RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>67296-1315-6</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (67296-1315-6) </PackageDescription>
    <NDC11Code>67296-1315-06</NDC11Code>
    <ProductNDC>67296-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160314</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA063029</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160314</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin HCl is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules, USP and other antibacterial drugs, clindamycin hydrochloride capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride equivalent to 150 mg or 300 mg of clindamycin. Inactive Ingredients. Drug Product: corn starch, lactose monohydrate and magnesium stearate. Capsule Shell and Printing Ink: black iron oxide, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Blue #2 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, gelatin, propylene glycol, shellac, and titanium dioxide. The 150 mg capsule also contains D&amp;C Red #28 and FD&amp;C Red #40. The structural formula is represented below. [Structure]. The chemical name for clindamycin hydrochloride is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-1315-4</NDCCode>
    <PackageDescription>40 CAPSULE in 1 BOTTLE (67296-1315-4) </PackageDescription>
    <NDC11Code>67296-1315-04</NDC11Code>
    <ProductNDC>67296-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160314</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA063029</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160314</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin HCl is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules, USP and other antibacterial drugs, clindamycin hydrochloride capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride equivalent to 150 mg or 300 mg of clindamycin. Inactive Ingredients. Drug Product: corn starch, lactose monohydrate and magnesium stearate. Capsule Shell and Printing Ink: black iron oxide, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Blue #2 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, gelatin, propylene glycol, shellac, and titanium dioxide. The 150 mg capsule also contains D&amp;C Red #28 and FD&amp;C Red #40. The structural formula is represented below. [Structure]. The chemical name for clindamycin hydrochloride is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>0270-1315-95</NDCCode>
    <PackageDescription>6 BOTTLE in 1 BOX (0270-1315-95)  / 500 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>00270-1315-95</NDC11Code>
    <ProductNDC>0270-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Isovue</ProprietaryName>
    <ProprietaryNameSuffix>300</ProprietaryNameSuffix>
    <NonProprietaryName>Iopamidol</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVASCULAR</RouteName>
    <StartMarketingDate>20140620</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020327</ApplicationNumber>
    <LabelerName>Bracco Diagnostics Inc</LabelerName>
    <SubstanceName>IOPAMIDOL</SubstanceName>
    <StrengthNumber>612</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140620</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ISOVUE is a radiographic contrast agent indicated for:. Intra-arterial Procedures† (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
    <Description>ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution. The ISOVUE Imaging Bulk Package is available in two concentrations of iodine: 1 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine., 2 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg sodium) and 1 mg tromethamine.</Description>
  </NDC>
  <NDC>
    <NDCCode>0270-1315-98</NDCCode>
    <PackageDescription>6 BOTTLE in 1 BOX (0270-1315-98)  &gt; 500 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>00270-1315-98</NDC11Code>
    <ProductNDC>0270-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Isovue</ProprietaryName>
    <ProprietaryNameSuffix>300</ProprietaryNameSuffix>
    <NonProprietaryName>Iopamidol</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVASCULAR</RouteName>
    <StartMarketingDate>19941012</StartMarketingDate>
    <EndMarketingDate>20211101</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020327</ApplicationNumber>
    <LabelerName>Bracco Diagnostics Inc</LabelerName>
    <SubstanceName>IOPAMIDOL</SubstanceName>
    <StrengthNumber>612</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Radiographic Contrast Agent [EPC],X-Ray Contrast Activity [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-11-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>19941012</StartMarketingDatePackage>
    <EndMarketingDatePackage>20211101</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0904-1315-46</NDCCode>
    <PackageDescription>5 BLISTER PACK in 1 CARTON (0904-1315-46)  &gt; 6 TABLET, CHEWABLE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00904-1315-46</NDC11Code>
    <ProductNDC>0904-1315</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Bismatrol</ProprietaryName>
    <NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName>
    <DosageFormName>TABLET, CHEWABLE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030103</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part335</ApplicationNumber>
    <LabelerName>Major Pharmaceuticals</LabelerName>
    <SubstanceName>BISMUTH SUBSALICYLATE</SubstanceName>
    <StrengthNumber>262</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bismuth [CS], Bismuth [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20030103</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>relieves: 1 diarrhea, 2 heartburn, 3 indigestion, 4 nausea, 5 upset stomach associated with these symptoms.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>51672-1315-6</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (51672-1315-6)  / 45 g in 1 TUBE</PackageDescription>
    <NDC11Code>51672-1315-06</NDC11Code>
    <ProductNDC>51672-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mometasone Furoate</ProprietaryName>
    <NonProprietaryName>Mometasone Furoate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20041221</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076679</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>MOMETASONE FUROATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20041221</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Mometasone Furoate Cream USP, 0.1% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 2 years of age or older.</IndicationAndUsage>
