{
"NDC": [
{
"NDCCode": "68258-7150-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (68258-7150-9)",
"NDC11Code": "68258-7150-09",
"ProductNDC": "68258-7150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078722",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain,tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks)because adequate evidence of effectiveness for more prolonged use is not available and because musclespasm associated with acute, painful musculoskeletal conditions is generally of short duration and specifictherapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticityassociated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217° C, and a pKa of 8.47 at 25° C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride and insoluble in hydrocarbons. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d] cyclohepten-5- ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:Cyclobenzaprine hydrochloride tablets, USP are supplied as 7.5 mg tablets for oral administration. Cyclobenzaprine hydrochloride 7.5 mg tablets contain the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch, talc and titanium dioxide."
},
{
"NDCCode": "68788-7150-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (68788-7150-9) ",
"NDC11Code": "68788-7150-09",
"ProductNDC": "68788-7150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208963",
"LabelerName": "Preferred Pharmaceuticals Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-04-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180509",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole tablets are indicated for the treatment of: : 1 1.Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 2.Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 3.Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.",
"Description": "Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. Fluconazole tablet meets USP Dissolution Test 2."
},
{
"NDCCode": "50268-718-13",
"PackageDescription": "30 BLISTER PACK in 1 BOX (50268-718-13) / 1 TABLET in 1 BLISTER PACK (50268-718-11) ",
"NDC11Code": "50268-0718-13",
"ProductNDC": "50268-718",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sirolimus",
"NonProprietaryName": "Sirolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180423",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201578",
"LabelerName": "AvPAK",
"SubstanceName": "SIROLIMUS",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180423",
"SamplePackage": "N",
"Description": "Sirolimus is an immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C 51H 79NO 13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide."
},
{
"NDCCode": "55111-653-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (55111-653-01) ",
"NDC11Code": "55111-0653-01",
"ProductNDC": "55111-653",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sirolimus",
"NonProprietaryName": "Sirolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141027",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201578",
"LabelerName": "Dr. Reddy's Laboratories Limited",
"SubstanceName": "SIROLIMUS",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141027",
"SamplePackage": "N",
"Description": "Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C51H79NO13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide."
},
{
"NDCCode": "55111-653-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (55111-653-30) ",
"NDC11Code": "55111-0653-30",
"ProductNDC": "55111-653",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sirolimus",
"NonProprietaryName": "Sirolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141027",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201578",
"LabelerName": "Dr. Reddy's Laboratories Limited",
"SubstanceName": "SIROLIMUS",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141027",
"SamplePackage": "N",
"Description": "Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C51H79NO13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide."
},
{
"NDCCode": "55111-654-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (55111-654-01) ",
"NDC11Code": "55111-0654-01",
"ProductNDC": "55111-654",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sirolimus",
"NonProprietaryName": "Sirolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141027",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201578",
"LabelerName": "Dr. Reddy's Laboratories Limited",
"SubstanceName": "SIROLIMUS",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141027",
"SamplePackage": "N",
"Description": "Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C51H79NO13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide."
},
{
"NDCCode": "55111-654-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (55111-654-30) ",
"NDC11Code": "55111-0654-30",
"ProductNDC": "55111-654",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sirolimus",
"NonProprietaryName": "Sirolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141027",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201578",
"LabelerName": "Dr. Reddy's Laboratories Limited",
"SubstanceName": "SIROLIMUS",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141027",
"SamplePackage": "N",
"Description": "Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C51H79NO13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide."
},
{
"NDCCode": "68084-915-25",
"PackageDescription": "30 BLISTER PACK in 1 BOX, UNIT-DOSE (68084-915-25) / 1 TABLET in 1 BLISTER PACK (68084-915-95) ",
"NDC11Code": "68084-0915-25",
"ProductNDC": "68084-915",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sirolimus",
"NonProprietaryName": "Sirolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201578",
"LabelerName": "American Health Packaging",
"SubstanceName": "SIROLIMUS",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151105",
"SamplePackage": "N",
"IndicationAndUsage": "Sirolimus is an mTOR inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in patients aged ≥13 years receiving renal transplants:. Patients at low-to moderate-immunologic risk: Use initially with cyclosporine (CsA) and corticosteroids. CsA withdrawal is recommended 2 to 4 months after transplantation (1.1). . Patients at high-immunologic risk: Use in combination with CsA and corticosteroids for the first 12 months following transplantation (1.1). Safety and efficacy of CsA withdrawal has not been established in high risk patients (1.1, 1.2, 14.3). . Sirolimus is an mTOR inhibitor indicated for the treatment of patients with lymphangioleiomyomatosis (1.3). .",
"Description": "Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)‑9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2‑ [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26‑ hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C 51H 79NO 13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide."
},
{
"NDCCode": "70518-3795-0",
"PackageDescription": "100 POUCH in 1 BOX (70518-3795-0) / 1 TABLET in 1 POUCH (70518-3795-1) ",
"NDC11Code": "70518-3795-00",
"ProductNDC": "70518-3795",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sirolimus",
"NonProprietaryName": "Sirolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201578",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "SIROLIMUS",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230717",
"SamplePackage": "N",
"Description": "Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C 51H 79NO 13and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide."
},
{
"NDCCode": "71872-7150-1",
"PackageDescription": "1 VIAL in 1 BAG (71872-7150-1) / 2 mL in 1 VIAL",
"NDC11Code": "71872-7150-01",
"ProductNDC": "71872-7150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine",
"NonProprietaryName": "Dexmedetomidine",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209065",
"LabelerName": "Medical Purchasing Solutions, LLC.",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-06-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190108",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmedetomidine Injection is a relatively selective alpha 2-adrenergic agonist indicated for: : 1 Sedation of non-intubated patients prior to and/or during surgical and other procedures. ( 1.2) .",
"Description": "Dexmedetomidine Injection, USP is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2HCl and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride equivalent to 100 mcg (0.1 mg) of dexmedetomidine and 9 mg of sodium chloride in water and is to be used after dilution. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "68258-1104-9",
"PackageDescription": "9 TABLET, FILM COATED in 1 PACKAGE (68258-1104-9)",
"NDC11Code": "68258-1104-09",
"ProductNDC": "68258-1104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atovaquone And Proguanil Hydrochloride",
"NonProprietaryName": "Atovaquone And Proguanil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110818",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091211",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "ATOVAQUONE; PROGUANIL HYDROCHLORIDE",
"StrengthNumber": "250; 100",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Antimalarial [EPC],Antiprotozoal [EPC],Antimalarial [EPC],Dihydrofolate Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Atovaquone and proguanil hydrochloride tablets are indicated for the prophylaxis of P. falciparum malaria, including in areas where chloroquine resistance has been reported (see CLINICAL STUDIES).",
"Description": "Atovaquone and proguanil hydrochloride is a fixed-dose combination of the antimalarial agents atovaquone and proguanil hydrochloride. The chemical name of atovaquone is trans-2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-1,4-naphthalenedione. Atovaquone is a yellow crystalline solid that is practically insoluble in water. It has a molecular weight of 366.84 and the molecular formula C22H19ClO3. The compound has the following structural formula:. The chemical name of proguanil hydrochloride USP is 1-(4-chlorophenyl)-5-isopropyl-biguanide hydrochloride. Proguanil hydrochloride USP is a white crystalline solid that is sparingly soluble in water. It has a molecular weight of 290.22 and the molecular formula C11H16ClN5HCl. The compound has the following structural formula:. Atovaquone and proguanil hydrochloride tablets are for oral administration. Each atovaquone and proguanil hydrochloride tablet contains 250 mg of atovaquone and 100 mg of proguanil hydrochloride USP. The inactive ingredients in the tablet are colloidal silicon dioxide, ferric oxide red, hypromellose 2910, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, poloxamer 188, povidone K30, polyethylene glycol 400, polyethylene glycol 8000, sodium starch glycolate, titanium dioxide."
