{
"NDC": [
{
"NDCCode": "68428-708-11",
"PackageDescription": "300 PELLET in 1 BOTTLE, GLASS (68428-708-11) ",
"NDC11Code": "68428-0708-11",
"ProductNDC": "68428-708",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Wyethia Helenioides",
"NonProprietaryName": "Wyethia Helenioides Root",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100311",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "WYETHIA HELENIOIDES ROOT",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2023-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100311",
"SamplePackage": "N"
},
{
"NDCCode": "10237-708-42",
"PackageDescription": "1 TUBE in 1 CARTON (10237-708-42) > 11.9 g in 1 TUBE",
"NDC11Code": "10237-0708-42",
"ProductNDC": "10237-708",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Orajel Instant Pain Relief",
"ProprietaryNameSuffix": "Maximum Strength",
"NonProprietaryName": "Benzocaine",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100611",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part356",
"LabelerName": "Church & Dwight Co., Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE; BENZOCAINE; ZINC CHLORIDE",
"StrengthNumber": ".4; 200; 1",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Use for the temporary relief of pain associated with canker sores, cold sores, fever blisters, minor irritation or injury of the mouth and gums. To help protect against infection in minor oral irritation."
},
{
"NDCCode": "46362-001-11",
"PackageDescription": "708 L in 1 CYLINDER (46362-001-11) ",
"NDC11Code": "46362-0001-11",
"ProductNDC": "46362-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19860101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205865",
"LabelerName": "Red Ball Oxygen Co., Inc.",
"SubstanceName": "OXYGEN",
"StrengthNumber": "992",
"StrengthUnit": "mL/L",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19860101",
"SamplePackage": "N"
},
{
"NDCCode": "50268-708-15",
"PackageDescription": "50 BLISTER PACK in 1 BOX (50268-708-15) / 1 TABLET in 1 BLISTER PACK (50268-708-11) ",
"NDC11Code": "50268-0708-15",
"ProductNDC": "50268-708",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ramelteon",
"NonProprietaryName": "Ramelteon",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210106",
"EndMarketingDate": "20260709",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091693",
"LabelerName": "AvPAK",
"SubstanceName": "RAMELTEON",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Melatonin Receptor Agonist [EPC], Melatonin Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-07-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210106",
"EndMarketingDatePackage": "20260709",
"SamplePackage": "N",
"IndicationAndUsage": "Ramelteon tablets are indicated for the treatment of insomnia characterized by difficulty with sleep onset. The clinical trials performed in support of efficacy were up to six months in duration. The final formal assessments of sleep latency were performed after two days of treatment during the crossover study (elderly only), at five weeks in the six week studies (adults and elderly), and at the end of the six month study (adults and elderly) [see Clinical Studies ( 14)].",
"Description": "Ramelteon is an orally active hypnotic chemically designated as (S)-N-[2-(1,6,7,8-tetrahydro-2H-indeno-[5,4-b]furan-8-yl)ethyl]propionamide and containing one chiral center. The compound is produced as the (S)-enantiomer, and has the following structural formula:. Ramelteon is freely soluble in organic solvents, such as methanol, ethanol, and dimethyl sulfoxide; soluble in 1-octanol and acetonitrile; and very slightly soluble in water and in aqueous buffers from pH 3 to pH 11. Each ramelteon tablet for oral administration contains 8 mg ramelteon, and has the following inactive ingredients: hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, pregelatinized corn starch, titanium dioxide, and triacetin."
},
{
"NDCCode": "60687-708-09",
"PackageDescription": "80 BLISTER PACK in 1 CARTON (60687-708-09) / 1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (60687-708-11) ",
"NDC11Code": "60687-0708-09",
"ProductNDC": "60687-708",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230227",
"EndMarketingDate": "20241031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210733",
"LabelerName": "American Health Packaging",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230227",
"EndMarketingDatePackage": "20241031",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride Extended-release Tablets, USP is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.",
"Description": "Potassium Chloride Extended-release Tablets, USP are a solid oral dosage form of potassium chloride. Each contains 600 mg or 750 mg of potassium chloride equivalent to 8 mEq or 10 mEq of potassium in a wax matrix tablet. Potassium Chloride Extended-release Tablets, USP are an electrolyte replenisher. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP is a white, granular powder or colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive Ingredients: Hydrogenated Vegetable Oil Type 1, Ethylcellulose (10cP), Ethylcellulose (100cP), Silicon Dioxide, Talc, Magnesium Stearate. The 600 mg tablets also contain Polyvinyl Alcohol, Titanium dioxide, Macrogol / PEG, Talc, FD&C Blue #1 / Brilliant Blue FCF Aluminum Lake, FD&C Blue #2 / Indigo Carmine Al 3% - 5% and the 750 mg tablets also contain of Polyvinyl Alcohol, Titanium dioxide, Macrogol / PEG, Talc, FD&C Yellow #5 / Tartrazine Aluminum Lake and FD&C Yellow #6 / Sunset Yellow FCF Aluminum Lake. \"FDA approved dissolution test specifications differ from USP.\" and \"FDA approved acceptance criteria for assay differs from USP test.\"."