    <Description>Mometasone Furoate Cream USP, 0.1% contains mometasone furoate for topical use. Mometasone furoate is a synthetic corticosteroid with anti-inflammatory activity. Chemically, mometasone furoate is 9α, 21-dichloro-11β,17-dihydroxy-16α-methylpregna-1,4-diene-3,20-dione 17-(2-furoate), with the empirical formula C 27H 30Cl 2O 6, a molecular weight of 521.4 and the following structural formula:. Mometasone furoate is a white to off-white powder practically insoluble in water, slightly soluble in octanol, and moderately soluble in ethyl alcohol. Each gram of Mometasone Furoate Cream USP, 0.1% contains 1 mg mometasone furoate in a white to off-white cream base of aluminum starch octenylsuccinate, ceteareth-20, phosphoric acid, propylene glycol, propylene glycol stearate, purified water, stearyl alcohol, titanium dioxide, white petrolatum and white wax.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-1315-6</NDCCode>
    <PackageDescription>28 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71335-1315-6) </PackageDescription>
    <NDC11Code>71335-1315-06</NDC11Code>
    <ProductNDC>71335-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Chloride</ProprietaryName>
    <NonProprietaryName>Potassium Chloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170601</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA018279</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
    <StrengthNumber>750</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-05-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190827</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Potassium chloride extended-release tablets are indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.</IndicationAndUsage>
    <Description>Potassium chloride extended-release tablets are a solid oral dosage form of potassium chloride containing 600 mg, 750 mg and 1500 mg of potassium chloride, USP, equivalent to 8 mEq, 10mEq and 20 mEq of potassium, respectively, in a film-coated (not enteric-coated), wax matrix tablet. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP, occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. The 8 mEq and 10 mEq tablets also contain castor oil, cellulosic polymers, colloidal silicon dioxide, D&amp;C Yellow No. 10, magnesium stearate, paraffin, polyvinyl acetate, titanium dioxide, vanillin, and vitamin E. The 20 mEq tablets also contain castor oil, cellulosic polymers, colloidal silicon dioxide, magnesium stearate, paraffin, polyvinyl acetate, titanium dioxide, vanillin, and vitamin E.</Description>
  </NDC>
  <NDC>
    <NDCCode>85509-1315-6</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (85509-1315-6) </PackageDescription>
    <NDC11Code>85509-1315-06</NDC11Code>
    <ProductNDC>85509-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ibuprofen And Famotidine</ProprietaryName>
    <NonProprietaryName>Ibuprofen And Famotidine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230315</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216814</ApplicationNumber>
    <LabelerName>PHOENIX RX LLC</LabelerName>
    <SubstanceName>IBUPROFEN; FAMOTIDINE</SubstanceName>
    <StrengthNumber>800; 26.6</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250929</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ibuprofen and famotidine tablet, a combination of the NSAID ibuprofen and the histamine H 2-receptor antagonist famotidine, is indicated for the relief of signs and symptoms of rheumatoid arthritis and osteoarthritis and to decrease the risk of developing upper gastrointestinal ulcers, which in the clinical trials was defined as a gastric and/or duodenal ulcer, in patients who are taking ibuprofen for those indications. The clinical trials primarily enrolled patients less than 65 years of age without a prior history of gastrointestinal ulcer. Controlled trials do not extend beyond 6 months [see Clinical Studies (14), Use in Specific Populations (8.5)].</IndicationAndUsage>
    <Description>Ibuprofen and famotidine is supplied as a tablet for oral administration which combines the nonsteroidal anti-inflammatory drug, ibuprofen, and the histamine H 2-receptor antagonist, famotidine. Ibuprofen is (±)-2-( p-isobutylphenyl)propionic acid. Its chemical formula is C 13H 18O 2 and molecular weight is 206.28. Ibuprofen is a white powder that is very slightly soluble in water (&lt;1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. Its structural formula is:. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide.  Its chemical formula is C 8H 15N 7O 2S 3 and molecular weight is 337.43. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.  Its structural formula is:. Each ibuprofen and famotidine tablet contains ibuprofen (800 mg) and famotidine, USP (26.6 mg). The inactive ingredients in ibuprofen and famotidine tablet include: microcrystalline cellulose, pregelatinized starch, silicon dioxide, magnesium stearate, Hydroxy Propyl Methyl Cellulose, Glycerin, croscarmellose sodium, FD&amp;C Blue#1, talc, povidone, FD&amp;C Blue#2.</Description>
  </NDC>
  <NDC>
    <NDCCode>0115-1315-01</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1315-01) </PackageDescription>
    <NDC11Code>00115-1315-01</NDC11Code>
    <ProductNDC>0115-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA079087</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
    <SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-02-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
    <Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&amp;C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&amp;C Blue No. 2 and D&amp;C Red No. 27. The 7.5 mg tablets contain FD&amp;C Blue No. 2 and FD&amp;C Red No. 40. The 10 mg tablets contain FD&amp;C Red No. 40. The 20 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Blue No. 1, and FD&amp;C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>0115-1315-03</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1315-03) </PackageDescription>
    <NDC11Code>00115-1315-03</NDC11Code>
    <ProductNDC>0115-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA079087</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
    <SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-02-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
    <Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&amp;C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&amp;C Blue No. 2 and D&amp;C Red No. 27. The 7.5 mg tablets contain FD&amp;C Blue No. 2 and FD&amp;C Red No. 40. The 10 mg tablets contain FD&amp;C Red No. 40. The 20 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Blue No. 1, and FD&amp;C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>0115-1315-08</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1315-08) </PackageDescription>
