{
"NDC": [
{
"NDCCode": "67296-1202-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (67296-1202-6) ",
"NDC11Code": "67296-1202-06",
"ProductNDC": "67296-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20111101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076164",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20111101",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Hypertension. Lisinopril is indicated for the treatment of hypertension in adult patients and pediatric patients 6 years of age and older to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents [see CLINICAL STUDIES (14.1)]. 1.2 Heart Failure. Lisinopril is indicated to reduce signs and symptoms of systolic heart failure [see CLINICAL STUDIES (14.2)]. 1.3 Reduction of Mortality in Acute Myocardial Infarction. Lisinopril is indicated for the reduction of mortality in treatment of hemodynamically stable patients within 24 hours of acute myocardial infarction. Patients should receive, as appropriate, the standard recommended treatments such as thrombolytics, aspirin and beta-blockers [see CLINICAL STUDIES (14.3)].",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. [Chemical Structure]. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch."
},
{
"NDCCode": "0472-1202-06",
"PackageDescription": "6 SUPPOSITORY in 1 BOX (0472-1202-06)",
"NDC11Code": "00472-1202-06",
"ProductNDC": "0472-1202",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Feverall Junior",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "19800401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018337",
"LabelerName": "Actavis Mid Atlantic LLC",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "325",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-03-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "64942-1202-6",
"PackageDescription": "1 CONTAINER in 1 CARTON (64942-1202-6) > 62 g in 1 CONTAINER (64942-1202-5) ",
"NDC11Code": "64942-1202-06",
"ProductNDC": "64942-1202",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Degree",
"ProprietaryNameSuffix": "Clinical Men Sport Strength Antiperspirant And Deodorant",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201030",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Conopco Inc. d/b/a Unilever",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "20",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2021-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20201030",
"SamplePackage": "N"
},
{
"NDCCode": "85509-1202-6",
"PackageDescription": "60 TABLET, DELAYED RELEASE in 1 BOTTLE (85509-1202-6) ",
"NDC11Code": "85509-1202-06",
"ProductNDC": "85509-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naproxen And Esomeprazole Magnesium",
"NonProprietaryName": "Naproxen And Esomeprazole Magnesium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20221006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213699",
"LabelerName": "PHOENIX RX LLC",
"SubstanceName": "NAPROXEN; ESOMEPRAZOLE MAGNESIUM",
"StrengthNumber": "375; 20",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250721",
"SamplePackage": "N",
"IndicationAndUsage": "Naproxen and esomeprazole magnesium delayed-release tablets, a combination of naproxen and esomeprazole magnesium, is indicated in adult and adolescent patients 12 years of age and older weighing at least 38 kg, requiring naproxen for symptomatic relief of arthritis and esomeprazole magnesium to decrease the risk for developing naproxen-associated gastric ulcers. The naproxen component of naproxen and esomeprazole magnesium delayed-release tablet is indicated for relief of signs and symptoms of: 1 osteoarthritis, rheumatoid arthritis and ankylosing spondylitis in adults., 2 juvenile idiopathic arthritis (JIA) in adolescent patients.",
"Description": "The active ingredients of naproxen and esomeprazole magnesium delayed-release tablets are naproxen, USP which is an NSAID and esomeprazole magnesium, USP which is a Proton Pump Inhibitor (PPI). Naproxen and esomeprazole magnesium delayed-release tablets are combination of a nonsteroidal anti-inflammatory drug and a PPI available as an oval, yellow, multi-layer, delayed-release tablet combining an enteric-coated naproxen core and an immediate-release esomeprazole magnesium layer surrounding the core. Each strength contains either 375 mg of naproxen, USP and 20 mg of esomeprazole (equivalent to 21.75 mg esomeprazole magnesium dihydrate) or 500 mg of naproxen and 20 mg of esomeprazole (equivalent to 21.75 mg esomeprazole magnesium dihydrate) for oral administration. The inactive ingredients are microcrystalline cellulose, croscarmellose sodium, povidone, colloidal silicon dioxide, magnesium stearate, methacrylic acid and ethyl acrylate copolymer, talc, triethy citrate, hypromellose, macrogol, sodium lauryl sulfate, magnesium oxide, polyethylene glycol, ferric oxide yellow. The imprinting ink contains shellac glaze, black iron oxide, propylene glycol, ammonium hydroxide. The chemical name for naproxen, USP is (S)-2-(6-Methoxy-naphth-2-yl) propionic acid. Naproxen, USP has the following structure:. Naproxen, USP has a molecular weight of 230.26 and a molecular formula of C 14H 14O 3. Naproxen, USP is an odorless, white to off-white crystalline powder. It is practically insoluble in water and soluble in ethanol and methanol. The octanol/water partition coefficient of naproxen is 3.18. The chemical name for esomeprazole is Magnesium bis [5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethylpyridin-2-yl)methyl]sulphinyl]-1Hbenzimidazol-1- ide]dihydrate. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S-and R-isomers. Its molecular formula is C 34H 36N 6O 6S 2Mg.2H 2O with molecular weight of 749.15 as a dihydrate and 713.15 on an anhydrous basis. The structural formula is:. The magnesium salt is a white to slightly colored powder. It contains 2 moles of water of solvation and is slightly soluble in methanol, practically insoluble in water and heptane. The stability of esomeprazole magnesium, USP is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C."
},
{
"NDCCode": "67296-1202-1",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-1202-1) ",
"NDC11Code": "67296-1202-01",
"ProductNDC": "67296-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20111101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076164",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20111101",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Hypertension. Lisinopril is indicated for the treatment of hypertension in adult patients and pediatric patients 6 years of age and older to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents [see CLINICAL STUDIES (14.1)]. 1.2 Heart Failure. Lisinopril is indicated to reduce signs and symptoms of systolic heart failure [see CLINICAL STUDIES (14.2)]. 1.3 Reduction of Mortality in Acute Myocardial Infarction. Lisinopril is indicated for the reduction of mortality in treatment of hemodynamically stable patients within 24 hours of acute myocardial infarction. Patients should receive, as appropriate, the standard recommended treatments such as thrombolytics, aspirin and beta-blockers [see CLINICAL STUDIES (14.3)].",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. [Chemical Structure]. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch."
},
{
"NDCCode": "67296-1202-2",
"PackageDescription": "90 TABLET in 1 BOTTLE (67296-1202-2) ",
"NDC11Code": "67296-1202-02",
"ProductNDC": "67296-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20111101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076164",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20111101",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Hypertension. Lisinopril is indicated for the treatment of hypertension in adult patients and pediatric patients 6 years of age and older to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents [see CLINICAL STUDIES (14.1)]. 1.2 Heart Failure. Lisinopril is indicated to reduce signs and symptoms of systolic heart failure [see CLINICAL STUDIES (14.2)]. 1.3 Reduction of Mortality in Acute Myocardial Infarction. Lisinopril is indicated for the reduction of mortality in treatment of hemodynamically stable patients within 24 hours of acute myocardial infarction. Patients should receive, as appropriate, the standard recommended treatments such as thrombolytics, aspirin and beta-blockers [see CLINICAL STUDIES (14.3)].",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. [Chemical Structure]. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch."
},
{
"NDCCode": "67296-1202-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-1202-3) ",
"NDC11Code": "67296-1202-03",
"ProductNDC": "67296-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20111101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076164",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20111101",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Hypertension. Lisinopril is indicated for the treatment of hypertension in adult patients and pediatric patients 6 years of age and older to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents [see CLINICAL STUDIES (14.1)]. 1.2 Heart Failure. Lisinopril is indicated to reduce signs and symptoms of systolic heart failure [see CLINICAL STUDIES (14.2)]. 1.3 Reduction of Mortality in Acute Myocardial Infarction. Lisinopril is indicated for the reduction of mortality in treatment of hemodynamically stable patients within 24 hours of acute myocardial infarction. Patients should receive, as appropriate, the standard recommended treatments such as thrombolytics, aspirin and beta-blockers [see CLINICAL STUDIES (14.3)].",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. [Chemical Structure]. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch."
},
{
"NDCCode": "67296-1202-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (67296-1202-9) ",
"NDC11Code": "67296-1202-09",
"ProductNDC": "67296-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20111101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076164",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20111101",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Hypertension. Lisinopril is indicated for the treatment of hypertension in adult patients and pediatric patients 6 years of age and older to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents [see CLINICAL STUDIES (14.1)]. 1.2 Heart Failure. Lisinopril is indicated to reduce signs and symptoms of systolic heart failure [see CLINICAL STUDIES (14.2)]. 1.3 Reduction of Mortality in Acute Myocardial Infarction. Lisinopril is indicated for the reduction of mortality in treatment of hemodynamically stable patients within 24 hours of acute myocardial infarction. Patients should receive, as appropriate, the standard recommended treatments such as thrombolytics, aspirin and beta-blockers [see CLINICAL STUDIES (14.3)].",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. [Chemical Structure]. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch."
