{
"NDC": [
{
"NDCCode": "67850-024-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (67850-024-10) / 500 mg in 1 VIAL (67850-024-00) ",
"NDC11Code": "67850-0024-10",
"ProductNDC": "67850-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/500mg",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "67850-021-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (67850-021-10) / 1 g in 1 VIAL (67850-021-00) ",
"NDC11Code": "67850-0021-10",
"ProductNDC": "67850-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "67850-022-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (67850-022-10) / 2 g in 1 VIAL (67850-022-00) ",
"NDC11Code": "67850-0022-10",
"ProductNDC": "67850-022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/2g",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "67850-023-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (67850-023-10) / 250 mg in 1 VIAL (67850-023-00) ",
"NDC11Code": "67850-0023-10",
"ProductNDC": "67850-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/250mg",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "67850-031-10",
"PackageDescription": "10 VIAL in 1 CARTON (67850-031-10) / 1 g in 1 VIAL",
"NDC11Code": "67850-0031-10",
"ProductNDC": "67850-031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nafcillin",
"NonProprietaryName": "Nafcillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190305",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090560",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "NAFCILLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190305",
"SamplePackage": "N",
"IndicationAndUsage": "Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Test Methods). Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to methicillin resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs. Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Nafcillin for Injection, USP is semisynthetic penicillin derived from the penicillin nucleus,6-amino-penicillanic acid. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1- azabicyclo [3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows. C 21H 21N 2NaO 5S ●H 2O MW=454.47. Nafcillin for Injection, USP for the intramuscular or intravenous route of administration, contains nafacilin sodium as a sterile white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. The pH of the reconstituted solution is 6 - 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial and is buffered with approximately 38 mg sodium citrate per gram. The sodium content is about 66 mg [2.9 mEq] per gram."
},
{
"NDCCode": "67850-032-10",
"PackageDescription": "10 VIAL in 1 CARTON (67850-032-10) / 2 g in 1 VIAL",
"NDC11Code": "67850-0032-10",
"ProductNDC": "67850-032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nafcillin",
"NonProprietaryName": "Nafcillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190305",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090560",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "NAFCILLIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/2g",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190305",
"SamplePackage": "N",
"IndicationAndUsage": "Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Test Methods). Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to methicillin resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs. Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Nafcillin for Injection, USP is semisynthetic penicillin derived from the penicillin nucleus,6-amino-penicillanic acid. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1- azabicyclo [3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows. C 21H 21N 2NaO 5S ●H 2O MW=454.47. Nafcillin for Injection, USP for the intramuscular or intravenous route of administration, contains nafacilin sodium as a sterile white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. The pH of the reconstituted solution is 6 - 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial and is buffered with approximately 38 mg sodium citrate per gram. The sodium content is about 66 mg [2.9 mEq] per gram."
},
{
"NDCCode": "67850-041-10",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (67850-041-10) / 10 mL in 1 VIAL, SINGLE-USE (67850-041-00) ",
"NDC11Code": "67850-0041-10",
"ProductNDC": "67850-041",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202436",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181011",
"SamplePackage": "N"
},
{
"NDCCode": "67850-042-10",
"PackageDescription": "10 AMPULE in 1 CARTON (67850-042-10) / 10 mL in 1 AMPULE (67850-042-00) ",
"NDC11Code": "67850-0042-10",
"ProductNDC": "67850-042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190311",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202436",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190311",
"SamplePackage": "N",
"IndicationAndUsage": "Tranexamic Acid Injection is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.",
"Description": "Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid is a white crystalline powder. The structural formula is. Empirical Formula: C 8H 15NO 2Molecular Weight: 157.2. Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid and Water for Injection to 1 mL. The aqueous solution for injection has a pH of 6.5 to 8.0."
},
{
"NDCCode": "67850-071-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (67850-071-10) / 2 mL in 1 VIAL, SINGLE-DOSE (67850-071-00) ",
"NDC11Code": "67850-0071-10",
"ProductNDC": "67850-071",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215829",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210203",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil Hydrochloride Injection, USP is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong-Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.06. Molecular formula: C 27H 38N 2O 4∙ HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "67850-072-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (67850-072-10) / 4 mL in 1 VIAL, SINGLE-DOSE (67850-072-00) ",
"NDC11Code": "67850-0072-10",
"ProductNDC": "67850-072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215829",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210203",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil Hydrochloride Injection, USP is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong-Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.06. Molecular formula: C 27H 38N 2O 4∙ HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "67850-130-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (67850-130-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (67850-130-00) ",
"NDC11Code": "67850-0130-10",
"ProductNDC": "67850-130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin And Sulbactam For Injection",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201406",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "1; .5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,2 Klebsiella spp.2 (including K. pneumoniae2), Proteus mirabilis,2 Bacteroides fragilis,2 Enterobacter spp.,2 and Acinetobacter calcoaceticus.2. NOTE: For information on use in pediatric patients see PRECAUTIONS – Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae2), Bacteroides spp. (including B. fragilis), and Enterobacter spp.2. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,2 and Bacteroides spp.2 (including B. fragilis2). __________. 2Efficacy for this microorganism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies, when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. 1.5 g of Ampicillin and Sulbactam for Injection, USP (1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt) parenteral contains approximately 115 mg (5 mEq) of sodium. 3 g of Ampicillin and Sulbactam for Injection, USP (2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt) parenteral contains approximately 230 mg (10 mEq) of sodium."
},
{
"NDCCode": "67850-131-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (67850-131-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (67850-131-00) ",
"NDC11Code": "67850-0131-10",
"ProductNDC": "67850-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin And Sulbactam For Injection",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201406",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "2; 1",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,2 Klebsiella spp.2 (including K. pneumoniae2), Proteus mirabilis,2 Bacteroides fragilis,2 Enterobacter spp.,2 and Acinetobacter calcoaceticus.2. NOTE: For information on use in pediatric patients see PRECAUTIONS – Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae2), Bacteroides spp. (including B. fragilis), and Enterobacter spp.2. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,2 and Bacteroides spp.2 (including B. fragilis2). __________. 2Efficacy for this microorganism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies, when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. 1.5 g of Ampicillin and Sulbactam for Injection, USP (1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt) parenteral contains approximately 115 mg (5 mEq) of sodium. 3 g of Ampicillin and Sulbactam for Injection, USP (2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt) parenteral contains approximately 230 mg (10 mEq) of sodium."
