{
"NDC": [
{
"NDCCode": "67046-1078-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-1078-3) ",
"NDC11Code": "67046-1078-03",
"ProductNDC": "67046-1078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077652",
"LabelerName": "Coupler LLC",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250130",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated ( 1, 12.4). : 1 Pneumonia: Nosocomial ( 1.1) and Community Acquired ( 1.2, 1.3) , 2 Skin and Skin Structure Infections (SSSI): Complicated ( 1.4) and Uncomplicated ( 1.5) , 3 Chronic bacterial prostatitis ( 1.6) , 4 Inhalational Anthrax, Post-Exposure in adult and pediatric patients ( 1.7) , 5 Plague in adult and pediatric patients ( 1.8) , 6 Urinary Tract Infections (UTI): Complicated ( 1.9, 1.10) and Uncomplicated ( 1.12) , 7 Acute Pyelonephritis ( 1.11) , 8 Acute Bacterial Exacerbation of Chronic Bronchitis ( 1.13) , 9 Acute Bacterial Sinusitis ( 1.14) .",
"Description": "Levofloxacin tablets are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1. The Chemical Structure of Levofloxacin. Its molecular formula is C 18H 20FN 3O 4 ½ H 2O and the molecular weight is 370.38. Levofloxacin, USP is a light yellowish–white to yellow–white crystals or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely solublein this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely solublein this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitrochelation potential has the following formation order:. Al +3> Cu +2> Zn +2> Mg +2> Ca +2. Each levofloxacin tablet, USP intended for oral administration contains levofloxacin hemihydrate equivalent to 250 mg or 500 mg or 750 mg of levofloxacin. In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, talc and titanium dioxide. The product meets USP Dissolution Test 2."
},
{
"NDCCode": "36987-1078-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1078-3)",
"NDC11Code": "36987-1078-03",
"ProductNDC": "36987-1078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hog Epithelium",
"NonProprietaryName": "Hog Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "SUS SCROFA SKIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS],Non-Standardized Animal Skin Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1078-3",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (37662-1078-3) ",
"NDC11Code": "37662-1078-03",
"ProductNDC": "37662-1078",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Manganum Aceticum",
"NonProprietaryName": "Manganum Aceticum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220728",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "MANGANESE ACETATE TETRAHYDRATE",
"StrengthNumber": "12",
"StrengthUnit": "[hp_C]/1",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2022-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220728",
"SamplePackage": "N"
},
{
"NDCCode": "68745-1078-3",
"PackageDescription": ".9 mL in 1 PACKET (68745-1078-3)",
"NDC11Code": "68745-1078-03",
"ProductNDC": "68745-1078",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Perfection Lumiere",
"ProprietaryNameSuffix": "Long-wear Flawless Fluid Sunscreen Makeup Broad Spectrum Spf 15, 54 Beige Ambre",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120901",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "CHANEL PARFUMS BEAUTE",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "31",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2014-04-22"
},
{
"NDCCode": "70771-1078-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (70771-1078-3) ",
"NDC11Code": "70771-1078-03",
"ProductNDC": "70771-1078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Felbamate",
"NonProprietaryName": "Felbamate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208970",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "FELBAMATE",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170815",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1078-3",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71335-1078-3) ",
"NDC11Code": "71335-1078-03",
"ProductNDC": "71335-1078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202825",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190205",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)] : : 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "Sertraline hydrochloride tablets, USP contain sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C 17H 17NCl 2HCl is represented by the following structural formula:. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets, USP are supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate anhydrous, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Blue # 2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, iron oxide yellow (in 100 mg tablet), and titanium dioxide."
},
{
"NDCCode": "0093-1078-53",
"PackageDescription": "50 TABLET, FILM COATED in 1 BOTTLE (0093-1078-53) ",
"NDC11Code": "00093-1078-53",
"ProductNDC": "0093-1078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefprozil",
"NonProprietaryName": "Cefprozil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20051223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065208",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "CEFPROZIL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2022-03-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20051223",
"SamplePackage": "N",
"IndicationAndUsage": "Cefprozil tablets are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Cefprozil, USP is a semi-synthetic broad-spectrum cephalosporin antibiotic. Cefprozil, USP is a cis and trans isomeric mixture (≥ 90% cis). The chemical name for the monohydrate is (6R,7R)-7-[(R)-2-amino-2-(p-hydroxyphenyl)acetamido]-8-oxo-3-propenyl-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid monohydrate, and the structural formula is. C18H19N3O5SH2O M.W. 407.45. Cefprozil, USP is a white to yellowish powder. Cefprozil Tablets USP are intended for oral administration. Cefprozil Tablets USP contain cefprozil, USP equivalent to 250 mg or 500 mg of anhydrous cefprozil. In addition, each tablet contains the following inactive ingredients: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide. The 250 mg tablets also contain D&C Yellow No. 10 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, and FD&C Yellow No. 6 Aluminum Lake."
},
{
"NDCCode": "0378-1078-93",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (0378-1078-93) ",
"NDC11Code": "00378-1078-93",
"ProductNDC": "0378-1078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan And Amlodipine",
"NonProprietaryName": "Telmisartan And Amlodipine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202516",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "TELMISARTAN; AMLODIPINE BESYLATE",
"StrengthNumber": "80; 10",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2024-07-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140919",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient's baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of < 140 mmHg (systolic) and 16% likelihood of achieving < 90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.",
"Description": "Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets contain telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is a white or slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is chemically described as 4′-[[4-Methyl-6-(1-methyl-1H-benzimidazol-2yl)-2-propyl-1H-benzimidazol-1yl]methyl]biphenyl-2-carboxylic acid. Its molecular formula is C33H30N4O2 and its structural formula is:. Telmisartan and amlodipine tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-ethyl 5-methyl (4RS)-2-[(2-aminoethoxy) methyl]-4-(2-chlorophenyl)-6-methyl-1,4 dihydropyridine-3,5-dicarboxylate benzenesulfonate. Its molecular formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg and 80/10 mg. Telmisartan and amlodipine tablets also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue No. 1 Aluminum Lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, pregelatinized starch (corn) and sodium hydroxide. Telmisartan and amlodipine tablets are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets require protection from light. Meets USP Dissolution Test 2."
