{
"NDC": [
{
"NDCCode": "67296-1529-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-1529-3) ",
"NDC11Code": "67296-1529-03",
"ProductNDC": "67296-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140303",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203245",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20140303",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Hypertension. Amlodipine besylate tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including amlodipine besylate tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mm Hg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine besylate tablets may be used alone or in combination with other antihypertensive agents. 1.2 Coronary Artery Disease (CAD). Chronic Stable Angina. Amlodipine besylate tablets are indicated for the symptomatic treatment of chronic stable angina. Amlodipine besylate tablets may be used alone or in combination with other antianginal agents. Vasospastic Angina (Prinzmetal's or Variant Angina). Amlodipine besylate tablets are indicated for the treatment of confirmed or suspected vasospastic angina. Amlodipine besylate tablets may be used as monotherapy or in combination with other antianginal agents. Angiographically Documented CAD. In patients with recently documented CAD by angiography and without heart failure or an ejection fraction <40%, amlodipine besylate tablets are indicated to reduce the risk of hospitalization for angina and to reduce the risk of a coronary revascularization procedure.",
"Description": "Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5 pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S and its structural formula is. [Chemical Structure]. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate Tablets are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate."
},
{
"NDCCode": "0115-1529-08",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (0115-1529-08) / 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0115-1529-15) ",
"NDC11Code": "00115-1529-08",
"ProductNDC": "0115-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20150109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200828",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150109",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine is indicated for. Epilepsy—adjunctive therapy in patients aged 2 years and older: 1 partial-onset seizures., 2 primary generalized tonic-clonic seizures., 3 generalized seizures of Lennox-Gastaut syndrome (1.1).",
"Description": "Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Its chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is. Lamotrigine orally disintegrating tablets are supplied for oral administration. The tablets contain 25 mg (white to off-white), 50 mg (white to off-white), 100 mg (white to off-white), or 200 mg (white to off-white) of lamotrigine and the following inactive ingredients: amino methacrylate copolymer, aspartame, black currant flavor, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, pregelatinized maize starch, sodium chloride, and stearic acid. Lamotrigine orally disintegrating tablets are formulated using granulation technology in which the lamotrigine drug substance is granulated with stearic acid and eudragit EPO for taste masking. The formulation contains flavor and has a good mouth feel, no grittiness, no after taste, better palatability and gives a desired dissolution profile."
},
{
"NDCCode": "36987-1529-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1529-3)",
"NDC11Code": "36987-1529-03",
"ProductNDC": "36987-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Almond",
"NonProprietaryName": "Almond",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "ALMOND",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Nut Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1529-3",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (37662-1529-3) ",
"NDC11Code": "37662-1529-03",
"ProductNDC": "37662-1529",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mercurius Iodatus Flavus",
"NonProprietaryName": "Mercurius Iodatus Flavus",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220914",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "MERCUROUS IODIDE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220914",
"SamplePackage": "N"
},
{
"NDCCode": "51662-1529-3",
"PackageDescription": "10 POUCH in 1 BOX (51662-1529-3) / 1 SYRINGE in 1 POUCH (51662-1529-2) / 2 mL in 1 SYRINGE",
"NDC11Code": "51662-1529-03",
"ProductNDC": "51662-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naloxone Hydrochloride",
"NonProprietaryName": "Naloxone Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20210715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213209",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "NALOXONE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220511",
"SamplePackage": "N",
"IndicationAndUsage": "Naloxone hydrochloride injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids, including propoxyphene, methadone and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol and cyclazocine. Naloxone hydrochloride is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone hydrochloride injection may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).",
"Description": "Naloxone hydrochloride, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. NALOXONE HYDROCHLORIDE. (-)-17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride. Naloxone hydrochloride dihydrate occurs as a white to almost white powder, and is freely soluble in water, soluble in ethanol (96%); practically insoluble in toluene. Naloxone hydrochloride injection, USP is available as a sterile solution for intravenous, intramuscular and subcutaneous administration in 1 mg/mL concentration. pH is adjusted to 3.5 ± 0.5 with hydrochloric acid. Each mL also contains 9 mg of sodium chloride. Naloxone hydrochloride injection, USP is preservative-free."
},
{
"NDCCode": "53002-1529-3",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (53002-1529-3) ",
"NDC11Code": "53002-1529-03",
"ProductNDC": "53002-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine",
"NonProprietaryName": "Quetiapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202152",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"Description": "Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f ] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablet, USP is supplied for oral administration as 25 mg (round, pink), 50 mg (round, white to off white), 100 mg (round, yellow), 200 mg (round, white to off white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol, and titanium dioxide. The 25 mg tablets contain iron oxide red and iron oxide yellow and the 100 mg and 400 mg tablets contain only iron oxide yellow. Each 25 mg tablet contains quetiapine fumarate, USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains quetiapine fumarate, USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains quetiapine fumarate, USP equivalent to 100 mg quetiapine. Each 200 mg tablet contains quetiapine fumarate, USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains quetiapine fumarate, USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains quetiapine fumarate, USP equivalent to 400 mg quetiapine."
},
{
"NDCCode": "63629-1529-3",
"PackageDescription": "20 TABLET in 1 BOTTLE (63629-1529-3)",
"NDC11Code": "63629-1529-03",
"ProductNDC": "63629-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040084",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; HYDROCODONE BITARTRATE",
"StrengthNumber": "750; 7.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2015-03-27"
},
{
"NDCCode": "67046-1529-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-1529-3) ",
"NDC11Code": "67046-1529-03",
"ProductNDC": "67046-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250310",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Coupler LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250310",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C 33H 34FN 2O 5) 2Ca3H 2O and its molecular weight is 1209.41. Its structural formula is:. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70771-1529-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (70771-1529-3) ",
"NDC11Code": "70771-1529-03",
"ProductNDC": "70771-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxepin",
"NonProprietaryName": "Doxepin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202761",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "DOXEPIN HYDROCHLORIDE",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240630",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1529-3",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (71335-1529-3) ",
"NDC11Code": "71335-1529-03",
"ProductNDC": "71335-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alfuzosin Hydrochloride",
"NonProprietaryName": "Alfuzosin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20111122",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079057",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ALFUZOSIN HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20211228",
"SamplePackage": "N"
},
{
"NDCCode": "43742-1529-1",
"PackageDescription": "30 mL in 1 BOTTLE, DROPPER (43742-1529-1) ",
"NDC11Code": "43742-1529-01",
"ProductNDC": "43742-1529",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Asthma Plus",
"NonProprietaryName": "Ribes Nigrum, Viburnum Opulus, Quebracho, Blatta Orientalis, Pothos Foetidus, Cinnamic Acid, Gallicum Acidum, Indolum, Quercetin, Rutin, Arsenicum Iodatum, Naphthalinum, Coumarinum, House Dust Mite, Oxygenium, Malvin",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20190905",
"EndMarketingDate": "20250908",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Deseret Biologicals, Inc.",
"SubstanceName": "ARSENIC TRIIODIDE; BLATTA ORIENTALIS; CINNAMIC ACID; COUMARIN; DERMATOPHAGOIDES FARINAE; GALLIC ACID; INDOLE; MALVIN; NAPHTHALENE; OXYGEN; QUEBRACHO BARK; QUERCETIN; RIBES NIGRUM LEAF; RUTIN; SYMPLOCARPUS FOETIDUS ROOT; VIBURNUM OPULUS BARK",
"StrengthNumber": "8; 6; 6; 8; 9; 6; 6; 12; 8; 12; 5; 6; 3; 6; 6; 3",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Non-Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190905",
"EndMarketingDatePackage": "20250908",
"SamplePackage": "N",
"IndicationAndUsage": "For temporary relief of symptoms related to asthma including coughing and wheezing.**. **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration."
