
"ProductNDC": "65219-142",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220826",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213523",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 4.5; .745",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220826",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "65219-144-10",
"PackageDescription": "10 BAG in 1 CASE (65219-144-10) / 1000 mL in 1 BAG (65219-144-04) ",
"NDC11Code": "65219-0144-10",
"ProductNDC": "65219-144",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220826",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213523",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 4.5; 1.49",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220826",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "65219-146-10",
"PackageDescription": "10 BAG in 1 CASE (65219-146-10) / 1000 mL in 1 BAG (65219-146-06) ",
"NDC11Code": "65219-0146-10",
"ProductNDC": "65219-146",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220826",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213523",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 4.5; 2.24",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220826",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "65219-148-10",
"PackageDescription": "10 BAG in 1 CASE (65219-148-10) / 1000 mL in 1 BAG (65219-148-08) ",
"NDC11Code": "65219-0148-10",
"ProductNDC": "65219-148",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220826",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213523",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "50; 4.5; 2.98",
"StrengthUnit": "g/1000mL; g/1000mL; g/1000mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220826",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "65219-150-75",
"PackageDescription": "20 BAG in 1 CASE (65219-150-75) / 500 mL in 1 BAG (65219-150-00) ",
"NDC11Code": "65219-0150-75",
"ProductNDC": "65219-150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220826",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213523",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "25; 2.25; .745",
"StrengthUnit": "g/500mL; g/500mL; g/500mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221011",
"SamplePackage": "N",
"IndicationAndUsage": "These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.",
"Description": "Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "65219-162-10",
"PackageDescription": "24 BAG in 1 CASE (65219-162-10) / 50 mL in 1 BAG (65219-162-01) ",
"NDC11Code": "65219-0162-10",
"ProductNDC": "65219-162",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210617",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208418",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210617",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium Gluconate in Sodium Chloride Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.",
"Description": "Calcium Gluconate in Sodium Chloride Injection is a sterile, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) in single-dose bags. Each mL of Calcium Gluconate in Sodium Chloride Injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sodium chloride 6.75 mg/mL as tonicity adjustor. Each mL of Calcium Gluconate in Sodium Chloride Injection contains 1.86 mg (0.093 mEq) of elemental calcium."
},
{
"NDCCode": "65219-164-50",
"PackageDescription": "24 BAG in 1 CASE (65219-164-50) / 100 mL in 1 BAG (65219-164-01) ",
"NDC11Code": "65219-0164-50",
"ProductNDC": "65219-164",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210617",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208418",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210617",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium Gluconate in Sodium Chloride Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.",
"Description": "Calcium Gluconate in Sodium Chloride Injection is a sterile, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) in single-dose bags. Each mL of Calcium Gluconate in Sodium Chloride Injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sodium chloride 6.75 mg/mL as tonicity adjustor. Each mL of Calcium Gluconate in Sodium Chloride Injection contains 1.86 mg (0.093 mEq) of elemental calcium."
},
{
"NDCCode": "65219-259-45",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (65219-259-45) / 20 mL in 1 VIAL, SINGLE-USE (65219-259-05) ",
"NDC11Code": "65219-0259-45",
"ProductNDC": "65219-259",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180518",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203719",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "4; .5",
"StrengthUnit": "g/20mL; g/20mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180518",
"SamplePackage": "N",
"IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .",
"Description": "Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. : 1 Each Piperacillin and Tazobactam for Injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. , 2 Each Piperacillin and Tazobactam for Injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. , 3 Each Piperacillin and Tazobactam for Injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam."
},
{
"NDCCode": "65219-281-02",
"PackageDescription": "5 CARTON in 1 BOX (65219-281-02) / 3 VIAL, SINGLE-DOSE in 1 CARTON / 2 mL in 1 VIAL, SINGLE-DOSE (65219-281-00) ",
"NDC11Code": "65219-0281-02",
"ProductNDC": "65219-281",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gadobutrol",
"NonProprietaryName": "Gadobutrol",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230414",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215061",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "GADOBUTROL",
"StrengthNumber": "604.72",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230414",
"SamplePackage": "N",
"IndicationAndUsage": "Gadobutrol injection is a gadolinium-based contrast agent indicated for use with magnetic resonance imaging (MRI): 1 To detect and visualize areas with disrupted blood brain barrier and/or abnormal vascularity of the central nervous system in adult and pediatric patients, including term neonates (1.1), 2 To assess the presence and extent of malignant breast disease in adult patients (1.2), 3 To evaluate known or suspected supra-aortic or renal artery disease in adult and pediatric patients, including term neonates (1.3), 4 To assess myocardial perfusion (stress, rest) and late gadolinium enhancement in adult patients with known or suspected coronary artery disease (CAD). (1.4).",
"Description": "Gadobutrol injection is a paramagnetic macrocyclic contrast agent administered for magnetic resonance imaging. The chemical name for gadobutrol is 10–[(1SR,2RS)–2,3–dihydroxy–1–hydroxymethylpropyl]–1,4,7,10–tetraazacyclododecane–1,4,7–triacetic acid, gadolinium complex. Gadobutrol has a molecular formula of C18H31GdN4O9 and a molecular weight of 604.72. Gadobutrol injection is a sterile, clear, colorless to pale yellow solution containing 604.72 mg (1.0 mmol) of gadobutrol per mL as the active ingredient with 0.513 mg of calcobutrol sodium, 1.211 mg of trometamol, hydrochloric acid (for pH adjustment) and water for injection. Gadobutrol injection contains no preservatives. The main physicochemical properties of gadobutrol injection (1 mmol/mL solution for injection) are listed below. The thermodynamic stability constants for gadobutrol (log Ktherm and log Kcond at pH 7.4) are 21.8 and 15.3, respectively."
