{
"NDC": [
{
"NDCCode": "67046-1531-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-1531-3) ",
"NDC11Code": "67046-1531-03",
"ProductNDC": "67046-1531",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amantadine",
"NonProprietaryName": "Amantadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250313",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214284",
"LabelerName": "Coupler LLC",
"SubstanceName": "AMANTADINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Influenza A M2 Protein Inhibitor [EPC], M2 Protein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250313",
"SamplePackage": "N",
"IndicationAndUsage": "Amantadine hydrochloride tablets are indicated for the prophylaxis and treatment of signs and symptoms of infection caused by various strains of influenza A virus. Amantadine hydrochloride tablets are also indicated in the treatment of parkinsonism and drug-induced extrapyramidal reactions. Influenza A Prophylaxis. Amantadine hydrochloride tablets are indicated for chemoprophylaxis against signs and symptoms of influenza A virus infection. Because amantadine hydrochloride tablets do not completely prevent the host immune response to influenza A infection, individuals who take this drug may still develop immune responses to natural disease or vaccination and may be protected when later exposed to antigenically related viruses. Following vaccination during an influenza A outbreak, amantadine hydrochloride tablets prophylaxis should be considered for the 2- to 4-week time period required to develop an antibody response. Influenza A Treatment. Amantadine hydrochloride tablets are also indicated in the treatment of uncomplicated respiratory tract illness caused by influenza A virus strains especially when administered early in the course of illness. There are no well-controlled clinical studies demonstrating that treatment with amantadine hydrochloride tablets will avoid the development of influenza A virus pneumonitis or other complications in high risk patients. There is no clinical evidence indicating that amantadine hydrochloride tablets are effective in the prophylaxis or treatment of viral respiratory tract illnesses other than those caused by influenza A virus strains. The following points should be considered before initiating treatment or prophylaxis with amantadine hydrochloride tablets: 1 Amantadine hydrochloride tablets are not a substitute for early vaccination on an annual basis as recommended by the Centers for Disease Control and Prevention Advisory Committee on Immunization Practices., 2 Influenza viruses change over time. Emergence of resistance mutations could decrease drug effectiveness. Other factors (for example, changes in viral virulence) might also diminish clinical benefit of antiviral drugs. Prescribers should consider available information on influenza drug susceptibility patterns and treatment effects when deciding whether to use amantadine hydrochloride tablets.",
"Description": "Amantadine hydrochloride, USP is designated generically as amantadine hydrochloride and chemically as 1-adamantanamine hydrochloride. Amantadine hydrochloride, USP is a stable white or practically white crystalline powder, freely soluble in water, soluble in alcohol and in chloroform. Amantadine hydrochloride, USP has pharmacological actions as both an anti-Parkinson and an antiviral drug. Each tablet intended for oral administration contains 100 mg amantadine hydrochloride, USP and has the following inactive ingredients: microcrystalline cellulose, povidone K-30, povidone K-90, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate and FD&C Yellow No. 6 Aluminium Lake."
},
{
"NDCCode": "36987-1531-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1531-3)",
"NDC11Code": "36987-1531-03",
"ProductNDC": "36987-1531",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brazil Nut",
"NonProprietaryName": "Brazil Nut",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "BRAZIL NUT",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Nut Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1531-3",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (37662-1531-3) ",
"NDC11Code": "37662-1531-03",
"ProductNDC": "37662-1531",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mercurius Iodatus Flavus",
"NonProprietaryName": "Mercurius Iodatus Flavus",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220914",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "MERCUROUS IODIDE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220914",
"SamplePackage": "N"
},
{
"NDCCode": "51552-1531-3",
"PackageDescription": "5 g in 1 CONTAINER (51552-1531-3)",
"NDC11Code": "51552-1531-03",
"ProductNDC": "51552-1531",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Testosterone Micro Soy",
"DosageFormName": "POWDER",
"StartMarketingDate": "20161015",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Fagron Inc",
"SubstanceName": "TESTOSTERONE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "51662-1531-3",
"PackageDescription": "50 POUCH in 1 CARTON (51662-1531-3) / 1 CARTON in 1 POUCH (51662-1531-2) / 1 SYRINGE, GLASS in 1 CARTON / 10 mL in 1 SYRINGE, GLASS",
"NDC11Code": "51662-1531-03",
"ProductNDC": "51662-1531",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210425",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209359",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210425",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Hypotension associated with Septic Shock. Epinephrine Injection USP, 1 mg/10 mL (0.1 mg/mL) is indicated to increase mean arterial blood pressure in adult patients with hypotension associated with septic shock.",
"Description": "Epinephrine Injection USP, 1 mg/10 mL (0.1 mg/mL) is supplied as a sterile aqueous solution with a pH range of 2.3–3.5, that is clear, colorless, and nonpyrogenic. Each milliliter contains 0.1 mg epinephrine, 8.16 mg sodium chloride, 0.46 mg sodium metabisulfite, and 2.13 mg citric acid, anhydrous and 0.41 mg sodium citrate, dihydrate added as buffers. Additional citric acid and/or sodium citrate may be added for pH adjustment. The solution contains no preservatives. This sterile solution is to be administered after dilution by the intravenous route. Epinephrine is a sympathomimetic catecholamine (adrenergic agent) designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, crystalline powder. It has the following structural formula. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin."
},
{
"NDCCode": "63629-1531-3",
"PackageDescription": "30 CAPSULE, GELATIN COATED in 1 BOTTLE (63629-1531-3) ",
"NDC11Code": "63629-1531-03",
"ProductNDC": "63629-1531",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19840507",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062396",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-11-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20051101",
"SamplePackage": "N"
},
{
"NDCCode": "67296-1531-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-1531-3) ",
"NDC11Code": "67296-1531-03",
"ProductNDC": "67296-1531",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207419",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "325; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20170411",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated, or are not expected to be tolerated. Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet, for oral administration contains. Oxycodone hydrochloride, USP………………………………………………….. 2.5 mg* (*2.5 mg oxycodone Hydrochloride is equivalent to 2.2409 mg of oxycodone.). Acetaminophen, USP……………………………………………………………… 325 mg. Oxycodone hydrochloride, USP …………………………………………………. 5 mg* (*5 mg oxycodone Hydrochloride is equivalent to 4.4815 mg of oxycodone.). Acetaminophen, USP …………………………………………………………….. 325 mg. Oxycodone hydrochloride, USP………………………………………………….. 7.5 mg* (*7.5 mg oxycodone Hydrochloride is equivalent to 6.7228 mg of oxycodone.). Acetaminophen, USP……………………………………………………………… 325 mg. Oxycodone hydrochloride, USP…………………………………………………… 10 mg* (*10 mg oxycodone Hydrochloride is equivalent to 8.9637 mg of oxycodone.). Acetaminophen, USP ……………………………………………………………... 325 mg. Inactive Ingredients. The tablets contain: colloidal silicon dioxide, croscarmellose sodium, crospovidone, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 and the 5 mg/325 mg strength contains FD&C Blue No. 1. The 7.5 mg/325 mg strength contain FD&C Yellow No. 6. The 10 mg/325 mg strength contain D&C Yellow No. 10. Oxycodone and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C18H21NO4 ∙ HCl and the molecular weight is 381.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula. [structure1]. Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.17. It may be represented by the following structural formula. [structure2]."
