{
"NDC": [
{
"NDCCode": "67046-1312-3",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (67046-1312-3) ",
"NDC11Code": "67046-1312-03",
"ProductNDC": "67046-1312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20241112",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091672",
"LabelerName": "Coupler LLC",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241112",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the:. Treatment of active duodenal ulcer in adults ( 1.1) . Eradication of Helicobacter pylorito reduce the risk of duodenal ulcer recurrence in adults ( 1.2) . Treatment of active benign gastric ulcer in adults ( 1.3) . Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) . Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) . Pathologic hypersecretory conditions in adults ( 1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42 g/mol. The structural formula is:. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac."
},
{
"NDCCode": "36987-1312-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1312-3)",
"NDC11Code": "36987-1312-03",
"ProductNDC": "36987-1312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cherry Bing",
"NonProprietaryName": "Cherry Bing",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "SOUR CHERRY",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1312-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-1312-3) ",
"NDC11Code": "37662-1312-03",
"ProductNDC": "37662-1312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Veratrum Viride",
"NonProprietaryName": "Veratrum Viride",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220811",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "VERATRUM VIRIDE ROOT",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220811",
"SamplePackage": "N"
},
{
"NDCCode": "53713-1312-3",
"PackageDescription": "12 TRAY in 1 CARTON (53713-1312-3) > 312 INJECTION, POWDER, FOR SOLUTION in 1 TRAY",
"NDC11Code": "53713-1312-03",
"ProductNDC": "53713-1312",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Peginterferon Alfa-2b",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"StartMarketingDate": "20110329",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "SCHERING PLOUGH BRINNY CO",
"SubstanceName": "PEGINTERFERON ALFA-2B",
"StrengthNumber": "888",
"StrengthUnit": "ug/1",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "70771-1312-3",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (70771-1312-3) ",
"NDC11Code": "70771-1312-03",
"ProductNDC": "70771-1312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desvenlafaxine",
"NonProprietaryName": "Desvenlafaxine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204020",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "DESVENLAFAXINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180508",
"SamplePackage": "N"
},
{
"NDCCode": "0069-1312-02",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (0069-1312-02) / 100 mL in 1 BOTTLE, GLASS (0069-1312-01) ",
"NDC11Code": "00069-1312-02",
"ProductNDC": "0069-1312",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190809",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190809",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "0409-1312-30",
"PackageDescription": "10 CARTRIDGE in 1 CARTON (0409-1312-30) / 1 mL in 1 CARTRIDGE (0409-1312-03) ",
"NDC11Code": "00409-1312-30",
"ProductNDC": "0409-1312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20111201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA200403",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111201",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone Hydrochloride Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Hydromorphone Hydrochloride Injection is an opioid agonist and available as an aqueous sterile solution, for use for intravenous, intramuscular and subcutaneous administration. It contains hydromorphone as active pharmaceutical ingredient in the form of hydrochloride salt. The chemical name of hydromorphone hydrochloride is 4,5α- epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 321.8 and it has the following chemical structure. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Each mL of Hydromorphone Hydrochloride Injection sterile solution contains 1 mg, 2 mg, or 4 mg of Hydromorphone Hydrochloride USP, equivalent to 0.89 mg, 1.77 mg or 3.55 mg of hydromorphone free base, respectively, 0.24 mg of Lactic Acid USP, 5.40 mg of Sodium Chloride as isotonicity agent, 8.93 mg of Sodium Lactate USP as buffering agent, and Lactic Acid USP and Sodium Hydroxide NF as pH adjusters, in Water for Injection. Hydromorphone Hydrochloride Injection pH range is 3.5 to 5.5. ."
},
{
"NDCCode": "0409-1312-36",
"PackageDescription": "10 SYRINGE in 1 CELLO PACK (0409-1312-36) / 1 mL in 1 SYRINGE (0409-1312-16) ",
"NDC11Code": "00409-1312-36",
"ProductNDC": "0409-1312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20210201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA200403",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-02-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210201",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone Hydrochloride Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Hydromorphone Hydrochloride Injection is available as an aqueous sterile solution, for use in intravenous, intramuscular and subcutaneous administration, and contains hydromorphone as active pharmaceutical ingredient in the form hydrochloride salt. Hydromorphone hydrochloride is an opioid agonist. The chemical name of hydromorphone hydrochloride is 4,5α- epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 321.8 and it has the following chemical structure. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Each mL of Hydromorphone Hydrochloride Injection sterile solution contains 0.5 mg, 1 mg or 2 mg of Hydromorphone Hydrochloride USP, equivalent to 0.44 mg, 0.89 mg or 1.77 mg of hydromorphone free base, respectively, 0.24 mg of Lactic Acid USP, 5.40 mg of Sodium Chloride as isotonicity agent, 8.93 mg of Sodium Lactate USP as buffering agent, and Lactic Acid USP and Sodium Hydroxide NF as pH adjusters, in Water for Injection. Hydromorphone Hydrochloride Injection pH range is 3.5 to 5.5."
},
{
"NDCCode": "0527-1312-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (0527-1312-01) ",
"NDC11Code": "00527-1312-01",
"ProductNDC": "0527-1312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butalbital, Aspirin, Caffeine And Codeine Phosphate",
"NonProprietaryName": "Butalbital, Aspirin, Caffeine And Codeine Phosphate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19980831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074951",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ASPIRIN; BUTALBITAL; CAFFEINE; CODEINE PHOSPHATE",
"StrengthNumber": "325; 50; 40; 30",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Full Opioid Agonists [MoA], Methylxanthine [EPC], Nonsteroidal Anti-inflammatory Drug [EPC], Opioid Agonist [EPC], Platelet Aggregation Inhibitor [EPC], Xanthines [CS]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19980831",
"SamplePackage": "N",
"IndicationAndUsage": "Butalbital, Aspirin, Caffeine and Codeine Phosphate Capsules are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy of butalbital, aspirin, caffeine and codeine phosphate capsules is derived from 2 multi-clinic trials that compared patients with tension headache randomly assigned to 4 parallel treatments: 1) butalbital, aspirin, caffeine and codeine; 2) codeine; 3) butalbital, aspirin and caffeine; 4) placebo. Response was assessed over the course of the first 4 hours of each of 2 distinct headaches, separated by at least 24 hours. The combination product of butalbital, aspirin, caffeine and codeine proved statistically significantly superior to each of its components and to placebo on measures of pain relief. Evidence supporting the efficacy and safety of butalbital, aspirin, caffeine and codeine in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because codeine and butalbital are habit-forming and potentially abusable.",
"Description": "Each capsule for oral administration contains. codeine phosphate, USP . . . . . . . . . . . . 30 mg (1/2 gr)butalbital, USP . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mgcaffeine, USP . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mgaspirin, USP . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 mg. Codeine phosphate occurs as fine, white, needle-shaped crystals, or white, crystalline powder. It is affected by light. Its chemical name is 7,8-didehydro-4,5α-epoxy-3-methoxy-17- methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate. Its molecular weight is 406.37 and its molecular formula is C18H21NO3H3PO4½H2O. Butalbital, 5-allyl-5-isobutyl-barbituric acid, a white odorless crystalline powder, is a short- to intermediate-acting barbiturate. Its molecular weight is 224.26 and its molecular formula is C11H16N2O3. Caffeine, 1,3,7-trimethylxanthine, is a central nervous stimulant which occurs as a white powder or white glistening needles. Its molecular weight is (anhydrous) 194.19 and its molecular formula is C8H10N4O2. Aspirin is benzoic acid, 2-(acetyloxy)-, with a molecular formula of C9H8O4 and its molecular weight is 180.16. Inactive Ingredients: D&C Yellow #10, D&C Yellow #10 Aluminum Lake, D&C Red #33, D&C Red #28, FD&C Blue #1, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Blue #10 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, microcrystalline cellulose, pregelatinized starch, talc, titanium dioxide, stearic acid, colloidal silicon dioxide."