},
{
"NDCCode": "68258-2012-9",
"PackageDescription": "90 CAPSULE in 1 BOTTLE, PLASTIC (68258-2012-9)",
"NDC11Code": "68258-2012-09",
"ProductNDC": "68258-2012",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butalbital, Acetaminophen, Caffeine And Codeine Phosphate",
"NonProprietaryName": "Butalbital, Acetaminophen, Caffeine And Codeine Phosphate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20040701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076560",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "BUTALBITAL; ACETAMINOPHEN; CAFFEINE; CODEINE PHOSPHATE",
"StrengthNumber": "50; 325; 40; 30",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Pharm_Classes": "Barbiturates [CS],Barbiturate [EPC],Central Nervous System Stimulant [EPC],Methylxanthine [EPC],Xanthines [CS],Central Nervous System Stimulation [PE]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because codeine and butalbital are habit-forming and potentially abusable.",
"Description": "Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate is supplied in capsule form for oral administration. Each capsule contains the following active ingredients. Codeine phosphate [7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, C18H24N07P, anhydrous mw 397.37], is a narcotic analgesic and antitussive. The structural formula of codeine phosphate is. Butalbital (5-allyl-5-isobutylbarbituric acid, C11H16N203, mw 224.26), is a short-to intermediate- acting barbiturate. The structural formula of butalbital is. Caffeine (1,3,7-trimethylxanthine, C8H10N4O2, mw 194.19), is a central nervous system stimulant. The structural formula of caffeine is. Acetaminophen (4'-hydroxyacetanilide, C8H9NO2, mw 151.16), is a non-opiate, non-salicylate analgesic and antipyretic. The structural formula of acetaminophen is. Active Ingredients: Codeine Phosphate, USP, Butalbital, USP, Caffeine, USP, and Acetaminophen, USP. Inactive Ingredients: FD&C Blue No. 1, FD&C Red No. 3, FD&C Red No. 40, *FD&C Yellow No.5 (see PRECAUTIONS), Gelatin, Microcrystalline Cellulose, Sodium Lauryl Sulfate, Stearic Acid, Talc, Titanium Dioxide."
},
{
"NDCCode": "68258-2997-9",
"PackageDescription": "120 mL in 1 BOTTLE (68258-2997-9)",
"NDC11Code": "68258-2997-09",
"ProductNDC": "68258-2997",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dendracin Neurodendraxcin",
"NonProprietaryName": "Methyl Salicylate, Menthol And Capsaicin",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110722",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "METHYL SALICYLATE; MENTHOL; CAPSAICIN",
"StrengthNumber": "30; 10; .025",
"StrengthUnit": "g/60mL; g/60mL; g/60mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For temporary relief of mild pain due to muscular strain, arthritis, and simple back pain. Does not cure any disease."
},
{
"NDCCode": "68258-3008-1",
"PackageDescription": "9 TABLET, FILM COATED in 1 BLISTER PACK (68258-3008-1)",
"NDC11Code": "68258-3008-01",
"ProductNDC": "68258-3008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sumatriptan Succinate",
"NonProprietaryName": "Sumatriptan Succinate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090303",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020132",
"LabelerName": "Dispensing Solutions Inc.",
"SubstanceName": "SUMATRIPTAN SUCCINATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1d Receptor Agonists [MoA],Serotonin-1b and Serotonin-1d Receptor Agonist [EPC],Serotonin 1b Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Sumatriptan Succinate Tablets are indicated for the acute treatment of migraine attacks with or without aura in adults. Sumatriptan Succinate Tablets are not intended for the prophylactic therapy of migraine or for use in the management of hemiplegic or basilar migraine (see CONTRAINDICATIONS). Safety and effectiveness of Sumatriptan Succinate Tablets have not been established for cluster headache, which is present in an older, predominantly male population.",
"Description": "Sumatriptan Succinate Tablets contain sumatriptan (as the succinate), a selective 5-hydroxytryptamine1 receptor subtype agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure. The empirical formula is C14H21N3O2SC4H6O4, representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Each Sumatriptan Succinate Tablet for oral administration contains 35, 70, or 140 mg of sumatriptan succinate equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, and sodium bicarbonate."
},
{
"NDCCode": "68258-3009-1",
"PackageDescription": "9 TABLET, FILM COATED in 1 BLISTER PACK (68258-3009-1)",
"NDC11Code": "68258-3009-01",
"ProductNDC": "68258-3009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sumatriptan Succinate",
"NonProprietaryName": "Sumatriptan Succinate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090303",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020132",
"LabelerName": "Dispensing Solutions Inc.",
"SubstanceName": "SUMATRIPTAN SUCCINATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1d Receptor Agonists [MoA],Serotonin-1b and Serotonin-1d Receptor Agonist [EPC],Serotonin 1b Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Sumatriptan Succinate Tablets are indicated for the acute treatment of migraine attacks with or without aura in adults. Sumatriptan Succinate Tablets are not intended for the prophylactic therapy of migraine or for use in the management of hemiplegic or basilar migraine (see CONTRAINDICATIONS). Safety and effectiveness of Sumatriptan Succinate Tablets have not been established for cluster headache, which is present in an older, predominantly male population.",
"Description": "Sumatriptan Succinate Tablets contain sumatriptan (as the succinate), a selective 5-hydroxytryptamine1 receptor subtype agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure. The empirical formula is C14H21N3O2SC4H6O4, representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Each Sumatriptan Succinate Tablet for oral administration contains 35, 70, or 140 mg of sumatriptan succinate equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, and sodium bicarbonate."
},
{
"NDCCode": "68258-3035-1",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (68258-3035-1) > 9 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "68258-3035-01",
"ProductNDC": "68258-3035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mucinex D",
"NonProprietaryName": "Guaifenesin And Pseudoephedrine Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20080208",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021585",
"LabelerName": "Dispensing Solutions Inc.",
"SubstanceName": "GUAIFENESIN; PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "600; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA],alpha-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive. temporarily relieves nasal congestion due to: common coldhay feverupper respiratory allergies. temporarily restores freer breathing through the nose. promotes nasal and/or sinus drainage. temporarily relieves sinus congestion and pressure."