    <NDC11Code>00115-1315-08</NDC11Code>
    <ProductNDC>0115-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA079087</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
    <SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-02-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
    <Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&amp;C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&amp;C Blue No. 2 and D&amp;C Red No. 27. The 7.5 mg tablets contain FD&amp;C Blue No. 2 and FD&amp;C Red No. 40. The 10 mg tablets contain FD&amp;C Red No. 40. The 20 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Blue No. 1, and FD&amp;C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>0115-1315-13</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1315-13) </PackageDescription>
    <NDC11Code>00115-1315-13</NDC11Code>
    <ProductNDC>0115-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA079087</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
    <SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-02-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
    <Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&amp;C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&amp;C Blue No. 2 and D&amp;C Red No. 27. The 7.5 mg tablets contain FD&amp;C Blue No. 2 and FD&amp;C Red No. 40. The 10 mg tablets contain FD&amp;C Red No. 40. The 20 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Blue No. 1, and FD&amp;C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>0270-1315-45</NDCCode>
    <PackageDescription>10 BOTTLE in 1 BOX (0270-1315-45)  / 200 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>00270-1315-45</NDC11Code>
    <ProductNDC>0270-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Isovue</ProprietaryName>
    <ProprietaryNameSuffix>300</ProprietaryNameSuffix>
    <NonProprietaryName>Iopamidol</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVASCULAR</RouteName>
    <StartMarketingDate>20140620</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020327</ApplicationNumber>
    <LabelerName>Bracco Diagnostics Inc</LabelerName>
    <SubstanceName>IOPAMIDOL</SubstanceName>
    <StrengthNumber>612</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140620</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ISOVUE is a radiographic contrast agent indicated for:. Intra-arterial Procedures† (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
    <Description>ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution. The ISOVUE Imaging Bulk Package is available in two concentrations of iodine: 1 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine., 2 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg sodium) and 1 mg tromethamine.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-1315-2</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-1315-2) </PackageDescription>
    <NDC11Code>22840-1315-02</NDC11Code>
    <ProductNDC>22840-1315</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Yellow Curly Dock</ProprietaryName>
    <NonProprietaryName>Rumex Crispus</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19810915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101833</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>RUMEX CRISPUS POLLEN</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19810915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
    <Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-1315-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-1315-4) </PackageDescription>
    <NDC11Code>22840-1315-04</NDC11Code>
    <ProductNDC>22840-1315</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Yellow Curly Dock</ProprietaryName>
    <NonProprietaryName>Rumex Crispus</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19810915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101833</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>RUMEX CRISPUS POLLEN</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19810915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
    <Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
  </NDC>
  <NDC>
    <NDCCode>43742-1315-1</NDCCode>
    <PackageDescription>30 mL in 1 BOTTLE, DROPPER (43742-1315-1) </PackageDescription>
    <NDC11Code>43742-1315-01</NDC11Code>
    <ProductNDC>43742-1315</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Nerve Z</ProprietaryName>
    <NonProprietaryName>Condurango, Echinacea (angustifolia), Ginkgo Biloba, Ligusticum Porteri, Myrrha, Phytolacca Decandra, Hydrastis Canadensis, Propolis, Glandula Suprarenalis Suis, Spleen (suis), Tabebuia Impetiginosa, Thymus (suis), Thyroidinum (suis), Gelsemium Sempervirens, Lycopodium Clavatum, Nux Vomica, Selenium Metallicum, Pyrogenium</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190110</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Deseret Biologicals, Inc.</LabelerName>
    <SubstanceName>MARSDENIA CONDURANGO BARK; ECHINACEA ANGUSTIFOLIA WHOLE; GINKGO; LIGUSTICUM PORTERI ROOT; MYRRH; PHYTOLACCA AMERICANA ROOT; GOLDENSEAL; PROPOLIS WAX; SUS SCROFA ADRENAL GLAND; SUS SCROFA SPLEEN; TABEBUIA IMPETIGINOSA BARK; THYROID; GELSEMIUM SEMPERVIRENS ROOT; LYCOPODIUM CLAVATUM SPORE; STRYCHNOS NUX-VOMICA SEED; SELENIUM; RANCID BEEF</SubstanceName>
    <StrengthNumber>3; 3; 3; 3; 3; 4; 6; 6; 8; 8; 8; 8; 12; 12; 12; 12; 30</StrengthNumber>
    <StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage> For the temporary relief of symptoms including.  nerve support  itching  tingling  burning  nerve pain. These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>51672-1315-1</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (51672-1315-1)  / 15 g in 1 TUBE</PackageDescription>
    <NDC11Code>51672-1315-01</NDC11Code>
    <ProductNDC>51672-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mometasone Furoate</ProprietaryName>
    <NonProprietaryName>Mometasone Furoate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20041221</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076679</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>MOMETASONE FUROATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20041221</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Mometasone Furoate Cream USP, 0.1% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 2 years of age or older.</IndicationAndUsage>
