{
"NDC": [
{
"NDCCode": "68083-411-10",
"PackageDescription": "10 CARTON in 1 CARTON (68083-411-10) > 1 BAG in 1 CARTON (68083-411-01) > 200 mL in 1 BAG",
"NDC11Code": "68083-0411-10",
"ProductNDC": "68083-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate In Dextrose",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213585",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200716",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone lactate is a member of a new class of bipyridine is inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is freely soluble in dimethyl sulfoxide, very slightly soluble in methanol, practically insoluble in water and in chloroform. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 to 4.0). The flexible container is manufactured from a specially designed multilayer plastic. Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution."
},
{
"NDCCode": "16571-411-10",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (16571-411-10) ",
"NDC11Code": "16571-0411-10",
"ProductNDC": "16571-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20040910",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076639",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040910",
"SamplePackage": "N",
"IndicationAndUsage": "Ciprofloxacin is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections (1.1), 2 Bone and Joint Infections (1.2), 3 Complicated Intra-Abdominal Infections (1.3), 4 Infectious Diarrhea (1.4), 5 Typhoid Fever (Enteric Fever) (1.5), 6 Uncomplicated Cervical and Urethral Gonorrhea (1.6), 7 Inhalational Anthrax post-exposure in adult and pediatric patients (1.7), 8 Plague in adult and pediatric patients (1.8), 9 Chronic Bacterial Prostatitis (1.9), 10 Lower Respiratory Tract Infections (1.10) o Acute Exacerbation of Chronic Bronchitis, 11 Urinary Tract Infections (1.11) o Urinary Tract Infections (UTI) o Acute Uncomplicated Cystitis o Complicated UTI and Pyelonephritis in Pediatric Patients, 12 Acute Sinusitis (1.12).",
"Description": "Ciprofloxacin (ciprofloxacin hydrochloride) tablets USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C17H18FN3O3 HCl H2O and its chemical structure is as follows. Ciprofloxacin film-coated tablets USP are available in 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Each ciprofloxacin film-coated tablet contains 250 mg (equivalent to 291 mg ciprofloxacin hydrochloride monohydrate), 500 mg of ciprofloxacin (equivalent to 582 mg ciprofloxacin hydrochloride monohydrate) or 750 mg of ciprofloxacin (equivalent to 873 mg ciprofloxacin hydrochloride monohydrate). Ciprofloxacin tablets USP are white film coated tablets. The inactive ingredients are colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch and titanium dioxide."
},
{
"NDCCode": "21695-411-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (21695-411-10)",
"NDC11Code": "21695-0411-10",
"ProductNDC": "21695-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofloxacin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20030819",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076794",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ciprofloxacin tablets, USP are indicated for the treatment of infections caused by susceptible strains of the designated microorganisms in the conditions and patient populations listed below. Please see DOSAGE AND ADMINISTRATION for specific recommendations. Adult Patients. Urinary Tract Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Serratia marcescens, Proteus mirabilis, Providencia rettgeri, Morganella morganii, Citrobacter diversus, Citrobacter freundii, Pseudomonas aeruginosa, methicillin-susceptible Staphylococcus epidermidis, Staphylococcus saprophyticus, or Enterococcus faecalis. Acute Uncomplicated Cystitis in females caused by Escherichia coli or Staphylococcus saprophyticus. Chronic Bacterial Prostatitis caused by Escherichia coli or Proteus mirabilis. Lower Respiratory Tract Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis, Pseudomonas aeruginosa, Haemophilus influenzae, Haemophilus parainfluenzae, or penicillin-susceptible Streptococcus pneumoniae. Also, Moraxella catarrhalis for the treatment of acute exacerbations of chronic bronchitis. NOTE: Although effective in clinical trials, ciprofloxacin is not a drug of first choice in the treatment of presumed or confirmed pneumonia secondary to Streptococcus pneumoniae. Acute Sinusitis caused by Haemophilus influenzae, penicillin-susceptible Streptococcus pneumoniae, or Moraxella catarrhalis. Skin and Skin Structure Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis, Proteus vulgaris, Providencia stuartii, Morganella morganii, Citrobacter freundii, Pseudomonas aeruginosa, methicillin-susceptible Staphylococcus aureus methicillin-susceptible Staphylococcus epidermidis, or Streptococcus pyogenes. Bone and Joint Infections caused by Enterobacter cloacae, Serratia marcescens, or Pseudomonas aeruginosa. Complicated Intra-Abdominal Infections (used in combination with metronidazole) caused by Escherichia coli, Pseudomonas aeruginosa, Proteus mirabilis, Klebsiella pneumoniae, or Bacteroides fragilis. Infectious Diarrhea caused by Escherichia coli (enterotoxigenic strains), Campylobacter jejuni, Shigella boydii†,Shigella dysenteriae, Shigella flexneri or Shigella sonnei† when antibacterial therapy is indicated. Typhoid Fever (Enteric Fever) caused by Salmonella typhi. NOTE: The efficacy of ciprofloxacin in the eradication of the chronic typhoid carrier state has not been demonstrated. Uncomplicated cervical and urethral gonorrhea due to Neisseria gonorrhoeae. Pediatric patients (1 to 17 years of age). Complicated Urinary Tract Infections and Pyelonephritis due to Escherichia coli. NOTE: Although effective in clinical trials, ciprofloxacin is not a drug of first choice in the pediatric population due to an increased incidence of adverse events compared to controls, including events related to joints and/or surrounding tissues. (See WARNINGS, PRECAUTIONS, Pediatric Use, ADVERSE REACTIONS and CLINICAL STUDIES .) Ciprofloxacin, like other fluoroquinolones, is associated with arthropathy and histopathological changes in weight-bearing joints of juvenile animals. (See ANIMAL PHARMACOLOGY .). Adult and Pediatric Patients. Inhalational anthrax (post-exposure): To reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. Ciprofloxacin serum concentrations achieved in humans served as a surrogate endpoint reasonably likely to predict clinical benefit and provided the initial basis for approval of this indication.5 Supportive clinical information for ciprofloxacin for anthrax post-exposure prophylaxis was obtained during the anthrax bioterror attacks of October 2001. (See also, INHALATIONAL ANTHRAX – ADDITIONAL INFORMATION)). †Although treatment of infections due to this organism in this organ system demonstrated a clinically significant outcome, efficacy was studied in fewer than 10 patients. If anaerobic organisms are suspected of contributing to the infection, appropriate therapy should be administered. