{
"NDC": [
{
"NDCCode": "67296-1420-2",
"PackageDescription": "2 mL in 1 CAN (67296-1420-2) ",
"NDC11Code": "67296-1420-02",
"ProductNDC": "67296-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sumatriptan",
"NonProprietaryName": "Sumatriptan",
"DosageFormName": "SPRAY",
"RouteName": "NASAL",
"StartMarketingDate": "20160219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204841",
"LabelerName": "RedPharm Drug",
"SubstanceName": "SUMATRIPTAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/.1mL",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160219",
"SamplePackage": "N",
"IndicationAndUsage": "Sumatriptan nasal spray, USP is indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: 1 Use only if a clear diagnosis of migraine headache has been established. If a patient has no response to the first migraine attack treated with sumatriptan, reconsider the diagnosis of migraine before sumatriptan is administered to treat any subsequent attacks., 2 Sumatriptan is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of sumatriptan nasal spray, USP have not been established for cluster headache.",
"Description": "Sumatriptan nasal spray, USP contains sumatriptan, a selective 5-HT 1B/1Dreceptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure:. The empirical formula is C 14H 21N 3O 2S, representing a molecular weight of 295.4. Sumatriptan is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan nasal spray, USP contains 5 or 20 mg of sumatriptan in a 100-microL unit dose aqueous buffered solution containing purified water USP, sulfuric acid NF, sodium hydroxide NF, monobasic potassium phosphate NF, and anhydrous dibasic sodium phosphate USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5- and 20-mg sumatriptan nasal spray, USP, respectively."
},
{
"NDCCode": "0259-1420-28",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (0259-1420-28) > 14 TABLET in 1 BLISTER PACK (0259-1420-14) ",
"NDC11Code": "00259-1420-28",
"ProductNDC": "0259-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Onmel",
"NonProprietaryName": "Itraconazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121101",
"EndMarketingDate": "20201130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022484",
"LabelerName": "Merz Pharmaceuticals, LLC",
"SubstanceName": "ITRACONAZOLE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC],Azoles [CS],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA],Breast Cancer Resistance Protein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20121101",
"EndMarketingDatePackage": "20201130",
"SamplePackage": "N"
},
{
"NDCCode": "0280-1420-20",
"PackageDescription": "10 POUCH in 1 CARTON (0280-1420-20) > 2 TABLET, EFFERVESCENT in 1 POUCH",
"NDC11Code": "00280-1420-20",
"ProductNDC": "0280-1420",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Alka-seltzer Plus Cold And Cough Formula",
"NonProprietaryName": "Aspirin, Chlorpheniramine Maleate, Dextromethorphan Hydrobromide, And Phenylephrine Bitartrate",
"DosageFormName": "TABLET, EFFERVESCENT",
"RouteName": "ORAL",
"StartMarketingDate": "20080519",
"EndMarketingDate": "20190601",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Bayer HealthCare LLC.",
"SubstanceName": "ASPIRIN; CHLORPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE BITARTRATE",
"StrengthNumber": "325; 2; 10; 7.8",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-06-04",
"ProductNdcExcludeFlag": "N"
},
{
"NDCCode": "0280-1420-26",
"PackageDescription": "13 POUCH in 1 CARTON (0280-1420-26) > 2 TABLET, EFFERVESCENT in 1 POUCH",
"NDC11Code": "00280-1420-26",
"ProductNDC": "0280-1420",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Alka-seltzer Plus Cold And Cough Formula",
"NonProprietaryName": "Aspirin, Chlorpheniramine Maleate, Dextromethorphan Hydrobromide, And Phenylephrine Bitartrate",
"DosageFormName": "TABLET, EFFERVESCENT",
"RouteName": "ORAL",
"StartMarketingDate": "20080519",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Bayer HealthCare LLC.",
"SubstanceName": "ASPIRIN; CHLORPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE BITARTRATE",
"StrengthNumber": "325; 2; 10; 7.8",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-11-15"
},
{
"NDCCode": "22840-1420-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-1420-2) ",
"NDC11Code": "22840-1420-02",
"ProductNDC": "22840-1420",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Oregon Ash Pollen",
"NonProprietaryName": "Fraxinus Latifolia",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "FRAXINUS LATIFOLIA POLLEN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "36987-1420-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1420-2)",
"NDC11Code": "36987-1420-02",
"ProductNDC": "36987-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brussels Sprout",
"NonProprietaryName": "Brussels Sprout",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "BRUSSELS SPROUT",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1420-2",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (37662-1420-2) ",
"NDC11Code": "37662-1420-02",
"ProductNDC": "37662-1420",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ranunculus Bulbosus",
"NonProprietaryName": "Ranunculus Bulbosus",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220824",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "RANUNCULUS BULBOSUS",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220824",
"SamplePackage": "N"
},
{
"NDCCode": "70771-1420-4",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (70771-1420-4) / 10 TABLET, FILM COATED in 1 BLISTER PACK (70771-1420-2) ",
"NDC11Code": "70771-1420-04",
"ProductNDC": "70771-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090459",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190103",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1420-2",
"PackageDescription": "120 TABLET in 1 BOTTLE (71335-1420-2) ",
"NDC11Code": "71335-1420-02",
"ProductNDC": "71335-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140828",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201278",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "10; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200305",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets, USP are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains."
},
{
"NDCCode": "83144-1420-2",
"PackageDescription": "27 g in 1 PACKAGE (83144-1420-2) ",
"NDC11Code": "83144-1420-02",
"ProductNDC": "83144-1420",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "The Classeum Co., Ltd.",
"NonProprietaryName": "Undaria Pinnatifida Extract, Camellia Sinensis Leaf Extract, Morus Alba Bark Extract, Pinus Densiflora Leaf Extract, Artemisia Vulgaris Extract, Sesamum Indicum Seed Extract, Sodium Benzoate",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20221218",
"EndMarketingDate": "20231217",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "The Classeum Co., Ltd",
"SubstanceName": "ADENOSINE; NIACINAMIDE",
"StrengthNumber": ".04; 2",
"StrengthUnit": "g/100g; g/100g",
"Pharm_Classes": "Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20221218",
"EndMarketingDatePackage": "20231217",
"SamplePackage": "N"
},
{
"NDCCode": "0078-1420-15",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0078-1420-15) ",
"NDC11Code": "00078-1420-15",
"ProductNDC": "0078-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vanrafia",
"NonProprietaryName": "Atrasentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250402",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA219208",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ATRASENTAN HYDROCHLORIDE",
"StrengthNumber": ".75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250402",
"SamplePackage": "N",
"IndicationAndUsage": "VANRAFIA is indicated to reduce proteinuria in adults with primary immunoglobulin A nephropathy (IgAN) at risk of rapid disease progression, generally a urine protein-to-creatinine ratio (UPCR) ≥ 1.5 g/g. This indication is approved under accelerated approval based on a reduction of proteinuria [see Clinical Studies (14.1)]. It has not been established whether VANRAFIA slows kidney function decline in patients with IgAN. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory clinical trial.",
"Description": "VANRAFIA contains atrasentan, an endothelin type A (ETA) receptor antagonist. The chemical name of atrasentan hydrochloride is (2R, 3R, 4S)-4-(1,3-benzodioxol-5-yl)-1-[2-(dibutylamino)-2-oxoethyl]-2-(4-methoxyphenyl)-3-pyrrolidinecarboxylic acid hydrochloride. Atrasentan hydrochloride has a molecular weight of 547.09 g/mol, a molecular formula of C29H38N2O6HCl and the following structural formula. Atrasentan is a slightly hygroscopic white to off-white powder that is slightly soluble in water. VANRAFIA is available as a film-coated tablet for oral administration. Each VANRAFIA tablet contains 0.75 mg atrasentan (equivalent to 0.803 mg of atrasentan hydrochloride) and contains the following excipients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, L-cysteine hydrochloride monohydrate, polyethylene glycol, and silicon dioxide."
