{
"NDC": [
{
"NDCCode": "67046-451-20",
"PackageDescription": "20 TABLET in 1 BLISTER PACK (67046-451-20)",
"NDC11Code": "67046-0451-20",
"ProductNDC": "67046-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075636",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2."
},
{
"NDCCode": "42494-451-20",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (42494-451-20) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "42494-0451-20",
"ProductNDC": "42494-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210729",
"LabelerName": "Cameron Pharmaceuticals",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240115",
"EndMarketingDatePackage": "20261130",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride Capsules are indicated for the treatment of C. difficile-associated diarrhea. Vancomycin Hydrochloride Capsules are also used for the treatment of enterocolitis caused by Staphylococcus aureus(including methicillin-resistant strains) in adult and pediatric patients less than 18 years of age.",
"Description": "Vancomycin Hydrochloride Capsules USP for oral administration contain chromatographically purified vancomycin hydrochloride, a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis(formerly Nocardia orientalis), which has the chemical formula C 66H 75Cl 2N 9O 24∙HCl. The molecular weight of vancomycin hydrochloride is 1485.73; 500 mg of the base is equivalent to 0.34 mmol. The capsules contain 125 mg vancomycin (equivalent to 128 mg vancomycin hydrochloride). These capsules also contain polyethylene glycol 6000, FD&C Yellow No. 5, titanium dioxide, FD&C Blue No. 1, sodium lauryl sulfate and gelatin. The capsules contain 250 mg vancomycin (equivalent to 256 mg vancomycin hydrochloride). These capsules also contain polyethylene glycol 6000, yellow iron oxide, titanium dioxide, FD&C Blue No. 1, sodium lauryl sulfate, gelatin. Both 125 mg and 250 mg capsules are imprinted with ink which may contain titanium dioxide, carnauba wax, white shellac, glyceryl monooleate. Vancomycin hydrochloride has the structural formula."
},
{
"NDCCode": "46708-451-20",
"PackageDescription": "20 TABLET, COATED in 1 BOTTLE (46708-451-20) ",
"NDC11Code": "46708-0451-20",
"ProductNDC": "46708-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151013",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200891",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151013",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride is indiacted for the treatment of moderate to severe dementia of the Alzheimer's type.",
"Description": "Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine HCl occurs as a fine white to off-white powder and is soluble in methanol and sparingly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, macrogol/polyethylene glycol 400, FD&C yellow #6 aluminum lake and FD&C blue #2 aluminum lake (5 mg tablets), and hypromellose, titanium dioxide, macrogol/polyethylene glycol 400 and iron oxide black (10 mg tablets)."
},
{
"NDCCode": "50563-452-01",
"PackageDescription": "1 KIT in 1 KIT (50563-452-01) * 20 APPLICATOR in 1 PACKET (50563-451-01) > 6 mL in 1 APPLICATOR * 20 APPLICATOR in 1 PACKET (50563-450-01) > 6 mL in 1 APPLICATOR * 20 APPLICATOR in 1 PACKET (50563-449-01) > 6 mL in 1 APPLICATOR",
"NDC11Code": "50563-0452-01",
"ProductNDC": "50563-452",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicole Miller New York Antibacterial Hand Wipes Coconut Vanilla Warm Sugar Honey Almond 3 Pack",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20210702",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "ENCHANTE ACCESSORIES INC.",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210702",
"SamplePackage": "N"
},
{
"NDCCode": "51079-451-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-451-20) > 1 TABLET in 1 BLISTER PACK (51079-451-01) ",
"NDC11Code": "51079-0451-20",
"ProductNDC": "51079-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070402",
"EndMarketingDate": "20191130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076418",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20070402",
"EndMarketingDatePackage": "20191130",
"SamplePackage": "N"
},
{
"NDCCode": "55289-451-20",
"PackageDescription": "20 CAPSULE in 1 BOTTLE, PLASTIC (55289-451-20) ",
"NDC11Code": "55289-0451-20",
"ProductNDC": "55289-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celebrex",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19981002",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020998",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20110401",
"SamplePackage": "N"
},
{
"NDCCode": "55700-451-20",
"PackageDescription": "20 TABLET in 1 BOTTLE (55700-451-20) ",
"NDC11Code": "55700-0451-20",
"ProductNDC": "55700-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carisoprodol",
"NonProprietaryName": "Carisoprodol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040823",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "CARISOPRODOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20161104",
"SamplePackage": "N"
},
{
"NDCCode": "83270-451-05",
"PackageDescription": "20 CAPSULE in 1 CARTON (83270-451-05) ",
"NDC11Code": "83270-0451-05",
"ProductNDC": "83270-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vepesid",
"NonProprietaryName": "Etoposide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019557",
"LabelerName": "Onesource Specialty Pharma Limited",
"SubstanceName": "ETOPOSIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260529",
"SamplePackage": "N",
"IndicationAndUsage": "VePesid (etoposide) is indicated in the management of: Small Cell Lung Cancer—Etoposide capsules in combination with other approved chemotherapeutic agents as first line treatment in patients with small cell lung cancer.",
"Description": "VePesid ®(etoposide, USP) (also commonly known as VP-16) is a semisynthetic derivative of podophyllotoxin used in the treatment of certain neoplastic diseases. It is 4’- demethylepipodophyllotoxin 9-[4,6-O-(R)-ethylidene-β-D-glucopyranoside]. It is very soluble in methanol and chloroform, slightly soluble in ethanol, and sparingly soluble in water and ether. It is made more miscible with water by means of organic solvents. It has a molecular weight of 588.56 and a molecular formula of C 29H 32O 13. VePesid is administered orally. VePesid is available as 50 mg pink capsules. Each liquid- filled, soft gelatin capsule contains 50 mg of etoposide, USP in a vehicle consisting of citric acid anhydrous, polyethylene glycol 400, glycerol anhydrous, purified water, gelatin, glycerol anhydrous, sorbitol liquid partially dehydrated, titanium dioxide, red iron oxide, and Glycerol 85%. The capsules are printed with black edible ink, containing isopropyl alcohol, purified water, hypromellose, propylene glycol, FD&C red #40, FD& C blue #1. The structural formula is."