},
{
"NDCCode": "43742-1312-1",
"PackageDescription": "30 mL in 1 BOTTLE, DROPPER (43742-1312-1) ",
"NDC11Code": "43742-1312-01",
"ProductNDC": "43742-1312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Metox",
"NonProprietaryName": "Allium Sativum, Berberis Vulgaris, Glycyrrhiza Glabra, Lappa Major, Stillingia Sylvatica, Trifolium Pratense, Ascorbicum Acidum, Cysteinum, L-methionine, Phytolacca Decandra, Thyroidinum (suis), Carbolicum Acidum, Formalinum, Lycopodium Clavatum, Natrum Muriaticum, Nux Vomica, Aluminum Metallicum, Antimonium Crudum, Argentum Metallicum, Arsenicum Album, Aurum Metallicum, Baryta Carbonica, Beryllium Metallicum, Bismuthum Metallicum, Boron, Bromium, Cadmium Metallicum, Carbolicum Acidum, Formalinum",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20180727",
"EndMarketingDate": "20251023",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Deseret Biologicals, Inc.",
"SubstanceName": "ALUMINUM; ANTIMONY TRISULFIDE; ARCTIUM LAPPA ROOT; ARSENIC TRIOXIDE; ASCORBIC ACID; BARIUM CARBONATE; BERBERIS VULGARIS ROOT BARK; BERYLLIUM; BISMUTH; BORON; BROMINE; CADMIUM; CERIUM; CESIUM CHLORIDE; CHROMIUM; COBALT; COPPER; CYSTEINE; DYSPROSIUM; ERBIUM; EUROPIUM; FORMALDEHYDE; GADOLINIUM; GARLIC; GERMANIUM SESQUIOXIDE; GLYCYRRHIZA GLABRA; GOLD; HOLMIUM; INDIUM; IODINE; IRIDIUM; IRON; LANTHANUM; LEAD; LITHIUM CARBONATE; LYCOPODIUM CLAVATUM SPORE; MAGNESIUM; MANGANESE; MERCURIUS SOLUBILIS; METHIONINE; MOLYBDENUM; NEODYMIUM OXIDE; NICKEL; NIOBIUM; OSMIUM; PALLADIUM; PHENOL; PHOSPHORUS; PHYTOLACCA AMERICANA ROOT; PLATINUM; POTASSIUM CARBONATE; PRASEODYMIUM; RHODIUM; RUBIDIUM NITRITE; SAMARIUM; SELENIUM; SILVER; SODIUM CHLORIDE; STILLINGIA SYLVATICA ROOT; STRONTIUM CARBONATE; STRYCHNOS NUX-VOMICA SEED; SULFUR; SUS SCROFA THYROID; TANTALUM; TERBIUM; THALLIUM; TIN; TRIBASIC CALCIUM PHOSPHATE; TRIFOLIUM PRATENSE FLOWER; URANYL NITRATE HEXAHYDRATE; VANADIUM; YTTERBIUM OXIDE; ZINC",
"StrengthNumber": "12; 12; 3; 12; 6; 12; 3; 12; 12; 12; 12; 12; 12; 12; 8; 8; 8; 6; 12; 12; 12; 12; 12; 3; 12; 3; 12; 12; 12; 8; 8; 8; 14; 12; 8; 12; 8; 8; 12; 8; 8; 12; 12; 30; 12; 12; 12; 8; 8; 12; 8; 12; 12; 12; 12; 8; 12; 8; 3; 8; 12; 8; 8; 30; 12; 12; 12; 8; 3; 12; 8; 12; 8",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Ascorbic Acid [CS], Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Copper [CS], Copper-containing Intrauterine Device [EPC], Decreased Embryonic Implantation [PE], Decreased Sperm Motility [PE], Dietary Proteins [CS], Dietary Proteins [CS], Increased Coagulation Factor Activity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Inhibit Ovum Fertilization [PE], Mood Stabilizer [EPC], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Plant Proteins [CS], Plant Proteins [CS], Plant Proteins [CS], Seed Storage Proteins [CS], Standardized Chemical Allergen [EPC], Standardized Chemical Allergen [EPC], Standardized Chemical Allergen [EPC], Standardized Chemical Allergen [EPC], Standardized Chemical Allergen [EPC], Vitamin C [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-10-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180727",
"EndMarketingDatePackage": "20251023",
"SamplePackage": "N",
"IndicationAndUsage": "For temporary relief of symptoms related to heavy metal toxicity including cough, poor concentration, nausea, vomiting, occasional diarrhea, stomach pain, headache, sweating, and a metallic taste in the mouth.**. **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration."
},
{
"NDCCode": "48951-1312-4",
"PackageDescription": "50 g in 1 BOTTLE, GLASS (48951-1312-4) ",
"NDC11Code": "48951-1312-04",
"ProductNDC": "48951-1312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Apis Eucalyptus Special Order",
"NonProprietaryName": "Apis Eucalyptus Special Order",
"DosageFormName": "POWDER",
"RouteName": "ORAL",
"StartMarketingDate": "20090901",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Uriel Pharmacy Inc.",
"SubstanceName": "APIS MELLIFERA; EUCALYPTUS GUM; ATROPA BELLADONNA",
"StrengthNumber": "3; 3; 3",
"StrengthUnit": "[hp_X]/g; [hp_X]/g; [hp_X]/g",
"Status": "Deprecated",
"LastUpdate": "2021-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20090901",
"SamplePackage": "N"
},
{
"NDCCode": "51662-1312-1",
"PackageDescription": "10 mL in 1 VIAL, SINGLE-DOSE (51662-1312-1) ",
"NDC11Code": "51662-1312-01",
"ProductNDC": "51662-1312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181018",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208418",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181018",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of Calcium Gluconate Injection for long term use has not been established.",
"Description": "Calcium Gluconate Injection is a sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial, or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "51672-1312-0",
"PackageDescription": "1 TUBE in 1 CARTON (51672-1312-0) / 22 g in 1 TUBE",
"NDC11Code": "51672-1312-00",
"ProductNDC": "51672-1312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mupirocin",
"NonProprietaryName": "Mupirocin",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20050923",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065170",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "MUPIROCIN",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Pharm_Classes": "RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050923",
"SamplePackage": "N",
"IndicationAndUsage": "Mupirocin Ointment USP, 2% is indicated for the topical treatment of impetigo due to susceptible isolates of Staphylococcus aureus (S. aureus)and Streptococcus pyogenes (S. pyogenes).",
"Description": "Mupirocin Ointment USP, 2% contains the RNA synthetase inhibitor antibacterial, mupirocin. The chemical name is ( E)-(2 S,3 R,4 R,5 S)-5-[(2 S,3 S,4 S,5 S)-2,3-epoxy-5-hydroxy-4-methylhexyl] tetrahydro-3,4-dihydroxy-ß-methyl-2 H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26H 44O 9, and the molecular weight is 500.6. The structural formula of mupirocin is:. Each gram of mupirocin ointment, 2% contains 20 mg mupirocin in a water-miscible ointment base (polyethylene glycol ointment) consisting of polyethylene glycol 400 and polyethylene glycol 3350."