},
{
"NDCCode": "0456-1202-04",
"PackageDescription": "1 BOTTLE in 1 CARTON (0456-1202-04) / 4 CAPSULE, GELATIN COATED in 1 BOTTLE",
"NDC11Code": "00456-1202-04",
"ProductNDC": "0456-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linzess",
"NonProprietaryName": "Linaclotide",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120908",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202811",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "LINACLOTIDE",
"StrengthNumber": "290",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Guanylate Cyclase Activators [MoA], Guanylate Cyclase-C Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120908",
"SamplePackage": "Y",
"IndicationAndUsage": "LINZESS is indicated for the treatment of. irritable bowel syndrome with constipation (IBS-C) in adults and pediatric patients 7 years of age and older. chronic idiopathic constipation (CIC) in adults. functional constipation (FC) in pediatric patients 2 years of age and older.",
"Description": "LINZESS (linaclotide) is a guanylate cyclase-C (GC-C) agonist. Linaclotide is a 14-amino acid peptide with the following chemical name: L-cysteinyl-L-cysteinyl-L-glutamyl-L-tyrosyl-L-cysteinyl-L-cysteinyl-L-asparaginyl-L-prolyl-L-alanyl-L-cysteinyl-L-threonyl-glycyl-L-cysteinyl-L-tyrosine, cyclic (1-6), (2-10), (5-13)-tris (disulfide). The molecular formula of linaclotide is C59H79N15O21S6 and its molecular weight is 1526.8. The amino acid sequence for linaclotide is shown below. Linaclotide is an amorphous, white to off-white powder. It is slightly soluble in water and aqueous sodium chloride (0.9%). LINZESS contains linaclotide-coated beads in hard gelatin capsules. LINZESS is available as 72 mcg, 145 mcg and 290 mcg capsules for oral administration. The inactive ingredients of LINZESS 72 mcg capsules include: calcium chloride dihydrate, L-histidine, microcrystalline cellulose, polyvinyl alcohol, and talc. The components of the capsule shell include gelatin and titanium dioxide. The inactive ingredients of LINZESS 145 mcg and 290 mcg capsules include: calcium chloride dihydrate, hypromellose, L-leucine, and microcrystalline cellulose. The components of the capsule shell include gelatin and titanium dioxide."
},
{
"NDCCode": "0456-1202-07",
"PackageDescription": "1 BOTTLE in 1 CARTON (0456-1202-07) / 7 CAPSULE, GELATIN COATED in 1 BOTTLE",
"NDC11Code": "00456-1202-07",
"ProductNDC": "0456-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linzess",
"NonProprietaryName": "Linaclotide",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120908",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202811",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "LINACLOTIDE",
"StrengthNumber": "290",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Guanylate Cyclase Activators [MoA], Guanylate Cyclase-C Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190517",
"SamplePackage": "Y",
"IndicationAndUsage": "LINZESS is indicated for the treatment of. irritable bowel syndrome with constipation (IBS-C) in adults and pediatric patients 7 years of age and older. chronic idiopathic constipation (CIC) in adults. functional constipation (FC) in pediatric patients 2 years of age and older.",
"Description": "LINZESS (linaclotide) is a guanylate cyclase-C (GC-C) agonist. Linaclotide is a 14-amino acid peptide with the following chemical name: L-cysteinyl-L-cysteinyl-L-glutamyl-L-tyrosyl-L-cysteinyl-L-cysteinyl-L-asparaginyl-L-prolyl-L-alanyl-L-cysteinyl-L-threonyl-glycyl-L-cysteinyl-L-tyrosine, cyclic (1-6), (2-10), (5-13)-tris (disulfide). The molecular formula of linaclotide is C59H79N15O21S6 and its molecular weight is 1526.8. The amino acid sequence for linaclotide is shown below. Linaclotide is an amorphous, white to off-white powder. It is slightly soluble in water and aqueous sodium chloride (0.9%). LINZESS contains linaclotide-coated beads in hard gelatin capsules. LINZESS is available as 72 mcg, 145 mcg and 290 mcg capsules for oral administration. The inactive ingredients of LINZESS 72 mcg capsules include: calcium chloride dihydrate, L-histidine, microcrystalline cellulose, polyvinyl alcohol, and talc. The components of the capsule shell include gelatin and titanium dioxide. The inactive ingredients of LINZESS 145 mcg and 290 mcg capsules include: calcium chloride dihydrate, hypromellose, L-leucine, and microcrystalline cellulose. The components of the capsule shell include gelatin and titanium dioxide."
},
{
"NDCCode": "0456-1202-30",
"PackageDescription": "1 BOTTLE in 1 CARTON (0456-1202-30) / 30 CAPSULE, GELATIN COATED in 1 BOTTLE",
"NDC11Code": "00456-1202-30",
"ProductNDC": "0456-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linzess",
"NonProprietaryName": "Linaclotide",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120908",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202811",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "LINACLOTIDE",
"StrengthNumber": "290",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Guanylate Cyclase Activators [MoA], Guanylate Cyclase-C Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120908",
"SamplePackage": "N",
"IndicationAndUsage": "LINZESS is indicated for the treatment of. irritable bowel syndrome with constipation (IBS-C) in adults and pediatric patients 7 years of age and older. chronic idiopathic constipation (CIC) in adults. functional constipation (FC) in pediatric patients 2 years of age and older.",
"Description": "LINZESS (linaclotide) is a guanylate cyclase-C (GC-C) agonist. Linaclotide is a 14-amino acid peptide with the following chemical name: L-cysteinyl-L-cysteinyl-L-glutamyl-L-tyrosyl-L-cysteinyl-L-cysteinyl-L-asparaginyl-L-prolyl-L-alanyl-L-cysteinyl-L-threonyl-glycyl-L-cysteinyl-L-tyrosine, cyclic (1-6), (2-10), (5-13)-tris (disulfide). The molecular formula of linaclotide is C59H79N15O21S6 and its molecular weight is 1526.8. The amino acid sequence for linaclotide is shown below. Linaclotide is an amorphous, white to off-white powder. It is slightly soluble in water and aqueous sodium chloride (0.9%). LINZESS contains linaclotide-coated beads in hard gelatin capsules. LINZESS is available as 72 mcg, 145 mcg and 290 mcg capsules for oral administration. The inactive ingredients of LINZESS 72 mcg capsules include: calcium chloride dihydrate, L-histidine, microcrystalline cellulose, polyvinyl alcohol, and talc. The components of the capsule shell include gelatin and titanium dioxide. The inactive ingredients of LINZESS 145 mcg and 290 mcg capsules include: calcium chloride dihydrate, hypromellose, L-leucine, and microcrystalline cellulose. The components of the capsule shell include gelatin and titanium dioxide."
},
{
"NDCCode": "0480-4076-30",
"PackageDescription": "6 POUCH in 1 CARTON (0480-4076-30) / 5 VIAL, SINGLE-DOSE in 1 POUCH / .4 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00480-4076-30",
"ProductNDC": "0480-4076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclosporine",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "EMULSION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20251028",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203880",
"LabelerName": "Teva Pharmaceuticals, Inc.",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251028",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclosporine ophthalmic emulsion is indicated to increase tear production in patients whose tear production is presumed to be suppressed due to ocular inflammation associated with keratoconjunctivitis sicca. Increased tear production was not seen in patients currently taking topical anti-inflammatory drugs or using punctal plugs.",
"Description": "Cyclosporine ophthalmic emulsion, 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. C62H111N11O12 M.W. 1202.6. Cyclosporine, USP is a white or almost white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5 to 8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine, USP, 0.05%. Inactives: carbomer copolymer type A, castor oil, glycerin, polysorbate 80, water for injection and sodium hydroxide to adjust pH."
},
{
"NDCCode": "0480-4076-60",
"PackageDescription": "12 POUCH in 1 CARTON (0480-4076-60) / 5 VIAL, SINGLE-DOSE in 1 POUCH / .4 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00480-4076-60",
"ProductNDC": "0480-4076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclosporine",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "EMULSION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20251028",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203880",
"LabelerName": "Teva Pharmaceuticals, Inc.",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251028",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclosporine ophthalmic emulsion is indicated to increase tear production in patients whose tear production is presumed to be suppressed due to ocular inflammation associated with keratoconjunctivitis sicca. Increased tear production was not seen in patients currently taking topical anti-inflammatory drugs or using punctal plugs.",
"Description": "Cyclosporine ophthalmic emulsion, 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. C62H111N11O12 M.W. 1202.6. Cyclosporine, USP is a white or almost white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5 to 8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine, USP, 0.05%. Inactives: carbomer copolymer type A, castor oil, glycerin, polysorbate 80, water for injection and sodium hydroxide to adjust pH."
},
{
"NDCCode": "12496-1202-3",
"PackageDescription": "30 POUCH in 1 CARTON (12496-1202-3) / 1 FILM, SOLUBLE in 1 POUCH (12496-1202-1) ",
"NDC11Code": "12496-1202-03",
"ProductNDC": "12496-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Suboxone",
"NonProprietaryName": "Buprenorphine Hydrochloride, Naloxone Hydrochloride",
"DosageFormName": "FILM, SOLUBLE",
"RouteName": "BUCCAL; SUBLINGUAL",
"StartMarketingDate": "20100913",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022410",
"LabelerName": "INDIVIOR INC.",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE",
"StrengthNumber": "2; .5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100913",
"SamplePackage": "N",
"IndicationAndUsage": "SUBOXONE sublingual film is indicated for treatment of opioid dependence. SUBOXONE sublingual film should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "SUBOXONE® (buprenorphine and naloxone) sublingual film is an orange film, imprinted with a logo identifying the product and strength in white ink. It contains buprenorphine HCl, a mu-opioid receptor partial agonist, and a kappa-opioid receptor antagonist, and naloxone HCl dihydrate, an opioid antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual or buccal administration and is available in four dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone, 4 mg buprenorphine with 1 mg naloxone, 8 mg buprenorphine with 2 mg naloxone and 12 mg buprenorphine with 3 mg naloxone. Each film also contains polyethylene oxide, hydroxypropyl methylcellulose, maltitol, acesulfame potassium, lime flavor, citric acid, sodium citrate, FD&C yellow #6, and white ink. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14- ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure. Buprenorphine HCl has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate is 17-Allyl-4,5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure. Naloxone hydrochloride dihydrate has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "13845-1202-2",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (13845-1202-2) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "13845-1202-02",
"ProductNDC": "13845-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cycloserine",
"NonProprietaryName": "Cycloserine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20130912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060593",
"LabelerName": "Parsolex Gmp Center, Inc.",
"SubstanceName": "CYCLOSERINE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20130912",
"SamplePackage": "N",
"IndicationAndUsage": "Cycloserine is indicated in the treatment of active pulmonary and extrapulmonary tuberculosis (including renal disease) when the causative organisms are susceptible to this drug and when treatment with the primary medications (streptomycin, isoniazid, rifampin, and ethambutol) has proved inadequate. Like all antituberculosis drugs, cycloserine should be administered in conjunction with other effective chemotherapy and not as the sole therapeutic agent. Cycloserine may be effective in the treatment of acute urinary tract infections caused by susceptible strains of gram-positive and gram- negative bacteria. Use of cycloserine in these infections should be considered only when more conventional therapy has failed and when the organism has been demonstrated to be susceptible to the drug.",
"Description": "D -Cycloserine, (R)-4-amino-3-isoxazolidinone, is a broad-spectrum antibiotic that is produced by a strain of Streptomyces orchidaceus and has also been synthesized. Cycloserine is a white to off-white powder that is soluble in water and stable in alkaline solution. It is rapidly destroyed at a neutral or acid pH. Cycloserine has a pH between 5.5 and 6.5 in a solution containing 100 mg/mL. The molecular weight of cycloserine is 102.09, and it has an empirical formula of C 3H6N2O 2 . The structural formula of cycloserine is as follows:. Each capsule contains cycloserine, 250 mg (2.45 mmol); D & C Yellow No. 10, F D & C Blue No. 1, F D & C Red No. 3, F D & C Yellow No. 6, gelatin, iron oxide, talc, and titanium dioxide."
