{
"NDC": [
{
"NDCCode": "65862-559-10",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (65862-559-10) / 10 TABLET, DELAYED RELEASE in 1 BLISTER PACK",
"NDC11Code": "65862-0559-10",
"ProductNDC": "65862-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202038",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120928",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets, USP a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium USP is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium USP is supplied as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.56 mg of pantoprazole sodium USP) and 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: calcium stearate, crospovidone, ferric oxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer dispersion, sodium carbonate, and triethyl citrate. The tablets are imprinted with brown ink containing ammonium hydroxide, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, N-butyl alcohol, propylene glycol, and shellac glaze in ethanol. Pantoprazole sodium delayed-release tablets (40 mg and 20 mg) complies USP dissolution test 3."
},
{
"NDCCode": "65862-559-55",
"PackageDescription": "15000 TABLET, DELAYED RELEASE in 1 BAG (65862-559-55) ",
"NDC11Code": "65862-0559-55",
"ProductNDC": "65862-559",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"StartMarketingDate": "20120928",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Unfinished",
"LastUpdate": "2026-02-21",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "28-SEP-12"
},
{
"NDCCode": "65862-559-90",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (65862-559-90) ",
"NDC11Code": "65862-0559-90",
"ProductNDC": "65862-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202038",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120928",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets, USP a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium USP is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium USP is supplied as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.56 mg of pantoprazole sodium USP) and 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: calcium stearate, crospovidone, ferric oxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer dispersion, sodium carbonate, and triethyl citrate. The tablets are imprinted with brown ink containing ammonium hydroxide, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, N-butyl alcohol, propylene glycol, and shellac glaze in ethanol. Pantoprazole sodium delayed-release tablets (40 mg and 20 mg) complies USP dissolution test 3."
},
{
"NDCCode": "65862-559-99",
"PackageDescription": "1000 TABLET, DELAYED RELEASE in 1 BOTTLE (65862-559-99) ",
"NDC11Code": "65862-0559-99",
"ProductNDC": "65862-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202038",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120928",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets, USP a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium USP is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium USP is supplied as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.56 mg of pantoprazole sodium USP) and 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: calcium stearate, crospovidone, ferric oxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer dispersion, sodium carbonate, and triethyl citrate. The tablets are imprinted with brown ink containing ammonium hydroxide, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, N-butyl alcohol, propylene glycol, and shellac glaze in ethanol. Pantoprazole sodium delayed-release tablets (40 mg and 20 mg) complies USP dissolution test 3."
},
{
"NDCCode": "50228-559-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (50228-559-10) ",
"NDC11Code": "50228-0559-10",
"ProductNDC": "50228-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brivaracetam",
"NonProprietaryName": "Brivaracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219952",
"LabelerName": "ScieGen Pharmaceuticals, Inc.",
"SubstanceName": "BRIVARACETAM",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Epoxide Hydrolase Inhibitors [MoA]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260327",
"SamplePackage": "N",
"IndicationAndUsage": "Brivaracetam is indicated for the treatment of partial-onset seizures in patients 1 month of age and older.",
"Description": "The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyltetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is:. Brivaracetam is a white to off-white crystalline powder. It is very soluble in water, ethanol, and methanol. It is freely soluble in acetonitrile and acetone and soluble in toluene. It is very slightly soluble in n-hexane. Tablets. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and film coating agent contains polyethylene glycol 3350, polyethylene glycol 8000, polyvinyl alcohol, talc, and titanium dioxide."
},
{
"NDCCode": "52584-559-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 BAG (52584-559-10) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "52584-0559-10",
"ProductNDC": "52584-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Marcaine",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20100801",
"EndMarketingDate": "20230701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016964",
"LabelerName": "General Injectables & Vaccines, Inc",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20100801",
"EndMarketingDatePackage": "20230701",
"SamplePackage": "N"
},
{
"NDCCode": "55289-559-10",
"PackageDescription": "10 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE, PLASTIC (55289-559-10) ",
"NDC11Code": "55289-0559-10",
"ProductNDC": "55289-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20070802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077557",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "ONDANSETRON",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA],Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-08-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20100106",
"SamplePackage": "N"
},
{
"NDCCode": "58411-559-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (58411-559-10) / 35 mL in 1 BOTTLE",
"NDC11Code": "58411-0559-10",
"ProductNDC": "58411-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cle De Peau Beaute Radiant Fluid Foundation",
"ProprietaryNameSuffix": "Bf60",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200701",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "SHISEIDO AMERICAS CORPORATION",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "2.72118",
"StrengthUnit": "g/35mL",
"Status": "Active",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200701",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "60846-559-10",
"PackageDescription": "10 CARTON in 1 BAG (60846-559-10) / 1 BLISTER PACK in 1 CARTON (60846-559-27) / 7 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "60846-0559-10",
"ProductNDC": "60846-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pyridostigmine Bromide",
"NonProprietaryName": "Pyridostigmine Bromide",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20241009",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217604",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "PYRIDOSTIGMINE BROMIDE",
"StrengthNumber": "105",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241009",
"SamplePackage": "N",
"IndicationAndUsage": "Pyridostigmine bromide is indicated for pretreatment against the lethal effects of soman nerve agent poisoning in adults. Pyridostigmine bromide is intended for use in conjunction with protective garments, including a mask. At the first sign of nerve agent poisoning, pyridostigmine bromide should be stopped, and atropine and pralidoxime therapy started immediately. The evidence for the effectiveness of pyridostigmine bromide as pretreatment against soman-induced toxicity was derived from animal studies alone [see Clinical Studies (14)]. FOR MILITARY MEDICAL USE ONLY.",
"Description": "Pyridostigmine bromide is an orally active, reversible cholinesterase inhibitor. Pyridostigmine bromide is a white or almost white, crystalline, deliquescent powder, very soluble in water and alcohol, and practically insoluble in ether. CAS registration number is 101-26-8. Pyridostigmine bromide has a molecular formula of C9H13BrN2O2, with a molecular weight of 261.12. Its chemical name is 3-hydroxy-1-methylpyridinium bromide dimethylcarbamate, and its structural formula is. Pyridostigmine bromide extended-release tablets contain 105 mg of pyridostigmine bromide (equivalent to 72.87 mg of pyridostigmine base) for oral administration. The inactive ingredients included in the tablet formula are ammonia methacrylate copolymer, ammonium hydroxide, black iron oxide, calcium carbonate, colloidal silicon dioxide, crospovidone, hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, magnesium stearate, mannitol, propylene glycol, shellac glaze, sodium bicarbonate, succinic acid, talc, titanium dioxide, and triethyl citrate."
