{
"NDC": [
{
"NDCCode": "66288-8100-1",
"PackageDescription": "1 BAG in 1 BAG (66288-8100-1) / 1 INJECTION, POWDER, FOR SOLUTION in 1 BAG",
"NDC11Code": "66288-8100-01",
"ProductNDC": "66288-8100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime",
"NonProprietaryName": "Cefepime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209408",
"LabelerName": "SAMSON MEDICAL TECHNOLOGIES LLC",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2024-03-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Cefepime for Injection, USP is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: 1 Pneumonia. (1.1), 2 Empiric therapy for febrile neutropenic patients. (1.2), 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3), 4 Uncomplicated skin and skin structure infections. (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5).",
"Description": "Cefepime for Injection, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than a 500 mg dose of cefepime. Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride, 72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES CONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 50 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied in a SmartPak® pharmacy bulk package containing the equivalent of 100 grams of cefepime. Cefepime for Injection is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection will range in color from pale yellow to amber. Each SmartPak® Pharmacy Bulk Package contains sterile Cefepime Hydrochloride, USP, equivalent to 100 grams of cefepime and is intended for intravenous infusion only. Its L-arginine content is approximately 70.7 grams. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. CONSTITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION."
},
{
"NDCCode": "66288-1100-1",
"PackageDescription": "1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 BAG (66288-1100-1) ",
"NDC11Code": "66288-1100-01",
"ProductNDC": "66288-1100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefazolin",
"NonProprietaryName": "Cefazolin Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20070101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065141",
"LabelerName": "Samson Medical Technologies, L.L.C.",
"SubstanceName": "CEFAZOLIN SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070101",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefazolin and other antibacterial drugs, cefazolin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefazolin for Injection is indicated for the treatment of the following infections when caused by susceptible bacteria.",
"Description": "Cefazolin for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than a 250 mg dose of cefazolin. Cefazolin for Injection, USP, is a sterile, lyophilized, semisynthetic cephalosporin for intravenous administration. It is the sodium salt of 3-{[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7- [2-(1H -tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. Each Pharmacy Bulk Package contains 48 mg (2.1 mEq) of sodium per 1 gram of cefazolin sodium. Cefazolin for Injection, USP, is supplied in 100 grams and 300 grams SmartPak® Pharmacy Bulk Packages bags equivalent. Each SmartPak® Pharmacy Bulk Package bag contains cefazolin sodium equivalent to 100 grams or 300 grams of cefazolin. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 mg per mL AND FURTHER DILUTION IN 50 mL OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. A Pharmacy Bulk Package is a container of a sterile preparation for intravenous use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. The molecular formula is C14H13N8NaO4S3. The molecular weight is 476.49. The structural formula is as follows. The pH of the reconstituted solution is between 4 and 6."
},
{
"NDCCode": "66288-1300-1",
"PackageDescription": "1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 BAG (66288-1300-1) ",
"NDC11Code": "66288-1300-01",
"ProductNDC": "66288-1300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefazolin",
"NonProprietaryName": "Cefazolin Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20070101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065141",
"LabelerName": "Samson Medical Technologies, L.L.C.",
"SubstanceName": "CEFAZOLIN SODIUM",
"StrengthNumber": "300",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070101",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefazolin and other antibacterial drugs, cefazolin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefazolin for Injection is indicated for the treatment of the following infections when caused by susceptible bacteria.",
"Description": "Cefazolin for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than a 250 mg dose of cefazolin. Cefazolin for Injection, USP, is a sterile, lyophilized, semisynthetic cephalosporin for intravenous administration. It is the sodium salt of 3-{[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7- [2-(1H -tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. Each Pharmacy Bulk Package contains 48 mg (2.1 mEq) of sodium per 1 gram of cefazolin sodium. Cefazolin for Injection, USP, is supplied in 100 grams and 300 grams SmartPak® Pharmacy Bulk Packages bags equivalent. Each SmartPak® Pharmacy Bulk Package bag contains cefazolin sodium equivalent to 100 grams or 300 grams of cefazolin. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 mg per mL AND FURTHER DILUTION IN 50 mL OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. A Pharmacy Bulk Package is a container of a sterile preparation for intravenous use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. The molecular formula is C14H13N8NaO4S3. The molecular weight is 476.49. The structural formula is as follows. The pH of the reconstituted solution is between 4 and 6."
},
{
"NDCCode": "66288-2075-1",
"PackageDescription": "1 INJECTION, POWDER, FOR SOLUTION in 1 BAG (66288-2075-1)",
"NDC11Code": "66288-2075-01",
"ProductNDC": "66288-2075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime Sodium",
"NonProprietaryName": "Cefuroxime Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065251",
"LabelerName": "Samson Medical Technologies, L.L.C.",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "75",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-04-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "66288-2225-1",
"PackageDescription": "1 INJECTION, POWDER, FOR SOLUTION in 1 BAG (66288-2225-1)",
"NDC11Code": "66288-2225-01",
"ProductNDC": "66288-2225",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime Sodium",
"NonProprietaryName": "Cefuroxime Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065251",
"LabelerName": "Samson Medical Technologies, L.L.C.",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "225",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-04-13",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "66288-4100-1",
"PackageDescription": "1 BAG in 1 BAG (66288-4100-1) > 1 INJECTION, POWDER, FOR SOLUTION in 1 BAG",
"NDC11Code": "66288-4100-01",
"ProductNDC": "66288-4100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefoxitin",
"NonProprietaryName": "Cefoxitin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200938",
"LabelerName": "SAMSON MEDICAL TECHNOLOGIES LLC",
"SubstanceName": "CEFOXITIN SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2020-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160301",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefoxitin and other antibacterial drugs, Cefoxitin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cefoxitin for Injection, USP, Pharmacy Bulk Package bag SmartPak® should be used only in patients who require a 1 gram dose and not any fraction thereof. Cefoxitin for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than the 1 gram dose of cefoxitin. Cefoxitin for Injection, USP is a semi-synthetic, broad-spectrum cepha antibiotic for intravenous administration. It is derived from cephamycin C, which is produced by Streptomyces lactamdurans. Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C16H16N3NaO7S2, and the structural formula is. Cefoxitin for Injection contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 50 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE. Each SmartPak® Pharmacy Bulk Package contains sterile Cefoxitin Sodium, USP equivalent to 100 grams of cefoxitin and is intended for intravenous infusion only. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSITITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. CEFOXITIN FOR INJECTION, USP SMARTPAK® PHARMACY BULK PACKAGE SHOULD NOT BE USED IN PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE OF CEFOXTIN."
},
{
"NDCCode": "66288-6100-1",
"PackageDescription": "1 INJECTION, POWDER, FOR SOLUTION in 1 BAG (66288-6100-1) ",
"NDC11Code": "66288-6100-01",
"ProductNDC": "66288-6100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftriaxone",
"NonProprietaryName": "Ceftriaxone Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20140630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090057",
"LabelerName": "Samson Medical Technologies, LLC",
"SubstanceName": "CEFTRIAXONE SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2023-01-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140630",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection and other antibacterial drugs, Ceftriaxone for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection is indicated for the treatment of the following infections when caused by susceptible bacteria.",
"Description": "Ceftriaxone for Injection, USP, Pharmacy Bulk Package bag SmartPak® should be used only in patients who require a 1 gram dose and not any fraction thereof. Ceftriaxone for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than the 1 gram dose of ceftriaxone. Ceftriaxone for Injection, USP, is a sterile, semisynthetic, broad-spectrum cephalosporin antibacterial for intravenous administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.60 and the following structural formula. Ceftriaxone sodium is a white to yellowish-orange crystalline powder, which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage and concentration. Each Pharmacy Bulk Package contains approximately 83 mg (3.6 mEq) of sodium per 1 gram of ceftriaxone activity. Ceftriaxone for Injection, USP is supplied in 100 grams SmartPak® Pharmacy Bulk Packages bags equivalent. Each SmartPak® Pharmacy Bulk Package bag contains ceftriaxone sodium, USP equivalent to 100 grams of ceftriaxone. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 mg per mL AND FURTHER DILUTION IN 50 mL OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY OVER 30 MINUTES. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC PATIENTS AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion."
