{
"NDC": [
{
"NDCCode": "66794-249-42",
"PackageDescription": "25 VIAL in 1 CARTON (66794-249-42) / 1 mL in 1 VIAL",
"NDC11Code": "66794-0249-42",
"ProductNDC": "66794-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorpromazine Hydrochloride",
"NonProprietaryName": "Chlorpromazine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216911",
"LabelerName": "Piramal Critical Care Inc.",
"SubstanceName": "CHLORPROMAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241201",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of schizophrenia; to control nausea and vomiting; for relief of restlessness and apprehension before surgery; for acute intermittent porphyria; as an adjunct in the treatment of tetanus; to control the manifestations of the manic type of manic-depressive illness; for relief of intractable hiccups; for the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance.",
"Description": "Chlorpromazine HCl USP is chemically designated as 2-chloro-10-[3-(dimethylamino)propyl]phenothiazine monohydrochloride and has the following structural formula. C 17H 19ClN 2S HCl MW 355.33. Chlorpromazine Hydrochloride Injection, USP is a sterile aqueous solution intended for deep intramuscular use. Each mL contains chlorpromazine hydrochloride USP 25 mg, ascorbic acid 2 mg, sodium metabisulfite 1 mg, sodium sulfite 1 mg and sodium chloride 6 mg in Water for Injection. pH is 3.4 to 5.4."
},
{
"NDCCode": "73069-249-42",
"PackageDescription": "3 VIAL, MULTI-DOSE in 1 BOX (73069-249-42) > 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "73069-0249-42",
"ProductNDC": "73069-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Viatrexx-infla",
"NonProprietaryName": "Aconitum, Anti-interleukin-1, Apis, Adrenal, Belladonna, Beta Endorphin, Citric Acid, Coelliac Plexus, Bryonia, Interleukin-10, Mesenchyme, Natrum Pyruvicum, Pineal, Pituitary Gland, Pyrogenium, Transforming Growth Factor-1, Transforming Growth Factor-3",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "VIATREXX BIO INCORPORATED",
"SubstanceName": "ANTI-INTERLEUKIN-1.ALPHA. IMMUNOGLOBULIN G RABBIT; ACONITUM NAPELLUS; APIS MELLIFERA; BETA-ENDORPHIN HUMAN; BOS TAURUS ADRENAL GLAND; SUS SCROFA ADRENAL GLAND; ATROPA BELLADONNA; CITRIC ACID MONOHYDRATE; BOS TAURUS SOLAR PLEXUS; SUS SCROFA SOLAR PLEXUS; BRYONIA ALBA ROOT; INTERLEUKIN-10; BOS TAURUS MESENCHYME; SUS SCROFA MESENCHYME; SODIUM PYRUVATE; BOS TAURUS PINEAL GLAND; SUS SCROFA PINEAL GLAND; BOS TAURUS PITUITARY GLAND; SUS SCROFA PITUITARY GLAND; RANCID BEEF; TRANSFORMING GROWTH FACTOR BETA-1; AVOTERMIN",
"StrengthNumber": "31; 201; 201; 201; 201; 201; 201; 31; 201; 201; 201; 201; 201; 201; 31; 31; 31; 201; 201; 201; 31; 31",
"StrengthUnit": "[kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL",
"Pharm_Classes": "Standardized Insect Venom Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Bee Venoms [CS],Acidifying Activity [MoA],Calculi Dissolution Agent [EPC],Anti-coagulant [EPC],Decreased Coagulation Factor Activity [PE],Calcium Chelating Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190505",
"SamplePackage": "N"
},
{
"NDCCode": "66794-202-42",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (66794-202-42) / 1 mL in 1 VIAL, GLASS (66794-202-02) ",
"NDC11Code": "66794-0202-42",
"ProductNDC": "66794-202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190711",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210842",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190711",
"SamplePackage": "N",
"Description": "Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log 10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate injection, USP, is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, Benzyl Alcohol, NF 0.9% (preservative) and hydrochloric acid as pH adjusters."
},
{
"NDCCode": "66794-203-42",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (66794-203-42) / 2 mL in 1 VIAL, GLASS (66794-203-02) ",
"NDC11Code": "66794-0203-42",
"ProductNDC": "66794-203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190711",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210842",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190711",
"SamplePackage": "N",
"Description": "Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log 10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate injection, USP, is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, Benzyl Alcohol, NF 0.9% (preservative) and hydrochloric acid as pH adjusters."
},
{
"NDCCode": "66794-204-42",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (66794-204-42) / 5 mL in 1 VIAL, GLASS (66794-204-02) ",
"NDC11Code": "66794-0204-42",
"ProductNDC": "66794-204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190711",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210842",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190711",
"SamplePackage": "N",
"Description": "Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log 10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate injection, USP, is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, Benzyl Alcohol, NF 0.9% (preservative) and hydrochloric acid as pH adjusters."
},
{
"NDCCode": "66794-211-42",
"PackageDescription": "25 VIAL in 1 CARTON (66794-211-42) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (66794-211-02) ",
"NDC11Code": "66794-0211-42",
"ProductNDC": "66794-211",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftriaxone",
"NonProprietaryName": "Ceftriaxone",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190808",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091049",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "CEFTRIAXONE SODIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190808",
"SamplePackage": "N",
"IndicationAndUsage": "Before instituting treatment with Ceftriaxone for Injection appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection and other antibacterial drugs, Ceftriaxone for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONS caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIA caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of ceftriaxone for injection compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for Injection and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONS caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,* Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species. URINARY TRACT INFECTIONS (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASE caused by Neisseria gonorrhoeae. Ceftriaxone sodium, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIA caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. BONE AND JOINT INFECTIONS caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. INTRA-ABDOMINAL INFECTIONS caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species . MENINGITIS caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli.*. *Efficacy for this organism in this organ system was studied in fewer than ten infections. SURGICAL PROPHYLAXIS. The preoperative administration of a single 1 gram dose of Ceftriaxone for Injection may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although Ceftriaxone for Injection has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 gram dose of Ceftriaxone for Injection provides protection from most infections due to susceptible organisms throughout the course of the procedure.",
"Description": "Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity."
},
{
"NDCCode": "66794-212-42",
"PackageDescription": "25 VIAL in 1 CARTON (66794-212-42) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (66794-212-02) ",
"NDC11Code": "66794-0212-42",
"ProductNDC": "66794-212",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftriaxone",
"NonProprietaryName": "Ceftriaxone",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190808",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091049",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "CEFTRIAXONE SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190808",
"SamplePackage": "N",
"IndicationAndUsage": "Before instituting treatment with Ceftriaxone for Injection appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection and other antibacterial drugs, Ceftriaxone for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONS caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIA caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of ceftriaxone for injection compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for Injection and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONS caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,* Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species. URINARY TRACT INFECTIONS (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASE caused by Neisseria gonorrhoeae. Ceftriaxone sodium, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIA caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. BONE AND JOINT INFECTIONS caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. INTRA-ABDOMINAL INFECTIONS caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species . MENINGITIS caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli.*. *Efficacy for this organism in this organ system was studied in fewer than ten infections. SURGICAL PROPHYLAXIS. The preoperative administration of a single 1 gram dose of Ceftriaxone for Injection may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although Ceftriaxone for Injection has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 gram dose of Ceftriaxone for Injection provides protection from most infections due to susceptible organisms throughout the course of the procedure.",
"Description": "Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity."
},
{
"NDCCode": "66794-213-42",
"PackageDescription": "25 VIAL in 1 CARTON (66794-213-42) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (66794-213-02) ",
"NDC11Code": "66794-0213-42",
"ProductNDC": "66794-213",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftriaxone",
"NonProprietaryName": "Ceftriaxone",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190808",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091049",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "CEFTRIAXONE SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190808",
"SamplePackage": "N",
"IndicationAndUsage": "Before instituting treatment with Ceftriaxone for Injection appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection and other antibacterial drugs, Ceftriaxone for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONS caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIA caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of ceftriaxone for injection compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for Injection and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONS caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,* Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species. URINARY TRACT INFECTIONS (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASE caused by Neisseria gonorrhoeae. Ceftriaxone sodium, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIA caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. BONE AND JOINT INFECTIONS caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. INTRA-ABDOMINAL INFECTIONS caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species . MENINGITIS caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli.*. *Efficacy for this organism in this organ system was studied in fewer than ten infections. SURGICAL PROPHYLAXIS. The preoperative administration of a single 1 gram dose of Ceftriaxone for Injection may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although Ceftriaxone for Injection has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 gram dose of Ceftriaxone for Injection provides protection from most infections due to susceptible organisms throughout the course of the procedure.",
"Description": "Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity."