},
{
"NDCCode": "53808-1078-2",
"PackageDescription": "60 TABLET, FILM COATED in 1 BLISTER PACK (53808-1078-2)",
"NDC11Code": "53808-1078-02",
"ProductNDC": "53808-1078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Simvastatin",
"NonProprietaryName": "Simvastatin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078034",
"LabelerName": "State of Florida DOH Central Pharmacy",
"SubstanceName": "SIMVASTATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin can be started simultaneously with diet.",
"Description": "Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Tablets simvastatin for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: ascorbic acid, citric acid, hydroxypropyl cellulose, hypromellose, iron oxides, lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch (maize), talc, and titanium dioxide. Butylated hydroxyanisole is added as a preservative. Simvastatin 10mg, 20mg, and 40 mg contain red and yellow ferric oxide. Simvastatin 80 mg contains red ferric oxide."
},
{
"NDCCode": "54868-1078-1",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (54868-1078-1)",
"NDC11Code": "54868-1078-01",
"ProductNDC": "54868-1078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130627",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078494",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propranolol hydrochloride extended-release capsules are indicated in the management of hypertension. It may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride extended-release capsules are not indicated in the management of hypertensive emergencies.",
"Description": "Propranolol hydrochloride, USP is a synthetic beta-adrenergic receptor-blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. Its molecular and structural formulae are. C16H21NO2·HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and ethanol. Its molecular weight is 295.80. Propranolol hydrochloride extended-release capsules are formulated to provide a sustained release of propranolol hydrochloride. Propranolol hydrochloride extended-release capsules are available as 60 mg, 80 mg, 120 mg, and 160 mg capsules for oral administration. The inactive ingredients contained in propranolol hydrochloride extended-release capsules are: ethylcellulose, gelatin, hydroxypropyl cellulose, povidone, sugar spheres, talc, titanium dioxide. In addition, the 60 mg and 80 mg capsule shells contain yellow iron oxide. The 120 mg capsule shells contain black iron oxide and yellow iron oxide. The 160 mg capsule shells contain black iron oxide. The ink ingredients are common for all strengths: Opacode S-1-8114 or Opacode S-1-8115 black contains: D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, pharmaceutical glaze, propylene glycol, and synthetic black iron oxide. This drug product complies with USP Drug Release Test 1."
},
{
"NDCCode": "59262-600-30",
"PackageDescription": "1078 GLOBULE in 1 BOTTLE, GLASS (59262-600-30)",
"NDC11Code": "59262-0600-30",
"ProductNDC": "59262-600",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Stress And Tension Relief",
"NonProprietaryName": "Asafetida, Crataegus Fruit, Lycopus Virginicus And Passiflora Incarnata Flowering Top",
"DosageFormName": "GLOBULE",
"RouteName": "ORAL",
"StartMarketingDate": "20130702",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Similasan Corporation",
"SubstanceName": "ASAFETIDA; CRATAEGUS FRUIT; LYCOPUS VIRGINICUS; PASSIFLORA INCARNATA FLOWERING TOP",
"StrengthNumber": "4; 4; 3; 4",
"StrengthUnit": "[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Relieves symptoms of stress and simple nervous tension-- inner tension with palpitations- inner tension with gastro-intestinal cramps and nervous constipation- nervous digestive disorders- nervous sleeplessness, general irritability and tension."
},
{
"NDCCode": "67046-0003-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0003-3) ",
"NDC11Code": "67046-0003-03",
"ProductNDC": "67046-0003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20241218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241218",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)]."
},
{
"NDCCode": "67046-0007-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0007-3) ",
"NDC11Code": "67046-0007-03",
"ProductNDC": "67046-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260505",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203346",
"LabelerName": "Coupler LLC",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260505",
"SamplePackage": "N",
"IndicationAndUsage": "Alprazolam tablets are indicated for the: : 1 acute treatment of generalized anxiety disorder (GAD) in adults., 2 treatment of panic disorder (PD), with or without agoraphobia in adults.",
"Description": "Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam USP is a white to off-white, crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam tablet USP, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium 85% with sodium benzoate 15%, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition, the 0.5 mg tablet contains FD&C Yellow # 6 aluminum lake and the 1 mg tablet contains FD&C Blue No. 2 lake."
},
{
"NDCCode": "67046-0015-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0015-3) ",
"NDC11Code": "67046-0015-03",
"ProductNDC": "67046-0015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260424",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065256",
"LabelerName": "Coupler LLC",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "875",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260424",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. .",
"Description": "Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "67046-0038-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0038-3) ",
"NDC11Code": "67046-0038-03",
"ProductNDC": "67046-0038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201504",
"LabelerName": "Coupler LLC",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241218",
"SamplePackage": "N",
"IndicationAndUsage": "Quetiapine is an atypical antipsychotic indicated for the treatment of. · Schizophrenia ( 1.1). · Bipolar I disorder manic episodes ( 1.2). · Bipolar disorder, depressive episodes ( 1.2).",
"Description": "Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f] [1,4]thiazepin-11-yl-1-piperazinyl) ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets, USP is supplied for oral administration as 25 mg (round peach), 50 mg (round, white), 100 mg (round yellow), 150 mg (round, off white to light yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic dicalcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg, 150 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 150 mg tablet contains 172.70 mg of quetiapine fumarate USP equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.27 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.40 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.54 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine."
