{
"NDC": [
{
"NDCCode": "67296-1396-2",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (67296-1396-2) ",
"NDC11Code": "67296-1396-02",
"ProductNDC": "67296-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160722",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20160722",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "67296-1396-1",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (67296-1396-1) ",
"NDC11Code": "67296-1396-01",
"ProductNDC": "67296-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160722",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20160722",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "67296-1396-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (67296-1396-3) ",
"NDC11Code": "67296-1396-03",
"ProductNDC": "67296-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160722",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20160722",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "67296-1396-4",
"PackageDescription": "5 TABLET, FILM COATED in 1 BOTTLE (67296-1396-4) ",
"NDC11Code": "67296-1396-04",
"ProductNDC": "67296-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160722",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20160722",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "67296-1396-5",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE (67296-1396-5) ",
"NDC11Code": "67296-1396-05",
"ProductNDC": "67296-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160722",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20160722",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "36987-1396-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1396-2)",
"NDC11Code": "36987-1396-02",
"ProductNDC": "36987-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lima Beans",
"NonProprietaryName": "Lima Beans",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "LIMA BEAN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1396-2",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (37662-1396-2) ",
"NDC11Code": "37662-1396-02",
"ProductNDC": "37662-1396",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Plumbum Iodatum",
"NonProprietaryName": "Plumbum Iodatum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220821",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "LEAD IODIDE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-08-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220821",
"SamplePackage": "N"
},
{
"NDCCode": "51662-1396-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1396-3) / 1 mL in 1 POUCH (51662-1396-2) ",
"NDC11Code": "51662-1396-03",
"ProductNDC": "51662-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERINEURAL",
"StartMarketingDate": "20191016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070597",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-06-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201027",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine Hydrochloride is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (See WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of 0.75% concentration of Bupivacaine Hydrochloride in these patients. Bupivacaine Hydrochloride is not recommended for intravenous regional anesthesia (Bier Block) (See WARNINGS). The routes of administration and indicated Bupivacaine Hydrochloride concentrations are. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Bupivacaine Hydrochloride.",
"Description": "Bupivacaine Hydrochloride is 2-Piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol. It has the following structural formula. Bupivacaine Hydrochloride is available in sterile isotonic solutions with and without epinephrine (as bitartrate) 1:200,000 for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Solutions of Bupivacaine Hydrochloride may be autoclaved if they do not contain epinephrine. Solutions are clear and colorless. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine Hydrochloride Injection, USP is available in sterile, isotonic solutions containing bupivacaine hydrochloride in water for injection with characteristics as follows. Bupivacaine Hydrochloride Injection, USP (without epinephrine). May contain sodium hydroxide and/or hydrochloric acid for pH adjustment (See HOW SUPPLIED section for pH information). Multiple-dose vials contain methylparaben 1 mg/mL added as a preservative. Bupivacaine and Epinephrine Injection, USP is available in sterile, isotonic solutions containing bupivacaine hydrochloride and epinephrine 1:200,000 with characteristics as follows. Bupivacaine and Epinephrine Injection, USP. Sodium metabisulfite 0.1 mg/mL added as antioxidant and edetate calcium disodium, anhydrous 0.1 mg/mL added as stabilizer. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment (See HOW SUPPLIEDHOW SUPPLIED section for pH information). Multiple-dose vials contain methylparaben 1 mg/mL added as a preservative. Single-use solutions contain no added bacteriostat or anti-microbial agent and unused portions should be discarded after use."
},
{
"NDCCode": "51672-1396-6",
"PackageDescription": "2 BOTTLE, SPRAY in 1 CARTON (51672-1396-6) / 50 mL in 1 BOTTLE, SPRAY",
"NDC11Code": "51672-1396-06",
"ProductNDC": "51672-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desoximetasone",
"NonProprietaryName": "Desoximetasone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130411",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA204141",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESOXIMETASONE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180727",
"SamplePackage": "N",
"IndicationAndUsage": "Desoximetasone Topical Spray is a corticosteroid indicated for the treatment of plaque psoriasis in patients 18 years of age or older.",
"Description": "Desoximetasone Topical Spray, 0.25% contains desoximetasone as the active ingredient. Desoximetasone is a corticosteroid with the chemical name of pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-, (11β,16α)-. Desoximetasone has the molecular formula of C 22H 29FO 4and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is. Each gram of Desoximetasone Topical Spray contains 2.5 mg of desoximetasone in a clear, colorless liquid with the following inactive ingredients: glyceryl oleate, isopropyl alcohol (23.4%), isopropyl myristate, L-menthol, and mineral oil. Desoximetasone Topical Spray is co-packaged with a manual spray pump for installation by the pharmacist prior to dispensing to patients."
},
{
"NDCCode": "63629-1396-2",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (63629-1396-2) ",
"NDC11Code": "63629-1396-02",
"ProductNDC": "63629-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079148",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "850",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC],Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20090603",
"SamplePackage": "N"
},
{
"NDCCode": "64942-1396-2",
"PackageDescription": "45 g in 1 CONTAINER (64942-1396-2) ",
"NDC11Code": "64942-1396-02",
"ProductNDC": "64942-1396",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dove",
"ProprietaryNameSuffix": "Advanced Care Original Clean Antiperspirant And Deodorant",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20141215",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Conopco Inc. d/b/a Unilever",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "15.2",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20141215",
"SamplePackage": "N",
"IndicationAndUsage": "Uses. reduces underarm wetness."
},
{
"NDCCode": "67938-1396-1",
"PackageDescription": "1 CONTAINER in 1 BOX (67938-1396-1) > 8.33 g in 1 CONTAINER (67938-1396-2)",
"NDC11Code": "67938-1396-01",
"ProductNDC": "67938-1396",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pure Finish Mineral Powder Foundation Spf 20 Pure Finish 7",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100920",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Elizabeth Arden, Inc",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": ".358",
"StrengthUnit": "g/8.33g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "To Use: Turn dial to the right to release product. Smooth on to face before sun exposure.",
"Description": "For all skin types. Mediun/full coverage. Pure, luminous finish. Pure minerals. Pure comfort. Pure perfection. This microlight mineral makeup is ultra blendable and buildable. SPF 20 sun protection. Fragrance free. Talc free. Oil free. Freshly ground for ultimate purity. Clinically and dermatologist tested. Sensititve skin tested."
