{
"NDC": [
{
"NDCCode": "67046-117-28",
"PackageDescription": "28 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-28)",
"NDC11Code": "67046-0117-28",
"ProductNDC": "67046-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078048",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose."
},
{
"NDCCode": "67046-117-07",
"PackageDescription": "7 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-07)",
"NDC11Code": "67046-0117-07",
"ProductNDC": "67046-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078048",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose."
},
{
"NDCCode": "67046-117-14",
"PackageDescription": "14 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-14)",
"NDC11Code": "67046-0117-14",
"ProductNDC": "67046-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078048",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose."
},
{
"NDCCode": "67046-117-15",
"PackageDescription": "15 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-15)",
"NDC11Code": "67046-0117-15",
"ProductNDC": "67046-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078048",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose."
},
{
"NDCCode": "67046-117-20",
"PackageDescription": "20 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-20)",
"NDC11Code": "67046-0117-20",
"ProductNDC": "67046-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078048",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose."
},
{
"NDCCode": "67046-117-21",
"PackageDescription": "21 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-21)",
"NDC11Code": "67046-0117-21",
"ProductNDC": "67046-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078048",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose."
},
{
"NDCCode": "67046-117-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-30)",
"NDC11Code": "67046-0117-30",
"ProductNDC": "67046-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078048",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose."
},
{
"NDCCode": "67046-117-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-60)",
"NDC11Code": "67046-0117-60",
"ProductNDC": "67046-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078048",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose."
},
{
"NDCCode": "13107-117-28",
"PackageDescription": "2 BOTTLE in 1 CARTON (13107-117-28) > 14 CAPSULE in 1 BOTTLE",
"NDC11Code": "13107-0117-28",
"ProductNDC": "13107-117",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Omeprazole And Sodium Bicarbonate",
"NonProprietaryName": "Omeprazole And Sodium Bicarbonate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20140930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204923",
"LabelerName": "Aurolife Pharma, LLC",
"SubstanceName": "OMEPRAZOLE; SODIUM BICARBONATE",
"StrengthNumber": "20; 1100",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20140930",
"SamplePackage": "N",
"IndicationAndUsage": "treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of hearburn. This drug may take 1 to 4 days for full effect."
},
{
"NDCCode": "13537-117-28",
"PackageDescription": "1 TUBE in 1 BOX (13537-117-28) > 4 g in 1 TUBE (13537-117-27)",
"NDC11Code": "13537-0117-28",
"ProductNDC": "13537-117",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lbel Couleur Luxe Rouge Amplifier Xp Amplifying Spf 15",
"ProprietaryNameSuffix": "(rose Femme) - Pink",
"NonProprietaryName": "Octinoxate And Oxybenzone",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140127",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE; OXYBENZONE",
"StrengthNumber": ".047; .009",
"StrengthUnit": "g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "51824-117-01",
"PackageDescription": "28 g in 1 TUBE (51824-117-01) ",
"NDC11Code": "51824-0117-01",
"ProductNDC": "51824-117",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Careall Triple Antibiotic",
"NonProprietaryName": "Bacitracin Zinc, Neomycin Sulfate, Polymyxin B Sulfate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260801",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M004",
"LabelerName": "New World Imports, Inc",
"SubstanceName": "BACITRACIN ZINC; NEOMYCIN SULFATE; POLYMYXIN B SULFATE",
"StrengthNumber": "400; 5; 5000",
"StrengthUnit": "[USP'U]/g; mg/g; [USP'U]/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Active",
"LastUpdate": "2026-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260801",
"SamplePackage": "N",
"IndicationAndUsage": "First aid to help prevent infection in minor cuts, scrapes and burns."
},
{
"NDCCode": "52389-117-28",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (52389-117-28) > 14 TABLET, FILM COATED in 1 BLISTER PACK (52389-117-01)",
"NDC11Code": "52389-0117-28",
"ProductNDC": "52389-117",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pep-back",
"ProprietaryNameSuffix": "Peak Performance",
"NonProprietaryName": "Caffeine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070328",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part340",
"LabelerName": "Alva-Amco Pharmacal Companies, Inc.",
"SubstanceName": "CAFFEINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-11-09",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "54473-117-01",
"PackageDescription": "28 g in 1 TUBE (54473-117-01)",
"NDC11Code": "54473-0117-01",
"ProductNDC": "54473-117",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dermacort",
"ProprietaryNameSuffix": "Anti-itch",
"NonProprietaryName": "Hydrocortisone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20000802",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Melaleuca, Inc.",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Uses: 1 for the temporary relief of itching associated with minor skin irritations, inflammation, and rashes due to eczema, psoriasis, seborrheic dermatitis, poison ivy, poison oak, poison sumac, insect bites, soaps, detergents, and jewelry, 2 other uses of this product should be only under the advice and supervision of a doctor."
