RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>67877-476-58</NDCCode>
    <PackageDescription>28 BLISTER PACK in 1 CARTON (67877-476-58)  / 14 CAPSULE in 1 BLISTER PACK (67877-476-14) </PackageDescription>
    <NDC11Code>67877-0476-58</NDC11Code>
    <ProductNDC>67877-476</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fingolimod</ProprietaryName>
    <NonProprietaryName>Fingolimod Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220921</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208004</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220921</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
    <Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride is a white to practically white powder that is freely soluble in water and alcohol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride, equivalent to 0.5 mg of fingolimod. Each fingolimod capsule 0.5 mg is supplied as an imprinted hard-shell capsule containing the following inactive ingredients: dibasic calcium phosphate, magnesium stearate. The capsule shells contain gelatin, iron oxide yellow, and titanium dioxide. The imprinting ink contains propylene glycol, shellac and in addition, the black ink contains black iron oxide, and potassium hydroxide and yellow ink contains yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>43598-476-58</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (43598-476-58)  / 7 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>43598-0476-58</NDC11Code>
    <ProductNDC>43598-476</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Daptomycin</ProprietaryName>
    <NonProprietaryName>Daptomycin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20211004</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211403</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Inc.,</LabelerName>
    <SubstanceName>DAPTOMYCIN</SubstanceName>
    <StrengthNumber>350</StrengthNumber>
    <StrengthUnit>mg/7mL</StrengthUnit>
    <Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211004</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1-lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing approximately 350 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. The only inactive ingredient is sodium hydroxide, which is used for pH adjustment; between 4.0 to 5.0. Freshly reconstituted solutions of Daptomycin for Injection range in color from pale yellow to light brown.</Description>
  </NDC>
  <NDC>
    <NDCCode>74473-476-08</NDCCode>
    <PackageDescription>236.58 mL in 1 BOTTLE, SPRAY (74473-476-08) </PackageDescription>
    <NDC11Code>74473-0476-08</NDC11Code>
    <ProductNDC>74473-476</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Hand Sanitizer</ProprietaryName>
    <NonProprietaryName>Alcohol</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200330</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>Otis Products, Inc.</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>67877-476-30</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BOTTLE (67877-476-30) </PackageDescription>
    <NDC11Code>67877-0476-30</NDC11Code>
    <ProductNDC>67877-476</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fingolimod</ProprietaryName>
    <NonProprietaryName>Fingolimod Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220921</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208004</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220921</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
    <Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride is a white to practically white powder that is freely soluble in water and alcohol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride, equivalent to 0.5 mg of fingolimod. Each fingolimod capsule 0.5 mg is supplied as an imprinted hard-shell capsule containing the following inactive ingredients: dibasic calcium phosphate, magnesium stearate. The capsule shells contain gelatin, iron oxide yellow, and titanium dioxide. The imprinting ink contains propylene glycol, shellac and in addition, the black ink contains black iron oxide, and potassium hydroxide and yellow ink contains yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-476-32</NDCCode>
    <PackageDescription>7 BLISTER PACK in 1 CARTON (67877-476-32)  / 7 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>67877-0476-32</NDC11Code>
    <ProductNDC>67877-476</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fingolimod</ProprietaryName>
    <NonProprietaryName>Fingolimod Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220921</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208004</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220921</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
    <Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride is a white to practically white powder that is freely soluble in water and alcohol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride, equivalent to 0.5 mg of fingolimod. Each fingolimod capsule 0.5 mg is supplied as an imprinted hard-shell capsule containing the following inactive ingredients: dibasic calcium phosphate, magnesium stearate. The capsule shells contain gelatin, iron oxide yellow, and titanium dioxide. The imprinting ink contains propylene glycol, shellac and in addition, the black ink contains black iron oxide, and potassium hydroxide and yellow ink contains yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-476-33</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (67877-476-33)  / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>67877-0476-33</NDC11Code>
    <ProductNDC>67877-476</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fingolimod</ProprietaryName>
    <NonProprietaryName>Fingolimod Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220921</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208004</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220921</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
    <Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride is a white to practically white powder that is freely soluble in water and alcohol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride, equivalent to 0.5 mg of fingolimod. Each fingolimod capsule 0.5 mg is supplied as an imprinted hard-shell capsule containing the following inactive ingredients: dibasic calcium phosphate, magnesium stearate. The capsule shells contain gelatin, iron oxide yellow, and titanium dioxide. The imprinting ink contains propylene glycol, shellac and in addition, the black ink contains black iron oxide, and potassium hydroxide and yellow ink contains yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-476-56</NDCCode>
