{
"NDC": [
{
"NDCCode": "67296-1441-2",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (67296-1441-2) ",
"NDC11Code": "67296-1441-02",
"ProductNDC": "67296-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "Redpharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200706",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. FDA approved organic impurities test acceptance criterion differs from the USP organic impurities test acceptance criterion in Cyclobenzaprine Hydrochloride Tablets."
},
{
"NDCCode": "67296-1441-1",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (67296-1441-1) ",
"NDC11Code": "67296-1441-01",
"ProductNDC": "67296-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "Redpharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200706",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. FDA approved organic impurities test acceptance criterion differs from the USP organic impurities test acceptance criterion in Cyclobenzaprine Hydrochloride Tablets."
},
{
"NDCCode": "67296-1441-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (67296-1441-3) ",
"NDC11Code": "67296-1441-03",
"ProductNDC": "67296-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "Redpharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200930",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. FDA approved organic impurities test acceptance criterion differs from the USP organic impurities test acceptance criterion in Cyclobenzaprine Hydrochloride Tablets."
},
{
"NDCCode": "67296-1441-7",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE (67296-1441-7) ",
"NDC11Code": "67296-1441-07",
"ProductNDC": "67296-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "Redpharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200706",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. FDA approved organic impurities test acceptance criterion differs from the USP organic impurities test acceptance criterion in Cyclobenzaprine Hydrochloride Tablets."
},
{
"NDCCode": "67296-1441-8",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (67296-1441-8) ",
"NDC11Code": "67296-1441-08",
"ProductNDC": "67296-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "Redpharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200706",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. FDA approved organic impurities test acceptance criterion differs from the USP organic impurities test acceptance criterion in Cyclobenzaprine Hydrochloride Tablets."
},
{
"NDCCode": "0069-1441-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (0069-1441-25) > 2 mL in 1 VIAL, SINGLE-DOSE (0069-1441-04)",
"NDC11Code": "00069-1441-25",
"ProductNDC": "0069-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20130504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079224",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA],Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-04-09",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "0078-1441-09",
"PackageDescription": "2 kg in 1 BOTTLE (0078-1441-09) ",
"NDC11Code": "00078-1441-09",
"ProductNDC": "0078-1441",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Metreleptin",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20150305",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "METRELEPTIN",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-03-04",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "05-MAR-15"
},
{
"NDCCode": "36987-1441-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1441-2)",
"NDC11Code": "36987-1441-02",
"ProductNDC": "36987-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sweet Corn",
"NonProprietaryName": "Sweet Corn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CORN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Grain Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1441-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-1441-2) ",
"NDC11Code": "37662-1441-02",
"ProductNDC": "37662-1441",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Phytolacca Decandra",
"NonProprietaryName": "Phytolacca Decandra",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220824",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "PHYTOLACCA AMERICANA ROOT",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2022-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220824",
"SamplePackage": "N"
},
{
"NDCCode": "51552-1441-3",
"PackageDescription": "1 KIT in 1 BOX (51552-1441-3) * 9.6 g in 1 CONTAINER (51552-1387-2) * 7.8 g in 1 CONTAINER (51552-1434-2)",
"NDC11Code": "51552-1441-03",
"ProductNDC": "51552-1441",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Metronidazole Benzoate And Syrspend Sf Ph4 Convenience Pack",
"DosageFormName": "KIT",
"StartMarketingDate": "20120102",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Fagron Inc",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "51662-1441-1",
"PackageDescription": "2 mL in 1 VIAL, SINGLE-DOSE (51662-1441-1) ",
"NDC11Code": "51662-1441-01",
"ProductNDC": "51662-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iron Dextran",
"NonProprietaryName": "Iron Dextran",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20191222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017441",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "IRON DEXTRAN",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Iron [CS], Parenteral Iron Replacement [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191222",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous or intramuscular injections of INFeD are indicated for treatment of patients with documented iron deficiency in whom oral administration is unsatisfactory or impossible.",
"Description": "INFeD (Iron Dextran Injection USP) is a dark brown, slightly viscous sterile liquid complex of ferric hydroxide and dextran for intravenous or intramuscular use. Each mL contains the equivalent of 50 mg of elemental iron (as an iron dextran complex), approximately 0.9% sodium chloride, in water for injection. Sodium hydroxide and/or hydrochloric acid may have been used to adjust pH. The pH of the solution is between 4.5 to 7.0. Therapeutic Class: Hematinic."
},
{
"NDCCode": "64942-1441-2",
"PackageDescription": "1 CONTAINER in 1 CARTON (64942-1441-2) / 76 g in 1 CONTAINER (64942-1441-1) ",
"NDC11Code": "64942-1441-02",
"ProductNDC": "64942-1441",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dove",
"ProprietaryNameSuffix": "Clinical Protection Cool Essentials Antiperspirant And Deodorant",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201030",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M019",
"LabelerName": "Conopco Inc. d/b/a Unilever",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "20",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2024-10-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201030",
"SamplePackage": "N",
"IndicationAndUsage": "Uses. reduces underarm wetness extra effective."
},
{
"NDCCode": "71335-1441-2",
"PackageDescription": "60 TABLET in 1 BOTTLE (71335-1441-2) ",
"NDC11Code": "71335-1441-02",
"ProductNDC": "71335-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077690",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20211228",
"SamplePackage": "N",
"IndicationAndUsage": "Quinapril tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with quinapril tablets USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Quinapril tablets USP may be used alone or in combination with thiazide diuretics. Heart Failure. Quinapril tablets USP is indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics and/or digitalis. In using quinapril tablets USP, consideration should be given to the fact that another ACE inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril tablets USP does not have a similar risk (see WARNINGS).",
"Description": "Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1- (ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its empirical formula is C25H30N2O5 HCl and its structural formula is. Quinapril hydrochloride is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets USP contain 5 mg, (equivalent to 5.416 mg Quinapril Hydrochloride), 10 mg (equivalent to 10.832 mg Quinapril Hydrochloride), 20 mg (equivalent to 21.664 mg Quinapril Hydrochloride), or 40 mg (equivalent to 43.328 mg Quinapril Hydrochloride) of quinapril for oral administration. Each film-coated tablet also contains crospovidone, iron oxide yellow, lecithin, magnesium carbonate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, povidone, talc, titanium dioxide and xanthan gum."
