{
"NDC": [
{
"NDCCode": "68083-312-06",
"PackageDescription": "6 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (68083-312-06) > 30 mL in 1 VIAL, PHARMACY BULK PACKAGE (68083-312-01) ",
"NDC11Code": "68083-0312-06",
"ProductNDC": "68083-312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210518",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211189",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "TOBRAMYCIN SULFATE",
"StrengthNumber": "1.2",
"StrengthUnit": "g/30mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2022-10-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210518",
"SamplePackage": "N",
"IndicationAndUsage": "Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiella sp. Lower respiratory tract infections caused by P. aeruginosa, Klebsiella sp, Enterobacter sp, Serratia sp, E. coli, and S. aureus (penicillinase and non-penicillinase-producing strains). Serious central-nervous-system infections (meningitis) caused by susceptible organisms. Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella sp, and Enterobacter sp. Skin, bone, and skin structure infections caused by P. aeruginosa, Proteus sp, E. coli, Klebsiella sp, Enterobacter sp, and S. aureusComplicated and recurrent urinary tract infections caused by P. aeruginosa, Proteus sp, (indole-positive and indole- negative), E. coli, Klebsiella sp, Enterobacter sp, Serratia sp, S. aureus, Providencia sp, and Citrobacter sp. Aminoglycosides, including tobramycin sulphate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram- negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulphate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGS box above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Sterile tobramycin sulfate is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C18H37N5O9)2 5H2SO4. The molecular weight is 1,425.39. The structural formula for tobramycin is as follows. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for proper use of Pharmacy Bulk Package)."
},
{
"NDCCode": "68083-233-06",
"PackageDescription": "6 VIAL, SINGLE-DOSE in 1 CARTON (68083-233-06) / 50 mL in 1 VIAL, SINGLE-DOSE (68083-233-01) ",
"NDC11Code": "68083-0233-06",
"ProductNDC": "68083-233",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nelarabine",
"NonProprietaryName": "Nelarabine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212605",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "NELARABINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240103",
"SamplePackage": "N",
"IndicationAndUsage": "Nelarabine is indicated for the treatment of T-cell acute lymphoblastic leukemia (T-ALL) and T-cell lymphoblastic lymphoma (T-LBL) in adult and pediatric patients age 1 year and older whose disease has not responded to or has relapsed following treatment with at least 2 chemotherapy regimens.",
"Description": "Nelarabine is a prodrug of the cytotoxic deoxyguanosine analogue, 9-β-D-arabinofuranosylguanine (ara-G).The chemical name for nelarabine is 2-amino-9-β-D-arabinofuranosyl-6-methoxy-9H-purine. It has the molecular formula C11H15N5O5 and a molecular weight of 297.27. Nelarabine has the following structural formula. Nelarabine is slightly soluble to soluble in water and melts with decomposition between 209°C and 217°C.Nelarabine injection is supplied as a clear, colorless, sterile solution in glass single-dose vials. Each vial contains 250 mg of nelarabine (5 mg nelarabine per mL) and the inactive ingredient sodium chloride (4.5 mg per mL) in Water for Injection, USP. Nelarabine is intended for intravenous infusion. Hydrochloric acid and sodium hydroxide may have been used to adjust the pH. The solution pH ranges from 5.0 to 7.0."
},
{
"NDCCode": "43419-312-06",
"PackageDescription": "14 g in 1 CONTAINER (43419-312-06)",
"NDC11Code": "43419-0312-06",
"ProductNDC": "43419-312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Iope Retigen Moisture Twin Cake No.23",
"NonProprietaryName": "Octinoxate, Titanium Dioxide, And Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110801",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "AMOREPACIFIC",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": ".84; .868; .4116",
"StrengthUnit": "g/14g; g/14g; g/14g",
"Status": "Deprecated",
"LastUpdate": "2018-10-25",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "52925-312-06",
"PackageDescription": "17 g in 1 CAN (52925-312-06) ",
"NDC11Code": "52925-0312-06",
"ProductNDC": "52925-312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vcf Contraceptive",
"NonProprietaryName": "Nonoxynol-9",
"DosageFormName": "AEROSOL, FOAM",
"RouteName": "VAGINAL",
"StartMarketingDate": "19970601",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "APOTHECUS PHARMACEUTICAL CORP",
"SubstanceName": "NONOXYNOL-9",
"StrengthNumber": "125",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "19970601",
"SamplePackage": "N",
"IndicationAndUsage": "for the prevention of pregnancy."
},
{
"NDCCode": "55648-312-06",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (55648-312-06) > 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55648-0312-06",
"ProductNDC": "55648-312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091267",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Donepezil hydrochloride is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's Disease (1).",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2,3-dihydro-5,6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white to off-white powder and is soluble in water and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, microcrystalline cellulose and magnesium stearate. The film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Additionally, the 10 mg tablet contains iron oxide yellow as a coloring agent."
},
{
"NDCCode": "64108-312-06",
"PackageDescription": "6 DOSE PACK in 1 BOX (64108-312-06) > 20 mL in 1 DOSE PACK (64108-312-01) ",
"NDC11Code": "64108-0312-06",
"ProductNDC": "64108-312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ocufresh",
"NonProprietaryName": "Water",
"DosageFormName": "LIQUID",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20110901",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part349",
"LabelerName": "Optics Laboratory, Inc",
"SubstanceName": "WATER",
"StrengthNumber": "98.8",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20110901",
"SamplePackage": "N"
},
{
"NDCCode": "64679-312-06",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (64679-312-06) > 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "64679-0312-06",
"ProductNDC": "64679-312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091267",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20110528",
"SamplePackage": "N",
"IndicationAndUsage": "Donepezil hydrochloride is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's Disease (1).",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2,3-dihydro-5,6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white to off-white powder and is soluble in water and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, microcrystalline cellulose and magnesium stearate. The film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Additionally, the 10 mg tablet contains iron oxide yellow as a coloring agent."
},
{
"NDCCode": "68428-312-06",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (68428-312-06) ",
"NDC11Code": "68428-0312-06",
"ProductNDC": "68428-312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Chlorinum",
"NonProprietaryName": "Chlorine",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "CHLORINE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2022-04-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N"
},
{
"NDCCode": "69168-312-06",
"PackageDescription": "120 TABLET in 1 BOTTLE (69168-312-06) ",
"NDC11Code": "69168-0312-06",
"ProductNDC": "69168-312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aspirin",
"NonProprietaryName": "Aspirin 325 Mg",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141218",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "Allegiant Health",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "325",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231106",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves: 1 headache, 2 pain and fever of colds, 3 toothache, 4 menstrual pain, 5 muscle pain, 6 minor pain of arthritis."
},
{
"NDCCode": "83013-312-06",
"PackageDescription": "60 g in 1 BOTTLE, PUMP (83013-312-06) ",
"NDC11Code": "83013-0312-06",
"ProductNDC": "83013-312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hismile",
"NonProprietaryName": "Coconut Whip Flavor Sodium Fluoride Anticavity Toothpaste",
"DosageFormName": "GEL",
"RouteName": "DENTAL",
"StartMarketingDate": "20240114",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M021",
"LabelerName": "Hismile Pty Ltd",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": "2.4",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2026-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240114",
"SamplePackage": "N",
"IndicationAndUsage": "aids in the prevention of dental cavities."