},
{
"NDCCode": "65219-281-07",
"PackageDescription": "2 CARTON in 1 BOX (65219-281-07) / 10 VIAL, SINGLE-DOSE in 1 CARTON / 7.5 mL in 1 VIAL, SINGLE-DOSE (65219-281-03) ",
"NDC11Code": "65219-0281-07",
"ProductNDC": "65219-281",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gadobutrol",
"NonProprietaryName": "Gadobutrol",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230414",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215061",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "GADOBUTROL",
"StrengthNumber": "604.72",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230414",
"SamplePackage": "N",
"IndicationAndUsage": "Gadobutrol injection is a gadolinium-based contrast agent indicated for use with magnetic resonance imaging (MRI): 1 To detect and visualize areas with disrupted blood brain barrier and/or abnormal vascularity of the central nervous system in adult and pediatric patients, including term neonates (1.1), 2 To assess the presence and extent of malignant breast disease in adult patients (1.2), 3 To evaluate known or suspected supra-aortic or renal artery disease in adult and pediatric patients, including term neonates (1.3), 4 To assess myocardial perfusion (stress, rest) and late gadolinium enhancement in adult patients with known or suspected coronary artery disease (CAD). (1.4).",
"Description": "Gadobutrol injection is a paramagnetic macrocyclic contrast agent administered for magnetic resonance imaging. The chemical name for gadobutrol is 10–[(1SR,2RS)–2,3–dihydroxy–1–hydroxymethylpropyl]–1,4,7,10–tetraazacyclododecane–1,4,7–triacetic acid, gadolinium complex. Gadobutrol has a molecular formula of C18H31GdN4O9 and a molecular weight of 604.72. Gadobutrol injection is a sterile, clear, colorless to pale yellow solution containing 604.72 mg (1.0 mmol) of gadobutrol per mL as the active ingredient with 0.513 mg of calcobutrol sodium, 1.211 mg of trometamol, hydrochloric acid (for pH adjustment) and water for injection. Gadobutrol injection contains no preservatives. The main physicochemical properties of gadobutrol injection (1 mmol/mL solution for injection) are listed below. The thermodynamic stability constants for gadobutrol (log Ktherm and log Kcond at pH 7.4) are 21.8 and 15.3, respectively."
},
{
"NDCCode": "65219-281-10",
"PackageDescription": "2 CARTON in 1 BOX (65219-281-10) / 10 VIAL, SINGLE-DOSE in 1 CARTON / 10 mL in 1 VIAL, SINGLE-DOSE (65219-281-08) ",
"NDC11Code": "65219-0281-10",
"ProductNDC": "65219-281",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gadobutrol",
"NonProprietaryName": "Gadobutrol",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230414",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215061",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "GADOBUTROL",
"StrengthNumber": "604.72",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230414",
"SamplePackage": "N",
"IndicationAndUsage": "Gadobutrol injection is a gadolinium-based contrast agent indicated for use with magnetic resonance imaging (MRI): 1 To detect and visualize areas with disrupted blood brain barrier and/or abnormal vascularity of the central nervous system in adult and pediatric patients, including term neonates (1.1), 2 To assess the presence and extent of malignant breast disease in adult patients (1.2), 3 To evaluate known or suspected supra-aortic or renal artery disease in adult and pediatric patients, including term neonates (1.3), 4 To assess myocardial perfusion (stress, rest) and late gadolinium enhancement in adult patients with known or suspected coronary artery disease (CAD). (1.4).",
"Description": "Gadobutrol injection is a paramagnetic macrocyclic contrast agent administered for magnetic resonance imaging. The chemical name for gadobutrol is 10–[(1SR,2RS)–2,3–dihydroxy–1–hydroxymethylpropyl]–1,4,7,10–tetraazacyclododecane–1,4,7–triacetic acid, gadolinium complex. Gadobutrol has a molecular formula of C18H31GdN4O9 and a molecular weight of 604.72. Gadobutrol injection is a sterile, clear, colorless to pale yellow solution containing 604.72 mg (1.0 mmol) of gadobutrol per mL as the active ingredient with 0.513 mg of calcobutrol sodium, 1.211 mg of trometamol, hydrochloric acid (for pH adjustment) and water for injection. Gadobutrol injection contains no preservatives. The main physicochemical properties of gadobutrol injection (1 mmol/mL solution for injection) are listed below. The thermodynamic stability constants for gadobutrol (log Ktherm and log Kcond at pH 7.4) are 21.8 and 15.3, respectively."