},
{
"NDCCode": "68258-5948-9",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (68258-5948-9)",
"NDC11Code": "68258-5948-09",
"ProductNDC": "68258-5948",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Synthroid",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020724",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021402",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "LEVOTHYROXINE",
"StrengthNumber": "50",
"StrengthUnit": "ug/1",
"Pharm_Classes": "l-Thyroxine [EPC],Thyroxine [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Levothyroxine sodium is used for the following indications.",
"Description": "SYNTHROID (levothyroxine sodium tablets, USP) contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown."
},
{
"NDCCode": "68258-5972-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (68258-5972-9)",
"NDC11Code": "68258-5972-09",
"ProductNDC": "68258-5972",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Synthroid",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020724",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021402",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "88",
"StrengthUnit": "ug/1",
"Pharm_Classes": "l-Thyroxine [EPC],Thyroxine [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Levothyroxine sodium is used for the following indications.",
"Description": "SYNTHROID (levothyroxine sodium tablets, USP) contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown."
},
{
"NDCCode": "68258-5973-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (68258-5973-9)",
"NDC11Code": "68258-5973-09",
"ProductNDC": "68258-5973",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Synthroid",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020724",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021402",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "75",
"StrengthUnit": "ug/1",
"Pharm_Classes": "l-Thyroxine [EPC],Thyroxine [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Levothyroxine sodium is used for the following indications.",
"Description": "SYNTHROID (levothyroxine sodium tablets, USP) contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown."
},
{
"NDCCode": "68258-5974-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (68258-5974-9)",
"NDC11Code": "68258-5974-09",
"ProductNDC": "68258-5974",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Synthroid",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020724",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021402",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "ug/1",
"Pharm_Classes": "l-Thyroxine [EPC],Thyroxine [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Levothyroxine sodium is used for the following indications.",
"Description": "SYNTHROID (levothyroxine sodium tablets, USP) contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown."
},
{
"NDCCode": "68258-6010-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (68258-6010-9)",
"NDC11Code": "68258-6010-09",
"ProductNDC": "68258-6010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20081013",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078955",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "hydrochloride(Propranolol is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It’s molecular and structural formulae are. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80.Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration.The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain and C yellow No.6 Aluminium Lake and Color D and C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD and C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D and C Red No. 30 Lake."
},
{
"NDCCode": "68258-6019-9",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (68258-6019-9)",
"NDC11Code": "68258-6019-09",
"ProductNDC": "68258-6019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076862",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Metoprolol succinate is a beta1-selective adrenoceptor blocking agent. Metoprolol succinate extended-release tablets USP are indicated for the treatment of: : 1 Hypertension (1.1) , 2 Angina Pectoris (1.2) , 3 Heart Failure - for the treatment of stable, symptomatic (NYHA Class II or III) heart failure of ischemic, hypertensive, or cardiomyopathic origin.(1.3).",
"Description": "Metoprolol succinate is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended release tablets. Metoprolol succinate extended-release tablets USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: cellulose acetate butyrate, corn starch, crospovidone, glyceryl monostearate, hypromellose, methacrylic acid copolymer, microcrystalline cellulose, poloxamer 188, polyethylene glycol, polysorbate 80, sucrose, and titanium dioxide. USP Dissolution test is pending."
},
{
"NDCCode": "68258-6023-9",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (68258-6023-9)",
"NDC11Code": "68258-6023-09",
"ProductNDC": "68258-6023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ramipril",
"NonProprietaryName": "Ramipril",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20080618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077900",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "RAMIPRIL",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ramipril Capsules USP are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics (1.1).",
"Description": "Ramipril is a 2azabicyclo [3.3.0]octane3carboxylic acid derivative. It is a white, crystalline substance soluble in polar organic solvents and buffered aqueous solutions. Ramipril melts between 105°C to 112°C. Ramipril's chemical name is (2S,3aS,6aS)1-[(S)N[(S)1-Carboxy3phenylpropyl] alanyl] octahydrocyclopenta [b]pyrrole2carboxylic acid, 1ethyl ester. The inactive ingredients present are pregelatinized starch, gelatin, and titanium dioxide. In addition to the ingredients listed above, the 1.25 mg capsule shell contains D&C yellow #10 and FD&C yellow #6, the 2.5 mg capsule shell contains FD&C yellow #6, the 5 mg capsule shell contains D&C red #28, FD&C blue #1 and FD&C yellow #6, and the 10 mg capsule shell contains D&C red #28 and FD&C blue #1. The ink contains ethanol, FD&C blue #2, FD&C red #40, FD&C yellow#6, iron oxide black, n-butyl alcohol, propylene glycol, and shellac glaze. The structural formula for ramipril is. Its molecular formula is C23H32N2O5, and its molecular weight is 416.51. Ramiprilat, the diacid metabolite of ramipril, is a nonsulfhydryl ACE inhibitor. Ramipril is converted to ramiprilat by hepatic cleavage of the ester group."
},
{
"NDCCode": "68258-6024-9",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (68258-6024-9)",
"NDC11Code": "68258-6024-09",
"ProductNDC": "68258-6024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19991220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074984",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Calcium Channel Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Diltiazem hydrochloride extended-release capsules, USP are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive medications. Diltiazem hydrochloride extended-release capsules, USP are indicated for the management of chronic stable angina and angina due to coronary artery spasm.",
"Description": "Diltiazem hydrochloride, USP is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-benzothiazepin-4(5H)one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2,3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride,(+)-cis-. The chemical structure is. Diltiazem hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. It has a molecular weight of 450.98. Diltiazem hydrochloride, USP is formulated as a once-a-day extended release capsule containing either 120 mg, 180 mg, 240 mg, or 300 mg diltiazem hydrochloride.Each diltiazem extended-release capsule, for oral administration, contains the following inactive ingredients:120 mg — ammonio methacrylate copolymer NF, type A, ammonio methacrylate copolymer NF, type B, ammonium hydroxide, black iron oxide, gelatin, hydroxypropyl cellulose, pharmaceutical glaze, propylene glycol, silicon dioxide, simethicone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide, triethyl citrate180 mg — ammonio methacrylate copolymer NF, type A, ammonio methacrylate copolymer NF, type B, ammonium hydroxide, D and C yellow #10, FD and C blue #1, FD and C green #3, gelatin, hydroxypropyl cellulose, pharmaceutical glaze, propylene glycol, silicon dioxide, simethicone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide, triethyl citrate240 mg — ammonio methacrylate copolymer NF, type A, ammonio methacrylate copolymer NF, type B, ammonium hydroxide, D and C yellow #10, FD and C green #3, gelatin, hydroxypropyl cellulose, pharmaceutical glaze, propylene glycol, silicon dioxide, simethicone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide, triethyl citrate300 mg— ammonio methacrylate copolymer NF, type A, ammonio methacrylate copolymer NF, type B, ammonium hydroxide, black iron oxide, D and C yellow #10, FD and C green #3, gelatin, hydroxypropyl cellulose, pharmaceutical glaze, propylene glycol, silicon dioxide, simethicone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide, triethyl citrateThis drug product conforms to USP Drug release test #11."
