{
"NDC": [
{
"NDCCode": "68387-385-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (68387-385-10)",
"NDC11Code": "68387-0385-10",
"ProductNDC": "68387-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076899",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Urinary Tract Infections. For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media. For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults. For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of a single antimicrobial agent. Shigellosis. For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis Carinii Pneumonia. For the treatment of documented Pneumocystis carinii pneumonia and for prophylaxis against Pneumocystis carinii pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing Pneumocystis carinii pneumonia. Travelers’ Diarrhea In Adults. For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.",
"Description": "Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C10H11N3O3S. It is almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3. It has the following structural formula. Inactive Ingredients: Magnesium Stearate, povidone, pregelatinized starch and sodium starch glycolate."
},
{
"NDCCode": "68387-385-14",
"PackageDescription": "14 TABLET in 1 BOTTLE, PLASTIC (68387-385-14)",
"NDC11Code": "68387-0385-14",
"ProductNDC": "68387-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076899",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Urinary Tract Infections. For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media. For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults. For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of a single antimicrobial agent. Shigellosis. For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis Carinii Pneumonia. For the treatment of documented Pneumocystis carinii pneumonia and for prophylaxis against Pneumocystis carinii pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing Pneumocystis carinii pneumonia. Travelers’ Diarrhea In Adults. For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.",
"Description": "Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C10H11N3O3S. It is almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3. It has the following structural formula. Inactive Ingredients: Magnesium Stearate, povidone, pregelatinized starch and sodium starch glycolate."
},
{
"NDCCode": "68387-385-20",
"PackageDescription": "20 TABLET in 1 BOTTLE, PLASTIC (68387-385-20)",
"NDC11Code": "68387-0385-20",
"ProductNDC": "68387-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076899",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Urinary Tract Infections. For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media. For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults. For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of a single antimicrobial agent. Shigellosis. For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis Carinii Pneumonia. For the treatment of documented Pneumocystis carinii pneumonia and for prophylaxis against Pneumocystis carinii pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing Pneumocystis carinii pneumonia. Travelers’ Diarrhea In Adults. For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.",
"Description": "Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C10H11N3O3S. It is almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3. It has the following structural formula. Inactive Ingredients: Magnesium Stearate, povidone, pregelatinized starch and sodium starch glycolate."
},
{
"NDCCode": "68387-385-30",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (68387-385-30)",
"NDC11Code": "68387-0385-30",
"ProductNDC": "68387-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076899",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Urinary Tract Infections. For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media. For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults. For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of a single antimicrobial agent. Shigellosis. For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis Carinii Pneumonia. For the treatment of documented Pneumocystis carinii pneumonia and for prophylaxis against Pneumocystis carinii pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing Pneumocystis carinii pneumonia. Travelers’ Diarrhea In Adults. For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.",
"Description": "Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C10H11N3O3S. It is almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3. It has the following structural formula. Inactive Ingredients: Magnesium Stearate, povidone, pregelatinized starch and sodium starch glycolate."
},
{
"NDCCode": "68387-100-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (68387-100-10)",
"NDC11Code": "68387-0100-10",
"ProductNDC": "68387-100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074843",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets, USP are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene Napsylate, USP is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water and soluble in methanol, ethanol, chloroform, and acetone. Chemically, it is (αS,1R)-α-[2-(Dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-napthalenesulfonic acid (1:1) monohydrate, which can be represented by the accompanying structural formula. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. Propoxyphene Napsylate and Acetaminophen Tablets, USP 50 mg/325 mgEach tablet contains: Propoxyphene Napsylate ............................50 mg (88.4 μmol) Acetaminophen .........................................325 mg (2150 μmol) In addition each tablet contains the following inactive ingredients: carnauba wax, D&C Yellow #10 Aluminum Lake, FD&C Red #40 Aluminum Lake, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide. Propoxyphene Napsylate and Acetaminophen Tablets, USP 100 mg/650 mgEach tablet contains: Propoxyphene Napsylate ...........................100 mg (176.8 μmol) Acetaminophen ..........................................650 mg (4300 μmol)In addition each tablet contains the following inactive ingredients: carnauba wax, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide. The orange tablets also contain D&C Yellow #10 Aluminum Lake and FD&C Red #40 Aluminum Lake. The pink tablets also contain FD&C Red #40 Aluminum Lake."
},
{
"NDCCode": "68387-140-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (68387-140-10)",
"NDC11Code": "68387-0140-10",
"ProductNDC": "68387-140",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20050601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076347",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Tizanidine hydrochloride is a short-acting drug for the management of spasticity. Because of the short duration of effect, treatment with tizanidine should be reserved for those daily activities and times when relief of spasticity is most important (see DOSAGE AND ADMINISTRATION).",
"Description": "Tizanidine hydrochloride is a centrally acting α2-adrenergic agonist. Tizanidine hydrochloride, USP is a white to off-white, fine crystalline powder, which is odorless or with a faint characteristic odor. Tizanidine is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiodiazole hydrochloride. Tizanidine’s molecular formula is C9H8ClN5S·HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine tablets, USP are supplied 4 mg tablets for oral administration. Tizanidine tablets are composed of the active ingredient, tizanidine hydrochloride (2.288 mg equivalent to 2 mg tizanidine base and 4.576 mg equivalent to 4 mg tizanidine base), and the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, microcrystalline cellulose, pregelatinized Starch and stearic acid."
},
{
"NDCCode": "68387-210-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (68387-210-10)",
"NDC11Code": "68387-0210-10",
"ProductNDC": "68387-210",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070824",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078558",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen Tablets, USP and other treatment options before deciding to use Ibuprofen Tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen Tablets, USP are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets, USP are indicated for relief of mild to moderate pain. Ibuprofen Tablets, USP are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets, USP in children have not been conducted.",
"Description": "Ibuprofen Tablets, USP contain the active ingredient ibuprofen, which is (±) – 2 – (p – isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77° C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen Tablets, USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch, talc, stearic acid, and titanium dioxide."
},
{
"NDCCode": "68387-230-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (68387-230-10)",
"NDC11Code": "68387-0230-10",
"ProductNDC": "68387-230",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089699",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.",
"Description": "Hydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α- Epoxy-3-methoxy-17-methylmorphinan- 6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4’-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Hydrocodone bitartrate and acetaminophen tablets, USP for oral administration are available in a variety of strength as described in the following table. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, starch, and stearic acid. Meets USP Dissolution Test 2."