},
{
"NDCCode": "65219-281-15",
"PackageDescription": "2 CARTON in 1 BOX (65219-281-15) / 10 VIAL, SINGLE-DOSE in 1 CARTON / 15 mL in 1 VIAL, SINGLE-DOSE (65219-281-05) ",
"NDC11Code": "65219-0281-15",
"ProductNDC": "65219-281",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gadobutrol",
"NonProprietaryName": "Gadobutrol",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230414",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215061",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "GADOBUTROL",
"StrengthNumber": "604.72",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230414",
"SamplePackage": "N",
"IndicationAndUsage": "Gadobutrol injection is a gadolinium-based contrast agent indicated for use with magnetic resonance imaging (MRI): 1 To detect and visualize areas with disrupted blood brain barrier and/or abnormal vascularity of the central nervous system in adult and pediatric patients, including term neonates (1.1), 2 To assess the presence and extent of malignant breast disease in adult patients (1.2), 3 To evaluate known or suspected supra-aortic or renal artery disease in adult and pediatric patients, including term neonates (1.3), 4 To assess myocardial perfusion (stress, rest) and late gadolinium enhancement in adult patients with known or suspected coronary artery disease (CAD). (1.4).",
"Description": "Gadobutrol injection is a paramagnetic macrocyclic contrast agent administered for magnetic resonance imaging. The chemical name for gadobutrol is 10–[(1SR,2RS)–2,3–dihydroxy–1–hydroxymethylpropyl]–1,4,7,10–tetraazacyclododecane–1,4,7–triacetic acid, gadolinium complex. Gadobutrol has a molecular formula of C18H31GdN4O9 and a molecular weight of 604.72. Gadobutrol injection is a sterile, clear, colorless to pale yellow solution containing 604.72 mg (1.0 mmol) of gadobutrol per mL as the active ingredient with 0.513 mg of calcobutrol sodium, 1.211 mg of trometamol, hydrochloric acid (for pH adjustment) and water for injection. Gadobutrol injection contains no preservatives. The main physicochemical properties of gadobutrol injection (1 mmol/mL solution for injection) are listed below. The thermodynamic stability constants for gadobutrol (log Ktherm and log Kcond at pH 7.4) are 21.8 and 15.3, respectively."
},
{
"NDCCode": "65219-282-10",
"PackageDescription": "10 BAG in 1 CASE (65219-282-10) / 1000 mL in 1 BAG (65219-282-01) ",
"NDC11Code": "65219-0282-10",
"ProductNDC": "65219-282",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207310",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2025-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230630",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.",
"Description": "0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "65219-293-01",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (65219-293-01) / 1 mL in 1 VIAL, SINGLE-DOSE (65219-293-00) ",
"NDC11Code": "65219-0293-01",
"ProductNDC": "65219-293",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desmopressin Acetate",
"NonProprietaryName": "Desmopressin Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20230911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216922",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DESMOPRESSIN ACETATE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]",
"Status": "Active",
"LastUpdate": "2023-09-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230911",
"SamplePackage": "N",
"IndicationAndUsage": "Desmopressin acetate injection is a vasopressin analog used for: 1 Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. (1.1), 2 Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.2), 3 von Willebrand’s disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.3).",
"Description": "Desmopressin acetate injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows:Mol. Wt. 1183.34Empirical Formula: C46H64N14O12S2C2H4O23H2O. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (salt) trihydrate.Desmopressin acetate injection, USP is a sterile solution in a 1 mL single-dose vial: Each mL contains 4 mcg of desmopressin acetate, USP which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride USP, hydrochloric acid, NF and water for injection, USP. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH."
},
{
"NDCCode": "65219-295-10",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (65219-295-10) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "65219-0295-10",
"ProductNDC": "65219-295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desmopressin Acetate",
"NonProprietaryName": "Desmopressin Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20230911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216904",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DESMOPRESSIN ACETATE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]",
"Status": "Active",
"LastUpdate": "2023-09-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230911",
"SamplePackage": "N",
"IndicationAndUsage": "Desmopressin acetate injection is a vasopressin analog used for: 1 Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. (1.1), 2 Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.2), 3 von Willebrand’s disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.3)Limitations of Use, 4 Desmopressin acetate is ineffective and not indicated for the treatment of nephrogenic diabetes insipidus. (1.3), 5 von Willebrand’s disease (severe Type I) - not indicated for the treatment of patients with severe Type I von Willebrand’s disease and when there is evidence of an abnormal molecular form of factor VIII antigen. (1.3).",
"Description": "Desmopressin acetate injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows. Mol. Wt. 1183.34. Empirical Formula: C46H64N14O12S2·C2H4O2·3H2O. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (salt) trihydrate. Desmopressin acetate injection, USP is a sterile solution in a 10 mL multiple-dose vial: Each mL contains 4 mcg of desmopressin acetate, USP which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride USP, chlorobutanol hemihydrate, USP (5 mg per mL), hydrochloric acid, NF and water for injection, USP. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH."