},
{
"NDCCode": "70518-1531-2",
"PackageDescription": "100 POUCH in 1 BOX (70518-1531-2) > 1 CAPSULE in 1 POUCH (70518-1531-3) ",
"NDC11Code": "70518-1531-02",
"ProductNDC": "70518-1531",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dok",
"NonProprietaryName": "Docusate Sodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20181015",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "DOCUSATE SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2022-08-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20201013",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1531-3",
"PackageDescription": "3 TABLET in 1 BOTTLE (71335-1531-3) ",
"NDC11Code": "71335-1531-03",
"ProductNDC": "71335-1531",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Stimulant Laxative Enteric Coated",
"NonProprietaryName": "Bisacodyl",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20000101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BISACODYL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Stimulant Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2024-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220310",
"SamplePackage": "N",
"IndicationAndUsage": "for relief of occasional constipation and irregularity. this product generally produces bowel movement in 6 to 12 hours."
},
{
"NDCCode": "0069-1531-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0069-1531-30) ",
"NDC11Code": "00069-1531-30",
"ProductNDC": "0069-1531",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daurismo",
"NonProprietaryName": "Glasdegib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181210",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210656",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "GLASDEGIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hedgehog Pathway Inhibitor [EPC], Smoothened Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181210",
"SamplePackage": "N",
"IndicationAndUsage": "DAURISMO is indicated, in combination with low-dose cytarabine, for the treatment of newly-diagnosed acute myeloid leukemia (AML) in adult patients who are ≥75 years old or who have comorbidities that preclude use of intensive induction chemotherapy.",
"Description": "DAURISMO (glasdegib) is a hedgehog pathway inhibitor. It is formulated with the maleate salt of glasdegib. The molecular formula for glasdegib maleate is C25H26N6O5. The molecular weight for glasdegib maleate is 490.51 Daltons. The chemical name of glasdegib maleate is 1-((2R,4R)-2-(1H-benzo[d]imidazol-2-yl)-1-methylpiperidin-4-yl)-3-(4-cyanophenyl) urea maleate. The molecular structure is shown below. Glasdegib maleate is a white to pale colored powder with pKa values of 1.7 and 6.1. The aqueous solubility of glasdegib maleate is 1.7 mg/mL. DAURISMO (glasdegib) is supplied as a film-coated tablet for oral use containing either 100 mg glasdegib (equivalent to 131.1 mg glasdegib maleate) or 25 mg of glasdegib (equivalent to 32.8 mg glasdegib maleate) together with microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate as inactive ingredients in the tablet. The film-coating consists of Opadry II® Beige (33G170003) and Opadry II® Yellow (33G120011) containing: hypromellose, titanium dioxide, lactose monohydrate, macrogol, triacetin, iron oxide yellow, and iron oxide red."
},
{
"NDCCode": "24286-1531-7",
"PackageDescription": "30 mL in 1 BOTTLE, WITH APPLICATOR (24286-1531-7) ",
"NDC11Code": "24286-1531-07",
"ProductNDC": "24286-1531",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "De La Cruz Gentian Violet",
"NonProprietaryName": "Gentian Violet",
"DosageFormName": "TINCTURE",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "DLC Laboratories, Inc.",
"SubstanceName": "GENTIAN VIOLET",
"StrengthNumber": "1",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171213",
"SamplePackage": "N",
"IndicationAndUsage": "First aid to help prevent infection in minor: 1 cuts, 2 scrapes, 3 burns, 4 insect bites."
},
{
"NDCCode": "24286-1531-8",
"PackageDescription": "59 mL in 1 BOTTLE, WITH APPLICATOR (24286-1531-8) ",
"NDC11Code": "24286-1531-08",
"ProductNDC": "24286-1531",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "De La Cruz Gentian Violet",
"NonProprietaryName": "Gentian Violet",
"DosageFormName": "TINCTURE",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "DLC Laboratories, Inc.",
"SubstanceName": "GENTIAN VIOLET",
"StrengthNumber": "1",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210120",
"SamplePackage": "N",
"IndicationAndUsage": "First aid to help prevent infection in minor: 1 cuts, 2 scrapes, 3 burns, 4 insect bites."
},
{
"NDCCode": "43742-1531-1",
"PackageDescription": "30 mL in 1 BOTTLE, DROPPER (43742-1531-1) ",
"NDC11Code": "43742-1531-01",
"ProductNDC": "43742-1531",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Professional Weight Support",
"NonProprietaryName": "Asclepias Vincetoxicum, Echinacea (angustifolia), Hypothalamus Suis, Hepar Suis, Kidney (suis), Methylcobalamin, Gambogia, Graphites, Nux Vomica, Phytolacca Decandra, 7-oxo-dehydroepiandrosterone 3-acetate, Adenosinum Triphosphoricum Dinatrum, Insulinum (suis), Pancreas Suis, Sarcolacticum Acidum, Proteus (vulgaris)",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20190822",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Deseret Biologicals, Inc.",
"SubstanceName": "CYNANCHUM VINCETOXICUM ROOT; ECHINACEA ANGUSTIFOLIA WHOLE; SUS SCROFA HYPOTHALAMUS; PORK LIVER; PORK KIDNEY; METHYLCOBALAMIN; GAMBOGE; GRAPHITE; STRYCHNOS NUX-VOMICA SEED; PHYTOLACCA AMERICANA ROOT; 7-OXODEHYDROEPIANDROSTERONE 3-ACETATE; ADENOSINE TRIPHOSPHATE DISODIUM; INSULIN PORK; SUS SCROFA PANCREAS; LACTIC ACID, L-; PROTEUS VULGARIS",
"StrengthNumber": "6; 6; 6; 8; 8; 8; 12; 12; 12; 12; 30; 30; 30; 30; 30; 30",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]",
"Status": "Active",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190822",
"SamplePackage": "N",
"IndicationAndUsage": " For the temporary relief of symptoms including. weight support increased appetite stress support fat metabolism support. These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration."