},
{
"NDCCode": "68258-6031-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (68258-6031-9)",
"NDC11Code": "68258-6031-09",
"ProductNDC": "68258-6031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
"NonProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090528",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "100; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Losartan Potassium and Hydrochlorothiazide Tablets are indicated for the treatment of hypertension. This fixed dose combination is not indicated for initial therapy of hypertension, except when the hypertension is severe enough that the value of achieving prompt blood pressure control exceeds the risk of initiating combination therapy in these patients (see CLINICAL PHARMACOLOGY, Pharmacodynamics and Clinical Effects, and DOSAGE AND ADMINISTRATION). Hypertensive Patients with Left Ventricular Hypertrophy. Losartan Potassium and Hydrochlorothiazide Tablets are indicated to reduce the risk of stroke in patients with hypertension and left ventricular hypertrophy, but there is evidence that this benefit does not apply to Black patients. (See PRECAUTIONS, Race, CLINICAL PHARMACOLOGY, Pharmacodynamics and Clinical Effects, Losartan Potassium, Reduction in the Risk of Stroke, Race, and DOSAGE AND ADMINISTRATION).",
"Description": "Losartan Potassium and Hydrochlorothiazide 50 mg/12.5 mg, Losartan Potassium and Hydrochlorothiazide 100 mg/12.5 mg and Losartan Potassium and Hydrochlorothiazide 100 mg/25 mg combine an angiotensin II receptor (type AT1) antagonist and a diuretic, hydrochlorothiazide. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.74, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Losartan Potassium and Hydrochlorothiazide Tablets, USP are available for oral administration in three tablet combinations of losartan and hydrochlorothiazide. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg contain 50 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/12.5 mg contain 100 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg contain 100 mg of losartan potassium USP and 25 mg of hydrochlorothiazide USP. Inactive ingredients are colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, talc and titanium dioxide. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg and Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg also contain D and C yellow No. 10 lake. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg contain 4.24 mg (0.108 mEq) of potassium, Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/12.5 mg contain 8.48 mg (0.216 mEq) of potassium, and Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg contain 8.48 mg (0.216 mEq) of potassium."
},
{
"NDCCode": "68258-6036-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (68258-6036-9)",
"NDC11Code": "68258-6036-09",
"ProductNDC": "68258-6036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20051117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077321",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5(2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch. 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, red iron oxide, starch. 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch, yellow iron oxide."
},
{
"NDCCode": "68258-6040-9",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68258-6040-9)",
"NDC11Code": "68258-6040-09",
"ProductNDC": "68258-6040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
"NonProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101004",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078235",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "HYDROCHLOROTHIAZIDE; LOSARTAN POTASSIUM",
"StrengthNumber": "25; 100",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Losartan potassium and hydrochlorothiazide tablets 50 mg/ 12.5 mg and losartan potassium and hydrochlorothiazide tablets 100 mg/ 25 mg combine an angiotensin II receptor (type AT1) antagonist and a diuretic, hydrochlorothiazide. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its molecular formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is off-white to creamish-yellow powder with a molecular weight of 461.01. It is soluble in water. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white or practically white, practically odorless crystalline powder with a molecular weight of 297.74. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide, sparingly soluble in methanol; insoluble in ether, in chloroform, and in dilute mineral acids. Each losartan potassium and hydrochlorothiazide tablet intended for oral administration contains losartan potassium, 50 mg or 100 mg and hydrochlorothiazide, 12.5 mg or 25 mg. In addition, each tablet also contains the following inactive ingredients: colloidal silica anhydrous, hydroxypropyl cellulose (low substituted), hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, maize starch, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide. Losartan potassium and hydrochlorothiazide tablet 50 mg/ 12.5 mg contains 4.24 mg (0.108 mEq) of potassium and losartan potassium and hydrochlorothiazide tablet 100 mg/ 25 mg contains 8.48 mg (0.216 mEq) of potassium."
},
{
"NDCCode": "68258-6043-9",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68258-6043-9)",
"NDC11Code": "68258-6043-09",
"ProductNDC": "68258-6043",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20111201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076477",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.",
"Description": "Atorvastatin calcium is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R *,R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium, USP is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder. Atorvastatin calcium is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble to insoluble in water and pH 7.4 phosphate buffer; insoluble in acetonitrile; slightly soluble to very slightly soluble in ethanol; and freely soluble to slightly soluble in methanol. Atorvastatin calcium tablets for oral administration contain 10, 20, 40, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate; candelilla wax, FCC; croscarmellose sodium; hydroxypropyl cellulose; hypromellose; lactose monohydrate; magnesium stearate; microcrystalline cellulose; polyethylene glycol; polysorbate 80; simethicone emulsion; talc, and titanium dioxide."
},
{
"NDCCode": "68258-6044-9",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68258-6044-9)",
"NDC11Code": "68258-6044-09",
"ProductNDC": "68258-6044",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20111201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076477",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.",
"Description": "Atorvastatin calcium is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R *,R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium, USP is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder. Atorvastatin calcium is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble to insoluble in water and pH 7.4 phosphate buffer; insoluble in acetonitrile; slightly soluble to very slightly soluble in ethanol; and freely soluble to slightly soluble in methanol. Atorvastatin calcium tablets for oral administration contain 10, 20, 40, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate; candelilla wax, FCC; croscarmellose sodium; hydroxypropyl cellulose; hypromellose; lactose monohydrate; magnesium stearate; microcrystalline cellulose; polyethylene glycol; polysorbate 80; simethicone emulsion; talc, and titanium dioxide."