},
{
"NDCCode": "54473-117-28",
"PackageDescription": "28 g in 1 TUBE (54473-117-28) ",
"NDC11Code": "54473-0117-28",
"ProductNDC": "54473-117",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dermacort",
"ProprietaryNameSuffix": "Anti-itch",
"NonProprietaryName": "Hydrocortisone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20000802",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Melaleuca, Inc.",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Uses: 1 For the temporary relief of itching associated with minor skin irritations, inflammation and rashes due to eczema, psoriasis, , seborrheic dermatitis, poison ivy, poison oak, poison sumac, insect bites, soaps, detergents, and jewelery, 2 Other use of this product should be only under the advice and supervision of a doctor. ."
},
{
"NDCCode": "57627-117-04",
"PackageDescription": "1 TUBE in 1 CARTON (57627-117-04) > 28 g in 1 TUBE (57627-117-03) ",
"NDC11Code": "57627-0117-04",
"ProductNDC": "57627-117",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ultra Light Sunscreen Broad Spectrum Spf 50",
"ProprietaryNameSuffix": "Merle Norman",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130329",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Merle Norman Cosmetics",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "3.39; 11.3; 5.65; 3.11; 6.78",
"StrengthUnit": "g/113g; g/113g; g/113g; g/113g; g/113g",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20161130",
"SamplePackage": "N",
"IndicationAndUsage": "Stop use and ask a doctor if rash occurs."
},
{
"NDCCode": "62032-508-04",
"PackageDescription": "1 KIT in 1 CARTON (62032-508-04) * 60 mL in 1 BOTTLE, PLASTIC * 57 g in 1 BOTTLE, PLASTIC (62032-118-36) * 60 mL in 1 BOTTLE, PLASTIC * 28.5 g in 1 BOTTLE, PLASTIC * 30 mL in 1 BOTTLE, PLASTIC (62032-119-10) * 57 g in 1 BOTTLE, PLASTIC (62032-117-36) * 28.5 g in 1 BOTTLE, PLASTIC (62032-115-10)",
"NDC11Code": "62032-0508-04",
"ProductNDC": "62032-508",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Condition And Enhance System",
"ProprietaryNameSuffix": "Travel-size Surgical",
"NonProprietaryName": "Hydroquinone, Octinoxate And Zinc Oxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20070820",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "OMP, INC.",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "The gradual bleaching of hyperpigmented skin conditions such as chloasma, melasma, freckles, senile lentigines, and other unwanted areas of melanin hyperpigmentation.",
"Description": "Hydroquinone is 1,4-benzenediol. Hydroquinone occurs as fine, white needles. The drug is freely soluble in water and in alcohol. Chemically, hydroquinone is designated as p-dihydroxybenzene; the empirical formula is C6 H6 O2; molecular weight is 110.0."
},
{
"NDCCode": "62032-510-60",
"PackageDescription": "1 KIT in 1 CARTON (62032-510-60) * 30 mL in 1 BOTTLE, PLASTIC (62032-119-10) * 60 mL in 1 BOTTLE, PLASTIC * 60 mL in 1 BOTTLE, PLASTIC * 28.5 g in 1 BOTTLE, PLASTIC * 57 g in 1 BOTTLE, PLASTIC (62032-117-36) * 28.5 g in 1 BOTTLE, PLASTIC (62032-115-10)",
"NDC11Code": "62032-0510-60",
"ProductNDC": "62032-510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Condition And Enhance System",
"ProprietaryNameSuffix": "Travel-size Non-surgical",
"NonProprietaryName": "Hydroquinone, Octinoxate, And Zinc Oxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20070820",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "OMP, INC.",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "The gradual bleaching of hyperpigmented skin conditions such as chloasma, melasma, freckles, senile lentigines, and other unwanted areas of melanin hyperpigmentation.",
"Description": "Hydroquinone is 1,4-benzenediol. Hydroquinone occurs as fine, white needles. The drug is freely soluble in water and in alcohol. Chemically, hydroquinone is designated as p-dihydroxybenzene; the empirical formula is C6 H6 O2; molecular weight is 110.0. Obagi® Condition & Enhance Blender contains Hydroquinone USP 40 mg/gm in a base of purified water, glycerin, cetyl alcohol, PPG-2 myristyl ether propionate, sodium lauryl sulfate, TEA-salicylate, lactic acid, phenyl trimethicone, tocopheryl acetate, sodium metabisulfite, ascorbic acid, methylparaben, saponins, disodium EDTA, BHT, and propylparaben. Obagi® Condition & Enhance Clear contains Hydroquinone USP 40 mg/gm in a base of purified water, cetyl alcohol, glycerin, sodium lauryl sulfate, stearyl alcohol, tocopheryl acetate, ascorbic acid, sodium metabisulfite, lactic acid, saponins, disodium EDTA, methylparaben, BHT, propylparaben, and butylparaben."