},
{
"NDCCode": "65219-335-82",
"PackageDescription": "10 AMPULE in 1 CARTON (65219-335-82) / 10 mL in 1 AMPULE (65219-335-10) ",
"NDC11Code": "65219-0335-82",
"ProductNDC": "65219-335",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vitalipid N",
"NonProprietaryName": "Vitamin A Palmitate, Ergocalciferol, .alpha.-tocopherol, Dl-, Phytonadione",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230818",
"MarketingCategoryName": "UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VITAMIN A PALMITATE; ERGOCALCIFEROL; .ALPHA.-TOCOPHEROL, DL-; PHYTONADIONE",
"StrengthNumber": "330; 20; 1; 15",
"StrengthUnit": "[iU]/mL; [iU]/mL; [iU]/mL; ug/mL",
"Pharm_Classes": "Ergocalciferols [CS], Increased Prothrombin Activity [PE], Provitamin D2 Compound [EPC], Reversed Anticoagulation Activity [PE], Vitamin A [CS], Vitamin A [EPC], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]",
"Status": "Active",
"LastUpdate": "2023-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230818",
"SamplePackage": "N"
},
{
"NDCCode": "65219-337-62",
"PackageDescription": "10 AMPULE in 1 CARTON (65219-337-62) / 10 mL in 1 AMPULE (65219-337-10) ",
"NDC11Code": "65219-0337-62",
"ProductNDC": "65219-337",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vitalipid N",
"NonProprietaryName": "Vitamin A Palmitate, Ergocalciferol, .alpha.-tocopherol, Dl-, Phytonadione",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230818",
"MarketingCategoryName": "UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VITAMIN A PALMITATE; ERGOCALCIFEROL; .ALPHA.-TOCOPHEROL, DL-; PHYTONADIONE",
"StrengthNumber": "230; 40; .7; 20",
"StrengthUnit": "[iU]/mL; [iU]/mL; [iU]/mL; ug/mL",
"Pharm_Classes": "Ergocalciferols [CS], Increased Prothrombin Activity [PE], Provitamin D2 Compound [EPC], Reversed Anticoagulation Activity [PE], Vitamin A [CS], Vitamin A [EPC], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]",
"Status": "Active",
"LastUpdate": "2023-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230818",
"SamplePackage": "N"
},
{
"NDCCode": "65219-339-64",
"PackageDescription": "10 AMPULE in 1 CARTON (65219-339-64) / 10 mL in 1 AMPULE (65219-339-10) ",
"NDC11Code": "65219-0339-64",
"ProductNDC": "65219-339",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vitalipid N",
"NonProprietaryName": "Vitamin A Palmitate, Ergocalciferol, .alpha.-tocopherol, Dl-, Phytonadione",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230818",
"MarketingCategoryName": "UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VITAMIN A PALMITATE; ERGOCALCIFEROL; .ALPHA.-TOCOPHEROL, DL-; PHYTONADIONE",
"StrengthNumber": "230; 40; .7; 20",
"StrengthUnit": "[iU]/mL; [iU]/mL; [iU]/mL; ug/mL",
"Pharm_Classes": "Ergocalciferols [CS], Increased Prothrombin Activity [PE], Provitamin D2 Compound [EPC], Reversed Anticoagulation Activity [PE], Vitamin A [CS], Vitamin A [EPC], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]",
"Status": "Active",
"LastUpdate": "2023-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230818",
"SamplePackage": "N"
},
{
"NDCCode": "65219-380-30",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (65219-380-30) / 25 mL in 1 VIAL, GLASS",
"NDC11Code": "65219-0380-30",
"ProductNDC": "65219-380",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220314",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212363",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ALLOPURINOL SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220314",
"SamplePackage": "N",
"IndicationAndUsage": "Allopurinol for injection is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.",
"Description": "Allopurinol for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 153 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. Allopurinol for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is:. The pKa of allopurinol sodium is 9.31."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>65219-645-09</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (65219-645-09) / 9 mL in 1 VIAL, SINGLE-DOSE (65219-645-01) </PackageDescription>
<NDC11Code>65219-0645-09</NDC11Code>
<ProductNDC>65219-645</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250505</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075761</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone Hydrochloride Injection, USP contains amiodarone HCl (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone HCl is (2-butyl-3-benzo-furanyl)[4-[2- (diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone HCl has the following structural formula:. Amiodarone Hydrochloride Injection, USP is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection, USP is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone HCl, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection, USP contains polysorbate 80, which is known to leach di-(2- ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>65219-052-29</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (65219-052-29) / 5 mL in 1 VIAL, SINGLE-DOSE (65219-052-09) </PackageDescription>
<NDC11Code>65219-0052-29</NDC11Code>
<ProductNDC>65219-052</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200210</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212832</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>65219-054-29</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (65219-054-29) / 15 mL in 1 VIAL, SINGLE-DOSE (65219-054-09) </PackageDescription>
<NDC11Code>65219-0054-29</NDC11Code>
<ProductNDC>65219-054</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200210</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212832</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>65219-056-29</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (65219-056-29) / 50 mL in 1 VIAL (65219-056-09) </PackageDescription>
<NDC11Code>65219-0056-29</NDC11Code>
<ProductNDC>65219-056</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200210</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212832</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>11673-645-09</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (11673-645-09) > 10 CAPSULE, COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11673-0645-09</NDC11Code>
<ProductNDC>11673-645</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pe Multi-stymptom Cold And Cough Relief</ProprietaryName>
<NonProprietaryName>Acetaminophen, Dextromathorphan Hbr, Gauifenesin, Phenylephrine Hcl</NonProprietaryName>
<DosageFormName>CAPSULE, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070222</StartMarketingDate>