},
{
"NDCCode": "60923-559-68",
"PackageDescription": "1 KIT in 1 CARTON (60923-559-68) * 10 mL in 1 VIAL, SINGLE-USE (60923-562-01) * 68 POUCH in 1 BOX / 1 SWAB in 1 POUCH",
"NDC11Code": "60923-0559-68",
"ProductNDC": "60923-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Elevidys",
"NonProprietaryName": "Delandistrogene Moxeparvovec-rokl",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230622",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125781",
"LabelerName": "Sarepta Therapeutics, Inc.",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230622",
"SamplePackage": "N",
"IndicationAndUsage": "ELEVIDYS is indicated for the treatment of patients 4 years of age and older with Duchenne muscular dystrophy (DMD), who are ambulatory and have a confirmed mutation in the DMD gene [see Clinical Pharmacology (12.2), Clinical Studies (14)].",
"Description": "ELEVIDYS (delandistrogene moxeparvovec-rokl) is a recombinant gene therapy designed to deliver the gene encoding the ELEVIDYS micro-dystrophin protein. ELEVIDYS is a non-replicating, recombinant, adeno-associated virus serotype rh74 (AAVrh74) based vector containing the ELEVIDYS micro-dystrophin transgene under the control of the MHCK7 promoter. The genome within the ELEVIDYS AAVrh74 vector contains no viral genes and consequently is incapable of replication or reversion to a replicating form. The micro-dystrophin protein expressed by ELEVIDYS is a shortened version (138 kDa, compared to 427 kDa size of dystrophin expressed in normal muscle cells) that contains selected domains of dystrophin expressed in normal muscle cells. ELEVIDYS is a preservative-free, sterile, clear, colorless liquid that may have some opalescence and may contain white to off-white particles. ELEVIDYS is a suspension for intravenous infusion with a nominal concentration of 1.33 ×1013 vg/mL and supplied in a single-dose 10 mL vial. Each vial contains an extractable volume of 10 mL and the following excipients: 200mM sodium chloride, 13 mM tromethamine HCl, 7 mM tromethamine, 1mM magnesium chloride, 0.001% poloxamer 188, with a pH of 8.0 ± 0.3."
},
{
"NDCCode": "62037-559-10",
"PackageDescription": "1000 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (62037-559-10) ",
"NDC11Code": "62037-0559-10",
"ProductNDC": "62037-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20080825",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077419",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20080825",
"SamplePackage": "N"
},
{
"NDCCode": "62157-559-01",
"PackageDescription": "10 g in 1 JAR (62157-559-01)",
"NDC11Code": "62157-0559-01",
"ProductNDC": "62157-559",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Bromfenac Sodium",
"DosageFormName": "POWDER",
"StartMarketingDate": "20180418",
"MarketingCategoryName": "BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING",
"LabelerName": "AX Pharmaceutical Corp",
"SubstanceName": "BROMFENAC SODIUM",
"StrengthNumber": "9.9",
"StrengthUnit": "g/10g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "62584-559-01",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (62584-559-01) > 10 TABLET in 1 BLISTER PACK (62584-559-11)",
"NDC11Code": "62584-0559-01",
"ProductNDC": "62584-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076003",
"LabelerName": "American Health Packaging",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2014-09-05"
},
{
"NDCCode": "63323-559-65",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (63323-559-65) / 1 SYRINGE in 1 BLISTER PACK (63323-559-63) / .3 mL in 1 SYRINGE",
"NDC11Code": "63323-0559-65",
"ProductNDC": "63323-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190423",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078990",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190423",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .",
"Description": "Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "63323-559-93",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (63323-559-93) / 1 SYRINGE in 1 BLISTER PACK (63323-559-21) / .3 mL in 1 SYRINGE",
"NDC11Code": "63323-0559-93",
"ProductNDC": "63323-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190423",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078990",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190423",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .",
"Description": "Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "63739-559-10",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-559-10) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63739-0559-10",
"ProductNDC": "63739-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofloxacin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070426",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077859",
"LabelerName": "McKesson Corporation dba SKY Packaging",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC], Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20070426",
"SamplePackage": "N",
"IndicationAndUsage": "Ciprofloxacin tablet is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: 1 Skin and Skin Structure Infections ( 1.1) , 2 Bone and Joint Infections ( 1.2) , 3 Complicated Intra-Abdominal Infections ( 1.3) , 4 Infectious Diarrhea ( 1.4) , 5 Typhoid Fever (Enteric Fever) ( 1.5) , 6 Uncomplicated Cervical and Urethral Gonorrhea ( 1.6) , 7 Inhalational Anthrax post-exposure in adult and pediatric patients ( 1.7) , 8 Plague in adult and pediatric patients ( 1.8) , 9 Chronic Bacterial Prostatitis ( 1.9) , 10 Lower Respiratory Tract Infections ( 1.10) Acute Exacerbation of Chronic Bronchitis, 11 Urinary Tract Infections ( 1.11) Urinary Tract Infections (UTI)Acute Uncomplicated CystitisComplicated UTI and Pyelonephritis in Pediatric Patients, 12 Acute Sinusitis ( 1.12) .",
"Description": "Ciprofloxacin tablets, USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its molecular formula is C 17H 18FN 3O 3HClH 2O and its chemical structure is as follows:. Ciprofloxacin is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its molecular formula is C 17H 18FN 3O 3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows:. Ciprofloxacin film coated tablets are available in 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin tablets, USP are white to off-white. The inactive ingredients are colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "63824-559-99",
"PackageDescription": "60 CARTON in 1 CARTON (63824-559-99) > 8 BLISTER PACK in 1 CARTON > 10 TABLET, COATED in 1 BLISTER PACK",
"NDC11Code": "63824-0559-99",
"ProductNDC": "63824-559",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Acetaminophen, Diphenhydramine Hydrochloride, And Phenylephrine Hydrochloride",
"DosageFormName": "TABLET, COATED",
"StartMarketingDate": "20141115",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Reckitt Benckiser LLC",
"SubstanceName": "ACETAMINOPHEN; DIPHENHYDRAMINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 12.5; 5",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "68016-559-00",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (68016-559-00) / 10 GUM, CHEWING in 1 BLISTER PACK",
"NDC11Code": "68016-0559-00",
"ProductNDC": "68016-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine Polacrilex",
"ProprietaryNameSuffix": "Coated Mint",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "GUM, CHEWING",
"RouteName": "BUCCAL",
"StartMarketingDate": "20141001",
"EndMarketingDate": "20261231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078699",
"LabelerName": "Chain Drug Consortium, LLC",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20141001",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "68382-559-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (68382-559-10) ",
"NDC11Code": "68382-0559-10",
"ProductNDC": "68382-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrofurantoin Macrocrystals",
"NonProprietaryName": "Nitrofurantoin Macrocrystals",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205005",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "NITROFURANTOIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrofuran Antibacterial [EPC], Nitrofurans [CS]",
"Status": "Active",
"LastUpdate": "2023-11-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180215",
"SamplePackage": "N",
"IndicationAndUsage": "Nitrofurantoin macrocrystals capsules are specifically indicated for the treatment of urinary tract infections when due to susceptible strains of Escherichia coli, enterococci, Staphylococcus aureus, and certain susceptible strains of Klebsiella and Enterobacter species. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of nitrofurantoin macrocrystals capsules and other antibacterial drugs, nitrofurantoin macrocrystals capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with nitrofurantoin macrocrystals capsules are predisposed to persistence or reappearance of bacteriuria. Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with nitrofurantoin macrocrystals capsules, other therapeutic agents with broader tissue distribution should be selected. In considering the use of nitrofurantoin macrocrystals capsules, lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.",
"Description": "Nitrofurantoin capsules, USP (macrocrystals) is a synthetic chemical of controlled crystal size. It is a stable, lemon-yellow, crystalline compound. Nitrofurantoin capsules, USP (macrocrystals) is an antibacterial agent for specific urinary tract infections. It is available in 50 mg and 100 mg capsules for oral administration. 1-[[(5-nitro-2-furanyl)methylene] amino]-2,4-imidazolidinedione. Nitrofurantoin macrocrystals is a lemon-yellow crystalline compound. It is soluble in dimethylformamide, very slightly soluble in water and in alcohol. Each nitrofurantoin capsules, USP (macrocrystals) intended for oral administration contains 50 mg and 100 mg of nitrofurantoin macrocrystals. In addition, each capsule contains the following inactive ingredients: gelatin, lactose monohydrate, magnesium stearate, pregelatinized starch, talc and titanium dioxide. Additionally each 50 mg and 100 mg capsule shell contains FD & C Blue # 1, FD & C Red # 3 and sodium lauryl sulphate. The capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide, propylene glycol and shellac."
