{
"NDC": [
{
"NDCCode": "66993-790-97",
"PackageDescription": "1 INHALER in 1 CARTON (66993-790-97) / 60 POWDER, METERED in 1 INHALER",
"NDC11Code": "66993-0790-97",
"ProductNDC": "66993-790",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate",
"DosageFormName": "POWDER, METERED",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20231030",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020833",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE PROPIONATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231030",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Propionate DISKUS is indicated for the maintenance treatment of asthma as prophylactic therapy in patients aged 4 years and older. Important Limitation of Use. Fluticasone Propionate DISKUS is NOT indicated for the relief of acute bronchospasm.",
"Description": "Fluticasone Propionate DISKUS inhalation powder is a dry powder inhaler for oral inhalation. The active component of Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. Fluticasone Propionate DISKUS is an orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (50, 100, or 250 mcg) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate DISKUS delivers 46, 94, and 229 mcg of fluticasone propionate from Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). In children with asthma aged 4 and 8 years, mean PIF through Fluticasone Propionate DISKUS was 70 and 104 L/min, respectively (range: 48 to 123 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "12634-790-97",
"PackageDescription": "7 TABLET in 1 BOTTLE (12634-790-97)",
"NDC11Code": "12634-0790-97",
"ProductNDC": "12634-790",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glipizide",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074550",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"IndicationAndUsage": "Glipizide Tablets, USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Glipizide is an oral blood-glucose-lowering drug of the sulfonylurea class. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazine-carboxamido)ethyl]phenyl]sulfonyl]urea. The molecular formula is C 21H 27N 5O 4S; the molecular weight is 445.55; the structural formula is shown below:. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet, for oral administration, contains 5 mg or 10 mg glipizide. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, corn starch, silicon dioxide, stearic acid. Glipizide Tablets, USP 5 mg and 10 mg meet USP Dissolution Test 2."
},
{
"NDCCode": "66993-134-97",
"PackageDescription": "1 TRAY in 1 CARTON (66993-134-97) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
"NDC11Code": "66993-0134-97",
"ProductNDC": "66993-134",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Umeclidinium And Vilanterol Ellipta",
"NonProprietaryName": "Umeclidinium Bromide And Vilanterol Trifenatate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20250411",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA203975",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "UMECLIDINIUM BROMIDE; VILANTEROL TRIFENATATE",
"StrengthNumber": "62.5; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250411",
"SamplePackage": "N",
"IndicationAndUsage": "Umeclidinium and Vilanterol ELLIPTA is indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). Limitations of Use. Umeclidinium and Vilanterol ELLIPTA is NOT indicated for the relief of acute bronchospasm or for the treatment of asthma. The safety and effectiveness of Umeclidinium and Vilanterol ELLIPTA in asthma have not been established.",
"Description": "Umeclidinium and Vilanterol ELLIPTA is an inhalation powder drug product for delivery of a combination of umeclidinium (an anticholinergic) and vilanterol (a LABA) to patients by oral inhalation. Umeclidinium bromide has the chemical name 1-[2-(benzyloxy)ethyl]-4-(hydroxydiphenylmethyl)-1-azoniabicyclo[2.2.2]octane bromide and the following chemical structure. Umeclidinium bromide is a white powder with a molecular weight of 508.5, and the empirical formula is C29H34NO2Br (as a quaternary ammonium bromide compound). It is slightly soluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[(2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. Umeclidinium and Vilanterol ELLIPTA is a light grey and red plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized umeclidinium bromide (74.2 mcg equivalent to 62.5 mcg of umeclidinium), magnesium stearate (75 mcg), and lactose monohydrate (to 12.5 mg), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (to 12.5 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Umeclidinium and Vilanterol ELLIPTA delivers 55 mcg of umeclidinium and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-135-97",
"PackageDescription": "1 TRAY in 1 CARTON (66993-135-97) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
"NDC11Code": "66993-0135-97",
"ProductNDC": "66993-135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Furoate And Vilanterol",
"NonProprietaryName": "Fluticasone Furoate And Vilanterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220523",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA204275",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
"StrengthNumber": "100; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220523",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Furoate/Vilanterol ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long‑acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
"Description": "Fluticasone Furoate/Vilanterol ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. Fluticasone furoate/vilanterol ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100 or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone furoate/vilanterol ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-136-97",
"PackageDescription": "1 TRAY in 1 CARTON (66993-136-97) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
"NDC11Code": "66993-0136-97",
"ProductNDC": "66993-136",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Furoate And Vilanterol",
"NonProprietaryName": "Fluticasone Furoate And Vilanterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220523",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA204275",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
"StrengthNumber": "200; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220523",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Furoate/Vilanterol ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long‑acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
"Description": "Fluticasone Furoate/Vilanterol ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. Fluticasone furoate/vilanterol ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100 or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone furoate/vilanterol ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-166-97",
"PackageDescription": "1 INHALER in 1 CARTON (66993-166-97) / 30 POWDER in 1 INHALER",
"NDC11Code": "66993-0166-97",
"ProductNDC": "66993-166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Furoate Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20250721",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205625",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250721",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Furoate ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. Fluticasone Furoate ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "Fluticasone Furoate ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Fluticasone Furoate ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Furoate ELLIPTA 50 mcg, Fluticasone Furoate ELLIPTA 100 mcg, and Fluticasone Furoate ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-167-97",
"PackageDescription": "1 INHALER in 1 CARTON (66993-167-97) / 30 POWDER in 1 INHALER",
"NDC11Code": "66993-0167-97",
"ProductNDC": "66993-167",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Furoate Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20250721",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205625",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "100",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250721",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Furoate ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. Fluticasone Furoate ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "Fluticasone Furoate ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Fluticasone Furoate ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Furoate ELLIPTA 50 mcg, Fluticasone Furoate ELLIPTA 100 mcg, and Fluticasone Furoate ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-168-97",
"PackageDescription": "1 INHALER in 1 CARTON (66993-168-97) / 30 POWDER in 1 INHALER",
"NDC11Code": "66993-0168-97",
"ProductNDC": "66993-168",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Furoate Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20250721",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205625",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "200",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250721",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Furoate ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. Fluticasone Furoate ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "Fluticasone Furoate ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Fluticasone Furoate ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Furoate ELLIPTA 50 mcg, Fluticasone Furoate ELLIPTA 100 mcg, and Fluticasone Furoate ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-189-97",
"PackageDescription": "1 TRAY in 1 CARTON (66993-189-97) / 1 INHALER in 1 TRAY / 30 AEROSOL, POWDER in 1 INHALER",
"NDC11Code": "66993-0189-97",
"ProductNDC": "66993-189",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Umeclidinium Ellipta",
"NonProprietaryName": "Umeclidinium",
"DosageFormName": "AEROSOL, POWDER",
"RouteName": "ORAL",
"StartMarketingDate": "20260406",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205382",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "UMECLIDINIUM BROMIDE",
"StrengthNumber": "62.5",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260406",
"SamplePackage": "N",
"IndicationAndUsage": "Umeclidinium ELLIPTA is indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD).",
"Description": "Umeclidinium ELLIPTA is an inhalation powder drug product for delivery of umeclidinium (an anticholinergic) to patients by oral inhalation. Umeclidinium bromide has the chemical name 1-[2-(benzyloxy)ethyl]-4-(hydroxydiphenylmethyl)-1-azoniabicyclo[2.2.2]octane bromide and the following chemical structure. Umeclidinium bromide is a white powder with a molecular weight of 508.5, and the empirical formula is C29H34NO2Br (as a quaternary ammonium bromide compound). It is slightly soluble in water. Umeclidinium ELLIPTA is a light grey and light green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized umeclidinium bromide (74.2 mcg equivalent to 62.5 mcg of umeclidinium), magnesium stearate (75 mcg), and lactose monohydrate (to 12.5 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Umeclidinium ELLIPTA delivers 55 mcg of umeclidinium per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (COPD with forced expiratory volume in 1 second/forced vital capacity [FEV1/FVC] <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 67.5 L/min (range: 41.6 to 83.3 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-584-97",
"PackageDescription": "1 INHALER in 1 CARTON (66993-584-97) / 60 POWDER in 1 INHALER",
"NDC11Code": "66993-0584-97",