},
{
"NDCCode": "68387-240-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (68387-240-10)",
"NDC11Code": "68387-0240-10",
"ProductNDC": "68387-240",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070423",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA083677",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Prednisone tablets are indicated in the following conditions. Endocrine disorders: primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, nonsuppurative thyroiditis, hypercalcemia associated with cancer. Rheumatic disorders: as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy); ankylosing spondylitis; acute and subacute bursitis; acute nonspecific tenosynovitis; acute gouty arthritis; post-traumatic osteoarthritis; synovitis of osteoarthritis; epicondylitis. Collagen diseases: during an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, acute rheumatic carditis. Dermatologic diseases: pemphigus, bullous dermatitis herpetiformis, severe erythema multiforme (Stevens-Johnson syndrome), exfoliative dermatitis, mycosis fungoides, severe seborrheic dermatitis. Allergic states: control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis, serum sickness, bronchial asthma, contact dermatitis, atopic dematitis, drug hypersensitivity reactions. Ophthalmic diseases: severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa, such as: allergic conjunctivitis, keratitis, allergic corneal marginal ulcers, herpes zoster ophthalmicus, iritis and iridocyclitis, chorioretinitis, anterior segment inflammation, diffuse posterior uveitis and choroiditis, optic neuritis, sympathetic ophthalmia. Respiratory diseases: symptomatic sarcoidosis, Loeffler's syndrome not manageable by other means, berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, aspiration pneumonitis. Hematologic disorders: Idiopathic thrombocytopenic purpura in adults, secondary thrombocytopenia in adults, acquired (autoimmune) hemolytic anemia, eythroblastopenia (RBC anemia), congenital (erythroid) hypoplastic anemia. Neoplastic diseases: for palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous states: to induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal diseases: to tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. Miscellaneous: tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy, trichinosis with neurologic or myocardial involvement. In addition to the above indications, prednisone tablets are indicated for systemic dermatomyositis (polymyositis).",
"Description": "Prednisone is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, that are readily absorbed from the gastrointestinal tract. The formula for prednisone is C21H26O5. Chemically, it is 17,21-dihydroxypregna-1, 4-diene-3,11, 20-trione and has the following structural formula. Prednisone is a white to practically white, odorless, crystalline powder and has a molecular weight of 358.43. It melts at about 230°C with some decomposition. Prednisone is very slightly soluble in water, slightly soluble in alcohol, chloroform, dioxane, and methanol. Each tablet, for oral administration, contains 5 mg, 10 mg, and 20 mg prednisone. Inactive ingredients are as follows: 1 5 mg: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc., 2 10 mg: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc., 3 20 mg: anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "68387-500-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (68387-500-10)",
"NDC11Code": "68387-0500-10",
"ProductNDC": "68387-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060824",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine, hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "68387-521-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (68387-521-10)",
"NDC11Code": "68387-0521-10",
"ProductNDC": "68387-521",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20101210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076063",
"LabelerName": "Keltman Pharmaceuticals Inc.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lisinopril Tablets are indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N 2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril Tablets are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive ingredients are as follows. 2.5 mg: Corn Starch, Colloidal Silicon Dioxide, Dibasic Calcium Phosphate, Magnesium Stearate, Mannitol, and Sodium Starch Glycolate. 5 mg, 10 mg, 20 mg and 30 mg: Corn Starch, Colloidal Silicon Dioxide, Dibasic Calcium Phosphate, Magnesium Stearate, Mannitol, Red Iron Oxide, and Sodium Starch Glycolate. 40 mg: Corn Starch, Colloidal Silicon Dioxide, Dibasic Calcium Phosphate, Magnesium Stearate, Mannitol, Sodium Starch Glycolate, and Yellow Iron Oxide."
},
{
"NDCCode": "14141-385-01",
"PackageDescription": "1 CASE in 1 BOX (14141-385-01) / 10 g in 1 CASE",
"NDC11Code": "14141-0385-01",
"ProductNDC": "14141-385",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lbel Divine Double Use Longwear 36h Spf 15 Almendra 230",
"NonProprietaryName": "Octinoxate, Zinc Oxide",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250304",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "BELSTAR S.A.",
"SubstanceName": "OCTINOXATE; ZINC OXIDE",
"StrengthNumber": "30; 49",
"StrengthUnit": "mg/g; mg/g",
"Status": "Active",
"LastUpdate": "2025-03-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250304",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "33342-385-10",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (33342-385-10) ",
"NDC11Code": "33342-0385-10",
"ProductNDC": "33342-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Silodosin",
"NonProprietaryName": "Silodosin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20181203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211166",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "SILODOSIN",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181203",
"SamplePackage": "N",
"IndicationAndUsage": "Silodosin, a selective alpha-1 adrenergic receptor antagonist, is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES (14)]. Silodosin is not indicated for the treatment of hypertension.",
"Description": "Silodosin is a selective antagonist of alpha-1 adrenoreceptors. The chemical name of silodosin is (R)-1-(3-hydroxypropyl)-5-(2-(2-(2-(2,2,2-trifluoroethoxy)phenoxy)ethylamino)propyl) indoline-7-carboxamide and the molecular formula is C25H32F3N3O4 with a molecular weight of 495.53. The structural formula of silodosin is. Silodosin is a white to pale yellowish colour powder that melts at approximately 105 to 109°C. It is very soluble in acetic acid, freely soluble in alcohol, and very slightly soluble in water. Each silodosin 8 mg capsule for oral administration contains 8 mg silodosin, and the following inactive ingredients: mannitol, magnesium stearate, pregelatinized starch (maize), and sodium lauryl sulfate. The size #1 hard gelatin capsules contain gelatin, titanium dioxide and sodium lauryl sulfate. The capsules are printed with edible ink containing shellac, propylene glycol, FD&C Blue No. 1 Aluminum Lake and yellow iron oxide. Each silodosin 4 mg capsule for oral administration contains 4 mg silodosin, and the following inactive ingredients: mannitol, magnesium stearate, pregelatinized starch (maize), and sodium lauryl sulfate. The size #3 hard gelatin capsules contain gelatin, titanium dioxide and sodium lauryl sulfate. The capsules are printed with edible ink containing shellac, propylene glycol and yellow iron oxide."
},
{
"NDCCode": "33342-385-12",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (33342-385-12) > 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "33342-0385-12",
"ProductNDC": "33342-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Silodosin",
"NonProprietaryName": "Silodosin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20181203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211166",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "SILODOSIN",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181203",
"SamplePackage": "N",
"IndicationAndUsage": "Silodosin, a selective alpha-1 adrenergic receptor antagonist, is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES (14)]. Silodosin is not indicated for the treatment of hypertension.",
"Description": "Silodosin is a selective antagonist of alpha-1 adrenoreceptors. The chemical name of silodosin is (R)-1-(3-hydroxypropyl)-5-(2-(2-(2-(2,2,2-trifluoroethoxy)phenoxy)ethylamino)propyl) indoline-7-carboxamide and the molecular formula is C25H32F3N3O4 with a molecular weight of 495.53. The structural formula of silodosin is. Silodosin is a white to pale yellowish colour powder that melts at approximately 105 to 109°C. It is very soluble in acetic acid, freely soluble in alcohol, and very slightly soluble in water. Each silodosin 8 mg capsule for oral administration contains 8 mg silodosin, and the following inactive ingredients: mannitol, magnesium stearate, pregelatinized starch (maize), and sodium lauryl sulfate. The size #1 hard gelatin capsules contain gelatin, titanium dioxide and sodium lauryl sulfate. The capsules are printed with edible ink containing shellac, propylene glycol, FD&C Blue No. 1 Aluminum Lake and yellow iron oxide. Each silodosin 4 mg capsule for oral administration contains 4 mg silodosin, and the following inactive ingredients: mannitol, magnesium stearate, pregelatinized starch (maize), and sodium lauryl sulfate. The size #3 hard gelatin capsules contain gelatin, titanium dioxide and sodium lauryl sulfate. The capsules are printed with edible ink containing shellac, propylene glycol and yellow iron oxide."
