{
"NDC": [
{
"NDCCode": "67046-1121-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-1121-3) ",
"NDC11Code": "67046-1121-03",
"ProductNDC": "67046-1121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium",
"NonProprietaryName": "Losartan Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20241108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091497",
"LabelerName": "Coupler LLC",
"SubstanceName": "LOSARTAN POTASSIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241108",
"SamplePackage": "N",
"IndicationAndUsage": "Losartan potassium is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. ( 1.2) , 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. ( 1.3) .",
"Description": "Losartan potassium is an angiotensin II receptor blocker acting on the AT 1receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C 22H 22ClKN 6O, and its structural formula is:. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP, and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, and titanium dioxide. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg, contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively. Losartan potassium tablets USP, 25 mg and 50 mg meet USP Dissolution Test 1 and Losartan potassium tablets USP, 100 mg meet USP Dissolution Test 3."
},
{
"NDCCode": "36987-1121-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1121-3)",
"NDC11Code": "36987-1121-03",
"ProductNDC": "36987-1121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Cat Hair",
"NonProprietaryName": "Standardized Cat Hair",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920929",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103384",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "FELIS CATUS HAIR",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Animal Hair Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dander [CS],Allergens [CS],Salivary Proteins and Peptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Cat Hair is intended for use in the diagnosis and therapy of cat allergy patients as established by allergy history and skin test reactivity.",
"Description": "Standardized cat hair extract is a sterile glycerinated injectable solution containing the extractables of dried, powdered cat hair, wash and dander and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, water for injection and 0.4%, phenol as preservative in sterile containers. All extracts are aseptically filled. Standardized cat hair extract is to be administered by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injections. The Bioequivalent Allergy Unit (BAU) nomenclature, now used for all Standardized Cat Extracts, replaces the previous Allergy Unit (AU) nomenclature for these products. Bioequivalent Allergy Units are based on quantitative intradermal skin test results and are intended to assure that the labeled unit of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted to one half million fold to produce an intradermal sum of erythema diameter response of 50 mm in highly puncture reactive subjects. In vitro assignment of BAU/mL to this product is based on radial immunodiffusion (RID) assay results according to guidelines established by the Center for Biologics Evaluation and Research (CBER) as indicated below.(5, 6). Bioequivalent Allergy Units (BAU) are NOT interchangeable with Allergy Units (AU). Standardized Cat Hair extract labeled in BAU/mL are not interchangeable with standardized cat pelt extracts or with cat hair extracts labeled in AU/mL or with non-standardized cat hair extracts. It has been recognized through investigation that the allergens responsible for Cat allergy are found in the pelt, hair, dander, saliva, serum and urine.(1) Saliva especially when deposited on and in combination with the hair, root hairs and skin can produce a significant allergic reaction. Repeated surface washing of the animal proved significant enough so that the wash was added to the whole of the raw material producing the cat allergenic extract.(2,3,4) However the amount of Fel d 1 varies widely from animal to animal so it is an advantage to use raw material with a known amount of the antigen. Nelco's raw material, supplied by Biopol Laboratory, is dried, powdered cat hair, wash and dander, labeled with the number of Fel d 1 units in each gram of dried material per container. The raw material is extracted with a 50%(v/v) glycerinated diluent containing glycerin and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI, and 0.4% phenol as a preservative. Although extracts from whole pelts of cats are similar in content of Fel d 1 to extracts prepared only from wash, hair and dander, pelt extracts may contain other non-Fel d 1 allergenic molecules."
},
{
"NDCCode": "37662-1121-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-1121-3) ",
"NDC11Code": "37662-1121-03",
"ProductNDC": "37662-1121",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cobaltum Phosphoricum",
"NonProprietaryName": "Cobaltum Phosphoricum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220729",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "COBALTOUS PHOSPHATE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2022-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220729",
"SamplePackage": "N"
},
{
"NDCCode": "67296-1121-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (67296-1121-3) ",
"NDC11Code": "67296-1121-03",
"ProductNDC": "67296-1121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075511",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.",
"Description": "The active ingredient in Famotidine Tablets USP is a histamine-2 (H 2) receptor antagonist. Famotidine, USP is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio] propylidene] sulfamide and has the following structural formula:. C 8H 15N 7O 2S 3 M.W. 337.45. Each Famotidine Tablet USP for oral administration contains either 20 mg or 40 mg of famotidine, USP and has the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized corn starch, sodium starch glycolate, talc, titanium dioxide, yellow iron oxide. In addition the 20 mg contains lactose monohydrate, red iron oxide and triacetin and the 40 mg contains FD&C blue No. 2 aluminum lake and FD&C yellow No. 6 aluminum lake. Famotidine, USP is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol."
},
{
"NDCCode": "71335-1121-3",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (71335-1121-3) ",
"NDC11Code": "71335-1121-03",
"ProductNDC": "71335-1121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040600",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190307",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-( p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. C21H27CIN2O2·2HCl. M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include carnauba wax, colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, D&C Yellow #10 Aluminum Lake (25 mg and 50 mg), FD&C Blue #2 Aluminum Lake (25 mg), FD&C Red #40 Aluminum Lake (50 mg), FD&C Yellow #6 Aluminum Lake (10 mg and 50 mg), hypromellose, polyethylene glycol 3350, polyvinyl alcohol, talc, titanium dioxide, triacetin and yellow iron oxide (10 mg)."
},
{
"NDCCode": "79718-1121-3",
"PackageDescription": "15 mL in 1 BOTTLE (79718-1121-3) ",
"NDC11Code": "79718-1121-03",
"ProductNDC": "79718-1121",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Arnica Montana",
"NonProprietaryName": "Arnica Montana",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20201113",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Warsan Homeopathic",
"SubstanceName": "ARNICA MONTANA",
"StrengthNumber": "1000",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20201113",
"SamplePackage": "N",
"IndicationAndUsage": "Temporary relief from muscle pain, injuries, bruises."
},
{
"NDCCode": "85512-1121-3",
"PackageDescription": "10 g in 1 BOTTLE (85512-1121-3) ",
"NDC11Code": "85512-1121-03",
"ProductNDC": "85512-1121",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Dulaglutide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20250602",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Qingdao Qinzeyuan Biotechnology Co., Ltd",
"SubstanceName": "DULAGLUTIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "02-JUN-25"
},
{
"NDCCode": "0363-1121-03",
"PackageDescription": "89 mL in 1 TUBE (0363-1121-03) ",
"NDC11Code": "00363-1121-03",
"ProductNDC": "0363-1121",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hydrating Spf 50",
"NonProprietaryName": "Avobenzone 3% Homosalate 15% Octisalate 5% Octocrylene 10%",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20161116",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Walgreens",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "3; 15; 5; 10",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20161116",
"SamplePackage": "N",
"IndicationAndUsage": "Uses helps prevent sunburn higher SPF gives more sunburnprotection retains SPF after 80 minutes of activity in the water orsweating provides high protection against sunburn."