},
{
"NDCCode": "76119-1441-1",
"PackageDescription": "1 TUBE in 1 BOX (76119-1441-1) > 53.2 mL in 1 TUBE",
"NDC11Code": "76119-1441-01",
"ProductNDC": "76119-1441",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mally Face Defender Foundation Bb",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140203",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "MallyGirl, LLC",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "2.39; 1.59",
"StrengthUnit": "mg/53.2mL; mg/53.2mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Helps prevent sunburn. If used as directed with other sun protection measures (see directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "0069-1441-40",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0069-1441-40) > 20 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00069-1441-40",
"ProductNDC": "0069-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20130504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090648",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA],Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-04-09",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "0536-1441-69",
"PackageDescription": "1 BOTTLE, SPRAY in 1 CARTON (0536-1441-69) / 120 SPRAY, METERED in 1 BOTTLE, SPRAY",
"NDC11Code": "00536-1441-69",
"ProductNDC": "0536-1441",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20240507",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214615",
"LabelerName": "RUGBY LABORATORIES, INC.",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "55",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240507",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily relieves these symptoms of hay fever or other upper respiratory allergies: : 1 nasal congestion, 2 runny nose, 3 sneezing, 4 itchy nose."
},
{
"NDCCode": "22840-1441-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (22840-1441-1) ",
"NDC11Code": "22840-1441-01",
"ProductNDC": "22840-1441",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Australian Pine Beefwood Pollen",
"NonProprietaryName": "Casuarina Equisetifolia",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "CASUARINA EQUISETIFOLIA POLLEN",
"StrengthNumber": ".001",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "53002-1441-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (53002-1441-3) ",
"NDC11Code": "53002-1441-03",
"ProductNDC": "53002-1441",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Montelukast Sodium",
"NonProprietaryName": "Montelukast Sodium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202717",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "MONTELUKAST SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Leukotriene Receptor Antagonist [EPC], Leukotriene Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170901",
"SamplePackage": "N",
"IndicationAndUsage": "Montelukast sodium tablets are a leukotriene receptor antagonist indicated for: 1 Prophylaxis and chronic treatment of asthma in patients 15 years of age and older ( 1.1). , 2 Acute prevention of exercise-induced bronchoconstriction (EIB) in patients 15 years of age and older ( 1.2). , 3 Relief of symptoms of allergic rhinitis (AR): seasonal allergic rhinitis (SAR) in patients 15 years of age and older, and perennial allergic rhinitis (PAR) in patients 15 years of age and older. Reserve use for patients who have an inadequate response or intolerance to alternative therapies ( 1.3). .",
"Description": "Montelukast sodium, the active ingredient in montelukast sodium tablets, is a selective and orally active leukotriene receptor antagonist that inhibits the cysteinyl leukotriene CysLT 1 receptor. Montelukast sodium is described chemically as [ R-( E)]-1-[[[1-[3-[2-(7-chloro-2-quinolinyl)ethenyl]phenyl]-3-[2-(1-hydroxy-1-methylethyl)phenyl]propyl]thio]methyl]cyclopropaneacetic acid, monosodium salt. The empirical formula is C 35H 35ClNNaO 3S, and its molecular weight is 608.18. The structural formula is:. Montelukast sodium is a hygroscopic, optically active, white to off-white powder. Montelukast sodium is freely soluble in ethanol, methanol, and water and practically insoluble in acetonitrile. Each 10-mg film-coated montelukast sodium tablet, USP contains 10.4 mg montelukast sodium, USP, which is equivalent to 10 mg of montelukast, and the following inactive ingredients: microcelac 100, croscarmellose sodium, low substituted hydroxypropyl cellulose, and magnesium stearate. The film coating consists of hypromellose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 6000, iron oxide red and iron oxide yellow."
},
{
"NDCCode": "67296-0002-2",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (67296-0002-2) ",
"NDC11Code": "67296-0002-02",
"ProductNDC": "67296-0002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA061926",
"LabelerName": "Redpharm Drug",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2025-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19900930",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. , 2 Infections of the Genitourinary Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Escherichia coli, Proteus mirabilis, or Enterococcus faecalis. , 3 Infections of the Skin and Skin Structure:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), Staphylococcusspp., or E. coli. , 4 Infections of the Lower Respiratory Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), S. pneumoniae, Staphylococcusspp., or H. influenzae. .",
"Description": "Amoxicillin, USP is a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin, USP molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Tablets:Each tablet contains 500 mg or 875 mg of amoxicillin, USP as the trihydrate. Each film-coated tablet contains: colloidal silicon dioxide, crospovidone, D&C Yellow No. 10 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, lactose monohydrate, sodium starch glycolate, titanium dioxide and triacetin. For Oral Suspension:Each 5 mL of reconstituted suspension contains 200 mg, 250 mg or 400 mg of amoxicillin, USP as the trihydrate. Each 5 mL of the 200 mg reconstituted suspension contains 0.09 mEq (2.11 mg) of sodium. Each 5 mL of the 250 mg reconstituted suspension contains 0.14 mEq (3.24 mg) of sodium. Each 5 mL of the 400 mg reconstituted suspension contains 0.12 mEq (2.69 mg) of sodium. Inactive ingredients for 200 mg and 400 mg: Colloidal silicon dioxide, FD&C Red No. 40, natural and artificial fruit gum flavor, sodium benzoate, sodium citrate, spray dried mask flavor, sucrose, and xanthan gum. Inactive ingredients for 250 mg: FD&C Red No. 40, mixed berry flavoring, silicon dioxide, sodium benzoate, sodium citrate, sucrose, and xanthan gum. Tablets (Chewable):Each tablet contains 125 mg or 250 mg of amoxicillin, USP as the trihydrate. Inactive ingredients in each 125 mg or 250 mg chewable tablet: cherry flavor, lactose anhydrous, magnesium stearate, mannitol, microcrystalline cellulose, sodium citrate, and sucrose. Capsules:Each capsule, for oral administration, contains 250 mg or 500 mg amoxicillin, USP as the trihydrate. The capsules contain the following inactive ingredients: magnesium stearate and talc. The capsule shell contains D&C Yellow No. 10, FD&C Red No. 40, gelatin, and titanium dioxide. In addition, the 250 mg contains D&C Red No. 28 and FD&C Blue No. 1. The 500 mg may also contain methylparaben, propylparaben, and sodium lauryl sulfate. The printing ink contains black iron oxide, propylene glycol, shellac, and strong ammonia solution. In addition, the 250 mg may contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, and FD&C Red No. 40 Aluminum Lake. The 500 mg may also contain potassium hydroxide."
