{
"NDC": [
{
"NDCCode": "66298-2856-3",
"PackageDescription": "200 mL in 1 BAG (66298-2856-3) ",
"NDC11Code": "66298-2856-03",
"ProductNDC": "66298-2856",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naropin",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20110531",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020533",
"LabelerName": "Fresenius Kabi Norge AS",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"StartMarketingDatePackage": "20110531",
"SamplePackage": "N"
},
{
"NDCCode": "66298-2856-1",
"PackageDescription": "100 mL in 1 BAG (66298-2856-1) ",
"NDC11Code": "66298-2856-01",
"ProductNDC": "66298-2856",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naropin",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20110531",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020533",
"LabelerName": "Fresenius Kabi Norge AS",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"StartMarketingDatePackage": "20110531",
"SamplePackage": "N"
},
{
"NDCCode": "66298-1060-3",
"PackageDescription": "50 mL in 1 BAG (66298-1060-3)",
"NDC11Code": "66298-1060-03",
"ProductNDC": "66298-1060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate",
"NonProprietaryName": "Magnesium Sulfate Heptahydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206485",
"LabelerName": "Fresenius Kabi Norge AS",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-30",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": "Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in pre-eclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate, USP heptahydrate is chemically designated MgSO 4 7H 2O, colorless crystals or white powder freely soluble in water. Water for injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "66298-7131-3",
"PackageDescription": "300 mL in 1 BAG (66298-7131-3) ",
"NDC11Code": "66298-7131-03",
"ProductNDC": "66298-7131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linezolid",
"NonProprietaryName": "Linezolid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204764",
"LabelerName": "Hp Halden Pharma AS",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Active",
"LastUpdate": "2024-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170727",
"SamplePackage": "N",
"Description": "Linezolid injection contains linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. Its structural formula is. C 16H 20FN 3O 4 M.W. 337.35. Linezolid injection is supplied as a ready-to-use sterile isotonic solution for intravenous infusion. Each mL contains 2 mg of linezolid. Inactive ingredients are sodium citrate, citric acid, and dextrose in an aqueous vehicle for intravenous administration. The sodium (Na +) content is 0.38 mg/mL (5 mEq per 300 mL flexible plastic container). pH adjusted to 4.8 with sodium hydroxide or hydrochloric acid."
},
{
"NDCCode": "36987-2856-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-2856-3)",
"NDC11Code": "36987-2856-03",
"ProductNDC": "36987-2856",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gambil Oak",
"NonProprietaryName": "Gambil Oak",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "QUERCUS GAMBELII POLLEN",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-2856-3",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (37662-2856-3) ",
"NDC11Code": "37662-2856-03",
"ProductNDC": "37662-2856",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Manganum Oxydatum Nigrum",
"NonProprietaryName": "Manganum Oxydatum Nigrum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230328",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "MANGANESE DIOXIDE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-03-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230328",
"SamplePackage": "N"
},
{
"NDCCode": "62991-2856-3",
"PackageDescription": "100 g in 1 JAR (62991-2856-3)",
"NDC11Code": "62991-2856-03",
"ProductNDC": "62991-2856",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Levodopa",
"DosageFormName": "POWDER",
"StartMarketingDate": "20101028",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "LETCO MEDICAL, LLC",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "65044-2856-3",
"PackageDescription": "30 mL in 1 VIAL (65044-2856-3) ",
"NDC11Code": "65044-2856-03",
"ProductNDC": "65044-2856",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Pollens - Trees, Tree Mix 5",
"NonProprietaryName": "Tree Mix 5",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "CARYA ILLINOINENSIS POLLEN; ACER SACCHARUM POLLEN; ACER NEGUNDO POLLEN; ACER RUBRUM POLLEN; QUERCUS RUBRA POLLEN; QUERCUS VIRGINIANA POLLEN; QUERCUS ALBA POLLEN; PLATANUS OCCIDENTALIS POLLEN; SALIX NIGRA POLLEN",
"StrengthNumber": ".1; .033; .033; .033; .033; .033; .033; .1; .1",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.",
"Description": "Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas."
},
{
"NDCCode": "68071-2856-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (68071-2856-3) ",
"NDC11Code": "68071-2856-03",
"ProductNDC": "68071-2856",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207510",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "325; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20221024",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets, is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets, for use in patients for whom alternative treatment options [e.g., non-opioid analgesics] Have not been tolerated, or are not expected to be tolerated, Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone Hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg Inactive Ingredients. The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18H 21NO 4 · HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula:. Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8H 9NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula:."