},
{
"NDCCode": "63323-117-28",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 TRAY (63323-117-28) / 20 mL in 1 VIAL, SINGLE-DOSE (63323-117-41) ",
"NDC11Code": "63323-0117-28",
"ProductNDC": "63323-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluorouracil",
"NonProprietaryName": "Fluorouracil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20000712",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040279",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "FLUOROURACIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-08-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20000712",
"SamplePackage": "N",
"IndicationAndUsage": "Fluorouracil is indicated for the treatment of patients with. Adenocarcinoma of the Colon and Rectum. Adenocarcinoma of the Breast. Gastric Adenocarcinoma. Pancreatic Adenocarcinoma.",
"Description": "Fluorouracil injection, USP, a nucleoside metabolic inhibitor, is a colorless to yellow aqueous, sterile, nonpyrogenic injectable solution for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. C4H3FN2O2 M.W. 130.08."
},
{
"NDCCode": "67868-117-90",
"PackageDescription": "28 g in 1 TUBE (67868-117-90)",
"NDC11Code": "67868-0117-90",
"ProductNDC": "67868-117",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Benzocaine And Resorcinol",
"NonProprietaryName": "Benzocaine And Resorcinol",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090519",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Pharma Pac, LLC",
"SubstanceName": "BENZOCAINE; RESORCINOL",
"StrengthNumber": "200; 20",
"StrengthUnit": "mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "71288-117-28",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-117-28) / 26.3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0117-28",
"ProductNDC": "71288-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine",
"NonProprietaryName": "Gemcitabine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212129",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "38",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201211",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1), 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2), 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3), 4 as a single agent for the treatment of pancreatic cancer. (1.4).",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy- 2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows. Gemcitabine HCl is a white to off-white solid with a molecular formula of C 9H 11F 2N 3O 4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.55 mg, 1.14 grams, or 2.28 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "72205-117-28",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (72205-117-28) ",
"NDC11Code": "72205-0117-28",
"ProductNDC": "72205-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214824",
"LabelerName": "Novadoz Pharmaceuticals LLC",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250601",
"SamplePackage": "N",
"IndicationAndUsage": "Sunitinib malate capsule is a kinase inhibitor indicated for.",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.56.The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. Sunitinib malate capsules, for oral use, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, mannitol, magnesium stearate and pregelatinized starch as inactive ingredients.In addition 12.5 mg capsule shell contains gelatin, titanium dioxide and red iron oxide. The white printing ink contains shellac, propylene glycol, potassium hydroxide and titanium dioxide. In addition 25 mg capsule shell contains gelatin, titanium dioxide, yellow iron oxide, black iron oxide and red iron oxide. The white printing ink contains shellac, propylene glycol, potassium hydroxide and titanium dioxide. In addition 37.5 mg capsule shell contains gelatin, titanium dioxide and yellow iron oxide. The black printing ink contains shellac, propylene glycol, potassium hydroxide and black iron oxide. In addition 50 mg capsule shell contains gelatin, titanium dioxide, yellow iron oxide, red iron oxide and black iron oxide. The white printing ink contains shellac, propylene glycol, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "72789-117-28",
"PackageDescription": "28 TABLET in 1 BOTTLE, PLASTIC (72789-117-28) ",
"NDC11Code": "72789-0117-28",
"ProductNDC": "72789-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-10-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200923",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m 2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "67046-079-28",
"PackageDescription": "28 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (67046-079-28)",
"NDC11Code": "67046-0079-28",
"ProductNDC": "67046-079",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20040322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075932",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM ). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see CLINICAL STUDIES( 14) ] . The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see CLINICAL STUDIES( 14) ].",
"Description": "Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. BuPROPion Hydrochloride Extended-Release Tablets, USP (SR) are supplied for oral administration as 100 mg (aquamarine), 150 mg (plum), and 200 mg (light pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: carnauba wax, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, hypromellose, titanium dioxide, polyethylene glycol and polysorbate. In addition, the 100 mg tablet contains FD&C blue No. 1 lake and 150 mg tablet contains FD&C red No. 40 lake and FD&C blue No. 2 lake and the 200 mg tablet contains FD&C red No. 40 lake and FD&C yellow No. 6 lake. This product meets USP Drug Release Test #2."
},
{
"NDCCode": "67046-082-28",
"PackageDescription": "28 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (67046-082-28)",
"NDC11Code": "67046-0082-28",
"ProductNDC": "67046-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077284",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (XL) is an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD) and prevention of seasonal affective disorder (SAD). Periodically reevaluate long-term usefulness for the individual patient. ( 1).",
"Description": "Bupropion Hydrochloride Extended-Release Tablets USP (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: dehydrated alcohol, ethylcellulose, hydrochloric acid, hydroxypropylcellulose, methacrylic acid copolymer, povidone, silicon dioxide, hydrogenated vegetable oil and ethyl alcohol. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test 8."
