{
"NDC": [
{
"NDCCode": "67850-131-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (67850-131-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (67850-131-00) ",
"NDC11Code": "67850-0131-10",
"ProductNDC": "67850-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin And Sulbactam For Injection",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201406",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "2; 1",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,2 Klebsiella spp.2 (including K. pneumoniae2), Proteus mirabilis,2 Bacteroides fragilis,2 Enterobacter spp.,2 and Acinetobacter calcoaceticus.2. NOTE: For information on use in pediatric patients see PRECAUTIONS – Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae2), Bacteroides spp. (including B. fragilis), and Enterobacter spp.2. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,2 and Bacteroides spp.2 (including B. fragilis2). __________. 2Efficacy for this microorganism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies, when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. 1.5 g of Ampicillin and Sulbactam for Injection, USP (1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt) parenteral contains approximately 115 mg (5 mEq) of sodium. 3 g of Ampicillin and Sulbactam for Injection, USP (2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt) parenteral contains approximately 230 mg (10 mEq) of sodium."
},
{
"NDCCode": "67850-021-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (67850-021-10) / 1 g in 1 VIAL (67850-021-00) ",
"NDC11Code": "67850-0021-10",
"ProductNDC": "67850-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "67850-022-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (67850-022-10) / 2 g in 1 VIAL (67850-022-00) ",
"NDC11Code": "67850-0022-10",
"ProductNDC": "67850-022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/2g",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "67850-023-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (67850-023-10) / 250 mg in 1 VIAL (67850-023-00) ",
"NDC11Code": "67850-0023-10",
"ProductNDC": "67850-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/250mg",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "67850-024-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (67850-024-10) / 500 mg in 1 VIAL (67850-024-00) ",
"NDC11Code": "67850-0024-10",
"ProductNDC": "67850-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/500mg",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "67850-031-10",
"PackageDescription": "10 VIAL in 1 CARTON (67850-031-10) / 1 g in 1 VIAL",
"NDC11Code": "67850-0031-10",
"ProductNDC": "67850-031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nafcillin",
"NonProprietaryName": "Nafcillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190305",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090560",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "NAFCILLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190305",
"SamplePackage": "N",
"IndicationAndUsage": "Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Test Methods). Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to methicillin resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs. Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Nafcillin for Injection, USP is semisynthetic penicillin derived from the penicillin nucleus,6-amino-penicillanic acid. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1- azabicyclo [3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows. C 21H 21N 2NaO 5S ●H 2O MW=454.47. Nafcillin for Injection, USP for the intramuscular or intravenous route of administration, contains nafacilin sodium as a sterile white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. The pH of the reconstituted solution is 6 - 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial and is buffered with approximately 38 mg sodium citrate per gram. The sodium content is about 66 mg [2.9 mEq] per gram."
},
{
"NDCCode": "67850-032-10",
"PackageDescription": "10 VIAL in 1 CARTON (67850-032-10) / 2 g in 1 VIAL",
"NDC11Code": "67850-0032-10",
"ProductNDC": "67850-032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nafcillin",
"NonProprietaryName": "Nafcillin Injection",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190305",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090560",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "NAFCILLIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/2g",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190305",
"SamplePackage": "N",
"IndicationAndUsage": "Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Test Methods). Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to methicillin resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs. Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Nafcillin for Injection, USP is semisynthetic penicillin derived from the penicillin nucleus,6-amino-penicillanic acid. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1- azabicyclo [3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows. C 21H 21N 2NaO 5S ●H 2O MW=454.47. Nafcillin for Injection, USP for the intramuscular or intravenous route of administration, contains nafacilin sodium as a sterile white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. The pH of the reconstituted solution is 6 - 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial and is buffered with approximately 38 mg sodium citrate per gram. The sodium content is about 66 mg [2.9 mEq] per gram."
},
{
"NDCCode": "67850-041-10",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (67850-041-10) / 10 mL in 1 VIAL, SINGLE-USE (67850-041-00) ",
"NDC11Code": "67850-0041-10",
"ProductNDC": "67850-041",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202436",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181011",
"SamplePackage": "N"
},
{
"NDCCode": "67850-042-10",
"PackageDescription": "10 AMPULE in 1 CARTON (67850-042-10) / 10 mL in 1 AMPULE (67850-042-00) ",
"NDC11Code": "67850-0042-10",
"ProductNDC": "67850-042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190311",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202436",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190311",
"SamplePackage": "N",
"IndicationAndUsage": "Tranexamic Acid Injection is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.",
"Description": "Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid is a white crystalline powder. The structural formula is. Empirical Formula: C 8H 15NO 2Molecular Weight: 157.2. Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid and Water for Injection to 1 mL. The aqueous solution for injection has a pH of 6.5 to 8.0."
},
{
"NDCCode": "67850-071-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (67850-071-10) / 2 mL in 1 VIAL, SINGLE-DOSE (67850-071-00) ",
"NDC11Code": "67850-0071-10",
"ProductNDC": "67850-071",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215829",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210203",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil Hydrochloride Injection, USP is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong-Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.06. Molecular formula: C 27H 38N 2O 4∙ HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "67850-072-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (67850-072-10) / 4 mL in 1 VIAL, SINGLE-DOSE (67850-072-00) ",
"NDC11Code": "67850-0072-10",
"ProductNDC": "67850-072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215829",
"LabelerName": "Methapharm Inc.",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210203",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil Hydrochloride Injection, USP is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong-Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.06. Molecular formula: C 27H 38N 2O 4∙ HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "67850-130-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (67850-130-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (67850-130-00) ",
"NDC11Code": "67850-0130-10",
"ProductNDC": "67850-130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin And Sulbactam For Injection",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201406",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "1; .5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,2 Klebsiella spp.2 (including K. pneumoniae2), Proteus mirabilis,2 Bacteroides fragilis,2 Enterobacter spp.,2 and Acinetobacter calcoaceticus.2. NOTE: For information on use in pediatric patients see PRECAUTIONS – Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae2), Bacteroides spp. (including B. fragilis), and Enterobacter spp.2. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,2 and Bacteroides spp.2 (including B. fragilis2). __________. 2Efficacy for this microorganism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies, when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. 1.5 g of Ampicillin and Sulbactam for Injection, USP (1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt) parenteral contains approximately 115 mg (5 mEq) of sodium. 3 g of Ampicillin and Sulbactam for Injection, USP (2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt) parenteral contains approximately 230 mg (10 mEq) of sodium."