},
{
"NDCCode": "0363-1121-06",
"PackageDescription": "236 mL in 1 CAN (0363-1121-06) ",
"NDC11Code": "00363-1121-06",
"ProductNDC": "0363-1121",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hydrating Spf 50",
"NonProprietaryName": "Avobenzone 3% Homosalate 15% Octisalate 5% Octocrylene 10%",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20161116",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Walgreens",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "3; 15; 5; 10",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20161116",
"SamplePackage": "N",
"IndicationAndUsage": "Uses helps prevent sunburn higher SPF gives more sunburnprotection retains SPF after 80 minutes of activity in the water orsweating provides high protection against sunburn."
},
{
"NDCCode": "0363-1121-07",
"PackageDescription": "296 mL in 1 TUBE (0363-1121-07) ",
"NDC11Code": "00363-1121-07",
"ProductNDC": "0363-1121",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hydrating Spf 50",
"NonProprietaryName": "Avobenzone 3% Homosalate 15% Octisalate 5% Octocrylene 10%",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20161116",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Walgreens",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "3; 15; 5; 10",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20161116",
"SamplePackage": "N",
"IndicationAndUsage": "Uses helps prevent sunburn higher SPF gives more sunburnprotection retains SPF after 80 minutes of activity in the water orsweating provides high protection against sunburn."
},
{
"NDCCode": "0832-1121-42",
"PackageDescription": "2 BOTTLE, PUMP in 1 CARTON (0832-1121-42) / 60 GEL, METERED in 1 BOTTLE, PUMP (0832-1121-40) ",
"NDC11Code": "00832-1121-42",
"ProductNDC": "0832-1121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Testosterone",
"NonProprietaryName": "Testosterone",
"DosageFormName": "GEL, METERED",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140616",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA204399",
"LabelerName": "Upsher-Smith Laboratories, LLC",
"SubstanceName": "TESTOSTERONE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2025-07-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140616",
"SamplePackage": "N",
"IndicationAndUsage": "Testosterone gel is indicated for replacement therapy in adult males for conditions associated with a deficiency or absence of endogenous testosterone: 1 Primary hypogonadism (congenital or acquired): testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome, orchiectomy, Klinefelter's syndrome, chemotherapy, or toxic damage from alcohol or heavy metals. These men usually have low serum testosterone levels and gonadotropins (follicle-stimulating hormone [FSH], luteinizing hormone [LH]) above the normal range., 2 Hypogonadotropic hypogonadism (congenital or acquired): gonadotropin or luteinizing hormone-releasing hormone (LHRH) deficiency or pituitary-hypothalamic injury from tumors, trauma, or radiation. These men have low testosterone serum levels but have gonadotropins in the normal or low range.",
"Description": "Testosterone gel, for topical use is a clear to translucent hydroalcoholic topical gel containing testosterone, an androgen. Testosterone gel provides continuous transdermal delivery of testosterone for 24 hours, following a single application to intact, clean, dry skin of the shoulders and/or upper arms. Testosterone gel is available in unit-dose tubes, unit-dose packets, and a metered-dose pump. One 5-g or two 5-g tubes/packets of testosterone gel contains 50 mg or 100 mg of testosterone, respectively. One pump actuation dispenses 1.25 g of gel, which contains 12.5 mg of testosterone. Four pump actuations or eight pump actuations contain 50 mg or 100 mg of testosterone, respectively. Each metered-dose pump container is capable of dispensing 60 pump actuations. The active pharmacological ingredient in testosterone gel is testosterone. Testosterone USP is a white to practically white crystalline powder chemically described as 17-β hydroxyandrost-4-en-3-one. The structural formula is shown in the following figure. Inactive ingredients in testosterone gel are carbomer copolymer Type B, carbomer homopolymer Type C, diisopropyl adipate, ethyl alcohol, glycerin, methyl laurate, oleyl alcohol, polyethylene glycol, propylene glycol, purified water, and tromethamine."
},
{
"NDCCode": "36987-1121-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-1121-1)",
"NDC11Code": "36987-1121-01",
"ProductNDC": "36987-1121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Cat Hair",
"NonProprietaryName": "Standardized Cat Hair",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920929",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103384",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "FELIS CATUS HAIR",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Animal Hair Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dander [CS],Allergens [CS],Salivary Proteins and Peptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Cat Hair is intended for use in the diagnosis and therapy of cat allergy patients as established by allergy history and skin test reactivity.",
"Description": "Standardized cat hair extract is a sterile glycerinated injectable solution containing the extractables of dried, powdered cat hair, wash and dander and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, water for injection and 0.4%, phenol as preservative in sterile containers. All extracts are aseptically filled. Standardized cat hair extract is to be administered by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injections. The Bioequivalent Allergy Unit (BAU) nomenclature, now used for all Standardized Cat Extracts, replaces the previous Allergy Unit (AU) nomenclature for these products. Bioequivalent Allergy Units are based on quantitative intradermal skin test results and are intended to assure that the labeled unit of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted to one half million fold to produce an intradermal sum of erythema diameter response of 50 mm in highly puncture reactive subjects. In vitro assignment of BAU/mL to this product is based on radial immunodiffusion (RID) assay results according to guidelines established by the Center for Biologics Evaluation and Research (CBER) as indicated below.(5, 6). Bioequivalent Allergy Units (BAU) are NOT interchangeable with Allergy Units (AU). Standardized Cat Hair extract labeled in BAU/mL are not interchangeable with standardized cat pelt extracts or with cat hair extracts labeled in AU/mL or with non-standardized cat hair extracts. It has been recognized through investigation that the allergens responsible for Cat allergy are found in the pelt, hair, dander, saliva, serum and urine.(1) Saliva especially when deposited on and in combination with the hair, root hairs and skin can produce a significant allergic reaction. Repeated surface washing of the animal proved significant enough so that the wash was added to the whole of the raw material producing the cat allergenic extract.(2,3,4) However the amount of Fel d 1 varies widely from animal to animal so it is an advantage to use raw material with a known amount of the antigen. Nelco's raw material, supplied by Biopol Laboratory, is dried, powdered cat hair, wash and dander, labeled with the number of Fel d 1 units in each gram of dried material per container. The raw material is extracted with a 50%(v/v) glycerinated diluent containing glycerin and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI, and 0.4% phenol as a preservative. Although extracts from whole pelts of cats are similar in content of Fel d 1 to extracts prepared only from wash, hair and dander, pelt extracts may contain other non-Fel d 1 allergenic molecules."