},
{
"NDCCode": "0228-2856-09",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (0228-2856-09) ",
"NDC11Code": "00228-2856-09",
"ProductNDC": "0228-2856",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200910",
"EndMarketingDate": "20240531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091025",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200910",
"EndMarketingDatePackage": "20240531",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for: 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is - 1.35. Pregabalin capsules are administered orally and are supplied as imprinted, hard gelatin capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin USP, along with corn starch, mannitol, pregelatinized corn starch, talc as inactive ingredients. Each of the capsule shells contain gelatin, titanium dioxide. In addition, the 25 mg capsule shells also contain D&C Yellow #10, FD&C Yellow #6. The 50 mg capsule shells also contain D&C Yellow #10. The 75 mg capsule shells also contain D&C Yellow #10, red iron oxide, and yellow iron oxide. The 100 mg capsule shells also contain D&C Yellow #10 and yellow iron oxide. The 150 mg capsule shells also contain D&C Yellow #10, FD&C Yellow #6. The 200 mg capsule shells also contain D&C Yellow #10 and yellow iron oxide. The 225 mg capsule shells also contain D&C Yellow #10, red iron oxide and yellow iron oxide. The 300 mg capsule shells also contain D&C Yellow #10, FD&C Yellow #6 and yellow iron oxide. The capsules are imprinted with black Tek-Print ink SW-9008 and SW-9009 which contain black iron oxide, potassium hydroxide, propylene glycol and shellac."
},
{
"NDCCode": "0703-2856-04",
"PackageDescription": "25 VIAL, SINGLE-USE in 1 TRAY (0703-2856-04) > 20 mL in 1 VIAL, SINGLE-USE (0703-2856-01)",
"NDC11Code": "00703-2856-04",
"ProductNDC": "0703-2856",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propofol",
"NonProprietaryName": "Propofol",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20070621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075102",
"LabelerName": "Teva Parenteral Medicines, Inc.",
"SubstanceName": "PROPOFOL",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE],General Anesthetic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-02-03"
},
{
"NDCCode": "36987-2856-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-2856-1)",
"NDC11Code": "36987-2856-01",
"ProductNDC": "36987-2856",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gambil Oak",
"NonProprietaryName": "Gambil Oak",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "QUERCUS GAMBELII POLLEN",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-2856-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-2856-2)",
"NDC11Code": "36987-2856-02",
"ProductNDC": "36987-2856",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gambil Oak",
"NonProprietaryName": "Gambil Oak",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "QUERCUS GAMBELII POLLEN",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-2856-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-2856-4)",
"NDC11Code": "36987-2856-04",
"ProductNDC": "36987-2856",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gambil Oak",
"NonProprietaryName": "Gambil Oak",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "QUERCUS GAMBELII POLLEN",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-2856-1",
"PackageDescription": "80 PELLET in 1 VIAL, GLASS (37662-2856-1) ",
"NDC11Code": "37662-2856-01",
"ProductNDC": "37662-2856",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Manganum Oxydatum Nigrum",
"NonProprietaryName": "Manganum Oxydatum Nigrum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230328",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "MANGANESE DIOXIDE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-03-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230328",
"SamplePackage": "N"
},
{
"NDCCode": "37662-2856-2",
"PackageDescription": "200 PELLET in 1 VIAL, GLASS (37662-2856-2) ",
"NDC11Code": "37662-2856-02",
"ProductNDC": "37662-2856",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Manganum Oxydatum Nigrum",
"NonProprietaryName": "Manganum Oxydatum Nigrum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230328",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "MANGANESE DIOXIDE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-03-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230328",
"SamplePackage": "N"
},
{
"NDCCode": "37662-2856-4",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (37662-2856-4) ",
"NDC11Code": "37662-2856-04",
"ProductNDC": "37662-2856",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Manganum Oxydatum Nigrum",
"NonProprietaryName": "Manganum Oxydatum Nigrum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230328",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "MANGANESE DIOXIDE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-03-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230328",
"SamplePackage": "N"
},
{
"NDCCode": "62991-2856-1",