},
{
"NDCCode": "67850-150-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (67850-150-10) / 10 mL in 1 VIAL, GLASS (67850-150-00) ",
"NDC11Code": "67850-0150-10",
"ProductNDC": "67850-150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209524",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20211201",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium for injection is a proton pump inhibitor (PPI) indicated in adults for the following: 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1), 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).",
"Description": "The active ingredient in pantoprazole sodium for injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH."
},
{
"NDCCode": "67850-150-25",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (67850-150-25) / 10 mL in 1 VIAL, GLASS (67850-150-00) ",
"NDC11Code": "67850-0150-25",
"ProductNDC": "67850-150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209524",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20211201",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium for injection is a proton pump inhibitor (PPI) indicated in adults for the following: 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1), 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).",
"Description": "The active ingredient in pantoprazole sodium for injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH."
},
{
"NDCCode": "10695-024-10",
"PackageDescription": "1 kg in 1 BOTTLE (10695-024-10)",
"NDC11Code": "10695-0024-10",
"ProductNDC": "10695-024",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Trichlormethiazide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20160930",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Willow Birch Pharma, Inc.",
"SubstanceName": "TRICHLORMETHIAZIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "13668-024-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (13668-024-10) ",
"NDC11Code": "13668-0024-10",
"ProductNDC": "13668-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078573",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-03-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20090205",
"SamplePackage": "N"
},
{
"NDCCode": "14445-024-05",
"PackageDescription": "10 kg in 1 DRUM (14445-024-05) ",
"NDC11Code": "14445-0024-05",
"ProductNDC": "14445-024",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240315",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Indoco Remedies Limited",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-05-22",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "15-MAR-24"
},
{
"NDCCode": "16714-024-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (16714-024-10)",
"NDC11Code": "16714-0024-10",
"ProductNDC": "16714-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078213",
"LabelerName": "Northstar RxLLC",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-10-30",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "17312-024-11",
"PackageDescription": "1 BOTTLE, DROPPER in 1 PACKAGE (17312-024-11) > 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "17312-0024-11",
"ProductNDC": "17312-024",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pink Eye",
"NonProprietaryName": "Aconitum Napellus - Apis Mellifera - Silver Nitrate - Euphrasia Stricta - Sodium Arsenate, Dibasic, Heptahydrate -",
"DosageFormName": "LIQUID",
"RouteName": "INTRAOCULAR",
"StartMarketingDate": "20120901",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "TRP Company",
"SubstanceName": "ACONITUM NAPELLUS; APIS MELLIFERA; SILVER NITRATE; EUPHRASIA STRICTA; SODIUM ARSENATE, DIBASIC, HEPTAHYDRATE",
"StrengthNumber": "6; 6; 12; 6; 11",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "According to homeopathic indications these ingredients temporarily relieve minor symptoms such as: Redness Burning sensations Watering Inflammation Sensation of grittiness and overnight crusting after diagnosis by a physician. * These statements are based on traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration."
},
{
"NDCCode": "21695-024-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (21695-024-10)",
"NDC11Code": "21695-0024-10",
"ProductNDC": "21695-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110620",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076361",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Levofloxacin tablets are indicated for the treatment of adults (≥ 18 years of age) with mild, moderate, and severe infections caused by susceptible strains of the designated microorganisms in the conditions listed in this section. Culture and susceptibility testing. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing the infection and to determine their susceptibility to levofloxacin [see Clinical Pharmacology (12.4)]. Therapy with levofloxacin may be initiated before results of these tests are known; once results become available, appropriate therapy should be selected. As with other drugs in this class, some strains of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with levofloxacin. Culture and susceptibility testing performed periodically during therapy will provide information about the continued susceptibility of the pathogens to the antimicrobial agent and also the possible emergence of bacterial resistance.",
"Description": "Levofloxacin is a synthetic broad-spectrum antibacterial agent for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. C18H20FN3O4½ H2O M.W. 370.38. Levofloxacin is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3 > Cu+2 > Zn+2 > Mg+2 > Ca+2. Excipients and Description of Dosage Form. Levofloxacin tablets are available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, iron oxide red, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, iron oxide black, iron oxide red, iron oxide yellow, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide., 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide."
},
{
"NDCCode": "23155-024-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (23155-024-10) ",
"NDC11Code": "23155-0024-10",
"ProductNDC": "23155-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204582",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180920",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.",
"Description": "Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 421.96. Chemically, buspirone hydrochloride is N-[4-[4-(2-Pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride. The empirical formula C21H31N5O2HCl is represented by the following structural formula. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The 30 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake."
},
{
"NDCCode": "31722-024-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (31722-024-10) ",
"NDC11Code": "31722-0024-10",
"ProductNDC": "31722-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxcarbazepine",
"NonProprietaryName": "Oxcarbazepine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215939",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "OXCARBAZEPINE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230310",
"SamplePackage": "N",
"IndicationAndUsage": "Oxcarbazepine tablets are indicated for use as monotherapy or adjunctive therapy in the treatment of partial-onset seizures in adults and as monotherapy in the treatment of partial-onset seizures in pediatric patients aged 4 years and above, and as adjunctive therapy in pediatric patients aged 2 years and above with partial-onset seizures.",
"Description": "Oxcarbazepine is an AED available as 150 mg, 300 mg, and 600 mg film-coated tablets for oral administration. Oxcarbazepine is 10,11-Dihydro-10-oxo-5 H-dibenz[b, f]azepine-5-carboxamide, and its structural formula is:. Oxcarbazepine USP is a light orange to creamish white or off-white powder. Sparingly soluble in acetic acid, slightly soluble in chloroform and practically insoluble in water. Its molecular weight is 252.268. Oxcarbazepine film-coated tablets USP contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, black iron oxide, iron oxide yellow, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide."