},
{
"NDCCode": "50090-1529-0",
"PackageDescription": "30 TABLET in 1 BOTTLE (50090-1529-0) ",
"NDC11Code": "50090-1529-00",
"ProductNDC": "50090-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140303",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203245",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141212",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate tablets are calcium channel blockers and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: 1 Hypertension (1.1)Amlodipine besylate tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions., 2 Coronary Artery Disease (1.2)Chronic Stable AnginaVasospastic Angina (Prinzmetal's or Variant Angina)Angiographically Documented Coronary Artery Disease in patients without heart failure or an ejection fraction < 40%.",
"Description": "Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate Tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate."
},
{
"NDCCode": "50090-1529-1",
"PackageDescription": "90 TABLET in 1 BOTTLE (50090-1529-1) ",
"NDC11Code": "50090-1529-01",
"ProductNDC": "50090-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140303",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203245",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141212",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate tablets are calcium channel blockers and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: 1 Hypertension (1.1)Amlodipine besylate tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions., 2 Coronary Artery Disease (1.2)Chronic Stable AnginaVasospastic Angina (Prinzmetal's or Variant Angina)Angiographically Documented Coronary Artery Disease in patients without heart failure or an ejection fraction < 40%.",
"Description": "Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate Tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate."
},
{
"NDCCode": "51662-1529-1",
"PackageDescription": "1 SYRINGE in 1 BOX (51662-1529-1) / 2 mL in 1 SYRINGE",
"NDC11Code": "51662-1529-01",
"ProductNDC": "51662-1529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naloxone Hydrochloride",
"NonProprietaryName": "Naloxone Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20210715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213209",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "NALOXONE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210715",
"SamplePackage": "N",
"IndicationAndUsage": "Naloxone hydrochloride injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids, including propoxyphene, methadone and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol and cyclazocine. Naloxone hydrochloride is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone hydrochloride injection may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).",
"Description": "Naloxone hydrochloride, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. NALOXONE HYDROCHLORIDE. (-)-17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride. Naloxone hydrochloride dihydrate occurs as a white to almost white powder, and is freely soluble in water, soluble in ethanol (96%); practically insoluble in toluene. Naloxone hydrochloride injection, USP is available as a sterile solution for intravenous, intramuscular and subcutaneous administration in 1 mg/mL concentration. pH is adjusted to 3.5 ± 0.5 with hydrochloric acid. Each mL also contains 9 mg of sodium chloride. Naloxone hydrochloride injection, USP is preservative-free."
},
{
"NDCCode": "67296-0007-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-0007-3)",
"NDC11Code": "67296-0007-03",
"ProductNDC": "67296-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19890503",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula. [cyclobenzaprine hydrochloride structural formula]. C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "67296-0037-3",
"PackageDescription": "40 CAPSULE in 1 BOTTLE (67296-0037-3) ",
"NDC11Code": "67296-0037-03",
"ProductNDC": "67296-0037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062702",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N",
"IndicationAndUsage": "Indications and Usage.",
"Description": "Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin, USP has the following structural formula. C 16H 17N 3O 4SH 2O M.W. 365.41. The nucleus of cephalexin, USP is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin, USP in water is approximately 4.5 to 5. The crystalline form of cephalexin, USP which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin, USP has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: CAPSULES: magnesium stearate, silicon dioxide, and sodium starch glycolate. Capsule Shell and Print Constituents: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze modified in SD-45, silicon dioxide or carboxymethylcellulose sodium, sodium lauryl sulfate, titanium dioxide and may contain propylene glycol. In addition, the 250 mg capsule shell contains yellow iron oxide. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate, USP equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: SUSPENSION: FD&C Red #40, cherry mixed fruit flavor (artificial flavors, benzyl alcohol, maltodextrin, and modified corn starch), silicon dioxide, sodium benzoate, sugar (fruit granulated), and xanthan gum. Each tablet contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: TABLETS: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "67296-0044-3",
"PackageDescription": "28 TABLET in 1 BOTTLE (67296-0044-3) ",
"NDC11Code": "67296-0044-03",
"ProductNDC": "67296-0044",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potasium",
"NonProprietaryName": "Penicillin V Potasium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064071",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20010101",
"SamplePackage": "N",
"IndicationAndUsage": "Penicillin V potassium tablets are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal Infections (without bacteremia). Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal Infections. Mild to moderately severe infections of the respiratory tract. Staphylococcal infections – penicillin G-sensitive. Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent’s gingivitis and pharyngitis). Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract1. Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin-VK and other antibacterial drugs, penicillin-VK should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. [Penicillin V Potassium Chemical Structure]. Molecular Formula: C16H17O5KN2S Molecular Weight: 388.5. Penicillin -VK (Penicillin V Potassium Tablets USP), for oral administration, contain 250 mg (400,000 units) or 500 mg (800,000 units) penicillin V. In addition, each tablet contains the following inactive ingredients: hydroxypropyl methylcellulose, magnesium stearate, polyethylene glycol, povidone, talc, and titanium dioxide."
},
{
"NDCCode": "67296-0053-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-0053-3)",
"NDC11Code": "67296-0053-03",
"ProductNDC": "67296-0053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077797",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "67296-0065-3",
"PackageDescription": "20 TABLET in 1 BOTTLE (67296-0065-3) ",
"NDC11Code": "67296-0065-03",
"ProductNDC": "67296-0065",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040419",
"LabelerName": "RedPharm Drug",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20110706",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Have not been tolerated, or are not expected to be tolerated.",
"Description": "Acetaminophen and codeine phosphate tablets are available in tablet form for oral administration. Acetaminophen, 4′-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. [Acetaminophen Chemical Structure]. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. [Codeine Phosphate Chemical Structure]. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/15 mg) contains. Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/30 mg) contains. Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/60 mg) contains. Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg. In addition, each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid."
},
{
"NDCCode": "67296-0078-3",
"PackageDescription": "21 TABLET in 1 BOTTLE (67296-0078-3) ",
"NDC11Code": "67296-0078-03",
"ProductNDC": "67296-0078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070033",
"LabelerName": "Redpharm Drug, inc.",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]",
"Status": "Active",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19900930",
"SamplePackage": "N",
"IndicationAndUsage": "Metronidazole tablets are indicated for the treatment of T. vaginalis infection in females and males when the presence of the trichomonad has been confirmed by appropriate laboratory procedures (wet smears and/or cultures).",
"Description": "Metronidazole tablets USP, 250 mg or 500 mg is an oral formulation of the synthetic nitroimidazole antimicrobial, 1 H-Imidazole-1-ethanol, 2-methyl-5-nitro, which has the following structural formula:. C 6H 9N 3O 3 M.W. 171.15. Metronidazole tablets, USP contain 250 mg or 500 mg of metronidazole, USP. Inactive ingredients include silicified microcrystalline cellulose, crospovidone, colloidal silicon dioxide and hydrogenated vegetable oil."
},
{
"NDCCode": "67296-0084-3",
"PackageDescription": "10 TABLET in 1 BOTTLE (67296-0084-3) ",
"NDC11Code": "67296-0084-03",
"ProductNDC": "67296-0084",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071321",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20130101",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam Tablets USP are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, Diazepam Tablets USP may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam Tablets USP are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of Diazepam Tablets USP in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam Tablets USP are a benzodiazepine derivative. Chemically, diazepam, USP is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. [Diazepam Structural Formula]. C16H13ClN2O M.W. 284.75. Diazepam Tablets USP are available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 aluminum lake and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1 aluminum lake); magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, and sodium starch glycolate."