    <PackageDescription>28 CAPSULE in 1 BOTTLE (67877-476-56) </PackageDescription>
    <NDC11Code>67877-0476-56</NDC11Code>
    <ProductNDC>67877-476</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fingolimod</ProprietaryName>
    <NonProprietaryName>Fingolimod Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220921</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208004</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220921</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
    <Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride is a white to practically white powder that is freely soluble in water and alcohol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride, equivalent to 0.5 mg of fingolimod. Each fingolimod capsule 0.5 mg is supplied as an imprinted hard-shell capsule containing the following inactive ingredients: dibasic calcium phosphate, magnesium stearate. The capsule shells contain gelatin, iron oxide yellow, and titanium dioxide. The imprinting ink contains propylene glycol, shellac and in addition, the black ink contains black iron oxide, and potassium hydroxide and yellow ink contains yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-532-58</NDCCode>
    <PackageDescription>250 mL in 1 BOTTLE (67877-532-58) </PackageDescription>
    <NDC11Code>67877-0532-58</NDC11Code>
    <ProductNDC>67877-532</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxcarbazepine</ProprietaryName>
    <NonProprietaryName>Oxcarbazepine</NonProprietaryName>
    <DosageFormName>SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213183</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>OXCARBAZEPINE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxcarbazepine oral suspension is indicated for use as monotherapy or adjunctive therapy in the treatment of partial-onset seizures in adults and as monotherapy in the treatment of partial-onset seizures in pediatric patients aged 4 years and above, and as adjunctive therapy in pediatric patients aged 2 years and above with partial-onset seizures.</IndicationAndUsage>
    <Description>Oxcarbazepine oral suspension, USP  is an antiepileptic drug available as a 300 mg/5 mL (60 mg/mL) oral suspension. Oxcarbazepine is 10,11-Dihydro-10-oxo- 5H-dibenz[b,f]azepine-5-carboxamide, and its structural formula is: Oxcarbazepine, USP is light orange to creamish white or off-white powder. It is slightly soluble in chloroform, dichloromethane, acetone and methanol and practically insoluble in ethanol, ether and water. Its molecular weight is 252.27. Oxcarbazepine oral suspension, USP contains the following inactive ingredients: methyl paraben, propyl paraben, saccharin sodium dihydrate, polyoxyl stearate, malic acid, non-crystalline sorbitol, propylene glycol, microcrystalline cellulose, carboxy methyl cellulose sodium, hydroxyethyl cellulose, cherry flavour and purified water. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-750-58</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (67877-750-58)  *  7.5 g in 1 BOTTLE *  295 mL in 1 BOTTLE *  147 mL in 1 BOTTLE *  3.75 g in 1 BOTTLE</PackageDescription>
    <NDC11Code>67877-0750-58</NDC11Code>
    <ProductNDC>67877-750</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20230801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214913</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-08-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin hydrochloride for oral solution is indicated for the treatment of Clostridium difficile-associated diarrhea in adults and pediatric patients less than 18 years of age. Vancomycin hydrochloride for oral solution is also indicated for the treatment of enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) in adults and pediatric patients less than 18 years of age. Important Limitations of Use  Parenteral administration of vancomycin is not effective for the above infections; therefore, vancomycin must be given orally for these infections.  Orally administered vancomycin hydrochloride is not effective for treatment of other types of infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for oral solution and other antibacterial drugs, vancomycin hydrochloride for oral solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Vancomycin hydrochloride for oral solution, USP for oral administration contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis), which has the chemical formula C66H75Cl2N9O24HCl . The molecular weight of vancomycin hydrochloride is 1485.71 g/mol. Vancomycin hydrochloride has the structural formula. Each vancomycin hydrochloride for oral solution, USP kit contains a bottle of vancomycin hydrochloride USP, as white to almost white or tan to brown powder for oral solution, and a bottle of pre-measured Grape-Flavored Diluent, in the strengths and volumes listed in Table 3. Table 3: Vancomycin Strength, Diluent Volume and Vancomycin Concentration after Reconstitution. The Grape-Flavored Diluent used to reconstitute the oral solution contains: citric Acid (anhydrous), D&amp;C Yellow 10, FD &amp; C Red No 40, Grape Flavor 501417C, Methyl Paraben, Propylene Glycol, Propyl Paraben, Purified Water, Sucralose.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-751-58</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (67877-751-58)  *  145 mL in 1 BOTTLE *  15 g in 1 BOTTLE *  289 mL in 1 BOTTLE *  7.5 g in 1 BOTTLE</PackageDescription>
    <NDC11Code>67877-0751-58</NDC11Code>