},
{
"NDCCode": "67850-150-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (67850-150-10) / 10 mL in 1 VIAL, GLASS (67850-150-00) ",
"NDC11Code": "67850-0150-10",
"ProductNDC": "67850-150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209524",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20211201",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium for injection is a proton pump inhibitor (PPI) indicated in adults for the following: 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1), 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).",
"Description": "The active ingredient in pantoprazole sodium for injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH."
},
{
"NDCCode": "67850-150-25",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (67850-150-25) / 10 mL in 1 VIAL, GLASS (67850-150-00) ",
"NDC11Code": "67850-0150-25",
"ProductNDC": "67850-150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209524",
"LabelerName": "Methapharm, Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20211201",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium for injection is a proton pump inhibitor (PPI) indicated in adults for the following: 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1), 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).",
"Description": "The active ingredient in pantoprazole sodium for injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH."
},
{
"NDCCode": "10695-131-10",
"PackageDescription": "1 kg in 1 CONTAINER (10695-131-10) ",
"NDC11Code": "10695-0131-10",
"ProductNDC": "10695-131",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Naltrexone Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240528",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Willow Birch Pharma, LLC",
"SubstanceName": "NALTREXONE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-12-19",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "28-MAY-24"
},
{
"NDCCode": "10812-131-10",
"PackageDescription": "1 TUBE in 1 CARTON (10812-131-10) > 50 mL in 1 TUBE",
"NDC11Code": "10812-0131-10",
"ProductNDC": "10812-131",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Neutrogena Men Triple Protect Face",
"ProprietaryNameSuffix": "Spf20",
"NonProprietaryName": "Ensulizole, Octinoxate, And Oxybenzone",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20111201",
"EndMarketingDate": "20171101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Johnson & Johnson Consumer Inc.",
"SubstanceName": "ENSULIZOLE; OCTINOXATE; OXYBENZONE",
"StrengthNumber": "10; 60; 20",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2017-11-08"
},
{
"NDCCode": "11788-131-10",
"PackageDescription": "1000 TABLET, COATED in 1 BOTTLE (11788-131-10) ",
"NDC11Code": "11788-0131-10",
"ProductNDC": "11788-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin",
"NonProprietaryName": "Rosuvastatin",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206513",
"LabelerName": "AiPing Pharmaceutical, Inc.",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to:.",
"Description": "Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor.The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium is (C22H27FN3O6S)2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white amorphous powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets, USP for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, polacrilin potassium, magnesium stearate, hypromellose, titanium dioxide, triacetin, ferric oxide yellow, ferric oxide red, FD&C Yellow #6 aluminum lake, FD&C Blue #2/Indigo carmine aluminum lake, and FD&C Red #40/Allura red AC aluminum lake.FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "13533-131-01",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (13533-131-01) / .5 mL in 1 VIAL, SINGLE-DOSE (13533-131-00) ",
"NDC11Code": "13533-0131-01",
"ProductNDC": "13533-131",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Tdvax",
"NonProprietaryName": "Tetanus And Diphtheria Toxoids Adsorbed",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19700727",
"EndMarketingDate": "20250331",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101322",
"LabelerName": "Grifols USA, LLC",
"SubstanceName": "CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "2; 2",
"StrengthUnit": "[Lf]/.5mL; [Lf]/.5mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19700727",
"EndMarketingDatePackage": "20250331",
"SamplePackage": "N",
"IndicationAndUsage": "MassBiologics' TDVAX is a vaccine indicated for active immunization for the prevention of tetanus and diphtheria. This vaccine is approved for use in persons 7 years of age and older.",
"Description": "TDVAX manufactured by MassBiologics is a sterile vaccine for intramuscular injection. After shaking, the vaccine appears as a homogeneous milky white suspension. Each 0.5 mL dose of MassBiologics' TDVAX is formulated to contain the following active ingredients: 2 Lf of tetanus toxoid and 2 Lf of diphtheria toxoid. Each 0.5 mL dose also contains aluminum adjuvant (not more than 0.53 mg aluminum by assay), < 100 mcg (0.02%) of residual formaldehyde, and a trace amount of thimerosal [mercury derivative, (≤ 0.3 mcg mercury/dose)] (not as a preservative) from the manufacturing process. The Corynebacterium diphtheriaeand Clostridium tetaniorganisms are grown on modified Mueller's media 1, 2which contains bovine extracts. The bovine material used in these extracts is sourced from countries which the United States Department of Agriculture has determined neither have nor present an undue risk for bovine spongiform encephalopathy. Tetanus and diphtheria toxins produced during growth of the cultures are detoxified with formaldehyde. The detoxified materials are then separately purified by ammonium sulfate fractionation. The diphtheria toxoid is further purified by column chromatography. The tetanus and diphtheria toxoids are individually adsorbed onto aluminum phosphate. The tetanus and diphtheria toxoids induce at least 2 units and 1 unit of antitoxin per mL of serum, respectively, in the guinea pig potency test."
},
{
"NDCCode": "14096-131-02",
"PackageDescription": "10 kg in 1 DRUM (14096-131-02) ",
"NDC11Code": "14096-0131-02",
"ProductNDC": "14096-131",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20080101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Apicore US LLC",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "01-APR-16"
},
{
"NDCCode": "14789-131-05",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (14789-131-05) / 10 mL in 1 VIAL, GLASS (14789-131-07) ",
"NDC11Code": "14789-0131-05",
"ProductNDC": "14789-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Water",
"NonProprietaryName": "Water",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20230925",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217536",
"LabelerName": "Nexus Pharmaceuticals Inc",
"SubstanceName": "WATER",
"StrengthNumber": "10",
"StrengthUnit": "mL/10mL",
"Status": "Deprecated",
"LastUpdate": "2024-10-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230925",
"SamplePackage": "N",
"IndicationAndUsage": "This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.",
"Description": "This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. For intravenous. injection, add sufficient solute to make an approximately isotonic solution. Water for Injection, USP is chemically designated H2O. The glass vial is Type I or II borosilicate glass and meets the requirements of the powdered glass test according to the USP standards."