},
{
"NDCCode": "67046-083-28",
"PackageDescription": "28 CAPSULE in 1 BLISTER PACK (67046-083-28)",
"NDC11Code": "67046-0083-28",
"ProductNDC": "67046-083",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Hydrochloride",
"NonProprietaryName": "Clindamycin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170920",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065061",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CLINDAMYCIN HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS],Neuromuscular Blockade [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Clindamycin hydrochloride capsules, USP are indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin hydrochloride capsules, USP are also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin hydrochloride capsules, USP are the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules, USP and other antibacterial drugs, clindamycin hydrochloride capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride, USP equivalent to 150 mg or 300 mg of clindamycin. Inactive ingredients: 150 mg - black iron oxide, corn starch, D&C Yellow #10, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide; 300 mg - black iron oxide, corn starch, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide. The structural formula is represented below. C 18H 33ClN 2O 5SHCl M.W. 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6, 7, 8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo-α-D- galacto-octopyranoside monohydrochloride."
},
{
"NDCCode": "67046-084-28",
"PackageDescription": "28 CAPSULE in 1 BLISTER PACK (67046-084-28)",
"NDC11Code": "67046-0084-28",
"ProductNDC": "67046-084",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Hydrochloride",
"NonProprietaryName": "Clindamycin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA063083",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CLINDAMYCIN HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride and other antibacterial drugs, clindamycin hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride. The structural formula is represented below. Clindamycin Hydrochloride Capsules USP (equivalent to 150 mg or 300 mg clindamycin) contain the following inactive ingredients: anhydrous lactose, magnesium stearate, starch (corn) and talc. The capsule shells contain: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, silicon dioxide, sodium lauryl sulfate, and titanium dioxide. The 150 mg capsule shell also contains black iron oxide and yellow iron oxide."
},
{
"NDCCode": "67046-085-28",
"PackageDescription": "28 CAPSULE, GELATIN COATED in 1 BLISTER PACK (67046-085-28)",
"NDC11Code": "67046-0085-28",
"ProductNDC": "67046-085",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Hydrochloride",
"NonProprietaryName": "Clindamycin Hydrochloride",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065194",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CLINDAMYCIN HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin the physician should consider the nature of the infection and the suitability of less toxic alternatives (eg, erythromycin). : 1 Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis and postsurgical vaginal cuff infection., 2 Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections., 3 Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections., 4 Pneumococci: Serious respiratory tract infections.",
"Description": "Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP, intended for oral administration, contain clindamycin hydrochloride equivalent to 150 mg or 300 mg of clindamycin. In addition, they also contain the following inactive ingredients: D&C yellow # 10, FD&C blue #1, gelatin, lactose monohydrate, magnesium stearate, pregelatinized starch and titanium dioxide. The structural formula is represented below. Molecular Formula: C18H33CIN2O5SHCl. Molecular Weight: 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4- propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride."
},
{
"NDCCode": "67046-094-28",
"PackageDescription": "28 TABLET in 1 BLISTER PACK (67046-094-28)",
"NDC11Code": "67046-0094-28",
"ProductNDC": "67046-094",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonidine Hydrochloride",
"NonProprietaryName": "Clonidine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070974",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CLONIDINE HYDROCHLORIDE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Clonidine hydrochloride tablets, USP are indicated in the treatment of hypertension. Clonidine hydrochloride tablets may be employed alone or concomitantly with other antihypertensive agents.",
"Description": "Clonidine hydrochloride, USP is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg, and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. The following inactive ingredients are contained in these products: corn starch, D&C yellow #10 Aluminum Lake, FD&C yellow #6 Aluminum Lake (Sunset Yellow Lake), lactose monohydrate, magnesium stearate, and sodium starch glycolate. Clonidine hydrochloride, USP is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. Clonidine hydrochloride, USP is an odorless, bitter, white, crystalline substance soluble in water and alcohol."
},
{
"NDCCode": "67046-097-28",
"PackageDescription": "28 TABLET in 1 BLISTER PACK (67046-097-28)",
"NDC11Code": "67046-0097-28",
"ProductNDC": "67046-097",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Chlorpheniramine Maleate",
"NonProprietaryName": "Chlorpheniramine Maleate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170919",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CHLORPHENIRAMINE MALEATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 itchy nose or throat, 3 itchy watery eyes, 4 sneezing."