},
{
"NDCCode": "0363-1420-98",
"PackageDescription": "170 BLISTER PACK in 1 CARTON (0363-1420-98) / 1 GUM, CHEWING in 1 BLISTER PACK",
"NDC11Code": "00363-1420-98",
"ProductNDC": "0363-1420",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine Polacrilex",
"ProprietaryNameSuffix": "Mint",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "GUM, CHEWING",
"RouteName": "BUCCAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076569",
"LabelerName": "Walgreens",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140101",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "0378-1420-77",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0378-1420-77)",
"NDC11Code": "00378-1420-77",
"ProductNDC": "0378-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
"NonProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20121005",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091652",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "100; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-01-24",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0378-1420-93",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0378-1420-93)",
"NDC11Code": "00378-1420-93",
"ProductNDC": "0378-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
"NonProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20121005",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091652",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "100; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-01-24",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0456-1420-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0456-1420-01) ",
"NDC11Code": "00456-1420-01",
"ProductNDC": "0456-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bystolic",
"NonProprietaryName": "Nebivolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021742",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "NEBIVOLOL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080122",
"SamplePackage": "N",
"IndicationAndUsage": "BYSTOLIC is a beta-adrenergic blocking agent indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1).",
"Description": "The chemical name for the active ingredient in BYSTOLIC (nebivolol) tablets is (1RS,1’RS)-1,1’-[(2RS,2’SR)-bis(6-fluoro-3,4-dihydro-2H-1-benzopyran-2-yl)]- 2,2’-iminodiethanol hydrochloride. Nebivolol is a racemate composed of d-Nebivolol and l-Nebivolol with the stereochemical designations of [SRRR]-nebivolol and [RSSS]-nebivolol, respectively. Nebivolol’s molecular formula is (C22H25F2NO4HCl) with the following structural formula. SRRR - or d-nebivolol hydrochloride. RSSS - or l-nebivolol hydrochloride. MW: 441.90 g/mol. Nebivolol hydrochloride is a white to almost white powder that is soluble in methanol, dimethylsulfoxide, and N,N-dimethylformamide, sparingly soluble in ethanol, propylene glycol, and polyethylene glycol, and very slightly soluble in hexane, dichloromethane, and methylbenzene. BYSTOLIC as tablets for oral administration contains nebivolol hydrochloride equivalent to 2.5, 5, 10, and 20 mg of nebivolol base. In addition, BYSTOLIC contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Red #27 Lake, FD&C Blue #2 Lake, FD&C Yellow #6 Lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polysorbate 80, and sodium lauryl sulfate."
},
{
"NDCCode": "0456-1420-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (0456-1420-30) ",
"NDC11Code": "00456-1420-30",
"ProductNDC": "0456-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bystolic",
"NonProprietaryName": "Nebivolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021742",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "NEBIVOLOL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20080122",
"EndMarketingDatePackage": "20231130",
"SamplePackage": "N",
"IndicationAndUsage": "BYSTOLIC is a beta-adrenergic blocking agent indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1).",
"Description": "The chemical name for the active ingredient in BYSTOLIC (nebivolol) tablets is (1RS,1’RS)-1,1’-[(2RS,2’SR)-bis(6-fluoro-3,4-dihydro-2H-1-benzopyran-2-yl)]- 2,2’-iminodiethanol hydrochloride. Nebivolol is a racemate composed of d-Nebivolol and l-Nebivolol with the stereochemical designations of [SRRR]-nebivolol and [RSSS]-nebivolol, respectively. Nebivolol’s molecular formula is (C22H25F2NO4HCl) with the following structural formula. SRRR - or d-nebivolol hydrochloride. RSSS - or l-nebivolol hydrochloride. MW: 441.90 g/mol. Nebivolol hydrochloride is a white to almost white powder that is soluble in methanol, dimethylsulfoxide, and N,N-dimethylformamide, sparingly soluble in ethanol, propylene glycol, and polyethylene glycol, and very slightly soluble in hexane, dichloromethane, and methylbenzene. BYSTOLIC as tablets for oral administration contains nebivolol hydrochloride equivalent to 2.5, 5, 10, and 20 mg of nebivolol base. In addition, BYSTOLIC contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Red #27 Lake, FD&C Blue #2 Lake, FD&C Yellow #6 Lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polysorbate 80, and sodium lauryl sulfate."
},
{
"NDCCode": "0456-1420-63",
"PackageDescription": "100 TABLET in 1 BOX, UNIT-DOSE (0456-1420-63) ",
"NDC11Code": "00456-1420-63",
"ProductNDC": "0456-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bystolic",
"NonProprietaryName": "Nebivolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021742",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "NEBIVOLOL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080122",
"SamplePackage": "N",
"IndicationAndUsage": "BYSTOLIC is a beta-adrenergic blocking agent indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1).",
"Description": "The chemical name for the active ingredient in BYSTOLIC (nebivolol) tablets is (1RS,1’RS)-1,1’-[(2RS,2’SR)-bis(6-fluoro-3,4-dihydro-2H-1-benzopyran-2-yl)]- 2,2’-iminodiethanol hydrochloride. Nebivolol is a racemate composed of d-Nebivolol and l-Nebivolol with the stereochemical designations of [SRRR]-nebivolol and [RSSS]-nebivolol, respectively. Nebivolol’s molecular formula is (C22H25F2NO4HCl) with the following structural formula. SRRR - or d-nebivolol hydrochloride. RSSS - or l-nebivolol hydrochloride. MW: 441.90 g/mol. Nebivolol hydrochloride is a white to almost white powder that is soluble in methanol, dimethylsulfoxide, and N,N-dimethylformamide, sparingly soluble in ethanol, propylene glycol, and polyethylene glycol, and very slightly soluble in hexane, dichloromethane, and methylbenzene. BYSTOLIC as tablets for oral administration contains nebivolol hydrochloride equivalent to 2.5, 5, 10, and 20 mg of nebivolol base. In addition, BYSTOLIC contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Red #27 Lake, FD&C Blue #2 Lake, FD&C Yellow #6 Lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polysorbate 80, and sodium lauryl sulfate."
