{
"NDC": [
{
"NDCCode": "68001-354-31",
"PackageDescription": "10 VIAL in 1 CARTON (68001-354-31) > 20 mL in 1 VIAL (68001-354-29) ",
"NDC11Code": "68001-0354-31",
"ProductNDC": "68001-354",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20180430",
"EndMarketingDate": "20220831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208973",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180430",
"EndMarketingDatePackage": "20220831",
"SamplePackage": "N"
},
{
"NDCCode": "68001-266-31",
"PackageDescription": "10 VIAL in 1 CARTON (68001-266-31) > 20 mL in 1 VIAL (68001-266-29)",
"NDC11Code": "68001-0266-31",
"ProductNDC": "68001-266",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluorouracil",
"NonProprietaryName": "Fluorouracil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20141215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040743",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "FLUOROURACIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-02-02",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": "Fluorouracil is indicated for the treatment of patients with.",
"Description": "Fluorouracil injection, USP a nucleoside metabolic inhibitor, is a colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 10 mL and 20 mL, a sterile preparation that contains single dose vial for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. Molecular formula: C4H3FN2O2 Molecular weight: 130.08 g/mole."
},
{
"NDCCode": "68001-323-31",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (68001-323-31) > 20 mL in 1 VIAL, GLASS (68001-323-29) ",
"NDC11Code": "68001-0323-31",
"ProductNDC": "68001-323",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meropenem",
"NonProprietaryName": "Meropenem",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205883",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "MEROPENEM",
"StrengthNumber": "500",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20170430",
"SamplePackage": "N",
"IndicationAndUsage": "Meropenem for injection (I.V.) is a penem antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) , 2 Complicated intra-abdominal infections (adult and pediatric patients). (1.2) , 3 Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) .",
"Description": "Meropenem for injection, USP (I.V.) is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6- [(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is. Meropenem, USP is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem, USP is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 1 gram meropenem for injection, USP (I.V.) vial will deliver 1 gram of meropenem, USP and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg meropenem for injection, USP (I.V.) vial will deliver 500 mg meropenem, USP and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration (2.4)]."
},
{
"NDCCode": "68001-408-31",
"PackageDescription": "10 VIAL in 1 CARTON (68001-408-31) / 20 mL in 1 VIAL (68001-408-29) ",
"NDC11Code": "68001-0408-31",
"ProductNDC": "68001-408",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ertapenem",
"NonProprietaryName": "Ertapenem Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207647",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "ERTAPENEM SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190829",
"SamplePackage": "N",
"IndicationAndUsage": "Ertapenem for injection is a penem antibacterial indicated in adult patients and pediatric patients (3 months of age and older) for the treatment of the following moderate to severe infections caused by susceptible bacteria: 1 Complicated intra-abdominal infections. ( 1.1) , 2 Complicated skin and skin structure infections, including diabetic foot infections without osteomyelitis. ( 1.2) , 3 Community-acquired pneumonia. ( 1.3) , 4 Complicated urinary tract infections including pyelonephritis. ( 1.4) , 5 Acute pelvic infections including postpartum endomyometritis, septic abortion and post-surgical gynecologic infections. ( 1.5) .",
"Description": "Ertapenem for injection is a sterile, synthetic, parenteral, 1-β methyl-carbapenem that is structurally related to beta-lactam antibiotics. Chemically, Ertapenem for injection is described as [4R-[3(3S*,5S*),4α,5β,6β(R*)]]-3-[[5-[[(3‑carboxyphenyl)amino]carbonyl]-3-pyrrolidinyl]thio]-6-(1-hydroxyethyl)-4-methyl-7-oxo-1‑ azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monosodium salt. Its molecular weight is 497.50. The empirical formula is C 22H 24N 3O 7SNa, and its structural formula is:. Ertapenem sodium is a white to off-white hygroscopic, weakly crystalline powder. It is soluble in water and 0.9% sodium chloride solution, practically insoluble in ethanol, and insoluble in isopropyl acetate and tetrahydrofuran. Ertapenem for injection is supplied as sterile lyophilized powder for intravenous infusion after reconstitution with appropriate diluent [see Dosage and Administration (2.7)] and transfer to 50 mL 0.9% Sodium Chloride Injection or for intramuscular injection following reconstitution with 1% lidocaine hydrochloride. Each single-dose vial contains 1gram ertapenem equivalent to 1.046 grams ertapenem sodium. The sodium content is approximately 137 mg (approximately 6.0 mEq). Each vial of Ertapenem for injection contains the following inactive ingredients: 175 mg sodium bicarbonate and sodium hydroxide to adjust pH to 7.5."
},
{
"NDCCode": "68001-446-31",
"PackageDescription": "10 VIAL in 1 CARTON (68001-446-31) > 20 mL in 1 VIAL (68001-446-29) ",
"NDC11Code": "68001-0446-31",
"ProductNDC": "68001-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meropenem",
"NonProprietaryName": "Meropenem",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206086",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "MEROPENEM",
"StrengthNumber": "500",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200831",
"SamplePackage": "N",
"IndicationAndUsage": "Meropenem for injection is a penem antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). ( 1.1) , 2 Complicated intra-abdominal infections (adult and pediatric patients). ( 1.2) , 3 Bacterial meningitis (pediatric patients 3 months of age and older only). ( 1.3) .",
"Description": "Meropenem for injection is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxilic acid trihydrate. Its empirical formula is C 17H 25N 3O 5S∙3H 2O with a molecular weight of 437.52. Its structural formula is:. Meropenem for injection is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 1 gram meropenem for injection vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg meropenem for injection vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration (2.4)] ."
