{
"NDC": [
{
"NDCCode": "68382-529-42",
"PackageDescription": "231 g in 1 CONTAINER (68382-529-42) ",
"NDC11Code": "68382-0529-42",
"ProductNDC": "68382-529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cholestyramine",
"NonProprietaryName": "Cholestyramine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20170608",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202902",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "CHOLESTYRAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/5.5g",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170608",
"SamplePackage": "N",
"IndicationAndUsage": "1) Cholestyramine for oral suspension USP light powder, is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for oral suspension USP light powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine for oral suspension USP light powder secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (< 4.5 mmol/L), LDL-C can be estimated using the following equation:-. LDL-C = Total cholesterol – [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine for oral suspension USP light powder may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine for oral suspension USP light powder therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine for oral suspension USP light powder or adding other lipid-lowering agents in combination with cholestyramine for oral suspension USP light powder should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine for oral suspension USP light powder monotherapy has been demonstrated to retard the rate of progression2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for oral suspension USP light powder is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine for oral suspension USP light powder has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.",
"Description": "Cholestyramine for oral suspension USP light powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in cholestyramine for oral suspension USP light powder is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 5.5 grams of cholestyramine for oral suspension USP light powder. It is represented by the following structural formula. Cholestyramine for oral suspension USP light powder contains the following inactive ingredients: aspartame, citric acid, colloidal silicon dioxide, D&C Yellow # 10 aluminum lake, FD&C Yellow # 6 aluminum lake, flavor (natural and artificial Orange, natural and artificial Vanilla), mannitol, propylene glycol alginate and xanthan gum."
},
{
"NDCCode": "68382-529-60",
"PackageDescription": "60 POUCH in 1 CARTON (68382-529-60) / 5.5 g in 1 POUCH",
"NDC11Code": "68382-0529-60",
"ProductNDC": "68382-529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cholestyramine",
"NonProprietaryName": "Cholestyramine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20170608",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202902",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "CHOLESTYRAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/5.5g",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170608",
"SamplePackage": "N",
"IndicationAndUsage": "1) Cholestyramine for oral suspension USP light powder, is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for oral suspension USP light powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine for oral suspension USP light powder secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (< 4.5 mmol/L), LDL-C can be estimated using the following equation:-. LDL-C = Total cholesterol – [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine for oral suspension USP light powder may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine for oral suspension USP light powder therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine for oral suspension USP light powder or adding other lipid-lowering agents in combination with cholestyramine for oral suspension USP light powder should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine for oral suspension USP light powder monotherapy has been demonstrated to retard the rate of progression2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for oral suspension USP light powder is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine for oral suspension USP light powder has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.",
"Description": "Cholestyramine for oral suspension USP light powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in cholestyramine for oral suspension USP light powder is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 5.5 grams of cholestyramine for oral suspension USP light powder. It is represented by the following structural formula. Cholestyramine for oral suspension USP light powder contains the following inactive ingredients: aspartame, citric acid, colloidal silicon dioxide, D&C Yellow # 10 aluminum lake, FD&C Yellow # 6 aluminum lake, flavor (natural and artificial Orange, natural and artificial Vanilla), mannitol, propylene glycol alginate and xanthan gum."
},
{
"NDCCode": "68382-260-04",
"PackageDescription": "42 CAPSULE in 1 BOTTLE (68382-260-04) ",
"NDC11Code": "68382-0260-04",
"ProductNDC": "68382-260",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ribavirin",
"NonProprietaryName": "Ribavirin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20060125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077224",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "RIBAVIRIN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20060125",
"SamplePackage": "N",
"IndicationAndUsage": "Ribavirin is a nucleoside analogue indicated in combination with interferon alfa- 2b (pegylated and nonpegylated) for the treatment of Chronic Hepatitis C (CHC) in patients 3 years of age or older with compensated liver disease. (1.1). Patients with the following characteristics are less likely to benefit from re-treatment after failing a course of therapy: previous nonresponse, previous pegylated interferon treatment, significant bridging fibrosis or cirrhosis, and genotype 1 infection.",
"Description": "Ribavirin is a synthetic nucleoside analogue (purine analogue). The chemical name of ribavirin is 1-β-D-ribofuranosyl-1H-1,2,4-triazole-3-carboxamide and has the following structural formula (see Figure 1). Figure 1: Structural Formula. Ribavirin, USP is a white, crystalline powder. It is freely soluble in water and slightly soluble in dehydrated alcohol. The molecular formula is C8H12N4O5 and the molecular weight is 244.21. Each ribavirin capsule, USP intended for oral administration contains 200 mg of ribavirin, USP in white, hard gelatin capsule shells. In addition, each capsule contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, and silicon dioxide. The capsule shell consists of gelatin and titanium dioxide. It may also contain sodium lauryl sulfate. The capsule is printed with black pharmaceutical ink."
