{
"NDC": [
{
"NDCCode": "65260-000-64",
"PackageDescription": "1900 mL in 1 BOTTLE, PLASTIC (65260-000-64) ",
"NDC11Code": "65260-0000-64",
"ProductNDC": "65260-000",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Antibacterial",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200603",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Thornton Industries, Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200603",
"SamplePackage": "N",
"IndicationAndUsage": "Uses for handwashing or decrease bacteria to the skin."
},
{
"NDCCode": "65260-000-32",
"PackageDescription": "946 mL in 1 BOTTLE, PLASTIC (65260-000-32) ",
"NDC11Code": "65260-0000-32",
"ProductNDC": "65260-000",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Antibacterial",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200603",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Thornton Industries, Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200603",
"SamplePackage": "N",
"IndicationAndUsage": "Uses for handwashing or decrease bacteria to the skin."
},
{
"NDCCode": "79116-000-01",
"PackageDescription": "64 mL in 1 BOTTLE (79116-000-01) ",
"NDC11Code": "79116-0000-01",
"ProductNDC": "79116-000",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naked X Restore Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Essations Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": ".7",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200330",
"SamplePackage": "N",
"IndicationAndUsage": " For handwashing to decrease bacteria on the skin. Moisturinzing, cleansing solution. Repeated use encouraged."
},
{
"NDCCode": "0032-1203-64",
"PackageDescription": "1 BOTTLE in 1 CARTON (0032-1203-64) / 70 CAPSULE, DELAYED RELEASE in 1 BOTTLE",
"NDC11Code": "00032-1203-64",
"ProductNDC": "0032-1203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Creon",
"NonProprietaryName": "Pancrelipase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090430",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020725",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "PANCRELIPASE AMYLASE; PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE",
"StrengthNumber": "15000; 3000; 9500",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2026-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090430",
"SamplePackage": "Y",
"IndicationAndUsage": "CREON® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases and is an extract derived from porcine pancreatic glands. The enteric-coated spheres in CREON are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. CREON (pancrelipase) delayed-release capsules are for oral administration, include a two-piece shell containing tan-colored enteric-coated spheres (0.71 mm to 1.60 mm in diameter), and are available as follows:. 3,000 USP units of lipase; 9,500 USP units of protease; and 15,000 USP units of amylase; delayed-release capsules with shells that contain hypromellose and titanium dioxide, and that also may contain carrageenan and potassium chloride. 6,000 USP units of lipase; 19,000 USP units of protease; and 30,000 USP units of amylase; delayed-release capsules with shells that may contain gelatin, hypromellose, carrageenan, potassium chloride, sodium lauryl sulfate, titanium dioxide, FD&C Blue No. 1, and FD&C Blue No. 2, red iron oxide, and yellow iron oxide. 12,000 USP units of lipase; 38,000 USP units of protease; and 60,000 USP units of amylase; delayed-release capsules with shells that may contain gelatin, hypromellose, carrageenan, potassium chloride, sodium lauryl sulfate, titanium dioxide, black iron oxide, red iron oxide, and yellow iron oxide. 24,000 USP units of lipase; 76,000 USP units of protease; and 120,000 USP units of amylase; delayed-release capsules with shells that may contain gelatin, hypromellose, carrageenan, potassium chloride, sodium lauryl sulfate, titanium dioxide, red iron oxide, and yellow iron oxide. 36,000 USP units of lipase; 114,000 USP units of protease; and 180,000 USP units of amylase; delayed-release capsules with shells that may contain gelatin, hypromellose, carrageenan, potassium chloride, sodium lauryl sulfate, titanium dioxide, FD&C Blue No. 1, and FD&C Blue No. 2. CREON (pancrelipase) delayed-release capsules include the following inactive ingredients: cetyl alcohol, dimethicone, hypromellose phthalate, polyethylene glycol, and triethyl citrate."
},
{
"NDCCode": "0069-0195-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0195-02) / .2 mL in 1 SYRINGE (0069-0195-01) ",
"NDC11Code": "00069-0195-02",
"ProductNDC": "0069-0195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "2500",
"StrengthUnit": "[iU]/.2mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0196-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0196-02) / .2 mL in 1 SYRINGE (0069-0196-01) ",
"NDC11Code": "00069-0196-02",
"ProductNDC": "0069-0196",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[iU]/.2mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0206-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0206-02) / .3 mL in 1 SYRINGE (0069-0206-01) ",
"NDC11Code": "00069-0206-02",
"ProductNDC": "0069-0206",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "7500",
"StrengthUnit": "[iU]/.3mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0217-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0217-02) / 1 mL in 1 SYRINGE (0069-0217-01) ",
"NDC11Code": "00069-0217-02",
"ProductNDC": "0069-0217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "10000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0220-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0220-02) / .5 mL in 1 SYRINGE (0069-0220-01) ",
"NDC11Code": "00069-0220-02",
"ProductNDC": "0069-0220",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "12500",
"StrengthUnit": "[iU]/.5mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0223-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0223-02) / .6 mL in 1 SYRINGE (0069-0223-01) ",
"NDC11Code": "00069-0223-02",
"ProductNDC": "0069-0223",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "15000",
"StrengthUnit": "[iU]/.6mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0228-02",
"PackageDescription": "10 SYRINGE in 1 CARTON (0069-0228-02) / .72 mL in 1 SYRINGE (0069-0228-01) ",
"NDC11Code": "00069-0228-02",
"ProductNDC": "0069-0228",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "18000",
"StrengthUnit": "[iU]/.72mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0232-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0069-0232-01) / 3.8 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00069-0232-01",
"ProductNDC": "0069-0232",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "25000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0069-0253-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0069-0253-10) / 4 mL in 1 VIAL, SINGLE-DOSE (0069-0253-01) ",
"NDC11Code": "00069-0253-10",
"ProductNDC": "0069-0253",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fragmin",
"NonProprietaryName": "Dalteparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20221017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020287",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "DALTEPARIN SODIUM",
"StrengthNumber": "2500",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221017",
"SamplePackage": "N",
"IndicationAndUsage": "FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).",
"Description": "FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula."
},
{
"NDCCode": "0404-9945-50",
"PackageDescription": "1 VIAL in 1 BAG (0404-9945-50) / 50 mL in 1 VIAL",
"NDC11Code": "00404-9945-50",
"ProductNDC": "0404-9945",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20220112",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018304",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220112",
"SamplePackage": "N",
"IndicationAndUsage": "SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of SENSORCAINE / SENSORCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use. Not all blocks are indicated for use with SENSORCAINE / SENSORCAINE WITH EPINEPHRINE given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.4, 5.5, 5.7, 5.9)].",
"Description": "SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C18H28N2O·HCl·H2O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C9H13NO3·C4H6O6, with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure. SENSORCAINE-MPFin single dose vials is a sterile, isotonic, clear, colorless, and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg, or 7.5 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE-MPF WITH EPINEPHRINE 1:200,000(as bitartrate) in single dose vials is a sterile, isotonic, clear, colorless to slightly yellow and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg or 7.5 mg bupivacaine hydrochloride anhydrous; respectively), 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5. SENSORCAINEin multiple dose vials is a sterile, isotonic, clear, colorless solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 g sodium chloride for isotonicity, 1 mg of methyl paraben as an antiseptic preservative and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE WITH EPINEPHRINE 1:200,000(as bitartrate) in multiple dose vials is a sterile, isotonic, clear, colorless to slightly yellow solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 1 mg methylparaben as an antiseptic preservative, 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5."