},
{
"NDCCode": "68001-508-31",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (68001-508-31) / 20 mL in 1 VIAL, SINGLE-DOSE (68001-508-29) ",
"NDC11Code": "68001-0508-31",
"ProductNDC": "68001-508",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210811",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204959",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "4; .5",
"StrengthUnit": "g/20mL; g/20mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210811",
"SamplePackage": "N",
"IndicationAndUsage": "Piperacillin and Tazobactam for Injection, USP is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older ( 1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older ( 1.2) , 3 Skin and skin structure infections in adults ( 1.3) , 4 Female pelvic infections in adults ( 1.4) , 5 Community-acquired pneumonia in adults ( 1.5) .",
"Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination products consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S,5 R,6 R)-6-[( R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2- phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C 23H 26N 5NaO 7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S,3 S,5 R)-3-methyl-7-oxo-3-(1 H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10H 11N 4NaO 5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na +) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. : 1 Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium., 2 Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium., 3 Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium."
},
{
"NDCCode": "68001-524-31",
"PackageDescription": "10 VIAL in 1 CARTON (68001-524-31) / 20 mL in 1 VIAL (68001-524-29) ",
"NDC11Code": "68001-0524-31",
"ProductNDC": "68001-524",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluorouracil",
"NonProprietaryName": "Fluorouracil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210123",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "FLUOROURACIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220218",
"SamplePackage": "N",
"Description": "Fluorouracil injection USP, a nucleoside metabolic inhibitor, is a colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 10 mL and 20 mL, a sterile preparation that contains single dose vial for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is: Molecular formula: C 4H 3FN 2O 2 Molecular weight : 130.08 g/mole."
},
{
"NDCCode": "23155-355-41",
"PackageDescription": "1 KIT in 1 CARTON (23155-355-41) * 10 mL in 1 VIAL (23155-353-31) * 10 mL in 1 VIAL (23155-354-31) ",
"NDC11Code": "23155-0355-41",
"ProductNDC": "23155-355",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Melphalan Hydrochloride",
"NonProprietaryName": "Melphalan Hydrochloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20250328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206523",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"Status": "Active",
"LastUpdate": "2026-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250328",
"SamplePackage": "N",
"IndicationAndUsage": "Melphalan Hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.",
"Description": "Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin.Melphalan is practically insoluble in water and has a pKa1 of ~2.5. Melphalan Hydrochloride for Injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone. Melphalan Hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6.0 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL.Melphalan Hydrochloride for Injection is administered intravenously."
},
{
"NDCCode": "55315-354-31",
"PackageDescription": "1 BOTTLE in 1 CARTON (55315-354-31) > 120 mL in 1 BOTTLE",
"NDC11Code": "55315-0354-31",
"ProductNDC": "55315-354",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Childrens Allergy Relief",
"NonProprietaryName": "Cetirizine Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20150131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090750",
"LabelerName": "Fred's, Inc.",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150131",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat."
},
{
"NDCCode": "55315-356-31",
"PackageDescription": "354 mL in 1 BOTTLE (55315-356-31) ",
"NDC11Code": "55315-0356-31",
"ProductNDC": "55315-356",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Diphenhydramine Hydrochloride",
"NonProprietaryName": "Diphenhydramine Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20150131",
"EndMarketingDate": "20220501",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part338",
"LabelerName": "Fred's, Inc.",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/30mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150131",
"EndMarketingDatePackage": "20220501",
"SamplePackage": "N"
},
{
"NDCCode": "55315-359-31",
"PackageDescription": "354 mL in 1 BOTTLE (55315-359-31) ",
"NDC11Code": "55315-0359-31",
"ProductNDC": "55315-359",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Daytime Relief Severe Cold And Flu",
"NonProprietaryName": "Acetaminophen, Phenylephrine Hcl, Dextromethorphan Hbr And Guaifenesin",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20150626",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Fred's, Inc.",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 10; 200; 5",
"StrengthUnit": "mg/15mL; mg/15mL; mg/15mL; mg/15mL",
"Status": "Deprecated",
"LastUpdate": "2020-12-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20150626",
"SamplePackage": "N"
},
{
"NDCCode": "55315-365-31",
"PackageDescription": "354 mL in 1 BOTTLE (55315-365-31) ",
"NDC11Code": "55315-0365-31",
"ProductNDC": "55315-365",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nighttime Relief Severe Cold And Flu",
"NonProprietaryName": "Acetaminophen, Doxylamine Succinate, Phenylephrine Hcl And Dextromethorphan Hbr",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20150626",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Fred's, Inc.",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "650; 20; 12.5; 10",
"StrengthUnit": "mg/30mL; mg/30mL; mg/30mL; mg/30mL",
"Status": "Deprecated",
"LastUpdate": "2020-12-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20150626",
"SamplePackage": "N"
},
{
"NDCCode": "58602-024-31",
"PackageDescription": "2 BOTTLE in 1 CARTON (58602-024-31) > 354 mL in 1 BOTTLE (58602-024-16) ",
"NDC11Code": "58602-0024-31",
"ProductNDC": "58602-024",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aurozzil Nighttime Sleep-aid",
"NonProprietaryName": "Diphenhydramine Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20150515",
"EndMarketingDate": "20220501",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part338",
"LabelerName": "Aurohealth LLC",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/30mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150515",
"EndMarketingDatePackage": "20220501",
"SamplePackage": "N"
},
{
"NDCCode": "69842-104-31",
"PackageDescription": "354 mL in 1 BOTTLE, SPRAY (69842-104-31) ",
"NDC11Code": "69842-0104-31",
"ProductNDC": "69842-104",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cvs Health",
"ProprietaryNameSuffix": "Sport Spf 30 Clear",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151023",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "CVS Pharmacy",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "30; 100; 50; 20; 40",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-10-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20151023",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "69842-110-31",
"PackageDescription": "354 mL in 1 BOTTLE, SPRAY (69842-110-31) ",
"NDC11Code": "69842-0110-31",
"ProductNDC": "69842-110",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cvs Health",
"ProprietaryNameSuffix": "Spf 50 Clear",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170428",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "CVS Pharmacy",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "30; 100; 50; 40; 50",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-10-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170428",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "68001-004-00",
"PackageDescription": "100 TABLET in 1 BOTTLE (68001-004-00) ",
"NDC11Code": "68001-0004-00",
"ProductNDC": "68001-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metaxalone",
"NonProprietaryName": "Metaxalone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140422",
"EndMarketingDate": "20230731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203399",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "METAXALONE",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20140422",
"EndMarketingDatePackage": "20230731",
"SamplePackage": "N"
},
{
"NDCCode": "68001-113-06",
"PackageDescription": "60 TABLET, EXTENDED RELEASE in 1 BOTTLE (68001-113-06) ",
"NDC11Code": "68001-0113-06",
"ProductNDC": "68001-113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091399",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140213",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam extended-release tablet is indicated for the treatment of partial-onset seizures in patients 12 years of age and older ( 1).",
"Description": "Levetiracetam extended-release tablet USP is an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam extended-release tablets USP contain the labeled amount of levetiracetam. Inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate anhydrous, hydrogenated vegetable oil, hypromellose, lactose anhydrous, magnesium stearate, polyvinyl alcohol, polyethylene glycol, talc and titanium dioxide. The imprinting ink contains shellac, iron oxide black and propylene glycol. The medication is combined with a drug release controlling agent that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass."