"PackageDescription": "5 g in 1 JAR (62991-2856-1)",
"NDC11Code": "62991-2856-01",
"ProductNDC": "62991-2856",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Levodopa",
"DosageFormName": "POWDER",
"StartMarketingDate": "20101028",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "LETCO MEDICAL, LLC",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "62991-2856-2",
"PackageDescription": "25 g in 1 JAR (62991-2856-2)",
"NDC11Code": "62991-2856-02",
"ProductNDC": "62991-2856",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Levodopa",
"DosageFormName": "POWDER",
"StartMarketingDate": "20101028",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "LETCO MEDICAL, LLC",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "62991-2856-4",
"PackageDescription": "500 g in 1 JAR (62991-2856-4)",
"NDC11Code": "62991-2856-04",
"ProductNDC": "62991-2856",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Levodopa",
"DosageFormName": "POWDER",
"StartMarketingDate": "20101028",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "LETCO MEDICAL, LLC",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "65044-2856-2",
"PackageDescription": "10 mL in 1 VIAL (65044-2856-2) ",
"NDC11Code": "65044-2856-02",
"ProductNDC": "65044-2856",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Pollens - Trees, Tree Mix 5",
"NonProprietaryName": "Tree Mix 5",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "CARYA ILLINOINENSIS POLLEN; ACER SACCHARUM POLLEN; ACER NEGUNDO POLLEN; ACER RUBRUM POLLEN; QUERCUS RUBRA POLLEN; QUERCUS VIRGINIANA POLLEN; QUERCUS ALBA POLLEN; PLATANUS OCCIDENTALIS POLLEN; SALIX NIGRA POLLEN",
"StrengthNumber": ".1; .033; .033; .033; .033; .033; .033; .1; .1",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.",
"Description": "Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas."
},
{
"NDCCode": "65044-2856-4",
"PackageDescription": "50 mL in 1 VIAL (65044-2856-4) ",
"NDC11Code": "65044-2856-04",
"ProductNDC": "65044-2856",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Pollens - Trees, Tree Mix 5",
"NonProprietaryName": "Tree Mix 5",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "CARYA ILLINOINENSIS POLLEN; ACER SACCHARUM POLLEN; ACER NEGUNDO POLLEN; ACER RUBRUM POLLEN; QUERCUS RUBRA POLLEN; QUERCUS VIRGINIANA POLLEN; QUERCUS ALBA POLLEN; PLATANUS OCCIDENTALIS POLLEN; SALIX NIGRA POLLEN",
"StrengthNumber": ".1; .033; .033; .033; .033; .033; .033; .1; .1",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.",
"Description": "Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas."
},
{
"NDCCode": "71335-2856-1",
"PackageDescription": "1 TUBE in 1 CARTON (71335-2856-1) / 35.44 g in 1 TUBE",
"NDC11Code": "71335-2856-01",
"ProductNDC": "71335-2856",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine",
"NonProprietaryName": "Lidocaine",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212695",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LIDOCAINE",
"StrengthNumber": "50",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251111",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Ointment 5% is indicated for production of anesthesia of accessible mucous membranes of the oropharynx. It is also useful as an anesthetic lubricant for intubation and for the temporary relief of pain associated with minor burns, including sunburn, abrasions of the skin, and insect bites.",
"Description": "Lidocaine Ointment 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, and has the following structural formula. Composition of Lidocaine Ointment 5%: acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols."
},
{
"NDCCode": "66298-0427-1",
"PackageDescription": "24 BAG in 1 CARTON (66298-0427-1) / 100 mL in 1 BAG",
"NDC11Code": "66298-0427-01",
"ProductNDC": "66298-0427",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208619",
"LabelerName": "Hp Halden Pharma AS",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251212",
"SamplePackage": "N",
"Description": "Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port bag with an over wrap. The container closure is not made with natural rubber latex. 500 mg/100 mL: One 100 mL bag contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL bag contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL bag contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate."
},
{
"NDCCode": "66298-0447-1",
"PackageDescription": "24 BAG in 1 CARTON (66298-0447-1) / 100 mL in 1 BAG",
"NDC11Code": "66298-0447-01",
"ProductNDC": "66298-0447",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208619",
"LabelerName": "Hp Halden Pharma AS",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251212",
"SamplePackage": "N",
"Description": "Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port bag with an over wrap. The container closure is not made with natural rubber latex. 500 mg/100 mL: One 100 mL bag contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL bag contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL bag contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate."