},
{
"NDCCode": "66288-7100-1",
"PackageDescription": "1 BAG in 1 BAG (66288-7100-1) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 BAG",
"NDC11Code": "66288-7100-01",
"ProductNDC": "66288-7100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091532",
"LabelerName": "SAMSON MEDICAL TECHNOLOGIES LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2020-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160601",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (beta-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, and skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by Streptococcus viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, vancomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infection.",
"Description": "Vancomycin Hydrochloride for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than a 500 mg dose of vancomycin. Vancomycin Hydrochloride for Injection, USP is a white to almost white to brownish lyophilized powder for preparing intravenous (I.V.) infusions, in bags containing the equivalent of 100 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 100 mg/mL, a clear, brownish-yellow solution is formed with the pH of the solution between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Each SmartPak® Pharmacy Bulk Package contains Vancomycin Hydrochloride for Injection, USP equivalent to 100 grams of vancomycin activity and is intended for intravenous infusion only following further dilution. A Pharmacy Bulk Package is a sterile dosage form containing many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. VANCOMYCIN HYDROCHLORIDE FOR INJECTION PHARMACY BULK PACKAGE BAG SMARTPAK® SHOULD NOT BE USED IN PATIENTS WHO REQUIRE LESS THAN A 500 MG DOSE OF VANCOMYCIN. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 100 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 500 MG DOSE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin Hydrochloride has the following structural formula."
},
{
"NDCCode": "0067-8100-12",
"PackageDescription": "1 TUBE in 1 CARTON (0067-8100-12) > 12 g in 1 TUBE",
"NDC11Code": "00067-8100-12",
"ProductNDC": "0067-8100",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lamisil At",
"NonProprietaryName": "Terbinafine Hydrochloride",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20070702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077511",
"LabelerName": "GlaxoSmithKline Consumer Healthcare Holdings (US) LLC",
"SubstanceName": "TERBINAFINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Allylamine Antifungal [EPC], Allylamine [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20070702",
"SamplePackage": "N",
"IndicationAndUsage": "cures most athlete's foot (tinea pedis). cures most jock itch (tinea cruris) and ringworm (tinea corporis). relieves itching, burning, cracking and scaling which accompany these conditions."
},
{
"NDCCode": "0067-8100-15",
"PackageDescription": "1 TUBE in 1 CARTON (0067-8100-15) > 15 g in 1 TUBE",
"NDC11Code": "00067-8100-15",
"ProductNDC": "0067-8100",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lamisil At",
"NonProprietaryName": "Terbinafine Hydrochloride",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20070702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077511",
"LabelerName": "GlaxoSmithKline Consumer Healthcare Holdings (US) LLC",
"SubstanceName": "TERBINAFINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Allylamine Antifungal [EPC], Allylamine [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170424",
"SamplePackage": "N",
"IndicationAndUsage": "cures most athlete's foot (tinea pedis). cures most jock itch (tinea cruris) and ringworm (tinea corporis). relieves itching, burning, cracking and scaling which accompany these conditions."
},
{
"NDCCode": "0067-8100-30",
"PackageDescription": "1 TUBE in 1 CARTON (0067-8100-30) > 30 g in 1 TUBE",
"NDC11Code": "00067-8100-30",
"ProductNDC": "0067-8100",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lamisil At",
"NonProprietaryName": "Terbinafine Hydrochloride",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20070702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077511",
"LabelerName": "GlaxoSmithKline Consumer Healthcare Holdings (US) LLC",
"SubstanceName": "TERBINAFINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Allylamine Antifungal [EPC], Allylamine [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20070702",
"SamplePackage": "N",
"IndicationAndUsage": "cures most athlete's foot (tinea pedis). cures most jock itch (tinea cruris) and ringworm (tinea corporis). relieves itching, burning, cracking and scaling which accompany these conditions."
},
{
"NDCCode": "0113-8100-00",
"PackageDescription": "310 BLISTER PACK in 1 CARTON (0113-8100-00) / 1 GUM, CHEWING in 1 BLISTER PACK",
"NDC11Code": "00113-8100-00",
"ProductNDC": "0113-8100",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Good Sense Nicotine",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "GUM, CHEWING",
"RouteName": "ORAL",
"StartMarketingDate": "20230621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206394",
"LabelerName": "L. Perrigo Company",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260226",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "0113-8100-25",
"PackageDescription": "110 BLISTER PACK in 1 CARTON (0113-8100-25) / 1 GUM, CHEWING in 1 BLISTER PACK",
"NDC11Code": "00113-8100-25",
"ProductNDC": "0113-8100",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Good Sense Nicotine",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "GUM, CHEWING",
"RouteName": "ORAL",
"StartMarketingDate": "20230621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206394",
"LabelerName": "L. Perrigo Company",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230621",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "0113-8100-29",
"PackageDescription": "220 BLISTER PACK in 1 CARTON (0113-8100-29) / 1 GUM, CHEWING in 1 BLISTER PACK",
"NDC11Code": "00113-8100-29",
"ProductNDC": "0113-8100",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Good Sense Nicotine",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "GUM, CHEWING",
"RouteName": "ORAL",
"StartMarketingDate": "20230621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206394",
"LabelerName": "L. Perrigo Company",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260102",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "0169-8100-01",
"PackageDescription": "1 KIT in 1 KIT (0169-8100-01) * 4 mL in 1 VIAL, GLASS (0169-8101-90) * 4 mL in 1 SYRINGE, GLASS (0169-8008-98) * 4 mL in 1 VIAL, GLASS (0169-8101-11) ",
"NDC11Code": "00169-8100-01",
"ProductNDC": "0169-8100",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Esperoct",
"NonProprietaryName": "Antihemophilic Factor (recombinant), Glycopegylated-exei",
"DosageFormName": "KIT",
"StartMarketingDate": "20190219",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125671",
"LabelerName": "Novo Nordisk",
"Status": "Active",
"LastUpdate": "2024-07-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190219",
"SamplePackage": "N",
"IndicationAndUsage": "ESPEROCT [antihemophilic factor (recombinant), glycopegylated-exei] is a recombinant DNA-derived coagulation Factor VIII concentrate indicated for use in adults and children with hemophilia A for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes.",
"Description": "ESPEROCT is a sterile, preservative-free, non-pyrogenic lyophilized powder for intravenous injection after reconstitution with the provided saline diluent. The active ingredient in ESPEROCT is a recombinant analogue of human coagulation Factor VIII (FVIII) conjugated with a 40-kDa polyethylene glycol (PEG) molecule. ESPEROCT is formulated with the following excipients: sodium chloride, L-histidine, sucrose, polysorbate 80, L-methionine, and calcium chloride. FVIII activity in ESPEROCT is determined using the chromogenic assay described in the European Pharmacopoeia. The activity assignment employs a FVIII reference material that is traceable to the current World Health Organization (WHO) international standard for FVIII concentrate, and evaluated by appropriate methodologies to ensure the accuracy of the results. ESPEROCT is available in single-dose vials that contain nominally 500, 1000, 1500, 2000, 3000, 4000, or 5000 IU of FVIII. Each vial of ESPEROCT is labeled with the actual FVIII activity. After reconstitution with the supplied diluent (0.9% saline), each mL of the solution contains approximately 125, 250, 375, 500, 750, 1000, or 1250 IU of FVIII, respectively. The FVIII protein in ESPEROCT is produced in Chinese Hamster Ovary (CHO) cells using recombinant DNA technology, and contains a truncated B domain, which is O-glycosylated. The polypeptide part of the molecule has a molecular mass of 166 kDa (calculated excluding post-translational modifications) and represents a heterodimer of a heavy chain and a light chain, which are held together by non-covalent interactions. The recombinant FVIII protein is purified using a series of chromatographic steps, one of which is affinity chromatography, with the use of a monoclonal antibody to selectively isolate the rFVIII from the cell culture medium. The 40-kDa PEG molecule is conjugated to the O-glycan moiety of the B domain using an enzymatic reaction to produce a glycopegylated FVIII (FVIII-PEG). The purification process includes two viral clearance steps, namely detergent treatment for inactivation of enveloped viruses, and 20-nm filtration for removal of enveloped and non-enveloped viruses. No additives of human or animal origin are used during the manufacturing process and formulation of ESPEROCT. In the blood circulation, when FVIII-PEG is activated by thrombin, the B-domain portion with the attached PEG moiety is cleaved off, and the resulting activated FVIII (FVIIIa) is similar in structure and function to native FVIIIa."