},
{
"NDCCode": "67046-451-07",
"PackageDescription": "7 TABLET in 1 BLISTER PACK (67046-451-07)",
"NDC11Code": "67046-0451-07",
"ProductNDC": "67046-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075636",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2."
},
{
"NDCCode": "67046-451-14",
"PackageDescription": "14 TABLET in 1 BLISTER PACK (67046-451-14)",
"NDC11Code": "67046-0451-14",
"ProductNDC": "67046-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075636",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2."
},
{
"NDCCode": "67046-451-15",
"PackageDescription": "15 TABLET in 1 BLISTER PACK (67046-451-15)",
"NDC11Code": "67046-0451-15",
"ProductNDC": "67046-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075636",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2."
},
{
"NDCCode": "67046-451-21",
"PackageDescription": "21 TABLET in 1 BLISTER PACK (67046-451-21)",
"NDC11Code": "67046-0451-21",
"ProductNDC": "67046-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075636",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2."
},
{
"NDCCode": "67046-451-28",
"PackageDescription": "28 TABLET in 1 BLISTER PACK (67046-451-28)",
"NDC11Code": "67046-0451-28",
"ProductNDC": "67046-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075636",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2."
},
{
"NDCCode": "67046-451-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-451-30)",
"NDC11Code": "67046-0451-30",
"ProductNDC": "67046-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075636",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2."
},
{
"NDCCode": "67046-451-60",
"PackageDescription": "60 TABLET in 1 BLISTER PACK (67046-451-60)",
"NDC11Code": "67046-0451-60",
"ProductNDC": "67046-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075636",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2."
},
{
"NDCCode": "67046-082-20",
"PackageDescription": "20 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (67046-082-20)",
"NDC11Code": "67046-0082-20",
"ProductNDC": "67046-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077284",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (XL) is an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD) and prevention of seasonal affective disorder (SAD). Periodically reevaluate long-term usefulness for the individual patient. ( 1).",
"Description": "Bupropion Hydrochloride Extended-Release Tablets USP (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: dehydrated alcohol, ethylcellulose, hydrochloric acid, hydroxypropylcellulose, methacrylic acid copolymer, povidone, silicon dioxide, hydrogenated vegetable oil and ethyl alcohol. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test 8."
},
{
"NDCCode": "67046-083-20",
"PackageDescription": "20 CAPSULE in 1 BLISTER PACK (67046-083-20)",
"NDC11Code": "67046-0083-20",
"ProductNDC": "67046-083",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Hydrochloride",
"NonProprietaryName": "Clindamycin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170920",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065061",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CLINDAMYCIN HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS],Neuromuscular Blockade [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Clindamycin hydrochloride capsules, USP are indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin hydrochloride capsules, USP are also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin hydrochloride capsules, USP are the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules, USP and other antibacterial drugs, clindamycin hydrochloride capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride, USP equivalent to 150 mg or 300 mg of clindamycin. Inactive ingredients: 150 mg - black iron oxide, corn starch, D&C Yellow #10, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide; 300 mg - black iron oxide, corn starch, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide. The structural formula is represented below. C 18H 33ClN 2O 5SHCl M.W. 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6, 7, 8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo-α-D- galacto-octopyranoside monohydrochloride."
},
{
"NDCCode": "67046-084-20",
"PackageDescription": "20 CAPSULE in 1 BLISTER PACK (67046-084-20)",
"NDC11Code": "67046-0084-20",
"ProductNDC": "67046-084",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Hydrochloride",
"NonProprietaryName": "Clindamycin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA063083",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CLINDAMYCIN HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride and other antibacterial drugs, clindamycin hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride. The structural formula is represented below. Clindamycin Hydrochloride Capsules USP (equivalent to 150 mg or 300 mg clindamycin) contain the following inactive ingredients: anhydrous lactose, magnesium stearate, starch (corn) and talc. The capsule shells contain: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, silicon dioxide, sodium lauryl sulfate, and titanium dioxide. The 150 mg capsule shell also contains black iron oxide and yellow iron oxide."
},
{
"NDCCode": "67046-085-20",
"PackageDescription": "20 CAPSULE, GELATIN COATED in 1 BLISTER PACK (67046-085-20)",
"NDC11Code": "67046-0085-20",
"ProductNDC": "67046-085",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Hydrochloride",
"NonProprietaryName": "Clindamycin Hydrochloride",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065194",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CLINDAMYCIN HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin the physician should consider the nature of the infection and the suitability of less toxic alternatives (eg, erythromycin). : 1 Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis and postsurgical vaginal cuff infection., 2 Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections., 3 Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections., 4 Pneumococci: Serious respiratory tract infections.",
"Description": "Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP, intended for oral administration, contain clindamycin hydrochloride equivalent to 150 mg or 300 mg of clindamycin. In addition, they also contain the following inactive ingredients: D&C yellow # 10, FD&C blue #1, gelatin, lactose monohydrate, magnesium stearate, pregelatinized starch and titanium dioxide. The structural formula is represented below. Molecular Formula: C18H33CIN2O5SHCl. Molecular Weight: 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4- propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride."