},
{
"NDCCode": "68428-708-03",
"PackageDescription": "75 PELLET in 1 VIAL, GLASS (68428-708-03) ",
"NDC11Code": "68428-0708-03",
"ProductNDC": "68428-708",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Wyethia Helenioides",
"NonProprietaryName": "Wyethia Helenioides Root",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100311",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "WYETHIA HELENIOIDES ROOT",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2023-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100311",
"SamplePackage": "N"
},
{
"NDCCode": "68428-708-05",
"PackageDescription": "150 PELLET in 1 VIAL, GLASS (68428-708-05) ",
"NDC11Code": "68428-0708-05",
"ProductNDC": "68428-708",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Wyethia Helenioides",
"NonProprietaryName": "Wyethia Helenioides Root",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100311",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "WYETHIA HELENIOIDES ROOT",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2023-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100311",
"SamplePackage": "N"
},
{
"NDCCode": "68428-708-06",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (68428-708-06) ",
"NDC11Code": "68428-0708-06",
"ProductNDC": "68428-708",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Wyethia Helenioides",
"NonProprietaryName": "Wyethia Helenioides Root",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100311",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "WYETHIA HELENIOIDES ROOT",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2023-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100311",
"SamplePackage": "N"
},
{
"NDCCode": "68428-708-12",
"PackageDescription": "600 PELLET in 1 BOTTLE, GLASS (68428-708-12) ",
"NDC11Code": "68428-0708-12",
"ProductNDC": "68428-708",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Wyethia Helenioides",
"NonProprietaryName": "Wyethia Helenioides Root",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100311",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "WYETHIA HELENIOIDES ROOT",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2023-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100311",
"SamplePackage": "N"
},
{
"NDCCode": "0338-0122-04",
"PackageDescription": "250 mL in 1 BAG (0338-0122-04) ",
"NDC11Code": "00338-0122-04",
"ProductNDC": "0338-0122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "g/250mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240125",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-0124-04",
"PackageDescription": "300 mL in 1 BAG (0338-0124-04) ",
"NDC11Code": "00338-0124-04",
"ProductNDC": "0338-0124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/300mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240125",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3551-48",
"PackageDescription": "100 mL in 1 BAG (0338-3551-48) ",
"NDC11Code": "00338-3551-48",
"ProductNDC": "0338-3551",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19581114",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3552-48",
"PackageDescription": "200 mL in 1 BAG (0338-3552-48) ",
"NDC11Code": "00338-3552-48",
"ProductNDC": "0338-3552",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/200mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19581114",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3580-48",
"PackageDescription": "200 mL in 1 BAG (0338-3580-48) ",
"NDC11Code": "00338-3580-48",
"ProductNDC": "0338-3580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/150mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19581114",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3581-01",
"PackageDescription": "100 mL in 1 BAG (0338-3581-01) ",
"NDC11Code": "00338-3581-01",
"ProductNDC": "0338-3581",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151218",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3582-01",
"PackageDescription": "150 mL in 1 BAG (0338-3582-01) ",
"NDC11Code": "00338-3582-01",
"ProductNDC": "0338-3582",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/150mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151218",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3583-01",
"PackageDescription": "200 mL in 1 BAG (0338-3583-01) ",
"NDC11Code": "00338-3583-01",
"ProductNDC": "0338-3583",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/200mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151218",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "10736-203-05",
"PackageDescription": "708 L in 1 CYLINDER (10736-203-05) ",
"NDC11Code": "10736-0203-05",
"ProductNDC": "10736-203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrogen",
"NonProprietaryName": "Nitrogen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20120529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205866",
"LabelerName": "Medical-Technical Gases, Inc.",
"SubstanceName": "NITROGEN",
"StrengthNumber": "990",
"StrengthUnit": "mL/L",
"Status": "Active",
"LastUpdate": "2025-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120529",
"SamplePackage": "N"
},
{
"NDCCode": "16571-708-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (16571-708-06) ",
"NDC11Code": "16571-0708-06",
"ProductNDC": "16571-708",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078462",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090327",
"SamplePackage": "N",
"IndicationAndUsage": "Topiramate tablets are indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3) .",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets are available as 25 mg, 50 mg, 100 mg, and 200 mg circular tablets for oral administration. Topiramate USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate tablets USP contain the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch (maize), sodium starch glycolate, and titanium dioxide. In addition, the 50 mg and 100 mg tablets contain iron oxide yellow and 200 mg tablet contains iron oxide red."