},
{
"NDCCode": "51672-1312-1",
"PackageDescription": "1 TUBE in 1 CARTON (51672-1312-1) / 15 g in 1 TUBE",
"NDC11Code": "51672-1312-01",
"ProductNDC": "51672-1312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mupirocin",
"NonProprietaryName": "Mupirocin",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20050923",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065170",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "MUPIROCIN",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Pharm_Classes": "RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050923",
"SamplePackage": "N",
"IndicationAndUsage": "Mupirocin Ointment USP, 2% is indicated for the topical treatment of impetigo due to susceptible isolates of Staphylococcus aureus (S. aureus)and Streptococcus pyogenes (S. pyogenes).",
"Description": "Mupirocin Ointment USP, 2% contains the RNA synthetase inhibitor antibacterial, mupirocin. The chemical name is ( E)-(2 S,3 R,4 R,5 S)-5-[(2 S,3 S,4 S,5 S)-2,3-epoxy-5-hydroxy-4-methylhexyl] tetrahydro-3,4-dihydroxy-ß-methyl-2 H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26H 44O 9, and the molecular weight is 500.6. The structural formula of mupirocin is:. Each gram of mupirocin ointment, 2% contains 20 mg mupirocin in a water-miscible ointment base (polyethylene glycol ointment) consisting of polyethylene glycol 400 and polyethylene glycol 3350."
},
{
"NDCCode": "51672-1312-2",
"PackageDescription": "1 TUBE in 1 CARTON (51672-1312-2) / 30 g in 1 TUBE",
"NDC11Code": "51672-1312-02",
"ProductNDC": "51672-1312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mupirocin",
"NonProprietaryName": "Mupirocin",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20050923",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065170",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "MUPIROCIN",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Pharm_Classes": "RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050923",
"SamplePackage": "N",
"IndicationAndUsage": "Mupirocin Ointment USP, 2% is indicated for the topical treatment of impetigo due to susceptible isolates of Staphylococcus aureus (S. aureus)and Streptococcus pyogenes (S. pyogenes).",
"Description": "Mupirocin Ointment USP, 2% contains the RNA synthetase inhibitor antibacterial, mupirocin. The chemical name is ( E)-(2 S,3 R,4 R,5 S)-5-[(2 S,3 S,4 S,5 S)-2,3-epoxy-5-hydroxy-4-methylhexyl] tetrahydro-3,4-dihydroxy-ß-methyl-2 H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26H 44O 9, and the molecular weight is 500.6. The structural formula of mupirocin is:. Each gram of mupirocin ointment, 2% contains 20 mg mupirocin in a water-miscible ointment base (polyethylene glycol ointment) consisting of polyethylene glycol 400 and polyethylene glycol 3350."
},
{
"NDCCode": "67046-0003-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0003-3) ",
"NDC11Code": "67046-0003-03",
"ProductNDC": "67046-0003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20241218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241218",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)]."
},
{
"NDCCode": "67046-0007-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0007-3) ",
"NDC11Code": "67046-0007-03",
"ProductNDC": "67046-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260505",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203346",
"LabelerName": "Coupler LLC",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260505",
"SamplePackage": "N",
"IndicationAndUsage": "Alprazolam tablets are indicated for the: : 1 acute treatment of generalized anxiety disorder (GAD) in adults., 2 treatment of panic disorder (PD), with or without agoraphobia in adults.",
"Description": "Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam USP is a white to off-white, crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam tablet USP, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium 85% with sodium benzoate 15%, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition, the 0.5 mg tablet contains FD&C Yellow # 6 aluminum lake and the 1 mg tablet contains FD&C Blue No. 2 lake."
},
{
"NDCCode": "67046-0015-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0015-3) ",
"NDC11Code": "67046-0015-03",
"ProductNDC": "67046-0015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260424",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065256",
"LabelerName": "Coupler LLC",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "875",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260424",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. .",
"Description": "Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "67046-0038-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0038-3) ",
"NDC11Code": "67046-0038-03",
"ProductNDC": "67046-0038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201504",
"LabelerName": "Coupler LLC",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241218",
"SamplePackage": "N",
"IndicationAndUsage": "Quetiapine is an atypical antipsychotic indicated for the treatment of. · Schizophrenia ( 1.1). · Bipolar I disorder manic episodes ( 1.2). · Bipolar disorder, depressive episodes ( 1.2).",
"Description": "Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f] [1,4]thiazepin-11-yl-1-piperazinyl) ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets, USP is supplied for oral administration as 25 mg (round peach), 50 mg (round, white), 100 mg (round yellow), 150 mg (round, off white to light yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic dicalcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg, 150 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 150 mg tablet contains 172.70 mg of quetiapine fumarate USP equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.27 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.40 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.54 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine."
},
{
"NDCCode": "67046-0040-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0040-3) ",
"NDC11Code": "67046-0040-03",
"ProductNDC": "67046-0040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040715",
"LabelerName": "Coupler LLC",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260526",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).",
"Description": "Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "67046-0041-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0041-3) ",
"NDC11Code": "67046-0041-03",
"ProductNDC": "67046-0041",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260424",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040715",
"LabelerName": "Coupler LLC",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260424",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).",
"Description": "Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "67046-0053-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0053-3) ",
"NDC11Code": "67046-0053-03",
"ProductNDC": "67046-0053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol",
"NonProprietaryName": "Haloperidol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071173",
"LabelerName": "Coupler LLC",
"SubstanceName": "HALOPERIDOL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250702",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.",
"Description": "Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. C21H23ClFNO2375.87. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&C Red No. 40 Aluminum Lake."