},
{
"NDCCode": "67296-0106-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (67296-0106-3)",
"NDC11Code": "67296-0106-03",
"ProductNDC": "67296-0106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100712",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074421",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cyclobenzaprine HCl Tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "C20H21NHCl M.W. 311.9. Each tablet for oral administration contains 10 mg cyclobenzaprine hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, carnauba wax, corn starch, crospovidone, hypromellose, magnesium stearate, pregelatinized starch, polyethylene glycol, polysorbate 80, titanium dioxide, D and C Yellow No.10 aluminum lake, FD and C Blue No.2 aluminum lake, and FD and C Yellow No.6 aluminum lake."
},
{
"NDCCode": "67296-0114-1",
"PackageDescription": "1 TUBE in 1 CARTON (67296-0114-1) / 3.5 g in 1 TUBE",
"NDC11Code": "67296-0114-01",
"ProductNDC": "67296-0114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gentak",
"NonProprietaryName": "Gentamicin Sulfate",
"DosageFormName": "OINTMENT",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20060508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064093",
"LabelerName": "Redpharm Drug",
"SubstanceName": "GENTAMICIN SULFATE",
"StrengthNumber": "3",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20060508",
"SamplePackage": "N",
"IndicationAndUsage": "Gentamicin sulfate ophthalmic ointment is indicated in the topical treatment of ocular bacterial infections including conjunctivitis, keratitis, keratoconjunctivitis, corneal ulcers, blepharitis, blepharonconjunctivitis: acute meibomianitis, and dacryocystitis, caused by susceptible strains of the following microorganisms: 1 Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Streptococcus pneumoniae, Enterobacter aerogenes, Escherichia coli, Haemophilus influenzae, Klebsiella pneumoniae, Neisseria gonorrhoeae, Pseudomonas aeruginosa, and Serratia marcescens.",
"Description": "GENTAK ®Gentamicin sulfate is a water soluble antibiotic of the aminoglycoside group. Gentamicin sulfate ophthalmic ointment is a sterile ointment for ophthalmic use. Each gram contains gentamicin sulfate equivalent to 3 mg gentamicin in a base of white petrolatum and mineral oil, with methylparaben and propylparaben as preservatives. Gentamicin is obtained from cultures of Micromonospora purpurea.It is a mixture of the sulfate salts of gentamicin C 1C 2, and C 1A. All three components appear to have similar antimicrobial activities. Gentamicin sulfate occurs as a white to buff powder and is soluble in water and insoluble in alcohol. The structural formula is as follows:."
},
{
"NDCCode": "67296-0123-3",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (67296-0123-3) ",
"NDC11Code": "67296-0123-03",
"ProductNDC": "67296-0123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20021031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065096",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "875; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20021031",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) and other antibacterial drugs, Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) are combination penicillin-class antibacterials and beta-lactamase inhibitors indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*. 1.1 Lower Respiratory Tract Infections. – caused by beta-lactamase–producing isolates of Haemophilus influenzae and Moraxella catarrhalis. 1.2 Acute Bacterial Otitis Media. – caused by beta-lactamase–producing isolates of H. influenzae and M. catarrhalis. 1.3 Sinusitis. – caused by beta-lactamase–producing isolates of H. influenzae and M. catarrhalis. 1.4 Skin and Skin Structure Infections. – caused by beta-lactamase–producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species. 1.5 Urinary Tract Infections. – caused by beta-lactamase–producing isolates of E. coli, Klebsiella species, and Enterobacter species. 1.6 Limitations of Use. – When susceptibility test results show susceptibility to amoxicillin, USP, indicating no beta-lactamase production, Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) should not be used.",
"Description": "Amoxicillin and Clavulanate Potassium Tablets, Amoxicillin and Clavulanate Potassium for Oral Suspension, and Amoxicillin and Clavulanate Potassium Tablets (Chewable) are oral antibacterial combinations consisting of the semisynthetic antibiotic amoxicillin, USP and the beta-lactamase inhibitor, clavulanate potassium, USP (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. Chemically, amoxicillin, USP is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and has the following structural formula. [amoxicillin structural formula]. C16H19N3O5S3H2O M.W. 419.45. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. Chemically, clavulanate potassium, USP is potassium (Z)-(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and has the following structural formula. [clavulanic acid structural formula]. C8H8KNO5 M.W. 237.25. Amoxicillin and Clavulanate Potassium Tablets USP. Each tablet contains 500 mg or 875 mg amoxicillin, USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each Amoxicillin and Clavulanate Potassium Tablet USP contains 0.63 mEq potassium. Inactive Ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide, and triacetin. Amoxicillin and Clavulanate Potassium for Oral Suspension USP. After reconstitution each teaspoonful (5 mL) of suspension will contain 200 mg amoxicillin, USP as the trihydrate and 28.5 mg clavulanic acid as the potassium salt or 400 mg amoxicillin, USP as the trihydrate and 57 mg clavulanic acid as the potassium salt. Each 5 mL of reconstituted Amoxicillin and Clavulanate Potassium for Oral Suspension USP, 200 mg/28.5 mg per 5 mL contains 0.14 mEq potassium. Each 5 mL of reconstituted Amoxicillin and Clavulanate Potassium for Oral Suspension USP, 400 mg/57 mg per 5 mL contains 0.29 mEq of potassium. Inactive Ingredients: Powder for oral suspension: artificial raspberry powder, aspartame*, citric acid, colloidal silicon dioxide, mannitol, hypromellose, natural orange flavor, sodium citrate, sodium saccharin and xanthan gum. * See Warnings and Precautions (5.6). Amoxicillin and Clavulanate Potassium Tablets USP (Chewable). Each chewable tablet contains 200 mg amoxicillin, USP as the trihydrate and 28.5 mg clavulanic acid as the potassium salt or contains 400 mg amoxicillin, USP as the trihydrate and 57 mg clavulanic acid as the potassium salt. Each Amoxicillin and Clavulanate Potassium Tablet USP, (Chewable) 200 mg/28.5 mg contains 0.14 mEq potassium. Each Amoxicillin and Clavulanate Potassium Tablet USP, (Chewable) 400 mg/57 mg contains 0.29 mEq potassium. Inactive Ingredients: aspartame*, colloidal silicon dioxide, FD&C Red #40 lake, magnesium stearate, mannitol, microcrystalline cellulose, SA84 artificial ripe banana flavor, and artificial cherry flavor powder. * See Warnings and Precautions (5.6)."
