{
"NDC": [
{
"NDCCode": "67296-1208-7",
"PackageDescription": "5 TABLET, FILM COATED in 1 BOTTLE (67296-1208-7) ",
"NDC11Code": "67296-1208-07",
"ProductNDC": "67296-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077797",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20070228",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [This is an image of the structural formula for cyclobenzaprine.]. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate."
},
{
"NDCCode": "71335-1208-3",
"PackageDescription": "7 TABLET, FILM COATED in 1 BOTTLE (71335-1208-3) ",
"NDC11Code": "71335-1208-03",
"ProductNDC": "71335-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120322",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200839",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220209",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).",
"Description": "Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80."
},
{
"NDCCode": "71335-1208-7",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (71335-1208-7) ",
"NDC11Code": "71335-1208-07",
"ProductNDC": "71335-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120322",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200839",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220209",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).",
"Description": "Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80."
},
{
"NDCCode": "67296-1208-1",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (67296-1208-1) ",
"NDC11Code": "67296-1208-01",
"ProductNDC": "67296-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077797",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20070228",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [This is an image of the structural formula for cyclobenzaprine.]. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate."
},
{
"NDCCode": "67296-1208-2",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (67296-1208-2) ",
"NDC11Code": "67296-1208-02",
"ProductNDC": "67296-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077797",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20070228",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [This is an image of the structural formula for cyclobenzaprine.]. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate."
},
{
"NDCCode": "67296-1208-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (67296-1208-3) ",
"NDC11Code": "67296-1208-03",
"ProductNDC": "67296-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077797",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20070228",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [This is an image of the structural formula for cyclobenzaprine.]. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate."
},
{
"NDCCode": "67296-1208-5",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE (67296-1208-5) ",
"NDC11Code": "67296-1208-05",
"ProductNDC": "67296-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077797",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20070228",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [This is an image of the structural formula for cyclobenzaprine.]. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate."
},
{
"NDCCode": "0409-1208-01",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (0409-1208-01) / 10 mL in 1 VIAL, MULTI-DOSE (0409-1208-11) ",
"NDC11Code": "00409-1208-01",
"ProductNDC": "0409-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cisatracurium Besylate",
"NonProprietaryName": "Cisatracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203238",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "CISATRACURIUM BESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200324",
"SamplePackage": "N",
"IndicationAndUsage": "Cisatracurium Besylate Injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.",
"Description": "Cisatracurium besylate is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.5. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution provided in 5 mL, 10 mL, and 20 mL vials. The pH is adjusted to 3.0 to 3.8 with benzenesulfonic acid. : 1 The 5 mL single-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate., 2 The 10 mL multiple-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate, and 0.9% benzyl alcohol as a preservative., 3 The 20 mL single-dose vials contain 10 mg/mL cisatracurium, equivalent to 13.38 mg/mL cisatracurium besylate."
},
{
"NDCCode": "0456-1208-00",
"PackageDescription": "1 BAG in 1 DRUM (0456-1208-00) / 25000 CAPSULE in 1 BAG",
"NDC11Code": "00456-1208-00",
"ProductNDC": "0456-1208",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Memantine Hydrochloride And Donepezil Hydrochloride",
"DosageFormName": "CAPSULE",
"StartMarketingDate": "20160718",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE; MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "10; 7",
"StrengthUnit": "mg/1; mg/1",
"Status": "Unfinished",
"LastUpdate": "2025-12-19",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "18-JUL-16"
},
{
"NDCCode": "70710-1208-1",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (70710-1208-1) / 1.2 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "70710-1208-01",
"ProductNDC": "70710-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Plerixafor",
"NonProprietaryName": "Plerixafor",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20230728",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208980",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "PLERIXAFOR",
"StrengthNumber": "24",
"StrengthUnit": "mg/1.2mL",
"Pharm_Classes": "Hematopoietic Stem Cell Mobilizer [EPC], Increased Hematopoietic Stem Cell Mobilization [PE]",
"Status": "Active",
"LastUpdate": "2024-12-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230728",
"SamplePackage": "N",
"IndicationAndUsage": "Plerixafor injection, a hematopoietic stem cell mobilizer, is indicated in combination with filgrastim to mobilize hematopoietic stem cells (HSCs) to the peripheral blood for collection and subsequent autologous transplantation in patients with non-Hodgkin's lymphoma or multiple myeloma. (1).",
"Description": "Plerixafor Injection is a sterile, preservative-free, clear, colorless to pale-yellow, isotonic solution for subcutaneous injection. Each mL of the sterile solution contains 20 mg of plerixafor. Each single-dose vial is filled to deliver 1.2 mL of the sterile solution that contains 24 mg of plerixafor and 5.9 mg of sodium chloride in Water for Injection adjusted to a pH of 6.0 to 7.5 with hydrochloric acid and with sodium hydroxide, if required. Plerixafor is a hematopoietic stem cell mobilizer with a chemical name 1,4-Bis ((1,4,8,11-tetraazacyclotetradecan-1-yl) methyl) benzene. It has the molecular formula C28H54N8. The molecular weight of plerixafor is 502.79 g/mol. The structural formula is provided in Figure 1. Plerixafor is a white to off-white crystalline solid. It is hygroscopic. Plerixafor has a typical melting point of 131.5°C. The partition coefficient of plerixafor between 1-octanol and pH 7 aqueous buffer is < 0.1."
},
{
"NDCCode": "71335-1208-1",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (71335-1208-1) ",
"NDC11Code": "71335-1208-01",
"ProductNDC": "71335-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120322",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200839",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220209",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).",
"Description": "Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80."