},
{
"NDCCode": "0456-1420-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (0456-1420-90) ",
"NDC11Code": "00456-1420-90",
"ProductNDC": "0456-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bystolic",
"NonProprietaryName": "Nebivolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021742",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "NEBIVOLOL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080122",
"SamplePackage": "N",
"IndicationAndUsage": "BYSTOLIC is a beta-adrenergic blocking agent indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1).",
"Description": "The chemical name for the active ingredient in BYSTOLIC (nebivolol) tablets is (1RS,1’RS)-1,1’-[(2RS,2’SR)-bis(6-fluoro-3,4-dihydro-2H-1-benzopyran-2-yl)]- 2,2’-iminodiethanol hydrochloride. Nebivolol is a racemate composed of d-Nebivolol and l-Nebivolol with the stereochemical designations of [SRRR]-nebivolol and [RSSS]-nebivolol, respectively. Nebivolol’s molecular formula is (C22H25F2NO4HCl) with the following structural formula. SRRR - or d-nebivolol hydrochloride. RSSS - or l-nebivolol hydrochloride. MW: 441.90 g/mol. Nebivolol hydrochloride is a white to almost white powder that is soluble in methanol, dimethylsulfoxide, and N,N-dimethylformamide, sparingly soluble in ethanol, propylene glycol, and polyethylene glycol, and very slightly soluble in hexane, dichloromethane, and methylbenzene. BYSTOLIC as tablets for oral administration contains nebivolol hydrochloride equivalent to 2.5, 5, 10, and 20 mg of nebivolol base. In addition, BYSTOLIC contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Red #27 Lake, FD&C Blue #2 Lake, FD&C Yellow #6 Lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polysorbate 80, and sodium lauryl sulfate."
},
{
"NDCCode": "0574-1420-21",
"PackageDescription": "21 CAPSULE in 1 BOTTLE (0574-1420-21) ",
"NDC11Code": "00574-1420-21",
"ProductNDC": "0574-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217265",
"LabelerName": "Padagis US LLC",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260131",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide capsules are a thalidomide analogue indicated for the treatment of adult patients with. Multiple myeloma (MM), in combination with dexamethasone (1.1). MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) (1.1). Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2). Limitations of Use. Lenalidomide capsules are not indicated and are not recommended for the treatment of patients with chronic lymphocytic leukemia (CLL) outside of controlled clinical trials (1.6).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H- isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure:. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is a white to slight yellow crystalline powder. It is soluble in organic solvent/water mixtures, and buffered aqueous solvents. Lenalidomide is more soluble in organic solvents and low pH solutions. Solubility was significantly lower in less acidic buffers, ranging from about 0.4 to 0.5 mg/ml. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsules are available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: lactose anhydrous, microcrystalline cellulose, croscarmellose sodium, and magnesium stearate. The 2.5 mg capsule shell contains gelatin, FD&C blue #1, yellow iron oxide, titanium dioxide and black ink. The 5 mg and 25 mg capsule shell contains gelatin, titanium dioxide and black ink. The 10 mg capsule shell contains gelatin, FD&C blue #1, FD&C yellow #6, red iron oxide, yellow iron oxide, titanium dioxide and black ink. The 15 mg capsule shell contains gelatin, FD&C blue #1, titanium dioxide and black ink. The 20 mg capsule shell contains gelatin, FD&C blue #1, yellow iron oxide, titanium dioxide and black ink. The black ink contains dewaxed shellac, black iron oxide and potassium hydroxide."
},
{
"NDCCode": "0832-1420-05",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (0832-1420-05) / 5 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "00832-1420-05",
"ProductNDC": "0832-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brimonidine Tartrate",
"NonProprietaryName": "Brimonidine Tartrate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20240612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216772",
"LabelerName": "Upsher-Smith Laboratories, LLC",
"SubstanceName": "BRIMONIDINE TARTRATE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251115",
"SamplePackage": "N",
"IndicationAndUsage": "Brimonidine tartrate ophthalmic solution 0.15% is an alpha-adrenergic receptor agonist indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma.",
"Description": "Brimonidine tartrate ophthalmic solution 0.15%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (for topical ophthalmic use). The structural formula of brimonidine tartrate is. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. In a solution brimonidine tartrate has a clear, greenish-yellow color. It has an osmolality of 250 to 350 mOsmol/kg and a pH of 6.9 to 7.4. Brimonidine tartrate appears as an off-white to pale-yellow powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution contains the active ingredient brimonidine tartrate 0.15% (1.5 mg/mL) with the inactive ingredients: sodium carboxymethylcellulose, sodium borate, boric acid, sodium chloride, potassium chloride, calcium chloride, magnesium chloride, stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative, purified water, hydrochloric acid and/or sodium hydroxide to adjust pH."
},
{
"NDCCode": "0832-1420-10",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (0832-1420-10) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "00832-1420-10",
"ProductNDC": "0832-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brimonidine Tartrate",
"NonProprietaryName": "Brimonidine Tartrate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20240612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216772",
"LabelerName": "Upsher-Smith Laboratories, LLC",
"SubstanceName": "BRIMONIDINE TARTRATE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251115",
"SamplePackage": "N",
"IndicationAndUsage": "Brimonidine tartrate ophthalmic solution 0.15% is an alpha-adrenergic receptor agonist indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma.",
"Description": "Brimonidine tartrate ophthalmic solution 0.15%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (for topical ophthalmic use). The structural formula of brimonidine tartrate is. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. In a solution brimonidine tartrate has a clear, greenish-yellow color. It has an osmolality of 250 to 350 mOsmol/kg and a pH of 6.9 to 7.4. Brimonidine tartrate appears as an off-white to pale-yellow powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution contains the active ingredient brimonidine tartrate 0.15% (1.5 mg/mL) with the inactive ingredients: sodium carboxymethylcellulose, sodium borate, boric acid, sodium chloride, potassium chloride, calcium chloride, magnesium chloride, stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative, purified water, hydrochloric acid and/or sodium hydroxide to adjust pH."
},
{
"NDCCode": "0832-1420-15",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (0832-1420-15) / 15 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "00832-1420-15",
"ProductNDC": "0832-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brimonidine Tartrate",
"NonProprietaryName": "Brimonidine Tartrate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20240612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216772",
"LabelerName": "Upsher-Smith Laboratories, LLC",
"SubstanceName": "BRIMONIDINE TARTRATE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251115",
"SamplePackage": "N",
"IndicationAndUsage": "Brimonidine tartrate ophthalmic solution 0.15% is an alpha-adrenergic receptor agonist indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma.",
"Description": "Brimonidine tartrate ophthalmic solution 0.15%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (for topical ophthalmic use). The structural formula of brimonidine tartrate is. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. In a solution brimonidine tartrate has a clear, greenish-yellow color. It has an osmolality of 250 to 350 mOsmol/kg and a pH of 6.9 to 7.4. Brimonidine tartrate appears as an off-white to pale-yellow powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution contains the active ingredient brimonidine tartrate 0.15% (1.5 mg/mL) with the inactive ingredients: sodium carboxymethylcellulose, sodium borate, boric acid, sodium chloride, potassium chloride, calcium chloride, magnesium chloride, stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative, purified water, hydrochloric acid and/or sodium hydroxide to adjust pH."
},
{
"NDCCode": "22840-1420-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-1420-4) ",
"NDC11Code": "22840-1420-04",
"ProductNDC": "22840-1420",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Oregon Ash Pollen",
"NonProprietaryName": "Fraxinus Latifolia",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "FRAXINUS LATIFOLIA POLLEN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "50090-1420-0",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50090-1420-0) ",
"NDC11Code": "50090-1420-00",
"ProductNDC": "50090-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202519",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "12.5; 80",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of < 140 mmHg (systolic) and 60% likelihood of achieving < 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on hydrochlorothiazide alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rise to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1΄-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is:Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow."