},
{
"NDCCode": "68001-114-06",
"PackageDescription": "60 TABLET, EXTENDED RELEASE in 1 BOTTLE (68001-114-06) ",
"NDC11Code": "68001-0114-06",
"ProductNDC": "68001-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091399",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140213",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam extended-release tablet is indicated for the treatment of partial-onset seizures in patients 12 years of age and older ( 1).",
"Description": "Levetiracetam extended-release tablet USP is an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam extended-release tablets USP contain the labeled amount of levetiracetam. Inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate anhydrous, hydrogenated vegetable oil, hypromellose, lactose anhydrous, magnesium stearate, polyvinyl alcohol, polyethylene glycol, talc and titanium dioxide. The imprinting ink contains shellac, iron oxide black and propylene glycol. The medication is combined with a drug release controlling agent that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass."
},
{
"NDCCode": "68001-406-73",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68001-406-73) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, GLASS",
"NDC11Code": "68001-0406-73",
"ProductNDC": "68001-406",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204125",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2022-10-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190823",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infection.",
"Description": "Vancomycin Hydrochloride for Injection, USP is a white, almost white, or tan lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the 10 g Pharmacy Bulk Package bottle, a clear solution is achieved with the pH of the solution is between 2.5 and 4.5. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m] [10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24∙HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). AFTER RECONSTITUTION, FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "68001-407-75",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68001-407-75) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, GLASS",
"NDC11Code": "68001-0407-75",
"ProductNDC": "68001-407",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204125",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2022-10-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190823",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infection.",
"Description": "Vancomycin Hydrochloride for Injection, USP is a white, almost white, or tan lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the 10 g Pharmacy Bulk Package bottle, a clear solution is achieved with the pH of the solution is between 2.5 and 4.5. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m] [10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24∙HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). AFTER RECONSTITUTION, FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "68001-451-05",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (68001-451-05) ",
"NDC11Code": "68001-0451-05",
"ProductNDC": "68001-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ziprasidone Hydrochloride",
"NonProprietaryName": "Ziprasidone Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204117",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "ZIPRASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200831",
"SamplePackage": "N"
},
{
"NDCCode": "68001-465-62",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (68001-465-62) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (68001-465-61) ",
"NDC11Code": "68001-0465-62",
"ProductNDC": "68001-465",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204107",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20201130",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomem-branous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, mono-hydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "68001-466-64",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (68001-466-64) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (68001-466-63) ",
"NDC11Code": "68001-0466-64",
"ProductNDC": "68001-466",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204107",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20201130",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomem-branous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, mono-hydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "68001-500-08",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68001-500-08) ",
"NDC11Code": "68001-0500-08",
"ProductNDC": "68001-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate Er Tablets",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211143",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-08-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210514",
"SamplePackage": "N"
},
{
"NDCCode": "68001-501-08",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68001-501-08) ",
"NDC11Code": "68001-0501-08",
"ProductNDC": "68001-501",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate Er Tablets",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211143",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-08-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210514",
"SamplePackage": "N"
},
{
"NDCCode": "68001-502-08",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68001-502-08) ",
"NDC11Code": "68001-0502-08",
"ProductNDC": "68001-502",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate Er Tablets",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211143",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-08-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210514",
"SamplePackage": "N"
},
{
"NDCCode": "68001-517-36",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (68001-517-36) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "68001-0517-36",
"ProductNDC": "68001-517",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fosaprepitant",
"NonProprietaryName": "Fosaprepitant",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210823",
"EndMarketingDate": "20240731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212309",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "FOSAPREPITANT DIMEGLUMINE",
"StrengthNumber": "150",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210823",
"EndMarketingDatePackage": "20240731",
"SamplePackage": "N",
"IndicationAndUsage": "Fosaprepitant for injection, in combination with other antiemetic agents, is indicated in adults and pediatric patients 6 months of age and older for the prevention of: : 1 acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin. , 2 delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). .",
"Description": "Fosaprepitant for injection is a sterile, lyophilized formulation containing fosaprepitant dimeglumine, a prodrug of aprepitant, a substance P/neurokinin-1 (NK 1) receptor antagonist, an antiemetic agent, chemically described as 1-Deoxy-1-(methylamino)-D-glucitol [3-[[(2 R,3S)-2-(1 R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl] methyl]-2,5-dihydro-5-oxo-1 H-1,2,4-triazol-1-yl] phosphonate (2:1). Its empirical formula is C 23H 22F 7N 4O 6P·2(C 7H 17NO 5) and its structural formula is:. Fosaprepitant dimeglumine is a white or whitish hygroscopic powder with a molecular weight of 1004.83. It is freely soluble in water and methanol, practically insoluble in absolute ethanol. Each vial of fosaprepitant for injection for administration as an intravenous infusion contains 150 mg of fosaprepitant (equivalent to 245.3 mg of fosaprepitant dimeglumine) and the following inactive ingredients: edetate disodium (5.4 mg), polysorbate 80 (75 mg), lactose anhydrous (375 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment)."