"ProductNDC": "66993-584",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20190208",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021077",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "100; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190208",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Propionate/Salmeterol DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Fluticasone Propionate/Salmeterol DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Fluticasone Propionate/Salmeterol DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone Propionate/Salmeterol DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate/Salmeterol DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-585-97",
"PackageDescription": "1 INHALER in 1 CARTON (66993-585-97) / 60 POWDER in 1 INHALER",
"NDC11Code": "66993-0585-97",
"ProductNDC": "66993-585",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20190208",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021077",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "250; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190208",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Propionate/Salmeterol DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Fluticasone Propionate/Salmeterol DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Fluticasone Propionate/Salmeterol DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone Propionate/Salmeterol DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate/Salmeterol DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-586-97",
"PackageDescription": "1 INHALER in 1 CARTON (66993-586-97) / 60 POWDER in 1 INHALER",
"NDC11Code": "66993-0586-97",
"ProductNDC": "66993-586",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20190208",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021077",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "500; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190208",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Propionate/Salmeterol DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Fluticasone Propionate/Salmeterol DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Fluticasone Propionate/Salmeterol DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone Propionate/Salmeterol DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate/Salmeterol DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-791-97",
"PackageDescription": "1 INHALER in 1 CARTON (66993-791-97) / 60 POWDER, METERED in 1 INHALER",
"NDC11Code": "66993-0791-97",
"ProductNDC": "66993-791",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate",
"DosageFormName": "POWDER, METERED",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20231030",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020833",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE PROPIONATE",
"StrengthNumber": "100",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231030",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Propionate DISKUS is indicated for the maintenance treatment of asthma as prophylactic therapy in patients aged 4 years and older. Important Limitation of Use. Fluticasone Propionate DISKUS is NOT indicated for the relief of acute bronchospasm.",
"Description": "Fluticasone Propionate DISKUS inhalation powder is a dry powder inhaler for oral inhalation. The active component of Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. Fluticasone Propionate DISKUS is an orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (50, 100, or 250 mcg) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate DISKUS delivers 46, 94, and 229 mcg of fluticasone propionate from Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). In children with asthma aged 4 and 8 years, mean PIF through Fluticasone Propionate DISKUS was 70 and 104 L/min, respectively (range: 48 to 123 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-792-97",
"PackageDescription": "1 INHALER in 1 CARTON (66993-792-97) / 60 POWDER, METERED in 1 INHALER",
"NDC11Code": "66993-0792-97",
"ProductNDC": "66993-792",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate",
"DosageFormName": "POWDER, METERED",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20231030",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020833",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "FLUTICASONE PROPIONATE",
"StrengthNumber": "250",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231030",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone Propionate DISKUS is indicated for the maintenance treatment of asthma as prophylactic therapy in patients aged 4 years and older. Important Limitation of Use. Fluticasone Propionate DISKUS is NOT indicated for the relief of acute bronchospasm.",
"Description": "Fluticasone Propionate DISKUS inhalation powder is a dry powder inhaler for oral inhalation. The active component of Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. Fluticasone Propionate DISKUS is an orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (50, 100, or 250 mcg) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate DISKUS delivers 46, 94, and 229 mcg of fluticasone propionate from Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). In children with asthma aged 4 and 8 years, mean PIF through Fluticasone Propionate DISKUS was 70 and 104 L/min, respectively (range: 48 to 123 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "66993-959-31",
"PackageDescription": "1 TUBE in 1 CARTON (66993-959-31) / 30 g in 1 TUBE",
"NDC11Code": "66993-0959-31",
"ProductNDC": "66993-959",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Phosphate And Tretinion",
"NonProprietaryName": "Clindamycin Phosphate And Tretinoin",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180628",
"EndMarketingDate": "20251031",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA050803",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; TRETINOIN",
"StrengthNumber": "10; .25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE], Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180628",
"EndMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin Phosphate and Tretinoin Gel, 1.2%/0.025% is indicated for the topical treatment of acne vulgaris in patients 12 years and older.",
"Description": "Clindamycin Phosphate and Tretinoin Gel, 1.2%/0.025%, is a fixed combination of 2 solubilized active ingredients in an aqueous-based gel. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Molecular Formula: C18H34ClN2O8PS. Molecular Weight: 504.97. The chemical name for tretinoin is all-trans 3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid family of compounds. The structural formula for tretinoin is represented below. Molecular Formula: C20H28O2. Molecular Weight: 300.44. Clindamycin Phosphate and Tretinoin Gel contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, carbomer homopolymer (type C), edetate disodium, laureth 4, methylparaben, propylene glycol, purified water, and tromethamine."
},
{
"NDCCode": "66993-959-61",
"PackageDescription": "1 TUBE in 1 CARTON (66993-959-61) / 60 g in 1 TUBE",
"NDC11Code": "66993-0959-61",
"ProductNDC": "66993-959",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Phosphate And Tretinion",
"NonProprietaryName": "Clindamycin Phosphate And Tretinoin",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180628",
"EndMarketingDate": "20251031",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA050803",
"LabelerName": "Prasco Laboratories",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; TRETINOIN",
"StrengthNumber": "10; .25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE], Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180628",
"EndMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin Phosphate and Tretinoin Gel, 1.2%/0.025% is indicated for the topical treatment of acne vulgaris in patients 12 years and older.",
"Description": "Clindamycin Phosphate and Tretinoin Gel, 1.2%/0.025%, is a fixed combination of 2 solubilized active ingredients in an aqueous-based gel. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Molecular Formula: C18H34ClN2O8PS. Molecular Weight: 504.97. The chemical name for tretinoin is all-trans 3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid family of compounds. The structural formula for tretinoin is represented below. Molecular Formula: C20H28O2. Molecular Weight: 300.44. Clindamycin Phosphate and Tretinoin Gel contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, carbomer homopolymer (type C), edetate disodium, laureth 4, methylparaben, propylene glycol, purified water, and tromethamine."
},
{
"NDCCode": "0006-3083-01",
"PackageDescription": "1 VIAL in 1 CARTON (0006-3083-01) / 2.4 mL in 1 VIAL (0006-3083-99) ",
"NDC11Code": "00006-3083-01",
"ProductNDC": "0006-3083",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Keytruda Qlex",
"NonProprietaryName": "Pembrolizumab And Berahyaluronidase Alfa-pmph",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20250919",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761467",
"LabelerName": "Merck Sharp & Dohme LLC",
"SubstanceName": "PEMBROLIZUMAB; BERAHYALURONIDASE ALFA",
"StrengthNumber": "165; 2000",
"StrengthUnit": "mg/mL; U/mL",
"Pharm_Classes": "Endoglycosidase [EPC], Glycoside Hydrolases [CS], Programmed Death Receptor-1 Blocking Antibody [EPC], Programmed Death Receptor-1-directed Antibody Interactions [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250919",
"SamplePackage": "N",
"IndicationAndUsage": "KEYTRUDA QLEX is a combination of pembrolizumab, a programmed death receptor-1 (PD-1)-blocking antibody, and berahyaluronidase alfa, an endoglycosidase, indicated:. Melanoma: 1 for the treatment of adult patients with unresectable or metastatic melanoma. (1.1), 2 for the adjuvant treatment of adult and pediatric patients 12 years and older with Stage IIB, IIC, or III melanoma following complete resection. (1.1).",
"Description": "KEYTRUDA QLEX is a fixed-combination drug product containing pembrolizumab and berahyaluronidase alfa. Pembrolizumab is a programmed death receptor-1 (PD 1)-blocking antibody. Pembrolizumab is a humanized monoclonal IgG4 kappa antibody with an approximate molecular weight of 149 kDa. Pembrolizumab is produced in recombinant Chinese hamster ovary (CHO) cells. Berahyaluronidase alfa is an endoglycosidase used to enhance dispersion and permeation, which facilitates delivery of increased volume of pembrolizumab that is co-administered subcutaneously. It is produced by mammalian CHO (Chinese Hamster Ovary) cells containing a DNA plasmid encoding a variant of human hyaluronidase PH20. It is a glycosylated protein with an approximate molecular weight of 49 kDa under nonreducing, deglycosylated conditions. KEYTRUDA QLEX (pembrolizumab and berahyaluronidase alfa-pmph) injection is a sterile, preservative-free, clear to slightly opalescent, colorless to slightly yellow solution supplied in single-dose vials for subcutaneous administration. KEYTRUDA QLEX is supplied as two different configurations: : 1 Each KEYTRUDA QLEX 2.4 mL single-dose vial contains 395 mg of pembrolizumab and 4,800 units of berahyaluronidase alfa, and histidine (0.7 mg), histidine hydrochloride monohydrate (4.1 mg), methionine (3.6 mg), polysorbate 80 (0.5 mg), sucrose (168 mg), and Water for Injection, USP. The pH is 5.3-5.9. , 2 Each KEYTRUDA QLEX 4.8 mL single-dose vial contains 790 mg of pembrolizumab and 9,600 units of berahyaluronidase alfa, and histidine (1.4 mg), histidine hydrochloride monohydrate (8.2 mg), methionine (7.2 mg), polysorbate 80 (1 mg), sucrose (336 mg), and Water for Injection, USP. The pH is 5.3-5.9."