},
{
"NDCCode": "51662-1420-1",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (51662-1420-1) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "51662-1420-01",
"ProductNDC": "51662-1420",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nalbuphine Hci",
"NonProprietaryName": "Nalbuphine Hci",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20191029",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070915",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "NALBUPHINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Competitive Opioid Antagonists [MoA], Opioid Agonist/Antagonist [EPC], Partial Opioid Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191029",
"SamplePackage": "N",
"IndicationAndUsage": "Nalbuphine Hydrochloride Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Nalbuphine Hydrochloride Injection can also be used as a supplement to balanced anesthesia, for preoperative and postoperative analgesia, and for obstetrical analgesia during labor and delivery. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve Nalbuphine Hydrochloride Injection for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated, or are not expected to be tolerated Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Nalbuphine hydrochloride is a synthetic opioid agonist-antagonist analgesic of the phenanthrene series. It is chemically related to both the widely used opioid antagonist, naloxone, and the potent opioid analgesic, oxymorphone. Chemically nalbuphine hydrochloride is 17-(cyclobutylmethyl)-4,5α-epoxymorphinan-3,6α,14-triol hydrochloride. Nalbuphine hydrochloride molecular weight is 393.91 and is soluble in H2O (35.5 mg/mL at 25°C) and ethanol (0.8%); insoluble in CHCl3 and ether. Nalbuphine hydrochloride has pKa values of 8.71 and 9.96. The molecular formula is C21H27NO4 ∙ HCl. The structural formula is. Nalbuphine Hydrochloride Injection is a sterile, nonpyrogenic solution of nalbuphine hydrochloride in water for injection. This product may be administered by subcutaneous, intramuscular or intravenous injection. Each milliliter (mL) contains nalbuphine hydrochloride 10 mg or 20 mg; sodium citrate, dihydrate 0.47 mg and citric acid, anhydrous 0.63 mg added as buffers and may contain sodium hydroxide and/or hydrochloric acid for pH adjustment; pH 3.7 (3.0 to 4.5). Contains sodium chloride for tonicity adjustment. Multiple-dose vials contain 1.8 mg/mL methylparaben and 0.2 mg/mL propylparaben added as preservatives. Single-dose products contain no bacteriostat or antimicrobial agent and unused portions must be discarded."
},
{
"NDCCode": "52257-1420-1",
"PackageDescription": "60 mL in 1 CARTON (52257-1420-1) ",
"NDC11Code": "52257-1420-01",
"ProductNDC": "52257-1420",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Atomy Sunscreen Beige Broad Spectrum Spf 50 Plus",
"NonProprietaryName": "Homosalate, Octisalate, Titanium Dioxide, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210601",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "ATOMY CO., LTD.",
"SubstanceName": "HOMOSALATE; OCTISALATE; TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "4.5; 2.7; 1.32; 7.62",
"StrengthUnit": "g/60mL; g/60mL; g/60mL; g/60mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Active",
"LastUpdate": "2026-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210601",
"SamplePackage": "N",
"IndicationAndUsage": "Uses. Helps prevent sunburn If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. Other Information: Protect this product from excessive heat and direct sun."
},
{
"NDCCode": "67296-0002-2",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (67296-0002-2) ",
"NDC11Code": "67296-0002-02",
"ProductNDC": "67296-0002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA061926",
"LabelerName": "Redpharm Drug",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2025-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19900930",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. , 2 Infections of the Genitourinary Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Escherichia coli, Proteus mirabilis, or Enterococcus faecalis. , 3 Infections of the Skin and Skin Structure:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), Staphylococcusspp., or E. coli. , 4 Infections of the Lower Respiratory Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), S. pneumoniae, Staphylococcusspp., or H. influenzae. .",
"Description": "Amoxicillin, USP is a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin, USP molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Tablets:Each tablet contains 500 mg or 875 mg of amoxicillin, USP as the trihydrate. Each film-coated tablet contains: colloidal silicon dioxide, crospovidone, D&C Yellow No. 10 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, lactose monohydrate, sodium starch glycolate, titanium dioxide and triacetin. For Oral Suspension:Each 5 mL of reconstituted suspension contains 200 mg, 250 mg or 400 mg of amoxicillin, USP as the trihydrate. Each 5 mL of the 200 mg reconstituted suspension contains 0.09 mEq (2.11 mg) of sodium. Each 5 mL of the 250 mg reconstituted suspension contains 0.14 mEq (3.24 mg) of sodium. Each 5 mL of the 400 mg reconstituted suspension contains 0.12 mEq (2.69 mg) of sodium. Inactive ingredients for 200 mg and 400 mg: Colloidal silicon dioxide, FD&C Red No. 40, natural and artificial fruit gum flavor, sodium benzoate, sodium citrate, spray dried mask flavor, sucrose, and xanthan gum. Inactive ingredients for 250 mg: FD&C Red No. 40, mixed berry flavoring, silicon dioxide, sodium benzoate, sodium citrate, sucrose, and xanthan gum. Tablets (Chewable):Each tablet contains 125 mg or 250 mg of amoxicillin, USP as the trihydrate. Inactive ingredients in each 125 mg or 250 mg chewable tablet: cherry flavor, lactose anhydrous, magnesium stearate, mannitol, microcrystalline cellulose, sodium citrate, and sucrose. Capsules:Each capsule, for oral administration, contains 250 mg or 500 mg amoxicillin, USP as the trihydrate. The capsules contain the following inactive ingredients: magnesium stearate and talc. The capsule shell contains D&C Yellow No. 10, FD&C Red No. 40, gelatin, and titanium dioxide. In addition, the 250 mg contains D&C Red No. 28 and FD&C Blue No. 1. The 500 mg may also contain methylparaben, propylparaben, and sodium lauryl sulfate. The printing ink contains black iron oxide, propylene glycol, shellac, and strong ammonia solution. In addition, the 250 mg may contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, and FD&C Red No. 40 Aluminum Lake. The 500 mg may also contain potassium hydroxide."
},
{
"NDCCode": "67296-0007-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (67296-0007-2)",
"NDC11Code": "67296-0007-02",
"ProductNDC": "67296-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19890503",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula. [cyclobenzaprine hydrochloride structural formula]. C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "67296-0016-2",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-0016-2)",
"NDC11Code": "67296-0016-02",
"ProductNDC": "67296-0016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Acetaminophen",
"NonProprietaryName": "Hydrocodone, Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110303",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA081083",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 750",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGEHydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.",
"Description": "DESCRIPTIONHydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5a- Epoxy-3-methoxy-17-methylmorphinan- 6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4’-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Hydrocodone bitartrate and acetaminophen tablets, USP for oral administration are available in the following strengths. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, croscarmellose sodium, crospovidone, magnesium stearate,microcrystalline cellulose, povidone, starch, and stearic acid; except the 7.5mg/325mg, 10 mg/325 mg and 10 mg/500 mg tablets do not contain anhydrous lactose. The 7.5 mg/325 mg tablets include FD and C Yellow # 6 Aluminum Lake; the 7.5 mg/650 mg tablets include FD and C Red #40 Aluminum Lake; the 10 mg/325 mg and 10 mg/750 mg tablets include D and C Yellow # 10 Aluminum Lake; the 10 mg/500 mg tablets include FD and C Blue #2 Aluminum Lake; and the 10 mg/650mg tablets include FD and C Blue #1 Aluminum Lake and D and C Yellow #10 Aluminum Lake. Meets USP Dissolution Test 1."
