RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>68083-586-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (68083-586-10)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>68083-0586-10</NDC11Code>
    <ProductNDC>68083-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Isoproterenol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Isoproterenol Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20241003</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217648</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>ISOPROTERENOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241003</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Isoproterenol hydrochloride injection is indicated:  To improve hemodynamic status in patients in distributive shock and shock due to reduced cardiac output  For bronchospasm occurring during anesthesia.</IndicationAndUsage>
    <Description>Isoproterenol hydrochloride is 3,4-Dihydroxy-α-[(isopropylamino)methyl] benzyl alcohol hydrochloride, a synthetic sympathomimetic amine that is structurally related to epinephrine but acts almost exclusively on beta receptors. The molecular formula is C11H17NO3  HCl. It has a molecular weight of 247.72 and the following structural formula. Isoproterenol hydrochloride is a racemic compound. Each milliliter of the sterile solution contains. Isoproterenol hydrochloride                                                                                      0.2 mg. Edetate Disodium Dihydrate (EDTA)                                                                        0.22 mg. Sodium Citrate, Dihydrate                                                                                        2.07 mg. Citric Acid, Anhydrous                                                                                              2.5 mg. Sodium Chloride                                                                                                      7 mg. Water for Injection                                                                                                   qs to 1 mL. The pH is adjusted between 3.5 and 4.5 with hydrochloric acid or sodium hydroxide. The sterile solution is nonpyrogenic and can be administered by the intravenous route.</Description>
  </NDC>
  <NDC>
    <NDCCode>10135-586-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (10135-586-10)</PackageDescription>
    <NDC11Code>10135-0586-10</NDC11Code>
    <ProductNDC>10135-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Loxapine</ProprietaryName>
    <NonProprietaryName>Loxapine Succinate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141001</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090695</ApplicationNumber>
    <LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
    <SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Loxapine Capsules, USP are indicated for the treatment of schizophrenia. The efficacy of loxapine in schizophrenia was established in clinical studies which enrolled newly hospitalized and chronically hospitalized acutely ill schizophrenic patients as subjects. CONTRAINDICATIONS. Loxapine is contraindicated in comatose or severe drug-induced depressed states (alcohol, barbiturates, narcotics, etc.). Loxapine is contraindicated in individuals with known hypersensitivity to dibenzoxazepines.</IndicationAndUsage>
    <Description>Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[b,f][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8, 13.6, 34.0 or 68.1 mg equivalent to 5, 10, 25, or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, gelatin, magnesium stearate, polacrilin potassium, sodium lauryl sulfate, talc, titanium dioxide, D&amp;C Yellow #10 and FD&amp;C Blue#1.  Additionally, the 5 mg capsule contains D&amp;C Red #33, the 10 mg capsule contains D&amp;C Red #33 and D&amp;C Red #28, and the 25 mg capsule contains FD&amp;C Yellow #6. In addition, the black imprinting ink contains shellac glace in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, FD&amp;C Blue #2/indigo carmine aluminum lake, FD&amp;C Red #40/Allurea Red AC aluminum lake, FD&amp;C Blue #1/brilliant Blue FCF aluminum lake, D&amp;C Yellow #10 aluminum lake, SDA 3A alcohol, and methanol. The white imprinting ink contains pharmaceutical glaze in SD-45, titanium dioxide, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol and simethicone.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-586-32</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (31722-586-32)  / 10 TABLET in 1 BLISTER PACK (31722-586-31) </PackageDescription>
    <NDC11Code>31722-0586-32</NDC11Code>
    <ProductNDC>31722-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nebivolol</ProprietaryName>
    <NonProprietaryName>Nebivolol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210917</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203825</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>NEBIVOLOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210917</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nebivolol tablet is a beta-adrenergic blocking agent indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1).</IndicationAndUsage>
    <Description>The chemical name for the active ingredient in nebivolol tablets is (αR,α’R,2R,2’S)-rel-α,α’-[Iminobis(methylene)]bis[6-fluoro-3,4-dihydro-2H-1-benzopyran-2-methanol] hydrochloride. Nebivolol is a racemate composed of d-Nebivolol and l-Nebivolol with the stereochemical designations of [SRRR]-nebivolol and [RSSS]-nebivolol, respectively. Nebivolol’s molecular formula is (C 22H 25F 2NO 4HCl) with the following structural formula:. Molecular Weight: 441.9 g/mol Nebivolol hydrochloride is a white to off-white crystalline powder that is sparingly soluble in dimethylformamide, slightly soluble in methanol, very slightly soluble in water and practically insoluble in 0.1M hydrochloric acid. Nebivolol as tablets for oral administration contains nebivolol hydrochloride equivalent to 2.5, 5, 10, and 20 mg of nebivolol base. In addition, nebivolol tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&amp;C Red No.27 AL Lake, FD &amp; C Yellow No.6 AL, hypromellose, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
  </NDC>
  <NDC>
    <NDCCode>33342-586-10</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (33342-586-10) </PackageDescription>