},
{
"NDCCode": "68382-559-30",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68382-559-30) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "68382-0559-30",
"ProductNDC": "68382-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrofurantoin Macrocrystals",
"NonProprietaryName": "Nitrofurantoin Macrocrystals",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205005",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "NITROFURANTOIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrofuran Antibacterial [EPC], Nitrofurans [CS]",
"Status": "Active",
"LastUpdate": "2023-11-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180215",
"SamplePackage": "N",
"IndicationAndUsage": "Nitrofurantoin macrocrystals capsules are specifically indicated for the treatment of urinary tract infections when due to susceptible strains of Escherichia coli, enterococci, Staphylococcus aureus, and certain susceptible strains of Klebsiella and Enterobacter species. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of nitrofurantoin macrocrystals capsules and other antibacterial drugs, nitrofurantoin macrocrystals capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with nitrofurantoin macrocrystals capsules are predisposed to persistence or reappearance of bacteriuria. Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with nitrofurantoin macrocrystals capsules, other therapeutic agents with broader tissue distribution should be selected. In considering the use of nitrofurantoin macrocrystals capsules, lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.",
"Description": "Nitrofurantoin capsules, USP (macrocrystals) is a synthetic chemical of controlled crystal size. It is a stable, lemon-yellow, crystalline compound. Nitrofurantoin capsules, USP (macrocrystals) is an antibacterial agent for specific urinary tract infections. It is available in 50 mg and 100 mg capsules for oral administration. 1-[[(5-nitro-2-furanyl)methylene] amino]-2,4-imidazolidinedione. Nitrofurantoin macrocrystals is a lemon-yellow crystalline compound. It is soluble in dimethylformamide, very slightly soluble in water and in alcohol. Each nitrofurantoin capsules, USP (macrocrystals) intended for oral administration contains 50 mg and 100 mg of nitrofurantoin macrocrystals. In addition, each capsule contains the following inactive ingredients: gelatin, lactose monohydrate, magnesium stearate, pregelatinized starch, talc and titanium dioxide. Additionally each 50 mg and 100 mg capsule shell contains FD & C Blue # 1, FD & C Red # 3 and sodium lauryl sulphate. The capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide, propylene glycol and shellac."
},
{
"NDCCode": "71919-559-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-559-10) ",
"NDC11Code": "71919-0559-10",
"ProductNDC": "71919-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Prunus Virginiana",
"NonProprietaryName": "Prunus Serotina Bark",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20101019",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "PRUNUS SEROTINA BARK",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20101019",
"SamplePackage": "N"
},
{
"NDCCode": "72603-559-01",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (72603-559-01) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "72603-0559-01",
"ProductNDC": "72603-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dorzolamide Hydrochloride And Timolol Maleate",
"NonProprietaryName": "Dorzolamide Hydrochloride And Timolol Maleate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20250601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207629",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE",
"StrengthNumber": "20; 5",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250601",
"SamplePackage": "N",
"IndicationAndUsage": "Dorzolamide hydrochloride and timolol maleate ophthalmic solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14)].",
"Description": "Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride USP is described chemically as: (4S-trans)-4-(ethylamino)-5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride is optically active. The specific rotation is: [α] 25°C (C=1, water) = ~ -17°. 405 nm Its molecular formula is C10H16N2O4S3HCl and its structural formula is. Dorzolamide hydrochloride USP has a molecular weight of 360.91. It is a white to off-white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate USP is described chemically as: (-)-1-(tert-butylamino)-3- [(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is: [α] 25°C in 1N HCl (C=5) = -12.2° (-11.7° to -12.5°). 405 nm Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate USP has a molecular weight of 432.50. It is a white to practically white powder which is soluble in water, methanol, and alcohol. Timolol maleate is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is supplied as a sterile, clear, colorless to nearly colorless, isotonic, buffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 to 323 mOsM. Each mL of Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP contains 20 mg dorzolamide (equivalent to 22.26 mg of dorzolamide hydrochloride USP) and 5 mg timolol (equivalent to 6.83 mg timolol maleate USP). Inactive ingredients are sodium citrate, hydroxyethyl cellulose, sodium hydroxide, mannitol, and water for injection. Benzalkonium chloride 0.0075% is added as a preservative."
},
{
"NDCCode": "72606-559-02",
"PackageDescription": "8 CARTON in 1 CARTON (72606-559-02) > 1 VIAL, SINGLE-DOSE in 1 CARTON (72606-559-01) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "72606-0559-02",
"ProductNDC": "72606-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Busulfan",
"NonProprietaryName": "Busulfan",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210931",
"LabelerName": "CELLTRION USA, INC.",
"SubstanceName": "BUSULFAN",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20191201",
"SamplePackage": "N",
"IndicationAndUsage": "Busulfan injection is indicated for use in combination with cyclophosphamide as a conditioning regimen prior to allogeneic hematopoietic progenitor cell transplantation for chronic myelogenous leukemia.",
"Description": "Busulfan is a bifunctional alkylating agent known chemically as 1,4-butanediol, dimethanesulfonate. Busulfan Injection is intended for intravenous administration. It is supplied as a clear, colorless, sterile, solution in 10 mL single-dose vials. Each vial of busulfan injection contains 60 mg (6 mg/mL) of busulfan, the active ingredient, a white crystalline powder with a molecular formula of CH3SO2O(CH2)4OSO2CH3 and a molecular weight of 246 g/mole. Busulfan has the following chemical structure. Busulfan is dissolved in N,N-dimethylacetamide (DMA), 3.3 mL and Polyethylene Glycol 400, NF 6.7 mL. The solubility of busulfan in water is 0.1 g per L and the pH of busulfan diluted to approximately 0.5 mg per mL busulfan in 0.9% Sodium Chloride Injection, USP or 5% Dextrose Injection, USP as recommended for infusion reflects the pH of the diluent used and ranges from 3.4 to 3.9."