},
{
"NDCCode": "71335-1396-2",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE (71335-1396-2) ",
"NDC11Code": "71335-1396-02",
"ProductNDC": "71335-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151230",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090796",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2020-05-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191118",
"SamplePackage": "N"
},
{
"NDCCode": "72162-1396-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1396-2) / 15 g in 1 TUBE",
"NDC11Code": "72162-1396-02",
"ProductNDC": "72162-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Halobetasol Propionate",
"NonProprietaryName": "Halobetasol Propionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076872",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "HALOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240311",
"SamplePackage": "N",
"IndicationAndUsage": "Halobetasol propionate ointment, 0.05% is a super-high potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond two consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis.",
"Description": "Halobetasol propionate ointment, 0.05% contains halobetasol propionate, a synthetic corticosteroid for topical dermatological use. The corticosteroids constitute a class of primarily synthetic steroids used topically as an anti-inflammatory and antipruritic agent. Chemically halobetasol propionate is 21-chloro-6α, 9-difluoro-11β, 17-dihydroxy-16β-methylpregna-1, 4-diene-3-20-dione, 17-propionate, C25H31ClF2O5. It has the following structural formula. Halobetasol propionate has the molecular weight of 485. It is a white crystalline powder insoluble in water. Each gram of halobetasol propionate ointment, 0.05% contains 0.5 mg of halobetasol propionate in a base of aluminum stearate, beeswax, pentaerythritol cocoate, stearyl citrate, petrolatum, propylene glycol and sorbitan sesquioleate."
},
{
"NDCCode": "85509-1396-2",
"PackageDescription": "20 CAPSULE, DELAYED RELEASE in 1 BOTTLE (85509-1396-2) ",
"NDC11Code": "85509-1396-02",
"ProductNDC": "85509-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091672",
"LabelerName": "PHOENIX RX LLC",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250723",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the:. Treatment of active duodenal ulcer in adults ( 1.1) . Eradication of Helicobacter pylorito reduce the risk of duodenal ulcer recurrence in adults ( 1.2) . Treatment of active benign gastric ulcer in adults ( 1.3) . Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) . Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) . Pathologic hypersecretory conditions in adults ( 1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42 g/mol. The structural formula is:. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac."
},
{
"NDCCode": "0220-1396-41",
"PackageDescription": "30 [hp_C] in 1 TUBE (0220-1396-41) ",
"NDC11Code": "00220-1396-41",
"ProductNDC": "0220-1396",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cinchona Officinalis",
"NonProprietaryName": "Cinchona Officinalis Bark",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "19830303",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Boiron",
"SubstanceName": "CINCHONA OFFICINALIS BARK",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/30[hp_C]",
"Status": "Active",
"LastUpdate": "2026-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19830303",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves symptoms of diarrheas such as: 1 bloating, 2 gas, 3 fatigue, 4 physical weakness."
},
{
"NDCCode": "0220-1396-43",
"PackageDescription": "3 TUBE in 1 BOX (0220-1396-43) / 30 [hp_C] in 1 TUBE",
"NDC11Code": "00220-1396-43",
"ProductNDC": "0220-1396",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cinchona Officinalis",
"NonProprietaryName": "Cinchona Officinalis Bark",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "19830303",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Boiron",
"SubstanceName": "CINCHONA OFFICINALIS BARK",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/30[hp_C]",
"Status": "Active",
"LastUpdate": "2026-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200901",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves symptoms of diarrheas such as: 1 bloating, 2 gas, 3 fatigue, 4 physical weakness."
},
{
"NDCCode": "0527-1396-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (0527-1396-01) ",
"NDC11Code": "00527-1396-01",
"ProductNDC": "0527-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20110926",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090695",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110926",
"SamplePackage": "N",
"IndicationAndUsage": "Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects.",
"Description": "Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25 or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue #1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone."
},
{
"NDCCode": "0527-1396-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE, PLASTIC (0527-1396-10) ",
"NDC11Code": "00527-1396-10",
"ProductNDC": "0527-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20110926",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090695",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110926",
"SamplePackage": "N",
"IndicationAndUsage": "Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects.",
"Description": "Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25 or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue #1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone."
},
{
"NDCCode": "22840-1396-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (22840-1396-1) ",
"NDC11Code": "22840-1396-01",
"ProductNDC": "22840-1396",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Western Ragweed",
"NonProprietaryName": "Ambrosia Psilostachya",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "AMBROSIA PSILOSTACHYA POLLEN",
"StrengthNumber": ".001",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "43742-1396-1",
"PackageDescription": "30 mL in 1 BOTTLE, DROPPER (43742-1396-1) ",
"NDC11Code": "43742-1396-01",
"ProductNDC": "43742-1396",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Virus Plus",
"NonProprietaryName": "Influenzinum (2018-2019), Adenoviren Nosode, Herpes Simplex 1 Nosode, Herpes Simplex 2 Nosode, Cytomegalovirus Nosode, Epstein-barr Virus Nosode, Hepatitis B Nosode, Norovirus Nosode",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20181102",
"EndMarketingDate": "20231210",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Deseret Biologicals, Inc.",
"SubstanceName": "HEPATITIS B VIRUS; HUMAN ADENOVIRUS B SEROTYPE 7 STRAIN 55142 ANTIGEN; HUMAN ADENOVIRUS E SEROTYPE 4 STRAIN CL-68578 ANTIGEN; HUMAN HERPESVIRUS 1; HUMAN HERPESVIRUS 2; HUMAN HERPESVIRUS 4; HUMAN HERPESVIRUS 5; INFLUENZA A VIRUS A/SINGAPORE/GP1908/2015 IVR-180 (H1N1) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/SINGAPORE/INFIMH-16-0019/2016 NIB-104 (H3N2) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/MARYLAND/15/2016 ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/PHUKET/3073/2013 ANTIGEN (FORMALDEHYDE INACTIVATED); NORWALK VIRUS",
"StrengthNumber": "33; 15; 15; 15; 15; 18; 18; 12; 12; 12; 12; 30",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Live Human Adenovirus Type 4 Vaccine [EPC], Live Human Adenovirus Type 7 Vaccine [EPC], Vaccines, Adenovirus [Chemical/Ingredient], Vaccines, Adenovirus [Chemical/Ingredient], Vaccines, Live, Unattenuated [Chemical/Ingredient], Vaccines, Live, Unattenuated [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2023-12-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181102",
"EndMarketingDatePackage": "20231210",
"SamplePackage": "N"
},
{
"NDCCode": "51662-1396-1",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (51662-1396-1) ",
"NDC11Code": "51662-1396-01",
"ProductNDC": "51662-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERINEURAL",
"StartMarketingDate": "20191016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070597",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-06-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191016",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine Hydrochloride is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (See WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of 0.75% concentration of Bupivacaine Hydrochloride in these patients. Bupivacaine Hydrochloride is not recommended for intravenous regional anesthesia (Bier Block) (See WARNINGS). The routes of administration and indicated Bupivacaine Hydrochloride concentrations are. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Bupivacaine Hydrochloride.",
"Description": "Bupivacaine Hydrochloride is 2-Piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol. It has the following structural formula. Bupivacaine Hydrochloride is available in sterile isotonic solutions with and without epinephrine (as bitartrate) 1:200,000 for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Solutions of Bupivacaine Hydrochloride may be autoclaved if they do not contain epinephrine. Solutions are clear and colorless. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine Hydrochloride Injection, USP is available in sterile, isotonic solutions containing bupivacaine hydrochloride in water for injection with characteristics as follows. Bupivacaine Hydrochloride Injection, USP (without epinephrine). May contain sodium hydroxide and/or hydrochloric acid for pH adjustment (See HOW SUPPLIED section for pH information). Multiple-dose vials contain methylparaben 1 mg/mL added as a preservative. Bupivacaine and Epinephrine Injection, USP is available in sterile, isotonic solutions containing bupivacaine hydrochloride and epinephrine 1:200,000 with characteristics as follows. Bupivacaine and Epinephrine Injection, USP. Sodium metabisulfite 0.1 mg/mL added as antioxidant and edetate calcium disodium, anhydrous 0.1 mg/mL added as stabilizer. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment (See HOW SUPPLIEDHOW SUPPLIED section for pH information). Multiple-dose vials contain methylparaben 1 mg/mL added as a preservative. Single-use solutions contain no added bacteriostat or anti-microbial agent and unused portions should be discarded after use."