},
{
"NDCCode": "67046-0057-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0057-3) ",
"NDC11Code": "67046-0057-03",
"ProductNDC": "67046-0057",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meloxicam",
"NonProprietaryName": "Meloxicam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MELOXICAM",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260427",
"SamplePackage": "N",
"IndicationAndUsage": "Meloxicam Tablets are non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥ 60 kg ( 1.3) .",
"Description": "Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each yellow meloxicam tablet contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula. Meloxicam, USP is a pale yellow powder, practically insoluble in water, slightly soluble in acetone, soluble in dimethylformamide, very slightly soluble in ethanol (96 %) and in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Each meloxicam tablet, USP intended for oral administration contains 7.5 mg or 15 mg of meloxicam. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium citrate dihydrate."
},
{
"NDCCode": "67046-0059-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0059-3) ",
"NDC11Code": "67046-0059-03",
"ProductNDC": "67046-0059",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260622",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Coupler LLC",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "32.4",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260622",
"SamplePackage": "N",
"IndicationAndUsage": "1. Sedative 2. Anticonvulsant - For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5- phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula:. C 12H 12N 2O 3 M.W. = 232.24 Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg, or 97.2 mg of phenobarbital, USP. Inactive ingredients include:colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and magnesium stearate."
},
{
"NDCCode": "67046-0060-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0060-3) ",
"NDC11Code": "67046-0060-03",
"ProductNDC": "67046-0060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naltrexone Hydrochloride",
"NonProprietaryName": "Naltrexone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260527",
"EndMarketingDate": "20271130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075274",
"LabelerName": "Coupler LLC",
"SubstanceName": "NALTREXONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20260527",
"EndMarketingDatePackage": "20271130",
"SamplePackage": "N",
"IndicationAndUsage": "Naltrexone Hydrochloride Tablets USP are indicated in the treatment of alcohol dependence and for the blockade of the effects of exogenously administered opioids. Naltrexone Hydrochloride Tablets USP have not been shown to provide any therapeutic benefit except as part of an appropriate plan of management for the addictions.",
"Description": "Naltrexone hydrochloride, an opioid antagonist, are a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5a)-. The structural formula is as follows. Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone Hydrochloride Tablets USP are available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride. Naltrexone Hydrochloride Tablets USP also contain: carnauba wax powder, colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide and yellow iron oxide."
},
{
"NDCCode": "67046-0068-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0068-3) ",
"NDC11Code": "67046-0068-03",
"ProductNDC": "67046-0068",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260427",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].",
"Description": "Mirtazapine tablets, USP contain mirtazapine USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino [2,1-a] pyrido [2,3-c][2] benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture:. Mirtazapine is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine USP, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine USP. Each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black, and iron oxide yellow."
},
{
"NDCCode": "67046-0072-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0072-3) ",
"NDC11Code": "67046-0072-03",
"ProductNDC": "67046-0072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202862",
"LabelerName": "Coupler LLC",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260619",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine is an atypical antipsychotic indicated. As oral formulation for the:. · Treatment of schizophrenia. ( 1.1). · Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. ( 14.1). · Adolescents (ages 13-17): Efficacy was established in one 6-week trial in patients with schizophrenia ( 14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.1). · Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. ( 1.2). · Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. ( 14.2). · Adolescents (ages 13-17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder ( 14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.2). · Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. ( 1.3). · Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. ( 1.2). · Efficacy was established in two 6-week clinical trials in adults ( 14.2). Maintenance efficacy has not been systematically evaluated. As Olanzapine and Fluoxetine in Combination for the: Treatment of depressive episodes associated with bipolar I disorder. ( 1.5) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax. Treatment of treatment resistant depression. ( 1.6) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.",
"Description": "Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg)."
},
{
"NDCCode": "67046-0113-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0113-3) ",
"NDC11Code": "67046-0113-03",
"ProductNDC": "67046-0113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078216",
"LabelerName": "Coupler LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260610",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .",
"Description": "Citalopram tablets, USP contain citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide, USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram, USP 10 mg tablets are film-coated, round shaped tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, oval shaped, scored tablets containing citalopram hydrobromide, in strengths equivalent to 20 mg or 40 mg citalopram base. The tablets also contain the following inactive ingredients: copovidone, corn starch, croscarmellose sodium, ferric oxide red, ferric oxide yellow, glycerin, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "67046-0127-3",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (67046-0127-3) ",
"NDC11Code": "67046-0127-03",
"ProductNDC": "67046-0127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064076",
"LabelerName": "Coupler LLC",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260504",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat.",
"Description": "Amoxicillin is a semisynthetic antibacterial, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[(R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4- thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Amoxicillin Capsules, USP. Each amoxicillin capsule, with yellow opaque cap and body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The 250 mg capsule is imprinted AMOX 250 on one side and GG 848 on the other side; the 500 mg capsule is imprinted AMOX 500 on one side and GG 849 on the other side. Inactive ingredients: Capsule shells - yellow ferric oxide, titanium dioxide, gelatin, black ferric oxide, shellac, propylene glycol, potassium hydroxide and ammonium hydroxide; Capsule contents - cellulose microcrystalline and magnesium stearate. Meets USP Dissolution Test 2. Amoxicillin Tablets, USP. Each film coated tablet contains 500 mg or 875 mg of amoxicillin as the trihydrate. The tablets are oval-shaped and white to yellowish. The 500 mg tablet is unscored, embossed GG-961 on one side and 500 on the other side. The 875 mg tablet is scored and embossed GG-962 on one side and 875 on the other side. In addition each amoxicillin tablet contains these inactive ingredients in each 500 mg or 875 mg tablet: colloidal silicon dioxide, crospovidone, ethylcellulose aqueous dispersion, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, triethyl citrate, and titanium dioxide. Amoxicillin for Oral Suspension, USP. Each 5 mL of reconstituted suspension contains 125 mg, 200 mg, 250 mg or 400 mg amoxicillin as the trihydrate. Each 5 mL of the 125 mg, 200 mg, 250 mg, and 400 mg reconstituted suspension contains 0.30 mEq (6.95 mg) of sodium. Amoxicillin trihydrate for oral suspension 125 mg/5 mL, 200 mg/5 mL, 250 mg/5 mL and 400 mg/5 mL are fruity flavored pink suspensions. Inactive ingredients: anhydrous citric acid, colloidal silicon dioxide, flavorings: raspberry, strawberry, refrachessement, FD&C Red 40, sodium benzoate, sodium citrate, sucrose, and xantham gum."