},
{
"NDCCode": "67046-0040-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0040-3) ",
"NDC11Code": "67046-0040-03",
"ProductNDC": "67046-0040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040715",
"LabelerName": "Coupler LLC",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260526",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).",
"Description": "Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "67046-0041-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0041-3) ",
"NDC11Code": "67046-0041-03",
"ProductNDC": "67046-0041",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260424",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040715",
"LabelerName": "Coupler LLC",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260424",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).",
"Description": "Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "67046-0053-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0053-3) ",
"NDC11Code": "67046-0053-03",
"ProductNDC": "67046-0053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol",
"NonProprietaryName": "Haloperidol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071173",
"LabelerName": "Coupler LLC",
"SubstanceName": "HALOPERIDOL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250702",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.",
"Description": "Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. C21H23ClFNO2375.87. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&C Red No. 40 Aluminum Lake."
},
{
"NDCCode": "67046-0057-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0057-3) ",
"NDC11Code": "67046-0057-03",
"ProductNDC": "67046-0057",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meloxicam",
"NonProprietaryName": "Meloxicam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MELOXICAM",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260427",
"SamplePackage": "N",
"IndicationAndUsage": "Meloxicam Tablets are non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥ 60 kg ( 1.3) .",
"Description": "Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each yellow meloxicam tablet contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula. Meloxicam, USP is a pale yellow powder, practically insoluble in water, slightly soluble in acetone, soluble in dimethylformamide, very slightly soluble in ethanol (96 %) and in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Each meloxicam tablet, USP intended for oral administration contains 7.5 mg or 15 mg of meloxicam. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium citrate dihydrate."
},
{
"NDCCode": "67046-0059-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0059-3) ",
"NDC11Code": "67046-0059-03",
"ProductNDC": "67046-0059",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260622",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Coupler LLC",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "32.4",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260622",
"SamplePackage": "N",
"IndicationAndUsage": "1. Sedative 2. Anticonvulsant - For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5- phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula:. C 12H 12N 2O 3 M.W. = 232.24 Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg, or 97.2 mg of phenobarbital, USP. Inactive ingredients include:colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and magnesium stearate."
},
{
"NDCCode": "67046-0060-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0060-3) ",
"NDC11Code": "67046-0060-03",
"ProductNDC": "67046-0060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naltrexone Hydrochloride",
"NonProprietaryName": "Naltrexone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260527",
"EndMarketingDate": "20271130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075274",
"LabelerName": "Coupler LLC",
"SubstanceName": "NALTREXONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20260527",
"EndMarketingDatePackage": "20271130",
"SamplePackage": "N",
"IndicationAndUsage": "Naltrexone Hydrochloride Tablets USP are indicated in the treatment of alcohol dependence and for the blockade of the effects of exogenously administered opioids. Naltrexone Hydrochloride Tablets USP have not been shown to provide any therapeutic benefit except as part of an appropriate plan of management for the addictions.",
"Description": "Naltrexone hydrochloride, an opioid antagonist, are a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5a)-. The structural formula is as follows. Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone Hydrochloride Tablets USP are available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride. Naltrexone Hydrochloride Tablets USP also contain: carnauba wax powder, colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide and yellow iron oxide."
},
{
"NDCCode": "67046-0068-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0068-3) ",
"NDC11Code": "67046-0068-03",
"ProductNDC": "67046-0068",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260427",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].",
"Description": "Mirtazapine tablets, USP contain mirtazapine USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino [2,1-a] pyrido [2,3-c][2] benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture:. Mirtazapine is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine USP, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine USP. Each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black, and iron oxide yellow."
},
{
"NDCCode": "67046-0072-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0072-3) ",
"NDC11Code": "67046-0072-03",
"ProductNDC": "67046-0072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202862",
"LabelerName": "Coupler LLC",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260619",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine is an atypical antipsychotic indicated. As oral formulation for the:. · Treatment of schizophrenia. ( 1.1). · Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. ( 14.1). · Adolescents (ages 13-17): Efficacy was established in one 6-week trial in patients with schizophrenia ( 14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.1). · Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. ( 1.2). · Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. ( 14.2). · Adolescents (ages 13-17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder ( 14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.2). · Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. ( 1.3). · Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. ( 1.2). · Efficacy was established in two 6-week clinical trials in adults ( 14.2). Maintenance efficacy has not been systematically evaluated. As Olanzapine and Fluoxetine in Combination for the: Treatment of depressive episodes associated with bipolar I disorder. ( 1.5) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax. Treatment of treatment resistant depression. ( 1.6) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.",
"Description": "Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg)."
},
{
"NDCCode": "67046-0113-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0113-3) ",
"NDC11Code": "67046-0113-03",
"ProductNDC": "67046-0113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078216",
"LabelerName": "Coupler LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260610",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .",
"Description": "Citalopram tablets, USP contain citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide, USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram, USP 10 mg tablets are film-coated, round shaped tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, oval shaped, scored tablets containing citalopram hydrobromide, in strengths equivalent to 20 mg or 40 mg citalopram base. The tablets also contain the following inactive ingredients: copovidone, corn starch, croscarmellose sodium, ferric oxide red, ferric oxide yellow, glycerin, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "67046-0127-3",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (67046-0127-3) ",
"NDC11Code": "67046-0127-03",
"ProductNDC": "67046-0127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064076",
"LabelerName": "Coupler LLC",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260504",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat.",
"Description": "Amoxicillin is a semisynthetic antibacterial, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[(R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4- thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Amoxicillin Capsules, USP. Each amoxicillin capsule, with yellow opaque cap and body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The 250 mg capsule is imprinted AMOX 250 on one side and GG 848 on the other side; the 500 mg capsule is imprinted AMOX 500 on one side and GG 849 on the other side. Inactive ingredients: Capsule shells - yellow ferric oxide, titanium dioxide, gelatin, black ferric oxide, shellac, propylene glycol, potassium hydroxide and ammonium hydroxide; Capsule contents - cellulose microcrystalline and magnesium stearate. Meets USP Dissolution Test 2. Amoxicillin Tablets, USP. Each film coated tablet contains 500 mg or 875 mg of amoxicillin as the trihydrate. The tablets are oval-shaped and white to yellowish. The 500 mg tablet is unscored, embossed GG-961 on one side and 500 on the other side. The 875 mg tablet is scored and embossed GG-962 on one side and 875 on the other side. In addition each amoxicillin tablet contains these inactive ingredients in each 500 mg or 875 mg tablet: colloidal silicon dioxide, crospovidone, ethylcellulose aqueous dispersion, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, triethyl citrate, and titanium dioxide. Amoxicillin for Oral Suspension, USP. Each 5 mL of reconstituted suspension contains 125 mg, 200 mg, 250 mg or 400 mg amoxicillin as the trihydrate. Each 5 mL of the 125 mg, 200 mg, 250 mg, and 400 mg reconstituted suspension contains 0.30 mEq (6.95 mg) of sodium. Amoxicillin trihydrate for oral suspension 125 mg/5 mL, 200 mg/5 mL, 250 mg/5 mL and 400 mg/5 mL are fruity flavored pink suspensions. Inactive ingredients: anhydrous citric acid, colloidal silicon dioxide, flavorings: raspberry, strawberry, refrachessement, FD&C Red 40, sodium benzoate, sodium citrate, sucrose, and xantham gum."