},
{
"NDCCode": "84126-312-12",
"PackageDescription": "1 KIT in 1 PACKAGE (84126-312-12) * 177 mL in 1 BOTTLE, PLASTIC (84126-310-06) * 177 mL in 1 BOTTLE, PLASTIC (84126-311-06) ",
"NDC11Code": "84126-0312-12",
"ProductNDC": "84126-312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vicks Dayquil Kids And Vicks Nyquil Kids",
"ProprietaryNameSuffix": "Free Of Artificial Dyes And Sugar Cold And Cough Plus",
"NonProprietaryName": "Dextromethorphan Hbr, Guaifenesin, Diphenhydramine Hcl",
"DosageFormName": "KIT",
"RouteName": "ORAL",
"StartMarketingDate": "20240625",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240625",
"SamplePackage": "N"
},
{
"NDCCode": "68083-287-01",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 BOX (68083-287-01) / 6 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "68083-0287-01",
"ProductNDC": "68083-287",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azelastine Hydrochloride",
"NonProprietaryName": "Azelastine Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "INTRAOCULAR",
"StartMarketingDate": "20200225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210092",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "AZELASTINE HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200225",
"SamplePackage": "N",
"IndicationAndUsage": "Azelastine hydrochloride ophthalmic solution is indicated for the treatment of itching of the eye associated with allergic conjunctivitis.",
"Description": "Azelastine hydrochloride ophthalmic solution, 0.05% is a sterile ophthalmic solution containing azelastine hydrochloride, a relatively selective H1-receptor antagonist for topical administration to the eyes. Azelastine hydrochloride is a white crystalline powder with a molecular weight of 418.37. Azelastine hydrochloride is sparingly soluble in water, methanol and propylene glycol, and slightly soluble in ethanol, octanol, and glycerine. Azelastine hydrochloride is a racemic mixture with a melting point of 225°C. The chemical name for azelastine hydrochloride is (±)-1-(2H)-phthalazinone,4-[(4-chlorophenyl)methyl]-2-(hexahydro-1-methyl-1H-azepin-4-yl), monohydrochloride and is represented by the following chemical structure: Empirical chemical structure: C22 H24ClN3O.HCl Each mL of azelastine hydrochloride ophthalmic solution contains: Active: 0.5 mg azelastine hydrochloride, equivalent to 0.457 mg of azelastine base; Preservative: 0.125 mg benzalkonium chloride; Inactives: disodium edetate dihydrate, hypromellose, sorbitol solution, sodium hydroxide and water for injection. It has a pH of approximately 5.0 to 6.5 and an osmolarity of approximately 271 to 312 mOsmol/L."
},
{
"NDCCode": "68083-146-10",
"PackageDescription": "10 VIAL in 1 CARTON (68083-146-10) / 20 mL in 1 VIAL",
"NDC11Code": "68083-0146-10",
"ProductNDC": "68083-146",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meropenem",
"NonProprietaryName": "Meropenem",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170428",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206141",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "MEROPENEM",
"StrengthNumber": "500",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170428",
"SamplePackage": "N",
"IndicationAndUsage": "Meropenem for Injection is a penem antibacterial indicated for the treatment of: Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) Complicated intra-abdominal infections (adult and pediatric patients). (1.2) Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) To reduce the development of drug-resistant bacteria and maintain the effectiveness of Meropenem for Injection and other antibacterial drugs, Meropenem for Injection should only be used to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.",
"Description": "Meropenem for Injection, USP is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6- [(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is. Meropenem for Injection, USP is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 1 gram Meropenem for Injection, USP vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg Meropenem for Injection, USP vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration (2.4)]."
},
{
"NDCCode": "68083-147-10",
"PackageDescription": "10 VIAL in 1 CARTON (68083-147-10) / 30 mL in 1 VIAL",
"NDC11Code": "68083-0147-10",
"ProductNDC": "68083-147",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meropenem",
"NonProprietaryName": "Meropenem",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170428",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206141",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "MEROPENEM",
"StrengthNumber": "1",
"StrengthUnit": "g/30mL",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170428",
"SamplePackage": "N",
"IndicationAndUsage": "Meropenem for Injection is a penem antibacterial indicated for the treatment of: Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) Complicated intra-abdominal infections (adult and pediatric patients). (1.2) Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) To reduce the development of drug-resistant bacteria and maintain the effectiveness of Meropenem for Injection and other antibacterial drugs, Meropenem for Injection should only be used to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.",
"Description": "Meropenem for Injection, USP is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6- [(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is. Meropenem for Injection, USP is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 1 gram Meropenem for Injection, USP vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg Meropenem for Injection, USP vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration (2.4)]."
},
{
"NDCCode": "68083-172-01",
"PackageDescription": "4 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 CARTON (68083-172-01) ",
"NDC11Code": "68083-0172-01",
"ProductNDC": "68083-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Deferoxamine Mesylate",
"NonProprietaryName": "Deferoxamine Mesylate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20171009",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207384",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "DEFEROXAMINE MESYLATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Iron Chelating Activity [MoA], Iron Chelator [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171009",
"SamplePackage": "N",
"IndicationAndUsage": "Deferoxamine mesylate for injection is an iron-chelating agent indicated: As an adjunct to standard measures for the treatment of acute iron intoxication. (1.1) For the treatment of transfusional iron overload in patients with chronic anemia. (1.2) Limitations of Use Deferoxamine mesylate for injection is not indicated for the treatment of primary hemochromatosis (since phlebotomy is the method of choice for removing excess iron in this disorder).",
"Description": "Deferoxamine mesylate for injection USP, is an iron-chelating agent, available in vials for injection via intramuscular, subcutaneous, and intravenous administration. Deferoxamine mesylate for injection USP, is supplied as vials containing 500 mg of deferoxamine mesylate USP (corresponding to 426.82 mg of deferoxamine as free base) and 2 g of deferoxamine mesylate USP (corresponding to 1.707 g of deferoxamine as free base) in sterile, lyophilized form. Deferoxamine mesylate is N-[5-[3-[(5-aminopentyl)hydroxycarbamoyl]propionamido]pentyl]-3-[[5-(N-hydroxyacetamido)pentyl]carbamoyl]propionohydroxamic acid monomethanesulfonate (salt), and its structural formula is. Deferoxamine mesylate, USP is a white crystalline powder. It is freely soluble in water and slightly soluble in methanol. Its molecular weight is 656.79 g/mol."
},
{
"NDCCode": "68083-173-01",
"PackageDescription": "4 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 CARTON (68083-173-01) ",
"NDC11Code": "68083-0173-01",
"ProductNDC": "68083-173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Deferoxamine Mesylate",
"NonProprietaryName": "Deferoxamine Mesylate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20171009",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207384",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "DEFEROXAMINE MESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Iron Chelating Activity [MoA], Iron Chelator [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171009",
"SamplePackage": "N",
"IndicationAndUsage": "Deferoxamine mesylate for injection is an iron-chelating agent indicated: As an adjunct to standard measures for the treatment of acute iron intoxication. (1.1) For the treatment of transfusional iron overload in patients with chronic anemia. (1.2) Limitations of Use Deferoxamine mesylate for injection is not indicated for the treatment of primary hemochromatosis (since phlebotomy is the method of choice for removing excess iron in this disorder).",
"Description": "Deferoxamine mesylate for injection USP, is an iron-chelating agent, available in vials for injection via intramuscular, subcutaneous, and intravenous administration. Deferoxamine mesylate for injection USP, is supplied as vials containing 500 mg of deferoxamine mesylate USP (corresponding to 426.82 mg of deferoxamine as free base) and 2 g of deferoxamine mesylate USP (corresponding to 1.707 g of deferoxamine as free base) in sterile, lyophilized form. Deferoxamine mesylate is N-[5-[3-[(5-aminopentyl)hydroxycarbamoyl]propionamido]pentyl]-3-[[5-(N-hydroxyacetamido)pentyl]carbamoyl]propionohydroxamic acid monomethanesulfonate (salt), and its structural formula is. Deferoxamine mesylate, USP is a white crystalline powder. It is freely soluble in water and slightly soluble in methanol. Its molecular weight is 656.79 g/mol."
},
{
"NDCCode": "68083-195-01",
"PackageDescription": "1 VIAL in 1 CARTON (68083-195-01) / 50 mL in 1 VIAL",
"NDC11Code": "68083-0195-01",
"ProductNDC": "68083-195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexrazoxane",
"NonProprietaryName": "Dexrazoxane For Injection",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20161205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207321",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "DEXRAZOXANE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/50mL",
"Pharm_Classes": "Cytoprotective Agent [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161205",
"SamplePackage": "N",
"IndicationAndUsage": "Dexrazoxane for injection is indicated for reducing the incidence and severity of cardiomyopathy associated with doxorubicin administration in women with metastatic breast cancer who have received a cumulative doxorubicin dose of 300 mg/m2 and who will continue to receive doxorubicin therapy to maintain tumor control. Do not use with the initiation of doxorubicin therapy [see Warnings and Precautions (5.2)].",
"Description": "Dexrazoxane for injection, a cardioprotective agent for use in conjunction with doxorubicin, is a sterile, pyrogen-free lyophilizate intended for intravenous administration. Chemically, dexrazoxane is (S)-4,4'-(1-methyl-1,2-ethanediyl)bis-2,6-piperazinedione. The structural formula is as follows. C11H16N4O4 M.W. 268.28 Dexrazoxane, an intracellular chelating agent, is a derivative of EDTA. Dexrazoxane is off white to light yellow colored powder that melts at 191° to 197°C. It is sparingly soluble in water and 0.1 N HCl, slightly soluble in ethanol and methanol, and practically insoluble in nonpolar organic solvents. The pKa is 2.1. Dexrazoxane has an octanol/water partition coefficient of 0.025 and degrades rapidly above a pH of 7.0.Each 250 mg vial contains dexrazoxane hydrochloride equivalent to 250 mg dexrazoxane. Hydrochloric Acid, NF is added for pH adjustment. When reconstituted as directed with 25 mL of Sterile Water for Injection, USP, each mL contains: 10 mg dexrazoxane. The pH of the resultant solution is 1.0 to 3.0.Each 500 mg vial contains dexrazoxane hydrochloride equivalent to 500 mg dexrazoxane. Hydrochloric Acid, NF is added for pH adjustment. When reconstituted as directed with 50 mL of Sterile Water for Injection, USP, each mL contains: 10 mg dexrazoxane. The pH of the resultant solution is 1.0 to 3.0. The reconstituted dexrazoxane for injection solutions prepared from Sterile Water for Injection, USP, are intended for further dilution with Lactated Ringer’s Injection, USP, for rapid intravenous drip infusion. DO NOT ADMINISTER VIA AN INTRAVENOUS PUSH [see Dosage and Administration (2.1, 2.3)]."
