{
"NDC": [
{
"NDCCode": "67457-507-52",
"PackageDescription": "1 VIAL in 1 CARTON (67457-507-52) > 50 mL in 1 VIAL",
"NDC11Code": "67457-0507-52",
"ProductNDC": "67457-507",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INFILTRATION; INTRAVENOUS",
"StartMarketingDate": "20100912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091056",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2017-11-10"
},
{
"NDCCode": "51655-507-52",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (51655-507-52) ",
"NDC11Code": "51655-0507-52",
"ProductNDC": "51655-507",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nortriptyline Hydrochloride",
"NonProprietaryName": "Nortriptyline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075520",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "NORTRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210113",
"SamplePackage": "N",
"IndicationAndUsage": "Nortriptyline hydrochloride is indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.",
"Description": "Nortriptyline Hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5 H-dibenzo[ a,d]cyclohepten-5-ylidene)- N-methyl, hydrochloride. The structural formula is as follows:. Each capsule, for oral administration, contains nortriptyline hydrochloride equivalent to 10 mg, 25 mg, 50 mg, and 75 mg of nortriptyline hydrochloride USP. In addition, each capsule contains the following inactive ingredients: black iron oxide, colloidal silicon dioxide, D&C Yellow #10 (aluminum lake), D&C Yellow #10, FD&C Blue #1 (aluminum lake), FD&C Blue #2 (aluminum lake), FD&C Green #3 (10, 50 and 75 mg only), FD&C Red #40 (aluminum lake), gelatin, I.M.S. 74 OP, magnesium stearate, pregelatinized corn starch, shellac, sodium lauryl sulfate and titanium dioxide."
},
{
"NDCCode": "67544-507-52",
"PackageDescription": "18 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (67544-507-52)",
"NDC11Code": "67544-0507-52",
"ProductNDC": "67544-507",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levitra",
"NonProprietaryName": "Vardenafil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080515",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021400",
"LabelerName": "APHENA PHARMA SOLUTIONS - TENNESSEE, INC.",
"SubstanceName": "VARDENAFIL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC],Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "LEVITRA is indicated for the treatment of erectile dysfunction.",
"Description": "LEVITRA® is an oral therapy for the treatment of erectile dysfunction. This monohydrochloride salt of vardenafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Vardenafil HCl is designated chemically as piperazine, 1-[[3-(1,4-dihydro-5-methyl-4-oxo-7-propylimidazo[5,1-f ][1,2,4]triazin-2-yl)-4-ethoxyphenyl]sulfonyl]-4-ethyl-, monohydrochloride and has the following structural formula. Vardenafil HCl is a nearly colorless, solid substance with a molecular weight of 579.1 g/mol and a solubility of 0.11 mg/mL in water. LEVITRA is formulated as orange, round, film-coated tablets with “BAYER” cross debossed on one side and “2.5”, “5”, “10”, and “20” on the other side corresponding to 2.5 mg, 5 mg, 10 mg, and 20 mg of vardenafil, respectively. In addition to the active ingredient, vardenafil HCl, each tablet contains microcrystalline cellulose, crospovidone, colloidal silicon dioxide, magnesium stearate, hypromellose, polyethylene glycol, titanium dioxide, yellow ferric oxide, and red ferric oxide."
},
{
"NDCCode": "67457-455-52",
"PackageDescription": "10 VIAL in 1 CARTON (67457-455-52) > 5 mL in 1 VIAL (67457-455-00) ",
"NDC11Code": "67457-0455-52",
"ProductNDC": "67457-455",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cytarabine",
"NonProprietaryName": "Cytarabine",
"DosageFormName": "INJECTION",
"RouteName": "INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20111214",
"EndMarketingDate": "20221031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200915",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "CYTARABINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20111214",
"EndMarketingDatePackage": "20221031",
"SamplePackage": "N"
},
{
"NDCCode": "67457-471-52",
"PackageDescription": "1 VIAL in 1 CARTON (67457-471-52) > 5 mL in 1 VIAL",
"NDC11Code": "67457-0471-52",
"ProductNDC": "67457-471",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paclitaxel",
"NonProprietaryName": "Paclitaxel",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20140807",
"EndMarketingDate": "20210228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091540",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "PACLITAXEL",
"StrengthNumber": "30",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Microtubule Inhibition [PE],Microtubule Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-03-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20140807",
"EndMarketingDatePackage": "20210228",
"SamplePackage": "N"
},
{
"NDCCode": "67457-510-52",
"PackageDescription": "1 VIAL in 1 CARTON (67457-510-52) > 50 mL in 1 VIAL",
"NDC11Code": "67457-0510-52",
"ProductNDC": "67457-510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INFILTRATION; INTRAVENOUS",
"StartMarketingDate": "20101001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091058",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2017-11-10"
},
{
"NDCCode": "67457-618-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (67457-618-10) / 52.6 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "67457-0618-10",
"ProductNDC": "67457-618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine",
"NonProprietaryName": "Gemcitabine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205242",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/52.6mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171218",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1), 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2), 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3), 4 as a single agent for the treatment of pancreatic cancer. (1.4).",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2´-deoxy-2´,2´-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows. Gemcitabine HCl, USP is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 g, or 2 g of gemcitabine equivalent to 227.7 mg, 1.139 g, or 2.277 g of gemcitabine HCl, USP. Each mL contains 38 mg of gemcitabine free base in Water for Injection equivalent to 43.27 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "67457-195-01",
"PackageDescription": "1 KIT in 1 CARTON (67457-195-01) * 10 mL in 1 VIAL, GLASS (67457-193-50) * 10 mL in 1 VIAL, GLASS (67457-194-10) ",
"NDC11Code": "67457-0195-01",
"ProductNDC": "67457-195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Melphalan Hydrochloride",
"NonProprietaryName": "Melphalan Hydrochloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20130110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090270",
"LabelerName": "Mylan Institutional LLC",
"Status": "Active",
"LastUpdate": "2020-11-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130110",
"SamplePackage": "N",
"IndicationAndUsage": "Melphalan Hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.",
"Description": "Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or Lsarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ~2.5. Melphalan Hydrochloride for Injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and the inactive ingredient povidone 20 mg. Melphalan Hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6.0 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL. Melphalan Hydrochloride for Injection is administered intravenously."
},
{
"NDCCode": "67457-215-01",
"PackageDescription": "1 KIT in 1 CARTON (67457-215-01) * 10 mL in 1 VIAL, GLASS (67457-213-50) * 10 mL in 1 VIAL, GLASS (67457-214-10) ",
"NDC11Code": "67457-0215-01",
"ProductNDC": "67457-215",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Melphalan Hydrochloride",
"NonProprietaryName": "Melphalan Hydrochloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20130110",
"EndMarketingDate": "20260131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090270",
"LabelerName": "Mylan Institutional LLC",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130110",
"EndMarketingDatePackage": "20260131",
"SamplePackage": "N",
"IndicationAndUsage": "Melphalan Hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.",
"Description": "Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or Lsarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the Lisomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ~ 2.5. Melphalan Hydrochloride for Injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and the inactive ingredient povidone 20 mg. Melphalan Hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6.0 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL. Melphalan Hydrochloride for Injection is administered intravenously."