},
{
"NDCCode": "36987-1121-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1121-2)",
"NDC11Code": "36987-1121-02",
"ProductNDC": "36987-1121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Cat Hair",
"NonProprietaryName": "Standardized Cat Hair",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920929",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103384",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "FELIS CATUS HAIR",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Animal Hair Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dander [CS],Allergens [CS],Salivary Proteins and Peptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Cat Hair is intended for use in the diagnosis and therapy of cat allergy patients as established by allergy history and skin test reactivity.",
"Description": "Standardized cat hair extract is a sterile glycerinated injectable solution containing the extractables of dried, powdered cat hair, wash and dander and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, water for injection and 0.4%, phenol as preservative in sterile containers. All extracts are aseptically filled. Standardized cat hair extract is to be administered by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injections. The Bioequivalent Allergy Unit (BAU) nomenclature, now used for all Standardized Cat Extracts, replaces the previous Allergy Unit (AU) nomenclature for these products. Bioequivalent Allergy Units are based on quantitative intradermal skin test results and are intended to assure that the labeled unit of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted to one half million fold to produce an intradermal sum of erythema diameter response of 50 mm in highly puncture reactive subjects. In vitro assignment of BAU/mL to this product is based on radial immunodiffusion (RID) assay results according to guidelines established by the Center for Biologics Evaluation and Research (CBER) as indicated below.(5, 6). Bioequivalent Allergy Units (BAU) are NOT interchangeable with Allergy Units (AU). Standardized Cat Hair extract labeled in BAU/mL are not interchangeable with standardized cat pelt extracts or with cat hair extracts labeled in AU/mL or with non-standardized cat hair extracts. It has been recognized through investigation that the allergens responsible for Cat allergy are found in the pelt, hair, dander, saliva, serum and urine.(1) Saliva especially when deposited on and in combination with the hair, root hairs and skin can produce a significant allergic reaction. Repeated surface washing of the animal proved significant enough so that the wash was added to the whole of the raw material producing the cat allergenic extract.(2,3,4) However the amount of Fel d 1 varies widely from animal to animal so it is an advantage to use raw material with a known amount of the antigen. Nelco's raw material, supplied by Biopol Laboratory, is dried, powdered cat hair, wash and dander, labeled with the number of Fel d 1 units in each gram of dried material per container. The raw material is extracted with a 50%(v/v) glycerinated diluent containing glycerin and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI, and 0.4% phenol as a preservative. Although extracts from whole pelts of cats are similar in content of Fel d 1 to extracts prepared only from wash, hair and dander, pelt extracts may contain other non-Fel d 1 allergenic molecules."
},
{
"NDCCode": "36987-1121-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-1121-4)",
"NDC11Code": "36987-1121-04",
"ProductNDC": "36987-1121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Cat Hair",
"NonProprietaryName": "Standardized Cat Hair",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920929",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103384",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "FELIS CATUS HAIR",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Animal Hair Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dander [CS],Allergens [CS],Salivary Proteins and Peptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Cat Hair is intended for use in the diagnosis and therapy of cat allergy patients as established by allergy history and skin test reactivity.",
"Description": "Standardized cat hair extract is a sterile glycerinated injectable solution containing the extractables of dried, powdered cat hair, wash and dander and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, water for injection and 0.4%, phenol as preservative in sterile containers. All extracts are aseptically filled. Standardized cat hair extract is to be administered by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injections. The Bioequivalent Allergy Unit (BAU) nomenclature, now used for all Standardized Cat Extracts, replaces the previous Allergy Unit (AU) nomenclature for these products. Bioequivalent Allergy Units are based on quantitative intradermal skin test results and are intended to assure that the labeled unit of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted to one half million fold to produce an intradermal sum of erythema diameter response of 50 mm in highly puncture reactive subjects. In vitro assignment of BAU/mL to this product is based on radial immunodiffusion (RID) assay results according to guidelines established by the Center for Biologics Evaluation and Research (CBER) as indicated below.(5, 6). Bioequivalent Allergy Units (BAU) are NOT interchangeable with Allergy Units (AU). Standardized Cat Hair extract labeled in BAU/mL are not interchangeable with standardized cat pelt extracts or with cat hair extracts labeled in AU/mL or with non-standardized cat hair extracts. It has been recognized through investigation that the allergens responsible for Cat allergy are found in the pelt, hair, dander, saliva, serum and urine.(1) Saliva especially when deposited on and in combination with the hair, root hairs and skin can produce a significant allergic reaction. Repeated surface washing of the animal proved significant enough so that the wash was added to the whole of the raw material producing the cat allergenic extract.(2,3,4) However the amount of Fel d 1 varies widely from animal to animal so it is an advantage to use raw material with a known amount of the antigen. Nelco's raw material, supplied by Biopol Laboratory, is dried, powdered cat hair, wash and dander, labeled with the number of Fel d 1 units in each gram of dried material per container. The raw material is extracted with a 50%(v/v) glycerinated diluent containing glycerin and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI, and 0.4% phenol as a preservative. Although extracts from whole pelts of cats are similar in content of Fel d 1 to extracts prepared only from wash, hair and dander, pelt extracts may contain other non-Fel d 1 allergenic molecules."
},
{
"NDCCode": "53808-1121-1",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (53808-1121-1) ",
"NDC11Code": "53808-1121-01",
"ProductNDC": "53808-1121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hydrochloride",
"NonProprietaryName": "Ondansetron Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078539",
"LabelerName": "DOH CENTRAL PHARMACY",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20170914",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. : 1 highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2, 2 initial and repeat courses of moderately emetogenic cancer chemotherapy, 3 radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen.",
"Description": "The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6."
},
{
"NDCCode": "54973-1121-1",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (54973-1121-1) > 50 TABLET in 1 BOTTLE, PLASTIC",
"NDC11Code": "54973-1121-01",
"ProductNDC": "54973-1121",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Calms Forte",
"NonProprietaryName": "Avena Sativa Flowering Top, Chamomile, Humulus Lupulus Stem, Passiflora Incarnata Flower, Calcium Phosphate, Ferrosoferric Phosphate, Potassium Phosphate, Dibasic, Sodium Phosphate, And Magnesium Phosphate, Dibasic Trihydrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19601001",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hyland's",
"SubstanceName": "AVENA SATIVA FLOWERING TOP; CHAMOMILE; HUMULUS LUPULUS STEM; PASSIFLORA INCARNATA FLOWER; CALCIUM PHOSPHATE; FERROSOFERRIC PHOSPHATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM PHOSPHATE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE",
"StrengthNumber": "1; 2; 1; 1; 3; 3; 3; 3; 3",
"StrengthUnit": "[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2017-12-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "54973-1121-2",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (54973-1121-2) > 100 TABLET in 1 BOTTLE, PLASTIC",
"NDC11Code": "54973-1121-02",
"ProductNDC": "54973-1121",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Calms Forte",
"NonProprietaryName": "Avena Sativa Flowering Top, Chamomile, Humulus Lupulus Stem, Passiflora Incarnata Flower, Calcium Phosphate, Ferrosoferric Phosphate, Potassium Phosphate, Dibasic, Sodium Phosphate, And Magnesium Phosphate, Dibasic Trihydrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19601001",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hyland's",
"SubstanceName": "AVENA SATIVA FLOWERING TOP; CHAMOMILE; HUMULUS LUPULUS STEM; PASSIFLORA INCARNATA FLOWER; CALCIUM PHOSPHATE; FERROSOFERRIC PHOSPHATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM PHOSPHATE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE",
"StrengthNumber": "1; 2; 1; 1; 3; 3; 3; 3; 3",
"StrengthUnit": "[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2017-12-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "54973-1121-4",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (54973-1121-4) > 250 TABLET in 1 BOTTLE, PLASTIC",
"NDC11Code": "54973-1121-04",
"ProductNDC": "54973-1121",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Calms Forte",
"NonProprietaryName": "Avena Sativa Flowering Top, Chamomile, Humulus Lupulus Stem, Passiflora Incarnata Flower, Calcium Phosphate, Ferrosoferric Phosphate, Potassium Phosphate, Dibasic, Sodium Phosphate, And Magnesium Phosphate, Dibasic Trihydrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19601001",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hyland's",
"SubstanceName": "AVENA SATIVA FLOWERING TOP; CHAMOMILE; HUMULUS LUPULUS STEM; PASSIFLORA INCARNATA FLOWER; CALCIUM PHOSPHATE; FERROSOFERRIC PHOSPHATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM PHOSPHATE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE",
"StrengthNumber": "1; 2; 1; 1; 3; 3; 3; 3; 3",
"StrengthUnit": "[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2017-12-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "54973-1121-5",
"PackageDescription": "4 TABLET in 1 POUCH (54973-1121-5)",
"NDC11Code": "54973-1121-05",
"ProductNDC": "54973-1121",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Calms Forte",
"NonProprietaryName": "Avena Sativa Flowering Top, Chamomile, Humulus Lupulus Stem, Passiflora Incarnata Flower, Calcium Phosphate, Ferrosoferric Phosphate, Potassium Phosphate, Dibasic, Sodium Phosphate, And Magnesium Phosphate, Dibasic Trihydrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19601001",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hyland's",
"SubstanceName": "AVENA SATIVA FLOWERING TOP; CHAMOMILE; HUMULUS LUPULUS STEM; PASSIFLORA INCARNATA FLOWER; CALCIUM PHOSPHATE; FERROSOFERRIC PHOSPHATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM PHOSPHATE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE",
"StrengthNumber": "1; 2; 1; 1; 3; 3; 3; 3; 3",
"StrengthUnit": "[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2017-12-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "67046-0003-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0003-3) ",
"NDC11Code": "67046-0003-03",
"ProductNDC": "67046-0003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20241218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241218",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)]."