},
{
"NDCCode": "67046-094-20",
"PackageDescription": "20 TABLET in 1 BLISTER PACK (67046-094-20)",
"NDC11Code": "67046-0094-20",
"ProductNDC": "67046-094",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonidine Hydrochloride",
"NonProprietaryName": "Clonidine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070974",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CLONIDINE HYDROCHLORIDE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Clonidine hydrochloride tablets, USP are indicated in the treatment of hypertension. Clonidine hydrochloride tablets may be employed alone or concomitantly with other antihypertensive agents.",
"Description": "Clonidine hydrochloride, USP is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg, and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. The following inactive ingredients are contained in these products: corn starch, D&C yellow #10 Aluminum Lake, FD&C yellow #6 Aluminum Lake (Sunset Yellow Lake), lactose monohydrate, magnesium stearate, and sodium starch glycolate. Clonidine hydrochloride, USP is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. Clonidine hydrochloride, USP is an odorless, bitter, white, crystalline substance soluble in water and alcohol."
},
{
"NDCCode": "67046-099-20",
"PackageDescription": "20 TABLET, FILM COATED in 1 BLISTER PACK (67046-099-20)",
"NDC11Code": "67046-0099-20",
"ProductNDC": "67046-099",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clopidogrel Bisulfate",
"NonProprietaryName": "Clopidogrel Bisulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076273",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CLOPIDOGREL BISULFATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE],P2Y12 Platelet Inhibitor [EPC],P2Y12 Receptor Antagonists [MoA],Cytochrome P450 2C8 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"Description": "Clopidogrel bisulfate USP is a thienopyridine class inhibitor of P2Y 12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C 16H 16Cl NO 2SH 2SO 4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as white, film coated, round, biconvex tablets debossed with “R” on one side and “196” on other side. Each tablet contains 97.875 mg of clopidogrel bisulfate which is the molar equivalent to 75 mg of clopidogrel base. Each tablet contains colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol and microcrystalline cellulose as inactive ingredients. The film coating contains hypromellose 2910-5cP, polyethylene glycol 400 and titanium dioxide."
},
{
"NDCCode": "67046-105-20",
"PackageDescription": "20 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-105-20)",
"NDC11Code": "67046-0105-20",
"ProductNDC": "67046-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Divalproex Sodium",
"NonProprietaryName": "Divalproex Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078597",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "DIVALPROEX SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Divalproex sodium is an anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder ( 1.1) , 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures ( 1.2) , 3 Prophylaxis of migraine headaches ( 1.3) .",
"Description": "Divalproex sodium is a stable coordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure: Divalproex sodium occurs as a white powder with a characteristic odor. Divalproex sodium delayed-release tablets are for oral administration. Divalproex sodium delayed-release tablets, USP are supplied in three dosage strengths containing divalproex sodium USP equivalent to 125 mg, 250 mg, or 500 mg of valproic acid. Inactive Ingredients. Divalproex sodium delayed-release tablets: colloidal silicon dioxide, corn starch, povidone, pregelatinized maize starch, hypromellose, titanium dioxide, triacetin, methacrylic acid copolymer type C, talc, triethyl citrate, colloidal anhydrous silica, sodium bicarbonate, and sodium lauryl sulfate. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol, and ammonium hydroxide. In addition, individual tablets contain. 125 mg tablets: FD&C Red #40, and FD&C Blue #2. 250 mg tablets: FD&C Yellow #6, and iron oxide yellow. 500 mg tablets: D&C Red #30, FD&C Blue #2, and iron oxide red."
},
{
"NDCCode": "67046-117-20",
"PackageDescription": "20 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-20)",
"NDC11Code": "67046-0117-20",
"ProductNDC": "67046-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078048",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose."
},
{
"NDCCode": "67046-118-20",
"PackageDescription": "20 TABLET in 1 BLISTER PACK (67046-118-20)",
"NDC11Code": "67046-0118-20",
"ProductNDC": "67046-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dicyclomine Hydrochloride",
"NonProprietaryName": "Dicyclomine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085223",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "DICYCLOMINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.",
"Description": "Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage forms: : 1 Dicyclomine hydrochloride capsules for oral use contain 10 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 10 mg capsules also contain inactive ingredients: sodium lauryl sulfate, D&C Red #28, FD&C Blue #1, FD&C Red #40, gelatin, magnesium stearate, pregelatinized starch, silicon dioxide. , 2 Dicyclomine hydrochloride tablets for oral use contain 20 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 20 mg tablets also contain inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue #1, hypromellose, lactose monohydrate, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "67046-123-20",
"PackageDescription": "20 CAPSULE in 1 BLISTER PACK (67046-123-20)",
"NDC11Code": "67046-0123-20",
"ProductNDC": "67046-123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dicyclomine Hydrochloride",
"NonProprietaryName": "Dicyclomine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085082",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "DICYCLOMINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.",
"Description": "Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage forms: : 1 Dicyclomine hydrochloride capsules for oral use contain 10 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 10 mg capsules also contain inactive ingredients: sodium lauryl sulfate, D&C Red #28, FD&C Blue #1, FD&C Red #40, gelatin, magnesium stearate, pregelatinized starch, silicon dioxide. , 2 Dicyclomine hydrochloride tablets for oral use contain 20 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 20 mg tablets also contain inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue #1, hypromellose, lactose monohydrate, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "67046-130-20",
"PackageDescription": "20 CAPSULE in 1 BLISTER PACK (67046-130-20)",
"NDC11Code": "67046-0130-20",
"ProductNDC": "67046-130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062676",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline hyclate is an antibacterial drug synthetically derived from oxytetracycline, and is available as doxycycline hyclate (doxycycline hydrochloride hemiethanolate hemihydrate) capsules and tablets for oral administration. The chemical designation of this light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Doxycycline hyclate has the following structural formula. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg doxycycline (anhydrous). Inactive ingredients for capsules are: anhydrous lactose, croscarmellose sodium, D&C Red #28, FD&C Blue #1, gelatin, magnesium stearate, microcrystalline cellulose, and titanium dioxide. Each tablet for oral administration contains doxycycline hyclate equivalent to 100 mg doxycycline. Inactive ingredients for tablets are: anhydrous lactose, carnauba wax, croscarmellose sodium, D&C Yellow #10 aluminum lake, FD&C Red #40 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, and titanium dioxide."