    <NDC11Code>33342-0586-10</NDC11Code>
    <ProductNDC>33342-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dapagliflozin</ProprietaryName>
    <NonProprietaryName>Dapagliflozin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260406</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211506</ApplicationNumber>
    <LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
    <SubstanceName>DAPAGLIFLOZIN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260406</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dapagliflozin is indicated. To reduce the risk of hospitalization for heart failure in adults with type 2 diabetes mellitus and either established CV disease or multiple. CV risk factors.  As an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Limitations of Use  Dapagliflozin is not recommended for use to improve glycemic control in patients with type 1 diabetes mellitus [see Warnings and Precautions (5.1)].  Dapagliflozin is not recommended for use to improve glycemic control in patients with type 2 diabetes mellitus with an eGFR less than 45 mL/min/1.73 m2. Dapagliflozin is likely to be ineffective in this setting based upon its mechanism of action. Pediatric use information is approved for AstraZeneca AB’s Farxiga® (dapagliflozin) Tablets. However, due to AstraZeneca AB’s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
    <Description>Dapagliflozin USP, an inhibitor of SGLT2, is described chemically as (2S,3R,4R,5S,6R)-2-(4-Chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the molecular weight is 408.87. The structural formula is. Dapagliflozin USP, is available as a film-coated tablet for oral administration containing 5 mg dapagliflozin USP or 10 mg dapagliflozin USP and the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose, silicon dioxide, sodium lauryl sulfate. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide and yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>33342-586-56</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (33342-586-56)  / 14 TABLET in 1 BLISTER PACK (33342-586-66) </PackageDescription>
    <NDC11Code>33342-0586-56</NDC11Code>
    <ProductNDC>33342-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dapagliflozin</ProprietaryName>
    <NonProprietaryName>Dapagliflozin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260406</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211506</ApplicationNumber>
    <LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
    <SubstanceName>DAPAGLIFLOZIN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260406</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dapagliflozin is indicated. To reduce the risk of hospitalization for heart failure in adults with type 2 diabetes mellitus and either established CV disease or multiple. CV risk factors.  As an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Limitations of Use  Dapagliflozin is not recommended for use to improve glycemic control in patients with type 1 diabetes mellitus [see Warnings and Precautions (5.1)].  Dapagliflozin is not recommended for use to improve glycemic control in patients with type 2 diabetes mellitus with an eGFR less than 45 mL/min/1.73 m2. Dapagliflozin is likely to be ineffective in this setting based upon its mechanism of action. Pediatric use information is approved for AstraZeneca AB’s Farxiga® (dapagliflozin) Tablets. However, due to AstraZeneca AB’s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
    <Description>Dapagliflozin USP, an inhibitor of SGLT2, is described chemically as (2S,3R,4R,5S,6R)-2-(4-Chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the molecular weight is 408.87. The structural formula is. Dapagliflozin USP, is available as a film-coated tablet for oral administration containing 5 mg dapagliflozin USP or 10 mg dapagliflozin USP and the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose, silicon dioxide, sodium lauryl sulfate. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide and yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>43598-586-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (43598-586-10) </PackageDescription>
    <NDC11Code>43598-0586-10</NDC11Code>
    <ProductNDC>43598-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ezetimibe And Simvastatin</ProprietaryName>
    <NonProprietaryName>Ezetimibe And Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170426</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200909</ApplicationNumber>
    <LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
    <SubstanceName>EZETIMIBE; SIMVASTATIN</SubstanceName>
    <StrengthNumber>10; 80</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Cholesterol Absorption [PE],Dietary Cholesterol Absorption Inhibitor [EPC],HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170426</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>52989-586-10</NDCCode>
    <PackageDescription>10 mL in 1 BOTTLE (52989-586-10) </PackageDescription>
    <NDC11Code>52989-0586-10</NDC11Code>
    <ProductNDC>52989-586</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Hand Sanitizer</ProprietaryName>
    <NonProprietaryName>Hand Sanitizer</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200528</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>Taizhou Yadai Daily-Use Co., Ltd</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2021-07-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200528</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>58411-586-10</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (58411-586-10)  / 30 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>58411-0586-10</NDC11Code>
    <ProductNDC>58411-586</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Shiseido Synchro Skin Radiant Lifting Foundation</ProprietaryName>
    <ProprietaryNameSuffix>460</ProprietaryNameSuffix>
    <NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200920</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M020</ApplicationNumber>
    <LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
    <SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
    <StrengthNumber>2.484; .36</StrengthNumber>