},
{
"NDCCode": "66794-214-42",
"PackageDescription": "25 VIAL in 1 CARTON (66794-214-42) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (66794-214-02) ",
"NDC11Code": "66794-0214-42",
"ProductNDC": "66794-214",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftriaxone",
"NonProprietaryName": "Ceftriaxone",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190808",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091049",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "CEFTRIAXONE SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190808",
"SamplePackage": "N",
"IndicationAndUsage": "Before instituting treatment with Ceftriaxone for Injection appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection and other antibacterial drugs, Ceftriaxone for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONS caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIA caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of ceftriaxone for injection compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for Injection and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONS caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,* Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species. URINARY TRACT INFECTIONS (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASE caused by Neisseria gonorrhoeae. Ceftriaxone sodium, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIA caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. BONE AND JOINT INFECTIONS caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. INTRA-ABDOMINAL INFECTIONS caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species . MENINGITIS caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli.*. *Efficacy for this organism in this organ system was studied in fewer than ten infections. SURGICAL PROPHYLAXIS. The preoperative administration of a single 1 gram dose of Ceftriaxone for Injection may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although Ceftriaxone for Injection has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 gram dose of Ceftriaxone for Injection provides protection from most infections due to susceptible organisms throughout the course of the procedure.",
"Description": "Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity."
},
{
"NDCCode": "66794-230-42",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (66794-230-42) / 2 mL in 1 VIAL, GLASS (66794-230-02) ",
"NDC11Code": "66794-0230-42",
"ProductNDC": "66794-230",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine",
"NonProprietaryName": "Dexmedetomidine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202126",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "ug/2mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210119",
"SamplePackage": "N",
"Description": "Dexmedetomidine injection, USP (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Demedetomidine injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha 2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethyphenyl)ethylethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2 HCl and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "66794-232-42",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (66794-232-42) / 10 mL in 1 VIAL, MULTI-DOSE (66794-232-02) ",
"NDC11Code": "66794-0232-42",
"ProductNDC": "66794-232",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Succinylcholine Chloride",
"NonProprietaryName": "Succinylcholine Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214246",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "SUCCINYLCHOLINE CHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Depolarizing Neuromuscular Blocker [EPC], Neuromuscular Depolarizing Blockade [PE]",
"Status": "Active",
"LastUpdate": "2025-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210120",
"SamplePackage": "N",
"IndicationAndUsage": "Succinylcholine Chloride Injection is indicated in adults and pediatric patients. as an adjunct to general anesthesia. to facilitate tracheal intubation. to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14H 30Cl 2N 2O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula:. Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of Succinylcholine Chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.8 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.)."
},
{
"NDCCode": "66794-233-42",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (66794-233-42) / 2 mL in 1 VIAL, GLASS (66794-233-02) ",
"NDC11Code": "66794-0233-42",
"ProductNDC": "66794-233",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine",
"NonProprietaryName": "Dexmedetomidine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202126",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "ug/2mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210501",
"SamplePackage": "N",
"Description": "Dexmedetomidine injection, USP (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha 2 -adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine.Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-,monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2 HCl and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "66794-239-42",
"PackageDescription": "25 VIAL in 1 CARTON (66794-239-42) / 5 mL in 1 VIAL (66794-239-02) ",
"NDC11Code": "66794-0239-42",
"ProductNDC": "66794-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zinc Sulfate",
"NonProprietaryName": "Zinc Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220620",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216249",
"LabelerName": "Piramal Critical Care Inc.",
"SubstanceName": "ZINC SULFATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220620",
"SamplePackage": "N",
"IndicationAndUsage": "Zinc Sulfate Injection is indicated in adult and pediatric patients as a source of zinc for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "Zinc Sulfate Injection, USP is a sterile, non-pyrogenic, clear, colorless, and odorless solution intended for use as a trace element and an additive to intravenous solutions for parenteral nutrition. 30 mg/10 mL Pharmacy Bulk Package vial. Each mL contains 3 mg of zinc present as 7.41 mg of zinc sulfate and water for injection q.s. 25 mg/5 mL Pharmacy Bulk Package vial:. Each mL contains 5 mg of zinc present as 12.32 mg of zinc sulfate and water for injection q.s. All presentations do not contain preservatives. The pH range is 2 to 4; pH may be adjusted with sulfuric acid. 3 mg/mL of Zinc Sulfate Injection, USP contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 96.5 mOsmol/L. 5 mg/mL of Zinc Sulfate Injection, USP contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 157.2 mOsmol/L. Zinc sulfate heptahydrate, USP has a molecular weight of 287.6 g/mol and a formula of ZnSO 4·7H 2O."
},
{
"NDCCode": "66794-240-42",
"PackageDescription": "25 VIAL in 1 CARTON (66794-240-42) / 10 mL in 1 VIAL (66794-240-02) ",
"NDC11Code": "66794-0240-42",
"ProductNDC": "66794-240",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zinc Sulfate",
"NonProprietaryName": "Zinc Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220620",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216249",
"LabelerName": "Piramal Critical Care Inc.",
"SubstanceName": "ZINC SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220620",
"SamplePackage": "N",
"IndicationAndUsage": "Zinc Sulfate Injection is indicated in adult and pediatric patients as a source of zinc for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "Zinc Sulfate Injection, USP is a sterile, non-pyrogenic, clear, colorless, and odorless solution intended for use as a trace element and an additive to intravenous solutions for parenteral nutrition. 30 mg/10 mL Pharmacy Bulk Package vial. Each mL contains 3 mg of zinc present as 7.41 mg of zinc sulfate and water for injection q.s. 25 mg/5 mL Pharmacy Bulk Package vial:. Each mL contains 5 mg of zinc present as 12.32 mg of zinc sulfate and water for injection q.s. All presentations do not contain preservatives. The pH range is 2 to 4; pH may be adjusted with sulfuric acid. 3 mg/mL of Zinc Sulfate Injection, USP contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 96.5 mOsmol/L. 5 mg/mL of Zinc Sulfate Injection, USP contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 157.2 mOsmol/L. Zinc sulfate heptahydrate, USP has a molecular weight of 287.6 g/mol and a formula of ZnSO 4·7H 2O."
},
{
"NDCCode": "66794-250-42",
"PackageDescription": "25 VIAL in 1 CARTON (66794-250-42) / 2 mL in 1 VIAL",
"NDC11Code": "66794-0250-42",
"ProductNDC": "66794-250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorpromazine Hydrochloride",
"NonProprietaryName": "Chlorpromazine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216911",
"LabelerName": "Piramal Critical Care Inc.",
"SubstanceName": "CHLORPROMAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241201",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of schizophrenia; to control nausea and vomiting; for relief of restlessness and apprehension before surgery; for acute intermittent porphyria; as an adjunct in the treatment of tetanus; to control the manifestations of the manic type of manic-depressive illness; for relief of intractable hiccups; for the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance.",
"Description": "Chlorpromazine HCl USP is chemically designated as 2-chloro-10-[3-(dimethylamino)propyl]phenothiazine monohydrochloride and has the following structural formula. C 17H 19ClN 2S HCl MW 355.33. Chlorpromazine Hydrochloride Injection, USP is a sterile aqueous solution intended for deep intramuscular use. Each mL contains chlorpromazine hydrochloride USP 25 mg, ascorbic acid 2 mg, sodium metabisulfite 1 mg, sodium sulfite 1 mg and sodium chloride 6 mg in Water for Injection. pH is 3.4 to 5.4."