},
{
"NDCCode": "67296-0138-3",
"PackageDescription": "20 TABLET in 1 BOTTLE (67296-0138-3) ",
"NDC11Code": "67296-0138-03",
"ProductNDC": "67296-0138",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19900101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085161",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19900101",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets, USP are indicated in the following conditions. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance); congenital adrenal hyperplasia; hypercalcemia associated with cancer; nonsuppurative thyroiditis. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: psoriatic arthritis, rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy), ankylosing spondylitis, acute and subacute bursitis, acute nonspecific tenosynovitis, acute gouty arthritis, post-traumatic osteoarthritis, synovitis of osteoarthritis, epicondylitis. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, systemic dermatomyositis (polymyositis), acute rheumatic carditis. Dermatologic Diseases. Pemphigus; bullous dermatitis herpetiformis; severe erythema multiforme (Stevens-Johnson syndrome); exfoliative dermatitis; mycosis fungoides; severe psoriasis; severe seborrheic dermatitis. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis; bronchial asthma; contact dermatitis; atopic dermatitis; serum sickness; drug hypersensitivity reactions. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: allergic corneal marginal ulcers, herpes zoster ophthalmicus, anterior segment inflammation, diffuse posterior uveitis and choroiditis, sympathetic ophthalmia, allergic conjunctivitis, keratitis, chorioretinitis, optic neuritis, iritis and iridocyclitis. Respiratory Diseases. Symptomatic sarcoidosis; Loeffler’s syndrome not manageable by other means; berylliosis; fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy; aspiration pneumonitis. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults; secondary thrombocytopenia in adults; acquired (autoimmune) hemolytic anemia; erythroblastopenia (RBC anemia); congenital (erythroid) hypoplastic anemia. Neoplastic Diseases. For palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy; trichinosis with neurologic or myocardial involvement.",
"Description": "Prednisone tablets, USP contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate, 17,21-dihydroxy-. The structural formula is represented below. C 21H 26O 5 M.W. 358.44. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg of prednisone, USP (anhydrous). In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, crospovidone, docusate sodium, magnesium stearate and sodium benzoate. Prednisone tablets, USP 20 mg also contain FD&C Yellow No. 6."
},
{
"NDCCode": "67296-0140-3",
"PackageDescription": "42 TABLET in 1 BOTTLE (67296-0140-3) ",
"NDC11Code": "67296-0140-03",
"ProductNDC": "67296-0140",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19871101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085162",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20200422",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets are indicated in the following conditions. Endocrine disorders: primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance); congenital adrenal hyperplasia; hypercalcemia associated with cancer; nonsuppurative thyroiditis. Rheumatic disorders: as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: psoriatic arthritis, rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy), ankylosing spondylitis, acute and subacute bursitis, acute nonspecific tenosynovitis, acute gouty arthritis, post-traumatic osteoarthritis, synovitis of osteoarthritis, epicondylitis. Collagen diseases: during an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, systemic dermatomyositis (polymyositis), acute rheumatic carditis. Dermatologic diseases: pemphigus; bullous dermatitis herpetiformis; severe erythema multiforme (Stevens-Johnson syndrome); exfoliative dermatitis; mycosis fungoides; severe psoriasis; severe seborrheic dermatitis. Allergic states: control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis; bronchial asthma; contact dermatitis; atopic dermatitis; serum sickness; drug hypersensitivity reactions. Ophthalmic diseases: severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: allergic corneal marginal ulcers, herpes zoster ophthalmicus, anterior segment inflammation, diffuse posterior uveitis and choroiditis, sympathetic ophthalmia, allergic conjunctivitis, keratitis, chorioretinitis, optic neuritis, iritis and iridocyclitis. Respiratory diseases: symptomatic sarcoidosis; Loeffler’s syndrome not manageable by other means; berylliosis; fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy; aspiration pneumonitis. Hematologic disorders: idiopathic thrombocytopenic purpura in adults; secondary thrombocytopenia in adults; acquired (autoimmune) hemolytic anemia; erythroblastopenia (RBC anemia); congenital (erythroid) hypoplastic anemia. Neoplastic diseases: for palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous states: to induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal diseases: to tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. Nervous system: acute exacerbations of multiple sclerosis. Miscellaneous: tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy; trichinosis with neurologic or myocardial involvement.",
"Description": "Prednisone tablets contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate, 17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg of prednisone USP (anhydrous). In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, crospovidone, docusate sodium, magnesium stearate and sodium benzoate. Prednisone Tablets USP 20 mg also contain FD and C Yellow No. 6."
},
{
"NDCCode": "67296-0144-3",
"PackageDescription": "14 CAPSULE in 1 BOTTLE (67296-0144-3) ",
"NDC11Code": "67296-0144-03",
"ProductNDC": "67296-0144",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Hydrochloride",
"NonProprietaryName": "Clindamycin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20010323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065061",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "CLINDAMYCIN HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20010323",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin hydrochloride capsules, USP are indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin hydrochloride capsules, USP are also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin hydrochloride capsules, USP are the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules, USP and other antibacterial drugs, clindamycin hydrochloride capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride, USP equivalent to 150 mg or 300 mg of clindamycin. Inactive ingredients: 150 mg - black iron oxide, corn starch, D&C Yellow #10, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide; 300 mg - black iron oxide, corn starch, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide. The structural formula is represented below. [structure]. C18H33ClN2O5SHCl M.W. 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6, 7, 8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride."
},
{
"NDCCode": "67296-0154-3",
"PackageDescription": "5 TABLET, FILM COATED in 1 BOTTLE (67296-0154-3)",
"NDC11Code": "67296-0154-03",
"ProductNDC": "67296-0154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Avelox",
"NonProprietaryName": "Moxifloxacin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110225",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021085",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "MOXIFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of AVELOX and other antibacterial drugs, AVELOX should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. AVELOX Tablets and IV are indicated for the treatment of adults (≥ 18 years of age) with infections caused by susceptible strains of the designated microorganisms in the conditions listed below [see Dosage and Administration (2) and Use In Specific Populations (8.5)]. Culture and Susceptibility Testing. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to moxifloxacin [see Clinical Pharmacology (12.4)]. Therapy with AVELOX may be initiated before results of these tests are known; once results become available, appropriate therapy should be continued.",
"Description": "AVELOX (moxifloxacin hydrochloride) is a synthetic broad spectrum antibacterial agent for oral and intravenous administration. Moxifloxacin, a fluoroquinolone, is available as the monohydrochloride salt of 1-cyclopropyl-7-[(S,S)-2,8-diazabicyclo[4.3.0]non-8-yl]-6-fluoro-8-methoxy-1,4-dihydro-4-oxo-3 quinoline carboxylic acid. It is a slightly yellow to yellow crystalline substance with a molecular weight of 437.9. Its empirical formula is C21H24FN3O4*HCl and its chemical structure is as follows."