},
{
"NDCCode": "51672-1396-3",
"PackageDescription": "1 BOTTLE, SPRAY in 1 CARTON (51672-1396-3) / 30 mL in 1 BOTTLE, SPRAY",
"NDC11Code": "51672-1396-03",
"ProductNDC": "51672-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desoximetasone",
"NonProprietaryName": "Desoximetasone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130411",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA204141",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESOXIMETASONE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180727",
"SamplePackage": "N",
"IndicationAndUsage": "Desoximetasone Topical Spray is a corticosteroid indicated for the treatment of plaque psoriasis in patients 18 years of age or older.",
"Description": "Desoximetasone Topical Spray, 0.25% contains desoximetasone as the active ingredient. Desoximetasone is a corticosteroid with the chemical name of pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-, (11β,16α)-. Desoximetasone has the molecular formula of C 22H 29FO 4and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is. Each gram of Desoximetasone Topical Spray contains 2.5 mg of desoximetasone in a clear, colorless liquid with the following inactive ingredients: glyceryl oleate, isopropyl alcohol (23.4%), isopropyl myristate, L-menthol, and mineral oil. Desoximetasone Topical Spray is co-packaged with a manual spray pump for installation by the pharmacist prior to dispensing to patients."
},
{
"NDCCode": "51672-1396-4",
"PackageDescription": "1 BOTTLE, SPRAY in 1 CARTON (51672-1396-4) / 50 mL in 1 BOTTLE, SPRAY",
"NDC11Code": "51672-1396-04",
"ProductNDC": "51672-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desoximetasone",
"NonProprietaryName": "Desoximetasone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130411",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA204141",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESOXIMETASONE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180727",
"SamplePackage": "N",
"IndicationAndUsage": "Desoximetasone Topical Spray is a corticosteroid indicated for the treatment of plaque psoriasis in patients 18 years of age or older.",
"Description": "Desoximetasone Topical Spray, 0.25% contains desoximetasone as the active ingredient. Desoximetasone is a corticosteroid with the chemical name of pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-, (11β,16α)-. Desoximetasone has the molecular formula of C 22H 29FO 4and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is. Each gram of Desoximetasone Topical Spray contains 2.5 mg of desoximetasone in a clear, colorless liquid with the following inactive ingredients: glyceryl oleate, isopropyl alcohol (23.4%), isopropyl myristate, L-menthol, and mineral oil. Desoximetasone Topical Spray is co-packaged with a manual spray pump for installation by the pharmacist prior to dispensing to patients."
},
{
"NDCCode": "51672-1396-7",
"PackageDescription": "1 BOTTLE, SPRAY in 1 CARTON (51672-1396-7) / 100 mL in 1 BOTTLE, SPRAY",
"NDC11Code": "51672-1396-07",
"ProductNDC": "51672-1396",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desoximetasone",
"NonProprietaryName": "Desoximetasone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130411",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA204141",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESOXIMETASONE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180727",
"SamplePackage": "N",
"IndicationAndUsage": "Desoximetasone Topical Spray is a corticosteroid indicated for the treatment of plaque psoriasis in patients 18 years of age or older.",
"Description": "Desoximetasone Topical Spray, 0.25% contains desoximetasone as the active ingredient. Desoximetasone is a corticosteroid with the chemical name of pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-, (11β,16α)-. Desoximetasone has the molecular formula of C 22H 29FO 4and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is. Each gram of Desoximetasone Topical Spray contains 2.5 mg of desoximetasone in a clear, colorless liquid with the following inactive ingredients: glyceryl oleate, isopropyl alcohol (23.4%), isopropyl myristate, L-menthol, and mineral oil. Desoximetasone Topical Spray is co-packaged with a manual spray pump for installation by the pharmacist prior to dispensing to patients."