},
{
"NDCCode": "67296-0007-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (67296-0007-2)",
"NDC11Code": "67296-0007-02",
"ProductNDC": "67296-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19890503",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula. [cyclobenzaprine hydrochloride structural formula]. C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "67296-0016-2",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-0016-2)",
"NDC11Code": "67296-0016-02",
"ProductNDC": "67296-0016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Acetaminophen",
"NonProprietaryName": "Hydrocodone, Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110303",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA081083",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 750",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGEHydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.",
"Description": "DESCRIPTIONHydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5a- Epoxy-3-methoxy-17-methylmorphinan- 6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4’-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Hydrocodone bitartrate and acetaminophen tablets, USP for oral administration are available in the following strengths. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, croscarmellose sodium, crospovidone, magnesium stearate,microcrystalline cellulose, povidone, starch, and stearic acid; except the 7.5mg/325mg, 10 mg/325 mg and 10 mg/500 mg tablets do not contain anhydrous lactose. The 7.5 mg/325 mg tablets include FD and C Yellow # 6 Aluminum Lake; the 7.5 mg/650 mg tablets include FD and C Red #40 Aluminum Lake; the 10 mg/325 mg and 10 mg/750 mg tablets include D and C Yellow # 10 Aluminum Lake; the 10 mg/500 mg tablets include FD and C Blue #2 Aluminum Lake; and the 10 mg/650mg tablets include FD and C Blue #1 Aluminum Lake and D and C Yellow #10 Aluminum Lake. Meets USP Dissolution Test 1."
},
{
"NDCCode": "67296-0020-2",
"PackageDescription": "6 TABLET, FILM COATED in 1 BOTTLE (67296-0020-2) ",
"NDC11Code": "67296-0020-02",
"ProductNDC": "67296-0020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zithromax",
"NonProprietaryName": "Azithromycin Dihydrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19960718",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050711",
"LabelerName": "Redpharm Drug",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2025-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19960718",
"SamplePackage": "N",
"IndicationAndUsage": "ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin."
},
{
"NDCCode": "67296-0023-2",
"PackageDescription": "40 CAPSULE in 1 BOTTLE (67296-0023-2)",
"NDC11Code": "67296-0023-02",
"ProductNDC": "67296-0023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100128",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA061926",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Amoxicillin is indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) strains of the designated microorganisms in the conditions listed below. Infections of the ear, nose, and throat - due to Streptococcus spp. (α- and β-hemolytic strains only), S. pneumoniae, Staphylococcus spp., or H. influenzae. Infections of the genitourinary tract - due to E. coli, P. mirabilis, or E. faecalis. Infections of the skin and skin structure - due to Streptococcus spp. (α- and β-hemolytic strains only), Staphylococcus spp., or E. coli. Infections of the lower respiratory tract - due to Streptococcus spp. (α- and β-hemolytic strains only), S. pneumoniae, Staphylococcus spp., or H. influenzae. Gonorrhea, acute uncomplicated (ano-genital and urethral infections) - due to N. gonorrhoeae (males and females). H. pylori eradication to reduce the risk of duodenal ulcer recurrence.",
"Description": "C16H19N3O5S3H2O M.W. 419.45. Each capsule, for oral administration, contains 250 mg or 500 mg amoxicillin as the trihydrate. Inactive Ingredients: CAPSULES-DRUG PRODUCT: magnesium stearate. CAPSULE SHELL AND PRINT CONSTITUENTS: black iron oxide, D and C Yellow No. 10, FD and C Red No. 40, gelatin, propylene glycol, shellac, sodium lauryl sulfate, titanium dioxide, and may also contain D and C Yellow No. 10 Aluminum Lake, FD and C Blue No. 1 Aluminum Lake, FD and C Blue No. 2, FD and C Blue No. 2 Aluminum Lake, FD and C Red No. 40 Aluminum Lake, methylparaben, propylparaben, and silicon dioxide. In addition, the 250 mg capsule shell contains D and C Red No. 28 and FD and C Blue No. 1 and the 500 mg capsule shell may also contain FD and C Blue No 1. After mixing, each 5 mL of amoxicillin suspension, for oral administration, will contain 125 mg or 250 mg of amoxicillin as the trihydrate. Inactive Ingredients: SUSPENSION: FD and C Red No. 40, mixed berry flavoring, silicon dioxide, sodium benzoate, sodium citrate, sucrose, and xanthan gum. Each chewable tablet, for oral administration, contains 125 mg or 250 mg of amoxicillin as the trihydrate. Inactive Ingredients: CHEWABLE TABLETS: cherry flavor, lactose, magnesium stearate, mannitol, microcrystalline cellulose, sodium citrate, and sucrose."