},
{
"NDCCode": "31722-024-31",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (31722-024-31) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "31722-0024-31",
"ProductNDC": "31722-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxcarbazepine",
"NonProprietaryName": "Oxcarbazepine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215939",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "OXCARBAZEPINE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220111",
"SamplePackage": "N",
"IndicationAndUsage": "Oxcarbazepine tablets are indicated for use as monotherapy or adjunctive therapy in the treatment of partial-onset seizures in adults and as monotherapy in the treatment of partial-onset seizures in pediatric patients aged 4 years and above, and as adjunctive therapy in pediatric patients aged 2 years and above with partial-onset seizures.",
"Description": "Oxcarbazepine is an AED available as 150 mg, 300 mg, and 600 mg film-coated tablets for oral administration. Oxcarbazepine is 10,11-Dihydro-10-oxo-5 H-dibenz[b, f]azepine-5-carboxamide, and its structural formula is:. Oxcarbazepine USP is a light orange to creamish white or off-white powder. Sparingly soluble in acetic acid, slightly soluble in chloroform and practically insoluble in water. Its molecular weight is 252.268. Oxcarbazepine film-coated tablets USP contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, black iron oxide, iron oxide yellow, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide."
},
{
"NDCCode": "33332-024-03",
"PackageDescription": "10 SYRINGE, GLASS in 1 CARTON (33332-024-03) / .5 mL in 1 SYRINGE, GLASS (33332-024-04) ",
"NDC11Code": "33332-0024-03",
"ProductNDC": "33332-024",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Afluria",
"NonProprietaryName": "Influenza A Virus A/victoria/4897/2022 Ivr-238 (h1n1) Antigen (propiolactone Inactivated), Influenza A Virus A/thailand/8/2022 Ivr-237 (h3n2) Antigen (propiolactone Inactivated), Influenza B Virus B/austria/1359417/2021 Bvr-26 Antigen (propiolactone Inactivated)",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20240701",
"EndMarketingDate": "20250731",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125254",
"LabelerName": "Seqirus PTY LTD.",
"SubstanceName": "INFLUENZA A VIRUS A/THAILAND/8/2022 IVR-237 (H3N2) ANTIGEN (PROPIOLACTONE INACTIVATED); INFLUENZA A VIRUS A/VICTORIA/4897/2022 IVR-238 (H1N1) ANTIGEN (PROPIOLACTONE INACTIVATED); INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 BVR-26 ANTIGEN (PROPIOLACTONE INACTIVATED)",
"StrengthNumber": "15; 15; 15",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL",
"Status": "Deprecated",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240701",
"EndMarketingDatePackage": "20250731",
"SamplePackage": "N",
"IndicationAndUsage": "AFLURIA® is an inactivated influenza vaccine indicated for active immunization for the prevention of disease caused by influenza A subtype viruses and type B virus contained in the vaccine. AFLURIA is approved for use in persons 6 months of age and older.",
"Description": "AFLURIA, Influenza Vaccine, is a sterile, clear, colorless to slightly opalescent injectable suspension for intramuscular use with some sediment that resuspends upon shaking to form a homogeneous suspension. AFLURIA is prepared from influenza viruses propagated in the allantoic fluid of embryonated chicken eggs. Following harvest, the viruses are purified in a sucrose density gradient using continuous flow zonal centrifugation. The purified viruses are inactivated with beta-propiolactone, and the virus particles are disrupted using sodium taurodeoxycholate to produce “split virions”. The disrupted viruses are further purified and suspended in a phosphate buffered isotonic solution. AFLURIA is standardized according to USPHS requirements for the 2024-2025 influenza season and is formulated to contain 45 mcg hemagglutinin (HA) per 0.5 mL dose in the recommended ratio of 15 mcg HA for each of the three influenza strains recommended for the 2024-2025 Northern Hemisphere influenza season:. A/Victoria/4897/2022 IVR-238 (an A/Victoria/4897/2022 (H1N1)pdm09-like virus); A/Thailand/8/2022 IVR-237 (an A/Thailand/8/2022 (H3N2)-like virus); and B/Austria/1359417/2021 BVR-26 (a B/Austria/1359417/2021-like virus). A 0.25 mL dose contains 7.5 mcg HA of each of the same influenza strains. Thimerosal, a mercury derivative, is not used in the manufacturing process for the single dose presentation. This presentation does not contain preservative. The multi-dose presentation contains thimerosal added as a preservative; each 0.5 mL dose contains 24.5 mcg of mercury and each 0.25 mL dose contains 12.25 mcg of mercury. A single 0.5 mL dose of AFLURIA contains sodium chloride (4.1 mg), monobasic sodium phosphate (80 mcg), dibasic sodium phosphate (300 mcg), monobasic potassium phosphate (20 mcg), potassium chloride (20 mcg), and calcium chloride (0.5 mcg). From the manufacturing process, each 0.5 mL dose may also contain residual amounts of sodium taurodeoxycholate (≤ 10 ppm), ovalbumin (< 1 mcg), sucrose (< 10 mcg), neomycin sulfate (≤ 61.5 nanograms [ng]), polymyxin B (≤ 10.5 ng), beta-propiolactone (< 2.3 ng) and hydrocortisone (≤ 0.56 ng). A single 0.25 mL dose of AFLURIA contains half of these quantities. The rubber tip cap and plunger used for the preservative-free, single-dose syringes and the rubber stoppers used for the multi-dose vial are not made with natural rubber latex."
},
{
"NDCCode": "37000-024-10",
"PackageDescription": "5.8 g in 1 PACKET (37000-024-10) ",
"NDC11Code": "37000-0024-10",
"ProductNDC": "37000-024",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Metamucil",
"ProprietaryNameSuffix": "Therapy For Regularity",
"NonProprietaryName": "Psyllium Husk",
"DosageFormName": "POWDER",
"RouteName": "ORAL",
"StartMarketingDate": "19941215",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M007",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "PSYLLIUM HUSK",
"StrengthNumber": "3.4",
"StrengthUnit": "g/5.8g",
"Status": "Active",
"LastUpdate": "2025-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19941215",
"SamplePackage": "N",
"IndicationAndUsage": "for relief of occasional constipation (irregularity). This product generally produces bowel movement in 12 to 72 hours."