},
{
"NDCCode": "17478-131-01",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (17478-131-01) > .5 mL in 1 VIAL, SINGLE-DOSE (17478-131-00)",
"NDC11Code": "17478-0131-01",
"ProductNDC": "17478-131",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Tetanus And Diphtheria Toxoids Adsorbed",
"NonProprietaryName": "Tetanus And Diphtheria Toxoids Adsorbed",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20130215",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101322",
"LabelerName": "Akorn, Inc.",
"SubstanceName": "CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "2; 2",
"StrengthUnit": "[Lf]/.5mL; [Lf]/.5mL",
"Pharm_Classes": "Inactivated Clostridium Tetani Vaccine [EPC],Actively Acquired Immunity [PE],Vaccines, Inactivated [Chemical/Ingredient],Tetanus Toxoid [Chemical/Ingredient],Inactivated Corynebacterium Diphtheriae Vaccine [EPC],Actively Acquired Immunity [PE],Vaccines, Inactivated [Chemical/Ingredient],Diphtheria Toxoid [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-03-20"
},
{
"NDCCode": "24765-131-01",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 CARTON (24765-131-01) / 800 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "24765-0131-01",
"ProductNDC": "24765-131",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Tm-c7 Oral Care",
"NonProprietaryName": "Sodium Fluoride",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20210305",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part355",
"LabelerName": "Pharmacal-International Co., Ltd",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": ".02",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-08-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210305",
"SamplePackage": "N"
},
{
"NDCCode": "33261-131-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (33261-131-10)",
"NDC11Code": "33261-0131-10",
"ProductNDC": "33261-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040712",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC],Phenothiazines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Promethazine hydrochloride tablets, USP are useful for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of. anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.",
"Description": "Each 12.5 mg promethazine hydrochloride tablet for oral administration contains 12.5 mg promethazine hydrochloride. Each 25 mg promethazine hydrochloride tablet for oral administration contains 25 mg promethazine hydrochloride. Each 50 mg promethazine hydrochloride tablet for oral administration contains 50 mg promethazine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, and methylcellulose. In addition, 50 mg tablet contains FD&C Red #40 and 12.5 mg tablet contains FD&C Yellow #6. Promethazine hydrochloride is a racemic compound; the empirical formula is. C17H20N2SHCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as. 10H-Phenothiazine-10-ethanamine, N,N,_-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water and soluble in alcohol."
},
{
"NDCCode": "33342-131-10",
"PackageDescription": "90 TABLET in 1 BOTTLE (33342-131-10) ",
"NDC11Code": "33342-0131-10",
"ProductNDC": "33342-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Candesartan Cilexetil And Hydrochlorothiazide",
"NonProprietaryName": "Candesartan Cilexetil And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150307",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204100",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "CANDESARTAN CILEXETIL; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "16; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150307",
"SamplePackage": "N",
"IndicationAndUsage": "Candesartan cilexitil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with candesartan cilexitil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. This fixed dose combination is not indicated for initial therapy (see DOSAGE AND ADMINISTRATION).",
"Description": "Candesartan cilexetil and hydrochlorothiazide tablets combines an angiotensin II receptor (type AT1) antagonist and a diuretic, hydrochlorothiazide. Candesartan cilexetil, USP a nonpeptide, is chemically described as (±)-1-Hydroxyethyl 2-ethoxy-1-[p-(o-1H-tetrazol-5- ylphenyl)benzyl]-7-benzimidazolecarboxylate, cyclohexyl carbonate (ester). Its empirical formula is C33H34N6O6, and its structural formula is. Candesartan cilexetil USP is a white to off-white powder with a molecular weight of 610.67. It is practically insoluble in water and sparingly soluble in methanol. Candesartan cilexetil USP is a racemic mixture containing one chiral center at the cyclohexyloxycarbonyloxy ethyl ester group. Following oral administration, candesartan cilexetil USP undergoes hydrolysis at the ester link to form the active drug, candesartan, which is achiral. Hydrochlorothiazide USP is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide USP is a white, or practically white, crystalline powder with a molecular weight of 297.72, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Candesartan cilexitil and hydrochlorothiazide tablets are available for oral administration in three tablet strengths of candesartan cilexetil USP and hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 16 mg/12.5 mg contain 16 mg of candesartan cilexetil USP and 12.5 mg of hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 32 mg/12.5 mg contain 32 mg of candesartan cilexetil USP and 12.5 mg of hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 32 mg/25 mg contain 32 mg of candesartan cilexetil USP and 25 mg of hydrochlorothiazide USP. The inactive ingredients of the tablets are carboxymethylcellulose calcium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, corn starch, glycerin, and ferric oxide (yellow). Ferric oxide (red) is also added to the 16 mg/12.5 mg and 32 mg/25 mg tablets as colorant. FDA approved organic impurities acceptance criteria differs from USP test."