},
{
"NDCCode": "67457-381-58",
"PackageDescription": "5 VIAL in 1 CARTON (67457-381-58) > 5 mL in 1 VIAL (67457-381-00) ",
"NDC11Code": "67457-0381-58",
"ProductNDC": "67457-381",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol Decanoate",
"NonProprietaryName": "Haloperidol Decanoate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20140301",
"EndMarketingDate": "20230131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075440",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "HALOPERIDOL DECANOATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20140301",
"EndMarketingDatePackage": "20230131",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol decanoate injection, 50 mg/mL and haloperidol decanoate injection, 100 mg/mL are indicated for the treatment of patients with schizophrenia who require prolonged parenteral antipsychotic therapy.",
"Description": "Haloperidol decanoate is the decanoate ester of the butyrophenone, haloperidol decanoate injection. It has a markedly extended duration of effect. It is available in sesame oil in sterile form for intramuscular (IM) injection. The structural formula of haloperidol decanoate, 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl]-4 piperidinyl decanoate, is:. Haloperidol decanoate, USP is a white or almost white powder. It very soluble in alcohol, in methanol and in methylene chloride, practically insoluble in water. Haloperidol decanoate injection is clear, slightly viscous, colorless to pink or amber solution. Each mL of haloperidol decanoate injection for intramuscular injection contains 50 mg haloperidol (present as haloperidol decanoate, USP 70.52 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative. Each mL of haloperidol decanoate injection for intramuscular injection contains 100 mg haloperidol (present as haloperidol decanoate, USP 141.04 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative."
},
{
"NDCCode": "67457-409-13",
"PackageDescription": "5 VIAL in 1 CARTON (67457-409-13) / 1 mL in 1 VIAL (67457-409-00) ",
"NDC11Code": "67457-0409-13",
"ProductNDC": "67457-409",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol Decanoate",
"NonProprietaryName": "Haloperidol Decanoate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20140301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075440",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "HALOPERIDOL DECANOATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140301",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol decanoate injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.",
"Description": "Haloperidol decanoate injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-Chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl]piperidin-4-yl decanoate. Haloperidol decanoate, USP is a white or almost white powder. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.11. Haloperidol decanoate is very soluble in alcohol, in methanol and in methylene chloride, practically insoluble in water. Each mL of haloperidol decanoate injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate, USP) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate, USP) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative."
},
{
"NDCCode": "67457-410-13",
"PackageDescription": "10 VIAL in 1 CARTON (67457-410-13) / 1 mL in 1 VIAL (67457-410-00) ",
"NDC11Code": "67457-0410-13",
"ProductNDC": "67457-410",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol Decanoate",
"NonProprietaryName": "Haloperidol Decanoate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20130423",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075440",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "HALOPERIDOL DECANOATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130423",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol decanoate injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.",
"Description": "Haloperidol decanoate injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-Chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl]piperidin-4-yl decanoate. Haloperidol decanoate, USP is a white or almost white powder. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.11. Haloperidol decanoate is very soluble in alcohol, in methanol and in methylene chloride, practically insoluble in water. Each mL of haloperidol decanoate injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate, USP) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate, USP) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative."
},
{
"NDCCode": "67457-428-30",
"PackageDescription": "10 VIAL in 1 CARTON (67457-428-30) / 30 mL in 1 VIAL (67457-428-00) ",
"NDC11Code": "67457-0428-30",
"ProductNDC": "67457-428",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20140219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065407",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "TOBRAMYCIN SULFATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140219",
"SamplePackage": "N",
"IndicationAndUsage": "Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiella sp. Lower respiratory tract infections caused by P. aeruginosa, Klebsiella sp, Enterobacter sp, Serratia sp, E. coli, and S. aureus (penicillinase and non-penicillinase-producing strains). Serious central-nervous-system infections (meningitis) caused by susceptible organisms. Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella sp, and Enterobacter sp. Skin, bone, and skin-structure infections caused by P. aeruginosa, Proteus sp, E. coli, Klebsiella sp, Enterobacter sp, and S. aureus. Complicated and recurrent urinary tract infections caused by P. aeruginosa, Proteus sp (indole-positive and indole-negative), E. coli, Klebsiella sp, Enterobacter sp, Serratia sp, S. aureus, Providencia sp, and Citrobacter sp. Aminoglycosides, including tobramycin sulfate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram-negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulfate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGS box above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Tobramycin injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; phenol added as a preservative, 5 mg; sodium bisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment. pH (3.0 to 6.5). Tobramycin 80 mg/2 mL vial contains 1.568 mg (0.0682 mEq) of sodium. Tobramycin 1.2 g/30 mL vial contains 23.52 mg (1.0226 mEq) of sodium. Tobramycin sulfate is, O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the chemical formula (C18H37N5O9)2 5H2SO4. The molecular weight is 1,425.45. The structural formula for tobramycin is as follows."
},
{
"NDCCode": "67457-473-22",
"PackageDescription": "25 VIAL in 1 CARTON (67457-473-22) / 2 mL in 1 VIAL (67457-473-00) ",
"NDC11Code": "67457-0473-22",
"ProductNDC": "67457-473",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20140819",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065407",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "TOBRAMYCIN SULFATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140819",
"SamplePackage": "N",
"IndicationAndUsage": "Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiella sp. Lower respiratory tract infections caused by P. aeruginosa, Klebsiella sp, Enterobacter sp, Serratia sp, E. coli, and S. aureus (penicillinase and non-penicillinase-producing strains). Serious central-nervous-system infections (meningitis) caused by susceptible organisms. Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella sp, and Enterobacter sp. Skin, bone, and skin-structure infections caused by P. aeruginosa, Proteus sp, E. coli, Klebsiella sp, Enterobacter sp, and S. aureus. Complicated and recurrent urinary tract infections caused by P. aeruginosa, Proteus sp (indole-positive and indole-negative), E. coli, Klebsiella sp, Enterobacter sp, Serratia sp, S. aureus, Providencia sp, and Citrobacter sp. Aminoglycosides, including tobramycin sulfate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram-negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulfate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGS box above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Tobramycin injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; phenol added as a preservative, 5 mg; sodium bisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment. pH (3.0 to 6.5). Tobramycin 80 mg/2 mL vial contains 1.568 mg (0.0682 mEq) of sodium. Tobramycin 1.2 g/30 mL vial contains 23.52 mg (1.0226 mEq) of sodium. Tobramycin sulfate is, O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the chemical formula (C18H37N5O9)2 5H2SO4. The molecular weight is 1,425.45. The structural formula for tobramycin is as follows."