},
{
"NDCCode": "67296-0183-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (67296-0183-3) ",
"NDC11Code": "67296-0183-03",
"ProductNDC": "67296-0183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075704",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N"
},
{
"NDCCode": "67296-0222-3",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (67296-0222-3) ",
"NDC11Code": "67296-0222-03",
"ProductNDC": "67296-0222",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Pamoate",
"NonProprietaryName": "Hydroxyzine Pamoate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19811214",
"EndMarketingDate": "20260531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086183",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "HYDROXYZINE PAMOATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200101",
"EndMarketingDatePackage": "20260531",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses, and in histamine-mediated pruritus. As a sedative when used as premedication and following general anesthesia, hydroxyzine may potentiate meperidine (Demerol ®) and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine pamoate is a light yellow, practically odorless powder practically insoluble in water and methanol and freely soluble in dimethylformamide. It is chemically designated as (±)-2-[2-[4-( p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol 4,4’-methylenebis[3-hydroxy-2-naphthoate] (1:1) [10246-75-0] and can be structurally represented as follows:. C 21H 27CIN 2O 2C 23H 16O 6. M.W. 763.27. Each capsule, for oral administration, contains hydroxyzine pamoate equivalent to hydroxyzine hydrochloride 25 mg or 50 mg. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, sodium starch glycolate (potato), and sodium lauryl sulfate. The capsule shell contains the following ingredients: D&C Yellow #10, FD&C Green #3, FD&C Yellow #6, gelatin, and titanium dioxide. The edible imprinting ink contains the following ingredients: black iron oxide, D&C Yellow #10, FD&C Blue #1, FD&C Blue #2, FD&C Red #40, propylene glycol, and shellac glaze."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67296-1529-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-1529-3) </PackageDescription>
<NDC11Code>67296-1529-03</NDC11Code>
<ProductNDC>67296-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140303</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203245</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Hypertension. Amlodipine besylate tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including amlodipine besylate tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mm Hg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine besylate tablets may be used alone or in combination with other antihypertensive agents. 1.2 Coronary Artery Disease (CAD). Chronic Stable Angina. Amlodipine besylate tablets are indicated for the symptomatic treatment of chronic stable angina. Amlodipine besylate tablets may be used alone or in combination with other antianginal agents. Vasospastic Angina (Prinzmetal's or Variant Angina). Amlodipine besylate tablets are indicated for the treatment of confirmed or suspected vasospastic angina. Amlodipine besylate tablets may be used as monotherapy or in combination with other antianginal agents. Angiographically Documented CAD. In patients with recently documented CAD by angiography and without heart failure or an ejection fraction <40%, amlodipine besylate tablets are indicated to reduce the risk of hospitalization for angina and to reduce the risk of a coronary revascularization procedure.</IndicationAndUsage>
<Description>Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5 pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S and its structural formula is. [Chemical Structure]. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate Tablets are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>0115-1529-08</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (0115-1529-08) / 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0115-1529-15) </PackageDescription>
<NDC11Code>00115-1529-08</NDC11Code>
<ProductNDC>0115-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200828</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine is indicated for. Epilepsy—adjunctive therapy in patients aged 2 years and older: 1 partial-onset seizures., 2 primary generalized tonic-clonic seizures., 3 generalized seizures of Lennox-Gastaut syndrome (1.1).</IndicationAndUsage>
<Description>Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Its chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is. Lamotrigine orally disintegrating tablets are supplied for oral administration. The tablets contain 25 mg (white to off-white), 50 mg (white to off-white), 100 mg (white to off-white), or 200 mg (white to off-white) of lamotrigine and the following inactive ingredients: amino methacrylate copolymer, aspartame, black currant flavor, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, pregelatinized maize starch, sodium chloride, and stearic acid. Lamotrigine orally disintegrating tablets are formulated using granulation technology in which the lamotrigine drug substance is granulated with stearic acid and eudragit EPO for taste masking. The formulation contains flavor and has a good mouth feel, no grittiness, no after taste, better palatability and gives a desired dissolution profile.</Description>
</NDC>
<NDC>
<NDCCode>36987-1529-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1529-3)</PackageDescription>
<NDC11Code>36987-1529-03</NDC11Code>
<ProductNDC>36987-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Almond</ProprietaryName>
<NonProprietaryName>Almond</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>ALMOND</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Nut Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1529-3</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (37662-1529-3) </PackageDescription>
<NDC11Code>37662-1529-03</NDC11Code>
<ProductNDC>37662-1529</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mercurius Iodatus Flavus</ProprietaryName>
<NonProprietaryName>Mercurius Iodatus Flavus</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220914</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>MERCUROUS IODIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51662-1529-3</NDCCode>
<PackageDescription>10 POUCH in 1 BOX (51662-1529-3) / 1 SYRINGE in 1 POUCH (51662-1529-2) / 2 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>51662-1529-03</NDC11Code>
<ProductNDC>51662-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naloxone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naloxone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213209</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naloxone hydrochloride injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids, including propoxyphene, methadone and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol and cyclazocine. Naloxone hydrochloride is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone hydrochloride injection may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).</IndicationAndUsage>
<Description>Naloxone hydrochloride, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. NALOXONE HYDROCHLORIDE. (-)-17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride. Naloxone hydrochloride dihydrate occurs as a white to almost white powder, and is freely soluble in water, soluble in ethanol (96%); practically insoluble in toluene. Naloxone hydrochloride injection, USP is available as a sterile solution for intravenous, intramuscular and subcutaneous administration in 1 mg/mL concentration. pH is adjusted to 3.5 ± 0.5 with hydrochloric acid. Each mL also contains 9 mg of sodium chloride. Naloxone hydrochloride injection, USP is preservative-free.</Description>
</NDC>
<NDC>
<NDCCode>53002-1529-3</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (53002-1529-3) </PackageDescription>
<NDC11Code>53002-1529-03</NDC11Code>
<ProductNDC>53002-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine</ProprietaryName>
<NonProprietaryName>Quetiapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202152</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f ] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablet, USP is supplied for oral administration as 25 mg (round, pink), 50 mg (round, white to off white), 100 mg (round, yellow), 200 mg (round, white to off white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol, and titanium dioxide. The 25 mg tablets contain iron oxide red and iron oxide yellow and the 100 mg and 400 mg tablets contain only iron oxide yellow. Each 25 mg tablet contains quetiapine fumarate, USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains quetiapine fumarate, USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains quetiapine fumarate, USP equivalent to 100 mg quetiapine. Each 200 mg tablet contains quetiapine fumarate, USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains quetiapine fumarate, USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains quetiapine fumarate, USP equivalent to 400 mg quetiapine.</Description>
</NDC>
<NDC>
<NDCCode>63629-1529-3</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (63629-1529-3)</PackageDescription>
<NDC11Code>63629-1529-03</NDC11Code>
<ProductNDC>63629-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040084</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
<StrengthNumber>750; 7.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-03-27</LastUpdate>
</NDC>
<NDC>
<NDCCode>67046-1529-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-1529-3) </PackageDescription>
<NDC11Code>67046-1529-03</NDC11Code>
<ProductNDC>67046-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250310</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250310</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C 33H 34FN 2O 5) 2Ca3H 2O and its molecular weight is 1209.41. Its structural formula is:. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70771-1529-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70771-1529-3) </PackageDescription>