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to ciprofloxacin. Therapy with ciprofloxacin tablets, USP may be initiated before results of these tests are known; once results become available appropriate therapy should be continued. As with other drugs, some strains of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with ciprofloxacin. Culture and susceptibility testing performed periodically during therapy will provide information not only on the therapeutic effect of the antimicrobial agent but also on the possible emergence of bacterial resistance. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ciprofloxacin tablets, USP and other antibacterial drugs, ciprofloxacin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ciprofloxacin tablets, USP is a synthetic broad spectrum antimicrobial agent for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C17H18FN3O3HClH2O and its chemical structure is as follows. Ciprofloxacin is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows. Ciprofloxacin film-coated tablets are available in 100 mg, 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin tablets USP are white to off-white. The inactive ingredients are cornstarch, microcrystalline cellulose, silicon dioxide, crospovidone, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, polyethylene glycol and purified water."
},
{
"NDCCode": "24208-411-10",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (24208-411-10) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "24208-0411-10",
"ProductNDC": "24208-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brimonidine Tartrate",
"NonProprietaryName": "Brimonidine Tartrate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20030528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076260",
"LabelerName": "Bausch & Lomb Incorporated",
"SubstanceName": "BRIMONIDINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-07-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20030528",
"SamplePackage": "N",
"IndicationAndUsage": "Brimonidine tartrate ophthalmic solution 0.2% is indicated for lowering intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension. The IOP lowering efficacy of brimonidine tartrate ophthalmic solution diminishes over time in some patients. This loss of effect appears with a variable time of onset in each patient and should be closely monitored.",
"Description": "Brimonidine tartrate ophthalmic solution 0.2%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (topical intraocular pressure lowering agent). The structural formula of brimonidine tartrate is. Chemical Name:5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate. In solution, brimonidine tartrate ophthalmic solution 0.2% has a clear, greenish-yellow color. It has an osmolality of 270 - 325 mOsml/kg and a pH range between 5.8 and 6.6. Each mL contains. ACTIVE: brimonidine tartrate: 0.2% (2 mg/mL). INACTIVES: citric acid, polyvinyl alcohol, purified water, sodium chloride, sodium citrate, hydrochloric acid and/or sodium hydroxide may be added to adjust pH. PRESERVATIVE ADDED: benzalkonium chloride 0.005% (0.05 mg/mL)."
},
{
"NDCCode": "25021-411-70",
"PackageDescription": "10 SYRINGE in 1 CARTON (25021-411-70) / .8 mL in 1 SYRINGE",
"NDC11Code": "25021-0411-70",
"ProductNDC": "25021-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20231001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078990",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2023-10-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231001",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .",
"Description": "Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg per mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg per mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "25021-411-71",
"PackageDescription": "10 SYRINGE in 1 CARTON (25021-411-71) / 1 mL in 1 SYRINGE",
"NDC11Code": "25021-0411-71",
"ProductNDC": "25021-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20231001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078990",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2023-10-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231001",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .",
"Description": "Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg per mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg per mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "29300-411-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (29300-411-10) ",
"NDC11Code": "29300-0411-10",
"ProductNDC": "29300-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213136",
"LabelerName": "Unichem Pharmaceuticals (USA), Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220826",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, USP a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are. C14H22N2O3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate."
},
{
"NDCCode": "42507-411-46",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (42507-411-46) > 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "42507-0411-46",
"ProductNDC": "42507-411",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cleartime",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150216",
"EndMarketingDate": "20190126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076301",
"LabelerName": "HyVee Inc",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-11-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150216",
"EndMarketingDatePackage": "20181121",
"SamplePackage": "N"
},
{
"NDCCode": "49643-411-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49643-411-10) ",
"NDC11Code": "49643-0411-10",
"ProductNDC": "49643-411",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Greasewood Pollen",
"NonProprietaryName": "Sarcobatus Vermiculatus",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "SARCOBATUS VERMICULATUS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "52584-411-11",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 BAG (52584-411-11) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "52584-0411-11",
"ProductNDC": "52584-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue-m 200",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20101105",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018735",
"LabelerName": "General Injectables & Vaccines, Inc.",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "408",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC],X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-01-20"
},
{
"NDCCode": "52959-411-10",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (52959-411-10)",
"NDC11Code": "52959-0411-10",
"ProductNDC": "52959-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benzonatate",
"NonProprietaryName": "Benzonatate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20070725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040627",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "BENZONATATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Tracheobronchial Stretch Receptor Activity [PE],Non-narcotic Antitussive [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Benzonatate is indicated for the symptomatic relief of cough."