},
{
"NDCCode": "43547-385-10",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (43547-385-10) ",
"NDC11Code": "43547-0385-10",
"ProductNDC": "43547-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160930",
"EndMarketingDate": "20220710",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204989",
"LabelerName": "Solco Healthcare U.S., LLC",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-07-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160930",
"EndMarketingDatePackage": "20220710",
"SamplePackage": "N"
},
{
"NDCCode": "46708-385-10",
"PackageDescription": "100 TABLET in 1 CARTON (46708-385-10) ",
"NDC11Code": "46708-0385-10",
"ProductNDC": "46708-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Modafinil",
"NonProprietaryName": "Modafinil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202700",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "MODAFINIL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulation [PE], Increased Sympathetic Activity [PE], Sympathomimetic-like Agent [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170630",
"SamplePackage": "N",
"IndicationAndUsage": "Modafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with narcolepsy, obstructive sleep apnea (OSA), or shift work disorder (SWD). Limitations of Use. In OSA, modafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating and during treatment with modafinil tablets for excessive sleepiness.",
"Description": "Modafinil tablets are a wakefulness-promoting agent for oral administration. Modafinil is a racemic compound. The chemical name for modafinil is 2-[(diphenylmethyl)sulfinyl]acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35. The chemical structure is. Modafinil is a white to off-white, crystalline powder that is practically insoluble in water and cyclohexane. It is sparingly to slightly soluble in methanol and acetone. Modafinil tablets USP contain 100 mg or 200 mg of modafinil USP and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, mannitol and magnesium stearate."
},
{
"NDCCode": "49643-385-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49643-385-10) ",
"NDC11Code": "49643-0385-10",
"ProductNDC": "49643-385",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Canary Grass Pollen",
"NonProprietaryName": "Phalaris Arundinaceae",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "PHALARIS ARUNDINACEA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "52685-385-10",
"PackageDescription": "1 CONTAINER in 1 CARTON (52685-385-10) > 34.48 g in 1 CONTAINER",
"NDC11Code": "52685-0385-10",
"ProductNDC": "52685-385",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cle De Peau Beaute Refining Fluid Foundation",
"ProprietaryNameSuffix": "O30",
"NonProprietaryName": "Octinoxate",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20080201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "SHISEIDO CO., LTD.",
"SubstanceName": "OCTINOXATE",
"StrengthNumber": "1690",
"StrengthUnit": "mg/34.48g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "52817-385-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (52817-385-10) ",
"NDC11Code": "52817-0385-10",
"ProductNDC": "52817-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glipizide",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231003",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214874",
"LabelerName": "TruPharma LLC",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2023-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231003",
"SamplePackage": "N",
"IndicationAndUsage": "Glipizide tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Glipizide is an oral blood-glucose-lowering drug of the sulfonylurea class. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazine-carboxamido)ethyl]phenyl]sulfonyl]urea. The molecular formula is C 21H 27N 5O 4S; the molecular weight is 445.55; the structural formula is shown below:. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 NNaOH; it is freely soluble in dimethylformamide. Glipizide tablets for oral use are available in 2.5 mg, 5mg and 10 mg strengths. Inactive ingredients are: colloidal silicon dioxide; croscarmellose sodium, lactose anhydrous; microcrystalline cellulose and stearic acid. Meets USP Dissolution test 2."
},
{
"NDCCode": "54575-385-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-385-10)",
"NDC11Code": "54575-0385-10",
"ProductNDC": "54575-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cucumber",
"NonProprietaryName": "Cucumber",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "CUCUMBER",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "55150-385-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (55150-385-01) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "55150-0385-01",
"ProductNDC": "55150-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRA-ARTICULAR; INTRAMUSCULAR; SOFT TISSUE",
"StartMarketingDate": "20220705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212400",
"LabelerName": "Eugia US LLC",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220705",
"SamplePackage": "N",
"IndicationAndUsage": "Intramuscular Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension is indicated for intramuscular use as follows: Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus. Intra-Articular The intra-articular or soft tissue administration of triamcinolone acetonide injectable suspension is indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis, acute and subacute bursitis, acute nonspecific tenosynovitis, epicondylitis, rheumatoid arthritis, synovitis of osteoarthritis.",
"Description": "Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Triamcinolone acetonide injectable suspension, USP: Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is: Triamcinolone acetonide, USP occurs as a white or almost-white, crystalline powder, practically insoluble in water, sparingly soluble in ethanol, methanol and chloroform, very slightly soluble in ether."
},
{
"NDCCode": "59368-385-01",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (59368-385-01) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "59368-0385-01",
"ProductNDC": "59368-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Micardis Hct",
"NonProprietaryName": "Telmisartan And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20001201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021162",
"LabelerName": "Praxis, LLC",
"SubstanceName": "HYDROCHLOROTHIAZIDE; TELMISARTAN",
"StrengthNumber": "12.5; 80",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-07-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20001201",
"SamplePackage": "N",
"Description": "MICARDIS HCT tablets are a combination of telmisartan, an orally active angiotensin II antagonist acting on the AT 1receptor subtype, and hydrochlorothiazide, a thiazide diuretic. Telmisartan, a non-peptide molecule, is chemically described as 4'-[(1,4'-dimethyl-2'-propyl[2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33H 30N 4O 2, its molecular weight is 514.63, and its structural formula is:. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Hydrochlorothiazide is a white, or practically white, practically odorless, crystalline powder with a molecular weight of 297.74. It is slightly soluble in water, and freely soluble in sodium hydroxide solution. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C 7H 8ClN 3O 4S 2, and its structural formula is:. MICARDIS HCT tablets are formulated for oral administration in three combinations of 40 mg/12.5 mg, 80 mg/12.5 mg, and 80 mg/25 mg telmisartan and hydrochlorothiazide, respectively. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, sorbitol, magnesium stearate, lactose monohydrate, microcrystalline cellulose, maize starch, and sodium starch glycolate. As coloring agents, the 40 mg/12.5 mg and 80 mg/12.5 mg tablets contain ferric oxide red, and the 80 mg/25 mg tablets contain ferric oxide yellow. MICARDIS HCT tablets are hygroscopic and require protection from moisture."
},
{
"NDCCode": "59746-385-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (59746-385-10) ",
"NDC11Code": "59746-0385-10",
"ProductNDC": "59746-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Terazosin",
"NonProprietaryName": "Terazosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20041220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075317",
"LabelerName": "Jubilant Cadista Pharmaceuticals Inc.",
"SubstanceName": "TERAZOSIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20041220",
"SamplePackage": "N",
"IndicationAndUsage": "Terazosin capsules are indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH). There is a rapid response, with approximately 70% of patients experiencing an increase in urinary flow and improvement in symptoms of BPH when treated with terazosin capsules. The long-term effects of terazosin capsules on the incidence of surgery, acute urinary obstruction or other complications of BPH are yet to be determined. Terazosin capsules are also indicated for the treatment of hypertension. Terazosin capsules can be used alone or in combination with other antihypertensive agents such as diuretics or beta-adrenergic blocking agents.",
"Description": "Terazosin hydrochloride, an alpha-1-selective adrenoceptor blocking agent, is a quinazoline derivative represented by the following chemical name,molecular formula and structural formula: (RS)-Piperazine, 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-[(tetrahydro-2-furanyl)carbonyl]-, monohydrochloride.C19H26ClN5O4. Terazosin hydrochloride is a white, crystalline substance, freely soluble in water and isotonic saline and has a molecular weight of 423.93. Each capsule, for oral administration, contains 1 mg, 2 mg, 5 mg or 10 mg of terazosin as terazosin hydrochlolde. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and pregelatinized starch. The gelatin capsule contains gelatin, silicon dioxide, sodium lauryl sulfate, and titanium dioxide. The 1 mg shell also contains black iron oxide; the 2 mg capsule shell also contains D&C Yellow #10; the 5 mg capsule shell also contains D&C Yellow #10, FD&C Red #40 and D&C Red #28; the 10 mg capsule shell also contains FD&C Green #3 and D&C Yellow#10."