},
{
"NDCCode": "68382-528-42",
"PackageDescription": "378 g in 1 CAN (68382-528-42) ",
"NDC11Code": "68382-0528-42",
"ProductNDC": "68382-528",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cholestyramine",
"NonProprietaryName": "Cholestyramine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202901",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "CHOLESTYRAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/9g",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "1) Cholestyramine for oral suspension is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for oral suspension may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine for oral suspension secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (< 4.5 mmol/L), LDL-C can be estimated using the following equation:-. LDL-C = Total cholesterol – [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine for oral suspension may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine for oral suspension therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine for oral suspension or adding other lipid-lowering agents in combination with cholestyramine for oral suspension should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine for oral suspension monotherapy has been demonstrated to retard the rate of progression2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for oral suspension is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine for oral suspension has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.",
"Description": "Cholestyramine for oral suspension USP, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in cholestyramine for oral suspension, USP is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 9 grams of cholestyramine for oral suspension, USP. It is represented by the following structural formula. Cholestyramine for oral suspension, USP contains the following inactive ingredients: citric acid, d & c yellow # 10 aluminum lake, flavor (natural and artificial orange, natural and artificial vanilla), fd & c yellow # 6 aluminum lake, propylene glycol alginate, sucrose and xanthan gum."
},
{
"NDCCode": "68382-859-01",
"PackageDescription": "100 TABLET, COATED in 1 BOTTLE (68382-859-01) ",
"NDC11Code": "68382-0859-01",
"ProductNDC": "68382-859",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-859-05",
"PackageDescription": "500 TABLET, COATED in 1 BOTTLE (68382-859-05) ",
"NDC11Code": "68382-0859-05",
"ProductNDC": "68382-859",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-859-06",
"PackageDescription": "30 TABLET, COATED in 1 BOTTLE (68382-859-06) ",
"NDC11Code": "68382-0859-06",
"ProductNDC": "68382-859",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-859-16",
"PackageDescription": "90 TABLET, COATED in 1 BOTTLE (68382-859-16) ",
"NDC11Code": "68382-0859-16",
"ProductNDC": "68382-859",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-859-77",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (68382-859-77) / 1 TABLET, COATED in 1 BLISTER PACK (68382-859-30) ",
"NDC11Code": "68382-0859-77",
"ProductNDC": "68382-859",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-965-01",
"PackageDescription": "100 TABLET, COATED in 1 BOTTLE (68382-965-01) ",
"NDC11Code": "68382-0965-01",
"ProductNDC": "68382-965",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-965-05",
"PackageDescription": "500 TABLET, COATED in 1 BOTTLE (68382-965-05) ",
"NDC11Code": "68382-0965-05",
"ProductNDC": "68382-965",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-965-06",
"PackageDescription": "30 TABLET, COATED in 1 BOTTLE (68382-965-06) ",
"NDC11Code": "68382-0965-06",
"ProductNDC": "68382-965",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-965-16",
"PackageDescription": "90 TABLET, COATED in 1 BOTTLE (68382-965-16) ",
"NDC11Code": "68382-0965-16",
"ProductNDC": "68382-965",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-965-77",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (68382-965-77) / 1 TABLET, COATED in 1 BLISTER PACK (68382-965-30) ",
"NDC11Code": "68382-0965-77",
"ProductNDC": "68382-965",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-966-01",
"PackageDescription": "100 TABLET, COATED in 1 BOTTLE (68382-966-01) ",
"NDC11Code": "68382-0966-01",
"ProductNDC": "68382-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-966-05",
"PackageDescription": "500 TABLET, COATED in 1 BOTTLE (68382-966-05) ",
"NDC11Code": "68382-0966-05",
"ProductNDC": "68382-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-966-06",
"PackageDescription": "30 TABLET, COATED in 1 BOTTLE (68382-966-06) ",
"NDC11Code": "68382-0966-06",
"ProductNDC": "68382-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230323",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-966-16",
"PackageDescription": "90 TABLET, COATED in 1 BOTTLE (68382-966-16) ",
"NDC11Code": "68382-0966-16",
"ProductNDC": "68382-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-966-77",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (68382-966-77) / 1 TABLET, COATED in 1 BLISTER PACK (68382-966-30) ",