},
{
"NDCCode": "33342-131-12",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (33342-131-12) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "33342-0131-12",
"ProductNDC": "33342-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Candesartan Cilexetil And Hydrochlorothiazide",
"NonProprietaryName": "Candesartan Cilexetil And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150307",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204100",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "CANDESARTAN CILEXETIL; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "16; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150307",
"SamplePackage": "N",
"IndicationAndUsage": "Candesartan cilexitil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with candesartan cilexitil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. This fixed dose combination is not indicated for initial therapy (see DOSAGE AND ADMINISTRATION).",
"Description": "Candesartan cilexetil and hydrochlorothiazide tablets combines an angiotensin II receptor (type AT1) antagonist and a diuretic, hydrochlorothiazide. Candesartan cilexetil, USP a nonpeptide, is chemically described as (±)-1-Hydroxyethyl 2-ethoxy-1-[p-(o-1H-tetrazol-5- ylphenyl)benzyl]-7-benzimidazolecarboxylate, cyclohexyl carbonate (ester). Its empirical formula is C33H34N6O6, and its structural formula is. Candesartan cilexetil USP is a white to off-white powder with a molecular weight of 610.67. It is practically insoluble in water and sparingly soluble in methanol. Candesartan cilexetil USP is a racemic mixture containing one chiral center at the cyclohexyloxycarbonyloxy ethyl ester group. Following oral administration, candesartan cilexetil USP undergoes hydrolysis at the ester link to form the active drug, candesartan, which is achiral. Hydrochlorothiazide USP is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide USP is a white, or practically white, crystalline powder with a molecular weight of 297.72, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Candesartan cilexitil and hydrochlorothiazide tablets are available for oral administration in three tablet strengths of candesartan cilexetil USP and hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 16 mg/12.5 mg contain 16 mg of candesartan cilexetil USP and 12.5 mg of hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 32 mg/12.5 mg contain 32 mg of candesartan cilexetil USP and 12.5 mg of hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 32 mg/25 mg contain 32 mg of candesartan cilexetil USP and 25 mg of hydrochlorothiazide USP. The inactive ingredients of the tablets are carboxymethylcellulose calcium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, corn starch, glycerin, and ferric oxide (yellow). Ferric oxide (red) is also added to the 16 mg/12.5 mg and 32 mg/25 mg tablets as colorant. FDA approved organic impurities acceptance criteria differs from USP test."
},
{
"NDCCode": "42291-131-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (42291-131-10)",
"NDC11Code": "42291-0131-10",
"ProductNDC": "42291-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acarbose",
"NonProprietaryName": "Acarbose",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091343",
"LabelerName": "AvKARE, Inc.",
"SubstanceName": "ACARBOSE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "alpha Glucosidase Inhibitors [MoA],alpha-Glucosidase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2016-01-22"
},
{
"NDCCode": "42571-131-29",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (42571-131-29) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "42571-0131-29",
"ProductNDC": "42571-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nevirapine",
"NonProprietaryName": "Nevirapine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203080",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "NEVIRAPINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 3A Inducers [MoA], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120522",
"SamplePackage": "N",
"IndicationAndUsage": "Nevirapine tablet is indicated in combination with other antiretroviral agents for the treatment of human immunodeficiency virus (HIV-1) infection in adults and pediatric patients 15 days and older [see Clinical Studies (14.1, 14.2)] . Limitations of Use. Based on serious and life-threatening hepatotoxicity observed in controlled and uncontrolled trials, nevirapine tablet is not recommended to be initiated, unless the benefit outweighs the risk, in: 1 adult females with CD4 +cell counts greater than 250 cells/mm 3or , 2 adult males with CD4 +cell counts greater than 400 cells/mm 3[see Warnings and Precautions (5.1)] . .",
"Description": "Nevirapine tablets USP, 200 mg is the brand name for nevirapine, a non-nucleoside reverse transcriptase inhibitor (NNRTI) with activity against Human Immunodeficiency Virus Type 1 (HIV-1). Nevirapine USP is structurally a member of the dipyridodiazepinone chemical class of compounds. The chemical name of nevirapine is 11-cyclopropyl-5, 11-dihydro-4-methyl-6H-dipyrido [3,2-b:2',3'-e][1,4] diazepin-6-one. Nevirapine USP is a white to off-white crystalline powder with the molecular weight of 266.30 and the molecular formula C 15H 14N 4O. Nevirapine has the following structural formula:. Nevirapine tablets USP, 200 mg is for oral administration. Each tablet contains 200 mg of nevirapine anhydrous and the inactive ingredients microcrystalline cellulose, lactose monohydrate, colloidal silicon dioxide, magnesium stearate, povidone, and Sodium starch glycolate."
},
{
"NDCCode": "42794-131-10",
"PackageDescription": "60 TABLET in 1 BOTTLE (42794-131-10) ",
"NDC11Code": "42794-0131-10",
"ProductNDC": "42794-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Liomny",
"NonProprietaryName": "Liothyronine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200295",
"LabelerName": "SIGMAPHARM LABORATORIES, LLC",
"SubstanceName": "LIOTHYRONINE SODIUM",
"StrengthNumber": "5",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Triiodothyronine [CS], l-Triiodothyronine [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251121",
"SamplePackage": "N",
"IndicationAndUsage": "LIOMNY is an L-triiodothyronine (T3) indicated for: 1 Hypothyroidism: As replacement in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism ( 1.1) , 2 Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression: As an adjunct to surgery and radioiodine therapy in the management of well-differentiated thyroid cancer ( 1.2) , 3 Thyroid Suppression Test: As a diagnostic agent in suppression tests to differentiate suspected mild hyperthyroidism or thyroid gland autonomy ( 1.3) .",
"Description": "LIOMNY contains the active ingredient, liothyronine (L-triiodothyronine or LT3), a synthetic form of a thyroid hormone liothyronine in sodium salt form. It is chemically designated as L-Tyrosine, O-(4-hydroxy-3-iodophenyl)-3,5-diiodo-, monosodium salt. The molecular formula, molecular weight and structural formula of liothyronine sodium are given below. LIOMNY contains liothyronine sodium equivalent to liothyronine in 5 mcg, 25 mcg, and 50 mcg. Inactive ingredients consist of calcium sulfate dihydrate, corn starch, gelatin, magnesium stearate and mannitol."