},
{
"NDCCode": "22840-1202-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-1202-2) ",
"NDC11Code": "22840-1202-02",
"ProductNDC": "22840-1202",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Bahia Grass",
"NonProprietaryName": "Paspalum Notatum",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "PASPALUM NOTATUM POLLEN",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "22840-1202-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-1202-4) ",
"NDC11Code": "22840-1202-04",
"ProductNDC": "22840-1202",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Bahia Grass",
"NonProprietaryName": "Paspalum Notatum",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "PASPALUM NOTATUM POLLEN",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "47335-506-96",
"PackageDescription": "6 POUCH in 1 BOX (47335-506-96) / 10 VIAL, SINGLE-DOSE in 1 POUCH / .25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "47335-0506-96",
"ProductNDC": "47335-506",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cequa",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC; TOPICAL",
"StartMarketingDate": "20180815",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210913",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": ".0009",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180815",
"SamplePackage": "N",
"IndicationAndUsage": "CEQUA ophthalmic solution is a calcineurin inhibitor immunosuppressant indicated to increase tear production in patients with keratoconjunctivitis sicca (dry eye). (1).",
"Description": "CEQUA (cyclosporine ophthalmic solution) 0.09% contains a topical calcineurin inhibitor immunosuppressant. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. Structural Formula. Formula: C62H111N11O12 Mol. Wt.: 1202.6. Cyclosporine is a white powder that is insoluble in water. CEQUA is supplied as a sterile, clear, colorless ophthalmic solution for topical ophthalmic use. It has an osmolality of 160 to 190 mOsmol/kg and a pH of 6.5-7.2. Each mL of CEQUA contains: : 1 Active: cyclosporine 0.09%, 2 Inactives: Polyoxyl 40 Hydrogenated Castor Oil, Octoxynol-40, polyvinylpyrrolidone, sodium phosphate monobasic dihydrate, sodium phosphate dibasic anhydrous, sodium chloride, water for injection, and sodium hydroxide or hydrochloric acid to adjust pH."
},
{
"NDCCode": "47335-507-97",
"PackageDescription": "1 POUCH in 1 BOX (47335-507-97) / 10 VIAL, SINGLE-DOSE in 1 POUCH / .25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "47335-0507-97",
"ProductNDC": "47335-507",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cequa",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC; TOPICAL",
"StartMarketingDate": "20180815",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210913",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": ".0009",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180815",
"SamplePackage": "Y",
"IndicationAndUsage": "CEQUA ophthalmic solution is a calcineurin inhibitor immunosuppressant indicated to increase tear production in patients with keratoconjunctivitis sicca (dry eye). (1).",
"Description": "CEQUA (cyclosporine ophthalmic solution) 0.09% contains a topical calcineurin inhibitor immunosuppressant. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. Structural Formula. Formula: C62H111N11O12 Mol. Wt.: 1202.6. Cyclosporine is a white powder that is insoluble in water. CEQUA is supplied as a sterile, clear, colorless ophthalmic solution for topical ophthalmic use. It has an osmolality of 160 to 190 mOsmol/kg and a pH of 6.5-7.2. Each mL of CEQUA contains: : 1 Active: cyclosporine 0.09%, 2 Inactives: Polyoxyl 40 Hydrogenated Castor Oil, Octoxynol-40, polyvinylpyrrolidone, sodium phosphate monobasic dihydrate, sodium phosphate dibasic anhydrous, sodium chloride, water for injection, and sodium hydroxide or hydrochloric acid to adjust pH."
},
{
"NDCCode": "48951-1202-1",
"PackageDescription": "10 AMPULE in 1 BOX (48951-1202-1) / 1 mL in 1 AMPULE",
"NDC11Code": "48951-1202-01",
"ProductNDC": "48951-1202",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aurum Prunus",
"NonProprietaryName": "Aurum Prunus",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20090901",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Uriel Pharmacy Inc.",
"SubstanceName": "GOLD; SLOE",
"StrengthNumber": "10; 6",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20090901",
"SamplePackage": "N",
"IndicationAndUsage": "Directions: FOR ORAL USE."
},
{
"NDCCode": "53002-1202-0",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (53002-1202-0) ",
"NDC11Code": "53002-1202-00",
"ProductNDC": "53002-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nortriptyline Hydrochloride",
"NonProprietaryName": "Nortriptyline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19950405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074132",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "NORTRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Nortriptyline hydrochloride capsules are indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.",
"Description": "Nortriptyline hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5-ylidene)-N-methyl-, hydrochloride. The structural formula is as follows. C19H21NHCl M.W. 299.84. Nortriptyline hydrochloride, USP is a white to off-white powder, having a slight, characteristic odor. It is soluble in water and in chloroform; sparingly soluble in methanol; and practically insoluble in most organic solvents. Each capsule, for oral administration, contains nortriptyline hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg or 75 mg nortriptyline. In addition, each capsule contains the following inactive ingredients: corn starch, dimethicone, gelatin, iron oxide black, potassium hydroxide, propylene glycol, shellac glaze, sodium lauryl sulfate, strong ammonia solution, and titanium dioxide. The 10 mg, 25 mg and 75 mg capsules also contain D&C yellow #10, FD&C blue #1, and FD&C yellow #6."
},
{
"NDCCode": "53002-1202-3",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (53002-1202-3) ",
"NDC11Code": "53002-1202-03",
"ProductNDC": "53002-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nortriptyline Hydrochloride",
"NonProprietaryName": "Nortriptyline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19950405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074132",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "NORTRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Nortriptyline hydrochloride capsules are indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.",
"Description": "Nortriptyline hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5-ylidene)-N-methyl-, hydrochloride. The structural formula is as follows. C19H21NHCl M.W. 299.84. Nortriptyline hydrochloride, USP is a white to off-white powder, having a slight, characteristic odor. It is soluble in water and in chloroform; sparingly soluble in methanol; and practically insoluble in most organic solvents. Each capsule, for oral administration, contains nortriptyline hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg or 75 mg nortriptyline. In addition, each capsule contains the following inactive ingredients: corn starch, dimethicone, gelatin, iron oxide black, potassium hydroxide, propylene glycol, shellac glaze, sodium lauryl sulfate, strong ammonia solution, and titanium dioxide. The 10 mg, 25 mg and 75 mg capsules also contain D&C yellow #10, FD&C blue #1, and FD&C yellow #6."
},
{
"NDCCode": "60505-0133-0",
"PackageDescription": "30 CAPSULE, GELATIN COATED in 1 BOTTLE (60505-0133-0) ",
"NDC11Code": "60505-0133-00",
"ProductNDC": "60505-0133",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclosporine",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065040",
"LabelerName": "Apotex Corp.",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclosporine capsules, (NON-MODIFIED), in combination with adrenal corticosteroids, are indicated for the: 1 Prophylaxis of organ rejection in kidney, liver, and heart allogeneic transplants., 2 Treatment of chronic rejection in patients previously treated with other immunosuppressive agents.",
"Description": "Cyclosporine, USP, the active principle in cyclosporine capsules, USP (NON-MODIFIED) is a cyclic polypeptide immunosuppressant agent consisting of 11 amino acids. It is produced as a metabolite by the fungus species Tolypocladium inflatum Gams. Chemically, cyclosporine is designated as [R-[R*,R*-(E)]]-cyclic(L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl-3-hydroxy-N,4-dimethyl-L-2-amino-6-octenoyl-L-α-amino-butyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl). The chemical structure of cyclosporine (also known as cyclosporin A) is:. C62H111N11O12 Mol. wt. 1202.61. Cyclosporine capsules, USP (NON-MODIFIED) are available in 25 mg and 100 mg strengths. Each 25 mg capsule contains:Cyclosporine, USP……………………………………………………………………...25 mg. Each 100 mg capsule contains:Cyclosporine, USP……………………………………………………..……………...100 mg. Each capsule contains the following inactive ingredients: methanol, sodium lauryl sulfate and talc. The 25 mg and the 100 mg capsule shell contains gelatin, red iron oxide and titanium dioxide. The 25 mg and 100 mg capsule black imprinting ink contains the following inactive ingredients: n-butyl alcohol, D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C blue #2 aluminum lake, FD&C red #40 aluminum lake, pharmaceutical glaze, propylene glycol, SDA-3A alcohol and synthetic black iron oxide."