},
{
"NDCCode": "10544-507-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (10544-507-30)",
"NDC11Code": "10544-0507-30",
"ProductNDC": "10544-507",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077987",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate.",
"Description": "Pravastatin sodium tablets USP are one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium USP is designated chemically as 1-Naphthalene-heptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. C 23H 35NaO 7 MW 446.52. Pravastatin sodium USP is an odorless, white to yellowish white, hygroscpic powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7. It is freely soluble in water and methanol, soluble in alcohol, very slightly soluble in acetonitrile and practically insoluble in ether, ethyl acetate and chloroform. Pravastatin sodium tablets USP are available for oral administration as 10 mg, 20 mg, 40 mg, and 80 mg tablets. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium stearate, mannitol, meglumine, microcrystalline cellulose and corn starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake."
},
{
"NDCCode": "63323-507-20",
"PackageDescription": "10 VIAL in 1 CARTON (63323-507-20) > 10 mL in 1 VIAL (63323-507-01) ",
"NDC11Code": "63323-0507-20",
"ProductNDC": "63323-507",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meropenem",
"NonProprietaryName": "Meropenem",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20111014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091404",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "MEROPENEM",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Active",
"LastUpdate": "2021-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20111014",
"SamplePackage": "N",
"IndicationAndUsage": "Meropenem for injection (I.V.) is a penem antibacterial indicated for the treatment of: : 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) , 2 Complicated intra-abdominal infections (adult and pediatric patients). (1.2) , 3 Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) .",
"Description": "Meropenem for injection, USP (I.V.) is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3-[[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is:. Meropenem for injection, USP (I.V.) is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 500 mg Meropenem for injection, USP (I.V.) vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq). Each 1 gram Meropenem for injection, USP (I.V.) vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq) [see Dosage and Administration (2.4)]."
},
{
"NDCCode": "63323-507-21",
"PackageDescription": "10 VIAL in 1 CARTON (63323-507-21) > 10 mL in 1 VIAL (63323-507-19) ",
"NDC11Code": "63323-0507-21",
"ProductNDC": "63323-507",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meropenem",
"NonProprietaryName": "Meropenem",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20111014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091404",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "MEROPENEM",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Active",
"LastUpdate": "2021-03-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20111014",
"SamplePackage": "N",
"IndicationAndUsage": "Meropenem for injection (I.V.) is a penem antibacterial indicated for the treatment of: : 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) , 2 Complicated intra-abdominal infections (adult and pediatric patients). (1.2) , 3 Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) .",
"Description": "Meropenem for injection, USP (I.V.) is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3-[[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is:. Meropenem for injection, USP (I.V.) is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 500 mg Meropenem for injection, USP (I.V.) vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq). Each 1 gram Meropenem for injection, USP (I.V.) vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq) [see Dosage and Administration (2.4)]."
},
{
"NDCCode": "63323-507-25",
"PackageDescription": "25 VIAL in 1 CARTON (63323-507-25) > 10 mL in 1 VIAL (63323-507-43) ",
"NDC11Code": "63323-0507-25",
"ProductNDC": "63323-507",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meropenem",
"NonProprietaryName": "Meropenem",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20111014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091404",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "MEROPENEM",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Active",
"LastUpdate": "2021-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20111014",
"SamplePackage": "N",
"IndicationAndUsage": "Meropenem for injection (I.V.) is a penem antibacterial indicated for the treatment of: : 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). ( 1.1) , 2 Complicated intra-abdominal infections (adult and pediatric patients). ( 1.2) , 3 Bacterial meningitis (pediatric patients 3 months of age and older only). ( 1.3) .",
"Description": "Meropenem for injection, USP (I.V.) is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3-[[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C 17H 25N 3O 5S3H 2O with a molecular weight of 437.52. Its structural formula is:. Meropenem for injection, USP (I.V.) is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 500 mg Meropenem for injection, USP (I.V.) vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq). Each 1 gram Meropenem for injection, USP (I.V.) vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq) [ see Dosage and Administration ( 2.4) ]."
},
{
"NDCCode": "67457-001-10",
"PackageDescription": "10 VIAL in 1 CARTON (67457-001-10) > 10 mL in 1 VIAL (67457-001-00) ",
"NDC11Code": "67457-0001-10",
"ProductNDC": "67457-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketamine Hydrochloride",
"NonProprietaryName": "Ketamine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20130604",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076092",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "KETAMINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20130604",
"SamplePackage": "N"
},
{
"NDCCode": "67457-108-10",
"PackageDescription": "10 VIAL in 1 CARTON (67457-108-10) / 10 mL in 1 VIAL (67457-108-00) ",
"NDC11Code": "67457-0108-10",
"ProductNDC": "67457-108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketamine Hydrochloride",
"NonProprietaryName": "Ketamine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20130604",
"EndMarketingDate": "20230831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076092",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "KETAMINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2023-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130604",
"EndMarketingDatePackage": "20230831",
"SamplePackage": "N"
},
{
"NDCCode": "67457-118-50",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (67457-118-50) > 50 mL in 1 VIAL, GLASS",
"NDC11Code": "67457-0118-50",
"ProductNDC": "67457-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ascorbic Acid",
"NonProprietaryName": "Ascorbic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19990601",
"EndMarketingDate": "20220331",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "ASCORBIC ACID",
"StrengthNumber": "500",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Ascorbic Acid [CS], Vitamin C [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-04-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19990601",
"EndMarketingDatePackage": "20220331",
"SamplePackage": "N"
},
{
"NDCCode": "67457-124-10",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (67457-124-10) / 10 mL in 1 VIAL, GLASS",
"NDC11Code": "67457-0124-10",
"ProductNDC": "67457-124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diphenhydramine Hydrochloride",
"NonProprietaryName": "Diphenhydramine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20130509",
"EndMarketingDate": "20260228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040498",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130509",
"EndMarketingDatePackage": "20260228",
"SamplePackage": "N",
"IndicationAndUsage": "Diphenhydramine hydrochloride injection, is effective in adults and pediatric patients, other than premature infants and neonates, for the following conditions when diphenhydramine hydrochloride in the oral form is impractical.",
"Description": "Diphenhydramine hydrochloride is an antihistamine drug having the chemical name 2-(Diphenylmethoxy)-N, N-dimethylethylamine hydrochloride. It occurs as a white, crystalline powder, is freely soluble in water and alcohol and has a molecular weight of 291.82. The molecular formula is C17H21NO HCl. The structural formula is as follows. Diphenhydramine hydrochloride in the parenteral form is a sterile, pyrogen-free solution available in a concentration of 50 mg of diphenhydramine hydrochloride per mL. The solutions for parenteral use have been adjusted to a pH between 5.0 and 6.0 with either sodium hydroxide or hydrochloric acid and contains 0.1 mg/mL benzethonium chloride as a germicidal agent."