},
{
"NDCCode": "0404-9946-10",
"PackageDescription": "1 VIAL in 1 BAG (0404-9946-10) / 10 mL in 1 VIAL",
"NDC11Code": "00404-9946-10",
"ProductNDC": "0404-9946",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine Mpf",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20220112",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070553",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220112",
"SamplePackage": "N",
"IndicationAndUsage": "SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of SENSORCAINE / SENSORCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use. Not all blocks are indicated for use with SENSORCAINE / SENSORCAINE WITH EPINEPHRINE given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.4, 5.5, 5.7, 5.9)].",
"Description": "SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C18H28N2O·HCl·H2O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C9H13NO3·C4H6O6, with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure. SENSORCAINE-MPF in single dose vials is a sterile, isotonic, clear, colorless, and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg, or 7.5 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE-MPF WITH EPINEPHRINE 1:200,000 (as bitartrate) in single dose vials is a sterile, isotonic, clear, colorless to slightly yellow and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg or 7.5 mg bupivacaine hydrochloride anhydrous; respectively), 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5. SENSORCAINE in multiple dose vials is a sterile, isotonic, clear, colorless solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 g sodium chloride for isotonicity, 1 mg of methyl paraben as an antiseptic preservative and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE WITH EPINEPHRINE 1:200,000 (as bitartrate) in multiple dose vials is a sterile, isotonic, clear, colorless to slightly yellow solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 1 mg methylparaben as an antiseptic preservative, 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5."
},
{
"NDCCode": "0409-1555-54",
"PackageDescription": "12 BAG in 1 CASE (0409-1555-54) / 500 mL in 1 BAG (0409-1555-64) ",
"NDC11Code": "00409-1555-54",
"ProductNDC": "0409-1555",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hextend",
"NonProprietaryName": "Hetastarch",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN200952",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "HETASTARCH",
"StrengthNumber": "6",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Intravascular Volume [PE], Osmotic Activity [MoA], Plasma Volume Expander [EPC], Starch [CS]",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050202",
"SamplePackage": "N",
"IndicationAndUsage": "HEXTEND (6% Hetastarch in Lactated Electrolyte Injection) is indicated in the treatment of hypovolemia when plasma volume expansion is desired in settings where adequate alternative treatment is unavailable. It is not a substitute for blood or plasma.",
"Description": "HEXTEND® (6% Hetastarch in Lactated Electrolyte Injection) is a sterile, nonpyrogenic solution for intravenous administration. The composition, pH, and osmolarity are given in Table 1 and the electrolyte composition in Table 2. HEXTEND (6% Hetastarch in Lactated Electrolyte Injection) is an artificial colloidal solution, pharmacologically classified as a plasma volume expander, and is intended to support oncotic pressure as well as provide electrolytes. HEXTEND contains high molecular weight hetastarch at a concentration of 6% as an oncotic agent to permit retention of intravascular fluid until the hetastarch is replaced by blood proteins. Hetastarch is an artificial colloid derived from a waxy starch composed almost entirely of amylopectin. Hydroxyethyl ether groups are introduced into the glucose units of the starch, and the resultant material is hydrolyzed to yield a product with a molecular weight suitable for use as a plasma volume expander. Hetastarch is characterized by its molar substitution and also by its molecular weight. The molar substitution is approximately 0.75 which means hetastarch has an average of approximately 75 hydroxyethyl groups for every 100 glucose units. The weight average molecular weight is approximately 670,000 with a range of 450,000 to 800,000 and with at least 80% of the polymer units falling within the range of 20,000 to 2,500,000. Hydroxyethyl groups are attached by ether linkage primarily at C-2 of the glucose unit and to a lesser extent at C-3 and C-6. The polymer resembles glycogen, and the polymerized D-glucose units are joined primarily by α-1,4 linkages with occasional α-1,6 branching linkages. The degree of branching is approximately 1:20 which means that there is an average of approximately one α-1,6 branch for every 20 glucose monomer units. The chemical name for hetastarch is hydroxyethyl starch. The structural formula is as follows. Amylopectin derivative in which R2 and R3 are H or CH2CH2OH and R6 is H, CH2CH2OH, or a branching point in the starch polymer connected through an α-1,6 link to additional D-glucopyranosyl units. HEXTEND is a clear, pale yellow to amber solution. Exposure to prolonged adverse storage conditions may result in a change to a turbid deep brown or the formation of a crystalline precipitate. Do not use the solution if these conditions are evident. HEXTEND is formulated with normal physiological levels of calcium. Calcium chloride in water dissociates to provide calcium (Ca++) and chloride (Cl-) ions. These are the normal constituents of the body fluids and are dependent on various physiologic mechanisms for maintenance of balance between intake and output. Approximately 80% of body calcium is excreted in the feces as insoluble salts; urinary excretion accounts for the remaining 20%. HEXTEND also contains normal physiological levels of sodium. Additionally, chloride is present at levels closer to those normally found in blood than in plasma expanders in 0.9% Sodium Chloride Injection. Sodium chloride in water dissociates to provide sodium (Na+) and chloride (Cl-) ions. Sodium (Na+) is the principal cation of the extracellular fluid and plays a large part in the therapy of fluid and electrolyte disturbances. Chloride (Cl-) has an integral role in buffering action when oxygen and carbon dioxide exchange occurs in the red blood cells. The distribution and excretion of sodium (Na+) and chloride (Cl-) are largely under the control of the kidneys, which maintain a balance between intake and output. HEXTEND also contains slightly lower than normal physiological levels of potassium and magnesium. Potassium chloride in water dissociates to provide potassium (K+) and chloride (Cl-) ions. Potassium is found in low concentrations in plasma and extracellular fluids (3.5 to 5.0 mEq/L in a healthy adult). It is the most abundant cation within the body's cells (160 mEq/L of intracellular water). Potassium plays an important role in electrolyte balance. Normally about 80 to 90% of the potassium intake is excreted in the urine with the remainder in the stools and, to a small extent, in the perspiration. The kidney does not conserve potassium well so that during fasting or in patients on a potassium-free diet, potassium loss from the body continues thereby resulting in potassium depletion. Magnesium chloride in water dissociates to provide magnesium (Mg++) and chloride (Cl-). Magnesium is largely an intracellular ion with low concentrations (1.5 to 2.5 mEq/L) found in plasma. Dextrose is included in the formulation. Solutions containing carbohydrate in the form of dextrose yield blood glucose, provide calories, and may also aid in minimizing liver glycogen depletion thereby exerting a protein sparing effect. Dextrose injected parenterally undergoes oxidation to carbon dioxide and water. Lactate is provided at 28 mEq/L. Sodium lactate in water dissociates to provide sodium (Na+) and lactate (C3H5O3-) ions. The lactate anion provides an alkaline effect resulting from simultaneous removal of lactate and hydrogen ions by the liver. In the liver, the lactate is metabolized to glycogen, which is ultimately converted to carbon dioxide and water by oxidative metabolism. The lactate anion acts as a source (alternate) of bicarbonate when normal production and utilization of lactic acid is not impaired as a result of disordered lactate metabolism. Since metabolic conversion is dependent on the integrity of cellular oxidative processes, lactate may be inadequate or ineffective as a source of bicarbonate in patients suffering from acidosis associated with shock or other disorders involving reduced perfusion of body tissues. When oxidative activity is intact, one to two hours is required for metabolism of lactate. Water is an essential constituent of all body tissues and accounts for approximately 70% of total body weight. The average normal adult daily requirement ranges from 2 to 3 L (1.0 to 1.5 L each for insensible water loss by perspiration and urine production). Water balance is maintained by various regulatory mechanisms. Water distribution depends primarily on the concentration of electrolytes in the body compartments, and sodium (Na+) plays a major role in maintaining physiological equilibrium. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The container solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "10147-1700-3",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (10147-1700-3) ",
"NDC11Code": "10147-1700-03",
"ProductNDC": "10147-1700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Itraconazole",
"NonProprietaryName": "Itraconazole",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020083",
"LabelerName": "Patriot Pharmaceuticals",
"SubstanceName": "ITRACONAZOLE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050201",
"SamplePackage": "N",
"IndicationAndUsage": "Itraconazole Capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients: : 1 Blastomycosis, pulmonary and extrapulmonary, 2 Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and, 3 Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy.",
"Description": "Itraconazole is an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[( R*)- sec-butyl]-4-[ p-[4-[ p-[[(2 R*,4 S*)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one mixture with (±)-1-[( R*)- sec-butyl]-4-[ p-[4-[ p-[[(2 S*,4 R*)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one. or. (±)-1-[( RS)- sec-butyl]-4-[ p-[4-[ p-[[(2 R,4 S)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C 35H 38Cl 2N 8O 4and a molecular weight of 705.64. It is a white to slightly yellowish powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. Itraconazole Capsules contain 100 mg of itraconazole coated on sugar spheres (composed of sucrose, maize starch, and purified water). Inactive ingredients are hard gelatin capsule, hypromellose, polyethylene glycol (PEG) 20,000, titanium dioxide, FD&C Blue No. 1, FD&C Blue No. 2, D&C Red No. 22 and D&C Red No. 28. Meets USP Dissolution Test 2."