},
{
"NDCCode": "55648-411-03",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (55648-411-03) > 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "55648-0411-03",
"ProductNDC": "55648-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Felodipine",
"NonProprietaryName": "Felodipine",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20101205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091484",
"LabelerName": "WOCKHARDT LIMITED",
"SubstanceName": "FELODIPINE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "57896-411-10",
"PackageDescription": "1000 CAPSULE, LIQUID FILLED in 1 BOTTLE (57896-411-10) ",
"NDC11Code": "57896-0411-10",
"ProductNDC": "57896-411",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Stool Softener",
"NonProprietaryName": "Docusate Sodium",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20240101",
"EndMarketingDate": "20261231",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M007",
"LabelerName": "Geri-Care Pharmaceutical Corp",
"SubstanceName": "DOCUSATE SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240101",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "relieves occasional constipation (irregularity)."
},
{
"NDCCode": "63323-411-10",
"PackageDescription": "10 VIAL in 1 TRAY (63323-411-10) / 10 mL in 1 VIAL (63323-411-13) ",
"NDC11Code": "63323-0411-10",
"ProductNDC": "63323-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20000714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075154",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000714",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam injection is indicated: : 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia; , 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants; , 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia); , 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .",
"Description": "Midazolam Injection, USP is a water-soluble benzodiazepine available as a sterile, non pyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 3 to 3.6 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)- 1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "63739-411-10",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-411-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63739-0411-10",
"ProductNDC": "63739-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078993",
"LabelerName": "Mckesson Corporation DBA SKY Packaginng",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20161229",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam is indicated for adjunctive therapy in the treatment of: : 1 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 2 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).",
"Description": "Levetiracetam is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), and 750 mg (orange) tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam USP is a white to off-white, crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.) Levetiracetam tablets USP contain the labeled amount of levetiracetam. Inactive ingredients: corn starch, colloidal silicon dioxide, povidone, talc, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and purified water. In addition 250 mg contains FD&C Blue #2/indigo carmine aluminum lake, 500 mg contains iron oxide yellow, and 750 mg contains FD&C Yellow #6/sunset yellow FCF aluminum lake, FD&C Blue #2/indigo carmine aluminum lake, and iron oxide red. Meets USP dissolution test 2."
},
{
"NDCCode": "64679-411-03",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-411-03) > 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "64679-0411-03",
"ProductNDC": "64679-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Felodipine",
"NonProprietaryName": "Felodipine",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20101205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091484",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "FELODIPINE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20101205",
"SamplePackage": "N",
"IndicationAndUsage": "Felodipine extended-release tablets are indicated for the treatment of hypertension. Felodipine extended-release tablets may be used alone or concomitantly with other antihypertensive agents.",
"Description": "Felodipine is a calcium antagonist (calcium channel blocker). Felodipine is a dihydropyridine derivative that is chemically described as ± ethyl methyl 4-(2,3-dichlorophenyl)-1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate. Its molecular formula is C 18H 19Cl 2NO 4 and its structural formula is:. Felodipine is light yellow to yellow crystalline powder with a molecular weight of 384.26. It is insoluble in water and is freely soluble in acetone and methanol, very slightly soluble in heptane. Felodipine is a racemic mixture. Felodipine extended-release tablets provide extended release of felodipine. They are available as tablets containing 2.5 mg, 5 mg, or 10 mg of felodipine for oral administration. In addition to the active ingredient felodipine, the tablets contain the following inactive ingredients:. Felodipine extended-release tablets, USP 2.5 mg - colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, lactose monohydrate, microcrystalline cellulose, polyoxyl 40 hydrogenated castor oil, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Felodipine extended-release tablets, USP 5 mg and 10 mg - colloidal silicon dioxide, FD&C yellow # 6, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, lactose monohydrate, microcrystalline cellulose, polyoxyl 40 hydrogenated castor oil, polyethylene glycol, D&C Yellow# 10 aluminium lake, sodium stearyl fumarate and titanium dioxide."
},
{
"NDCCode": "64980-411-01",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64980-411-01) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "64980-0411-01",
"ProductNDC": "64980-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210432",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for: 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white or almost white powder with a pKa1 of 4.4 and a pKa2 of 10.1. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (Octanol : Water) is – 1.0. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange & red capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide."
},
{
"NDCCode": "64980-411-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (64980-411-10) ",
"NDC11Code": "64980-0411-10",
"ProductNDC": "64980-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210432",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for: 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white or almost white powder with a pKa1 of 4.4 and a pKa2 of 10.1. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (Octanol : Water) is – 1.0. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange & red capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide."
},
{
"NDCCode": "68382-411-10",
"PackageDescription": "1000 CAPSULE, DELAYED RELEASE in 1 BOTTLE (68382-411-10) ",
"NDC11Code": "68382-0411-10",
"ProductNDC": "68382-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20121123",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091352",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121123",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole delayed-release capsules are proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1), 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2), 3 Treatment of active benign gastric ulcer in adults (1.3), 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4), 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 month of age and older (1.5), 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6), 7 Pathologic hypersecretory conditions in adults (1.7).",
"Description": "The active ingredient in omeprazole delayed-release capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Each omeprazole delayed-release capsule intended for oral administration contains 10 mg or 20 mg or 40 mg of omeprazole. In addition, each capsule contains the following inactive ingredients: acetone, di-sodium hydrogen phosphate dihydrate, FD&C blue 1, gelatin, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, polyethylene glycol, sodium lauryl sulphate, sugar spheres, talc, titanium dioxide and triethyl citrate. Additionally each 10 mg and 40 mg capsule shell contains FD&C red 3 and FD&C green 3; each 20 mg capsule shell contains iron oxide red and iron oxide yellow. The capsule is printed with black pharmaceutical ink which contains following ingredients: black iron oxide, potassium hydroxide, propylene glycol and shellac. Omeprazole Delayed-Release Capsules USP meet USP Dissolution Test 2."