},
{
"NDCCode": "37000-024-44",
"PackageDescription": "44 POUCH in 1 CARTON (37000-024-44) > .021 g in 1 POUCH (37000-024-10) ",
"NDC11Code": "37000-0024-44",
"ProductNDC": "37000-024",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Metamucil",
"ProprietaryNameSuffix": "Therapy For Regularity",
"NonProprietaryName": "Psyllium Husk",
"DosageFormName": "POWDER",
"RouteName": "ORAL",
"StartMarketingDate": "19941215",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "PSYLLIUM HUSK",
"StrengthNumber": "3.4",
"StrengthUnit": "g/5.8g",
"Status": "Deprecated",
"LastUpdate": "2021-12-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "19941215",
"SamplePackage": "N"
},
{
"NDCCode": "42537-024-02",
"PackageDescription": "10 mL in 1 BOTTLE, SPRAY (42537-024-02)",
"NDC11Code": "42537-0024-02",
"ProductNDC": "42537-024",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Qore 24",
"ProprietaryNameSuffix": "Antimicrobial Hand Purifier",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Qore Systems LLC",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Uses Convenient hand sanitize and 24 hr. antimicrobial barrier."
},
{
"NDCCode": "43066-024-10",
"PackageDescription": "10 BAG in 1 CARTON (43066-024-10) / 200 mL in 1 BAG",
"NDC11Code": "43066-0024-10",
"ProductNDC": "43066-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cardene Iv",
"NonProprietaryName": "Nicardipine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19920130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019734",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "NICARDIPINE HYDROCHLORIDE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200822",
"SamplePackage": "N",
"IndicationAndUsage": "CARDENE I.V. is a calcium channel blocker indicated for the short-term treatment of hypertension in adults when oral therapy is not feasible. (1.1).",
"Description": "CARDENE I.V. (nicardipine hydrochloride) is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). CARDENE I.V. for intravenous administration contains 20 mg (0.1 mg/mL) of nicardipine hydrochloride per 200 mL in either dextrose or sodium chloride or 40 mg (0.2 mg/mL) of nicardipine hydrochloride per 200 mL in sodium chloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure. Nicardipine hydrochloride is a greenish-yellow, odorless, crystalline powder that melts at about 169oC. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. CARDENE I.V. is available as a ready-to-use sterile, non-pyrogenic, clear, colorless to yellow, iso-osmotic solution for intravenous administration in a 200 mL GALAXY container with 20 mg (0.1 mg/mL) or 40 mg (0.2 mg/mL) nicardipine hydrochloride in either dextrose or sodium chloride. Nicardipine Hydrochloride in 4.8% Dextrose Injection. 20 mg in 200 mL (0.1 mg/mL). Each mL contains 0.1 mg nicardipine hydrochloride, 48 mg dextrose hydrous, USP, 0.0192 mg citric acid, anhydrous, USP, and 1.92 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. Nicardipine Hydrochloride in 0.86% Sodium Chloride Injection. 20 mg in 200 mL (0.1 mg/mL). Each mL contains 0.1 mg nicardipine hydrochloride, 8.6 mg sodium chloride, USP, 0.0192 mg citric acid, anhydrous, USP, and 1.92 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. Nicardipine Hydrochloride in 0.83% Sodium Chloride Injection. 40 mg in 200 mL (0.2 mg/mL). Each mL contains 0.2 mg nicardipine hydrochloride, 8.3 mg sodium chloride, USP, 0.0384 mg citric acid, anhydrous, USP, and 3.84 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. The GALAXY container is fabricated from multilayered plastic. Solutions are in contact with the polyethylene layer of the container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability and safety of the plastic have been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies."
},
{
"NDCCode": "46287-024-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (46287-024-10) / 15 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "46287-0024-10",
"ProductNDC": "46287-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Monobasic Potassium Phosphate And Dibasic Potassium Phosphate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190919",
"EndMarketingDate": "20260131",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212121",
"LabelerName": "CMP PHARMA, INC.",
"SubstanceName": "POTASSIUM PHOSPHATE, DIBASIC; POTASSIUM PHOSPHATE, MONOBASIC",
"StrengthNumber": "300; 175",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190919",
"EndMarketingDatePackage": "20260131",
"SamplePackage": "N",
"IndicationAndUsage": "POTASSIUM PHOSPHATES INJECTION is a phosphorus replacement product indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients 12 years of age and older when oral or enteral replacement is not possible, insufficient or contraindicated. (1.1), 2 for parenteral nutrition in adults weighing at least 45 kg and pediatric patients 12 years of age and older weighing at least 40 kg when oral or enteral nutrition is not possible, insufficient or contraindicated. (1.2) Limitations of Use: Safety has not been established for parenteral nutrition in adults weighing less than 45 kg or pediatric patients less than 12 years of age or weighing less than 40 kg due to the risk of aluminum toxicity. (1.2, 5.5, 8.4) .",
"Description": "POTASSIUM PHOSPHATES INJECTION, USP, is a phosphorus replacement product containing phosphorus 45 mmol/15 mL (3 mmol/mL) and potassium 71 mEq/15 mL (4.7 mEq/mL). It is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 15 mL partial fill single-dose glass vial. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. The solution is administered after dilution or admixing by the intravenous route. Each mL contains 175 mg of monobasic potassium phosphate and 300 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorous) and 4.7 mEq potassium (equivalent to 184 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.5 to 7.5. This product contains no more than 15,000 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolar concentration is 7.7 mOsmol/mL (calc)."