},
{
"NDCCode": "51662-1531-1",
"PackageDescription": "1 SYRINGE, GLASS in 1 CARTON (51662-1531-1) / 10 mL in 1 SYRINGE, GLASS",
"NDC11Code": "51662-1531-01",
"ProductNDC": "51662-1531",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210425",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209359",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210425",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Hypotension associated with Septic Shock. Epinephrine Injection USP, 1 mg/10 mL (0.1 mg/mL) is indicated to increase mean arterial blood pressure in adult patients with hypotension associated with septic shock.",
"Description": "Epinephrine Injection USP, 1 mg/10 mL (0.1 mg/mL) is supplied as a sterile aqueous solution with a pH range of 2.3–3.5, that is clear, colorless, and nonpyrogenic. Each milliliter contains 0.1 mg epinephrine, 8.16 mg sodium chloride, 0.46 mg sodium metabisulfite, and 2.13 mg citric acid, anhydrous and 0.41 mg sodium citrate, dihydrate added as buffers. Additional citric acid and/or sodium citrate may be added for pH adjustment. The solution contains no preservatives. This sterile solution is to be administered after dilution by the intravenous route. Epinephrine is a sympathomimetic catecholamine (adrenergic agent) designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, crystalline powder. It has the following structural formula. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin."
},
{
"NDCCode": "54868-1531-1",
"PackageDescription": "1 TUBE in 1 CARTON (54868-1531-1) > 7.5 g in 1 TUBE",
"NDC11Code": "54868-1531-01",
"ProductNDC": "54868-1531",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cortisporin",
"NonProprietaryName": "Neomycin Sulfate, Polymyxin B Sulfate And Hydrocortisone Acetate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "19940719",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050218",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "NEOMYCIN SULFATE; POLYMYXIN B SULFATE; HYDROCORTISONE ACETATE",
"StrengthNumber": "3.5; 10000; 5",
"StrengthUnit": "mg/g; U/g; mg/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient],Polymyxin-class Antibacterial [EPC],Polymyxins [Chemical/Ingredient],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For the treatment of corticosteroid-responsive dermatoses with secondary infection. It has not been demonstrated that this steroid-antibiotic combination provides greater benefit than the steroid component alone after 7 days of treatment (see WARNINGS).",
"Description": "CORTISPORIN Cream (neomycin and polymyxin B sulfates and hydrocortisone acetate cream, USP) is a topical antibacterial cream. Each gram contains: neomycin sulfate equivalent to 3.5 mg neomycin base, polymyxin B sulfate equivalent to 10,000 polymyxin B units, and hydrocortisone acetate 5 mg (0.5%). The inactive ingredients are liquid petrolatum, white petrolatum, propylene glycol, polyoxyethylene polyoxypropylene compound, emulsifying wax, purified water, and 0.25% methylparaben added as a preservative. Sodium hydroxide or sulfuric acid may be added to adjust pH. Neomycin sulfate is the sulfate salt of neomycin B and C, which are produced by the growth of Streptomyces fradiae Waksman (Fam. Streptomycetaceae). It has a potency equivalent of not less than 600µg of neomycin standard per mg, calculated on an anhydrous basis. The structural formulae are. Polymyxin B sulfate is the sulfate salt of polymyxin B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on an anhydrous basis. The structural formulae are. Hydrocortisone acetate is the acetate ester of hydrocortisone, an anti-inflammatory hormone. Its chemical name is 21-(acetyloxy)- 11β,17-dihydroxypregn-4-ene-3,20-dione. Its structural formula is. The base is a smooth vanishing cream with a pH of approximately 5.0."
},
{
"NDCCode": "67046-0003-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0003-3) ",
"NDC11Code": "67046-0003-03",
"ProductNDC": "67046-0003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20241218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241218",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)]."
},
{
"NDCCode": "67046-0007-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0007-3) ",
"NDC11Code": "67046-0007-03",
"ProductNDC": "67046-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260505",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203346",
"LabelerName": "Coupler LLC",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260505",
"SamplePackage": "N",
"IndicationAndUsage": "Alprazolam tablets are indicated for the: : 1 acute treatment of generalized anxiety disorder (GAD) in adults., 2 treatment of panic disorder (PD), with or without agoraphobia in adults.",
"Description": "Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam USP is a white to off-white, crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam tablet USP, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium 85% with sodium benzoate 15%, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition, the 0.5 mg tablet contains FD&C Yellow # 6 aluminum lake and the 1 mg tablet contains FD&C Blue No. 2 lake."
},
{
"NDCCode": "67046-0015-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0015-3) ",
"NDC11Code": "67046-0015-03",
"ProductNDC": "67046-0015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260424",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065256",
"LabelerName": "Coupler LLC",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "875",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260424",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. .",
"Description": "Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "67046-0038-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0038-3) ",
"NDC11Code": "67046-0038-03",
"ProductNDC": "67046-0038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201504",
"LabelerName": "Coupler LLC",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241218",
"SamplePackage": "N",
"IndicationAndUsage": "Quetiapine is an atypical antipsychotic indicated for the treatment of. · Schizophrenia ( 1.1). · Bipolar I disorder manic episodes ( 1.2). · Bipolar disorder, depressive episodes ( 1.2).",
"Description": "Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f] [1,4]thiazepin-11-yl-1-piperazinyl) ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets, USP is supplied for oral administration as 25 mg (round peach), 50 mg (round, white), 100 mg (round yellow), 150 mg (round, off white to light yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic dicalcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg, 150 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 150 mg tablet contains 172.70 mg of quetiapine fumarate USP equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.27 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.40 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.54 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine."
},
{
"NDCCode": "67046-0040-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0040-3) ",
"NDC11Code": "67046-0040-03",
"ProductNDC": "67046-0040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040715",
"LabelerName": "Coupler LLC",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260526",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).",
"Description": "Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "67046-0041-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0041-3) ",
"NDC11Code": "67046-0041-03",
"ProductNDC": "67046-0041",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260424",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040715",
"LabelerName": "Coupler LLC",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260424",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).",
"Description": "Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "67046-0053-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0053-3) ",
"NDC11Code": "67046-0053-03",
"ProductNDC": "67046-0053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol",
"NonProprietaryName": "Haloperidol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071173",
"LabelerName": "Coupler LLC",
"SubstanceName": "HALOPERIDOL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250702",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.",
"Description": "Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. C21H23ClFNO2375.87. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&C Red No. 40 Aluminum Lake."
},
{
"NDCCode": "67046-0057-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0057-3) ",
"NDC11Code": "67046-0057-03",
"ProductNDC": "67046-0057",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meloxicam",
"NonProprietaryName": "Meloxicam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MELOXICAM",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260427",
"SamplePackage": "N",
"IndicationAndUsage": "Meloxicam Tablets are non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥ 60 kg ( 1.3) .",
"Description": "Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each yellow meloxicam tablet contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula. Meloxicam, USP is a pale yellow powder, practically insoluble in water, slightly soluble in acetone, soluble in dimethylformamide, very slightly soluble in ethanol (96 %) and in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Each meloxicam tablet, USP intended for oral administration contains 7.5 mg or 15 mg of meloxicam. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium citrate dihydrate."