<NDC11Code>70771-1529-03</NDC11Code>
<ProductNDC>70771-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxepin</ProprietaryName>
<NonProprietaryName>Doxepin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202761</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1529-3</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (71335-1529-3) </PackageDescription>
<NDC11Code>71335-1529-03</NDC11Code>
<ProductNDC>71335-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alfuzosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Alfuzosin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111122</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079057</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ALFUZOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43742-1529-1</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, DROPPER (43742-1529-1) </PackageDescription>
<NDC11Code>43742-1529-01</NDC11Code>
<ProductNDC>43742-1529</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Asthma Plus</ProprietaryName>
<NonProprietaryName>Ribes Nigrum, Viburnum Opulus, Quebracho, Blatta Orientalis, Pothos Foetidus, Cinnamic Acid, Gallicum Acidum, Indolum, Quercetin, Rutin, Arsenicum Iodatum, Naphthalinum, Coumarinum, House Dust Mite, Oxygenium, Malvin</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190905</StartMarketingDate>
<EndMarketingDate>20250908</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Deseret Biologicals, Inc.</LabelerName>
<SubstanceName>ARSENIC TRIIODIDE; BLATTA ORIENTALIS; CINNAMIC ACID; COUMARIN; DERMATOPHAGOIDES FARINAE; GALLIC ACID; INDOLE; MALVIN; NAPHTHALENE; OXYGEN; QUEBRACHO BARK; QUERCETIN; RIBES NIGRUM LEAF; RUTIN; SYMPLOCARPUS FOETIDUS ROOT; VIBURNUM OPULUS BARK</SubstanceName>
<StrengthNumber>8; 6; 6; 8; 9; 6; 6; 12; 8; 12; 5; 6; 3; 6; 6; 3</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Non-Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190905</StartMarketingDatePackage>
<EndMarketingDatePackage>20250908</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For temporary relief of symptoms related to asthma including coughing and wheezing.**. **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50090-1529-0</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50090-1529-0) </PackageDescription>
<NDC11Code>50090-1529-00</NDC11Code>
<ProductNDC>50090-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140303</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203245</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate tablets are calcium channel blockers and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: 1 Hypertension (1.1)Amlodipine besylate tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions., 2 Coronary Artery Disease (1.2)Chronic Stable AnginaVasospastic Angina (Prinzmetal's or Variant Angina)Angiographically Documented Coronary Artery Disease in patients without heart failure or an ejection fraction < 40%.</IndicationAndUsage>
<Description>Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate Tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>50090-1529-1</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (50090-1529-1) </PackageDescription>
<NDC11Code>50090-1529-01</NDC11Code>
<ProductNDC>50090-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140303</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203245</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate tablets are calcium channel blockers and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: 1 Hypertension (1.1)Amlodipine besylate tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions., 2 Coronary Artery Disease (1.2)Chronic Stable AnginaVasospastic Angina (Prinzmetal's or Variant Angina)Angiographically Documented Coronary Artery Disease in patients without heart failure or an ejection fraction < 40%.</IndicationAndUsage>
<Description>Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate Tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>51662-1529-1</NDCCode>
<PackageDescription>1 SYRINGE in 1 BOX (51662-1529-1) / 2 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>51662-1529-01</NDC11Code>
<ProductNDC>51662-1529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naloxone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naloxone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213209</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naloxone hydrochloride injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids, including propoxyphene, methadone and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol and cyclazocine. Naloxone hydrochloride is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone hydrochloride injection may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).</IndicationAndUsage>
<Description>Naloxone hydrochloride, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. NALOXONE HYDROCHLORIDE. (-)-17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride. Naloxone hydrochloride dihydrate occurs as a white to almost white powder, and is freely soluble in water, soluble in ethanol (96%); practically insoluble in toluene. Naloxone hydrochloride injection, USP is available as a sterile solution for intravenous, intramuscular and subcutaneous administration in 1 mg/mL concentration. pH is adjusted to 3.5 ± 0.5 with hydrochloric acid. Each mL also contains 9 mg of sodium chloride. Naloxone hydrochloride injection, USP is preservative-free.</Description>
</NDC>
<NDC>
<NDCCode>67296-0007-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-0007-3)</PackageDescription>
<NDC11Code>67296-0007-03</NDC11Code>
<ProductNDC>67296-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19890503</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula. [cyclobenzaprine hydrochloride structural formula]. C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0037-3</NDCCode>
<PackageDescription>40 CAPSULE in 1 BOTTLE (67296-0037-3) </PackageDescription>
<NDC11Code>67296-0037-03</NDC11Code>
<ProductNDC>67296-0037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062702</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indications and Usage.</IndicationAndUsage>
<Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin, USP has the following structural formula. C 16H 17N 3O 4SH 2O M.W. 365.41. The nucleus of cephalexin, USP is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin, USP in water is approximately 4.5 to 5. The crystalline form of cephalexin, USP which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin, USP has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: CAPSULES: magnesium stearate, silicon dioxide, and sodium starch glycolate. Capsule Shell and Print Constituents: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze modified in SD-45, silicon dioxide or carboxymethylcellulose sodium, sodium lauryl sulfate, titanium dioxide and may contain propylene glycol. In addition, the 250 mg capsule shell contains yellow iron oxide. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate, USP equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: SUSPENSION: FD&C Red #40, cherry mixed fruit flavor (artificial flavors, benzyl alcohol, maltodextrin, and modified corn starch), silicon dioxide, sodium benzoate, sugar (fruit granulated), and xanthan gum. Each tablet contains cephalexin monohydrate, USP equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: TABLETS: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0044-3</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (67296-0044-3) </PackageDescription>
<NDC11Code>67296-0044-03</NDC11Code>
<ProductNDC>67296-0044</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potasium</ProprietaryName>
<NonProprietaryName>Penicillin V Potasium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064071</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Penicillin V potassium tablets are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal Infections (without bacteremia). Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal Infections. Mild to moderately severe infections of the respiratory tract. Staphylococcal infections – penicillin G-sensitive. Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent’s gingivitis and pharyngitis). Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract1. Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin-VK and other antibacterial drugs, penicillin-VK should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. [Penicillin V Potassium Chemical Structure]. Molecular Formula: C16H17O5KN2S Molecular Weight: 388.5. Penicillin -VK (Penicillin V Potassium Tablets USP), for oral administration, contain 250 mg (400,000 units) or 500 mg (800,000 units) penicillin V. In addition, each tablet contains the following inactive ingredients: hydroxypropyl methylcellulose, magnesium stearate, polyethylene glycol, povidone, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0053-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-0053-3)</PackageDescription>
<NDC11Code>67296-0053-03</NDC11Code>
<ProductNDC>67296-0053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077797</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>C20H21NHCl M.W. 311.9. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-0065-3</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (67296-0065-3) </PackageDescription>
<NDC11Code>67296-0065-03</NDC11Code>
<ProductNDC>67296-0065</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040419</ApplicationNumber>
<LabelerName>RedPharm Drug</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Have not been tolerated, or are not expected to be tolerated.</IndicationAndUsage>
<Description>Acetaminophen and codeine phosphate tablets are available in tablet form for oral administration. Acetaminophen, 4′-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. [Acetaminophen Chemical Structure]. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. [Codeine Phosphate Chemical Structure]. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/15 mg) contains. Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/30 mg) contains. Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/60 mg) contains. Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg. In addition, each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>67296-0078-3</NDCCode>