},
{
"NDCCode": "60505-0134-0",
"PackageDescription": "30 CAPSULE, GELATIN COATED in 1 BOTTLE (60505-0134-0) ",
"NDC11Code": "60505-0134-00",
"ProductNDC": "60505-0134",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclosporine",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065040",
"LabelerName": "Apotex Corp.",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclosporine capsules, (NON-MODIFIED), in combination with adrenal corticosteroids, are indicated for the: 1 Prophylaxis of organ rejection in kidney, liver, and heart allogeneic transplants., 2 Treatment of chronic rejection in patients previously treated with other immunosuppressive agents.",
"Description": "Cyclosporine, USP, the active principle in cyclosporine capsules, USP (NON-MODIFIED) is a cyclic polypeptide immunosuppressant agent consisting of 11 amino acids. It is produced as a metabolite by the fungus species Tolypocladium inflatum Gams. Chemically, cyclosporine is designated as [R-[R*,R*-(E)]]-cyclic(L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl-3-hydroxy-N,4-dimethyl-L-2-amino-6-octenoyl-L-α-amino-butyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl). The chemical structure of cyclosporine (also known as cyclosporin A) is:. C62H111N11O12 Mol. wt. 1202.61. Cyclosporine capsules, USP (NON-MODIFIED) are available in 25 mg and 100 mg strengths. Each 25 mg capsule contains:Cyclosporine, USP……………………………………………………………………...25 mg. Each 100 mg capsule contains:Cyclosporine, USP……………………………………………………..……………...100 mg. Each capsule contains the following inactive ingredients: methanol, sodium lauryl sulfate and talc. The 25 mg and the 100 mg capsule shell contains gelatin, red iron oxide and titanium dioxide. The 25 mg and 100 mg capsule black imprinting ink contains the following inactive ingredients: n-butyl alcohol, D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C blue #2 aluminum lake, FD&C red #40 aluminum lake, pharmaceutical glaze, propylene glycol, SDA-3A alcohol and synthetic black iron oxide."
},
{
"NDCCode": "60505-6202-1",
"PackageDescription": "30 VIAL in 1 TRAY (60505-6202-1) / .4 mL in 1 VIAL",
"NDC11Code": "60505-6202-01",
"ProductNDC": "60505-6202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclosporine",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "EMULSION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20220207",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA050790",
"LabelerName": "Apotex Corp",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220207",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclosporine ophthalmic emulsion, 0.05% is indicated to increase tear production in patients whose tear production is presumed to be suppressed due to ocular inflammation associated with keratoconjunctivitis sicca. Increased tear production was not seen in patients currently taking topical anti-inflammatory drugs or using punctal plugs.",
"Description": "Cyclosporine ophthalmic emulsion, 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. Structural Formula. Formula: C62H111N11O12 Mol. Wt.: 1202.6. Cyclosporine is a fine white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5-8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine 0.05%. Inactives: glycerin; castor oil; polysorbate 80; carbomer copolymer type A; purified water; and sodium hydroxide to adjust pH."
},
{
"NDCCode": "60505-6202-2",
"PackageDescription": "60 VIAL in 1 TRAY (60505-6202-2) / .4 mL in 1 VIAL",
"NDC11Code": "60505-6202-02",
"ProductNDC": "60505-6202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclosporine",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "EMULSION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20220207",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA050790",
"LabelerName": "Apotex Corp",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220207",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclosporine ophthalmic emulsion, 0.05% is indicated to increase tear production in patients whose tear production is presumed to be suppressed due to ocular inflammation associated with keratoconjunctivitis sicca. Increased tear production was not seen in patients currently taking topical anti-inflammatory drugs or using punctal plugs.",
"Description": "Cyclosporine ophthalmic emulsion, 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. Structural Formula. Formula: C62H111N11O12 Mol. Wt.: 1202.6. Cyclosporine is a fine white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5-8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine 0.05%. Inactives: glycerin; castor oil; polysorbate 80; carbomer copolymer type A; purified water; and sodium hydroxide to adjust pH."
},
{
"NDCCode": "62106-1202-0",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (62106-1202-0) > 30 mL in 1 BOTTLE, GLASS",
"NDC11Code": "62106-1202-00",
"ProductNDC": "62106-1202",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kalium Carbonicum Plex",
"NonProprietaryName": "Asafoetida, Carbo Vegetabilis, Cinchona Succirubra, Kali Carbonicum, Lycopodium Clavatum, Nux Moschata, Nux Vomica, Raphanus Sativus Var Niger",
"DosageFormName": "LIQUID",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20151216",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Seroyal USA",
"SubstanceName": "ASAFETIDA; ACTIVATED CHARCOAL; CINCHONA PUBESCENS BARK; NUTMEG; POTASSIUM CARBONATE; LYCOPODIUM CLAVATUM SPORE; STRYCHNOS NUX-VOMICA SEED; RAPHANUS SATIVUS",
"StrengthNumber": "6; 6; 6; 6; 6; 6; 6; 6",
"StrengthUnit": "[hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Dietary Proteins [CS], Food Additives [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Plant Proteins [CS], Seed Storage Proteins [CS], Seed Storage Proteins [CS]",
"Status": "Active",
"LastUpdate": "2022-11-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151216",
"SamplePackage": "N",
"IndicationAndUsage": "Uses. For the temporary relief of symptoms associated with digestive upset such as: Bloating. Indigestion. Colic. Directions To be taken ten minutes away from food. Invert bottle and shake lightly allowing drops to fall directly under the tongue or into ¼ oz of water. Hold contents for about 20 seconds and swallow. To promote drop flow, invert bottle and shake before each use. Dosage frequency may be increased up to six times daily depending on the severity of symptoms. Adults and adolescents (12 years and older). Take 10 drops three times daily or as recommended by your healthcare practitioner. Children (under 12 years). Take under the direction of your healthcare practitioner."
},
{
"NDCCode": "65086-001-05",
"PackageDescription": "1 POUCH in 1 CARTON (65086-001-05) / 5 VIAL, SINGLE-DOSE in 1 POUCH / .3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "65086-0001-05",
"ProductNDC": "65086-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verkazia",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "EMULSION",
"RouteName": "OPHTHALMIC; TOPICAL",
"StartMarketingDate": "20220201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA214965",
"LabelerName": "Santen Incorporated",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220201",
"SamplePackage": "Y",
"IndicationAndUsage": "Verkazia ophthalmic emulsion is indicated for the treatment of vernal keratoconjunctivitis (VKC) in children and adults.",
"Description": "Verkazia (cyclosporine ophthalmic emulsion) 0.1% contains a topical calcineurin inhibitor immunosuppressant. Cyclosporine is a white or almost white powder. Cyclosporine’s chemical name is Cyclo[[( E)-(2 S,3 R,4 R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl- N-methylglycyl- N-methyl-L-leucyl-L-valyl- N-methyl-L-leucyl-L-alanyl-D-alanyl- N-methyl-L-leucyl- N-methyl-L-leucyl- N-methyl-L-valyl] and it has the following structure:. Structural Formula. Formula: C 62H 111N 11O 12 Mol. Wt.: 1202.61. Verkazia ophthalmic emulsion is a sterile, unpreserved topical emulsion. It appears as a milky-white homogeneous emulsion. It has an osmolality of approximately 265 mOsmol/kg and a pH of 5-7. Each mL of Verkazia ophthalmic emulsion contains: Active: Cyclosporine 1 mg/mL. Inactives: Cetalkonium chloride, Glycerol, Medium-chain triglycerides, Poloxamer 188, Sodium Hydroxide to adjust pH, Tyloxapol and Water for Injection."
},
{
"NDCCode": "65086-001-12",
"PackageDescription": "24 POUCH in 1 CARTON (65086-001-12) / 5 VIAL, SINGLE-DOSE in 1 POUCH / .3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "65086-0001-12",
"ProductNDC": "65086-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verkazia",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "EMULSION",
"RouteName": "OPHTHALMIC; TOPICAL",
"StartMarketingDate": "20220201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA214965",
"LabelerName": "Santen Incorporated",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220201",
"SamplePackage": "N",
"IndicationAndUsage": "Verkazia ophthalmic emulsion is indicated for the treatment of vernal keratoconjunctivitis (VKC) in children and adults.",
"Description": "Verkazia (cyclosporine ophthalmic emulsion) 0.1% contains a topical calcineurin inhibitor immunosuppressant. Cyclosporine is a white or almost white powder. Cyclosporine’s chemical name is Cyclo[[( E)-(2 S,3 R,4 R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl- N-methylglycyl- N-methyl-L-leucyl-L-valyl- N-methyl-L-leucyl-L-alanyl-D-alanyl- N-methyl-L-leucyl- N-methyl-L-leucyl- N-methyl-L-valyl] and it has the following structure:. Structural Formula. Formula: C 62H 111N 11O 12 Mol. Wt.: 1202.61. Verkazia ophthalmic emulsion is a sterile, unpreserved topical emulsion. It appears as a milky-white homogeneous emulsion. It has an osmolality of approximately 265 mOsmol/kg and a pH of 5-7. Each mL of Verkazia ophthalmic emulsion contains: Active: Cyclosporine 1 mg/mL. Inactives: Cetalkonium chloride, Glycerol, Medium-chain triglycerides, Poloxamer 188, Sodium Hydroxide to adjust pH, Tyloxapol and Water for Injection."