},
{
"NDCCode": "0006-5083-01",
"PackageDescription": "1 VIAL in 1 CARTON (0006-5083-01) / 4.8 mL in 1 VIAL (0006-5083-99) ",
"NDC11Code": "00006-5083-01",
"ProductNDC": "0006-5083",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Keytruda Qlex",
"NonProprietaryName": "Pembrolizumab And Berahyaluronidase Alfa-pmph",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20250919",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761467",
"LabelerName": "Merck Sharp & Dohme LLC",
"SubstanceName": "PEMBROLIZUMAB; BERAHYALURONIDASE ALFA",
"StrengthNumber": "165; 2000",
"StrengthUnit": "mg/mL; U/mL",
"Pharm_Classes": "Endoglycosidase [EPC], Glycoside Hydrolases [CS], Programmed Death Receptor-1 Blocking Antibody [EPC], Programmed Death Receptor-1-directed Antibody Interactions [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250919",
"SamplePackage": "N",
"IndicationAndUsage": "KEYTRUDA QLEX is a combination of pembrolizumab, a programmed death receptor-1 (PD-1)-blocking antibody, and berahyaluronidase alfa, an endoglycosidase, indicated:. Melanoma: 1 for the treatment of adult patients with unresectable or metastatic melanoma. (1.1), 2 for the adjuvant treatment of adult and pediatric patients 12 years and older with Stage IIB, IIC, or III melanoma following complete resection. (1.1).",
"Description": "KEYTRUDA QLEX is a fixed-combination drug product containing pembrolizumab and berahyaluronidase alfa. Pembrolizumab is a programmed death receptor-1 (PD 1)-blocking antibody. Pembrolizumab is a humanized monoclonal IgG4 kappa antibody with an approximate molecular weight of 149 kDa. Pembrolizumab is produced in recombinant Chinese hamster ovary (CHO) cells. Berahyaluronidase alfa is an endoglycosidase used to enhance dispersion and permeation, which facilitates delivery of increased volume of pembrolizumab that is co-administered subcutaneously. It is produced by mammalian CHO (Chinese Hamster Ovary) cells containing a DNA plasmid encoding a variant of human hyaluronidase PH20. It is a glycosylated protein with an approximate molecular weight of 49 kDa under nonreducing, deglycosylated conditions. KEYTRUDA QLEX (pembrolizumab and berahyaluronidase alfa-pmph) injection is a sterile, preservative-free, clear to slightly opalescent, colorless to slightly yellow solution supplied in single-dose vials for subcutaneous administration. KEYTRUDA QLEX is supplied as two different configurations: : 1 Each KEYTRUDA QLEX 2.4 mL single-dose vial contains 395 mg of pembrolizumab and 4,800 units of berahyaluronidase alfa, and histidine (0.7 mg), histidine hydrochloride monohydrate (4.1 mg), methionine (3.6 mg), polysorbate 80 (0.5 mg), sucrose (168 mg), and Water for Injection, USP. The pH is 5.3-5.9. , 2 Each KEYTRUDA QLEX 4.8 mL single-dose vial contains 790 mg of pembrolizumab and 9,600 units of berahyaluronidase alfa, and histidine (1.4 mg), histidine hydrochloride monohydrate (8.2 mg), methionine (7.2 mg), polysorbate 80 (1 mg), sucrose (336 mg), and Water for Injection, USP. The pH is 5.3-5.9."
},
{
"NDCCode": "0143-9772-26",
"PackageDescription": "100 mL in 1 BAG (0143-9772-26)",
"NDC11Code": "00143-9772-26",
"ProductNDC": "0143-9772",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20090804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078084",
"LabelerName": "West-ward Pharmaceutical Corp",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC],Nitroimidazoles [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Metronidazole Injection, USP is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with Metronidazole Injection, USP therapy. In a mixed aerobic and anaerobic infection, antibiotics appropriate for the treatment of the aerobic infection should be used in addition to Metronidazole Injection, USP. Metronidazole Injection, USP is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. Intra-Abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus), Clostridium species, Eubacterium species, Peptococcus species and Peptostreptococcus species. Skin and Skin Structure Infections caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species. Gynecologic Infections, including endometritis, endomyometritis, tubo-ovarian abscess and postsurgical vaginal cuff infection, caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptostreptococcus species and Fusobacterium species. Bacterial Septicemia caused by Bacteroides species including the B. fragilis group and Clostridium species. Bone and Joint Infections, as adjunctive therapy, caused by Bacteroides species including the B. fragilis group. Central Nervous System (CNS) Infections, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group. Lower Respiratory Tract Infections, including pneumonia, empyema and lung abscess, caused by Bacteroides species including the B. fragilis group. Endocarditis caused by Bacteroides species including the B. fragilis group.",
"Description": "Metronidazole Injection, USP, is a parenteral dosage form of the synthetic antibacterial agent 1-(ß-hydroxyethyl)-2-methyl-5- nitroimidazole. Metronidazole Injection, USP, in 100 mL single dose plastic container, is a sterile, nonpyrogenic, iso-osmotic, buffered solution of 500 mg Metronidazole, USP, 790 mg Sodium Chloride, USP, 47.6 mg Anhydrous Disodium Hydrogen Phosphate, USP and 22.9 mg Citric Acid Monohydrate, USP. Metronidazole Injection, USP has an osmolarity of 310 mOsmol/L (calc) and a pH of 5.5 (4.5 to 7.0). Each container contains 14 mEq of sodium. The plastic container is fabricated from a specially formulated polyvinyl chloride plastic. Water can permeate from inside the container into the overwrap in amounts insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "0338-1055-48",
"PackageDescription": "24 BAG in 1 CARTON (0338-1055-48) / 100 mL in 1 BAG",
"NDC11Code": "00338-1055-48",
"ProductNDC": "0338-1055",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19811224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018657",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19811224",
"SamplePackage": "N",
"IndicationAndUsage": "Metronidazole Injection is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with Metronidazole Injection therapy. In a mixed aerobic and anaerobic infection, antibacterial drugs appropriate for the treatment of the aerobic infection should be used in addition to Metronidazole Injection. Metronidazole Injection is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. : 1 Intra-Abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus), Clostridium species, Eubacterium species, Peptococcus species and Peptostreptococcus species in adults and pediatric patients less than 4 months of age., 2 Skin and Skin Structure Infections caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species in adults., 3 Gynecologic Infections, including endometritis, endomyometritis, tubo-ovarian abscess and postsurgical vaginal cuff infection, caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species in adults., 4 Bacterial Septicemia caused by Bacteroides species including the B. fragilis group and Clostridium species in adults., 5 Bone and Joint Infections, as adjunctive therapy, caused by Bacteroides species including the B. fragilis group in adults., 6 Central Nervous System (CNS) Infections, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group in adults. , 7 Lower Respiratory Tract Infections, including pneumonia, empyema and lung abscess, caused by Bacteroides species including the B. fragilis group in adults., 8 Endocarditis caused by Bacteroides species including the B. fragilis group in adults.",
"Description": "Metronidazole Injection, USP, is a parenteral formulation of the synthetic nitroimidazole antibacterial agent 2-methyl-5-nitro-1H-imidazole-1-ethanol. Metronidazole Injection, USP, in 100 mL VIAFLEX Plus single dose plastic container, is a sterile, nonpyrogenic, iso-osmotic, buffered solution of 500 mg Metronidazole, USP, 790 mg Sodium Chloride, USP, 47.6 mg Dibasic Sodium Phosphate Dried, USP and 22.9 mg Citric Acid Anhydrous, USP. Metronidazole Injection, USP has an osmolarity of 310 mOsmol/L (calc) and a pH of 5.5 (4.5 to 7.0). Each container contains 14 mEq of sodium. The plastic container is fabricated from a specially formulated polyvinyl chloride plastic. Water can permeate from inside the container into the overwrap in amounts insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-9541-24",
"PackageDescription": "24 BAG in 1 CARTON (0338-9541-24) / 100 mL in 1 BAG",
"NDC11Code": "00338-9541-24",
"ProductNDC": "0338-9541",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19811224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018657",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19811224",
"SamplePackage": "N",
"IndicationAndUsage": "Metronidazole Injection is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with Metronidazole Injection therapy. In a mixed aerobic and anaerobic infection, antibacterial drugs appropriate for the treatment of the aerobic infection should be used in addition to Metronidazole Injection. Metronidazole Injection is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. : 1 Intra-Abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus), Clostridium species, Eubacterium species, Peptococcus species and Peptostreptococcus species in adults and pediatric patients less than 4 months of age. , 2 Skin and Skin Structure Infections caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species in adults. , 3 Gynecologic Infections, including endometritis, endomyometritis, tubo-ovarian abscess and postsurgical vaginal cuff infection, caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species in adults. , 4 Bacterial Septicemia caused by Bacteroides species including the B. fragilis group and Clostridium species in adults. , 5 Bone and Joint Infections, as adjunctive therapy, caused by Bacteroides species including the B. fragilis group in adults. , 6 Central Nervous System (CNS) Infections, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group in adults. , 7 Lower Respiratory Tract Infections, including pneumonia, empyema and lung abscess, caused by Bacteroides species including the B. fragilis group in adults., 8 Endocarditis caused by Bacteroides species including the B. fragilis group in adults.",