},
{
"NDCCode": "66298-0467-1",
"PackageDescription": "24 BAG in 1 CARTON (66298-0467-1) / 100 mL in 1 BAG",
"NDC11Code": "66298-0467-01",
"ProductNDC": "66298-0467",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208619",
"LabelerName": "Hp Halden Pharma AS",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251212",
"SamplePackage": "N",
"Description": "Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port bag with an over wrap. The container closure is not made with natural rubber latex. 500 mg/100 mL: One 100 mL bag contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL bag contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL bag contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate."
},
{
"NDCCode": "66298-1060-4",
"PackageDescription": "50 mL in 1 BAG (66298-1060-4)",
"NDC11Code": "66298-1060-04",
"ProductNDC": "66298-1060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate",
"NonProprietaryName": "Magnesium Sulfate Heptahydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206485",
"LabelerName": "Fresenius Kabi Norge AS",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-30",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": "Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in pre-eclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate, USP heptahydrate is chemically designated MgSO 4 7H 2O, colorless crystals or white powder freely soluble in water. Water for injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "66298-1060-5",
"PackageDescription": "500 mL in 1 BAG (66298-1060-5)",
"NDC11Code": "66298-1060-05",
"ProductNDC": "66298-1060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate",
"NonProprietaryName": "Magnesium Sulfate Heptahydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206485",
"LabelerName": "Fresenius Kabi Norge AS",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-30",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": "Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in pre-eclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate, USP heptahydrate is chemically designated MgSO 4 7H 2O, colorless crystals or white powder freely soluble in water. Water for injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "66298-1060-6",
"PackageDescription": "1000 mL in 1 BAG (66298-1060-6)",
"NDC11Code": "66298-1060-06",
"ProductNDC": "66298-1060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate",
"NonProprietaryName": "Magnesium Sulfate Heptahydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206485",
"LabelerName": "Fresenius Kabi Norge AS",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-30",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": "Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in pre-eclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate, USP heptahydrate is chemically designated MgSO 4 7H 2O, colorless crystals or white powder freely soluble in water. Water for injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "66298-1070-5",
"PackageDescription": "50 mL in 1 BAG (66298-1070-5)",
"NDC11Code": "66298-1070-05",
"ProductNDC": "66298-1070",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate",
"NonProprietaryName": "Magnesium Sulfate Heptahydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206485",
"LabelerName": "Fresenius Kabi Norge AS",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-30",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": "Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in pre-eclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate, USP heptahydrate is chemically designated MgSO 4 7H 2O, colorless crystals or white powder freely soluble in water. Water for injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>66298-2856-3</NDCCode>
<PackageDescription>200 mL in 1 BAG (66298-2856-3) </PackageDescription>
<NDC11Code>66298-2856-03</NDC11Code>
<ProductNDC>66298-2856</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naropin</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20110531</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020533</ApplicationNumber>
<LabelerName>Fresenius Kabi Norge AS</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>66298-2856-1</NDCCode>
<PackageDescription>100 mL in 1 BAG (66298-2856-1) </PackageDescription>
<NDC11Code>66298-2856-01</NDC11Code>
<ProductNDC>66298-2856</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naropin</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20110531</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020533</ApplicationNumber>
<LabelerName>Fresenius Kabi Norge AS</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>66298-1060-3</NDCCode>
<PackageDescription>50 mL in 1 BAG (66298-1060-3)</PackageDescription>
<NDC11Code>66298-1060-03</NDC11Code>
<ProductNDC>66298-1060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206485</ApplicationNumber>
<LabelerName>Fresenius Kabi Norge AS</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-30</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in pre-eclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate, USP heptahydrate is chemically designated MgSO 4 7H 2O, colorless crystals or white powder freely soluble in water. Water for injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>66298-7131-3</NDCCode>
<PackageDescription>300 mL in 1 BAG (66298-7131-3) </PackageDescription>
<NDC11Code>66298-7131-03</NDC11Code>
<ProductNDC>66298-7131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linezolid</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204764</ApplicationNumber>