},
{
"NDCCode": "67296-0020-2",
"PackageDescription": "6 TABLET, FILM COATED in 1 BOTTLE (67296-0020-2) ",
"NDC11Code": "67296-0020-02",
"ProductNDC": "67296-0020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zithromax",
"NonProprietaryName": "Azithromycin Dihydrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19960718",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050711",
"LabelerName": "Redpharm Drug",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2025-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19960718",
"SamplePackage": "N",
"IndicationAndUsage": "ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67296-1420-2</NDCCode>
<PackageDescription>2 mL in 1 CAN (67296-1420-2) </PackageDescription>
<NDC11Code>67296-1420-02</NDC11Code>
<ProductNDC>67296-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sumatriptan</ProprietaryName>
<NonProprietaryName>Sumatriptan</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20160219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204841</ApplicationNumber>
<LabelerName>RedPharm Drug</LabelerName>
<SubstanceName>SUMATRIPTAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/.1mL</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sumatriptan nasal spray, USP is indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: 1 Use only if a clear diagnosis of migraine headache has been established. If a patient has no response to the first migraine attack treated with sumatriptan, reconsider the diagnosis of migraine before sumatriptan is administered to treat any subsequent attacks., 2 Sumatriptan is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of sumatriptan nasal spray, USP have not been established for cluster headache.</IndicationAndUsage>
<Description>Sumatriptan nasal spray, USP contains sumatriptan, a selective 5-HT 1B/1Dreceptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure:. The empirical formula is C 14H 21N 3O 2S, representing a molecular weight of 295.4. Sumatriptan is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan nasal spray, USP contains 5 or 20 mg of sumatriptan in a 100-microL unit dose aqueous buffered solution containing purified water USP, sulfuric acid NF, sodium hydroxide NF, monobasic potassium phosphate NF, and anhydrous dibasic sodium phosphate USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5- and 20-mg sumatriptan nasal spray, USP, respectively.</Description>
</NDC>
<NDC>
<NDCCode>0259-1420-28</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (0259-1420-28) > 14 TABLET in 1 BLISTER PACK (0259-1420-14) </PackageDescription>
<NDC11Code>00259-1420-28</NDC11Code>
<ProductNDC>0259-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Onmel</ProprietaryName>
<NonProprietaryName>Itraconazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121101</StartMarketingDate>
<EndMarketingDate>20201130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022484</ApplicationNumber>
<LabelerName>Merz Pharmaceuticals, LLC</LabelerName>
<SubstanceName>ITRACONAZOLE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC],Azoles [CS],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA],Breast Cancer Resistance Protein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20121101</StartMarketingDatePackage>
<EndMarketingDatePackage>20201130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0280-1420-20</NDCCode>
<PackageDescription>10 POUCH in 1 CARTON (0280-1420-20) > 2 TABLET, EFFERVESCENT in 1 POUCH</PackageDescription>
<NDC11Code>00280-1420-20</NDC11Code>
<ProductNDC>0280-1420</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Alka-seltzer Plus Cold And Cough Formula</ProprietaryName>
<NonProprietaryName>Aspirin, Chlorpheniramine Maleate, Dextromethorphan Hydrobromide, And Phenylephrine Bitartrate</NonProprietaryName>
<DosageFormName>TABLET, EFFERVESCENT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080519</StartMarketingDate>
<EndMarketingDate>20190601</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC.</LabelerName>
<SubstanceName>ASPIRIN; CHLORPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>325; 2; 10; 7.8</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-06-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
</NDC>
<NDC>
<NDCCode>0280-1420-26</NDCCode>
<PackageDescription>13 POUCH in 1 CARTON (0280-1420-26) > 2 TABLET, EFFERVESCENT in 1 POUCH</PackageDescription>
<NDC11Code>00280-1420-26</NDC11Code>
<ProductNDC>0280-1420</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Alka-seltzer Plus Cold And Cough Formula</ProprietaryName>
<NonProprietaryName>Aspirin, Chlorpheniramine Maleate, Dextromethorphan Hydrobromide, And Phenylephrine Bitartrate</NonProprietaryName>
<DosageFormName>TABLET, EFFERVESCENT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080519</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC.</LabelerName>
<SubstanceName>ASPIRIN; CHLORPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>325; 2; 10; 7.8</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-11-15</LastUpdate>
</NDC>
<NDC>
<NDCCode>22840-1420-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-1420-2) </PackageDescription>
<NDC11Code>22840-1420-02</NDC11Code>
<ProductNDC>22840-1420</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Oregon Ash Pollen</ProprietaryName>
<NonProprietaryName>Fraxinus Latifolia</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>FRAXINUS LATIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>36987-1420-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1420-2)</PackageDescription>
<NDC11Code>36987-1420-02</NDC11Code>
<ProductNDC>36987-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brussels Sprout</ProprietaryName>
<NonProprietaryName>Brussels Sprout</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>BRUSSELS SPROUT</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1420-2</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-1420-2) </PackageDescription>
<NDC11Code>37662-1420-02</NDC11Code>
<ProductNDC>37662-1420</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ranunculus Bulbosus</ProprietaryName>
<NonProprietaryName>Ranunculus Bulbosus</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220824</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>RANUNCULUS BULBOSUS</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220824</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70771-1420-4</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (70771-1420-4) / 10 TABLET, FILM COATED in 1 BLISTER PACK (70771-1420-2) </PackageDescription>
<NDC11Code>70771-1420-04</NDC11Code>
<ProductNDC>70771-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090459</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1420-2</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (71335-1420-2) </PackageDescription>
<NDC11Code>71335-1420-02</NDC11Code>
<ProductNDC>71335-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140828</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201278</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>10; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets, USP are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains.</Description>
</NDC>
<NDC>
<NDCCode>83144-1420-2</NDCCode>
<PackageDescription>27 g in 1 PACKAGE (83144-1420-2) </PackageDescription>
<NDC11Code>83144-1420-02</NDC11Code>
<ProductNDC>83144-1420</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>The Classeum Co., Ltd.</ProprietaryName>
<NonProprietaryName>Undaria Pinnatifida Extract, Camellia Sinensis Leaf Extract, Morus Alba Bark Extract, Pinus Densiflora Leaf Extract, Artemisia Vulgaris Extract, Sesamum Indicum Seed Extract, Sodium Benzoate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20221218</StartMarketingDate>
<EndMarketingDate>20231217</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>The Classeum Co., Ltd</LabelerName>
<SubstanceName>ADENOSINE; NIACINAMIDE</SubstanceName>
<StrengthNumber>.04; 2</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20221218</StartMarketingDatePackage>
<EndMarketingDatePackage>20231217</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0078-1420-15</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0078-1420-15) </PackageDescription>
<NDC11Code>00078-1420-15</NDC11Code>
<ProductNDC>0078-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vanrafia</ProprietaryName>
<NonProprietaryName>Atrasentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250402</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA219208</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ATRASENTAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VANRAFIA is indicated to reduce proteinuria in adults with primary immunoglobulin A nephropathy (IgAN) at risk of rapid disease progression, generally a urine protein-to-creatinine ratio (UPCR) ≥ 1.5 g/g. This indication is approved under accelerated approval based on a reduction of proteinuria [see Clinical Studies (14.1)]. It has not been established whether VANRAFIA slows kidney function decline in patients with IgAN. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory clinical trial.</IndicationAndUsage>