    <ProductNDC>67877-751</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20230801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214913</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-08-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin hydrochloride for oral solution is indicated for the treatment of Clostridium difficile-associated diarrhea in adults and pediatric patients less than 18 years of age. Vancomycin hydrochloride for oral solution is also indicated for the treatment of enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) in adults and pediatric patients less than 18 years of age. Important Limitations of Use  Parenteral administration of vancomycin is not effective for the above infections; therefore, vancomycin must be given orally for these infections.  Orally administered vancomycin hydrochloride is not effective for treatment of other types of infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for oral solution and other antibacterial drugs, vancomycin hydrochloride for oral solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Vancomycin hydrochloride for oral solution, USP for oral administration contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis), which has the chemical formula C66H75Cl2N9O24HCl . The molecular weight of vancomycin hydrochloride is 1485.71 g/mol. Vancomycin hydrochloride has the structural formula. Each vancomycin hydrochloride for oral solution, USP kit contains a bottle of vancomycin hydrochloride USP, as white to almost white or tan to brown powder for oral solution, and a bottle of pre-measured Grape-Flavored Diluent, in the strengths and volumes listed in Table 3. Table 3: Vancomycin Strength, Diluent Volume and Vancomycin Concentration after Reconstitution. The Grape-Flavored Diluent used to reconstitute the oral solution contains: citric Acid (anhydrous), D&amp;C Yellow 10, FD &amp; C Red No 40, Grape Flavor 501417C, Methyl Paraben, Propylene Glycol, Propyl Paraben, Purified Water, Sucralose.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-756-58</NDCCode>
    <PackageDescription>300 TABLET, EXTENDED RELEASE in 1 BOTTLE (67877-756-58) </PackageDescription>
    <NDC11Code>67877-0756-58</NDC11Code>
    <ProductNDC>67877-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nifedipine</ProprietaryName>
    <NonProprietaryName>Nifedipine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220330</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216067</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>NIFEDIPINE</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221230</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>I. Vasospastic Angina. Nifedipine extended-release tablets are indicated for the management of vasospastic angina confirmed by any of the following criteria: 1) classical pattern of angina at rest accompanied by ST segment elevation, 2) angina or coronary artery spasm provoked by ergonovine, or 3) angiographically demonstrated coronary artery spasm. In those patients who have had angiography, the presence of significant fixed obstructive disease is not incompatible with the diagnosis of vasospastic angina, provided that the above criteria are satisfied. Nifedipine extended-release tablets may also be used where the clinical presentation suggests a possible vasospastic component, but where vasospasm has not been confirmed, e.g., where pain has a variable threshold on exertion, or in unstable angina where electrocardiographic findings are compatible with intermittent vasospasm, or when angina is refractory to nitrates and/or adequate doses of beta blockers. II. Chronic Stable Angina. (Classical Effort-Associated Angina). Nifedipine extended-release tablets are indicated for the management of chronic stable angina (effort-associated angina) without evidence of vasospasm in patients who remain symptomatic despite adequate doses of beta blockers and/or organic nitrates or who cannot tolerate those agents. In chronic stable angina (effort-associated angina), nifedipine has been effective in controlled trials of up to eight weeks duration in reducing angina frequency and increasing exercise tolerance, but confirmation of sustained effectiveness and evaluation of long-term safety in these patients is incomplete. Controlled studies in small numbers of patients suggest concomitant use of nifedipine and beta-blocking agents may be beneficial in patients with chronic stable angina, but available information is not sufficient to predict with confidence the effects of concurrent treatment, especially in patients with compromised left ventricular function or cardiac conduction abnormalities. When introducing such concomitant therapy, care must be taken to monitor blood pressure closely, since severe hypotension can occur from the combined effects of the drugs (see WARNINGS). III. Hypertension. Nifedipine extended-release tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including nifedipine extended-release tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Nifedipine extended-release tablets may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
    <Description>Nifedipine is a drug belonging to a class of pharmacological agents known as the calcium channel blockers. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-, dimethyl ester, C17 H18 N2O6, and has the structural formula:. Nifedipine is a yellow powder, freely soluble in acetone; practically insoluble in water. It has a molecular weight of 346.3. Nifedipine extended-release tablet is formulated as a once-a-day controlled-release tablet for oral administration to provide 30, 60, or 90 mg of nifedipine. Each tablet contains 33 mg nifedipine to provide a 30 mg dose. Each tablet contains 66 mg nifedipine to provide a 60 mg dose. Each tablet contains 99 mg nifedipine to provide a 90 mg dose. Inert ingredients in the formulations are: ammonium hydroxide; black iron oxide; cellulose acetate; hydroxypropyl cellulose; propylene glycol; hypromellose; magnesium stearate; polyethylene glycol; polyethylene oxide; butylated hydroxytoluene; red ferric oxide; shellac; sodium chloride; titanium dioxide.  FDA approved dissolution test specifications differ from USP. System Components and Performance. Nifedipine extended-release tablet is similar in appearance to a conventional tablet. It consists, however, of a semipermeable membrane surrounding an osmotically active drug core. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, releasing drug through the precision laser-drilled tablet orifice in the active layer.  Nifedipine extended-release tablets are designed to provide nifedipine at an approximately constant rate over 24 hours. This controlled rate of drug delivery into the gastrointestinal lumen is independent of pH or gastrointestinal motility. Nifedipine extended-release tablets depends for its action on the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the gastrointestinal tract. Drug delivery is essentially constant as long as the osmotic gradient remains constant, and then gradually falls to zero. Upon swallowing, the biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-757-58</NDCCode>
    <PackageDescription>300 TABLET, EXTENDED RELEASE in 1 BOTTLE (67877-757-58) </PackageDescription>