},
{
"NDCCode": "16729-271-10",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (16729-271-10) ",
"NDC11Code": "16729-0271-10",
"ProductNDC": "16729-271",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Itraconazole",
"NonProprietaryName": "Itraconazole",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170530",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205991",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "ITRACONAZOLE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170530",
"SamplePackage": "N",
"IndicationAndUsage": "Itraconazole capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients: : 1 Blastomycosis, pulmonary and extrapulmonary , 2 Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and , 3 Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy. .",
"Description": "Itraconazole is an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[( R*)- sec-butyl]-4-[ p-[4-[ p-[[(2 R*,4 S*)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one mixture with (±)-1-[( R*)- sec-butyl]-4-[ p-[4-[ p-[[(2 S*,4 R*)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one. or. (±)-1-[( RS)- sec-butyl]-4-[ p-[4-[ p-[[(2 R,4 S)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C 35H 38Cl 2N 8O 4 and a molecular weight of 705.64. It is a white to slightly yellowish powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. Itraconazole capsules contain 100 mg of itraconazole coated on sugar spheres. Inactive ingredients are hard gelatin capsule, hypromellose, polyglykol (PEG 20,000), purified talc, and sugar spheres (maize starch and sucrose). Components of the gelatin capsule include FD&C Blue No. 1, FD&C Blue No. 2, gelatin, D&C Red No. 28, and titanium dioxide. The printing ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide."
},
{
"NDCCode": "50458-290-01",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (50458-290-01) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "50458-0290-01",
"ProductNDC": "50458-290",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sporanox",
"NonProprietaryName": "Itraconazole",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19920911",
"EndMarketingDate": "20261130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020083",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "ITRACONAZOLE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19920911",
"EndMarketingDatePackage": "20261130",
"SamplePackage": "N",
"IndicationAndUsage": "SPORANOX® (itraconazole) Capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients: 1 Blastomycosis, pulmonary and extrapulmonary, 2 Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and, 3 Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy.",
"Description": "SPORANOX® is the brand name for itraconazole, an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2R*,4S*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one mixture with (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2S*,4R*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. or. (±)-1-[(RS)-sec-butyl]-4-[p-[4-[p-[[(2R,4S)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C35H38Cl2N8O4 and a molecular weight of 705.64. It is a white to slightly yellowish powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. SPORANOX® Capsules contain 100 mg of itraconazole coated on sugar spheres (composed of sucrose, maize starch, and purified water). Inactive ingredients are hard gelatin capsule, hypromellose, polyethylene glycol (PEG) 20,000, titanium dioxide, FD&C Blue No. 1, FD&C Blue No. 2, D&C Red No. 22 and D&C Red No. 28. Meets USP Dissolution Test 2."
},
{
"NDCCode": "50458-290-04",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (50458-290-04) ",
"NDC11Code": "50458-0290-04",
"ProductNDC": "50458-290",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sporanox",
"NonProprietaryName": "Itraconazole",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19920911",
"EndMarketingDate": "20261130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020083",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "ITRACONAZOLE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19920911",
"EndMarketingDatePackage": "20261130",
"SamplePackage": "N",
"IndicationAndUsage": "SPORANOX® (itraconazole) Capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients: 1 Blastomycosis, pulmonary and extrapulmonary, 2 Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and, 3 Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy.",
"Description": "SPORANOX® is the brand name for itraconazole, an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2R*,4S*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one mixture with (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2S*,4R*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. or. (±)-1-[(RS)-sec-butyl]-4-[p-[4-[p-[[(2R,4S)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C35H38Cl2N8O4 and a molecular weight of 705.64. It is a white to slightly yellowish powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. SPORANOX® Capsules contain 100 mg of itraconazole coated on sugar spheres (composed of sucrose, maize starch, and purified water). Inactive ingredients are hard gelatin capsule, hypromellose, polyethylene glycol (PEG) 20,000, titanium dioxide, FD&C Blue No. 1, FD&C Blue No. 2, D&C Red No. 22 and D&C Red No. 28. Meets USP Dissolution Test 2."
},
{
"NDCCode": "63148-000-50",
"PackageDescription": "1500 mL in 1 BOTTLE, PLASTIC (63148-000-50) ",
"NDC11Code": "63148-0000-50",
"ProductNDC": "63148-000",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Shopko Blue Mint",
"NonProprietaryName": "Eucalyptol, Menthol, Methyl Salicylate, Thymol",
"DosageFormName": "MOUTHWASH",
"RouteName": "ORAL",
"StartMarketingDate": "20180607",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part356",
"LabelerName": "Apollo Health and Beauty Care Inc.",
"SubstanceName": "EUCALYPTOL; MENTHOL; METHYL SALICYLATE; THYMOL",
"StrengthNumber": ".92; .42; .6; .64",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20180607",
"SamplePackage": "N",
"IndicationAndUsage": "helps reduce plaque that leads to: 1 gingivitis, 2 bleeding gums."
},
{
"NDCCode": "68151-2718-0",
"PackageDescription": "1 CAPSULE in 1 PACKAGE (68151-2718-0)",
"NDC11Code": "68151-2718-00",
"ProductNDC": "68151-2718",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Itraconazole",
"NonProprietaryName": "Itraconazole",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020083",
"LabelerName": "Carilion Materials Management",
"SubstanceName": "ITRACONAZOLE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC],Azoles [CS],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA],Breast Cancer Resistance Protein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Itraconazole Capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients: 1 Blastomycosis, pulmonary and extrapulmonary, 2 Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and, 3 Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy.",
"Description": "Itraconazole is an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2R*,4S*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one mixture with (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2S*,4R*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. or. (±)-1-[(RS)-sec-butyl]-4-[p-[4-[p-[[(2R,4S)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C35H38Cl2N8O4 and a molecular weight of 705.64. It is a white to slightly yellowish powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. Itraconazole Capsules contain 100 mg of itraconazole coated on sugar spheres (composed of sucrose, maize starch, and purified water). Inactive ingredients are hard gelatin capsule, hypromellose, polyethylene glycol (PEG) 20,000, titanium dioxide, FD&C Blue No. 1, FD&C Blue No. 2, D&C Red No. 22 and D&C Red No. 28."
},
{
"NDCCode": "71205-859-64",
"PackageDescription": "240 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (71205-859-64) ",
"NDC11Code": "71205-0859-64",
"ProductNDC": "71205-859",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20211101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213247",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220506",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride extended-release tablets contain the biguanidine antihyperglycemic agent, metformin, in the form of monohydrochloride salt. The chemical name of metformin HCl is N, N-dimethylimidodicarbonimidic diamide hydrochloride with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Its structural formula is. Metformin HCl is a white to off-white crystalline powder that is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. Metformin hydrochloride extended-release tablets deliver 500 mg or 1,000 mg of metformin HCl, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. In addition to the active ingredient metformin HCl, each tablet contains the following inactive ingredients: crospovidone, povidone (K-30, K-90), pregelatinised starch, magnesium stearate, sodium lauryl sulfate, hydroxypropyl cellulose, talc, cellulose acetate, polyethylene glycol (PEG 400, PEG 3350), triacetin, polyvinyl alcohol, titanium dioxide, black iron oxide, propylene glycol and hypromellose. FDA approved dissolution test specifications differ from the USP."