},
{
"NDCCode": "67046-0135-3",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (67046-0135-3) ",
"NDC11Code": "67046-0135-03",
"ProductNDC": "67046-0135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062396",
"LabelerName": "Coupler LLC",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260526",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline Hyclate Capsules, USP is an antibacterial drug synthetically derived from oxytetracycline. The structural formula of doxycycline hyclate is. with a molecular formula of (C 22H 24N 2O 8HCL) 2C 2H 6OH 2O and a molecular weight of 1025.88. The chemical designation for doxycycline is 2-Naphthacenecarboxamide, 4-(dimethylamino)-1, 4, 4a, 5, 5a, 6, -11, 12a-octahydro-3,5,10, 12, 12a-pentahydroxy-6-methyl-1, 11-dioxo-monohydrochloride, compound with ethanol(2:1), monohydrate, [4s-(4α, 4aα, 5α, 5aα, 6α, 12aα)]. Doxycycline is a yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. The 50 mg and 100 mg capsule shells contain: gelatin, FD&C Blue #1 and titanium dioxide. The printing ink may contain: Shellac Glaze, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, SD-45 Alcohol, FD&C Blue #2, FD&C Red #40, FD&C Blue #1, D&C Yellow #10."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67046-1312-3</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (67046-1312-3) </PackageDescription>
<NDC11Code>67046-1312-03</NDC11Code>
<ProductNDC>67046-1312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241112</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091672</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the:. Treatment of active duodenal ulcer in adults ( 1.1) . Eradication of Helicobacter pylorito reduce the risk of duodenal ulcer recurrence in adults ( 1.2) . Treatment of active benign gastric ulcer in adults ( 1.3) . Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) . Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) . Pathologic hypersecretory conditions in adults ( 1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42 g/mol. The structural formula is:. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac.</Description>
</NDC>
<NDC>
<NDCCode>36987-1312-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1312-3)</PackageDescription>
<NDC11Code>36987-1312-03</NDC11Code>
<ProductNDC>36987-1312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cherry Bing</ProprietaryName>
<NonProprietaryName>Cherry Bing</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>SOUR CHERRY</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1312-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-1312-3) </PackageDescription>
<NDC11Code>37662-1312-03</NDC11Code>
<ProductNDC>37662-1312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Veratrum Viride</ProprietaryName>
<NonProprietaryName>Veratrum Viride</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220811</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>VERATRUM VIRIDE ROOT</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220811</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>53713-1312-3</NDCCode>
<PackageDescription>12 TRAY in 1 CARTON (53713-1312-3) > 312 INJECTION, POWDER, FOR SOLUTION in 1 TRAY</PackageDescription>
<NDC11Code>53713-1312-03</NDC11Code>
<ProductNDC>53713-1312</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Peginterferon Alfa-2b</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<StartMarketingDate>20110329</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>SCHERING PLOUGH BRINNY CO</LabelerName>
<SubstanceName>PEGINTERFERON ALFA-2B</SubstanceName>
<StrengthNumber>888</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>70771-1312-3</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (70771-1312-3) </PackageDescription>
<NDC11Code>70771-1312-03</NDC11Code>
<ProductNDC>70771-1312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desvenlafaxine</ProprietaryName>
<NonProprietaryName>Desvenlafaxine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204020</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>DESVENLAFAXINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0069-1312-02</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0069-1312-02) / 100 mL in 1 BOTTLE, GLASS (0069-1312-01) </PackageDescription>
<NDC11Code>00069-1312-02</NDC11Code>
<ProductNDC>0069-1312</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190809</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>0409-1312-30</NDCCode>
<PackageDescription>10 CARTRIDGE in 1 CARTON (0409-1312-30) / 1 mL in 1 CARTRIDGE (0409-1312-03) </PackageDescription>
<NDC11Code>00409-1312-30</NDC11Code>
<ProductNDC>0409-1312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20111201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA200403</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone Hydrochloride Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Hydromorphone Hydrochloride Injection is an opioid agonist and available as an aqueous sterile solution, for use for intravenous, intramuscular and subcutaneous administration. It contains hydromorphone as active pharmaceutical ingredient in the form of hydrochloride salt. The chemical name of hydromorphone hydrochloride is 4,5α- epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 321.8 and it has the following chemical structure. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Each mL of Hydromorphone Hydrochloride Injection sterile solution contains 1 mg, 2 mg, or 4 mg of Hydromorphone Hydrochloride USP, equivalent to 0.89 mg, 1.77 mg or 3.55 mg of hydromorphone free base, respectively, 0.24 mg of Lactic Acid USP, 5.40 mg of Sodium Chloride as isotonicity agent, 8.93 mg of Sodium Lactate USP as buffering agent, and Lactic Acid USP and Sodium Hydroxide NF as pH adjusters, in Water for Injection. Hydromorphone Hydrochloride Injection pH range is 3.5 to 5.5. .</Description>
</NDC>
<NDC>
<NDCCode>0409-1312-36</NDCCode>
<PackageDescription>10 SYRINGE in 1 CELLO PACK (0409-1312-36) / 1 mL in 1 SYRINGE (0409-1312-16) </PackageDescription>
<NDC11Code>00409-1312-36</NDC11Code>
<ProductNDC>0409-1312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA200403</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone Hydrochloride Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Hydromorphone Hydrochloride Injection is available as an aqueous sterile solution, for use in intravenous, intramuscular and subcutaneous administration, and contains hydromorphone as active pharmaceutical ingredient in the form hydrochloride salt. Hydromorphone hydrochloride is an opioid agonist. The chemical name of hydromorphone hydrochloride is 4,5α- epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 321.8 and it has the following chemical structure. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Each mL of Hydromorphone Hydrochloride Injection sterile solution contains 0.5 mg, 1 mg or 2 mg of Hydromorphone Hydrochloride USP, equivalent to 0.44 mg, 0.89 mg or 1.77 mg of hydromorphone free base, respectively, 0.24 mg of Lactic Acid USP, 5.40 mg of Sodium Chloride as isotonicity agent, 8.93 mg of Sodium Lactate USP as buffering agent, and Lactic Acid USP and Sodium Hydroxide NF as pH adjusters, in Water for Injection. Hydromorphone Hydrochloride Injection pH range is 3.5 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>0527-1312-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (0527-1312-01) </PackageDescription>
<NDC11Code>00527-1312-01</NDC11Code>
<ProductNDC>0527-1312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butalbital, Aspirin, Caffeine And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Butalbital, Aspirin, Caffeine And Codeine Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19980831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074951</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ASPIRIN; BUTALBITAL; CAFFEINE; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>325; 50; 40; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Full Opioid Agonists [MoA], Methylxanthine [EPC], Nonsteroidal Anti-inflammatory Drug [EPC], Opioid Agonist [EPC], Platelet Aggregation Inhibitor [EPC], Xanthines [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Butalbital, Aspirin, Caffeine and Codeine Phosphate Capsules are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy of butalbital, aspirin, caffeine and codeine phosphate capsules is derived from 2 multi-clinic trials that compared patients with tension headache randomly assigned to 4 parallel treatments: 1) butalbital, aspirin, caffeine and codeine; 2) codeine; 3) butalbital, aspirin and caffeine; 4) placebo. Response was assessed over the course of the first 4 hours of each of 2 distinct headaches, separated by at least 24 hours. The combination product of butalbital, aspirin, caffeine and codeine proved statistically significantly superior to each of its components and to placebo on measures of pain relief. Evidence supporting the efficacy and safety of butalbital, aspirin, caffeine and codeine in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because codeine and butalbital are habit-forming and potentially abusable.</IndicationAndUsage>