},
{
"NDCCode": "67046-135-20",
"PackageDescription": "20 CAPSULE in 1 BLISTER PACK (67046-135-20)",
"NDC11Code": "67046-0135-20",
"ProductNDC": "67046-135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100310",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062396",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline hyclate is a broad-spectrum antibiotic synthetically derived from oxytetracycline. The structural formula is as follows. with a molecular formula of C22H24N2O8H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. Doxycycline is a light yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. 50 mg gelatin capsule shell contains: FD&C Blue #1, silicon dioxide, sodium lauryl sulfate and titanium dioxide. 100 mg gelatin capsule shell contains: FD&C Blue #1, silicon dioxide, sodium lauryl sulfate and titanium dioxide. The printing ink contains: D&C Yellow #10, FD&C Blue #1, FD&C Blue #2, FD&C Red #40, n-Butyl Alcohol, Pharmaceutical Glaze, Propylene Glycol, SDA-3A Alcohol and Synthetic Black Iron Oxide."
},
{
"NDCCode": "67046-137-20",
"PackageDescription": "20 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-137-20)",
"NDC11Code": "67046-0137-20",
"ProductNDC": "67046-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Divalproex Sodium",
"NonProprietaryName": "Divalproex Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170925",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077100",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "DIVALPROEX SODIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Divalproex sodium delayed-release tablets are anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder ( 1.1) , 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures ( 1.2) , 3 Prophylaxis of migraine headaches ( 1.3) .",
"Description": "Divalproex sodium is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure. Divalproex sodium, USP is a white, crystalline powder and almost odorless. It is very soluble in chloroform, freely soluble in methanol and in ethyl ether; soluble in acetone and practically insoluble in acetonitrile. Each divalproex sodium delayed-release tablets, intended for oral administration contains divalproex sodium equivalent to 125 mg or 250 mg or 500 mg of valproic acid. In addition each tablet also contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, starch (botanical source: maize), talc and triethyl citrate. Each tablet is imprinted with black pharmaceutical ink which contains following inactive ingredients: ammonium hydroxide, ferrosoferric oxide, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac."
},
{
"NDCCode": "67046-138-20",
"PackageDescription": "20 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-138-20)",
"NDC11Code": "67046-0138-20",
"ProductNDC": "67046-138",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Divalproex Sodium",
"NonProprietaryName": "Divalproex Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170925",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077100",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "DIVALPROEX SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Divalproex sodium delayed-release tablets are anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder ( 1.1) , 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures ( 1.2) , 3 Prophylaxis of migraine headaches ( 1.3) .",
"Description": "Divalproex sodium is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure. Divalproex sodium, USP is a white, crystalline powder and almost odorless. It is very soluble in chloroform, freely soluble in methanol and in ethyl ether; soluble in acetone and practically insoluble in acetonitrile. Each divalproex sodium delayed-release tablets, intended for oral administration contains divalproex sodium equivalent to 125 mg or 250 mg or 500 mg of valproic acid. In addition each tablet also contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, starch (botanical source: maize), talc and triethyl citrate. Each tablet is imprinted with black pharmaceutical ink which contains following inactive ingredients: ammonium hydroxide, ferrosoferric oxide, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac."
},
{
"NDCCode": "67046-141-20",
"PackageDescription": "20 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-141-20)",
"NDC11Code": "67046-0141-20",
"ProductNDC": "67046-141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Divalproex Sodium",
"NonProprietaryName": "Divalproex Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090554",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "DIVALPROEX SODIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Divalproex sodium is an anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder (1.1), 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures (1.2), 3 Prophylaxis of migraine headaches (1.3).",
"Description": "Divalproex sodium is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure:. Divalproex sodium USP occurs as a white crystalline powder with a characteristic odor. Divalproex sodium delayed-release tablets, USP are for oral administration. Divalproex sodium delayed-release tablets, USP are supplied in three dosage strengths containing divalproex sodium USP equivalent to 125 mg, 250 mg, or 500 mg of valproic acid. Inactive Ingredients. Divalproex sodium delayed-release tablets, USP: silicon dioxide, microcrystalline cellulose, croscarmellose sodium, povidone (Kollidon 30), hydroxypropyl cellulose low substituted, talc, methylene chloride, methacrylic acid: ethyl acrylate copolymer (1:1), and diethyl phthalate. In addition, 125 mg tablets are coated with opadry clear 04K59023 and opadry II complete film coating system 86G540000 pink. Opadry clear 04K59023 contains hypromellose and triacetin, opadry II complete film coating system 86G540000 pink contains polyvinyl alcohol, talc, titanium dioxide, macrogol/PEG 3350, FD&C Red #40, lecithin (soya), and vanillin. 250 mg tablets are coated with opadry clear 04K59023 and opadry II 86G53866 orange. Opadry clear 04K59023 contains hypromellose and triacetin, opadry II 86G53866 orange contains polyvinyl alcohol, talc, titanium dioxide, macrogol/PEG 3350, lecithin (soya), vanillin, FD&C Yellow #6, and iron oxide yellow. 500 mg tablets are coated with opadry clear 04K59023 and opadry II 86G84795 pink. Opadry clear 04K59023 contains hypromellose and triacetin, opadry II 86G84795 pink contains polyvinyl alcohol, talc, titanium dioxide, macrogol/PEG 3350, lecithin (soya), FD&C Red #40, vanillin, and FD&C Blue #2. The tablets are printed with opacode black S-1-17823 containing shellac glaze in ethanol, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol, and ammonium hydroxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67046-451-20</NDCCode>
<PackageDescription>20 TABLET in 1 BLISTER PACK (67046-451-20)</PackageDescription>
<NDC11Code>67046-0451-20</NDC11Code>
<ProductNDC>67046-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075636</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>42494-451-20</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (42494-451-20) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>42494-0451-20</NDC11Code>