},
{
"NDCCode": "67046-0007-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0007-3) ",
"NDC11Code": "67046-0007-03",
"ProductNDC": "67046-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260505",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203346",
"LabelerName": "Coupler LLC",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260505",
"SamplePackage": "N",
"IndicationAndUsage": "Alprazolam tablets are indicated for the: : 1 acute treatment of generalized anxiety disorder (GAD) in adults., 2 treatment of panic disorder (PD), with or without agoraphobia in adults.",
"Description": "Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam USP is a white to off-white, crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam tablet USP, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium 85% with sodium benzoate 15%, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition, the 0.5 mg tablet contains FD&C Yellow # 6 aluminum lake and the 1 mg tablet contains FD&C Blue No. 2 lake."
},
{
"NDCCode": "67046-0015-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0015-3) ",
"NDC11Code": "67046-0015-03",
"ProductNDC": "67046-0015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260424",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065256",
"LabelerName": "Coupler LLC",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "875",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260424",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. .",
"Description": "Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "67046-0038-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0038-3) ",
"NDC11Code": "67046-0038-03",
"ProductNDC": "67046-0038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201504",
"LabelerName": "Coupler LLC",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241218",
"SamplePackage": "N",
"IndicationAndUsage": "Quetiapine is an atypical antipsychotic indicated for the treatment of. · Schizophrenia ( 1.1). · Bipolar I disorder manic episodes ( 1.2). · Bipolar disorder, depressive episodes ( 1.2).",
"Description": "Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f] [1,4]thiazepin-11-yl-1-piperazinyl) ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets, USP is supplied for oral administration as 25 mg (round peach), 50 mg (round, white), 100 mg (round yellow), 150 mg (round, off white to light yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic dicalcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg, 150 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 150 mg tablet contains 172.70 mg of quetiapine fumarate USP equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.27 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.40 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.54 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine."
},
{
"NDCCode": "67046-0040-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0040-3) ",
"NDC11Code": "67046-0040-03",
"ProductNDC": "67046-0040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040715",
"LabelerName": "Coupler LLC",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260526",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).",
"Description": "Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "67046-0041-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0041-3) ",
"NDC11Code": "67046-0041-03",
"ProductNDC": "67046-0041",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260424",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040715",
"LabelerName": "Coupler LLC",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260424",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).",
"Description": "Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "67046-0053-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0053-3) ",
"NDC11Code": "67046-0053-03",
"ProductNDC": "67046-0053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol",
"NonProprietaryName": "Haloperidol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071173",
"LabelerName": "Coupler LLC",
"SubstanceName": "HALOPERIDOL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250702",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.",
"Description": "Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. C21H23ClFNO2375.87. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&C Red No. 40 Aluminum Lake."
},
{
"NDCCode": "67046-0057-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0057-3) ",
"NDC11Code": "67046-0057-03",
"ProductNDC": "67046-0057",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meloxicam",
"NonProprietaryName": "Meloxicam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MELOXICAM",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260427",
"SamplePackage": "N",
"IndicationAndUsage": "Meloxicam Tablets are non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥ 60 kg ( 1.3) .",
"Description": "Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each yellow meloxicam tablet contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula. Meloxicam, USP is a pale yellow powder, practically insoluble in water, slightly soluble in acetone, soluble in dimethylformamide, very slightly soluble in ethanol (96 %) and in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Each meloxicam tablet, USP intended for oral administration contains 7.5 mg or 15 mg of meloxicam. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium citrate dihydrate."
},
{
"NDCCode": "67046-0059-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0059-3) ",
"NDC11Code": "67046-0059-03",
"ProductNDC": "67046-0059",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260622",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Coupler LLC",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "32.4",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260622",
"SamplePackage": "N",
"IndicationAndUsage": "1. Sedative 2. Anticonvulsant - For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5- phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula:. C 12H 12N 2O 3 M.W. = 232.24 Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg, or 97.2 mg of phenobarbital, USP. Inactive ingredients include:colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and magnesium stearate."
},
{
"NDCCode": "67046-0060-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0060-3) ",
"NDC11Code": "67046-0060-03",
"ProductNDC": "67046-0060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naltrexone Hydrochloride",
"NonProprietaryName": "Naltrexone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260527",
"EndMarketingDate": "20271130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075274",
"LabelerName": "Coupler LLC",
"SubstanceName": "NALTREXONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20260527",
"EndMarketingDatePackage": "20271130",
"SamplePackage": "N",
"IndicationAndUsage": "Naltrexone Hydrochloride Tablets USP are indicated in the treatment of alcohol dependence and for the blockade of the effects of exogenously administered opioids. Naltrexone Hydrochloride Tablets USP have not been shown to provide any therapeutic benefit except as part of an appropriate plan of management for the addictions.",
"Description": "Naltrexone hydrochloride, an opioid antagonist, are a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5a)-. The structural formula is as follows. Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone Hydrochloride Tablets USP are available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride. Naltrexone Hydrochloride Tablets USP also contain: carnauba wax powder, colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide and yellow iron oxide."