},
{
"NDCCode": "71205-860-64",
"PackageDescription": "240 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (71205-860-64) ",
"NDC11Code": "71205-0860-64",
"ProductNDC": "71205-860",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20211101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213247",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220506",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride extended-release tablets contain the biguanidine antihyperglycemic agent, metformin, in the form of monohydrochloride salt. The chemical name of metformin HCl is N, N-dimethylimidodicarbonimidic diamide hydrochloride with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Its structural formula is. Metformin HCl is a white to off-white crystalline powder that is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. Metformin hydrochloride extended-release tablets deliver 500 mg or 1,000 mg of metformin HCl, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. In addition to the active ingredient metformin HCl, each tablet contains the following inactive ingredients: crospovidone, povidone (K-30, K-90), pregelatinised starch, magnesium stearate, sodium lauryl sulfate, hydroxypropyl cellulose, talc, cellulose acetate, polyethylene glycol (PEG 400, PEG 3350), triacetin, polyvinyl alcohol, titanium dioxide, black iron oxide, propylene glycol and hypromellose. FDA approved dissolution test specifications differ from the USP."
},
{
"NDCCode": "72146-000-01",
"PackageDescription": "295 mL in 1 BOTTLE (72146-000-01) ",
"NDC11Code": "72146-0000-01",
"ProductNDC": "72146-000",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Global Care Hand Sanitizer Isopropyl Alcohol",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200401",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "TARGET PRICE INC",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": ".64",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2021-11-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200401",
"SamplePackage": "N"
},
{
"NDCCode": "80753-000-01",
"PackageDescription": "1 PATCH in 1 PACKAGE (80753-000-01) > 14.79 mL in 1 PATCH",
"NDC11Code": "80753-0000-01",
"ProductNDC": "80753-000",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Clean Towel Sanitizing Cloth",
"NonProprietaryName": "Alcohol",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201009",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "White Towel Service Inc",
"SubstanceName": "ALCOHOL",
"StrengthNumber": ".64",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20201009",
"SamplePackage": "N"
},
{
"NDCCode": "84677-052-18",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE (84677-052-18) ",
"NDC11Code": "84677-0052-18",
"ProductNDC": "84677-052",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"NonProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202426",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "SITAGLIPTIN PHOSPHATE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "50; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260601",
"SamplePackage": "N",
"IndicationAndUsage": "Sitagliptin and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. : 1 Limitations of Use.",
"Description": "Sitagliptin and metformin hydrochloride tablets for oral use contain two antihyperglycemic drugs: sitagliptin and metformin HCl. Sitagliptin. Sitagliptin is an orally-active inhibitor of the dipeptidyl peptidase-4 (DPP-4) enzyme. Sitagliptin is present in sitagliptin and metformin hydrochloride tablets in the form of sitagliptin phosphate monohydrate. Sitagliptin phosphate monohydrate is described chemically as 7-[( R)-3-Amino-4-(2,4,5-trifluorophenyl)butanoyl]-3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3- a]pyrazine monophosphate monohydrate with a molecular formula of C 16H 15F 6N 5OH 3PO 4H 2O and a molecular weight of 523.32. The structural formula is:. Sitagliptin phosphate monohydrate is a white or almost white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in anhydrous ethanol and practically insoluble in heptane. Metformin HCl. Metformin HCl (N,N-dimethylimidodicarbonimidic diamide hydrochloride)is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. Metformin HCl is a white or almost white powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone and methylene chloride. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown:. Sitagliptin and Metformin Hydrochloride Tablets. Sitagliptin and metformin hydrochloride tablets are available as film-coated tablets containing: 1 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 500 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/500)., 2 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 1,000 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/1,000)."
},
{
"NDCCode": "84677-052-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (84677-052-60) ",
"NDC11Code": "84677-0052-60",
"ProductNDC": "84677-052",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"NonProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202426",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "SITAGLIPTIN PHOSPHATE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "50; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260601",
"SamplePackage": "N",
"IndicationAndUsage": "Sitagliptin and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. : 1 Limitations of Use.",
"Description": "Sitagliptin and metformin hydrochloride tablets for oral use contain two antihyperglycemic drugs: sitagliptin and metformin HCl. Sitagliptin. Sitagliptin is an orally-active inhibitor of the dipeptidyl peptidase-4 (DPP-4) enzyme. Sitagliptin is present in sitagliptin and metformin hydrochloride tablets in the form of sitagliptin phosphate monohydrate. Sitagliptin phosphate monohydrate is described chemically as 7-[( R)-3-Amino-4-(2,4,5-trifluorophenyl)butanoyl]-3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3- a]pyrazine monophosphate monohydrate with a molecular formula of C 16H 15F 6N 5OH 3PO 4H 2O and a molecular weight of 523.32. The structural formula is:. Sitagliptin phosphate monohydrate is a white or almost white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in anhydrous ethanol and practically insoluble in heptane. Metformin HCl. Metformin HCl (N,N-dimethylimidodicarbonimidic diamide hydrochloride)is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. Metformin HCl is a white or almost white powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone and methylene chloride. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown:. Sitagliptin and Metformin Hydrochloride Tablets. Sitagliptin and metformin hydrochloride tablets are available as film-coated tablets containing: 1 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 500 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/500)., 2 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 1,000 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/1,000)."
},
{
"NDCCode": "84677-053-18",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE (84677-053-18) ",
"NDC11Code": "84677-0053-18",
"ProductNDC": "84677-053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"NonProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202426",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "SITAGLIPTIN PHOSPHATE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "50; 1000",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260601",
"SamplePackage": "N",
"IndicationAndUsage": "Sitagliptin and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. : 1 Limitations of Use.",
"Description": "Sitagliptin and metformin hydrochloride tablets for oral use contain two antihyperglycemic drugs: sitagliptin and metformin HCl. Sitagliptin. Sitagliptin is an orally-active inhibitor of the dipeptidyl peptidase-4 (DPP-4) enzyme. Sitagliptin is present in sitagliptin and metformin hydrochloride tablets in the form of sitagliptin phosphate monohydrate. Sitagliptin phosphate monohydrate is described chemically as 7-[( R)-3-Amino-4-(2,4,5-trifluorophenyl)butanoyl]-3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3- a]pyrazine monophosphate monohydrate with a molecular formula of C 16H 15F 6N 5OH 3PO 4H 2O and a molecular weight of 523.32. The structural formula is:. Sitagliptin phosphate monohydrate is a white or almost white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in anhydrous ethanol and practically insoluble in heptane. Metformin HCl. Metformin HCl (N,N-dimethylimidodicarbonimidic diamide hydrochloride)is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. Metformin HCl is a white or almost white powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone and methylene chloride. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown:. Sitagliptin and Metformin Hydrochloride Tablets. Sitagliptin and metformin hydrochloride tablets are available as film-coated tablets containing: 1 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 500 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/500)., 2 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 1,000 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/1,000)."