},
{
"NDCCode": "67046-099-28",
"PackageDescription": "28 TABLET, FILM COATED in 1 BLISTER PACK (67046-099-28)",
"NDC11Code": "67046-0099-28",
"ProductNDC": "67046-099",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clopidogrel Bisulfate",
"NonProprietaryName": "Clopidogrel Bisulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076273",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CLOPIDOGREL BISULFATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE],P2Y12 Platelet Inhibitor [EPC],P2Y12 Receptor Antagonists [MoA],Cytochrome P450 2C8 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"Description": "Clopidogrel bisulfate USP is a thienopyridine class inhibitor of P2Y 12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C 16H 16Cl NO 2SH 2SO 4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as white, film coated, round, biconvex tablets debossed with “R” on one side and “196” on other side. Each tablet contains 97.875 mg of clopidogrel bisulfate which is the molar equivalent to 75 mg of clopidogrel base. Each tablet contains colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol and microcrystalline cellulose as inactive ingredients. The film coating contains hypromellose 2910-5cP, polyethylene glycol 400 and titanium dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67046-117-28</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-28)</PackageDescription>
<NDC11Code>67046-0117-28</NDC11Code>
<ProductNDC>67046-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078048</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>67046-117-07</NDCCode>
<PackageDescription>7 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-07)</PackageDescription>
<NDC11Code>67046-0117-07</NDC11Code>
<ProductNDC>67046-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078048</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>67046-117-14</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-14)</PackageDescription>
<NDC11Code>67046-0117-14</NDC11Code>
<ProductNDC>67046-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078048</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>67046-117-15</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-15)</PackageDescription>
<NDC11Code>67046-0117-15</NDC11Code>
<ProductNDC>67046-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078048</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>67046-117-20</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-20)</PackageDescription>
<NDC11Code>67046-0117-20</NDC11Code>
<ProductNDC>67046-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078048</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>67046-117-21</NDCCode>
<PackageDescription>21 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-21)</PackageDescription>
<NDC11Code>67046-0117-21</NDC11Code>
<ProductNDC>67046-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078048</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>67046-117-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-30)</PackageDescription>
<NDC11Code>67046-0117-30</NDC11Code>
<ProductNDC>67046-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078048</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>67046-117-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-60)</PackageDescription>
<NDC11Code>67046-0117-60</NDC11Code>
<ProductNDC>67046-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078048</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>13107-117-28</NDCCode>
<PackageDescription>2 BOTTLE in 1 CARTON (13107-117-28) > 14 CAPSULE in 1 BOTTLE</PackageDescription>
<NDC11Code>13107-0117-28</NDC11Code>
<ProductNDC>13107-117</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Omeprazole And Sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Omeprazole And Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204923</ApplicationNumber>
<LabelerName>Aurolife Pharma, LLC</LabelerName>
<SubstanceName>OMEPRAZOLE; SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>20; 1100</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of hearburn. This drug may take 1 to 4 days for full effect.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13537-117-28</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-117-28) > 4 g in 1 TUBE (13537-117-27)</PackageDescription>
<NDC11Code>13537-0117-28</NDC11Code>
<ProductNDC>13537-117</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lbel Couleur Luxe Rouge Amplifier Xp Amplifying Spf 15</ProprietaryName>
<ProprietaryNameSuffix>(rose Femme) - Pink</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Oxybenzone</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140127</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE</SubstanceName>
<StrengthNumber>.047; .009</StrengthNumber>
<StrengthUnit>g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51824-117-01</NDCCode>
<PackageDescription>28 g in 1 TUBE (51824-117-01) </PackageDescription>
<NDC11Code>51824-0117-01</NDC11Code>
<ProductNDC>51824-117</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Careall Triple Antibiotic</ProprietaryName>
<NonProprietaryName>Bacitracin Zinc, Neomycin Sulfate, Polymyxin B Sulfate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M004</ApplicationNumber>
<LabelerName>New World Imports, Inc</LabelerName>
<SubstanceName>BACITRACIN ZINC; NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>400; 5; 5000</StrengthNumber>
<StrengthUnit>[USP'U]/g; mg/g; [USP'U]/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>First aid to help prevent infection in minor cuts, scrapes and burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>52389-117-28</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (52389-117-28) > 14 TABLET, FILM COATED in 1 BLISTER PACK (52389-117-01)</PackageDescription>
<NDC11Code>52389-0117-28</NDC11Code>
<ProductNDC>52389-117</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pep-back</ProprietaryName>
<ProprietaryNameSuffix>Peak Performance</ProprietaryNameSuffix>
<NonProprietaryName>Caffeine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070328</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part340</ApplicationNumber>
<LabelerName>Alva-Amco Pharmacal Companies, Inc.</LabelerName>
<SubstanceName>CAFFEINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-11-09</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>54473-117-01</NDCCode>