},
{
"NDCCode": "67046-1202-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-1202-3) ",
"NDC11Code": "67046-1202-03",
"ProductNDC": "67046-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090162",
"LabelerName": "Coupler LLC",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260430",
"SamplePackage": "N",
"IndicationAndUsage": "Topiramate tablets are indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older ( 1.2) , 2 Preventive treatment of migraine in patients 12 years of age and older ( 1.3) .",
"Description": "Topiramate, USP is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round shaped tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate, USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate, USP has the molecular formula C 12H 21NO 8S and a molecular weight of 339.36. Topiramate, USP is designated chemically as 2,3:4,5-Di- O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: lactose monohydrate, pregelatinized corn starch, microcrystalline cellulose, sodium starch glycolate Type A (Potato), magnesium stearate, hypromellose, polysorbate 80, polyethylene glycol, and titanium dioxide. In addition the 25 mg, 100 mg and 200 mg tablets also contain yellow iron oxide; the 25 mg and 100 mg tablets also contain red iron oxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67296-1202-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (67296-1202-6) </PackageDescription>
<NDC11Code>67296-1202-06</NDC11Code>
<ProductNDC>67296-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076164</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Hypertension. Lisinopril is indicated for the treatment of hypertension in adult patients and pediatric patients 6 years of age and older to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents [see CLINICAL STUDIES (14.1)]. 1.2 Heart Failure. Lisinopril is indicated to reduce signs and symptoms of systolic heart failure [see CLINICAL STUDIES (14.2)]. 1.3 Reduction of Mortality in Acute Myocardial Infarction. Lisinopril is indicated for the reduction of mortality in treatment of hemodynamically stable patients within 24 hours of acute myocardial infarction. Patients should receive, as appropriate, the standard recommended treatments such as thrombolytics, aspirin and beta-blockers [see CLINICAL STUDIES (14.3)].</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. [Chemical Structure]. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
</NDC>
<NDC>
<NDCCode>0472-1202-06</NDCCode>
<PackageDescription>6 SUPPOSITORY in 1 BOX (0472-1202-06)</PackageDescription>
<NDC11Code>00472-1202-06</NDC11Code>
<ProductNDC>0472-1202</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Feverall Junior</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>19800401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018337</ApplicationNumber>
<LabelerName>Actavis Mid Atlantic LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>325</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-03-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>64942-1202-6</NDCCode>
<PackageDescription>1 CONTAINER in 1 CARTON (64942-1202-6) > 62 g in 1 CONTAINER (64942-1202-5) </PackageDescription>
<NDC11Code>64942-1202-06</NDC11Code>
<ProductNDC>64942-1202</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Degree</ProprietaryName>
<ProprietaryNameSuffix>Clinical Men Sport Strength Antiperspirant And Deodorant</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201030</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Conopco Inc. d/b/a Unilever</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201030</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>85509-1202-6</NDCCode>
<PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (85509-1202-6) </PackageDescription>
<NDC11Code>85509-1202-06</NDC11Code>
<ProductNDC>85509-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naproxen And Esomeprazole Magnesium</ProprietaryName>
<NonProprietaryName>Naproxen And Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213699</ApplicationNumber>
<LabelerName>PHOENIX RX LLC</LabelerName>
<SubstanceName>NAPROXEN; ESOMEPRAZOLE MAGNESIUM</SubstanceName>
<StrengthNumber>375; 20</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250721</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naproxen and esomeprazole magnesium delayed-release tablets, a combination of naproxen and esomeprazole magnesium, is indicated in adult and adolescent patients 12 years of age and older weighing at least 38 kg, requiring naproxen for symptomatic relief of arthritis and esomeprazole magnesium to decrease the risk for developing naproxen-associated gastric ulcers. The naproxen component of naproxen and esomeprazole magnesium delayed-release tablet is indicated for relief of signs and symptoms of: 1 osteoarthritis, rheumatoid arthritis and ankylosing spondylitis in adults., 2 juvenile idiopathic arthritis (JIA) in adolescent patients.</IndicationAndUsage>
<Description>The active ingredients of naproxen and esomeprazole magnesium delayed-release tablets are naproxen, USP which is an NSAID and esomeprazole magnesium, USP which is a Proton Pump Inhibitor (PPI). Naproxen and esomeprazole magnesium delayed-release tablets are combination of a nonsteroidal anti-inflammatory drug and a PPI available as an oval, yellow, multi-layer, delayed-release tablet combining an enteric-coated naproxen core and an immediate-release esomeprazole magnesium layer surrounding the core. Each strength contains either 375 mg of naproxen, USP and 20 mg of esomeprazole (equivalent to 21.75 mg esomeprazole magnesium dihydrate) or 500 mg of naproxen and 20 mg of esomeprazole (equivalent to 21.75 mg esomeprazole magnesium dihydrate) for oral administration. The inactive ingredients are microcrystalline cellulose, croscarmellose sodium, povidone, colloidal silicon dioxide, magnesium stearate, methacrylic acid and ethyl acrylate copolymer, talc, triethy citrate, hypromellose, macrogol, sodium lauryl sulfate, magnesium oxide, polyethylene glycol, ferric oxide yellow. The imprinting ink contains shellac glaze, black iron oxide, propylene glycol, ammonium hydroxide. The chemical name for naproxen, USP is (S)-2-(6-Methoxy-naphth-2-yl) propionic acid. Naproxen, USP has the following structure:. Naproxen, USP has a molecular weight of 230.26 and a molecular formula of C 14H 14O 3. Naproxen, USP is an odorless, white to off-white crystalline powder. It is practically insoluble in water and soluble in ethanol and methanol. The octanol/water partition coefficient of naproxen is 3.18. The chemical name for esomeprazole is Magnesium bis [5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethylpyridin-2-yl)methyl]sulphinyl]-1Hbenzimidazol-1- ide]dihydrate. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S-and R-isomers. Its molecular formula is C 34H 36N 6O 6S 2Mg.2H 2O with molecular weight of 749.15 as a dihydrate and 713.15 on an anhydrous basis. The structural formula is:. The magnesium salt is a white to slightly colored powder. It contains 2 moles of water of solvation and is slightly soluble in methanol, practically insoluble in water and heptane. The stability of esomeprazole magnesium, USP is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C.</Description>
</NDC>
<NDC>
<NDCCode>67296-1202-1</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-1202-1) </PackageDescription>
<NDC11Code>67296-1202-01</NDC11Code>
<ProductNDC>67296-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076164</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Hypertension. Lisinopril is indicated for the treatment of hypertension in adult patients and pediatric patients 6 years of age and older to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents [see CLINICAL STUDIES (14.1)]. 1.2 Heart Failure. Lisinopril is indicated to reduce signs and symptoms of systolic heart failure [see CLINICAL STUDIES (14.2)]. 1.3 Reduction of Mortality in Acute Myocardial Infarction. Lisinopril is indicated for the reduction of mortality in treatment of hemodynamically stable patients within 24 hours of acute myocardial infarction. Patients should receive, as appropriate, the standard recommended treatments such as thrombolytics, aspirin and beta-blockers [see CLINICAL STUDIES (14.3)].</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. [Chemical Structure]. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
</NDC>
<NDC>
<NDCCode>67296-1202-2</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (67296-1202-2) </PackageDescription>
<NDC11Code>67296-1202-02</NDC11Code>
<ProductNDC>67296-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076164</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Hypertension. Lisinopril is indicated for the treatment of hypertension in adult patients and pediatric patients 6 years of age and older to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents [see CLINICAL STUDIES (14.1)]. 1.2 Heart Failure. Lisinopril is indicated to reduce signs and symptoms of systolic heart failure [see CLINICAL STUDIES (14.2)]. 1.3 Reduction of Mortality in Acute Myocardial Infarction. Lisinopril is indicated for the reduction of mortality in treatment of hemodynamically stable patients within 24 hours of acute myocardial infarction. Patients should receive, as appropriate, the standard recommended treatments such as thrombolytics, aspirin and beta-blockers [see CLINICAL STUDIES (14.3)].</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. [Chemical Structure]. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
</NDC>
<NDC>
<NDCCode>67296-1202-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-1202-3) </PackageDescription>
<NDC11Code>67296-1202-03</NDC11Code>
<ProductNDC>67296-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076164</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Hypertension. Lisinopril is indicated for the treatment of hypertension in adult patients and pediatric patients 6 years of age and older to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents [see CLINICAL STUDIES (14.1)]. 1.2 Heart Failure. Lisinopril is indicated to reduce signs and symptoms of systolic heart failure [see CLINICAL STUDIES (14.2)]. 1.3 Reduction of Mortality in Acute Myocardial Infarction. Lisinopril is indicated for the reduction of mortality in treatment of hemodynamically stable patients within 24 hours of acute myocardial infarction. Patients should receive, as appropriate, the standard recommended treatments such as thrombolytics, aspirin and beta-blockers [see CLINICAL STUDIES (14.3)].</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. [Chemical Structure]. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
</NDC>
<NDC>
<NDCCode>67296-1202-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (67296-1202-9) </PackageDescription>
<NDC11Code>67296-1202-09</NDC11Code>
<ProductNDC>67296-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076164</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Hypertension. Lisinopril is indicated for the treatment of hypertension in adult patients and pediatric patients 6 years of age and older to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents [see CLINICAL STUDIES (14.1)]. 1.2 Heart Failure. Lisinopril is indicated to reduce signs and symptoms of systolic heart failure [see CLINICAL STUDIES (14.2)]. 1.3 Reduction of Mortality in Acute Myocardial Infarction. Lisinopril is indicated for the reduction of mortality in treatment of hemodynamically stable patients within 24 hours of acute myocardial infarction. Patients should receive, as appropriate, the standard recommended treatments such as thrombolytics, aspirin and beta-blockers [see CLINICAL STUDIES (14.3)].</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. [Chemical Structure]. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