},
{
"NDCCode": "68083-210-01",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (68083-210-01) > 3 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "68083-0210-01",
"ProductNDC": "68083-210",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Moxifloxacin Ophthalmic Solution",
"NonProprietaryName": "Moxifloxacin Ophthalmic",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208778",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "MOXIFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Quinolone Antimicrobial [EPC], Quinolones [CS]",
"Status": "Active",
"LastUpdate": "2020-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200330",
"SamplePackage": "N",
"IndicationAndUsage": "Moxifloxacin ophthalmic solution is indicated for the treatment of bacterial conjunctivitis caused by susceptible strains of the following organisms:Corynebacterium species* Micrococcus luteus* Staphylococcus aureus Staphylococcus epidermidis Staphylococcus haemolyticus Staphylococcus hominis Staphylococcus warneri* Streptococcus pneumoniae Streptococcus viridans groupAcinetobacter lwoffii* Haemophilus influenzae Haemophilus parainfluenzae* Chlamydia trachomatis*Efficacy for this organism was studied in fewer than 10 infections.",
"Description": "Moxifloxacin ophthalmic solution USP, 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. The chemical name for moxifloxacin hydrochloride is 1-Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)-octahydro-6H-pyrrolol [3,4b]pyridin-6-yl]-4-oxo-3-quinolinecarboxylic acid, monohydrochloride. The molecular formula for moxifloxacin hydrochloride is C21H24FN3O4HCl and its molecular weight is 437.9 g/mol. The chemical structure is presented below. Moxifloxacin hydrochloride is a slightly yellow to yellow crystalline powder. Each mL of moxifloxacin ophthalmic solution USP, 0.5% contains 5.45 mg moxifloxacin hydrochloride, equivalent to 5 mg moxifloxacin base. Moxifloxacin ophthalmic solution contains Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, sodium chloride, and water for injection. May also contain hydrochloric acid/sodium hydroxide to adjust pH to approximately 6.3 to 7.3. Moxifloxacin ophthalmic solution is an isotonic solution with an osmolality of approximately 290 mOsm/kg."
},
{
"NDCCode": "68083-259-01",
"PackageDescription": "1 KIT in 1 CARTON (68083-259-01) * 10 mL in 1 VIAL, SINGLE-USE (68083-261-01) * 10 mL in 1 VIAL, SINGLE-DOSE (68083-260-01) ",
"NDC11Code": "68083-0259-01",
"ProductNDC": "68083-259",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Melphalan Hydrochloride",
"NonProprietaryName": "Melphalan Hydrochloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20190610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209826",
"LabelerName": "Gland Pharma Limited",
"Status": "Active",
"LastUpdate": "2019-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190610",
"SamplePackage": "N",
"IndicationAndUsage": "Melphalan hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.",
"Description": "Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as melphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ∼2.5. Melphalan hydrochloride for Injection is supplied as a sterile, nonpyrogenic, white to off white lyophilized cake or powder. Each single-use vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone. Melphalan hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL. Melphalan hydrochloride for Injection is administered intravenously."
},
{
"NDCCode": "68083-300-50",
"PackageDescription": "50 VIAL, SINGLE-DOSE in 1 CARTON (68083-300-50) / 2 mL in 1 VIAL, SINGLE-DOSE (68083-300-01) ",
"NDC11Code": "68083-0300-50",
"ProductNDC": "68083-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxercalciferol",
"NonProprietaryName": "Doxercalciferol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190926",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210452",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "DOXERCALCIFEROL",
"StrengthNumber": "4",
"StrengthUnit": "ug/2mL",
"Pharm_Classes": "Ergocalciferols [CS], Vitamin D2 Analog [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190926",
"SamplePackage": "N",
"IndicationAndUsage": " Doxercalciferol Injection is indicated for the treatment of secondary hyperparathyroidism in adult patients with CKD on dialysis.",
"Description": "Doxercalciferol Injection contains doxercalciferol, which is a synthetic vitamin D2 analog. Doxercalciferol undergoes metabolic activation in vivo to form 1α,25-dihydroxyvitamin D2 (1α,25-(OH)2D2), a naturally occurring, biologically active form of vitamin D2. Doxercalciferol is a colorless crystalline compound with a calculated molecular weight of 412.66 and a molecular formula of C28H44O2. It is soluble in oils and organic solvents, but is relatively insoluble in water. Chemically, doxercalciferol is (1α,3β,5Z,7E,22E)-9,10-secoergosta-5,7,10(19),22-tetraene-1,3-diol. The structural formula is. Doxercalciferol Injection 2 mL single-dose vials contain 4 mcg/2 mL (2 mcg/mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene (0.02 mg); disodium edetate (1.1 mg); ethanol (0.05 mL); polysorbate 20 (10 mg); sodium chloride (1.5 mg); sodium phosphate dibasic, heptahydrate (14.4 mg); and sodium phosphate monobasic, monohydrate (1.8 mg). Doxercalciferol Injection 2 mL multiple-dose vials contain 4 mcg/2 mL (2 mcg/mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene (0.02 mg); disodium edetate (1.1 mg); ethanol (0.075 mL); polysorbate 20 (10 mg); sodium chloride (1.5 mg); sodium phosphate dibasic, heptahydrate (14.4 mg); and sodium phosphate monobasic, monohydrate (1.8 mg)."
},
{
"NDCCode": "68083-359-50",
"PackageDescription": "50 VIAL, MULTI-DOSE in 1 CARTON (68083-359-50) / 2 mL in 1 VIAL, MULTI-DOSE (68083-359-01) ",
"NDC11Code": "68083-0359-50",
"ProductNDC": "68083-359",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxercalciferol",
"NonProprietaryName": "Doxercalciferol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190926",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210452",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "DOXERCALCIFEROL",
"StrengthNumber": "4",
"StrengthUnit": "ug/2mL",
"Pharm_Classes": "Ergocalciferols [CS], Vitamin D2 Analog [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190926",
"SamplePackage": "N",
"IndicationAndUsage": " Doxercalciferol Injection is indicated for the treatment of secondary hyperparathyroidism in adult patients with CKD on dialysis.",
"Description": "Doxercalciferol Injection contains doxercalciferol, which is a synthetic vitamin D2 analog. Doxercalciferol undergoes metabolic activation in vivo to form 1α,25-dihydroxyvitamin D2 (1α,25-(OH)2D2), a naturally occurring, biologically active form of vitamin D2. Doxercalciferol is a colorless crystalline compound with a calculated molecular weight of 412.66 and a molecular formula of C28H44O2. It is soluble in oils and organic solvents, but is relatively insoluble in water. Chemically, doxercalciferol is (1α,3β,5Z,7E,22E)-9,10-secoergosta-5,7,10(19),22-tetraene-1,3-diol. The structural formula is. Doxercalciferol Injection 2 mL single-dose vials contain 4 mcg/2 mL (2 mcg/mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene (0.02 mg); disodium edetate (1.1 mg); ethanol (0.05 mL); polysorbate 20 (10 mg); sodium chloride (1.5 mg); sodium phosphate dibasic, heptahydrate (14.4 mg); and sodium phosphate monobasic, monohydrate (1.8 mg). Doxercalciferol Injection 2 mL multiple-dose vials contain 4 mcg/2 mL (2 mcg/mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene (0.02 mg); disodium edetate (1.1 mg); ethanol (0.075 mL); polysorbate 20 (10 mg); sodium chloride (1.5 mg); sodium phosphate dibasic, heptahydrate (14.4 mg); and sodium phosphate monobasic, monohydrate (1.8 mg)."