},
{
"NDCCode": "0169-8100-93",
"PackageDescription": "1 KIT in 1 KIT (0169-8100-93) * 4 mL in 1 VIAL, GLASS (0169-8101-90) * 4 mL in 1 SYRINGE, GLASS (0169-8008-98) * 4 mL in 1 VIAL, GLASS (0169-8101-11) ",
"NDC11Code": "00169-8100-93",
"ProductNDC": "0169-8100",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Esperoct",
"NonProprietaryName": "Antihemophilic Factor (recombinant), Glycopegylated-exei",
"DosageFormName": "KIT",
"StartMarketingDate": "20190219",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125671",
"LabelerName": "Novo Nordisk",
"Status": "Active",
"LastUpdate": "2024-07-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190219",
"SamplePackage": "N",
"IndicationAndUsage": "ESPEROCT [antihemophilic factor (recombinant), glycopegylated-exei] is a recombinant DNA-derived coagulation Factor VIII concentrate indicated for use in adults and children with hemophilia A for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes.",
"Description": "ESPEROCT is a sterile, preservative-free, non-pyrogenic lyophilized powder for intravenous injection after reconstitution with the provided saline diluent. The active ingredient in ESPEROCT is a recombinant analogue of human coagulation Factor VIII (FVIII) conjugated with a 40-kDa polyethylene glycol (PEG) molecule. ESPEROCT is formulated with the following excipients: sodium chloride, L-histidine, sucrose, polysorbate 80, L-methionine, and calcium chloride. FVIII activity in ESPEROCT is determined using the chromogenic assay described in the European Pharmacopoeia. The activity assignment employs a FVIII reference material that is traceable to the current World Health Organization (WHO) international standard for FVIII concentrate, and evaluated by appropriate methodologies to ensure the accuracy of the results. ESPEROCT is available in single-dose vials that contain nominally 500, 1000, 1500, 2000, 3000, 4000, or 5000 IU of FVIII. Each vial of ESPEROCT is labeled with the actual FVIII activity. After reconstitution with the supplied diluent (0.9% saline), each mL of the solution contains approximately 125, 250, 375, 500, 750, 1000, or 1250 IU of FVIII, respectively. The FVIII protein in ESPEROCT is produced in Chinese Hamster Ovary (CHO) cells using recombinant DNA technology, and contains a truncated B domain, which is O-glycosylated. The polypeptide part of the molecule has a molecular mass of 166 kDa (calculated excluding post-translational modifications) and represents a heterodimer of a heavy chain and a light chain, which are held together by non-covalent interactions. The recombinant FVIII protein is purified using a series of chromatographic steps, one of which is affinity chromatography, with the use of a monoclonal antibody to selectively isolate the rFVIII from the cell culture medium. The 40-kDa PEG molecule is conjugated to the O-glycan moiety of the B domain using an enzymatic reaction to produce a glycopegylated FVIII (FVIII-PEG). The purification process includes two viral clearance steps, namely detergent treatment for inactivation of enveloped viruses, and 20-nm filtration for removal of enveloped and non-enveloped viruses. No additives of human or animal origin are used during the manufacturing process and formulation of ESPEROCT. In the blood circulation, when FVIII-PEG is activated by thrombin, the B-domain portion with the attached PEG moiety is cleaved off, and the resulting activated FVIII (FVIIIa) is similar in structure and function to native FVIIIa."
},
{
"NDCCode": "0268-8100-10",
"PackageDescription": "10.5 mL in 1 VIAL (0268-8100-10) ",
"NDC11Code": "00268-8100-10",
"ProductNDC": "0268-8100",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Mucor Plumbeus",
"NonProprietaryName": "Mucor Plumbeus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "MUCOR PLUMBEUS",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19650101",
"SamplePackage": "N",
"IndicationAndUsage": "Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust, molds, animal danders, various other inhalants, and in situations where the offending allergen cannot be avoided. Prior to initiation of therapy, the clinical sensitivity should be established by careful evaluation of the patient’s history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided.",
"Description": "Sterile therapeutic extracts are supplied in either Phenol Saline Diluent or in Diluent containing Glycerin 50% (v/v) for subcutaneous injection. Inactive ingredients may include: Sodium Chloride for isotonicity, Glycerin, and Sodium Bicarbonate as buffering agents. These products are compounded and diluted on a w/v or PNU basis. Pollens are individually extracted from pure pollen extracted in a phenol-preserved sodium bicarbonate solution. Short Ragweed and Mixed (Tall and Short) Ragweed extracts are standardized by Antigen E content and so labeled. The Antigen E content of extracts containing Short Ragweed at a concentration more dilute than a weight/volume ratio of 1:10 are obtained by calculating the Antigen E content based on the assay value of more concentrated extract. Pollen extracts are filtered aseptically and, after final packaging, they are tested for sterility and safety. Molds are individually extracted from pure powdered inactivated mold source material extracted in phenol preserved saline. Mold extracts are filtered aseptically and after final packaging are tested for sterility and safety. Molds are present in all inhabited places at all seasons of the year; they are so ubiquitous that they are prevalent at times when common allergic pollens and other inhalants are not. In the home and surroundings, molds are found in upholstered furniture, mattresses, drapes, cellar and storage room dust, woolens, leather goods, fruits, meats, cheeses, garden soil and on plants. Spores, mycelial fragments and mold residues are thus inhaled, contacted and ingested continuously. Miscellaneous inhalants and epidermals are individually extracted in phenol preserved saline, filtered aseptically and after final packaging are tested for sterility and safety."
},
{
"NDCCode": "0268-8100-50",
"PackageDescription": "53 mL in 1 VIAL (0268-8100-50) ",
"NDC11Code": "00268-8100-50",
"ProductNDC": "0268-8100",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Mucor Plumbeus",
"NonProprietaryName": "Mucor Plumbeus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19650101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103753",
"LabelerName": "ALK-Abello, Inc.",
"SubstanceName": "MUCOR PLUMBEUS",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19650101",
"SamplePackage": "N",
"IndicationAndUsage": "Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust, molds, animal danders, various other inhalants, and in situations where the offending allergen cannot be avoided. Prior to initiation of therapy, the clinical sensitivity should be established by careful evaluation of the patient’s history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided.",
"Description": "Sterile therapeutic extracts are supplied in either Phenol Saline Diluent or in Diluent containing Glycerin 50% (v/v) for subcutaneous injection. Inactive ingredients may include: Sodium Chloride for isotonicity, Glycerin, and Sodium Bicarbonate as buffering agents. These products are compounded and diluted on a w/v or PNU basis. Pollens are individually extracted from pure pollen extracted in a phenol-preserved sodium bicarbonate solution. Short Ragweed and Mixed (Tall and Short) Ragweed extracts are standardized by Antigen E content and so labeled. The Antigen E content of extracts containing Short Ragweed at a concentration more dilute than a weight/volume ratio of 1:10 are obtained by calculating the Antigen E content based on the assay value of more concentrated extract. Pollen extracts are filtered aseptically and, after final packaging, they are tested for sterility and safety. Molds are individually extracted from pure powdered inactivated mold source material extracted in phenol preserved saline. Mold extracts are filtered aseptically and after final packaging are tested for sterility and safety. Molds are present in all inhabited places at all seasons of the year; they are so ubiquitous that they are prevalent at times when common allergic pollens and other inhalants are not. In the home and surroundings, molds are found in upholstered furniture, mattresses, drapes, cellar and storage room dust, woolens, leather goods, fruits, meats, cheeses, garden soil and on plants. Spores, mycelial fragments and mold residues are thus inhaled, contacted and ingested continuously. Miscellaneous inhalants and epidermals are individually extracted in phenol preserved saline, filtered aseptically and after final packaging are tested for sterility and safety."