<PackageDescription>21 TABLET in 1 BOTTLE (67296-0078-3) </PackageDescription>
<NDC11Code>67296-0078-03</NDC11Code>
<ProductNDC>67296-0078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070033</ApplicationNumber>
<LabelerName>Redpharm Drug, inc.</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19900930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metronidazole tablets are indicated for the treatment of T. vaginalis infection in females and males when the presence of the trichomonad has been confirmed by appropriate laboratory procedures (wet smears and/or cultures).</IndicationAndUsage>
<Description>Metronidazole tablets USP, 250 mg or 500 mg is an oral formulation of the synthetic nitroimidazole antimicrobial, 1 H-Imidazole-1-ethanol, 2-methyl-5-nitro, which has the following structural formula:. C 6H 9N 3O 3 M.W. 171.15. Metronidazole tablets, USP contain 250 mg or 500 mg of metronidazole, USP. Inactive ingredients include silicified microcrystalline cellulose, crospovidone, colloidal silicon dioxide and hydrogenated vegetable oil.</Description>
</NDC>
<NDC>
<NDCCode>67296-0084-3</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (67296-0084-3) </PackageDescription>
<NDC11Code>67296-0084-03</NDC11Code>
<ProductNDC>67296-0084</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071321</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam Tablets USP are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, Diazepam Tablets USP may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam Tablets USP are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of Diazepam Tablets USP in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam Tablets USP are a benzodiazepine derivative. Chemically, diazepam, USP is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. [Diazepam Structural Formula]. C16H13ClN2O M.W. 284.75. Diazepam Tablets USP are available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 aluminum lake and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1 aluminum lake); magnesium stearate, microcrystalline cellulose, pregelatinized corn starch, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>67296-0106-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (67296-0106-3)</PackageDescription>
<NDC11Code>67296-0106-03</NDC11Code>
<ProductNDC>67296-0106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100712</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074421</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine HCl Tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>C20H21NHCl M.W. 311.9. Each tablet for oral administration contains 10 mg cyclobenzaprine hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, carnauba wax, corn starch, crospovidone, hypromellose, magnesium stearate, pregelatinized starch, polyethylene glycol, polysorbate 80, titanium dioxide, D and C Yellow No.10 aluminum lake, FD and C Blue No.2 aluminum lake, and FD and C Yellow No.6 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>67296-0114-1</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (67296-0114-1) / 3.5 g in 1 TUBE</PackageDescription>
<NDC11Code>67296-0114-01</NDC11Code>
<ProductNDC>67296-0114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gentak</ProprietaryName>
<NonProprietaryName>Gentamicin Sulfate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20060508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064093</ApplicationNumber>
<LabelerName>Redpharm Drug</LabelerName>
<SubstanceName>GENTAMICIN SULFATE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gentamicin sulfate ophthalmic ointment is indicated in the topical treatment of ocular bacterial infections including conjunctivitis, keratitis, keratoconjunctivitis, corneal ulcers, blepharitis, blepharonconjunctivitis: acute meibomianitis, and dacryocystitis, caused by susceptible strains of the following microorganisms: 1 Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Streptococcus pneumoniae, Enterobacter aerogenes, Escherichia coli, Haemophilus influenzae, Klebsiella pneumoniae, Neisseria gonorrhoeae, Pseudomonas aeruginosa, and Serratia marcescens.</IndicationAndUsage>
<Description>GENTAK ®Gentamicin sulfate is a water soluble antibiotic of the aminoglycoside group. Gentamicin sulfate ophthalmic ointment is a sterile ointment for ophthalmic use. Each gram contains gentamicin sulfate equivalent to 3 mg gentamicin in a base of white petrolatum and mineral oil, with methylparaben and propylparaben as preservatives. Gentamicin is obtained from cultures of Micromonospora purpurea.It is a mixture of the sulfate salts of gentamicin C 1C 2, and C 1A. All three components appear to have similar antimicrobial activities. Gentamicin sulfate occurs as a white to buff powder and is soluble in water and insoluble in alcohol. The structural formula is as follows:.</Description>
</NDC>
<NDC>
<NDCCode>67296-0123-3</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (67296-0123-3) </PackageDescription>
<NDC11Code>67296-0123-03</NDC11Code>
<ProductNDC>67296-0123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065096</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>875; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) and other antibacterial drugs, Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) are combination penicillin-class antibacterials and beta-lactamase inhibitors indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*. 1.1 Lower Respiratory Tract Infections. – caused by beta-lactamase–producing isolates of Haemophilus influenzae and Moraxella catarrhalis. 1.2 Acute Bacterial Otitis Media. – caused by beta-lactamase–producing isolates of H. influenzae and M. catarrhalis. 1.3 Sinusitis. – caused by beta-lactamase–producing isolates of H. influenzae and M. catarrhalis. 1.4 Skin and Skin Structure Infections. – caused by beta-lactamase–producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species. 1.5 Urinary Tract Infections. – caused by beta-lactamase–producing isolates of E. coli, Klebsiella species, and Enterobacter species. 1.6 Limitations of Use. – When susceptibility test results show susceptibility to amoxicillin, USP, indicating no beta-lactamase production, Amoxicillin and Clavulanate Potassium Tablets USP, Amoxicillin and Clavulanate Potassium for Oral Suspension USP, and Amoxicillin and Clavulanate Potassium Tablets USP (Chewable) should not be used.</IndicationAndUsage>
<Description>Amoxicillin and Clavulanate Potassium Tablets, Amoxicillin and Clavulanate Potassium for Oral Suspension, and Amoxicillin and Clavulanate Potassium Tablets (Chewable) are oral antibacterial combinations consisting of the semisynthetic antibiotic amoxicillin, USP and the beta-lactamase inhibitor, clavulanate potassium, USP (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. Chemically, amoxicillin, USP is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and has the following structural formula. [amoxicillin structural formula]. C16H19N3O5S3H2O M.W. 419.45. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. Chemically, clavulanate potassium, USP is potassium (Z)-(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and has the following structural formula. [clavulanic acid structural formula]. C8H8KNO5 M.W. 237.25. Amoxicillin and Clavulanate Potassium Tablets USP. Each tablet contains 500 mg or 875 mg amoxicillin, USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each Amoxicillin and Clavulanate Potassium Tablet USP contains 0.63 mEq potassium. Inactive Ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide, and triacetin. Amoxicillin and Clavulanate Potassium for Oral Suspension USP. After reconstitution each teaspoonful (5 mL) of suspension will contain 200 mg amoxicillin, USP as the trihydrate and 28.5 mg clavulanic acid as the potassium salt or 400 mg amoxicillin, USP as the trihydrate and 57 mg clavulanic acid as the potassium salt. Each 5 mL of reconstituted Amoxicillin and Clavulanate Potassium for Oral Suspension USP, 200 mg/28.5 mg per 5 mL contains 0.14 mEq potassium. Each 5 mL of reconstituted Amoxicillin and Clavulanate Potassium for Oral Suspension USP, 400 mg/57 mg per 5 mL contains 0.29 mEq of potassium. Inactive Ingredients: Powder for oral suspension: artificial raspberry powder, aspartame*, citric acid, colloidal silicon dioxide, mannitol, hypromellose, natural orange flavor, sodium citrate, sodium saccharin and xanthan gum. * See Warnings and Precautions (5.6). Amoxicillin and Clavulanate Potassium Tablets USP (Chewable). Each chewable tablet contains 200 mg amoxicillin, USP as the trihydrate and 28.5 mg clavulanic acid as the potassium salt or contains 400 mg amoxicillin, USP as the trihydrate and 57 mg clavulanic acid as the potassium salt. Each Amoxicillin and Clavulanate Potassium Tablet USP, (Chewable) 200 mg/28.5 mg contains 0.14 mEq potassium. Each Amoxicillin and Clavulanate Potassium Tablet USP, (Chewable) 400 mg/57 mg contains 0.29 mEq potassium. Inactive Ingredients: aspartame*, colloidal silicon dioxide, FD&C Red #40 lake, magnesium stearate, mannitol, microcrystalline cellulose, SA84 artificial ripe banana flavor, and artificial cherry flavor powder. * See Warnings and Precautions (5.6).</Description>
</NDC>
<NDC>
<NDCCode>67296-0138-3</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (67296-0138-3) </PackageDescription>
<NDC11Code>67296-0138-03</NDC11Code>