<Description>VANRAFIA contains atrasentan, an endothelin type A (ETA) receptor antagonist. The chemical name of atrasentan hydrochloride is (2R, 3R, 4S)-4-(1,3-benzodioxol-5-yl)-1-[2-(dibutylamino)-2-oxoethyl]-2-(4-methoxyphenyl)-3-pyrrolidinecarboxylic acid hydrochloride. Atrasentan hydrochloride has a molecular weight of 547.09 g/mol, a molecular formula of C29H38N2O6HCl and the following structural formula. Atrasentan is a slightly hygroscopic white to off-white powder that is slightly soluble in water. VANRAFIA is available as a film-coated tablet for oral administration. Each VANRAFIA tablet contains 0.75 mg atrasentan (equivalent to 0.803 mg of atrasentan hydrochloride) and contains the following excipients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, L-cysteine hydrochloride monohydrate, polyethylene glycol, and silicon dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0363-1420-98</NDCCode>
<PackageDescription>170 BLISTER PACK in 1 CARTON (0363-1420-98) / 1 GUM, CHEWING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00363-1420-98</NDC11Code>
<ProductNDC>0363-1420</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine Polacrilex</ProprietaryName>
<ProprietaryNameSuffix>Mint</ProprietaryNameSuffix>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>GUM, CHEWING</DosageFormName>
<RouteName>BUCCAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076569</ApplicationNumber>
<LabelerName>Walgreens</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0378-1420-77</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0378-1420-77)</PackageDescription>
<NDC11Code>00378-1420-77</NDC11Code>
<ProductNDC>0378-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Losartan Potassium And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121005</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091652</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>100; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-24</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0378-1420-93</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0378-1420-93)</PackageDescription>
<NDC11Code>00378-1420-93</NDC11Code>
<ProductNDC>0378-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Losartan Potassium And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121005</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091652</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>100; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-24</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0456-1420-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0456-1420-01) </PackageDescription>
<NDC11Code>00456-1420-01</NDC11Code>
<ProductNDC>0456-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bystolic</ProprietaryName>
<NonProprietaryName>Nebivolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021742</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>NEBIVOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BYSTOLIC is a beta-adrenergic blocking agent indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1).</IndicationAndUsage>
<Description>The chemical name for the active ingredient in BYSTOLIC (nebivolol) tablets is (1RS,1’RS)-1,1’-[(2RS,2’SR)-bis(6-fluoro-3,4-dihydro-2H-1-benzopyran-2-yl)]- 2,2’-iminodiethanol hydrochloride. Nebivolol is a racemate composed of d-Nebivolol and l-Nebivolol with the stereochemical designations of [SRRR]-nebivolol and [RSSS]-nebivolol, respectively. Nebivolol’s molecular formula is (C22H25F2NO4HCl) with the following structural formula. SRRR - or d-nebivolol hydrochloride. RSSS - or l-nebivolol hydrochloride. MW: 441.90 g/mol. Nebivolol hydrochloride is a white to almost white powder that is soluble in methanol, dimethylsulfoxide, and N,N-dimethylformamide, sparingly soluble in ethanol, propylene glycol, and polyethylene glycol, and very slightly soluble in hexane, dichloromethane, and methylbenzene. BYSTOLIC as tablets for oral administration contains nebivolol hydrochloride equivalent to 2.5, 5, 10, and 20 mg of nebivolol base. In addition, BYSTOLIC contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Red #27 Lake, FD&C Blue #2 Lake, FD&C Yellow #6 Lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polysorbate 80, and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>0456-1420-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (0456-1420-30) </PackageDescription>
<NDC11Code>00456-1420-30</NDC11Code>
<ProductNDC>0456-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bystolic</ProprietaryName>
<NonProprietaryName>Nebivolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021742</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>NEBIVOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080122</StartMarketingDatePackage>
<EndMarketingDatePackage>20231130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BYSTOLIC is a beta-adrenergic blocking agent indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1).</IndicationAndUsage>
<Description>The chemical name for the active ingredient in BYSTOLIC (nebivolol) tablets is (1RS,1’RS)-1,1’-[(2RS,2’SR)-bis(6-fluoro-3,4-dihydro-2H-1-benzopyran-2-yl)]- 2,2’-iminodiethanol hydrochloride. Nebivolol is a racemate composed of d-Nebivolol and l-Nebivolol with the stereochemical designations of [SRRR]-nebivolol and [RSSS]-nebivolol, respectively. Nebivolol’s molecular formula is (C22H25F2NO4HCl) with the following structural formula. SRRR - or d-nebivolol hydrochloride. RSSS - or l-nebivolol hydrochloride. MW: 441.90 g/mol. Nebivolol hydrochloride is a white to almost white powder that is soluble in methanol, dimethylsulfoxide, and N,N-dimethylformamide, sparingly soluble in ethanol, propylene glycol, and polyethylene glycol, and very slightly soluble in hexane, dichloromethane, and methylbenzene. BYSTOLIC as tablets for oral administration contains nebivolol hydrochloride equivalent to 2.5, 5, 10, and 20 mg of nebivolol base. In addition, BYSTOLIC contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Red #27 Lake, FD&C Blue #2 Lake, FD&C Yellow #6 Lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polysorbate 80, and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>0456-1420-63</NDCCode>
<PackageDescription>100 TABLET in 1 BOX, UNIT-DOSE (0456-1420-63) </PackageDescription>
<NDC11Code>00456-1420-63</NDC11Code>
<ProductNDC>0456-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bystolic</ProprietaryName>
<NonProprietaryName>Nebivolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021742</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>NEBIVOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BYSTOLIC is a beta-adrenergic blocking agent indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1).</IndicationAndUsage>
<Description>The chemical name for the active ingredient in BYSTOLIC (nebivolol) tablets is (1RS,1’RS)-1,1’-[(2RS,2’SR)-bis(6-fluoro-3,4-dihydro-2H-1-benzopyran-2-yl)]- 2,2’-iminodiethanol hydrochloride. Nebivolol is a racemate composed of d-Nebivolol and l-Nebivolol with the stereochemical designations of [SRRR]-nebivolol and [RSSS]-nebivolol, respectively. Nebivolol’s molecular formula is (C22H25F2NO4HCl) with the following structural formula. SRRR - or d-nebivolol hydrochloride. RSSS - or l-nebivolol hydrochloride. MW: 441.90 g/mol. Nebivolol hydrochloride is a white to almost white powder that is soluble in methanol, dimethylsulfoxide, and N,N-dimethylformamide, sparingly soluble in ethanol, propylene glycol, and polyethylene glycol, and very slightly soluble in hexane, dichloromethane, and methylbenzene. BYSTOLIC as tablets for oral administration contains nebivolol hydrochloride equivalent to 2.5, 5, 10, and 20 mg of nebivolol base. In addition, BYSTOLIC contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Red #27 Lake, FD&C Blue #2 Lake, FD&C Yellow #6 Lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polysorbate 80, and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>0456-1420-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (0456-1420-90) </PackageDescription>
<NDC11Code>00456-1420-90</NDC11Code>
<ProductNDC>0456-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bystolic</ProprietaryName>
<NonProprietaryName>Nebivolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021742</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>NEBIVOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BYSTOLIC is a beta-adrenergic blocking agent indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1).</IndicationAndUsage>