},
{
"NDCCode": "70445-411-10",
"PackageDescription": "300 mL in 1 BOTTLE (70445-411-10) ",
"NDC11Code": "70445-0411-10",
"ProductNDC": "70445-411",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Antibacterial Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Webb Business Promotions, Incorporated",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "62",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20200330",
"SamplePackage": "N",
"IndicationAndUsage": "HAND SANITIZER TO HELP DECREASE BACTERIA ON THE SKIN. WHEN WATER, SOAP & TOWEL ARE NOT AVAILABLE. RECOMMENDED FOR REPEATED USE."
},
{
"NDCCode": "71288-411-81",
"PackageDescription": "10 SYRINGE in 1 CARTON (71288-411-81) / .8 mL in 1 SYRINGE (71288-411-80) ",
"NDC11Code": "71288-0411-81",
"ProductNDC": "71288-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20191201",
"EndMarketingDate": "20260331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206834",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20191201",
"EndMarketingDatePackage": "20260228",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4) .",
"Description": "Enoxaparin Sodium Injection, USP is an aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "71288-411-83",
"PackageDescription": "10 SYRINGE in 1 CARTON (71288-411-83) / 1 mL in 1 SYRINGE (71288-411-82) ",
"NDC11Code": "71288-0411-83",
"ProductNDC": "71288-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20191201",
"EndMarketingDate": "20260331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206834",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20191201",
"EndMarketingDatePackage": "20260331",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4) .",
"Description": "Enoxaparin Sodium Injection, USP is an aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "71919-411-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-411-10) ",
"NDC11Code": "71919-0411-10",
"ProductNDC": "71919-411",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Leonurus Cardiaca",
"NonProprietaryName": "Leonurus Cardiaca",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20100312",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "LEONURUS CARDIACA",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100312",
"SamplePackage": "N"
},
{
"NDCCode": "72485-411-10",
"PackageDescription": "10 VIAL in 1 CARTON (72485-411-10) / 20 mL in 1 VIAL",
"NDC11Code": "72485-0411-10",
"ProductNDC": "72485-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meropenem",
"NonProprietaryName": "Meropenem",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216154",
"LabelerName": "ARMAS PHARMACEUTICALS INC",
"SubstanceName": "MEROPENEM",
"StrengthNumber": "500",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230810",
"SamplePackage": "N",
"IndicationAndUsage": "Meropenem for injection, is a penem antibacterial indicated for the treatment of: Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) Complicated intra-abdominal infections (adult and pediatric patients). (1.2) Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) To reduce the development of drug-resistant bacteria and maintain the effectiveness of meropenem for injection and other antibacterial drugs, meropenem for injection should only be used to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.",
"Description": "Meropenem for Injection, USP is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6- [(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C 17H 25N 3O 5S3H 2O with a molecular weight of 437.52. Its structural formula is:. Meropenem for Injection, USP is a white to slight yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is freely soluble in N,N-dimethylformamide; soluble in 5% dibasic potassium phosphate solution; sparingly soluble in water and 5% monobasic potassium phosphate solution; practically insoluble in dichloromethane, 96% ethanol, acetone, anhydrous ethanol and anhydrous ether. When re-constituted as instructed, each 1 gram meropenem for injection, USP vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg meropenem for injection vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration (2.4)]."
},
{
"NDCCode": "75839-411-10",
"PackageDescription": "1 kg in 1 BOTTLE (75839-411-10)",
"NDC11Code": "75839-0411-10",
"ProductNDC": "75839-411",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Oxaceprol",
"DosageFormName": "POWDER",
"StartMarketingDate": "20130401",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Attix Pharmaceuticals",
"SubstanceName": "OXACEPROL",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "76357-411-10",
"PackageDescription": "1 KIT in 1 CELLO PACK (76357-411-10) * 138 mL in 1 BOTTLE, PLASTIC * 138 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "76357-0411-10",
"ProductNDC": "76357-411",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Smartmouth",
"ProprietaryNameSuffix": "Mouth Sore Zinc Activated Formula",
"NonProprietaryName": "Menthol, Unspecified Form",
"DosageFormName": "KIT",
"StartMarketingDate": "20220101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M022",
"LabelerName": "Triumph Pharmaceuticals Inc.",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "For the temporary relief of occasional minor irritation, pain, sore mouth, and sore throat. For the temporary relief of pain associated with: 1 Canker sores, 2 Minor dental procedures, 3 Minor irritation or injury of the mouth or gums, 4 Minor irritation of the mouth and gums caused by dentures or orthodontic appliances."
},
{
"NDCCode": "76381-411-11",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 PACKAGE (76381-411-11) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "76381-0411-11",
"ProductNDC": "76381-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue-m",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "19851231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018735",
"LabelerName": "BIPSO GmbH",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "408",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC],X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19851231",
"SamplePackage": "N"
},
{
"NDCCode": "76381-411-25",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 PACKAGE (76381-411-25) > 20 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "76381-0411-25",
"ProductNDC": "76381-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue-m",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "19851231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018735",
"LabelerName": "BIPSO GmbH",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "408",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC],X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19851231",
"SamplePackage": "N"
},
{
"NDCCode": "76420-411-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (76420-411-10) ",
"NDC11Code": "76420-0411-10",
"ProductNDC": "76420-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hydrochloride",
"NonProprietaryName": "Ondansetron Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078539",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250619",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C 18H 19N 3OHCl2H 2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6."