},
{
"NDCCode": "0363-8100-12",
"PackageDescription": "355 mL in 1 BOTTLE (0363-8100-12) ",
"NDC11Code": "00363-8100-12",
"ProductNDC": "0363-8100",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Walgreens",
"ProprietaryNameSuffix": "Cold Cough And Flu Relief",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hydrobromide",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20250401",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "WALGREENS CO.",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "650; 20",
"StrengthUnit": "mg/30mL; mg/30mL",
"Pharm_Classes": "Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250401",
"SamplePackage": "N",
"IndicationAndUsage": "Uses: 1 temporarily relieves these symptoms due to a cold or flu: minor aches and painsheadachecoughsore throat, 2 temporarily reduces fever."
},
{
"NDCCode": "0615-8100-05",
"PackageDescription": "15 TABLET in 1 BLISTER PACK (0615-8100-05) ",
"NDC11Code": "00615-8100-05",
"ProductNDC": "0615-8100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine",
"NonProprietaryName": "Memantine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150711",
"EndMarketingDate": "20210731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090048",
"LabelerName": "NCS HealthCare of KY, Inc dba Vangard Labs",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "NMDA Receptor Antagonists [MoA],N-methyl-D-aspartate Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-08-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190416",
"EndMarketingDatePackage": "20210731",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.",
"Description": "Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula:. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine HCl USP occurs as a white to off-white colored powder and is slightly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride tablets are available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, povidone and talc. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, polyethylene glycol, titanium dioxide, FD & C Yellow #6 and FD & C blue #2 (5 mg tablets), black iron oxide (10 mg tablets)."
},
{
"NDCCode": "0615-8100-39",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (0615-8100-39) ",
"NDC11Code": "00615-8100-39",
"ProductNDC": "0615-8100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine",
"NonProprietaryName": "Memantine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150711",
"EndMarketingDate": "20210731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090048",
"LabelerName": "NCS HealthCare of KY, Inc dba Vangard Labs",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "NMDA Receptor Antagonists [MoA],N-methyl-D-aspartate Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-08-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190416",
"EndMarketingDatePackage": "20210731",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.",
"Description": "Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula:. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine HCl USP occurs as a white to off-white colored powder and is slightly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride tablets are available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, povidone and talc. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, polyethylene glycol, titanium dioxide, FD & C Yellow #6 and FD & C blue #2 (5 mg tablets), black iron oxide (10 mg tablets)."
},
{
"NDCCode": "10819-8100-0",
"PackageDescription": "208197 mL in 1 DRUM (10819-8100-0) ",
"NDC11Code": "10819-8100-00",
"ProductNDC": "10819-8100",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SOLUTION",
"StartMarketingDate": "20210519",
"EndMarketingDate": "20220826",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Professional Disposables International, Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".13",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "19-MAY-21",
"EndMarketingDatePackage": "26-AUG-22"
},
{
"NDCCode": "17856-8100-1",
"PackageDescription": "200 POUCH in 1 BOX (17856-8100-1) > 1 TABLET, FILM COATED in 1 POUCH",
"NDC11Code": "17856-8100-01",
"ProductNDC": "17856-8100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil Citrate",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204883",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210120",
"SamplePackage": "N",
"IndicationAndUsage": "Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). ( 1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. ( 1, 14).",
"Description": "Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H-pyrazolo [4,3- d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin."
},
{
"NDCCode": "17856-8100-2",
"PackageDescription": "200 POUCH in 1 BOX (17856-8100-2) > 2 TABLET, FILM COATED in 1 POUCH",
"NDC11Code": "17856-8100-02",
"ProductNDC": "17856-8100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil Citrate",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204883",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210120",
"SamplePackage": "N",
"IndicationAndUsage": "Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). ( 1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. ( 1, 14).",
"Description": "Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H-pyrazolo [4,3- d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin."
},
{
"NDCCode": "17856-8100-3",
"PackageDescription": "200 POUCH in 1 BOX (17856-8100-3) > 3 TABLET, FILM COATED in 1 POUCH",
"NDC11Code": "17856-8100-03",
"ProductNDC": "17856-8100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil Citrate",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204883",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210120",
"SamplePackage": "N",
"IndicationAndUsage": "Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). ( 1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. ( 1, 14).",
"Description": "Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H-pyrazolo [4,3- d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin."
},
{
"NDCCode": "17856-8100-4",
"PackageDescription": "200 POUCH in 1 BOX (17856-8100-4) > 4 TABLET, FILM COATED in 1 POUCH",
"NDC11Code": "17856-8100-04",
"ProductNDC": "17856-8100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil Citrate",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204883",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210120",
"SamplePackage": "N",
"IndicationAndUsage": "Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). ( 1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. ( 1, 14).",
"Description": "Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H-pyrazolo [4,3- d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin."
},
{
"NDCCode": "17856-8100-5",
"PackageDescription": "200 POUCH in 1 BOX (17856-8100-5) > 5 TABLET, FILM COATED in 1 POUCH",
"NDC11Code": "17856-8100-05",
"ProductNDC": "17856-8100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil Citrate",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204883",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210120",
"SamplePackage": "N",
"IndicationAndUsage": "Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). ( 1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. ( 1, 14).",
"Description": "Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H-pyrazolo [4,3- d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin."
},
{
"NDCCode": "44224-0102-0",
"PackageDescription": "1 KIT in 1 BAG (44224-0102-0) * .5 g in 1 PACKET (61010-8100-2)",
"NDC11Code": "44224-0102-00",
"ProductNDC": "44224-0102",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Adventure Medical Kits Dental Medic",
"NonProprietaryName": "Benzocaine",
"DosageFormName": "KIT",
"RouteName": "ORAL; TOPICAL",
"StartMarketingDate": "20120919",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Tender Corporation",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"IndicationAndUsage": "Temporarily relieves pain caused by: toothache, dental work, minor irritation or injury of the mouth and gums, canker sores, cheek bites, gum sores, and denture irritation."