},
{
"NDCCode": "67046-0135-3",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (67046-0135-3) ",
"NDC11Code": "67046-0135-03",
"ProductNDC": "67046-0135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062396",
"LabelerName": "Coupler LLC",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260526",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline Hyclate Capsules, USP is an antibacterial drug synthetically derived from oxytetracycline. The structural formula of doxycycline hyclate is. with a molecular formula of (C 22H 24N 2O 8HCL) 2C 2H 6OH 2O and a molecular weight of 1025.88. The chemical designation for doxycycline is 2-Naphthacenecarboxamide, 4-(dimethylamino)-1, 4, 4a, 5, 5a, 6, -11, 12a-octahydro-3,5,10, 12, 12a-pentahydroxy-6-methyl-1, 11-dioxo-monohydrochloride, compound with ethanol(2:1), monohydrate, [4s-(4α, 4aα, 5α, 5aα, 6α, 12aα)]. Doxycycline is a yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. The 50 mg and 100 mg capsule shells contain: gelatin, FD&C Blue #1 and titanium dioxide. The printing ink may contain: Shellac Glaze, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, SD-45 Alcohol, FD&C Blue #2, FD&C Red #40, FD&C Blue #1, D&C Yellow #10."
},
{
"NDCCode": "67046-0154-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0154-3) ",
"NDC11Code": "67046-0154-03",
"ProductNDC": "67046-0154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203346",
"LabelerName": "Coupler LLC",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260429",
"SamplePackage": "N",
"IndicationAndUsage": "Alprazolam tablets are indicated for the: : 1 acute treatment of generalized anxiety disorder (GAD) in adults., 2 treatment of panic disorder (PD), with or without agoraphobia in adults.",
"Description": "Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam USP is a white to off-white, crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam tablet USP, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium 85% with sodium benzoate 15%, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition, the 0.5 mg tablet contains FD&C Yellow # 6 aluminum lake and the 1 mg tablet contains FD&C Blue No. 2 lake."
},
{
"NDCCode": "67046-0155-3",
"PackageDescription": "30 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-0155-3) ",
"NDC11Code": "67046-0155-03",
"ProductNDC": "67046-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20241106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202882",
"LabelerName": "Coupler LLC",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241106",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets are indicated for."
},
{
"NDCCode": "67046-0179-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0179-3) ",
"NDC11Code": "67046-0179-03",
"ProductNDC": "67046-0179",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxcarbazepine",
"NonProprietaryName": "Oxcarbazepine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260428",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077802",
"LabelerName": "Coupler LLC",
"SubstanceName": "OXCARBAZEPINE",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260428",
"SamplePackage": "N",
"IndicationAndUsage": "Oxcarbazepine tablets are indicated for use as monotherapy or adjunctive therapy in the treatment of partial-onset seizures in adults and as monotherapy in the treatment of partial-onset seizures in pediatric patients aged 4 years and above, and as adjunctive therapy in pediatric patients aged 2 years and above with partial-onset seizures.",
"Description": "Oxcarbazepine Tablets USP are an antiepileptic drug available as 150 mg, 300 mg, and 600 mg film-coated tablets for oral administration. Oxcarbazepine, USP is 10,11-Dihydro-10-oxo- 5H-dibenz[b, f]azepine-5-carboxamide, and its structural formula is:. Oxcarbazepine, USP is a light orange to creamish white or off-white powder. It is soluble in acetic acid, sparingly soluble in chloroform, practically insoluble in water. Its molecular weight is 252.27 g/mol. Oxcarbazepine film-coated tablets contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, ferric oxide (yellow), hypromellose, magnesium stearate, meglumine, microcrystalline cellulose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "67046-0186-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0186-3) ",
"NDC11Code": "67046-0186-03",
"ProductNDC": "67046-0186",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoclopramide",
"NonProprietaryName": "Metoclopramide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072801",
"LabelerName": "Coupler LLC",
"SubstanceName": "METOCLOPRAMIDE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260602",
"SamplePackage": "N",
"IndicationAndUsage": "Metoclopramide tablets are indicated for the: 1 Treatment for 4 to 12 weeks of symptomatic, documented gastroesophageal reflux in adults who fail to respond to conventional therapy., 2 Relief of symptoms in adults with acute and recurrent diabetic gastroparesis.",
"Description": "Metoclopramide hydrochloride, USP, the active ingredient of metoclopramide tablets, USP is a dopamine-2 receptor antagonist. Metoclopramide hydrochloride (metoclopramide monohydrochloride monohydrate) is a white or practically white, crystalline, odorless or practically odorless powder. It is very soluble in water, freely soluble in alcohol, sparingly soluble in chloroform and practically insoluble in ether. Chemically, it is 4-amino-5-chloro- N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. Its structural formula is as follows:. C 14H 22ClN 3O 2HClH 2O M.W. 354.3. Metoclopramide tablets, USP are for oral administration. Metoclopramide tablets, USP are available in 5 mg and 10 mg tablets. : 1 Each metoclopramide tablet USP, 5 mg contains 5 mg metoclopramide (equivalent to 5.91 mg of metoclopramide hydrochloride, USP)., 2 Each metoclopramide tablet USP, 10 mg contains 10 mg metoclopramide (equivalent to 11.82 mg of metoclopramide hydrochloride, USP)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67046-1078-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-1078-3) </PackageDescription>
<NDC11Code>67046-1078-03</NDC11Code>
<ProductNDC>67046-1078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077652</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated ( 1, 12.4). : 1 Pneumonia: Nosocomial ( 1.1) and Community Acquired ( 1.2, 1.3) , 2 Skin and Skin Structure Infections (SSSI): Complicated ( 1.4) and Uncomplicated ( 1.5) , 3 Chronic bacterial prostatitis ( 1.6) , 4 Inhalational Anthrax, Post-Exposure in adult and pediatric patients ( 1.7) , 5 Plague in adult and pediatric patients ( 1.8) , 6 Urinary Tract Infections (UTI): Complicated ( 1.9, 1.10) and Uncomplicated ( 1.12) , 7 Acute Pyelonephritis ( 1.11) , 8 Acute Bacterial Exacerbation of Chronic Bronchitis ( 1.13) , 9 Acute Bacterial Sinusitis ( 1.14) .</IndicationAndUsage>
<Description>Levofloxacin tablets are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1. The Chemical Structure of Levofloxacin. Its molecular formula is C 18H 20FN 3O 4 ½ H 2O and the molecular weight is 370.38. Levofloxacin, USP is a light yellowish–white to yellow–white crystals or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely solublein this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely solublein this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitrochelation potential has the following formation order:. Al +3> Cu +2> Zn +2> Mg +2> Ca +2. Each levofloxacin tablet, USP intended for oral administration contains levofloxacin hemihydrate equivalent to 250 mg or 500 mg or 750 mg of levofloxacin. In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, talc and titanium dioxide. The product meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>36987-1078-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1078-3)</PackageDescription>