},
{
"NDCCode": "67046-0059-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-0059-3) ",
"NDC11Code": "67046-0059-03",
"ProductNDC": "67046-0059",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260622",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Coupler LLC",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "32.4",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260622",
"SamplePackage": "N",
"IndicationAndUsage": "1. Sedative 2. Anticonvulsant - For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5- phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula:. C 12H 12N 2O 3 M.W. = 232.24 Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg, or 97.2 mg of phenobarbital, USP. Inactive ingredients include:colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and magnesium stearate."
},
{
"NDCCode": "67046-0060-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0060-3) ",
"NDC11Code": "67046-0060-03",
"ProductNDC": "67046-0060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naltrexone Hydrochloride",
"NonProprietaryName": "Naltrexone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260527",
"EndMarketingDate": "20271130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075274",
"LabelerName": "Coupler LLC",
"SubstanceName": "NALTREXONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20260527",
"EndMarketingDatePackage": "20271130",
"SamplePackage": "N",
"IndicationAndUsage": "Naltrexone Hydrochloride Tablets USP are indicated in the treatment of alcohol dependence and for the blockade of the effects of exogenously administered opioids. Naltrexone Hydrochloride Tablets USP have not been shown to provide any therapeutic benefit except as part of an appropriate plan of management for the addictions.",
"Description": "Naltrexone hydrochloride, an opioid antagonist, are a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5a)-. The structural formula is as follows. Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone Hydrochloride Tablets USP are available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride. Naltrexone Hydrochloride Tablets USP also contain: carnauba wax powder, colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide and yellow iron oxide."
},
{
"NDCCode": "67046-0068-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0068-3) ",
"NDC11Code": "67046-0068-03",
"ProductNDC": "67046-0068",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076921",
"LabelerName": "Coupler LLC",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260427",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].",
"Description": "Mirtazapine tablets, USP contain mirtazapine USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino [2,1-a] pyrido [2,3-c][2] benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture:. Mirtazapine is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine USP, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine USP. Each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black, and iron oxide yellow."
},
{
"NDCCode": "67046-0072-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0072-3) ",
"NDC11Code": "67046-0072-03",
"ProductNDC": "67046-0072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202862",
"LabelerName": "Coupler LLC",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260619",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine is an atypical antipsychotic indicated. As oral formulation for the:. · Treatment of schizophrenia. ( 1.1). · Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. ( 14.1). · Adolescents (ages 13-17): Efficacy was established in one 6-week trial in patients with schizophrenia ( 14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.1). · Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. ( 1.2). · Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. ( 14.2). · Adolescents (ages 13-17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder ( 14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.2). · Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. ( 1.3). · Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. ( 1.2). · Efficacy was established in two 6-week clinical trials in adults ( 14.2). Maintenance efficacy has not been systematically evaluated. As Olanzapine and Fluoxetine in Combination for the: Treatment of depressive episodes associated with bipolar I disorder. ( 1.5) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax. Treatment of treatment resistant depression. ( 1.6) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.",
"Description": "Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg)."
},
{
"NDCCode": "67046-0113-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0113-3) ",
"NDC11Code": "67046-0113-03",
"ProductNDC": "67046-0113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078216",
"LabelerName": "Coupler LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260610",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .",
"Description": "Citalopram tablets, USP contain citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide, USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram, USP 10 mg tablets are film-coated, round shaped tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, oval shaped, scored tablets containing citalopram hydrobromide, in strengths equivalent to 20 mg or 40 mg citalopram base. The tablets also contain the following inactive ingredients: copovidone, corn starch, croscarmellose sodium, ferric oxide red, ferric oxide yellow, glycerin, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "67046-0127-3",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (67046-0127-3) ",
"NDC11Code": "67046-0127-03",
"ProductNDC": "67046-0127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064076",
"LabelerName": "Coupler LLC",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260504",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat.",
"Description": "Amoxicillin is a semisynthetic antibacterial, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[(R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4- thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Amoxicillin Capsules, USP. Each amoxicillin capsule, with yellow opaque cap and body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The 250 mg capsule is imprinted AMOX 250 on one side and GG 848 on the other side; the 500 mg capsule is imprinted AMOX 500 on one side and GG 849 on the other side. Inactive ingredients: Capsule shells - yellow ferric oxide, titanium dioxide, gelatin, black ferric oxide, shellac, propylene glycol, potassium hydroxide and ammonium hydroxide; Capsule contents - cellulose microcrystalline and magnesium stearate. Meets USP Dissolution Test 2. Amoxicillin Tablets, USP. Each film coated tablet contains 500 mg or 875 mg of amoxicillin as the trihydrate. The tablets are oval-shaped and white to yellowish. The 500 mg tablet is unscored, embossed GG-961 on one side and 500 on the other side. The 875 mg tablet is scored and embossed GG-962 on one side and 875 on the other side. In addition each amoxicillin tablet contains these inactive ingredients in each 500 mg or 875 mg tablet: colloidal silicon dioxide, crospovidone, ethylcellulose aqueous dispersion, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, triethyl citrate, and titanium dioxide. Amoxicillin for Oral Suspension, USP. Each 5 mL of reconstituted suspension contains 125 mg, 200 mg, 250 mg or 400 mg amoxicillin as the trihydrate. Each 5 mL of the 125 mg, 200 mg, 250 mg, and 400 mg reconstituted suspension contains 0.30 mEq (6.95 mg) of sodium. Amoxicillin trihydrate for oral suspension 125 mg/5 mL, 200 mg/5 mL, 250 mg/5 mL and 400 mg/5 mL are fruity flavored pink suspensions. Inactive ingredients: anhydrous citric acid, colloidal silicon dioxide, flavorings: raspberry, strawberry, refrachessement, FD&C Red 40, sodium benzoate, sodium citrate, sucrose, and xantham gum."