<LabelerName>Hp Halden Pharma AS</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Linezolid injection contains linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. Its structural formula is. C 16H 20FN 3O 4 M.W. 337.35. Linezolid injection is supplied as a ready-to-use sterile isotonic solution for intravenous infusion. Each mL contains 2 mg of linezolid. Inactive ingredients are sodium citrate, citric acid, and dextrose in an aqueous vehicle for intravenous administration. The sodium (Na +) content is 0.38 mg/mL (5 mEq per 300 mL flexible plastic container). pH adjusted to 4.8 with sodium hydroxide or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>36987-2856-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-2856-3)</PackageDescription>
<NDC11Code>36987-2856-03</NDC11Code>
<ProductNDC>36987-2856</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gambil Oak</ProprietaryName>
<NonProprietaryName>Gambil Oak</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>QUERCUS GAMBELII POLLEN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-2856-3</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-2856-3) </PackageDescription>
<NDC11Code>37662-2856-03</NDC11Code>
<ProductNDC>37662-2856</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Manganum Oxydatum Nigrum</ProprietaryName>
<NonProprietaryName>Manganum Oxydatum Nigrum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230328</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>MANGANESE DIOXIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-03-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>62991-2856-3</NDCCode>
<PackageDescription>100 g in 1 JAR (62991-2856-3)</PackageDescription>
<NDC11Code>62991-2856-03</NDC11Code>
<ProductNDC>62991-2856</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Levodopa</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20101028</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>LETCO MEDICAL, LLC</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>65044-2856-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL (65044-2856-3) </PackageDescription>
<NDC11Code>65044-2856-03</NDC11Code>
<ProductNDC>65044-2856</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Pollens - Trees, Tree Mix 5</ProprietaryName>
<NonProprietaryName>Tree Mix 5</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>CARYA ILLINOINENSIS POLLEN; ACER SACCHARUM POLLEN; ACER NEGUNDO POLLEN; ACER RUBRUM POLLEN; QUERCUS RUBRA POLLEN; QUERCUS VIRGINIANA POLLEN; QUERCUS ALBA POLLEN; PLATANUS OCCIDENTALIS POLLEN; SALIX NIGRA POLLEN</SubstanceName>
<StrengthNumber>.1; .033; .033; .033; .033; .033; .033; .1; .1</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.</IndicationAndUsage>
<Description>Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas.</Description>
</NDC>
<NDC>
<NDCCode>68071-2856-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (68071-2856-3) </PackageDescription>
<NDC11Code>68071-2856-03</NDC11Code>
<ProductNDC>68071-2856</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207510</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221024</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets, is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets, for use in patients for whom alternative treatment options [e.g., non-opioid analgesics] Have not been tolerated, or are not expected to be tolerated, Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone Hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg Inactive Ingredients. The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18H 21NO 4 · HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula:. Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8H 9NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>0228-2856-09</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (0228-2856-09) </PackageDescription>
<NDC11Code>00228-2856-09</NDC11Code>
<ProductNDC>0228-2856</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200910</StartMarketingDate>
<EndMarketingDate>20240531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091025</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200910</StartMarketingDatePackage>
<EndMarketingDatePackage>20240531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for: 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is - 1.35. Pregabalin capsules are administered orally and are supplied as imprinted, hard gelatin capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin USP, along with corn starch, mannitol, pregelatinized corn starch, talc as inactive ingredients. Each of the capsule shells contain gelatin, titanium dioxide. In addition, the 25 mg capsule shells also contain D&C Yellow #10, FD&C Yellow #6. The 50 mg capsule shells also contain D&C Yellow #10. The 75 mg capsule shells also contain D&C Yellow #10, red iron oxide, and yellow iron oxide. The 100 mg capsule shells also contain D&C Yellow #10 and yellow iron oxide. The 150 mg capsule shells also contain D&C Yellow #10, FD&C Yellow #6. The 200 mg capsule shells also contain D&C Yellow #10 and yellow iron oxide. The 225 mg capsule shells also contain D&C Yellow #10, red iron oxide and yellow iron oxide. The 300 mg capsule shells also contain D&C Yellow #10, FD&C Yellow #6 and yellow iron oxide. The capsules are imprinted with black Tek-Print ink SW-9008 and SW-9009 which contain black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>0703-2856-04</NDCCode>
<PackageDescription>25 VIAL, SINGLE-USE in 1 TRAY (0703-2856-04) > 20 mL in 1 VIAL, SINGLE-USE (0703-2856-01)</PackageDescription>
<NDC11Code>00703-2856-04</NDC11Code>
<ProductNDC>0703-2856</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propofol</ProprietaryName>
<NonProprietaryName>Propofol</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20070621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075102</ApplicationNumber>
<LabelerName>Teva Parenteral Medicines, Inc.</LabelerName>