<NDC11Code>36987-1078-03</NDC11Code>
<ProductNDC>36987-1078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hog Epithelium</ProprietaryName>
<NonProprietaryName>Hog Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>SUS SCROFA SKIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS],Non-Standardized Animal Skin Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1078-3</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (37662-1078-3) </PackageDescription>
<NDC11Code>37662-1078-03</NDC11Code>
<ProductNDC>37662-1078</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Manganum Aceticum</ProprietaryName>
<NonProprietaryName>Manganum Aceticum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220728</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>MANGANESE ACETATE TETRAHYDRATE</SubstanceName>
<StrengthNumber>12</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68745-1078-3</NDCCode>
<PackageDescription>.9 mL in 1 PACKET (68745-1078-3)</PackageDescription>
<NDC11Code>68745-1078-03</NDC11Code>
<ProductNDC>68745-1078</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Perfection Lumiere</ProprietaryName>
<ProprietaryNameSuffix>Long-wear Flawless Fluid Sunscreen Makeup Broad Spectrum Spf 15, 54 Beige Ambre</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120901</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>CHANEL PARFUMS BEAUTE</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>31</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-04-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>70771-1078-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70771-1078-3) </PackageDescription>
<NDC11Code>70771-1078-03</NDC11Code>
<ProductNDC>70771-1078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Felbamate</ProprietaryName>
<NonProprietaryName>Felbamate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208970</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>FELBAMATE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1078-3</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71335-1078-3) </PackageDescription>
<NDC11Code>71335-1078-03</NDC11Code>
<ProductNDC>71335-1078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202825</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)] : : 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets, USP contain sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C 17H 17NCl 2HCl is represented by the following structural formula:. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets, USP are supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate anhydrous, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Blue # 2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, iron oxide yellow (in 100 mg tablet), and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0093-1078-53</NDCCode>
<PackageDescription>50 TABLET, FILM COATED in 1 BOTTLE (0093-1078-53) </PackageDescription>
<NDC11Code>00093-1078-53</NDC11Code>
<ProductNDC>0093-1078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefprozil</ProprietaryName>
<NonProprietaryName>Cefprozil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065208</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CEFPROZIL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-03-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefprozil tablets are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Cefprozil, USP is a semi-synthetic broad-spectrum cephalosporin antibiotic. Cefprozil, USP is a cis and trans isomeric mixture (≥ 90% cis). The chemical name for the monohydrate is (6R,7R)-7-[(R)-2-amino-2-(p-hydroxyphenyl)acetamido]-8-oxo-3-propenyl-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid monohydrate, and the structural formula is. C18H19N3O5SH2O M.W. 407.45. Cefprozil, USP is a white to yellowish powder. Cefprozil Tablets USP are intended for oral administration. Cefprozil Tablets USP contain cefprozil, USP equivalent to 250 mg or 500 mg of anhydrous cefprozil. In addition, each tablet contains the following inactive ingredients: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide. The 250 mg tablets also contain D&C Yellow No. 10 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, and FD&C Yellow No. 6 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>0378-1078-93</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (0378-1078-93) </PackageDescription>
<NDC11Code>00378-1078-93</NDC11Code>
<ProductNDC>0378-1078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan And Amlodipine</ProprietaryName>
<NonProprietaryName>Telmisartan And Amlodipine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202516</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TELMISARTAN; AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>80; 10</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient's baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of < 140 mmHg (systolic) and 16% likelihood of achieving < 90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.</IndicationAndUsage>
<Description>Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets contain telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is a white or slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is chemically described as 4′-[[4-Methyl-6-(1-methyl-1H-benzimidazol-2yl)-2-propyl-1H-benzimidazol-1yl]methyl]biphenyl-2-carboxylic acid. Its molecular formula is C33H30N4O2 and its structural formula is:. Telmisartan and amlodipine tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-ethyl 5-methyl (4RS)-2-[(2-aminoethoxy) methyl]-4-(2-chlorophenyl)-6-methyl-1,4 dihydropyridine-3,5-dicarboxylate benzenesulfonate. Its molecular formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg and 80/10 mg. Telmisartan and amlodipine tablets also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue No. 1 Aluminum Lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, pregelatinized starch (corn) and sodium hydroxide. Telmisartan and amlodipine tablets are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets require protection from light. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>53808-1078-2</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BLISTER PACK (53808-1078-2)</PackageDescription>
<NDC11Code>53808-1078-02</NDC11Code>
<ProductNDC>53808-1078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Simvastatin</ProprietaryName>
<NonProprietaryName>Simvastatin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078034</ApplicationNumber>
<LabelerName>State of Florida DOH Central Pharmacy</LabelerName>
<SubstanceName>SIMVASTATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin can be started simultaneously with diet.</IndicationAndUsage>
<Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Tablets simvastatin for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: ascorbic acid, citric acid, hydroxypropyl cellulose, hypromellose, iron oxides, lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch (maize), talc, and titanium dioxide. Butylated hydroxyanisole is added as a preservative. Simvastatin 10mg, 20mg, and 40 mg contain red and yellow ferric oxide. Simvastatin 80 mg contains red ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-1078-1</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (54868-1078-1)</PackageDescription>
<NDC11Code>54868-1078-01</NDC11Code>
<ProductNDC>54868-1078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130627</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078494</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propranolol hydrochloride extended-release capsules are indicated in the management of hypertension. It may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride extended-release capsules are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
<Description>Propranolol hydrochloride, USP is a synthetic beta-adrenergic receptor-blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. Its molecular and structural formulae are. C16H21NO2·HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and ethanol. Its molecular weight is 295.80. Propranolol hydrochloride extended-release capsules are formulated to provide a sustained release of propranolol hydrochloride. Propranolol hydrochloride extended-release capsules are available as 60 mg, 80 mg, 120 mg, and 160 mg capsules for oral administration. The inactive ingredients contained in propranolol hydrochloride extended-release capsules are: ethylcellulose, gelatin, hydroxypropyl cellulose, povidone, sugar spheres, talc, titanium dioxide. In addition, the 60 mg and 80 mg capsule shells contain yellow iron oxide. The 120 mg capsule shells contain black iron oxide and yellow iron oxide. The 160 mg capsule shells contain black iron oxide. The ink ingredients are common for all strengths: Opacode S-1-8114 or Opacode S-1-8115 black contains: D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, pharmaceutical glaze, propylene glycol, and synthetic black iron oxide. This drug product complies with USP Drug Release Test 1.</Description>
</NDC>
<NDC>
<NDCCode>59262-600-30</NDCCode>
<PackageDescription>1078 GLOBULE in 1 BOTTLE, GLASS (59262-600-30)</PackageDescription>
<NDC11Code>59262-0600-30</NDC11Code>
<ProductNDC>59262-600</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Stress And Tension Relief</ProprietaryName>
<NonProprietaryName>Asafetida, Crataegus Fruit, Lycopus Virginicus And Passiflora Incarnata Flowering Top</NonProprietaryName>
<DosageFormName>GLOBULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130702</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Similasan Corporation</LabelerName>
<SubstanceName>ASAFETIDA; CRATAEGUS FRUIT; LYCOPUS VIRGINICUS; PASSIFLORA INCARNATA FLOWERING TOP</SubstanceName>
<StrengthNumber>4; 4; 3; 4</StrengthNumber>
<StrengthUnit>[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Relieves symptoms of stress and simple nervous tension-- inner tension with palpitations- inner tension with gastro-intestinal cramps and nervous constipation- nervous digestive disorders- nervous sleeplessness, general irritability and tension.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67046-0003-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0003-3) </PackageDescription>
<NDC11Code>67046-0003-03</NDC11Code>
<ProductNDC>67046-0003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67046-0007-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0007-3) </PackageDescription>
<NDC11Code>67046-0007-03</NDC11Code>
<ProductNDC>67046-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260505</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203346</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alprazolam tablets are indicated for the: : 1 acute treatment of generalized anxiety disorder (GAD) in adults., 2 treatment of panic disorder (PD), with or without agoraphobia in adults.</IndicationAndUsage>
<Description>Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam USP is a white to off-white, crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam tablet USP, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium 85% with sodium benzoate 15%, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition, the 0.5 mg tablet contains FD&C Yellow # 6 aluminum lake and the 1 mg tablet contains FD&C Blue No. 2 lake.</Description>
</NDC>
<NDC>
<NDCCode>67046-0015-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0015-3) </PackageDescription>
<NDC11Code>67046-0015-03</NDC11Code>
<ProductNDC>67046-0015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260424</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065256</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>875</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260424</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. .</IndicationAndUsage>
<Description>Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0038-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0038-3) </PackageDescription>
<NDC11Code>67046-0038-03</NDC11Code>
<ProductNDC>67046-0038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201504</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quetiapine is an atypical antipsychotic indicated for the treatment of. · Schizophrenia ( 1.1). · Bipolar I disorder manic episodes ( 1.2). · Bipolar disorder, depressive episodes ( 1.2).</IndicationAndUsage>
<Description>Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f] [1,4]thiazepin-11-yl-1-piperazinyl) ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets, USP is supplied for oral administration as 25 mg (round peach), 50 mg (round, white), 100 mg (round yellow), 150 mg (round, off white to light yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic dicalcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg, 150 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 150 mg tablet contains 172.70 mg of quetiapine fumarate USP equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.27 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.40 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.54 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine.</Description>
</NDC>
<NDC>
<NDCCode>67046-0040-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0040-3) </PackageDescription>
<NDC11Code>67046-0040-03</NDC11Code>
<ProductNDC>67046-0040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040715</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
<Description>Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>67046-0041-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0041-3) </PackageDescription>
<NDC11Code>67046-0041-03</NDC11Code>
<ProductNDC>67046-0041</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260424</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040715</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260424</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
<Description>Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>67046-0053-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0053-3) </PackageDescription>
<NDC11Code>67046-0053-03</NDC11Code>
<ProductNDC>67046-0053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol</ProprietaryName>
<NonProprietaryName>Haloperidol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071173</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>HALOPERIDOL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