},
{
"NDCCode": "66794-255-42",
"PackageDescription": "25 VIAL in 1 CARTON (66794-255-42) / 10 mL in 1 VIAL (66794-255-02) ",
"NDC11Code": "66794-0255-42",
"ProductNDC": "66794-255",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zinc Sulfate",
"NonProprietaryName": "Zinc Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216249",
"LabelerName": "Piramal Critical Care Inc.",
"SubstanceName": "ZINC SULFATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Active",
"LastUpdate": "2024-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231130",
"SamplePackage": "N",
"IndicationAndUsage": "Zinc Sulfate Injection is indicated in adult and pediatric patients as a source of zinc for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "Zinc Sulfate Injection, USP is a sterile, non-pyrogenic, clear, colorless, and odorless solution intended for use as a trace element and an additive to intravenous solutions for parenteral nutrition. 10 mg/10 mL Pharmacy Bulk Package vial. Each mL contains 1 mg of zinc present as 2.46 mg of zinc sulfate and water for injection q.s. All presentations do not contain preservatives. The pH range is 2 to 4; pH may be adjusted with sulfuric acid. 1 mg/mL of Zinc Sulfate Injection, USP contains no more than 1,500 mcg/L of aluminum and has a calculated osmolarity of 33 mOsmol/L. Zinc sulfate heptahydrate, USP has a molecular weight of 287.6 g/mol and a formula of ZnSO 4·7H 2O."
},
{
"NDCCode": "66794-160-02",
"PackageDescription": "1 mL in 1 VIAL, SINGLE-USE (66794-160-02) ",
"NDC11Code": "66794-0160-02",
"ProductNDC": "66794-160",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mitigo",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INTRATHECAL",
"StartMarketingDate": "20190225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204393",
"LabelerName": "Piramal Critical Care, Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190225",
"SamplePackage": "N",
"IndicationAndUsage": "MITIGO ® is for use in continuous microinfusion devices and indicated only for intrathecal or epidural infusion in the management of intractable chronic pain severe enough to require an opioid analgesic and for which less invasive means of controlling pain are inadequate. Limitations of Use. Not for single-dose intravenous, intramuscular, or subcutaneous administration due to the risk of overdose. Not for single-dose neuraxial injection because MITIGO ® is too concentrated for accurate delivery of the smaller doses used in this setting.",
"Description": "MITIGO ® (morphine sulfate injection, USP – Preservative-free) is an opioid agonist, available as a sterile, nonpyrogenic, isobaric, high potency solution of morphine sulfate in strengths of 10 mg or 25 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives. MITIGO ® is intended for use in continuous microinfusion devices for intraspinal administration in the management of pain. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5- epoxy- 17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula:. (C 17H 19NO 3) 2 H 2SO 4 5H 2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of MITIGO ® 200 mg/20 mL contains morphine sulfate, USP 10 mg and sodium chloride 8 mg in Water for Injection, USP. Each mL of MITIGO ® 500 mg/20 mL contains morphine sulfate, USP 25 mg and sodium chloride 6.25 mg in Water for Injection, USP. If needed, sodium hydroxide and/or sulfuric acid are added for pH adjustment to 4.5. Contains no preservative. Each 20 mL vial of MITIGO ® is intended for SINGLE USE ONLY."
},
{
"NDCCode": "66794-162-02",
"PackageDescription": "1 mL in 1 VIAL, SINGLE-USE (66794-162-02) ",
"NDC11Code": "66794-0162-02",
"ProductNDC": "66794-162",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mitigo",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INTRATHECAL",
"StartMarketingDate": "20181015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204393",
"LabelerName": "Piramal Critical Care, Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181015",
"SamplePackage": "N",
"IndicationAndUsage": "MITIGO ® is for use in continuous microinfusion devices and indicated only for intrathecal or epidural infusion in the management of intractable chronic pain severe enough to require an opioid analgesic and for which less invasive means of controlling pain are inadequate. Limitations of Use. Not for single-dose intravenous, intramuscular, or subcutaneous administration due to the risk of overdose. Not for single-dose neuraxial injection because MITIGO ® is too concentrated for accurate delivery of the smaller doses used in this setting.",
"Description": "MITIGO ® (morphine sulfate injection, USP – Preservative-free) is an opioid agonist, available as a sterile, nonpyrogenic, isobaric, high potency solution of morphine sulfate in strengths of 10 mg or 25 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives. MITIGO ® is intended for use in continuous microinfusion devices for intraspinal administration in the management of pain. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5- epoxy- 17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula:. (C 17H 19NO 3) 2 H 2SO 4 5H 2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of MITIGO ® 200 mg/20 mL contains morphine sulfate, USP 10 mg and sodium chloride 8 mg in Water for Injection, USP. Each mL of MITIGO ® 500 mg/20 mL contains morphine sulfate, USP 25 mg and sodium chloride 6.25 mg in Water for Injection, USP. If needed, sodium hydroxide and/or sulfuric acid are added for pH adjustment to 4.5. Contains no preservative. Each 20 mL vial of MITIGO ® is intended for SINGLE USE ONLY."
},
{
"NDCCode": "49702-253-15",
"PackageDescription": "1 KIT in 1 CARTON (49702-253-15) * 2 mL in 1 VIAL (49702-245-01) * 2 mL in 1 VIAL (49702-249-02) ",
"NDC11Code": "49702-0253-15",
"ProductNDC": "49702-253",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cabenuva",
"NonProprietaryName": "Cabotegravir And Rilpivirine",
"DosageFormName": "KIT",
"StartMarketingDate": "20210121",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212888",
"LabelerName": "ViiV Healthcare Company",
"Status": "Active",
"LastUpdate": "2025-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210121",
"SamplePackage": "N",
"IndicationAndUsage": "CABENUVA is indicated as a complete regimen for the treatment of HIV-1 infection in adults and adolescents 12 years of age and older and weighing at least 35 kg to replace the current antiretroviral regimen in those who are virologically suppressed (HIV-1 RNA <50 copies/mL) on a stable antiretroviral regimen with no history of treatment failure and with no known or suspected resistance to either cabotegravir or rilpivirine [see Microbiology (12.4), Clinical Studies (14.1)].",
"Description": "CABENUVA contains cabotegravir extended-release injectable suspension, an HIV INSTI, co-packaged with rilpivirine extended-release injectable suspension, an HIV NNRTI. Cabotegravir. The chemical name for cabotegravir is (3S,11aR)-N-[(2,4-difluorophenyl)methyl]-6-hydroxy-3-methyl-5,7-dioxo-2,3,5,7,11,11a-hexahydro[1,3]oxazolo[3,2-a]pyrido[1,2-d]pyrazine-8-carboxamide. The empirical formula is C19H17F2N3O5 and the molecular weight is 405.35 g/mol. It has the following structural formula. Cabotegravir extended-release injectable suspension is a white to light pink free-flowing suspension for intramuscular injection in a sterile single-dose vial. Each vial contains 2 mL or 3 mL of the following: cabotegravir 200 mg/mL and the inactive ingredients mannitol (35 mg/mL), polyethylene glycol (PEG) 3350 (20 mg/mL), polysorbate 20 (20 mg/mL), and Water for Injection. The vial stoppers are not made with natural rubber latex. Rilpivirine. The chemical name for rilpivirine is 4-[[4-[[4-[(E)-2-cyanoethenyl]-2,6-dimethylphenyl]amino]-2-pyrimidinyl]amino]benzonitrile. Its molecular formula is C22H18N6 and its molecular weight is 366.42. Rilpivirine has the following structural formula. Rilpivirine extended-release injectable suspension is a white to off-white suspension for intramuscular injection. Each sterile single-dose vial contains 2 mL or 3 mL of the following: rilpivirine 300 mg/mL and the following inactive ingredients: citric acid monohydrate (1 mg/mL), dextrose to ensure isotonicity, monobasic sodium phosphate (1.74 mg/mL), poloxamer 338 (50 mg/mL), sodium hydroxide to adjust pH, and Water for Injection. The vial stoppers are not made with natural rubber latex."