},
{
"NDCCode": "59779-385-03",
"PackageDescription": "10 mL in 1 BOTTLE, WITH APPLICATOR (59779-385-03) ",
"NDC11Code": "59779-0385-03",
"ProductNDC": "59779-385",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Benzethonium Chloride Plus Dyclonine Hydrochloride",
"NonProprietaryName": "Liquid Bandage",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140710",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "CVS Pharmacy",
"SubstanceName": "BENZETHONIUM CHLORIDE; DYCLONINE HYDROCHLORIDE",
"StrengthNumber": ".2; .75",
"StrengthUnit": "mg/10mL; mg/10mL",
"Status": "Active",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140710",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent infection in minor cuts, scrapes, and burns. I first aid for the temporary relief of pain in minor cuts, scrapes, and burns."
},
{
"NDCCode": "62332-385-10",
"PackageDescription": "100 TABLET in 1 CARTON (62332-385-10) ",
"NDC11Code": "62332-0385-10",
"ProductNDC": "62332-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Modafinil",
"NonProprietaryName": "Modafinil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202700",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "MODAFINIL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulation [PE], Increased Sympathetic Activity [PE], Sympathomimetic-like Agent [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2021-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170630",
"SamplePackage": "N",
"IndicationAndUsage": "Modafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with narcolepsy, obstructive sleep apnea (OSA), or shift work disorder (SWD). Limitations of Use. In OSA, modafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating and during treatment with modafinil tablets for excessive sleepiness.",
"Description": "Modafinil tablets are a wakefulness-promoting agent for oral administration. Modafinil is a racemic compound. The chemical name for modafinil is 2-[(diphenylmethyl)sulfinyl]acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35. The chemical structure is. Modafinil is a white to off-white, crystalline powder that is practically insoluble in water and cyclohexane. It is sparingly to slightly soluble in methanol and acetone. Modafinil tablets USP contain 100 mg or 200 mg of modafinil USP and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, mannitol and magnesium stearate."
},
{
"NDCCode": "63323-385-10",
"PackageDescription": "10 VIAL in 1 CARTON (63323-385-10) / 10 mL in 1 VIAL (63323-385-01) ",
"NDC11Code": "63323-0385-10",
"ProductNDC": "63323-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotetan",
"NonProprietaryName": "Cefotetan Disodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20091118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065374",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CEFOTETAN DISODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/10mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2025-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091118",
"SamplePackage": "N",
"Description": "Cefotetan for Injection, USP, as cefotetan disodium, is a sterile, semisynthetic, broad-spectrum, beta-lactamase resistant, cephalosporin (cephamycin) antibacterial for parenteral administration. It is the disodium salt of [6R-(6α,7α)]-7-[[[4-(2-amino-1-carboxy-2-oxoethylidene)-1,3-dithietan-2-yl]carbonyl]amino]-7-methoxy-3-[[(1-methyl-1H-tetrazol-5-yl)thio]methyl]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Structural formula:. Cefotetan for Injection, USP is supplied in vials containing 80 mg (3.5 mEq) of sodium per gram of cefotetan activity. It is a white to pale yellow powder which is very soluble in water. Reconstituted solutions of Cefotetan for Injection, USP are intended for intravenous and intramuscular administration. The solution varies from colorless to yellow depending on the concentration. The pH of freshly reconstituted solutions is usually between 4.5 to 6.5. Cefotetan for Injection, USP is available in two vial strengths. Each 1 gram vial contains cefotetan disodium equivalent to 1 gram cefotetan activity. Each 2 gram vial contains cefotetan disodium equivalent to 2 grams cefotetan activity."
},
{
"NDCCode": "65219-385-10",
"PackageDescription": "10 VIAL in 1 CARTON (65219-385-10) / 10 mL in 1 VIAL (65219-385-01) ",
"NDC11Code": "65219-0385-10",
"ProductNDC": "65219-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216021",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250131",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole Sodium for Injection is a proton pump inhibitor (PPI) indicated in adults for the following: : 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of erosive esophagitis (EE). (1.1), 2 Pathological hypersecretion conditions, including Zollinger-Ellison (ZE) syndrome. (1.2).",
"Description": "The active ingredient in Pantoprazole Sodium for Injection, a PPI, is 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl) methyl]sulfinyl]-1H-benzimidazole, sodium salt, hydrate (2:3), a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, 11/2 H2O, with a molecular weight of 432.4. The structural formula is. Pantoprazole sodium, USP is a white to almost white powder and is racemic. Pantoprazole sodium is freely soluble in water and in ethyl alcohol, and practically insoluble in hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of Pantoprazole Sodium for Injection is in the pH range 9.5 to 11.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile white to off-white cake or powder in a single-dose clear flint tubing glass vial, stoppered with lyo rubber closure, sealed with aluminum flip-off overseal. Each vial contains 40 mg pantoprazole (45.1 mg pantoprazole sodium, USP equivalent to 40 mg pantoprazole), and sodium hydroxide to adjust pH."
},
{
"NDCCode": "67457-385-99",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (67457-385-99) / 10 mL in 1 VIAL, MULTI-DOSE (67457-385-10) ",
"NDC11Code": "67457-0385-99",
"ProductNDC": "67457-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20180316",
"EndMarketingDate": "20260731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203851",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "1000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180316",
"EndMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin sodium injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease; , 3 Atrial fibrillation with embolization; , 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation); , 5 Prevention of clotting in arterial and cardiac surgery; , 6 Prophylaxis and treatment of peripheral arterial embolism. , 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium, USP (representative subunits):. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations/mL:. pH 5.0 to 7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment."
},
{
"NDCCode": "69423-385-10",
"PackageDescription": "107 g in 1 CAN (69423-385-10) ",
"NDC11Code": "69423-0385-10",
"ProductNDC": "69423-385",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Old Spice Sweat Defense Ultimate Captain Dry",
"NonProprietaryName": "Aluminum Chlorohydrate",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190901",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "M019",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "ALUMINUM CHLOROHYDRATE",
"StrengthNumber": "23.5",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190901",
"SamplePackage": "N",
"IndicationAndUsage": "reduces underarm wetness."