},
{
"NDCCode": "67296-0002-2",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (67296-0002-2) ",
"NDC11Code": "67296-0002-02",
"ProductNDC": "67296-0002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA061926",
"LabelerName": "Redpharm Drug",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2025-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19900930",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. , 2 Infections of the Genitourinary Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Escherichia coli, Proteus mirabilis, or Enterococcus faecalis. , 3 Infections of the Skin and Skin Structure:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), Staphylococcusspp., or E. coli. , 4 Infections of the Lower Respiratory Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), S. pneumoniae, Staphylococcusspp., or H. influenzae. .",
"Description": "Amoxicillin, USP is a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin, USP molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Tablets:Each tablet contains 500 mg or 875 mg of amoxicillin, USP as the trihydrate. Each film-coated tablet contains: colloidal silicon dioxide, crospovidone, D&C Yellow No. 10 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, lactose monohydrate, sodium starch glycolate, titanium dioxide and triacetin. For Oral Suspension:Each 5 mL of reconstituted suspension contains 200 mg, 250 mg or 400 mg of amoxicillin, USP as the trihydrate. Each 5 mL of the 200 mg reconstituted suspension contains 0.09 mEq (2.11 mg) of sodium. Each 5 mL of the 250 mg reconstituted suspension contains 0.14 mEq (3.24 mg) of sodium. Each 5 mL of the 400 mg reconstituted suspension contains 0.12 mEq (2.69 mg) of sodium. Inactive ingredients for 200 mg and 400 mg: Colloidal silicon dioxide, FD&C Red No. 40, natural and artificial fruit gum flavor, sodium benzoate, sodium citrate, spray dried mask flavor, sucrose, and xanthan gum. Inactive ingredients for 250 mg: FD&C Red No. 40, mixed berry flavoring, silicon dioxide, sodium benzoate, sodium citrate, sucrose, and xanthan gum. Tablets (Chewable):Each tablet contains 125 mg or 250 mg of amoxicillin, USP as the trihydrate. Inactive ingredients in each 125 mg or 250 mg chewable tablet: cherry flavor, lactose anhydrous, magnesium stearate, mannitol, microcrystalline cellulose, sodium citrate, and sucrose. Capsules:Each capsule, for oral administration, contains 250 mg or 500 mg amoxicillin, USP as the trihydrate. The capsules contain the following inactive ingredients: magnesium stearate and talc. The capsule shell contains D&C Yellow No. 10, FD&C Red No. 40, gelatin, and titanium dioxide. In addition, the 250 mg contains D&C Red No. 28 and FD&C Blue No. 1. The 500 mg may also contain methylparaben, propylparaben, and sodium lauryl sulfate. The printing ink contains black iron oxide, propylene glycol, shellac, and strong ammonia solution. In addition, the 250 mg may contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, and FD&C Red No. 40 Aluminum Lake. The 500 mg may also contain potassium hydroxide."
},
{
"NDCCode": "67296-0007-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (67296-0007-2)",
"NDC11Code": "67296-0007-02",
"ProductNDC": "67296-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19890503",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula. [cyclobenzaprine hydrochloride structural formula]. C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "67296-0016-2",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-0016-2)",
"NDC11Code": "67296-0016-02",
"ProductNDC": "67296-0016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Acetaminophen",
"NonProprietaryName": "Hydrocodone, Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110303",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA081083",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 750",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGEHydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.",
"Description": "DESCRIPTIONHydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5a- Epoxy-3-methoxy-17-methylmorphinan- 6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4’-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Hydrocodone bitartrate and acetaminophen tablets, USP for oral administration are available in the following strengths. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, croscarmellose sodium, crospovidone, magnesium stearate,microcrystalline cellulose, povidone, starch, and stearic acid; except the 7.5mg/325mg, 10 mg/325 mg and 10 mg/500 mg tablets do not contain anhydrous lactose. The 7.5 mg/325 mg tablets include FD and C Yellow # 6 Aluminum Lake; the 7.5 mg/650 mg tablets include FD and C Red #40 Aluminum Lake; the 10 mg/325 mg and 10 mg/750 mg tablets include D and C Yellow # 10 Aluminum Lake; the 10 mg/500 mg tablets include FD and C Blue #2 Aluminum Lake; and the 10 mg/650mg tablets include FD and C Blue #1 Aluminum Lake and D and C Yellow #10 Aluminum Lake. Meets USP Dissolution Test 1."
},
{
"NDCCode": "67296-0020-2",
"PackageDescription": "6 TABLET, FILM COATED in 1 BOTTLE (67296-0020-2) ",
"NDC11Code": "67296-0020-02",
"ProductNDC": "67296-0020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zithromax",
"NonProprietaryName": "Azithromycin Dihydrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19960718",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050711",
"LabelerName": "Redpharm Drug",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2025-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19960718",
"SamplePackage": "N",
"IndicationAndUsage": "ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin."
},
{
"NDCCode": "67296-0023-2",
"PackageDescription": "40 CAPSULE in 1 BOTTLE (67296-0023-2)",
"NDC11Code": "67296-0023-02",
"ProductNDC": "67296-0023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100128",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA061926",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Amoxicillin is indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) strains of the designated microorganisms in the conditions listed below. Infections of the ear, nose, and throat - due to Streptococcus spp. (α- and β-hemolytic strains only), S. pneumoniae, Staphylococcus spp., or H. influenzae. Infections of the genitourinary tract - due to E. coli, P. mirabilis, or E. faecalis. Infections of the skin and skin structure - due to Streptococcus spp. (α- and β-hemolytic strains only), Staphylococcus spp., or E. coli. Infections of the lower respiratory tract - due to Streptococcus spp. (α- and β-hemolytic strains only), S. pneumoniae, Staphylococcus spp., or H. influenzae. Gonorrhea, acute uncomplicated (ano-genital and urethral infections) - due to N. gonorrhoeae (males and females). H. pylori eradication to reduce the risk of duodenal ulcer recurrence.",
"Description": "C16H19N3O5S3H2O M.W. 419.45. Each capsule, for oral administration, contains 250 mg or 500 mg amoxicillin as the trihydrate. Inactive Ingredients: CAPSULES-DRUG PRODUCT: magnesium stearate. CAPSULE SHELL AND PRINT CONSTITUENTS: black iron oxide, D and C Yellow No. 10, FD and C Red No. 40, gelatin, propylene glycol, shellac, sodium lauryl sulfate, titanium dioxide, and may also contain D and C Yellow No. 10 Aluminum Lake, FD and C Blue No. 1 Aluminum Lake, FD and C Blue No. 2, FD and C Blue No. 2 Aluminum Lake, FD and C Red No. 40 Aluminum Lake, methylparaben, propylparaben, and silicon dioxide. In addition, the 250 mg capsule shell contains D and C Red No. 28 and FD and C Blue No. 1 and the 500 mg capsule shell may also contain FD and C Blue No 1. After mixing, each 5 mL of amoxicillin suspension, for oral administration, will contain 125 mg or 250 mg of amoxicillin as the trihydrate. Inactive Ingredients: SUSPENSION: FD and C Red No. 40, mixed berry flavoring, silicon dioxide, sodium benzoate, sodium citrate, sucrose, and xanthan gum. Each chewable tablet, for oral administration, contains 125 mg or 250 mg of amoxicillin as the trihydrate. Inactive Ingredients: CHEWABLE TABLETS: cherry flavor, lactose, magnesium stearate, mannitol, microcrystalline cellulose, sodium citrate, and sucrose."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67296-1396-2</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (67296-1396-2) </PackageDescription>