"Description": "Metronidazole Injection, USP, is a parenteral formulation of the synthetic nitroimidazole antibacterial agent 2-methyl-5-nitro-1H-imidazole-1-ethanol. Metronidazole Injection, USP, in 100 mL VIAFLEX Plus single dose plastic container, is a sterile, nonpyrogenic, iso-osmotic, buffered solution of 500 mg Metronidazole, USP, 790 mg Sodium Chloride, USP, 47.6 mg Dibasic Sodium Phosphate Dried, USP and 22.9 mg Citric Acid Anhydrous, USP. Metronidazole Injection, USP has an osmolarity of 310 mOsmol/L (calc) and a pH of 5.5 (4.5 to 7.0). Each container contains 14 mEq of sodium. The plastic container is fabricated from a specially formulated polyvinyl chloride plastic. Water can permeate from inside the container into the overwrap in amounts insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0409-7811-24",
"PackageDescription": "24 POUCH in 1 CASE (0409-7811-24) / 1 BAG in 1 POUCH / 100 mL in 1 BAG (0409-7811-31) ",
"NDC11Code": "00409-7811-24",
"ProductNDC": "0409-7811",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050907",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018890",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20050907",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment of Anaerobic Infections. Metronidazole Injection, USP is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with metronidazole therapy. In a mixed aerobic and anaerobic infection, antibiotics appropriate for the treatment of the aerobic infection should be used in addition to metronidazole. Metronidazole is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. Intra-abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus). Clostridium species, Eubacterium species, Peptococcus species, and Peptostreptococcus species. Skin and Skin Structure Infections caused by Bacteroides species including B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species. Gynecologic Infections, including endometritis, endomyometritis, tubo-ovarian abscess, and post-surgical vaginal cuff infection, caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species. Bacterial Septicemia caused by Bacteroides species including the B. fragilis group and Clostridium species. Bone and Joint Infections, as adjunctive therapy, caused by Bacteroides species including the B. fragilis group. Central Nervous System (CNS) Infections, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group. Lower Respiratory Tract Infections, including pneumonia, empyema, and lung abscess, caused by Bacteroides species including the B. fragilis group. Endocarditis caused by Bacteroides species including the B. fragilis group. Prophylaxis. The prophylactic administration of Metronidazole Injection, USP preoperatively, intraoperatively, and postoperatively may reduce the incidence of postoperative infection in patients undergoing elective colorectal surgery which is classified as contaminated or potentially contaminated. Prophylactic use of Metronidazole Injection, USP should be discontinued within 12 hours after surgery. If there are signs of infection, specimens for cultures should be obtained for the identification of the causative organism(s) so that appropriate therapy may be given (see DOSAGE AND ADMINISTRATION). To reduce the development of drug-resistant bacteria and maintain the effectiveness of metronidazole and other antibacterial drugs, metronidazole should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Metronidazole Injection, USP is a sterile, nonpyrogenic, isotonic, buffered parenteral dosage form of metronidazole in water for injection. Each 100 mL contains metronidazole 500 mg (5 mg/mL) and sodium chloride 790 mg in water for injection; with dibasic sodium phosphate (anhydrous) 48 mg and citric acid (anhydrous) 23 mg added as buffers. The osmolarity of this solution is 314 mOsmol/liter (calc.). Each 100 mL contains 14 mEq sodium, pH 5.8 (4.5 ― 7.0). Metronidazole is classified as a synthetic antibacterial and antiprotozoal agent and is administered by the intravenous route. Metronidazole, USP is chemically designated 2-methyl-5-nitroimidazole-1-ethanol (C6H9N3O3), a crystalline powder sparingly soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers."
},
{
"NDCCode": "0409-7811-37",
"PackageDescription": "20 POUCH in 1 CASE (0409-7811-37) / 4 BAG in 1 POUCH (0409-7811-32) / 100 mL in 1 BAG (0409-7811-11) ",
"NDC11Code": "00409-7811-37",
"ProductNDC": "0409-7811",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050907",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018890",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-04-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20050919",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment of Anaerobic Infections. Metronidazole Injection, USP is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with metronidazole therapy. In a mixed aerobic and anaerobic infection, antibiotics appropriate for the treatment of the aerobic infection should be used in addition to metronidazole. Metronidazole is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. Intra-abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus). Clostridium species, Eubacterium species, Peptococcus species, and Peptostreptococcus species. Skin and Skin Structure Infections caused by Bacteroides species including B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species. Gynecologic Infections, including endometritis, endomyometritis, tubo-ovarian abscess, and post-surgical vaginal cuff infection, caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species. Bacterial Septicemia caused by Bacteroides species including the B. fragilis group and Clostridium species. Bone and Joint Infections, as adjunctive therapy, caused by Bacteroides species including the B. fragilis group. Central Nervous System (CNS) Infections, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group. Lower Respiratory Tract Infections, including pneumonia, empyema, and lung abscess, caused by Bacteroides species including the B. fragilis group. Endocarditis caused by Bacteroides species including the B. fragilis group. Prophylaxis. The prophylactic administration of Metronidazole Injection, USP preoperatively, intraoperatively, and postoperatively may reduce the incidence of postoperative infection in patients undergoing elective colorectal surgery which is classified as contaminated or potentially contaminated. Prophylactic use of Metronidazole Injection, USP should be discontinued within 12 hours after surgery. If there are signs of infection, specimens for cultures should be obtained for the identification of the causative organism(s) so that appropriate therapy may be given (see DOSAGE AND ADMINISTRATION). To reduce the development of drug-resistant bacteria and maintain the effectiveness of metronidazole and other antibacterial drugs, metronidazole should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Metronidazole Injection, USP is a sterile, nonpyrogenic, isotonic, buffered parenteral dosage form of metronidazole in water for injection. Each 100 mL contains metronidazole 500 mg (5 mg/mL) and sodium chloride 790 mg in water for injection; with dibasic sodium phosphate (anhydrous) 48 mg and citric acid (anhydrous) 23 mg added as buffers. The osmolarity of this solution is 314 mOsmol/liter (calc.). Each 100 mL contains 14 mEq sodium, pH 5.8 (4.5 ― 7.0). Metronidazole is classified as a synthetic antibacterial and antiprotozoal agent and is administered by the intravenous route. Metronidazole, USP is chemically designated 2-methyl-5-nitroimidazole-1-ethanol (C6H9N3O3), a crystalline powder sparingly soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers."
},
{
"NDCCode": "10135-790-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (10135-790-30) ",
"NDC11Code": "10135-0790-30",
"ProductNDC": "10135-790",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Guaifenesin 400mg",
"NonProprietaryName": "Guaifenesin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "GUAIFENESIN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240301",
"SamplePackage": "N",
"IndicationAndUsage": "helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageway of bothersome mucus and make coughs more productive."
},
{
"NDCCode": "10135-790-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (10135-790-60) ",
"NDC11Code": "10135-0790-60",
"ProductNDC": "10135-790",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Guaifenesin 400mg",
"NonProprietaryName": "Guaifenesin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "GUAIFENESIN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240301",
"SamplePackage": "N",
"IndicationAndUsage": "helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageway of bothersome mucus and make coughs more productive."
},
{
"NDCCode": "10237-790-12",
"PackageDescription": "1 TUBE in 1 CARTON (10237-790-12) / 3.5 g in 1 TUBE",
"NDC11Code": "10237-0790-12",
"ProductNDC": "10237-790",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Orajel 3x Medicated For Toothache And Gum",
"NonProprietaryName": "Benzocaine, Menthol, Zinc Chloride",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M022",
"LabelerName": "Church & Dwight Co., Inc.",
"SubstanceName": "MENTHOL; BENZOCAINE; ZINC CHLORIDE",
"StrengthNumber": "2.6; 200; 1.5",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191101",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of pain due to minor irritation or injury of the mouth and gums."
},
{
"NDCCode": "10237-790-25",
"PackageDescription": "1 TUBE in 1 CARTON (10237-790-25) / 7 g in 1 TUBE",
"NDC11Code": "10237-0790-25",
"ProductNDC": "10237-790",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Orajel 3x Medicated For Toothache And Gum",
"NonProprietaryName": "Benzocaine, Menthol, Zinc Chloride",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M022",
"LabelerName": "Church & Dwight Co., Inc.",
"SubstanceName": "MENTHOL; BENZOCAINE; ZINC CHLORIDE",
"StrengthNumber": "2.6; 200; 1.5",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191101",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of pain due to minor irritation or injury of the mouth and gums."
},
{
"NDCCode": "10237-790-42",
"PackageDescription": "1 TUBE in 1 CARTON (10237-790-42) / 11.9 g in 1 TUBE",
"NDC11Code": "10237-0790-42",
"ProductNDC": "10237-790",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Orajel 3x Medicated For Toothache And Gum",
"NonProprietaryName": "Benzocaine, Menthol, Zinc Chloride",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M022",
"LabelerName": "Church & Dwight Co., Inc.",
"SubstanceName": "MENTHOL; BENZOCAINE; ZINC CHLORIDE",
"StrengthNumber": "2.6; 200; 1.5",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191101",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of pain due to minor irritation or injury of the mouth and gums."