},
{
"NDCCode": "71335-1208-2",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (71335-1208-2) ",
"NDC11Code": "71335-1208-02",
"ProductNDC": "71335-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120322",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200839",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220209",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).",
"Description": "Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80."
},
{
"NDCCode": "71335-1208-4",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (71335-1208-4) ",
"NDC11Code": "71335-1208-04",
"ProductNDC": "71335-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120322",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200839",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220209",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).",
"Description": "Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80."
},
{
"NDCCode": "71335-1208-5",
"PackageDescription": "5 TABLET, FILM COATED in 1 BOTTLE (71335-1208-5) ",
"NDC11Code": "71335-1208-05",
"ProductNDC": "71335-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120322",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200839",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220209",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).",
"Description": "Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80."
},
{
"NDCCode": "71335-1208-6",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (71335-1208-6) ",
"NDC11Code": "71335-1208-06",
"ProductNDC": "71335-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120322",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200839",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220209",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).",
"Description": "Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80."
},
{
"NDCCode": "71335-1208-8",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (71335-1208-8) ",
"NDC11Code": "71335-1208-08",
"ProductNDC": "71335-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120322",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200839",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220209",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).",
"Description": "Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80."
},
{
"NDCCode": "71335-1208-9",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71335-1208-9) ",
"NDC11Code": "71335-1208-09",
"ProductNDC": "71335-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120322",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200839",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220209",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).",
"Description": "Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80."
},
{
"NDCCode": "67296-0029-7",
"PackageDescription": "14 TABLET, DELAYED RELEASE in 1 BOTTLE (67296-0029-7) ",
"NDC11Code": "67296-0029-07",
"ProductNDC": "67296-0029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Protonix",
"ProprietaryNameSuffix": "Delayed-release",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20000501",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020987",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20000501",
"SamplePackage": "N",
"IndicationAndUsage": "PROTONIX is a proton pump inhibitor (PPI) indicated for the following. Short-Term Treatment of Erosive Esophagitis Associated with Gastroesophageal Reflux Disease (GERD) ( 1.1) Maintenance of Healing of Erosive Esophagitis ( 1.2) Pathological Hypersecretory Conditions Including Zollinger-Ellison (ZE) Syndrome ( 1.3). PROTONIX For Delayed-Release Oral Suspension and PROTONIX Delayed-Release Tablets are indicated for.",
"Description": "The active ingredient in PROTONIX (pantoprazole sodium) For Delayed-Release Oral Suspension and PROTONIX (pantoprazole sodium) Delayed-Release Tablets, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1 H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S × 1.5 H 2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium sesquihydrate is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium sesquihydrate is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. PROTONIX is supplied as a for delayed-release oral suspension in unit dose packets, available in one strength 40 mg pantoprazole, (equivalent to 45.1 mg of pantoprazole sodium), and as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.56 mg of pantoprazole sodium) and 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium). PROTONIX Delayed-Release Tablets contains the following inactive ingredients: calcium stearate, crospovidone, hypromellose, iron oxide, mannitol, methacrylic acid copolymer, polysorbate 80, povidone, propylene glycol, sodium carbonate, sodium lauryl sulfate, titanium dioxide, and triethyl citrate. PROTONIX Delayed-Release Tablets (40 mg and 20 mg) complies with USP dissolution test 2. PROTONIX For Delayed-Release Oral Suspension contains the following inactive ingredients: crospovidone, hypromellose, methacrylic acid copolymer, microcrystalline cellulose, polysorbate 80, povidone, sodium carbonate, sodium lauryl sulfate, talc, titanium dioxide, triethyl citrate, and yellow ferric oxide."
},
{
"NDCCode": "67296-0037-7",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (67296-0037-7) ",
"NDC11Code": "67296-0037-07",
"ProductNDC": "67296-0037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062702",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N",
"IndicationAndUsage": "Indications and Usage.",
"Description": "Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin, USP has the following structural formula. C 16H 17N 3O 4SH 2O M.W. 365.41. The nucleus of cephalexin, USP is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin, USP in water is approximately 4.5 to 5. The crystalline form of cephalexin, USP which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin, USP has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: CAPSULES: magnesium stearate, silicon dioxide, and sodium starch glycolate. Capsule Shell and Print Constituents: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze modified in SD-45, silicon dioxide or carboxymethylcellulose sodium, sodium lauryl sulfate, titanium dioxide and may contain propylene glycol. In addition, the 250 mg capsule shell contains yellow iron oxide. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate, USP equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: SUSPENSION: FD&C Red #40, cherry mixed fruit flavor (artificial flavors, benzyl alcohol, maltodextrin, and modified corn starch), silicon dioxide, sodium benzoate, sugar (fruit granulated), and xanthan gum. Each tablet contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: TABLETS: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "67296-0126-7",
"PackageDescription": "15 TABLET in 1 BOTTLE (67296-0126-7) ",
"NDC11Code": "67296-0126-07",
"ProductNDC": "67296-0126",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dicyclomine Hydrochloride",
"NonProprietaryName": "Dicyclomine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085223",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "DICYCLOMINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20120101",
"SamplePackage": "N",
"IndicationAndUsage": "Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.",
"Description": "Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage forms. Dicyclomine hydrochloride capsules for oral use contain 10 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 10 mg capsules also contain inactive ingredients: sodium lauryl sulfate, D&C Red #28, FD&C Blue #1, FD&C Red #40, gelatin, magnesium stearate, pregelatinized starch, silicon dioxide. Dicyclomine hydrochloride tablets for oral use contain 20 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 20 mg tablets also contain inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue #1, hypromellose, lactose monohydrate, sodium starch glycolate, and stearic acid. Dicyclomine hydrochloride is [bicyclohexyl]-1-carboxylic acid, 2-(diethylamino) ethyl ester, hydrochloride, with a molecular formula of C19H35NO2HCl and the following structural formula. [Dicyclomine Hydrochloride structural formula]. Molecular weight: 345.95. Dicyclomine hydrochloride occurs as a fine, white, crystalline, practically odorless powder with a bitter taste. It is soluble in water, freely soluble in alcohol and chloroform, and very slightly soluble in ether."