<Description>Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. C21H23ClFNO2375.87. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&C Red No. 40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>67046-0057-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0057-3) </PackageDescription>
<NDC11Code>67046-0057-03</NDC11Code>
<ProductNDC>67046-0057</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meloxicam</ProprietaryName>
<NonProprietaryName>Meloxicam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MELOXICAM</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meloxicam Tablets are non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥ 60 kg ( 1.3) .</IndicationAndUsage>
<Description>Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each yellow meloxicam tablet contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula. Meloxicam, USP is a pale yellow powder, practically insoluble in water, slightly soluble in acetone, soluble in dimethylformamide, very slightly soluble in ethanol (96 %) and in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Each meloxicam tablet, USP intended for oral administration contains 7.5 mg or 15 mg of meloxicam. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium citrate dihydrate.</Description>
</NDC>
<NDC>
<NDCCode>67046-0059-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0059-3) </PackageDescription>
<NDC11Code>67046-0059-03</NDC11Code>
<ProductNDC>67046-0059</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260622</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>32.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1. Sedative 2. Anticonvulsant - For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5- phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula:. C 12H 12N 2O 3 M.W. = 232.24 Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg, or 97.2 mg of phenobarbital, USP. Inactive ingredients include:colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>67046-0060-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0060-3) </PackageDescription>
<NDC11Code>67046-0060-03</NDC11Code>
<ProductNDC>67046-0060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naltrexone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naltrexone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260527</StartMarketingDate>
<EndMarketingDate>20271130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075274</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>NALTREXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20260527</StartMarketingDatePackage>
<EndMarketingDatePackage>20271130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naltrexone Hydrochloride Tablets USP are indicated in the treatment of alcohol dependence and for the blockade of the effects of exogenously administered opioids. Naltrexone Hydrochloride Tablets USP have not been shown to provide any therapeutic benefit except as part of an appropriate plan of management for the addictions.</IndicationAndUsage>
<Description>Naltrexone hydrochloride, an opioid antagonist, are a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5a)-. The structural formula is as follows. Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone Hydrochloride Tablets USP are available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride. Naltrexone Hydrochloride Tablets USP also contain: carnauba wax powder, colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0068-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0068-3) </PackageDescription>
<NDC11Code>67046-0068-03</NDC11Code>
<ProductNDC>67046-0068</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Mirtazapine tablets, USP contain mirtazapine USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino [2,1-a] pyrido [2,3-c][2] benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture:. Mirtazapine is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine USP, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine USP. Each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black, and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>67046-0072-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0072-3) </PackageDescription>
<NDC11Code>67046-0072-03</NDC11Code>
<ProductNDC>67046-0072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202862</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine is an atypical antipsychotic indicated. As oral formulation for the:. · Treatment of schizophrenia. ( 1.1). · Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. ( 14.1). · Adolescents (ages 13-17): Efficacy was established in one 6-week trial in patients with schizophrenia ( 14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.1). · Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. ( 1.2). · Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. ( 14.2). · Adolescents (ages 13-17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder ( 14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.2). · Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. ( 1.3). · Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. ( 1.2). · Efficacy was established in two 6-week clinical trials in adults ( 14.2). Maintenance efficacy has not been systematically evaluated. As Olanzapine and Fluoxetine in Combination for the: Treatment of depressive episodes associated with bipolar I disorder. ( 1.5) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax. Treatment of treatment resistant depression. ( 1.6) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.</IndicationAndUsage>
<Description>Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg).</Description>
</NDC>
<NDC>
<NDCCode>67046-0113-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0113-3) </PackageDescription>
<NDC11Code>67046-0113-03</NDC11Code>
<ProductNDC>67046-0113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078216</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>Citalopram tablets, USP contain citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide, USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram, USP 10 mg tablets are film-coated, round shaped tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, oval shaped, scored tablets containing citalopram hydrobromide, in strengths equivalent to 20 mg or 40 mg citalopram base. The tablets also contain the following inactive ingredients: copovidone, corn starch, croscarmellose sodium, ferric oxide red, ferric oxide yellow, glycerin, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0127-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (67046-0127-3) </PackageDescription>
<NDC11Code>67046-0127-03</NDC11Code>
<ProductNDC>67046-0127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064076</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat.</IndicationAndUsage>