},
{
"NDCCode": "83703-559-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BOX (83703-559-01) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "83703-0559-01",
"ProductNDC": "83703-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesnex",
"NonProprietaryName": "Mesna",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19881230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019884",
"LabelerName": "Bamboo US Bidco LCC",
"SubstanceName": "MESNA",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cytoprotective Agent [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19881230",
"SamplePackage": "N",
"IndicationAndUsage": "MESNEX is indicated as a prophylactic agent in reducing the incidence of ifosfamide-induced hemorrhagic cystitis. Limitation of Use: MESNEX is not indicated to reduce the risk of hematuria due to other pathological conditions such as thrombocytopenia.",
"Description": "MESNEX (mesna) is a detoxifying agent to inhibit the hemorrhagic cystitis induced by ifosfamide. The active ingredient, mesna, is a synthetic sulfhydryl compound designated as sodium-2-mercaptoethane sulfonate with a molecular formula of C 2H 5NaO 3S 2and a molecular weight of 164.18. Its structural formula is as follows:. HS–CH 2–CH 2SO 3–Na +. MESNEX injection is a sterile, nonpyrogenic, aqueous solution of clear and colorless appearance in clear glass multidose vials for intravenous administration. MESNEX injection contains 100 mg/mL mesna, 0.25 mg/mL edetate disodium and sodium hydroxide for pH adjustment. MESNEX injection multidose vials also contain 10.4 mg/mL of benzyl alcohol as a preservative. The solution has a pH range of 7.5-8.5. MESNEX tablets are white, oblong, scored biconvex film-coated tablets with the imprint M4. They contain 400 mg mesna. The excipients are calcium phosphate, cornstarch, hydroxypropylmethylcellulose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, simethicone, and titanium dioxide."
},
{
"NDCCode": "83703-559-03",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 BOX (83703-559-03) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "83703-0559-03",
"ProductNDC": "83703-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesnex",
"NonProprietaryName": "Mesna",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19881230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019884",
"LabelerName": "Bamboo US Bidco LCC",
"SubstanceName": "MESNA",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cytoprotective Agent [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19881230",
"SamplePackage": "N",
"IndicationAndUsage": "MESNEX is indicated as a prophylactic agent in reducing the incidence of ifosfamide-induced hemorrhagic cystitis. Limitation of Use: MESNEX is not indicated to reduce the risk of hematuria due to other pathological conditions such as thrombocytopenia.",
"Description": "MESNEX (mesna) is a detoxifying agent to inhibit the hemorrhagic cystitis induced by ifosfamide. The active ingredient, mesna, is a synthetic sulfhydryl compound designated as sodium-2-mercaptoethane sulfonate with a molecular formula of C 2H 5NaO 3S 2and a molecular weight of 164.18. Its structural formula is as follows:. HS–CH 2–CH 2SO 3–Na +. MESNEX injection is a sterile, nonpyrogenic, aqueous solution of clear and colorless appearance in clear glass multidose vials for intravenous administration. MESNEX injection contains 100 mg/mL mesna, 0.25 mg/mL edetate disodium and sodium hydroxide for pH adjustment. MESNEX injection multidose vials also contain 10.4 mg/mL of benzyl alcohol as a preservative. The solution has a pH range of 7.5-8.5. MESNEX tablets are white, oblong, scored biconvex film-coated tablets with the imprint M4. They contain 400 mg mesna. The excipients are calcium phosphate, cornstarch, hydroxypropylmethylcellulose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, simethicone, and titanium dioxide."
},
{
"NDCCode": "16714-559-01",
"PackageDescription": "90 TABLET in 1 BOTTLE (16714-559-01) ",
"NDC11Code": "16714-0559-01",
"ProductNDC": "16714-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220812",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077987",
"LabelerName": "NorthStar RxLLC",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220812",
"SamplePackage": "N",
"IndicationAndUsage": "Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient is chemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:, 6 o Primary dysbetalipoproteinemia., 7 o Hypertriglyceridemia.",
"Description": "Pravastatin sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake."
},
{
"NDCCode": "16714-559-02",
"PackageDescription": "500 TABLET in 1 BOTTLE (16714-559-02) ",
"NDC11Code": "16714-0559-02",
"ProductNDC": "16714-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220812",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077987",
"LabelerName": "NorthStar RxLLC",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220812",
"SamplePackage": "N",
"IndicationAndUsage": "Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient is chemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:, 6 o Primary dysbetalipoproteinemia., 7 o Hypertriglyceridemia.",
"Description": "Pravastatin sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake."
},
{
"NDCCode": "21130-559-58",
"PackageDescription": "1 TUBE in 1 CARTON (21130-559-58) / 14 g in 1 TUBE",
"NDC11Code": "21130-0559-58",
"ProductNDC": "21130-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Signature Care First Aid Antibiotic",
"NonProprietaryName": "Neomycin, Polymyxin B, Pramoxine Hcl",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151110",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M004",
"LabelerName": "Safeway",
"SubstanceName": "NEOMYCIN SULFATE; PRAMOXINE HYDROCHLORIDE; POLYMYXIN B SULFATE",
"StrengthNumber": "3.5; 10; 10000",
"StrengthUnit": "mg/g; mg/g; [USP'U]/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Active",
"LastUpdate": "2024-09-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151110",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent infection and for temporary relief of pain or discomfort in minor: 1 cuts , 2 scrapes , 3 burns."