},
{
"NDCCode": "47621-024-03",
"PackageDescription": "10 kg in 1 DRUM (47621-024-03) ",
"NDC11Code": "47621-0024-03",
"ProductNDC": "47621-024",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "POWDER",
"StartMarketingDate": "20210127",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Raks Pharma Pvt. Limited",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "27-JAN-21"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67850-024-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (67850-024-10) / 500 mg in 1 VIAL (67850-024-00) </PackageDescription>
<NDC11Code>67850-0024-10</NDC11Code>
<ProductNDC>67850-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/500mg</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>67850-021-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (67850-021-10) / 1 g in 1 VIAL (67850-021-00) </PackageDescription>
<NDC11Code>67850-0021-10</NDC11Code>
<ProductNDC>67850-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>67850-022-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (67850-022-10) / 2 g in 1 VIAL (67850-022-00) </PackageDescription>
<NDC11Code>67850-0022-10</NDC11Code>
<ProductNDC>67850-022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/2g</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>67850-023-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (67850-023-10) / 250 mg in 1 VIAL (67850-023-00) </PackageDescription>
<NDC11Code>67850-0023-10</NDC11Code>
<ProductNDC>67850-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/250mg</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>67850-031-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (67850-031-10) / 1 g in 1 VIAL</PackageDescription>
<NDC11Code>67850-0031-10</NDC11Code>
<ProductNDC>67850-031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nafcillin</ProprietaryName>
<NonProprietaryName>Nafcillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190305</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090560</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>NAFCILLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Test Methods). Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to methicillin resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs. Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Nafcillin for Injection, USP is semisynthetic penicillin derived from the penicillin nucleus,6-amino-penicillanic acid. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1- azabicyclo [3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows. C 21H 21N 2NaO 5S ●H 2O MW=454.47. Nafcillin for Injection, USP for the intramuscular or intravenous route of administration, contains nafacilin sodium as a sterile white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. The pH of the reconstituted solution is 6 - 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial and is buffered with approximately 38 mg sodium citrate per gram. The sodium content is about 66 mg [2.9 mEq] per gram.</Description>
</NDC>
<NDC>
<NDCCode>67850-032-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (67850-032-10) / 2 g in 1 VIAL</PackageDescription>
<NDC11Code>67850-0032-10</NDC11Code>
<ProductNDC>67850-032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nafcillin</ProprietaryName>
<NonProprietaryName>Nafcillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190305</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090560</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>NAFCILLIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/2g</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Test Methods). Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to methicillin resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs. Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Nafcillin for Injection, USP is semisynthetic penicillin derived from the penicillin nucleus,6-amino-penicillanic acid. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1- azabicyclo [3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows. C 21H 21N 2NaO 5S ●H 2O MW=454.47. Nafcillin for Injection, USP for the intramuscular or intravenous route of administration, contains nafacilin sodium as a sterile white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. The pH of the reconstituted solution is 6 - 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial and is buffered with approximately 38 mg sodium citrate per gram. The sodium content is about 66 mg [2.9 mEq] per gram.</Description>
</NDC>
<NDC>
<NDCCode>67850-041-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (67850-041-10) / 10 mL in 1 VIAL, SINGLE-USE (67850-041-00) </PackageDescription>
<NDC11Code>67850-0041-10</NDC11Code>
<ProductNDC>67850-041</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202436</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67850-042-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (67850-042-10) / 10 mL in 1 AMPULE (67850-042-00) </PackageDescription>
<NDC11Code>67850-0042-10</NDC11Code>
<ProductNDC>67850-042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190311</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202436</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tranexamic Acid Injection is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.</IndicationAndUsage>
<Description>Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid is a white crystalline powder. The structural formula is. Empirical Formula: C 8H 15NO 2Molecular Weight: 157.2. Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid and Water for Injection to 1 mL. The aqueous solution for injection has a pH of 6.5 to 8.0.</Description>
</NDC>
<NDC>
<NDCCode>67850-071-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (67850-071-10) / 2 mL in 1 VIAL, SINGLE-DOSE (67850-071-00) </PackageDescription>
<NDC11Code>67850-0071-10</NDC11Code>
<ProductNDC>67850-071</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215829</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil Hydrochloride Injection, USP is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong-Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.06. Molecular formula: C 27H 38N 2O 4∙ HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>67850-072-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (67850-072-10) / 4 mL in 1 VIAL, SINGLE-DOSE (67850-072-00) </PackageDescription>
<NDC11Code>67850-0072-10</NDC11Code>
<ProductNDC>67850-072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215829</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil Hydrochloride Injection, USP is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong-Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.06. Molecular formula: C 27H 38N 2O 4∙ HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>67850-130-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (67850-130-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (67850-130-00) </PackageDescription>
<NDC11Code>67850-0130-10</NDC11Code>
<ProductNDC>67850-130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin And Sulbactam For Injection</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201406</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>1; .5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,2 Klebsiella spp.2 (including K. pneumoniae2), Proteus mirabilis,2 Bacteroides fragilis,2 Enterobacter spp.,2 and Acinetobacter calcoaceticus.2. NOTE: For information on use in pediatric patients see PRECAUTIONS – Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae2), Bacteroides spp. (including B. fragilis), and Enterobacter spp.2. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,2 and Bacteroides spp.2 (including B. fragilis2). __________. 2Efficacy for this microorganism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies, when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. 1.5 g of Ampicillin and Sulbactam for Injection, USP (1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt) parenteral contains approximately 115 mg (5 mEq) of sodium. 3 g of Ampicillin and Sulbactam for Injection, USP (2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt) parenteral contains approximately 230 mg (10 mEq) of sodium.</Description>