},
{
"NDCCode": "10357-790-00",
"PackageDescription": "500 kg in 1 DRUM (10357-790-00) ",
"NDC11Code": "10357-0790-00",
"ProductNDC": "10357-790",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Salicylic Acid",
"DosageFormName": "POWDER",
"StartMarketingDate": "20230610",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "NOVACYL",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2023-06-13",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "10-JUN-23"
},
{
"NDCCode": "10967-790-27",
"PackageDescription": "76 g in 1 BOTTLE, WITH APPLICATOR (10967-790-27) ",
"NDC11Code": "10967-0790-27",
"ProductNDC": "10967-790",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mitchum Ultimate- 72 Hour Protection - Wild Energy Solid - Apdeo",
"NonProprietaryName": "Antiperspirant And Deodorant",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M019",
"LabelerName": "Revlon Consumer Products Corp.",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "20.2",
"StrengthUnit": "g/76g",
"Status": "Active",
"LastUpdate": "2025-10-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "Reduces underam wetness."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>66993-790-97</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (66993-790-97) / 60 POWDER, METERED in 1 INHALER</PackageDescription>
<NDC11Code>66993-0790-97</NDC11Code>
<ProductNDC>66993-790</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate</NonProprietaryName>
<DosageFormName>POWDER, METERED</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20231030</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020833</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231030</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Propionate DISKUS is indicated for the maintenance treatment of asthma as prophylactic therapy in patients aged 4 years and older. Important Limitation of Use. Fluticasone Propionate DISKUS is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>Fluticasone Propionate DISKUS inhalation powder is a dry powder inhaler for oral inhalation. The active component of Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. Fluticasone Propionate DISKUS is an orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (50, 100, or 250 mcg) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate DISKUS delivers 46, 94, and 229 mcg of fluticasone propionate from Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). In children with asthma aged 4 and 8 years, mean PIF through Fluticasone Propionate DISKUS was 70 and 104 L/min, respectively (range: 48 to 123 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>12634-790-97</NDCCode>
<PackageDescription>7 TABLET in 1 BOTTLE (12634-790-97)</PackageDescription>
<NDC11Code>12634-0790-97</NDC11Code>
<ProductNDC>12634-790</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glipizide</ProprietaryName>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074550</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Glipizide Tablets, USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Glipizide is an oral blood-glucose-lowering drug of the sulfonylurea class. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazine-carboxamido)ethyl]phenyl]sulfonyl]urea. The molecular formula is C 21H 27N 5O 4S; the molecular weight is 445.55; the structural formula is shown below:. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet, for oral administration, contains 5 mg or 10 mg glipizide. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, corn starch, silicon dioxide, stearic acid. Glipizide Tablets, USP 5 mg and 10 mg meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>66993-134-97</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (66993-134-97) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>66993-0134-97</NDC11Code>
<ProductNDC>66993-134</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Umeclidinium And Vilanterol Ellipta</ProprietaryName>
<NonProprietaryName>Umeclidinium Bromide And Vilanterol Trifenatate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20250411</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA203975</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>UMECLIDINIUM BROMIDE; VILANTEROL TRIFENATATE</SubstanceName>
<StrengthNumber>62.5; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Umeclidinium and Vilanterol ELLIPTA is indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). Limitations of Use. Umeclidinium and Vilanterol ELLIPTA is NOT indicated for the relief of acute bronchospasm or for the treatment of asthma. The safety and effectiveness of Umeclidinium and Vilanterol ELLIPTA in asthma have not been established.</IndicationAndUsage>
<Description>Umeclidinium and Vilanterol ELLIPTA is an inhalation powder drug product for delivery of a combination of umeclidinium (an anticholinergic) and vilanterol (a LABA) to patients by oral inhalation. Umeclidinium bromide has the chemical name 1-[2-(benzyloxy)ethyl]-4-(hydroxydiphenylmethyl)-1-azoniabicyclo[2.2.2]octane bromide and the following chemical structure. Umeclidinium bromide is a white powder with a molecular weight of 508.5, and the empirical formula is C29H34NO2Br (as a quaternary ammonium bromide compound). It is slightly soluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[(2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. Umeclidinium and Vilanterol ELLIPTA is a light grey and red plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized umeclidinium bromide (74.2 mcg equivalent to 62.5 mcg of umeclidinium), magnesium stearate (75 mcg), and lactose monohydrate (to 12.5 mg), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (to 12.5 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Umeclidinium and Vilanterol ELLIPTA delivers 55 mcg of umeclidinium and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-135-97</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (66993-135-97) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>66993-0135-97</NDC11Code>
<ProductNDC>66993-135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Furoate And Vilanterol</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate And Vilanterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220523</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA204275</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE FUROATE; VILANTEROL TRIFENATATE</SubstanceName>
<StrengthNumber>100; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220523</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Furoate/Vilanterol ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long‑acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).</IndicationAndUsage>
<Description>Fluticasone Furoate/Vilanterol ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. Fluticasone furoate/vilanterol ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100 or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone furoate/vilanterol ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-136-97</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (66993-136-97) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>66993-0136-97</NDC11Code>
<ProductNDC>66993-136</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Furoate And Vilanterol</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate And Vilanterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220523</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA204275</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE FUROATE; VILANTEROL TRIFENATATE</SubstanceName>
<StrengthNumber>200; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220523</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Furoate/Vilanterol ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long‑acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).</IndicationAndUsage>
<Description>Fluticasone Furoate/Vilanterol ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. Fluticasone furoate/vilanterol ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100 or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone furoate/vilanterol ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-166-97</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (66993-166-97) / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>66993-0166-97</NDC11Code>
<ProductNDC>66993-166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Furoate Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20250721</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250721</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Furoate ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. Fluticasone Furoate ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>Fluticasone Furoate ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Fluticasone Furoate ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Furoate ELLIPTA 50 mcg, Fluticasone Furoate ELLIPTA 100 mcg, and Fluticasone Furoate ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-167-97</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (66993-167-97) / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>66993-0167-97</NDC11Code>
<ProductNDC>66993-167</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Furoate Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20250721</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250721</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Furoate ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. Fluticasone Furoate ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>Fluticasone Furoate ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Fluticasone Furoate ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Furoate ELLIPTA 50 mcg, Fluticasone Furoate ELLIPTA 100 mcg, and Fluticasone Furoate ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-168-97</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (66993-168-97) / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>66993-0168-97</NDC11Code>
<ProductNDC>66993-168</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Furoate Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20250721</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250721</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Furoate ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. Fluticasone Furoate ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>Fluticasone Furoate ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Fluticasone Furoate ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Furoate ELLIPTA 50 mcg, Fluticasone Furoate ELLIPTA 100 mcg, and Fluticasone Furoate ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-189-97</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (66993-189-97) / 1 INHALER in 1 TRAY / 30 AEROSOL, POWDER in 1 INHALER</PackageDescription>
<NDC11Code>66993-0189-97</NDC11Code>
<ProductNDC>66993-189</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Umeclidinium Ellipta</ProprietaryName>
<NonProprietaryName>Umeclidinium</NonProprietaryName>
<DosageFormName>AEROSOL, POWDER</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260406</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205382</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>UMECLIDINIUM BROMIDE</SubstanceName>
<StrengthNumber>62.5</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260406</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Umeclidinium ELLIPTA is indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD).</IndicationAndUsage>