},
{
"NDCCode": "48951-8100-2",
"PackageDescription": "1350 PELLET in 1 BOTTLE, GLASS (48951-8100-2)",
"NDC11Code": "48951-8100-02",
"ProductNDC": "48951-8100",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pulsatilla Tormentilla Pms Relief",
"NonProprietaryName": "Mammal Liver Pulsatilla Vulgaris Achillea Millefolium",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091211",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Uriel Pharmacy Inc",
"SubstanceName": "MAMMAL LIVER; PULSATILLA VULGARIS; ACHILLEA MILLEFOLIUM",
"StrengthNumber": "4; 12; 30",
"StrengthUnit": "[hp_X]/1; [hp_X]/1; [hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "50090-8100-0",
"PackageDescription": "30 TABLET in 1 BOTTLE (50090-8100-0) ",
"NDC11Code": "50090-8100-00",
"ProductNDC": "50090-8100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ezetimibe",
"NonProprietaryName": "Ezetimibe",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210673",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "EZETIMIBE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Cholesterol Absorption [PE], Dietary Cholesterol Absorption Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20261006",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>66288-8100-1</NDCCode>
<PackageDescription>1 BAG in 1 BAG (66288-8100-1) / 1 INJECTION, POWDER, FOR SOLUTION in 1 BAG</PackageDescription>
<NDC11Code>66288-8100-01</NDC11Code>
<ProductNDC>66288-8100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime</ProprietaryName>
<NonProprietaryName>Cefepime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209408</ApplicationNumber>
<LabelerName>SAMSON MEDICAL TECHNOLOGIES LLC</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefepime for Injection, USP is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: 1 Pneumonia. (1.1), 2 Empiric therapy for febrile neutropenic patients. (1.2), 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3), 4 Uncomplicated skin and skin structure infections. (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5).</IndicationAndUsage>
<Description>Cefepime for Injection, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than a 500 mg dose of cefepime. Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride, 72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES CONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 50 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied in a SmartPak® pharmacy bulk package containing the equivalent of 100 grams of cefepime. Cefepime for Injection is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection will range in color from pale yellow to amber. Each SmartPak® Pharmacy Bulk Package contains sterile Cefepime Hydrochloride, USP, equivalent to 100 grams of cefepime and is intended for intravenous infusion only. Its L-arginine content is approximately 70.7 grams. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. CONSTITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>66288-1100-1</NDCCode>
<PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 BAG (66288-1100-1) </PackageDescription>
<NDC11Code>66288-1100-01</NDC11Code>
<ProductNDC>66288-1100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefazolin</ProprietaryName>
<NonProprietaryName>Cefazolin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20070101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065141</ApplicationNumber>
<LabelerName>Samson Medical Technologies, L.L.C.</LabelerName>
<SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefazolin and other antibacterial drugs, cefazolin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefazolin for Injection is indicated for the treatment of the following infections when caused by susceptible bacteria.</IndicationAndUsage>
<Description>Cefazolin for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than a 250 mg dose of cefazolin. Cefazolin for Injection, USP, is a sterile, lyophilized, semisynthetic cephalosporin for intravenous administration. It is the sodium salt of 3-{[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7- [2-(1H -tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. Each Pharmacy Bulk Package contains 48 mg (2.1 mEq) of sodium per 1 gram of cefazolin sodium. Cefazolin for Injection, USP, is supplied in 100 grams and 300 grams SmartPak® Pharmacy Bulk Packages bags equivalent. Each SmartPak® Pharmacy Bulk Package bag contains cefazolin sodium equivalent to 100 grams or 300 grams of cefazolin. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 mg per mL AND FURTHER DILUTION IN 50 mL OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. A Pharmacy Bulk Package is a container of a sterile preparation for intravenous use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. The molecular formula is C14H13N8NaO4S3. The molecular weight is 476.49. The structural formula is as follows. The pH of the reconstituted solution is between 4 and 6.</Description>
</NDC>
<NDC>
<NDCCode>66288-1300-1</NDCCode>
<PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 BAG (66288-1300-1) </PackageDescription>
<NDC11Code>66288-1300-01</NDC11Code>
<ProductNDC>66288-1300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefazolin</ProprietaryName>
<NonProprietaryName>Cefazolin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20070101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065141</ApplicationNumber>
<LabelerName>Samson Medical Technologies, L.L.C.</LabelerName>
<SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefazolin and other antibacterial drugs, cefazolin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefazolin for Injection is indicated for the treatment of the following infections when caused by susceptible bacteria.</IndicationAndUsage>
<Description>Cefazolin for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than a 250 mg dose of cefazolin. Cefazolin for Injection, USP, is a sterile, lyophilized, semisynthetic cephalosporin for intravenous administration. It is the sodium salt of 3-{[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7- [2-(1H -tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. Each Pharmacy Bulk Package contains 48 mg (2.1 mEq) of sodium per 1 gram of cefazolin sodium. Cefazolin for Injection, USP, is supplied in 100 grams and 300 grams SmartPak® Pharmacy Bulk Packages bags equivalent. Each SmartPak® Pharmacy Bulk Package bag contains cefazolin sodium equivalent to 100 grams or 300 grams of cefazolin. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 mg per mL AND FURTHER DILUTION IN 50 mL OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. A Pharmacy Bulk Package is a container of a sterile preparation for intravenous use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. The molecular formula is C14H13N8NaO4S3. The molecular weight is 476.49. The structural formula is as follows. The pH of the reconstituted solution is between 4 and 6.</Description>
</NDC>
<NDC>
<NDCCode>66288-2075-1</NDCCode>
<PackageDescription>1 INJECTION, POWDER, FOR SOLUTION in 1 BAG (66288-2075-1)</PackageDescription>
<NDC11Code>66288-2075-01</NDC11Code>
<ProductNDC>66288-2075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime Sodium</ProprietaryName>
<NonProprietaryName>Cefuroxime Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065251</ApplicationNumber>
<LabelerName>Samson Medical Technologies, L.L.C.</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-04-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>66288-2225-1</NDCCode>
<PackageDescription>1 INJECTION, POWDER, FOR SOLUTION in 1 BAG (66288-2225-1)</PackageDescription>
<NDC11Code>66288-2225-01</NDC11Code>
<ProductNDC>66288-2225</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime Sodium</ProprietaryName>
<NonProprietaryName>Cefuroxime Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065251</ApplicationNumber>
<LabelerName>Samson Medical Technologies, L.L.C.</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>225</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-04-13</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>66288-4100-1</NDCCode>
<PackageDescription>1 BAG in 1 BAG (66288-4100-1) > 1 INJECTION, POWDER, FOR SOLUTION in 1 BAG</PackageDescription>
<NDC11Code>66288-4100-01</NDC11Code>
<ProductNDC>66288-4100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefoxitin</ProprietaryName>
<NonProprietaryName>Cefoxitin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200938</ApplicationNumber>
<LabelerName>SAMSON MEDICAL TECHNOLOGIES LLC</LabelerName>
<SubstanceName>CEFOXITIN SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefoxitin and other antibacterial drugs, Cefoxitin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cefoxitin for Injection, USP, Pharmacy Bulk Package bag SmartPak® should be used only in patients who require a 1 gram dose and not any fraction thereof. Cefoxitin for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than the 1 gram dose of cefoxitin. Cefoxitin for Injection, USP is a semi-synthetic, broad-spectrum cepha antibiotic for intravenous administration. It is derived from cephamycin C, which is produced by Streptomyces lactamdurans. Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C16H16N3NaO7S2, and the structural formula is. Cefoxitin for Injection contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 50 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE. Each SmartPak® Pharmacy Bulk Package contains sterile Cefoxitin Sodium, USP equivalent to 100 grams of cefoxitin and is intended for intravenous infusion only. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSITITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. CEFOXITIN FOR INJECTION, USP SMARTPAK® PHARMACY BULK PACKAGE SHOULD NOT BE USED IN PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE OF CEFOXTIN.</Description>
</NDC>
<NDC>
<NDCCode>66288-6100-1</NDCCode>
<PackageDescription>1 INJECTION, POWDER, FOR SOLUTION in 1 BAG (66288-6100-1) </PackageDescription>
<NDC11Code>66288-6100-01</NDC11Code>