</NDC>
<NDC>
<NDCCode>0456-1202-04</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0456-1202-04) / 4 CAPSULE, GELATIN COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>00456-1202-04</NDC11Code>
<ProductNDC>0456-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linzess</ProprietaryName>
<NonProprietaryName>Linaclotide</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120908</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202811</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>LINACLOTIDE</SubstanceName>
<StrengthNumber>290</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Guanylate Cyclase Activators [MoA], Guanylate Cyclase-C Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120908</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>LINZESS is indicated for the treatment of. irritable bowel syndrome with constipation (IBS-C) in adults and pediatric patients 7 years of age and older. chronic idiopathic constipation (CIC) in adults. functional constipation (FC) in pediatric patients 2 years of age and older.</IndicationAndUsage>
<Description>LINZESS (linaclotide) is a guanylate cyclase-C (GC-C) agonist. Linaclotide is a 14-amino acid peptide with the following chemical name: L-cysteinyl-L-cysteinyl-L-glutamyl-L-tyrosyl-L-cysteinyl-L-cysteinyl-L-asparaginyl-L-prolyl-L-alanyl-L-cysteinyl-L-threonyl-glycyl-L-cysteinyl-L-tyrosine, cyclic (1-6), (2-10), (5-13)-tris (disulfide). The molecular formula of linaclotide is C59H79N15O21S6 and its molecular weight is 1526.8. The amino acid sequence for linaclotide is shown below. Linaclotide is an amorphous, white to off-white powder. It is slightly soluble in water and aqueous sodium chloride (0.9%). LINZESS contains linaclotide-coated beads in hard gelatin capsules. LINZESS is available as 72 mcg, 145 mcg and 290 mcg capsules for oral administration. The inactive ingredients of LINZESS 72 mcg capsules include: calcium chloride dihydrate, L-histidine, microcrystalline cellulose, polyvinyl alcohol, and talc. The components of the capsule shell include gelatin and titanium dioxide. The inactive ingredients of LINZESS 145 mcg and 290 mcg capsules include: calcium chloride dihydrate, hypromellose, L-leucine, and microcrystalline cellulose. The components of the capsule shell include gelatin and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-1202-07</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0456-1202-07) / 7 CAPSULE, GELATIN COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>00456-1202-07</NDC11Code>
<ProductNDC>0456-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linzess</ProprietaryName>
<NonProprietaryName>Linaclotide</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120908</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202811</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>LINACLOTIDE</SubstanceName>
<StrengthNumber>290</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Guanylate Cyclase Activators [MoA], Guanylate Cyclase-C Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190517</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>LINZESS is indicated for the treatment of. irritable bowel syndrome with constipation (IBS-C) in adults and pediatric patients 7 years of age and older. chronic idiopathic constipation (CIC) in adults. functional constipation (FC) in pediatric patients 2 years of age and older.</IndicationAndUsage>
<Description>LINZESS (linaclotide) is a guanylate cyclase-C (GC-C) agonist. Linaclotide is a 14-amino acid peptide with the following chemical name: L-cysteinyl-L-cysteinyl-L-glutamyl-L-tyrosyl-L-cysteinyl-L-cysteinyl-L-asparaginyl-L-prolyl-L-alanyl-L-cysteinyl-L-threonyl-glycyl-L-cysteinyl-L-tyrosine, cyclic (1-6), (2-10), (5-13)-tris (disulfide). The molecular formula of linaclotide is C59H79N15O21S6 and its molecular weight is 1526.8. The amino acid sequence for linaclotide is shown below. Linaclotide is an amorphous, white to off-white powder. It is slightly soluble in water and aqueous sodium chloride (0.9%). LINZESS contains linaclotide-coated beads in hard gelatin capsules. LINZESS is available as 72 mcg, 145 mcg and 290 mcg capsules for oral administration. The inactive ingredients of LINZESS 72 mcg capsules include: calcium chloride dihydrate, L-histidine, microcrystalline cellulose, polyvinyl alcohol, and talc. The components of the capsule shell include gelatin and titanium dioxide. The inactive ingredients of LINZESS 145 mcg and 290 mcg capsules include: calcium chloride dihydrate, hypromellose, L-leucine, and microcrystalline cellulose. The components of the capsule shell include gelatin and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-1202-30</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0456-1202-30) / 30 CAPSULE, GELATIN COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>00456-1202-30</NDC11Code>
<ProductNDC>0456-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linzess</ProprietaryName>
<NonProprietaryName>Linaclotide</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120908</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202811</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>LINACLOTIDE</SubstanceName>
<StrengthNumber>290</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Guanylate Cyclase Activators [MoA], Guanylate Cyclase-C Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120908</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LINZESS is indicated for the treatment of. irritable bowel syndrome with constipation (IBS-C) in adults and pediatric patients 7 years of age and older. chronic idiopathic constipation (CIC) in adults. functional constipation (FC) in pediatric patients 2 years of age and older.</IndicationAndUsage>
<Description>LINZESS (linaclotide) is a guanylate cyclase-C (GC-C) agonist. Linaclotide is a 14-amino acid peptide with the following chemical name: L-cysteinyl-L-cysteinyl-L-glutamyl-L-tyrosyl-L-cysteinyl-L-cysteinyl-L-asparaginyl-L-prolyl-L-alanyl-L-cysteinyl-L-threonyl-glycyl-L-cysteinyl-L-tyrosine, cyclic (1-6), (2-10), (5-13)-tris (disulfide). The molecular formula of linaclotide is C59H79N15O21S6 and its molecular weight is 1526.8. The amino acid sequence for linaclotide is shown below. Linaclotide is an amorphous, white to off-white powder. It is slightly soluble in water and aqueous sodium chloride (0.9%). LINZESS contains linaclotide-coated beads in hard gelatin capsules. LINZESS is available as 72 mcg, 145 mcg and 290 mcg capsules for oral administration. The inactive ingredients of LINZESS 72 mcg capsules include: calcium chloride dihydrate, L-histidine, microcrystalline cellulose, polyvinyl alcohol, and talc. The components of the capsule shell include gelatin and titanium dioxide. The inactive ingredients of LINZESS 145 mcg and 290 mcg capsules include: calcium chloride dihydrate, hypromellose, L-leucine, and microcrystalline cellulose. The components of the capsule shell include gelatin and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0480-4076-30</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (0480-4076-30) / 5 VIAL, SINGLE-DOSE in 1 POUCH / .4 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00480-4076-30</NDC11Code>
<ProductNDC>0480-4076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclosporine</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20251028</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203880</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclosporine ophthalmic emulsion is indicated to increase tear production in patients whose tear production is presumed to be suppressed due to ocular inflammation associated with keratoconjunctivitis sicca. Increased tear production was not seen in patients currently taking topical anti-inflammatory drugs or using punctal plugs.</IndicationAndUsage>
<Description>Cyclosporine ophthalmic emulsion, 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. C62H111N11O12 M.W. 1202.6. Cyclosporine, USP is a white or almost white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5 to 8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine, USP, 0.05%. Inactives: carbomer copolymer type A, castor oil, glycerin, polysorbate 80, water for injection and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0480-4076-60</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (0480-4076-60) / 5 VIAL, SINGLE-DOSE in 1 POUCH / .4 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00480-4076-60</NDC11Code>
<ProductNDC>0480-4076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclosporine</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20251028</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203880</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclosporine ophthalmic emulsion is indicated to increase tear production in patients whose tear production is presumed to be suppressed due to ocular inflammation associated with keratoconjunctivitis sicca. Increased tear production was not seen in patients currently taking topical anti-inflammatory drugs or using punctal plugs.</IndicationAndUsage>
<Description>Cyclosporine ophthalmic emulsion, 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. C62H111N11O12 M.W. 1202.6. Cyclosporine, USP is a white or almost white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5 to 8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine, USP, 0.05%. Inactives: carbomer copolymer type A, castor oil, glycerin, polysorbate 80, water for injection and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>12496-1202-3</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (12496-1202-3) / 1 FILM, SOLUBLE in 1 POUCH (12496-1202-1) </PackageDescription>
<NDC11Code>12496-1202-03</NDC11Code>
<ProductNDC>12496-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Suboxone</ProprietaryName>
<NonProprietaryName>Buprenorphine Hydrochloride, Naloxone Hydrochloride</NonProprietaryName>
<DosageFormName>FILM, SOLUBLE</DosageFormName>
<RouteName>BUCCAL; SUBLINGUAL</RouteName>
<StartMarketingDate>20100913</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022410</ApplicationNumber>
<LabelerName>INDIVIOR INC.</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2; .5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SUBOXONE sublingual film is indicated for treatment of opioid dependence. SUBOXONE sublingual film should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>SUBOXONE® (buprenorphine and naloxone) sublingual film is an orange film, imprinted with a logo identifying the product and strength in white ink. It contains buprenorphine HCl, a mu-opioid receptor partial agonist, and a kappa-opioid receptor antagonist, and naloxone HCl dihydrate, an opioid antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual or buccal administration and is available in four dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone, 4 mg buprenorphine with 1 mg naloxone, 8 mg buprenorphine with 2 mg naloxone and 12 mg buprenorphine with 3 mg naloxone. Each film also contains polyethylene oxide, hydroxypropyl methylcellulose, maltitol, acesulfame potassium, lime flavor, citric acid, sodium citrate, FD&C yellow #6, and white ink. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14- ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure. Buprenorphine HCl has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate is 17-Allyl-4,5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure. Naloxone hydrochloride dihydrate has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>13845-1202-2</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (13845-1202-2) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>13845-1202-02</NDC11Code>