},
{
"NDCCode": "67046-0068-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0068-3) ",
"NDC11Code": "67046-0068-03",
"ProductNDC": "67046-0068",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260427",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].",
"Description": "Mirtazapine tablets, USP contain mirtazapine USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino [2,1-a] pyrido [2,3-c][2] benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture:. Mirtazapine is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine USP, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine USP. Each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black, and iron oxide yellow."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67046-1121-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-1121-3) </PackageDescription>
<NDC11Code>67046-1121-03</NDC11Code>
<ProductNDC>67046-1121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium</ProprietaryName>
<NonProprietaryName>Losartan Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091497</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Losartan potassium is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. ( 1.2) , 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. ( 1.3) .</IndicationAndUsage>
<Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT 1receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C 22H 22ClKN 6O, and its structural formula is:. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP, and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, and titanium dioxide. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg, contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively. Losartan potassium tablets USP, 25 mg and 50 mg meet USP Dissolution Test 1 and Losartan potassium tablets USP, 100 mg meet USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>36987-1121-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1121-3)</PackageDescription>
<NDC11Code>36987-1121-03</NDC11Code>
<ProductNDC>36987-1121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Cat Hair</ProprietaryName>
<NonProprietaryName>Standardized Cat Hair</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920929</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103384</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>FELIS CATUS HAIR</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Animal Hair Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dander [CS],Allergens [CS],Salivary Proteins and Peptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Cat Hair is intended for use in the diagnosis and therapy of cat allergy patients as established by allergy history and skin test reactivity.</IndicationAndUsage>
<Description>Standardized cat hair extract is a sterile glycerinated injectable solution containing the extractables of dried, powdered cat hair, wash and dander and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, water for injection and 0.4%, phenol as preservative in sterile containers. All extracts are aseptically filled. Standardized cat hair extract is to be administered by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injections. The Bioequivalent Allergy Unit (BAU) nomenclature, now used for all Standardized Cat Extracts, replaces the previous Allergy Unit (AU) nomenclature for these products. Bioequivalent Allergy Units are based on quantitative intradermal skin test results and are intended to assure that the labeled unit of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted to one half million fold to produce an intradermal sum of erythema diameter response of 50 mm in highly puncture reactive subjects. In vitro assignment of BAU/mL to this product is based on radial immunodiffusion (RID) assay results according to guidelines established by the Center for Biologics Evaluation and Research (CBER) as indicated below.(5, 6). Bioequivalent Allergy Units (BAU) are NOT interchangeable with Allergy Units (AU). Standardized Cat Hair extract labeled in BAU/mL are not interchangeable with standardized cat pelt extracts or with cat hair extracts labeled in AU/mL or with non-standardized cat hair extracts. It has been recognized through investigation that the allergens responsible for Cat allergy are found in the pelt, hair, dander, saliva, serum and urine.(1) Saliva especially when deposited on and in combination with the hair, root hairs and skin can produce a significant allergic reaction. Repeated surface washing of the animal proved significant enough so that the wash was added to the whole of the raw material producing the cat allergenic extract.(2,3,4) However the amount of Fel d 1 varies widely from animal to animal so it is an advantage to use raw material with a known amount of the antigen. Nelco's raw material, supplied by Biopol Laboratory, is dried, powdered cat hair, wash and dander, labeled with the number of Fel d 1 units in each gram of dried material per container. The raw material is extracted with a 50%(v/v) glycerinated diluent containing glycerin and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI, and 0.4% phenol as a preservative. Although extracts from whole pelts of cats are similar in content of Fel d 1 to extracts prepared only from wash, hair and dander, pelt extracts may contain other non-Fel d 1 allergenic molecules.</Description>
</NDC>
<NDC>
<NDCCode>37662-1121-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-1121-3) </PackageDescription>
<NDC11Code>37662-1121-03</NDC11Code>
<ProductNDC>37662-1121</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cobaltum Phosphoricum</ProprietaryName>
<NonProprietaryName>Cobaltum Phosphoricum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220729</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>COBALTOUS PHOSPHATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67296-1121-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (67296-1121-3) </PackageDescription>
<NDC11Code>67296-1121-03</NDC11Code>
<ProductNDC>67296-1121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075511</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.</IndicationAndUsage>
<Description>The active ingredient in Famotidine Tablets USP is a histamine-2 (H 2) receptor antagonist. Famotidine, USP is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio] propylidene] sulfamide and has the following structural formula:. C 8H 15N 7O 2S 3 M.W. 337.45. Each Famotidine Tablet USP for oral administration contains either 20 mg or 40 mg of famotidine, USP and has the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized corn starch, sodium starch glycolate, talc, titanium dioxide, yellow iron oxide. In addition the 20 mg contains lactose monohydrate, red iron oxide and triacetin and the 40 mg contains FD&C blue No. 2 aluminum lake and FD&C yellow No. 6 aluminum lake. Famotidine, USP is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.</Description>
</NDC>
<NDC>
<NDCCode>71335-1121-3</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (71335-1121-3) </PackageDescription>
<NDC11Code>71335-1121-03</NDC11Code>
<ProductNDC>71335-1121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040600</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-( p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. C21H27CIN2O2·2HCl. M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include carnauba wax, colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, D&C Yellow #10 Aluminum Lake (25 mg and 50 mg), FD&C Blue #2 Aluminum Lake (25 mg), FD&C Red #40 Aluminum Lake (50 mg), FD&C Yellow #6 Aluminum Lake (10 mg and 50 mg), hypromellose, polyethylene glycol 3350, polyvinyl alcohol, talc, titanium dioxide, triacetin and yellow iron oxide (10 mg).</Description>
</NDC>
<NDC>
<NDCCode>79718-1121-3</NDCCode>
<PackageDescription>15 mL in 1 BOTTLE (79718-1121-3) </PackageDescription>
<NDC11Code>79718-1121-03</NDC11Code>
<ProductNDC>79718-1121</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Arnica Montana</ProprietaryName>
<NonProprietaryName>Arnica Montana</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201113</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Warsan Homeopathic</LabelerName>
<SubstanceName>ARNICA MONTANA</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporary relief from muscle pain, injuries, bruises.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>85512-1121-3</NDCCode>
<PackageDescription>10 g in 1 BOTTLE (85512-1121-3) </PackageDescription>
<NDC11Code>85512-1121-03</NDC11Code>
<ProductNDC>85512-1121</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Dulaglutide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20250602</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Qingdao Qinzeyuan Biotechnology Co., Ltd</LabelerName>
<SubstanceName>DULAGLUTIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>02-JUN-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>0363-1121-03</NDCCode>
<PackageDescription>89 mL in 1 TUBE (0363-1121-03) </PackageDescription>
<NDC11Code>00363-1121-03</NDC11Code>
<ProductNDC>0363-1121</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hydrating Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone 3% Homosalate 15% Octisalate 5% Octocrylene 10%</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20161116</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Walgreens</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>3; 15; 5; 10</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses helps prevent sunburn higher SPF gives more sunburnprotection retains SPF after 80 minutes of activity in the water orsweating provides high protection against sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0363-1121-06</NDCCode>