},
{
"NDCCode": "67296-0027-2",
"PackageDescription": "10 TABLET in 1 BOTTLE (67296-0027-2)",
"NDC11Code": "67296-0027-02",
"ProductNDC": "67296-0027",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prochlorperazine Maleate",
"NonProprietaryName": "Prochlorperazine Maleate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040185",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "PROCHLORPERAZINE MALEATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC],Phenothiazines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Prochlorperazine maleate tablets are indicated for the control of severe nausea and vomiting. Prochlorperazine maleate tablets are also indicated for the treatment of schizophrenia. Prochlorperazine is effective for the short-term treatment of generalized non-psychotic anxiety. However, prochlorperazine maleate tablets are not the first drug to be used in therapy for most patients with non-psychotic anxiety, because certain risks associated with its use are not shared by common alternative treatments (e.g., benzodiazepines). When used in the treatment of non-psychotic anxiety, prochlorperazine maleate tablets should not be administered at doses of more than 20 mg per day or for longer than 12 weeks, because the use of prochlorperazine maleate tablets at higher doses or for longer intervals may cause persistent tardive dyskinesia that may prove irreversible (see WARNINGS). The effectiveness of prochlorperazine as treatment for non-psychotic anxiety was established in 4-week clinical studies of outpatients with generalized anxiety disorder. This evidence does not predict that prochlorperazine maleate tablets will be useful in patients with other non-psychotic conditions in which anxiety, or signs that mimic anxiety, are found (e.g., physical illness, organic mental conditions, agitated depression, character pathologies, etc.). Prochlorperazine has not been shown effective in the management of behavioral complications in patients with mental retardation.",
"Description": "Prochlorperazine is a phenothiazine derivative, present in prochlorperazine tablets as the maleate. Prochlorperazine maleate is designated chemically as 2-chloro-10-[3-(4-methyl-1-piperazinyl)propyl] phenothiazine maleate [molecular weight 606.10] and has the following structure. [Prochlorperazine Structural Formula]. C20H24ClN3S2C4H4O4 M.W. 606.10. Prochlorperazine maleate is classified as an anti-emetic and antipsychotic agent. Prochlorperazine maleate is white or pale yellow, practically odorless, crystalline powder. It is practically insoluble in water and in alcohol; slightly soluble in warm chloroform. Each tablet for oral administration contains prochlorperazine maleate, USP equivalent to 5 mg or 10 mg of prochlorperazine and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, titanium dioxide, and triacetin."
},
{
"NDCCode": "67296-0037-2",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (67296-0037-2) ",
"NDC11Code": "67296-0037-02",
"ProductNDC": "67296-0037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062702",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N",
"IndicationAndUsage": "Indications and Usage.",
"Description": "Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin, USP has the following structural formula. C 16H 17N 3O 4SH 2O M.W. 365.41. The nucleus of cephalexin, USP is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin, USP in water is approximately 4.5 to 5. The crystalline form of cephalexin, USP which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin, USP has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: CAPSULES: magnesium stearate, silicon dioxide, and sodium starch glycolate. Capsule Shell and Print Constituents: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze modified in SD-45, silicon dioxide or carboxymethylcellulose sodium, sodium lauryl sulfate, titanium dioxide and may contain propylene glycol. In addition, the 250 mg capsule shell contains yellow iron oxide. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate, USP equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: SUSPENSION: FD&C Red #40, cherry mixed fruit flavor (artificial flavors, benzyl alcohol, maltodextrin, and modified corn starch), silicon dioxide, sodium benzoate, sugar (fruit granulated), and xanthan gum. Each tablet contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: TABLETS: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "67296-0041-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (67296-0041-2)",
"NDC11Code": "67296-0041-02",
"ProductNDC": "67296-0041",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20101007",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088628",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 15",
"StrengthUnit": "mg/1; mg/1",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg or 2 mg of lorazepam. The inactive ingredients present are lactose, magnesium stearate, microcrystalline cellulose and polacrilin potassium."
},
{
"NDCCode": "67296-0044-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (67296-0044-2) ",
"NDC11Code": "67296-0044-02",
"ProductNDC": "67296-0044",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potasium",
"NonProprietaryName": "Penicillin V Potasium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064071",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20010101",
"SamplePackage": "N",
"IndicationAndUsage": "Penicillin V potassium tablets are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal Infections (without bacteremia). Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal Infections. Mild to moderately severe infections of the respiratory tract. Staphylococcal infections – penicillin G-sensitive. Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent’s gingivitis and pharyngitis). Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract1. Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin-VK and other antibacterial drugs, penicillin-VK should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. [Penicillin V Potassium Chemical Structure]. Molecular Formula: C16H17O5KN2S Molecular Weight: 388.5. Penicillin -VK (Penicillin V Potassium Tablets USP), for oral administration, contain 250 mg (400,000 units) or 500 mg (800,000 units) penicillin V. In addition, each tablet contains the following inactive ingredients: hydroxypropyl methylcellulose, magnesium stearate, polyethylene glycol, povidone, talc, and titanium dioxide."
},
{
"NDCCode": "67296-0053-2",
"PackageDescription": "10 TABLET in 1 BOTTLE (67296-0053-2)",
"NDC11Code": "67296-0053-02",
"ProductNDC": "67296-0053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077797",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "67296-0055-2",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE (67296-0055-2)",
"NDC11Code": "67296-0055-02",
"ProductNDC": "67296-0055",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088618",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "HYDROXYZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine hydrochloride has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. C21H27ClN2O2 · 2HCl M. W. 447.83. Hydroxyzine hydrochloride occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine HCl. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide, and triacetin."