    <StrengthUnit>g/30mL; g/30mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-01-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200920</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>63323-586-65</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (63323-586-65)  / 1 SYRINGE in 1 BLISTER PACK (63323-586-63)  / 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>63323-0586-65</NDC11Code>
    <ProductNDC>63323-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190423</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078990</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190423</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .</IndicationAndUsage>
    <Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-586-96</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (63323-586-96)  / 1 SYRINGE in 1 BLISTER PACK (63323-586-21)  / 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>63323-0586-96</NDC11Code>
    <ProductNDC>63323-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190423</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078990</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190423</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .</IndicationAndUsage>
    <Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>68084-586-01</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (68084-586-01)  &gt; 10 TABLET in 1 BLISTER PACK (68084-586-11)</PackageDescription>
    <NDC11Code>68084-0586-01</NDC11Code>
    <ProductNDC>68084-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methocarbamol</ProprietaryName>
    <NonProprietaryName>Methocarbamol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130506</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA085123</ApplicationNumber>
    <LabelerName>American Health Packaging</LabelerName>
    <SubstanceName>METHOCARBAMOL</SubstanceName>
    <StrengthNumber>750</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2015-12-25</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>69292-586-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (69292-586-10) </PackageDescription>
    <NDC11Code>69292-0586-10</NDC11Code>
    <ProductNDC>69292-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Haloperidol</ProprietaryName>
    <NonProprietaryName>Haloperidol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220418</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA071173</ApplicationNumber>
    <LabelerName>Amici Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>HALOPERIDOL</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-05-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220418</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
    <Description>Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake.The 5 mg and 10 mg tablets contain FD&amp;C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&amp;C Red No. 40 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>71919-586-10</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-586-10) </PackageDescription>
    <NDC11Code>71919-0586-10</NDC11Code>
    <ProductNDC>71919-586</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Ricinus Communis</ProprietaryName>
    <NonProprietaryName>Ricinus Communis Seed</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110211</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Washington Homeopathic Products</LabelerName>
    <SubstanceName>RICINUS COMMUNIS SEED</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[hp_C]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-03-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110211</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>73502-586-10</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (73502-586-10) </PackageDescription>
    <NDC11Code>73502-0586-10</NDC11Code>
    <ProductNDC>73502-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Soaanz</ProprietaryName>
    <NonProprietaryName>Torsemide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220124</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213218</ApplicationNumber>
    <LabelerName>Sarfez Pharmaceuticals Inc</LabelerName>
    <SubstanceName>TORSEMIDE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>76420-586-10</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (76420-586-10) </PackageDescription>
    <NDC11Code>76420-0586-10</NDC11Code>
    <ProductNDC>76420-586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205019</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2023-09-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phentermine hydrochloride capsules are indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m 2, or ≥ 27 kg/m 2in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. BODY MASS INDEX (BMI), kg/m2. The limited usefulness of agents of this class, including phentermine, [se eCLINICAL PHARMACOLOGY( 12.1,12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
    <Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α, dimethylphenethylamine hydrochloride. The structural formula is as follows. C 10H 15NHCl                                   M.W. 185.7. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride capsule USP is available as an oral capsule containing 15 mg or 30 mg of phentermine hydrochloride (equivalent to 12 mg or 24 mg of phentermine base). a) powder-filled capsules containing 15 mg phentermine hydrochloride (equivalent to 12 mg phentermine) or 30 mg phentermine hydrochloride (equivalent to 24 mg phentermine) and inactive ingredients: colloidal silicon dioxide, corn starch, gelatin, lactose monohydrate, magnesium stearate. In addition, the 15 mg capsules contain black iron oxide, FD&amp;C red No. 3, FD&amp;C yellow No. 5, titanium dioxide; and the blue and clear 30 mg capsules contain D&amp;C red No. 28, FD&amp;C blue No. 1. The ingredients in the black imprinting ink are shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution, potassium hydroxide and black iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-101-01</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (68083-101-01)  &gt; 2 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>68083-0101-01</NDC11Code>
    <ProductNDC>68083-101</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Adenosine</ProprietaryName>