},
{
"NDCCode": "65162-249-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (65162-249-03) ",
"NDC11Code": "65162-0249-03",
"ProductNDC": "65162-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alosetron Hydrochloride",
"NonProprietaryName": "Alosetron Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206647",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ALOSETRON HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170102",
"SamplePackage": "N",
"IndicationAndUsage": "Alosetron tablets are indicated only for women with severe diarrhea-predominant irritable bowel syndrome (IBS) who have: : 1 chronic IBS symptoms (generally lasting 6 months or longer), , 2 had anatomic or biochemical abnormalities of the gastrointestinal tract excluded, and , 3 not responded adequately to conventional therapy. .",
"Description": "The active ingredient in alosetron tablets, USP is alosetron hydrochloride (HCl) USP, a potent and selective antagonist of the serotonin 5-HT3 receptor type. Chemically, alosetron is designated as 2,3,4,5-tetrahydro-5-methyl-2-[(5-methyl-1H-imidazol-4-yl)methyl]-1H-pyrido[4,3-b]indol-1-one, monohydrochloride. Alosetron is achiral and has the empirical formula C17H18N4OHCl, representing a molecular weight of 330.8. Alosetron is a white to beige solid that has a solubility of 61 mg/mL in water, 42 mg/mL in 0.1M hydrochloric acid, 0.3 mg/mL in pH 6 phosphate buffer and <0.1 mg/mL in pH 8 phosphate buffer. The chemical structure of alosetron is. Alosetron tablets, USP are supplied for oral administration as 0.5 mg (white) and 1 mg (light blue) tablets. The 0.5 mg tablet contains 0.562 mg alosetron hydrochloride, USPequivalent to 0.5 mg alosetron and the 1 mg tablet contains 1.124 mg alosetron hydrochloride, USPequivalent to 1 mg of alosetron. Each tablet also contains the inactive ingredients lactose anhydrous, magnesium stearate, microcrystalline cellulose and pregelatinized starch (maize). The white film coat for the 0.5 mg tablet contains hypromellose, polyethylene glycol, polysorbate 80 and titanium dioxide. The light blue film coat for the 1 mg tablet contains FD&C blue #2, hypromellose, macrogol, polysorbate 80 and titanium dioxide."
},
{
"NDCCode": "65162-249-50",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (65162-249-50) ",
"NDC11Code": "65162-0249-50",
"ProductNDC": "65162-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alosetron Hydrochloride",
"NonProprietaryName": "Alosetron Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206647",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ALOSETRON HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170102",
"SamplePackage": "N",
"IndicationAndUsage": "Alosetron tablets are indicated only for women with severe diarrhea-predominant irritable bowel syndrome (IBS) who have: : 1 chronic IBS symptoms (generally lasting 6 months or longer), , 2 had anatomic or biochemical abnormalities of the gastrointestinal tract excluded, and , 3 not responded adequately to conventional therapy. .",
"Description": "The active ingredient in alosetron tablets, USP is alosetron hydrochloride (HCl) USP, a potent and selective antagonist of the serotonin 5-HT3 receptor type. Chemically, alosetron is designated as 2,3,4,5-tetrahydro-5-methyl-2-[(5-methyl-1H-imidazol-4-yl)methyl]-1H-pyrido[4,3-b]indol-1-one, monohydrochloride. Alosetron is achiral and has the empirical formula C17H18N4OHCl, representing a molecular weight of 330.8. Alosetron is a white to beige solid that has a solubility of 61 mg/mL in water, 42 mg/mL in 0.1M hydrochloric acid, 0.3 mg/mL in pH 6 phosphate buffer and <0.1 mg/mL in pH 8 phosphate buffer. The chemical structure of alosetron is. Alosetron tablets, USP are supplied for oral administration as 0.5 mg (white) and 1 mg (light blue) tablets. The 0.5 mg tablet contains 0.562 mg alosetron hydrochloride, USPequivalent to 0.5 mg alosetron and the 1 mg tablet contains 1.124 mg alosetron hydrochloride, USPequivalent to 1 mg of alosetron. Each tablet also contains the inactive ingredients lactose anhydrous, magnesium stearate, microcrystalline cellulose and pregelatinized starch (maize). The white film coat for the 0.5 mg tablet contains hypromellose, polyethylene glycol, polysorbate 80 and titanium dioxide. The light blue film coat for the 1 mg tablet contains FD&C blue #2, hypromellose, macrogol, polysorbate 80 and titanium dioxide."
},
{
"NDCCode": "68382-249-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (68382-249-01) ",
"NDC11Code": "68382-0249-01",
"ProductNDC": "68382-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181121",
"EndMarketingDate": "20260401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206536",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181121",
"EndMarketingDatePackage": "20260401",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.",
"Description": "Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc."
},
{
"NDCCode": "68382-249-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (68382-249-05) ",
"NDC11Code": "68382-0249-05",
"ProductNDC": "68382-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181121",
"EndMarketingDate": "20260401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206536",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181121",
"EndMarketingDatePackage": "20260401",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.",
"Description": "Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc."
},
{
"NDCCode": "68382-249-06",
"PackageDescription": "30 TABLET in 1 BOTTLE (68382-249-06) ",
"NDC11Code": "68382-0249-06",
"ProductNDC": "68382-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181121",
"EndMarketingDate": "20260401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206536",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181121",
"EndMarketingDatePackage": "20260401",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.",
"Description": "Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc."
},
{
"NDCCode": "68382-249-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (68382-249-10) ",
"NDC11Code": "68382-0249-10",
"ProductNDC": "68382-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181121",
"EndMarketingDate": "20260401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206536",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181121",
"EndMarketingDatePackage": "20260401",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.",
"Description": "Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc."
},
{
"NDCCode": "68382-249-16",
"PackageDescription": "90 TABLET in 1 BOTTLE (68382-249-16) ",
"NDC11Code": "68382-0249-16",
"ProductNDC": "68382-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181121",
"EndMarketingDate": "20260401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206536",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181121",
"EndMarketingDatePackage": "20260401",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.",
"Description": "Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc."
},
{
"NDCCode": "68382-249-77",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68382-249-77) / 10 TABLET in 1 BLISTER PACK (68382-249-30) ",
"NDC11Code": "68382-0249-77",
"ProductNDC": "68382-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181121",
"EndMarketingDate": "20260401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206536",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181121",
"EndMarketingDatePackage": "20260401",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.",
"Description": "Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc."