"NDC11Code": "68382-0966-77",
"ProductNDC": "68382-966",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-967-01",
"PackageDescription": "100 TABLET, COATED in 1 BOTTLE (68382-967-01) ",
"NDC11Code": "68382-0967-01",
"ProductNDC": "68382-967",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-967-05",
"PackageDescription": "500 TABLET, COATED in 1 BOTTLE (68382-967-05) ",
"NDC11Code": "68382-0967-05",
"ProductNDC": "68382-967",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-967-06",
"PackageDescription": "30 TABLET, COATED in 1 BOTTLE (68382-967-06) ",
"NDC11Code": "68382-0967-06",
"ProductNDC": "68382-967",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-967-16",
"PackageDescription": "90 TABLET, COATED in 1 BOTTLE (68382-967-16) ",
"NDC11Code": "68382-0967-16",
"ProductNDC": "68382-967",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-967-77",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (68382-967-77) / 1 TABLET, COATED in 1 BLISTER PACK (68382-967-30) ",
"NDC11Code": "68382-0967-77",
"ProductNDC": "68382-967",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-968-01",
"PackageDescription": "100 TABLET, COATED in 1 BOTTLE (68382-968-01) ",
"NDC11Code": "68382-0968-01",
"ProductNDC": "68382-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-968-05",
"PackageDescription": "500 TABLET, COATED in 1 BOTTLE (68382-968-05) ",
"NDC11Code": "68382-0968-05",
"ProductNDC": "68382-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-968-06",
"PackageDescription": "30 TABLET, COATED in 1 BOTTLE (68382-968-06) ",
"NDC11Code": "68382-0968-06",
"ProductNDC": "68382-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-968-16",
"PackageDescription": "90 TABLET, COATED in 1 BOTTLE (68382-968-16) ",
"NDC11Code": "68382-0968-16",
"ProductNDC": "68382-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "68382-968-77",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (68382-968-77) / 1 TABLET, COATED in 1 BLISTER PACK (68382-968-30) ",
"NDC11Code": "68382-0968-77",
"ProductNDC": "68382-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208052",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc."
},
{
"NDCCode": "31722-529-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (31722-529-01) ",
"NDC11Code": "31722-0529-01",
"ProductNDC": "31722-529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Torsemide",
"NonProprietaryName": "Torsemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079234",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "TORSEMIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2018-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110101",
"SamplePackage": "N",
"IndicationAndUsage": "Torsemide tablets are a loop diuretic indicated for: the treatment of edema associated with heart failure, renal disease or hepatic disease. (1.1) the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.2).",
"Description": "Torsemide is a diuretic of the pyridine-sulfonylurea class. Its chemical name is 1-isopropyl-3-[(4-m-toluidino-3-pyridyl) sulfonyl]urea and its structural formula is. Its molecular formula is C16H20N4O3S, its pKa is 6.42, and its molecular weight is 348.43. Torsemide USP is a white to off-white crystalline powder. The tablets for oral administration also contain crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose and povidone."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68382-529-42</NDCCode>
<PackageDescription>231 g in 1 CONTAINER (68382-529-42) </PackageDescription>
<NDC11Code>68382-0529-42</NDC11Code>
<ProductNDC>68382-529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cholestyramine</ProprietaryName>
<NonProprietaryName>Cholestyramine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170608</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202902</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>CHOLESTYRAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/5.5g</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1) Cholestyramine for oral suspension USP light powder, is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for oral suspension USP light powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine for oral suspension USP light powder secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (< 4.5 mmol/L), LDL-C can be estimated using the following equation:-. LDL-C = Total cholesterol – [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine for oral suspension USP light powder may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine for oral suspension USP light powder therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine for oral suspension USP light powder or adding other lipid-lowering agents in combination with cholestyramine for oral suspension USP light powder should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine for oral suspension USP light powder monotherapy has been demonstrated to retard the rate of progression2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for oral suspension USP light powder is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine for oral suspension USP light powder has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.</IndicationAndUsage>