<ProductNDC>13845-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cycloserine</ProprietaryName>
<NonProprietaryName>Cycloserine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060593</ApplicationNumber>
<LabelerName>Parsolex Gmp Center, Inc.</LabelerName>
<SubstanceName>CYCLOSERINE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cycloserine is indicated in the treatment of active pulmonary and extrapulmonary tuberculosis (including renal disease) when the causative organisms are susceptible to this drug and when treatment with the primary medications (streptomycin, isoniazid, rifampin, and ethambutol) has proved inadequate. Like all antituberculosis drugs, cycloserine should be administered in conjunction with other effective chemotherapy and not as the sole therapeutic agent. Cycloserine may be effective in the treatment of acute urinary tract infections caused by susceptible strains of gram-positive and gram- negative bacteria. Use of cycloserine in these infections should be considered only when more conventional therapy has failed and when the organism has been demonstrated to be susceptible to the drug.</IndicationAndUsage>
<Description>D -Cycloserine, (R)-4-amino-3-isoxazolidinone, is a broad-spectrum antibiotic that is produced by a strain of Streptomyces orchidaceus and has also been synthesized. Cycloserine is a white to off-white powder that is soluble in water and stable in alkaline solution. It is rapidly destroyed at a neutral or acid pH. Cycloserine has a pH between 5.5 and 6.5 in a solution containing 100 mg/mL. The molecular weight of cycloserine is 102.09, and it has an empirical formula of C 3H6N2O 2 . The structural formula of cycloserine is as follows:. Each capsule contains cycloserine, 250 mg (2.45 mmol); D & C Yellow No. 10, F D & C Blue No. 1, F D & C Red No. 3, F D & C Yellow No. 6, gelatin, iron oxide, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>22840-1202-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-1202-2) </PackageDescription>
<NDC11Code>22840-1202-02</NDC11Code>
<ProductNDC>22840-1202</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Bahia Grass</ProprietaryName>
<NonProprietaryName>Paspalum Notatum</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>PASPALUM NOTATUM POLLEN</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>22840-1202-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-1202-4) </PackageDescription>
<NDC11Code>22840-1202-04</NDC11Code>
<ProductNDC>22840-1202</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Bahia Grass</ProprietaryName>
<NonProprietaryName>Paspalum Notatum</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>PASPALUM NOTATUM POLLEN</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>47335-506-96</NDCCode>
<PackageDescription>6 POUCH in 1 BOX (47335-506-96) / 10 VIAL, SINGLE-DOSE in 1 POUCH / .25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>47335-0506-96</NDC11Code>
<ProductNDC>47335-506</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cequa</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC; TOPICAL</RouteName>
<StartMarketingDate>20180815</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210913</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>.0009</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CEQUA ophthalmic solution is a calcineurin inhibitor immunosuppressant indicated to increase tear production in patients with keratoconjunctivitis sicca (dry eye). (1).</IndicationAndUsage>
<Description>CEQUA (cyclosporine ophthalmic solution) 0.09% contains a topical calcineurin inhibitor immunosuppressant. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. Structural Formula. Formula: C62H111N11O12 Mol. Wt.: 1202.6. Cyclosporine is a white powder that is insoluble in water. CEQUA is supplied as a sterile, clear, colorless ophthalmic solution for topical ophthalmic use. It has an osmolality of 160 to 190 mOsmol/kg and a pH of 6.5-7.2. Each mL of CEQUA contains: : 1 Active: cyclosporine 0.09%, 2 Inactives: Polyoxyl 40 Hydrogenated Castor Oil, Octoxynol-40, polyvinylpyrrolidone, sodium phosphate monobasic dihydrate, sodium phosphate dibasic anhydrous, sodium chloride, water for injection, and sodium hydroxide or hydrochloric acid to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>47335-507-97</NDCCode>
<PackageDescription>1 POUCH in 1 BOX (47335-507-97) / 10 VIAL, SINGLE-DOSE in 1 POUCH / .25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>47335-0507-97</NDC11Code>
<ProductNDC>47335-507</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cequa</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC; TOPICAL</RouteName>
<StartMarketingDate>20180815</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210913</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>.0009</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180815</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>CEQUA ophthalmic solution is a calcineurin inhibitor immunosuppressant indicated to increase tear production in patients with keratoconjunctivitis sicca (dry eye). (1).</IndicationAndUsage>
<Description>CEQUA (cyclosporine ophthalmic solution) 0.09% contains a topical calcineurin inhibitor immunosuppressant. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. Structural Formula. Formula: C62H111N11O12 Mol. Wt.: 1202.6. Cyclosporine is a white powder that is insoluble in water. CEQUA is supplied as a sterile, clear, colorless ophthalmic solution for topical ophthalmic use. It has an osmolality of 160 to 190 mOsmol/kg and a pH of 6.5-7.2. Each mL of CEQUA contains: : 1 Active: cyclosporine 0.09%, 2 Inactives: Polyoxyl 40 Hydrogenated Castor Oil, Octoxynol-40, polyvinylpyrrolidone, sodium phosphate monobasic dihydrate, sodium phosphate dibasic anhydrous, sodium chloride, water for injection, and sodium hydroxide or hydrochloric acid to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>48951-1202-1</NDCCode>
<PackageDescription>10 AMPULE in 1 BOX (48951-1202-1) / 1 mL in 1 AMPULE</PackageDescription>
<NDC11Code>48951-1202-01</NDC11Code>
<ProductNDC>48951-1202</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aurum Prunus</ProprietaryName>
<NonProprietaryName>Aurum Prunus</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090901</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Uriel Pharmacy Inc.</LabelerName>
<SubstanceName>GOLD; SLOE</SubstanceName>
<StrengthNumber>10; 6</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Directions: FOR ORAL USE.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>53002-1202-0</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (53002-1202-0) </PackageDescription>
<NDC11Code>53002-1202-00</NDC11Code>
<ProductNDC>53002-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nortriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Nortriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074132</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>NORTRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nortriptyline hydrochloride capsules are indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Nortriptyline hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5-ylidene)-N-methyl-, hydrochloride. The structural formula is as follows. C19H21NHCl M.W. 299.84. Nortriptyline hydrochloride, USP is a white to off-white powder, having a slight, characteristic odor. It is soluble in water and in chloroform; sparingly soluble in methanol; and practically insoluble in most organic solvents. Each capsule, for oral administration, contains nortriptyline hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg or 75 mg nortriptyline. In addition, each capsule contains the following inactive ingredients: corn starch, dimethicone, gelatin, iron oxide black, potassium hydroxide, propylene glycol, shellac glaze, sodium lauryl sulfate, strong ammonia solution, and titanium dioxide. The 10 mg, 25 mg and 75 mg capsules also contain D&C yellow #10, FD&C blue #1, and FD&C yellow #6.</Description>
</NDC>
<NDC>
<NDCCode>53002-1202-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (53002-1202-3) </PackageDescription>
<NDC11Code>53002-1202-03</NDC11Code>
<ProductNDC>53002-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nortriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Nortriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074132</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>NORTRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nortriptyline hydrochloride capsules are indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Nortriptyline hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5-ylidene)-N-methyl-, hydrochloride. The structural formula is as follows. C19H21NHCl M.W. 299.84. Nortriptyline hydrochloride, USP is a white to off-white powder, having a slight, characteristic odor. It is soluble in water and in chloroform; sparingly soluble in methanol; and practically insoluble in most organic solvents. Each capsule, for oral administration, contains nortriptyline hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg or 75 mg nortriptyline. In addition, each capsule contains the following inactive ingredients: corn starch, dimethicone, gelatin, iron oxide black, potassium hydroxide, propylene glycol, shellac glaze, sodium lauryl sulfate, strong ammonia solution, and titanium dioxide. The 10 mg, 25 mg and 75 mg capsules also contain D&C yellow #10, FD&C blue #1, and FD&C yellow #6.</Description>
</NDC>
<NDC>
<NDCCode>60505-0133-0</NDCCode>
<PackageDescription>30 CAPSULE, GELATIN COATED in 1 BOTTLE (60505-0133-0) </PackageDescription>
<NDC11Code>60505-0133-00</NDC11Code>
<ProductNDC>60505-0133</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclosporine</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065040</ApplicationNumber>
<LabelerName>Apotex Corp.</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclosporine capsules, (NON-MODIFIED), in combination with adrenal corticosteroids, are indicated for the: 1 Prophylaxis of organ rejection in kidney, liver, and heart allogeneic transplants., 2 Treatment of chronic rejection in patients previously treated with other immunosuppressive agents.</IndicationAndUsage>
<Description>Cyclosporine, USP, the active principle in cyclosporine capsules, USP (NON-MODIFIED) is a cyclic polypeptide immunosuppressant agent consisting of 11 amino acids. It is produced as a metabolite by the fungus species Tolypocladium inflatum Gams. Chemically, cyclosporine is designated as [R-[R*,R*-(E)]]-cyclic(L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl-3-hydroxy-N,4-dimethyl-L-2-amino-6-octenoyl-L-α-amino-butyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl). The chemical structure of cyclosporine (also known as cyclosporin A) is:. C62H111N11O12 Mol. wt. 1202.61. Cyclosporine capsules, USP (NON-MODIFIED) are available in 25 mg and 100 mg strengths. Each 25 mg capsule contains:Cyclosporine, USP……………………………………………………………………...25 mg. Each 100 mg capsule contains:Cyclosporine, USP……………………………………………………..……………...100 mg. Each capsule contains the following inactive ingredients: methanol, sodium lauryl sulfate and talc. The 25 mg and the 100 mg capsule shell contains gelatin, red iron oxide and titanium dioxide. The 25 mg and 100 mg capsule black imprinting ink contains the following inactive ingredients: n-butyl alcohol, D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C blue #2 aluminum lake, FD&C red #40 aluminum lake, pharmaceutical glaze, propylene glycol, SDA-3A alcohol and synthetic black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>60505-0134-0</NDCCode>