    <Description>Mometasone Furoate Cream USP, 0.1% contains mometasone furoate for topical use. Mometasone furoate is a synthetic corticosteroid with anti-inflammatory activity. Chemically, mometasone furoate is 9α, 21-dichloro-11β,17-dihydroxy-16α-methylpregna-1,4-diene-3,20-dione 17-(2-furoate), with the empirical formula C 27H 30Cl 2O 6, a molecular weight of 521.4 and the following structural formula:. Mometasone furoate is a white to off-white powder practically insoluble in water, slightly soluble in octanol, and moderately soluble in ethyl alcohol. Each gram of Mometasone Furoate Cream USP, 0.1% contains 1 mg mometasone furoate in a white to off-white cream base of aluminum starch octenylsuccinate, ceteareth-20, phosphoric acid, propylene glycol, propylene glycol stearate, purified water, stearyl alcohol, titanium dioxide, white petrolatum and white wax.</Description>
  </NDC>
  <NDC>
    <NDCCode>60219-1315-9</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE (60219-1315-9) </PackageDescription>
    <NDC11Code>60219-1315-09</NDC11Code>
    <ProductNDC>60219-1315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pregabalin</ProprietaryName>
    <NonProprietaryName>Pregabalin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190719</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209743</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>PREGABALIN</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190719</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pregabalin capsules are indicated for: 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
    <Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is:. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc. The capsule shells contain gelatin and titanium dioxide. In addition, the orange capsule shells contain red iron oxide and white capsule shells contain sodium lauryl sulfate. Each capsule shell is imprinted with black pharmaceutical ink which contains: butyl alcohol, dehydrated alcohol, ferrosoferric oxide, isopropyl alcohol, propylene glycol, potassium hydroxide, purified water, strong ammonia solution and shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0020-2</NDCCode>
    <PackageDescription>6 TABLET, FILM COATED in 1 BOTTLE (67296-0020-2) </PackageDescription>
    <NDC11Code>67296-0020-02</NDC11Code>
    <ProductNDC>67296-0020</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zithromax</ProprietaryName>
    <NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19960718</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050711</ApplicationNumber>
    <LabelerName>Redpharm Drug</LabelerName>
    <SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19960718</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
    <Description>ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&amp;C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&amp;C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0065-6</NDCCode>
    <PackageDescription>6 TABLET in 1 BOTTLE (67296-0065-6) </PackageDescription>
    <NDC11Code>67296-0065-06</NDC11Code>
    <ProductNDC>67296-0065</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
    <NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110706</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040419</ApplicationNumber>
    <LabelerName>RedPharm Drug</LabelerName>
    <SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
    <StrengthNumber>300; 30</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CIII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110706</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Have not been tolerated, or are not expected to be tolerated.</IndicationAndUsage>
    <Description>Acetaminophen and codeine phosphate tablets are available in tablet form for oral administration. Acetaminophen, 4′-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. [Acetaminophen Chemical Structure]. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. [Codeine Phosphate Chemical Structure]. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/15 mg) contains. Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/30 mg) contains. Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/60 mg) contains. Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg. In addition, each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0073-6</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (67296-0073-6)</PackageDescription>
    <NDC11Code>67296-0073-06</NDC11Code>
    <ProductNDC>67296-0073</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA063083</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be re­served for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of co­li­tis, as described in the WARNING box, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride and other antibacterial drugs, clindamycin hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin Hydrochloride Capsules, USP contain clindamycin hydrochloride equivalent to 150 mg or 300 mg of clindamycin. Inactive ingredients: anhydrous lactose, magnesium stearate, starch (corn) and talc. The capsule shells contain: D&amp;C Red No. 28, FD&amp;C Blue No. 1, FD&amp;C Red No. 40, gelatin, and titanium dioxide. The 150 mg capsule shell also contains black iron oxide and yellow iron oxide. The structural formula is represented below. [Structural formula of clindamycin hydrochloride]. C18H33CIN2O5SHCl          M.W. 461.44. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0084-6</NDCCode>
    <PackageDescription>6 TABLET in 1 BOTTLE (67296-0084-6) </PackageDescription>
    <NDC11Code>67296-0084-06</NDC11Code>
    <ProductNDC>67296-0084</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diazepam</ProprietaryName>
    <NonProprietaryName>Diazepam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA071321</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>DIAZEPAM</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diazepam Tablets USP are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, Diazepam Tablets USP may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam Tablets USP are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of Diazepam Tablets USP in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
    <Description>Diazepam Tablets USP are a benzodiazepine derivative. Chemically, diazepam, USP is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. [Diazepam Structural Formula]. C16H13ClN2O M.W. 284.75. Diazepam Tablets USP are available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&amp;C Yellow No. 10 aluminum lake and FD&amp;C Yellow No. 6); 10 mg only (FD&amp;C Blue No. 1 aluminum lake); magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0123-2</NDCCode>