},
{
"NDCCode": "67457-134-50",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (67457-134-50) > 50 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "67457-0134-50",
"ProductNDC": "67457-134",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Chloride",
"NonProprietaryName": "Magnesium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130314",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "MAGNESIUM CHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2021-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130314",
"SamplePackage": "N",
"IndicationAndUsage": "As an electrolyte replenisher in magnesium deficiencies.",
"Description": "Magnesium Chloride Injection is a sterile solution of Magnesium Chloride Hexahydrate in Water for Injection q.s. Each mL contains Magnesium Chloride Hexahydrate 200 mg, Sodium Chloride 9 mg, Benzyl Alcohol 1% as a preservative, Water for Injection, q.s. pH adjusted with Hydrochloric Acid and/or Sodium Hydroxide. Total osmolarity equivalent to 2.951 mOsm/mL. Contains 1.97 mEq of Mg++ and Cl- per mL. The structural formula is MgCl26H2O."
},
{
"NDCCode": "67457-146-30",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (67457-146-30) > 30 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "67457-0146-30",
"ProductNDC": "67457-146",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vitamin B Complex",
"NonProprietaryName": "Thiamine Hydrochloride, Riboflavin 5 Phosphate Sodium, Dexpanthenol And Niacinamide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130510",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "THIAMINE HYDROCHLORIDE; RIBOFLAVIN 5'-PHOSPHATE SODIUM; DEXPANTHENOL; NIACINAMIDE; PYRIDOXINE HYDROCHLORIDE",
"StrengthNumber": "100; 2; 2; 100; 2",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL; mg/mL",
"Pharm_Classes": "Analogs/Derivatives [Chemical/Ingredient], Vitamin B 6 [Chemical/Ingredient], Vitamin B6 Analog [EPC]",
"Status": "Active",
"LastUpdate": "2021-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130510",
"SamplePackage": "N",
"IndicationAndUsage": "In disorders requiring parenteral administration of vitamins, i.e. pre- and post-operative treatment, when requirements are increased as in fever, severe burns, increased metabolism, pregnancy, gastrointestinal disorders interfering with intake or absorption of vitamins, prolonged or wasting diseases, alcoholism and where other deficiencies exist.",
"Description": "Vitamin B-Complex 100 Injection is a sterile solution for intramuscular or slow intravenous injection comprised of vitamins which may be categorized as belonging to the vitamin B complex group. Each mL contains: Thiamine Hydrochloride 100 mg, Riboflavin 5’ Phosphate Sodium 2 mg, Pyridoxine Hydrochloride 2 mg, Dexpanthenol 2 mg, Niacinamide 100 mg, with Benzyl Alcohol 2% as preservative, in Water for Injection. Sodium Hydroxide and/or Hydrochloric Acid may have been used to adjust pH."
},
{
"NDCCode": "67457-148-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (67457-148-10) > 10 mL in 1 VIAL, MULTI-DOSE (67457-148-00)",
"NDC11Code": "67457-0148-10",
"ProductNDC": "67457-148",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesna",
"NonProprietaryName": "Mesna",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120403",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076488",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "MESNA",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cytoprotective Agent [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-30",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "67457-153-03",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (67457-153-03) > 3 mL in 1 VIAL, GLASS (67457-153-00) ",
"NDC11Code": "67457-0153-03",
"ProductNDC": "67457-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20021014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076217",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2020-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20021015",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone hydrochloride injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
"Description": "Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride, USP (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)]."
},
{
"NDCCode": "67457-153-09",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (67457-153-09) > 9 mL in 1 VIAL, GLASS (67457-153-99) ",
"NDC11Code": "67457-0153-09",
"ProductNDC": "67457-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20021014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076217",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2020-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20040105",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone hydrochloride injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
"Description": "Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride, USP (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)]."
},
{
"NDCCode": "67457-153-18",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (67457-153-18) > 18 mL in 1 VIAL, GLASS",
"NDC11Code": "67457-0153-18",
"ProductNDC": "67457-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20021014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076217",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2020-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20031114",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone hydrochloride injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
"Description": "Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride, USP (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)]."
},
{
"NDCCode": "67457-162-02",
"PackageDescription": "5 VIAL, MULTI-DOSE in 1 CARTON (67457-162-02) > 2 mL in 1 VIAL, MULTI-DOSE (67457-162-00) ",
"NDC11Code": "67457-0162-02",
"ProductNDC": "67457-162",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sotradecol",
"NonProprietaryName": "Tetradecyl Hydrogen Sulfate (ester)",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040541",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "TETRADECYL HYDROGEN SULFATE (ESTER)",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2021-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130429",
"SamplePackage": "N",
"IndicationAndUsage": "Sotradecol (sodium tetradecyl sulfate injection) is indicated in the treatment of small uncomplicated varicose veins of the lower extremities that show simple dilation with competent valves. The benefit-to-risk ratio should be considered in selected patients who are great surgical risks.",
"Description": "Sodium tetradecyl sulfate is an anionic surfactant which occurs as a white, waxy solid. The structural formula is as follows:. C14H29NaSO4 7-Ethyl-2-methyl-4-hendecanol sulfate sodium salt MW 316.44. Sotradecol (sodium tetradecyl sulfate injection) is a sterile nonpyrogenic solution for intravenous use as a sclerosing agent. 1% 20 mg/2 mL (10 mg/mL): Each mL contains sodium tetradecyl sulfate 10 mg, benzyl alcohol 0.02 mL and dibasic sodium phosphate, anhydrous 4.0 mg in Water for Injection. pH 7.9; monobasic sodium phosphate and/or sodium hydroxide added, if needed, for pH adjustment. 3% 60 mg/2 mL (30 mg/mL): Each mL contains sodium tetradecyl sulfate 30 mg, benzyl alcohol 0.02 mL and dibasic sodium phosphate, anhydrous 9.0 mg in Water for Injection. pH 7.9; monobasic sodium phosphate and/or sodium hydroxide added, if needed, for pH adjustment."