},
{
"NDCCode": "68083-388-01",
"PackageDescription": "1 VIAL in 1 CARTON (68083-388-01) / 25 mL in 1 VIAL",
"NDC11Code": "68083-0388-01",
"ProductNDC": "68083-388",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexrazoxane",
"NonProprietaryName": "Dexrazoxane For Injection",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207321",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "DEXRAZOXANE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Cytoprotective Agent [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191216",
"SamplePackage": "N",
"IndicationAndUsage": "Dexrazoxane for injection is indicated for reducing the incidence and severity of cardiomyopathy associated with doxorubicin administration in women with metastatic breast cancer who have received a cumulative doxorubicin dose of 300 mg/m2 and who will continue to receive doxorubicin therapy to maintain tumor control. Do not use with the initiation of doxorubicin therapy [see Warnings and Precautions (5.2)].",
"Description": "Dexrazoxane for injection, a cardioprotective agent for use in conjunction with doxorubicin, is a sterile, pyrogen-free lyophilizate intended for intravenous administration. Chemically, dexrazoxane is (S)-4,4'-(1-methyl-1,2-ethanediyl)bis-2,6-piperazinedione. The structural formula is as follows. C11H16N4O4 M.W. 268.28 Dexrazoxane, an intracellular chelating agent, is a derivative of EDTA. Dexrazoxane is off white to light yellow colored powder that melts at 191° to 197°C. It is sparingly soluble in water and 0.1 N HCl, slightly soluble in ethanol and methanol, and practically insoluble in nonpolar organic solvents. The pKa is 2.1. Dexrazoxane has an octanol/water partition coefficient of 0.025 and degrades rapidly above a pH of 7.0.Each 250 mg vial contains dexrazoxane hydrochloride equivalent to 250 mg dexrazoxane. Hydrochloric Acid, NF is added for pH adjustment. When reconstituted as directed with 25 mL of Sterile Water for Injection, USP, each mL contains: 10 mg dexrazoxane. The pH of the resultant solution is 1.0 to 3.0.Each 500 mg vial contains dexrazoxane hydrochloride equivalent to 500 mg dexrazoxane. Hydrochloric Acid, NF is added for pH adjustment. When reconstituted as directed with 50 mL of Sterile Water for Injection, USP, each mL contains: 10 mg dexrazoxane. The pH of the resultant solution is 1.0 to 3.0. The reconstituted dexrazoxane for injection solutions prepared from Sterile Water for Injection, USP, are intended for further dilution with Lactated Ringer’s Injection, USP, for rapid intravenous drip infusion. DO NOT ADMINISTER VIA AN INTRAVENOUS PUSH [see Dosage and Administration (2.1, 2.3)]."
},
{
"NDCCode": "68083-398-85",
"PackageDescription": "1000 BOTTLE, PLASTIC in 1 CASE (68083-398-85) / 2.5 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "68083-0398-85",
"ProductNDC": "68083-398",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Olopatadine Hydrochloride Ophthalmic",
"DosageFormName": "SOLUTION",
"StartMarketingDate": "20260106",
"MarketingCategoryName": "EXPORT ONLY",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "7",
"StrengthUnit": "mg/mL",
"Status": "Unfinished",
"LastUpdate": "2026-02-06",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "06-JAN-26"
},
{
"NDCCode": "68083-399-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (68083-399-01) / 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "68083-0399-01",
"ProductNDC": "68083-399",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Docetaxel",
"NonProprietaryName": "Docetaxel",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213510",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "DOCETAXEL ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210701",
"SamplePackage": "N",
"IndicationAndUsage": "Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).",
"Description": "Docetaxel, USP is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white, crystalline powder with an empirical formula of C43H53NO14 and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous) USP, 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid, USP 23% v/v, dehydrated alcohol, USP and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution."
},
{
"NDCCode": "68083-400-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (68083-400-01) / 8 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "68083-0400-01",
"ProductNDC": "68083-400",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Docetaxel",
"NonProprietaryName": "Docetaxel",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213510",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "DOCETAXEL ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210701",
"SamplePackage": "N",
"IndicationAndUsage": "Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).",
"Description": "Docetaxel, USP is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white, crystalline powder with an empirical formula of C43H53NO14 and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous) USP, 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid, USP 23% v/v, dehydrated alcohol, USP and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution."
},
{
"NDCCode": "68083-401-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (68083-401-01) / 16 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "68083-0401-01",
"ProductNDC": "68083-401",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Docetaxel",
"NonProprietaryName": "Docetaxel",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213510",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "DOCETAXEL ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210701",
"SamplePackage": "N",
"IndicationAndUsage": "Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).",
"Description": "Docetaxel, USP is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white, crystalline powder with an empirical formula of C43H53NO14 and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous) USP, 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid, USP 23% v/v, dehydrated alcohol, USP and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution."
},
{
"NDCCode": "68083-496-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (68083-496-10) > 4 mL in 1 VIAL, SINGLE-DOSE (68083-496-01) ",
"NDC11Code": "68083-0496-10",
"ProductNDC": "68083-496",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216434",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2022-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220526",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium dihydrate 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula:. C17H20N2O5S Molecular weight: 364.42."
},
{
"NDCCode": "68083-497-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (68083-497-10) > 10 mL in 1 VIAL, MULTI-DOSE (68083-497-01) ",
"NDC11Code": "68083-0497-10",
"ProductNDC": "68083-497",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216434",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2022-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220526",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium dihydrate 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula:. C17H20N2O5S Molecular weight: 364.42."
},
{
"NDCCode": "68083-553-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (68083-553-01) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "68083-0553-01",
"ProductNDC": "68083-553",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Angiotensin Ii",
"NonProprietaryName": "Angiotensin Ii",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216966",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "ANGIOTENSIN II",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Vasoconstriction [PE], Vasoconstrictor [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250603",
"SamplePackage": "N",
"IndicationAndUsage": "Angiotensin II Injection increases blood pressure in adults with septic or other distributive shock.",
"Description": "Angiotensin II is a naturally occurring peptide hormone of the renin-angiotensin-aldosterone system (RAAS) that causes vasoconstriction and an increase in blood pressure. Angiotensin II Injection is a sterile, aqueous solution of synthetic human angiotensin II for intravenous administration by infusion. Each 1 mL of Angiotensin II Injection contains 2.5 mg angiotensin II equivalent to an average of 2.9 mg angiotensin II acetate, 25 mg mannitol, and Water for Injection adjusted with sodium hydroxide and/or hydrochloric acid to pH of 5.5.The chemical name of the synthetic angiotensin II acetate is L-Aspartyl-L-arginyl-L-valyl-L-tyrosyl-L-isoleucyl-L-histidyl-L-prolyl-L-phenylalanine, acetate salt. The counter ion acetate is present in a non-stoichiometric ratio. It is a white to off-white powder, soluble in water.The structure of angiotensin II acetate is shown below. Molecular formula: C50H71N13O12 (C2H4O2) n; (n= number of acetate molecules; theoretical n= 3)Average molecular weight: 1046.2 (as free base)."