},
{
"NDCCode": "84677-053-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (84677-053-60) ",
"NDC11Code": "84677-0053-60",
"ProductNDC": "84677-053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"NonProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202426",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "SITAGLIPTIN PHOSPHATE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "50; 1000",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260601",
"SamplePackage": "N",
"IndicationAndUsage": "Sitagliptin and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. : 1 Limitations of Use.",
"Description": "Sitagliptin and metformin hydrochloride tablets for oral use contain two antihyperglycemic drugs: sitagliptin and metformin HCl. Sitagliptin. Sitagliptin is an orally-active inhibitor of the dipeptidyl peptidase-4 (DPP-4) enzyme. Sitagliptin is present in sitagliptin and metformin hydrochloride tablets in the form of sitagliptin phosphate monohydrate. Sitagliptin phosphate monohydrate is described chemically as 7-[( R)-3-Amino-4-(2,4,5-trifluorophenyl)butanoyl]-3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3- a]pyrazine monophosphate monohydrate with a molecular formula of C 16H 15F 6N 5OH 3PO 4H 2O and a molecular weight of 523.32. The structural formula is:. Sitagliptin phosphate monohydrate is a white or almost white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in anhydrous ethanol and practically insoluble in heptane. Metformin HCl. Metformin HCl (N,N-dimethylimidodicarbonimidic diamide hydrochloride)is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. Metformin HCl is a white or almost white powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone and methylene chloride. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown:. Sitagliptin and Metformin Hydrochloride Tablets. Sitagliptin and metformin hydrochloride tablets are available as film-coated tablets containing: 1 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 500 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/500)., 2 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 1,000 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/1,000)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>65260-000-64</NDCCode>
<PackageDescription>1900 mL in 1 BOTTLE, PLASTIC (65260-000-64) </PackageDescription>
<NDC11Code>65260-0000-64</NDC11Code>
<ProductNDC>65260-000</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Antibacterial</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200603</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Thornton Industries, Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses for handwashing or decrease bacteria to the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65260-000-32</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, PLASTIC (65260-000-32) </PackageDescription>
<NDC11Code>65260-0000-32</NDC11Code>
<ProductNDC>65260-000</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Antibacterial</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200603</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Thornton Industries, Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses for handwashing or decrease bacteria to the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>79116-000-01</NDCCode>
<PackageDescription>64 mL in 1 BOTTLE (79116-000-01) </PackageDescription>
<NDC11Code>79116-0000-01</NDC11Code>
<ProductNDC>79116-000</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naked X Restore Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Essations Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>.7</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> For handwashing to decrease bacteria on the skin. Moisturinzing, cleansing solution. Repeated use encouraged.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0032-1203-64</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0032-1203-64) / 70 CAPSULE, DELAYED RELEASE in 1 BOTTLE</PackageDescription>
<NDC11Code>00032-1203-64</NDC11Code>
<ProductNDC>0032-1203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Creon</ProprietaryName>
<NonProprietaryName>Pancrelipase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090430</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020725</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>PANCRELIPASE AMYLASE; PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE</SubstanceName>
<StrengthNumber>15000; 3000; 9500</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090430</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>CREON® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases and is an extract derived from porcine pancreatic glands. The enteric-coated spheres in CREON are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. CREON (pancrelipase) delayed-release capsules are for oral administration, include a two-piece shell containing tan-colored enteric-coated spheres (0.71 mm to 1.60 mm in diameter), and are available as follows:. 3,000 USP units of lipase; 9,500 USP units of protease; and 15,000 USP units of amylase; delayed-release capsules with shells that contain hypromellose and titanium dioxide, and that also may contain carrageenan and potassium chloride. 6,000 USP units of lipase; 19,000 USP units of protease; and 30,000 USP units of amylase; delayed-release capsules with shells that may contain gelatin, hypromellose, carrageenan, potassium chloride, sodium lauryl sulfate, titanium dioxide, FD&C Blue No. 1, and FD&C Blue No. 2, red iron oxide, and yellow iron oxide. 12,000 USP units of lipase; 38,000 USP units of protease; and 60,000 USP units of amylase; delayed-release capsules with shells that may contain gelatin, hypromellose, carrageenan, potassium chloride, sodium lauryl sulfate, titanium dioxide, black iron oxide, red iron oxide, and yellow iron oxide. 24,000 USP units of lipase; 76,000 USP units of protease; and 120,000 USP units of amylase; delayed-release capsules with shells that may contain gelatin, hypromellose, carrageenan, potassium chloride, sodium lauryl sulfate, titanium dioxide, red iron oxide, and yellow iron oxide. 36,000 USP units of lipase; 114,000 USP units of protease; and 180,000 USP units of amylase; delayed-release capsules with shells that may contain gelatin, hypromellose, carrageenan, potassium chloride, sodium lauryl sulfate, titanium dioxide, FD&C Blue No. 1, and FD&C Blue No. 2. CREON (pancrelipase) delayed-release capsules include the following inactive ingredients: cetyl alcohol, dimethicone, hypromellose phthalate, polyethylene glycol, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>0069-0195-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0195-02) / .2 mL in 1 SYRINGE (0069-0195-01) </PackageDescription>
<NDC11Code>00069-0195-02</NDC11Code>
<ProductNDC>0069-0195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>2500</StrengthNumber>
<StrengthUnit>[iU]/.2mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0196-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0196-02) / .2 mL in 1 SYRINGE (0069-0196-01) </PackageDescription>
<NDC11Code>00069-0196-02</NDC11Code>
<ProductNDC>0069-0196</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[iU]/.2mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0206-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0206-02) / .3 mL in 1 SYRINGE (0069-0206-01) </PackageDescription>
<NDC11Code>00069-0206-02</NDC11Code>
<ProductNDC>0069-0206</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>7500</StrengthNumber>
<StrengthUnit>[iU]/.3mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0217-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0217-02) / 1 mL in 1 SYRINGE (0069-0217-01) </PackageDescription>
<NDC11Code>00069-0217-02</NDC11Code>
<ProductNDC>0069-0217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0220-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0220-02) / .5 mL in 1 SYRINGE (0069-0220-01) </PackageDescription>
<NDC11Code>00069-0220-02</NDC11Code>
<ProductNDC>0069-0220</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>12500</StrengthNumber>
<StrengthUnit>[iU]/.5mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0223-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0223-02) / .6 mL in 1 SYRINGE (0069-0223-01) </PackageDescription>
<NDC11Code>00069-0223-02</NDC11Code>
<ProductNDC>0069-0223</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>15000</StrengthNumber>
<StrengthUnit>[iU]/.6mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0228-02</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0069-0228-02) / .72 mL in 1 SYRINGE (0069-0228-01) </PackageDescription>
<NDC11Code>00069-0228-02</NDC11Code>
<ProductNDC>0069-0228</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>18000</StrengthNumber>
<StrengthUnit>[iU]/.72mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0232-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0069-0232-01) / 3.8 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00069-0232-01</NDC11Code>
<ProductNDC>0069-0232</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>25000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0069-0253-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0069-0253-10) / 4 mL in 1 VIAL, SINGLE-DOSE (0069-0253-01) </PackageDescription>
<NDC11Code>00069-0253-10</NDC11Code>
<ProductNDC>0069-0253</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fragmin</ProprietaryName>
<NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20221017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020287</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>DALTEPARIN SODIUM</SubstanceName>
<StrengthNumber>2500</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
<Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
</NDC>
<NDC>
<NDCCode>0404-9945-50</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (0404-9945-50) / 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>00404-9945-50</NDC11Code>
<ProductNDC>0404-9945</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20220112</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018304</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of SENSORCAINE / SENSORCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use. Not all blocks are indicated for use with SENSORCAINE / SENSORCAINE WITH EPINEPHRINE given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.4, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C18H28N2O·HCl·H2O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C9H13NO3·C4H6O6, with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure. SENSORCAINE-MPFin single dose vials is a sterile, isotonic, clear, colorless, and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg, or 7.5 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE-MPF WITH EPINEPHRINE 1:200,000(as bitartrate) in single dose vials is a sterile, isotonic, clear, colorless to slightly yellow and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg or 7.5 mg bupivacaine hydrochloride anhydrous; respectively), 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5. SENSORCAINEin multiple dose vials is a sterile, isotonic, clear, colorless solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 g sodium chloride for isotonicity, 1 mg of methyl paraben as an antiseptic preservative and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE WITH EPINEPHRINE 1:200,000(as bitartrate) in multiple dose vials is a sterile, isotonic, clear, colorless to slightly yellow solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 1 mg methylparaben as an antiseptic preservative, 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>0404-9946-10</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (0404-9946-10) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00404-9946-10</NDC11Code>