},
{
"NDCCode": "71919-385-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-385-10) ",
"NDC11Code": "71919-0385-10",
"ProductNDC": "71919-385",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kali Nitricum",
"NonProprietaryName": "Potassium Nitrate",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20101029",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "POTASSIUM NITRATE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20101029",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68387-385-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (68387-385-10)</PackageDescription>
<NDC11Code>68387-0385-10</NDC11Code>
<ProductNDC>68387-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076899</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Urinary Tract Infections. For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media. For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults. For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of a single antimicrobial agent. Shigellosis. For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis Carinii Pneumonia. For the treatment of documented Pneumocystis carinii pneumonia and for prophylaxis against Pneumocystis carinii pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing Pneumocystis carinii pneumonia. Travelers’ Diarrhea In Adults. For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.</IndicationAndUsage>
<Description>Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C10H11N3O3S. It is almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3. It has the following structural formula. Inactive Ingredients: Magnesium Stearate, povidone, pregelatinized starch and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>68387-385-14</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE, PLASTIC (68387-385-14)</PackageDescription>
<NDC11Code>68387-0385-14</NDC11Code>
<ProductNDC>68387-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076899</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Urinary Tract Infections. For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media. For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults. For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of a single antimicrobial agent. Shigellosis. For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis Carinii Pneumonia. For the treatment of documented Pneumocystis carinii pneumonia and for prophylaxis against Pneumocystis carinii pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing Pneumocystis carinii pneumonia. Travelers’ Diarrhea In Adults. For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.</IndicationAndUsage>
<Description>Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C10H11N3O3S. It is almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3. It has the following structural formula. Inactive Ingredients: Magnesium Stearate, povidone, pregelatinized starch and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>68387-385-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE, PLASTIC (68387-385-20)</PackageDescription>
<NDC11Code>68387-0385-20</NDC11Code>
<ProductNDC>68387-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076899</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Urinary Tract Infections. For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media. For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults. For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of a single antimicrobial agent. Shigellosis. For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis Carinii Pneumonia. For the treatment of documented Pneumocystis carinii pneumonia and for prophylaxis against Pneumocystis carinii pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing Pneumocystis carinii pneumonia. Travelers’ Diarrhea In Adults. For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.</IndicationAndUsage>
<Description>Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C10H11N3O3S. It is almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3. It has the following structural formula. Inactive Ingredients: Magnesium Stearate, povidone, pregelatinized starch and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>68387-385-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (68387-385-30)</PackageDescription>
<NDC11Code>68387-0385-30</NDC11Code>
<ProductNDC>68387-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076899</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [CS],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Urinary Tract Infections. For the treatment of urinary tract infections due to susceptible strains of the following organisms: Escherichia coli, Klebsiella species, Enterobacter species, Morganella morganii, Proteus mirabilis and Proteus vulgaris. It is recommended that initial episodes of uncomplicated urinary tract infections be treated with a single effective antibacterial agent rather than the combination. Acute Otitis Media. For the treatment of acute otitis media in pediatric patients due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of other antimicrobial agents. To date, there are limited data on the safety of repeated use of sulfamethoxazole and trimethoprim in pediatric patients under two years of age. Sulfamethoxazole and trimethoprim is not indicated for prophylactic or prolonged administration in otitis media at any age. Acute Exacerbations of Chronic Bronchitis in Adults. For the treatment of acute exacerbations of chronic bronchitis due to susceptible strains of Streptococcus pneumoniae or Haemophilus influenzae when in the judgment of the physician sulfamethoxazole and trimethoprim offers some advantage over the use of a single antimicrobial agent. Shigellosis. For the treatment of enteritis caused by susceptible strains of Shigella flexneri and Shigella sonnei when antibacterial therapy is indicated. Pneumocystis Carinii Pneumonia. For the treatment of documented Pneumocystis carinii pneumonia and for prophylaxis against Pneumocystis carinii pneumonia in individuals who are immunosuppressed and considered to be at an increased risk of developing Pneumocystis carinii pneumonia. Travelers’ Diarrhea In Adults. For the treatment of traveler’s diarrhea due to susceptible strains of enterotoxigenic E. coli.</IndicationAndUsage>
<Description>Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C10H11N3O3S. It is almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C14H18N4O3. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3. It has the following structural formula. Inactive Ingredients: Magnesium Stearate, povidone, pregelatinized starch and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>68387-100-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (68387-100-10)</PackageDescription>
<NDC11Code>68387-0100-10</NDC11Code>
<ProductNDC>68387-100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074843</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets, USP are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene Napsylate, USP is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water and soluble in methanol, ethanol, chloroform, and acetone. Chemically, it is (αS,1R)-α-[2-(Dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-napthalenesulfonic acid (1:1) monohydrate, which can be represented by the accompanying structural formula. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. Propoxyphene Napsylate and Acetaminophen Tablets, USP 50 mg/325 mgEach tablet contains: Propoxyphene Napsylate ............................50 mg (88.4 μmol) Acetaminophen .........................................325 mg (2150 μmol) In addition each tablet contains the following inactive ingredients: carnauba wax, D&C Yellow #10 Aluminum Lake, FD&C Red #40 Aluminum Lake, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide. Propoxyphene Napsylate and Acetaminophen Tablets, USP 100 mg/650 mgEach tablet contains: Propoxyphene Napsylate ...........................100 mg (176.8 μmol) Acetaminophen ..........................................650 mg (4300 μmol)In addition each tablet contains the following inactive ingredients: carnauba wax, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide. The orange tablets also contain D&C Yellow #10 Aluminum Lake and FD&C Red #40 Aluminum Lake. The pink tablets also contain FD&C Red #40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>68387-140-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (68387-140-10)</PackageDescription>
<NDC11Code>68387-0140-10</NDC11Code>
<ProductNDC>68387-140</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076347</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tizanidine hydrochloride is a short-acting drug for the management of spasticity. Because of the short duration of effect, treatment with tizanidine should be reserved for those daily activities and times when relief of spasticity is most important (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Tizanidine hydrochloride is a centrally acting α2-adrenergic agonist. Tizanidine hydrochloride, USP is a white to off-white, fine crystalline powder, which is odorless or with a faint characteristic odor. Tizanidine is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiodiazole hydrochloride. Tizanidine’s molecular formula is C9H8ClN5S·HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine tablets, USP are supplied 4 mg tablets for oral administration. Tizanidine tablets are composed of the active ingredient, tizanidine hydrochloride (2.288 mg equivalent to 2 mg tizanidine base and 4.576 mg equivalent to 4 mg tizanidine base), and the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, microcrystalline cellulose, pregelatinized Starch and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>68387-210-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (68387-210-10)</PackageDescription>
<NDC11Code>68387-0210-10</NDC11Code>