},
{
"NDCCode": "78756-411-10",
"PackageDescription": "1000 mL in 1 BOTTLE (78756-411-10) ",
"NDC11Code": "78756-0411-10",
"ProductNDC": "78756-411",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lrv Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "LEROLAV HEALTH LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200604",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68083-411-10</NDCCode>
<PackageDescription>10 CARTON in 1 CARTON (68083-411-10) > 1 BAG in 1 CARTON (68083-411-01) > 200 mL in 1 BAG</PackageDescription>
<NDC11Code>68083-0411-10</NDC11Code>
<ProductNDC>68083-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate In Dextrose</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213585</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone lactate is a member of a new class of bipyridine is inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is freely soluble in dimethyl sulfoxide, very slightly soluble in methanol, practically insoluble in water and in chloroform. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 to 4.0). The flexible container is manufactured from a specially designed multilayer plastic. Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution.</Description>
</NDC>
<NDC>
<NDCCode>16571-411-10</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (16571-411-10) </PackageDescription>
<NDC11Code>16571-0411-10</NDC11Code>
<ProductNDC>16571-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040910</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076639</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ciprofloxacin is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections (1.1), 2 Bone and Joint Infections (1.2), 3 Complicated Intra-Abdominal Infections (1.3), 4 Infectious Diarrhea (1.4), 5 Typhoid Fever (Enteric Fever) (1.5), 6 Uncomplicated Cervical and Urethral Gonorrhea (1.6), 7 Inhalational Anthrax post-exposure in adult and pediatric patients (1.7), 8 Plague in adult and pediatric patients (1.8), 9 Chronic Bacterial Prostatitis (1.9), 10 Lower Respiratory Tract Infections (1.10) o Acute Exacerbation of Chronic Bronchitis, 11 Urinary Tract Infections (1.11) o Urinary Tract Infections (UTI) o Acute Uncomplicated Cystitis o Complicated UTI and Pyelonephritis in Pediatric Patients, 12 Acute Sinusitis (1.12).</IndicationAndUsage>
<Description>Ciprofloxacin (ciprofloxacin hydrochloride) tablets USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C17H18FN3O3 HCl H2O and its chemical structure is as follows. Ciprofloxacin film-coated tablets USP are available in 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Each ciprofloxacin film-coated tablet contains 250 mg (equivalent to 291 mg ciprofloxacin hydrochloride monohydrate), 500 mg of ciprofloxacin (equivalent to 582 mg ciprofloxacin hydrochloride monohydrate) or 750 mg of ciprofloxacin (equivalent to 873 mg ciprofloxacin hydrochloride monohydrate). Ciprofloxacin tablets USP are white film coated tablets. The inactive ingredients are colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>21695-411-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (21695-411-10)</PackageDescription>
<NDC11Code>21695-0411-10</NDC11Code>
<ProductNDC>21695-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofloxacin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030819</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076794</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ciprofloxacin tablets, USP are indicated for the treatment of infections caused by susceptible strains of the designated microorganisms in the conditions and patient populations listed below. Please see DOSAGE AND ADMINISTRATION for specific recommendations. Adult Patients. Urinary Tract Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Serratia marcescens, Proteus mirabilis, Providencia rettgeri, Morganella morganii, Citrobacter diversus, Citrobacter freundii, Pseudomonas aeruginosa, methicillin-susceptible Staphylococcus epidermidis, Staphylococcus saprophyticus, or Enterococcus faecalis. Acute Uncomplicated Cystitis in females caused by Escherichia coli or Staphylococcus saprophyticus. Chronic Bacterial Prostatitis caused by Escherichia coli or Proteus mirabilis. Lower Respiratory Tract Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis, Pseudomonas aeruginosa, Haemophilus influenzae, Haemophilus parainfluenzae, or penicillin-susceptible Streptococcus pneumoniae. Also, Moraxella catarrhalis for the treatment of acute exacerbations of chronic bronchitis. NOTE: Although effective in clinical trials, ciprofloxacin is not a drug of first choice in the treatment of presumed or confirmed pneumonia secondary to Streptococcus pneumoniae. Acute Sinusitis caused by Haemophilus influenzae, penicillin-susceptible Streptococcus pneumoniae, or Moraxella catarrhalis. Skin and Skin Structure Infections caused by Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae, Proteus mirabilis, Proteus vulgaris, Providencia stuartii, Morganella morganii, Citrobacter freundii, Pseudomonas aeruginosa, methicillin-susceptible Staphylococcus aureus methicillin-susceptible Staphylococcus epidermidis, or Streptococcus pyogenes. Bone and Joint Infections caused by Enterobacter cloacae, Serratia marcescens, or Pseudomonas aeruginosa. Complicated Intra-Abdominal Infections (used in combination with metronidazole) caused by Escherichia coli, Pseudomonas aeruginosa, Proteus mirabilis, Klebsiella pneumoniae, or Bacteroides fragilis. Infectious Diarrhea caused by Escherichia coli (enterotoxigenic strains), Campylobacter jejuni, Shigella boydii†,Shigella dysenteriae, Shigella flexneri or Shigella sonnei† when antibacterial therapy is indicated. Typhoid Fever (Enteric Fever) caused by Salmonella typhi. NOTE: The efficacy of ciprofloxacin in the eradication of the chronic typhoid carrier state has not been demonstrated. Uncomplicated cervical and urethral gonorrhea due to Neisseria gonorrhoeae. Pediatric patients (1 to 17 years of age). Complicated Urinary Tract Infections and Pyelonephritis due to Escherichia coli. NOTE: Although effective in clinical trials, ciprofloxacin is not a drug of first choice in the pediatric population due to an increased incidence of adverse events compared to controls, including events related to joints and/or surrounding tissues. (See WARNINGS, PRECAUTIONS, Pediatric Use, ADVERSE REACTIONS and CLINICAL STUDIES .) Ciprofloxacin, like other fluoroquinolones, is associated with arthropathy and histopathological changes in weight-bearing joints of juvenile animals. (See ANIMAL PHARMACOLOGY .). Adult and Pediatric Patients. Inhalational anthrax (post-exposure): To reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. Ciprofloxacin serum concentrations achieved in humans served as a surrogate endpoint reasonably likely to predict clinical benefit and provided the initial basis for approval of this indication.5 Supportive clinical information for ciprofloxacin for anthrax post-exposure prophylaxis was obtained during the anthrax bioterror attacks of October 2001. (See also, INHALATIONAL ANTHRAX – ADDITIONAL INFORMATION)). †Although treatment of infections due to this organism in this organ system demonstrated a clinically significant outcome, efficacy was studied in fewer than 10 patients. If anaerobic organisms are suspected of contributing to the infection, appropriate therapy should be administered. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to ciprofloxacin. Therapy with ciprofloxacin tablets, USP may be initiated before results of these tests are known; once results become available appropriate therapy should be continued. As with other drugs, some strains of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with ciprofloxacin. Culture and susceptibility testing performed periodically during therapy will provide information not only on the therapeutic effect of the antimicrobial agent but also on the possible emergence of bacterial resistance. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ciprofloxacin tablets, USP and other antibacterial drugs, ciprofloxacin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ciprofloxacin tablets, USP is a synthetic broad spectrum antimicrobial agent for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C17H18FN3O3HClH2O and its chemical structure is as follows. Ciprofloxacin is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows. Ciprofloxacin film-coated tablets are available in 100 mg, 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin tablets USP are white to off-white. The inactive ingredients are cornstarch, microcrystalline cellulose, silicon dioxide, crospovidone, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, polyethylene glycol and purified water.</Description>