},
{
"NDCCode": "68001-620-54",
"PackageDescription": "1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 CARTON (68001-620-54) ",
"NDC11Code": "68001-0620-54",
"ProductNDC": "68001-620",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azacitidine",
"NonProprietaryName": "Azacitidine",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20250110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201537",
"LabelerName": "BluePoint Laboratories.",
"SubstanceName": "AZACITIDINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250110",
"SamplePackage": "N",
"IndicationAndUsage": "Azacitidine for injection is a nucleoside metabolic inhibitor indicated for the treatment of: 1 Adult patients with the following FAB myelodysplastic syndrome (MDS) subtypes: Refractory anemia (RA) or refractory anemia with ringed sideroblasts (RARS) (if accompanied by neutropenia or thrombocytopenia or requiring transfusions), refractory anemia with excess blasts (RAEB), refractory anemia with excess blasts in transformation (RAEB-T), and chronic myelomonocytic leukemia (CMMoL). ( 1.1).",
"Description": "Azacitidine for injection contains azacitidine, which is a nucleoside metabolic inhibitor. Azacitidine is 4-amino-1-β-D-ribofuranosyl-1,3,5-triazin-2(1H)-one. The structural formula is as follows. The empirical formula is C 8H 12N 4O 5. The molecular weight is 244.20. Azacitidine is a white to off- white powder. Azacitidine was found to be soluble in dimethyl sulphoxide, sparingly soluble in water and insoluble in acetone and ethanol. The finished product is supplied in a sterile form for reconstitution as a suspension for subcutaneous injection or reconstitution as a solution with further dilution for intravenous infusion. Vials of azacitidine for injection contain 100 mg of azacitidine and 100 mg mannitol as a sterile lyophilized powder."
},
{
"NDCCode": "68001-666-01",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (68001-666-01) / 1 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "68001-0666-01",
"ProductNDC": "68001-666",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aprepitant",
"NonProprietaryName": "Aprepitant",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207777",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "APREPITANT",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260129",
"SamplePackage": "N",
"IndicationAndUsage": "Aprepitant is a substance P/neurokinin 1 (NK 1) receptor antagonist. Aprepitant capsules are indicated: 1 in combination with other antiemetic agents, in patients 12 years of age and older for prevention of: acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin ( 1.1) nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC) ( 1.1) , 2 for prevention of postoperative nausea and vomiting (PONV) in adults ( 1.2) .",
"Description": "Aprepitant Capsules USP contain the active ingredient aprepitant, USP. Aprepitant, USP is a substance P/neurokinin 1 (NK 1) receptor antagonist, an antiemetic agent, chemically described as 5-[[(2 R,3 S)-2-[(1 R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-1,2-dihydro-3 H-1,2,4-triazol-3-one. Its empirical formula is C 23H 21F 7N 4O 3, and its structural formula is:. Aprepitant, USP is a white to off-white powder, with a molecular weight of 534.43 g/mol. It is soluble in methanol and in acetone, sparingly soluble in ethanol, and practically insoluble in water. Each capsule for oral administration contains either 40 mg, 80 mg, or 125 mg of aprepitant, USP and the following inactive ingredients: colloidal silicon dioxide, hydroxyethyl cellulose, microcrystalline cellulose, mannitol, poloxamer, povidone, sodium stearyl fumarate, vitamin E polyethylene glycol succinate, and purified water. The capsule shell excipients are gelatin, sodium lauryl sulphate and titanium dioxide. The 40 mg capsule shell also contains iron oxide yellow, and the 125 mg capsule also contains FD&C Red #3. Non-volatile solvents in the imprinting ink are shellac, iron oxide black and potassium hydroxide. USP dissolution test pending."