<Description>Amoxicillin is a semisynthetic antibacterial, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[(R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4- thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Amoxicillin Capsules, USP. Each amoxicillin capsule, with yellow opaque cap and body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The 250 mg capsule is imprinted AMOX 250 on one side and GG 848 on the other side; the 500 mg capsule is imprinted AMOX 500 on one side and GG 849 on the other side. Inactive ingredients: Capsule shells - yellow ferric oxide, titanium dioxide, gelatin, black ferric oxide, shellac, propylene glycol, potassium hydroxide and ammonium hydroxide; Capsule contents - cellulose microcrystalline and magnesium stearate. Meets USP Dissolution Test 2. Amoxicillin Tablets, USP. Each film coated tablet contains 500 mg or 875 mg of amoxicillin as the trihydrate. The tablets are oval-shaped and white to yellowish. The 500 mg tablet is unscored, embossed GG-961 on one side and 500 on the other side. The 875 mg tablet is scored and embossed GG-962 on one side and 875 on the other side. In addition each amoxicillin tablet contains these inactive ingredients in each 500 mg or 875 mg tablet: colloidal silicon dioxide, crospovidone, ethylcellulose aqueous dispersion, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, triethyl citrate, and titanium dioxide. Amoxicillin for Oral Suspension, USP. Each 5 mL of reconstituted suspension contains 125 mg, 200 mg, 250 mg or 400 mg amoxicillin as the trihydrate. Each 5 mL of the 125 mg, 200 mg, 250 mg, and 400 mg reconstituted suspension contains 0.30 mEq (6.95 mg) of sodium. Amoxicillin trihydrate for oral suspension 125 mg/5 mL, 200 mg/5 mL, 250 mg/5 mL and 400 mg/5 mL are fruity flavored pink suspensions. Inactive ingredients: anhydrous citric acid, colloidal silicon dioxide, flavorings: raspberry, strawberry, refrachessement, FD&C Red 40, sodium benzoate, sodium citrate, sucrose, and xantham gum.</Description>
</NDC>
<NDC>
<NDCCode>67046-0135-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (67046-0135-3) </PackageDescription>
<NDC11Code>67046-0135-03</NDC11Code>
<ProductNDC>67046-0135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062396</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline Hyclate Capsules, USP is an antibacterial drug synthetically derived from oxytetracycline. The structural formula of doxycycline hyclate is. with a molecular formula of (C 22H 24N 2O 8HCL) 2C 2H 6OH 2O and a molecular weight of 1025.88. The chemical designation for doxycycline is 2-Naphthacenecarboxamide, 4-(dimethylamino)-1, 4, 4a, 5, 5a, 6, -11, 12a-octahydro-3,5,10, 12, 12a-pentahydroxy-6-methyl-1, 11-dioxo-monohydrochloride, compound with ethanol(2:1), monohydrate, [4s-(4α, 4aα, 5α, 5aα, 6α, 12aα)]. Doxycycline is a yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. The 50 mg and 100 mg capsule shells contain: gelatin, FD&C Blue #1 and titanium dioxide. The printing ink may contain: Shellac Glaze, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, SD-45 Alcohol, FD&C Blue #2, FD&C Red #40, FD&C Blue #1, D&C Yellow #10.</Description>
</NDC>
<NDC>
<NDCCode>67046-0154-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0154-3) </PackageDescription>
<NDC11Code>67046-0154-03</NDC11Code>
<ProductNDC>67046-0154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203346</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alprazolam tablets are indicated for the: : 1 acute treatment of generalized anxiety disorder (GAD) in adults., 2 treatment of panic disorder (PD), with or without agoraphobia in adults.</IndicationAndUsage>
<Description>Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam USP is a white to off-white, crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam tablet USP, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium 85% with sodium benzoate 15%, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition, the 0.5 mg tablet contains FD&C Yellow # 6 aluminum lake and the 1 mg tablet contains FD&C Blue No. 2 lake.</Description>
</NDC>
<NDC>
<NDCCode>67046-0155-3</NDCCode>
<PackageDescription>30 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-0155-3) </PackageDescription>
<NDC11Code>67046-0155-03</NDC11Code>
<ProductNDC>67046-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202882</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets are indicated for.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67046-0179-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0179-3) </PackageDescription>
<NDC11Code>67046-0179-03</NDC11Code>
<ProductNDC>67046-0179</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxcarbazepine</ProprietaryName>
<NonProprietaryName>Oxcarbazepine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260428</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077802</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>OXCARBAZEPINE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260428</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxcarbazepine tablets are indicated for use as monotherapy or adjunctive therapy in the treatment of partial-onset seizures in adults and as monotherapy in the treatment of partial-onset seizures in pediatric patients aged 4 years and above, and as adjunctive therapy in pediatric patients aged 2 years and above with partial-onset seizures.</IndicationAndUsage>
<Description>Oxcarbazepine Tablets USP are an antiepileptic drug available as 150 mg, 300 mg, and 600 mg film-coated tablets for oral administration. Oxcarbazepine, USP is 10,11-Dihydro-10-oxo- 5H-dibenz[b, f]azepine-5-carboxamide, and its structural formula is:. Oxcarbazepine, USP is a light orange to creamish white or off-white powder. It is soluble in acetic acid, sparingly soluble in chloroform, practically insoluble in water. Its molecular weight is 252.27 g/mol. Oxcarbazepine film-coated tablets contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, ferric oxide (yellow), hypromellose, magnesium stearate, meglumine, microcrystalline cellulose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0186-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0186-3) </PackageDescription>
<NDC11Code>67046-0186-03</NDC11Code>
<ProductNDC>67046-0186</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoclopramide</ProprietaryName>
<NonProprietaryName>Metoclopramide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072801</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>METOCLOPRAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoclopramide tablets are indicated for the: 1 Treatment for 4 to 12 weeks of symptomatic, documented gastroesophageal reflux in adults who fail to respond to conventional therapy., 2 Relief of symptoms in adults with acute and recurrent diabetic gastroparesis.</IndicationAndUsage>
<Description>Metoclopramide hydrochloride, USP, the active ingredient of metoclopramide tablets, USP is a dopamine-2 receptor antagonist. Metoclopramide hydrochloride (metoclopramide monohydrochloride monohydrate) is a white or practically white, crystalline, odorless or practically odorless powder. It is very soluble in water, freely soluble in alcohol, sparingly soluble in chloroform and practically insoluble in ether. Chemically, it is 4-amino-5-chloro- N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. Its structural formula is as follows:. C 14H 22ClN 3O 2HClH 2O M.W. 354.3. Metoclopramide tablets, USP are for oral administration. Metoclopramide tablets, USP are available in 5 mg and 10 mg tablets. : 1 Each metoclopramide tablet USP, 5 mg contains 5 mg metoclopramide (equivalent to 5.91 mg of metoclopramide hydrochloride, USP)., 2 Each metoclopramide tablet USP, 10 mg contains 10 mg metoclopramide (equivalent to 11.82 mg of metoclopramide hydrochloride, USP).</Description>
</NDC>
</NDCList>