<ProductNDC>68387-210</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070824</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078558</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen Tablets, USP and other treatment options before deciding to use Ibuprofen Tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen Tablets, USP are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets, USP are indicated for relief of mild to moderate pain. Ibuprofen Tablets, USP are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets, USP in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen Tablets, USP contain the active ingredient ibuprofen, which is (±) – 2 – (p – isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77° C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen Tablets, USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch, talc, stearic acid, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68387-230-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (68387-230-10)</PackageDescription>
<NDC11Code>68387-0230-10</NDC11Code>
<ProductNDC>68387-230</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089699</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>Hydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α- Epoxy-3-methoxy-17-methylmorphinan- 6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4’-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Hydrocodone bitartrate and acetaminophen tablets, USP for oral administration are available in a variety of strength as described in the following table. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, starch, and stearic acid. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>68387-240-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (68387-240-10)</PackageDescription>
<NDC11Code>68387-0240-10</NDC11Code>
<ProductNDC>68387-240</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070423</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA083677</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prednisone tablets are indicated in the following conditions. Endocrine disorders: primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, nonsuppurative thyroiditis, hypercalcemia associated with cancer. Rheumatic disorders: as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy); ankylosing spondylitis; acute and subacute bursitis; acute nonspecific tenosynovitis; acute gouty arthritis; post-traumatic osteoarthritis; synovitis of osteoarthritis; epicondylitis. Collagen diseases: during an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, acute rheumatic carditis. Dermatologic diseases: pemphigus, bullous dermatitis herpetiformis, severe erythema multiforme (Stevens-Johnson syndrome), exfoliative dermatitis, mycosis fungoides, severe seborrheic dermatitis. Allergic states: control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis, serum sickness, bronchial asthma, contact dermatitis, atopic dematitis, drug hypersensitivity reactions. Ophthalmic diseases: severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa, such as: allergic conjunctivitis, keratitis, allergic corneal marginal ulcers, herpes zoster ophthalmicus, iritis and iridocyclitis, chorioretinitis, anterior segment inflammation, diffuse posterior uveitis and choroiditis, optic neuritis, sympathetic ophthalmia. Respiratory diseases: symptomatic sarcoidosis, Loeffler's syndrome not manageable by other means, berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, aspiration pneumonitis. Hematologic disorders: Idiopathic thrombocytopenic purpura in adults, secondary thrombocytopenia in adults, acquired (autoimmune) hemolytic anemia, eythroblastopenia (RBC anemia), congenital (erythroid) hypoplastic anemia. Neoplastic diseases: for palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous states: to induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal diseases: to tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. Miscellaneous: tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy, trichinosis with neurologic or myocardial involvement. In addition to the above indications, prednisone tablets are indicated for systemic dermatomyositis (polymyositis).</IndicationAndUsage>
<Description>Prednisone is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, that are readily absorbed from the gastrointestinal tract. The formula for prednisone is C21H26O5. Chemically, it is 17,21-dihydroxypregna-1, 4-diene-3,11, 20-trione and has the following structural formula. Prednisone is a white to practically white, odorless, crystalline powder and has a molecular weight of 358.43. It melts at about 230°C with some decomposition. Prednisone is very slightly soluble in water, slightly soluble in alcohol, chloroform, dioxane, and methanol. Each tablet, for oral administration, contains 5 mg, 10 mg, and 20 mg prednisone. Inactive ingredients are as follows: 1 5 mg: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc., 2 10 mg: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc., 3 20 mg: anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>68387-500-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (68387-500-10)</PackageDescription>
<NDC11Code>68387-0500-10</NDC11Code>
<ProductNDC>68387-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060824</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d]cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine, hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68387-521-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (68387-521-10)</PackageDescription>
<NDC11Code>68387-0521-10</NDC11Code>
<ProductNDC>68387-521</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076063</ApplicationNumber>
<LabelerName>Keltman Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril Tablets are indicated for the treatment of hypertension. It may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N 2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril Tablets are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive ingredients are as follows. 2.5 mg: Corn Starch, Colloidal Silicon Dioxide, Dibasic Calcium Phosphate, Magnesium Stearate, Mannitol, and Sodium Starch Glycolate. 5 mg, 10 mg, 20 mg and 30 mg: Corn Starch, Colloidal Silicon Dioxide, Dibasic Calcium Phosphate, Magnesium Stearate, Mannitol, Red Iron Oxide, and Sodium Starch Glycolate. 40 mg: Corn Starch, Colloidal Silicon Dioxide, Dibasic Calcium Phosphate, Magnesium Stearate, Mannitol, Sodium Starch Glycolate, and Yellow Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>14141-385-01</NDCCode>
<PackageDescription>1 CASE in 1 BOX (14141-385-01) / 10 g in 1 CASE</PackageDescription>
<NDC11Code>14141-0385-01</NDC11Code>
<ProductNDC>14141-385</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lbel Divine Double Use Longwear 36h Spf 15 Almendra 230</ProprietaryName>
<NonProprietaryName>Octinoxate, Zinc Oxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250304</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>BELSTAR S.A.</LabelerName>
<SubstanceName>OCTINOXATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>30; 49</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-03-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>33342-385-10</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (33342-385-10) </PackageDescription>
<NDC11Code>33342-0385-10</NDC11Code>
<ProductNDC>33342-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Silodosin</ProprietaryName>
<NonProprietaryName>Silodosin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211166</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>SILODOSIN</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Silodosin, a selective alpha-1 adrenergic receptor antagonist, is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES (14)]. Silodosin is not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>Silodosin is a selective antagonist of alpha-1 adrenoreceptors. The chemical name of silodosin is (R)-1-(3-hydroxypropyl)-5-(2-(2-(2-(2,2,2-trifluoroethoxy)phenoxy)ethylamino)propyl) indoline-7-carboxamide and the molecular formula is C25H32F3N3O4 with a molecular weight of 495.53. The structural formula of silodosin is. Silodosin is a white to pale yellowish colour powder that melts at approximately 105 to 109°C. It is very soluble in acetic acid, freely soluble in alcohol, and very slightly soluble in water. Each silodosin 8 mg capsule for oral administration contains 8 mg silodosin, and the following inactive ingredients: mannitol, magnesium stearate, pregelatinized starch (maize), and sodium lauryl sulfate. The size #1 hard gelatin capsules contain gelatin, titanium dioxide and sodium lauryl sulfate. The capsules are printed with edible ink containing shellac, propylene glycol, FD&C Blue No. 1 Aluminum Lake and yellow iron oxide. Each silodosin 4 mg capsule for oral administration contains 4 mg silodosin, and the following inactive ingredients: mannitol, magnesium stearate, pregelatinized starch (maize), and sodium lauryl sulfate. The size #3 hard gelatin capsules contain gelatin, titanium dioxide and sodium lauryl sulfate. The capsules are printed with edible ink containing shellac, propylene glycol and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>33342-385-12</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (33342-385-12) > 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>33342-0385-12</NDC11Code>
<ProductNDC>33342-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Silodosin</ProprietaryName>