},
{
"NDCCode": "67296-0065-2",
"PackageDescription": "10 TABLET in 1 BOTTLE (67296-0065-2) ",
"NDC11Code": "67296-0065-02",
"ProductNDC": "67296-0065",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040419",
"LabelerName": "RedPharm Drug",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20110706",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Have not been tolerated, or are not expected to be tolerated.",
"Description": "Acetaminophen and codeine phosphate tablets are available in tablet form for oral administration. Acetaminophen, 4′-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. [Acetaminophen Chemical Structure]. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. [Codeine Phosphate Chemical Structure]. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/15 mg) contains. Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/30 mg) contains. Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/60 mg) contains. Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg. In addition, each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67296-1441-2</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (67296-1441-2) </PackageDescription>
<NDC11Code>67296-1441-02</NDC11Code>
<ProductNDC>67296-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>Redpharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. FDA approved organic impurities test acceptance criterion differs from the USP organic impurities test acceptance criterion in Cyclobenzaprine Hydrochloride Tablets.</Description>
</NDC>
<NDC>
<NDCCode>67296-1441-1</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (67296-1441-1) </PackageDescription>
<NDC11Code>67296-1441-01</NDC11Code>
<ProductNDC>67296-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>Redpharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. FDA approved organic impurities test acceptance criterion differs from the USP organic impurities test acceptance criterion in Cyclobenzaprine Hydrochloride Tablets.</Description>
</NDC>
<NDC>
<NDCCode>67296-1441-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (67296-1441-3) </PackageDescription>
<NDC11Code>67296-1441-03</NDC11Code>
<ProductNDC>67296-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>Redpharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. FDA approved organic impurities test acceptance criterion differs from the USP organic impurities test acceptance criterion in Cyclobenzaprine Hydrochloride Tablets.</Description>
</NDC>
<NDC>
<NDCCode>67296-1441-7</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (67296-1441-7) </PackageDescription>
<NDC11Code>67296-1441-07</NDC11Code>
<ProductNDC>67296-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>Redpharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. FDA approved organic impurities test acceptance criterion differs from the USP organic impurities test acceptance criterion in Cyclobenzaprine Hydrochloride Tablets.</Description>
</NDC>
<NDC>
<NDCCode>67296-1441-8</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (67296-1441-8) </PackageDescription>
<NDC11Code>67296-1441-08</NDC11Code>
<ProductNDC>67296-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>Redpharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. FDA approved organic impurities test acceptance criterion differs from the USP organic impurities test acceptance criterion in Cyclobenzaprine Hydrochloride Tablets.</Description>
</NDC>
<NDC>
<NDCCode>0069-1441-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (0069-1441-25) > 2 mL in 1 VIAL, SINGLE-DOSE (0069-1441-04)</PackageDescription>
<NDC11Code>00069-1441-25</NDC11Code>
<ProductNDC>0069-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20130504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079224</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA],Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-04-09</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0078-1441-09</NDCCode>
<PackageDescription>2 kg in 1 BOTTLE (0078-1441-09) </PackageDescription>
<NDC11Code>00078-1441-09</NDC11Code>
<ProductNDC>0078-1441</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Metreleptin</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20150305</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>METRELEPTIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-03-04</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>05-MAR-15</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>36987-1441-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1441-2)</PackageDescription>
<NDC11Code>36987-1441-02</NDC11Code>
<ProductNDC>36987-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sweet Corn</ProprietaryName>
<NonProprietaryName>Sweet Corn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CORN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Grain Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1441-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-1441-2) </PackageDescription>
<NDC11Code>37662-1441-02</NDC11Code>
<ProductNDC>37662-1441</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Phytolacca Decandra</ProprietaryName>
<NonProprietaryName>Phytolacca Decandra</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220824</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>PHYTOLACCA AMERICANA ROOT</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220824</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51552-1441-3</NDCCode>
<PackageDescription>1 KIT in 1 BOX (51552-1441-3) * 9.6 g in 1 CONTAINER (51552-1387-2) * 7.8 g in 1 CONTAINER (51552-1434-2)</PackageDescription>
<NDC11Code>51552-1441-03</NDC11Code>
<ProductNDC>51552-1441</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Metronidazole Benzoate And Syrspend Sf Ph4 Convenience Pack</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20120102</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Fagron Inc</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51662-1441-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, SINGLE-DOSE (51662-1441-1) </PackageDescription>
<NDC11Code>51662-1441-01</NDC11Code>
<ProductNDC>51662-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iron Dextran</ProprietaryName>
<NonProprietaryName>Iron Dextran</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20191222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017441</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>IRON DEXTRAN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Iron [CS], Parenteral Iron Replacement [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous or intramuscular injections of INFeD are indicated for treatment of patients with documented iron deficiency in whom oral administration is unsatisfactory or impossible.</IndicationAndUsage>
<Description>INFeD (Iron Dextran Injection USP) is a dark brown, slightly viscous sterile liquid complex of ferric hydroxide and dextran for intravenous or intramuscular use. Each mL contains the equivalent of 50 mg of elemental iron (as an iron dextran complex), approximately 0.9% sodium chloride, in water for injection. Sodium hydroxide and/or hydrochloric acid may have been used to adjust pH. The pH of the solution is between 4.5 to 7.0. Therapeutic Class: Hematinic.</Description>
</NDC>
<NDC>
<NDCCode>64942-1441-2</NDCCode>
<PackageDescription>1 CONTAINER in 1 CARTON (64942-1441-2) / 76 g in 1 CONTAINER (64942-1441-1) </PackageDescription>
<NDC11Code>64942-1441-02</NDC11Code>
<ProductNDC>64942-1441</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dove</ProprietaryName>
<ProprietaryNameSuffix>Clinical Protection Cool Essentials Antiperspirant And Deodorant</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201030</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M019</ApplicationNumber>