<ProductNDC>66288-6100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftriaxone</ProprietaryName>
<NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20140630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090057</ApplicationNumber>
<LabelerName>Samson Medical Technologies, LLC</LabelerName>
<SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection and other antibacterial drugs, Ceftriaxone for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection is indicated for the treatment of the following infections when caused by susceptible bacteria.</IndicationAndUsage>
<Description>Ceftriaxone for Injection, USP, Pharmacy Bulk Package bag SmartPak® should be used only in patients who require a 1 gram dose and not any fraction thereof. Ceftriaxone for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than the 1 gram dose of ceftriaxone. Ceftriaxone for Injection, USP, is a sterile, semisynthetic, broad-spectrum cephalosporin antibacterial for intravenous administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.60 and the following structural formula. Ceftriaxone sodium is a white to yellowish-orange crystalline powder, which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage and concentration. Each Pharmacy Bulk Package contains approximately 83 mg (3.6 mEq) of sodium per 1 gram of ceftriaxone activity. Ceftriaxone for Injection, USP is supplied in 100 grams SmartPak® Pharmacy Bulk Packages bags equivalent. Each SmartPak® Pharmacy Bulk Package bag contains ceftriaxone sodium, USP equivalent to 100 grams of ceftriaxone. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 mg per mL AND FURTHER DILUTION IN 50 mL OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY OVER 30 MINUTES. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC PATIENTS AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion.</Description>
</NDC>
<NDC>
<NDCCode>66288-7100-1</NDCCode>
<PackageDescription>1 BAG in 1 BAG (66288-7100-1) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 BAG</PackageDescription>
<NDC11Code>66288-7100-01</NDC11Code>
<ProductNDC>66288-7100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091532</ApplicationNumber>
<LabelerName>SAMSON MEDICAL TECHNOLOGIES LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (beta-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, and skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by Streptococcus viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, vancomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infection.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than a 500 mg dose of vancomycin. Vancomycin Hydrochloride for Injection, USP is a white to almost white to brownish lyophilized powder for preparing intravenous (I.V.) infusions, in bags containing the equivalent of 100 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 100 mg/mL, a clear, brownish-yellow solution is formed with the pH of the solution between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Each SmartPak® Pharmacy Bulk Package contains Vancomycin Hydrochloride for Injection, USP equivalent to 100 grams of vancomycin activity and is intended for intravenous infusion only following further dilution. A Pharmacy Bulk Package is a sterile dosage form containing many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. VANCOMYCIN HYDROCHLORIDE FOR INJECTION PHARMACY BULK PACKAGE BAG SMARTPAK® SHOULD NOT BE USED IN PATIENTS WHO REQUIRE LESS THAN A 500 MG DOSE OF VANCOMYCIN. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 100 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 500 MG DOSE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin Hydrochloride has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0067-8100-12</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0067-8100-12) > 12 g in 1 TUBE</PackageDescription>
<NDC11Code>00067-8100-12</NDC11Code>
<ProductNDC>0067-8100</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lamisil At</ProprietaryName>
<NonProprietaryName>Terbinafine Hydrochloride</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20070702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077511</ApplicationNumber>
<LabelerName>GlaxoSmithKline Consumer Healthcare Holdings (US) LLC</LabelerName>
<SubstanceName>TERBINAFINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Allylamine Antifungal [EPC], Allylamine [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>cures most athlete's foot (tinea pedis). cures most jock itch (tinea cruris) and ringworm (tinea corporis). relieves itching, burning, cracking and scaling which accompany these conditions.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0067-8100-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0067-8100-15) > 15 g in 1 TUBE</PackageDescription>
<NDC11Code>00067-8100-15</NDC11Code>
<ProductNDC>0067-8100</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lamisil At</ProprietaryName>
<NonProprietaryName>Terbinafine Hydrochloride</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20070702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077511</ApplicationNumber>
<LabelerName>GlaxoSmithKline Consumer Healthcare Holdings (US) LLC</LabelerName>
<SubstanceName>TERBINAFINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Allylamine Antifungal [EPC], Allylamine [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170424</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>cures most athlete's foot (tinea pedis). cures most jock itch (tinea cruris) and ringworm (tinea corporis). relieves itching, burning, cracking and scaling which accompany these conditions.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0067-8100-30</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0067-8100-30) > 30 g in 1 TUBE</PackageDescription>
<NDC11Code>00067-8100-30</NDC11Code>
<ProductNDC>0067-8100</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lamisil At</ProprietaryName>
<NonProprietaryName>Terbinafine Hydrochloride</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20070702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077511</ApplicationNumber>
<LabelerName>GlaxoSmithKline Consumer Healthcare Holdings (US) LLC</LabelerName>
<SubstanceName>TERBINAFINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Allylamine Antifungal [EPC], Allylamine [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>cures most athlete's foot (tinea pedis). cures most jock itch (tinea cruris) and ringworm (tinea corporis). relieves itching, burning, cracking and scaling which accompany these conditions.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0113-8100-00</NDCCode>
<PackageDescription>310 BLISTER PACK in 1 CARTON (0113-8100-00) / 1 GUM, CHEWING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00113-8100-00</NDC11Code>
<ProductNDC>0113-8100</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Good Sense Nicotine</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>GUM, CHEWING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206394</ApplicationNumber>
<LabelerName>L. Perrigo Company</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0113-8100-25</NDCCode>
<PackageDescription>110 BLISTER PACK in 1 CARTON (0113-8100-25) / 1 GUM, CHEWING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00113-8100-25</NDC11Code>
<ProductNDC>0113-8100</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Good Sense Nicotine</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>GUM, CHEWING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206394</ApplicationNumber>
<LabelerName>L. Perrigo Company</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0113-8100-29</NDCCode>
<PackageDescription>220 BLISTER PACK in 1 CARTON (0113-8100-29) / 1 GUM, CHEWING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00113-8100-29</NDC11Code>
<ProductNDC>0113-8100</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Good Sense Nicotine</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>GUM, CHEWING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206394</ApplicationNumber>
<LabelerName>L. Perrigo Company</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0169-8100-01</NDCCode>
<PackageDescription>1 KIT in 1 KIT (0169-8100-01) * 4 mL in 1 VIAL, GLASS (0169-8101-90) * 4 mL in 1 SYRINGE, GLASS (0169-8008-98) * 4 mL in 1 VIAL, GLASS (0169-8101-11) </PackageDescription>
<NDC11Code>00169-8100-01</NDC11Code>
<ProductNDC>0169-8100</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Esperoct</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant), Glycopegylated-exei</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20190219</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125671</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-07-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ESPEROCT [antihemophilic factor (recombinant), glycopegylated-exei] is a recombinant DNA-derived coagulation Factor VIII concentrate indicated for use in adults and children with hemophilia A for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes.</IndicationAndUsage>