<PackageDescription>30 CAPSULE, GELATIN COATED in 1 BOTTLE (60505-0134-0) </PackageDescription>
<NDC11Code>60505-0134-00</NDC11Code>
<ProductNDC>60505-0134</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclosporine</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065040</ApplicationNumber>
<LabelerName>Apotex Corp.</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclosporine capsules, (NON-MODIFIED), in combination with adrenal corticosteroids, are indicated for the: 1 Prophylaxis of organ rejection in kidney, liver, and heart allogeneic transplants., 2 Treatment of chronic rejection in patients previously treated with other immunosuppressive agents.</IndicationAndUsage>
<Description>Cyclosporine, USP, the active principle in cyclosporine capsules, USP (NON-MODIFIED) is a cyclic polypeptide immunosuppressant agent consisting of 11 amino acids. It is produced as a metabolite by the fungus species Tolypocladium inflatum Gams. Chemically, cyclosporine is designated as [R-[R*,R*-(E)]]-cyclic(L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl-3-hydroxy-N,4-dimethyl-L-2-amino-6-octenoyl-L-α-amino-butyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl). The chemical structure of cyclosporine (also known as cyclosporin A) is:. C62H111N11O12 Mol. wt. 1202.61. Cyclosporine capsules, USP (NON-MODIFIED) are available in 25 mg and 100 mg strengths. Each 25 mg capsule contains:Cyclosporine, USP……………………………………………………………………...25 mg. Each 100 mg capsule contains:Cyclosporine, USP……………………………………………………..……………...100 mg. Each capsule contains the following inactive ingredients: methanol, sodium lauryl sulfate and talc. The 25 mg and the 100 mg capsule shell contains gelatin, red iron oxide and titanium dioxide. The 25 mg and 100 mg capsule black imprinting ink contains the following inactive ingredients: n-butyl alcohol, D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C blue #2 aluminum lake, FD&C red #40 aluminum lake, pharmaceutical glaze, propylene glycol, SDA-3A alcohol and synthetic black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>60505-6202-1</NDCCode>
<PackageDescription>30 VIAL in 1 TRAY (60505-6202-1) / .4 mL in 1 VIAL</PackageDescription>
<NDC11Code>60505-6202-01</NDC11Code>
<ProductNDC>60505-6202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclosporine</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20220207</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA050790</ApplicationNumber>
<LabelerName>Apotex Corp</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclosporine ophthalmic emulsion, 0.05% is indicated to increase tear production in patients whose tear production is presumed to be suppressed due to ocular inflammation associated with keratoconjunctivitis sicca. Increased tear production was not seen in patients currently taking topical anti-inflammatory drugs or using punctal plugs.</IndicationAndUsage>
<Description>Cyclosporine ophthalmic emulsion, 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. Structural Formula. Formula: C62H111N11O12 Mol. Wt.: 1202.6. Cyclosporine is a fine white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5-8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine 0.05%. Inactives: glycerin; castor oil; polysorbate 80; carbomer copolymer type A; purified water; and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>60505-6202-2</NDCCode>
<PackageDescription>60 VIAL in 1 TRAY (60505-6202-2) / .4 mL in 1 VIAL</PackageDescription>
<NDC11Code>60505-6202-02</NDC11Code>
<ProductNDC>60505-6202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclosporine</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20220207</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA050790</ApplicationNumber>
<LabelerName>Apotex Corp</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclosporine ophthalmic emulsion, 0.05% is indicated to increase tear production in patients whose tear production is presumed to be suppressed due to ocular inflammation associated with keratoconjunctivitis sicca. Increased tear production was not seen in patients currently taking topical anti-inflammatory drugs or using punctal plugs.</IndicationAndUsage>
<Description>Cyclosporine ophthalmic emulsion, 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s chemical name is Cyclo[[(E)-(2S,3R,4R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl-N-methylglycyl-N-methyl-L-leucyl-L-valyl-N-methyl-L-leucyl-L-alanyl-D-alanyl-N-methyl-L-leucyl-N-methyl-L-leucyl-N-methyl-L-valyl] and it has the following structure. Structural Formula. Formula: C62H111N11O12 Mol. Wt.: 1202.6. Cyclosporine is a fine white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5-8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine 0.05%. Inactives: glycerin; castor oil; polysorbate 80; carbomer copolymer type A; purified water; and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>62106-1202-0</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (62106-1202-0) > 30 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>62106-1202-00</NDC11Code>
<ProductNDC>62106-1202</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kalium Carbonicum Plex</ProprietaryName>
<NonProprietaryName>Asafoetida, Carbo Vegetabilis, Cinchona Succirubra, Kali Carbonicum, Lycopodium Clavatum, Nux Moschata, Nux Vomica, Raphanus Sativus Var Niger</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20151216</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Seroyal USA</LabelerName>
<SubstanceName>ASAFETIDA; ACTIVATED CHARCOAL; CINCHONA PUBESCENS BARK; NUTMEG; POTASSIUM CARBONATE; LYCOPODIUM CLAVATUM SPORE; STRYCHNOS NUX-VOMICA SEED; RAPHANUS SATIVUS</SubstanceName>
<StrengthNumber>6; 6; 6; 6; 6; 6; 6; 6</StrengthNumber>
<StrengthUnit>[hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Dietary Proteins [CS], Food Additives [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Plant Proteins [CS], Seed Storage Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses. For the temporary relief of symptoms associated with digestive upset such as: Bloating. Indigestion. Colic. Directions To be taken ten minutes away from food. Invert bottle and shake lightly allowing drops to fall directly under the tongue or into ¼ oz of water. Hold contents for about 20 seconds and swallow. To promote drop flow, invert bottle and shake before each use. Dosage frequency may be increased up to six times daily depending on the severity of symptoms. Adults and adolescents (12 years and older). Take 10 drops three times daily or as recommended by your healthcare practitioner. Children (under 12 years). Take under the direction of your healthcare practitioner.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65086-001-05</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (65086-001-05) / 5 VIAL, SINGLE-DOSE in 1 POUCH / .3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>65086-0001-05</NDC11Code>
<ProductNDC>65086-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verkazia</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>OPHTHALMIC; TOPICAL</RouteName>
<StartMarketingDate>20220201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA214965</ApplicationNumber>
<LabelerName>Santen Incorporated</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220201</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Verkazia ophthalmic emulsion is indicated for the treatment of vernal keratoconjunctivitis (VKC) in children and adults.</IndicationAndUsage>
<Description>Verkazia (cyclosporine ophthalmic emulsion) 0.1% contains a topical calcineurin inhibitor immunosuppressant. Cyclosporine is a white or almost white powder. Cyclosporine’s chemical name is Cyclo[[( E)-(2 S,3 R,4 R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl- N-methylglycyl- N-methyl-L-leucyl-L-valyl- N-methyl-L-leucyl-L-alanyl-D-alanyl- N-methyl-L-leucyl- N-methyl-L-leucyl- N-methyl-L-valyl] and it has the following structure:. Structural Formula. Formula: C 62H 111N 11O 12 Mol. Wt.: 1202.61. Verkazia ophthalmic emulsion is a sterile, unpreserved topical emulsion. It appears as a milky-white homogeneous emulsion. It has an osmolality of approximately 265 mOsmol/kg and a pH of 5-7. Each mL of Verkazia ophthalmic emulsion contains: Active: Cyclosporine 1 mg/mL. Inactives: Cetalkonium chloride, Glycerol, Medium-chain triglycerides, Poloxamer 188, Sodium Hydroxide to adjust pH, Tyloxapol and Water for Injection.</Description>
</NDC>
<NDC>
<NDCCode>65086-001-12</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (65086-001-12) / 5 VIAL, SINGLE-DOSE in 1 POUCH / .3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>65086-0001-12</NDC11Code>
<ProductNDC>65086-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verkazia</ProprietaryName>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>OPHTHALMIC; TOPICAL</RouteName>
<StartMarketingDate>20220201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA214965</ApplicationNumber>
<LabelerName>Santen Incorporated</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verkazia ophthalmic emulsion is indicated for the treatment of vernal keratoconjunctivitis (VKC) in children and adults.</IndicationAndUsage>
<Description>Verkazia (cyclosporine ophthalmic emulsion) 0.1% contains a topical calcineurin inhibitor immunosuppressant. Cyclosporine is a white or almost white powder. Cyclosporine’s chemical name is Cyclo[[( E)-(2 S,3 R,4 R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl- N-methylglycyl- N-methyl-L-leucyl-L-valyl- N-methyl-L-leucyl-L-alanyl-D-alanyl- N-methyl-L-leucyl- N-methyl-L-leucyl- N-methyl-L-valyl] and it has the following structure:. Structural Formula. Formula: C 62H 111N 11O 12 Mol. Wt.: 1202.61. Verkazia ophthalmic emulsion is a sterile, unpreserved topical emulsion. It appears as a milky-white homogeneous emulsion. It has an osmolality of approximately 265 mOsmol/kg and a pH of 5-7. Each mL of Verkazia ophthalmic emulsion contains: Active: Cyclosporine 1 mg/mL. Inactives: Cetalkonium chloride, Glycerol, Medium-chain triglycerides, Poloxamer 188, Sodium Hydroxide to adjust pH, Tyloxapol and Water for Injection.</Description>
</NDC>
<NDC>
<NDCCode>67046-1202-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-1202-3) </PackageDescription>
<NDC11Code>67046-1202-03</NDC11Code>
<ProductNDC>67046-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090162</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topiramate tablets are indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older ( 1.2) , 2 Preventive treatment of migraine in patients 12 years of age and older ( 1.3) .</IndicationAndUsage>
<Description>Topiramate, USP is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round shaped tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate, USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate, USP has the molecular formula C 12H 21NO 8S and a molecular weight of 339.36. Topiramate, USP is designated chemically as 2,3:4,5-Di- O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: lactose monohydrate, pregelatinized corn starch, microcrystalline cellulose, sodium starch glycolate Type A (Potato), magnesium stearate, hypromellose, polysorbate 80, polyethylene glycol, and titanium dioxide. In addition the 25 mg, 100 mg and 200 mg tablets also contain yellow iron oxide; the 25 mg and 100 mg tablets also contain red iron oxide.</Description>
</NDC>
</NDCList>