},
{
"NDCCode": "43744-131-10",
"PackageDescription": "1 g in 1 DRUM (43744-131-10)",
"NDC11Code": "43744-0131-10",
"ProductNDC": "43744-131",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Carprofen",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110103",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "CARPROFEN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "43744-131-15",
"PackageDescription": "10 g in 1 DRUM (43744-131-15)",
"NDC11Code": "43744-0131-15",
"ProductNDC": "43744-131",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Carprofen",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110103",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "CARPROFEN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>67850-131-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (67850-131-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (67850-131-00) </PackageDescription>
<NDC11Code>67850-0131-10</NDC11Code>
<ProductNDC>67850-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin And Sulbactam For Injection</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201406</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; 1</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,2 Klebsiella spp.2 (including K. pneumoniae2), Proteus mirabilis,2 Bacteroides fragilis,2 Enterobacter spp.,2 and Acinetobacter calcoaceticus.2. NOTE: For information on use in pediatric patients see PRECAUTIONS – Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae2), Bacteroides spp. (including B. fragilis), and Enterobacter spp.2. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,2 and Bacteroides spp.2 (including B. fragilis2). __________. 2Efficacy for this microorganism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies, when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. 1.5 g of Ampicillin and Sulbactam for Injection, USP (1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt) parenteral contains approximately 115 mg (5 mEq) of sodium. 3 g of Ampicillin and Sulbactam for Injection, USP (2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt) parenteral contains approximately 230 mg (10 mEq) of sodium.</Description>
</NDC>
<NDC>
<NDCCode>67850-021-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (67850-021-10) / 1 g in 1 VIAL (67850-021-00) </PackageDescription>
<NDC11Code>67850-0021-10</NDC11Code>
<ProductNDC>67850-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>67850-022-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (67850-022-10) / 2 g in 1 VIAL (67850-022-00) </PackageDescription>
<NDC11Code>67850-0022-10</NDC11Code>
<ProductNDC>67850-022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/2g</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>67850-023-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (67850-023-10) / 250 mg in 1 VIAL (67850-023-00) </PackageDescription>
<NDC11Code>67850-0023-10</NDC11Code>
<ProductNDC>67850-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/250mg</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>67850-024-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (67850-024-10) / 500 mg in 1 VIAL (67850-024-00) </PackageDescription>
<NDC11Code>67850-0024-10</NDC11Code>
<ProductNDC>67850-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/500mg</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infectionscaused by S treptococcus pneumoniae, Staphylococcus aureus(penicillinase and nonpenicillinase-producing), H. influenzae,and Group A beta-hemolytic Streptococci. Bacterial Meningitiscaused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditiscaused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infectionscaused by sensitive strains of E. coliand P roteus mirabilis. Gastrointestinal Infectionscaused by Salmonella typhi(typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>67850-031-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (67850-031-10) / 1 g in 1 VIAL</PackageDescription>
<NDC11Code>67850-0031-10</NDC11Code>
<ProductNDC>67850-031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nafcillin</ProprietaryName>
<NonProprietaryName>Nafcillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190305</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090560</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>NAFCILLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Test Methods). Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to methicillin resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs. Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Nafcillin for Injection, USP is semisynthetic penicillin derived from the penicillin nucleus,6-amino-penicillanic acid. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1- azabicyclo [3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows. C 21H 21N 2NaO 5S ●H 2O MW=454.47. Nafcillin for Injection, USP for the intramuscular or intravenous route of administration, contains nafacilin sodium as a sterile white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. The pH of the reconstituted solution is 6 - 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial and is buffered with approximately 38 mg sodium citrate per gram. The sodium content is about 66 mg [2.9 mEq] per gram.</Description>
</NDC>
<NDC>
<NDCCode>67850-032-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (67850-032-10) / 2 g in 1 VIAL</PackageDescription>
<NDC11Code>67850-0032-10</NDC11Code>
<ProductNDC>67850-032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nafcillin</ProprietaryName>
<NonProprietaryName>Nafcillin Injection</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190305</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090560</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>NAFCILLIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/2g</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Test Methods). Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to methicillin resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs. Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Nafcillin for Injection, USP is semisynthetic penicillin derived from the penicillin nucleus,6-amino-penicillanic acid. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1- azabicyclo [3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows. C 21H 21N 2NaO 5S ●H 2O MW=454.47. Nafcillin for Injection, USP for the intramuscular or intravenous route of administration, contains nafacilin sodium as a sterile white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. The pH of the reconstituted solution is 6 - 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial and is buffered with approximately 38 mg sodium citrate per gram. The sodium content is about 66 mg [2.9 mEq] per gram.</Description>
</NDC>
<NDC>
<NDCCode>67850-041-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (67850-041-10) / 10 mL in 1 VIAL, SINGLE-USE (67850-041-00) </PackageDescription>
<NDC11Code>67850-0041-10</NDC11Code>
<ProductNDC>67850-041</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202436</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67850-042-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (67850-042-10) / 10 mL in 1 AMPULE (67850-042-00) </PackageDescription>
<NDC11Code>67850-0042-10</NDC11Code>
<ProductNDC>67850-042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190311</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202436</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tranexamic Acid Injection is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.</IndicationAndUsage>
<Description>Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid is a white crystalline powder. The structural formula is. Empirical Formula: C 8H 15NO 2Molecular Weight: 157.2. Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid and Water for Injection to 1 mL. The aqueous solution for injection has a pH of 6.5 to 8.0.</Description>
</NDC>
<NDC>
<NDCCode>67850-071-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (67850-071-10) / 2 mL in 1 VIAL, SINGLE-DOSE (67850-071-00) </PackageDescription>