<ProductNDC>0404-9946</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine Mpf</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20220112</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070553</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of SENSORCAINE / SENSORCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use. Not all blocks are indicated for use with SENSORCAINE / SENSORCAINE WITH EPINEPHRINE given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.4, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C18H28N2O·HCl·H2O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C9H13NO3·C4H6O6, with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure. SENSORCAINE-MPF in single dose vials is a sterile, isotonic, clear, colorless, and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg, or 7.5 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE-MPF WITH EPINEPHRINE 1:200,000 (as bitartrate) in single dose vials is a sterile, isotonic, clear, colorless to slightly yellow and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg or 7.5 mg bupivacaine hydrochloride anhydrous; respectively), 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5. SENSORCAINE in multiple dose vials is a sterile, isotonic, clear, colorless solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 g sodium chloride for isotonicity, 1 mg of methyl paraben as an antiseptic preservative and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE WITH EPINEPHRINE 1:200,000 (as bitartrate) in multiple dose vials is a sterile, isotonic, clear, colorless to slightly yellow solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 1 mg methylparaben as an antiseptic preservative, 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>0409-1555-54</NDCCode>
<PackageDescription>12 BAG in 1 CASE (0409-1555-54) / 500 mL in 1 BAG (0409-1555-64) </PackageDescription>
<NDC11Code>00409-1555-54</NDC11Code>
<ProductNDC>0409-1555</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hextend</ProprietaryName>
<NonProprietaryName>Hetastarch</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN200952</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>HETASTARCH</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Intravascular Volume [PE], Osmotic Activity [MoA], Plasma Volume Expander [EPC], Starch [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HEXTEND (6% Hetastarch in Lactated Electrolyte Injection) is indicated in the treatment of hypovolemia when plasma volume expansion is desired in settings where adequate alternative treatment is unavailable. It is not a substitute for blood or plasma.</IndicationAndUsage>
<Description>HEXTEND® (6% Hetastarch in Lactated Electrolyte Injection) is a sterile, nonpyrogenic solution for intravenous administration. The composition, pH, and osmolarity are given in Table 1 and the electrolyte composition in Table 2. HEXTEND (6% Hetastarch in Lactated Electrolyte Injection) is an artificial colloidal solution, pharmacologically classified as a plasma volume expander, and is intended to support oncotic pressure as well as provide electrolytes. HEXTEND contains high molecular weight hetastarch at a concentration of 6% as an oncotic agent to permit retention of intravascular fluid until the hetastarch is replaced by blood proteins. Hetastarch is an artificial colloid derived from a waxy starch composed almost entirely of amylopectin. Hydroxyethyl ether groups are introduced into the glucose units of the starch, and the resultant material is hydrolyzed to yield a product with a molecular weight suitable for use as a plasma volume expander. Hetastarch is characterized by its molar substitution and also by its molecular weight. The molar substitution is approximately 0.75 which means hetastarch has an average of approximately 75 hydroxyethyl groups for every 100 glucose units. The weight average molecular weight is approximately 670,000 with a range of 450,000 to 800,000 and with at least 80% of the polymer units falling within the range of 20,000 to 2,500,000. Hydroxyethyl groups are attached by ether linkage primarily at C-2 of the glucose unit and to a lesser extent at C-3 and C-6. The polymer resembles glycogen, and the polymerized D-glucose units are joined primarily by α-1,4 linkages with occasional α-1,6 branching linkages. The degree of branching is approximately 1:20 which means that there is an average of approximately one α-1,6 branch for every 20 glucose monomer units. The chemical name for hetastarch is hydroxyethyl starch. The structural formula is as follows. Amylopectin derivative in which R2 and R3 are H or CH2CH2OH and R6 is H, CH2CH2OH, or a branching point in the starch polymer connected through an α-1,6 link to additional D-glucopyranosyl units. HEXTEND is a clear, pale yellow to amber solution. Exposure to prolonged adverse storage conditions may result in a change to a turbid deep brown or the formation of a crystalline precipitate. Do not use the solution if these conditions are evident. HEXTEND is formulated with normal physiological levels of calcium. Calcium chloride in water dissociates to provide calcium (Ca++) and chloride (Cl-) ions. These are the normal constituents of the body fluids and are dependent on various physiologic mechanisms for maintenance of balance between intake and output. Approximately 80% of body calcium is excreted in the feces as insoluble salts; urinary excretion accounts for the remaining 20%. HEXTEND also contains normal physiological levels of sodium. Additionally, chloride is present at levels closer to those normally found in blood than in plasma expanders in 0.9% Sodium Chloride Injection. Sodium chloride in water dissociates to provide sodium (Na+) and chloride (Cl-) ions. Sodium (Na+) is the principal cation of the extracellular fluid and plays a large part in the therapy of fluid and electrolyte disturbances. Chloride (Cl-) has an integral role in buffering action when oxygen and carbon dioxide exchange occurs in the red blood cells. The distribution and excretion of sodium (Na+) and chloride (Cl-) are largely under the control of the kidneys, which maintain a balance between intake and output. HEXTEND also contains slightly lower than normal physiological levels of potassium and magnesium. Potassium chloride in water dissociates to provide potassium (K+) and chloride (Cl-) ions. Potassium is found in low concentrations in plasma and extracellular fluids (3.5 to 5.0 mEq/L in a healthy adult). It is the most abundant cation within the body's cells (160 mEq/L of intracellular water). Potassium plays an important role in electrolyte balance. Normally about 80 to 90% of the potassium intake is excreted in the urine with the remainder in the stools and, to a small extent, in the perspiration. The kidney does not conserve potassium well so that during fasting or in patients on a potassium-free diet, potassium loss from the body continues thereby resulting in potassium depletion. Magnesium chloride in water dissociates to provide magnesium (Mg++) and chloride (Cl-). Magnesium is largely an intracellular ion with low concentrations (1.5 to 2.5 mEq/L) found in plasma. Dextrose is included in the formulation. Solutions containing carbohydrate in the form of dextrose yield blood glucose, provide calories, and may also aid in minimizing liver glycogen depletion thereby exerting a protein sparing effect. Dextrose injected parenterally undergoes oxidation to carbon dioxide and water. Lactate is provided at 28 mEq/L. Sodium lactate in water dissociates to provide sodium (Na+) and lactate (C3H5O3-) ions. The lactate anion provides an alkaline effect resulting from simultaneous removal of lactate and hydrogen ions by the liver. In the liver, the lactate is metabolized to glycogen, which is ultimately converted to carbon dioxide and water by oxidative metabolism. The lactate anion acts as a source (alternate) of bicarbonate when normal production and utilization of lactic acid is not impaired as a result of disordered lactate metabolism. Since metabolic conversion is dependent on the integrity of cellular oxidative processes, lactate may be inadequate or ineffective as a source of bicarbonate in patients suffering from acidosis associated with shock or other disorders involving reduced perfusion of body tissues. When oxidative activity is intact, one to two hours is required for metabolism of lactate. Water is an essential constituent of all body tissues and accounts for approximately 70% of total body weight. The average normal adult daily requirement ranges from 2 to 3 L (1.0 to 1.5 L each for insensible water loss by perspiration and urine production). Water balance is maintained by various regulatory mechanisms. Water distribution depends primarily on the concentration of electrolytes in the body compartments, and sodium (Na+) plays a major role in maintaining physiological equilibrium. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The container solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>10147-1700-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (10147-1700-3) </PackageDescription>
<NDC11Code>10147-1700-03</NDC11Code>
<ProductNDC>10147-1700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Itraconazole</ProprietaryName>
<NonProprietaryName>Itraconazole</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020083</ApplicationNumber>
<LabelerName>Patriot Pharmaceuticals</LabelerName>
<SubstanceName>ITRACONAZOLE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Itraconazole Capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients: : 1 Blastomycosis, pulmonary and extrapulmonary, 2 Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and, 3 Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy.</IndicationAndUsage>