<Description>Cholestyramine for oral suspension USP light powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in cholestyramine for oral suspension USP light powder is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 5.5 grams of cholestyramine for oral suspension USP light powder. It is represented by the following structural formula. Cholestyramine for oral suspension USP light powder contains the following inactive ingredients: aspartame, citric acid, colloidal silicon dioxide, D&C Yellow # 10 aluminum lake, FD&C Yellow # 6 aluminum lake, flavor (natural and artificial Orange, natural and artificial Vanilla), mannitol, propylene glycol alginate and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>68382-529-60</NDCCode>
<PackageDescription>60 POUCH in 1 CARTON (68382-529-60) / 5.5 g in 1 POUCH</PackageDescription>
<NDC11Code>68382-0529-60</NDC11Code>
<ProductNDC>68382-529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cholestyramine</ProprietaryName>
<NonProprietaryName>Cholestyramine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170608</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202902</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>CHOLESTYRAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/5.5g</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1) Cholestyramine for oral suspension USP light powder, is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for oral suspension USP light powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine for oral suspension USP light powder secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (< 4.5 mmol/L), LDL-C can be estimated using the following equation:-. LDL-C = Total cholesterol – [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine for oral suspension USP light powder may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine for oral suspension USP light powder therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine for oral suspension USP light powder or adding other lipid-lowering agents in combination with cholestyramine for oral suspension USP light powder should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine for oral suspension USP light powder monotherapy has been demonstrated to retard the rate of progression2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for oral suspension USP light powder is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine for oral suspension USP light powder has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.</IndicationAndUsage>
<Description>Cholestyramine for oral suspension USP light powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in cholestyramine for oral suspension USP light powder is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 5.5 grams of cholestyramine for oral suspension USP light powder. It is represented by the following structural formula. Cholestyramine for oral suspension USP light powder contains the following inactive ingredients: aspartame, citric acid, colloidal silicon dioxide, D&C Yellow # 10 aluminum lake, FD&C Yellow # 6 aluminum lake, flavor (natural and artificial Orange, natural and artificial Vanilla), mannitol, propylene glycol alginate and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>68382-260-04</NDCCode>
<PackageDescription>42 CAPSULE in 1 BOTTLE (68382-260-04) </PackageDescription>
<NDC11Code>68382-0260-04</NDC11Code>
<ProductNDC>68382-260</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ribavirin</ProprietaryName>
<NonProprietaryName>Ribavirin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077224</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>RIBAVIRIN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ribavirin is a nucleoside analogue indicated in combination with interferon alfa- 2b (pegylated and nonpegylated) for the treatment of Chronic Hepatitis C (CHC) in patients 3 years of age or older with compensated liver disease. (1.1). Patients with the following characteristics are less likely to benefit from re-treatment after failing a course of therapy: previous nonresponse, previous pegylated interferon treatment, significant bridging fibrosis or cirrhosis, and genotype 1 infection.</IndicationAndUsage>
<Description>Ribavirin is a synthetic nucleoside analogue (purine analogue). The chemical name of ribavirin is 1-β-D-ribofuranosyl-1H-1,2,4-triazole-3-carboxamide and has the following structural formula (see Figure 1). Figure 1: Structural Formula. Ribavirin, USP is a white, crystalline powder. It is freely soluble in water and slightly soluble in dehydrated alcohol. The molecular formula is C8H12N4O5 and the molecular weight is 244.21. Each ribavirin capsule, USP intended for oral administration contains 200 mg of ribavirin, USP in white, hard gelatin capsule shells. In addition, each capsule contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, and silicon dioxide. The capsule shell consists of gelatin and titanium dioxide. It may also contain sodium lauryl sulfate. The capsule is printed with black pharmaceutical ink.</Description>