},
{
"NDCCode": "67296-0154-2",
"PackageDescription": "7 TABLET, FILM COATED in 1 BOTTLE (67296-0154-2)",
"NDC11Code": "67296-0154-02",
"ProductNDC": "67296-0154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Avelox",
"NonProprietaryName": "Moxifloxacin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110225",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021085",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "MOXIFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of AVELOX and other antibacterial drugs, AVELOX should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. AVELOX Tablets and IV are indicated for the treatment of adults (≥ 18 years of age) with infections caused by susceptible strains of the designated microorganisms in the conditions listed below [see Dosage and Administration (2) and Use In Specific Populations (8.5)]. Culture and Susceptibility Testing. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to moxifloxacin [see Clinical Pharmacology (12.4)]. Therapy with AVELOX may be initiated before results of these tests are known; once results become available, appropriate therapy should be continued.",
"Description": "AVELOX (moxifloxacin hydrochloride) is a synthetic broad spectrum antibacterial agent for oral and intravenous administration. Moxifloxacin, a fluoroquinolone, is available as the monohydrochloride salt of 1-cyclopropyl-7-[(S,S)-2,8-diazabicyclo[4.3.0]non-8-yl]-6-fluoro-8-methoxy-1,4-dihydro-4-oxo-3 quinoline carboxylic acid. It is a slightly yellow to yellow crystalline substance with a molecular weight of 437.9. Its empirical formula is C21H24FN3O4*HCl and its chemical structure is as follows."
},
{
"NDCCode": "67296-0299-7",
"PackageDescription": "4 TABLET in 1 BOTTLE (67296-0299-7) ",
"NDC11Code": "67296-0299-07",
"ProductNDC": "67296-0299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040736",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "ACETAMINOPHEN; HYDROCODONE BITARTRATE",
"StrengthNumber": "325; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100118",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets, USP are indicated for the relief of moderate to moderately severe pain.",
"Description": "Hydrocodone Bitartrate and Acetaminophen Tablets, USP are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. [This is an image of the structural formula of Hydrocodone bitartrate.]. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. [This is an image of the structural formula of Acetaminophen.]. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP contains. Hydrocodone Bitartrate, USP ........................... 5 mg. Acetaminophen, USP .................................... 325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. Meets USP Dissolution Test 1."
},
{
"NDCCode": "67296-0320-7",
"PackageDescription": "15 CAPSULE in 1 BOTTLE (67296-0320-7)",
"NDC11Code": "67296-0320-07",
"ProductNDC": "67296-0320",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20051201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065229",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cephalexin Capsules, USP is indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms: 1 Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin Capsules, USP is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of Cephalexin Capsules, USP in the subsequent prevention of rheumatic fever are not available at present.) , 2 Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphyloccus aureus, Streptococcus pyogenes, and Moraxella catarrhalis, 3 Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes , 4 Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis, 5 Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae.",
"Description": "Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7- (D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C16H17N3O4S H2O and the molecular weight is 365.41. Cephalexin has the following structural formula. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin USP equivalent to 250 mg or 500 mg of anhydrous cephalexin. The capsules also contain the following inactive ingredients D and C Yellow 10, edible printing ink with black iron oxide, FD and C Blue 1, FD and C Green 3, FD and C Yellow 6, gelatin, magnesium stearate, microcrystalline cellulose and titanium dioxide."
},
{
"NDCCode": "67296-0355-7",
"PackageDescription": "60 TABLET in 1 BOTTLE (67296-0355-7) ",
"NDC11Code": "67296-0355-07",
"ProductNDC": "67296-0355",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110308",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087463",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "325; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20110308",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and acetaminophen tablets USP are indicated for the relief of moderate to moderately severe pain.",
"Description": "Each tablet, for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths. Oxycodone Hydrochloride USP ..........................................................................5 mg* Acetaminophen USP ........................................................................................325 mg *5 mg oxycodone HCl is equivalent to 4.4815 mg of oxycodone. Oxycodone Hydrochloride USP .......................................................................7.5 mg* Acetaminophen USP ........................................................................................325 mg *7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone. Oxycodone Hydrochloride USP .........................................................................10 mg* Acetaminophen USP .........................................................................................325 mg *10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone. All strengths of oxycodone and acetaminophen tablets USP also contain the following inactive ingredients: crospovidone, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide and stearic acid. Oxycodone, 4,5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride, is a semisynthetic opioid analgesic which occurs as a white, odorless, crystalline powder having a saline, bitter taste. It is derived from the opium alkaloid thebaine. Oxycodone hydrochloride may be represented by the following structural formula. [Oxycodone Chemical Structure]. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. It may be represented by the following structural formula. [Acetaminophen Chemical Structure]."
},
{
"NDCCode": "67296-0372-2",
"PackageDescription": "7 TABLET, FILM COATED in 1 BOTTLE (67296-0372-2)",
"NDC11Code": "67296-0372-02",
"ProductNDC": "67296-0372",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levaquin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19961220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020634",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of LEVAQUIN® and other antibacterial drugs, LEVAQUIN® should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. LEVAQUIN® Tablets/Injection and Oral Solution are indicated for the treatment of adults (≥18 years of age) with mild, moderate, and severe infections caused by susceptible strains of the designated microorganisms in the conditions listed in this section. LEVAQUIN® Injection is indicated when intravenous administration offers a route of administration advantageous to the patient (e.g., patient cannot tolerate an oral dosage form).",
"Description": "LEVAQUIN® is a synthetic broad-spectrum antibacterial agent for oral and intravenous administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4 ½ H2O and the molecular weight is 370.38. Levofloxacin is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2."