    <NDC11Code>67877-0757-58</NDC11Code>
    <ProductNDC>67877-757</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nifedipine</ProprietaryName>
    <NonProprietaryName>Nifedipine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220330</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216067</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>NIFEDIPINE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>I. Vasospastic Angina. Nifedipine extended-release tablets are indicated for the management of vasospastic angina confirmed by any of the following criteria: 1) classical pattern of angina at rest accompanied by ST segment elevation, 2) angina or coronary artery spasm provoked by ergonovine, or 3) angiographically demonstrated coronary artery spasm. In those patients who have had angiography, the presence of significant fixed obstructive disease is not incompatible with the diagnosis of vasospastic angina, provided that the above criteria are satisfied. Nifedipine extended-release tablets may also be used where the clinical presentation suggests a possible vasospastic component, but where vasospasm has not been confirmed, e.g., where pain has a variable threshold on exertion, or in unstable angina where electrocardiographic findings are compatible with intermittent vasospasm, or when angina is refractory to nitrates and/or adequate doses of beta blockers. II. Chronic Stable Angina. (Classical Effort-Associated Angina). Nifedipine extended-release tablets are indicated for the management of chronic stable angina (effort-associated angina) without evidence of vasospasm in patients who remain symptomatic despite adequate doses of beta blockers and/or organic nitrates or who cannot tolerate those agents. In chronic stable angina (effort-associated angina), nifedipine has been effective in controlled trials of up to eight weeks duration in reducing angina frequency and increasing exercise tolerance, but confirmation of sustained effectiveness and evaluation of long-term safety in these patients is incomplete. Controlled studies in small numbers of patients suggest concomitant use of nifedipine and beta-blocking agents may be beneficial in patients with chronic stable angina, but available information is not sufficient to predict with confidence the effects of concurrent treatment, especially in patients with compromised left ventricular function or cardiac conduction abnormalities. When introducing such concomitant therapy, care must be taken to monitor blood pressure closely, since severe hypotension can occur from the combined effects of the drugs (see WARNINGS). III. Hypertension. Nifedipine extended-release tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including nifedipine extended-release tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Nifedipine extended-release tablets may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
    <Description>Nifedipine is a drug belonging to a class of pharmacological agents known as the calcium channel blockers. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-, dimethyl ester, C17 H18 N2O6, and has the structural formula:. Nifedipine is a yellow powder, freely soluble in acetone; practically insoluble in water. It has a molecular weight of 346.3. Nifedipine extended-release tablet is formulated as a once-a-day controlled-release tablet for oral administration to provide 30, 60, or 90 mg of nifedipine. Each tablet contains 33 mg nifedipine to provide a 30 mg dose. Each tablet contains 66 mg nifedipine to provide a 60 mg dose. Each tablet contains 99 mg nifedipine to provide a 90 mg dose. Inert ingredients in the formulations are: ammonium hydroxide; black iron oxide; cellulose acetate; hydroxypropyl cellulose; propylene glycol; hypromellose; magnesium stearate; polyethylene glycol; polyethylene oxide; butylated hydroxytoluene; red ferric oxide; shellac; sodium chloride; titanium dioxide.  FDA approved dissolution test specifications differ from USP. System Components and Performance. Nifedipine extended-release tablet is similar in appearance to a conventional tablet. It consists, however, of a semipermeable membrane surrounding an osmotically active drug core. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, releasing drug through the precision laser-drilled tablet orifice in the active layer.  Nifedipine extended-release tablets are designed to provide nifedipine at an approximately constant rate over 24 hours. This controlled rate of drug delivery into the gastrointestinal lumen is independent of pH or gastrointestinal motility. Nifedipine extended-release tablets depends for its action on the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the gastrointestinal tract. Drug delivery is essentially constant as long as the osmotic gradient remains constant, and then gradually falls to zero. Upon swallowing, the biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-758-58</NDCCode>
    <PackageDescription>300 TABLET, EXTENDED RELEASE in 1 BOTTLE (67877-758-58) </PackageDescription>
    <NDC11Code>67877-0758-58</NDC11Code>
    <ProductNDC>67877-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nifedipine</ProprietaryName>
    <NonProprietaryName>Nifedipine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220330</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216067</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>NIFEDIPINE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>I. Vasospastic Angina. Nifedipine extended-release tablets are indicated for the management of vasospastic angina confirmed by any of the following criteria: 1) classical pattern of angina at rest accompanied by ST segment elevation, 2) angina or coronary artery spasm provoked by ergonovine, or 3) angiographically demonstrated coronary artery spasm. In those patients who have had angiography, the presence of significant fixed obstructive disease is not incompatible with the diagnosis of vasospastic angina, provided that the above criteria are satisfied. Nifedipine extended-release tablets may also be used where the clinical presentation suggests a possible vasospastic component, but where vasospasm has not been confirmed, e.g., where pain has a variable threshold on exertion, or in unstable angina where electrocardiographic findings are compatible with intermittent vasospasm, or when angina is refractory to nitrates and/or adequate doses of beta blockers. II. Chronic Stable Angina. (Classical