},
{
"NDCCode": "43598-559-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (43598-559-05) ",
"NDC11Code": "43598-0559-05",
"ProductNDC": "43598-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160929",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206383",
"LabelerName": "Dr.Reddy�s Laboratories Inc",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2020-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160929",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole tablets are indicated for the treatment of: : 1 Schizophrenia [see CLINICAL STUDIES (14.1)].",
"Description": "Aripiprazole is a psychotropic drug that is available as tablets. Aripiprazole USP is 7-[4-[4-(2,3-dichlorophenyl)-1piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.39. The chemical structure is:. Aripiprazole Tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, colloidal silicon dioxide, isopropyl alcohol, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone. Colorants include ferric oxide (yellow or red) and FD&C Blue No. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "43598-559-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (43598-559-30) ",
"NDC11Code": "43598-0559-30",
"ProductNDC": "43598-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160929",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206383",
"LabelerName": "Dr.Reddy�s Laboratories Inc",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2020-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160929",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole tablets are indicated for the treatment of: : 1 Schizophrenia [see CLINICAL STUDIES (14.1)].",
"Description": "Aripiprazole is a psychotropic drug that is available as tablets. Aripiprazole USP is 7-[4-[4-(2,3-dichlorophenyl)-1piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.39. The chemical structure is:. Aripiprazole Tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, colloidal silicon dioxide, isopropyl alcohol, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone. Colorants include ferric oxide (yellow or red) and FD&C Blue No. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>65862-559-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (65862-559-10) / 10 TABLET, DELAYED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>65862-0559-10</NDC11Code>
<ProductNDC>65862-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202038</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120928</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets, USP a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium USP is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium USP is supplied as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.56 mg of pantoprazole sodium USP) and 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: calcium stearate, crospovidone, ferric oxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer dispersion, sodium carbonate, and triethyl citrate. The tablets are imprinted with brown ink containing ammonium hydroxide, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, N-butyl alcohol, propylene glycol, and shellac glaze in ethanol. Pantoprazole sodium delayed-release tablets (40 mg and 20 mg) complies USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>65862-559-55</NDCCode>
<PackageDescription>15000 TABLET, DELAYED RELEASE in 1 BAG (65862-559-55) </PackageDescription>
<NDC11Code>65862-0559-55</NDC11Code>
<ProductNDC>65862-559</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<StartMarketingDate>20120928</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-02-21</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>28-SEP-12</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>65862-559-90</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (65862-559-90) </PackageDescription>
<NDC11Code>65862-0559-90</NDC11Code>
<ProductNDC>65862-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202038</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120928</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets, USP a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium USP is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium USP is supplied as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.56 mg of pantoprazole sodium USP) and 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: calcium stearate, crospovidone, ferric oxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer dispersion, sodium carbonate, and triethyl citrate. The tablets are imprinted with brown ink containing ammonium hydroxide, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, N-butyl alcohol, propylene glycol, and shellac glaze in ethanol. Pantoprazole sodium delayed-release tablets (40 mg and 20 mg) complies USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>65862-559-99</NDCCode>
<PackageDescription>1000 TABLET, DELAYED RELEASE in 1 BOTTLE (65862-559-99) </PackageDescription>
<NDC11Code>65862-0559-99</NDC11Code>
<ProductNDC>65862-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202038</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120928</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets, USP a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium USP is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium USP is supplied as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.56 mg of pantoprazole sodium USP) and 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: calcium stearate, crospovidone, ferric oxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer dispersion, sodium carbonate, and triethyl citrate. The tablets are imprinted with brown ink containing ammonium hydroxide, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, N-butyl alcohol, propylene glycol, and shellac glaze in ethanol. Pantoprazole sodium delayed-release tablets (40 mg and 20 mg) complies USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>50228-559-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (50228-559-10) </PackageDescription>
<NDC11Code>50228-0559-10</NDC11Code>
<ProductNDC>50228-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brivaracetam</ProprietaryName>
<NonProprietaryName>Brivaracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219952</ApplicationNumber>
<LabelerName>ScieGen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BRIVARACETAM</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Epoxide Hydrolase Inhibitors [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brivaracetam is indicated for the treatment of partial-onset seizures in patients 1 month of age and older.</IndicationAndUsage>
<Description>The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyltetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is:. Brivaracetam is a white to off-white crystalline powder. It is very soluble in water, ethanol, and methanol. It is freely soluble in acetonitrile and acetone and soluble in toluene. It is very slightly soluble in n-hexane. Tablets. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and film coating agent contains polyethylene glycol 3350, polyethylene glycol 8000, polyvinyl alcohol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>52584-559-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 BAG (52584-559-10) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>52584-0559-10</NDC11Code>
<ProductNDC>52584-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Marcaine</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20100801</StartMarketingDate>
<EndMarketingDate>20230701</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016964</ApplicationNumber>
<LabelerName>General Injectables & Vaccines, Inc</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20100801</StartMarketingDatePackage>
<EndMarketingDatePackage>20230701</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55289-559-10</NDCCode>
<PackageDescription>10 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE, PLASTIC (55289-559-10) </PackageDescription>
<NDC11Code>55289-0559-10</NDC11Code>
<ProductNDC>55289-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077557</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ONDANSETRON</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA],Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-08-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58411-559-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (58411-559-10) / 35 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>58411-0559-10</NDC11Code>
<ProductNDC>58411-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cle De Peau Beaute Radiant Fluid Foundation</ProprietaryName>
<ProprietaryNameSuffix>Bf60</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200701</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>2.72118</StrengthNumber>
<StrengthUnit>g/35mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>60846-559-10</NDCCode>
<PackageDescription>10 CARTON in 1 BAG (60846-559-10) / 1 BLISTER PACK in 1 CARTON (60846-559-27) / 7 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>60846-0559-10</NDC11Code>