<NDC11Code>67850-0071-10</NDC11Code>
<ProductNDC>67850-071</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215829</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil Hydrochloride Injection, USP is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong-Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.06. Molecular formula: C 27H 38N 2O 4∙ HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>67850-072-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (67850-072-10) / 4 mL in 1 VIAL, SINGLE-DOSE (67850-072-00) </PackageDescription>
<NDC11Code>67850-0072-10</NDC11Code>
<ProductNDC>67850-072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215829</ApplicationNumber>
<LabelerName>Methapharm Inc.</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil Hydrochloride Injection, USP is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong-Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.06. Molecular formula: C 27H 38N 2O 4∙ HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>67850-130-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (67850-130-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (67850-130-00) </PackageDescription>
<NDC11Code>67850-0130-10</NDC11Code>
<ProductNDC>67850-130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin And Sulbactam For Injection</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201406</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>1; .5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,2 Klebsiella spp.2 (including K. pneumoniae2), Proteus mirabilis,2 Bacteroides fragilis,2 Enterobacter spp.,2 and Acinetobacter calcoaceticus.2. NOTE: For information on use in pediatric patients see PRECAUTIONS – Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae2), Bacteroides spp. (including B. fragilis), and Enterobacter spp.2. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,2 and Bacteroides spp.2 (including B. fragilis2). __________. 2Efficacy for this microorganism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies, when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. 1.5 g of Ampicillin and Sulbactam for Injection, USP (1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt) parenteral contains approximately 115 mg (5 mEq) of sodium. 3 g of Ampicillin and Sulbactam for Injection, USP (2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt) parenteral contains approximately 230 mg (10 mEq) of sodium.</Description>
</NDC>
<NDC>
<NDCCode>67850-150-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (67850-150-10) / 10 mL in 1 VIAL, GLASS (67850-150-00) </PackageDescription>
<NDC11Code>67850-0150-10</NDC11Code>
<ProductNDC>67850-150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209524</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium for injection is a proton pump inhibitor (PPI) indicated in adults for the following: 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1), 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium for injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>67850-150-25</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (67850-150-25) / 10 mL in 1 VIAL, GLASS (67850-150-00) </PackageDescription>
<NDC11Code>67850-0150-25</NDC11Code>
<ProductNDC>67850-150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209524</ApplicationNumber>
<LabelerName>Methapharm, Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium for injection is a proton pump inhibitor (PPI) indicated in adults for the following: 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1), 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium for injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>10695-131-10</NDCCode>
<PackageDescription>1 kg in 1 CONTAINER (10695-131-10) </PackageDescription>
<NDC11Code>10695-0131-10</NDC11Code>
<ProductNDC>10695-131</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Naltrexone Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240528</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Willow Birch Pharma, LLC</LabelerName>
<SubstanceName>NALTREXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-19</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>28-MAY-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>10812-131-10</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (10812-131-10) > 50 mL in 1 TUBE</PackageDescription>
<NDC11Code>10812-0131-10</NDC11Code>
<ProductNDC>10812-131</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Neutrogena Men Triple Protect Face</ProprietaryName>
<ProprietaryNameSuffix>Spf20</ProprietaryNameSuffix>
<NonProprietaryName>Ensulizole, Octinoxate, And Oxybenzone</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20111201</StartMarketingDate>
<EndMarketingDate>20171101</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Johnson & Johnson Consumer Inc.</LabelerName>
<SubstanceName>ENSULIZOLE; OCTINOXATE; OXYBENZONE</SubstanceName>
<StrengthNumber>10; 60; 20</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-11-08</LastUpdate>
</NDC>
<NDC>
<NDCCode>11788-131-10</NDCCode>
<PackageDescription>1000 TABLET, COATED in 1 BOTTLE (11788-131-10) </PackageDescription>
<NDC11Code>11788-0131-10</NDC11Code>
<ProductNDC>11788-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin</ProprietaryName>
<NonProprietaryName>Rosuvastatin</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206513</ApplicationNumber>
<LabelerName>AiPing Pharmaceutical, Inc.</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to:.</IndicationAndUsage>
<Description>Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor.The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium is (C22H27FN3O6S)2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white amorphous powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets, USP for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, polacrilin potassium, magnesium stearate, hypromellose, titanium dioxide, triacetin, ferric oxide yellow, ferric oxide red, FD&C Yellow #6 aluminum lake, FD&C Blue #2/Indigo carmine aluminum lake, and FD&C Red #40/Allura red AC aluminum lake.FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>13533-131-01</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (13533-131-01) / .5 mL in 1 VIAL, SINGLE-DOSE (13533-131-00) </PackageDescription>
<NDC11Code>13533-0131-01</NDC11Code>
<ProductNDC>13533-131</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Tdvax</ProprietaryName>
<NonProprietaryName>Tetanus And Diphtheria Toxoids Adsorbed</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19700727</StartMarketingDate>
<EndMarketingDate>20250331</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101322</ApplicationNumber>
<LabelerName>Grifols USA, LLC</LabelerName>
<SubstanceName>CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>2; 2</StrengthNumber>
<StrengthUnit>[Lf]/.5mL; [Lf]/.5mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19700727</StartMarketingDatePackage>
<EndMarketingDatePackage>20250331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MassBiologics' TDVAX is a vaccine indicated for active immunization for the prevention of tetanus and diphtheria. This vaccine is approved for use in persons 7 years of age and older.</IndicationAndUsage>
<Description>TDVAX manufactured by MassBiologics is a sterile vaccine for intramuscular injection. After shaking, the vaccine appears as a homogeneous milky white suspension. Each 0.5 mL dose of MassBiologics' TDVAX is formulated to contain the following active ingredients: 2 Lf of tetanus toxoid and 2 Lf of diphtheria toxoid. Each 0.5 mL dose also contains aluminum adjuvant (not more than 0.53 mg aluminum by assay), < 100 mcg (0.02%) of residual formaldehyde, and a trace amount of thimerosal [mercury derivative, (≤ 0.3 mcg mercury/dose)] (not as a preservative) from the manufacturing process. The Corynebacterium diphtheriaeand Clostridium tetaniorganisms are grown on modified Mueller's media 1, 2which contains bovine extracts. The bovine material used in these extracts is sourced from countries which the United States Department of Agriculture has determined neither have nor present an undue risk for bovine spongiform encephalopathy. Tetanus and diphtheria toxins produced during growth of the cultures are detoxified with formaldehyde. The detoxified materials are then separately purified by ammonium sulfate fractionation. The diphtheria toxoid is further purified by column chromatography. The tetanus and diphtheria toxoids are individually adsorbed onto aluminum phosphate. The tetanus and diphtheria toxoids induce at least 2 units and 1 unit of antitoxin per mL of serum, respectively, in the guinea pig potency test.</Description>