Effort-Associated Angina). Nifedipine extended-release tablets are indicated for the management of chronic stable angina (effort-associated angina) without evidence of vasospasm in patients who remain symptomatic despite adequate doses of beta blockers and/or organic nitrates or who cannot tolerate those agents. In chronic stable angina (effort-associated angina), nifedipine has been effective in controlled trials of up to eight weeks duration in reducing angina frequency and increasing exercise tolerance, but confirmation of sustained effectiveness and evaluation of long-term safety in these patients is incomplete. Controlled studies in small numbers of patients suggest concomitant use of nifedipine and beta-blocking agents may be beneficial in patients with chronic stable angina, but available information is not sufficient to predict with confidence the effects of concurrent treatment, especially in patients with compromised left ventricular function or cardiac conduction abnormalities. When introducing such concomitant therapy, care must be taken to monitor blood pressure closely, since severe hypotension can occur from the combined effects of the drugs (see WARNINGS). III. Hypertension. Nifedipine extended-release tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including nifedipine extended-release tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Nifedipine extended-release tablets may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
    <Description>Nifedipine is a drug belonging to a class of pharmacological agents known as the calcium channel blockers. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-, dimethyl ester, C17 H18 N2O6, and has the structural formula:. Nifedipine is a yellow powder, freely soluble in acetone; practically insoluble in water. It has a molecular weight of 346.3. Nifedipine extended-release tablet is formulated as a once-a-day controlled-release tablet for oral administration to provide 30, 60, or 90 mg of nifedipine. Each tablet contains 33 mg nifedipine to provide a 30 mg dose. Each tablet contains 66 mg nifedipine to provide a 60 mg dose. Each tablet contains 99 mg nifedipine to provide a 90 mg dose. Inert ingredients in the formulations are: ammonium hydroxide; black iron oxide; cellulose acetate; hydroxypropyl cellulose; propylene glycol; hypromellose; magnesium stearate; polyethylene glycol; polyethylene oxide; butylated hydroxytoluene; red ferric oxide; shellac; sodium chloride; titanium dioxide.  FDA approved dissolution test specifications differ from USP. System Components and Performance. Nifedipine extended-release tablet is similar in appearance to a conventional tablet. It consists, however, of a semipermeable membrane surrounding an osmotically active drug core. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, releasing drug through the precision laser-drilled tablet orifice in the active layer.  Nifedipine extended-release tablets are designed to provide nifedipine at an approximately constant rate over 24 hours. This controlled rate of drug delivery into the gastrointestinal lumen is independent of pH or gastrointestinal motility. Nifedipine extended-release tablets depends for its action on the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the gastrointestinal tract. Drug delivery is essentially constant as long as the osmotic gradient remains constant, and then gradually falls to zero. Upon swallowing, the biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-772-58</NDCCode>
    <PackageDescription>9 PACKET in 1 CARTON (67877-772-58)  &gt; 1 POWDER, FOR SOLUTION in 1 PACKET (67877-772-49) </PackageDescription>
    <NDC11Code>67877-0772-58</NDC11Code>
    <ProductNDC>67877-772</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diclofenac Potassium</ProprietaryName>
    <NonProprietaryName>Diclofenac Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20221024</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216635</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>DICLOFENAC POTASSIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221024</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diclofenac potassium for oral solution is indicated for the acute treatment of migraine attacks with or without aura in adults (18 years of age or older). Limitations of Use: 1 Diclofenac potassium for oral solution is not indicated for the prophylactic therapy of migraine., 2 The safety and effectiveness of diclofenac potassium for oral solution have not been established for cluster headache, which is present in an older, predominantly male population.</IndicationAndUsage>
    <Description>Diclofenac potassium for oral solution, USP is a nonsteroidal anti-inflammatory drug, available as a buffered soluble powder, designed to be mixed with water prior to oral administration. Diclofenac potassium for oral solution, USP is a white to off-white, peppermint flavored powder for oral solution packaged in individual unit dose packets. The chemical name is 2-[(2,6-dichlorophenyl)amino] benzeneacetic acid monopotassium salt. The molecular weight is 334.25. Its molecular formula is C14H10Cl2NKO2, and it has the following structure. The inactive ingredients in diclofenac potassium for oral solution, USP include: Glyceryl behenate, mannitol, peppermint flavor, potassium bicarbonate, and sucralose.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-904-58</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (67877-904-58)  / 300 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>67877-0904-58</NDC11Code>
    <ProductNDC>67877-904</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Brivaracetam Oral Solution</ProprietaryName>
    <NonProprietaryName>Brivaracetam</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260223</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA219772</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>BRIVARACETAM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Epoxide Hydrolase Inhibitors [MoA]</Pharm_Classes>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-02-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Brivaracetam oral solution is indicated for the treatment of partial-onset seizures in patients 1 month of age and older.</IndicationAndUsage>