</NDC>
<NDC>
<NDCCode>67850-131-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (67850-131-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (67850-131-00) </PackageDescription>
<NDC11Code>67850-0131-10</NDC11Code>
<ProductNDC>67850-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin And Sulbactam For Injection</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201406</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; 1</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,2 Klebsiella spp.2 (including K. pneumoniae2), Proteus mirabilis,2 Bacteroides fragilis,2 Enterobacter spp.,2 and Acinetobacter calcoaceticus.2. NOTE: For information on use in pediatric patients see PRECAUTIONS – Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae2), Bacteroides spp. (including B. fragilis), and Enterobacter spp.2. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,2 and Bacteroides spp.2 (including B. fragilis2). __________. 2Efficacy for this microorganism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies, when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. 1.5 g of Ampicillin and Sulbactam for Injection, USP (1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt) parenteral contains approximately 115 mg (5 mEq) of sodium. 3 g of Ampicillin and Sulbactam for Injection, USP (2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt) parenteral contains approximately 230 mg (10 mEq) of sodium.</Description>
</NDC>
<NDC>
<NDCCode>67850-150-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (67850-150-10) / 10 mL in 1 VIAL, GLASS (67850-150-00) </PackageDescription>
<NDC11Code>67850-0150-10</NDC11Code>
<ProductNDC>67850-150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209524</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium for injection is a proton pump inhibitor (PPI) indicated in adults for the following: 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1), 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium for injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>67850-150-25</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (67850-150-25) / 10 mL in 1 VIAL, GLASS (67850-150-00) </PackageDescription>
<NDC11Code>67850-0150-25</NDC11Code>
<ProductNDC>67850-150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209524</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium for injection is a proton pump inhibitor (PPI) indicated in adults for the following: 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1), 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium for injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>10695-024-10</NDCCode>
<PackageDescription>1 kg in 1 BOTTLE (10695-024-10)</PackageDescription>
<NDC11Code>10695-0024-10</NDC11Code>
<ProductNDC>10695-024</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Trichlormethiazide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20160930</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Willow Birch Pharma, Inc.</LabelerName>
<SubstanceName>TRICHLORMETHIAZIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>13668-024-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (13668-024-10) </PackageDescription>
<NDC11Code>13668-0024-10</NDC11Code>
<ProductNDC>13668-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078573</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-03-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>14445-024-05</NDCCode>
<PackageDescription>10 kg in 1 DRUM (14445-024-05) </PackageDescription>
<NDC11Code>14445-0024-05</NDC11Code>
<ProductNDC>14445-024</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240315</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Indoco Remedies Limited</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-05-22</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>15-MAR-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>16714-024-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (16714-024-10)</PackageDescription>
<NDC11Code>16714-0024-10</NDC11Code>
<ProductNDC>16714-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078213</ApplicationNumber>
<LabelerName>Northstar RxLLC</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-10-30</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>17312-024-11</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 PACKAGE (17312-024-11) > 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>17312-0024-11</NDC11Code>
<ProductNDC>17312-024</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pink Eye</ProprietaryName>
<NonProprietaryName>Aconitum Napellus - Apis Mellifera - Silver Nitrate - Euphrasia Stricta - Sodium Arsenate, Dibasic, Heptahydrate -</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>INTRAOCULAR</RouteName>
<StartMarketingDate>20120901</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>TRP Company</LabelerName>
<SubstanceName>ACONITUM NAPELLUS; APIS MELLIFERA; SILVER NITRATE; EUPHRASIA STRICTA; SODIUM ARSENATE, DIBASIC, HEPTAHYDRATE</SubstanceName>
<StrengthNumber>6; 6; 12; 6; 11</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>According to homeopathic indications these ingredients temporarily relieve minor symptoms such as: Redness Burning sensations Watering Inflammation Sensation of grittiness and overnight crusting after diagnosis by a physician. * These statements are based on traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>21695-024-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (21695-024-10)</PackageDescription>
<NDC11Code>21695-0024-10</NDC11Code>
<ProductNDC>21695-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110620</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076361</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Levofloxacin tablets are indicated for the treatment of adults (≥ 18 years of age) with mild, moderate, and severe infections caused by susceptible strains of the designated microorganisms in the conditions listed in this section. Culture and susceptibility testing. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing the infection and to determine their susceptibility to levofloxacin [see Clinical Pharmacology (12.4)]. Therapy with levofloxacin may be initiated before results of these tests are known; once results become available, appropriate therapy should be selected. As with other drugs in this class, some strains of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with levofloxacin. Culture and susceptibility testing performed periodically during therapy will provide information about the continued susceptibility of the pathogens to the antimicrobial agent and also the possible emergence of bacterial resistance.</IndicationAndUsage>
<Description>Levofloxacin is a synthetic broad-spectrum antibacterial agent for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin. C18H20FN3O4½ H2O M.W. 370.38. Levofloxacin is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin is essentially constant (approximately 100 mg/mL). Levofloxacin is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al+3 > Cu+2 > Zn+2 > Mg+2 > Ca+2. Excipients and Description of Dosage Form. Levofloxacin tablets are available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, iron oxide red, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, iron oxide black, iron oxide red, iron oxide yellow, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide., 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>23155-024-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (23155-024-10) </PackageDescription>