<LabelerName>Conopco Inc. d/b/a Unilever</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201030</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses. reduces underarm wetness extra effective.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-1441-2</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71335-1441-2) </PackageDescription>
<NDC11Code>71335-1441-02</NDC11Code>
<ProductNDC>71335-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077690</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quinapril tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with quinapril tablets USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Quinapril tablets USP may be used alone or in combination with thiazide diuretics. Heart Failure. Quinapril tablets USP is indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics and/or digitalis. In using quinapril tablets USP, consideration should be given to the fact that another ACE inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril tablets USP does not have a similar risk (see WARNINGS).</IndicationAndUsage>
<Description>Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1- (ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its empirical formula is C25H30N2O5 HCl and its structural formula is. Quinapril hydrochloride is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets USP contain 5 mg, (equivalent to 5.416 mg Quinapril Hydrochloride), 10 mg (equivalent to 10.832 mg Quinapril Hydrochloride), 20 mg (equivalent to 21.664 mg Quinapril Hydrochloride), or 40 mg (equivalent to 43.328 mg Quinapril Hydrochloride) of quinapril for oral administration. Each film-coated tablet also contains crospovidone, iron oxide yellow, lecithin, magnesium carbonate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, povidone, talc, titanium dioxide and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>76119-1441-1</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (76119-1441-1) > 53.2 mL in 1 TUBE</PackageDescription>
<NDC11Code>76119-1441-01</NDC11Code>
<ProductNDC>76119-1441</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mally Face Defender Foundation Bb</ProprietaryName>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140203</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>MallyGirl, LLC</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>2.39; 1.59</StrengthNumber>
<StrengthUnit>mg/53.2mL; mg/53.2mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn. If used as directed with other sun protection measures (see directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0069-1441-40</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0069-1441-40) > 20 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00069-1441-40</NDC11Code>
<ProductNDC>0069-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20130504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090648</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA],Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-04-09</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0536-1441-69</NDCCode>
<PackageDescription>1 BOTTLE, SPRAY in 1 CARTON (0536-1441-69) / 120 SPRAY, METERED in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>00536-1441-69</NDC11Code>
<ProductNDC>0536-1441</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20240507</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214615</ApplicationNumber>
<LabelerName>RUGBY LABORATORIES, INC.</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>55</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily relieves these symptoms of hay fever or other upper respiratory allergies: : 1 nasal congestion, 2 runny nose, 3 sneezing, 4 itchy nose.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>22840-1441-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-1441-1) </PackageDescription>
<NDC11Code>22840-1441-01</NDC11Code>
<ProductNDC>22840-1441</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Australian Pine Beefwood Pollen</ProprietaryName>
<NonProprietaryName>Casuarina Equisetifolia</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>CASUARINA EQUISETIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.001</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>53002-1441-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (53002-1441-3) </PackageDescription>
<NDC11Code>53002-1441-03</NDC11Code>
<ProductNDC>53002-1441</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Montelukast Sodium</ProprietaryName>
<NonProprietaryName>Montelukast Sodium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202717</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MONTELUKAST SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Leukotriene Receptor Antagonist [EPC], Leukotriene Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Montelukast sodium tablets are a leukotriene receptor antagonist indicated for: 1 Prophylaxis and chronic treatment of asthma in patients 15 years of age and older ( 1.1). , 2 Acute prevention of exercise-induced bronchoconstriction (EIB) in patients 15 years of age and older ( 1.2). , 3 Relief of symptoms of allergic rhinitis (AR): seasonal allergic rhinitis (SAR) in patients 15 years of age and older, and perennial allergic rhinitis (PAR) in patients 15 years of age and older. Reserve use for patients who have an inadequate response or intolerance to alternative therapies ( 1.3). .</IndicationAndUsage>
<Description>Montelukast sodium, the active ingredient in montelukast sodium tablets, is a selective and orally active leukotriene receptor antagonist that inhibits the cysteinyl leukotriene CysLT 1 receptor. Montelukast sodium is described chemically as [ R-( E)]-1-[[[1-[3-[2-(7-chloro-2-quinolinyl)ethenyl]phenyl]-3-[2-(1-hydroxy-1-methylethyl)phenyl]propyl]thio]methyl]cyclopropaneacetic acid, monosodium salt. The empirical formula is C 35H 35ClNNaO 3S, and its molecular weight is 608.18. The structural formula is:. Montelukast sodium is a hygroscopic, optically active, white to off-white powder. Montelukast sodium is freely soluble in ethanol, methanol, and water and practically insoluble in acetonitrile. Each 10-mg film-coated montelukast sodium tablet, USP contains 10.4 mg montelukast sodium, USP, which is equivalent to 10 mg of montelukast, and the following inactive ingredients: microcelac 100, croscarmellose sodium, low substituted hydroxypropyl cellulose, and magnesium stearate. The film coating consists of hypromellose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 6000, iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>67296-0002-2</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (67296-0002-2) </PackageDescription>
<NDC11Code>67296-0002-02</NDC11Code>
<ProductNDC>67296-0002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA061926</ApplicationNumber>
<LabelerName>Redpharm Drug</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19900930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspecies. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcusspp., or Haemophilus influenzae. , 2 Infections of the Genitourinary Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Escherichia coli, Proteus mirabilis, or Enterococcus faecalis. , 3 Infections of the Skin and Skin Structure:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), Staphylococcusspp., or E. coli. , 4 Infections of the Lower Respiratory Tract:Amoxicillin tablets, amoxicillin for oral suspension, amoxicillin tablets (chewable), and amoxicillin capsules are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcusspp. (α- and β-hemolytic isolates only), S. pneumoniae, Staphylococcusspp., or H. influenzae. .</IndicationAndUsage>