},
{
"NDCCode": "67457-163-02",
"PackageDescription": "5 VIAL, MULTI-DOSE in 1 CARTON (67457-163-02) > 2 mL in 1 VIAL, MULTI-DOSE (67457-163-00) ",
"NDC11Code": "67457-0163-02",
"ProductNDC": "67457-163",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sotradecol",
"NonProprietaryName": "Tetradecyl Hydrogen Sulfate (ester)",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040541",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "TETRADECYL HYDROGEN SULFATE (ESTER)",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2021-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130429",
"SamplePackage": "N",
"IndicationAndUsage": "Sotradecol (sodium tetradecyl sulfate injection) is indicated in the treatment of small uncomplicated varicose veins of the lower extremities that show simple dilation with competent valves. The benefit-to-risk ratio should be considered in selected patients who are great surgical risks.",
"Description": "Sodium tetradecyl sulfate is an anionic surfactant which occurs as a white, waxy solid. The structural formula is as follows:. C14H29NaSO4 7-Ethyl-2-methyl-4-hendecanol sulfate sodium salt MW 316.44. Sotradecol (sodium tetradecyl sulfate injection) is a sterile nonpyrogenic solution for intravenous use as a sclerosing agent. 1% 20 mg/2 mL (10 mg/mL): Each mL contains sodium tetradecyl sulfate 10 mg, benzyl alcohol 0.02 mL and dibasic sodium phosphate, anhydrous 4.0 mg in Water for Injection. pH 7.9; monobasic sodium phosphate and/or sodium hydroxide added, if needed, for pH adjustment. 3% 60 mg/2 mL (30 mg/mL): Each mL contains sodium tetradecyl sulfate 30 mg, benzyl alcohol 0.02 mL and dibasic sodium phosphate, anhydrous 9.0 mg in Water for Injection. pH 7.9; monobasic sodium phosphate and/or sodium hydroxide added, if needed, for pH adjustment."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67457-507-52</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (67457-507-52) > 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>67457-0507-52</NDC11Code>
<ProductNDC>67457-507</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INFILTRATION; INTRAVENOUS</RouteName>
<StartMarketingDate>20100912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091056</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-11-10</LastUpdate>
</NDC>
<NDC>
<NDCCode>51655-507-52</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (51655-507-52) </PackageDescription>
<NDC11Code>51655-0507-52</NDC11Code>
<ProductNDC>51655-507</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nortriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Nortriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075520</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>NORTRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nortriptyline hydrochloride is indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Nortriptyline Hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5 H-dibenzo[ a,d]cyclohepten-5-ylidene)- N-methyl, hydrochloride. The structural formula is as follows:. Each capsule, for oral administration, contains nortriptyline hydrochloride equivalent to 10 mg, 25 mg, 50 mg, and 75 mg of nortriptyline hydrochloride USP. In addition, each capsule contains the following inactive ingredients: black iron oxide, colloidal silicon dioxide, D&C Yellow #10 (aluminum lake), D&C Yellow #10, FD&C Blue #1 (aluminum lake), FD&C Blue #2 (aluminum lake), FD&C Green #3 (10, 50 and 75 mg only), FD&C Red #40 (aluminum lake), gelatin, I.M.S. 74 OP, magnesium stearate, pregelatinized corn starch, shellac, sodium lauryl sulfate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67544-507-52</NDCCode>
<PackageDescription>18 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (67544-507-52)</PackageDescription>
<NDC11Code>67544-0507-52</NDC11Code>
<ProductNDC>67544-507</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levitra</ProprietaryName>
<NonProprietaryName>Vardenafil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080515</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021400</ApplicationNumber>
<LabelerName>APHENA PHARMA SOLUTIONS - TENNESSEE, INC.</LabelerName>
<SubstanceName>VARDENAFIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC],Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>LEVITRA is indicated for the treatment of erectile dysfunction.</IndicationAndUsage>
<Description>LEVITRA® is an oral therapy for the treatment of erectile dysfunction. This monohydrochloride salt of vardenafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Vardenafil HCl is designated chemically as piperazine, 1-[[3-(1,4-dihydro-5-methyl-4-oxo-7-propylimidazo[5,1-f ][1,2,4]triazin-2-yl)-4-ethoxyphenyl]sulfonyl]-4-ethyl-, monohydrochloride and has the following structural formula. Vardenafil HCl is a nearly colorless, solid substance with a molecular weight of 579.1 g/mol and a solubility of 0.11 mg/mL in water. LEVITRA is formulated as orange, round, film-coated tablets with “BAYER” cross debossed on one side and “2.5”, “5”, “10”, and “20” on the other side corresponding to 2.5 mg, 5 mg, 10 mg, and 20 mg of vardenafil, respectively. In addition to the active ingredient, vardenafil HCl, each tablet contains microcrystalline cellulose, crospovidone, colloidal silicon dioxide, magnesium stearate, hypromellose, polyethylene glycol, titanium dioxide, yellow ferric oxide, and red ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>67457-455-52</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (67457-455-52) > 5 mL in 1 VIAL (67457-455-00) </PackageDescription>
<NDC11Code>67457-0455-52</NDC11Code>
<ProductNDC>67457-455</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cytarabine</ProprietaryName>
<NonProprietaryName>Cytarabine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20111214</StartMarketingDate>
<EndMarketingDate>20221031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200915</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>CYTARABINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20111214</StartMarketingDatePackage>
<EndMarketingDatePackage>20221031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67457-471-52</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (67457-471-52) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>67457-0471-52</NDC11Code>
<ProductNDC>67457-471</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paclitaxel</ProprietaryName>
<NonProprietaryName>Paclitaxel</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20140807</StartMarketingDate>
<EndMarketingDate>20210228</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091540</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>PACLITAXEL</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE],Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-03-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20140807</StartMarketingDatePackage>
<EndMarketingDatePackage>20210228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67457-510-52</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (67457-510-52) > 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>67457-0510-52</NDC11Code>
<ProductNDC>67457-510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INFILTRATION; INTRAVENOUS</RouteName>
<StartMarketingDate>20101001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091058</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-11-10</LastUpdate>
</NDC>
<NDC>
<NDCCode>67457-618-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (67457-618-10) / 52.6 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>67457-0618-10</NDC11Code>
<ProductNDC>67457-618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine</ProprietaryName>
<NonProprietaryName>Gemcitabine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205242</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/52.6mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1), 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2), 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3), 4 as a single agent for the treatment of pancreatic cancer. (1.4).</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2´-deoxy-2´,2´-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows. Gemcitabine HCl, USP is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 g, or 2 g of gemcitabine equivalent to 227.7 mg, 1.139 g, or 2.277 g of gemcitabine HCl, USP. Each mL contains 38 mg of gemcitabine free base in Water for Injection equivalent to 43.27 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>67457-195-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (67457-195-01) * 10 mL in 1 VIAL, GLASS (67457-193-50) * 10 mL in 1 VIAL, GLASS (67457-194-10) </PackageDescription>
<NDC11Code>67457-0195-01</NDC11Code>
<ProductNDC>67457-195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Melphalan Hydrochloride</ProprietaryName>
<NonProprietaryName>Melphalan Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20130110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090270</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2020-11-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Melphalan Hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.</IndicationAndUsage>