<Description>Itraconazole is an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[( R*)- sec-butyl]-4-[ p-[4-[ p-[[(2 R*,4 S*)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one mixture with (±)-1-[( R*)- sec-butyl]-4-[ p-[4-[ p-[[(2 S*,4 R*)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one. or. (±)-1-[( RS)- sec-butyl]-4-[ p-[4-[ p-[[(2 R,4 S)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C 35H 38Cl 2N 8O 4and a molecular weight of 705.64. It is a white to slightly yellowish powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. Itraconazole Capsules contain 100 mg of itraconazole coated on sugar spheres (composed of sucrose, maize starch, and purified water). Inactive ingredients are hard gelatin capsule, hypromellose, polyethylene glycol (PEG) 20,000, titanium dioxide, FD&C Blue No. 1, FD&C Blue No. 2, D&C Red No. 22 and D&C Red No. 28. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>16729-271-10</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (16729-271-10) </PackageDescription>
<NDC11Code>16729-0271-10</NDC11Code>
<ProductNDC>16729-271</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Itraconazole</ProprietaryName>
<NonProprietaryName>Itraconazole</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170530</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205991</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>ITRACONAZOLE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170530</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Itraconazole capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients: : 1 Blastomycosis, pulmonary and extrapulmonary , 2 Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and , 3 Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy. .</IndicationAndUsage>
<Description>Itraconazole is an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[( R*)- sec-butyl]-4-[ p-[4-[ p-[[(2 R*,4 S*)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one mixture with (±)-1-[( R*)- sec-butyl]-4-[ p-[4-[ p-[[(2 S*,4 R*)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one. or. (±)-1-[( RS)- sec-butyl]-4-[ p-[4-[ p-[[(2 R,4 S)-2-(2,4-dichlorophenyl)-2-(1 H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C 35H 38Cl 2N 8O 4 and a molecular weight of 705.64. It is a white to slightly yellowish powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. Itraconazole capsules contain 100 mg of itraconazole coated on sugar spheres. Inactive ingredients are hard gelatin capsule, hypromellose, polyglykol (PEG 20,000), purified talc, and sugar spheres (maize starch and sucrose). Components of the gelatin capsule include FD&C Blue No. 1, FD&C Blue No. 2, gelatin, D&C Red No. 28, and titanium dioxide. The printing ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50458-290-01</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (50458-290-01) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>50458-0290-01</NDC11Code>
<ProductNDC>50458-290</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sporanox</ProprietaryName>
<NonProprietaryName>Itraconazole</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19920911</StartMarketingDate>
<EndMarketingDate>20261130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020083</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ITRACONAZOLE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19920911</StartMarketingDatePackage>
<EndMarketingDatePackage>20261130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SPORANOX® (itraconazole) Capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients: 1 Blastomycosis, pulmonary and extrapulmonary, 2 Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and, 3 Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy.</IndicationAndUsage>
<Description>SPORANOX® is the brand name for itraconazole, an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2R*,4S*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one mixture with (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2S*,4R*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. or. (±)-1-[(RS)-sec-butyl]-4-[p-[4-[p-[[(2R,4S)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C35H38Cl2N8O4 and a molecular weight of 705.64. It is a white to slightly yellowish powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. SPORANOX® Capsules contain 100 mg of itraconazole coated on sugar spheres (composed of sucrose, maize starch, and purified water). Inactive ingredients are hard gelatin capsule, hypromellose, polyethylene glycol (PEG) 20,000, titanium dioxide, FD&C Blue No. 1, FD&C Blue No. 2, D&C Red No. 22 and D&C Red No. 28. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>50458-290-04</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (50458-290-04) </PackageDescription>
<NDC11Code>50458-0290-04</NDC11Code>
<ProductNDC>50458-290</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sporanox</ProprietaryName>
<NonProprietaryName>Itraconazole</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19920911</StartMarketingDate>
<EndMarketingDate>20261130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020083</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ITRACONAZOLE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19920911</StartMarketingDatePackage>
<EndMarketingDatePackage>20261130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SPORANOX® (itraconazole) Capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients: 1 Blastomycosis, pulmonary and extrapulmonary, 2 Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and, 3 Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy.</IndicationAndUsage>
<Description>SPORANOX® is the brand name for itraconazole, an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2R*,4S*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one mixture with (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2S*,4R*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. or. (±)-1-[(RS)-sec-butyl]-4-[p-[4-[p-[[(2R,4S)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C35H38Cl2N8O4 and a molecular weight of 705.64. It is a white to slightly yellowish powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. SPORANOX® Capsules contain 100 mg of itraconazole coated on sugar spheres (composed of sucrose, maize starch, and purified water). Inactive ingredients are hard gelatin capsule, hypromellose, polyethylene glycol (PEG) 20,000, titanium dioxide, FD&C Blue No. 1, FD&C Blue No. 2, D&C Red No. 22 and D&C Red No. 28. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>63148-000-50</NDCCode>
<PackageDescription>1500 mL in 1 BOTTLE, PLASTIC (63148-000-50) </PackageDescription>
<NDC11Code>63148-0000-50</NDC11Code>
<ProductNDC>63148-000</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Shopko Blue Mint</ProprietaryName>
<NonProprietaryName>Eucalyptol, Menthol, Methyl Salicylate, Thymol</NonProprietaryName>
<DosageFormName>MOUTHWASH</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180607</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part356</ApplicationNumber>
<LabelerName>Apollo Health and Beauty Care Inc.</LabelerName>
<SubstanceName>EUCALYPTOL; MENTHOL; METHYL SALICYLATE; THYMOL</SubstanceName>
<StrengthNumber>.92; .42; .6; .64</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180607</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps reduce plaque that leads to: 1 gingivitis, 2 bleeding gums.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68151-2718-0</NDCCode>
<PackageDescription>1 CAPSULE in 1 PACKAGE (68151-2718-0)</PackageDescription>
<NDC11Code>68151-2718-00</NDC11Code>
<ProductNDC>68151-2718</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Itraconazole</ProprietaryName>
<NonProprietaryName>Itraconazole</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020083</ApplicationNumber>
<LabelerName>Carilion Materials Management</LabelerName>
<SubstanceName>ITRACONAZOLE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC],Azoles [CS],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA],Breast Cancer Resistance Protein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Itraconazole Capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients: 1 Blastomycosis, pulmonary and extrapulmonary, 2 Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and, 3 Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy.</IndicationAndUsage>
<Description>Itraconazole is an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2R*,4S*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one mixture with (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2S*,4R*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. or. (±)-1-[(RS)-sec-butyl]-4-[p-[4-[p-[[(2R,4S)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C35H38Cl2N8O4 and a molecular weight of 705.64. It is a white to slightly yellowish powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. Itraconazole Capsules contain 100 mg of itraconazole coated on sugar spheres (composed of sucrose, maize starch, and purified water). Inactive ingredients are hard gelatin capsule, hypromellose, polyethylene glycol (PEG) 20,000, titanium dioxide, FD&C Blue No. 1, FD&C Blue No. 2, D&C Red No. 22 and D&C Red No. 28.</Description>
</NDC>
<NDC>
<NDCCode>71205-859-64</NDCCode>
<PackageDescription>240 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (71205-859-64) </PackageDescription>
<NDC11Code>71205-0859-64</NDC11Code>
<ProductNDC>71205-859</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213247</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride extended-release tablets contain the biguanidine antihyperglycemic agent, metformin, in the form of monohydrochloride salt. The chemical name of metformin HCl is N, N-dimethylimidodicarbonimidic diamide hydrochloride with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Its structural formula is. Metformin HCl is a white to off-white crystalline powder that is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. Metformin hydrochloride extended-release tablets deliver 500 mg or 1,000 mg of metformin HCl, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. In addition to the active ingredient metformin HCl, each tablet contains the following inactive ingredients: crospovidone, povidone (K-30, K-90), pregelatinised starch, magnesium stearate, sodium lauryl sulfate, hydroxypropyl cellulose, talc, cellulose acetate, polyethylene glycol (PEG 400, PEG 3350), triacetin, polyvinyl alcohol, titanium dioxide, black iron oxide, propylene glycol and hypromellose. FDA approved dissolution test specifications differ from the USP.</Description>
</NDC>
<NDC>
<NDCCode>71205-860-64</NDCCode>
<PackageDescription>240 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (71205-860-64) </PackageDescription>
<NDC11Code>71205-0860-64</NDC11Code>