<Description>Umeclidinium ELLIPTA is an inhalation powder drug product for delivery of umeclidinium (an anticholinergic) to patients by oral inhalation. Umeclidinium bromide has the chemical name 1-[2-(benzyloxy)ethyl]-4-(hydroxydiphenylmethyl)-1-azoniabicyclo[2.2.2]octane bromide and the following chemical structure. Umeclidinium bromide is a white powder with a molecular weight of 508.5, and the empirical formula is C29H34NO2Br (as a quaternary ammonium bromide compound). It is slightly soluble in water. Umeclidinium ELLIPTA is a light grey and light green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized umeclidinium bromide (74.2 mcg equivalent to 62.5 mcg of umeclidinium), magnesium stearate (75 mcg), and lactose monohydrate (to 12.5 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Umeclidinium ELLIPTA delivers 55 mcg of umeclidinium per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (COPD with forced expiratory volume in 1 second/forced vital capacity [FEV1/FVC] <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 67.5 L/min (range: 41.6 to 83.3 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-584-97</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (66993-584-97) / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>66993-0584-97</NDC11Code>
<ProductNDC>66993-584</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20190208</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021077</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>100; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Propionate/Salmeterol DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Fluticasone Propionate/Salmeterol DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Fluticasone Propionate/Salmeterol DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone Propionate/Salmeterol DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate/Salmeterol DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-585-97</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (66993-585-97) / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>66993-0585-97</NDC11Code>
<ProductNDC>66993-585</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20190208</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021077</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>250; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Propionate/Salmeterol DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Fluticasone Propionate/Salmeterol DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Fluticasone Propionate/Salmeterol DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone Propionate/Salmeterol DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate/Salmeterol DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-586-97</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (66993-586-97) / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>66993-0586-97</NDC11Code>
<ProductNDC>66993-586</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20190208</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021077</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>500; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Propionate/Salmeterol DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Fluticasone Propionate/Salmeterol DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Fluticasone Propionate/Salmeterol DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone Propionate/Salmeterol DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate/Salmeterol DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from Fluticasone Propionate/Salmeterol DISKUS inhalation powder 100/50 mcg, Fluticasone Propionate/Salmeterol DISKUS inhalation powder 250/50 mcg, and Fluticasone Propionate/Salmeterol DISKUS inhalation powder 500/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-791-97</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (66993-791-97) / 60 POWDER, METERED in 1 INHALER</PackageDescription>
<NDC11Code>66993-0791-97</NDC11Code>
<ProductNDC>66993-791</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate</NonProprietaryName>
<DosageFormName>POWDER, METERED</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20231030</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020833</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231030</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Propionate DISKUS is indicated for the maintenance treatment of asthma as prophylactic therapy in patients aged 4 years and older. Important Limitation of Use. Fluticasone Propionate DISKUS is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>Fluticasone Propionate DISKUS inhalation powder is a dry powder inhaler for oral inhalation. The active component of Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. Fluticasone Propionate DISKUS is an orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (50, 100, or 250 mcg) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate DISKUS delivers 46, 94, and 229 mcg of fluticasone propionate from Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). In children with asthma aged 4 and 8 years, mean PIF through Fluticasone Propionate DISKUS was 70 and 104 L/min, respectively (range: 48 to 123 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-792-97</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (66993-792-97) / 60 POWDER, METERED in 1 INHALER</PackageDescription>
<NDC11Code>66993-0792-97</NDC11Code>
<ProductNDC>66993-792</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate</NonProprietaryName>
<DosageFormName>POWDER, METERED</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20231030</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020833</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231030</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone Propionate DISKUS is indicated for the maintenance treatment of asthma as prophylactic therapy in patients aged 4 years and older. Important Limitation of Use. Fluticasone Propionate DISKUS is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>Fluticasone Propionate DISKUS inhalation powder is a dry powder inhaler for oral inhalation. The active component of Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. Fluticasone Propionate DISKUS is an orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (50, 100, or 250 mcg) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Fluticasone Propionate DISKUS delivers 46, 94, and 229 mcg of fluticasone propionate from Fluticasone Propionate DISKUS 50 mcg, Fluticasone Propionate DISKUS 100 mcg, and Fluticasone Propionate DISKUS 250 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). In children with asthma aged 4 and 8 years, mean PIF through Fluticasone Propionate DISKUS was 70 and 104 L/min, respectively (range: 48 to 123 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>66993-959-31</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (66993-959-31) / 30 g in 1 TUBE</PackageDescription>
<NDC11Code>66993-0959-31</NDC11Code>
<ProductNDC>66993-959</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Phosphate And Tretinion</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Tretinoin</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180628</StartMarketingDate>
<EndMarketingDate>20251031</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA050803</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; TRETINOIN</SubstanceName>
<StrengthNumber>10; .25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE], Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180628</StartMarketingDatePackage>
<EndMarketingDatePackage>20251031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin Phosphate and Tretinoin Gel, 1.2%/0.025% is indicated for the topical treatment of acne vulgaris in patients 12 years and older.</IndicationAndUsage>
<Description>Clindamycin Phosphate and Tretinoin Gel, 1.2%/0.025%, is a fixed combination of 2 solubilized active ingredients in an aqueous-based gel. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Molecular Formula: C18H34ClN2O8PS. Molecular Weight: 504.97. The chemical name for tretinoin is all-trans 3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid family of compounds. The structural formula for tretinoin is represented below. Molecular Formula: C20H28O2. Molecular Weight: 300.44. Clindamycin Phosphate and Tretinoin Gel contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, carbomer homopolymer (type C), edetate disodium, laureth 4, methylparaben, propylene glycol, purified water, and tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>66993-959-61</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (66993-959-61) / 60 g in 1 TUBE</PackageDescription>
<NDC11Code>66993-0959-61</NDC11Code>
<ProductNDC>66993-959</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Phosphate And Tretinion</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Tretinoin</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180628</StartMarketingDate>
<EndMarketingDate>20251031</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA050803</ApplicationNumber>
<LabelerName>Prasco Laboratories</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; TRETINOIN</SubstanceName>
<StrengthNumber>10; .25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE], Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180628</StartMarketingDatePackage>
<EndMarketingDatePackage>20251031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin Phosphate and Tretinoin Gel, 1.2%/0.025% is indicated for the topical treatment of acne vulgaris in patients 12 years and older.</IndicationAndUsage>
<Description>Clindamycin Phosphate and Tretinoin Gel, 1.2%/0.025%, is a fixed combination of 2 solubilized active ingredients in an aqueous-based gel. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Molecular Formula: C18H34ClN2O8PS. Molecular Weight: 504.97. The chemical name for tretinoin is all-trans 3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid family of compounds. The structural formula for tretinoin is represented below. Molecular Formula: C20H28O2. Molecular Weight: 300.44. Clindamycin Phosphate and Tretinoin Gel contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, carbomer homopolymer (type C), edetate disodium, laureth 4, methylparaben, propylene glycol, purified water, and tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>0006-3083-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0006-3083-01) / 2.4 mL in 1 VIAL (0006-3083-99) </PackageDescription>
<NDC11Code>00006-3083-01</NDC11Code>
<ProductNDC>0006-3083</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Keytruda Qlex</ProprietaryName>
<NonProprietaryName>Pembrolizumab And Berahyaluronidase Alfa-pmph</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250919</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761467</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme LLC</LabelerName>
<SubstanceName>PEMBROLIZUMAB; BERAHYALURONIDASE ALFA</SubstanceName>
<StrengthNumber>165; 2000</StrengthNumber>
<StrengthUnit>mg/mL; U/mL</StrengthUnit>
<Pharm_Classes>Endoglycosidase [EPC], Glycoside Hydrolases [CS], Programmed Death Receptor-1 Blocking Antibody [EPC], Programmed Death Receptor-1-directed Antibody Interactions [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>KEYTRUDA QLEX is a combination of pembrolizumab, a programmed death receptor-1 (PD-1)-blocking antibody, and berahyaluronidase alfa, an endoglycosidase, indicated:. Melanoma: 1 for the treatment of adult patients with unresectable or metastatic melanoma. (1.1), 2 for the adjuvant treatment of adult and pediatric patients 12 years and older with Stage IIB, IIC, or III melanoma following complete resection. (1.1).</IndicationAndUsage>