},
{
"NDCCode": "66794-010-25",
"PackageDescription": "250 mL in 1 BOTTLE, GLASS (66794-010-25)",
"NDC11Code": "66794-0010-25",
"ProductNDC": "66794-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enflurane",
"NonProprietaryName": "Enflurane",
"DosageFormName": "INHALANT",
"RouteName": "NASAL",
"StartMarketingDate": "20100323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074396",
"LabelerName": "Piramal Critical Care Inc.",
"SubstanceName": "ENFLURANE",
"StrengthNumber": "99.9",
"StrengthUnit": "mL/100mL",
"Pharm_Classes": "General Anesthesia [PE],General Anesthetic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2014-12-26"
},
{
"NDCCode": "66794-011-01",
"PackageDescription": "250000 mL in 1 DRUM (66794-011-01)",
"NDC11Code": "66794-0011-01",
"ProductNDC": "66794-011",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Isoflurane",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20140807",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "ISOFLURANE",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20211231"
},
{
"NDCCode": "66794-011-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (66794-011-10) ",
"NDC11Code": "66794-0011-10",
"ProductNDC": "66794-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Terrell",
"NonProprietaryName": "Isoflurane",
"DosageFormName": "LIQUID",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20100228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074416",
"LabelerName": "Piramal Critical Care, Inc.",
"SubstanceName": "ISOFLURANE",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100228",
"SamplePackage": "N",
"IndicationAndUsage": "Terrell (isoflurane, USP) may be used for induction and maintenance of general anesthesia. Adequate data have not been developed to establish its application in obstetrical anesthesia.",
"Description": "Terrell (isoflurane, USP), a nonflammable liquid administered by vaporizing, is a general inhalation anesthetic drug. It is 1-chloro-2,2,2-trifluoroethyl difluoromethyl ether, and its structural formula is. Some physical constants are. Isoflurane is a clear, colorless, stable liquid containing no additives or chemical stabilizers. Isoflurane has a mildly pungent, musty, ethereal odor. Samples stored in indirect sunlight in clear, colorless glass for five years, as well as samples directly exposed for 30 hours to a 2 amp, 115 volt, 60 cycle long wave U.V. light were unchanged in composition as determined by gas chromatography. Isoflurane in one normal sodium methoxide-methanol solution, a strong base, for over six months consumed essentially no alkali, indicative of strong base stability. Isoflurane does not decompose in the presence of soda lime (at normal operating temperatures), and does not attack aluminum, tin, brass, iron or copper."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>66794-249-42</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (66794-249-42) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>66794-0249-42</NDC11Code>
<ProductNDC>66794-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorpromazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Chlorpromazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216911</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc.</LabelerName>
<SubstanceName>CHLORPROMAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of schizophrenia; to control nausea and vomiting; for relief of restlessness and apprehension before surgery; for acute intermittent porphyria; as an adjunct in the treatment of tetanus; to control the manifestations of the manic type of manic-depressive illness; for relief of intractable hiccups; for the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance.</IndicationAndUsage>
<Description>Chlorpromazine HCl USP is chemically designated as 2-chloro-10-[3-(dimethylamino)propyl]phenothiazine monohydrochloride and has the following structural formula. C 17H 19ClN 2S HCl MW 355.33. Chlorpromazine Hydrochloride Injection, USP is a sterile aqueous solution intended for deep intramuscular use. Each mL contains chlorpromazine hydrochloride USP 25 mg, ascorbic acid 2 mg, sodium metabisulfite 1 mg, sodium sulfite 1 mg and sodium chloride 6 mg in Water for Injection. pH is 3.4 to 5.4.</Description>
</NDC>
<NDC>
<NDCCode>73069-249-42</NDCCode>
<PackageDescription>3 VIAL, MULTI-DOSE in 1 BOX (73069-249-42) > 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>73069-0249-42</NDC11Code>
<ProductNDC>73069-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Viatrexx-infla</ProprietaryName>
<NonProprietaryName>Aconitum, Anti-interleukin-1, Apis, Adrenal, Belladonna, Beta Endorphin, Citric Acid, Coelliac Plexus, Bryonia, Interleukin-10, Mesenchyme, Natrum Pyruvicum, Pineal, Pituitary Gland, Pyrogenium, Transforming Growth Factor-1, Transforming Growth Factor-3</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>VIATREXX BIO INCORPORATED</LabelerName>
<SubstanceName>ANTI-INTERLEUKIN-1.ALPHA. IMMUNOGLOBULIN G RABBIT; ACONITUM NAPELLUS; APIS MELLIFERA; BETA-ENDORPHIN HUMAN; BOS TAURUS ADRENAL GLAND; SUS SCROFA ADRENAL GLAND; ATROPA BELLADONNA; CITRIC ACID MONOHYDRATE; BOS TAURUS SOLAR PLEXUS; SUS SCROFA SOLAR PLEXUS; BRYONIA ALBA ROOT; INTERLEUKIN-10; BOS TAURUS MESENCHYME; SUS SCROFA MESENCHYME; SODIUM PYRUVATE; BOS TAURUS PINEAL GLAND; SUS SCROFA PINEAL GLAND; BOS TAURUS PITUITARY GLAND; SUS SCROFA PITUITARY GLAND; RANCID BEEF; TRANSFORMING GROWTH FACTOR BETA-1; AVOTERMIN</SubstanceName>
<StrengthNumber>31; 201; 201; 201; 201; 201; 201; 31; 201; 201; 201; 201; 201; 201; 31; 31; 31; 201; 201; 201; 31; 31</StrengthNumber>
<StrengthUnit>[kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL</StrengthUnit>
<Pharm_Classes>Standardized Insect Venom Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Bee Venoms [CS],Acidifying Activity [MoA],Calculi Dissolution Agent [EPC],Anti-coagulant [EPC],Decreased Coagulation Factor Activity [PE],Calcium Chelating Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>66794-202-42</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (66794-202-42) / 1 mL in 1 VIAL, GLASS (66794-202-02) </PackageDescription>
<NDC11Code>66794-0202-42</NDC11Code>
<ProductNDC>66794-202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190711</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210842</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log 10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate injection, USP, is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, Benzyl Alcohol, NF 0.9% (preservative) and hydrochloric acid as pH adjusters.</Description>
</NDC>
<NDC>
<NDCCode>66794-203-42</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (66794-203-42) / 2 mL in 1 VIAL, GLASS (66794-203-02) </PackageDescription>
<NDC11Code>66794-0203-42</NDC11Code>
<ProductNDC>66794-203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190711</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210842</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log 10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate injection, USP, is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, Benzyl Alcohol, NF 0.9% (preservative) and hydrochloric acid as pH adjusters.</Description>
</NDC>
<NDC>
<NDCCode>66794-204-42</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (66794-204-42) / 5 mL in 1 VIAL, GLASS (66794-204-02) </PackageDescription>
<NDC11Code>66794-0204-42</NDC11Code>
<ProductNDC>66794-204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190711</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210842</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log 10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate injection, USP, is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, Benzyl Alcohol, NF 0.9% (preservative) and hydrochloric acid as pH adjusters.</Description>
</NDC>
<NDC>
<NDCCode>66794-211-42</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (66794-211-42) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (66794-211-02) </PackageDescription>
<NDC11Code>66794-0211-42</NDC11Code>
<ProductNDC>66794-211</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftriaxone</ProprietaryName>
<NonProprietaryName>Ceftriaxone</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190808</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091049</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Before instituting treatment with Ceftriaxone for Injection appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection and other antibacterial drugs, Ceftriaxone for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONS caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIA caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of ceftriaxone for injection compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for Injection and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONS caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,* Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species. URINARY TRACT INFECTIONS (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASE caused by Neisseria gonorrhoeae. Ceftriaxone sodium, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIA caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. BONE AND JOINT INFECTIONS caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. INTRA-ABDOMINAL INFECTIONS caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species . MENINGITIS caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli.*. *Efficacy for this organism in this organ system was studied in fewer than ten infections. SURGICAL PROPHYLAXIS. The preoperative administration of a single 1 gram dose of Ceftriaxone for Injection may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although Ceftriaxone for Injection has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 gram dose of Ceftriaxone for Injection provides protection from most infections due to susceptible organisms throughout the course of the procedure.</IndicationAndUsage>
<Description>Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
</NDC>
<NDC>
<NDCCode>66794-212-42</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (66794-212-42) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (66794-212-02) </PackageDescription>
<NDC11Code>66794-0212-42</NDC11Code>
<ProductNDC>66794-212</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftriaxone</ProprietaryName>