    <PackageDescription>6 TABLET, FILM COATED in 1 BOTTLE (67296-0123-2) </PackageDescription>
    <NDC11Code>67296-0123-02</NDC11Code>
    <ProductNDC>67296-0123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20021031</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065096</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
    <StrengthNumber>875; 125</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20021031</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) and other antibacterial drugs, Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) are combination penicillin-class antibacterials and beta-lactamase inhibitors indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*. 1.1 Lower Respiratory Tract Infections. – caused by beta-lactamase–producing isolates of Haemophilus influenzae and Moraxella catarrhalis. 1.2 Acute Bacterial Otitis Media. – caused by beta-lactamase–producing isolates of H. influenzae and M. catarrhalis. 1.3 Sinusitis. – caused by beta-lactamase–producing isolates of H. influenzae and M. catarrhalis. 1.4 Skin and Skin Structure Infections. – caused by beta-lactamase–producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species. 1.5 Urinary Tract Infections. – caused by beta-lactamase–producing isolates of E. coli, Klebsiella species, and Enterobacter species. 1.6 Limitations of Use. – When susceptibility test results show susceptibility to amoxicillin, USP, indicating no beta-lactamase production, Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) should not be used.</IndicationAndUsage>
    <Description>Amoxicillin and Clavulanate Potassium Tablets, Amoxicillin and Clavulanate Potassium for Oral Suspension, and Amoxicillin and Clavulanate Potassium Tablets (Chewable) are oral antibacterial combinations consisting of the semisynthetic antibiotic amoxicillin, USP and the beta-lactamase inhibitor, clavulanate potassium, USP (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. Chemically, amoxicillin, USP is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and has the following structural formula. [amoxicillin structural formula]. C16H19N3O5S3H2O M.W. 419.45. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. Chemically, clavulanate potassium, USP is potassium (Z)-(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and has the following structural formula. [clavulanic acid structural formula]. C8H8KNO5 M.W. 237.25. Amoxicillin and Clavulanate Potassium Tablets USP. Each tablet contains 500 mg or 875 mg amoxicillin, USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each Amoxicillin and Clavulanate Potassium Tablet USP contains 0.63 mEq potassium. Inactive Ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide, and triacetin. Amoxicillin and Clavulanate Potassium for Oral Suspension USP. After reconstitution each teaspoonful (5 mL) of suspension will contain 200 mg amoxicillin, USP as the trihydrate and 28.5 mg clavulanic acid as the potassium salt or 400 mg amoxicillin, USP as the trihydrate and 57 mg clavulanic acid as the potassium salt. Each 5 mL of reconstituted Amoxicillin and Clavulanate Potassium for Oral Suspension USP, 200 mg/28.5 mg per 5 mL contains 0.14 mEq potassium. Each 5 mL of reconstituted Amoxicillin and Clavulanate Potassium for Oral Suspension USP, 400 mg/57 mg per 5 mL contains 0.29 mEq of potassium. Inactive Ingredients: Powder for oral suspension: artificial raspberry powder, aspartame*, citric acid, colloidal silicon dioxide, mannitol, hypromellose, natural orange flavor, sodium citrate, sodium saccharin and xanthan gum. * See Warnings and Precautions (5.6). Amoxicillin and Clavulanate Potassium Tablets USP (Chewable). Each chewable tablet contains 200 mg amoxicillin, USP as the trihydrate and 28.5 mg clavulanic acid as the potassium salt or contains 400 mg amoxicillin, USP as the trihydrate and 57 mg clavulanic acid as the potassium salt. Each Amoxicillin and Clavulanate Potassium Tablet USP, (Chewable) 200 mg/28.5 mg contains 0.14 mEq potassium. Each Amoxicillin and Clavulanate Potassium Tablet USP, (Chewable) 400 mg/57 mg contains 0.29 mEq potassium. Inactive Ingredients: aspartame*, colloidal silicon dioxide, FD&amp;C Red #40 lake, magnesium stearate, mannitol, microcrystalline cellulose, SA84 artificial ripe banana flavor, and artificial cherry flavor powder. * See Warnings and Precautions (5.6).</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0183-1</NDCCode>
    <PackageDescription>6 TABLET, FILM COATED in 1 BOTTLE (67296-0183-1) </PackageDescription>
    <NDC11Code>67296-0183-01</NDC11Code>
    <ProductNDC>67296-0183</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Famotidine</ProprietaryName>
    <NonProprietaryName>Famotidine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075704</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>FAMOTIDINE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>67296-0192-1</NDCCode>
    <PackageDescription>6 TABLET, FILM COATED in 1 BOTTLE (67296-0192-1) </PackageDescription>
    <NDC11Code>67296-0192-01</NDC11Code>
    <ProductNDC>67296-0192</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Azithromycin</ProprietaryName>
    <NonProprietaryName>Azithromycin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20051116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065153</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>AZITHROMYCIN MONOHYDRATE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051116</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Acute bacterial exacerbations of chronic bronchitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae.  Acute bacterial sinusitis due to Haemophilus influenzae, Moraxella catarrhalis. or Streptococcus pneumoniae.  Community-acquired pneumonia due to Chlamydophila pneumoniae, Haemophilus influenzae,Mycoplasma pneumoniae, or Streptococcus pneumoniae in patients appropriate for oral therapy.  Pharyngitis/tonsillitis caused by Streptococcus pyogenes as an alternative to first-line therapy in individuals who cannot use first-line therapy.  Uncomplicated skin and skin structure infections due to Staphylococcus aureus, Streptococcus pyogenes, or Streptococcus agalactiae.  Urethritis and cervicitis due to Chlamydia trachomatis or Neisseria gonorrhoeae.  Genital ulcer disease in men due to Haemophilus ducreyi (chancroid). Due to the small number of women included in clinical trials, the efficacy of azithromycin in the treatment of chancroid in women has not been established. 1.2 Pediatric Patients. [see Use in Specific Populations (8.4) and Clinical Studies (14.2)].  