<Description>Amoxicillin, USP is a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin, USP molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Tablets:Each tablet contains 500 mg or 875 mg of amoxicillin, USP as the trihydrate. Each film-coated tablet contains: colloidal silicon dioxide, crospovidone, D&C Yellow No. 10 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, lactose monohydrate, sodium starch glycolate, titanium dioxide and triacetin. For Oral Suspension:Each 5 mL of reconstituted suspension contains 200 mg, 250 mg or 400 mg of amoxicillin, USP as the trihydrate. Each 5 mL of the 200 mg reconstituted suspension contains 0.09 mEq (2.11 mg) of sodium. Each 5 mL of the 250 mg reconstituted suspension contains 0.14 mEq (3.24 mg) of sodium. Each 5 mL of the 400 mg reconstituted suspension contains 0.12 mEq (2.69 mg) of sodium. Inactive ingredients for 200 mg and 400 mg: Colloidal silicon dioxide, FD&C Red No. 40, natural and artificial fruit gum flavor, sodium benzoate, sodium citrate, spray dried mask flavor, sucrose, and xanthan gum. Inactive ingredients for 250 mg: FD&C Red No. 40, mixed berry flavoring, silicon dioxide, sodium benzoate, sodium citrate, sucrose, and xanthan gum. Tablets (Chewable):Each tablet contains 125 mg or 250 mg of amoxicillin, USP as the trihydrate. Inactive ingredients in each 125 mg or 250 mg chewable tablet: cherry flavor, lactose anhydrous, magnesium stearate, mannitol, microcrystalline cellulose, sodium citrate, and sucrose. Capsules:Each capsule, for oral administration, contains 250 mg or 500 mg amoxicillin, USP as the trihydrate. The capsules contain the following inactive ingredients: magnesium stearate and talc. The capsule shell contains D&C Yellow No. 10, FD&C Red No. 40, gelatin, and titanium dioxide. In addition, the 250 mg contains D&C Red No. 28 and FD&C Blue No. 1. The 500 mg may also contain methylparaben, propylparaben, and sodium lauryl sulfate. The printing ink contains black iron oxide, propylene glycol, shellac, and strong ammonia solution. In addition, the 250 mg may contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, and FD&C Red No. 40 Aluminum Lake. The 500 mg may also contain potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0007-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (67296-0007-2)</PackageDescription>
<NDC11Code>67296-0007-02</NDC11Code>
<ProductNDC>67296-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19890503</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula. [cyclobenzaprine hydrochloride structural formula]. C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0016-2</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-0016-2)</PackageDescription>
<NDC11Code>67296-0016-02</NDC11Code>
<ProductNDC>67296-0016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone, Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110303</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA081083</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 750</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGEHydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>DESCRIPTIONHydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5a- Epoxy-3-methoxy-17-methylmorphinan- 6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4’-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Hydrocodone bitartrate and acetaminophen tablets, USP for oral administration are available in the following strengths. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, croscarmellose sodium, crospovidone, magnesium stearate,microcrystalline cellulose, povidone, starch, and stearic acid; except the 7.5mg/325mg, 10 mg/325 mg and 10 mg/500 mg tablets do not contain anhydrous lactose. The 7.5 mg/325 mg tablets include FD and C Yellow # 6 Aluminum Lake; the 7.5 mg/650 mg tablets include FD and C Red #40 Aluminum Lake; the 10 mg/325 mg and 10 mg/750 mg tablets include D and C Yellow # 10 Aluminum Lake; the 10 mg/500 mg tablets include FD and C Blue #2 Aluminum Lake; and the 10 mg/650mg tablets include FD and C Blue #1 Aluminum Lake and D and C Yellow #10 Aluminum Lake. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>67296-0020-2</NDCCode>
<PackageDescription>6 TABLET, FILM COATED in 1 BOTTLE (67296-0020-2) </PackageDescription>
<NDC11Code>67296-0020-02</NDC11Code>
<ProductNDC>67296-0020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zithromax</ProprietaryName>
<NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960718</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050711</ApplicationNumber>
<LabelerName>Redpharm Drug</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960718</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
</NDC>
<NDC>
<NDCCode>67296-0023-2</NDCCode>
<PackageDescription>40 CAPSULE in 1 BOTTLE (67296-0023-2)</PackageDescription>
<NDC11Code>67296-0023-02</NDC11Code>
<ProductNDC>67296-0023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100128</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA061926</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Amoxicillin is indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) strains of the designated microorganisms in the conditions listed below. Infections of the ear, nose, and throat - due to Streptococcus spp. (α- and β-hemolytic strains only), S. pneumoniae, Staphylococcus spp., or H. influenzae. Infections of the genitourinary tract - due to E. coli, P. mirabilis, or E. faecalis. Infections of the skin and skin structure - due to Streptococcus spp. (α- and β-hemolytic strains only), Staphylococcus spp., or E. coli. Infections of the lower respiratory tract - due to Streptococcus spp. (α- and β-hemolytic strains only), S. pneumoniae, Staphylococcus spp., or H. influenzae. Gonorrhea, acute uncomplicated (ano-genital and urethral infections) - due to N. gonorrhoeae (males and females). H. pylori eradication to reduce the risk of duodenal ulcer recurrence.</IndicationAndUsage>
<Description>C16H19N3O5S3H2O M.W. 419.45. Each capsule, for oral administration, contains 250 mg or 500 mg amoxicillin as the trihydrate. Inactive Ingredients: CAPSULES-DRUG PRODUCT: magnesium stearate. CAPSULE SHELL AND PRINT CONSTITUENTS: black iron oxide, D and C Yellow No. 10, FD and C Red No. 40, gelatin, propylene glycol, shellac, sodium lauryl sulfate, titanium dioxide, and may also contain D and C Yellow No. 10 Aluminum Lake, FD and C Blue No. 1 Aluminum Lake, FD and C Blue No. 2, FD and C Blue No. 2 Aluminum Lake, FD and C Red No. 40 Aluminum Lake, methylparaben, propylparaben, and silicon dioxide. In addition, the 250 mg capsule shell contains D and C Red No. 28 and FD and C Blue No. 1 and the 500 mg capsule shell may also contain FD and C Blue No 1. After mixing, each 5 mL of amoxicillin suspension, for oral administration, will contain 125 mg or 250 mg of amoxicillin as the trihydrate. Inactive Ingredients: SUSPENSION: FD and C Red No. 40, mixed berry flavoring, silicon dioxide, sodium benzoate, sodium citrate, sucrose, and xanthan gum. Each chewable tablet, for oral administration, contains 125 mg or 250 mg of amoxicillin as the trihydrate. Inactive Ingredients: CHEWABLE TABLETS: cherry flavor, lactose, magnesium stearate, mannitol, microcrystalline cellulose, sodium citrate, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>67296-0027-2</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (67296-0027-2)</PackageDescription>
<NDC11Code>67296-0027-02</NDC11Code>
<ProductNDC>67296-0027</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prochlorperazine Maleate</ProprietaryName>