},
{
"NDCCode": "67046-0135-3",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (67046-0135-3) ",
"NDC11Code": "67046-0135-03",
"ProductNDC": "67046-0135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062396",
"LabelerName": "Coupler LLC",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260526",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline Hyclate Capsules, USP is an antibacterial drug synthetically derived from oxytetracycline. The structural formula of doxycycline hyclate is. with a molecular formula of (C 22H 24N 2O 8HCL) 2C 2H 6OH 2O and a molecular weight of 1025.88. The chemical designation for doxycycline is 2-Naphthacenecarboxamide, 4-(dimethylamino)-1, 4, 4a, 5, 5a, 6, -11, 12a-octahydro-3,5,10, 12, 12a-pentahydroxy-6-methyl-1, 11-dioxo-monohydrochloride, compound with ethanol(2:1), monohydrate, [4s-(4α, 4aα, 5α, 5aα, 6α, 12aα)]. Doxycycline is a yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. The 50 mg and 100 mg capsule shells contain: gelatin, FD&C Blue #1 and titanium dioxide. The printing ink may contain: Shellac Glaze, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, SD-45 Alcohol, FD&C Blue #2, FD&C Red #40, FD&C Blue #1, D&C Yellow #10."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67046-1531-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-1531-3) </PackageDescription>
<NDC11Code>67046-1531-03</NDC11Code>
<ProductNDC>67046-1531</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amantadine</ProprietaryName>
<NonProprietaryName>Amantadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250313</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214284</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>AMANTADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Influenza A M2 Protein Inhibitor [EPC], M2 Protein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amantadine hydrochloride tablets are indicated for the prophylaxis and treatment of signs and symptoms of infection caused by various strains of influenza A virus. Amantadine hydrochloride tablets are also indicated in the treatment of parkinsonism and drug-induced extrapyramidal reactions. Influenza A Prophylaxis. Amantadine hydrochloride tablets are indicated for chemoprophylaxis against signs and symptoms of influenza A virus infection. Because amantadine hydrochloride tablets do not completely prevent the host immune response to influenza A infection, individuals who take this drug may still develop immune responses to natural disease or vaccination and may be protected when later exposed to antigenically related viruses. Following vaccination during an influenza A outbreak, amantadine hydrochloride tablets prophylaxis should be considered for the 2- to 4-week time period required to develop an antibody response. Influenza A Treatment. Amantadine hydrochloride tablets are also indicated in the treatment of uncomplicated respiratory tract illness caused by influenza A virus strains especially when administered early in the course of illness. There are no well-controlled clinical studies demonstrating that treatment with amantadine hydrochloride tablets will avoid the development of influenza A virus pneumonitis or other complications in high risk patients. There is no clinical evidence indicating that amantadine hydrochloride tablets are effective in the prophylaxis or treatment of viral respiratory tract illnesses other than those caused by influenza A virus strains. The following points should be considered before initiating treatment or prophylaxis with amantadine hydrochloride tablets: 1 Amantadine hydrochloride tablets are not a substitute for early vaccination on an annual basis as recommended by the Centers for Disease Control and Prevention Advisory Committee on Immunization Practices., 2 Influenza viruses change over time. Emergence of resistance mutations could decrease drug effectiveness. Other factors (for example, changes in viral virulence) might also diminish clinical benefit of antiviral drugs. Prescribers should consider available information on influenza drug susceptibility patterns and treatment effects when deciding whether to use amantadine hydrochloride tablets.</IndicationAndUsage>
<Description>Amantadine hydrochloride, USP is designated generically as amantadine hydrochloride and chemically as 1-adamantanamine hydrochloride. Amantadine hydrochloride, USP is a stable white or practically white crystalline powder, freely soluble in water, soluble in alcohol and in chloroform. Amantadine hydrochloride, USP has pharmacological actions as both an anti-Parkinson and an antiviral drug. Each tablet intended for oral administration contains 100 mg amantadine hydrochloride, USP and has the following inactive ingredients: microcrystalline cellulose, povidone K-30, povidone K-90, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate and FD&C Yellow No. 6 Aluminium Lake.</Description>
</NDC>
<NDC>
<NDCCode>36987-1531-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1531-3)</PackageDescription>
<NDC11Code>36987-1531-03</NDC11Code>
<ProductNDC>36987-1531</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brazil Nut</ProprietaryName>
<NonProprietaryName>Brazil Nut</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>BRAZIL NUT</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Nut Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1531-3</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-1531-3) </PackageDescription>
<NDC11Code>37662-1531-03</NDC11Code>
<ProductNDC>37662-1531</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mercurius Iodatus Flavus</ProprietaryName>
<NonProprietaryName>Mercurius Iodatus Flavus</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220914</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>MERCUROUS IODIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51552-1531-3</NDCCode>
<PackageDescription>5 g in 1 CONTAINER (51552-1531-3)</PackageDescription>
<NDC11Code>51552-1531-03</NDC11Code>
<ProductNDC>51552-1531</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Testosterone Micro Soy</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20161015</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Fagron Inc</LabelerName>
<SubstanceName>TESTOSTERONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51662-1531-3</NDCCode>
<PackageDescription>50 POUCH in 1 CARTON (51662-1531-3) / 1 CARTON in 1 POUCH (51662-1531-2) / 1 SYRINGE, GLASS in 1 CARTON / 10 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>51662-1531-03</NDC11Code>
<ProductNDC>51662-1531</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210425</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209359</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Hypotension associated with Septic Shock. Epinephrine Injection USP, 1 mg/10 mL (0.1 mg/mL) is indicated to increase mean arterial blood pressure in adult patients with hypotension associated with septic shock.</IndicationAndUsage>
<Description>Epinephrine Injection USP, 1 mg/10 mL (0.1 mg/mL) is supplied as a sterile aqueous solution with a pH range of 2.3–3.5, that is clear, colorless, and nonpyrogenic. Each milliliter contains 0.1 mg epinephrine, 8.16 mg sodium chloride, 0.46 mg sodium metabisulfite, and 2.13 mg citric acid, anhydrous and 0.41 mg sodium citrate, dihydrate added as buffers. Additional citric acid and/or sodium citrate may be added for pH adjustment. The solution contains no preservatives. This sterile solution is to be administered after dilution by the intravenous route. Epinephrine is a sympathomimetic catecholamine (adrenergic agent) designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, crystalline powder. It has the following structural formula. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
</NDC>
<NDC>
<NDCCode>63629-1531-3</NDCCode>
<PackageDescription>30 CAPSULE, GELATIN COATED in 1 BOTTLE (63629-1531-3) </PackageDescription>
<NDC11Code>63629-1531-03</NDC11Code>
<ProductNDC>63629-1531</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19840507</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062396</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-11-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67296-1531-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-1531-3) </PackageDescription>
<NDC11Code>67296-1531-03</NDC11Code>