<ProductNDC>67296-0138</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085161</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19900101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets, USP are indicated in the following conditions. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance); congenital adrenal hyperplasia; hypercalcemia associated with cancer; nonsuppurative thyroiditis. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: psoriatic arthritis, rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy), ankylosing spondylitis, acute and subacute bursitis, acute nonspecific tenosynovitis, acute gouty arthritis, post-traumatic osteoarthritis, synovitis of osteoarthritis, epicondylitis. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, systemic dermatomyositis (polymyositis), acute rheumatic carditis. Dermatologic Diseases. Pemphigus; bullous dermatitis herpetiformis; severe erythema multiforme (Stevens-Johnson syndrome); exfoliative dermatitis; mycosis fungoides; severe psoriasis; severe seborrheic dermatitis. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis; bronchial asthma; contact dermatitis; atopic dermatitis; serum sickness; drug hypersensitivity reactions. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: allergic corneal marginal ulcers, herpes zoster ophthalmicus, anterior segment inflammation, diffuse posterior uveitis and choroiditis, sympathetic ophthalmia, allergic conjunctivitis, keratitis, chorioretinitis, optic neuritis, iritis and iridocyclitis. Respiratory Diseases. Symptomatic sarcoidosis; Loeffler’s syndrome not manageable by other means; berylliosis; fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy; aspiration pneumonitis. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults; secondary thrombocytopenia in adults; acquired (autoimmune) hemolytic anemia; erythroblastopenia (RBC anemia); congenital (erythroid) hypoplastic anemia. Neoplastic Diseases. For palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy; trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Prednisone tablets, USP contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate, 17,21-dihydroxy-. The structural formula is represented below. C 21H 26O 5 M.W. 358.44. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg of prednisone, USP (anhydrous). In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, crospovidone, docusate sodium, magnesium stearate and sodium benzoate. Prednisone tablets, USP 20 mg also contain FD&C Yellow No. 6.</Description>
</NDC>
<NDC>
<NDCCode>67296-0140-3</NDCCode>
<PackageDescription>42 TABLET in 1 BOTTLE (67296-0140-3) </PackageDescription>
<NDC11Code>67296-0140-03</NDC11Code>
<ProductNDC>67296-0140</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19871101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085162</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets are indicated in the following conditions. Endocrine disorders: primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance); congenital adrenal hyperplasia; hypercalcemia associated with cancer; nonsuppurative thyroiditis. Rheumatic disorders: as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: psoriatic arthritis, rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy), ankylosing spondylitis, acute and subacute bursitis, acute nonspecific tenosynovitis, acute gouty arthritis, post-traumatic osteoarthritis, synovitis of osteoarthritis, epicondylitis. Collagen diseases: during an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, systemic dermatomyositis (polymyositis), acute rheumatic carditis. Dermatologic diseases: pemphigus; bullous dermatitis herpetiformis; severe erythema multiforme (Stevens-Johnson syndrome); exfoliative dermatitis; mycosis fungoides; severe psoriasis; severe seborrheic dermatitis. Allergic states: control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis; bronchial asthma; contact dermatitis; atopic dermatitis; serum sickness; drug hypersensitivity reactions. Ophthalmic diseases: severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: allergic corneal marginal ulcers, herpes zoster ophthalmicus, anterior segment inflammation, diffuse posterior uveitis and choroiditis, sympathetic ophthalmia, allergic conjunctivitis, keratitis, chorioretinitis, optic neuritis, iritis and iridocyclitis. Respiratory diseases: symptomatic sarcoidosis; Loeffler’s syndrome not manageable by other means; berylliosis; fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy; aspiration pneumonitis. Hematologic disorders: idiopathic thrombocytopenic purpura in adults; secondary thrombocytopenia in adults; acquired (autoimmune) hemolytic anemia; erythroblastopenia (RBC anemia); congenital (erythroid) hypoplastic anemia. Neoplastic diseases: for palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous states: to induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal diseases: to tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. Nervous system: acute exacerbations of multiple sclerosis. Miscellaneous: tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy; trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Prednisone tablets contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate, 17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg of prednisone USP (anhydrous). In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, crospovidone, docusate sodium, magnesium stearate and sodium benzoate. Prednisone Tablets USP 20 mg also contain FD and C Yellow No. 6.</Description>
</NDC>
<NDC>
<NDCCode>67296-0144-3</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE (67296-0144-3) </PackageDescription>
<NDC11Code>67296-0144-03</NDC11Code>
<ProductNDC>67296-0144</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065061</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin hydrochloride capsules, USP are indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin hydrochloride capsules, USP are also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin hydrochloride capsules, USP are the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules, USP and other antibacterial drugs, clindamycin hydrochloride capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride, USP equivalent to 150 mg or 300 mg of clindamycin. Inactive ingredients: 150 mg - black iron oxide, corn starch, D&C Yellow #10, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide; 300 mg - black iron oxide, corn starch, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide. The structural formula is represented below. [structure]. C18H33ClN2O5SHCl M.W. 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6, 7, 8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>67296-0154-3</NDCCode>
<PackageDescription>5 TABLET, FILM COATED in 1 BOTTLE (67296-0154-3)</PackageDescription>
<NDC11Code>67296-0154-03</NDC11Code>
<ProductNDC>67296-0154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Avelox</ProprietaryName>
<NonProprietaryName>Moxifloxacin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110225</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021085</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>MOXIFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of AVELOX and other antibacterial drugs, AVELOX should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. AVELOX Tablets and IV are indicated for the treatment of adults (≥ 18 years of age) with infections caused by susceptible strains of the designated microorganisms in the conditions listed below [see Dosage and Administration (2) and Use In Specific Populations (8.5)]. Culture and Susceptibility Testing. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to moxifloxacin [see Clinical Pharmacology (12.4)]. Therapy with AVELOX may be initiated before results of these tests are known; once results become available, appropriate therapy should be continued.</IndicationAndUsage>
<Description>AVELOX (moxifloxacin hydrochloride) is a synthetic broad spectrum antibacterial agent for oral and intravenous administration. Moxifloxacin, a fluoroquinolone, is available as the monohydrochloride salt of 1-cyclopropyl-7-[(S,S)-2,8-diazabicyclo[4.3.0]non-8-yl]-6-fluoro-8-methoxy-1,4-dihydro-4-oxo-3 quinoline carboxylic acid. It is a slightly yellow to yellow crystalline substance with a molecular weight of 437.9. Its empirical formula is C21H24FN3O4*HCl and its chemical structure is as follows.</Description>
</NDC>
<NDC>
<NDCCode>67296-0183-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (67296-0183-3) </PackageDescription>
<NDC11Code>67296-0183-03</NDC11Code>
<ProductNDC>67296-0183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075704</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67296-0222-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (67296-0222-3) </PackageDescription>
<NDC11Code>67296-0222-03</NDC11Code>
<ProductNDC>67296-0222</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Pamoate</ProprietaryName>
<NonProprietaryName>Hydroxyzine Pamoate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19811214</StartMarketingDate>
<EndMarketingDate>20260531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086183</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>HYDROXYZINE PAMOATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200101</StartMarketingDatePackage>
<EndMarketingDatePackage>20260531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses, and in histamine-mediated pruritus. As a sedative when used as premedication and following general anesthesia, hydroxyzine may potentiate meperidine (Demerol ®) and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine pamoate is a light yellow, practically odorless powder practically insoluble in water and methanol and freely soluble in dimethylformamide. It is chemically designated as (±)-2-[2-[4-( p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol 4,4’-methylenebis[3-hydroxy-2-naphthoate] (1:1) [10246-75-0] and can be structurally represented as follows:. C 21H 27CIN 2O 2C 23H 16O 6. M.W. 763.27. Each capsule, for oral administration, contains hydroxyzine pamoate equivalent to hydroxyzine hydrochloride 25 mg or 50 mg. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, sodium starch glycolate (potato), and sodium lauryl sulfate. The capsule shell contains the following ingredients: D&C Yellow #10, FD&C Green #3, FD&C Yellow #6, gelatin, and titanium dioxide. The edible imprinting ink contains the following ingredients: black iron oxide, D&C Yellow #10, FD&C Blue #1, FD&C Blue #2, FD&C Red #40, propylene glycol, and shellac glaze.</Description>
</NDC>
</NDCList>