<ProductNDC>42494-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210729</ApplicationNumber>
<LabelerName>Cameron Pharmaceuticals</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240115</StartMarketingDatePackage>
<EndMarketingDatePackage>20261130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride Capsules are indicated for the treatment of C. difficile-associated diarrhea. Vancomycin Hydrochloride Capsules are also used for the treatment of enterocolitis caused by Staphylococcus aureus(including methicillin-resistant strains) in adult and pediatric patients less than 18 years of age.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride Capsules USP for oral administration contain chromatographically purified vancomycin hydrochloride, a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis(formerly Nocardia orientalis), which has the chemical formula C 66H 75Cl 2N 9O 24∙HCl. The molecular weight of vancomycin hydrochloride is 1485.73; 500 mg of the base is equivalent to 0.34 mmol. The capsules contain 125 mg vancomycin (equivalent to 128 mg vancomycin hydrochloride). These capsules also contain polyethylene glycol 6000, FD&C Yellow No. 5, titanium dioxide, FD&C Blue No. 1, sodium lauryl sulfate and gelatin. The capsules contain 250 mg vancomycin (equivalent to 256 mg vancomycin hydrochloride). These capsules also contain polyethylene glycol 6000, yellow iron oxide, titanium dioxide, FD&C Blue No. 1, sodium lauryl sulfate, gelatin. Both 125 mg and 250 mg capsules are imprinted with ink which may contain titanium dioxide, carnauba wax, white shellac, glyceryl monooleate. Vancomycin hydrochloride has the structural formula.</Description>
</NDC>
<NDC>
<NDCCode>46708-451-20</NDCCode>
<PackageDescription>20 TABLET, COATED in 1 BOTTLE (46708-451-20) </PackageDescription>
<NDC11Code>46708-0451-20</NDC11Code>
<ProductNDC>46708-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151013</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200891</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride is indiacted for the treatment of moderate to severe dementia of the Alzheimer's type.</IndicationAndUsage>
<Description>Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine HCl occurs as a fine white to off-white powder and is soluble in methanol and sparingly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, macrogol/polyethylene glycol 400, FD&C yellow #6 aluminum lake and FD&C blue #2 aluminum lake (5 mg tablets), and hypromellose, titanium dioxide, macrogol/polyethylene glycol 400 and iron oxide black (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>50563-452-01</NDCCode>
<PackageDescription>1 KIT in 1 KIT (50563-452-01) * 20 APPLICATOR in 1 PACKET (50563-451-01) > 6 mL in 1 APPLICATOR * 20 APPLICATOR in 1 PACKET (50563-450-01) > 6 mL in 1 APPLICATOR * 20 APPLICATOR in 1 PACKET (50563-449-01) > 6 mL in 1 APPLICATOR</PackageDescription>
<NDC11Code>50563-0452-01</NDC11Code>
<ProductNDC>50563-452</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicole Miller New York Antibacterial Hand Wipes Coconut Vanilla Warm Sugar Honey Almond 3 Pack</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20210702</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>ENCHANTE ACCESSORIES INC.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51079-451-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-451-20) > 1 TABLET in 1 BLISTER PACK (51079-451-01) </PackageDescription>
<NDC11Code>51079-0451-20</NDC11Code>
<ProductNDC>51079-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070402</StartMarketingDate>
<EndMarketingDate>20191130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076418</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20070402</StartMarketingDatePackage>
<EndMarketingDatePackage>20191130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55289-451-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE, PLASTIC (55289-451-20) </PackageDescription>
<NDC11Code>55289-0451-20</NDC11Code>
<ProductNDC>55289-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celebrex</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981002</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020998</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55700-451-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (55700-451-20) </PackageDescription>
<NDC11Code>55700-0451-20</NDC11Code>
<ProductNDC>55700-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carisoprodol</ProprietaryName>
<NonProprietaryName>Carisoprodol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040823</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>CARISOPRODOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>83270-451-05</NDCCode>
<PackageDescription>20 CAPSULE in 1 CARTON (83270-451-05) </PackageDescription>
<NDC11Code>83270-0451-05</NDC11Code>
<ProductNDC>83270-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vepesid</ProprietaryName>
<NonProprietaryName>Etoposide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019557</ApplicationNumber>
<LabelerName>Onesource Specialty Pharma Limited</LabelerName>
<SubstanceName>ETOPOSIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VePesid (etoposide) is indicated in the management of: Small Cell Lung Cancer—Etoposide capsules in combination with other approved chemotherapeutic agents as first line treatment in patients with small cell lung cancer.</IndicationAndUsage>
<Description>VePesid ®(etoposide, USP) (also commonly known as VP-16) is a semisynthetic derivative of podophyllotoxin used in the treatment of certain neoplastic diseases. It is 4’- demethylepipodophyllotoxin 9-[4,6-O-(R)-ethylidene-β-D-glucopyranoside]. It is very soluble in methanol and chloroform, slightly soluble in ethanol, and sparingly soluble in water and ether. It is made more miscible with water by means of organic solvents. It has a molecular weight of 588.56 and a molecular formula of C 29H 32O 13. VePesid is administered orally. VePesid is available as 50 mg pink capsules. Each liquid- filled, soft gelatin capsule contains 50 mg of etoposide, USP in a vehicle consisting of citric acid anhydrous, polyethylene glycol 400, glycerol anhydrous, purified water, gelatin, glycerol anhydrous, sorbitol liquid partially dehydrated, titanium dioxide, red iron oxide, and Glycerol 85%. The capsules are printed with black edible ink, containing isopropyl alcohol, purified water, hypromellose, propylene glycol, FD&C red #40, FD& C blue #1. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>67046-451-07</NDCCode>
<PackageDescription>7 TABLET in 1 BLISTER PACK (67046-451-07)</PackageDescription>
<NDC11Code>67046-0451-07</NDC11Code>
<ProductNDC>67046-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075636</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>67046-451-14</NDCCode>
<PackageDescription>14 TABLET in 1 BLISTER PACK (67046-451-14)</PackageDescription>
<NDC11Code>67046-0451-14</NDC11Code>