<ProductNDC>60846-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pyridostigmine Bromide</ProprietaryName>
<NonProprietaryName>Pyridostigmine Bromide</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241009</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217604</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>PYRIDOSTIGMINE BROMIDE</SubstanceName>
<StrengthNumber>105</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pyridostigmine bromide is indicated for pretreatment against the lethal effects of soman nerve agent poisoning in adults. Pyridostigmine bromide is intended for use in conjunction with protective garments, including a mask. At the first sign of nerve agent poisoning, pyridostigmine bromide should be stopped, and atropine and pralidoxime therapy started immediately. The evidence for the effectiveness of pyridostigmine bromide as pretreatment against soman-induced toxicity was derived from animal studies alone [see Clinical Studies (14)]. FOR MILITARY MEDICAL USE ONLY.</IndicationAndUsage>
<Description>Pyridostigmine bromide is an orally active, reversible cholinesterase inhibitor. Pyridostigmine bromide is a white or almost white, crystalline, deliquescent powder, very soluble in water and alcohol, and practically insoluble in ether. CAS registration number is 101-26-8. Pyridostigmine bromide has a molecular formula of C9H13BrN2O2, with a molecular weight of 261.12. Its chemical name is 3-hydroxy-1-methylpyridinium bromide dimethylcarbamate, and its structural formula is. Pyridostigmine bromide extended-release tablets contain 105 mg of pyridostigmine bromide (equivalent to 72.87 mg of pyridostigmine base) for oral administration. The inactive ingredients included in the tablet formula are ammonia methacrylate copolymer, ammonium hydroxide, black iron oxide, calcium carbonate, colloidal silicon dioxide, crospovidone, hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, magnesium stearate, mannitol, propylene glycol, shellac glaze, sodium bicarbonate, succinic acid, talc, titanium dioxide, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>60923-559-68</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (60923-559-68) * 10 mL in 1 VIAL, SINGLE-USE (60923-562-01) * 68 POUCH in 1 BOX / 1 SWAB in 1 POUCH</PackageDescription>
<NDC11Code>60923-0559-68</NDC11Code>
<ProductNDC>60923-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Elevidys</ProprietaryName>
<NonProprietaryName>Delandistrogene Moxeparvovec-rokl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230622</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125781</ApplicationNumber>
<LabelerName>Sarepta Therapeutics, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ELEVIDYS is indicated for the treatment of patients 4 years of age and older with Duchenne muscular dystrophy (DMD), who are ambulatory and have a confirmed mutation in the DMD gene [see Clinical Pharmacology (12.2), Clinical Studies (14)].</IndicationAndUsage>
<Description>ELEVIDYS (delandistrogene moxeparvovec-rokl) is a recombinant gene therapy designed to deliver the gene encoding the ELEVIDYS micro-dystrophin protein. ELEVIDYS is a non-replicating, recombinant, adeno-associated virus serotype rh74 (AAVrh74) based vector containing the ELEVIDYS micro-dystrophin transgene under the control of the MHCK7 promoter. The genome within the ELEVIDYS AAVrh74 vector contains no viral genes and consequently is incapable of replication or reversion to a replicating form. The micro-dystrophin protein expressed by ELEVIDYS is a shortened version (138 kDa, compared to 427 kDa size of dystrophin expressed in normal muscle cells) that contains selected domains of dystrophin expressed in normal muscle cells. ELEVIDYS is a preservative-free, sterile, clear, colorless liquid that may have some opalescence and may contain white to off-white particles. ELEVIDYS is a suspension for intravenous infusion with a nominal concentration of 1.33 ×1013 vg/mL and supplied in a single-dose 10 mL vial. Each vial contains an extractable volume of 10 mL and the following excipients: 200mM sodium chloride, 13 mM tromethamine HCl, 7 mM tromethamine, 1mM magnesium chloride, 0.001% poloxamer 188, with a pH of 8.0 ± 0.3.</Description>
</NDC>
<NDC>
<NDCCode>62037-559-10</NDCCode>
<PackageDescription>1000 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (62037-559-10) </PackageDescription>
<NDC11Code>62037-0559-10</NDC11Code>
<ProductNDC>62037-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080825</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077419</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080825</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>62157-559-01</NDCCode>
<PackageDescription>10 g in 1 JAR (62157-559-01)</PackageDescription>
<NDC11Code>62157-0559-01</NDC11Code>
<ProductNDC>62157-559</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Bromfenac Sodium</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20180418</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING</MarketingCategoryName>
<LabelerName>AX Pharmaceutical Corp</LabelerName>
<SubstanceName>BROMFENAC SODIUM</SubstanceName>
<StrengthNumber>9.9</StrengthNumber>
<StrengthUnit>g/10g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>62584-559-01</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (62584-559-01) > 10 TABLET in 1 BLISTER PACK (62584-559-11)</PackageDescription>
<NDC11Code>62584-0559-01</NDC11Code>
<ProductNDC>62584-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076003</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-09-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>63323-559-65</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (63323-559-65) / 1 SYRINGE in 1 BLISTER PACK (63323-559-63) / .3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>63323-0559-65</NDC11Code>
<ProductNDC>63323-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190423</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078990</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190423</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .</IndicationAndUsage>
<Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>63323-559-93</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (63323-559-93) / 1 SYRINGE in 1 BLISTER PACK (63323-559-21) / .3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>63323-0559-93</NDC11Code>
<ProductNDC>63323-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190423</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078990</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190423</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .</IndicationAndUsage>
<Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>63739-559-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-559-10) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63739-0559-10</NDC11Code>
<ProductNDC>63739-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofloxacin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070426</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077859</ApplicationNumber>
<LabelerName>McKesson Corporation dba SKY Packaging</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC], Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ciprofloxacin tablet is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: 1 Skin and Skin Structure Infections ( 1.1) , 2 Bone and Joint Infections ( 1.2) , 3 Complicated Intra-Abdominal Infections ( 1.3) , 4 Infectious Diarrhea ( 1.4) , 5 Typhoid Fever (Enteric Fever) ( 1.5) , 6 Uncomplicated Cervical and Urethral Gonorrhea ( 1.6) , 7 Inhalational Anthrax post-exposure in adult and pediatric patients ( 1.7) , 8 Plague in adult and pediatric patients ( 1.8) , 9 Chronic Bacterial Prostatitis ( 1.9) , 10 Lower Respiratory Tract Infections ( 1.10) Acute Exacerbation of Chronic Bronchitis, 11 Urinary Tract Infections ( 1.11) Urinary Tract Infections (UTI)Acute Uncomplicated CystitisComplicated UTI and Pyelonephritis in Pediatric Patients, 12 Acute Sinusitis ( 1.12) .</IndicationAndUsage>
<Description>Ciprofloxacin tablets, USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its molecular formula is C 17H 18FN 3O 3HClH 2O and its chemical structure is as follows:. Ciprofloxacin is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its molecular formula is C 17H 18FN 3O 3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows:. Ciprofloxacin film coated tablets are available in 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin tablets, USP are white to off-white. The inactive ingredients are colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63824-559-99</NDCCode>
<PackageDescription>60 CARTON in 1 CARTON (63824-559-99) > 8 BLISTER PACK in 1 CARTON > 10 TABLET, COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63824-0559-99</NDC11Code>
<ProductNDC>63824-559</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Acetaminophen, Diphenhydramine Hydrochloride, And Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<StartMarketingDate>20141115</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Reckitt Benckiser LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN; DIPHENHYDRAMINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 12.5; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>68016-559-00</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (68016-559-00) / 10 GUM, CHEWING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68016-0559-00</NDC11Code>