<NDC11Code>67296-1396-02</NDC11Code>
<ProductNDC>67296-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160722</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>67296-1396-1</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (67296-1396-1) </PackageDescription>
<NDC11Code>67296-1396-01</NDC11Code>
<ProductNDC>67296-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160722</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>67296-1396-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (67296-1396-3) </PackageDescription>
<NDC11Code>67296-1396-03</NDC11Code>
<ProductNDC>67296-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160722</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>67296-1396-4</NDCCode>
<PackageDescription>5 TABLET, FILM COATED in 1 BOTTLE (67296-1396-4) </PackageDescription>
<NDC11Code>67296-1396-04</NDC11Code>
<ProductNDC>67296-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160722</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>67296-1396-5</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (67296-1396-5) </PackageDescription>
<NDC11Code>67296-1396-05</NDC11Code>
<ProductNDC>67296-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160722</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>36987-1396-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1396-2)</PackageDescription>
<NDC11Code>36987-1396-02</NDC11Code>
<ProductNDC>36987-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lima Beans</ProprietaryName>
<NonProprietaryName>Lima Beans</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>LIMA BEAN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1396-2</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-1396-2) </PackageDescription>
<NDC11Code>37662-1396-02</NDC11Code>
<ProductNDC>37662-1396</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Plumbum Iodatum</ProprietaryName>
<NonProprietaryName>Plumbum Iodatum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220821</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>LEAD IODIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-08-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51662-1396-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1396-3) / 1 mL in 1 POUCH (51662-1396-2) </PackageDescription>
<NDC11Code>51662-1396-03</NDC11Code>
<ProductNDC>51662-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERINEURAL</RouteName>
<StartMarketingDate>20191016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070597</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine Hydrochloride is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (See WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of 0.75% concentration of Bupivacaine Hydrochloride in these patients. Bupivacaine Hydrochloride is not recommended for intravenous regional anesthesia (Bier Block) (See WARNINGS). The routes of administration and indicated Bupivacaine Hydrochloride concentrations are. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Bupivacaine Hydrochloride.</IndicationAndUsage>
<Description>Bupivacaine Hydrochloride is 2-Piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol. It has the following structural formula. Bupivacaine Hydrochloride is available in sterile isotonic solutions with and without epinephrine (as bitartrate) 1:200,000 for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Solutions of Bupivacaine Hydrochloride may be autoclaved if they do not contain epinephrine. Solutions are clear and colorless. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine Hydrochloride Injection, USP is available in sterile, isotonic solutions containing bupivacaine hydrochloride in water for injection with characteristics as follows. Bupivacaine Hydrochloride Injection, USP (without epinephrine). May contain sodium hydroxide and/or hydrochloric acid for pH adjustment (See HOW SUPPLIED section for pH information). Multiple-dose vials contain methylparaben 1 mg/mL added as a preservative. Bupivacaine and Epinephrine Injection, USP is available in sterile, isotonic solutions containing bupivacaine hydrochloride and epinephrine 1:200,000 with characteristics as follows. Bupivacaine and Epinephrine Injection, USP. Sodium metabisulfite 0.1 mg/mL added as antioxidant and edetate calcium disodium, anhydrous 0.1 mg/mL added as stabilizer. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment (See HOW SUPPLIEDHOW SUPPLIED section for pH information). Multiple-dose vials contain methylparaben 1 mg/mL added as a preservative. Single-use solutions contain no added bacteriostat or anti-microbial agent and unused portions should be discarded after use.</Description>
</NDC>
<NDC>
<NDCCode>51672-1396-6</NDCCode>
<PackageDescription>2 BOTTLE, SPRAY in 1 CARTON (51672-1396-6) / 50 mL in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>51672-1396-06</NDC11Code>
<ProductNDC>51672-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desoximetasone</ProprietaryName>
<NonProprietaryName>Desoximetasone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130411</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA204141</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESOXIMETASONE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desoximetasone Topical Spray is a corticosteroid indicated for the treatment of plaque psoriasis in patients 18 years of age or older.</IndicationAndUsage>
<Description>Desoximetasone Topical Spray, 0.25% contains desoximetasone as the active ingredient. Desoximetasone is a corticosteroid with the chemical name of pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-, (11β,16α)-. Desoximetasone has the molecular formula of C 22H 29FO 4and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is. Each gram of Desoximetasone Topical Spray contains 2.5 mg of desoximetasone in a clear, colorless liquid with the following inactive ingredients: glyceryl oleate, isopropyl alcohol (23.4%), isopropyl myristate, L-menthol, and mineral oil. Desoximetasone Topical Spray is co-packaged with a manual spray pump for installation by the pharmacist prior to dispensing to patients.</Description>
</NDC>
<NDC>
<NDCCode>63629-1396-2</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (63629-1396-2) </PackageDescription>
<NDC11Code>63629-1396-02</NDC11Code>
<ProductNDC>63629-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079148</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>850</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC],Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64942-1396-2</NDCCode>
<PackageDescription>45 g in 1 CONTAINER (64942-1396-2) </PackageDescription>
<NDC11Code>64942-1396-02</NDC11Code>
<ProductNDC>64942-1396</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dove</ProprietaryName>
<ProprietaryNameSuffix>Advanced Care Original Clean Antiperspirant And Deodorant</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20141215</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Conopco Inc. d/b/a Unilever</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>15.2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses. reduces underarm wetness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67938-1396-1</NDCCode>
<PackageDescription>1 CONTAINER in 1 BOX (67938-1396-1) > 8.33 g in 1 CONTAINER (67938-1396-2)</PackageDescription>
<NDC11Code>67938-1396-01</NDC11Code>
<ProductNDC>67938-1396</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pure Finish Mineral Powder Foundation Spf 20 Pure Finish 7</ProprietaryName>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100920</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Elizabeth Arden, Inc</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>.358</StrengthNumber>