<Description>KEYTRUDA QLEX is a fixed-combination drug product containing pembrolizumab and berahyaluronidase alfa. Pembrolizumab is a programmed death receptor-1 (PD 1)-blocking antibody. Pembrolizumab is a humanized monoclonal IgG4 kappa antibody with an approximate molecular weight of 149 kDa. Pembrolizumab is produced in recombinant Chinese hamster ovary (CHO) cells. Berahyaluronidase alfa is an endoglycosidase used to enhance dispersion and permeation, which facilitates delivery of increased volume of pembrolizumab that is co-administered subcutaneously. It is produced by mammalian CHO (Chinese Hamster Ovary) cells containing a DNA plasmid encoding a variant of human hyaluronidase PH20. It is a glycosylated protein with an approximate molecular weight of 49 kDa under nonreducing, deglycosylated conditions. KEYTRUDA QLEX (pembrolizumab and berahyaluronidase alfa-pmph) injection is a sterile, preservative-free, clear to slightly opalescent, colorless to slightly yellow solution supplied in single-dose vials for subcutaneous administration. KEYTRUDA QLEX is supplied as two different configurations: : 1 Each KEYTRUDA QLEX 2.4 mL single-dose vial contains 395 mg of pembrolizumab and 4,800 units of berahyaluronidase alfa, and histidine (0.7 mg), histidine hydrochloride monohydrate (4.1 mg), methionine (3.6 mg), polysorbate 80 (0.5 mg), sucrose (168 mg), and Water for Injection, USP. The pH is 5.3-5.9. , 2 Each KEYTRUDA QLEX 4.8 mL single-dose vial contains 790 mg of pembrolizumab and 9,600 units of berahyaluronidase alfa, and histidine (1.4 mg), histidine hydrochloride monohydrate (8.2 mg), methionine (7.2 mg), polysorbate 80 (1 mg), sucrose (336 mg), and Water for Injection, USP. The pH is 5.3-5.9.</Description>
</NDC>
<NDC>
<NDCCode>0006-5083-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0006-5083-01) / 4.8 mL in 1 VIAL (0006-5083-99) </PackageDescription>
<NDC11Code>00006-5083-01</NDC11Code>
<ProductNDC>0006-5083</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Keytruda Qlex</ProprietaryName>
<NonProprietaryName>Pembrolizumab And Berahyaluronidase Alfa-pmph</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250919</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761467</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme LLC</LabelerName>
<SubstanceName>PEMBROLIZUMAB; BERAHYALURONIDASE ALFA</SubstanceName>
<StrengthNumber>165; 2000</StrengthNumber>
<StrengthUnit>mg/mL; U/mL</StrengthUnit>
<Pharm_Classes>Endoglycosidase [EPC], Glycoside Hydrolases [CS], Programmed Death Receptor-1 Blocking Antibody [EPC], Programmed Death Receptor-1-directed Antibody Interactions [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>KEYTRUDA QLEX is a combination of pembrolizumab, a programmed death receptor-1 (PD-1)-blocking antibody, and berahyaluronidase alfa, an endoglycosidase, indicated:. Melanoma: 1 for the treatment of adult patients with unresectable or metastatic melanoma. (1.1), 2 for the adjuvant treatment of adult and pediatric patients 12 years and older with Stage IIB, IIC, or III melanoma following complete resection. (1.1).</IndicationAndUsage>
<Description>KEYTRUDA QLEX is a fixed-combination drug product containing pembrolizumab and berahyaluronidase alfa. Pembrolizumab is a programmed death receptor-1 (PD 1)-blocking antibody. Pembrolizumab is a humanized monoclonal IgG4 kappa antibody with an approximate molecular weight of 149 kDa. Pembrolizumab is produced in recombinant Chinese hamster ovary (CHO) cells. Berahyaluronidase alfa is an endoglycosidase used to enhance dispersion and permeation, which facilitates delivery of increased volume of pembrolizumab that is co-administered subcutaneously. It is produced by mammalian CHO (Chinese Hamster Ovary) cells containing a DNA plasmid encoding a variant of human hyaluronidase PH20. It is a glycosylated protein with an approximate molecular weight of 49 kDa under nonreducing, deglycosylated conditions. KEYTRUDA QLEX (pembrolizumab and berahyaluronidase alfa-pmph) injection is a sterile, preservative-free, clear to slightly opalescent, colorless to slightly yellow solution supplied in single-dose vials for subcutaneous administration. KEYTRUDA QLEX is supplied as two different configurations: : 1 Each KEYTRUDA QLEX 2.4 mL single-dose vial contains 395 mg of pembrolizumab and 4,800 units of berahyaluronidase alfa, and histidine (0.7 mg), histidine hydrochloride monohydrate (4.1 mg), methionine (3.6 mg), polysorbate 80 (0.5 mg), sucrose (168 mg), and Water for Injection, USP. The pH is 5.3-5.9. , 2 Each KEYTRUDA QLEX 4.8 mL single-dose vial contains 790 mg of pembrolizumab and 9,600 units of berahyaluronidase alfa, and histidine (1.4 mg), histidine hydrochloride monohydrate (8.2 mg), methionine (7.2 mg), polysorbate 80 (1 mg), sucrose (336 mg), and Water for Injection, USP. The pH is 5.3-5.9.</Description>
</NDC>
<NDC>
<NDCCode>0143-9772-26</NDCCode>
<PackageDescription>100 mL in 1 BAG (0143-9772-26)</PackageDescription>
<NDC11Code>00143-9772-26</NDC11Code>
<ProductNDC>0143-9772</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20090804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078084</ApplicationNumber>
<LabelerName>West-ward Pharmaceutical Corp</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC],Nitroimidazoles [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Metronidazole Injection, USP is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with Metronidazole Injection, USP therapy. In a mixed aerobic and anaerobic infection, antibiotics appropriate for the treatment of the aerobic infection should be used in addition to Metronidazole Injection, USP. Metronidazole Injection, USP is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. Intra-Abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus), Clostridium species, Eubacterium species, Peptococcus species and Peptostreptococcus species. Skin and Skin Structure Infections caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species. Gynecologic Infections, including endometritis, endomyometritis, tubo-ovarian abscess and postsurgical vaginal cuff infection, caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptostreptococcus species and Fusobacterium species. Bacterial Septicemia caused by Bacteroides species including the B. fragilis group and Clostridium species. Bone and Joint Infections, as adjunctive therapy, caused by Bacteroides species including the B. fragilis group. Central Nervous System (CNS) Infections, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group. Lower Respiratory Tract Infections, including pneumonia, empyema and lung abscess, caused by Bacteroides species including the B. fragilis group. Endocarditis caused by Bacteroides species including the B. fragilis group.</IndicationAndUsage>
<Description>Metronidazole Injection, USP, is a parenteral dosage form of the synthetic antibacterial agent 1-(ß-hydroxyethyl)-2-methyl-5- nitroimidazole. Metronidazole Injection, USP, in 100 mL single dose plastic container, is a sterile, nonpyrogenic, iso-osmotic, buffered solution of 500 mg Metronidazole, USP, 790 mg Sodium Chloride, USP, 47.6 mg Anhydrous Disodium Hydrogen Phosphate, USP and 22.9 mg Citric Acid Monohydrate, USP. Metronidazole Injection, USP has an osmolarity of 310 mOsmol/L (calc) and a pH of 5.5 (4.5 to 7.0). Each container contains 14 mEq of sodium. The plastic container is fabricated from a specially formulated polyvinyl chloride plastic. Water can permeate from inside the container into the overwrap in amounts insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0338-1055-48</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-1055-48) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-1055-48</NDC11Code>
<ProductNDC>0338-1055</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19811224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018657</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19811224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metronidazole Injection is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with Metronidazole Injection therapy. In a mixed aerobic and anaerobic infection, antibacterial drugs appropriate for the treatment of the aerobic infection should be used in addition to Metronidazole Injection. Metronidazole Injection is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. : 1 Intra-Abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus), Clostridium species, Eubacterium species, Peptococcus species and Peptostreptococcus species in adults and pediatric patients less than 4 months of age., 2 Skin and Skin Structure Infections caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species in adults., 3 Gynecologic Infections, including endometritis, endomyometritis, tubo-ovarian abscess and postsurgical vaginal cuff infection, caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species in adults., 4 Bacterial Septicemia caused by Bacteroides species including the B. fragilis group and Clostridium species in adults., 5 Bone and Joint Infections, as adjunctive therapy, caused by Bacteroides species including the B. fragilis group in adults., 6 Central Nervous System (CNS) Infections, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group in adults. , 7 Lower Respiratory Tract Infections, including pneumonia, empyema and lung abscess, caused by Bacteroides species including the B. fragilis group in adults., 8 Endocarditis caused by Bacteroides species including the B. fragilis group in adults.</IndicationAndUsage>
<Description>Metronidazole Injection, USP, is a parenteral formulation of the synthetic nitroimidazole antibacterial agent 2-methyl-5-nitro-1H-imidazole-1-ethanol. Metronidazole Injection, USP, in 100 mL VIAFLEX Plus single dose plastic container, is a sterile, nonpyrogenic, iso-osmotic, buffered solution of 500 mg Metronidazole, USP, 790 mg Sodium Chloride, USP, 47.6 mg Dibasic Sodium Phosphate Dried, USP and 22.9 mg Citric Acid Anhydrous, USP. Metronidazole Injection, USP has an osmolarity of 310 mOsmol/L (calc) and a pH of 5.5 (4.5 to 7.0). Each container contains 14 mEq of sodium. The plastic container is fabricated from a specially formulated polyvinyl chloride plastic. Water can permeate from inside the container into the overwrap in amounts insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-9541-24</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (0338-9541-24) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-9541-24</NDC11Code>
<ProductNDC>0338-9541</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19811224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018657</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19811224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metronidazole Injection is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with Metronidazole Injection therapy. In a mixed aerobic and anaerobic infection, antibacterial drugs appropriate for the treatment of the aerobic infection should be used in addition to Metronidazole Injection. Metronidazole Injection is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. : 1 Intra-Abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus), Clostridium species, Eubacterium species, Peptococcus species and Peptostreptococcus species in adults and pediatric patients less than 4 months of age. , 2 Skin and Skin Structure Infections caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species in adults. , 3 Gynecologic Infections, including endometritis, endomyometritis, tubo-ovarian abscess and postsurgical vaginal cuff infection, caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species in adults. , 4 Bacterial Septicemia caused by Bacteroides species including the B. fragilis group and Clostridium species in adults. , 5 Bone and Joint Infections, as adjunctive therapy, caused by Bacteroides species including the B. fragilis group in adults. , 6 Central Nervous System (CNS) Infections, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group in adults. , 7 Lower Respiratory Tract Infections, including pneumonia, empyema and lung abscess, caused by Bacteroides species including the B. fragilis group in adults., 8 Endocarditis caused by Bacteroides species including the B. fragilis group in adults.</IndicationAndUsage>