},
{
"NDCCode": "67296-0406-7",
"PackageDescription": "14 TABLET in 1 BOTTLE (67296-0406-7) ",
"NDC11Code": "67296-0406-07",
"ProductNDC": "67296-0406",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naproxen",
"NonProprietaryName": "Naproxen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078250",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "NAPROXEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20070701",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of naproxen, naproxen sodium and other treatment options before deciding to use naproxen tablets or naproxen sodium tablets. Use the lowest effective dosage for the shortest duration consistent with individual patient treatment goals (see WARNINGS: GASTROINTESTINAL BLEEDING, ULCERATION, AND PERFORATION). Naproxen as naproxen tablets or naproxen sodium tablets are indicated. For the relief of the signs and symptoms of rheumatoid arthritis For the relief of the signs and symptoms of osteoarthritis For the relief of the signs and symptoms of ankylosing spondylitis For the relief of the signs and symptoms of juvenile arthritis. Naproxen as naproxen tablets or naproxen sodium tablets are also indicated. For relief of the signs and symptoms of tendonitis For relief of the signs and symptoms of bursitis For relief of the signs and symptoms of acute gout For the management of pain For the management of primary dysmenorrhea.",
"Description": "Naproxen USP is a propionic acid derivative related to the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical names for naproxen USP and naproxen sodium USP are (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid and (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid, sodium salt, respectively. Naproxen USP and naproxen sodium USP have the following structures, respectively. [chemical-structure]. Naproxen USP has a molecular weight of 230.26 and a molecular formula of C14H14O3. Naproxen sodium USP has a molecular weight of 252.23 and a molecular formula of C14H13NaO3. Naproxen USP is an odorless, white to off-white crystalline substance. It is lipid-soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen at pH 7.4 is 1.6 to 1.8. Naproxen sodium USP is a white to creamy white, crystalline solid, freely soluble in water at neutral pH. Naproxen tablets USP are available as light orange colored tablets containing 250 mg of naproxen USP, light orange colored tablets containing 375 mg of naproxen USP and light orange colored tablets containing 500 mg of naproxen USP for oral administration. The inactive ingredients are microcrystalline cellulose, croscarmellose sodium, iron oxide red, iron oxide yellow, povidone and magnesium stearate. Naproxen sodium tablets USP are available as blue tablets containing 275 mg of naproxen sodium USP and as blue tablets containing 550 mg of naproxen sodium USP for oral administration. The inactive ingredients are croscarmellose sodium, colloidal silicon dioxide, povidone, magnesium stearate, microcrystalline cellulose and talc. The coating suspension for the naproxen sodium 275 mg and 550 mg tablet contains hypromellose, titanium dioxide, polyethylene glycol, FD&C blue#2, and iron oxide red."
},
{
"NDCCode": "67296-0466-7",
"PackageDescription": "6 TABLET in 1 BOTTLE (67296-0466-7)",
"NDC11Code": "67296-0466-07",
"ProductNDC": "67296-0466",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040729",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "5; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2018-11-22",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "67296-0470-7",
"PackageDescription": "6 TABLET in 1 BOTTLE (67296-0470-7)",
"NDC11Code": "67296-0470-07",
"ProductNDC": "67296-0470",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19981202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089971",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "5; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Hydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each tablet contains. Hydrocodone Bitartrate ............. 5 mg Acetaminophen ......................... 500 mg. In addition each tablet contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. Meets USP Dissolution Test 1."
},
{
"NDCCode": "67296-0569-7",
"PackageDescription": "14 TABLET, EXTENDED RELEASE in 1 BOTTLE (67296-0569-7) ",
"NDC11Code": "67296-0569-07",
"ProductNDC": "67296-0569",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mucinex",
"NonProprietaryName": "Guaifenesin",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120703",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021282",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "GUAIFENESIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20120703",
"SamplePackage": "N",
"IndicationAndUsage": "helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive."