<StrengthUnit>g/8.33g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To Use: Turn dial to the right to release product. Smooth on to face before sun exposure.</IndicationAndUsage>
<Description>For all skin types. Mediun/full coverage. Pure, luminous finish. Pure minerals. Pure comfort. Pure perfection. This microlight mineral makeup is ultra blendable and buildable. SPF 20 sun protection. Fragrance free. Talc free. Oil free. Freshly ground for ultimate purity. Clinically and dermatologist tested. Sensititve skin tested.</Description>
</NDC>
<NDC>
<NDCCode>71335-1396-2</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (71335-1396-2) </PackageDescription>
<NDC11Code>71335-1396-02</NDC11Code>
<ProductNDC>71335-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151230</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090796</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-05-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72162-1396-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1396-2) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1396-02</NDC11Code>
<ProductNDC>72162-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Halobetasol Propionate</ProprietaryName>
<NonProprietaryName>Halobetasol Propionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076872</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>HALOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Halobetasol propionate ointment, 0.05% is a super-high potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond two consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis.</IndicationAndUsage>
<Description>Halobetasol propionate ointment, 0.05% contains halobetasol propionate, a synthetic corticosteroid for topical dermatological use. The corticosteroids constitute a class of primarily synthetic steroids used topically as an anti-inflammatory and antipruritic agent. Chemically halobetasol propionate is 21-chloro-6α, 9-difluoro-11β, 17-dihydroxy-16β-methylpregna-1, 4-diene-3-20-dione, 17-propionate, C25H31ClF2O5. It has the following structural formula. Halobetasol propionate has the molecular weight of 485. It is a white crystalline powder insoluble in water. Each gram of halobetasol propionate ointment, 0.05% contains 0.5 mg of halobetasol propionate in a base of aluminum stearate, beeswax, pentaerythritol cocoate, stearyl citrate, petrolatum, propylene glycol and sorbitan sesquioleate.</Description>
</NDC>
<NDC>
<NDCCode>85509-1396-2</NDCCode>
<PackageDescription>20 CAPSULE, DELAYED RELEASE in 1 BOTTLE (85509-1396-2) </PackageDescription>
<NDC11Code>85509-1396-02</NDC11Code>
<ProductNDC>85509-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091672</ApplicationNumber>
<LabelerName>PHOENIX RX LLC</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250723</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the:. Treatment of active duodenal ulcer in adults ( 1.1) . Eradication of Helicobacter pylorito reduce the risk of duodenal ulcer recurrence in adults ( 1.2) . Treatment of active benign gastric ulcer in adults ( 1.3) . Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) . Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) . Pathologic hypersecretory conditions in adults ( 1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42 g/mol. The structural formula is:. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac.</Description>
</NDC>
<NDC>
<NDCCode>0220-1396-41</NDCCode>
<PackageDescription>30 [hp_C] in 1 TUBE (0220-1396-41) </PackageDescription>
<NDC11Code>00220-1396-41</NDC11Code>
<ProductNDC>0220-1396</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cinchona Officinalis</ProprietaryName>
<NonProprietaryName>Cinchona Officinalis Bark</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Boiron</LabelerName>
<SubstanceName>CINCHONA OFFICINALIS BARK</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/30[hp_C]</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19830303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves symptoms of diarrheas such as: 1 bloating, 2 gas, 3 fatigue, 4 physical weakness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0220-1396-43</NDCCode>
<PackageDescription>3 TUBE in 1 BOX (0220-1396-43) / 30 [hp_C] in 1 TUBE</PackageDescription>
<NDC11Code>00220-1396-43</NDC11Code>
<ProductNDC>0220-1396</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cinchona Officinalis</ProprietaryName>
<NonProprietaryName>Cinchona Officinalis Bark</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Boiron</LabelerName>
<SubstanceName>CINCHONA OFFICINALIS BARK</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/30[hp_C]</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves symptoms of diarrheas such as: 1 bloating, 2 gas, 3 fatigue, 4 physical weakness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0527-1396-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (0527-1396-01) </PackageDescription>
<NDC11Code>00527-1396-01</NDC11Code>
<ProductNDC>0527-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110926</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090695</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects.</IndicationAndUsage>
<Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25 or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue #1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>0527-1396-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE, PLASTIC (0527-1396-10) </PackageDescription>
<NDC11Code>00527-1396-10</NDC11Code>
<ProductNDC>0527-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110926</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090695</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects.</IndicationAndUsage>
<Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25 or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&C Yellow #10 and FD&C Blue #1. Additionally, the 5 mg capsule contains D&C Red #33, the 10 mg capsule contains D&C Red #33 and D&C Red #28, and the 25 mg capsule contains FD&C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&C Blue #2/indigo carmine aluminum lake, FD&C Red #40/Allurea Red AC aluminum lake, FD&C Blue #1/brilliant Blue FCF aluminum lake, D&C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>22840-1396-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-1396-1) </PackageDescription>
<NDC11Code>22840-1396-01</NDC11Code>
<ProductNDC>22840-1396</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Western Ragweed</ProprietaryName>
<NonProprietaryName>Ambrosia Psilostachya</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>AMBROSIA PSILOSTACHYA POLLEN</SubstanceName>
<StrengthNumber>.001</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>43742-1396-1</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, DROPPER (43742-1396-1) </PackageDescription>
<NDC11Code>43742-1396-01</NDC11Code>
<ProductNDC>43742-1396</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Virus Plus</ProprietaryName>
<NonProprietaryName>Influenzinum (2018-2019), Adenoviren Nosode, Herpes Simplex 1 Nosode, Herpes Simplex 2 Nosode, Cytomegalovirus Nosode, Epstein-barr Virus Nosode, Hepatitis B Nosode, Norovirus Nosode</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181102</StartMarketingDate>
<EndMarketingDate>20231210</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Deseret Biologicals, Inc.</LabelerName>
<SubstanceName>HEPATITIS B VIRUS; HUMAN ADENOVIRUS B SEROTYPE 7 STRAIN 55142 ANTIGEN; HUMAN ADENOVIRUS E SEROTYPE 4 STRAIN CL-68578 ANTIGEN; HUMAN HERPESVIRUS 1; HUMAN HERPESVIRUS 2; HUMAN HERPESVIRUS 4; HUMAN HERPESVIRUS 5; INFLUENZA A VIRUS A/SINGAPORE/GP1908/2015 IVR-180 (H1N1) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/SINGAPORE/INFIMH-16-0019/2016 NIB-104 (H3N2) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/MARYLAND/15/2016 ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/PHUKET/3073/2013 ANTIGEN (FORMALDEHYDE INACTIVATED); NORWALK VIRUS</SubstanceName>