<Description>Each capsule for oral administration contains. codeine phosphate, USP . . . . . . . . . . . . 30 mg (1/2 gr)butalbital, USP . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mgcaffeine, USP . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mgaspirin, USP . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 mg. Codeine phosphate occurs as fine, white, needle-shaped crystals, or white, crystalline powder. It is affected by light. Its chemical name is 7,8-didehydro-4,5α-epoxy-3-methoxy-17- methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate. Its molecular weight is 406.37 and its molecular formula is C18H21NO3H3PO4½H2O. Butalbital, 5-allyl-5-isobutyl-barbituric acid, a white odorless crystalline powder, is a short- to intermediate-acting barbiturate. Its molecular weight is 224.26 and its molecular formula is C11H16N2O3. Caffeine, 1,3,7-trimethylxanthine, is a central nervous stimulant which occurs as a white powder or white glistening needles. Its molecular weight is (anhydrous) 194.19 and its molecular formula is C8H10N4O2. Aspirin is benzoic acid, 2-(acetyloxy)-, with a molecular formula of C9H8O4 and its molecular weight is 180.16. Inactive Ingredients: D&C Yellow #10, D&C Yellow #10 Aluminum Lake, D&C Red #33, D&C Red #28, FD&C Blue #1, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Blue #10 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, microcrystalline cellulose, pregelatinized starch, talc, titanium dioxide, stearic acid, colloidal silicon dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43742-1312-1</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, DROPPER (43742-1312-1) </PackageDescription>
<NDC11Code>43742-1312-01</NDC11Code>
<ProductNDC>43742-1312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Metox</ProprietaryName>
<NonProprietaryName>Allium Sativum, Berberis Vulgaris, Glycyrrhiza Glabra, Lappa Major, Stillingia Sylvatica, Trifolium Pratense, Ascorbicum Acidum, Cysteinum, L-methionine, Phytolacca Decandra, Thyroidinum (suis), Carbolicum Acidum, Formalinum, Lycopodium Clavatum, Natrum Muriaticum, Nux Vomica, Aluminum Metallicum, Antimonium Crudum, Argentum Metallicum, Arsenicum Album, Aurum Metallicum, Baryta Carbonica, Beryllium Metallicum, Bismuthum Metallicum, Boron, Bromium, Cadmium Metallicum, Carbolicum Acidum, Formalinum</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180727</StartMarketingDate>
<EndMarketingDate>20251023</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Deseret Biologicals, Inc.</LabelerName>
<SubstanceName>ALUMINUM; ANTIMONY TRISULFIDE; ARCTIUM LAPPA ROOT; ARSENIC TRIOXIDE; ASCORBIC ACID; BARIUM CARBONATE; BERBERIS VULGARIS ROOT BARK; BERYLLIUM; BISMUTH; BORON; BROMINE; CADMIUM; CERIUM; CESIUM CHLORIDE; CHROMIUM; COBALT; COPPER; CYSTEINE; DYSPROSIUM; ERBIUM; EUROPIUM; FORMALDEHYDE; GADOLINIUM; GARLIC; GERMANIUM SESQUIOXIDE; GLYCYRRHIZA GLABRA; GOLD; HOLMIUM; INDIUM; IODINE; IRIDIUM; IRON; LANTHANUM; LEAD; LITHIUM CARBONATE; LYCOPODIUM CLAVATUM SPORE; MAGNESIUM; MANGANESE; MERCURIUS SOLUBILIS; METHIONINE; MOLYBDENUM; NEODYMIUM OXIDE; NICKEL; NIOBIUM; OSMIUM; PALLADIUM; PHENOL; PHOSPHORUS; PHYTOLACCA AMERICANA ROOT; PLATINUM; POTASSIUM CARBONATE; PRASEODYMIUM; RHODIUM; RUBIDIUM NITRITE; SAMARIUM; SELENIUM; SILVER; SODIUM CHLORIDE; STILLINGIA SYLVATICA ROOT; STRONTIUM CARBONATE; STRYCHNOS NUX-VOMICA SEED; SULFUR; SUS SCROFA THYROID; TANTALUM; TERBIUM; THALLIUM; TIN; TRIBASIC CALCIUM PHOSPHATE; TRIFOLIUM PRATENSE FLOWER; URANYL NITRATE HEXAHYDRATE; VANADIUM; YTTERBIUM OXIDE; ZINC</SubstanceName>
<StrengthNumber>12; 12; 3; 12; 6; 12; 3; 12; 12; 12; 12; 12; 12; 12; 8; 8; 8; 6; 12; 12; 12; 12; 12; 3; 12; 3; 12; 12; 12; 8; 8; 8; 14; 12; 8; 12; 8; 8; 12; 8; 8; 12; 12; 30; 12; 12; 12; 8; 8; 12; 8; 12; 12; 12; 12; 8; 12; 8; 3; 8; 12; 8; 8; 30; 12; 12; 12; 8; 3; 12; 8; 12; 8</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Ascorbic Acid [CS], Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Copper [CS], Copper-containing Intrauterine Device [EPC], Decreased Embryonic Implantation [PE], Decreased Sperm Motility [PE], Dietary Proteins [CS], Dietary Proteins [CS], Increased Coagulation Factor Activity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Inhibit Ovum Fertilization [PE], Mood Stabilizer [EPC], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Plant Proteins [CS], Plant Proteins [CS], Plant Proteins [CS], Seed Storage Proteins [CS], Standardized Chemical Allergen [EPC], Standardized Chemical Allergen [EPC], Standardized Chemical Allergen [EPC], Standardized Chemical Allergen [EPC], Standardized Chemical Allergen [EPC], Vitamin C [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180727</StartMarketingDatePackage>
<EndMarketingDatePackage>20251023</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For temporary relief of symptoms related to heavy metal toxicity including cough, poor concentration, nausea, vomiting, occasional diarrhea, stomach pain, headache, sweating, and a metallic taste in the mouth.**. **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>48951-1312-4</NDCCode>
<PackageDescription>50 g in 1 BOTTLE, GLASS (48951-1312-4) </PackageDescription>
<NDC11Code>48951-1312-04</NDC11Code>
<ProductNDC>48951-1312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Apis Eucalyptus Special Order</ProprietaryName>
<NonProprietaryName>Apis Eucalyptus Special Order</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090901</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Uriel Pharmacy Inc.</LabelerName>
<SubstanceName>APIS MELLIFERA; EUCALYPTUS GUM; ATROPA BELLADONNA</SubstanceName>
<StrengthNumber>3; 3; 3</StrengthNumber>
<StrengthUnit>[hp_X]/g; [hp_X]/g; [hp_X]/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51662-1312-1</NDCCode>
<PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (51662-1312-1) </PackageDescription>
<NDC11Code>51662-1312-01</NDC11Code>
<ProductNDC>51662-1312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181018</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208418</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of Calcium Gluconate Injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium Gluconate Injection is a sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial, or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>51672-1312-0</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (51672-1312-0) / 22 g in 1 TUBE</PackageDescription>
<NDC11Code>51672-1312-00</NDC11Code>
<ProductNDC>51672-1312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mupirocin</ProprietaryName>
<NonProprietaryName>Mupirocin</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20050923</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065170</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>MUPIROCIN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mupirocin Ointment USP, 2% is indicated for the topical treatment of impetigo due to susceptible isolates of Staphylococcus aureus (S. aureus)and Streptococcus pyogenes (S. pyogenes).</IndicationAndUsage>
<Description>Mupirocin Ointment USP, 2% contains the RNA synthetase inhibitor antibacterial, mupirocin. The chemical name is ( E)-(2 S,3 R,4 R,5 S)-5-[(2 S,3 S,4 S,5 S)-2,3-epoxy-5-hydroxy-4-methylhexyl] tetrahydro-3,4-dihydroxy-ß-methyl-2 H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26H 44O 9, and the molecular weight is 500.6. The structural formula of mupirocin is:. Each gram of mupirocin ointment, 2% contains 20 mg mupirocin in a water-miscible ointment base (polyethylene glycol ointment) consisting of polyethylene glycol 400 and polyethylene glycol 3350.</Description>
</NDC>
<NDC>