<ProductNDC>67296-1531</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207419</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated, or are not expected to be tolerated. Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet, for oral administration contains. Oxycodone hydrochloride, USP………………………………………………….. 2.5 mg* (*2.5 mg oxycodone Hydrochloride is equivalent to 2.2409 mg of oxycodone.). Acetaminophen, USP……………………………………………………………… 325 mg. Oxycodone hydrochloride, USP …………………………………………………. 5 mg* (*5 mg oxycodone Hydrochloride is equivalent to 4.4815 mg of oxycodone.). Acetaminophen, USP …………………………………………………………….. 325 mg. Oxycodone hydrochloride, USP………………………………………………….. 7.5 mg* (*7.5 mg oxycodone Hydrochloride is equivalent to 6.7228 mg of oxycodone.). Acetaminophen, USP……………………………………………………………… 325 mg. Oxycodone hydrochloride, USP…………………………………………………… 10 mg* (*10 mg oxycodone Hydrochloride is equivalent to 8.9637 mg of oxycodone.). Acetaminophen, USP ……………………………………………………………... 325 mg. Inactive Ingredients. The tablets contain: colloidal silicon dioxide, croscarmellose sodium, crospovidone, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 and the 5 mg/325 mg strength contains FD&C Blue No. 1. The 7.5 mg/325 mg strength contain FD&C Yellow No. 6. The 10 mg/325 mg strength contain D&C Yellow No. 10. Oxycodone and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C18H21NO4 ∙ HCl and the molecular weight is 381.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula. [structure1]. Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.17. It may be represented by the following structural formula. [structure2].</Description>
</NDC>
<NDC>
<NDCCode>70518-1531-2</NDCCode>
<PackageDescription>100 POUCH in 1 BOX (70518-1531-2) > 1 CAPSULE in 1 POUCH (70518-1531-3) </PackageDescription>
<NDC11Code>70518-1531-02</NDC11Code>
<ProductNDC>70518-1531</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dok</ProprietaryName>
<NonProprietaryName>Docusate Sodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181015</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>DOCUSATE SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-08-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1531-3</NDCCode>
<PackageDescription>3 TABLET in 1 BOTTLE (71335-1531-3) </PackageDescription>
<NDC11Code>71335-1531-03</NDC11Code>
<ProductNDC>71335-1531</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Stimulant Laxative Enteric Coated</ProprietaryName>
<NonProprietaryName>Bisacodyl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BISACODYL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Stimulant Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220310</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for relief of occasional constipation and irregularity. this product generally produces bowel movement in 6 to 12 hours.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0069-1531-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0069-1531-30) </PackageDescription>
<NDC11Code>00069-1531-30</NDC11Code>
<ProductNDC>0069-1531</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daurismo</ProprietaryName>
<NonProprietaryName>Glasdegib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181210</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210656</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>GLASDEGIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hedgehog Pathway Inhibitor [EPC], Smoothened Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DAURISMO is indicated, in combination with low-dose cytarabine, for the treatment of newly-diagnosed acute myeloid leukemia (AML) in adult patients who are ≥75 years old or who have comorbidities that preclude use of intensive induction chemotherapy.</IndicationAndUsage>
<Description>DAURISMO (glasdegib) is a hedgehog pathway inhibitor. It is formulated with the maleate salt of glasdegib. The molecular formula for glasdegib maleate is C25H26N6O5. The molecular weight for glasdegib maleate is 490.51 Daltons. The chemical name of glasdegib maleate is 1-((2R,4R)-2-(1H-benzo[d]imidazol-2-yl)-1-methylpiperidin-4-yl)-3-(4-cyanophenyl) urea maleate. The molecular structure is shown below. Glasdegib maleate is a white to pale colored powder with pKa values of 1.7 and 6.1. The aqueous solubility of glasdegib maleate is 1.7 mg/mL. DAURISMO (glasdegib) is supplied as a film-coated tablet for oral use containing either 100 mg glasdegib (equivalent to 131.1 mg glasdegib maleate) or 25 mg of glasdegib (equivalent to 32.8 mg glasdegib maleate) together with microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate as inactive ingredients in the tablet. The film-coating consists of Opadry II® Beige (33G170003) and Opadry II® Yellow (33G120011) containing: hypromellose, titanium dioxide, lactose monohydrate, macrogol, triacetin, iron oxide yellow, and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>24286-1531-7</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, WITH APPLICATOR (24286-1531-7) </PackageDescription>
<NDC11Code>24286-1531-07</NDC11Code>
<ProductNDC>24286-1531</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>De La Cruz Gentian Violet</ProprietaryName>
<NonProprietaryName>Gentian Violet</NonProprietaryName>
<DosageFormName>TINCTURE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>DLC Laboratories, Inc.</LabelerName>
<SubstanceName>GENTIAN VIOLET</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>First aid to help prevent infection in minor: 1 cuts, 2 scrapes, 3 burns, 4 insect bites.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>24286-1531-8</NDCCode>
<PackageDescription>59 mL in 1 BOTTLE, WITH APPLICATOR (24286-1531-8) </PackageDescription>
<NDC11Code>24286-1531-08</NDC11Code>
<ProductNDC>24286-1531</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>De La Cruz Gentian Violet</ProprietaryName>
<NonProprietaryName>Gentian Violet</NonProprietaryName>
<DosageFormName>TINCTURE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>DLC Laboratories, Inc.</LabelerName>
<SubstanceName>GENTIAN VIOLET</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>First aid to help prevent infection in minor: 1 cuts, 2 scrapes, 3 burns, 4 insect bites.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43742-1531-1</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, DROPPER (43742-1531-1) </PackageDescription>
<NDC11Code>43742-1531-01</NDC11Code>
<ProductNDC>43742-1531</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Professional Weight Support</ProprietaryName>
<NonProprietaryName>Asclepias Vincetoxicum, Echinacea (angustifolia), Hypothalamus Suis, Hepar Suis, Kidney (suis), Methylcobalamin, Gambogia, Graphites, Nux Vomica, Phytolacca Decandra, 7-oxo-dehydroepiandrosterone 3-acetate, Adenosinum Triphosphoricum Dinatrum, Insulinum (suis), Pancreas Suis, Sarcolacticum Acidum, Proteus (vulgaris)</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190822</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Deseret Biologicals, Inc.</LabelerName>
<SubstanceName>CYNANCHUM VINCETOXICUM ROOT; ECHINACEA ANGUSTIFOLIA WHOLE; SUS SCROFA HYPOTHALAMUS; PORK LIVER; PORK KIDNEY; METHYLCOBALAMIN; GAMBOGE; GRAPHITE; STRYCHNOS NUX-VOMICA SEED; PHYTOLACCA AMERICANA ROOT; 7-OXODEHYDROEPIANDROSTERONE 3-ACETATE; ADENOSINE TRIPHOSPHATE DISODIUM; INSULIN PORK; SUS SCROFA PANCREAS; LACTIC ACID, L-; PROTEUS VULGARIS</SubstanceName>
<StrengthNumber>6; 6; 6; 8; 8; 8; 12; 12; 12; 12; 30; 30; 30; 30; 30; 30</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190822</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> For the temporary relief of symptoms including. weight support increased appetite stress support fat metabolism support. These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51662-1531-1</NDCCode>
<PackageDescription>1 SYRINGE, GLASS in 1 CARTON (51662-1531-1) / 10 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>51662-1531-01</NDC11Code>
<ProductNDC>51662-1531</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210425</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209359</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Hypotension associated with Septic Shock. Epinephrine Injection USP, 1 mg/10 mL (0.1 mg/mL) is indicated to increase mean arterial blood pressure in adult patients with hypotension associated with septic shock.</IndicationAndUsage>
<Description>Epinephrine Injection USP, 1 mg/10 mL (0.1 mg/mL) is supplied as a sterile aqueous solution with a pH range of 2.3–3.5, that is clear, colorless, and nonpyrogenic. Each milliliter contains 0.1 mg epinephrine, 8.16 mg sodium chloride, 0.46 mg sodium metabisulfite, and 2.13 mg citric acid, anhydrous and 0.41 mg sodium citrate, dihydrate added as buffers. Additional citric acid and/or sodium citrate may be added for pH adjustment. The solution contains no preservatives. This sterile solution is to be administered after dilution by the intravenous route. Epinephrine is a sympathomimetic catecholamine (adrenergic agent) designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, crystalline powder. It has the following structural formula. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