    <NonProprietaryName>Adenosine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20130401</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077283</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>ADENOSINE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2017-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Adenosine Injection, USP is indicated for the following: Conversion to sinus rhythm of paroxysmal supraventricular tachycardia (PSVT), including that associated with accessory bypass tracts (Wolff-Parkinson-White Syndrome). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver), should be attempted prior to adenosine administration. It is important to be sure the adenosine solution actually reaches the systemic circulation (see DOSAGE AND ADMINISTRATION).Adenosine does not convert atrial flutter, atrial fibrillation, or ventricular tachycardia to normal sinus rhythm. In the presence of atrial flutter or atrial fibrillation, a transient modest slowing of ventricular response may occur immediately following adenosine administration.</IndicationAndUsage>
    <Description>Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula:. Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP.  The pH of the solution is between 4.5 and 7.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-101-02</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (68083-101-02)  &gt; 4 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>68083-0101-02</NDC11Code>
    <ProductNDC>68083-101</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Adenosine</ProprietaryName>
    <NonProprietaryName>Adenosine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20130401</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077283</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>ADENOSINE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2017-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Adenosine Injection, USP is indicated for the following: Conversion to sinus rhythm of paroxysmal supraventricular tachycardia (PSVT), including that associated with accessory bypass tracts (Wolff-Parkinson-White Syndrome). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver), should be attempted prior to adenosine administration. It is important to be sure the adenosine solution actually reaches the systemic circulation (see DOSAGE AND ADMINISTRATION).Adenosine does not convert atrial flutter, atrial fibrillation, or ventricular tachycardia to normal sinus rhythm. In the presence of atrial flutter or atrial fibrillation, a transient modest slowing of ventricular response may occur immediately following adenosine administration.</IndicationAndUsage>
    <Description>Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula:. Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP.  The pH of the solution is between 4.5 and 7.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-103-01</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (68083-103-01)  &gt; 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>68083-0103-01</NDC11Code>
    <ProductNDC>68083-103</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
    <NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20150724</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076722</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-07</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Carefully consider the potential benefits and risks ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary.The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.Ketorolac tromethamine injection has been used concomitantly with morphine and meperidine and has shown an opioid-sparing effect. For breakthrough pain, it is recommended to supplement the lower end of the ketorolac tromethamine injection dosage range with low doses of narcotics prn, unless otherwise contraindicated. Ketorolac tromethamine injection and narcotics should not be administered in the same syringe (see DOSAGE AND ADMINISTRATION -Pharmaceutical Information for Ketorolac TromethamineInjection).</IndicationAndUsage>
    <Description>Ketorolac tromethamine injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2- (hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1.FIGURE 1Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40.Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration  as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg and 8.70 mg respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-104-01</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (68083-104-01)  &gt; 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>68083-0104-01</NDC11Code>
    <ProductNDC>68083-104</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
    <NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20150724</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076722</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-07</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Carefully consider the potential benefits and risks ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary.The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.Ketorolac tromethamine injection has been used concomitantly with morphine and meperidine and has shown an opioid-sparing effect. For breakthrough pain, it is recommended to supplement the lower end of the ketorolac tromethamine injection dosage range with low doses of narcotics prn, unless otherwise contraindicated. Ketorolac tromethamine injection and narcotics should not be administered in the same syringe (see DOSAGE AND ADMINISTRATION -Pharmaceutical Information for Ketorolac TromethamineInjection).</IndicationAndUsage>
    <Description>Ketorolac tromethamine injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2- (hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1.FIGURE 1Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40.Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration  as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg and 8.70 mg respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-104-02</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (68083-104-02)  &gt; 2 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>68083-0104-02</NDC11Code>
    <ProductNDC>68083-104</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