<NDC11Code>23155-0024-10</NDC11Code>
<ProductNDC>23155-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204582</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 421.96. Chemically, buspirone hydrochloride is N-[4-[4-(2-Pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride. The empirical formula C21H31N5O2HCl is represented by the following structural formula. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The 30 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>31722-024-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (31722-024-10) </PackageDescription>
<NDC11Code>31722-0024-10</NDC11Code>
<ProductNDC>31722-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxcarbazepine</ProprietaryName>
<NonProprietaryName>Oxcarbazepine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215939</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>OXCARBAZEPINE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230310</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxcarbazepine tablets are indicated for use as monotherapy or adjunctive therapy in the treatment of partial-onset seizures in adults and as monotherapy in the treatment of partial-onset seizures in pediatric patients aged 4 years and above, and as adjunctive therapy in pediatric patients aged 2 years and above with partial-onset seizures.</IndicationAndUsage>
<Description>Oxcarbazepine is an AED available as 150 mg, 300 mg, and 600 mg film-coated tablets for oral administration. Oxcarbazepine is 10,11-Dihydro-10-oxo-5 H-dibenz[b, f]azepine-5-carboxamide, and its structural formula is:. Oxcarbazepine USP is a light orange to creamish white or off-white powder. Sparingly soluble in acetic acid, slightly soluble in chloroform and practically insoluble in water. Its molecular weight is 252.268. Oxcarbazepine film-coated tablets USP contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, black iron oxide, iron oxide yellow, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>31722-024-31</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (31722-024-31) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>31722-0024-31</NDC11Code>
<ProductNDC>31722-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxcarbazepine</ProprietaryName>
<NonProprietaryName>Oxcarbazepine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215939</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>OXCARBAZEPINE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxcarbazepine tablets are indicated for use as monotherapy or adjunctive therapy in the treatment of partial-onset seizures in adults and as monotherapy in the treatment of partial-onset seizures in pediatric patients aged 4 years and above, and as adjunctive therapy in pediatric patients aged 2 years and above with partial-onset seizures.</IndicationAndUsage>
<Description>Oxcarbazepine is an AED available as 150 mg, 300 mg, and 600 mg film-coated tablets for oral administration. Oxcarbazepine is 10,11-Dihydro-10-oxo-5 H-dibenz[b, f]azepine-5-carboxamide, and its structural formula is:. Oxcarbazepine USP is a light orange to creamish white or off-white powder. Sparingly soluble in acetic acid, slightly soluble in chloroform and practically insoluble in water. Its molecular weight is 252.268. Oxcarbazepine film-coated tablets USP contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, black iron oxide, iron oxide yellow, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>33332-024-03</NDCCode>
<PackageDescription>10 SYRINGE, GLASS in 1 CARTON (33332-024-03) / .5 mL in 1 SYRINGE, GLASS (33332-024-04) </PackageDescription>
<NDC11Code>33332-0024-03</NDC11Code>
<ProductNDC>33332-024</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Afluria</ProprietaryName>
<NonProprietaryName>Influenza A Virus A/victoria/4897/2022 Ivr-238 (h1n1) Antigen (propiolactone Inactivated), Influenza A Virus A/thailand/8/2022 Ivr-237 (h3n2) Antigen (propiolactone Inactivated), Influenza B Virus B/austria/1359417/2021 Bvr-26 Antigen (propiolactone Inactivated)</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20240701</StartMarketingDate>
<EndMarketingDate>20250731</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125254</ApplicationNumber>
<LabelerName>Seqirus PTY LTD.</LabelerName>
<SubstanceName>INFLUENZA A VIRUS A/THAILAND/8/2022 IVR-237 (H3N2) ANTIGEN (PROPIOLACTONE INACTIVATED); INFLUENZA A VIRUS A/VICTORIA/4897/2022 IVR-238 (H1N1) ANTIGEN (PROPIOLACTONE INACTIVATED); INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 BVR-26 ANTIGEN (PROPIOLACTONE INACTIVATED)</SubstanceName>
<StrengthNumber>15; 15; 15</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240701</StartMarketingDatePackage>
<EndMarketingDatePackage>20250731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>AFLURIA® is an inactivated influenza vaccine indicated for active immunization for the prevention of disease caused by influenza A subtype viruses and type B virus contained in the vaccine. AFLURIA is approved for use in persons 6 months of age and older.</IndicationAndUsage>
<Description>AFLURIA, Influenza Vaccine, is a sterile, clear, colorless to slightly opalescent injectable suspension for intramuscular use with some sediment that resuspends upon shaking to form a homogeneous suspension. AFLURIA is prepared from influenza viruses propagated in the allantoic fluid of embryonated chicken eggs. Following harvest, the viruses are purified in a sucrose density gradient using continuous flow zonal centrifugation. The purified viruses are inactivated with beta-propiolactone, and the virus particles are disrupted using sodium taurodeoxycholate to produce “split virions”. The disrupted viruses are further purified and suspended in a phosphate buffered isotonic solution. AFLURIA is standardized according to USPHS requirements for the 2024-2025 influenza season and is formulated to contain 45 mcg hemagglutinin (HA) per 0.5 mL dose in the recommended ratio of 15 mcg HA for each of the three influenza strains recommended for the 2024-2025 Northern Hemisphere influenza season:. A/Victoria/4897/2022 IVR-238 (an A/Victoria/4897/2022 (H1N1)pdm09-like virus); A/Thailand/8/2022 IVR-237 (an A/Thailand/8/2022 (H3N2)-like virus); and B/Austria/1359417/2021 BVR-26 (a B/Austria/1359417/2021-like virus). A 0.25 mL dose contains 7.5 mcg HA of each of the same influenza strains. Thimerosal, a mercury derivative, is not used in the manufacturing process for the single dose presentation. This presentation does not contain preservative. The multi-dose presentation contains thimerosal added as a preservative; each 0.5 mL dose contains 24.5 mcg of mercury and each 0.25 mL dose contains 12.25 mcg of mercury. A single 0.5 mL dose of AFLURIA contains sodium chloride (4.1 mg), monobasic sodium phosphate (80 mcg), dibasic sodium phosphate (300 mcg), monobasic potassium phosphate (20 mcg), potassium chloride (20 mcg), and calcium chloride (0.5 mcg). From the manufacturing process, each 0.5 mL dose may also contain residual amounts of sodium taurodeoxycholate (≤ 10 ppm), ovalbumin (< 1 mcg), sucrose (< 10 mcg), neomycin sulfate (≤ 61.5 nanograms [ng]), polymyxin B (≤ 10.5 ng), beta-propiolactone (< 2.3 ng) and hydrocortisone (≤ 0.56 ng). A single 0.25 mL dose of AFLURIA contains half of these quantities. The rubber tip cap and plunger used for the preservative-free, single-dose syringes and the rubber stoppers used for the multi-dose vial are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>37000-024-10</NDCCode>