Acute otitis media (&gt; 6 months of age) caused by Haemophilus influenzae, Moraxella catarrhalis, orStreptococcus pneumoniae  Community-acquired pneumonia (&gt; 6 months of age) due to Chlamydophila pneumoniae,Haemophilus influenzae, Mycoplasma pneumonia, or Streptococcus pneumoniae in patients appropriate for oral therapy.  Pharyngitis/tonsillitis (&gt; 2 years of age) caused by Streptococcus pyogenes as an alternative to first-line therapy in individuals who cannot use first-line therapy. 1.3 Limitations of Use. Azithromycin should not be used in patients with pneumonia who are judged to be inappropriate for oral therapy because of moderate to severe illness or risk factors such as any of the following.  patients with cystic fibrosis,  patients with nosocomial infections,  patients with known or suspected bacteremia,  patients requiring hospitalization,  elderly or debilitated patients, or  patients with significant underlying health problems that may compromise their ability to respond to their illness (including immunodeficiency or functional asplenia).</IndicationAndUsage>
    <Description>Azithromycin tablets USP contain the active ingredient azithromycin, USP, an azalide, a subclass of macrolide antibiotics, for oral administration. Azithromycin, USP has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin, USP is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Azithromycin, USP has the following structural formula. C38H72N2O12 M.W. 748.98. Azithromycin, USP, as the monohydrate, is a white to off-white crystalline powder with a molecular formula of C38H72N2O12H2O and a molecular weight of 767. Azithromycin tablets USP, 250 mg and 500 mg are supplied for oral administration as mottled pink, unscored, film-coated, modified-oval-shaped tablets containing azithromycin monohydrate equivalent to 250 mg or 500 mg azithromycin, USP and the following inactive ingredients: butylated hydroxytoluene, calcium phosphate dibasic anhydrous, carmine, colloidal silicon dioxide, FD&amp;C red #40 lake, FD&amp;C yellow #6 lake, hypromellose, lactose monohydrate, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, talc, titanium dioxide and triacetin.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0227-2</NDCCode>
    <PackageDescription>6 TABLET in 1 BOTTLE (67296-0227-2) </PackageDescription>
    <NDC11Code>67296-0227-02</NDC11Code>
    <ProductNDC>67296-0227</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
    <NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076899</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
    <StrengthNumber>800; 160</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Dihydrofolate Reductase Inhibitor Antibacterial [EPC], Dihydrofolate Reductase Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], Sulfonamide Antimicrobial [EPC], Sulfonamides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets, USP and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Urinary Tract Infections: For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media: For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults: For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzaewhen a physician deems that sulfamethoxazole and trimethoprim could offer some advantage over the use of a single antimicrobial agent. Shigellosis: For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis jiroveci Pneumonia:For the treatment of documented Pneumocystis jiroveci pneumonia and for prophylaxis against P. jiroveci pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing P.jiroveci pneumonia. Traveler’s Diarrhea in Adults: For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.</IndicationAndUsage>
    <Description>Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole, USP and 160 mg trimethoprim, USP; in tablets, each containing 400 mg sulfamethoxazole, USP and 80 mg trimethoprim, USP for oral administration. Sulfamethoxazole, USP is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C10H11N3O3S. It is almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. [fad6060f-figure-01]. Trimethoprim, USP is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3. It has the following structural formula. [fad6060f-figure-02]. Inactive Ingredients: Magnesium stearate, povidone, pregelatinized starch and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0237-1</NDCCode>
    <PackageDescription>6 TABLET, FILM COATED in 1 BOTTLE (67296-0237-1) </PackageDescription>
    <NDC11Code>67296-0237-01</NDC11Code>
    <ProductNDC>67296-0237</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ciprofloxacin</ProprietaryName>
    <NonProprietaryName>Ciprofloxacin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075593</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ciprofloxacin tablets are indicated for the treatment of infections caused by susceptible isolates of the designated microorganisms in the conditions and patient populations listed below. 1.1 Skin and Skin Structure Infections. Ciprofloxacin tablets are indicated in adult patients for treatment of skin and skin structure infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis, Proteus vulgaris, Providencia stuartii, Morganella morganii, Citrobacter freundii, Pseudomonas aeruginosa, methicillin-susceptible Staphylococcus aureus, methicillin-susceptible Staphylococcus epidermidis, or Streptococcus pyogenes. 1.2 Bone and Joint Infections. Ciprofloxacin tablets are indicated in adult patients for treatment of bone and joint infections caused by Enterobacter cloacae, Serratia marcescens, or Pseudomonas aeruginosa. 1.3 Complicated Intra-Abdominal Infections. Ciprofloxacin tablets are indicated in adult patients for treatment of complicated intra-abdominal infections (used in combination with metronidazole) caused by Escherichia coli, Pseudomonas aeruginosa, Proteus mirabilis, Klebsiella pneumoniae, or Bacteroides fragilis. 1.4 Infectious Diarrhea. Ciprofloxacin tablets are indicated in adult patients for treatment of infectious diarrhea caused by Escherichia coli (enterotoxigenic isolates), Campylobacter jejuni, Shigella boydii †, Shigella dysenteriae, Shigella flexneri or Shigella sonnei†when antibacterial therapy is indicated. †Although treatment of infections due to this organism in this organ system demonstrated a clinically significant outcome, efficacy was studied in fewer than 10 patients. 1.5 Typhoid Fever (Enteric Fever). Ciprofloxacin tablets are indicated in adult patients for treatment of typhoid fever (enteric fever) caused by Salmonella typhi. The efficacy of ciprofloxacin in the eradication of the chronic typhoid carrier state has not been demonstrated. 