<EndMarketingDate>20181104</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 10; 100; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-11-06</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
</NDC>
<NDC>
<NDCCode>23155-645-09</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (23155-645-09) </PackageDescription>
<NDC11Code>23155-0645-09</NDC11Code>
<ProductNDC>23155-645</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium</ProprietaryName>
<ProprietaryNameSuffix>50 Mg</ProprietaryNameSuffix>
<NonProprietaryName>Losartan Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090382</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-04-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65162-645-09</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65162-645-09) </PackageDescription>
<NDC11Code>65162-0645-09</NDC11Code>
<ProductNDC>65162-645</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
<NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209647</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Esomeprazole is a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
<Description>The active ingredient in esomeprazole magnesium delayed-release capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R-isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2 Mg x 3H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium is supplied in delayed-release capsules. Each esomeprazole magnesium delayed-release capsule, USP contains 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate, USP) or 40 mg of esomeprazole (equivalent to 44.5 mg esomeprazole magnesium trihydrate, USP) in the form of enteric-coated granules with the following inactive ingredients: corn starch, gelatin, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion type C, mono- and di-glycerides, polysorbate 80, sodium lauryl sulfate, sucrose, talc, triethyl citrate and titanium dioxide. Each capsule shell is imprinted with blue pharmaceutical ink which contains: butyl alcohol, dehydrated alcohol, FD & C Blue # 2 aluminum lake, isopropyl alcohol, propylene glycol, shellac and strong ammonia solution. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>71919-645-09</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE, GLASS (71919-645-09) </PackageDescription>
<NDC11Code>71919-0645-09</NDC11Code>
<ProductNDC>71919-645</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sterculia Acuminata</ProprietaryName>
<NonProprietaryName>Cola Acuminata</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100908</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>COLA ACUMINATA SEED</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100908</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65219-118-10</NDCCode>
<PackageDescription>10 BAG in 1 CASE (65219-118-10) / 1000 mL in 1 BAG (65219-118-01) </PackageDescription>
<NDC11Code>65219-0118-10</NDC11Code>
<ProductNDC>65219-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213445</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 9; 1.49</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>65219-119-10</NDCCode>
<PackageDescription>10 BAG in 1 CASE (65219-119-10) / 1000 mL in 1 BAG (65219-119-01) </PackageDescription>
<NDC11Code>65219-0119-10</NDC11Code>
<ProductNDC>65219-119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213445</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 9; 2.98</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>65219-140-04</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (65219-140-04) / 4 mL in 1 VIAL, SINGLE-DOSE (65219-140-02) </PackageDescription>
<NDC11Code>65219-0140-04</NDC11Code>
<ProductNDC>65219-140</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Norepinephrine Bitartrate</ProprietaryName>
<NonProprietaryName>Norepinephrine Bitartrate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211382</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>NOREPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.</IndicationAndUsage>
<Description>Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine Bitartrate Injection, USP is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula:. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is sparingly soluble in water, very slightly soluble in alcohol and ether, and readily soluble in acids. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 0.2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the vials has been displaced by nitrogen gas.</Description>
</NDC>
<NDC>
<NDCCode>65219-142-10</NDCCode>
<PackageDescription>10 BAG in 1 CASE (65219-142-10) / 1000 mL in 1 BAG (65219-142-02) </PackageDescription>
<NDC11Code>65219-0142-10</NDC11Code>
<ProductNDC>65219-142</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220826</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213523</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 4.5; .745</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>65219-144-10</NDCCode>
<PackageDescription>10 BAG in 1 CASE (65219-144-10) / 1000 mL in 1 BAG (65219-144-04) </PackageDescription>
<NDC11Code>65219-0144-10</NDC11Code>
<ProductNDC>65219-144</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220826</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213523</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 4.5; 1.49</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>65219-146-10</NDCCode>
<PackageDescription>10 BAG in 1 CASE (65219-146-10) / 1000 mL in 1 BAG (65219-146-06) </PackageDescription>
<NDC11Code>65219-0146-10</NDC11Code>
<ProductNDC>65219-146</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220826</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213523</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 4.5; 2.24</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>65219-148-10</NDCCode>
<PackageDescription>10 BAG in 1 CASE (65219-148-10) / 1000 mL in 1 BAG (65219-148-08) </PackageDescription>
<NDC11Code>65219-0148-10</NDC11Code>
<ProductNDC>65219-148</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220826</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213523</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>50; 4.5; 2.98</StrengthNumber>
<StrengthUnit>g/1000mL; g/1000mL; g/1000mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>65219-150-75</NDCCode>
<PackageDescription>20 BAG in 1 CASE (65219-150-75) / 500 mL in 1 BAG (65219-150-00) </PackageDescription>
<NDC11Code>65219-0150-75</NDC11Code>