<PackageDescription>236 mL in 1 CAN (0363-1121-06) </PackageDescription>
<NDC11Code>00363-1121-06</NDC11Code>
<ProductNDC>0363-1121</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hydrating Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone 3% Homosalate 15% Octisalate 5% Octocrylene 10%</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20161116</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Walgreens</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>3; 15; 5; 10</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses helps prevent sunburn higher SPF gives more sunburnprotection retains SPF after 80 minutes of activity in the water orsweating provides high protection against sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0363-1121-07</NDCCode>
<PackageDescription>296 mL in 1 TUBE (0363-1121-07) </PackageDescription>
<NDC11Code>00363-1121-07</NDC11Code>
<ProductNDC>0363-1121</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hydrating Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone 3% Homosalate 15% Octisalate 5% Octocrylene 10%</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20161116</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Walgreens</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>3; 15; 5; 10</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses helps prevent sunburn higher SPF gives more sunburnprotection retains SPF after 80 minutes of activity in the water orsweating provides high protection against sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0832-1121-42</NDCCode>
<PackageDescription>2 BOTTLE, PUMP in 1 CARTON (0832-1121-42) / 60 GEL, METERED in 1 BOTTLE, PUMP (0832-1121-40) </PackageDescription>
<NDC11Code>00832-1121-42</NDC11Code>
<ProductNDC>0832-1121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Testosterone</ProprietaryName>
<NonProprietaryName>Testosterone</NonProprietaryName>
<DosageFormName>GEL, METERED</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140616</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA204399</ApplicationNumber>
<LabelerName>Upsher-Smith Laboratories, LLC</LabelerName>
<SubstanceName>TESTOSTERONE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140616</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Testosterone gel is indicated for replacement therapy in adult males for conditions associated with a deficiency or absence of endogenous testosterone: 1 Primary hypogonadism (congenital or acquired): testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome, orchiectomy, Klinefelter's syndrome, chemotherapy, or toxic damage from alcohol or heavy metals. These men usually have low serum testosterone levels and gonadotropins (follicle-stimulating hormone [FSH], luteinizing hormone [LH]) above the normal range., 2 Hypogonadotropic hypogonadism (congenital or acquired): gonadotropin or luteinizing hormone-releasing hormone (LHRH) deficiency or pituitary-hypothalamic injury from tumors, trauma, or radiation. These men have low testosterone serum levels but have gonadotropins in the normal or low range.</IndicationAndUsage>
<Description>Testosterone gel, for topical use is a clear to translucent hydroalcoholic topical gel containing testosterone, an androgen. Testosterone gel provides continuous transdermal delivery of testosterone for 24 hours, following a single application to intact, clean, dry skin of the shoulders and/or upper arms. Testosterone gel is available in unit-dose tubes, unit-dose packets, and a metered-dose pump. One 5-g or two 5-g tubes/packets of testosterone gel contains 50 mg or 100 mg of testosterone, respectively. One pump actuation dispenses 1.25 g of gel, which contains 12.5 mg of testosterone. Four pump actuations or eight pump actuations contain 50 mg or 100 mg of testosterone, respectively. Each metered-dose pump container is capable of dispensing 60 pump actuations. The active pharmacological ingredient in testosterone gel is testosterone. Testosterone USP is a white to practically white crystalline powder chemically described as 17-β hydroxyandrost-4-en-3-one. The structural formula is shown in the following figure. Inactive ingredients in testosterone gel are carbomer copolymer Type B, carbomer homopolymer Type C, diisopropyl adipate, ethyl alcohol, glycerin, methyl laurate, oleyl alcohol, polyethylene glycol, propylene glycol, purified water, and tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>36987-1121-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-1121-1)</PackageDescription>
<NDC11Code>36987-1121-01</NDC11Code>
<ProductNDC>36987-1121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Cat Hair</ProprietaryName>
<NonProprietaryName>Standardized Cat Hair</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920929</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103384</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>FELIS CATUS HAIR</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Animal Hair Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dander [CS],Allergens [CS],Salivary Proteins and Peptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Cat Hair is intended for use in the diagnosis and therapy of cat allergy patients as established by allergy history and skin test reactivity.</IndicationAndUsage>
<Description>Standardized cat hair extract is a sterile glycerinated injectable solution containing the extractables of dried, powdered cat hair, wash and dander and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, water for injection and 0.4%, phenol as preservative in sterile containers. All extracts are aseptically filled. Standardized cat hair extract is to be administered by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injections. The Bioequivalent Allergy Unit (BAU) nomenclature, now used for all Standardized Cat Extracts, replaces the previous Allergy Unit (AU) nomenclature for these products. Bioequivalent Allergy Units are based on quantitative intradermal skin test results and are intended to assure that the labeled unit of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted to one half million fold to produce an intradermal sum of erythema diameter response of 50 mm in highly puncture reactive subjects. In vitro assignment of BAU/mL to this product is based on radial immunodiffusion (RID) assay results according to guidelines established by the Center for Biologics Evaluation and Research (CBER) as indicated below.(5, 6). Bioequivalent Allergy Units (BAU) are NOT interchangeable with Allergy Units (AU). Standardized Cat Hair extract labeled in BAU/mL are not interchangeable with standardized cat pelt extracts or with cat hair extracts labeled in AU/mL or with non-standardized cat hair extracts. It has been recognized through investigation that the allergens responsible for Cat allergy are found in the pelt, hair, dander, saliva, serum and urine.(1) Saliva especially when deposited on and in combination with the hair, root hairs and skin can produce a significant allergic reaction. Repeated surface washing of the animal proved significant enough so that the wash was added to the whole of the raw material producing the cat allergenic extract.(2,3,4) However the amount of Fel d 1 varies widely from animal to animal so it is an advantage to use raw material with a known amount of the antigen. Nelco's raw material, supplied by Biopol Laboratory, is dried, powdered cat hair, wash and dander, labeled with the number of Fel d 1 units in each gram of dried material per container. The raw material is extracted with a 50%(v/v) glycerinated diluent containing glycerin and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI, and 0.4% phenol as a preservative. Although extracts from whole pelts of cats are similar in content of Fel d 1 to extracts prepared only from wash, hair and dander, pelt extracts may contain other non-Fel d 1 allergenic molecules.</Description>
</NDC>
<NDC>
<NDCCode>36987-1121-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1121-2)</PackageDescription>
<NDC11Code>36987-1121-02</NDC11Code>
<ProductNDC>36987-1121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Cat Hair</ProprietaryName>
<NonProprietaryName>Standardized Cat Hair</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920929</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103384</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>FELIS CATUS HAIR</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Animal Hair Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dander [CS],Allergens [CS],Salivary Proteins and Peptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Cat Hair is intended for use in the diagnosis and therapy of cat allergy patients as established by allergy history and skin test reactivity.</IndicationAndUsage>