},
{
"NDCCode": "68001-666-17",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (68001-666-17) / 1 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "68001-0666-17",
"ProductNDC": "68001-666",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aprepitant",
"NonProprietaryName": "Aprepitant",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207777",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "APREPITANT",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260202",
"SamplePackage": "N",
"IndicationAndUsage": "Aprepitant is a substance P/neurokinin 1 (NK 1) receptor antagonist. Aprepitant capsules are indicated: 1 in combination with other antiemetic agents, in patients 12 years of age and older for prevention of: acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin ( 1.1) nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC) ( 1.1) , 2 for prevention of postoperative nausea and vomiting (PONV) in adults ( 1.2) .",
"Description": "Aprepitant Capsules USP contain the active ingredient aprepitant, USP. Aprepitant, USP is a substance P/neurokinin 1 (NK 1) receptor antagonist, an antiemetic agent, chemically described as 5-[[(2 R,3 S)-2-[(1 R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-1,2-dihydro-3 H-1,2,4-triazol-3-one. Its empirical formula is C 23H 21F 7N 4O 3, and its structural formula is:. Aprepitant, USP is a white to off-white powder, with a molecular weight of 534.43 g/mol. It is soluble in methanol and in acetone, sparingly soluble in ethanol, and practically insoluble in water. Each capsule for oral administration contains either 40 mg, 80 mg, or 125 mg of aprepitant, USP and the following inactive ingredients: colloidal silicon dioxide, hydroxyethyl cellulose, microcrystalline cellulose, mannitol, poloxamer, povidone, sodium stearyl fumarate, vitamin E polyethylene glycol succinate, and purified water. The capsule shell excipients are gelatin, sodium lauryl sulphate and titanium dioxide. The 40 mg capsule shell also contains iron oxide yellow, and the 125 mg capsule also contains FD&C Red #3. Non-volatile solvents in the imprinting ink are shellac, iron oxide black and potassium hydroxide. USP dissolution test pending."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68001-354-31</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68001-354-31) > 20 mL in 1 VIAL (68001-354-29) </PackageDescription>
<NDC11Code>68001-0354-31</NDC11Code>
<ProductNDC>68001-354</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20180430</StartMarketingDate>
<EndMarketingDate>20220831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208973</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180430</StartMarketingDatePackage>
<EndMarketingDatePackage>20220831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68001-266-31</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68001-266-31) > 20 mL in 1 VIAL (68001-266-29)</PackageDescription>
<NDC11Code>68001-0266-31</NDC11Code>
<ProductNDC>68001-266</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluorouracil</ProprietaryName>
<NonProprietaryName>Fluorouracil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20141215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040743</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>FLUOROURACIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-02</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Fluorouracil is indicated for the treatment of patients with.</IndicationAndUsage>
<Description>Fluorouracil injection, USP a nucleoside metabolic inhibitor, is a colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 10 mL and 20 mL, a sterile preparation that contains single dose vial for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. Molecular formula: C4H3FN2O2 Molecular weight: 130.08 g/mole.</Description>
</NDC>
<NDC>
<NDCCode>68001-323-31</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (68001-323-31) > 20 mL in 1 VIAL, GLASS (68001-323-29) </PackageDescription>
<NDC11Code>68001-0323-31</NDC11Code>
<ProductNDC>68001-323</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meropenem</ProprietaryName>
<NonProprietaryName>Meropenem</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205883</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>MEROPENEM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meropenem for injection (I.V.) is a penem antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) , 2 Complicated intra-abdominal infections (adult and pediatric patients). (1.2) , 3 Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) .</IndicationAndUsage>
<Description>Meropenem for injection, USP (I.V.) is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6- [(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is. Meropenem, USP is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem, USP is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 1 gram meropenem for injection, USP (I.V.) vial will deliver 1 gram of meropenem, USP and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg meropenem for injection, USP (I.V.) vial will deliver 500 mg meropenem, USP and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration (2.4)].</Description>
</NDC>
<NDC>
<NDCCode>68001-408-31</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68001-408-31) / 20 mL in 1 VIAL (68001-408-29) </PackageDescription>
<NDC11Code>68001-0408-31</NDC11Code>
<ProductNDC>68001-408</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ertapenem</ProprietaryName>
<NonProprietaryName>Ertapenem Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207647</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>ERTAPENEM SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ertapenem for injection is a penem antibacterial indicated in adult patients and pediatric patients (3 months of age and older) for the treatment of the following moderate to severe infections caused by susceptible bacteria: 1 Complicated intra-abdominal infections. ( 1.1) , 2 Complicated skin and skin structure infections, including diabetic foot infections without osteomyelitis. ( 1.2) , 3 Community-acquired pneumonia. ( 1.3) , 4 Complicated urinary tract infections including pyelonephritis. ( 1.4) , 5 Acute pelvic infections including postpartum endomyometritis, septic abortion and post-surgical gynecologic infections. ( 1.5) .</IndicationAndUsage>
<Description>Ertapenem for injection is a sterile, synthetic, parenteral, 1-β methyl-carbapenem that is structurally related to beta-lactam antibiotics. Chemically, Ertapenem for injection is described as [4R-[3(3S*,5S*),4α,5β,6β(R*)]]-3-[[5-[[(3‑carboxyphenyl)amino]carbonyl]-3-pyrrolidinyl]thio]-6-(1-hydroxyethyl)-4-methyl-7-oxo-1‑ azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monosodium salt. Its molecular weight is 497.50. The empirical formula is C 22H 24N 3O 7SNa, and its structural formula is:. Ertapenem sodium is a white to off-white hygroscopic, weakly crystalline powder. It is soluble in water and 0.9% sodium chloride solution, practically insoluble in ethanol, and insoluble in isopropyl acetate and tetrahydrofuran. Ertapenem for injection is supplied as sterile lyophilized powder for intravenous infusion after reconstitution with appropriate diluent [see Dosage and Administration (2.7)] and transfer to 50 mL 0.9% Sodium Chloride Injection or for intramuscular injection following reconstitution with 1% lidocaine hydrochloride. Each single-dose vial contains 1gram ertapenem equivalent to 1.046 grams ertapenem sodium. The sodium content is approximately 137 mg (approximately 6.0 mEq). Each vial of Ertapenem for injection contains the following inactive ingredients: 175 mg sodium bicarbonate and sodium hydroxide to adjust pH to 7.5.</Description>
</NDC>
<NDC>
<NDCCode>68001-446-31</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68001-446-31) > 20 mL in 1 VIAL (68001-446-29) </PackageDescription>
<NDC11Code>68001-0446-31</NDC11Code>
<ProductNDC>68001-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meropenem</ProprietaryName>