<PackageDescription>5.8 g in 1 PACKET (37000-024-10) </PackageDescription>
<NDC11Code>37000-0024-10</NDC11Code>
<ProductNDC>37000-024</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Metamucil</ProprietaryName>
<ProprietaryNameSuffix>Therapy For Regularity</ProprietaryNameSuffix>
<NonProprietaryName>Psyllium Husk</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19941215</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M007</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>PSYLLIUM HUSK</SubstanceName>
<StrengthNumber>3.4</StrengthNumber>
<StrengthUnit>g/5.8g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19941215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for relief of occasional constipation (irregularity). This product generally produces bowel movement in 12 to 72 hours.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37000-024-44</NDCCode>
<PackageDescription>44 POUCH in 1 CARTON (37000-024-44) > .021 g in 1 POUCH (37000-024-10) </PackageDescription>
<NDC11Code>37000-0024-44</NDC11Code>
<ProductNDC>37000-024</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Metamucil</ProprietaryName>
<ProprietaryNameSuffix>Therapy For Regularity</ProprietaryNameSuffix>
<NonProprietaryName>Psyllium Husk</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19941215</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>PSYLLIUM HUSK</SubstanceName>
<StrengthNumber>3.4</StrengthNumber>
<StrengthUnit>g/5.8g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-12-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19941215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42537-024-02</NDCCode>
<PackageDescription>10 mL in 1 BOTTLE, SPRAY (42537-024-02)</PackageDescription>
<NDC11Code>42537-0024-02</NDC11Code>
<ProductNDC>42537-024</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Qore 24</ProprietaryName>
<ProprietaryNameSuffix>Antimicrobial Hand Purifier</ProprietaryNameSuffix>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Qore Systems LLC</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Uses Convenient hand sanitize and 24 hr. antimicrobial barrier.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43066-024-10</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (43066-024-10) / 200 mL in 1 BAG</PackageDescription>
<NDC11Code>43066-0024-10</NDC11Code>
<ProductNDC>43066-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cardene Iv</ProprietaryName>
<NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19920130</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019734</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200822</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CARDENE I.V. is a calcium channel blocker indicated for the short-term treatment of hypertension in adults when oral therapy is not feasible. (1.1).</IndicationAndUsage>
<Description>CARDENE I.V. (nicardipine hydrochloride) is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). CARDENE I.V. for intravenous administration contains 20 mg (0.1 mg/mL) of nicardipine hydrochloride per 200 mL in either dextrose or sodium chloride or 40 mg (0.2 mg/mL) of nicardipine hydrochloride per 200 mL in sodium chloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure. Nicardipine hydrochloride is a greenish-yellow, odorless, crystalline powder that melts at about 169oC. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. CARDENE I.V. is available as a ready-to-use sterile, non-pyrogenic, clear, colorless to yellow, iso-osmotic solution for intravenous administration in a 200 mL GALAXY container with 20 mg (0.1 mg/mL) or 40 mg (0.2 mg/mL) nicardipine hydrochloride in either dextrose or sodium chloride. Nicardipine Hydrochloride in 4.8% Dextrose Injection. 20 mg in 200 mL (0.1 mg/mL). Each mL contains 0.1 mg nicardipine hydrochloride, 48 mg dextrose hydrous, USP, 0.0192 mg citric acid, anhydrous, USP, and 1.92 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. Nicardipine Hydrochloride in 0.86% Sodium Chloride Injection. 20 mg in 200 mL (0.1 mg/mL). Each mL contains 0.1 mg nicardipine hydrochloride, 8.6 mg sodium chloride, USP, 0.0192 mg citric acid, anhydrous, USP, and 1.92 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. Nicardipine Hydrochloride in 0.83% Sodium Chloride Injection. 40 mg in 200 mL (0.2 mg/mL). Each mL contains 0.2 mg nicardipine hydrochloride, 8.3 mg sodium chloride, USP, 0.0384 mg citric acid, anhydrous, USP, and 3.84 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. The GALAXY container is fabricated from multilayered plastic. Solutions are in contact with the polyethylene layer of the container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability and safety of the plastic have been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>46287-024-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (46287-024-10) / 15 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>46287-0024-10</NDC11Code>
<ProductNDC>46287-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Monobasic Potassium Phosphate And Dibasic Potassium Phosphate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190919</StartMarketingDate>
<EndMarketingDate>20260131</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212121</ApplicationNumber>
<LabelerName>CMP PHARMA, INC.</LabelerName>
<SubstanceName>POTASSIUM PHOSPHATE, DIBASIC; POTASSIUM PHOSPHATE, MONOBASIC</SubstanceName>
<StrengthNumber>300; 175</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190919</StartMarketingDatePackage>
<EndMarketingDatePackage>20260131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>POTASSIUM PHOSPHATES INJECTION is a phosphorus replacement product indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients 12 years of age and older when oral or enteral replacement is not possible, insufficient or contraindicated. (1.1), 2 for parenteral nutrition in adults weighing at least 45 kg and pediatric patients 12 years of age and older weighing at least 40 kg when oral or enteral nutrition is not possible, insufficient or contraindicated. (1.2) Limitations of Use: Safety has not been established for parenteral nutrition in adults weighing less than 45 kg or pediatric patients less than 12 years of age or weighing less than 40 kg due to the risk of aluminum toxicity. (1.2, 5.5, 8.4) .</IndicationAndUsage>
<Description>POTASSIUM PHOSPHATES INJECTION, USP, is a phosphorus replacement product containing phosphorus 45 mmol/15 mL (3 mmol/mL) and potassium 71 mEq/15 mL (4.7 mEq/mL). It is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 15 mL partial fill single-dose glass vial. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. The solution is administered after dilution or admixing by the intravenous route. Each mL contains 175 mg of monobasic potassium phosphate and 300 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorous) and 4.7 mEq potassium (equivalent to 184 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.5 to 7.5. This product contains no more than 15,000 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolar concentration is 7.7 mOsmol/mL (calc).</Description>
</NDC>
<NDC>
<NDCCode>47621-024-03</NDCCode>
<PackageDescription>10 kg in 1 DRUM (47621-024-03) </PackageDescription>
<NDC11Code>47621-0024-03</NDC11Code>
<ProductNDC>47621-024</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20210127</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Raks Pharma Pvt. Limited</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>27-JAN-21</StartMarketingDatePackage>
</NDC>
</NDCList>