<Description>Standardized cat hair extract is a sterile glycerinated injectable solution containing the extractables of dried, powdered cat hair, wash and dander and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, water for injection and 0.4%, phenol as preservative in sterile containers. All extracts are aseptically filled. Standardized cat hair extract is to be administered by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injections. The Bioequivalent Allergy Unit (BAU) nomenclature, now used for all Standardized Cat Extracts, replaces the previous Allergy Unit (AU) nomenclature for these products. Bioequivalent Allergy Units are based on quantitative intradermal skin test results and are intended to assure that the labeled unit of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted to one half million fold to produce an intradermal sum of erythema diameter response of 50 mm in highly puncture reactive subjects. In vitro assignment of BAU/mL to this product is based on radial immunodiffusion (RID) assay results according to guidelines established by the Center for Biologics Evaluation and Research (CBER) as indicated below.(5, 6). Bioequivalent Allergy Units (BAU) are NOT interchangeable with Allergy Units (AU). Standardized Cat Hair extract labeled in BAU/mL are not interchangeable with standardized cat pelt extracts or with cat hair extracts labeled in AU/mL or with non-standardized cat hair extracts. It has been recognized through investigation that the allergens responsible for Cat allergy are found in the pelt, hair, dander, saliva, serum and urine.(1) Saliva especially when deposited on and in combination with the hair, root hairs and skin can produce a significant allergic reaction. Repeated surface washing of the animal proved significant enough so that the wash was added to the whole of the raw material producing the cat allergenic extract.(2,3,4) However the amount of Fel d 1 varies widely from animal to animal so it is an advantage to use raw material with a known amount of the antigen. Nelco's raw material, supplied by Biopol Laboratory, is dried, powdered cat hair, wash and dander, labeled with the number of Fel d 1 units in each gram of dried material per container. The raw material is extracted with a 50%(v/v) glycerinated diluent containing glycerin and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI, and 0.4% phenol as a preservative. Although extracts from whole pelts of cats are similar in content of Fel d 1 to extracts prepared only from wash, hair and dander, pelt extracts may contain other non-Fel d 1 allergenic molecules.</Description>
</NDC>
<NDC>
<NDCCode>36987-1121-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-1121-4)</PackageDescription>
<NDC11Code>36987-1121-04</NDC11Code>
<ProductNDC>36987-1121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Cat Hair</ProprietaryName>
<NonProprietaryName>Standardized Cat Hair</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920929</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103384</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>FELIS CATUS HAIR</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Animal Hair Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dander [CS],Allergens [CS],Salivary Proteins and Peptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Cat Hair is intended for use in the diagnosis and therapy of cat allergy patients as established by allergy history and skin test reactivity.</IndicationAndUsage>
<Description>Standardized cat hair extract is a sterile glycerinated injectable solution containing the extractables of dried, powdered cat hair, wash and dander and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, water for injection and 0.4%, phenol as preservative in sterile containers. All extracts are aseptically filled. Standardized cat hair extract is to be administered by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injections. The Bioequivalent Allergy Unit (BAU) nomenclature, now used for all Standardized Cat Extracts, replaces the previous Allergy Unit (AU) nomenclature for these products. Bioequivalent Allergy Units are based on quantitative intradermal skin test results and are intended to assure that the labeled unit of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted to one half million fold to produce an intradermal sum of erythema diameter response of 50 mm in highly puncture reactive subjects. In vitro assignment of BAU/mL to this product is based on radial immunodiffusion (RID) assay results according to guidelines established by the Center for Biologics Evaluation and Research (CBER) as indicated below.(5, 6). Bioequivalent Allergy Units (BAU) are NOT interchangeable with Allergy Units (AU). Standardized Cat Hair extract labeled in BAU/mL are not interchangeable with standardized cat pelt extracts or with cat hair extracts labeled in AU/mL or with non-standardized cat hair extracts. It has been recognized through investigation that the allergens responsible for Cat allergy are found in the pelt, hair, dander, saliva, serum and urine.(1) Saliva especially when deposited on and in combination with the hair, root hairs and skin can produce a significant allergic reaction. Repeated surface washing of the animal proved significant enough so that the wash was added to the whole of the raw material producing the cat allergenic extract.(2,3,4) However the amount of Fel d 1 varies widely from animal to animal so it is an advantage to use raw material with a known amount of the antigen. Nelco's raw material, supplied by Biopol Laboratory, is dried, powdered cat hair, wash and dander, labeled with the number of Fel d 1 units in each gram of dried material per container. The raw material is extracted with a 50%(v/v) glycerinated diluent containing glycerin and 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI, and 0.4% phenol as a preservative. Although extracts from whole pelts of cats are similar in content of Fel d 1 to extracts prepared only from wash, hair and dander, pelt extracts may contain other non-Fel d 1 allergenic molecules.</Description>
</NDC>
<NDC>
<NDCCode>53808-1121-1</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (53808-1121-1) </PackageDescription>
<NDC11Code>53808-1121-01</NDC11Code>
<ProductNDC>53808-1121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Ondansetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078539</ApplicationNumber>
<LabelerName>DOH CENTRAL PHARMACY</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. : 1 highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2, 2 initial and repeat courses of moderately emetogenic cancer chemotherapy, 3 radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6.</Description>
</NDC>
<NDC>
<NDCCode>54973-1121-1</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (54973-1121-1) > 50 TABLET in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>54973-1121-01</NDC11Code>
<ProductNDC>54973-1121</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Calms Forte</ProprietaryName>
<NonProprietaryName>Avena Sativa Flowering Top, Chamomile, Humulus Lupulus Stem, Passiflora Incarnata Flower, Calcium Phosphate, Ferrosoferric Phosphate, Potassium Phosphate, Dibasic, Sodium Phosphate, And Magnesium Phosphate, Dibasic Trihydrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19601001</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hyland's</LabelerName>
<SubstanceName>AVENA SATIVA FLOWERING TOP; CHAMOMILE; HUMULUS LUPULUS STEM; PASSIFLORA INCARNATA FLOWER; CALCIUM PHOSPHATE; FERROSOFERRIC PHOSPHATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM PHOSPHATE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE</SubstanceName>
<StrengthNumber>1; 2; 1; 1; 3; 3; 3; 3; 3</StrengthNumber>
<StrengthUnit>[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>54973-1121-2</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (54973-1121-2) > 100 TABLET in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>54973-1121-02</NDC11Code>
<ProductNDC>54973-1121</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Calms Forte</ProprietaryName>
<NonProprietaryName>Avena Sativa Flowering Top, Chamomile, Humulus Lupulus Stem, Passiflora Incarnata Flower, Calcium Phosphate, Ferrosoferric Phosphate, Potassium Phosphate, Dibasic, Sodium Phosphate, And Magnesium Phosphate, Dibasic Trihydrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19601001</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hyland's</LabelerName>
<SubstanceName>AVENA SATIVA FLOWERING TOP; CHAMOMILE; HUMULUS LUPULUS STEM; PASSIFLORA INCARNATA FLOWER; CALCIUM PHOSPHATE; FERROSOFERRIC PHOSPHATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM PHOSPHATE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE</SubstanceName>
<StrengthNumber>1; 2; 1; 1; 3; 3; 3; 3; 3</StrengthNumber>
<StrengthUnit>[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>54973-1121-4</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (54973-1121-4) > 250 TABLET in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>54973-1121-04</NDC11Code>
<ProductNDC>54973-1121</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Calms Forte</ProprietaryName>
<NonProprietaryName>Avena Sativa Flowering Top, Chamomile, Humulus Lupulus Stem, Passiflora Incarnata Flower, Calcium Phosphate, Ferrosoferric Phosphate, Potassium Phosphate, Dibasic, Sodium Phosphate, And Magnesium Phosphate, Dibasic Trihydrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19601001</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hyland's</LabelerName>
<SubstanceName>AVENA SATIVA FLOWERING TOP; CHAMOMILE; HUMULUS LUPULUS STEM; PASSIFLORA INCARNATA FLOWER; CALCIUM PHOSPHATE; FERROSOFERRIC PHOSPHATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM PHOSPHATE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE</SubstanceName>