<SubstanceName>PROPOFOL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE],General Anesthetic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-02-03</LastUpdate>
</NDC>
<NDC>
<NDCCode>36987-2856-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-2856-1)</PackageDescription>
<NDC11Code>36987-2856-01</NDC11Code>
<ProductNDC>36987-2856</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gambil Oak</ProprietaryName>
<NonProprietaryName>Gambil Oak</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>QUERCUS GAMBELII POLLEN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-2856-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-2856-2)</PackageDescription>
<NDC11Code>36987-2856-02</NDC11Code>
<ProductNDC>36987-2856</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gambil Oak</ProprietaryName>
<NonProprietaryName>Gambil Oak</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>QUERCUS GAMBELII POLLEN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-2856-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-2856-4)</PackageDescription>
<NDC11Code>36987-2856-04</NDC11Code>
<ProductNDC>36987-2856</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gambil Oak</ProprietaryName>
<NonProprietaryName>Gambil Oak</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>QUERCUS GAMBELII POLLEN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-2856-1</NDCCode>
<PackageDescription>80 PELLET in 1 VIAL, GLASS (37662-2856-1) </PackageDescription>
<NDC11Code>37662-2856-01</NDC11Code>
<ProductNDC>37662-2856</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Manganum Oxydatum Nigrum</ProprietaryName>
<NonProprietaryName>Manganum Oxydatum Nigrum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230328</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>MANGANESE DIOXIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-03-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-2856-2</NDCCode>
<PackageDescription>200 PELLET in 1 VIAL, GLASS (37662-2856-2) </PackageDescription>
<NDC11Code>37662-2856-02</NDC11Code>
<ProductNDC>37662-2856</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Manganum Oxydatum Nigrum</ProprietaryName>
<NonProprietaryName>Manganum Oxydatum Nigrum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230328</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>MANGANESE DIOXIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-03-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-2856-4</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (37662-2856-4) </PackageDescription>
<NDC11Code>37662-2856-04</NDC11Code>
<ProductNDC>37662-2856</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Manganum Oxydatum Nigrum</ProprietaryName>
<NonProprietaryName>Manganum Oxydatum Nigrum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230328</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>MANGANESE DIOXIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-03-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>62991-2856-1</NDCCode>
<PackageDescription>5 g in 1 JAR (62991-2856-1)</PackageDescription>
<NDC11Code>62991-2856-01</NDC11Code>
<ProductNDC>62991-2856</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Levodopa</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20101028</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>LETCO MEDICAL, LLC</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>62991-2856-2</NDCCode>
<PackageDescription>25 g in 1 JAR (62991-2856-2)</PackageDescription>
<NDC11Code>62991-2856-02</NDC11Code>
<ProductNDC>62991-2856</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Levodopa</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20101028</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>LETCO MEDICAL, LLC</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>62991-2856-4</NDCCode>
<PackageDescription>500 g in 1 JAR (62991-2856-4)</PackageDescription>
<NDC11Code>62991-2856-04</NDC11Code>
<ProductNDC>62991-2856</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Levodopa</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20101028</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>LETCO MEDICAL, LLC</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>65044-2856-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL (65044-2856-2) </PackageDescription>
<NDC11Code>65044-2856-02</NDC11Code>
<ProductNDC>65044-2856</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Pollens - Trees, Tree Mix 5</ProprietaryName>
<NonProprietaryName>Tree Mix 5</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>CARYA ILLINOINENSIS POLLEN; ACER SACCHARUM POLLEN; ACER NEGUNDO POLLEN; ACER RUBRUM POLLEN; QUERCUS RUBRA POLLEN; QUERCUS VIRGINIANA POLLEN; QUERCUS ALBA POLLEN; PLATANUS OCCIDENTALIS POLLEN; SALIX NIGRA POLLEN</SubstanceName>
<StrengthNumber>.1; .033; .033; .033; .033; .033; .033; .1; .1</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.</IndicationAndUsage>
<Description>Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas.</Description>
</NDC>
<NDC>
<NDCCode>65044-2856-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL (65044-2856-4) </PackageDescription>
<NDC11Code>65044-2856-04</NDC11Code>
<ProductNDC>65044-2856</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Pollens - Trees, Tree Mix 5</ProprietaryName>
<NonProprietaryName>Tree Mix 5</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>CARYA ILLINOINENSIS POLLEN; ACER SACCHARUM POLLEN; ACER NEGUNDO POLLEN; ACER RUBRUM POLLEN; QUERCUS RUBRA POLLEN; QUERCUS VIRGINIANA POLLEN; QUERCUS ALBA POLLEN; PLATANUS OCCIDENTALIS POLLEN; SALIX NIGRA POLLEN</SubstanceName>
<StrengthNumber>.1; .033; .033; .033; .033; .033; .033; .1; .1</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.</IndicationAndUsage>