<ProductNDC>67046-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075636</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>67046-451-15</NDCCode>
<PackageDescription>15 TABLET in 1 BLISTER PACK (67046-451-15)</PackageDescription>
<NDC11Code>67046-0451-15</NDC11Code>
<ProductNDC>67046-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075636</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>67046-451-21</NDCCode>
<PackageDescription>21 TABLET in 1 BLISTER PACK (67046-451-21)</PackageDescription>
<NDC11Code>67046-0451-21</NDC11Code>
<ProductNDC>67046-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075636</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>67046-451-28</NDCCode>
<PackageDescription>28 TABLET in 1 BLISTER PACK (67046-451-28)</PackageDescription>
<NDC11Code>67046-0451-28</NDC11Code>
<ProductNDC>67046-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075636</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>67046-451-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-451-30)</PackageDescription>
<NDC11Code>67046-0451-30</NDC11Code>
<ProductNDC>67046-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075636</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>67046-451-60</NDCCode>
<PackageDescription>60 TABLET in 1 BLISTER PACK (67046-451-60)</PackageDescription>
<NDC11Code>67046-0451-60</NDC11Code>
<ProductNDC>67046-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075636</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding ß-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1 α( R*),3 α,7 ß,8 ß(2 S*,4 S*), 8a ß]]-1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 360 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets, USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and corn starch. Butylated hydroxyanisole (BHA) is added as a preservative. In addition the 10 mg tablets also contain red iron oxide and yellow iron oxide; the 20 mg tablets also contain FD&C blue No. 2; and the 40 mg tablets also contain D&C yellow No. 10 and FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>67046-082-20</NDCCode>
<PackageDescription>20 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (67046-082-20)</PackageDescription>
<NDC11Code>67046-0082-20</NDC11Code>
<ProductNDC>67046-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077284</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (XL) is an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD) and prevention of seasonal affective disorder (SAD). Periodically reevaluate long-term usefulness for the individual patient. ( 1).</IndicationAndUsage>
<Description>Bupropion Hydrochloride Extended-Release Tablets USP (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: dehydrated alcohol, ethylcellulose, hydrochloric acid, hydroxypropylcellulose, methacrylic acid copolymer, povidone, silicon dioxide, hydrogenated vegetable oil and ethyl alcohol. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test 8.</Description>
</NDC>
<NDC>
<NDCCode>67046-083-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BLISTER PACK (67046-083-20)</PackageDescription>
<NDC11Code>67046-0083-20</NDC11Code>
<ProductNDC>67046-083</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170920</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065061</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS],Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clindamycin hydrochloride capsules, USP are indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin hydrochloride capsules, USP are also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin hydrochloride capsules, USP are the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules, USP and other antibacterial drugs, clindamycin hydrochloride capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride, USP equivalent to 150 mg or 300 mg of clindamycin. Inactive ingredients: 150 mg - black iron oxide, corn starch, D&C Yellow #10, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide; 300 mg - black iron oxide, corn starch, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide. The structural formula is represented below. C 18H 33ClN 2O 5SHCl M.W. 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6, 7, 8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo-α-D- galacto-octopyranoside monohydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>67046-084-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BLISTER PACK (67046-084-20)</PackageDescription>
<NDC11Code>67046-0084-20</NDC11Code>
<ProductNDC>67046-084</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA063083</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride and other antibacterial drugs, clindamycin hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride. The structural formula is represented below. Clindamycin Hydrochloride Capsules USP (equivalent to 150 mg or 300 mg clindamycin) contain the following inactive ingredients: anhydrous lactose, magnesium stearate, starch (corn) and talc. The capsule shells contain: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, silicon dioxide, sodium lauryl sulfate, and titanium dioxide. The 150 mg capsule shell also contains black iron oxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-085-20</NDCCode>
<PackageDescription>20 CAPSULE, GELATIN COATED in 1 BLISTER PACK (67046-085-20)</PackageDescription>
<NDC11Code>67046-0085-20</NDC11Code>
<ProductNDC>67046-085</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065194</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin the physician should consider the nature of the infection and the suitability of less toxic alternatives (eg, erythromycin). : 1 Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis and postsurgical vaginal cuff infection., 2 Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections., 3 Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections., 4 Pneumococci: Serious respiratory tract infections.</IndicationAndUsage>
<Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP, intended for oral administration, contain clindamycin hydrochloride equivalent to 150 mg or 300 mg of clindamycin. In addition, they also contain the following inactive ingredients: D&C yellow # 10, FD&C blue #1, gelatin, lactose monohydrate, magnesium stearate, pregelatinized starch and titanium dioxide. The structural formula is represented below. Molecular Formula: C18H33CIN2O5SHCl. Molecular Weight: 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4- propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>67046-094-20</NDCCode>
<PackageDescription>20 TABLET in 1 BLISTER PACK (67046-094-20)</PackageDescription>
<NDC11Code>67046-0094-20</NDC11Code>
<ProductNDC>67046-094</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070974</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CLONIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clonidine hydrochloride tablets, USP are indicated in the treatment of hypertension. Clonidine hydrochloride tablets may be employed alone or concomitantly with other antihypertensive agents.</IndicationAndUsage>