</NDC>
<NDC>
<NDCCode>24208-411-10</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (24208-411-10) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>24208-0411-10</NDC11Code>
<ProductNDC>24208-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brimonidine Tartrate</ProprietaryName>
<NonProprietaryName>Brimonidine Tartrate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20030528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076260</ApplicationNumber>
<LabelerName>Bausch & Lomb Incorporated</LabelerName>
<SubstanceName>BRIMONIDINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brimonidine tartrate ophthalmic solution 0.2% is indicated for lowering intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension. The IOP lowering efficacy of brimonidine tartrate ophthalmic solution diminishes over time in some patients. This loss of effect appears with a variable time of onset in each patient and should be closely monitored.</IndicationAndUsage>
<Description>Brimonidine tartrate ophthalmic solution 0.2%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (topical intraocular pressure lowering agent). The structural formula of brimonidine tartrate is. Chemical Name:5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate. In solution, brimonidine tartrate ophthalmic solution 0.2% has a clear, greenish-yellow color. It has an osmolality of 270 - 325 mOsml/kg and a pH range between 5.8 and 6.6. Each mL contains. ACTIVE: brimonidine tartrate: 0.2% (2 mg/mL). INACTIVES: citric acid, polyvinyl alcohol, purified water, sodium chloride, sodium citrate, hydrochloric acid and/or sodium hydroxide may be added to adjust pH. PRESERVATIVE ADDED: benzalkonium chloride 0.005% (0.05 mg/mL).</Description>
</NDC>
<NDC>
<NDCCode>25021-411-70</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (25021-411-70) / .8 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>25021-0411-70</NDC11Code>
<ProductNDC>25021-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20231001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078990</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .</IndicationAndUsage>
<Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg per mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg per mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>25021-411-71</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (25021-411-71) / 1 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>25021-0411-71</NDC11Code>
<ProductNDC>25021-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20231001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078990</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .</IndicationAndUsage>
<Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg per mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg per mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>29300-411-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (29300-411-10) </PackageDescription>
<NDC11Code>29300-0411-10</NDC11Code>
<ProductNDC>29300-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213136</ApplicationNumber>
<LabelerName>Unichem Pharmaceuticals (USA), Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, USP a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are. C14H22N2O3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>42507-411-46</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (42507-411-46) > 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>42507-0411-46</NDC11Code>
<ProductNDC>42507-411</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cleartime</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150216</StartMarketingDate>
<EndMarketingDate>20190126</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076301</ApplicationNumber>
<LabelerName>HyVee Inc</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-11-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150216</StartMarketingDatePackage>
<EndMarketingDatePackage>20181121</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49643-411-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49643-411-10) </PackageDescription>
<NDC11Code>49643-0411-10</NDC11Code>
<ProductNDC>49643-411</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Greasewood Pollen</ProprietaryName>
<NonProprietaryName>Sarcobatus Vermiculatus</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>SARCOBATUS VERMICULATUS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>52584-411-11</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 BAG (52584-411-11) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>52584-0411-11</NDC11Code>
<ProductNDC>52584-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue-m 200</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20101105</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018735</ApplicationNumber>
<LabelerName>General Injectables & Vaccines, Inc.</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>408</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC],X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-20</LastUpdate>
</NDC>
<NDC>
<NDCCode>52959-411-10</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (52959-411-10)</PackageDescription>
<NDC11Code>52959-0411-10</NDC11Code>
<ProductNDC>52959-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benzonatate</ProprietaryName>
<NonProprietaryName>Benzonatate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040627</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>BENZONATATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Tracheobronchial Stretch Receptor Activity [PE],Non-narcotic Antitussive [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Benzonatate is indicated for the symptomatic relief of cough.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55648-411-03</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (55648-411-03) > 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55648-0411-03</NDC11Code>
<ProductNDC>55648-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Felodipine</ProprietaryName>
<NonProprietaryName>Felodipine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091484</ApplicationNumber>
<LabelerName>WOCKHARDT LIMITED</LabelerName>
<SubstanceName>FELODIPINE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>57896-411-10</NDCCode>
<PackageDescription>1000 CAPSULE, LIQUID FILLED in 1 BOTTLE (57896-411-10) </PackageDescription>
<NDC11Code>57896-0411-10</NDC11Code>
<ProductNDC>57896-411</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Stool Softener</ProprietaryName>
<NonProprietaryName>Docusate Sodium</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240101</StartMarketingDate>
<EndMarketingDate>20261231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M007</ApplicationNumber>