},
{
"NDCCode": "68083-568-01",
"PackageDescription": "1 VIAL in 1 CARTON (68083-568-01) / 50 mL in 1 VIAL",
"NDC11Code": "68083-0568-01",
"ProductNDC": "68083-568",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Argatroban",
"NonProprietaryName": "Argatroban",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217848",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "ARGATROBAN",
"StrengthNumber": "50",
"StrengthUnit": "mg/50mL",
"Pharm_Classes": "Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230731",
"SamplePackage": "N",
"IndicationAndUsage": "Argatroban is a direct thrombin inhibitor indicated: For prophylaxis or treatment of thrombosis in adult patients with heparin-induced thrombocytopenia (HIT) (1.1) As an anticoagulant in adult patients with or at risk for HIT undergoing percutaneous coronary intervention (PCI) (1.2).",
"Description": "Argatroban is a synthetic direct thrombin inhibitor and the chemical name is 1-[5-[(aminoiminomethyl)amino]-1-oxo-2-[[(1,2,3,4-tetrahydro-3-methyl-8-quinolinyl)sulfonyl]amino]pentyl]-4-methyl-2-piperidinecarboxylic acid, monohydrate. Argatroban has 4 asymmetric carbons. One of the asymmetric carbons has an R configuration (stereoisomer Type I) and an S configuration (stereoisomer Type II). Argatroban consists of a mixture of R and S stereoisomers at a ratio of approximately 65:35. The molecular formula of argatroban is C23H36N6O5SH2O. Its molecular weight is 526.66 g/mol. The structural formula is shown below. Argatroban is a white to off white crystalline powder that is freely soluble in acetic acid, sparingly soluble in methanol, slightly soluble in ethanol and very slightly soluble in water. Argatroban Injection, USP 50 mg/50 mL (1 mg/mL) is a sterile clear, colorless to pale yellow, solution. Argatroban Injection, USP 50 mg/50 mL (1 mg/mL) is available in 50-mg (in 50-mL) single-dose vials, with blue color matte top caps. Each mL of sterile, nonpyrogenic solution contains 1 mg Argatroban. Inert ingredients (per vial): 260 mg Propylene glycol, 152 mg Dehydrated alcohol, and 450 mg Sodium Chloride."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68083-312-06</NDCCode>
<PackageDescription>6 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (68083-312-06) > 30 mL in 1 VIAL, PHARMACY BULK PACKAGE (68083-312-01) </PackageDescription>
<NDC11Code>68083-0312-06</NDC11Code>
<ProductNDC>68083-312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210518</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211189</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>TOBRAMYCIN SULFATE</SubstanceName>
<StrengthNumber>1.2</StrengthNumber>
<StrengthUnit>g/30mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiella sp. Lower respiratory tract infections caused by P. aeruginosa, Klebsiella sp, Enterobacter sp, Serratia sp, E. coli, and S. aureus (penicillinase and non-penicillinase-producing strains). Serious central-nervous-system infections (meningitis) caused by susceptible organisms. Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella sp, and Enterobacter sp. Skin, bone, and skin structure infections caused by P. aeruginosa, Proteus sp, E. coli, Klebsiella sp, Enterobacter sp, and S. aureusComplicated and recurrent urinary tract infections caused by P. aeruginosa, Proteus sp, (indole-positive and indole- negative), E. coli, Klebsiella sp, Enterobacter sp, Serratia sp, S. aureus, Providencia sp, and Citrobacter sp. Aminoglycosides, including tobramycin sulphate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram- negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulphate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGS box above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Sterile tobramycin sulfate is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C18H37N5O9)2 5H2SO4. The molecular weight is 1,425.39. The structural formula for tobramycin is as follows. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for proper use of Pharmacy Bulk Package).</Description>
</NDC>
<NDC>
<NDCCode>68083-233-06</NDCCode>
<PackageDescription>6 VIAL, SINGLE-DOSE in 1 CARTON (68083-233-06) / 50 mL in 1 VIAL, SINGLE-DOSE (68083-233-01) </PackageDescription>
<NDC11Code>68083-0233-06</NDC11Code>
<ProductNDC>68083-233</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nelarabine</ProprietaryName>
<NonProprietaryName>Nelarabine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212605</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>NELARABINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nelarabine is indicated for the treatment of T-cell acute lymphoblastic leukemia (T-ALL) and T-cell lymphoblastic lymphoma (T-LBL) in adult and pediatric patients age 1 year and older whose disease has not responded to or has relapsed following treatment with at least 2 chemotherapy regimens.</IndicationAndUsage>
<Description>Nelarabine is a prodrug of the cytotoxic deoxyguanosine analogue, 9-β-D-arabinofuranosylguanine (ara-G).The chemical name for nelarabine is 2-amino-9-β-D-arabinofuranosyl-6-methoxy-9H-purine. It has the molecular formula C11H15N5O5 and a molecular weight of 297.27. Nelarabine has the following structural formula. Nelarabine is slightly soluble to soluble in water and melts with decomposition between 209°C and 217°C.Nelarabine injection is supplied as a clear, colorless, sterile solution in glass single-dose vials. Each vial contains 250 mg of nelarabine (5 mg nelarabine per mL) and the inactive ingredient sodium chloride (4.5 mg per mL) in Water for Injection, USP. Nelarabine is intended for intravenous infusion. Hydrochloric acid and sodium hydroxide may have been used to adjust the pH. The solution pH ranges from 5.0 to 7.0.</Description>
</NDC>
<NDC>
<NDCCode>43419-312-06</NDCCode>
<PackageDescription>14 g in 1 CONTAINER (43419-312-06)</PackageDescription>
<NDC11Code>43419-0312-06</NDC11Code>
<ProductNDC>43419-312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Iope Retigen Moisture Twin Cake No.23</ProprietaryName>
<NonProprietaryName>Octinoxate, Titanium Dioxide, And Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>AMOREPACIFIC</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>.84; .868; .4116</StrengthNumber>
<StrengthUnit>g/14g; g/14g; g/14g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-10-25</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>52925-312-06</NDCCode>
<PackageDescription>17 g in 1 CAN (52925-312-06) </PackageDescription>
<NDC11Code>52925-0312-06</NDC11Code>
<ProductNDC>52925-312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vcf Contraceptive</ProprietaryName>
<NonProprietaryName>Nonoxynol-9</NonProprietaryName>
<DosageFormName>AEROSOL, FOAM</DosageFormName>
<RouteName>VAGINAL</RouteName>
<StartMarketingDate>19970601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>APOTHECUS PHARMACEUTICAL CORP</LabelerName>
<SubstanceName>NONOXYNOL-9</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the prevention of pregnancy.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55648-312-06</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (55648-312-06) > 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55648-0312-06</NDC11Code>
<ProductNDC>55648-312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091267</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Donepezil hydrochloride is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's Disease (1).</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2,3-dihydro-5,6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white to off-white powder and is soluble in water and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, microcrystalline cellulose and magnesium stearate. The film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Additionally, the 10 mg tablet contains iron oxide yellow as a coloring agent.</Description>
</NDC>
<NDC>
<NDCCode>64108-312-06</NDCCode>
<PackageDescription>6 DOSE PACK in 1 BOX (64108-312-06) > 20 mL in 1 DOSE PACK (64108-312-01) </PackageDescription>
<NDC11Code>64108-0312-06</NDC11Code>
<ProductNDC>64108-312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ocufresh</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20110901</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part349</ApplicationNumber>
<LabelerName>Optics Laboratory, Inc</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>98.8</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64679-312-06</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (64679-312-06) > 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0312-06</NDC11Code>
<ProductNDC>64679-312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091267</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Donepezil hydrochloride is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's Disease (1).</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2,3-dihydro-5,6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white to off-white powder and is soluble in water and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, microcrystalline cellulose and magnesium stearate. The film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Additionally, the 10 mg tablet contains iron oxide yellow as a coloring agent.</Description>
</NDC>
<NDC>
<NDCCode>68428-312-06</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (68428-312-06) </PackageDescription>
<NDC11Code>68428-0312-06</NDC11Code>
<ProductNDC>68428-312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Chlorinum</ProprietaryName>
<NonProprietaryName>Chlorine</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>CHLORINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-04-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69168-312-06</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (69168-312-06) </PackageDescription>
<NDC11Code>69168-0312-06</NDC11Code>
<ProductNDC>69168-312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aspirin</ProprietaryName>
<NonProprietaryName>Aspirin 325 Mg</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141218</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>Allegiant Health</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>325</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves: 1 headache, 2 pain and fever of colds, 3 toothache, 4 menstrual pain, 5 muscle pain, 6 minor pain of arthritis.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>83013-312-06</NDCCode>
<PackageDescription>60 g in 1 BOTTLE, PUMP (83013-312-06) </PackageDescription>