<StrengthNumber>33; 15; 15; 15; 15; 18; 18; 12; 12; 12; 12; 30</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Live Human Adenovirus Type 4 Vaccine [EPC], Live Human Adenovirus Type 7 Vaccine [EPC], Vaccines, Adenovirus [Chemical/Ingredient], Vaccines, Adenovirus [Chemical/Ingredient], Vaccines, Live, Unattenuated [Chemical/Ingredient], Vaccines, Live, Unattenuated [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-12-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181102</StartMarketingDatePackage>
<EndMarketingDatePackage>20231210</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51662-1396-1</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (51662-1396-1) </PackageDescription>
<NDC11Code>51662-1396-01</NDC11Code>
<ProductNDC>51662-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERINEURAL</RouteName>
<StartMarketingDate>20191016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070597</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191016</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine Hydrochloride is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (See WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of 0.75% concentration of Bupivacaine Hydrochloride in these patients. Bupivacaine Hydrochloride is not recommended for intravenous regional anesthesia (Bier Block) (See WARNINGS). The routes of administration and indicated Bupivacaine Hydrochloride concentrations are. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Bupivacaine Hydrochloride.</IndicationAndUsage>
<Description>Bupivacaine Hydrochloride is 2-Piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol. It has the following structural formula. Bupivacaine Hydrochloride is available in sterile isotonic solutions with and without epinephrine (as bitartrate) 1:200,000 for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Solutions of Bupivacaine Hydrochloride may be autoclaved if they do not contain epinephrine. Solutions are clear and colorless. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine Hydrochloride Injection, USP is available in sterile, isotonic solutions containing bupivacaine hydrochloride in water for injection with characteristics as follows. Bupivacaine Hydrochloride Injection, USP (without epinephrine). May contain sodium hydroxide and/or hydrochloric acid for pH adjustment (See HOW SUPPLIED section for pH information). Multiple-dose vials contain methylparaben 1 mg/mL added as a preservative. Bupivacaine and Epinephrine Injection, USP is available in sterile, isotonic solutions containing bupivacaine hydrochloride and epinephrine 1:200,000 with characteristics as follows. Bupivacaine and Epinephrine Injection, USP. Sodium metabisulfite 0.1 mg/mL added as antioxidant and edetate calcium disodium, anhydrous 0.1 mg/mL added as stabilizer. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment (See HOW SUPPLIEDHOW SUPPLIED section for pH information). Multiple-dose vials contain methylparaben 1 mg/mL added as a preservative. Single-use solutions contain no added bacteriostat or anti-microbial agent and unused portions should be discarded after use.</Description>
</NDC>
<NDC>
<NDCCode>51672-1396-3</NDCCode>
<PackageDescription>1 BOTTLE, SPRAY in 1 CARTON (51672-1396-3) / 30 mL in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>51672-1396-03</NDC11Code>
<ProductNDC>51672-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desoximetasone</ProprietaryName>
<NonProprietaryName>Desoximetasone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130411</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA204141</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESOXIMETASONE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desoximetasone Topical Spray is a corticosteroid indicated for the treatment of plaque psoriasis in patients 18 years of age or older.</IndicationAndUsage>
<Description>Desoximetasone Topical Spray, 0.25% contains desoximetasone as the active ingredient. Desoximetasone is a corticosteroid with the chemical name of pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-, (11β,16α)-. Desoximetasone has the molecular formula of C 22H 29FO 4and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is. Each gram of Desoximetasone Topical Spray contains 2.5 mg of desoximetasone in a clear, colorless liquid with the following inactive ingredients: glyceryl oleate, isopropyl alcohol (23.4%), isopropyl myristate, L-menthol, and mineral oil. Desoximetasone Topical Spray is co-packaged with a manual spray pump for installation by the pharmacist prior to dispensing to patients.</Description>
</NDC>
<NDC>
<NDCCode>51672-1396-4</NDCCode>
<PackageDescription>1 BOTTLE, SPRAY in 1 CARTON (51672-1396-4) / 50 mL in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>51672-1396-04</NDC11Code>
<ProductNDC>51672-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desoximetasone</ProprietaryName>
<NonProprietaryName>Desoximetasone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130411</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA204141</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESOXIMETASONE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desoximetasone Topical Spray is a corticosteroid indicated for the treatment of plaque psoriasis in patients 18 years of age or older.</IndicationAndUsage>
<Description>Desoximetasone Topical Spray, 0.25% contains desoximetasone as the active ingredient. Desoximetasone is a corticosteroid with the chemical name of pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-, (11β,16α)-. Desoximetasone has the molecular formula of C 22H 29FO 4and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is. Each gram of Desoximetasone Topical Spray contains 2.5 mg of desoximetasone in a clear, colorless liquid with the following inactive ingredients: glyceryl oleate, isopropyl alcohol (23.4%), isopropyl myristate, L-menthol, and mineral oil. Desoximetasone Topical Spray is co-packaged with a manual spray pump for installation by the pharmacist prior to dispensing to patients.</Description>
</NDC>
<NDC>
<NDCCode>51672-1396-7</NDCCode>
<PackageDescription>1 BOTTLE, SPRAY in 1 CARTON (51672-1396-7) / 100 mL in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>51672-1396-07</NDC11Code>
<ProductNDC>51672-1396</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desoximetasone</ProprietaryName>
<NonProprietaryName>Desoximetasone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130411</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA204141</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESOXIMETASONE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desoximetasone Topical Spray is a corticosteroid indicated for the treatment of plaque psoriasis in patients 18 years of age or older.</IndicationAndUsage>
<Description>Desoximetasone Topical Spray, 0.25% contains desoximetasone as the active ingredient. Desoximetasone is a corticosteroid with the chemical name of pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-, (11β,16α)-. Desoximetasone has the molecular formula of C 22H 29FO 4and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is. Each gram of Desoximetasone Topical Spray contains 2.5 mg of desoximetasone in a clear, colorless liquid with the following inactive ingredients: glyceryl oleate, isopropyl alcohol (23.4%), isopropyl myristate, L-menthol, and mineral oil. Desoximetasone Topical Spray is co-packaged with a manual spray pump for installation by the pharmacist prior to dispensing to patients.</Description>
</NDC>
<NDC>
<NDCCode>67296-0002-2</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (67296-0002-2) </PackageDescription>
<NDC11Code>67296-0002-02</NDC11Code>