<StrengthNumber>1; 2; 1; 1; 3; 3; 3; 3; 3</StrengthNumber>
<StrengthUnit>[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>54973-1121-5</NDCCode>
<PackageDescription>4 TABLET in 1 POUCH (54973-1121-5)</PackageDescription>
<NDC11Code>54973-1121-05</NDC11Code>
<ProductNDC>54973-1121</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Calms Forte</ProprietaryName>
<NonProprietaryName>Avena Sativa Flowering Top, Chamomile, Humulus Lupulus Stem, Passiflora Incarnata Flower, Calcium Phosphate, Ferrosoferric Phosphate, Potassium Phosphate, Dibasic, Sodium Phosphate, And Magnesium Phosphate, Dibasic Trihydrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19601001</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hyland's</LabelerName>
<SubstanceName>AVENA SATIVA FLOWERING TOP; CHAMOMILE; HUMULUS LUPULUS STEM; PASSIFLORA INCARNATA FLOWER; CALCIUM PHOSPHATE; FERROSOFERRIC PHOSPHATE; POTASSIUM PHOSPHATE, DIBASIC; SODIUM PHOSPHATE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE</SubstanceName>
<StrengthNumber>1; 2; 1; 1; 3; 3; 3; 3; 3</StrengthNumber>
<StrengthUnit>[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>67046-0003-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0003-3) </PackageDescription>
<NDC11Code>67046-0003-03</NDC11Code>
<ProductNDC>67046-0003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67046-0007-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0007-3) </PackageDescription>
<NDC11Code>67046-0007-03</NDC11Code>
<ProductNDC>67046-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260505</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203346</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alprazolam tablets are indicated for the: : 1 acute treatment of generalized anxiety disorder (GAD) in adults., 2 treatment of panic disorder (PD), with or without agoraphobia in adults.</IndicationAndUsage>
<Description>Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam USP is a white to off-white, crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam tablet USP, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium 85% with sodium benzoate 15%, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition, the 0.5 mg tablet contains FD&C Yellow # 6 aluminum lake and the 1 mg tablet contains FD&C Blue No. 2 lake.</Description>
</NDC>
<NDC>
<NDCCode>67046-0015-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0015-3) </PackageDescription>
<NDC11Code>67046-0015-03</NDC11Code>
<ProductNDC>67046-0015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260424</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065256</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>875</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260424</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. .</IndicationAndUsage>
<Description>Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0038-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0038-3) </PackageDescription>
<NDC11Code>67046-0038-03</NDC11Code>
<ProductNDC>67046-0038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201504</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quetiapine is an atypical antipsychotic indicated for the treatment of. · Schizophrenia ( 1.1). · Bipolar I disorder manic episodes ( 1.2). · Bipolar disorder, depressive episodes ( 1.2).</IndicationAndUsage>
<Description>Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f] [1,4]thiazepin-11-yl-1-piperazinyl) ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets, USP is supplied for oral administration as 25 mg (round peach), 50 mg (round, white), 100 mg (round yellow), 150 mg (round, off white to light yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic dicalcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg, 150 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 150 mg tablet contains 172.70 mg of quetiapine fumarate USP equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.27 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.40 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.54 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine.</Description>
</NDC>
<NDC>
<NDCCode>67046-0040-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0040-3) </PackageDescription>
<NDC11Code>67046-0040-03</NDC11Code>
<ProductNDC>67046-0040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040715</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
<Description>Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>67046-0041-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0041-3) </PackageDescription>
<NDC11Code>67046-0041-03</NDC11Code>
<ProductNDC>67046-0041</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260424</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040715</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260424</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
<Description>Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>67046-0053-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0053-3) </PackageDescription>
<NDC11Code>67046-0053-03</NDC11Code>
<ProductNDC>67046-0053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol</ProprietaryName>
<NonProprietaryName>Haloperidol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071173</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>HALOPERIDOL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
<Description>Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. C21H23ClFNO2375.87. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&C Red No. 40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>67046-0057-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0057-3) </PackageDescription>
<NDC11Code>67046-0057-03</NDC11Code>
<ProductNDC>67046-0057</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meloxicam</ProprietaryName>
<NonProprietaryName>Meloxicam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MELOXICAM</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meloxicam Tablets are non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥ 60 kg ( 1.3) .</IndicationAndUsage>
<Description>Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each yellow meloxicam tablet contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula. Meloxicam, USP is a pale yellow powder, practically insoluble in water, slightly soluble in acetone, soluble in dimethylformamide, very slightly soluble in ethanol (96 %) and in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Each meloxicam tablet, USP intended for oral administration contains 7.5 mg or 15 mg of meloxicam. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium citrate dihydrate.</Description>
</NDC>
<NDC>
<NDCCode>67046-0059-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0059-3) </PackageDescription>
<NDC11Code>67046-0059-03</NDC11Code>
<ProductNDC>67046-0059</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260622</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>32.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1. Sedative 2. Anticonvulsant - For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5- phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula:. C 12H 12N 2O 3 M.W. = 232.24 Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg, or 97.2 mg of phenobarbital, USP. Inactive ingredients include:colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>67046-0060-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0060-3) </PackageDescription>
<NDC11Code>67046-0060-03</NDC11Code>
<ProductNDC>67046-0060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naltrexone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naltrexone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260527</StartMarketingDate>
<EndMarketingDate>20271130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075274</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>NALTREXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20260527</StartMarketingDatePackage>
<EndMarketingDatePackage>20271130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naltrexone Hydrochloride Tablets USP are indicated in the treatment of alcohol dependence and for the blockade of the effects of exogenously administered opioids. Naltrexone Hydrochloride Tablets USP have not been shown to provide any therapeutic benefit except as part of an appropriate plan of management for the addictions.</IndicationAndUsage>
<Description>Naltrexone hydrochloride, an opioid antagonist, are a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5a)-. The structural formula is as follows. Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone Hydrochloride Tablets USP are available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride. Naltrexone Hydrochloride Tablets USP also contain: carnauba wax powder, colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0068-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0068-3) </PackageDescription>
<NDC11Code>67046-0068-03</NDC11Code>
<ProductNDC>67046-0068</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Mirtazapine tablets, USP contain mirtazapine USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino [2,1-a] pyrido [2,3-c][2] benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture:. Mirtazapine is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine USP, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine USP. Each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black, and iron oxide yellow.</Description>
</NDC>
</NDCList>