<NDC11Code>83013-0312-06</NDC11Code>
<ProductNDC>83013-312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hismile</ProprietaryName>
<NonProprietaryName>Coconut Whip Flavor Sodium Fluoride Anticavity Toothpaste</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20240114</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M021</ApplicationNumber>
<LabelerName>Hismile Pty Ltd</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>2.4</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>aids in the prevention of dental cavities.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>84126-312-12</NDCCode>
<PackageDescription>1 KIT in 1 PACKAGE (84126-312-12) * 177 mL in 1 BOTTLE, PLASTIC (84126-310-06) * 177 mL in 1 BOTTLE, PLASTIC (84126-311-06) </PackageDescription>
<NDC11Code>84126-0312-12</NDC11Code>
<ProductNDC>84126-312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vicks Dayquil Kids And Vicks Nyquil Kids</ProprietaryName>
<ProprietaryNameSuffix>Free Of Artificial Dyes And Sugar Cold And Cough Plus</ProprietaryNameSuffix>
<NonProprietaryName>Dextromethorphan Hbr, Guaifenesin, Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240625</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68083-287-01</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 BOX (68083-287-01) / 6 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>68083-0287-01</NDC11Code>
<ProductNDC>68083-287</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azelastine Hydrochloride</ProprietaryName>
<NonProprietaryName>Azelastine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>INTRAOCULAR</RouteName>
<StartMarketingDate>20200225</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210092</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>AZELASTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200225</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azelastine hydrochloride ophthalmic solution is indicated for the treatment of itching of the eye associated with allergic conjunctivitis.</IndicationAndUsage>
<Description>Azelastine hydrochloride ophthalmic solution, 0.05% is a sterile ophthalmic solution containing azelastine hydrochloride, a relatively selective H1-receptor antagonist for topical administration to the eyes. Azelastine hydrochloride is a white crystalline powder with a molecular weight of 418.37. Azelastine hydrochloride is sparingly soluble in water, methanol and propylene glycol, and slightly soluble in ethanol, octanol, and glycerine. Azelastine hydrochloride is a racemic mixture with a melting point of 225°C. The chemical name for azelastine hydrochloride is (±)-1-(2H)-phthalazinone,4-[(4-chlorophenyl)methyl]-2-(hexahydro-1-methyl-1H-azepin-4-yl), monohydrochloride and is represented by the following chemical structure: Empirical chemical structure: C22 H24ClN3O.HCl Each mL of azelastine hydrochloride ophthalmic solution contains: Active: 0.5 mg azelastine hydrochloride, equivalent to 0.457 mg of azelastine base; Preservative: 0.125 mg benzalkonium chloride; Inactives: disodium edetate dihydrate, hypromellose, sorbitol solution, sodium hydroxide and water for injection. It has a pH of approximately 5.0 to 6.5 and an osmolarity of approximately 271 to 312 mOsmol/L.</Description>
</NDC>
<NDC>
<NDCCode>68083-146-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68083-146-10) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>68083-0146-10</NDC11Code>
<ProductNDC>68083-146</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meropenem</ProprietaryName>
<NonProprietaryName>Meropenem</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170428</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206141</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>MEROPENEM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170428</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meropenem for Injection is a penem antibacterial indicated for the treatment of: Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) Complicated intra-abdominal infections (adult and pediatric patients). (1.2) Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) To reduce the development of drug-resistant bacteria and maintain the effectiveness of Meropenem for Injection and other antibacterial drugs, Meropenem for Injection should only be used to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.</IndicationAndUsage>
<Description>Meropenem for Injection, USP is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6- [(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is. Meropenem for Injection, USP is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 1 gram Meropenem for Injection, USP vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg Meropenem for Injection, USP vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration (2.4)].</Description>
</NDC>
<NDC>
<NDCCode>68083-147-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68083-147-10) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>68083-0147-10</NDC11Code>
<ProductNDC>68083-147</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meropenem</ProprietaryName>
<NonProprietaryName>Meropenem</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170428</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206141</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>MEROPENEM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/30mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170428</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meropenem for Injection is a penem antibacterial indicated for the treatment of: Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) Complicated intra-abdominal infections (adult and pediatric patients). (1.2) Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) To reduce the development of drug-resistant bacteria and maintain the effectiveness of Meropenem for Injection and other antibacterial drugs, Meropenem for Injection should only be used to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.</IndicationAndUsage>
<Description>Meropenem for Injection, USP is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6- [(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is. Meropenem for Injection, USP is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 1 gram Meropenem for Injection, USP vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg Meropenem for Injection, USP vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration (2.4)].</Description>
</NDC>
<NDC>
<NDCCode>68083-172-01</NDCCode>
<PackageDescription>4 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 CARTON (68083-172-01) </PackageDescription>
<NDC11Code>68083-0172-01</NDC11Code>
<ProductNDC>68083-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Deferoxamine Mesylate</ProprietaryName>
<NonProprietaryName>Deferoxamine Mesylate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171009</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207384</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>DEFEROXAMINE MESYLATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Deferoxamine mesylate for injection is an iron-chelating agent indicated: As an adjunct to standard measures for the treatment of acute iron intoxication. (1.1) For the treatment of transfusional iron overload in patients with chronic anemia. (1.2) Limitations of Use Deferoxamine mesylate for injection is not indicated for the treatment of primary hemochromatosis (since phlebotomy is the method of choice for removing excess iron in this disorder).</IndicationAndUsage>
<Description>Deferoxamine mesylate for injection USP, is an iron-chelating agent, available in vials for injection via intramuscular, subcutaneous, and intravenous administration. Deferoxamine mesylate for injection USP, is supplied as vials containing 500 mg of deferoxamine mesylate USP (corresponding to 426.82 mg of deferoxamine as free base) and 2 g of deferoxamine mesylate USP (corresponding to 1.707 g of deferoxamine as free base) in sterile, lyophilized form. Deferoxamine mesylate is N-[5-[3-[(5-aminopentyl)hydroxycarbamoyl]propionamido]pentyl]-3-[[5-(N-hydroxyacetamido)pentyl]carbamoyl]propionohydroxamic acid monomethanesulfonate (salt), and its structural formula is. Deferoxamine mesylate, USP is a white crystalline powder. It is freely soluble in water and slightly soluble in methanol. Its molecular weight is 656.79 g/mol.</Description>
</NDC>
<NDC>
<NDCCode>68083-173-01</NDCCode>
<PackageDescription>4 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 CARTON (68083-173-01) </PackageDescription>
<NDC11Code>68083-0173-01</NDC11Code>
<ProductNDC>68083-173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Deferoxamine Mesylate</ProprietaryName>
<NonProprietaryName>Deferoxamine Mesylate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171009</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207384</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>DEFEROXAMINE MESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Deferoxamine mesylate for injection is an iron-chelating agent indicated: As an adjunct to standard measures for the treatment of acute iron intoxication. (1.1) For the treatment of transfusional iron overload in patients with chronic anemia. (1.2) Limitations of Use Deferoxamine mesylate for injection is not indicated for the treatment of primary hemochromatosis (since phlebotomy is the method of choice for removing excess iron in this disorder).</IndicationAndUsage>
<Description>Deferoxamine mesylate for injection USP, is an iron-chelating agent, available in vials for injection via intramuscular, subcutaneous, and intravenous administration. Deferoxamine mesylate for injection USP, is supplied as vials containing 500 mg of deferoxamine mesylate USP (corresponding to 426.82 mg of deferoxamine as free base) and 2 g of deferoxamine mesylate USP (corresponding to 1.707 g of deferoxamine as free base) in sterile, lyophilized form. Deferoxamine mesylate is N-[5-[3-[(5-aminopentyl)hydroxycarbamoyl]propionamido]pentyl]-3-[[5-(N-hydroxyacetamido)pentyl]carbamoyl]propionohydroxamic acid monomethanesulfonate (salt), and its structural formula is. Deferoxamine mesylate, USP is a white crystalline powder. It is freely soluble in water and slightly soluble in methanol. Its molecular weight is 656.79 g/mol.</Description>
</NDC>
<NDC>
<NDCCode>68083-195-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (68083-195-01) / 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>68083-0195-01</NDC11Code>