<Description>Clonidine hydrochloride, USP is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg, and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. The following inactive ingredients are contained in these products: corn starch, D&C yellow #10 Aluminum Lake, FD&C yellow #6 Aluminum Lake (Sunset Yellow Lake), lactose monohydrate, magnesium stearate, and sodium starch glycolate. Clonidine hydrochloride, USP is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. Clonidine hydrochloride, USP is an odorless, bitter, white, crystalline substance soluble in water and alcohol.</Description>
</NDC>
<NDC>
<NDCCode>67046-099-20</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BLISTER PACK (67046-099-20)</PackageDescription>
<NDC11Code>67046-0099-20</NDC11Code>
<ProductNDC>67046-099</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clopidogrel Bisulfate</ProprietaryName>
<NonProprietaryName>Clopidogrel Bisulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076273</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CLOPIDOGREL BISULFATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE],P2Y12 Platelet Inhibitor [EPC],P2Y12 Receptor Antagonists [MoA],Cytochrome P450 2C8 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<Description>Clopidogrel bisulfate USP is a thienopyridine class inhibitor of P2Y 12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C 16H 16Cl NO 2SH 2SO 4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as white, film coated, round, biconvex tablets debossed with “R” on one side and “196” on other side. Each tablet contains 97.875 mg of clopidogrel bisulfate which is the molar equivalent to 75 mg of clopidogrel base. Each tablet contains colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol and microcrystalline cellulose as inactive ingredients. The film coating contains hypromellose 2910-5cP, polyethylene glycol 400 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-105-20</NDCCode>
<PackageDescription>20 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-105-20)</PackageDescription>
<NDC11Code>67046-0105-20</NDC11Code>
<ProductNDC>67046-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Divalproex Sodium</ProprietaryName>
<NonProprietaryName>Divalproex Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078597</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>DIVALPROEX SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Divalproex sodium is an anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder ( 1.1) , 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures ( 1.2) , 3 Prophylaxis of migraine headaches ( 1.3) .</IndicationAndUsage>
<Description>Divalproex sodium is a stable coordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure: Divalproex sodium occurs as a white powder with a characteristic odor. Divalproex sodium delayed-release tablets are for oral administration. Divalproex sodium delayed-release tablets, USP are supplied in three dosage strengths containing divalproex sodium USP equivalent to 125 mg, 250 mg, or 500 mg of valproic acid. Inactive Ingredients. Divalproex sodium delayed-release tablets: colloidal silicon dioxide, corn starch, povidone, pregelatinized maize starch, hypromellose, titanium dioxide, triacetin, methacrylic acid copolymer type C, talc, triethyl citrate, colloidal anhydrous silica, sodium bicarbonate, and sodium lauryl sulfate. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol, and ammonium hydroxide. In addition, individual tablets contain. 125 mg tablets: FD&C Red #40, and FD&C Blue #2. 250 mg tablets: FD&C Yellow #6, and iron oxide yellow. 500 mg tablets: D&C Red #30, FD&C Blue #2, and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>67046-117-20</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BLISTER PACK (67046-117-20)</PackageDescription>
<NDC11Code>67046-0117-20</NDC11Code>
<ProductNDC>67046-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078048</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain D&C yellow # 10 aluminum lake, FD&C yellow # 6 aluminum lake and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>67046-118-20</NDCCode>
<PackageDescription>20 TABLET in 1 BLISTER PACK (67046-118-20)</PackageDescription>
<NDC11Code>67046-0118-20</NDC11Code>
<ProductNDC>67046-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085223</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.</IndicationAndUsage>
<Description>Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage forms: : 1 Dicyclomine hydrochloride capsules for oral use contain 10 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 10 mg capsules also contain inactive ingredients: sodium lauryl sulfate, D&C Red #28, FD&C Blue #1, FD&C Red #40, gelatin, magnesium stearate, pregelatinized starch, silicon dioxide. , 2 Dicyclomine hydrochloride tablets for oral use contain 20 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 20 mg tablets also contain inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue #1, hypromellose, lactose monohydrate, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>67046-123-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BLISTER PACK (67046-123-20)</PackageDescription>
<NDC11Code>67046-0123-20</NDC11Code>
<ProductNDC>67046-123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085082</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.</IndicationAndUsage>
<Description>Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage forms: : 1 Dicyclomine hydrochloride capsules for oral use contain 10 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 10 mg capsules also contain inactive ingredients: sodium lauryl sulfate, D&C Red #28, FD&C Blue #1, FD&C Red #40, gelatin, magnesium stearate, pregelatinized starch, silicon dioxide. , 2 Dicyclomine hydrochloride tablets for oral use contain 20 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 20 mg tablets also contain inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue #1, hypromellose, lactose monohydrate, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>67046-130-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BLISTER PACK (67046-130-20)</PackageDescription>
<NDC11Code>67046-0130-20</NDC11Code>
<ProductNDC>67046-130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062676</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline hyclate is an antibacterial drug synthetically derived from oxytetracycline, and is available as doxycycline hyclate (doxycycline hydrochloride hemiethanolate hemihydrate) capsules and tablets for oral administration. The chemical designation of this light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Doxycycline hyclate has the following structural formula. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg doxycycline (anhydrous). Inactive ingredients for capsules are: anhydrous lactose, croscarmellose sodium, D&C Red #28, FD&C Blue #1, gelatin, magnesium stearate, microcrystalline cellulose, and titanium dioxide. Each tablet for oral administration contains doxycycline hyclate equivalent to 100 mg doxycycline. Inactive ingredients for tablets are: anhydrous lactose, carnauba wax, croscarmellose sodium, D&C Yellow #10 aluminum lake, FD&C Red #40 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-135-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BLISTER PACK (67046-135-20)</PackageDescription>