},
{
"NDCCode": "68258-6047-9",
"PackageDescription": "90 TABLET, FILM COATED in 1 PACKAGE (68258-6047-9)",
"NDC11Code": "68258-6047-09",
"ProductNDC": "68258-6047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Labetalol Hydrochloride",
"NonProprietaryName": "Labetalol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074787",
"LabelerName": "Dispensing Solutions, Inc.",
"SubstanceName": "LABETALOL HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.",
"Description": "Labetalol HCl USP tablets are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol HCl USP is a racemate, chemically designated as 5-[1-Hydroxy-2-[(1-methyl-3-phenylpropyl)amino]ethyl] salicylamide monohydrochloride, and it has the following structural formula. C 19H24N2O3 HCl M.W. 364.87. Labetalol HCl USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl USP is a white or off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, or 300 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, titanium dioxide and colorants (100 mg: D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake; and 300 mg: D&C yellow #10 aluminum lake, FD&C yellow #6 aluminum lake and FD&C blue #1 aluminum lake)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68258-7150-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68258-7150-9)</PackageDescription>
<NDC11Code>68258-7150-09</NDC11Code>
<ProductNDC>68258-7150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078722</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain,tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks)because adequate evidence of effectiveness for more prolonged use is not available and because musclespasm associated with acute, painful musculoskeletal conditions is generally of short duration and specifictherapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticityassociated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217° C, and a pKa of 8.47 at 25° C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride and insoluble in hydrocarbons. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d] cyclohepten-5- ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:Cyclobenzaprine hydrochloride tablets, USP are supplied as 7.5 mg tablets for oral administration. Cyclobenzaprine hydrochloride 7.5 mg tablets contain the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68788-7150-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68788-7150-9) </PackageDescription>
<NDC11Code>68788-7150-09</NDC11Code>
<ProductNDC>68788-7150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208963</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole tablets are indicated for the treatment of: : 1 1.Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 2.Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 3.Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.</IndicationAndUsage>
<Description>Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. Fluconazole tablet meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>50268-718-13</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 BOX (50268-718-13) / 1 TABLET in 1 BLISTER PACK (50268-718-11) </PackageDescription>
<NDC11Code>50268-0718-13</NDC11Code>
<ProductNDC>50268-718</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sirolimus</ProprietaryName>
<NonProprietaryName>Sirolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180423</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201578</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>SIROLIMUS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180423</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sirolimus is an immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C 51H 79NO 13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55111-653-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (55111-653-01) </PackageDescription>
<NDC11Code>55111-0653-01</NDC11Code>
<ProductNDC>55111-653</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sirolimus</ProprietaryName>
<NonProprietaryName>Sirolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141027</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201578</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
<SubstanceName>SIROLIMUS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C51H79NO13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55111-653-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (55111-653-30) </PackageDescription>
<NDC11Code>55111-0653-30</NDC11Code>
<ProductNDC>55111-653</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sirolimus</ProprietaryName>
<NonProprietaryName>Sirolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141027</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201578</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
<SubstanceName>SIROLIMUS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C51H79NO13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55111-654-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (55111-654-01) </PackageDescription>
<NDC11Code>55111-0654-01</NDC11Code>
<ProductNDC>55111-654</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sirolimus</ProprietaryName>
<NonProprietaryName>Sirolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141027</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201578</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
<SubstanceName>SIROLIMUS</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C51H79NO13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55111-654-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (55111-654-30) </PackageDescription>
<NDC11Code>55111-0654-30</NDC11Code>
<ProductNDC>55111-654</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sirolimus</ProprietaryName>
<NonProprietaryName>Sirolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141027</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201578</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
<SubstanceName>SIROLIMUS</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C51H79NO13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68084-915-25</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 BOX, UNIT-DOSE (68084-915-25) / 1 TABLET in 1 BLISTER PACK (68084-915-95) </PackageDescription>
<NDC11Code>68084-0915-25</NDC11Code>
<ProductNDC>68084-915</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sirolimus</ProprietaryName>
<NonProprietaryName>Sirolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201578</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>SIROLIMUS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sirolimus is an mTOR inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in patients aged ≥13 years receiving renal transplants:. Patients at low-to moderate-immunologic risk: Use initially with cyclosporine (CsA) and corticosteroids. CsA withdrawal is recommended 2 to 4 months after transplantation (1.1). . Patients at high-immunologic risk: Use in combination with CsA and corticosteroids for the first 12 months following transplantation (1.1). Safety and efficacy of CsA withdrawal has not been established in high risk patients (1.1, 1.2, 14.3). . Sirolimus is an mTOR inhibitor indicated for the treatment of patients with lymphangioleiomyomatosis (1.3). .</IndicationAndUsage>
<Description>Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)‑9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2‑ [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26‑ hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C 51H 79NO 13 and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70518-3795-0</NDCCode>
<PackageDescription>100 POUCH in 1 BOX (70518-3795-0) / 1 TABLET in 1 POUCH (70518-3795-1) </PackageDescription>
<NDC11Code>70518-3795-00</NDC11Code>
<ProductNDC>70518-3795</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sirolimus</ProprietaryName>
<NonProprietaryName>Sirolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201578</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>SIROLIMUS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sirolimus is an mTOR inhibitor immunosuppressive agent. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus (also known as rapamycin) is (3S,6R,7E,9R,10R,12R,14S,15E,17E,19E,21S,23S,26R,27R,34aS)9,10,12,13,14,21,22,23,24,25,26,27,32,33,34, 34a-hexadecahydro-9,27-dihydroxy-3-[(1R)-2 [(1S,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26 hexamethyl-23,27-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclohentriacontine-1,5,11,28,29 (4H,6H,31H)-pentone. Its molecular formula is C 51H 79NO 13and its molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows. Sirolimus is a white to off-white powder and is insoluble in water, but freely soluble in chloroform, acetone and acetonitrile. Sirolimus tablets are available as a white, triangular shaped tablet containing 1 mg sirolimus, and as a creamish yellow, triangular shaped tablet containing 2 mg sirolimus. The inactive ingredients in sirolimus tablets includes, carnauba wax, ethyl cellulose, hydroxypropyl methylcellulose 5 cps, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose (avicel pH 105), microcrystalline cellulose (avicel pH 200), poloxamer 188, polyethylene glycol 20000, polyethylene glycol 8000, sucrose, titanium dioxide, vitamin E preparation, seal coating agent opaglos clear NA 7150, and imprinting ink opacode red (S-1-15052). The 2 mg dosage strength also contains iron oxide red and iron oxide yellow. Seal coating agent opaglos clear NA 7150 contains, acetylated monoglyceride, industrial methylated spirit 74 OP, povidone, and shellac. Imprinting ink opacode red (S-1-15052) contains, ammonium hydroxide, FD&C Red # 40, propylene glycol, shellac glaze, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71872-7150-1</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (71872-7150-1) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>71872-7150-01</NDC11Code>