},
{
"NDCCode": "67296-0584-2",
"PackageDescription": "7 TABLET, FILM COATED in 1 BOTTLE (67296-0584-2)",
"NDC11Code": "67296-0584-02",
"ProductNDC": "67296-0584",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levaquin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19961220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020634",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of LEVAQUIN® and other antibacterial drugs, LEVAQUIN® should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. LEVAQUIN® Tablets/Injection and Oral Solution are indicated for the treatment of adults (≥18 years of age) with mild, moderate, and severe infections caused by susceptible strains of the designated microorganisms in the conditions listed in this section. LEVAQUIN® Injection is indicated when intravenous administration offers a route of administration advantageous to the patient (e.g., patient cannot tolerate an oral dosage form).",
"Description": "LEVAQUIN® is a synthetic broad-spectrum antibacterial agent for oral and intravenous administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4 ½ H2O and the molecular weight is 370.38. Levofloxacin is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67296-1208-7</NDCCode>
<PackageDescription>5 TABLET, FILM COATED in 1 BOTTLE (67296-1208-7) </PackageDescription>
<NDC11Code>67296-1208-07</NDC11Code>
<ProductNDC>67296-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077797</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [This is an image of the structural formula for cyclobenzaprine.]. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate.</Description>
</NDC>
<NDC>
<NDCCode>71335-1208-3</NDCCode>
<PackageDescription>7 TABLET, FILM COATED in 1 BOTTLE (71335-1208-3) </PackageDescription>
<NDC11Code>71335-1208-03</NDC11Code>
<ProductNDC>71335-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120322</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200839</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).</IndicationAndUsage>
<Description>Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>71335-1208-7</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (71335-1208-7) </PackageDescription>
<NDC11Code>71335-1208-07</NDC11Code>
<ProductNDC>71335-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120322</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200839</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).</IndicationAndUsage>
<Description>Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>67296-1208-1</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (67296-1208-1) </PackageDescription>
<NDC11Code>67296-1208-01</NDC11Code>
<ProductNDC>67296-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077797</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [This is an image of the structural formula for cyclobenzaprine.]. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate.</Description>
</NDC>
<NDC>
<NDCCode>67296-1208-2</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (67296-1208-2) </PackageDescription>
<NDC11Code>67296-1208-02</NDC11Code>
<ProductNDC>67296-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077797</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [This is an image of the structural formula for cyclobenzaprine.]. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate.</Description>
</NDC>
<NDC>
<NDCCode>67296-1208-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (67296-1208-3) </PackageDescription>
<NDC11Code>67296-1208-03</NDC11Code>
<ProductNDC>67296-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077797</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [This is an image of the structural formula for cyclobenzaprine.]. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate.</Description>
</NDC>
<NDC>
<NDCCode>67296-1208-5</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (67296-1208-5) </PackageDescription>
<NDC11Code>67296-1208-05</NDC11Code>
<ProductNDC>67296-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077797</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [This is an image of the structural formula for cyclobenzaprine.]. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate.</Description>
</NDC>
<NDC>
<NDCCode>0409-1208-01</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (0409-1208-01) / 10 mL in 1 VIAL, MULTI-DOSE (0409-1208-11) </PackageDescription>
<NDC11Code>00409-1208-01</NDC11Code>
<ProductNDC>0409-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cisatracurium Besylate</ProprietaryName>
<NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203238</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cisatracurium Besylate Injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.</IndicationAndUsage>
<Description>Cisatracurium besylate is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.5. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution provided in 5 mL, 10 mL, and 20 mL vials. The pH is adjusted to 3.0 to 3.8 with benzenesulfonic acid. : 1 The 5 mL single-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate., 2 The 10 mL multiple-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate, and 0.9% benzyl alcohol as a preservative., 3 The 20 mL single-dose vials contain 10 mg/mL cisatracurium, equivalent to 13.38 mg/mL cisatracurium besylate.</Description>
</NDC>
<NDC>
<NDCCode>0456-1208-00</NDCCode>
<PackageDescription>1 BAG in 1 DRUM (0456-1208-00) / 25000 CAPSULE in 1 BAG</PackageDescription>
<NDC11Code>00456-1208-00</NDC11Code>
<ProductNDC>0456-1208</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Memantine Hydrochloride And Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<StartMarketingDate>20160718</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE; MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 7</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-19</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>18-JUL-16</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>70710-1208-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (70710-1208-1) / 1.2 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>70710-1208-01</NDC11Code>
<ProductNDC>70710-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Plerixafor</ProprietaryName>
<NonProprietaryName>Plerixafor</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230728</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208980</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>PLERIXAFOR</SubstanceName>
<StrengthNumber>24</StrengthNumber>
<StrengthUnit>mg/1.2mL</StrengthUnit>
<Pharm_Classes>Hematopoietic Stem Cell Mobilizer [EPC], Increased Hematopoietic Stem Cell Mobilization [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Plerixafor injection, a hematopoietic stem cell mobilizer, is indicated in combination with filgrastim to mobilize hematopoietic stem cells (HSCs) to the peripheral blood for collection and subsequent autologous transplantation in patients with non-Hodgkin's lymphoma or multiple myeloma. (1).</IndicationAndUsage>
<Description>Plerixafor Injection is a sterile, preservative-free, clear, colorless to pale-yellow, isotonic solution for subcutaneous injection. Each mL of the sterile solution contains 20 mg of plerixafor. Each single-dose vial is filled to deliver 1.2 mL of the sterile solution that contains 24 mg of plerixafor and 5.9 mg of sodium chloride in Water for Injection adjusted to a pH of 6.0 to 7.5 with hydrochloric acid and with sodium hydroxide, if required. Plerixafor is a hematopoietic stem cell mobilizer with a chemical name 1,4-Bis ((1,4,8,11-tetraazacyclotetradecan-1-yl) methyl) benzene. It has the molecular formula C28H54N8. The molecular weight of plerixafor is 502.79 g/mol. The structural formula is provided in Figure 1. Plerixafor is a white to off-white crystalline solid. It is hygroscopic. Plerixafor has a typical melting point of 131.5°C. The partition coefficient of plerixafor between 1-octanol and pH 7 aqueous buffer is < 0.1.</Description>