<NDCCode>51672-1312-1</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (51672-1312-1) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>51672-1312-01</NDC11Code>
<ProductNDC>51672-1312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mupirocin</ProprietaryName>
<NonProprietaryName>Mupirocin</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20050923</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065170</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>MUPIROCIN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mupirocin Ointment USP, 2% is indicated for the topical treatment of impetigo due to susceptible isolates of Staphylococcus aureus (S. aureus)and Streptococcus pyogenes (S. pyogenes).</IndicationAndUsage>
<Description>Mupirocin Ointment USP, 2% contains the RNA synthetase inhibitor antibacterial, mupirocin. The chemical name is ( E)-(2 S,3 R,4 R,5 S)-5-[(2 S,3 S,4 S,5 S)-2,3-epoxy-5-hydroxy-4-methylhexyl] tetrahydro-3,4-dihydroxy-ß-methyl-2 H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26H 44O 9, and the molecular weight is 500.6. The structural formula of mupirocin is:. Each gram of mupirocin ointment, 2% contains 20 mg mupirocin in a water-miscible ointment base (polyethylene glycol ointment) consisting of polyethylene glycol 400 and polyethylene glycol 3350.</Description>
</NDC>
<NDC>
<NDCCode>51672-1312-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (51672-1312-2) / 30 g in 1 TUBE</PackageDescription>
<NDC11Code>51672-1312-02</NDC11Code>
<ProductNDC>51672-1312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mupirocin</ProprietaryName>
<NonProprietaryName>Mupirocin</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20050923</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065170</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>MUPIROCIN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mupirocin Ointment USP, 2% is indicated for the topical treatment of impetigo due to susceptible isolates of Staphylococcus aureus (S. aureus)and Streptococcus pyogenes (S. pyogenes).</IndicationAndUsage>
<Description>Mupirocin Ointment USP, 2% contains the RNA synthetase inhibitor antibacterial, mupirocin. The chemical name is ( E)-(2 S,3 R,4 R,5 S)-5-[(2 S,3 S,4 S,5 S)-2,3-epoxy-5-hydroxy-4-methylhexyl] tetrahydro-3,4-dihydroxy-ß-methyl-2 H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26H 44O 9, and the molecular weight is 500.6. The structural formula of mupirocin is:. Each gram of mupirocin ointment, 2% contains 20 mg mupirocin in a water-miscible ointment base (polyethylene glycol ointment) consisting of polyethylene glycol 400 and polyethylene glycol 3350.</Description>
</NDC>
<NDC>
<NDCCode>67046-0003-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0003-3) </PackageDescription>
<NDC11Code>67046-0003-03</NDC11Code>
<ProductNDC>67046-0003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67046-0007-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0007-3) </PackageDescription>
<NDC11Code>67046-0007-03</NDC11Code>
<ProductNDC>67046-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260505</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203346</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alprazolam tablets are indicated for the: : 1 acute treatment of generalized anxiety disorder (GAD) in adults., 2 treatment of panic disorder (PD), with or without agoraphobia in adults.</IndicationAndUsage>
<Description>Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam USP is a white to off-white, crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam tablet USP, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium 85% with sodium benzoate 15%, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition, the 0.5 mg tablet contains FD&C Yellow # 6 aluminum lake and the 1 mg tablet contains FD&C Blue No. 2 lake.</Description>
</NDC>
<NDC>
<NDCCode>67046-0015-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0015-3) </PackageDescription>
<NDC11Code>67046-0015-03</NDC11Code>
<ProductNDC>67046-0015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260424</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065256</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>875</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260424</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. .</IndicationAndUsage>
<Description>Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0038-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0038-3) </PackageDescription>
<NDC11Code>67046-0038-03</NDC11Code>
<ProductNDC>67046-0038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201504</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quetiapine is an atypical antipsychotic indicated for the treatment of. · Schizophrenia ( 1.1). · Bipolar I disorder manic episodes ( 1.2). · Bipolar disorder, depressive episodes ( 1.2).</IndicationAndUsage>
<Description>Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f] [1,4]thiazepin-11-yl-1-piperazinyl) ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets, USP is supplied for oral administration as 25 mg (round peach), 50 mg (round, white), 100 mg (round yellow), 150 mg (round, off white to light yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic dicalcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg, 150 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 150 mg tablet contains 172.70 mg of quetiapine fumarate USP equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.27 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.40 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.54 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine.</Description>
</NDC>
<NDC>
<NDCCode>67046-0040-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0040-3) </PackageDescription>
<NDC11Code>67046-0040-03</NDC11Code>
<ProductNDC>67046-0040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040715</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
<Description>Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>67046-0041-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0041-3) </PackageDescription>
<NDC11Code>67046-0041-03</NDC11Code>
<ProductNDC>67046-0041</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260424</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040715</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260424</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
<Description>Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>67046-0053-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0053-3) </PackageDescription>
<NDC11Code>67046-0053-03</NDC11Code>
<ProductNDC>67046-0053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol</ProprietaryName>
<NonProprietaryName>Haloperidol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071173</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>HALOPERIDOL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
<Description>Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. C21H23ClFNO2375.87. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&C Red No. 40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>67046-0057-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0057-3) </PackageDescription>
<NDC11Code>67046-0057-03</NDC11Code>
<ProductNDC>67046-0057</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meloxicam</ProprietaryName>
<NonProprietaryName>Meloxicam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MELOXICAM</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meloxicam Tablets are non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥ 60 kg ( 1.3) .</IndicationAndUsage>
<Description>Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each yellow meloxicam tablet contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula. Meloxicam, USP is a pale yellow powder, practically insoluble in water, slightly soluble in acetone, soluble in dimethylformamide, very slightly soluble in ethanol (96 %) and in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Each meloxicam tablet, USP intended for oral administration contains 7.5 mg or 15 mg of meloxicam. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium citrate dihydrate.</Description>
</NDC>
<NDC>
<NDCCode>67046-0059-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0059-3) </PackageDescription>
<NDC11Code>67046-0059-03</NDC11Code>