<NonProprietaryName>Ceftriaxone</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190808</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091049</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Before instituting treatment with Ceftriaxone for Injection appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection and other antibacterial drugs, Ceftriaxone for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONS caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIA caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of ceftriaxone for injection compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for Injection and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONS caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,* Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species. URINARY TRACT INFECTIONS (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASE caused by Neisseria gonorrhoeae. Ceftriaxone sodium, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIA caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. BONE AND JOINT INFECTIONS caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. INTRA-ABDOMINAL INFECTIONS caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species . MENINGITIS caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli.*. *Efficacy for this organism in this organ system was studied in fewer than ten infections. SURGICAL PROPHYLAXIS. The preoperative administration of a single 1 gram dose of Ceftriaxone for Injection may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although Ceftriaxone for Injection has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 gram dose of Ceftriaxone for Injection provides protection from most infections due to susceptible organisms throughout the course of the procedure.</IndicationAndUsage>
<Description>Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
</NDC>
<NDC>
<NDCCode>66794-213-42</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (66794-213-42) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (66794-213-02) </PackageDescription>
<NDC11Code>66794-0213-42</NDC11Code>
<ProductNDC>66794-213</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftriaxone</ProprietaryName>
<NonProprietaryName>Ceftriaxone</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190808</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091049</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Before instituting treatment with Ceftriaxone for Injection appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection and other antibacterial drugs, Ceftriaxone for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONS caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIA caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of ceftriaxone for injection compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for Injection and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONS caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,* Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species. URINARY TRACT INFECTIONS (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASE caused by Neisseria gonorrhoeae. Ceftriaxone sodium, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIA caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. BONE AND JOINT INFECTIONS caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. INTRA-ABDOMINAL INFECTIONS caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species . MENINGITIS caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli.*. *Efficacy for this organism in this organ system was studied in fewer than ten infections. SURGICAL PROPHYLAXIS. The preoperative administration of a single 1 gram dose of Ceftriaxone for Injection may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although Ceftriaxone for Injection has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 gram dose of Ceftriaxone for Injection provides protection from most infections due to susceptible organisms throughout the course of the procedure.</IndicationAndUsage>
<Description>Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
</NDC>
<NDC>
<NDCCode>66794-214-42</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (66794-214-42) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (66794-214-02) </PackageDescription>
<NDC11Code>66794-0214-42</NDC11Code>
<ProductNDC>66794-214</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftriaxone</ProprietaryName>
<NonProprietaryName>Ceftriaxone</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190808</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091049</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Before instituting treatment with Ceftriaxone for Injection appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection and other antibacterial drugs, Ceftriaxone for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONS caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIA caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of ceftriaxone for injection compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for Injection and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONS caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,* Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species. URINARY TRACT INFECTIONS (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASE caused by Neisseria gonorrhoeae. Ceftriaxone sodium, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIA caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. BONE AND JOINT INFECTIONS caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. INTRA-ABDOMINAL INFECTIONS caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species . MENINGITIS caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli.*. *Efficacy for this organism in this organ system was studied in fewer than ten infections. SURGICAL PROPHYLAXIS. The preoperative administration of a single 1 gram dose of Ceftriaxone for Injection may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although Ceftriaxone for Injection has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 gram dose of Ceftriaxone for Injection provides protection from most infections due to susceptible organisms throughout the course of the procedure.</IndicationAndUsage>
<Description>Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R, 7R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
</NDC>
<NDC>
<NDCCode>66794-230-42</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (66794-230-42) / 2 mL in 1 VIAL, GLASS (66794-230-02) </PackageDescription>
<NDC11Code>66794-0230-42</NDC11Code>
<ProductNDC>66794-230</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine</ProprietaryName>
<NonProprietaryName>Dexmedetomidine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202126</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/2mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Dexmedetomidine injection, USP (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Demedetomidine injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha 2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethyphenyl)ethylethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2 HCl and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>66794-232-42</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (66794-232-42) / 10 mL in 1 VIAL, MULTI-DOSE (66794-232-02) </PackageDescription>
<NDC11Code>66794-0232-42</NDC11Code>
<ProductNDC>66794-232</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Succinylcholine Chloride</ProprietaryName>
<NonProprietaryName>Succinylcholine Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214246</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>SUCCINYLCHOLINE CHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Depolarizing Neuromuscular Blocker [EPC], Neuromuscular Depolarizing Blockade [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Succinylcholine Chloride Injection is indicated in adults and pediatric patients. as an adjunct to general anesthesia. to facilitate tracheal intubation. to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14H 30Cl 2N 2O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula:. Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of Succinylcholine Chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.8 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.).</Description>
</NDC>
<NDC>
<NDCCode>66794-233-42</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (66794-233-42) / 2 mL in 1 VIAL, GLASS (66794-233-02) </PackageDescription>
<NDC11Code>66794-0233-42</NDC11Code>
<ProductNDC>66794-233</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine</ProprietaryName>
<NonProprietaryName>Dexmedetomidine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202126</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/2mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Dexmedetomidine injection, USP (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha 2 -adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine.Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-,monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2 HCl and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>66794-239-42</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (66794-239-42) / 5 mL in 1 VIAL (66794-239-02) </PackageDescription>
<NDC11Code>66794-0239-42</NDC11Code>
<ProductNDC>66794-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zinc Sulfate</ProprietaryName>
<NonProprietaryName>Zinc Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220620</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216249</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc.</LabelerName>
<SubstanceName>ZINC SULFATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Zinc Sulfate Injection is indicated in adult and pediatric patients as a source of zinc for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>Zinc Sulfate Injection, USP is a sterile, non-pyrogenic, clear, colorless, and odorless solution intended for use as a trace element and an additive to intravenous solutions for parenteral nutrition. 30 mg/10 mL Pharmacy Bulk Package vial. Each mL contains 3 mg of zinc present as 7.41 mg of zinc sulfate and water for injection q.s. 25 mg/5 mL Pharmacy Bulk Package vial:. Each mL contains 5 mg of zinc present as 12.32 mg of zinc sulfate and water for injection q.s. All presentations do not contain preservatives. The pH range is 2 to 4; pH may be adjusted with sulfuric acid. 3 mg/mL of Zinc Sulfate Injection, USP contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 96.5 mOsmol/L. 5 mg/mL of Zinc Sulfate Injection, USP contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 157.2 mOsmol/L. Zinc sulfate heptahydrate, USP has a molecular weight of 287.6 g/mol and a formula of ZnSO 4·7H 2O.</Description>
</NDC>
<NDC>
<NDCCode>66794-240-42</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (66794-240-42) / 10 mL in 1 VIAL (66794-240-02) </PackageDescription>
<NDC11Code>66794-0240-42</NDC11Code>
<ProductNDC>66794-240</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zinc Sulfate</ProprietaryName>
<NonProprietaryName>Zinc Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220620</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216249</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc.</LabelerName>