<PackageDescription>28 g in 1 TUBE (54473-117-01)</PackageDescription>
<NDC11Code>54473-0117-01</NDC11Code>
<ProductNDC>54473-117</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dermacort</ProprietaryName>
<ProprietaryNameSuffix>Anti-itch</ProprietaryNameSuffix>
<NonProprietaryName>Hydrocortisone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20000802</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Melaleuca, Inc.</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Uses: 1 for the temporary relief of itching associated with minor skin irritations, inflammation, and rashes due to eczema, psoriasis, seborrheic dermatitis, poison ivy, poison oak, poison sumac, insect bites, soaps, detergents, and jewelry, 2 other uses of this product should be only under the advice and supervision of a doctor.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54473-117-28</NDCCode>
<PackageDescription>28 g in 1 TUBE (54473-117-28) </PackageDescription>
<NDC11Code>54473-0117-28</NDC11Code>
<ProductNDC>54473-117</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dermacort</ProprietaryName>
<ProprietaryNameSuffix>Anti-itch</ProprietaryNameSuffix>
<NonProprietaryName>Hydrocortisone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20000802</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Melaleuca, Inc.</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses: 1 For the temporary relief of itching associated with minor skin irritations, inflammation and rashes due to eczema, psoriasis, , seborrheic dermatitis, poison ivy, poison oak, poison sumac, insect bites, soaps, detergents, and jewelery, 2 Other use of this product should be only under the advice and supervision of a doctor. .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>57627-117-04</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (57627-117-04) > 28 g in 1 TUBE (57627-117-03) </PackageDescription>
<NDC11Code>57627-0117-04</NDC11Code>
<ProductNDC>57627-117</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ultra Light Sunscreen Broad Spectrum Spf 50</ProprietaryName>
<ProprietaryNameSuffix>Merle Norman</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130329</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Merle Norman Cosmetics</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>3.39; 11.3; 5.65; 3.11; 6.78</StrengthNumber>
<StrengthUnit>g/113g; g/113g; g/113g; g/113g; g/113g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stop use and ask a doctor if rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>62032-508-04</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (62032-508-04) * 60 mL in 1 BOTTLE, PLASTIC * 57 g in 1 BOTTLE, PLASTIC (62032-118-36) * 60 mL in 1 BOTTLE, PLASTIC * 28.5 g in 1 BOTTLE, PLASTIC * 30 mL in 1 BOTTLE, PLASTIC (62032-119-10) * 57 g in 1 BOTTLE, PLASTIC (62032-117-36) * 28.5 g in 1 BOTTLE, PLASTIC (62032-115-10)</PackageDescription>
<NDC11Code>62032-0508-04</NDC11Code>
<ProductNDC>62032-508</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Condition And Enhance System</ProprietaryName>
<ProprietaryNameSuffix>Travel-size Surgical</ProprietaryNameSuffix>
<NonProprietaryName>Hydroquinone, Octinoxate And Zinc Oxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20070820</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>OMP, INC.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>The gradual bleaching of hyperpigmented skin conditions such as chloasma, melasma, freckles, senile lentigines, and other unwanted areas of melanin hyperpigmentation.</IndicationAndUsage>
<Description>Hydroquinone is 1,4-benzenediol. Hydroquinone occurs as fine, white needles. The drug is freely soluble in water and in alcohol. Chemically, hydroquinone is designated as p-dihydroxybenzene; the empirical formula is C6 H6 O2; molecular weight is 110.0.</Description>
</NDC>
<NDC>
<NDCCode>62032-510-60</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (62032-510-60) * 30 mL in 1 BOTTLE, PLASTIC (62032-119-10) * 60 mL in 1 BOTTLE, PLASTIC * 60 mL in 1 BOTTLE, PLASTIC * 28.5 g in 1 BOTTLE, PLASTIC * 57 g in 1 BOTTLE, PLASTIC (62032-117-36) * 28.5 g in 1 BOTTLE, PLASTIC (62032-115-10)</PackageDescription>
<NDC11Code>62032-0510-60</NDC11Code>
<ProductNDC>62032-510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Condition And Enhance System</ProprietaryName>
<ProprietaryNameSuffix>Travel-size Non-surgical</ProprietaryNameSuffix>
<NonProprietaryName>Hydroquinone, Octinoxate, And Zinc Oxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20070820</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>OMP, INC.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>The gradual bleaching of hyperpigmented skin conditions such as chloasma, melasma, freckles, senile lentigines, and other unwanted areas of melanin hyperpigmentation.</IndicationAndUsage>
<Description>Hydroquinone is 1,4-benzenediol. Hydroquinone occurs as fine, white needles. The drug is freely soluble in water and in alcohol. Chemically, hydroquinone is designated as p-dihydroxybenzene; the empirical formula is C6 H6 O2; molecular weight is 110.0. Obagi® Condition & Enhance Blender contains Hydroquinone USP 40 mg/gm in a base of purified water, glycerin, cetyl alcohol, PPG-2 myristyl ether propionate, sodium lauryl sulfate, TEA-salicylate, lactic acid, phenyl trimethicone, tocopheryl acetate, sodium metabisulfite, ascorbic acid, methylparaben, saponins, disodium EDTA, BHT, and propylparaben. Obagi® Condition & Enhance Clear contains Hydroquinone USP 40 mg/gm in a base of purified water, cetyl alcohol, glycerin, sodium lauryl sulfate, stearyl alcohol, tocopheryl acetate, ascorbic acid, sodium metabisulfite, lactic acid, saponins, disodium EDTA, methylparaben, BHT, propylparaben, and butylparaben.</Description>
</NDC>
<NDC>
<NDCCode>63323-117-28</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-117-28) / 20 mL in 1 VIAL, SINGLE-DOSE (63323-117-41) </PackageDescription>
<NDC11Code>63323-0117-28</NDC11Code>
<ProductNDC>63323-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluorouracil</ProprietaryName>