</NDC>
<NDC>
<NDCCode>54868-1531-1</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (54868-1531-1) > 7.5 g in 1 TUBE</PackageDescription>
<NDC11Code>54868-1531-01</NDC11Code>
<ProductNDC>54868-1531</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cortisporin</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate, Polymyxin B Sulfate And Hydrocortisone Acetate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19940719</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050218</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>NEOMYCIN SULFATE; POLYMYXIN B SULFATE; HYDROCORTISONE ACETATE</SubstanceName>
<StrengthNumber>3.5; 10000; 5</StrengthNumber>
<StrengthUnit>mg/g; U/g; mg/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient],Polymyxin-class Antibacterial [EPC],Polymyxins [Chemical/Ingredient],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the treatment of corticosteroid-responsive dermatoses with secondary infection. It has not been demonstrated that this steroid-antibiotic combination provides greater benefit than the steroid component alone after 7 days of treatment (see WARNINGS).</IndicationAndUsage>
<Description>CORTISPORIN Cream (neomycin and polymyxin B sulfates and hydrocortisone acetate cream, USP) is a topical antibacterial cream. Each gram contains: neomycin sulfate equivalent to 3.5 mg neomycin base, polymyxin B sulfate equivalent to 10,000 polymyxin B units, and hydrocortisone acetate 5 mg (0.5%). The inactive ingredients are liquid petrolatum, white petrolatum, propylene glycol, polyoxyethylene polyoxypropylene compound, emulsifying wax, purified water, and 0.25% methylparaben added as a preservative. Sodium hydroxide or sulfuric acid may be added to adjust pH. Neomycin sulfate is the sulfate salt of neomycin B and C, which are produced by the growth of Streptomyces fradiae Waksman (Fam. Streptomycetaceae). It has a potency equivalent of not less than 600µg of neomycin standard per mg, calculated on an anhydrous basis. The structural formulae are. Polymyxin B sulfate is the sulfate salt of polymyxin B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on an anhydrous basis. The structural formulae are. Hydrocortisone acetate is the acetate ester of hydrocortisone, an anti-inflammatory hormone. Its chemical name is 21-(acetyloxy)- 11β,17-dihydroxypregn-4-ene-3,20-dione. Its structural formula is. The base is a smooth vanishing cream with a pH of approximately 5.0.</Description>
</NDC>
<NDC>
<NDCCode>67046-0003-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0003-3) </PackageDescription>
<NDC11Code>67046-0003-03</NDC11Code>
<ProductNDC>67046-0003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67046-0007-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0007-3) </PackageDescription>
<NDC11Code>67046-0007-03</NDC11Code>
<ProductNDC>67046-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260505</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203346</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alprazolam tablets are indicated for the: : 1 acute treatment of generalized anxiety disorder (GAD) in adults., 2 treatment of panic disorder (PD), with or without agoraphobia in adults.</IndicationAndUsage>
<Description>Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The structural formula is. Alprazolam USP is a white to off-white, crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam tablet USP, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, or 2 mg of alprazolam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium 85% with sodium benzoate 15%, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition, the 0.5 mg tablet contains FD&C Yellow # 6 aluminum lake and the 1 mg tablet contains FD&C Blue No. 2 lake.</Description>
</NDC>
<NDC>
<NDCCode>67046-0015-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0015-3) </PackageDescription>
<NDC11Code>67046-0015-03</NDC11Code>
<ProductNDC>67046-0015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260424</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065256</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>875</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260424</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. .</IndicationAndUsage>
<Description>Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0038-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0038-3) </PackageDescription>
<NDC11Code>67046-0038-03</NDC11Code>
<ProductNDC>67046-0038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201504</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quetiapine is an atypical antipsychotic indicated for the treatment of. · Schizophrenia ( 1.1). · Bipolar I disorder manic episodes ( 1.2). · Bipolar disorder, depressive episodes ( 1.2).</IndicationAndUsage>
<Description>Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f] [1,4]thiazepin-11-yl-1-piperazinyl) ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets, USP is supplied for oral administration as 25 mg (round peach), 50 mg (round, white), 100 mg (round yellow), 150 mg (round, off white to light yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic dicalcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg, 150 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 150 mg tablet contains 172.70 mg of quetiapine fumarate USP equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.27 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.40 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.54 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine.</Description>
</NDC>
<NDC>
<NDCCode>67046-0040-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0040-3) </PackageDescription>
<NDC11Code>67046-0040-03</NDC11Code>
<ProductNDC>67046-0040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040715</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
<Description>Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>67046-0041-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0041-3) </PackageDescription>
<NDC11Code>67046-0041-03</NDC11Code>
<ProductNDC>67046-0041</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260424</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040715</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260424</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
<Description>Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>67046-0053-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0053-3) </PackageDescription>
<NDC11Code>67046-0053-03</NDC11Code>
<ProductNDC>67046-0053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol</ProprietaryName>
<NonProprietaryName>Haloperidol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071173</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>HALOPERIDOL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
<Description>Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. C21H23ClFNO2375.87. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&C Red No. 40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>67046-0057-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0057-3) </PackageDescription>
<NDC11Code>67046-0057-03</NDC11Code>
<ProductNDC>67046-0057</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meloxicam</ProprietaryName>
<NonProprietaryName>Meloxicam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MELOXICAM</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meloxicam Tablets are non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥ 60 kg ( 1.3) .</IndicationAndUsage>
<Description>Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each yellow meloxicam tablet contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula. Meloxicam, USP is a pale yellow powder, practically insoluble in water, slightly soluble in acetone, soluble in dimethylformamide, very slightly soluble in ethanol (96 %) and in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Each meloxicam tablet, USP intended for oral administration contains 7.5 mg or 15 mg of meloxicam. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium citrate dihydrate.</Description>
</NDC>
<NDC>
<NDCCode>67046-0059-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-0059-3) </PackageDescription>
<NDC11Code>67046-0059-03</NDC11Code>