</NDC>
<NDC>
<NDCCode>71335-1208-1</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (71335-1208-1) </PackageDescription>
<NDC11Code>71335-1208-01</NDC11Code>
<ProductNDC>71335-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120322</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200839</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).</IndicationAndUsage>
<Description>Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>71335-1208-2</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (71335-1208-2) </PackageDescription>
<NDC11Code>71335-1208-02</NDC11Code>
<ProductNDC>71335-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120322</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200839</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).</IndicationAndUsage>
<Description>Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>71335-1208-4</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (71335-1208-4) </PackageDescription>
<NDC11Code>71335-1208-04</NDC11Code>
<ProductNDC>71335-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120322</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200839</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).</IndicationAndUsage>
<Description>Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>71335-1208-5</NDCCode>
<PackageDescription>5 TABLET, FILM COATED in 1 BOTTLE (71335-1208-5) </PackageDescription>
<NDC11Code>71335-1208-05</NDC11Code>
<ProductNDC>71335-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120322</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200839</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).</IndicationAndUsage>
<Description>Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>71335-1208-6</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (71335-1208-6) </PackageDescription>
<NDC11Code>71335-1208-06</NDC11Code>
<ProductNDC>71335-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120322</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200839</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).</IndicationAndUsage>
<Description>Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>71335-1208-8</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (71335-1208-8) </PackageDescription>
<NDC11Code>71335-1208-08</NDC11Code>
<ProductNDC>71335-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120322</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200839</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).</IndicationAndUsage>
<Description>Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>71335-1208-9</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71335-1208-9) </PackageDescription>
<NDC11Code>71335-1208-09</NDC11Code>
<ProductNDC>71335-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120322</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200839</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin tablets are fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated (1, 12.4). Pneumonia: Nosocomial (1.1) and Community Acquired (1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated (1.4) and Uncomplicated (1.5) Chronic bacterial prostatitis (1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients (1.7) Plague in adult and pediatric patients (1.8) Urinary Tract Infections (UTI): Complicated (1.9, 1.10) and Uncomplicated (1.12) Acute Pyelonephritis (1.11) Acute Bacterial Exacerbation of Chronic Bronchitis (1.13) Acute Bacterial Sinusitis (1.14). Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria (1.15).</IndicationAndUsage>
<Description>Levofloxacin USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (--(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate.Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4½ H2O and the molecular weight is 370.38. Levofloxacin USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2. Levofloxacin USP is available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red iron oxide. , 2 500 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80 and synthetic red and yellow iron oxides. , 3 750 mg (as expressed in the anhydrous form): hypromellose, crospovidone, microcrystalline cellulose, magnesium stearate, polyethylene glycol, titanium dioxide, polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>67296-0029-7</NDCCode>
<PackageDescription>14 TABLET, DELAYED RELEASE in 1 BOTTLE (67296-0029-7) </PackageDescription>
<NDC11Code>67296-0029-07</NDC11Code>
<ProductNDC>67296-0029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Protonix</ProprietaryName>
<ProprietaryNameSuffix>Delayed-release</ProprietaryNameSuffix>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000501</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020987</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROTONIX is a proton pump inhibitor (PPI) indicated for the following. Short-Term Treatment of Erosive Esophagitis Associated with Gastroesophageal Reflux Disease (GERD) ( 1.1) Maintenance of Healing of Erosive Esophagitis ( 1.2) Pathological Hypersecretory Conditions Including Zollinger-Ellison (ZE) Syndrome ( 1.3). PROTONIX For Delayed-Release Oral Suspension and PROTONIX Delayed-Release Tablets are indicated for.</IndicationAndUsage>
<Description>The active ingredient in PROTONIX (pantoprazole sodium) For Delayed-Release Oral Suspension and PROTONIX (pantoprazole sodium) Delayed-Release Tablets, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1 H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S × 1.5 H 2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium sesquihydrate is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium sesquihydrate is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. PROTONIX is supplied as a for delayed-release oral suspension in unit dose packets, available in one strength 40 mg pantoprazole, (equivalent to 45.1 mg of pantoprazole sodium), and as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.56 mg of pantoprazole sodium) and 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium). PROTONIX Delayed-Release Tablets contains the following inactive ingredients: calcium stearate, crospovidone, hypromellose, iron oxide, mannitol, methacrylic acid copolymer, polysorbate 80, povidone, propylene glycol, sodium carbonate, sodium lauryl sulfate, titanium dioxide, and triethyl citrate. PROTONIX Delayed-Release Tablets (40 mg and 20 mg) complies with USP dissolution test 2. PROTONIX For Delayed-Release Oral Suspension contains the following inactive ingredients: crospovidone, hypromellose, methacrylic acid copolymer, microcrystalline cellulose, polysorbate 80, povidone, sodium carbonate, sodium lauryl sulfate, talc, titanium dioxide, triethyl citrate, and yellow ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0037-7</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (67296-0037-7) </PackageDescription>
<NDC11Code>67296-0037-07</NDC11Code>
<ProductNDC>67296-0037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062702</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indications and Usage.</IndicationAndUsage>
<Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin, USP has the following structural formula. C 16H 17N 3O 4SH 2O M.W. 365.41. The nucleus of cephalexin, USP is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin, USP in water is approximately 4.5 to 5. The crystalline form of cephalexin, USP which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin, USP has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: CAPSULES: magnesium stearate, silicon dioxide, and sodium starch glycolate. Capsule Shell and Print Constituents: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze modified in SD-45, silicon dioxide or carboxymethylcellulose sodium, sodium lauryl sulfate, titanium dioxide and may contain propylene glycol. In addition, the 250 mg capsule shell contains yellow iron oxide. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate, USP equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: SUSPENSION: FD&C Red #40, cherry mixed fruit flavor (artificial flavors, benzyl alcohol, maltodextrin, and modified corn starch), silicon dioxide, sodium benzoate, sugar (fruit granulated), and xanthan gum. Each tablet contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: TABLETS: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0126-7</NDCCode>
<PackageDescription>15 TABLET in 1 BOTTLE (67296-0126-7) </PackageDescription>
<NDC11Code>67296-0126-07</NDC11Code>
<ProductNDC>67296-0126</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085223</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.</IndicationAndUsage>
<Description>Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage forms. Dicyclomine hydrochloride capsules for oral use contain 10 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 10 mg capsules also contain inactive ingredients: sodium lauryl sulfate, D&C Red #28, FD&C Blue #1, FD&C Red #40, gelatin, magnesium stearate, pregelatinized starch, silicon dioxide. Dicyclomine hydrochloride tablets for oral use contain 20 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 20 mg tablets also contain inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue #1, hypromellose, lactose monohydrate, sodium starch glycolate, and stearic acid. Dicyclomine hydrochloride is [bicyclohexyl]-1-carboxylic acid, 2-(diethylamino) ethyl ester, hydrochloride, with a molecular formula of C19H35NO2HCl and the following structural formula. [Dicyclomine Hydrochloride structural formula]. Molecular weight: 345.95. Dicyclomine hydrochloride occurs as a fine, white, crystalline, practically odorless powder with a bitter taste. It is soluble in water, freely soluble in alcohol and chloroform, and very slightly soluble in ether.</Description>
</NDC>
<NDC>
<NDCCode>67296-0154-2</NDCCode>
<PackageDescription>7 TABLET, FILM COATED in 1 BOTTLE (67296-0154-2)</PackageDescription>
<NDC11Code>67296-0154-02</NDC11Code>
<ProductNDC>67296-0154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Avelox</ProprietaryName>
<NonProprietaryName>Moxifloxacin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110225</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021085</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>MOXIFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of AVELOX and other antibacterial drugs, AVELOX should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. AVELOX Tablets and IV are indicated for the treatment of adults (≥ 18 years of age) with infections caused by susceptible strains of the designated microorganisms in the conditions listed below [see Dosage and Administration (2) and Use In Specific Populations (8.5)]. Culture and Susceptibility Testing. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to moxifloxacin [see Clinical Pharmacology (12.4)]. Therapy with AVELOX may be initiated before results of these tests are known; once results become available, appropriate therapy should be continued.</IndicationAndUsage>
<Description>AVELOX (moxifloxacin hydrochloride) is a synthetic broad spectrum antibacterial agent for oral and intravenous administration. Moxifloxacin, a fluoroquinolone, is available as the monohydrochloride salt of 1-cyclopropyl-7-[(S,S)-2,8-diazabicyclo[4.3.0]non-8-yl]-6-fluoro-8-methoxy-1,4-dihydro-4-oxo-3 quinoline carboxylic acid. It is a slightly yellow to yellow crystalline substance with a molecular weight of 437.9. Its empirical formula is C21H24FN3O4*HCl and its chemical structure is as follows.</Description>
</NDC>
<NDC>
<NDCCode>67296-0299-7</NDCCode>
<PackageDescription>4 TABLET in 1 BOTTLE (67296-0299-7) </PackageDescription>
<NDC11Code>67296-0299-07</NDC11Code>
<ProductNDC>67296-0299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040736</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
<StrengthNumber>325; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets, USP are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>Hydrocodone Bitartrate and Acetaminophen Tablets, USP are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. [This is an image of the structural formula of Hydrocodone bitartrate.]. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. [This is an image of the structural formula of Acetaminophen.]. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP contains. Hydrocodone Bitartrate, USP ........................... 5 mg. Acetaminophen, USP .................................... 325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>67296-0320-7</NDCCode>
<PackageDescription>15 CAPSULE in 1 BOTTLE (67296-0320-7)</PackageDescription>
<NDC11Code>67296-0320-07</NDC11Code>
<ProductNDC>67296-0320</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065229</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cephalexin Capsules, USP is indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms: 1 Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin Capsules, USP is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of Cephalexin Capsules, USP in the subsequent prevention of rheumatic fever are not available at present.) , 2 Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphyloccus aureus, Streptococcus pyogenes, and Moraxella catarrhalis, 3 Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes , 4 Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis, 5 Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae.</IndicationAndUsage>
<Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7- (D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C16H17N3O4S H2O and the molecular weight is 365.41. Cephalexin has the following structural formula. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin USP equivalent to 250 mg or 500 mg of anhydrous cephalexin. The capsules also contain the following inactive ingredients D and C Yellow 10, edible printing ink with black iron oxide, FD and C Blue 1, FD and C Green 3, FD and C Yellow 6, gelatin, magnesium stearate, microcrystalline cellulose and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0355-7</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (67296-0355-7) </PackageDescription>
<NDC11Code>67296-0355-07</NDC11Code>
<ProductNDC>67296-0355</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110308</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087463</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110308</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and acetaminophen tablets USP are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>Each tablet, for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths. Oxycodone Hydrochloride USP ..........................................................................5 mg* Acetaminophen USP ........................................................................................325 mg *5 mg oxycodone HCl is equivalent to 4.4815 mg of oxycodone. Oxycodone Hydrochloride USP .......................................................................7.5 mg* Acetaminophen USP ........................................................................................325 mg *7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone. Oxycodone Hydrochloride USP .........................................................................10 mg* Acetaminophen USP .........................................................................................325 mg *10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone. All strengths of oxycodone and acetaminophen tablets USP also contain the following inactive ingredients: crospovidone, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide and stearic acid. Oxycodone, 4,5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride, is a semisynthetic opioid analgesic which occurs as a white, odorless, crystalline powder having a saline, bitter taste. It is derived from the opium alkaloid thebaine. Oxycodone hydrochloride may be represented by the following structural formula. [Oxycodone Chemical Structure]. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. It may be represented by the following structural formula. [Acetaminophen Chemical Structure].</Description>