<ProductNDC>71872-7150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine</ProprietaryName>
<NonProprietaryName>Dexmedetomidine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209065</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC.</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmedetomidine Injection is a relatively selective alpha 2-adrenergic agonist indicated for: : 1 Sedation of non-intubated patients prior to and/or during surgical and other procedures. ( 1.2) .</IndicationAndUsage>
<Description>Dexmedetomidine Injection, USP is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2HCl and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride equivalent to 100 mcg (0.1 mg) of dexmedetomidine and 9 mg of sodium chloride in water and is to be used after dilution. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>68258-1104-9</NDCCode>
<PackageDescription>9 TABLET, FILM COATED in 1 PACKAGE (68258-1104-9)</PackageDescription>
<NDC11Code>68258-1104-09</NDC11Code>
<ProductNDC>68258-1104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atovaquone And Proguanil Hydrochloride</ProprietaryName>
<NonProprietaryName>Atovaquone And Proguanil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110818</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091211</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>ATOVAQUONE; PROGUANIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250; 100</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC],Antiprotozoal [EPC],Antimalarial [EPC],Dihydrofolate Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Atovaquone and proguanil hydrochloride tablets are indicated for the prophylaxis of P. falciparum malaria, including in areas where chloroquine resistance has been reported (see CLINICAL STUDIES).</IndicationAndUsage>
<Description>Atovaquone and proguanil hydrochloride is a fixed-dose combination of the antimalarial agents atovaquone and proguanil hydrochloride. The chemical name of atovaquone is trans-2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-1,4-naphthalenedione. Atovaquone is a yellow crystalline solid that is practically insoluble in water. It has a molecular weight of 366.84 and the molecular formula C22H19ClO3. The compound has the following structural formula:. The chemical name of proguanil hydrochloride USP is 1-(4-chlorophenyl)-5-isopropyl-biguanide hydrochloride. Proguanil hydrochloride USP is a white crystalline solid that is sparingly soluble in water. It has a molecular weight of 290.22 and the molecular formula C11H16ClN5HCl. The compound has the following structural formula:. Atovaquone and proguanil hydrochloride tablets are for oral administration. Each atovaquone and proguanil hydrochloride tablet contains 250 mg of atovaquone and 100 mg of proguanil hydrochloride USP. The inactive ingredients in the tablet are colloidal silicon dioxide, ferric oxide red, hypromellose 2910, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, poloxamer 188, povidone K30, polyethylene glycol 400, polyethylene glycol 8000, sodium starch glycolate, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68258-2012-9</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (68258-2012-9)</PackageDescription>
<NDC11Code>68258-2012-09</NDC11Code>
<ProductNDC>68258-2012</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butalbital, Acetaminophen, Caffeine And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Butalbital, Acetaminophen, Caffeine And Codeine Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076560</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>BUTALBITAL; ACETAMINOPHEN; CAFFEINE; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>50; 325; 40; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Barbiturates [CS],Barbiturate [EPC],Central Nervous System Stimulant [EPC],Methylxanthine [EPC],Xanthines [CS],Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because codeine and butalbital are habit-forming and potentially abusable.</IndicationAndUsage>
<Description>Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate is supplied in capsule form for oral administration. Each capsule contains the following active ingredients. Codeine phosphate [7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, C18H24N07P, anhydrous mw 397.37], is a narcotic analgesic and antitussive. The structural formula of codeine phosphate is. Butalbital (5-allyl-5-isobutylbarbituric acid, C11H16N203, mw 224.26), is a short-to intermediate- acting barbiturate. The structural formula of butalbital is. Caffeine (1,3,7-trimethylxanthine, C8H10N4O2, mw 194.19), is a central nervous system stimulant. The structural formula of caffeine is. Acetaminophen (4'-hydroxyacetanilide, C8H9NO2, mw 151.16), is a non-opiate, non-salicylate analgesic and antipyretic. The structural formula of acetaminophen is. Active Ingredients: Codeine Phosphate, USP, Butalbital, USP, Caffeine, USP, and Acetaminophen, USP. Inactive Ingredients: FD&C Blue No. 1, FD&C Red No. 3, FD&C Red No. 40, *FD&C Yellow No.5 (see PRECAUTIONS), Gelatin, Microcrystalline Cellulose, Sodium Lauryl Sulfate, Stearic Acid, Talc, Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68258-2997-9</NDCCode>
<PackageDescription>120 mL in 1 BOTTLE (68258-2997-9)</PackageDescription>
<NDC11Code>68258-2997-09</NDC11Code>
<ProductNDC>68258-2997</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dendracin Neurodendraxcin</ProprietaryName>
<NonProprietaryName>Methyl Salicylate, Menthol And Capsaicin</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110722</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>METHYL SALICYLATE; MENTHOL; CAPSAICIN</SubstanceName>
<StrengthNumber>30; 10; .025</StrengthNumber>
<StrengthUnit>g/60mL; g/60mL; g/60mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For temporary relief of mild pain due to muscular strain, arthritis, and simple back pain. Does not cure any disease.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68258-3008-1</NDCCode>
<PackageDescription>9 TABLET, FILM COATED in 1 BLISTER PACK (68258-3008-1)</PackageDescription>
<NDC11Code>68258-3008-01</NDC11Code>
<ProductNDC>68258-3008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sumatriptan Succinate</ProprietaryName>
<NonProprietaryName>Sumatriptan Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090303</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020132</ApplicationNumber>
<LabelerName>Dispensing Solutions Inc.</LabelerName>
<SubstanceName>SUMATRIPTAN SUCCINATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1d Receptor Agonists [MoA],Serotonin-1b and Serotonin-1d Receptor Agonist [EPC],Serotonin 1b Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Sumatriptan Succinate Tablets are indicated for the acute treatment of migraine attacks with or without aura in adults. Sumatriptan Succinate Tablets are not intended for the prophylactic therapy of migraine or for use in the management of hemiplegic or basilar migraine (see CONTRAINDICATIONS). Safety and effectiveness of Sumatriptan Succinate Tablets have not been established for cluster headache, which is present in an older, predominantly male population.</IndicationAndUsage>
<Description>Sumatriptan Succinate Tablets contain sumatriptan (as the succinate), a selective 5-hydroxytryptamine1 receptor subtype agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure. The empirical formula is C14H21N3O2SC4H6O4, representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Each Sumatriptan Succinate Tablet for oral administration contains 35, 70, or 140 mg of sumatriptan succinate equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, and sodium bicarbonate.</Description>
</NDC>
<NDC>
<NDCCode>68258-3009-1</NDCCode>
<PackageDescription>9 TABLET, FILM COATED in 1 BLISTER PACK (68258-3009-1)</PackageDescription>
<NDC11Code>68258-3009-01</NDC11Code>
<ProductNDC>68258-3009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sumatriptan Succinate</ProprietaryName>
<NonProprietaryName>Sumatriptan Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090303</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020132</ApplicationNumber>
<LabelerName>Dispensing Solutions Inc.</LabelerName>
<SubstanceName>SUMATRIPTAN SUCCINATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1d Receptor Agonists [MoA],Serotonin-1b and Serotonin-1d Receptor Agonist [EPC],Serotonin 1b Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Sumatriptan Succinate Tablets are indicated for the acute treatment of migraine attacks with or without aura in adults. Sumatriptan Succinate Tablets are not intended for the prophylactic therapy of migraine or for use in the management of hemiplegic or basilar migraine (see CONTRAINDICATIONS). Safety and effectiveness of Sumatriptan Succinate Tablets have not been established for cluster headache, which is present in an older, predominantly male population.</IndicationAndUsage>
<Description>Sumatriptan Succinate Tablets contain sumatriptan (as the succinate), a selective 5-hydroxytryptamine1 receptor subtype agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure. The empirical formula is C14H21N3O2SC4H6O4, representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Each Sumatriptan Succinate Tablet for oral administration contains 35, 70, or 140 mg of sumatriptan succinate equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, and sodium bicarbonate.</Description>