<Description>Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas.</Description>
</NDC>
<NDC>
<NDCCode>71335-2856-1</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (71335-2856-1) / 35.44 g in 1 TUBE</PackageDescription>
<NDC11Code>71335-2856-01</NDC11Code>
<ProductNDC>71335-2856</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine</ProprietaryName>
<NonProprietaryName>Lidocaine</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212695</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LIDOCAINE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Ointment 5% is indicated for production of anesthesia of accessible mucous membranes of the oropharynx. It is also useful as an anesthetic lubricant for intubation and for the temporary relief of pain associated with minor burns, including sunburn, abrasions of the skin, and insect bites.</IndicationAndUsage>
<Description>Lidocaine Ointment 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, and has the following structural formula. Composition of Lidocaine Ointment 5%: acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols.</Description>
</NDC>
<NDC>
<NDCCode>66298-0427-1</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (66298-0427-1) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>66298-0427-01</NDC11Code>
<ProductNDC>66298-0427</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208619</ApplicationNumber>
<LabelerName>Hp Halden Pharma AS</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port bag with an over wrap. The container closure is not made with natural rubber latex. 500 mg/100 mL: One 100 mL bag contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL bag contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL bag contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate.</Description>
</NDC>
<NDC>
<NDCCode>66298-0447-1</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (66298-0447-1) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>66298-0447-01</NDC11Code>
<ProductNDC>66298-0447</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208619</ApplicationNumber>
<LabelerName>Hp Halden Pharma AS</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port bag with an over wrap. The container closure is not made with natural rubber latex. 500 mg/100 mL: One 100 mL bag contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL bag contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL bag contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate.</Description>
</NDC>
<NDC>
<NDCCode>66298-0467-1</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (66298-0467-1) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>66298-0467-01</NDC11Code>
<ProductNDC>66298-0467</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208619</ApplicationNumber>
<LabelerName>Hp Halden Pharma AS</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port bag with an over wrap. The container closure is not made with natural rubber latex. 500 mg/100 mL: One 100 mL bag contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL bag contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL bag contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate.</Description>
</NDC>
<NDC>
<NDCCode>66298-1060-4</NDCCode>
<PackageDescription>50 mL in 1 BAG (66298-1060-4)</PackageDescription>
<NDC11Code>66298-1060-04</NDC11Code>
<ProductNDC>66298-1060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206485</ApplicationNumber>
<LabelerName>Fresenius Kabi Norge AS</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-30</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in pre-eclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate, USP heptahydrate is chemically designated MgSO 4 7H 2O, colorless crystals or white powder freely soluble in water. Water for injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>66298-1060-5</NDCCode>
<PackageDescription>500 mL in 1 BAG (66298-1060-5)</PackageDescription>
<NDC11Code>66298-1060-05</NDC11Code>
<ProductNDC>66298-1060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206485</ApplicationNumber>
<LabelerName>Fresenius Kabi Norge AS</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-30</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in pre-eclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate, USP heptahydrate is chemically designated MgSO 4 7H 2O, colorless crystals or white powder freely soluble in water. Water for injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>66298-1060-6</NDCCode>
<PackageDescription>1000 mL in 1 BAG (66298-1060-6)</PackageDescription>
<NDC11Code>66298-1060-06</NDC11Code>
<ProductNDC>66298-1060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206485</ApplicationNumber>
<LabelerName>Fresenius Kabi Norge AS</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-30</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in pre-eclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate, USP heptahydrate is chemically designated MgSO 4 7H 2O, colorless crystals or white powder freely soluble in water. Water for injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>66298-1070-5</NDCCode>
<PackageDescription>50 mL in 1 BAG (66298-1070-5)</PackageDescription>
<NDC11Code>66298-1070-05</NDC11Code>
<ProductNDC>66298-1070</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206485</ApplicationNumber>
<LabelerName>Fresenius Kabi Norge AS</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-30</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in pre-eclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate, USP heptahydrate is chemically designated MgSO 4 7H 2O, colorless crystals or white powder freely soluble in water. Water for injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
</NDCList>