<Description>The chemical name for the active ingredient in BYSTOLIC (nebivolol) tablets is (1RS,1’RS)-1,1’-[(2RS,2’SR)-bis(6-fluoro-3,4-dihydro-2H-1-benzopyran-2-yl)]- 2,2’-iminodiethanol hydrochloride. Nebivolol is a racemate composed of d-Nebivolol and l-Nebivolol with the stereochemical designations of [SRRR]-nebivolol and [RSSS]-nebivolol, respectively. Nebivolol’s molecular formula is (C22H25F2NO4HCl) with the following structural formula. SRRR - or d-nebivolol hydrochloride. RSSS - or l-nebivolol hydrochloride. MW: 441.90 g/mol. Nebivolol hydrochloride is a white to almost white powder that is soluble in methanol, dimethylsulfoxide, and N,N-dimethylformamide, sparingly soluble in ethanol, propylene glycol, and polyethylene glycol, and very slightly soluble in hexane, dichloromethane, and methylbenzene. BYSTOLIC as tablets for oral administration contains nebivolol hydrochloride equivalent to 2.5, 5, 10, and 20 mg of nebivolol base. In addition, BYSTOLIC contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Red #27 Lake, FD&C Blue #2 Lake, FD&C Yellow #6 Lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polysorbate 80, and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>0574-1420-21</NDCCode>
<PackageDescription>21 CAPSULE in 1 BOTTLE (0574-1420-21) </PackageDescription>
<NDC11Code>00574-1420-21</NDC11Code>
<ProductNDC>0574-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217265</ApplicationNumber>
<LabelerName>Padagis US LLC</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide capsules are a thalidomide analogue indicated for the treatment of adult patients with. Multiple myeloma (MM), in combination with dexamethasone (1.1). MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) (1.1). Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2). Limitations of Use. Lenalidomide capsules are not indicated and are not recommended for the treatment of patients with chronic lymphocytic leukemia (CLL) outside of controlled clinical trials (1.6).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H- isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure:. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is a white to slight yellow crystalline powder. It is soluble in organic solvent/water mixtures, and buffered aqueous solvents. Lenalidomide is more soluble in organic solvents and low pH solutions. Solubility was significantly lower in less acidic buffers, ranging from about 0.4 to 0.5 mg/ml. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsules are available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: lactose anhydrous, microcrystalline cellulose, croscarmellose sodium, and magnesium stearate. The 2.5 mg capsule shell contains gelatin, FD&C blue #1, yellow iron oxide, titanium dioxide and black ink. The 5 mg and 25 mg capsule shell contains gelatin, titanium dioxide and black ink. The 10 mg capsule shell contains gelatin, FD&C blue #1, FD&C yellow #6, red iron oxide, yellow iron oxide, titanium dioxide and black ink. The 15 mg capsule shell contains gelatin, FD&C blue #1, titanium dioxide and black ink. The 20 mg capsule shell contains gelatin, FD&C blue #1, yellow iron oxide, titanium dioxide and black ink. The black ink contains dewaxed shellac, black iron oxide and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0832-1420-05</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (0832-1420-05) / 5 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>00832-1420-05</NDC11Code>
<ProductNDC>0832-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brimonidine Tartrate</ProprietaryName>
<NonProprietaryName>Brimonidine Tartrate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20240612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216772</ApplicationNumber>
<LabelerName>Upsher-Smith Laboratories, LLC</LabelerName>
<SubstanceName>BRIMONIDINE TARTRATE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brimonidine tartrate ophthalmic solution 0.15% is an alpha-adrenergic receptor agonist indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma.</IndicationAndUsage>
<Description>Brimonidine tartrate ophthalmic solution 0.15%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (for topical ophthalmic use). The structural formula of brimonidine tartrate is. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. In a solution brimonidine tartrate has a clear, greenish-yellow color. It has an osmolality of 250 to 350 mOsmol/kg and a pH of 6.9 to 7.4. Brimonidine tartrate appears as an off-white to pale-yellow powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution contains the active ingredient brimonidine tartrate 0.15% (1.5 mg/mL) with the inactive ingredients: sodium carboxymethylcellulose, sodium borate, boric acid, sodium chloride, potassium chloride, calcium chloride, magnesium chloride, stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative, purified water, hydrochloric acid and/or sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0832-1420-10</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (0832-1420-10) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>00832-1420-10</NDC11Code>
<ProductNDC>0832-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brimonidine Tartrate</ProprietaryName>
<NonProprietaryName>Brimonidine Tartrate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20240612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216772</ApplicationNumber>
<LabelerName>Upsher-Smith Laboratories, LLC</LabelerName>
<SubstanceName>BRIMONIDINE TARTRATE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brimonidine tartrate ophthalmic solution 0.15% is an alpha-adrenergic receptor agonist indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma.</IndicationAndUsage>
<Description>Brimonidine tartrate ophthalmic solution 0.15%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (for topical ophthalmic use). The structural formula of brimonidine tartrate is. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. In a solution brimonidine tartrate has a clear, greenish-yellow color. It has an osmolality of 250 to 350 mOsmol/kg and a pH of 6.9 to 7.4. Brimonidine tartrate appears as an off-white to pale-yellow powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution contains the active ingredient brimonidine tartrate 0.15% (1.5 mg/mL) with the inactive ingredients: sodium carboxymethylcellulose, sodium borate, boric acid, sodium chloride, potassium chloride, calcium chloride, magnesium chloride, stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative, purified water, hydrochloric acid and/or sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0832-1420-15</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (0832-1420-15) / 15 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>00832-1420-15</NDC11Code>
<ProductNDC>0832-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brimonidine Tartrate</ProprietaryName>
<NonProprietaryName>Brimonidine Tartrate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20240612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216772</ApplicationNumber>
<LabelerName>Upsher-Smith Laboratories, LLC</LabelerName>
<SubstanceName>BRIMONIDINE TARTRATE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brimonidine tartrate ophthalmic solution 0.15% is an alpha-adrenergic receptor agonist indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma.</IndicationAndUsage>
<Description>Brimonidine tartrate ophthalmic solution 0.15%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (for topical ophthalmic use). The structural formula of brimonidine tartrate is. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. In a solution brimonidine tartrate has a clear, greenish-yellow color. It has an osmolality of 250 to 350 mOsmol/kg and a pH of 6.9 to 7.4. Brimonidine tartrate appears as an off-white to pale-yellow powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution contains the active ingredient brimonidine tartrate 0.15% (1.5 mg/mL) with the inactive ingredients: sodium carboxymethylcellulose, sodium borate, boric acid, sodium chloride, potassium chloride, calcium chloride, magnesium chloride, stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative, purified water, hydrochloric acid and/or sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>22840-1420-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-1420-4) </PackageDescription>
<NDC11Code>22840-1420-04</NDC11Code>
<ProductNDC>22840-1420</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Oregon Ash Pollen</ProprietaryName>
<NonProprietaryName>Fraxinus Latifolia</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>FRAXINUS LATIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>50090-1420-0</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50090-1420-0) </PackageDescription>
<NDC11Code>50090-1420-00</NDC11Code>
<ProductNDC>50090-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202519</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>12.5; 80</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of < 140 mmHg (systolic) and 60% likelihood of achieving < 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on hydrochlorothiazide alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rise to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1΄-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is:Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>51662-1420-1</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (51662-1420-1) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>51662-1420-01</NDC11Code>