</NDC>
<NDC>
<NDCCode>68258-3035-1</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (68258-3035-1) > 9 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68258-3035-01</NDC11Code>
<ProductNDC>68258-3035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mucinex D</ProprietaryName>
<NonProprietaryName>Guaifenesin And Pseudoephedrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080208</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021585</ApplicationNumber>
<LabelerName>Dispensing Solutions Inc.</LabelerName>
<SubstanceName>GUAIFENESIN; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>600; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA],alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive. temporarily relieves nasal congestion due to: common coldhay feverupper respiratory allergies. temporarily restores freer breathing through the nose. promotes nasal and/or sinus drainage. temporarily relieves sinus congestion and pressure.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68258-5948-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (68258-5948-9)</PackageDescription>
<NDC11Code>68258-5948-09</NDC11Code>
<ProductNDC>68258-5948</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Synthroid</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020724</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021402</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>l-Thyroxine [EPC],Thyroxine [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Levothyroxine sodium is used for the following indications.</IndicationAndUsage>
<Description>SYNTHROID (levothyroxine sodium tablets, USP) contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown.</Description>
</NDC>
<NDC>
<NDCCode>68258-5972-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68258-5972-9)</PackageDescription>
<NDC11Code>68258-5972-09</NDC11Code>
<ProductNDC>68258-5972</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Synthroid</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020724</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021402</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>88</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>l-Thyroxine [EPC],Thyroxine [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Levothyroxine sodium is used for the following indications.</IndicationAndUsage>
<Description>SYNTHROID (levothyroxine sodium tablets, USP) contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown.</Description>
</NDC>
<NDC>
<NDCCode>68258-5973-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68258-5973-9)</PackageDescription>
<NDC11Code>68258-5973-09</NDC11Code>
<ProductNDC>68258-5973</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Synthroid</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020724</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021402</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>l-Thyroxine [EPC],Thyroxine [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Levothyroxine sodium is used for the following indications.</IndicationAndUsage>
<Description>SYNTHROID (levothyroxine sodium tablets, USP) contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown.</Description>
</NDC>
<NDC>
<NDCCode>68258-5974-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68258-5974-9)</PackageDescription>
<NDC11Code>68258-5974-09</NDC11Code>
<ProductNDC>68258-5974</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Synthroid</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020724</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021402</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>l-Thyroxine [EPC],Thyroxine [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Levothyroxine sodium is used for the following indications.</IndicationAndUsage>
<Description>SYNTHROID (levothyroxine sodium tablets, USP) contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown.</Description>
</NDC>
<NDC>
<NDCCode>68258-6010-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68258-6010-9)</PackageDescription>
<NDC11Code>68258-6010-09</NDC11Code>
<ProductNDC>68258-6010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081013</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078955</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>hydrochloride(Propranolol is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It’s molecular and structural formulae are. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80.Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration.The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain and C yellow No.6 Aluminium Lake and Color D and C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD and C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D and C Red No. 30 Lake.</Description>
</NDC>
<NDC>
<NDCCode>68258-6019-9</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (68258-6019-9)</PackageDescription>
<NDC11Code>68258-6019-09</NDC11Code>
<ProductNDC>68258-6019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076862</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Metoprolol succinate is a beta1-selective adrenoceptor blocking agent. Metoprolol succinate extended-release tablets USP are indicated for the treatment of: : 1 Hypertension (1.1) , 2 Angina Pectoris (1.2) , 3 Heart Failure - for the treatment of stable, symptomatic (NYHA Class II or III) heart failure of ischemic, hypertensive, or cardiomyopathic origin.(1.3).</IndicationAndUsage>
<Description>Metoprolol succinate is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended release tablets. Metoprolol succinate extended-release tablets USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: cellulose acetate butyrate, corn starch, crospovidone, glyceryl monostearate, hypromellose, methacrylic acid copolymer, microcrystalline cellulose, poloxamer 188, polyethylene glycol, polysorbate 80, sucrose, and titanium dioxide. USP Dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>68258-6023-9</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (68258-6023-9)</PackageDescription>
<NDC11Code>68258-6023-09</NDC11Code>
<ProductNDC>68258-6023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ramipril</ProprietaryName>
<NonProprietaryName>Ramipril</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077900</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>RAMIPRIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ramipril Capsules USP are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics (1.1).</IndicationAndUsage>
<Description>Ramipril is a 2azabicyclo [3.3.0]octane3carboxylic acid derivative. It is a white, crystalline substance soluble in polar organic solvents and buffered aqueous solutions. Ramipril melts between 105°C to 112°C. Ramipril's chemical name is (2S,3aS,6aS)1-[(S)N[(S)1-Carboxy3phenylpropyl] alanyl] octahydrocyclopenta [b]pyrrole2carboxylic acid, 1ethyl ester. The inactive ingredients present are pregelatinized starch, gelatin, and titanium dioxide. In addition to the ingredients listed above, the 1.25 mg capsule shell contains D&C yellow #10 and FD&C yellow #6, the 2.5 mg capsule shell contains FD&C yellow #6, the 5 mg capsule shell contains D&C red #28, FD&C blue #1 and FD&C yellow #6, and the 10 mg capsule shell contains D&C red #28 and FD&C blue #1. The ink contains ethanol, FD&C blue #2, FD&C red #40, FD&C yellow#6, iron oxide black, n-butyl alcohol, propylene glycol, and shellac glaze. The structural formula for ramipril is. Its molecular formula is C23H32N2O5, and its molecular weight is 416.51. Ramiprilat, the diacid metabolite of ramipril, is a nonsulfhydryl ACE inhibitor. Ramipril is converted to ramiprilat by hepatic cleavage of the ester group.</Description>
</NDC>
<NDC>
<NDCCode>68258-6024-9</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (68258-6024-9)</PackageDescription>
<NDC11Code>68258-6024-09</NDC11Code>
<ProductNDC>68258-6024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19991220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074984</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Calcium Channel Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Diltiazem hydrochloride extended-release capsules, USP are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive medications. Diltiazem hydrochloride extended-release capsules, USP are indicated for the management of chronic stable angina and angina due to coronary artery spasm.</IndicationAndUsage>
<Description>Diltiazem hydrochloride, USP is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-benzothiazepin-4(5H)one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2,3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride,(+)-cis-. The chemical structure is. Diltiazem hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. It has a molecular weight of 450.98. Diltiazem hydrochloride, USP is formulated as a once-a-day extended release capsule containing either 120 mg, 180 mg, 240 mg, or 300 mg diltiazem hydrochloride.Each diltiazem extended-release capsule, for oral administration, contains the following inactive ingredients:120 mg — ammonio methacrylate copolymer NF, type A, ammonio methacrylate copolymer NF, type B, ammonium hydroxide, black iron oxide, gelatin, hydroxypropyl cellulose, pharmaceutical glaze, propylene glycol, silicon dioxide, simethicone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide, triethyl citrate180 mg — ammonio methacrylate copolymer NF, type A, ammonio methacrylate copolymer NF, type B, ammonium hydroxide, D and C yellow #10, FD and C blue #1, FD and C green #3, gelatin, hydroxypropyl cellulose, pharmaceutical glaze, propylene glycol, silicon dioxide, simethicone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide, triethyl citrate240 mg — ammonio methacrylate copolymer NF, type A, ammonio methacrylate copolymer NF, type B, ammonium hydroxide, D and C yellow #10, FD and C green #3, gelatin, hydroxypropyl cellulose, pharmaceutical glaze, propylene glycol, silicon dioxide, simethicone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide, triethyl citrate300 mg— ammonio methacrylate copolymer NF, type A, ammonio methacrylate copolymer NF, type B, ammonium hydroxide, black iron oxide, D and C yellow #10, FD and C green #3, gelatin, hydroxypropyl cellulose, pharmaceutical glaze, propylene glycol, silicon dioxide, simethicone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide, triethyl citrateThis drug product conforms to USP Drug release test #11.</Description>