<ProductNDC>67046-0059</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260622</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>32.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1. Sedative 2. Anticonvulsant - For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5- phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula:. C 12H 12N 2O 3 M.W. = 232.24 Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg, or 97.2 mg of phenobarbital, USP. Inactive ingredients include:colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>67046-0060-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0060-3) </PackageDescription>
<NDC11Code>67046-0060-03</NDC11Code>
<ProductNDC>67046-0060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naltrexone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naltrexone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260527</StartMarketingDate>
<EndMarketingDate>20271130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075274</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>NALTREXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20260527</StartMarketingDatePackage>
<EndMarketingDatePackage>20271130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naltrexone Hydrochloride Tablets USP are indicated in the treatment of alcohol dependence and for the blockade of the effects of exogenously administered opioids. Naltrexone Hydrochloride Tablets USP have not been shown to provide any therapeutic benefit except as part of an appropriate plan of management for the addictions.</IndicationAndUsage>
<Description>Naltrexone hydrochloride, an opioid antagonist, are a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5a)-. The structural formula is as follows. Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone Hydrochloride Tablets USP are available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride. Naltrexone Hydrochloride Tablets USP also contain: carnauba wax powder, colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0068-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0068-3) </PackageDescription>
<NDC11Code>67046-0068-03</NDC11Code>
<ProductNDC>67046-0068</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076921</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Mirtazapine tablets, USP contain mirtazapine USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino [2,1-a] pyrido [2,3-c][2] benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture:. Mirtazapine is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine USP, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine USP. Each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black, and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>67046-0072-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0072-3) </PackageDescription>
<NDC11Code>67046-0072-03</NDC11Code>
<ProductNDC>67046-0072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202862</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine is an atypical antipsychotic indicated. As oral formulation for the:. · Treatment of schizophrenia. ( 1.1). · Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. ( 14.1). · Adolescents (ages 13-17): Efficacy was established in one 6-week trial in patients with schizophrenia ( 14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.1). · Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. ( 1.2). · Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. ( 14.2). · Adolescents (ages 13-17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder ( 14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. ( 1.2). · Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. ( 1.3). · Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. ( 1.2). · Efficacy was established in two 6-week clinical trials in adults ( 14.2). Maintenance efficacy has not been systematically evaluated. As Olanzapine and Fluoxetine in Combination for the: Treatment of depressive episodes associated with bipolar I disorder. ( 1.5) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax. Treatment of treatment resistant depression. ( 1.6) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.</IndicationAndUsage>
<Description>Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg).</Description>
</NDC>
<NDC>
<NDCCode>67046-0113-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-0113-3) </PackageDescription>
<NDC11Code>67046-0113-03</NDC11Code>
<ProductNDC>67046-0113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078216</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>Citalopram tablets, USP contain citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide, USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram, USP 10 mg tablets are film-coated, round shaped tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, oval shaped, scored tablets containing citalopram hydrobromide, in strengths equivalent to 20 mg or 40 mg citalopram base. The tablets also contain the following inactive ingredients: copovidone, corn starch, croscarmellose sodium, ferric oxide red, ferric oxide yellow, glycerin, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-0127-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (67046-0127-3) </PackageDescription>
<NDC11Code>67046-0127-03</NDC11Code>
<ProductNDC>67046-0127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064076</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat.</IndicationAndUsage>
<Description>Amoxicillin is a semisynthetic antibacterial, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[(R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4- thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Amoxicillin Capsules, USP. Each amoxicillin capsule, with yellow opaque cap and body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The 250 mg capsule is imprinted AMOX 250 on one side and GG 848 on the other side; the 500 mg capsule is imprinted AMOX 500 on one side and GG 849 on the other side. Inactive ingredients: Capsule shells - yellow ferric oxide, titanium dioxide, gelatin, black ferric oxide, shellac, propylene glycol, potassium hydroxide and ammonium hydroxide; Capsule contents - cellulose microcrystalline and magnesium stearate. Meets USP Dissolution Test 2. Amoxicillin Tablets, USP. Each film coated tablet contains 500 mg or 875 mg of amoxicillin as the trihydrate. The tablets are oval-shaped and white to yellowish. The 500 mg tablet is unscored, embossed GG-961 on one side and 500 on the other side. The 875 mg tablet is scored and embossed GG-962 on one side and 875 on the other side. In addition each amoxicillin tablet contains these inactive ingredients in each 500 mg or 875 mg tablet: colloidal silicon dioxide, crospovidone, ethylcellulose aqueous dispersion, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, triethyl citrate, and titanium dioxide. Amoxicillin for Oral Suspension, USP. Each 5 mL of reconstituted suspension contains 125 mg, 200 mg, 250 mg or 400 mg amoxicillin as the trihydrate. Each 5 mL of the 125 mg, 200 mg, 250 mg, and 400 mg reconstituted suspension contains 0.30 mEq (6.95 mg) of sodium. Amoxicillin trihydrate for oral suspension 125 mg/5 mL, 200 mg/5 mL, 250 mg/5 mL and 400 mg/5 mL are fruity flavored pink suspensions. Inactive ingredients: anhydrous citric acid, colloidal silicon dioxide, flavorings: raspberry, strawberry, refrachessement, FD&C Red 40, sodium benzoate, sodium citrate, sucrose, and xantham gum.</Description>
</NDC>
<NDC>
<NDCCode>67046-0135-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (67046-0135-3) </PackageDescription>
<NDC11Code>67046-0135-03</NDC11Code>
<ProductNDC>67046-0135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062396</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline Hyclate Capsules, USP is an antibacterial drug synthetically derived from oxytetracycline. The structural formula of doxycycline hyclate is. with a molecular formula of (C 22H 24N 2O 8HCL) 2C 2H 6OH 2O and a molecular weight of 1025.88. The chemical designation for doxycycline is 2-Naphthacenecarboxamide, 4-(dimethylamino)-1, 4, 4a, 5, 5a, 6, -11, 12a-octahydro-3,5,10, 12, 12a-pentahydroxy-6-methyl-1, 11-dioxo-monohydrochloride, compound with ethanol(2:1), monohydrate, [4s-(4α, 4aα, 5α, 5aα, 6α, 12aα)]. Doxycycline is a yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. The 50 mg and 100 mg capsule shells contain: gelatin, FD&C Blue #1 and titanium dioxide. The printing ink may contain: Shellac Glaze, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, SD-45 Alcohol, FD&C Blue #2, FD&C Red #40, FD&C Blue #1, D&C Yellow #10.</Description>
</NDC>
</NDCList>