1.6 Uncomplicated Cervical and Urethral Gonorrhea. Ciprofloxacin tablets are indicated in adult patients for treatment of uncomplicated cervical and urethral gonorrhea due to Neisseria gonorrhoeae [see Warnings and Precautions (5.16)]. 1.7 Inhalational Anthrax (Post-Exposure). Ciprofloxacin tablets are indicated in adults and pediatric patients from birth to 17 years of age for inhalational anthrax (post-exposure) to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. Ciprofloxacin serum concentrations achieved in humans served as a surrogate endpoint reasonably likely to predict clinical benefit and provided the initial basis for approval of this indication.1Supportive clinical information for ciprofloxacin for anthrax post-exposure prophylaxis was obtained during the anthrax bioterror attacks of October 2001 [see Clinical Studies (14.2)]. 1.8 Plague. Ciprofloxacin tablets are indicated for treatment of plague, including pneumonic and septicemic plague, due to Yersinia pestis (Y. pestis) and prophylaxis for plague in adults and pediatric patients from birth to 17 years of age. Efficacy studies of ciprofloxacin could not be conducted in humans with plague for feasibility reasons. Therefore this indication is based on an efficacy study conducted in animals only [see Clinical Studies (14.3)]. 1.9 Chronic Bacterial Prostatitis. Ciprofloxacin tablets are indicated in adult patients for treatment of chronic bacterial prostatitis caused by Escherichia coli or Proteus mirabilis. 1.10 Lower Respiratory Tract Infections. Ciprofloxacin tablets are indicated in adult patients for treatment of lower respiratory tract infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis, Pseudomonas aeruginosa, Haemophilus influenzae, Haemophilus parainfluenzae, or Streptococcus pneumoniae. Ciprofloxacin tablets are not a drug of first choice in the treatment of presumed or confirmed pneumonia secondary to Streptococcus pneumoniae. Ciprofloxacin tablets are indicated for the treatment of acute exacerbations of chronic bronchitis (AECB) caused by Moraxella catarrhalis. Because fluoroquinolones, including ciprofloxacin tablets are, have been associated with serious adverse reactions [see Warnings and Precautions (5.1–5.15)] and for some patients AECB is self-limiting, reserve ciprofloxacin tablets are for treatment of AECB in patients who have no alternative treatment options. 1.11 Urinary Tract Infections. Urinary Tract Infections in Adults. Ciprofloxacin tablets are indicated in adult patients for treatment of urinary tract infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Serratia marcescens, Proteus mirabilis, Providencia rettgeri, Morganella morganii, Citrobacter koseri, Citrobacter freundii, Pseudomonas aeruginosa, methicillin-susceptible Staphylococcus epidermidis, Staphylococcus saprophyticus, or Enterococcus faecalis. Acute Uncomplicated Cystitis. Ciprofloxacin tablets are indicated in adult female patients for treatment of acute uncomplicated cystitis caused by Escherichia coli or Staphylococcus saprophyticus. Because fluoroquinolones, including ciprofloxacin tablets, have been associated with serious adverse reactions [see Warnings and Precautions (5.1- 5.15)] and for some patients acute uncomplicated cystitis is self-limiting, reserve ciprofloxacin tablets for treatment of acute uncomplicated cystitis in patients who have no alternative treatment options. Complicated Urinary Tract Infection and Pyelonephritis in Pediatric Patients Ciprofloxacin tablets are indicated in pediatric patients aged one to 17 years of age for treatment of complicated urinary tract infections (cUTI) and pyelonephritis due to Escherichia coli [see Use in Specific Populations (8.4)]. Although effective in clinical trials, Ciprofloxacin tablets are not a drug of first choice in the pediatric population due to an increased incidence of adverse reactions compared to controls, including reactions related to joints and/or surrounding tissues. CIPRO, like other fluoroquinolones, is associated with arthropathy and histopathological changes in weight-bearing joints of juvenile animals [see Warnings and Precautions (5.12), Adverse Reactions (6.1), Use in Specific Populations (8.4) and Nonclinical Toxicology (13.2)]. 1.12 Acute Sinusitis. Ciprofloxacin tablets are indicated in adult patients for treatment of acute sinusitis caused by Haemophilus influenzae, Streptococcus pneumoniae, or Moraxella catarrhalis. Because fluoroquinolones, including ciprofloxacin tablets, have been associated with serious adverse reactions [see Warnings and Precautions (5.1-5.15)] and for some patients acute sinusitis is self-limiting, reserve ciprofloxacin tablets are for treatment of acute sinusitis in patients who have no alternative treatment options. 1.13 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ciprofloxacin tablets are and other antibacterial drugs, ciprofloxacin tablets are should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. If anaerobic organisms are suspected of contributing to the infection, appropriate therapy should be administered. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to ciprofloxacin. Therapy with ciprofloxacin tablets may be initiated before results of these tests are known; once results become available appropriate therapy should be continued. As with other drugs, some isolates of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with ciprofloxacin. Culture and susceptibility testing performed periodically during therapy will provide information not only on the therapeutic effect of the antimicrobial agent but also on the possible emergence of bacterial resistance.</IndicationAndUsage>
    <Description>Ciprofloxacin tablets USP are synthetic antimicrobial agents for oral administration.Ciprofloxacin hydrochloride USP, a fluoroquinolone, is the monohydrochloride monohydratesalt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid.It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Itsmolecular formula is C17H18FN3O3HClH2O and its chemical structure is as follows:17H18FN3O3HClH2O and its chemical structure is as follows:. Ciprofloxacin is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecar boxylic acid. Its empirical formula is C17H18FN3O3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows. Ciprofloxacin film-coated tablets are available in 100 mg, 250 mg, 500 mg and 750 strengths.Ciprofloxacin tablets are white. The inactive ingredients are colloidal silicon dioxide,hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 400, sodiumstarch glycolate, corn starch and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0246-6</NDCCode>