<ProductNDC>51662-1420</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nalbuphine Hci</ProprietaryName>
<NonProprietaryName>Nalbuphine Hci</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20191029</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070915</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>NALBUPHINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Competitive Opioid Antagonists [MoA], Opioid Agonist/Antagonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nalbuphine Hydrochloride Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Nalbuphine Hydrochloride Injection can also be used as a supplement to balanced anesthesia, for preoperative and postoperative analgesia, and for obstetrical analgesia during labor and delivery. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve Nalbuphine Hydrochloride Injection for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated, or are not expected to be tolerated Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Nalbuphine hydrochloride is a synthetic opioid agonist-antagonist analgesic of the phenanthrene series. It is chemically related to both the widely used opioid antagonist, naloxone, and the potent opioid analgesic, oxymorphone. Chemically nalbuphine hydrochloride is 17-(cyclobutylmethyl)-4,5α-epoxymorphinan-3,6α,14-triol hydrochloride. Nalbuphine hydrochloride molecular weight is 393.91 and is soluble in H2O (35.5 mg/mL at 25°C) and ethanol (0.8%); insoluble in CHCl3 and ether. Nalbuphine hydrochloride has pKa values of 8.71 and 9.96. The molecular formula is C21H27NO4 ∙ HCl. The structural formula is. Nalbuphine Hydrochloride Injection is a sterile, nonpyrogenic solution of nalbuphine hydrochloride in water for injection. This product may be administered by subcutaneous, intramuscular or intravenous injection. Each milliliter (mL) contains nalbuphine hydrochloride 10 mg or 20 mg; sodium citrate, dihydrate 0.47 mg and citric acid, anhydrous 0.63 mg added as buffers and may contain sodium hydroxide and/or hydrochloric acid for pH adjustment; pH 3.7 (3.0 to 4.5). Contains sodium chloride for tonicity adjustment. Multiple-dose vials contain 1.8 mg/mL methylparaben and 0.2 mg/mL propylparaben added as preservatives. Single-dose products contain no bacteriostat or antimicrobial agent and unused portions must be discarded.</Description>
</NDC>
<NDC>
<NDCCode>52257-1420-1</NDCCode>
<PackageDescription>60 mL in 1 CARTON (52257-1420-1) </PackageDescription>
<NDC11Code>52257-1420-01</NDC11Code>
<ProductNDC>52257-1420</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Atomy Sunscreen Beige Broad Spectrum Spf 50 Plus</ProprietaryName>
<NonProprietaryName>Homosalate, Octisalate, Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>ATOMY CO., LTD.</LabelerName>
<SubstanceName>HOMOSALATE; OCTISALATE; TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>4.5; 2.7; 1.32; 7.62</StrengthNumber>
<StrengthUnit>g/60mL; g/60mL; g/60mL; g/60mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses. Helps prevent sunburn If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. Other Information: Protect this product from excessive heat and direct sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67296-0002-2</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (67296-0002-2) </PackageDescription>
<NDC11Code>67296-0002-02</NDC11Code>
<ProductNDC>67296-0002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA061926</ApplicationNumber>
<LabelerName>Redpharm Drug</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19900930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. , 2 Infections of the Genitourinary Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Escherichia coli, Proteus mirabilis, or Enterococcus faecalis. , 3 Infections of the Skin and Skin Structure:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), Staphylococcusspp., or E. coli. , 4 Infections of the Lower Respiratory Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), S. pneumoniae, Staphylococcusspp., or H. influenzae. .</IndicationAndUsage>
<Description>Amoxicillin, USP is a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin, USP molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Tablets:Each tablet contains 500 mg or 875 mg of amoxicillin, USP as the trihydrate. Each film-coated tablet contains: colloidal silicon dioxide, crospovidone, D&C Yellow No. 10 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, lactose monohydrate, sodium starch glycolate, titanium dioxide and triacetin. For Oral Suspension:Each 5 mL of reconstituted suspension contains 200 mg, 250 mg or 400 mg of amoxicillin, USP as the trihydrate. Each 5 mL of the 200 mg reconstituted suspension contains 0.09 mEq (2.11 mg) of sodium. Each 5 mL of the 250 mg reconstituted suspension contains 0.14 mEq (3.24 mg) of sodium. Each 5 mL of the 400 mg reconstituted suspension contains 0.12 mEq (2.69 mg) of sodium. Inactive ingredients for 200 mg and 400 mg: Colloidal silicon dioxide, FD&C Red No. 40, natural and artificial fruit gum flavor, sodium benzoate, sodium citrate, spray dried mask flavor, sucrose, and xanthan gum. Inactive ingredients for 250 mg: FD&C Red No. 40, mixed berry flavoring, silicon dioxide, sodium benzoate, sodium citrate, sucrose, and xanthan gum. Tablets (Chewable):Each tablet contains 125 mg or 250 mg of amoxicillin, USP as the trihydrate. Inactive ingredients in each 125 mg or 250 mg chewable tablet: cherry flavor, lactose anhydrous, magnesium stearate, mannitol, microcrystalline cellulose, sodium citrate, and sucrose. Capsules:Each capsule, for oral administration, contains 250 mg or 500 mg amoxicillin, USP as the trihydrate. The capsules contain the following inactive ingredients: magnesium stearate and talc. The capsule shell contains D&C Yellow No. 10, FD&C Red No. 40, gelatin, and titanium dioxide. In addition, the 250 mg contains D&C Red No. 28 and FD&C Blue No. 1. The 500 mg may also contain methylparaben, propylparaben, and sodium lauryl sulfate. The printing ink contains black iron oxide, propylene glycol, shellac, and strong ammonia solution. In addition, the 250 mg may contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, and FD&C Red No. 40 Aluminum Lake. The 500 mg may also contain potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0007-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (67296-0007-2)</PackageDescription>
<NDC11Code>67296-0007-02</NDC11Code>
<ProductNDC>67296-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19890503</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula. [cyclobenzaprine hydrochloride structural formula]. C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0016-2</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-0016-2)</PackageDescription>
<NDC11Code>67296-0016-02</NDC11Code>
<ProductNDC>67296-0016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone, Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110303</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA081083</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 750</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGEHydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>DESCRIPTIONHydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5a- Epoxy-3-methoxy-17-methylmorphinan- 6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4’-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Hydrocodone bitartrate and acetaminophen tablets, USP for oral administration are available in the following strengths. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, croscarmellose sodium, crospovidone, magnesium stearate,microcrystalline cellulose, povidone, starch, and stearic acid; except the 7.5mg/325mg, 10 mg/325 mg and 10 mg/500 mg tablets do not contain anhydrous lactose. The 7.5 mg/325 mg tablets include FD and C Yellow # 6 Aluminum Lake; the 7.5 mg/650 mg tablets include FD and C Red #40 Aluminum Lake; the 10 mg/325 mg and 10 mg/750 mg tablets include D and C Yellow # 10 Aluminum Lake; the 10 mg/500 mg tablets include FD and C Blue #2 Aluminum Lake; and the 10 mg/650mg tablets include FD and C Blue #1 Aluminum Lake and D and C Yellow #10 Aluminum Lake. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>67296-0020-2</NDCCode>
<PackageDescription>6 TABLET, FILM COATED in 1 BOTTLE (67296-0020-2) </PackageDescription>
<NDC11Code>67296-0020-02</NDC11Code>
<ProductNDC>67296-0020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zithromax</ProprietaryName>
<NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960718</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050711</ApplicationNumber>
<LabelerName>Redpharm Drug</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960718</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
</NDC>
</NDCList>