    <NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20150724</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076722</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-07</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Carefully consider the potential benefits and risks ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary.The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.Ketorolac tromethamine injection has been used concomitantly with morphine and meperidine and has shown an opioid-sparing effect. For breakthrough pain, it is recommended to supplement the lower end of the ketorolac tromethamine injection dosage range with low doses of narcotics prn, unless otherwise contraindicated. Ketorolac tromethamine injection and narcotics should not be administered in the same syringe (see DOSAGE AND ADMINISTRATION -Pharmaceutical Information for Ketorolac TromethamineInjection).</IndicationAndUsage>
    <Description>Ketorolac tromethamine injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2- (hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1.FIGURE 1Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40.Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration  as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg and 8.70 mg respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-106-01</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (68083-106-01)  &gt; 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>68083-0106-01</NDC11Code>
    <ProductNDC>68083-106</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
    <NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20120601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090696</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2022-11-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Midazolam Injection is indicated:  intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;   intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;   intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);   continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
    <Description>Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium; the pH is adjusted to 2.9 to 3.5 with hydrochloric acid and, if necessary, sodium hydroxide.   Midazolam is a white or yellowish crystalline powder, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-108-01</NDCCode>
    <PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (68083-108-01)  / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>68083-0108-01</NDC11Code>
    <ProductNDC>68083-108</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
    <NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20120601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090850</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2023-10-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Midazolam Injection is indicated:  intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;   intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;   intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);   continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
    <Description>Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 2.9 to 3.5 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white or yellowish crystalline powder, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula: Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-108-02</NDCCode>
    <PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (68083-108-02)  / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>68083-0108-02</NDC11Code>
    <ProductNDC>68083-108</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
    <NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20120601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090850</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2023-10-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Midazolam Injection is indicated:  intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;   intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;   intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);   continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
    <Description>Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 2.9 to 3.5 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white or yellowish crystalline powder, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula: Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-111-01</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 CARTON (68083-111-01)  / 20 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>68083-0111-01</NDC11Code>
    <ProductNDC>68083-111</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20120419</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090699</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120419</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Labetalol hydrochloride injection is indicated for control of blood pressure in severe hypertension.</IndicationAndUsage>
    <Description>Labetalol hydrochloride injection is an adrenergic receptor blocking agent that has both selective alpha1adrenergic and nonselective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl) is a racemate chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl)amino]ethyl]benzamide monohydrochloride, and it has the following structure.   Labetalol HCl has the empirical formula C19H24N2O3HCl and a molecular weight of 364.9. It has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl is a white or off-white crystalline powder, soluble in water. Labetalol hydrochloride injection is a clear, colorless to light yellow, aqueous, sterile, isotonic solution for intravenous (IV) injection. It has a pH range of 3.0 to 4.5. Each mL contains 5 mg labetalol hydrochloride USP, 45 mg anhydrous dextrose, 0.10 mg edetate disodium; 0.80 mg of methylparaben and 0.10 mg of propylparaben as preservatives; and citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-111-02</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 CARTON (68083-111-02)  / 40 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>68083-0111-02</NDC11Code>
    <ProductNDC>68083-111</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20120419</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090699</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120419</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Labetalol hydrochloride injection is indicated for control of blood pressure in severe hypertension.</IndicationAndUsage>