    <PackageDescription>21 CAPSULE in 1 BOTTLE (67296-0246-6) </PackageDescription>
    <NDC11Code>67296-0246-06</NDC11Code>
    <ProductNDC>67296-0246</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cephalexin</ProprietaryName>
    <NonProprietaryName>Cephalexin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20051116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065253</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>CEPHALEXIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051116</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cephalexin capsules are a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria: 1 Respiratory tract infection ( 1.1) , 2 Otitis media ( 1.2) , 3 Skin and skin structure infections ( 1.3) , 4 Bone infections ( 1.4) , 5 Genitourinary tract infections (  1.5)  .</IndicationAndUsage>
    <Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg or 500 mg of cephalexin. The capsules also contain the following inactive ingredients: microcrystalline cellulose, croscarmellose sodium, D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Yellow No. 6, gelatin, magnesium stearate, titanium dioxide, and sodium lauryl sulfate.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0247-6</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (67296-0247-6) </PackageDescription>
    <NDC11Code>67296-0247-06</NDC11Code>
    <ProductNDC>67296-0247</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA087342</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20030213</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone tablets and solutions are indicated in the following conditions. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance); congenital adrenal hyperplasia; hypercalcemia associated with cancer; nonsuppurative thyroiditis. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: psoriatic arthritis, rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy), ankylosing spondylitis, acute and subacute bursitis, acute nonspecific tenosynovitis, acute gouty arthritis, post-traumatic osteoarthritis, synovitis of osteoarthritis, epicondylitis. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, systemic dermatomyositis (polymyositis), acute rheumatic carditis. Dermatologic Diseases. Pemphigus; bullous dermatitis herpetiformis; severe erythema multiforme (Stevens-Johnson syndrome); exfoliative dermatitis; mycosis fungoides; severe psoriasis; severe seborrheic dermatitis. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis; bronchial asthma; contact dermatitis; atopic dermatitis; serum sickness; drug hypersensitivity reactions. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: allergic corneal marginal ulcers, herpes zoster ophthalmicus, anterior segment inflammation, diffuse posterior uveitis and choroiditis, sympathetic ophthalmia, allergic conjunctivitis, keratitis, chorioretinitis, optic neuritis, iritis and iridocyclitis. Respiratory Diseases. Symptomatic sarcoidosis; Loeffler’s syndrome not manageable by other means; berylliosis; fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy; aspiration pneumonitis. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults; secondary thrombocytopenia in adults; acquired (autoimmune) hemolytic anemia; erythroblastopenia (RBC anemia); congenital (erythroid) hypoplastic anemia. Neoplastic Diseases. For palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy; trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
    <Description>Prednisone Tablets USP are available for oral administration containing either 1 mg, 2.5 mg, 5 mg, 10 mg, 20 mg or 50 mg of prednisone USP. Each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate and stearic acid (1 mg, 2.5 mg, and 5 mg only). Prednisone Oral Solution USP is formulated for oral administration containing 5 mg per 5 mL of prednisone USP and alcohol 5%. The oral solution contains the following inactive ingredients: anhydrous citric acid, edetate disodium, fructose, hydrochloric acid, maltol, peppermint oil, polysorbate 80, propylene glycol, saccharin sodium, sodium benzoate, vanilla flavor and purified water. Prednisone Intensol Oral Solution (Concentrate) is formulated for oral administration containing 5 mg per mL of prednisone USP and alcohol 30%. In addition, the oral solution contains the following inactive ingredients: anhydrous citric acid, poloxamer 188, propylene glycol and purified water. Prednisone tablets contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is 17,21-dihydroxypregna-1,4-dienne-3,11,20-trione. The structural formula is represented below. C21H26O5 M.W. 358.44. Prednisone is a white to partially white, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-0254-3</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (67296-0254-3)  / 6 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>67296-0254-03</NDC11Code>
    <ProductNDC>67296-0254</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Azithromycin</ProprietaryName>
    <NonProprietaryName>Azithromycin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20060106</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065225</ApplicationNumber>
    <LabelerName>Redpharm Drug</LabelerName>
    <SubstanceName>AZITHROMYCIN MONOHYDRATE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20060106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Azithromycin tablets are a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications [see Dosage and Administration ( 2)].</IndicationAndUsage>
    <Description>Azithromycin Tablets, USP contain the active ingredient azithromycin, USP, a macrolide antibacterial drug, for oral administration. Azithromycin, USP has the chemical name (2 R,3 S,4 R,5 R,8 R,10 R,11 R,12 S,13 S,14 R)-13-[(2,6-dideoxy-3- C-methyl-3- O-methyl-α-L- ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D- xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin, USP is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Azithromycin, USP has the following structural formula. C 38H 72N 2O 12M.W. 749. Azithromycin, USP, as the monohydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 12H 2O and a molecular weight of 767. Azithromycin Tablets, USP are supplied for oral administration as tablets containing azithromycin monohydrate equivalent to either 250 mg or 500 mg azithromycin, USP and the following inactive ingredients: corn starch, dibasic calcium phosphate anhydrous, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium citrate, sodium lauryl sulfate, and titanium dioxide. The 500 mg tablets also contain FD&amp;C Blue #2.</Description>
  </NDC>
</NDCList>