<ProductNDC>68083-195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexrazoxane</ProprietaryName>
<NonProprietaryName>Dexrazoxane For Injection</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20161205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207321</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>DEXRAZOXANE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/50mL</StrengthUnit>
<Pharm_Classes>Cytoprotective Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexrazoxane for injection is indicated for reducing the incidence and severity of cardiomyopathy associated with doxorubicin administration in women with metastatic breast cancer who have received a cumulative doxorubicin dose of 300 mg/m2 and who will continue to receive doxorubicin therapy to maintain tumor control. Do not use with the initiation of doxorubicin therapy [see Warnings and Precautions (5.2)].</IndicationAndUsage>
<Description>Dexrazoxane for injection, a cardioprotective agent for use in conjunction with doxorubicin, is a sterile, pyrogen-free lyophilizate intended for intravenous administration. Chemically, dexrazoxane is (S)-4,4'-(1-methyl-1,2-ethanediyl)bis-2,6-piperazinedione. The structural formula is as follows. C11H16N4O4 M.W. 268.28 Dexrazoxane, an intracellular chelating agent, is a derivative of EDTA. Dexrazoxane is off white to light yellow colored powder that melts at 191° to 197°C. It is sparingly soluble in water and 0.1 N HCl, slightly soluble in ethanol and methanol, and practically insoluble in nonpolar organic solvents. The pKa is 2.1. Dexrazoxane has an octanol/water partition coefficient of 0.025 and degrades rapidly above a pH of 7.0.Each 250 mg vial contains dexrazoxane hydrochloride equivalent to 250 mg dexrazoxane. Hydrochloric Acid, NF is added for pH adjustment. When reconstituted as directed with 25 mL of Sterile Water for Injection, USP, each mL contains: 10 mg dexrazoxane. The pH of the resultant solution is 1.0 to 3.0.Each 500 mg vial contains dexrazoxane hydrochloride equivalent to 500 mg dexrazoxane. Hydrochloric Acid, NF is added for pH adjustment. When reconstituted as directed with 50 mL of Sterile Water for Injection, USP, each mL contains: 10 mg dexrazoxane. The pH of the resultant solution is 1.0 to 3.0. The reconstituted dexrazoxane for injection solutions prepared from Sterile Water for Injection, USP, are intended for further dilution with Lactated Ringer’s Injection, USP, for rapid intravenous drip infusion. DO NOT ADMINISTER VIA AN INTRAVENOUS PUSH [see Dosage and Administration (2.1, 2.3)].</Description>
</NDC>
<NDC>
<NDCCode>68083-210-01</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (68083-210-01) > 3 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>68083-0210-01</NDC11Code>
<ProductNDC>68083-210</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Moxifloxacin Ophthalmic Solution</ProprietaryName>
<NonProprietaryName>Moxifloxacin Ophthalmic</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208778</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>MOXIFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC], Quinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Moxifloxacin ophthalmic solution is indicated for the treatment of bacterial conjunctivitis caused by susceptible strains of the following organisms:Corynebacterium species* Micrococcus luteus* Staphylococcus aureus Staphylococcus epidermidis Staphylococcus haemolyticus Staphylococcus hominis Staphylococcus warneri* Streptococcus pneumoniae Streptococcus viridans groupAcinetobacter lwoffii* Haemophilus influenzae Haemophilus parainfluenzae* Chlamydia trachomatis*Efficacy for this organism was studied in fewer than 10 infections.</IndicationAndUsage>
<Description>Moxifloxacin ophthalmic solution USP, 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. The chemical name for moxifloxacin hydrochloride is 1-Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)-octahydro-6H-pyrrolol [3,4b]pyridin-6-yl]-4-oxo-3-quinolinecarboxylic acid, monohydrochloride. The molecular formula for moxifloxacin hydrochloride is C21H24FN3O4HCl and its molecular weight is 437.9 g/mol. The chemical structure is presented below. Moxifloxacin hydrochloride is a slightly yellow to yellow crystalline powder. Each mL of moxifloxacin ophthalmic solution USP, 0.5% contains 5.45 mg moxifloxacin hydrochloride, equivalent to 5 mg moxifloxacin base. Moxifloxacin ophthalmic solution contains Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, sodium chloride, and water for injection. May also contain hydrochloric acid/sodium hydroxide to adjust pH to approximately 6.3 to 7.3. Moxifloxacin ophthalmic solution is an isotonic solution with an osmolality of approximately 290 mOsm/kg.</Description>
</NDC>
<NDC>
<NDCCode>68083-259-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (68083-259-01) * 10 mL in 1 VIAL, SINGLE-USE (68083-261-01) * 10 mL in 1 VIAL, SINGLE-DOSE (68083-260-01) </PackageDescription>
<NDC11Code>68083-0259-01</NDC11Code>
<ProductNDC>68083-259</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Melphalan Hydrochloride</ProprietaryName>
<NonProprietaryName>Melphalan Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20190610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209826</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<Status>Active</Status>
<LastUpdate>2019-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Melphalan hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.</IndicationAndUsage>
<Description>Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as melphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ∼2.5. Melphalan hydrochloride for Injection is supplied as a sterile, nonpyrogenic, white to off white lyophilized cake or powder. Each single-use vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone. Melphalan hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL. Melphalan hydrochloride for Injection is administered intravenously.</Description>
</NDC>
<NDC>
<NDCCode>68083-300-50</NDCCode>
<PackageDescription>50 VIAL, SINGLE-DOSE in 1 CARTON (68083-300-50) / 2 mL in 1 VIAL, SINGLE-DOSE (68083-300-01) </PackageDescription>
<NDC11Code>68083-0300-50</NDC11Code>
<ProductNDC>68083-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxercalciferol</ProprietaryName>
<NonProprietaryName>Doxercalciferol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190926</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210452</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>DOXERCALCIFEROL</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/2mL</StrengthUnit>
<Pharm_Classes>Ergocalciferols [CS], Vitamin D2 Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> Doxercalciferol Injection is indicated for the treatment of secondary hyperparathyroidism in adult patients with CKD on dialysis.</IndicationAndUsage>
<Description>Doxercalciferol Injection contains doxercalciferol, which is a synthetic vitamin D2 analog. Doxercalciferol undergoes metabolic activation in vivo to form 1α,25-dihydroxyvitamin D2 (1α,25-(OH)2D2), a naturally occurring, biologically active form of vitamin D2. Doxercalciferol is a colorless crystalline compound with a calculated molecular weight of 412.66 and a molecular formula of C28H44O2. It is soluble in oils and organic solvents, but is relatively insoluble in water. Chemically, doxercalciferol is (1α,3β,5Z,7E,22E)-9,10-secoergosta-5,7,10(19),22-tetraene-1,3-diol. The structural formula is. Doxercalciferol Injection 2 mL single-dose vials contain 4 mcg/2 mL (2 mcg/mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene (0.02 mg); disodium edetate (1.1 mg); ethanol (0.05 mL); polysorbate 20 (10 mg); sodium chloride (1.5 mg); sodium phosphate dibasic, heptahydrate (14.4 mg); and sodium phosphate monobasic, monohydrate (1.8 mg). Doxercalciferol Injection 2 mL multiple-dose vials contain 4 mcg/2 mL (2 mcg/mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene (0.02 mg); disodium edetate (1.1 mg); ethanol (0.075 mL); polysorbate 20 (10 mg); sodium chloride (1.5 mg); sodium phosphate dibasic, heptahydrate (14.4 mg); and sodium phosphate monobasic, monohydrate (1.8 mg).</Description>
</NDC>
<NDC>
<NDCCode>68083-359-50</NDCCode>
<PackageDescription>50 VIAL, MULTI-DOSE in 1 CARTON (68083-359-50) / 2 mL in 1 VIAL, MULTI-DOSE (68083-359-01) </PackageDescription>
<NDC11Code>68083-0359-50</NDC11Code>
<ProductNDC>68083-359</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxercalciferol</ProprietaryName>
<NonProprietaryName>Doxercalciferol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190926</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210452</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>DOXERCALCIFEROL</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/2mL</StrengthUnit>
<Pharm_Classes>Ergocalciferols [CS], Vitamin D2 Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> Doxercalciferol Injection is indicated for the treatment of secondary hyperparathyroidism in adult patients with CKD on dialysis.</IndicationAndUsage>
<Description>Doxercalciferol Injection contains doxercalciferol, which is a synthetic vitamin D2 analog. Doxercalciferol undergoes metabolic activation in vivo to form 1α,25-dihydroxyvitamin D2 (1α,25-(OH)2D2), a naturally occurring, biologically active form of vitamin D2. Doxercalciferol is a colorless crystalline compound with a calculated molecular weight of 412.66 and a molecular formula of C28H44O2. It is soluble in oils and organic solvents, but is relatively insoluble in water. Chemically, doxercalciferol is (1α,3β,5Z,7E,22E)-9,10-secoergosta-5,7,10(19),22-tetraene-1,3-diol. The structural formula is. Doxercalciferol Injection 2 mL single-dose vials contain 4 mcg/2 mL (2 mcg/mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene (0.02 mg); disodium edetate (1.1 mg); ethanol (0.05 mL); polysorbate 20 (10 mg); sodium chloride (1.5 mg); sodium phosphate dibasic, heptahydrate (14.4 mg); and sodium phosphate monobasic, monohydrate (1.8 mg). Doxercalciferol Injection 2 mL multiple-dose vials contain 4 mcg/2 mL (2 mcg/mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene (0.02 mg); disodium edetate (1.1 mg); ethanol (0.075 mL); polysorbate 20 (10 mg); sodium chloride (1.5 mg); sodium phosphate dibasic, heptahydrate (14.4 mg); and sodium phosphate monobasic, monohydrate (1.8 mg).</Description>
</NDC>
<NDC>