<NonProprietaryName>Fluorouracil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20000712</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040279</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>FLUOROURACIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000712</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluorouracil is indicated for the treatment of patients with. Adenocarcinoma of the Colon and Rectum. Adenocarcinoma of the Breast. Gastric Adenocarcinoma. Pancreatic Adenocarcinoma.</IndicationAndUsage>
<Description>Fluorouracil injection, USP, a nucleoside metabolic inhibitor, is a colorless to yellow aqueous, sterile, nonpyrogenic injectable solution for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. C4H3FN2O2 M.W. 130.08.</Description>
</NDC>
<NDC>
<NDCCode>67868-117-90</NDCCode>
<PackageDescription>28 g in 1 TUBE (67868-117-90)</PackageDescription>
<NDC11Code>67868-0117-90</NDC11Code>
<ProductNDC>67868-117</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Benzocaine And Resorcinol</ProprietaryName>
<NonProprietaryName>Benzocaine And Resorcinol</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090519</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Pharma Pac, LLC</LabelerName>
<SubstanceName>BENZOCAINE; RESORCINOL</SubstanceName>
<StrengthNumber>200; 20</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>71288-117-28</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-117-28) / 26.3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0117-28</NDC11Code>
<ProductNDC>71288-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine</ProprietaryName>
<NonProprietaryName>Gemcitabine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212129</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>38</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1), 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2), 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3), 4 as a single agent for the treatment of pancreatic cancer. (1.4).</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy- 2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows. Gemcitabine HCl is a white to off-white solid with a molecular formula of C 9H 11F 2N 3O 4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.55 mg, 1.14 grams, or 2.28 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>72205-117-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (72205-117-28) </PackageDescription>
<NDC11Code>72205-0117-28</NDC11Code>
<ProductNDC>72205-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214824</ApplicationNumber>
<LabelerName>Novadoz Pharmaceuticals LLC</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sunitinib malate capsule is a kinase inhibitor indicated for.</IndicationAndUsage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.56.The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. Sunitinib malate capsules, for oral use, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, mannitol, magnesium stearate and pregelatinized starch as inactive ingredients.In addition 12.5 mg capsule shell contains gelatin, titanium dioxide and red iron oxide. The white printing ink contains shellac, propylene glycol, potassium hydroxide and titanium dioxide. In addition 25 mg capsule shell contains gelatin, titanium dioxide, yellow iron oxide, black iron oxide and red iron oxide. The white printing ink contains shellac, propylene glycol, potassium hydroxide and titanium dioxide. In addition 37.5 mg capsule shell contains gelatin, titanium dioxide and yellow iron oxide. The black printing ink contains shellac, propylene glycol, potassium hydroxide and black iron oxide. In addition 50 mg capsule shell contains gelatin, titanium dioxide, yellow iron oxide, red iron oxide and black iron oxide. The white printing ink contains shellac, propylene glycol, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>72789-117-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE, PLASTIC (72789-117-28) </PackageDescription>
<NDC11Code>72789-0117-28</NDC11Code>
<ProductNDC>72789-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-10-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m 2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>67046-079-28</NDCCode>
<PackageDescription>28 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (67046-079-28)</PackageDescription>
<NDC11Code>67046-0079-28</NDC11Code>
<ProductNDC>67046-079</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075932</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM ). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see CLINICAL STUDIES( 14) ] . The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see CLINICAL STUDIES( 14) ].</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. BuPROPion Hydrochloride Extended-Release Tablets, USP (SR) are supplied for oral administration as 100 mg (aquamarine), 150 mg (plum), and 200 mg (light pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: carnauba wax, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, hypromellose, titanium dioxide, polyethylene glycol and polysorbate. In addition, the 100 mg tablet contains FD&C blue No. 1 lake and 150 mg tablet contains FD&C red No. 40 lake and FD&C blue No. 2 lake and the 200 mg tablet contains FD&C red No. 40 lake and FD&C yellow No. 6 lake. This product meets USP Drug Release Test #2.</Description>
</NDC>
<NDC>
<NDCCode>67046-082-28</NDCCode>
<PackageDescription>28 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (67046-082-28)</PackageDescription>
<NDC11Code>67046-0082-28</NDC11Code>
<ProductNDC>67046-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077284</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (XL) is an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD) and prevention of seasonal affective disorder (SAD). Periodically reevaluate long-term usefulness for the individual patient. ( 1).</IndicationAndUsage>
<Description>Bupropion Hydrochloride Extended-Release Tablets USP (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: dehydrated alcohol, ethylcellulose, hydrochloric acid, hydroxypropylcellulose, methacrylic acid copolymer, povidone, silicon dioxide, hydrogenated vegetable oil and ethyl alcohol. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test 8.</Description>
</NDC>
<NDC>
<NDCCode>67046-083-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BLISTER PACK (67046-083-28)</PackageDescription>
<NDC11Code>67046-0083-28</NDC11Code>