<ProductNDC>68016-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine Polacrilex</ProprietaryName>
<ProprietaryNameSuffix>Coated Mint</ProprietaryNameSuffix>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>GUM, CHEWING</DosageFormName>
<RouteName>BUCCAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<EndMarketingDate>20261231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078699</ApplicationNumber>
<LabelerName>Chain Drug Consortium, LLC</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20141001</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68382-559-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (68382-559-10) </PackageDescription>
<NDC11Code>68382-0559-10</NDC11Code>
<ProductNDC>68382-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrofurantoin Macrocrystals</ProprietaryName>
<NonProprietaryName>Nitrofurantoin Macrocrystals</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205005</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>NITROFURANTOIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrofuran Antibacterial [EPC], Nitrofurans [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitrofurantoin macrocrystals capsules are specifically indicated for the treatment of urinary tract infections when due to susceptible strains of Escherichia coli, enterococci, Staphylococcus aureus, and certain susceptible strains of Klebsiella and Enterobacter species. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of nitrofurantoin macrocrystals capsules and other antibacterial drugs, nitrofurantoin macrocrystals capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with nitrofurantoin macrocrystals capsules are predisposed to persistence or reappearance of bacteriuria. Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with nitrofurantoin macrocrystals capsules, other therapeutic agents with broader tissue distribution should be selected. In considering the use of nitrofurantoin macrocrystals capsules, lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.</IndicationAndUsage>
<Description>Nitrofurantoin capsules, USP (macrocrystals) is a synthetic chemical of controlled crystal size. It is a stable, lemon-yellow, crystalline compound. Nitrofurantoin capsules, USP (macrocrystals) is an antibacterial agent for specific urinary tract infections. It is available in 50 mg and 100 mg capsules for oral administration. 1-[[(5-nitro-2-furanyl)methylene] amino]-2,4-imidazolidinedione. Nitrofurantoin macrocrystals is a lemon-yellow crystalline compound. It is soluble in dimethylformamide, very slightly soluble in water and in alcohol. Each nitrofurantoin capsules, USP (macrocrystals) intended for oral administration contains 50 mg and 100 mg of nitrofurantoin macrocrystals. In addition, each capsule contains the following inactive ingredients: gelatin, lactose monohydrate, magnesium stearate, pregelatinized starch, talc and titanium dioxide. Additionally each 50 mg and 100 mg capsule shell contains FD & C Blue # 1, FD & C Red # 3 and sodium lauryl sulphate. The capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68382-559-30</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68382-559-30) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68382-0559-30</NDC11Code>
<ProductNDC>68382-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrofurantoin Macrocrystals</ProprietaryName>
<NonProprietaryName>Nitrofurantoin Macrocrystals</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205005</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>NITROFURANTOIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrofuran Antibacterial [EPC], Nitrofurans [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitrofurantoin macrocrystals capsules are specifically indicated for the treatment of urinary tract infections when due to susceptible strains of Escherichia coli, enterococci, Staphylococcus aureus, and certain susceptible strains of Klebsiella and Enterobacter species. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of nitrofurantoin macrocrystals capsules and other antibacterial drugs, nitrofurantoin macrocrystals capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with nitrofurantoin macrocrystals capsules are predisposed to persistence or reappearance of bacteriuria. Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with nitrofurantoin macrocrystals capsules, other therapeutic agents with broader tissue distribution should be selected. In considering the use of nitrofurantoin macrocrystals capsules, lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.</IndicationAndUsage>
<Description>Nitrofurantoin capsules, USP (macrocrystals) is a synthetic chemical of controlled crystal size. It is a stable, lemon-yellow, crystalline compound. Nitrofurantoin capsules, USP (macrocrystals) is an antibacterial agent for specific urinary tract infections. It is available in 50 mg and 100 mg capsules for oral administration. 1-[[(5-nitro-2-furanyl)methylene] amino]-2,4-imidazolidinedione. Nitrofurantoin macrocrystals is a lemon-yellow crystalline compound. It is soluble in dimethylformamide, very slightly soluble in water and in alcohol. Each nitrofurantoin capsules, USP (macrocrystals) intended for oral administration contains 50 mg and 100 mg of nitrofurantoin macrocrystals. In addition, each capsule contains the following inactive ingredients: gelatin, lactose monohydrate, magnesium stearate, pregelatinized starch, talc and titanium dioxide. Additionally each 50 mg and 100 mg capsule shell contains FD & C Blue # 1, FD & C Red # 3 and sodium lauryl sulphate. The capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>71919-559-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-559-10) </PackageDescription>
<NDC11Code>71919-0559-10</NDC11Code>
<ProductNDC>71919-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Prunus Virginiana</ProprietaryName>
<NonProprietaryName>Prunus Serotina Bark</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101019</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>PRUNUS SEROTINA BARK</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72603-559-01</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (72603-559-01) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>72603-0559-01</NDC11Code>
<ProductNDC>72603-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</ProprietaryName>
<NonProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20250601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207629</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>20; 5</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dorzolamide hydrochloride and timolol maleate ophthalmic solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride USP is described chemically as: (4S-trans)-4-(ethylamino)-5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride is optically active. The specific rotation is: [α] 25°C (C=1, water) = ~ -17°. 405 nm Its molecular formula is C10H16N2O4S3HCl and its structural formula is. Dorzolamide hydrochloride USP has a molecular weight of 360.91. It is a white to off-white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate USP is described chemically as: (-)-1-(tert-butylamino)-3- [(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is: [α] 25°C in 1N HCl (C=5) = -12.2° (-11.7° to -12.5°). 405 nm Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate USP has a molecular weight of 432.50. It is a white to practically white powder which is soluble in water, methanol, and alcohol. Timolol maleate is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is supplied as a sterile, clear, colorless to nearly colorless, isotonic, buffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 to 323 mOsM. Each mL of Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP contains 20 mg dorzolamide (equivalent to 22.26 mg of dorzolamide hydrochloride USP) and 5 mg timolol (equivalent to 6.83 mg timolol maleate USP). Inactive ingredients are sodium citrate, hydroxyethyl cellulose, sodium hydroxide, mannitol, and water for injection. Benzalkonium chloride 0.0075% is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>72606-559-02</NDCCode>
<PackageDescription>8 CARTON in 1 CARTON (72606-559-02) > 1 VIAL, SINGLE-DOSE in 1 CARTON (72606-559-01) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>72606-0559-02</NDC11Code>
<ProductNDC>72606-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Busulfan</ProprietaryName>
<NonProprietaryName>Busulfan</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210931</ApplicationNumber>
<LabelerName>CELLTRION USA, INC.</LabelerName>
<SubstanceName>BUSULFAN</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Busulfan injection is indicated for use in combination with cyclophosphamide as a conditioning regimen prior to allogeneic hematopoietic progenitor cell transplantation for chronic myelogenous leukemia.</IndicationAndUsage>