<SubstanceName>ZINC SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Zinc Sulfate Injection is indicated in adult and pediatric patients as a source of zinc for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>Zinc Sulfate Injection, USP is a sterile, non-pyrogenic, clear, colorless, and odorless solution intended for use as a trace element and an additive to intravenous solutions for parenteral nutrition. 30 mg/10 mL Pharmacy Bulk Package vial. Each mL contains 3 mg of zinc present as 7.41 mg of zinc sulfate and water for injection q.s. 25 mg/5 mL Pharmacy Bulk Package vial:. Each mL contains 5 mg of zinc present as 12.32 mg of zinc sulfate and water for injection q.s. All presentations do not contain preservatives. The pH range is 2 to 4; pH may be adjusted with sulfuric acid. 3 mg/mL of Zinc Sulfate Injection, USP contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 96.5 mOsmol/L. 5 mg/mL of Zinc Sulfate Injection, USP contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 157.2 mOsmol/L. Zinc sulfate heptahydrate, USP has a molecular weight of 287.6 g/mol and a formula of ZnSO 4·7H 2O.</Description>
</NDC>
<NDC>
<NDCCode>66794-250-42</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (66794-250-42) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>66794-0250-42</NDC11Code>
<ProductNDC>66794-250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorpromazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Chlorpromazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216911</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc.</LabelerName>
<SubstanceName>CHLORPROMAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of schizophrenia; to control nausea and vomiting; for relief of restlessness and apprehension before surgery; for acute intermittent porphyria; as an adjunct in the treatment of tetanus; to control the manifestations of the manic type of manic-depressive illness; for relief of intractable hiccups; for the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance.</IndicationAndUsage>
<Description>Chlorpromazine HCl USP is chemically designated as 2-chloro-10-[3-(dimethylamino)propyl]phenothiazine monohydrochloride and has the following structural formula. C 17H 19ClN 2S HCl MW 355.33. Chlorpromazine Hydrochloride Injection, USP is a sterile aqueous solution intended for deep intramuscular use. Each mL contains chlorpromazine hydrochloride USP 25 mg, ascorbic acid 2 mg, sodium metabisulfite 1 mg, sodium sulfite 1 mg and sodium chloride 6 mg in Water for Injection. pH is 3.4 to 5.4.</Description>
</NDC>
<NDC>
<NDCCode>66794-255-42</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (66794-255-42) / 10 mL in 1 VIAL (66794-255-02) </PackageDescription>
<NDC11Code>66794-0255-42</NDC11Code>
<ProductNDC>66794-255</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zinc Sulfate</ProprietaryName>
<NonProprietaryName>Zinc Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216249</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc.</LabelerName>
<SubstanceName>ZINC SULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Zinc Sulfate Injection is indicated in adult and pediatric patients as a source of zinc for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>Zinc Sulfate Injection, USP is a sterile, non-pyrogenic, clear, colorless, and odorless solution intended for use as a trace element and an additive to intravenous solutions for parenteral nutrition. 10 mg/10 mL Pharmacy Bulk Package vial. Each mL contains 1 mg of zinc present as 2.46 mg of zinc sulfate and water for injection q.s. All presentations do not contain preservatives. The pH range is 2 to 4; pH may be adjusted with sulfuric acid. 1 mg/mL of Zinc Sulfate Injection, USP contains no more than 1,500 mcg/L of aluminum and has a calculated osmolarity of 33 mOsmol/L. Zinc sulfate heptahydrate, USP has a molecular weight of 287.6 g/mol and a formula of ZnSO 4·7H 2O.</Description>
</NDC>
<NDC>
<NDCCode>66794-160-02</NDCCode>
<PackageDescription>1 mL in 1 VIAL, SINGLE-USE (66794-160-02) </PackageDescription>
<NDC11Code>66794-0160-02</NDC11Code>
<ProductNDC>66794-160</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mitigo</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INTRATHECAL</RouteName>
<StartMarketingDate>20190225</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204393</ApplicationNumber>
<LabelerName>Piramal Critical Care, Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190225</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MITIGO ® is for use in continuous microinfusion devices and indicated only for intrathecal or epidural infusion in the management of intractable chronic pain severe enough to require an opioid analgesic and for which less invasive means of controlling pain are inadequate. Limitations of Use. Not for single-dose intravenous, intramuscular, or subcutaneous administration due to the risk of overdose. Not for single-dose neuraxial injection because MITIGO ® is too concentrated for accurate delivery of the smaller doses used in this setting.</IndicationAndUsage>
<Description>MITIGO ® (morphine sulfate injection, USP – Preservative-free) is an opioid agonist, available as a sterile, nonpyrogenic, isobaric, high potency solution of morphine sulfate in strengths of 10 mg or 25 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives. MITIGO ® is intended for use in continuous microinfusion devices for intraspinal administration in the management of pain. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5- epoxy- 17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula:. (C 17H 19NO 3) 2 H 2SO 4 5H 2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of MITIGO ® 200 mg/20 mL contains morphine sulfate, USP 10 mg and sodium chloride 8 mg in Water for Injection, USP. Each mL of MITIGO ® 500 mg/20 mL contains morphine sulfate, USP 25 mg and sodium chloride 6.25 mg in Water for Injection, USP. If needed, sodium hydroxide and/or sulfuric acid are added for pH adjustment to 4.5. Contains no preservative. Each 20 mL vial of MITIGO ® is intended for SINGLE USE ONLY.</Description>
</NDC>
<NDC>
<NDCCode>66794-162-02</NDCCode>
<PackageDescription>1 mL in 1 VIAL, SINGLE-USE (66794-162-02) </PackageDescription>
<NDC11Code>66794-0162-02</NDC11Code>
<ProductNDC>66794-162</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mitigo</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INTRATHECAL</RouteName>
<StartMarketingDate>20181015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204393</ApplicationNumber>
<LabelerName>Piramal Critical Care, Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MITIGO ® is for use in continuous microinfusion devices and indicated only for intrathecal or epidural infusion in the management of intractable chronic pain severe enough to require an opioid analgesic and for which less invasive means of controlling pain are inadequate. Limitations of Use. Not for single-dose intravenous, intramuscular, or subcutaneous administration due to the risk of overdose. Not for single-dose neuraxial injection because MITIGO ® is too concentrated for accurate delivery of the smaller doses used in this setting.</IndicationAndUsage>
<Description>MITIGO ® (morphine sulfate injection, USP – Preservative-free) is an opioid agonist, available as a sterile, nonpyrogenic, isobaric, high potency solution of morphine sulfate in strengths of 10 mg or 25 mg morphine sulfate per mL, free of antioxidants, preservatives or other potentially neurotoxic additives. MITIGO ® is intended for use in continuous microinfusion devices for intraspinal administration in the management of pain. Morphine is the most important alkaloid of opium and is a phenanthrene derivative. It is available as the sulfate salt, chemically identified as 7,8-Didehydro-4,5- epoxy- 17-methyl-(5α,6α)-morphinan-3,6-diol sulfate (2:1) (salt), pentahydrate, with the following structural formula:. (C 17H 19NO 3) 2 H 2SO 4 5H 2O Molecular Weight is 758.83. Morphine sulfate USP is an odorless, white crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each mL of MITIGO ® 200 mg/20 mL contains morphine sulfate, USP 10 mg and sodium chloride 8 mg in Water for Injection, USP. Each mL of MITIGO ® 500 mg/20 mL contains morphine sulfate, USP 25 mg and sodium chloride 6.25 mg in Water for Injection, USP. If needed, sodium hydroxide and/or sulfuric acid are added for pH adjustment to 4.5. Contains no preservative. Each 20 mL vial of MITIGO ® is intended for SINGLE USE ONLY.</Description>
</NDC>
<NDC>
<NDCCode>49702-253-15</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (49702-253-15) * 2 mL in 1 VIAL (49702-245-01) * 2 mL in 1 VIAL (49702-249-02) </PackageDescription>
<NDC11Code>49702-0253-15</NDC11Code>
<ProductNDC>49702-253</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cabenuva</ProprietaryName>
<NonProprietaryName>Cabotegravir And Rilpivirine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20210121</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212888</ApplicationNumber>
<LabelerName>ViiV Healthcare Company</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CABENUVA is indicated as a complete regimen for the treatment of HIV-1 infection in adults and adolescents 12 years of age and older and weighing at least 35 kg to replace the current antiretroviral regimen in those who are virologically suppressed (HIV-1 RNA <50 copies/mL) on a stable antiretroviral regimen with no history of treatment failure and with no known or suspected resistance to either cabotegravir or rilpivirine [see Microbiology (12.4), Clinical Studies (14.1)].</IndicationAndUsage>
<Description>CABENUVA contains cabotegravir extended-release injectable suspension, an HIV INSTI, co-packaged with rilpivirine extended-release injectable suspension, an HIV NNRTI. Cabotegravir. The chemical name for cabotegravir is (3S,11aR)-N-[(2,4-difluorophenyl)methyl]-6-hydroxy-3-methyl-5,7-dioxo-2,3,5,7,11,11a-hexahydro[1,3]oxazolo[3,2-a]pyrido[1,2-d]pyrazine-8-carboxamide. The empirical formula is C19H17F2N3O5 and the molecular weight is 405.35 g/mol. It has the following structural formula. Cabotegravir extended-release injectable suspension is a white to light pink free-flowing suspension for intramuscular injection in a sterile single-dose vial. Each vial contains 2 mL or 3 mL of the following: cabotegravir 200 mg/mL and the inactive ingredients mannitol (35 mg/mL), polyethylene glycol (PEG) 3350 (20 mg/mL), polysorbate 20 (20 mg/mL), and Water for Injection. The vial stoppers are not made with natural rubber latex. Rilpivirine. The chemical name for rilpivirine is 4-[[4-[[4-[(E)-2-cyanoethenyl]-2,6-dimethylphenyl]amino]-2-pyrimidinyl]amino]benzonitrile. Its molecular formula is C22H18N6 and its molecular weight is 366.42. Rilpivirine has the following structural formula. Rilpivirine extended-release injectable suspension is a white to off-white suspension for intramuscular injection. Each sterile single-dose vial contains 2 mL or 3 mL of the following: rilpivirine 300 mg/mL and the following inactive ingredients: citric acid monohydrate (1 mg/mL), dextrose to ensure isotonicity, monobasic sodium phosphate (1.74 mg/mL), poloxamer 338 (50 mg/mL), sodium hydroxide to adjust pH, and Water for Injection. The vial stoppers are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>65162-249-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (65162-249-03) </PackageDescription>