<ProductNDC>67046-0059</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260622</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>32.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1. Sedative 2. Anticonvulsant - For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5- phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula:. C 12H 12N 2O 3 M.W. = 232.24 Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg, or 97.2 mg of phenobarbital, USP. Inactive ingredients include:colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>67046-0060-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0060-3) </PackageDescription>
<NDC11Code>67046-0060-03</NDC11Code>
<ProductNDC>67046-0060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naltrexone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naltrexone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260527</StartMarketingDate>
<EndMarketingDate>20271130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075274</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>NALTREXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20260527</StartMarketingDatePackage>
<EndMarketingDatePackage>20271130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naltrexone Hydrochloride Tablets USP are indicated in the treatment of alcohol dependence and for the blockade of the effects of exogenously administered opioids. Naltrexone Hydrochloride Tablets USP have not been shown to provide any therapeutic benefit except as part of an appropriate plan of management for the addictions.</IndicationAndUsage>
<Description>Naltrexone hydrochloride, an opioid antagonist, are a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5a)-. The structural formula is as follows. Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone Hydrochloride Tablets USP are available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride. Naltrexone Hydrochloride Tablets USP also contain: carnauba wax powder, colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0068-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0068-3) </PackageDescription>
<NDC11Code>67046-0068-03</NDC11Code>
<ProductNDC>67046-0068</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Mirtazapine tablets, USP contain mirtazapine USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino [2,1-a] pyrido [2,3-c][2] benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture:. Mirtazapine is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine USP, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine USP. Each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black, and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>67046-0072-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0072-3) </PackageDescription>
<NDC11Code>67046-0072-03</NDC11Code>
<ProductNDC>67046-0072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202862</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine is an atypical antipsychotic indicated. As oral formulation for the:. · Treatment of schizophrenia. ( 1.1). · Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. ( 14.1). · Adolescents (ages 13-17): Efficacy was established in one 6-week trial in patients with schizophrenia ( 14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.1). · Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. ( 1.2). · Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. ( 14.2). · Adolescents (ages 13-17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder ( 14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.2). · Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. ( 1.3). · Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. ( 1.2). · Efficacy was established in two 6-week clinical trials in adults ( 14.2). Maintenance efficacy has not been systematically evaluated. As Olanzapine and Fluoxetine in Combination for the: Treatment of depressive episodes associated with bipolar I disorder. ( 1.5) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax. Treatment of treatment resistant depression. ( 1.6) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.</IndicationAndUsage>
<Description>Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg).</Description>
</NDC>
<NDC>
<NDCCode>67046-0113-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0113-3) </PackageDescription>
<NDC11Code>67046-0113-03</NDC11Code>
<ProductNDC>67046-0113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078216</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>Citalopram tablets, USP contain citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide, USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram, USP 10 mg tablets are film-coated, round shaped tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, oval shaped, scored tablets containing citalopram hydrobromide, in strengths equivalent to 20 mg or 40 mg citalopram base. The tablets also contain the following inactive ingredients: copovidone, corn starch, croscarmellose sodium, ferric oxide red, ferric oxide yellow, glycerin, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0127-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (67046-0127-3) </PackageDescription>
<NDC11Code>67046-0127-03</NDC11Code>
<ProductNDC>67046-0127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064076</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat.</IndicationAndUsage>
<Description>Amoxicillin is a semisynthetic antibacterial, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[(R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4- thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Amoxicillin Capsules, USP. Each amoxicillin capsule, with yellow opaque cap and body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The 250 mg capsule is imprinted AMOX 250 on one side and GG 848 on the other side; the 500 mg capsule is imprinted AMOX 500 on one side and GG 849 on the other side. Inactive ingredients: Capsule shells - yellow ferric oxide, titanium dioxide, gelatin, black ferric oxide, shellac, propylene glycol, potassium hydroxide and ammonium hydroxide; Capsule contents - cellulose microcrystalline and magnesium stearate. Meets USP Dissolution Test 2. Amoxicillin Tablets, USP. Each film coated tablet contains 500 mg or 875 mg of amoxicillin as the trihydrate. The tablets are oval-shaped and white to yellowish. The 500 mg tablet is unscored, embossed GG-961 on one side and 500 on the other side. The 875 mg tablet is scored and embossed GG-962 on one side and 875 on the other side. In addition each amoxicillin tablet contains these inactive ingredients in each 500 mg or 875 mg tablet: colloidal silicon dioxide, crospovidone, ethylcellulose aqueous dispersion, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, triethyl citrate, and titanium dioxide. Amoxicillin for Oral Suspension, USP. Each 5 mL of reconstituted suspension contains 125 mg, 200 mg, 250 mg or 400 mg amoxicillin as the trihydrate. Each 5 mL of the 125 mg, 200 mg, 250 mg, and 400 mg reconstituted suspension contains 0.30 mEq (6.95 mg) of sodium. Amoxicillin trihydrate for oral suspension 125 mg/5 mL, 200 mg/5 mL, 250 mg/5 mL and 400 mg/5 mL are fruity flavored pink suspensions. Inactive ingredients: anhydrous citric acid, colloidal silicon dioxide, flavorings: raspberry, strawberry, refrachessement, FD&C Red 40, sodium benzoate, sodium citrate, sucrose, and xantham gum.</Description>
</NDC>
<NDC>
<NDCCode>67046-0135-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (67046-0135-3) </PackageDescription>
<NDC11Code>67046-0135-03</NDC11Code>
<ProductNDC>67046-0135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062396</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline Hyclate Capsules, USP is an antibacterial drug synthetically derived from oxytetracycline. The structural formula of doxycycline hyclate is. with a molecular formula of (C 22H 24N 2O 8HCL) 2C 2H 6OH 2O and a molecular weight of 1025.88. The chemical designation for doxycycline is 2-Naphthacenecarboxamide, 4-(dimethylamino)-1, 4, 4a, 5, 5a, 6, -11, 12a-octahydro-3,5,10, 12, 12a-pentahydroxy-6-methyl-1, 11-dioxo-monohydrochloride, compound with ethanol(2:1), monohydrate, [4s-(4α, 4aα, 5α, 5aα, 6α, 12aα)]. Doxycycline is a yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. The 50 mg and 100 mg capsule shells contain: gelatin, FD&C Blue #1 and titanium dioxide. The printing ink may contain: Shellac Glaze, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, SD-45 Alcohol, FD&C Blue #2, FD&C Red #40, FD&C Blue #1, D&C Yellow #10.</Description>
</NDC>
</NDCList>