<ProductNDC>71205-860</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213247</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride extended-release tablets contain the biguanidine antihyperglycemic agent, metformin, in the form of monohydrochloride salt. The chemical name of metformin HCl is N, N-dimethylimidodicarbonimidic diamide hydrochloride with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Its structural formula is. Metformin HCl is a white to off-white crystalline powder that is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. Metformin hydrochloride extended-release tablets deliver 500 mg or 1,000 mg of metformin HCl, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. In addition to the active ingredient metformin HCl, each tablet contains the following inactive ingredients: crospovidone, povidone (K-30, K-90), pregelatinised starch, magnesium stearate, sodium lauryl sulfate, hydroxypropyl cellulose, talc, cellulose acetate, polyethylene glycol (PEG 400, PEG 3350), triacetin, polyvinyl alcohol, titanium dioxide, black iron oxide, propylene glycol and hypromellose. FDA approved dissolution test specifications differ from the USP.</Description>
</NDC>
<NDC>
<NDCCode>72146-000-01</NDCCode>
<PackageDescription>295 mL in 1 BOTTLE (72146-000-01) </PackageDescription>
<NDC11Code>72146-0000-01</NDC11Code>
<ProductNDC>72146-000</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Global Care Hand Sanitizer Isopropyl Alcohol</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200401</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>TARGET PRICE INC</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>.64</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-11-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>80753-000-01</NDCCode>
<PackageDescription>1 PATCH in 1 PACKAGE (80753-000-01) > 14.79 mL in 1 PATCH</PackageDescription>
<NDC11Code>80753-0000-01</NDC11Code>
<ProductNDC>80753-000</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Clean Towel Sanitizing Cloth</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201009</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>White Towel Service Inc</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>.64</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>84677-052-18</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (84677-052-18) </PackageDescription>
<NDC11Code>84677-0052-18</NDC11Code>
<ProductNDC>84677-052</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sitagliptin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Sitagliptin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202426</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>SITAGLIPTIN PHOSPHATE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sitagliptin and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. : 1 Limitations of Use.</IndicationAndUsage>
<Description>Sitagliptin and metformin hydrochloride tablets for oral use contain two antihyperglycemic drugs: sitagliptin and metformin HCl. Sitagliptin. Sitagliptin is an orally-active inhibitor of the dipeptidyl peptidase-4 (DPP-4) enzyme. Sitagliptin is present in sitagliptin and metformin hydrochloride tablets in the form of sitagliptin phosphate monohydrate. Sitagliptin phosphate monohydrate is described chemically as 7-[( R)-3-Amino-4-(2,4,5-trifluorophenyl)butanoyl]-3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3- a]pyrazine monophosphate monohydrate with a molecular formula of C 16H 15F 6N 5OH 3PO 4H 2O and a molecular weight of 523.32. The structural formula is:. Sitagliptin phosphate monohydrate is a white or almost white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in anhydrous ethanol and practically insoluble in heptane. Metformin HCl. Metformin HCl (N,N-dimethylimidodicarbonimidic diamide hydrochloride)is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. Metformin HCl is a white or almost white powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone and methylene chloride. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown:. Sitagliptin and Metformin Hydrochloride Tablets. Sitagliptin and metformin hydrochloride tablets are available as film-coated tablets containing: 1 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 500 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/500)., 2 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 1,000 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/1,000).</Description>
</NDC>
<NDC>
<NDCCode>84677-052-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (84677-052-60) </PackageDescription>
<NDC11Code>84677-0052-60</NDC11Code>
<ProductNDC>84677-052</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sitagliptin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Sitagliptin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202426</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>SITAGLIPTIN PHOSPHATE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sitagliptin and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. : 1 Limitations of Use.</IndicationAndUsage>
<Description>Sitagliptin and metformin hydrochloride tablets for oral use contain two antihyperglycemic drugs: sitagliptin and metformin HCl. Sitagliptin. Sitagliptin is an orally-active inhibitor of the dipeptidyl peptidase-4 (DPP-4) enzyme. Sitagliptin is present in sitagliptin and metformin hydrochloride tablets in the form of sitagliptin phosphate monohydrate. Sitagliptin phosphate monohydrate is described chemically as 7-[( R)-3-Amino-4-(2,4,5-trifluorophenyl)butanoyl]-3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3- a]pyrazine monophosphate monohydrate with a molecular formula of C 16H 15F 6N 5OH 3PO 4H 2O and a molecular weight of 523.32. The structural formula is:. Sitagliptin phosphate monohydrate is a white or almost white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in anhydrous ethanol and practically insoluble in heptane. Metformin HCl. Metformin HCl (N,N-dimethylimidodicarbonimidic diamide hydrochloride)is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. Metformin HCl is a white or almost white powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone and methylene chloride. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown:. Sitagliptin and Metformin Hydrochloride Tablets. Sitagliptin and metformin hydrochloride tablets are available as film-coated tablets containing: 1 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 500 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/500)., 2 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 1,000 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/1,000).</Description>
</NDC>
<NDC>
<NDCCode>84677-053-18</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (84677-053-18) </PackageDescription>
<NDC11Code>84677-0053-18</NDC11Code>
<ProductNDC>84677-053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sitagliptin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Sitagliptin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202426</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>SITAGLIPTIN PHOSPHATE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50; 1000</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sitagliptin and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. : 1 Limitations of Use.</IndicationAndUsage>
<Description>Sitagliptin and metformin hydrochloride tablets for oral use contain two antihyperglycemic drugs: sitagliptin and metformin HCl. Sitagliptin. Sitagliptin is an orally-active inhibitor of the dipeptidyl peptidase-4 (DPP-4) enzyme. Sitagliptin is present in sitagliptin and metformin hydrochloride tablets in the form of sitagliptin phosphate monohydrate. Sitagliptin phosphate monohydrate is described chemically as 7-[( R)-3-Amino-4-(2,4,5-trifluorophenyl)butanoyl]-3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3- a]pyrazine monophosphate monohydrate with a molecular formula of C 16H 15F 6N 5OH 3PO 4H 2O and a molecular weight of 523.32. The structural formula is:. Sitagliptin phosphate monohydrate is a white or almost white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in anhydrous ethanol and practically insoluble in heptane. Metformin HCl. Metformin HCl (N,N-dimethylimidodicarbonimidic diamide hydrochloride)is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. Metformin HCl is a white or almost white powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone and methylene chloride. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown:. Sitagliptin and Metformin Hydrochloride Tablets. Sitagliptin and metformin hydrochloride tablets are available as film-coated tablets containing: 1 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 500 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/500)., 2 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 1,000 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/1,000).</Description>
</NDC>
<NDC>
<NDCCode>84677-053-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (84677-053-60) </PackageDescription>
<NDC11Code>84677-0053-60</NDC11Code>
<ProductNDC>84677-053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sitagliptin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Sitagliptin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202426</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>SITAGLIPTIN PHOSPHATE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50; 1000</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sitagliptin and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. : 1 Limitations of Use.</IndicationAndUsage>
<Description>Sitagliptin and metformin hydrochloride tablets for oral use contain two antihyperglycemic drugs: sitagliptin and metformin HCl. Sitagliptin. Sitagliptin is an orally-active inhibitor of the dipeptidyl peptidase-4 (DPP-4) enzyme. Sitagliptin is present in sitagliptin and metformin hydrochloride tablets in the form of sitagliptin phosphate monohydrate. Sitagliptin phosphate monohydrate is described chemically as 7-[( R)-3-Amino-4-(2,4,5-trifluorophenyl)butanoyl]-3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3- a]pyrazine monophosphate monohydrate with a molecular formula of C 16H 15F 6N 5OH 3PO 4H 2O and a molecular weight of 523.32. The structural formula is:. Sitagliptin phosphate monohydrate is a white or almost white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in anhydrous ethanol and practically insoluble in heptane. Metformin HCl. Metformin HCl (N,N-dimethylimidodicarbonimidic diamide hydrochloride)is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. Metformin HCl is a white or almost white powder with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone and methylene chloride. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown:. Sitagliptin and Metformin Hydrochloride Tablets. Sitagliptin and metformin hydrochloride tablets are available as film-coated tablets containing: 1 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 500 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/500)., 2 64.25 mg sitagliptin monohydrate equivalent to 50 mg of sitagliptin and 1,000 mg metformin HCl (Sitagliptin and metformin hydrochloride tablets 50/1,000).</Description>
</NDC>
</NDCList>