<Description>ESPEROCT is a sterile, preservative-free, non-pyrogenic lyophilized powder for intravenous injection after reconstitution with the provided saline diluent. The active ingredient in ESPEROCT is a recombinant analogue of human coagulation Factor VIII (FVIII) conjugated with a 40-kDa polyethylene glycol (PEG) molecule. ESPEROCT is formulated with the following excipients: sodium chloride, L-histidine, sucrose, polysorbate 80, L-methionine, and calcium chloride. FVIII activity in ESPEROCT is determined using the chromogenic assay described in the European Pharmacopoeia. The activity assignment employs a FVIII reference material that is traceable to the current World Health Organization (WHO) international standard for FVIII concentrate, and evaluated by appropriate methodologies to ensure the accuracy of the results. ESPEROCT is available in single-dose vials that contain nominally 500, 1000, 1500, 2000, 3000, 4000, or 5000 IU of FVIII. Each vial of ESPEROCT is labeled with the actual FVIII activity. After reconstitution with the supplied diluent (0.9% saline), each mL of the solution contains approximately 125, 250, 375, 500, 750, 1000, or 1250 IU of FVIII, respectively. The FVIII protein in ESPEROCT is produced in Chinese Hamster Ovary (CHO) cells using recombinant DNA technology, and contains a truncated B domain, which is O-glycosylated. The polypeptide part of the molecule has a molecular mass of 166 kDa (calculated excluding post-translational modifications) and represents a heterodimer of a heavy chain and a light chain, which are held together by non-covalent interactions. The recombinant FVIII protein is purified using a series of chromatographic steps, one of which is affinity chromatography, with the use of a monoclonal antibody to selectively isolate the rFVIII from the cell culture medium. The 40-kDa PEG molecule is conjugated to the O-glycan moiety of the B domain using an enzymatic reaction to produce a glycopegylated FVIII (FVIII-PEG). The purification process includes two viral clearance steps, namely detergent treatment for inactivation of enveloped viruses, and 20-nm filtration for removal of enveloped and non-enveloped viruses. No additives of human or animal origin are used during the manufacturing process and formulation of ESPEROCT. In the blood circulation, when FVIII-PEG is activated by thrombin, the B-domain portion with the attached PEG moiety is cleaved off, and the resulting activated FVIII (FVIIIa) is similar in structure and function to native FVIIIa.</Description>
</NDC>
<NDC>
<NDCCode>0169-8100-93</NDCCode>
<PackageDescription>1 KIT in 1 KIT (0169-8100-93) * 4 mL in 1 VIAL, GLASS (0169-8101-90) * 4 mL in 1 SYRINGE, GLASS (0169-8008-98) * 4 mL in 1 VIAL, GLASS (0169-8101-11) </PackageDescription>
<NDC11Code>00169-8100-93</NDC11Code>
<ProductNDC>0169-8100</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Esperoct</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant), Glycopegylated-exei</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20190219</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125671</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-07-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ESPEROCT [antihemophilic factor (recombinant), glycopegylated-exei] is a recombinant DNA-derived coagulation Factor VIII concentrate indicated for use in adults and children with hemophilia A for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes.</IndicationAndUsage>
<Description>ESPEROCT is a sterile, preservative-free, non-pyrogenic lyophilized powder for intravenous injection after reconstitution with the provided saline diluent. The active ingredient in ESPEROCT is a recombinant analogue of human coagulation Factor VIII (FVIII) conjugated with a 40-kDa polyethylene glycol (PEG) molecule. ESPEROCT is formulated with the following excipients: sodium chloride, L-histidine, sucrose, polysorbate 80, L-methionine, and calcium chloride. FVIII activity in ESPEROCT is determined using the chromogenic assay described in the European Pharmacopoeia. The activity assignment employs a FVIII reference material that is traceable to the current World Health Organization (WHO) international standard for FVIII concentrate, and evaluated by appropriate methodologies to ensure the accuracy of the results. ESPEROCT is available in single-dose vials that contain nominally 500, 1000, 1500, 2000, 3000, 4000, or 5000 IU of FVIII. Each vial of ESPEROCT is labeled with the actual FVIII activity. After reconstitution with the supplied diluent (0.9% saline), each mL of the solution contains approximately 125, 250, 375, 500, 750, 1000, or 1250 IU of FVIII, respectively. The FVIII protein in ESPEROCT is produced in Chinese Hamster Ovary (CHO) cells using recombinant DNA technology, and contains a truncated B domain, which is O-glycosylated. The polypeptide part of the molecule has a molecular mass of 166 kDa (calculated excluding post-translational modifications) and represents a heterodimer of a heavy chain and a light chain, which are held together by non-covalent interactions. The recombinant FVIII protein is purified using a series of chromatographic steps, one of which is affinity chromatography, with the use of a monoclonal antibody to selectively isolate the rFVIII from the cell culture medium. The 40-kDa PEG molecule is conjugated to the O-glycan moiety of the B domain using an enzymatic reaction to produce a glycopegylated FVIII (FVIII-PEG). The purification process includes two viral clearance steps, namely detergent treatment for inactivation of enveloped viruses, and 20-nm filtration for removal of enveloped and non-enveloped viruses. No additives of human or animal origin are used during the manufacturing process and formulation of ESPEROCT. In the blood circulation, when FVIII-PEG is activated by thrombin, the B-domain portion with the attached PEG moiety is cleaved off, and the resulting activated FVIII (FVIIIa) is similar in structure and function to native FVIIIa.</Description>
</NDC>
<NDC>
<NDCCode>0268-8100-10</NDCCode>
<PackageDescription>10.5 mL in 1 VIAL (0268-8100-10) </PackageDescription>
<NDC11Code>00268-8100-10</NDC11Code>
<ProductNDC>0268-8100</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Mucor Plumbeus</ProprietaryName>
<NonProprietaryName>Mucor Plumbeus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>MUCOR PLUMBEUS</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust, molds, animal danders, various other inhalants, and in situations where the offending allergen cannot be avoided. Prior to initiation of therapy, the clinical sensitivity should be established by careful evaluation of the patient’s history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided.</IndicationAndUsage>
<Description>Sterile therapeutic extracts are supplied in either Phenol Saline Diluent or in Diluent containing Glycerin 50% (v/v) for subcutaneous injection. Inactive ingredients may include: Sodium Chloride for isotonicity, Glycerin, and Sodium Bicarbonate as buffering agents. These products are compounded and diluted on a w/v or PNU basis. Pollens are individually extracted from pure pollen extracted in a phenol-preserved sodium bicarbonate solution. Short Ragweed and Mixed (Tall and Short) Ragweed extracts are standardized by Antigen E content and so labeled. The Antigen E content of extracts containing Short Ragweed at a concentration more dilute than a weight/volume ratio of 1:10 are obtained by calculating the Antigen E content based on the assay value of more concentrated extract. Pollen extracts are filtered aseptically and, after final packaging, they are tested for sterility and safety. Molds are individually extracted from pure powdered inactivated mold source material extracted in phenol preserved saline. Mold extracts are filtered aseptically and after final packaging are tested for sterility and safety. Molds are present in all inhabited places at all seasons of the year; they are so ubiquitous that they are prevalent at times when common allergic pollens and other inhalants are not. In the home and surroundings, molds are found in upholstered furniture, mattresses, drapes, cellar and storage room dust, woolens, leather goods, fruits, meats, cheeses, garden soil and on plants. Spores, mycelial fragments and mold residues are thus inhaled, contacted and ingested continuously. Miscellaneous inhalants and epidermals are individually extracted in phenol preserved saline, filtered aseptically and after final packaging are tested for sterility and safety.</Description>
</NDC>
<NDC>
<NDCCode>0268-8100-50</NDCCode>
<PackageDescription>53 mL in 1 VIAL (0268-8100-50) </PackageDescription>
<NDC11Code>00268-8100-50</NDC11Code>
<ProductNDC>0268-8100</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Mucor Plumbeus</ProprietaryName>
<NonProprietaryName>Mucor Plumbeus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19650101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103753</ApplicationNumber>
<LabelerName>ALK-Abello, Inc.</LabelerName>
<SubstanceName>MUCOR PLUMBEUS</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19650101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hyposensitization (injection) therapy is a treatment for patients exhibiting allergic reactions to seasonal pollens, dust, molds, animal danders, various other inhalants, and in situations where the offending allergen cannot be avoided. Prior to initiation of therapy, the clinical sensitivity should be established by careful evaluation of the patient’s history confirmed by diagnostic skin testing. Hyposensitization should not be prescribed for sensitivities to allergens which can easily be avoided.</IndicationAndUsage>
<Description>Sterile therapeutic extracts are supplied in either Phenol Saline Diluent or in Diluent containing Glycerin 50% (v/v) for subcutaneous injection. Inactive ingredients may include: Sodium Chloride for isotonicity, Glycerin, and Sodium Bicarbonate as buffering agents. These products are compounded and diluted on a w/v or PNU basis. Pollens are individually extracted from pure pollen extracted in a phenol-preserved sodium bicarbonate solution. Short Ragweed and Mixed (Tall and Short) Ragweed extracts are standardized by Antigen E content and so labeled. The Antigen E content of extracts containing Short Ragweed at a concentration more dilute than a weight/volume ratio of 1:10 are obtained by calculating the Antigen E content based on the assay value of more concentrated extract. Pollen extracts are filtered aseptically and, after final packaging, they are tested for sterility and safety. Molds are individually extracted from pure powdered inactivated mold source material extracted in phenol preserved saline. Mold extracts are filtered aseptically and after final packaging are tested for sterility and safety. Molds are present in all inhabited places at all seasons of the year; they are so ubiquitous that they are prevalent at times when common allergic pollens and other inhalants are not. In the home and surroundings, molds are found in upholstered furniture, mattresses, drapes, cellar and storage room dust, woolens, leather goods, fruits, meats, cheeses, garden soil and on plants. Spores, mycelial fragments and mold residues are thus inhaled, contacted and ingested continuously. Miscellaneous inhalants and epidermals are individually extracted in phenol preserved saline, filtered aseptically and after final packaging are tested for sterility and safety.</Description>