    <Description>Labetalol hydrochloride injection is an adrenergic receptor blocking agent that has both selective alpha1adrenergic and nonselective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl) is a racemate chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl)amino]ethyl]benzamide monohydrochloride, and it has the following structure.   Labetalol HCl has the empirical formula C19H24N2O3HCl and a molecular weight of 364.9. It has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl is a white or off-white crystalline powder, soluble in water. Labetalol hydrochloride injection is a clear, colorless to light yellow, aqueous, sterile, isotonic solution for intravenous (IV) injection. It has a pH range of 3.0 to 4.5. Each mL contains 5 mg labetalol hydrochloride USP, 45 mg anhydrous dextrose, 0.10 mg edetate disodium; 0.80 mg of methylparaben and 0.10 mg of propylparaben as preservatives; and citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-112-01</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (68083-112-01)  &gt; 3 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>68083-0112-01</NDC11Code>
    <ProductNDC>68083-112</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20130715</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077161</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-08-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130715</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.</IndicationAndUsage>
    <Description>Amiodarone Hydrochloride Injection, USP contains amiodarone HCl (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone HCl is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone HCl has the following structural formula. Amiodarone HCl is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection, USP is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone HCl, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection, USP contains polysorbate 80, which is known to leach di-(2- ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-117-01</NDCCode>
    <PackageDescription>10 SYRINGE in 1 BOX (68083-117-01)  &gt; 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>68083-0117-01</NDC11Code>
    <ProductNDC>68083-117</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Haloperidol</ProprietaryName>
    <NonProprietaryName>Haloperidol</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20160104</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076774</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>HALOPERIDOL LACTATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Haloperidol is indicated for the treatment of patients with schizophrenia.</IndicationAndUsage>
    <Description>Haloperidol is the first of the butyrophenone series of major antipsychotics. The chemical designation is 4-[4-(p-chlorophenyl)-4-hydroxypiperidino]-4’-fluorobutyrophenone and it has the following structural formula. Haloperidol Injection USP is available as a sterile parenteral form for intramuscular injection.  Each mL of Haloperidol Injection USP contains 5 mg haloperidol (as the lactate), Water for Injection USP q.s. and lactic acid USP for pH adjustment between 3.0 to 3.6.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-131-01</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 CARTON (68083-131-01)  &gt; 5 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>68083-0131-01</NDC11Code>
    <ProductNDC>68083-131</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metoprolol Tartrate</ProprietaryName>
    <NonProprietaryName>Metoprolol Tartrate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20141006</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204205</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>METOPROLOL TARTRATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-10-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141006</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Metoprolol tartrate injection is indicated in the treatment of definite or suspected acute myocardial infarction in hemodynamically stable patients to reduce cardiovascular mortality when used in conjunction with oral metoprolol maintenance therapy.</IndicationAndUsage>
    <Description>Metoprolol tartrate USP, is a selective beta1-adrenoreceptor blocking agent, available in 5 mL vials for intravenous administration. Each vial contains a sterile solution of metoprolol tartrate USP, 5 mg, and sodium chloride USP, 45 mg, and water for injection USP. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol L- (+)-tartrate (2:1) salt, and its structural formula is. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-132-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (68083-132-10)  / 1 mL in 1 VIAL (68083-132-01) </PackageDescription>
    <NDC11Code>68083-0132-10</NDC11Code>
    <ProductNDC>68083-132</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
    <NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20161201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204216</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20161201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary.The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
    <Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1.  FIGURE 1. C15H13NO3  C4H11NO3Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40.Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70  mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-133-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (68083-133-10)  / 1 mL in 1 VIAL (68083-133-01) </PackageDescription>
    <NDC11Code>68083-0133-10</NDC11Code>
    <ProductNDC>68083-133</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
    <NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20161201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204216</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20161201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary.The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
    <Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1.  FIGURE 1. C15H13NO3  C4H11NO3Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40.Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70  mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color.</Description>
  </NDC>
</NDCList>