<NDC11Code>65162-0249-03</NDC11Code>
<ProductNDC>65162-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alosetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Alosetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206647</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ALOSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alosetron tablets are indicated only for women with severe diarrhea-predominant irritable bowel syndrome (IBS) who have: : 1 chronic IBS symptoms (generally lasting 6 months or longer), , 2 had anatomic or biochemical abnormalities of the gastrointestinal tract excluded, and , 3 not responded adequately to conventional therapy. .</IndicationAndUsage>
<Description>The active ingredient in alosetron tablets, USP is alosetron hydrochloride (HCl) USP, a potent and selective antagonist of the serotonin 5-HT3 receptor type. Chemically, alosetron is designated as 2,3,4,5-tetrahydro-5-methyl-2-[(5-methyl-1H-imidazol-4-yl)methyl]-1H-pyrido[4,3-b]indol-1-one, monohydrochloride. Alosetron is achiral and has the empirical formula C17H18N4OHCl, representing a molecular weight of 330.8. Alosetron is a white to beige solid that has a solubility of 61 mg/mL in water, 42 mg/mL in 0.1M hydrochloric acid, 0.3 mg/mL in pH 6 phosphate buffer and <0.1 mg/mL in pH 8 phosphate buffer. The chemical structure of alosetron is. Alosetron tablets, USP are supplied for oral administration as 0.5 mg (white) and 1 mg (light blue) tablets. The 0.5 mg tablet contains 0.562 mg alosetron hydrochloride, USPequivalent to 0.5 mg alosetron and the 1 mg tablet contains 1.124 mg alosetron hydrochloride, USPequivalent to 1 mg of alosetron. Each tablet also contains the inactive ingredients lactose anhydrous, magnesium stearate, microcrystalline cellulose and pregelatinized starch (maize). The white film coat for the 0.5 mg tablet contains hypromellose, polyethylene glycol, polysorbate 80 and titanium dioxide. The light blue film coat for the 1 mg tablet contains FD&C blue #2, hypromellose, macrogol, polysorbate 80 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>65162-249-50</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (65162-249-50) </PackageDescription>
<NDC11Code>65162-0249-50</NDC11Code>
<ProductNDC>65162-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alosetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Alosetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206647</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ALOSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alosetron tablets are indicated only for women with severe diarrhea-predominant irritable bowel syndrome (IBS) who have: : 1 chronic IBS symptoms (generally lasting 6 months or longer), , 2 had anatomic or biochemical abnormalities of the gastrointestinal tract excluded, and , 3 not responded adequately to conventional therapy. .</IndicationAndUsage>
<Description>The active ingredient in alosetron tablets, USP is alosetron hydrochloride (HCl) USP, a potent and selective antagonist of the serotonin 5-HT3 receptor type. Chemically, alosetron is designated as 2,3,4,5-tetrahydro-5-methyl-2-[(5-methyl-1H-imidazol-4-yl)methyl]-1H-pyrido[4,3-b]indol-1-one, monohydrochloride. Alosetron is achiral and has the empirical formula C17H18N4OHCl, representing a molecular weight of 330.8. Alosetron is a white to beige solid that has a solubility of 61 mg/mL in water, 42 mg/mL in 0.1M hydrochloric acid, 0.3 mg/mL in pH 6 phosphate buffer and <0.1 mg/mL in pH 8 phosphate buffer. The chemical structure of alosetron is. Alosetron tablets, USP are supplied for oral administration as 0.5 mg (white) and 1 mg (light blue) tablets. The 0.5 mg tablet contains 0.562 mg alosetron hydrochloride, USPequivalent to 0.5 mg alosetron and the 1 mg tablet contains 1.124 mg alosetron hydrochloride, USPequivalent to 1 mg of alosetron. Each tablet also contains the inactive ingredients lactose anhydrous, magnesium stearate, microcrystalline cellulose and pregelatinized starch (maize). The white film coat for the 0.5 mg tablet contains hypromellose, polyethylene glycol, polysorbate 80 and titanium dioxide. The light blue film coat for the 1 mg tablet contains FD&C blue #2, hypromellose, macrogol, polysorbate 80 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68382-249-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (68382-249-01) </PackageDescription>
<NDC11Code>68382-0249-01</NDC11Code>
<ProductNDC>68382-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181121</StartMarketingDate>
<EndMarketingDate>20260401</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206536</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181121</StartMarketingDatePackage>
<EndMarketingDatePackage>20260401</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-249-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (68382-249-05) </PackageDescription>
<NDC11Code>68382-0249-05</NDC11Code>
<ProductNDC>68382-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181121</StartMarketingDate>
<EndMarketingDate>20260401</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206536</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181121</StartMarketingDatePackage>
<EndMarketingDatePackage>20260401</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-249-06</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (68382-249-06) </PackageDescription>
<NDC11Code>68382-0249-06</NDC11Code>
<ProductNDC>68382-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181121</StartMarketingDate>
<EndMarketingDate>20260401</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206536</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181121</StartMarketingDatePackage>
<EndMarketingDatePackage>20260401</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-249-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (68382-249-10) </PackageDescription>
<NDC11Code>68382-0249-10</NDC11Code>
<ProductNDC>68382-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181121</StartMarketingDate>
<EndMarketingDate>20260401</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206536</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181121</StartMarketingDatePackage>
<EndMarketingDatePackage>20260401</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-249-16</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68382-249-16) </PackageDescription>
<NDC11Code>68382-0249-16</NDC11Code>
<ProductNDC>68382-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181121</StartMarketingDate>
<EndMarketingDate>20260401</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206536</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181121</StartMarketingDatePackage>
<EndMarketingDatePackage>20260401</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-249-77</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68382-249-77) / 10 TABLET in 1 BLISTER PACK (68382-249-30) </PackageDescription>
<NDC11Code>68382-0249-77</NDC11Code>
<ProductNDC>68382-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181121</StartMarketingDate>
<EndMarketingDate>20260401</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206536</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181121</StartMarketingDatePackage>
<EndMarketingDatePackage>20260401</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemiaHypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin calcium (atorvastatin) is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in alcohol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and talc.</Description>
</NDC>
<NDC>
<NDCCode>66794-010-25</NDCCode>
<PackageDescription>250 mL in 1 BOTTLE, GLASS (66794-010-25)</PackageDescription>
<NDC11Code>66794-0010-25</NDC11Code>
<ProductNDC>66794-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enflurane</ProprietaryName>
<NonProprietaryName>Enflurane</NonProprietaryName>
<DosageFormName>INHALANT</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20100323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074396</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc.</LabelerName>
<SubstanceName>ENFLURANE</SubstanceName>
<StrengthNumber>99.9</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE],General Anesthetic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-12-26</LastUpdate>
</NDC>
<NDC>
<NDCCode>66794-011-01</NDCCode>
<PackageDescription>250000 mL in 1 DRUM (66794-011-01)</PackageDescription>
<NDC11Code>66794-0011-01</NDC11Code>
<ProductNDC>66794-011</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Isoflurane</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20140807</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>ISOFLURANE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>66794-011-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (66794-011-10) </PackageDescription>
<NDC11Code>66794-0011-10</NDC11Code>
<ProductNDC>66794-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Terrell</ProprietaryName>
<NonProprietaryName>Isoflurane</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20100228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074416</ApplicationNumber>
<LabelerName>Piramal Critical Care, Inc.</LabelerName>
<SubstanceName>ISOFLURANE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Terrell (isoflurane, USP) may be used for induction and maintenance of general anesthesia. Adequate data have not been developed to establish its application in obstetrical anesthesia.</IndicationAndUsage>
<Description>Terrell (isoflurane, USP), a nonflammable liquid administered by vaporizing, is a general inhalation anesthetic drug. It is 1-chloro-2,2,2-trifluoroethyl difluoromethyl ether, and its structural formula is. Some physical constants are. Isoflurane is a clear, colorless, stable liquid containing no additives or chemical stabilizers. Isoflurane has a mildly pungent, musty, ethereal odor. Samples stored in indirect sunlight in clear, colorless glass for five years, as well as samples directly exposed for 30 hours to a 2 amp, 115 volt, 60 cycle long wave U.V. light were unchanged in composition as determined by gas chromatography. Isoflurane in one normal sodium methoxide-methanol solution, a strong base, for over six months consumed essentially no alkali, indicative of strong base stability. Isoflurane does not decompose in the presence of soda lime (at normal operating temperatures), and does not attack aluminum, tin, brass, iron or copper.</Description>
</NDC>
</NDCList>