<Description>Busulfan is a bifunctional alkylating agent known chemically as 1,4-butanediol, dimethanesulfonate. Busulfan Injection is intended for intravenous administration. It is supplied as a clear, colorless, sterile, solution in 10 mL single-dose vials. Each vial of busulfan injection contains 60 mg (6 mg/mL) of busulfan, the active ingredient, a white crystalline powder with a molecular formula of CH3SO2O(CH2)4OSO2CH3 and a molecular weight of 246 g/mole. Busulfan has the following chemical structure. Busulfan is dissolved in N,N-dimethylacetamide (DMA), 3.3 mL and Polyethylene Glycol 400, NF 6.7 mL. The solubility of busulfan in water is 0.1 g per L and the pH of busulfan diluted to approximately 0.5 mg per mL busulfan in 0.9% Sodium Chloride Injection, USP or 5% Dextrose Injection, USP as recommended for infusion reflects the pH of the diluent used and ranges from 3.4 to 3.9.</Description>
</NDC>
<NDC>
<NDCCode>83703-559-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BOX (83703-559-01) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>83703-0559-01</NDC11Code>
<ProductNDC>83703-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesnex</ProprietaryName>
<NonProprietaryName>Mesna</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19881230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019884</ApplicationNumber>
<LabelerName>Bamboo US Bidco LCC</LabelerName>
<SubstanceName>MESNA</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cytoprotective Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19881230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MESNEX is indicated as a prophylactic agent in reducing the incidence of ifosfamide-induced hemorrhagic cystitis. Limitation of Use: MESNEX is not indicated to reduce the risk of hematuria due to other pathological conditions such as thrombocytopenia.</IndicationAndUsage>
<Description>MESNEX (mesna) is a detoxifying agent to inhibit the hemorrhagic cystitis induced by ifosfamide. The active ingredient, mesna, is a synthetic sulfhydryl compound designated as sodium-2-mercaptoethane sulfonate with a molecular formula of C 2H 5NaO 3S 2and a molecular weight of 164.18. Its structural formula is as follows:. HS–CH 2–CH 2SO 3–Na +. MESNEX injection is a sterile, nonpyrogenic, aqueous solution of clear and colorless appearance in clear glass multidose vials for intravenous administration. MESNEX injection contains 100 mg/mL mesna, 0.25 mg/mL edetate disodium and sodium hydroxide for pH adjustment. MESNEX injection multidose vials also contain 10.4 mg/mL of benzyl alcohol as a preservative. The solution has a pH range of 7.5-8.5. MESNEX tablets are white, oblong, scored biconvex film-coated tablets with the imprint M4. They contain 400 mg mesna. The excipients are calcium phosphate, cornstarch, hydroxypropylmethylcellulose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, simethicone, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>83703-559-03</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 BOX (83703-559-03) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>83703-0559-03</NDC11Code>
<ProductNDC>83703-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesnex</ProprietaryName>
<NonProprietaryName>Mesna</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19881230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019884</ApplicationNumber>
<LabelerName>Bamboo US Bidco LCC</LabelerName>
<SubstanceName>MESNA</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cytoprotective Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19881230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MESNEX is indicated as a prophylactic agent in reducing the incidence of ifosfamide-induced hemorrhagic cystitis. Limitation of Use: MESNEX is not indicated to reduce the risk of hematuria due to other pathological conditions such as thrombocytopenia.</IndicationAndUsage>
<Description>MESNEX (mesna) is a detoxifying agent to inhibit the hemorrhagic cystitis induced by ifosfamide. The active ingredient, mesna, is a synthetic sulfhydryl compound designated as sodium-2-mercaptoethane sulfonate with a molecular formula of C 2H 5NaO 3S 2and a molecular weight of 164.18. Its structural formula is as follows:. HS–CH 2–CH 2SO 3–Na +. MESNEX injection is a sterile, nonpyrogenic, aqueous solution of clear and colorless appearance in clear glass multidose vials for intravenous administration. MESNEX injection contains 100 mg/mL mesna, 0.25 mg/mL edetate disodium and sodium hydroxide for pH adjustment. MESNEX injection multidose vials also contain 10.4 mg/mL of benzyl alcohol as a preservative. The solution has a pH range of 7.5-8.5. MESNEX tablets are white, oblong, scored biconvex film-coated tablets with the imprint M4. They contain 400 mg mesna. The excipients are calcium phosphate, cornstarch, hydroxypropylmethylcellulose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, simethicone, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16714-559-01</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (16714-559-01) </PackageDescription>
<NDC11Code>16714-0559-01</NDC11Code>
<ProductNDC>16714-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220812</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077987</ApplicationNumber>
<LabelerName>NorthStar RxLLC</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient is chemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:, 6 o Primary dysbetalipoproteinemia., 7 o Hypertriglyceridemia.</IndicationAndUsage>
<Description>Pravastatin sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>16714-559-02</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (16714-559-02) </PackageDescription>
<NDC11Code>16714-0559-02</NDC11Code>
<ProductNDC>16714-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220812</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077987</ApplicationNumber>
<LabelerName>NorthStar RxLLC</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient is chemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:, 6 o Primary dysbetalipoproteinemia., 7 o Hypertriglyceridemia.</IndicationAndUsage>
<Description>Pravastatin sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>21130-559-58</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (21130-559-58) / 14 g in 1 TUBE</PackageDescription>
<NDC11Code>21130-0559-58</NDC11Code>
<ProductNDC>21130-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Signature Care First Aid Antibiotic</ProprietaryName>
<NonProprietaryName>Neomycin, Polymyxin B, Pramoxine Hcl</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151110</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M004</ApplicationNumber>
<LabelerName>Safeway</LabelerName>
<SubstanceName>NEOMYCIN SULFATE; PRAMOXINE HYDROCHLORIDE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>3.5; 10; 10000</StrengthNumber>
<StrengthUnit>mg/g; mg/g; [USP'U]/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent infection and for temporary relief of pain or discomfort in minor: 1 cuts , 2 scrapes , 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-559-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (43598-559-05) </PackageDescription>
<NDC11Code>43598-0559-05</NDC11Code>
<ProductNDC>43598-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160929</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206383</ApplicationNumber>
<LabelerName>Dr.Reddy�s Laboratories Inc</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole tablets are indicated for the treatment of: : 1 Schizophrenia [see CLINICAL STUDIES (14.1)].</IndicationAndUsage>
<Description>Aripiprazole is a psychotropic drug that is available as tablets. Aripiprazole USP is 7-[4-[4-(2,3-dichlorophenyl)-1piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.39. The chemical structure is:. Aripiprazole Tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, colloidal silicon dioxide, isopropyl alcohol, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone. Colorants include ferric oxide (yellow or red) and FD&C Blue No. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43598-559-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (43598-559-30) </PackageDescription>
<NDC11Code>43598-0559-30</NDC11Code>
<ProductNDC>43598-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160929</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206383</ApplicationNumber>
<LabelerName>Dr.Reddy�s Laboratories Inc</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole tablets are indicated for the treatment of: : 1 Schizophrenia [see CLINICAL STUDIES (14.1)].</IndicationAndUsage>
<Description>Aripiprazole is a psychotropic drug that is available as tablets. Aripiprazole USP is 7-[4-[4-(2,3-dichlorophenyl)-1piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.39. The chemical structure is:. Aripiprazole Tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, colloidal silicon dioxide, isopropyl alcohol, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone. Colorants include ferric oxide (yellow or red) and FD&C Blue No. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
</NDCList>