<LabelerName>Geri-Care Pharmaceutical Corp</LabelerName>
<SubstanceName>DOCUSATE SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves occasional constipation (irregularity).</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63323-411-10</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-411-10) / 10 mL in 1 VIAL (63323-411-13) </PackageDescription>
<NDC11Code>63323-0411-10</NDC11Code>
<ProductNDC>63323-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20000714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075154</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000714</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam injection is indicated: : 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia; , 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants; , 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia); , 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .</IndicationAndUsage>
<Description>Midazolam Injection, USP is a water-soluble benzodiazepine available as a sterile, non pyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 3 to 3.6 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)- 1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>63739-411-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-411-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63739-0411-10</NDC11Code>
<ProductNDC>63739-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078993</ApplicationNumber>
<LabelerName>Mckesson Corporation DBA SKY Packaginng</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161229</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam is indicated for adjunctive therapy in the treatment of: : 1 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 2 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).</IndicationAndUsage>
<Description>Levetiracetam is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), and 750 mg (orange) tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam USP is a white to off-white, crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.) Levetiracetam tablets USP contain the labeled amount of levetiracetam. Inactive ingredients: corn starch, colloidal silicon dioxide, povidone, talc, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and purified water. In addition 250 mg contains FD&C Blue #2/indigo carmine aluminum lake, 500 mg contains iron oxide yellow, and 750 mg contains FD&C Yellow #6/sunset yellow FCF aluminum lake, FD&C Blue #2/indigo carmine aluminum lake, and iron oxide red. Meets USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-411-03</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-411-03) > 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0411-03</NDC11Code>
<ProductNDC>64679-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Felodipine</ProprietaryName>
<NonProprietaryName>Felodipine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091484</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>FELODIPINE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Felodipine extended-release tablets are indicated for the treatment of hypertension. Felodipine extended-release tablets may be used alone or concomitantly with other antihypertensive agents.</IndicationAndUsage>
<Description>Felodipine is a calcium antagonist (calcium channel blocker). Felodipine is a dihydropyridine derivative that is chemically described as ± ethyl methyl 4-(2,3-dichlorophenyl)-1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate. Its molecular formula is C 18H 19Cl 2NO 4 and its structural formula is:. Felodipine is light yellow to yellow crystalline powder with a molecular weight of 384.26. It is insoluble in water and is freely soluble in acetone and methanol, very slightly soluble in heptane. Felodipine is a racemic mixture. Felodipine extended-release tablets provide extended release of felodipine. They are available as tablets containing 2.5 mg, 5 mg, or 10 mg of felodipine for oral administration. In addition to the active ingredient felodipine, the tablets contain the following inactive ingredients:. Felodipine extended-release tablets, USP 2.5 mg - colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, lactose monohydrate, microcrystalline cellulose, polyoxyl 40 hydrogenated castor oil, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Felodipine extended-release tablets, USP 5 mg and 10 mg - colloidal silicon dioxide, FD&C yellow # 6, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, lactose monohydrate, microcrystalline cellulose, polyoxyl 40 hydrogenated castor oil, polyethylene glycol, D&C Yellow# 10 aluminium lake, sodium stearyl fumarate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>64980-411-01</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64980-411-01) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64980-0411-01</NDC11Code>
<ProductNDC>64980-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210432</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for: 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white or almost white powder with a pKa1 of 4.4 and a pKa2 of 10.1. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (Octanol : Water) is – 1.0. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange & red capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>64980-411-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (64980-411-10) </PackageDescription>
<NDC11Code>64980-0411-10</NDC11Code>
<ProductNDC>64980-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210432</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for: 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white or almost white powder with a pKa1 of 4.4 and a pKa2 of 10.1. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (Octanol : Water) is – 1.0. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange & red capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>68382-411-10</NDCCode>
<PackageDescription>1000 CAPSULE, DELAYED RELEASE in 1 BOTTLE (68382-411-10) </PackageDescription>
<NDC11Code>68382-0411-10</NDC11Code>
<ProductNDC>68382-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121123</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091352</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole delayed-release capsules are proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1), 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2), 3 Treatment of active benign gastric ulcer in adults (1.3), 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4), 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 month of age and older (1.5), 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6), 7 Pathologic hypersecretory conditions in adults (1.7).</IndicationAndUsage>
<Description>The active ingredient in omeprazole delayed-release capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Each omeprazole delayed-release capsule intended for oral administration contains 10 mg or 20 mg or 40 mg of omeprazole. In addition, each capsule contains the following inactive ingredients: acetone, di-sodium hydrogen phosphate dihydrate, FD&C blue 1, gelatin, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, polyethylene glycol, sodium lauryl sulphate, sugar spheres, talc, titanium dioxide and triethyl citrate. Additionally each 10 mg and 40 mg capsule shell contains FD&C red 3 and FD&C green 3; each 20 mg capsule shell contains iron oxide red and iron oxide yellow. The capsule is printed with black pharmaceutical ink which contains following ingredients: black iron oxide, potassium hydroxide, propylene glycol and shellac. Omeprazole Delayed-Release Capsules USP meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>70445-411-10</NDCCode>
<PackageDescription>300 mL in 1 BOTTLE (70445-411-10) </PackageDescription>