<NonProprietaryName>Prochlorperazine Maleate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040185</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>PROCHLORPERAZINE MALEATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC],Phenothiazines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prochlorperazine maleate tablets are indicated for the control of severe nausea and vomiting. Prochlorperazine maleate tablets are also indicated for the treatment of schizophrenia. Prochlorperazine is effective for the short-term treatment of generalized non-psychotic anxiety. However, prochlorperazine maleate tablets are not the first drug to be used in therapy for most patients with non-psychotic anxiety, because certain risks associated with its use are not shared by common alternative treatments (e.g., benzodiazepines). When used in the treatment of non-psychotic anxiety, prochlorperazine maleate tablets should not be administered at doses of more than 20 mg per day or for longer than 12 weeks, because the use of prochlorperazine maleate tablets at higher doses or for longer intervals may cause persistent tardive dyskinesia that may prove irreversible (see WARNINGS). The effectiveness of prochlorperazine as treatment for non-psychotic anxiety was established in 4-week clinical studies of outpatients with generalized anxiety disorder. This evidence does not predict that prochlorperazine maleate tablets will be useful in patients with other non-psychotic conditions in which anxiety, or signs that mimic anxiety, are found (e.g., physical illness, organic mental conditions, agitated depression, character pathologies, etc.). Prochlorperazine has not been shown effective in the management of behavioral complications in patients with mental retardation.</IndicationAndUsage>
<Description>Prochlorperazine is a phenothiazine derivative, present in prochlorperazine tablets as the maleate. Prochlorperazine maleate is designated chemically as 2-chloro-10-[3-(4-methyl-1-piperazinyl)propyl] phenothiazine maleate [molecular weight 606.10] and has the following structure. [Prochlorperazine Structural Formula]. C20H24ClN3S2C4H4O4 M.W. 606.10. Prochlorperazine maleate is classified as an anti-emetic and antipsychotic agent. Prochlorperazine maleate is white or pale yellow, practically odorless, crystalline powder. It is practically insoluble in water and in alcohol; slightly soluble in warm chloroform. Each tablet for oral administration contains prochlorperazine maleate, USP equivalent to 5 mg or 10 mg of prochlorperazine and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>67296-0037-2</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (67296-0037-2) </PackageDescription>
<NDC11Code>67296-0037-02</NDC11Code>
<ProductNDC>67296-0037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062702</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indications and Usage.</IndicationAndUsage>
<Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin, USP has the following structural formula. C 16H 17N 3O 4SH 2O M.W. 365.41. The nucleus of cephalexin, USP is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin, USP in water is approximately 4.5 to 5. The crystalline form of cephalexin, USP which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin, USP has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: CAPSULES: magnesium stearate, silicon dioxide, and sodium starch glycolate. Capsule Shell and Print Constituents: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze modified in SD-45, silicon dioxide or carboxymethylcellulose sodium, sodium lauryl sulfate, titanium dioxide and may contain propylene glycol. In addition, the 250 mg capsule shell contains yellow iron oxide. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate, USP equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: SUSPENSION: FD&C Red #40, cherry mixed fruit flavor (artificial flavors, benzyl alcohol, maltodextrin, and modified corn starch), silicon dioxide, sodium benzoate, sugar (fruit granulated), and xanthan gum. Each tablet contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: TABLETS: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0041-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (67296-0041-2)</PackageDescription>
<NDC11Code>67296-0041-02</NDC11Code>
<ProductNDC>67296-0041</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101007</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088628</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 15</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg or 2 mg of lorazepam. The inactive ingredients present are lactose, magnesium stearate, microcrystalline cellulose and polacrilin potassium.</Description>
</NDC>
<NDC>
<NDCCode>67296-0044-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (67296-0044-2) </PackageDescription>
<NDC11Code>67296-0044-02</NDC11Code>
<ProductNDC>67296-0044</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potasium</ProprietaryName>
<NonProprietaryName>Penicillin V Potasium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064071</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Penicillin V potassium tablets are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal Infections (without bacteremia). Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal Infections. Mild to moderately severe infections of the respiratory tract. Staphylococcal infections – penicillin G-sensitive. Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent’s gingivitis and pharyngitis). Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract1. Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin-VK and other antibacterial drugs, penicillin-VK should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. [Penicillin V Potassium Chemical Structure]. Molecular Formula: C16H17O5KN2S Molecular Weight: 388.5. Penicillin -VK (Penicillin V Potassium Tablets USP), for oral administration, contain 250 mg (400,000 units) or 500 mg (800,000 units) penicillin V. In addition, each tablet contains the following inactive ingredients: hydroxypropyl methylcellulose, magnesium stearate, polyethylene glycol, povidone, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0053-2</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (67296-0053-2)</PackageDescription>
<NDC11Code>67296-0053-02</NDC11Code>
<ProductNDC>67296-0053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077797</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0055-2</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (67296-0055-2)</PackageDescription>
<NDC11Code>67296-0055-02</NDC11Code>
<ProductNDC>67296-0055</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088618</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>HYDROXYZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine hydrochloride has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. C21H27ClN2O2 · 2HCl M. W. 447.83. Hydroxyzine hydrochloride occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine HCl. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>67296-0065-2</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (67296-0065-2) </PackageDescription>
<NDC11Code>67296-0065-02</NDC11Code>
<ProductNDC>67296-0065</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040419</ApplicationNumber>
<LabelerName>RedPharm Drug</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Have not been tolerated, or are not expected to be tolerated.</IndicationAndUsage>
<Description>Acetaminophen and codeine phosphate tablets are available in tablet form for oral administration. Acetaminophen, 4′-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. [Acetaminophen Chemical Structure]. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. [Codeine Phosphate Chemical Structure]. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/15 mg) contains. Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/30 mg) contains. Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/60 mg) contains. Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg. In addition, each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid.</Description>
</NDC>
</NDCList>