    <Description>The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyltetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a white or almost white powder. It is very soluble in water, buffer (pH 1.2, 4.5, and 7.4), ethanol, methanol, and glacial acetic acid. It is freely soluble in acetonitrile and acetone and soluble in toluene. It is very slightly soluble in n-hexane. Oral Solution. Brivaracetam oral solution contains 10 mg of brivaracetam per mL. The inactive ingredients are. carboxymethylcellulose sodium, citric acid anhydrous, glycerin, methylparaben, raspberry flavor, sodium citrate dihydrate, sorbitol solution, sucralose and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>45802-053-01</NDCCode>
    <PackageDescription>1 CAN in 1 CARTON (45802-053-01)  / 50 g in 1 CAN</PackageDescription>
    <NDC11Code>45802-0053-01</NDC11Code>
    <ProductNDC>45802-053</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Betamethasone Valerate</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20130115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078337</ApplicationNumber>
    <LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Betamethasone Valerate Foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Betamethasone Valerate Foam, 0.12% contains betamethasone valerate, USP, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9-fluoro11ß,17, 21-trihydroxy-16ß-methylpregna-1, 4-diene-3, 20-dione 17-valerate, with the empirical formula C27H37FO6, a molecular weight of 476.58. The following is the chemical structure. Betamethasone valerate is a white to practically white, odorless crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone Valerate Foam, 0.12% contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol (60%), polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>45802-053-02</NDCCode>
    <PackageDescription>1 CAN in 1 CARTON (45802-053-02)  / 100 g in 1 CAN</PackageDescription>
    <NDC11Code>45802-0053-02</NDC11Code>
    <ProductNDC>45802-053</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Betamethasone Valerate</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20130115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078337</ApplicationNumber>
    <LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Betamethasone Valerate Foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Betamethasone Valerate Foam, 0.12% contains betamethasone valerate, USP, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9-fluoro11ß,17, 21-trihydroxy-16ß-methylpregna-1, 4-diene-3, 20-dione 17-valerate, with the empirical formula C27H37FO6, a molecular weight of 476.58. The following is the chemical structure. Betamethasone valerate is a white to practically white, odorless crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone Valerate Foam, 0.12% contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol (60%), polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-708-31</NDCCode>
    <PackageDescription>1 CAN in 1 CARTON (46708-708-31)  / 100 g in 1 CAN</PackageDescription>
    <NDC11Code>46708-0708-31</NDC11Code>
    <ProductNDC>46708-708</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Betamethasone Valerate</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20240822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215832</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Betamethasone valerate foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Betamethasone valerate foam, 0.12% contains betamethasone valerate, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9α-fluoro-11ß,17,21-trihydroxy-16ß-methylpregna-1,4-diene-3,20-dione-17-valerate, with the empirical formula C27H37FO6, a molecular weight of 476.58. The following is the chemical structure. Betamethasone valerate. Betamethasone valerate, USP is a white to almost-white, crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone valerate foam, 0.12%, contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol (60.4%), polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-708-50</NDCCode>
    <PackageDescription>1 CAN in 1 CARTON (46708-708-50)  / 50 g in 1 CAN</PackageDescription>
    <NDC11Code>46708-0708-50</NDC11Code>
    <ProductNDC>46708-708</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Betamethasone Valerate</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20240822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215832</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Betamethasone valerate foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Betamethasone valerate foam, 0.12% contains betamethasone valerate, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9α-fluoro-11ß,17,21-trihydroxy-16ß-methylpregna-1,4-diene-3,20-dione-17-valerate, with the empirical formula C27H37FO6, a molecular weight of 476.58. The following is the chemical structure. Betamethasone valerate. Betamethasone valerate, USP is a white to almost-white, crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone valerate foam, 0.12%, contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol (60.4%), polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>51672-4188-3</NDCCode>
    <PackageDescription>1 CAN in 1 CARTON (51672-4188-3)  / 50 g in 1 CAN</PackageDescription>
    <NDC11Code>51672-4188-03</NDC11Code>
    <ProductNDC>51672-4188</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Betamethasone Valerate</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20170524</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208204</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170524</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Betamethasone valerate foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Betamethasone Valerate Foam, 0.12% contains betamethasone valerate, USP, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9-fluoro11β,17, 21-trihydroxy-16β-methylpregna-1, 4-diene-3, 20-dione 17-valerate, with the empirical formula C 27H 37FO 6, a molecular weight of 476.58. The following is the chemical structure:. Betamethasone valerate is a white to practically white, odorless crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone valerate foam, 0.12%, contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of alcohol (60.4%), cetyl alcohol, citric acid anhydrous, polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>51672-4188-7</NDCCode>
    <PackageDescription>1 CAN in 1 CARTON (51672-4188-7)  / 100 g in 1 CAN</PackageDescription>
    <NDC11Code>51672-4188-07</NDC11Code>