</NDC>
<NDC>
<NDCCode>14096-131-02</NDCCode>
<PackageDescription>10 kg in 1 DRUM (14096-131-02) </PackageDescription>
<NDC11Code>14096-0131-02</NDC11Code>
<ProductNDC>14096-131</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20080101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Apicore US LLC</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-APR-16</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14789-131-05</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (14789-131-05) / 10 mL in 1 VIAL, GLASS (14789-131-07) </PackageDescription>
<NDC11Code>14789-0131-05</NDC11Code>
<ProductNDC>14789-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Water</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230925</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217536</ApplicationNumber>
<LabelerName>Nexus Pharmaceuticals Inc</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mL/10mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
<Description>This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. For intravenous. injection, add sufficient solute to make an approximately isotonic solution. Water for Injection, USP is chemically designated H2O. The glass vial is Type I or II borosilicate glass and meets the requirements of the powdered glass test according to the USP standards.</Description>
</NDC>
<NDC>
<NDCCode>17478-131-01</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (17478-131-01) > .5 mL in 1 VIAL, SINGLE-DOSE (17478-131-00)</PackageDescription>
<NDC11Code>17478-0131-01</NDC11Code>
<ProductNDC>17478-131</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Tetanus And Diphtheria Toxoids Adsorbed</ProprietaryName>
<NonProprietaryName>Tetanus And Diphtheria Toxoids Adsorbed</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20130215</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101322</ApplicationNumber>
<LabelerName>Akorn, Inc.</LabelerName>
<SubstanceName>CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>2; 2</StrengthNumber>
<StrengthUnit>[Lf]/.5mL; [Lf]/.5mL</StrengthUnit>
<Pharm_Classes>Inactivated Clostridium Tetani Vaccine [EPC],Actively Acquired Immunity [PE],Vaccines, Inactivated [Chemical/Ingredient],Tetanus Toxoid [Chemical/Ingredient],Inactivated Corynebacterium Diphtheriae Vaccine [EPC],Actively Acquired Immunity [PE],Vaccines, Inactivated [Chemical/Ingredient],Diphtheria Toxoid [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-03-20</LastUpdate>
</NDC>
<NDC>
<NDCCode>24765-131-01</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 CARTON (24765-131-01) / 800 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>24765-0131-01</NDC11Code>
<ProductNDC>24765-131</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Tm-c7 Oral Care</ProprietaryName>
<NonProprietaryName>Sodium Fluoride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210305</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part355</ApplicationNumber>
<LabelerName>Pharmacal-International Co., Ltd</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>.02</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-08-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>33261-131-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (33261-131-10)</PackageDescription>
<NDC11Code>33261-0131-10</NDC11Code>
<ProductNDC>33261-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040712</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC],Phenothiazines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Promethazine hydrochloride tablets, USP are useful for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of. anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.</IndicationAndUsage>
<Description>Each 12.5 mg promethazine hydrochloride tablet for oral administration contains 12.5 mg promethazine hydrochloride. Each 25 mg promethazine hydrochloride tablet for oral administration contains 25 mg promethazine hydrochloride. Each 50 mg promethazine hydrochloride tablet for oral administration contains 50 mg promethazine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, and methylcellulose. In addition, 50 mg tablet contains FD&C Red #40 and 12.5 mg tablet contains FD&C Yellow #6. Promethazine hydrochloride is a racemic compound; the empirical formula is. C17H20N2SHCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as. 10H-Phenothiazine-10-ethanamine, N,N,_-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water and soluble in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>33342-131-10</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (33342-131-10) </PackageDescription>
<NDC11Code>33342-0131-10</NDC11Code>
<ProductNDC>33342-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Candesartan Cilexetil And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Candesartan Cilexetil And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150307</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204100</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>CANDESARTAN CILEXETIL; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>16; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Candesartan cilexitil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with candesartan cilexitil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. This fixed dose combination is not indicated for initial therapy (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Candesartan cilexetil and hydrochlorothiazide tablets combines an angiotensin II receptor (type AT1) antagonist and a diuretic, hydrochlorothiazide. Candesartan cilexetil, USP a nonpeptide, is chemically described as (±)-1-Hydroxyethyl 2-ethoxy-1-[p-(o-1H-tetrazol-5- ylphenyl)benzyl]-7-benzimidazolecarboxylate, cyclohexyl carbonate (ester). Its empirical formula is C33H34N6O6, and its structural formula is. Candesartan cilexetil USP is a white to off-white powder with a molecular weight of 610.67. It is practically insoluble in water and sparingly soluble in methanol. Candesartan cilexetil USP is a racemic mixture containing one chiral center at the cyclohexyloxycarbonyloxy ethyl ester group. Following oral administration, candesartan cilexetil USP undergoes hydrolysis at the ester link to form the active drug, candesartan, which is achiral. Hydrochlorothiazide USP is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide USP is a white, or practically white, crystalline powder with a molecular weight of 297.72, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Candesartan cilexitil and hydrochlorothiazide tablets are available for oral administration in three tablet strengths of candesartan cilexetil USP and hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 16 mg/12.5 mg contain 16 mg of candesartan cilexetil USP and 12.5 mg of hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 32 mg/12.5 mg contain 32 mg of candesartan cilexetil USP and 12.5 mg of hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 32 mg/25 mg contain 32 mg of candesartan cilexetil USP and 25 mg of hydrochlorothiazide USP. The inactive ingredients of the tablets are carboxymethylcellulose calcium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, corn starch, glycerin, and ferric oxide (yellow). Ferric oxide (red) is also added to the 16 mg/12.5 mg and 32 mg/25 mg tablets as colorant. FDA approved organic impurities acceptance criteria differs from USP test.</Description>
</NDC>
<NDC>