</NDC>
<NDC>
<NDCCode>68382-528-42</NDCCode>
<PackageDescription>378 g in 1 CAN (68382-528-42) </PackageDescription>
<NDC11Code>68382-0528-42</NDC11Code>
<ProductNDC>68382-528</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cholestyramine</ProprietaryName>
<NonProprietaryName>Cholestyramine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202901</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>CHOLESTYRAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/9g</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1) Cholestyramine for oral suspension is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for oral suspension may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine for oral suspension secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (< 4.5 mmol/L), LDL-C can be estimated using the following equation:-. LDL-C = Total cholesterol – [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine for oral suspension may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine for oral suspension therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine for oral suspension or adding other lipid-lowering agents in combination with cholestyramine for oral suspension should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine for oral suspension monotherapy has been demonstrated to retard the rate of progression2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for oral suspension is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine for oral suspension has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.</IndicationAndUsage>
<Description>Cholestyramine for oral suspension USP, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in cholestyramine for oral suspension, USP is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 9 grams of cholestyramine for oral suspension, USP. It is represented by the following structural formula. Cholestyramine for oral suspension, USP contains the following inactive ingredients: citric acid, d & c yellow # 10 aluminum lake, flavor (natural and artificial orange, natural and artificial vanilla), fd & c yellow # 6 aluminum lake, propylene glycol alginate, sucrose and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>68382-859-01</NDCCode>
<PackageDescription>100 TABLET, COATED in 1 BOTTLE (68382-859-01) </PackageDescription>
<NDC11Code>68382-0859-01</NDC11Code>
<ProductNDC>68382-859</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-859-05</NDCCode>
<PackageDescription>500 TABLET, COATED in 1 BOTTLE (68382-859-05) </PackageDescription>
<NDC11Code>68382-0859-05</NDC11Code>
<ProductNDC>68382-859</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-859-06</NDCCode>
<PackageDescription>30 TABLET, COATED in 1 BOTTLE (68382-859-06) </PackageDescription>
<NDC11Code>68382-0859-06</NDC11Code>
<ProductNDC>68382-859</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-859-16</NDCCode>
<PackageDescription>90 TABLET, COATED in 1 BOTTLE (68382-859-16) </PackageDescription>
<NDC11Code>68382-0859-16</NDC11Code>
<ProductNDC>68382-859</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-859-77</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (68382-859-77) / 1 TABLET, COATED in 1 BLISTER PACK (68382-859-30) </PackageDescription>
<NDC11Code>68382-0859-77</NDC11Code>
<ProductNDC>68382-859</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-965-01</NDCCode>
<PackageDescription>100 TABLET, COATED in 1 BOTTLE (68382-965-01) </PackageDescription>
<NDC11Code>68382-0965-01</NDC11Code>
<ProductNDC>68382-965</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-965-05</NDCCode>
<PackageDescription>500 TABLET, COATED in 1 BOTTLE (68382-965-05) </PackageDescription>
<NDC11Code>68382-0965-05</NDC11Code>
<ProductNDC>68382-965</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-965-06</NDCCode>
<PackageDescription>30 TABLET, COATED in 1 BOTTLE (68382-965-06) </PackageDescription>
<NDC11Code>68382-0965-06</NDC11Code>
<ProductNDC>68382-965</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-965-16</NDCCode>
<PackageDescription>90 TABLET, COATED in 1 BOTTLE (68382-965-16) </PackageDescription>
<NDC11Code>68382-0965-16</NDC11Code>
<ProductNDC>68382-965</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-965-77</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (68382-965-77) / 1 TABLET, COATED in 1 BLISTER PACK (68382-965-30) </PackageDescription>
<NDC11Code>68382-0965-77</NDC11Code>
<ProductNDC>68382-965</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-966-01</NDCCode>
<PackageDescription>100 TABLET, COATED in 1 BOTTLE (68382-966-01) </PackageDescription>