<ProductNDC>67296-0002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA061926</ApplicationNumber>
<LabelerName>Redpharm Drug</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19900930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. , 2 Infections of the Genitourinary Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Escherichia coli, Proteus mirabilis, or Enterococcus faecalis. , 3 Infections of the Skin and Skin Structure:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), Staphylococcusspp., or E. coli. , 4 Infections of the Lower Respiratory Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), S. pneumoniae, Staphylococcusspp., or H. influenzae. .</IndicationAndUsage>
<Description>Amoxicillin, USP is a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin, USP molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Tablets:Each tablet contains 500 mg or 875 mg of amoxicillin, USP as the trihydrate. Each film-coated tablet contains: colloidal silicon dioxide, crospovidone, D&C Yellow No. 10 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, lactose monohydrate, sodium starch glycolate, titanium dioxide and triacetin. For Oral Suspension:Each 5 mL of reconstituted suspension contains 200 mg, 250 mg or 400 mg of amoxicillin, USP as the trihydrate. Each 5 mL of the 200 mg reconstituted suspension contains 0.09 mEq (2.11 mg) of sodium. Each 5 mL of the 250 mg reconstituted suspension contains 0.14 mEq (3.24 mg) of sodium. Each 5 mL of the 400 mg reconstituted suspension contains 0.12 mEq (2.69 mg) of sodium. Inactive ingredients for 200 mg and 400 mg: Colloidal silicon dioxide, FD&C Red No. 40, natural and artificial fruit gum flavor, sodium benzoate, sodium citrate, spray dried mask flavor, sucrose, and xanthan gum. Inactive ingredients for 250 mg: FD&C Red No. 40, mixed berry flavoring, silicon dioxide, sodium benzoate, sodium citrate, sucrose, and xanthan gum. Tablets (Chewable):Each tablet contains 125 mg or 250 mg of amoxicillin, USP as the trihydrate. Inactive ingredients in each 125 mg or 250 mg chewable tablet: cherry flavor, lactose anhydrous, magnesium stearate, mannitol, microcrystalline cellulose, sodium citrate, and sucrose. Capsules:Each capsule, for oral administration, contains 250 mg or 500 mg amoxicillin, USP as the trihydrate. The capsules contain the following inactive ingredients: magnesium stearate and talc. The capsule shell contains D&C Yellow No. 10, FD&C Red No. 40, gelatin, and titanium dioxide. In addition, the 250 mg contains D&C Red No. 28 and FD&C Blue No. 1. The 500 mg may also contain methylparaben, propylparaben, and sodium lauryl sulfate. The printing ink contains black iron oxide, propylene glycol, shellac, and strong ammonia solution. In addition, the 250 mg may contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, and FD&C Red No. 40 Aluminum Lake. The 500 mg may also contain potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0007-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (67296-0007-2)</PackageDescription>
<NDC11Code>67296-0007-02</NDC11Code>
<ProductNDC>67296-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19890503</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula. [cyclobenzaprine hydrochloride structural formula]. C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0016-2</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-0016-2)</PackageDescription>
<NDC11Code>67296-0016-02</NDC11Code>
<ProductNDC>67296-0016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone, Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110303</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA081083</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 750</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGEHydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>DESCRIPTIONHydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5a- Epoxy-3-methoxy-17-methylmorphinan- 6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4’-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Hydrocodone bitartrate and acetaminophen tablets, USP for oral administration are available in the following strengths. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, croscarmellose sodium, crospovidone, magnesium stearate,microcrystalline cellulose, povidone, starch, and stearic acid; except the 7.5mg/325mg, 10 mg/325 mg and 10 mg/500 mg tablets do not contain anhydrous lactose. The 7.5 mg/325 mg tablets include FD and C Yellow # 6 Aluminum Lake; the 7.5 mg/650 mg tablets include FD and C Red #40 Aluminum Lake; the 10 mg/325 mg and 10 mg/750 mg tablets include D and C Yellow # 10 Aluminum Lake; the 10 mg/500 mg tablets include FD and C Blue #2 Aluminum Lake; and the 10 mg/650mg tablets include FD and C Blue #1 Aluminum Lake and D and C Yellow #10 Aluminum Lake. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>67296-0020-2</NDCCode>
<PackageDescription>6 TABLET, FILM COATED in 1 BOTTLE (67296-0020-2) </PackageDescription>
<NDC11Code>67296-0020-02</NDC11Code>
<ProductNDC>67296-0020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zithromax</ProprietaryName>
<NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960718</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050711</ApplicationNumber>
<LabelerName>Redpharm Drug</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960718</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
</NDC>
<NDC>
<NDCCode>67296-0023-2</NDCCode>
<PackageDescription>40 CAPSULE in 1 BOTTLE (67296-0023-2)</PackageDescription>
<NDC11Code>67296-0023-02</NDC11Code>
<ProductNDC>67296-0023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100128</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA061926</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Amoxicillin is indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) strains of the designated microorganisms in the conditions listed below. Infections of the ear, nose, and throat - due to Streptococcus spp. (α- and β-hemolytic strains only), S. pneumoniae, Staphylococcus spp., or H. influenzae. Infections of the genitourinary tract - due to E. coli, P. mirabilis, or E. faecalis. Infections of the skin and skin structure - due to Streptococcus spp. (α- and β-hemolytic strains only), Staphylococcus spp., or E. coli. Infections of the lower respiratory tract - due to Streptococcus spp. (α- and β-hemolytic strains only), S. pneumoniae, Staphylococcus spp., or H. influenzae. Gonorrhea, acute uncomplicated (ano-genital and urethral infections) - due to N. gonorrhoeae (males and females). H. pylori eradication to reduce the risk of duodenal ulcer recurrence.</IndicationAndUsage>
<Description>C16H19N3O5S3H2O M.W. 419.45. Each capsule, for oral administration, contains 250 mg or 500 mg amoxicillin as the trihydrate. Inactive Ingredients: CAPSULES-DRUG PRODUCT: magnesium stearate. CAPSULE SHELL AND PRINT CONSTITUENTS: black iron oxide, D and C Yellow No. 10, FD and C Red No. 40, gelatin, propylene glycol, shellac, sodium lauryl sulfate, titanium dioxide, and may also contain D and C Yellow No. 10 Aluminum Lake, FD and C Blue No. 1 Aluminum Lake, FD and C Blue No. 2, FD and C Blue No. 2 Aluminum Lake, FD and C Red No. 40 Aluminum Lake, methylparaben, propylparaben, and silicon dioxide. In addition, the 250 mg capsule shell contains D and C Red No. 28 and FD and C Blue No. 1 and the 500 mg capsule shell may also contain FD and C Blue No 1. After mixing, each 5 mL of amoxicillin suspension, for oral administration, will contain 125 mg or 250 mg of amoxicillin as the trihydrate. Inactive Ingredients: SUSPENSION: FD and C Red No. 40, mixed berry flavoring, silicon dioxide, sodium benzoate, sodium citrate, sucrose, and xanthan gum. Each chewable tablet, for oral administration, contains 125 mg or 250 mg of amoxicillin as the trihydrate. Inactive Ingredients: CHEWABLE TABLETS: cherry flavor, lactose, magnesium stearate, mannitol, microcrystalline cellulose, sodium citrate, and sucrose.</Description>
</NDC>
</NDCList>