</NDC>
<NDC>
<NDCCode>0363-8100-12</NDCCode>
<PackageDescription>355 mL in 1 BOTTLE (0363-8100-12) </PackageDescription>
<NDC11Code>00363-8100-12</NDC11Code>
<ProductNDC>0363-8100</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Walgreens</ProprietaryName>
<ProprietaryNameSuffix>Cold Cough And Flu Relief</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250401</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>WALGREENS CO.</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>650; 20</StrengthNumber>
<StrengthUnit>mg/30mL; mg/30mL</StrengthUnit>
<Pharm_Classes>Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses: 1 temporarily relieves these symptoms due to a cold or flu: minor aches and painsheadachecoughsore throat, 2 temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0615-8100-05</NDCCode>
<PackageDescription>15 TABLET in 1 BLISTER PACK (0615-8100-05) </PackageDescription>
<NDC11Code>00615-8100-05</NDC11Code>
<ProductNDC>0615-8100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine</ProprietaryName>
<NonProprietaryName>Memantine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150711</StartMarketingDate>
<EndMarketingDate>20210731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090048</ApplicationNumber>
<LabelerName>NCS HealthCare of KY, Inc dba Vangard Labs</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>NMDA Receptor Antagonists [MoA],N-methyl-D-aspartate Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-08-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190416</StartMarketingDatePackage>
<EndMarketingDatePackage>20210731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.</IndicationAndUsage>
<Description>Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula:. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine HCl USP occurs as a white to off-white colored powder and is slightly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride tablets are available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, povidone and talc. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, polyethylene glycol, titanium dioxide, FD & C Yellow #6 and FD & C blue #2 (5 mg tablets), black iron oxide (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>0615-8100-39</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (0615-8100-39) </PackageDescription>
<NDC11Code>00615-8100-39</NDC11Code>
<ProductNDC>0615-8100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine</ProprietaryName>
<NonProprietaryName>Memantine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150711</StartMarketingDate>
<EndMarketingDate>20210731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090048</ApplicationNumber>
<LabelerName>NCS HealthCare of KY, Inc dba Vangard Labs</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>NMDA Receptor Antagonists [MoA],N-methyl-D-aspartate Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-08-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190416</StartMarketingDatePackage>
<EndMarketingDatePackage>20210731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.</IndicationAndUsage>
<Description>Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula:. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine HCl USP occurs as a white to off-white colored powder and is slightly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride tablets are available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, povidone and talc. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, polyethylene glycol, titanium dioxide, FD & C Yellow #6 and FD & C blue #2 (5 mg tablets), black iron oxide (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>10819-8100-0</NDCCode>
<PackageDescription>208197 mL in 1 DRUM (10819-8100-0) </PackageDescription>
<NDC11Code>10819-8100-00</NDC11Code>
<ProductNDC>10819-8100</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<StartMarketingDate>20210519</StartMarketingDate>
<EndMarketingDate>20220826</EndMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Professional Disposables International, Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.13</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>19-MAY-21</StartMarketingDatePackage>
<EndMarketingDatePackage>26-AUG-22</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>17856-8100-1</NDCCode>
<PackageDescription>200 POUCH in 1 BOX (17856-8100-1) > 1 TABLET, FILM COATED in 1 POUCH</PackageDescription>
<NDC11Code>17856-8100-01</NDC11Code>
<ProductNDC>17856-8100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil Citrate</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204883</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). ( 1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. ( 1, 14).</IndicationAndUsage>
<Description>Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H-pyrazolo [4,3- d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin.</Description>
</NDC>
<NDC>
<NDCCode>17856-8100-2</NDCCode>
<PackageDescription>200 POUCH in 1 BOX (17856-8100-2) > 2 TABLET, FILM COATED in 1 POUCH</PackageDescription>
<NDC11Code>17856-8100-02</NDC11Code>
<ProductNDC>17856-8100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil Citrate</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204883</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). ( 1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. ( 1, 14).</IndicationAndUsage>
<Description>Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H-pyrazolo [4,3- d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin.</Description>
</NDC>
<NDC>
<NDCCode>17856-8100-3</NDCCode>
<PackageDescription>200 POUCH in 1 BOX (17856-8100-3) > 3 TABLET, FILM COATED in 1 POUCH</PackageDescription>
<NDC11Code>17856-8100-03</NDC11Code>
<ProductNDC>17856-8100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil Citrate</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204883</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). ( 1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. ( 1, 14).</IndicationAndUsage>
<Description>Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H-pyrazolo [4,3- d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin.</Description>
</NDC>
<NDC>
<NDCCode>17856-8100-4</NDCCode>
<PackageDescription>200 POUCH in 1 BOX (17856-8100-4) > 4 TABLET, FILM COATED in 1 POUCH</PackageDescription>
<NDC11Code>17856-8100-04</NDC11Code>
<ProductNDC>17856-8100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil Citrate</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204883</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). ( 1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. ( 1, 14).</IndicationAndUsage>
<Description>Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H-pyrazolo [4,3- d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin.</Description>
</NDC>
<NDC>
<NDCCode>17856-8100-5</NDCCode>
<PackageDescription>200 POUCH in 1 BOX (17856-8100-5) > 5 TABLET, FILM COATED in 1 POUCH</PackageDescription>
<NDC11Code>17856-8100-05</NDC11Code>
<ProductNDC>17856-8100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil Citrate</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204883</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). ( 1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. ( 1, 14).</IndicationAndUsage>
<Description>Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H-pyrazolo [4,3- d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin.</Description>
</NDC>
<NDC>
<NDCCode>44224-0102-0</NDCCode>
<PackageDescription>1 KIT in 1 BAG (44224-0102-0) * .5 g in 1 PACKET (61010-8100-2)</PackageDescription>
<NDC11Code>44224-0102-00</NDC11Code>
<ProductNDC>44224-0102</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Adventure Medical Kits Dental Medic</ProprietaryName>
<NonProprietaryName>Benzocaine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>ORAL; TOPICAL</RouteName>
<StartMarketingDate>20120919</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Tender Corporation</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Temporarily relieves pain caused by: toothache, dental work, minor irritation or injury of the mouth and gums, canker sores, cheek bites, gum sores, and denture irritation.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>48951-8100-2</NDCCode>
<PackageDescription>1350 PELLET in 1 BOTTLE, GLASS (48951-8100-2)</PackageDescription>
<NDC11Code>48951-8100-02</NDC11Code>
<ProductNDC>48951-8100</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pulsatilla Tormentilla Pms Relief</ProprietaryName>
<NonProprietaryName>Mammal Liver Pulsatilla Vulgaris Achillea Millefolium</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091211</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Uriel Pharmacy Inc</LabelerName>
<SubstanceName>MAMMAL LIVER; PULSATILLA VULGARIS; ACHILLEA MILLEFOLIUM</SubstanceName>
<StrengthNumber>4; 12; 30</StrengthNumber>
<StrengthUnit>[hp_X]/1; [hp_X]/1; [hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50090-8100-0</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50090-8100-0) </PackageDescription>
<NDC11Code>50090-8100-00</NDC11Code>
<ProductNDC>50090-8100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ezetimibe</ProprietaryName>
<NonProprietaryName>Ezetimibe</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210673</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>EZETIMIBE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Cholesterol Absorption [PE], Dietary Cholesterol Absorption Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20261006</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>