<NonProprietaryName>Silodosin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211166</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>SILODOSIN</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Silodosin, a selective alpha-1 adrenergic receptor antagonist, is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES (14)]. Silodosin is not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>Silodosin is a selective antagonist of alpha-1 adrenoreceptors. The chemical name of silodosin is (R)-1-(3-hydroxypropyl)-5-(2-(2-(2-(2,2,2-trifluoroethoxy)phenoxy)ethylamino)propyl) indoline-7-carboxamide and the molecular formula is C25H32F3N3O4 with a molecular weight of 495.53. The structural formula of silodosin is. Silodosin is a white to pale yellowish colour powder that melts at approximately 105 to 109°C. It is very soluble in acetic acid, freely soluble in alcohol, and very slightly soluble in water. Each silodosin 8 mg capsule for oral administration contains 8 mg silodosin, and the following inactive ingredients: mannitol, magnesium stearate, pregelatinized starch (maize), and sodium lauryl sulfate. The size #1 hard gelatin capsules contain gelatin, titanium dioxide and sodium lauryl sulfate. The capsules are printed with edible ink containing shellac, propylene glycol, FD&C Blue No. 1 Aluminum Lake and yellow iron oxide. Each silodosin 4 mg capsule for oral administration contains 4 mg silodosin, and the following inactive ingredients: mannitol, magnesium stearate, pregelatinized starch (maize), and sodium lauryl sulfate. The size #3 hard gelatin capsules contain gelatin, titanium dioxide and sodium lauryl sulfate. The capsules are printed with edible ink containing shellac, propylene glycol and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>43547-385-10</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (43547-385-10) </PackageDescription>
<NDC11Code>43547-0385-10</NDC11Code>
<ProductNDC>43547-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160930</StartMarketingDate>
<EndMarketingDate>20220710</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204989</ApplicationNumber>
<LabelerName>Solco Healthcare U.S., LLC</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-07-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160930</StartMarketingDatePackage>
<EndMarketingDatePackage>20220710</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>46708-385-10</NDCCode>
<PackageDescription>100 TABLET in 1 CARTON (46708-385-10) </PackageDescription>
<NDC11Code>46708-0385-10</NDC11Code>
<ProductNDC>46708-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Modafinil</ProprietaryName>
<NonProprietaryName>Modafinil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202700</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>MODAFINIL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulation [PE], Increased Sympathetic Activity [PE], Sympathomimetic-like Agent [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Modafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with narcolepsy, obstructive sleep apnea (OSA), or shift work disorder (SWD). Limitations of Use. In OSA, modafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating and during treatment with modafinil tablets for excessive sleepiness.</IndicationAndUsage>
<Description>Modafinil tablets are a wakefulness-promoting agent for oral administration. Modafinil is a racemic compound. The chemical name for modafinil is 2-[(diphenylmethyl)sulfinyl]acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35. The chemical structure is. Modafinil is a white to off-white, crystalline powder that is practically insoluble in water and cyclohexane. It is sparingly to slightly soluble in methanol and acetone. Modafinil tablets USP contain 100 mg or 200 mg of modafinil USP and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, mannitol and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>49643-385-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49643-385-10) </PackageDescription>
<NDC11Code>49643-0385-10</NDC11Code>
<ProductNDC>49643-385</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Canary Grass Pollen</ProprietaryName>
<NonProprietaryName>Phalaris Arundinaceae</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>PHALARIS ARUNDINACEA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>52685-385-10</NDCCode>
<PackageDescription>1 CONTAINER in 1 CARTON (52685-385-10) > 34.48 g in 1 CONTAINER</PackageDescription>
<NDC11Code>52685-0385-10</NDC11Code>
<ProductNDC>52685-385</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cle De Peau Beaute Refining Fluid Foundation</ProprietaryName>
<ProprietaryNameSuffix>O30</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20080201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>SHISEIDO CO., LTD.</LabelerName>
<SubstanceName>OCTINOXATE</SubstanceName>
<StrengthNumber>1690</StrengthNumber>
<StrengthUnit>mg/34.48g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>52817-385-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (52817-385-10) </PackageDescription>
<NDC11Code>52817-0385-10</NDC11Code>
<ProductNDC>52817-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glipizide</ProprietaryName>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231003</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214874</ApplicationNumber>
<LabelerName>TruPharma LLC</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231003</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glipizide tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Glipizide is an oral blood-glucose-lowering drug of the sulfonylurea class. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazine-carboxamido)ethyl]phenyl]sulfonyl]urea. The molecular formula is C 21H 27N 5O 4S; the molecular weight is 445.55; the structural formula is shown below:. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 NNaOH; it is freely soluble in dimethylformamide. Glipizide tablets for oral use are available in 2.5 mg, 5mg and 10 mg strengths. Inactive ingredients are: colloidal silicon dioxide; croscarmellose sodium, lactose anhydrous; microcrystalline cellulose and stearic acid. Meets USP Dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>54575-385-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-385-10)</PackageDescription>
<NDC11Code>54575-0385-10</NDC11Code>
<ProductNDC>54575-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cucumber</ProprietaryName>
<NonProprietaryName>Cucumber</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>CUCUMBER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>55150-385-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (55150-385-01) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>55150-0385-01</NDC11Code>
<ProductNDC>55150-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRAMUSCULAR; SOFT TISSUE</RouteName>
<StartMarketingDate>20220705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212400</ApplicationNumber>
<LabelerName>Eugia US LLC</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intramuscular Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension is indicated for intramuscular use as follows: Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus. Intra-Articular The intra-articular or soft tissue administration of triamcinolone acetonide injectable suspension is indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis, acute and subacute bursitis, acute nonspecific tenosynovitis, epicondylitis, rheumatoid arthritis, synovitis of osteoarthritis.</IndicationAndUsage>
<Description>Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Triamcinolone acetonide injectable suspension, USP: Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is: Triamcinolone acetonide, USP occurs as a white or almost-white, crystalline powder, practically insoluble in water, sparingly soluble in ethanol, methanol and chloroform, very slightly soluble in ether.</Description>
</NDC>
<NDC>
<NDCCode>59368-385-01</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (59368-385-01) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>59368-0385-01</NDC11Code>
<ProductNDC>59368-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Micardis Hct</ProprietaryName>
<NonProprietaryName>Telmisartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20001201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021162</ApplicationNumber>
<LabelerName>Praxis, LLC</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; TELMISARTAN</SubstanceName>
<StrengthNumber>12.5; 80</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20001201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>MICARDIS HCT tablets are a combination of telmisartan, an orally active angiotensin II antagonist acting on the AT 1receptor subtype, and hydrochlorothiazide, a thiazide diuretic. Telmisartan, a non-peptide molecule, is chemically described as 4'-[(1,4'-dimethyl-2'-propyl[2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33H 30N 4O 2, its molecular weight is 514.63, and its structural formula is:. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Hydrochlorothiazide is a white, or practically white, practically odorless, crystalline powder with a molecular weight of 297.74. It is slightly soluble in water, and freely soluble in sodium hydroxide solution. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C 7H 8ClN 3O 4S 2, and its structural formula is:. MICARDIS HCT tablets are formulated for oral administration in three combinations of 40 mg/12.5 mg, 80 mg/12.5 mg, and 80 mg/25 mg telmisartan and hydrochlorothiazide, respectively. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, sorbitol, magnesium stearate, lactose monohydrate, microcrystalline cellulose, maize starch, and sodium starch glycolate. As coloring agents, the 40 mg/12.5 mg and 80 mg/12.5 mg tablets contain ferric oxide red, and the 80 mg/25 mg tablets contain ferric oxide yellow. MICARDIS HCT tablets are hygroscopic and require protection from moisture.</Description>
</NDC>
<NDC>
<NDCCode>59746-385-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (59746-385-10) </PackageDescription>
<NDC11Code>59746-0385-10</NDC11Code>
<ProductNDC>59746-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Terazosin</ProprietaryName>
<NonProprietaryName>Terazosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20041220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075317</ApplicationNumber>
<LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TERAZOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20041220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Terazosin capsules are indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH). There is a rapid response, with approximately 70% of patients experiencing an increase in urinary flow and improvement in symptoms of BPH when treated with terazosin capsules. The long-term effects of terazosin capsules on the incidence of surgery, acute urinary obstruction or other complications of BPH are yet to be determined. Terazosin capsules are also indicated for the treatment of hypertension. Terazosin capsules can be used alone or in combination with other antihypertensive agents such as diuretics or beta-adrenergic blocking agents.</IndicationAndUsage>
<Description>Terazosin hydrochloride, an alpha-1-selective adrenoceptor blocking agent, is a quinazoline derivative represented by the following chemical name,molecular formula and structural formula: (RS)-Piperazine, 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-[(tetrahydro-2-furanyl)carbonyl]-, monohydrochloride.C19H26ClN5O4. Terazosin hydrochloride is a white, crystalline substance, freely soluble in water and isotonic saline and has a molecular weight of 423.93. Each capsule, for oral administration, contains 1 mg, 2 mg, 5 mg or 10 mg of terazosin as terazosin hydrochlolde. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and pregelatinized starch. The gelatin capsule contains gelatin, silicon dioxide, sodium lauryl sulfate, and titanium dioxide. The 1 mg shell also contains black iron oxide; the 2 mg capsule shell also contains D&C Yellow #10; the 5 mg capsule shell also contains D&C Yellow #10, FD&C Red #40 and D&C Red #28; the 10 mg capsule shell also contains FD&C Green #3 and D&C Yellow#10.</Description>
</NDC>
<NDC>
<NDCCode>59779-385-03</NDCCode>
<PackageDescription>10 mL in 1 BOTTLE, WITH APPLICATOR (59779-385-03) </PackageDescription>
<NDC11Code>59779-0385-03</NDC11Code>
<ProductNDC>59779-385</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Benzethonium Chloride Plus Dyclonine Hydrochloride</ProprietaryName>
<NonProprietaryName>Liquid Bandage</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140710</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>CVS Pharmacy</LabelerName>
<SubstanceName>BENZETHONIUM CHLORIDE; DYCLONINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.2; .75</StrengthNumber>
<StrengthUnit>mg/10mL; mg/10mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent infection in minor cuts, scrapes, and burns. I first aid for the temporary relief of pain in minor cuts, scrapes, and burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>62332-385-10</NDCCode>
<PackageDescription>100 TABLET in 1 CARTON (62332-385-10) </PackageDescription>
<NDC11Code>62332-0385-10</NDC11Code>
<ProductNDC>62332-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Modafinil</ProprietaryName>
<NonProprietaryName>Modafinil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202700</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>MODAFINIL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulation [PE], Increased Sympathetic Activity [PE], Sympathomimetic-like Agent [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2021-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Modafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with narcolepsy, obstructive sleep apnea (OSA), or shift work disorder (SWD). Limitations of Use. In OSA, modafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating and during treatment with modafinil tablets for excessive sleepiness.</IndicationAndUsage>
<Description>Modafinil tablets are a wakefulness-promoting agent for oral administration. Modafinil is a racemic compound. The chemical name for modafinil is 2-[(diphenylmethyl)sulfinyl]acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35. The chemical structure is. Modafinil is a white to off-white, crystalline powder that is practically insoluble in water and cyclohexane. It is sparingly to slightly soluble in methanol and acetone. Modafinil tablets USP contain 100 mg or 200 mg of modafinil USP and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, mannitol and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>63323-385-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (63323-385-10) / 10 mL in 1 VIAL (63323-385-01) </PackageDescription>
<NDC11Code>63323-0385-10</NDC11Code>
<ProductNDC>63323-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotetan</ProprietaryName>
<NonProprietaryName>Cefotetan Disodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20091118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065374</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CEFOTETAN DISODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/10mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Cefotetan for Injection, USP, as cefotetan disodium, is a sterile, semisynthetic, broad-spectrum, beta-lactamase resistant, cephalosporin (cephamycin) antibacterial for parenteral administration. It is the disodium salt of [6R-(6α,7α)]-7-[[[4-(2-amino-1-carboxy-2-oxoethylidene)-1,3-dithietan-2-yl]carbonyl]amino]-7-methoxy-3-[[(1-methyl-1H-tetrazol-5-yl)thio]methyl]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Structural formula:. Cefotetan for Injection, USP is supplied in vials containing 80 mg (3.5 mEq) of sodium per gram of cefotetan activity. It is a white to pale yellow powder which is very soluble in water. Reconstituted solutions of Cefotetan for Injection, USP are intended for intravenous and intramuscular administration. The solution varies from colorless to yellow depending on the concentration. The pH of freshly reconstituted solutions is usually between 4.5 to 6.5. Cefotetan for Injection, USP is available in two vial strengths. Each 1 gram vial contains cefotetan disodium equivalent to 1 gram cefotetan activity. Each 2 gram vial contains cefotetan disodium equivalent to 2 grams cefotetan activity.</Description>
</NDC>
<NDC>
<NDCCode>65219-385-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (65219-385-10) / 10 mL in 1 VIAL (65219-385-01) </PackageDescription>
<NDC11Code>65219-0385-10</NDC11Code>
<ProductNDC>65219-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216021</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole Sodium for Injection is a proton pump inhibitor (PPI) indicated in adults for the following: : 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of erosive esophagitis (EE). (1.1), 2 Pathological hypersecretion conditions, including Zollinger-Ellison (ZE) syndrome. (1.2).</IndicationAndUsage>
<Description>The active ingredient in Pantoprazole Sodium for Injection, a PPI, is 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl) methyl]sulfinyl]-1H-benzimidazole, sodium salt, hydrate (2:3), a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, 11/2 H2O, with a molecular weight of 432.4. The structural formula is. Pantoprazole sodium, USP is a white to almost white powder and is racemic. Pantoprazole sodium is freely soluble in water and in ethyl alcohol, and practically insoluble in hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of Pantoprazole Sodium for Injection is in the pH range 9.5 to 11.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile white to off-white cake or powder in a single-dose clear flint tubing glass vial, stoppered with lyo rubber closure, sealed with aluminum flip-off overseal. Each vial contains 40 mg pantoprazole (45.1 mg pantoprazole sodium, USP equivalent to 40 mg pantoprazole), and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>67457-385-99</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (67457-385-99) / 10 mL in 1 VIAL, MULTI-DOSE (67457-385-10) </PackageDescription>
<NDC11Code>67457-0385-99</NDC11Code>
<ProductNDC>67457-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180316</StartMarketingDate>
<EndMarketingDate>20260731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203851</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180316</StartMarketingDatePackage>
<EndMarketingDatePackage>20260731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin sodium injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease; , 3 Atrial fibrillation with embolization; , 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation); , 5 Prevention of clotting in arterial and cardiac surgery; , 6 Prophylaxis and treatment of peripheral arterial embolism. , 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium, USP (representative subunits):. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations/mL:. pH 5.0 to 7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>69423-385-10</NDCCode>
<PackageDescription>107 g in 1 CAN (69423-385-10) </PackageDescription>
<NDC11Code>69423-0385-10</NDC11Code>
<ProductNDC>69423-385</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Old Spice Sweat Defense Ultimate Captain Dry</ProprietaryName>
<NonProprietaryName>Aluminum Chlorohydrate</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190901</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>M019</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>ALUMINUM CHLOROHYDRATE</SubstanceName>
<StrengthNumber>23.5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces underarm wetness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71919-385-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-385-10) </PackageDescription>
<NDC11Code>71919-0385-10</NDC11Code>
<ProductNDC>71919-385</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kali Nitricum</ProprietaryName>
<NonProprietaryName>Potassium Nitrate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101029</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>POTASSIUM NITRATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>