<NonProprietaryName>Meropenem</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206086</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>MEROPENEM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meropenem for injection is a penem antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). ( 1.1) , 2 Complicated intra-abdominal infections (adult and pediatric patients). ( 1.2) , 3 Bacterial meningitis (pediatric patients 3 months of age and older only). ( 1.3) .</IndicationAndUsage>
<Description>Meropenem for injection is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxilic acid trihydrate. Its empirical formula is C 17H 25N 3O 5S∙3H 2O with a molecular weight of 437.52. Its structural formula is:. Meropenem for injection is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 1 gram meropenem for injection vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg meropenem for injection vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration (2.4)] .</Description>
</NDC>
<NDC>
<NDCCode>68001-508-31</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (68001-508-31) / 20 mL in 1 VIAL, SINGLE-DOSE (68001-508-29) </PackageDescription>
<NDC11Code>68001-0508-31</NDC11Code>
<ProductNDC>68001-508</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210811</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204959</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>4; .5</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210811</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Piperacillin and Tazobactam for Injection, USP is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older ( 1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older ( 1.2) , 3 Skin and skin structure infections in adults ( 1.3) , 4 Female pelvic infections in adults ( 1.4) , 5 Community-acquired pneumonia in adults ( 1.5) .</IndicationAndUsage>
<Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination products consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S,5 R,6 R)-6-[( R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2- phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C 23H 26N 5NaO 7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S,3 S,5 R)-3-methyl-7-oxo-3-(1 H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10H 11N 4NaO 5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na +) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. : 1 Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium., 2 Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium., 3 Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium.</Description>
</NDC>
<NDC>
<NDCCode>68001-524-31</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68001-524-31) / 20 mL in 1 VIAL (68001-524-29) </PackageDescription>
<NDC11Code>68001-0524-31</NDC11Code>
<ProductNDC>68001-524</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluorouracil</ProprietaryName>
<NonProprietaryName>Fluorouracil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210123</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>FLUOROURACIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Fluorouracil injection USP, a nucleoside metabolic inhibitor, is a colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 10 mL and 20 mL, a sterile preparation that contains single dose vial for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is: Molecular formula: C 4H 3FN 2O 2 Molecular weight : 130.08 g/mole.</Description>
</NDC>
<NDC>
<NDCCode>23155-355-41</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (23155-355-41) * 10 mL in 1 VIAL (23155-353-31) * 10 mL in 1 VIAL (23155-354-31) </PackageDescription>
<NDC11Code>23155-0355-41</NDC11Code>
<ProductNDC>23155-355</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Melphalan Hydrochloride</ProprietaryName>
<NonProprietaryName>Melphalan Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20250328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206523</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Melphalan Hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.</IndicationAndUsage>
<Description>Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin.Melphalan is practically insoluble in water and has a pKa1 of ~2.5. Melphalan Hydrochloride for Injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone. Melphalan Hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6.0 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL.Melphalan Hydrochloride for Injection is administered intravenously.</Description>
</NDC>
<NDC>
<NDCCode>55315-354-31</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (55315-354-31) > 120 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>55315-0354-31</NDC11Code>
<ProductNDC>55315-354</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Childrens Allergy Relief</ProprietaryName>
<NonProprietaryName>Cetirizine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090750</ApplicationNumber>
<LabelerName>Fred's, Inc.</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55315-356-31</NDCCode>
<PackageDescription>354 mL in 1 BOTTLE (55315-356-31) </PackageDescription>
<NDC11Code>55315-0356-31</NDC11Code>
<ProductNDC>55315-356</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Diphenhydramine Hydrochloride</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150131</StartMarketingDate>
<EndMarketingDate>20220501</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part338</ApplicationNumber>
<LabelerName>Fred's, Inc.</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/30mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150131</StartMarketingDatePackage>
<EndMarketingDatePackage>20220501</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55315-359-31</NDCCode>
<PackageDescription>354 mL in 1 BOTTLE (55315-359-31) </PackageDescription>
<NDC11Code>55315-0359-31</NDC11Code>
<ProductNDC>55315-359</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Daytime Relief Severe Cold And Flu</ProprietaryName>
<NonProprietaryName>Acetaminophen, Phenylephrine Hcl, Dextromethorphan Hbr And Guaifenesin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150626</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Fred's, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 10; 200; 5</StrengthNumber>
<StrengthUnit>mg/15mL; mg/15mL; mg/15mL; mg/15mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55315-365-31</NDCCode>
<PackageDescription>354 mL in 1 BOTTLE (55315-365-31) </PackageDescription>
<NDC11Code>55315-0365-31</NDC11Code>
<ProductNDC>55315-365</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nighttime Relief Severe Cold And Flu</ProprietaryName>
<NonProprietaryName>Acetaminophen, Doxylamine Succinate, Phenylephrine Hcl And Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150626</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Fred's, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>650; 20; 12.5; 10</StrengthNumber>
<StrengthUnit>mg/30mL; mg/30mL; mg/30mL; mg/30mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58602-024-31</NDCCode>
<PackageDescription>2 BOTTLE in 1 CARTON (58602-024-31) > 354 mL in 1 BOTTLE (58602-024-16) </PackageDescription>
<NDC11Code>58602-0024-31</NDC11Code>
<ProductNDC>58602-024</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aurozzil Nighttime Sleep-aid</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150515</StartMarketingDate>
<EndMarketingDate>20220501</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part338</ApplicationNumber>
<LabelerName>Aurohealth LLC</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/30mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150515</StartMarketingDatePackage>
<EndMarketingDatePackage>20220501</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69842-104-31</NDCCode>
<PackageDescription>354 mL in 1 BOTTLE, SPRAY (69842-104-31) </PackageDescription>
<NDC11Code>69842-0104-31</NDC11Code>
<ProductNDC>69842-104</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cvs Health</ProprietaryName>