</NDC>
<NDC>
<NDCCode>68258-6031-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68258-6031-9)</PackageDescription>
<NDC11Code>68258-6031-09</NDC11Code>
<ProductNDC>68258-6031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Losartan Potassium And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090528</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>100; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Losartan Potassium and Hydrochlorothiazide Tablets are indicated for the treatment of hypertension. This fixed dose combination is not indicated for initial therapy of hypertension, except when the hypertension is severe enough that the value of achieving prompt blood pressure control exceeds the risk of initiating combination therapy in these patients (see CLINICAL PHARMACOLOGY, Pharmacodynamics and Clinical Effects, and DOSAGE AND ADMINISTRATION). Hypertensive Patients with Left Ventricular Hypertrophy. Losartan Potassium and Hydrochlorothiazide Tablets are indicated to reduce the risk of stroke in patients with hypertension and left ventricular hypertrophy, but there is evidence that this benefit does not apply to Black patients. (See PRECAUTIONS, Race, CLINICAL PHARMACOLOGY, Pharmacodynamics and Clinical Effects, Losartan Potassium, Reduction in the Risk of Stroke, Race, and DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Losartan Potassium and Hydrochlorothiazide 50 mg/12.5 mg, Losartan Potassium and Hydrochlorothiazide 100 mg/12.5 mg and Losartan Potassium and Hydrochlorothiazide 100 mg/25 mg combine an angiotensin II receptor (type AT1) antagonist and a diuretic, hydrochlorothiazide. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.74, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Losartan Potassium and Hydrochlorothiazide Tablets, USP are available for oral administration in three tablet combinations of losartan and hydrochlorothiazide. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg contain 50 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/12.5 mg contain 100 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg contain 100 mg of losartan potassium USP and 25 mg of hydrochlorothiazide USP. Inactive ingredients are colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, talc and titanium dioxide. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg and Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg also contain D and C yellow No. 10 lake. Losartan Potassium and Hydrochlorothiazide Tablets, USP 50 mg/12.5 mg contain 4.24 mg (0.108 mEq) of potassium, Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/12.5 mg contain 8.48 mg (0.216 mEq) of potassium, and Losartan Potassium and Hydrochlorothiazide Tablets, USP 100 mg/25 mg contain 8.48 mg (0.216 mEq) of potassium.</Description>
</NDC>
<NDC>
<NDCCode>68258-6036-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68258-6036-9)</PackageDescription>
<NDC11Code>68258-6036-09</NDC11Code>
<ProductNDC>68258-6036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077321</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5(2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch. 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, red iron oxide, starch. 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch, yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>68258-6040-9</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68258-6040-9)</PackageDescription>
<NDC11Code>68258-6040-09</NDC11Code>
<ProductNDC>68258-6040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Losartan Potassium And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101004</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078235</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>25; 100</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Losartan potassium and hydrochlorothiazide tablets 50 mg/ 12.5 mg and losartan potassium and hydrochlorothiazide tablets 100 mg/ 25 mg combine an angiotensin II receptor (type AT1) antagonist and a diuretic, hydrochlorothiazide. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its molecular formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is off-white to creamish-yellow powder with a molecular weight of 461.01. It is soluble in water. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white or practically white, practically odorless crystalline powder with a molecular weight of 297.74. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide, sparingly soluble in methanol; insoluble in ether, in chloroform, and in dilute mineral acids. Each losartan potassium and hydrochlorothiazide tablet intended for oral administration contains losartan potassium, 50 mg or 100 mg and hydrochlorothiazide, 12.5 mg or 25 mg. In addition, each tablet also contains the following inactive ingredients: colloidal silica anhydrous, hydroxypropyl cellulose (low substituted), hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, maize starch, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide. Losartan potassium and hydrochlorothiazide tablet 50 mg/ 12.5 mg contains 4.24 mg (0.108 mEq) of potassium and losartan potassium and hydrochlorothiazide tablet 100 mg/ 25 mg contains 8.48 mg (0.216 mEq) of potassium.</Description>
</NDC>
<NDC>
<NDCCode>68258-6043-9</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68258-6043-9)</PackageDescription>
<NDC11Code>68258-6043-09</NDC11Code>
<ProductNDC>68258-6043</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076477</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.</IndicationAndUsage>
<Description>Atorvastatin calcium is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R *,R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium, USP is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder. Atorvastatin calcium is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble to insoluble in water and pH 7.4 phosphate buffer; insoluble in acetonitrile; slightly soluble to very slightly soluble in ethanol; and freely soluble to slightly soluble in methanol. Atorvastatin calcium tablets for oral administration contain 10, 20, 40, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate; candelilla wax, FCC; croscarmellose sodium; hydroxypropyl cellulose; hypromellose; lactose monohydrate; magnesium stearate; microcrystalline cellulose; polyethylene glycol; polysorbate 80; simethicone emulsion; talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68258-6044-9</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68258-6044-9)</PackageDescription>
<NDC11Code>68258-6044-09</NDC11Code>
<ProductNDC>68258-6044</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076477</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.</IndicationAndUsage>
<Description>Atorvastatin calcium is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R *,R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium, USP is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder. Atorvastatin calcium is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble to insoluble in water and pH 7.4 phosphate buffer; insoluble in acetonitrile; slightly soluble to very slightly soluble in ethanol; and freely soluble to slightly soluble in methanol. Atorvastatin calcium tablets for oral administration contain 10, 20, 40, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate; candelilla wax, FCC; croscarmellose sodium; hydroxypropyl cellulose; hypromellose; lactose monohydrate; magnesium stearate; microcrystalline cellulose; polyethylene glycol; polysorbate 80; simethicone emulsion; talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68258-6047-9</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 PACKAGE (68258-6047-9)</PackageDescription>
<NDC11Code>68258-6047-09</NDC11Code>
<ProductNDC>68258-6047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
<NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074787</ApplicationNumber>
<LabelerName>Dispensing Solutions, Inc.</LabelerName>
<SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.</IndicationAndUsage>
<Description>Labetalol HCl USP tablets are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol HCl USP is a racemate, chemically designated as 5-[1-Hydroxy-2-[(1-methyl-3-phenylpropyl)amino]ethyl] salicylamide monohydrochloride, and it has the following structural formula. C 19H24N2O3 HCl M.W. 364.87. Labetalol HCl USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl USP is a white or off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, or 300 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, titanium dioxide and colorants (100 mg: D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake; and 300 mg: D&C yellow #10 aluminum lake, FD&C yellow #6 aluminum lake and FD&C blue #1 aluminum lake).</Description>
</NDC>
</NDCList>