<ProductNDC>65219-150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Sodium Chloride, And Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220826</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213523</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>25; 2.25; .745</StrengthNumber>
<StrengthUnit>g/500mL; g/500mL; g/500mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>These solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.</IndicationAndUsage>
<Description>Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>65219-162-10</NDCCode>
<PackageDescription>24 BAG in 1 CASE (65219-162-10) / 50 mL in 1 BAG (65219-162-01) </PackageDescription>
<NDC11Code>65219-0162-10</NDC11Code>
<ProductNDC>65219-162</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210617</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208418</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium Gluconate in Sodium Chloride Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.</IndicationAndUsage>
<Description>Calcium Gluconate in Sodium Chloride Injection is a sterile, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) in single-dose bags. Each mL of Calcium Gluconate in Sodium Chloride Injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sodium chloride 6.75 mg/mL as tonicity adjustor. Each mL of Calcium Gluconate in Sodium Chloride Injection contains 1.86 mg (0.093 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>65219-164-50</NDCCode>
<PackageDescription>24 BAG in 1 CASE (65219-164-50) / 100 mL in 1 BAG (65219-164-01) </PackageDescription>
<NDC11Code>65219-0164-50</NDC11Code>
<ProductNDC>65219-164</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210617</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208418</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium Gluconate in Sodium Chloride Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.</IndicationAndUsage>
<Description>Calcium Gluconate in Sodium Chloride Injection is a sterile, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) in single-dose bags. Each mL of Calcium Gluconate in Sodium Chloride Injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sodium chloride 6.75 mg/mL as tonicity adjustor. Each mL of Calcium Gluconate in Sodium Chloride Injection contains 1.86 mg (0.093 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>65219-259-45</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (65219-259-45) / 20 mL in 1 VIAL, SINGLE-USE (65219-259-05) </PackageDescription>
<NDC11Code>65219-0259-45</NDC11Code>
<ProductNDC>65219-259</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180518</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203719</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>4; .5</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .</IndicationAndUsage>
<Description>Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. : 1 Each Piperacillin and Tazobactam for Injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. , 2 Each Piperacillin and Tazobactam for Injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. , 3 Each Piperacillin and Tazobactam for Injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam.</Description>
</NDC>
<NDC>
<NDCCode>65219-281-02</NDCCode>
<PackageDescription>5 CARTON in 1 BOX (65219-281-02) / 3 VIAL, SINGLE-DOSE in 1 CARTON / 2 mL in 1 VIAL, SINGLE-DOSE (65219-281-00) </PackageDescription>
<NDC11Code>65219-0281-02</NDC11Code>
<ProductNDC>65219-281</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gadobutrol</ProprietaryName>
<NonProprietaryName>Gadobutrol</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230414</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215061</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>GADOBUTROL</SubstanceName>
<StrengthNumber>604.72</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230414</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gadobutrol injection is a gadolinium-based contrast agent indicated for use with magnetic resonance imaging (MRI): 1 To detect and visualize areas with disrupted blood brain barrier and/or abnormal vascularity of the central nervous system in adult and pediatric patients, including term neonates (1.1), 2 To assess the presence and extent of malignant breast disease in adult patients (1.2), 3 To evaluate known or suspected supra-aortic or renal artery disease in adult and pediatric patients, including term neonates (1.3), 4 To assess myocardial perfusion (stress, rest) and late gadolinium enhancement in adult patients with known or suspected coronary artery disease (CAD). (1.4).</IndicationAndUsage>
<Description>Gadobutrol injection is a paramagnetic macrocyclic contrast agent administered for magnetic resonance imaging. The chemical name for gadobutrol is 10–[(1SR,2RS)–2,3–dihydroxy–1–hydroxymethylpropyl]–1,4,7,10–tetraazacyclododecane–1,4,7–triacetic acid, gadolinium complex. Gadobutrol has a molecular formula of C18H31GdN4O9 and a molecular weight of 604.72. Gadobutrol injection is a sterile, clear, colorless to pale yellow solution containing 604.72 mg (1.0 mmol) of gadobutrol per mL as the active ingredient with 0.513 mg of calcobutrol sodium, 1.211 mg of trometamol, hydrochloric acid (for pH adjustment) and water for injection. Gadobutrol injection contains no preservatives. The main physicochemical properties of gadobutrol injection (1 mmol/mL solution for injection) are listed below. The thermodynamic stability constants for gadobutrol (log Ktherm and log Kcond at pH 7.4) are 21.8 and 15.3, respectively.</Description>
</NDC>
<NDC>
<NDCCode>65219-281-07</NDCCode>
<PackageDescription>2 CARTON in 1 BOX (65219-281-07) / 10 VIAL, SINGLE-DOSE in 1 CARTON / 7.5 mL in 1 VIAL, SINGLE-DOSE (65219-281-03) </PackageDescription>
<NDC11Code>65219-0281-07</NDC11Code>
<ProductNDC>65219-281</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gadobutrol</ProprietaryName>
<NonProprietaryName>Gadobutrol</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230414</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215061</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>GADOBUTROL</SubstanceName>
<StrengthNumber>604.72</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230414</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gadobutrol injection is a gadolinium-based contrast agent indicated for use with magnetic resonance imaging (MRI): 1 To detect and visualize areas with disrupted blood brain barrier and/or abnormal vascularity of the central nervous system in adult and pediatric patients, including term neonates (1.1), 2 To assess the presence and extent of malignant breast disease in adult patients (1.2), 3 To evaluate known or suspected supra-aortic or renal artery disease in adult and pediatric patients, including term neonates (1.3), 4 To assess myocardial perfusion (stress, rest) and late gadolinium enhancement in adult patients with known or suspected coronary artery disease (CAD). (1.4).</IndicationAndUsage>