<NDC11Code>68382-0966-01</NDC11Code>
<ProductNDC>68382-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-966-05</NDCCode>
<PackageDescription>500 TABLET, COATED in 1 BOTTLE (68382-966-05) </PackageDescription>
<NDC11Code>68382-0966-05</NDC11Code>
<ProductNDC>68382-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-966-06</NDCCode>
<PackageDescription>30 TABLET, COATED in 1 BOTTLE (68382-966-06) </PackageDescription>
<NDC11Code>68382-0966-06</NDC11Code>
<ProductNDC>68382-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-966-16</NDCCode>
<PackageDescription>90 TABLET, COATED in 1 BOTTLE (68382-966-16) </PackageDescription>
<NDC11Code>68382-0966-16</NDC11Code>
<ProductNDC>68382-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-966-77</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (68382-966-77) / 1 TABLET, COATED in 1 BLISTER PACK (68382-966-30) </PackageDescription>
<NDC11Code>68382-0966-77</NDC11Code>
<ProductNDC>68382-966</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-967-01</NDCCode>
<PackageDescription>100 TABLET, COATED in 1 BOTTLE (68382-967-01) </PackageDescription>
<NDC11Code>68382-0967-01</NDC11Code>
<ProductNDC>68382-967</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-967-05</NDCCode>
<PackageDescription>500 TABLET, COATED in 1 BOTTLE (68382-967-05) </PackageDescription>
<NDC11Code>68382-0967-05</NDC11Code>
<ProductNDC>68382-967</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-967-06</NDCCode>
<PackageDescription>30 TABLET, COATED in 1 BOTTLE (68382-967-06) </PackageDescription>
<NDC11Code>68382-0967-06</NDC11Code>
<ProductNDC>68382-967</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-967-16</NDCCode>
<PackageDescription>90 TABLET, COATED in 1 BOTTLE (68382-967-16) </PackageDescription>
<NDC11Code>68382-0967-16</NDC11Code>
<ProductNDC>68382-967</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-967-77</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (68382-967-77) / 1 TABLET, COATED in 1 BLISTER PACK (68382-967-30) </PackageDescription>
<NDC11Code>68382-0967-77</NDC11Code>
<ProductNDC>68382-967</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-968-01</NDCCode>
<PackageDescription>100 TABLET, COATED in 1 BOTTLE (68382-968-01) </PackageDescription>
<NDC11Code>68382-0968-01</NDC11Code>
<ProductNDC>68382-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-968-05</NDCCode>
<PackageDescription>500 TABLET, COATED in 1 BOTTLE (68382-968-05) </PackageDescription>
<NDC11Code>68382-0968-05</NDC11Code>
<ProductNDC>68382-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-968-06</NDCCode>
<PackageDescription>30 TABLET, COATED in 1 BOTTLE (68382-968-06) </PackageDescription>
<NDC11Code>68382-0968-06</NDC11Code>
<ProductNDC>68382-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-968-16</NDCCode>
<PackageDescription>90 TABLET, COATED in 1 BOTTLE (68382-968-16) </PackageDescription>
<NDC11Code>68382-0968-16</NDC11Code>
<ProductNDC>68382-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>68382-968-77</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (68382-968-77) / 1 TABLET, COATED in 1 BLISTER PACK (68382-968-30) </PackageDescription>
<NDC11Code>68382-0968-77</NDC11Code>
<ProductNDC>68382-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208052</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride is indicated for: : 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies (14.1)]., 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1- ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white solid. It is slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are citric acid monohydrate, croscarmellose sodium, hypromellose, iron oxide yellow (only for 20 mg and 80 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, pregelatinised starch, poloxamer, titanium dioxide and talc.</Description>
</NDC>
<NDC>
<NDCCode>31722-529-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (31722-529-01) </PackageDescription>
<NDC11Code>31722-0529-01</NDC11Code>
<ProductNDC>31722-529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Torsemide</ProprietaryName>
<NonProprietaryName>Torsemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079234</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TORSEMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Torsemide tablets are a loop diuretic indicated for: the treatment of edema associated with heart failure, renal disease or hepatic disease. (1.1) the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.2).</IndicationAndUsage>
<Description>Torsemide is a diuretic of the pyridine-sulfonylurea class. Its chemical name is 1-isopropyl-3-[(4-m-toluidino-3-pyridyl) sulfonyl]urea and its structural formula is. Its molecular formula is C16H20N4O3S, its pKa is 6.42, and its molecular weight is 348.43. Torsemide USP is a white to off-white crystalline powder. The tablets for oral administration also contain crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose and povidone.</Description>
</NDC>
</NDCList>