<NDCCode>68083-388-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (68083-388-01) / 25 mL in 1 VIAL</PackageDescription>
<NDC11Code>68083-0388-01</NDC11Code>
<ProductNDC>68083-388</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexrazoxane</ProprietaryName>
<NonProprietaryName>Dexrazoxane For Injection</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207321</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>DEXRAZOXANE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Cytoprotective Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexrazoxane for injection is indicated for reducing the incidence and severity of cardiomyopathy associated with doxorubicin administration in women with metastatic breast cancer who have received a cumulative doxorubicin dose of 300 mg/m2 and who will continue to receive doxorubicin therapy to maintain tumor control. Do not use with the initiation of doxorubicin therapy [see Warnings and Precautions (5.2)].</IndicationAndUsage>
<Description>Dexrazoxane for injection, a cardioprotective agent for use in conjunction with doxorubicin, is a sterile, pyrogen-free lyophilizate intended for intravenous administration. Chemically, dexrazoxane is (S)-4,4'-(1-methyl-1,2-ethanediyl)bis-2,6-piperazinedione. The structural formula is as follows. C11H16N4O4 M.W. 268.28 Dexrazoxane, an intracellular chelating agent, is a derivative of EDTA. Dexrazoxane is off white to light yellow colored powder that melts at 191° to 197°C. It is sparingly soluble in water and 0.1 N HCl, slightly soluble in ethanol and methanol, and practically insoluble in nonpolar organic solvents. The pKa is 2.1. Dexrazoxane has an octanol/water partition coefficient of 0.025 and degrades rapidly above a pH of 7.0.Each 250 mg vial contains dexrazoxane hydrochloride equivalent to 250 mg dexrazoxane. Hydrochloric Acid, NF is added for pH adjustment. When reconstituted as directed with 25 mL of Sterile Water for Injection, USP, each mL contains: 10 mg dexrazoxane. The pH of the resultant solution is 1.0 to 3.0.Each 500 mg vial contains dexrazoxane hydrochloride equivalent to 500 mg dexrazoxane. Hydrochloric Acid, NF is added for pH adjustment. When reconstituted as directed with 50 mL of Sterile Water for Injection, USP, each mL contains: 10 mg dexrazoxane. The pH of the resultant solution is 1.0 to 3.0. The reconstituted dexrazoxane for injection solutions prepared from Sterile Water for Injection, USP, are intended for further dilution with Lactated Ringer’s Injection, USP, for rapid intravenous drip infusion. DO NOT ADMINISTER VIA AN INTRAVENOUS PUSH [see Dosage and Administration (2.1, 2.3)].</Description>
</NDC>
<NDC>
<NDCCode>68083-398-85</NDCCode>
<PackageDescription>1000 BOTTLE, PLASTIC in 1 CASE (68083-398-85) / 2.5 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>68083-0398-85</NDC11Code>
<ProductNDC>68083-398</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Olopatadine Hydrochloride Ophthalmic</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<StartMarketingDate>20260106</StartMarketingDate>
<MarketingCategoryName>EXPORT ONLY</MarketingCategoryName>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-02-06</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>06-JAN-26</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>68083-399-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (68083-399-01) / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>68083-0399-01</NDC11Code>
<ProductNDC>68083-399</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Docetaxel</ProprietaryName>
<NonProprietaryName>Docetaxel</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213510</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
<Description>Docetaxel, USP is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white, crystalline powder with an empirical formula of C43H53NO14 and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous) USP, 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid, USP 23% v/v, dehydrated alcohol, USP and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
</NDC>
<NDC>
<NDCCode>68083-400-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (68083-400-01) / 8 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>68083-0400-01</NDC11Code>
<ProductNDC>68083-400</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Docetaxel</ProprietaryName>
<NonProprietaryName>Docetaxel</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213510</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
<Description>Docetaxel, USP is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white, crystalline powder with an empirical formula of C43H53NO14 and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous) USP, 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid, USP 23% v/v, dehydrated alcohol, USP and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
</NDC>
<NDC>
<NDCCode>68083-401-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (68083-401-01) / 16 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>68083-0401-01</NDC11Code>
<ProductNDC>68083-401</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Docetaxel</ProprietaryName>
<NonProprietaryName>Docetaxel</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213510</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
<Description>Docetaxel, USP is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white, crystalline powder with an empirical formula of C43H53NO14 and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous) USP, 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid, USP 23% v/v, dehydrated alcohol, USP and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
</NDC>
<NDC>
<NDCCode>68083-496-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (68083-496-10) > 4 mL in 1 VIAL, SINGLE-DOSE (68083-496-01) </PackageDescription>
<NDC11Code>68083-0496-10</NDC11Code>
<ProductNDC>68083-496</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216434</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium dihydrate 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula:. C17H20N2O5S Molecular weight: 364.42.</Description>
</NDC>
<NDC>
<NDCCode>68083-497-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (68083-497-10) > 10 mL in 1 VIAL, MULTI-DOSE (68083-497-01) </PackageDescription>
<NDC11Code>68083-0497-10</NDC11Code>
<ProductNDC>68083-497</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216434</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium dihydrate 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula:. C17H20N2O5S Molecular weight: 364.42.</Description>
</NDC>
<NDC>
<NDCCode>68083-553-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (68083-553-01) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>68083-0553-01</NDC11Code>
<ProductNDC>68083-553</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Angiotensin Ii</ProprietaryName>
<NonProprietaryName>Angiotensin Ii</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216966</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>ANGIOTENSIN II</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Vasoconstriction [PE], Vasoconstrictor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Angiotensin II Injection increases blood pressure in adults with septic or other distributive shock.</IndicationAndUsage>
<Description>Angiotensin II is a naturally occurring peptide hormone of the renin-angiotensin-aldosterone system (RAAS) that causes vasoconstriction and an increase in blood pressure. Angiotensin II Injection is a sterile, aqueous solution of synthetic human angiotensin II for intravenous administration by infusion. Each 1 mL of Angiotensin II Injection contains 2.5 mg angiotensin II equivalent to an average of 2.9 mg angiotensin II acetate, 25 mg mannitol, and Water for Injection adjusted with sodium hydroxide and/or hydrochloric acid to pH of 5.5.The chemical name of the synthetic angiotensin II acetate is L-Aspartyl-L-arginyl-L-valyl-L-tyrosyl-L-isoleucyl-L-histidyl-L-prolyl-L-phenylalanine, acetate salt. The counter ion acetate is present in a non-stoichiometric ratio. It is a white to off-white powder, soluble in water.The structure of angiotensin II acetate is shown below. Molecular formula: C50H71N13O12 (C2H4O2) n; (n= number of acetate molecules; theoretical n= 3)Average molecular weight: 1046.2 (as free base).</Description>
</NDC>
<NDC>
<NDCCode>68083-568-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (68083-568-01) / 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>68083-0568-01</NDC11Code>
<ProductNDC>68083-568</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Argatroban</ProprietaryName>
<NonProprietaryName>Argatroban</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217848</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>ARGATROBAN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/50mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Argatroban is a direct thrombin inhibitor indicated: For prophylaxis or treatment of thrombosis in adult patients with heparin-induced thrombocytopenia (HIT) (1.1) As an anticoagulant in adult patients with or at risk for HIT undergoing percutaneous coronary intervention (PCI) (1.2).</IndicationAndUsage>
<Description>Argatroban is a synthetic direct thrombin inhibitor and the chemical name is 1-[5-[(aminoiminomethyl)amino]-1-oxo-2-[[(1,2,3,4-tetrahydro-3-methyl-8-quinolinyl)sulfonyl]amino]pentyl]-4-methyl-2-piperidinecarboxylic acid, monohydrate. Argatroban has 4 asymmetric carbons. One of the asymmetric carbons has an R configuration (stereoisomer Type I) and an S configuration (stereoisomer Type II). Argatroban consists of a mixture of R and S stereoisomers at a ratio of approximately 65:35. The molecular formula of argatroban is C23H36N6O5SH2O. Its molecular weight is 526.66 g/mol. The structural formula is shown below. Argatroban is a white to off white crystalline powder that is freely soluble in acetic acid, sparingly soluble in methanol, slightly soluble in ethanol and very slightly soluble in water. Argatroban Injection, USP 50 mg/50 mL (1 mg/mL) is a sterile clear, colorless to pale yellow, solution. Argatroban Injection, USP 50 mg/50 mL (1 mg/mL) is available in 50-mg (in 50-mL) single-dose vials, with blue color matte top caps. Each mL of sterile, nonpyrogenic solution contains 1 mg Argatroban. Inert ingredients (per vial): 260 mg Propylene glycol, 152 mg Dehydrated alcohol, and 450 mg Sodium Chloride.</Description>
</NDC>
</NDCList>