<ProprietaryNameSuffix>Sport Spf 30 Clear</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151023</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>CVS Pharmacy</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>30; 100; 50; 20; 40</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69842-110-31</NDCCode>
<PackageDescription>354 mL in 1 BOTTLE, SPRAY (69842-110-31) </PackageDescription>
<NDC11Code>69842-0110-31</NDC11Code>
<ProductNDC>69842-110</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cvs Health</ProprietaryName>
<ProprietaryNameSuffix>Spf 50 Clear</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170428</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>CVS Pharmacy</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>30; 100; 50; 40; 50</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170428</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68001-004-00</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (68001-004-00) </PackageDescription>
<NDC11Code>68001-0004-00</NDC11Code>
<ProductNDC>68001-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metaxalone</ProprietaryName>
<NonProprietaryName>Metaxalone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140422</StartMarketingDate>
<EndMarketingDate>20230731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203399</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>METAXALONE</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20140422</StartMarketingDatePackage>
<EndMarketingDatePackage>20230731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68001-113-06</NDCCode>
<PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (68001-113-06) </PackageDescription>
<NDC11Code>68001-0113-06</NDC11Code>
<ProductNDC>68001-113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091399</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam extended-release tablet is indicated for the treatment of partial-onset seizures in patients 12 years of age and older ( 1).</IndicationAndUsage>
<Description>Levetiracetam extended-release tablet USP is an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam extended-release tablets USP contain the labeled amount of levetiracetam. Inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate anhydrous, hydrogenated vegetable oil, hypromellose, lactose anhydrous, magnesium stearate, polyvinyl alcohol, polyethylene glycol, talc and titanium dioxide. The imprinting ink contains shellac, iron oxide black and propylene glycol. The medication is combined with a drug release controlling agent that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass.</Description>
</NDC>
<NDC>
<NDCCode>68001-114-06</NDCCode>
<PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (68001-114-06) </PackageDescription>
<NDC11Code>68001-0114-06</NDC11Code>
<ProductNDC>68001-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091399</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam extended-release tablet is indicated for the treatment of partial-onset seizures in patients 12 years of age and older ( 1).</IndicationAndUsage>
<Description>Levetiracetam extended-release tablet USP is an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam extended-release tablets USP contain the labeled amount of levetiracetam. Inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate anhydrous, hydrogenated vegetable oil, hypromellose, lactose anhydrous, magnesium stearate, polyvinyl alcohol, polyethylene glycol, talc and titanium dioxide. The imprinting ink contains shellac, iron oxide black and propylene glycol. The medication is combined with a drug release controlling agent that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass.</Description>
</NDC>
<NDC>
<NDCCode>68001-406-73</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68001-406-73) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>68001-0406-73</NDC11Code>
<ProductNDC>68001-406</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204125</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infection.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP is a white, almost white, or tan lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the 10 g Pharmacy Bulk Package bottle, a clear solution is achieved with the pH of the solution is between 2.5 and 4.5. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m] [10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24∙HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). AFTER RECONSTITUTION, FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>68001-407-75</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68001-407-75) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>68001-0407-75</NDC11Code>
<ProductNDC>68001-407</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204125</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infection.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP is a white, almost white, or tan lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the 10 g Pharmacy Bulk Package bottle, a clear solution is achieved with the pH of the solution is between 2.5 and 4.5. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m] [10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24∙HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). AFTER RECONSTITUTION, FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>68001-451-05</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (68001-451-05) </PackageDescription>
<NDC11Code>68001-0451-05</NDC11Code>
<ProductNDC>68001-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ziprasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Ziprasidone Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204117</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>ZIPRASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68001-465-62</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (68001-465-62) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (68001-465-61) </PackageDescription>
<NDC11Code>68001-0465-62</NDC11Code>
<ProductNDC>68001-465</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204107</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomem-branous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, mono-hydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>68001-466-64</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (68001-466-64) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (68001-466-63) </PackageDescription>
<NDC11Code>68001-0466-64</NDC11Code>
<ProductNDC>68001-466</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204107</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomem-branous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, mono-hydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>68001-500-08</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68001-500-08) </PackageDescription>
<NDC11Code>68001-0500-08</NDC11Code>
<ProductNDC>68001-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate Er Tablets</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211143</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-08-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68001-501-08</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68001-501-08) </PackageDescription>
<NDC11Code>68001-0501-08</NDC11Code>
<ProductNDC>68001-501</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate Er Tablets</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211143</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-08-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68001-502-08</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68001-502-08) </PackageDescription>
<NDC11Code>68001-0502-08</NDC11Code>
<ProductNDC>68001-502</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate Er Tablets</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211143</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-08-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68001-517-36</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (68001-517-36) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>68001-0517-36</NDC11Code>
<ProductNDC>68001-517</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fosaprepitant</ProprietaryName>