</NDC>
<NDC>
<NDCCode>67296-0372-2</NDCCode>
<PackageDescription>7 TABLET, FILM COATED in 1 BOTTLE (67296-0372-2)</PackageDescription>
<NDC11Code>67296-0372-02</NDC11Code>
<ProductNDC>67296-0372</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levaquin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19961220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020634</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of LEVAQUIN® and other antibacterial drugs, LEVAQUIN® should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. LEVAQUIN® Tablets/Injection and Oral Solution are indicated for the treatment of adults (≥18 years of age) with mild, moderate, and severe infections caused by susceptible strains of the designated microorganisms in the conditions listed in this section. LEVAQUIN® Injection is indicated when intravenous administration offers a route of administration advantageous to the patient (e.g., patient cannot tolerate an oral dosage form).</IndicationAndUsage>
<Description>LEVAQUIN® is a synthetic broad-spectrum antibacterial agent for oral and intravenous administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4 ½ H2O and the molecular weight is 370.38. Levofloxacin is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2.</Description>
</NDC>
<NDC>
<NDCCode>67296-0406-7</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (67296-0406-7) </PackageDescription>
<NDC11Code>67296-0406-07</NDC11Code>
<ProductNDC>67296-0406</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naproxen</ProprietaryName>
<NonProprietaryName>Naproxen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078250</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>NAPROXEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of naproxen, naproxen sodium and other treatment options before deciding to use naproxen tablets or naproxen sodium tablets. Use the lowest effective dosage for the shortest duration consistent with individual patient treatment goals (see WARNINGS: GASTROINTESTINAL BLEEDING, ULCERATION, AND PERFORATION). Naproxen as naproxen tablets or naproxen sodium tablets are indicated. For the relief of the signs and symptoms of rheumatoid arthritis For the relief of the signs and symptoms of osteoarthritis For the relief of the signs and symptoms of ankylosing spondylitis For the relief of the signs and symptoms of juvenile arthritis. Naproxen as naproxen tablets or naproxen sodium tablets are also indicated. For relief of the signs and symptoms of tendonitis For relief of the signs and symptoms of bursitis For relief of the signs and symptoms of acute gout For the management of pain For the management of primary dysmenorrhea.</IndicationAndUsage>
<Description>Naproxen USP is a propionic acid derivative related to the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical names for naproxen USP and naproxen sodium USP are (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid and (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid, sodium salt, respectively. Naproxen USP and naproxen sodium USP have the following structures, respectively. [chemical-structure]. Naproxen USP has a molecular weight of 230.26 and a molecular formula of C14H14O3. Naproxen sodium USP has a molecular weight of 252.23 and a molecular formula of C14H13NaO3. Naproxen USP is an odorless, white to off-white crystalline substance. It is lipid-soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen at pH 7.4 is 1.6 to 1.8. Naproxen sodium USP is a white to creamy white, crystalline solid, freely soluble in water at neutral pH. Naproxen tablets USP are available as light orange colored tablets containing 250 mg of naproxen USP, light orange colored tablets containing 375 mg of naproxen USP and light orange colored tablets containing 500 mg of naproxen USP for oral administration. The inactive ingredients are microcrystalline cellulose, croscarmellose sodium, iron oxide red, iron oxide yellow, povidone and magnesium stearate. Naproxen sodium tablets USP are available as blue tablets containing 275 mg of naproxen sodium USP and as blue tablets containing 550 mg of naproxen sodium USP for oral administration. The inactive ingredients are croscarmellose sodium, colloidal silicon dioxide, povidone, magnesium stearate, microcrystalline cellulose and talc. The coating suspension for the naproxen sodium 275 mg and 550 mg tablet contains hypromellose, titanium dioxide, polyethylene glycol, FD&C blue#2, and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>67296-0466-7</NDCCode>
<PackageDescription>6 TABLET in 1 BOTTLE (67296-0466-7)</PackageDescription>
<NDC11Code>67296-0466-07</NDC11Code>
<ProductNDC>67296-0466</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040729</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-11-22</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>67296-0470-7</NDCCode>
<PackageDescription>6 TABLET in 1 BOTTLE (67296-0470-7)</PackageDescription>
<NDC11Code>67296-0470-07</NDC11Code>
<ProductNDC>67296-0470</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089971</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Hydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each tablet contains. Hydrocodone Bitartrate ............. 5 mg Acetaminophen ......................... 500 mg. In addition each tablet contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>67296-0569-7</NDCCode>
<PackageDescription>14 TABLET, EXTENDED RELEASE in 1 BOTTLE (67296-0569-7) </PackageDescription>
<NDC11Code>67296-0569-07</NDC11Code>
<ProductNDC>67296-0569</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mucinex</ProprietaryName>
<NonProprietaryName>Guaifenesin</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120703</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021282</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>GUAIFENESIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67296-0584-2</NDCCode>
<PackageDescription>7 TABLET, FILM COATED in 1 BOTTLE (67296-0584-2)</PackageDescription>
<NDC11Code>67296-0584-02</NDC11Code>
<ProductNDC>67296-0584</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levaquin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19961220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020634</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of LEVAQUIN® and other antibacterial drugs, LEVAQUIN® should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. LEVAQUIN® Tablets/Injection and Oral Solution are indicated for the treatment of adults (≥18 years of age) with mild, moderate, and severe infections caused by susceptible strains of the designated microorganisms in the conditions listed in this section. LEVAQUIN® Injection is indicated when intravenous administration offers a route of administration advantageous to the patient (e.g., patient cannot tolerate an oral dosage form).</IndicationAndUsage>
<Description>LEVAQUIN® is a synthetic broad-spectrum antibacterial agent for oral and intravenous administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. The empirical formula is C18H20FN3O4 ½ H2O and the molecular weight is 370.38. Levofloxacin is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3>Cu+2>Zn+2>Mg+2>Ca+2.</Description>
</NDC>
</NDCList>