<Description>Gadobutrol injection is a paramagnetic macrocyclic contrast agent administered for magnetic resonance imaging. The chemical name for gadobutrol is 10–[(1SR,2RS)–2,3–dihydroxy–1–hydroxymethylpropyl]–1,4,7,10–tetraazacyclododecane–1,4,7–triacetic acid, gadolinium complex. Gadobutrol has a molecular formula of C18H31GdN4O9 and a molecular weight of 604.72. Gadobutrol injection is a sterile, clear, colorless to pale yellow solution containing 604.72 mg (1.0 mmol) of gadobutrol per mL as the active ingredient with 0.513 mg of calcobutrol sodium, 1.211 mg of trometamol, hydrochloric acid (for pH adjustment) and water for injection. Gadobutrol injection contains no preservatives. The main physicochemical properties of gadobutrol injection (1 mmol/mL solution for injection) are listed below. The thermodynamic stability constants for gadobutrol (log Ktherm and log Kcond at pH 7.4) are 21.8 and 15.3, respectively.</Description>
</NDC>
<NDC>
<NDCCode>65219-281-10</NDCCode>
<PackageDescription>2 CARTON in 1 BOX (65219-281-10) / 10 VIAL, SINGLE-DOSE in 1 CARTON / 10 mL in 1 VIAL, SINGLE-DOSE (65219-281-08) </PackageDescription>
<NDC11Code>65219-0281-10</NDC11Code>
<ProductNDC>65219-281</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gadobutrol</ProprietaryName>
<NonProprietaryName>Gadobutrol</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230414</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215061</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>GADOBUTROL</SubstanceName>
<StrengthNumber>604.72</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230414</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gadobutrol injection is a gadolinium-based contrast agent indicated for use with magnetic resonance imaging (MRI): 1 To detect and visualize areas with disrupted blood brain barrier and/or abnormal vascularity of the central nervous system in adult and pediatric patients, including term neonates (1.1), 2 To assess the presence and extent of malignant breast disease in adult patients (1.2), 3 To evaluate known or suspected supra-aortic or renal artery disease in adult and pediatric patients, including term neonates (1.3), 4 To assess myocardial perfusion (stress, rest) and late gadolinium enhancement in adult patients with known or suspected coronary artery disease (CAD). (1.4).</IndicationAndUsage>
<Description>Gadobutrol injection is a paramagnetic macrocyclic contrast agent administered for magnetic resonance imaging. The chemical name for gadobutrol is 10–[(1SR,2RS)–2,3–dihydroxy–1–hydroxymethylpropyl]–1,4,7,10–tetraazacyclododecane–1,4,7–triacetic acid, gadolinium complex. Gadobutrol has a molecular formula of C18H31GdN4O9 and a molecular weight of 604.72. Gadobutrol injection is a sterile, clear, colorless to pale yellow solution containing 604.72 mg (1.0 mmol) of gadobutrol per mL as the active ingredient with 0.513 mg of calcobutrol sodium, 1.211 mg of trometamol, hydrochloric acid (for pH adjustment) and water for injection. Gadobutrol injection contains no preservatives. The main physicochemical properties of gadobutrol injection (1 mmol/mL solution for injection) are listed below. The thermodynamic stability constants for gadobutrol (log Ktherm and log Kcond at pH 7.4) are 21.8 and 15.3, respectively.</Description>
</NDC>
<NDC>
<NDCCode>65219-281-15</NDCCode>
<PackageDescription>2 CARTON in 1 BOX (65219-281-15) / 10 VIAL, SINGLE-DOSE in 1 CARTON / 15 mL in 1 VIAL, SINGLE-DOSE (65219-281-05) </PackageDescription>
<NDC11Code>65219-0281-15</NDC11Code>
<ProductNDC>65219-281</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gadobutrol</ProprietaryName>
<NonProprietaryName>Gadobutrol</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230414</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215061</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>GADOBUTROL</SubstanceName>
<StrengthNumber>604.72</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230414</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gadobutrol injection is a gadolinium-based contrast agent indicated for use with magnetic resonance imaging (MRI): 1 To detect and visualize areas with disrupted blood brain barrier and/or abnormal vascularity of the central nervous system in adult and pediatric patients, including term neonates (1.1), 2 To assess the presence and extent of malignant breast disease in adult patients (1.2), 3 To evaluate known or suspected supra-aortic or renal artery disease in adult and pediatric patients, including term neonates (1.3), 4 To assess myocardial perfusion (stress, rest) and late gadolinium enhancement in adult patients with known or suspected coronary artery disease (CAD). (1.4).</IndicationAndUsage>
<Description>Gadobutrol injection is a paramagnetic macrocyclic contrast agent administered for magnetic resonance imaging. The chemical name for gadobutrol is 10–[(1SR,2RS)–2,3–dihydroxy–1–hydroxymethylpropyl]–1,4,7,10–tetraazacyclododecane–1,4,7–triacetic acid, gadolinium complex. Gadobutrol has a molecular formula of C18H31GdN4O9 and a molecular weight of 604.72. Gadobutrol injection is a sterile, clear, colorless to pale yellow solution containing 604.72 mg (1.0 mmol) of gadobutrol per mL as the active ingredient with 0.513 mg of calcobutrol sodium, 1.211 mg of trometamol, hydrochloric acid (for pH adjustment) and water for injection. Gadobutrol injection contains no preservatives. The main physicochemical properties of gadobutrol injection (1 mmol/mL solution for injection) are listed below. The thermodynamic stability constants for gadobutrol (log Ktherm and log Kcond at pH 7.4) are 21.8 and 15.3, respectively.</Description>
</NDC>
<NDC>
<NDCCode>65219-282-10</NDCCode>
<PackageDescription>10 BAG in 1 CASE (65219-282-10) / 1000 mL in 1 BAG (65219-282-01) </PackageDescription>
<NDC11Code>65219-0282-10</NDC11Code>
<ProductNDC>65219-282</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207310</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>65219-293-01</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (65219-293-01) / 1 mL in 1 VIAL, SINGLE-DOSE (65219-293-00) </PackageDescription>
<NDC11Code>65219-0293-01</NDC11Code>