<NonProprietaryName>Fosaprepitant</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210823</StartMarketingDate>
<EndMarketingDate>20240731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212309</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>FOSAPREPITANT DIMEGLUMINE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210823</StartMarketingDatePackage>
<EndMarketingDatePackage>20240731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fosaprepitant for injection, in combination with other antiemetic agents, is indicated in adults and pediatric patients 6 months of age and older for the prevention of: : 1 acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin. , 2 delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). .</IndicationAndUsage>
<Description>Fosaprepitant for injection is a sterile, lyophilized formulation containing fosaprepitant dimeglumine, a prodrug of aprepitant, a substance P/neurokinin-1 (NK 1) receptor antagonist, an antiemetic agent, chemically described as 1-Deoxy-1-(methylamino)-D-glucitol [3-[[(2 R,3S)-2-(1 R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl] methyl]-2,5-dihydro-5-oxo-1 H-1,2,4-triazol-1-yl] phosphonate (2:1). Its empirical formula is C 23H 22F 7N 4O 6P·2(C 7H 17NO 5) and its structural formula is:. Fosaprepitant dimeglumine is a white or whitish hygroscopic powder with a molecular weight of 1004.83. It is freely soluble in water and methanol, practically insoluble in absolute ethanol. Each vial of fosaprepitant for injection for administration as an intravenous infusion contains 150 mg of fosaprepitant (equivalent to 245.3 mg of fosaprepitant dimeglumine) and the following inactive ingredients: edetate disodium (5.4 mg), polysorbate 80 (75 mg), lactose anhydrous (375 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment).</Description>
</NDC>
<NDC>
<NDCCode>68001-620-54</NDCCode>
<PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 CARTON (68001-620-54) </PackageDescription>
<NDC11Code>68001-0620-54</NDC11Code>
<ProductNDC>68001-620</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azacitidine</ProprietaryName>
<NonProprietaryName>Azacitidine</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201537</ApplicationNumber>
<LabelerName>BluePoint Laboratories.</LabelerName>
<SubstanceName>AZACITIDINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azacitidine for injection is a nucleoside metabolic inhibitor indicated for the treatment of: 1 Adult patients with the following FAB myelodysplastic syndrome (MDS) subtypes: Refractory anemia (RA) or refractory anemia with ringed sideroblasts (RARS) (if accompanied by neutropenia or thrombocytopenia or requiring transfusions), refractory anemia with excess blasts (RAEB), refractory anemia with excess blasts in transformation (RAEB-T), and chronic myelomonocytic leukemia (CMMoL). ( 1.1).</IndicationAndUsage>
<Description>Azacitidine for injection contains azacitidine, which is a nucleoside metabolic inhibitor. Azacitidine is 4-amino-1-β-D-ribofuranosyl-1,3,5-triazin-2(1H)-one. The structural formula is as follows. The empirical formula is C 8H 12N 4O 5. The molecular weight is 244.20. Azacitidine is a white to off- white powder. Azacitidine was found to be soluble in dimethyl sulphoxide, sparingly soluble in water and insoluble in acetone and ethanol. The finished product is supplied in a sterile form for reconstitution as a suspension for subcutaneous injection or reconstitution as a solution with further dilution for intravenous infusion. Vials of azacitidine for injection contain 100 mg of azacitidine and 100 mg mannitol as a sterile lyophilized powder.</Description>
</NDC>
<NDC>
<NDCCode>68001-666-01</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (68001-666-01) / 1 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68001-0666-01</NDC11Code>
<ProductNDC>68001-666</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aprepitant</ProprietaryName>
<NonProprietaryName>Aprepitant</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207777</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>APREPITANT</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aprepitant is a substance P/neurokinin 1 (NK 1) receptor antagonist. Aprepitant capsules are indicated: 1 in combination with other antiemetic agents, in patients 12 years of age and older for prevention of: acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin ( 1.1) nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC) ( 1.1) , 2 for prevention of postoperative nausea and vomiting (PONV) in adults ( 1.2) .</IndicationAndUsage>
<Description>Aprepitant Capsules USP contain the active ingredient aprepitant, USP. Aprepitant, USP is a substance P/neurokinin 1 (NK 1) receptor antagonist, an antiemetic agent, chemically described as 5-[[(2 R,3 S)-2-[(1 R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-1,2-dihydro-3 H-1,2,4-triazol-3-one. Its empirical formula is C 23H 21F 7N 4O 3, and its structural formula is:. Aprepitant, USP is a white to off-white powder, with a molecular weight of 534.43 g/mol. It is soluble in methanol and in acetone, sparingly soluble in ethanol, and practically insoluble in water. Each capsule for oral administration contains either 40 mg, 80 mg, or 125 mg of aprepitant, USP and the following inactive ingredients: colloidal silicon dioxide, hydroxyethyl cellulose, microcrystalline cellulose, mannitol, poloxamer, povidone, sodium stearyl fumarate, vitamin E polyethylene glycol succinate, and purified water. The capsule shell excipients are gelatin, sodium lauryl sulphate and titanium dioxide. The 40 mg capsule shell also contains iron oxide yellow, and the 125 mg capsule also contains FD&C Red #3. Non-volatile solvents in the imprinting ink are shellac, iron oxide black and potassium hydroxide. USP dissolution test pending.</Description>
</NDC>
<NDC>
<NDCCode>68001-666-17</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (68001-666-17) / 1 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68001-0666-17</NDC11Code>
<ProductNDC>68001-666</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aprepitant</ProprietaryName>
<NonProprietaryName>Aprepitant</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207777</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>APREPITANT</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aprepitant is a substance P/neurokinin 1 (NK 1) receptor antagonist. Aprepitant capsules are indicated: 1 in combination with other antiemetic agents, in patients 12 years of age and older for prevention of: acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin ( 1.1) nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC) ( 1.1) , 2 for prevention of postoperative nausea and vomiting (PONV) in adults ( 1.2) .</IndicationAndUsage>
<Description>Aprepitant Capsules USP contain the active ingredient aprepitant, USP. Aprepitant, USP is a substance P/neurokinin 1 (NK 1) receptor antagonist, an antiemetic agent, chemically described as 5-[[(2 R,3 S)-2-[(1 R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-1,2-dihydro-3 H-1,2,4-triazol-3-one. Its empirical formula is C 23H 21F 7N 4O 3, and its structural formula is:. Aprepitant, USP is a white to off-white powder, with a molecular weight of 534.43 g/mol. It is soluble in methanol and in acetone, sparingly soluble in ethanol, and practically insoluble in water. Each capsule for oral administration contains either 40 mg, 80 mg, or 125 mg of aprepitant, USP and the following inactive ingredients: colloidal silicon dioxide, hydroxyethyl cellulose, microcrystalline cellulose, mannitol, poloxamer, povidone, sodium stearyl fumarate, vitamin E polyethylene glycol succinate, and purified water. The capsule shell excipients are gelatin, sodium lauryl sulphate and titanium dioxide. The 40 mg capsule shell also contains iron oxide yellow, and the 125 mg capsule also contains FD&C Red #3. Non-volatile solvents in the imprinting ink are shellac, iron oxide black and potassium hydroxide. USP dissolution test pending.</Description>
</NDC>
</NDCList>