<NDCCode>33342-131-12</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (33342-131-12) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>33342-0131-12</NDC11Code>
<ProductNDC>33342-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Candesartan Cilexetil And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Candesartan Cilexetil And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150307</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204100</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>CANDESARTAN CILEXETIL; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>16; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Candesartan cilexitil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with candesartan cilexitil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. This fixed dose combination is not indicated for initial therapy (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Candesartan cilexetil and hydrochlorothiazide tablets combines an angiotensin II receptor (type AT1) antagonist and a diuretic, hydrochlorothiazide. Candesartan cilexetil, USP a nonpeptide, is chemically described as (±)-1-Hydroxyethyl 2-ethoxy-1-[p-(o-1H-tetrazol-5- ylphenyl)benzyl]-7-benzimidazolecarboxylate, cyclohexyl carbonate (ester). Its empirical formula is C33H34N6O6, and its structural formula is. Candesartan cilexetil USP is a white to off-white powder with a molecular weight of 610.67. It is practically insoluble in water and sparingly soluble in methanol. Candesartan cilexetil USP is a racemic mixture containing one chiral center at the cyclohexyloxycarbonyloxy ethyl ester group. Following oral administration, candesartan cilexetil USP undergoes hydrolysis at the ester link to form the active drug, candesartan, which is achiral. Hydrochlorothiazide USP is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide USP is a white, or practically white, crystalline powder with a molecular weight of 297.72, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Candesartan cilexitil and hydrochlorothiazide tablets are available for oral administration in three tablet strengths of candesartan cilexetil USP and hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 16 mg/12.5 mg contain 16 mg of candesartan cilexetil USP and 12.5 mg of hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 32 mg/12.5 mg contain 32 mg of candesartan cilexetil USP and 12.5 mg of hydrochlorothiazide USP. Candesartan cilexetil and hydrochlorothiazide tablets 32 mg/25 mg contain 32 mg of candesartan cilexetil USP and 25 mg of hydrochlorothiazide USP. The inactive ingredients of the tablets are carboxymethylcellulose calcium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, corn starch, glycerin, and ferric oxide (yellow). Ferric oxide (red) is also added to the 16 mg/12.5 mg and 32 mg/25 mg tablets as colorant. FDA approved organic impurities acceptance criteria differs from USP test.</Description>
</NDC>
<NDC>
<NDCCode>42291-131-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (42291-131-10)</PackageDescription>
<NDC11Code>42291-0131-10</NDC11Code>
<ProductNDC>42291-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acarbose</ProprietaryName>
<NonProprietaryName>Acarbose</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091343</ApplicationNumber>
<LabelerName>AvKARE, Inc.</LabelerName>
<SubstanceName>ACARBOSE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>alpha Glucosidase Inhibitors [MoA],alpha-Glucosidase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-01-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>42571-131-29</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (42571-131-29) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>42571-0131-29</NDC11Code>
<ProductNDC>42571-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nevirapine</ProprietaryName>
<NonProprietaryName>Nevirapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203080</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>NEVIRAPINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 3A Inducers [MoA], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nevirapine tablet is indicated in combination with other antiretroviral agents for the treatment of human immunodeficiency virus (HIV-1) infection in adults and pediatric patients 15 days and older [see Clinical Studies (14.1, 14.2)] . Limitations of Use. Based on serious and life-threatening hepatotoxicity observed in controlled and uncontrolled trials, nevirapine tablet is not recommended to be initiated, unless the benefit outweighs the risk, in: 1 adult females with CD4 +cell counts greater than 250 cells/mm 3or , 2 adult males with CD4 +cell counts greater than 400 cells/mm 3[see Warnings and Precautions (5.1)] . .</IndicationAndUsage>
<Description>Nevirapine tablets USP, 200 mg is the brand name for nevirapine, a non-nucleoside reverse transcriptase inhibitor (NNRTI) with activity against Human Immunodeficiency Virus Type 1 (HIV-1). Nevirapine USP is structurally a member of the dipyridodiazepinone chemical class of compounds. The chemical name of nevirapine is 11-cyclopropyl-5, 11-dihydro-4-methyl-6H-dipyrido [3,2-b:2',3'-e][1,4] diazepin-6-one. Nevirapine USP is a white to off-white crystalline powder with the molecular weight of 266.30 and the molecular formula C 15H 14N 4O. Nevirapine has the following structural formula:. Nevirapine tablets USP, 200 mg is for oral administration. Each tablet contains 200 mg of nevirapine anhydrous and the inactive ingredients microcrystalline cellulose, lactose monohydrate, colloidal silicon dioxide, magnesium stearate, povidone, and Sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>42794-131-10</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (42794-131-10) </PackageDescription>
<NDC11Code>42794-0131-10</NDC11Code>
<ProductNDC>42794-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Liomny</ProprietaryName>
<NonProprietaryName>Liothyronine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200295</ApplicationNumber>
<LabelerName>SIGMAPHARM LABORATORIES, LLC</LabelerName>
<SubstanceName>LIOTHYRONINE SODIUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Triiodothyronine [CS], l-Triiodothyronine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIOMNY is an L-triiodothyronine (T3) indicated for: 1 Hypothyroidism: As replacement in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism ( 1.1) , 2 Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression: As an adjunct to surgery and radioiodine therapy in the management of well-differentiated thyroid cancer ( 1.2) , 3 Thyroid Suppression Test: As a diagnostic agent in suppression tests to differentiate suspected mild hyperthyroidism or thyroid gland autonomy ( 1.3) .</IndicationAndUsage>
<Description>LIOMNY contains the active ingredient, liothyronine (L-triiodothyronine or LT3), a synthetic form of a thyroid hormone liothyronine in sodium salt form. It is chemically designated as L-Tyrosine, O-(4-hydroxy-3-iodophenyl)-3,5-diiodo-, monosodium salt. The molecular formula, molecular weight and structural formula of liothyronine sodium are given below. LIOMNY contains liothyronine sodium equivalent to liothyronine in 5 mcg, 25 mcg, and 50 mcg. Inactive ingredients consist of calcium sulfate dihydrate, corn starch, gelatin, magnesium stearate and mannitol.</Description>
</NDC>
<NDC>
<NDCCode>43744-131-10</NDCCode>
<PackageDescription>1 g in 1 DRUM (43744-131-10)</PackageDescription>
<NDC11Code>43744-0131-10</NDC11Code>
<ProductNDC>43744-131</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Carprofen</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110103</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>CARPROFEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43744-131-15</NDCCode>
<PackageDescription>10 g in 1 DRUM (43744-131-15)</PackageDescription>
<NDC11Code>43744-0131-15</NDC11Code>
<ProductNDC>43744-131</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Carprofen</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110103</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>CARPROFEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
</NDCList>