<Description>Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or Lsarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ~2.5. Melphalan Hydrochloride for Injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and the inactive ingredient povidone 20 mg. Melphalan Hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6.0 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL. Melphalan Hydrochloride for Injection is administered intravenously.</Description>
</NDC>
<NDC>
<NDCCode>67457-215-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (67457-215-01) * 10 mL in 1 VIAL, GLASS (67457-213-50) * 10 mL in 1 VIAL, GLASS (67457-214-10) </PackageDescription>
<NDC11Code>67457-0215-01</NDC11Code>
<ProductNDC>67457-215</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Melphalan Hydrochloride</ProprietaryName>
<NonProprietaryName>Melphalan Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20130110</StartMarketingDate>
<EndMarketingDate>20260131</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090270</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130110</StartMarketingDatePackage>
<EndMarketingDatePackage>20260131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Melphalan Hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.</IndicationAndUsage>
<Description>Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or Lsarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the Lisomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ~ 2.5. Melphalan Hydrochloride for Injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and the inactive ingredient povidone 20 mg. Melphalan Hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6.0 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL. Melphalan Hydrochloride for Injection is administered intravenously.</Description>
</NDC>
<NDC>
<NDCCode>67457-381-58</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (67457-381-58) > 5 mL in 1 VIAL (67457-381-00) </PackageDescription>
<NDC11Code>67457-0381-58</NDC11Code>
<ProductNDC>67457-381</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol Decanoate</ProprietaryName>
<NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20140301</StartMarketingDate>
<EndMarketingDate>20230131</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075440</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20140301</StartMarketingDatePackage>
<EndMarketingDatePackage>20230131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol decanoate injection, 50 mg/mL and haloperidol decanoate injection, 100 mg/mL are indicated for the treatment of patients with schizophrenia who require prolonged parenteral antipsychotic therapy.</IndicationAndUsage>
<Description>Haloperidol decanoate is the decanoate ester of the butyrophenone, haloperidol decanoate injection. It has a markedly extended duration of effect. It is available in sesame oil in sterile form for intramuscular (IM) injection. The structural formula of haloperidol decanoate, 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl]-4 piperidinyl decanoate, is:. Haloperidol decanoate, USP is a white or almost white powder. It very soluble in alcohol, in methanol and in methylene chloride, practically insoluble in water. Haloperidol decanoate injection is clear, slightly viscous, colorless to pink or amber solution. Each mL of haloperidol decanoate injection for intramuscular injection contains 50 mg haloperidol (present as haloperidol decanoate, USP 70.52 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative. Each mL of haloperidol decanoate injection for intramuscular injection contains 100 mg haloperidol (present as haloperidol decanoate, USP 141.04 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>67457-409-13</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (67457-409-13) / 1 mL in 1 VIAL (67457-409-00) </PackageDescription>
<NDC11Code>67457-0409-13</NDC11Code>
<ProductNDC>67457-409</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol Decanoate</ProprietaryName>
<NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20140301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075440</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol decanoate injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.</IndicationAndUsage>
<Description>Haloperidol decanoate injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-Chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl]piperidin-4-yl decanoate. Haloperidol decanoate, USP is a white or almost white powder. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.11. Haloperidol decanoate is very soluble in alcohol, in methanol and in methylene chloride, practically insoluble in water. Each mL of haloperidol decanoate injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate, USP) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate, USP) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>67457-410-13</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (67457-410-13) / 1 mL in 1 VIAL (67457-410-00) </PackageDescription>
<NDC11Code>67457-0410-13</NDC11Code>
<ProductNDC>67457-410</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol Decanoate</ProprietaryName>
<NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20130423</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075440</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130423</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol decanoate injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.</IndicationAndUsage>
<Description>Haloperidol decanoate injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-Chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl]piperidin-4-yl decanoate. Haloperidol decanoate, USP is a white or almost white powder. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.11. Haloperidol decanoate is very soluble in alcohol, in methanol and in methylene chloride, practically insoluble in water. Each mL of haloperidol decanoate injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate, USP) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate, USP) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>67457-428-30</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (67457-428-30) / 30 mL in 1 VIAL (67457-428-00) </PackageDescription>
<NDC11Code>67457-0428-30</NDC11Code>
<ProductNDC>67457-428</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20140219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065407</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>TOBRAMYCIN SULFATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiella sp. Lower respiratory tract infections caused by P. aeruginosa, Klebsiella sp, Enterobacter sp, Serratia sp, E. coli, and S. aureus (penicillinase and non-penicillinase-producing strains). Serious central-nervous-system infections (meningitis) caused by susceptible organisms. Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella sp, and Enterobacter sp. Skin, bone, and skin-structure infections caused by P. aeruginosa, Proteus sp, E. coli, Klebsiella sp, Enterobacter sp, and S. aureus. Complicated and recurrent urinary tract infections caused by P. aeruginosa, Proteus sp (indole-positive and indole-negative), E. coli, Klebsiella sp, Enterobacter sp, Serratia sp, S. aureus, Providencia sp, and Citrobacter sp. Aminoglycosides, including tobramycin sulfate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram-negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulfate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGS box above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Tobramycin injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; phenol added as a preservative, 5 mg; sodium bisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment. pH (3.0 to 6.5). Tobramycin 80 mg/2 mL vial contains 1.568 mg (0.0682 mEq) of sodium. Tobramycin 1.2 g/30 mL vial contains 23.52 mg (1.0226 mEq) of sodium. Tobramycin sulfate is, O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the chemical formula (C18H37N5O9)2 5H2SO4. The molecular weight is 1,425.45. The structural formula for tobramycin is as follows.</Description>
</NDC>
<NDC>
<NDCCode>67457-473-22</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (67457-473-22) / 2 mL in 1 VIAL (67457-473-00) </PackageDescription>
<NDC11Code>67457-0473-22</NDC11Code>
<ProductNDC>67457-473</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20140819</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065407</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>TOBRAMYCIN SULFATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140819</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiella sp. Lower respiratory tract infections caused by P. aeruginosa, Klebsiella sp, Enterobacter sp, Serratia sp, E. coli, and S. aureus (penicillinase and non-penicillinase-producing strains). Serious central-nervous-system infections (meningitis) caused by susceptible organisms. Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella sp, and Enterobacter sp. Skin, bone, and skin-structure infections caused by P. aeruginosa, Proteus sp, E. coli, Klebsiella sp, Enterobacter sp, and S. aureus. Complicated and recurrent urinary tract infections caused by P. aeruginosa, Proteus sp (indole-positive and indole-negative), E. coli, Klebsiella sp, Enterobacter sp, Serratia sp, S. aureus, Providencia sp, and Citrobacter sp. Aminoglycosides, including tobramycin sulfate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram-negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulfate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGS box above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Tobramycin injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; phenol added as a preservative, 5 mg; sodium bisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment. pH (3.0 to 6.5). Tobramycin 80 mg/2 mL vial contains 1.568 mg (0.0682 mEq) of sodium. Tobramycin 1.2 g/30 mL vial contains 23.52 mg (1.0226 mEq) of sodium. Tobramycin sulfate is, O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the chemical formula (C18H37N5O9)2 5H2SO4. The molecular weight is 1,425.45. The structural formula for tobramycin is as follows.</Description>