<ProductNDC>65219-293</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desmopressin Acetate</ProprietaryName>
<NonProprietaryName>Desmopressin Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216922</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DESMOPRESSIN ACETATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desmopressin acetate injection is a vasopressin analog used for: 1 Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. (1.1), 2 Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.2), 3 von Willebrand’s disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.3).</IndicationAndUsage>
<Description>Desmopressin acetate injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows:Mol. Wt. 1183.34Empirical Formula: C46H64N14O12S2C2H4O23H2O. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (salt) trihydrate.Desmopressin acetate injection, USP is a sterile solution in a 1 mL single-dose vial: Each mL contains 4 mcg of desmopressin acetate, USP which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride USP, hydrochloric acid, NF and water for injection, USP. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>65219-295-10</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (65219-295-10) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>65219-0295-10</NDC11Code>
<ProductNDC>65219-295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desmopressin Acetate</ProprietaryName>
<NonProprietaryName>Desmopressin Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216904</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DESMOPRESSIN ACETATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desmopressin acetate injection is a vasopressin analog used for: 1 Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. (1.1), 2 Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.2), 3 von Willebrand’s disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.3)Limitations of Use, 4 Desmopressin acetate is ineffective and not indicated for the treatment of nephrogenic diabetes insipidus. (1.3), 5 von Willebrand’s disease (severe Type I) - not indicated for the treatment of patients with severe Type I von Willebrand’s disease and when there is evidence of an abnormal molecular form of factor VIII antigen. (1.3).</IndicationAndUsage>
<Description>Desmopressin acetate injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows. Mol. Wt. 1183.34. Empirical Formula: C46H64N14O12S2·C2H4O2·3H2O. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (salt) trihydrate. Desmopressin acetate injection, USP is a sterile solution in a 10 mL multiple-dose vial: Each mL contains 4 mcg of desmopressin acetate, USP which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride USP, chlorobutanol hemihydrate, USP (5 mg per mL), hydrochloric acid, NF and water for injection, USP. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>65219-335-82</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (65219-335-82) / 10 mL in 1 AMPULE (65219-335-10) </PackageDescription>
<NDC11Code>65219-0335-82</NDC11Code>
<ProductNDC>65219-335</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vitalipid N</ProprietaryName>
<NonProprietaryName>Vitamin A Palmitate, Ergocalciferol, .alpha.-tocopherol, Dl-, Phytonadione</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230818</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VITAMIN A PALMITATE; ERGOCALCIFEROL; .ALPHA.-TOCOPHEROL, DL-; PHYTONADIONE</SubstanceName>
<StrengthNumber>330; 20; 1; 15</StrengthNumber>
<StrengthUnit>[iU]/mL; [iU]/mL; [iU]/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Ergocalciferols [CS], Increased Prothrombin Activity [PE], Provitamin D2 Compound [EPC], Reversed Anticoagulation Activity [PE], Vitamin A [CS], Vitamin A [EPC], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65219-337-62</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (65219-337-62) / 10 mL in 1 AMPULE (65219-337-10) </PackageDescription>
<NDC11Code>65219-0337-62</NDC11Code>
<ProductNDC>65219-337</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vitalipid N</ProprietaryName>
<NonProprietaryName>Vitamin A Palmitate, Ergocalciferol, .alpha.-tocopherol, Dl-, Phytonadione</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230818</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VITAMIN A PALMITATE; ERGOCALCIFEROL; .ALPHA.-TOCOPHEROL, DL-; PHYTONADIONE</SubstanceName>
<StrengthNumber>230; 40; .7; 20</StrengthNumber>
<StrengthUnit>[iU]/mL; [iU]/mL; [iU]/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Ergocalciferols [CS], Increased Prothrombin Activity [PE], Provitamin D2 Compound [EPC], Reversed Anticoagulation Activity [PE], Vitamin A [CS], Vitamin A [EPC], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65219-339-64</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (65219-339-64) / 10 mL in 1 AMPULE (65219-339-10) </PackageDescription>
<NDC11Code>65219-0339-64</NDC11Code>
<ProductNDC>65219-339</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vitalipid N</ProprietaryName>
<NonProprietaryName>Vitamin A Palmitate, Ergocalciferol, .alpha.-tocopherol, Dl-, Phytonadione</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230818</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VITAMIN A PALMITATE; ERGOCALCIFEROL; .ALPHA.-TOCOPHEROL, DL-; PHYTONADIONE</SubstanceName>
<StrengthNumber>230; 40; .7; 20</StrengthNumber>
<StrengthUnit>[iU]/mL; [iU]/mL; [iU]/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Ergocalciferols [CS], Increased Prothrombin Activity [PE], Provitamin D2 Compound [EPC], Reversed Anticoagulation Activity [PE], Vitamin A [CS], Vitamin A [EPC], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65219-380-30</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (65219-380-30) / 25 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>65219-0380-30</NDC11Code>
<ProductNDC>65219-380</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220314</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212363</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ALLOPURINOL SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220314</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allopurinol for injection is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.</IndicationAndUsage>
<Description>Allopurinol for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 153 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. Allopurinol for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is:. The pKa of allopurinol sodium is 9.31.</Description>
</NDC>
</NDCList>