<NDC11Code>70445-0411-10</NDC11Code>
<ProductNDC>70445-411</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Antibacterial Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Webb Business Promotions, Incorporated</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>62</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HAND SANITIZER TO HELP DECREASE BACTERIA ON THE SKIN. WHEN WATER, SOAP & TOWEL ARE NOT AVAILABLE. RECOMMENDED FOR REPEATED USE.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71288-411-81</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (71288-411-81) / .8 mL in 1 SYRINGE (71288-411-80) </PackageDescription>
<NDC11Code>71288-0411-81</NDC11Code>
<ProductNDC>71288-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20191201</StartMarketingDate>
<EndMarketingDate>20260331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206834</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20191201</StartMarketingDatePackage>
<EndMarketingDatePackage>20260228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4) .</IndicationAndUsage>
<Description>Enoxaparin Sodium Injection, USP is an aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>71288-411-83</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (71288-411-83) / 1 mL in 1 SYRINGE (71288-411-82) </PackageDescription>
<NDC11Code>71288-0411-83</NDC11Code>
<ProductNDC>71288-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20191201</StartMarketingDate>
<EndMarketingDate>20260331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206834</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20191201</StartMarketingDatePackage>
<EndMarketingDatePackage>20260331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4) .</IndicationAndUsage>
<Description>Enoxaparin Sodium Injection, USP is an aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>71919-411-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-411-10) </PackageDescription>
<NDC11Code>71919-0411-10</NDC11Code>
<ProductNDC>71919-411</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Leonurus Cardiaca</ProprietaryName>
<NonProprietaryName>Leonurus Cardiaca</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100312</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>LEONURUS CARDIACA</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72485-411-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (72485-411-10) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>72485-0411-10</NDC11Code>
<ProductNDC>72485-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meropenem</ProprietaryName>
<NonProprietaryName>Meropenem</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216154</ApplicationNumber>
<LabelerName>ARMAS PHARMACEUTICALS INC</LabelerName>
<SubstanceName>MEROPENEM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230810</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meropenem for injection, is a penem antibacterial indicated for the treatment of: Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1) Complicated intra-abdominal infections (adult and pediatric patients). (1.2) Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3) To reduce the development of drug-resistant bacteria and maintain the effectiveness of meropenem for injection and other antibacterial drugs, meropenem for injection should only be used to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.</IndicationAndUsage>
<Description>Meropenem for Injection, USP is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6- [(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C 17H 25N 3O 5S3H 2O with a molecular weight of 437.52. Its structural formula is:. Meropenem for Injection, USP is a white to slight yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is freely soluble in N,N-dimethylformamide; soluble in 5% dibasic potassium phosphate solution; sparingly soluble in water and 5% monobasic potassium phosphate solution; practically insoluble in dichloromethane, 96% ethanol, acetone, anhydrous ethanol and anhydrous ether. When re-constituted as instructed, each 1 gram meropenem for injection, USP vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg meropenem for injection vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration (2.4)].</Description>
</NDC>
<NDC>
<NDCCode>75839-411-10</NDCCode>
<PackageDescription>1 kg in 1 BOTTLE (75839-411-10)</PackageDescription>
<NDC11Code>75839-0411-10</NDC11Code>
<ProductNDC>75839-411</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Oxaceprol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20130401</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Attix Pharmaceuticals</LabelerName>
<SubstanceName>OXACEPROL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>76357-411-10</NDCCode>
<PackageDescription>1 KIT in 1 CELLO PACK (76357-411-10) * 138 mL in 1 BOTTLE, PLASTIC * 138 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>76357-0411-10</NDC11Code>
<ProductNDC>76357-411</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Smartmouth</ProprietaryName>
<ProprietaryNameSuffix>Mouth Sore Zinc Activated Formula</ProprietaryNameSuffix>
<NonProprietaryName>Menthol, Unspecified Form</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20220101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M022</ApplicationNumber>
<LabelerName>Triumph Pharmaceuticals Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the temporary relief of occasional minor irritation, pain, sore mouth, and sore throat. For the temporary relief of pain associated with: 1 Canker sores, 2 Minor dental procedures, 3 Minor irritation or injury of the mouth or gums, 4 Minor irritation of the mouth and gums caused by dentures or orthodontic appliances.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>76381-411-11</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 PACKAGE (76381-411-11) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>76381-0411-11</NDC11Code>
<ProductNDC>76381-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue-m</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>19851231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018735</ApplicationNumber>
<LabelerName>BIPSO GmbH</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>408</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC],X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>76381-411-25</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 PACKAGE (76381-411-25) > 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>76381-0411-25</NDC11Code>
<ProductNDC>76381-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue-m</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>19851231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018735</ApplicationNumber>
<LabelerName>BIPSO GmbH</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>408</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC],X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>76420-411-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (76420-411-10) </PackageDescription>
<NDC11Code>76420-0411-10</NDC11Code>
<ProductNDC>76420-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Ondansetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078539</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C 18H 19N 3OHCl2H 2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6.</Description>
</NDC>
<NDC>
<NDCCode>78756-411-10</NDCCode>
<PackageDescription>1000 mL in 1 BOTTLE (78756-411-10) </PackageDescription>
<NDC11Code>78756-0411-10</NDC11Code>
<ProductNDC>78756-411</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lrv Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>LEROLAV HEALTH LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200604</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
</NDC>
</NDCList>