    <ProductNDC>51672-4188</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Betamethasone Valerate</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20170524</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208204</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170524</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Betamethasone valerate foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Betamethasone Valerate Foam, 0.12% contains betamethasone valerate, USP, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9-fluoro11β,17, 21-trihydroxy-16β-methylpregna-1, 4-diene-3, 20-dione 17-valerate, with the empirical formula C 27H 37FO 6, a molecular weight of 476.58. The following is the chemical structure:. Betamethasone valerate is a white to practically white, odorless crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone valerate foam, 0.12%, contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of alcohol (60.4%), cetyl alcohol, citric acid anhydrous, polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-5424-0</NDCCode>
    <PackageDescription>100 g in 1 CAN (54868-5424-0)</PackageDescription>
    <NDC11Code>54868-5424-00</NDC11Code>
    <ProductNDC>54868-5424</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Luxiq</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20050921</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020934</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Luxíq is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Luxíq Foam contains betamethasone valerate, USP, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9-fluoro11ß,17, 21-trihydroxy-16ß-methylpregna-1, 4-diene-3, 20-dione 17-valerate, with the empirical formula C27H37FO6, a molecular weight of 476.58.The following is the chemical structure. Betamethasone valerate is a white to practically white, odorless crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Luxíq® (betamethasone valerate) Foam, 0.12%, contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol (60.4%), polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-708-31</NDCCode>
    <PackageDescription>1 CAN in 1 CARTON (62332-708-31)  / 100 g in 1 CAN</PackageDescription>
    <NDC11Code>62332-0708-31</NDC11Code>
    <ProductNDC>62332-708</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Betamethasone Valerate</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20240822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215832</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Betamethasone valerate foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Betamethasone valerate foam, 0.12% contains betamethasone valerate, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9α-fluoro-11ß,17,21-trihydroxy-16ß-methylpregna-1,4-diene-3,20-dione-17-valerate, with the empirical formula C27H37FO6, a molecular weight of 476.58. The following is the chemical structure. Betamethasone valerate. Betamethasone valerate, USP is a white to almost-white, crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone valerate foam, 0.12%, contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol (60.4%), polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-708-50</NDCCode>
    <PackageDescription>1 CAN in 1 CARTON (62332-708-50)  / 50 g in 1 CAN</PackageDescription>
    <NDC11Code>62332-0708-50</NDC11Code>
    <ProductNDC>62332-708</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Betamethasone Valerate</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20240822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215832</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Betamethasone valerate foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Betamethasone valerate foam, 0.12% contains betamethasone valerate, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9α-fluoro-11ß,17,21-trihydroxy-16ß-methylpregna-1,4-diene-3,20-dione-17-valerate, with the empirical formula C27H37FO6, a molecular weight of 476.58. The following is the chemical structure. Betamethasone valerate. Betamethasone valerate, USP is a white to almost-white, crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone valerate foam, 0.12%, contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol (60.4%), polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-141-19</NDCCode>
    <PackageDescription>1 CANISTER in 1 CARTON (70700-141-19)  / 50 g in 1 CANISTER</PackageDescription>
    <NDC11Code>70700-0141-19</NDC11Code>
    <ProductNDC>70700-141</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Betamethasone Valerate</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate Foam</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20230510</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210639</ApplicationNumber>
    <LabelerName>Xiromed, LLC.</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230510</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Betamethasone valerate foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Betamethasone valerate foam, 0.12% contains betamethasone valerate, USP, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9-fluoro11ß,17, 21-trihydroxy-16ß-methylpregna-1, 4-diene-3, 20-dione 17-valerate, with the empirical formula C27H37FO6, a molecular weight of 476.58.The following is the chemical structure. Betamethasone valerate is a white to practically white, odorless crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone valerate foam, 0.12% contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid (anhydrous), ethanol (anhydrous) (60.4%), polysorbate 60, propylene glycol, purified water, stearyl alcohol, and tri-potassium citrate pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-141-20</NDCCode>
    <PackageDescription>1 CANISTER in 1 CARTON (70700-141-20)  / 100 g in 1 CANISTER</PackageDescription>
    <NDC11Code>70700-0141-20</NDC11Code>
    <ProductNDC>70700-141</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Betamethasone Valerate</ProprietaryName>
    <NonProprietaryName>Betamethasone Valerate Foam</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20230510</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210639</ApplicationNumber>
    <LabelerName>Xiromed, LLC.</LabelerName>
    <SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230510</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Betamethasone valerate foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.</IndicationAndUsage>