<ProductNDC>67046-083</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170920</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065061</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS],Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clindamycin hydrochloride capsules, USP are indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin hydrochloride capsules, USP are also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin hydrochloride capsules, USP are the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules, USP and other antibacterial drugs, clindamycin hydrochloride capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride, USP equivalent to 150 mg or 300 mg of clindamycin. Inactive ingredients: 150 mg - black iron oxide, corn starch, D&C Yellow #10, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide; 300 mg - black iron oxide, corn starch, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide. The structural formula is represented below. C 18H 33ClN 2O 5SHCl M.W. 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6, 7, 8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo-α-D- galacto-octopyranoside monohydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>67046-084-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BLISTER PACK (67046-084-28)</PackageDescription>
<NDC11Code>67046-0084-28</NDC11Code>
<ProductNDC>67046-084</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA063083</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride and other antibacterial drugs, clindamycin hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride. The structural formula is represented below. Clindamycin Hydrochloride Capsules USP (equivalent to 150 mg or 300 mg clindamycin) contain the following inactive ingredients: anhydrous lactose, magnesium stearate, starch (corn) and talc. The capsule shells contain: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, silicon dioxide, sodium lauryl sulfate, and titanium dioxide. The 150 mg capsule shell also contains black iron oxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-085-28</NDCCode>
<PackageDescription>28 CAPSULE, GELATIN COATED in 1 BLISTER PACK (67046-085-28)</PackageDescription>
<NDC11Code>67046-0085-28</NDC11Code>
<ProductNDC>67046-085</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065194</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin the physician should consider the nature of the infection and the suitability of less toxic alternatives (eg, erythromycin). : 1 Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis and postsurgical vaginal cuff infection., 2 Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections., 3 Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections., 4 Pneumococci: Serious respiratory tract infections.</IndicationAndUsage>
<Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP, intended for oral administration, contain clindamycin hydrochloride equivalent to 150 mg or 300 mg of clindamycin. In addition, they also contain the following inactive ingredients: D&C yellow # 10, FD&C blue #1, gelatin, lactose monohydrate, magnesium stearate, pregelatinized starch and titanium dioxide. The structural formula is represented below. Molecular Formula: C18H33CIN2O5SHCl. Molecular Weight: 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4- propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>67046-094-28</NDCCode>
<PackageDescription>28 TABLET in 1 BLISTER PACK (67046-094-28)</PackageDescription>
<NDC11Code>67046-0094-28</NDC11Code>
<ProductNDC>67046-094</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070974</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CLONIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clonidine hydrochloride tablets, USP are indicated in the treatment of hypertension. Clonidine hydrochloride tablets may be employed alone or concomitantly with other antihypertensive agents.</IndicationAndUsage>
<Description>Clonidine hydrochloride, USP is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg, and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. The following inactive ingredients are contained in these products: corn starch, D&C yellow #10 Aluminum Lake, FD&C yellow #6 Aluminum Lake (Sunset Yellow Lake), lactose monohydrate, magnesium stearate, and sodium starch glycolate. Clonidine hydrochloride, USP is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. Clonidine hydrochloride, USP is an odorless, bitter, white, crystalline substance soluble in water and alcohol.</Description>
</NDC>
<NDC>
<NDCCode>67046-097-28</NDCCode>
<PackageDescription>28 TABLET in 1 BLISTER PACK (67046-097-28)</PackageDescription>
<NDC11Code>67046-0097-28</NDC11Code>
<ProductNDC>67046-097</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Chlorpheniramine Maleate</ProprietaryName>
<NonProprietaryName>Chlorpheniramine Maleate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170919</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CHLORPHENIRAMINE MALEATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 itchy nose or throat, 3 itchy watery eyes, 4 sneezing.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67046-099-28</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BLISTER PACK (67046-099-28)</PackageDescription>
<NDC11Code>67046-0099-28</NDC11Code>
<ProductNDC>67046-099</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clopidogrel Bisulfate</ProprietaryName>
<NonProprietaryName>Clopidogrel Bisulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076273</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CLOPIDOGREL BISULFATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE],P2Y12 Platelet Inhibitor [EPC],P2Y12 Receptor Antagonists [MoA],Cytochrome P450 2C8 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<Description>Clopidogrel bisulfate USP is a thienopyridine class inhibitor of P2Y 12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C 16H 16Cl NO 2SH 2SO 4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as white, film coated, round, biconvex tablets debossed with “R” on one side and “196” on other side. Each tablet contains 97.875 mg of clopidogrel bisulfate which is the molar equivalent to 75 mg of clopidogrel base. Each tablet contains colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol and microcrystalline cellulose as inactive ingredients. The film coating contains hypromellose 2910-5cP, polyethylene glycol 400 and titanium dioxide.</Description>
</NDC>
</NDCList>