</NDC>
<NDC>
<NDCCode>10544-507-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (10544-507-30)</PackageDescription>
<NDC11Code>10544-0507-30</NDC11Code>
<ProductNDC>10544-507</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077987</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate.</IndicationAndUsage>
<Description>Pravastatin sodium tablets USP are one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium USP is designated chemically as 1-Naphthalene-heptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. C 23H 35NaO 7 MW 446.52. Pravastatin sodium USP is an odorless, white to yellowish white, hygroscpic powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7. It is freely soluble in water and methanol, soluble in alcohol, very slightly soluble in acetonitrile and practically insoluble in ether, ethyl acetate and chloroform. Pravastatin sodium tablets USP are available for oral administration as 10 mg, 20 mg, 40 mg, and 80 mg tablets. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium stearate, mannitol, meglumine, microcrystalline cellulose and corn starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>63323-507-20</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (63323-507-20) > 10 mL in 1 VIAL (63323-507-01) </PackageDescription>
<NDC11Code>63323-0507-20</NDC11Code>
<ProductNDC>63323-507</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meropenem</ProprietaryName>
<NonProprietaryName>Meropenem</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20111014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091404</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>MEROPENEM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meropenem for injection (I.V.) is a penem antibacterial indicated for the treatment of: : 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) , 2 Complicated intra-abdominal infections (adult and pediatric patients). (1.2) , 3 Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) .</IndicationAndUsage>
<Description>Meropenem for injection, USP (I.V.) is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3-[[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is:. Meropenem for injection, USP (I.V.) is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 500 mg Meropenem for injection, USP (I.V.) vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq). Each 1 gram Meropenem for injection, USP (I.V.) vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq) [see Dosage and Administration (2.4)].</Description>
</NDC>
<NDC>
<NDCCode>63323-507-21</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (63323-507-21) > 10 mL in 1 VIAL (63323-507-19) </PackageDescription>
<NDC11Code>63323-0507-21</NDC11Code>
<ProductNDC>63323-507</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meropenem</ProprietaryName>
<NonProprietaryName>Meropenem</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20111014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091404</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>MEROPENEM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-03-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meropenem for injection (I.V.) is a penem antibacterial indicated for the treatment of: : 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) , 2 Complicated intra-abdominal infections (adult and pediatric patients). (1.2) , 3 Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) .</IndicationAndUsage>
<Description>Meropenem for injection, USP (I.V.) is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3-[[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is:. Meropenem for injection, USP (I.V.) is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 500 mg Meropenem for injection, USP (I.V.) vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq). Each 1 gram Meropenem for injection, USP (I.V.) vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq) [see Dosage and Administration (2.4)].</Description>
</NDC>
<NDC>
<NDCCode>63323-507-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (63323-507-25) > 10 mL in 1 VIAL (63323-507-43) </PackageDescription>
<NDC11Code>63323-0507-25</NDC11Code>
<ProductNDC>63323-507</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meropenem</ProprietaryName>
<NonProprietaryName>Meropenem</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20111014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091404</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>MEROPENEM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meropenem for injection (I.V.) is a penem antibacterial indicated for the treatment of: : 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). ( 1.1) , 2 Complicated intra-abdominal infections (adult and pediatric patients). ( 1.2) , 3 Bacterial meningitis (pediatric patients 3 months of age and older only). ( 1.3) .</IndicationAndUsage>
<Description>Meropenem for injection, USP (I.V.) is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3-[[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C 17H 25N 3O 5S3H 2O with a molecular weight of 437.52. Its structural formula is:. Meropenem for injection, USP (I.V.) is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 500 mg Meropenem for injection, USP (I.V.) vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq). Each 1 gram Meropenem for injection, USP (I.V.) vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq) [ see Dosage and Administration ( 2.4) ].</Description>
</NDC>
<NDC>
<NDCCode>67457-001-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (67457-001-10) > 10 mL in 1 VIAL (67457-001-00) </PackageDescription>
<NDC11Code>67457-0001-10</NDC11Code>
<ProductNDC>67457-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketamine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ketamine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20130604</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076092</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>KETAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130604</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67457-108-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (67457-108-10) / 10 mL in 1 VIAL (67457-108-00) </PackageDescription>
<NDC11Code>67457-0108-10</NDC11Code>
<ProductNDC>67457-108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketamine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ketamine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20130604</StartMarketingDate>
<EndMarketingDate>20230831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076092</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>KETAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130604</StartMarketingDatePackage>
<EndMarketingDatePackage>20230831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67457-118-50</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (67457-118-50) > 50 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>67457-0118-50</NDC11Code>
<ProductNDC>67457-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ascorbic Acid</ProprietaryName>
<NonProprietaryName>Ascorbic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19990601</StartMarketingDate>
<EndMarketingDate>20220331</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>ASCORBIC ACID</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Ascorbic Acid [CS], Vitamin C [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-04-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19990601</StartMarketingDatePackage>
<EndMarketingDatePackage>20220331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67457-124-10</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (67457-124-10) / 10 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>67457-0124-10</NDC11Code>
<ProductNDC>67457-124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diphenhydramine Hydrochloride</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20130509</StartMarketingDate>
<EndMarketingDate>20260228</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040498</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130509</StartMarketingDatePackage>
<EndMarketingDatePackage>20260228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diphenhydramine hydrochloride injection, is effective in adults and pediatric patients, other than premature infants and neonates, for the following conditions when diphenhydramine hydrochloride in the oral form is impractical.</IndicationAndUsage>