<NDC11Code>67046-0135-20</NDC11Code>
<ProductNDC>67046-135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100310</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062396</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline hyclate is a broad-spectrum antibiotic synthetically derived from oxytetracycline. The structural formula is as follows. with a molecular formula of C22H24N2O8H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. Doxycycline is a light yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. 50 mg gelatin capsule shell contains: FD&C Blue #1, silicon dioxide, sodium lauryl sulfate and titanium dioxide. 100 mg gelatin capsule shell contains: FD&C Blue #1, silicon dioxide, sodium lauryl sulfate and titanium dioxide. The printing ink contains: D&C Yellow #10, FD&C Blue #1, FD&C Blue #2, FD&C Red #40, n-Butyl Alcohol, Pharmaceutical Glaze, Propylene Glycol, SDA-3A Alcohol and Synthetic Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-137-20</NDCCode>
<PackageDescription>20 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-137-20)</PackageDescription>
<NDC11Code>67046-0137-20</NDC11Code>
<ProductNDC>67046-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Divalproex Sodium</ProprietaryName>
<NonProprietaryName>Divalproex Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170925</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077100</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>DIVALPROEX SODIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Divalproex sodium delayed-release tablets are anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder ( 1.1) , 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures ( 1.2) , 3 Prophylaxis of migraine headaches ( 1.3) .</IndicationAndUsage>
<Description>Divalproex sodium is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure. Divalproex sodium, USP is a white, crystalline powder and almost odorless. It is very soluble in chloroform, freely soluble in methanol and in ethyl ether; soluble in acetone and practically insoluble in acetonitrile. Each divalproex sodium delayed-release tablets, intended for oral administration contains divalproex sodium equivalent to 125 mg or 250 mg or 500 mg of valproic acid. In addition each tablet also contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, starch (botanical source: maize), talc and triethyl citrate. Each tablet is imprinted with black pharmaceutical ink which contains following inactive ingredients: ammonium hydroxide, ferrosoferric oxide, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>67046-138-20</NDCCode>
<PackageDescription>20 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-138-20)</PackageDescription>
<NDC11Code>67046-0138-20</NDC11Code>
<ProductNDC>67046-138</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Divalproex Sodium</ProprietaryName>
<NonProprietaryName>Divalproex Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170925</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077100</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>DIVALPROEX SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Divalproex sodium delayed-release tablets are anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder ( 1.1) , 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures ( 1.2) , 3 Prophylaxis of migraine headaches ( 1.3) .</IndicationAndUsage>
<Description>Divalproex sodium is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure. Divalproex sodium, USP is a white, crystalline powder and almost odorless. It is very soluble in chloroform, freely soluble in methanol and in ethyl ether; soluble in acetone and practically insoluble in acetonitrile. Each divalproex sodium delayed-release tablets, intended for oral administration contains divalproex sodium equivalent to 125 mg or 250 mg or 500 mg of valproic acid. In addition each tablet also contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, starch (botanical source: maize), talc and triethyl citrate. Each tablet is imprinted with black pharmaceutical ink which contains following inactive ingredients: ammonium hydroxide, ferrosoferric oxide, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>67046-141-20</NDCCode>
<PackageDescription>20 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-141-20)</PackageDescription>
<NDC11Code>67046-0141-20</NDC11Code>
<ProductNDC>67046-141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Divalproex Sodium</ProprietaryName>
<NonProprietaryName>Divalproex Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090554</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>DIVALPROEX SODIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Divalproex sodium is an anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder (1.1), 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures (1.2), 3 Prophylaxis of migraine headaches (1.3).</IndicationAndUsage>
<Description>Divalproex sodium is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure:. Divalproex sodium USP occurs as a white crystalline powder with a characteristic odor. Divalproex sodium delayed-release tablets, USP are for oral administration. Divalproex sodium delayed-release tablets, USP are supplied in three dosage strengths containing divalproex sodium USP equivalent to 125 mg, 250 mg, or 500 mg of valproic acid. Inactive Ingredients. Divalproex sodium delayed-release tablets, USP: silicon dioxide, microcrystalline cellulose, croscarmellose sodium, povidone (Kollidon 30), hydroxypropyl cellulose low substituted, talc, methylene chloride, methacrylic acid: ethyl acrylate copolymer (1:1), and diethyl phthalate. In addition, 125 mg tablets are coated with opadry clear 04K59023 and opadry II complete film coating system 86G540000 pink. Opadry clear 04K59023 contains hypromellose and triacetin, opadry II complete film coating system 86G540000 pink contains polyvinyl alcohol, talc, titanium dioxide, macrogol/PEG 3350, FD&C Red #40, lecithin (soya), and vanillin. 250 mg tablets are coated with opadry clear 04K59023 and opadry II 86G53866 orange. Opadry clear 04K59023 contains hypromellose and triacetin, opadry II 86G53866 orange contains polyvinyl alcohol, talc, titanium dioxide, macrogol/PEG 3350, lecithin (soya), vanillin, FD&C Yellow #6, and iron oxide yellow. 500 mg tablets are coated with opadry clear 04K59023 and opadry II 86G84795 pink. Opadry clear 04K59023 contains hypromellose and triacetin, opadry II 86G84795 pink contains polyvinyl alcohol, talc, titanium dioxide, macrogol/PEG 3350, lecithin (soya), FD&C Red #40, vanillin, and FD&C Blue #2. The tablets are printed with opacode black S-1-17823 containing shellac glaze in ethanol, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol, and ammonium hydroxide.</Description>
</NDC>
</NDCList>