<Description>Metronidazole Injection, USP, is a parenteral formulation of the synthetic nitroimidazole antibacterial agent 2-methyl-5-nitro-1H-imidazole-1-ethanol. Metronidazole Injection, USP, in 100 mL VIAFLEX Plus single dose plastic container, is a sterile, nonpyrogenic, iso-osmotic, buffered solution of 500 mg Metronidazole, USP, 790 mg Sodium Chloride, USP, 47.6 mg Dibasic Sodium Phosphate Dried, USP and 22.9 mg Citric Acid Anhydrous, USP. Metronidazole Injection, USP has an osmolarity of 310 mOsmol/L (calc) and a pH of 5.5 (4.5 to 7.0). Each container contains 14 mEq of sodium. The plastic container is fabricated from a specially formulated polyvinyl chloride plastic. Water can permeate from inside the container into the overwrap in amounts insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0409-7811-24</NDCCode>
<PackageDescription>24 POUCH in 1 CASE (0409-7811-24) / 1 BAG in 1 POUCH / 100 mL in 1 BAG (0409-7811-31) </PackageDescription>
<NDC11Code>00409-7811-24</NDC11Code>
<ProductNDC>0409-7811</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050907</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018890</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050907</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment of Anaerobic Infections. Metronidazole Injection, USP is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with metronidazole therapy. In a mixed aerobic and anaerobic infection, antibiotics appropriate for the treatment of the aerobic infection should be used in addition to metronidazole. Metronidazole is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. Intra-abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus). Clostridium species, Eubacterium species, Peptococcus species, and Peptostreptococcus species. Skin and Skin Structure Infections caused by Bacteroides species including B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species. Gynecologic Infections, including endometritis, endomyometritis, tubo-ovarian abscess, and post-surgical vaginal cuff infection, caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species. Bacterial Septicemia caused by Bacteroides species including the B. fragilis group and Clostridium species. Bone and Joint Infections, as adjunctive therapy, caused by Bacteroides species including the B. fragilis group. Central Nervous System (CNS) Infections, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group. Lower Respiratory Tract Infections, including pneumonia, empyema, and lung abscess, caused by Bacteroides species including the B. fragilis group. Endocarditis caused by Bacteroides species including the B. fragilis group. Prophylaxis. The prophylactic administration of Metronidazole Injection, USP preoperatively, intraoperatively, and postoperatively may reduce the incidence of postoperative infection in patients undergoing elective colorectal surgery which is classified as contaminated or potentially contaminated. Prophylactic use of Metronidazole Injection, USP should be discontinued within 12 hours after surgery. If there are signs of infection, specimens for cultures should be obtained for the identification of the causative organism(s) so that appropriate therapy may be given (see DOSAGE AND ADMINISTRATION). To reduce the development of drug-resistant bacteria and maintain the effectiveness of metronidazole and other antibacterial drugs, metronidazole should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Metronidazole Injection, USP is a sterile, nonpyrogenic, isotonic, buffered parenteral dosage form of metronidazole in water for injection. Each 100 mL contains metronidazole 500 mg (5 mg/mL) and sodium chloride 790 mg in water for injection; with dibasic sodium phosphate (anhydrous) 48 mg and citric acid (anhydrous) 23 mg added as buffers. The osmolarity of this solution is 314 mOsmol/liter (calc.). Each 100 mL contains 14 mEq sodium, pH 5.8 (4.5 ― 7.0). Metronidazole is classified as a synthetic antibacterial and antiprotozoal agent and is administered by the intravenous route. Metronidazole, USP is chemically designated 2-methyl-5-nitroimidazole-1-ethanol (C6H9N3O3), a crystalline powder sparingly soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0409-7811-37</NDCCode>
<PackageDescription>20 POUCH in 1 CASE (0409-7811-37) / 4 BAG in 1 POUCH (0409-7811-32) / 100 mL in 1 BAG (0409-7811-11) </PackageDescription>
<NDC11Code>00409-7811-37</NDC11Code>
<ProductNDC>0409-7811</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050907</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018890</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment of Anaerobic Infections. Metronidazole Injection, USP is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with metronidazole therapy. In a mixed aerobic and anaerobic infection, antibiotics appropriate for the treatment of the aerobic infection should be used in addition to metronidazole. Metronidazole is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. Intra-abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus). Clostridium species, Eubacterium species, Peptococcus species, and Peptostreptococcus species. Skin and Skin Structure Infections caused by Bacteroides species including B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species. Gynecologic Infections, including endometritis, endomyometritis, tubo-ovarian abscess, and post-surgical vaginal cuff infection, caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species and Fusobacterium species. Bacterial Septicemia caused by Bacteroides species including the B. fragilis group and Clostridium species. Bone and Joint Infections, as adjunctive therapy, caused by Bacteroides species including the B. fragilis group. Central Nervous System (CNS) Infections, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group. Lower Respiratory Tract Infections, including pneumonia, empyema, and lung abscess, caused by Bacteroides species including the B. fragilis group. Endocarditis caused by Bacteroides species including the B. fragilis group. Prophylaxis. The prophylactic administration of Metronidazole Injection, USP preoperatively, intraoperatively, and postoperatively may reduce the incidence of postoperative infection in patients undergoing elective colorectal surgery which is classified as contaminated or potentially contaminated. Prophylactic use of Metronidazole Injection, USP should be discontinued within 12 hours after surgery. If there are signs of infection, specimens for cultures should be obtained for the identification of the causative organism(s) so that appropriate therapy may be given (see DOSAGE AND ADMINISTRATION). To reduce the development of drug-resistant bacteria and maintain the effectiveness of metronidazole and other antibacterial drugs, metronidazole should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Metronidazole Injection, USP is a sterile, nonpyrogenic, isotonic, buffered parenteral dosage form of metronidazole in water for injection. Each 100 mL contains metronidazole 500 mg (5 mg/mL) and sodium chloride 790 mg in water for injection; with dibasic sodium phosphate (anhydrous) 48 mg and citric acid (anhydrous) 23 mg added as buffers. The osmolarity of this solution is 314 mOsmol/liter (calc.). Each 100 mL contains 14 mEq sodium, pH 5.8 (4.5 ― 7.0). Metronidazole is classified as a synthetic antibacterial and antiprotozoal agent and is administered by the intravenous route. Metronidazole, USP is chemically designated 2-methyl-5-nitroimidazole-1-ethanol (C6H9N3O3), a crystalline powder sparingly soluble in water. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>10135-790-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (10135-790-30) </PackageDescription>
<NDC11Code>10135-0790-30</NDC11Code>
<ProductNDC>10135-790</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Guaifenesin 400mg</ProprietaryName>
<NonProprietaryName>Guaifenesin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>GUAIFENESIN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageway of bothersome mucus and make coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10135-790-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (10135-790-60) </PackageDescription>
<NDC11Code>10135-0790-60</NDC11Code>
<ProductNDC>10135-790</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Guaifenesin 400mg</ProprietaryName>
<NonProprietaryName>Guaifenesin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>GUAIFENESIN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageway of bothersome mucus and make coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10237-790-12</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (10237-790-12) / 3.5 g in 1 TUBE</PackageDescription>
<NDC11Code>10237-0790-12</NDC11Code>
<ProductNDC>10237-790</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Orajel 3x Medicated For Toothache And Gum</ProprietaryName>
<NonProprietaryName>Benzocaine, Menthol, Zinc Chloride</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M022</ApplicationNumber>
<LabelerName>Church & Dwight Co., Inc.</LabelerName>
<SubstanceName>MENTHOL; BENZOCAINE; ZINC CHLORIDE</SubstanceName>
<StrengthNumber>2.6; 200; 1.5</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of pain due to minor irritation or injury of the mouth and gums.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10237-790-25</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (10237-790-25) / 7 g in 1 TUBE</PackageDescription>
<NDC11Code>10237-0790-25</NDC11Code>
<ProductNDC>10237-790</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Orajel 3x Medicated For Toothache And Gum</ProprietaryName>
<NonProprietaryName>Benzocaine, Menthol, Zinc Chloride</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M022</ApplicationNumber>
<LabelerName>Church & Dwight Co., Inc.</LabelerName>
<SubstanceName>MENTHOL; BENZOCAINE; ZINC CHLORIDE</SubstanceName>
<StrengthNumber>2.6; 200; 1.5</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of pain due to minor irritation or injury of the mouth and gums.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10237-790-42</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (10237-790-42) / 11.9 g in 1 TUBE</PackageDescription>
<NDC11Code>10237-0790-42</NDC11Code>
<ProductNDC>10237-790</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Orajel 3x Medicated For Toothache And Gum</ProprietaryName>
<NonProprietaryName>Benzocaine, Menthol, Zinc Chloride</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M022</ApplicationNumber>
<LabelerName>Church & Dwight Co., Inc.</LabelerName>
<SubstanceName>MENTHOL; BENZOCAINE; ZINC CHLORIDE</SubstanceName>
<StrengthNumber>2.6; 200; 1.5</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of pain due to minor irritation or injury of the mouth and gums.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10357-790-00</NDCCode>
<PackageDescription>500 kg in 1 DRUM (10357-790-00) </PackageDescription>
<NDC11Code>10357-0790-00</NDC11Code>
<ProductNDC>10357-790</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Salicylic Acid</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20230610</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>NOVACYL</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-06-13</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>10-JUN-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>10967-790-27</NDCCode>
<PackageDescription>76 g in 1 BOTTLE, WITH APPLICATOR (10967-790-27) </PackageDescription>
<NDC11Code>10967-0790-27</NDC11Code>
<ProductNDC>10967-790</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mitchum Ultimate- 72 Hour Protection - Wild Energy Solid - Apdeo</ProprietaryName>
<NonProprietaryName>Antiperspirant And Deodorant</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M019</ApplicationNumber>
<LabelerName>Revlon Consumer Products Corp.</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>20.2</StrengthNumber>
<StrengthUnit>g/76g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Reduces underam wetness.</IndicationAndUsage>
</NDC>
</NDCList>