<Description>Diphenhydramine hydrochloride is an antihistamine drug having the chemical name 2-(Diphenylmethoxy)-N, N-dimethylethylamine hydrochloride. It occurs as a white, crystalline powder, is freely soluble in water and alcohol and has a molecular weight of 291.82. The molecular formula is C17H21NO HCl. The structural formula is as follows. Diphenhydramine hydrochloride in the parenteral form is a sterile, pyrogen-free solution available in a concentration of 50 mg of diphenhydramine hydrochloride per mL. The solutions for parenteral use have been adjusted to a pH between 5.0 and 6.0 with either sodium hydroxide or hydrochloric acid and contains 0.1 mg/mL benzethonium chloride as a germicidal agent.</Description>
</NDC>
<NDC>
<NDCCode>67457-134-50</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (67457-134-50) > 50 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>67457-0134-50</NDC11Code>
<ProductNDC>67457-134</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Chloride</ProprietaryName>
<NonProprietaryName>Magnesium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130314</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130314</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>As an electrolyte replenisher in magnesium deficiencies.</IndicationAndUsage>
<Description>Magnesium Chloride Injection is a sterile solution of Magnesium Chloride Hexahydrate in Water for Injection q.s. Each mL contains Magnesium Chloride Hexahydrate 200 mg, Sodium Chloride 9 mg, Benzyl Alcohol 1% as a preservative, Water for Injection, q.s. pH adjusted with Hydrochloric Acid and/or Sodium Hydroxide. Total osmolarity equivalent to 2.951 mOsm/mL. Contains 1.97 mEq of Mg++ and Cl- per mL. The structural formula is MgCl26H2O.</Description>
</NDC>
<NDC>
<NDCCode>67457-146-30</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (67457-146-30) > 30 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>67457-0146-30</NDC11Code>
<ProductNDC>67457-146</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vitamin B Complex</ProprietaryName>
<NonProprietaryName>Thiamine Hydrochloride, Riboflavin 5 Phosphate Sodium, Dexpanthenol And Niacinamide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130510</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>THIAMINE HYDROCHLORIDE; RIBOFLAVIN 5'-PHOSPHATE SODIUM; DEXPANTHENOL; NIACINAMIDE; PYRIDOXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100; 2; 2; 100; 2</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Analogs/Derivatives [Chemical/Ingredient], Vitamin B 6 [Chemical/Ingredient], Vitamin B6 Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>In disorders requiring parenteral administration of vitamins, i.e. pre- and post-operative treatment, when requirements are increased as in fever, severe burns, increased metabolism, pregnancy, gastrointestinal disorders interfering with intake or absorption of vitamins, prolonged or wasting diseases, alcoholism and where other deficiencies exist.</IndicationAndUsage>
<Description>Vitamin B-Complex 100 Injection is a sterile solution for intramuscular or slow intravenous injection comprised of vitamins which may be categorized as belonging to the vitamin B complex group. Each mL contains: Thiamine Hydrochloride 100 mg, Riboflavin 5’ Phosphate Sodium 2 mg, Pyridoxine Hydrochloride 2 mg, Dexpanthenol 2 mg, Niacinamide 100 mg, with Benzyl Alcohol 2% as preservative, in Water for Injection. Sodium Hydroxide and/or Hydrochloric Acid may have been used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>67457-148-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (67457-148-10) > 10 mL in 1 VIAL, MULTI-DOSE (67457-148-00)</PackageDescription>
<NDC11Code>67457-0148-10</NDC11Code>
<ProductNDC>67457-148</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesna</ProprietaryName>
<NonProprietaryName>Mesna</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120403</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076488</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>MESNA</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cytoprotective Agent [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-30</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>67457-153-03</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (67457-153-03) > 3 mL in 1 VIAL, GLASS (67457-153-00) </PackageDescription>
<NDC11Code>67457-0153-03</NDC11Code>
<ProductNDC>67457-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20021014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076217</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone hydrochloride injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride, USP (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>67457-153-09</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (67457-153-09) > 9 mL in 1 VIAL, GLASS (67457-153-99) </PackageDescription>
<NDC11Code>67457-0153-09</NDC11Code>
<ProductNDC>67457-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20021014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076217</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone hydrochloride injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride, USP (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>67457-153-18</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (67457-153-18) > 18 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>67457-0153-18</NDC11Code>
<ProductNDC>67457-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20021014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076217</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20031114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone hydrochloride injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride, USP (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>67457-162-02</NDCCode>
<PackageDescription>5 VIAL, MULTI-DOSE in 1 CARTON (67457-162-02) > 2 mL in 1 VIAL, MULTI-DOSE (67457-162-00) </PackageDescription>
<NDC11Code>67457-0162-02</NDC11Code>
<ProductNDC>67457-162</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sotradecol</ProprietaryName>
<NonProprietaryName>Tetradecyl Hydrogen Sulfate (ester)</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040541</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>TETRADECYL HYDROGEN SULFATE (ESTER)</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2021-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sotradecol (sodium tetradecyl sulfate injection) is indicated in the treatment of small uncomplicated varicose veins of the lower extremities that show simple dilation with competent valves. The benefit-to-risk ratio should be considered in selected patients who are great surgical risks.</IndicationAndUsage>
<Description>Sodium tetradecyl sulfate is an anionic surfactant which occurs as a white, waxy solid. The structural formula is as follows:. C14H29NaSO4 7-Ethyl-2-methyl-4-hendecanol sulfate sodium salt MW 316.44. Sotradecol (sodium tetradecyl sulfate injection) is a sterile nonpyrogenic solution for intravenous use as a sclerosing agent. 1% 20 mg/2 mL (10 mg/mL): Each mL contains sodium tetradecyl sulfate 10 mg, benzyl alcohol 0.02 mL and dibasic sodium phosphate, anhydrous 4.0 mg in Water for Injection. pH 7.9; monobasic sodium phosphate and/or sodium hydroxide added, if needed, for pH adjustment. 3% 60 mg/2 mL (30 mg/mL): Each mL contains sodium tetradecyl sulfate 30 mg, benzyl alcohol 0.02 mL and dibasic sodium phosphate, anhydrous 9.0 mg in Water for Injection. pH 7.9; monobasic sodium phosphate and/or sodium hydroxide added, if needed, for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>67457-163-02</NDCCode>
<PackageDescription>5 VIAL, MULTI-DOSE in 1 CARTON (67457-163-02) > 2 mL in 1 VIAL, MULTI-DOSE (67457-163-00) </PackageDescription>
<NDC11Code>67457-0163-02</NDC11Code>
<ProductNDC>67457-163</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sotradecol</ProprietaryName>
<NonProprietaryName>Tetradecyl Hydrogen Sulfate (ester)</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040541</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>TETRADECYL HYDROGEN SULFATE (ESTER)</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2021-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sotradecol (sodium tetradecyl sulfate injection) is indicated in the treatment of small uncomplicated varicose veins of the lower extremities that show simple dilation with competent valves. The benefit-to-risk ratio should be considered in selected patients who are great surgical risks.</IndicationAndUsage>
<Description>Sodium tetradecyl sulfate is an anionic surfactant which occurs as a white, waxy solid. The structural formula is as follows:. C14H29NaSO4 7-Ethyl-2-methyl-4-hendecanol sulfate sodium salt MW 316.44. Sotradecol (sodium tetradecyl sulfate injection) is a sterile nonpyrogenic solution for intravenous use as a sclerosing agent. 1% 20 mg/2 mL (10 mg/mL): Each mL contains sodium tetradecyl sulfate 10 mg, benzyl alcohol 0.02 mL and dibasic sodium phosphate, anhydrous 4.0 mg in Water for Injection. pH 7.9; monobasic sodium phosphate and/or sodium hydroxide added, if needed, for pH adjustment. 3% 60 mg/2 mL (30 mg/mL): Each mL contains sodium tetradecyl sulfate 30 mg, benzyl alcohol 0.02 mL and dibasic sodium phosphate, anhydrous 9.0 mg in Water for Injection. pH 7.9; monobasic sodium phosphate and/or sodium hydroxide added, if needed, for pH adjustment.</Description>
</NDC>
</NDCList>