    <Description>Betamethasone valerate foam, 0.12% contains betamethasone valerate, USP, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9-fluoro11ß,17, 21-trihydroxy-16ß-methylpregna-1, 4-diene-3, 20-dione 17-valerate, with the empirical formula C27H37FO6, a molecular weight of 476.58.The following is the chemical structure. Betamethasone valerate is a white to practically white, odorless crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone valerate foam, 0.12% contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid (anhydrous), ethanol (anhydrous) (60.4%), polysorbate 60, propylene glycol, purified water, stearyl alcohol, and tri-potassium citrate pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-610-05</NDCCode>
    <PackageDescription>500 CAPSULE in 1 BOTTLE (67877-610-05) </PackageDescription>
    <NDC11Code>67877-0610-05</NDC11Code>
    <ProductNDC>67877-610</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tizanidne Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tizanidne Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212196</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tizanidine capsules are indicated for the treatment of spasticity in adults.</IndicationAndUsage>
    <Description>Tizanidine capsules contains tizanidine hydrochloride the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine hydrochloride is almost white to slightly yellow, crystalline powder. Tizanidine hydrochloride is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Tizanidine capsules are for oral administration and contain 2, 4, or 6 mg tizanidine (equivalent to 2.29 mg, 4.58 mg, and 6.87 mg tizanidine hydrochloride USP, respectively), and the inactive ingredients sugar spheres, hypromellose and silicon dioxide. Each capsule shell contains FD and C Blue1, FD and C Red 3 (4 mg and 6 mg), gelatin and titanium dioxide. The 2 mg and 6 mg capsule is printed with white pharmaceutical ink which contains shellac, propylene glycol, potassium hydroxide and titanium dioxide; 4 mg capsule is printed with black pharmaceutical ink which contains shellac, propylene glycol, black iron oxide and potassium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-610-15</NDCCode>
    <PackageDescription>150 CAPSULE in 1 BOTTLE (67877-610-15) </PackageDescription>
    <NDC11Code>67877-0610-15</NDC11Code>
    <ProductNDC>67877-610</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tizanidne Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tizanidne Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212196</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tizanidine capsules are indicated for the treatment of spasticity in adults.</IndicationAndUsage>
    <Description>Tizanidine capsules contains tizanidine hydrochloride the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine hydrochloride is almost white to slightly yellow, crystalline powder. Tizanidine hydrochloride is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Tizanidine capsules are for oral administration and contain 2, 4, or 6 mg tizanidine (equivalent to 2.29 mg, 4.58 mg, and 6.87 mg tizanidine hydrochloride USP, respectively), and the inactive ingredients sugar spheres, hypromellose and silicon dioxide. Each capsule shell contains FD and C Blue1, FD and C Red 3 (4 mg and 6 mg), gelatin and titanium dioxide. The 2 mg and 6 mg capsule is printed with white pharmaceutical ink which contains shellac, propylene glycol, potassium hydroxide and titanium dioxide; 4 mg capsule is printed with black pharmaceutical ink which contains shellac, propylene glycol, black iron oxide and potassium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-610-33</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (67877-610-33)  / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>67877-0610-33</NDC11Code>
    <ProductNDC>67877-610</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tizanidne Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tizanidne Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212196</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tizanidine capsules are indicated for the treatment of spasticity in adults.</IndicationAndUsage>
    <Description>Tizanidine capsules contains tizanidine hydrochloride the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine hydrochloride is almost white to slightly yellow, crystalline powder. Tizanidine hydrochloride is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Tizanidine capsules are for oral administration and contain 2, 4, or 6 mg tizanidine (equivalent to 2.29 mg, 4.58 mg, and 6.87 mg tizanidine hydrochloride USP, respectively), and the inactive ingredients sugar spheres, hypromellose and silicon dioxide. Each capsule shell contains FD and C Blue1, FD and C Red 3 (4 mg and 6 mg), gelatin and titanium dioxide. The 2 mg and 6 mg capsule is printed with white pharmaceutical ink which contains shellac, propylene glycol, potassium hydroxide and titanium dioxide; 4 mg capsule is printed with black pharmaceutical ink which contains shellac, propylene glycol, black iron oxide and potassium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-611-05</NDCCode>
    <PackageDescription>500 CAPSULE in 1 BOTTLE (67877-611-05) </PackageDescription>
    <NDC11Code>67877-0611-05</NDC11Code>
    <ProductNDC>67877-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tizanidne Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tizanidne Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212196</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tizanidine capsules are indicated for the treatment of spasticity in adults.</IndicationAndUsage>
    <Description>Tizanidine capsules contains tizanidine hydrochloride the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine hydrochloride is almost white to slightly yellow, crystalline powder. Tizanidine hydrochloride is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Tizanidine capsules are for oral administration and contain 2, 4, or 6 mg tizanidine (equivalent to 2.29 mg, 4.58 mg, and 6.87 mg tizanidine hydrochloride USP, respectively), and the inactive ingredients sugar spheres, hypromellose and silicon dioxide. Each capsule shell contains FD and C Blue1, FD and C Red 3 (4 mg and 6 mg), gelatin and titanium dioxide. The 2 mg and 6 mg capsule is printed with white pharmaceutical ink which contains shellac, propylene glycol, potassium hydroxide and titanium dioxide; 4 mg capsule is printed with black pharmaceutical ink which contains shellac, propylene glycol, black iron oxide and potassium hydroxide.</Description>
  </NDC>
</NDCList>