},
{
"NDCCode": "16571-708-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (16571-708-10) ",
"NDC11Code": "16571-0708-10",
"ProductNDC": "16571-708",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078462",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220411",
"SamplePackage": "N",
"IndicationAndUsage": "Topiramate tablets are indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3) .",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets are available as 25 mg, 50 mg, 100 mg, and 200 mg circular tablets for oral administration. Topiramate USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate tablets USP contain the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch (maize), sodium starch glycolate, and titanium dioxide. In addition, the 50 mg and 100 mg tablets contain iron oxide yellow and 200 mg tablet contains iron oxide red."
},
{
"NDCCode": "16714-860-01",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (16714-860-01) ",
"NDC11Code": "16714-0860-01",
"ProductNDC": "16714-860",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir Sulfate",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204806",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190408",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsule is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use.",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula: Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C blue 2, gelatin, iron oxide black, iron oxide red, iron oxide yellow, and titanium dioxide. The capsules are printed with ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and titanium dioxide."
},
{
"NDCCode": "16714-861-01",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (16714-861-01) ",
"NDC11Code": "16714-0861-01",
"ProductNDC": "16714-861",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir Sulfate",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204806",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190408",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsule is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use.",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula: Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C blue 2, gelatin, iron oxide black, iron oxide red, iron oxide yellow, and titanium dioxide. The capsules are printed with ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and titanium dioxide."
},
{
"NDCCode": "16714-862-01",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (16714-862-01) ",
"NDC11Code": "16714-0862-01",
"ProductNDC": "16714-862",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir Sulfate",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204806",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190408",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsule is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use.",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula: Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C blue 2, gelatin, iron oxide black, iron oxide red, iron oxide yellow, and titanium dioxide. The capsules are printed with ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and titanium dioxide."
},
{
"NDCCode": "21220-119-06",
"PackageDescription": "708 L in 1 CYLINDER (21220-119-06) ",
"NDC11Code": "21220-0119-06",
"ProductNDC": "21220-119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19720601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205849",
"LabelerName": "General Air Service & Supply Co",
"SubstanceName": "OXYGEN",
"StrengthNumber": "995",
"StrengthUnit": "mL/L",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19720601",
"SamplePackage": "N"
},
{
"NDCCode": "21220-155-02",
"PackageDescription": "708 L in 1 CYLINDER (21220-155-02) ",
"NDC11Code": "21220-0155-02",
"ProductNDC": "21220-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Helium/oxygen Mixture 80/20",
"NonProprietaryName": "Helium/oxygen Mixture 80/20",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19750101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205849",
"LabelerName": "General Air Service & Supply Co.",
"SubstanceName": "OXYGEN",
"StrengthNumber": "200",
"StrengthUnit": "mL/L",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19750101",
"SamplePackage": "N"
},
{
"NDCCode": "21220-158-02",
"PackageDescription": "708 L in 1 CYLINDER (21220-158-02) ",
"NDC11Code": "21220-0158-02",
"ProductNDC": "21220-158",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Helium/oxygen Mixture 70/30",
"NonProprietaryName": "Helium/oxygen Mixture 70/30",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19750101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205849",
"LabelerName": "General Air Service & Supply Co",
"SubstanceName": "OXYGEN",
"StrengthNumber": "300",
"StrengthUnit": "mL/L",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19750101",
"SamplePackage": "N"
},
{
"NDCCode": "24658-708-34",
"PackageDescription": "30 mL in 1 BOTTLE, PLASTIC (24658-708-34) ",
"NDC11Code": "24658-0708-34",
"ProductNDC": "24658-708",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20200430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207531",
"LabelerName": "PURACAP LABORATORIES LLC DBA BLU PHARMACEUTICALS",
"SubstanceName": "AZITHROMYCIN MONOHYDRATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200430",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "Azithromycin for oral suspension USP contains the active ingredient azithromycin monohydrate, USP, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one monohydrate. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12∙H2O, and its molecular weight is 767.00. Azithromycin has the following structural formula. Azithromycin, USP, as the monohydrate, is a white to off-white crystalline powder with a molecular formula of C38H72N2O12H2O and a molecular weight of 767.00. Azithromycin for Oral Suspension USP is supplied in bottles containing azithromycin monohydrate powder equivalent to 600 mg, or 1200 mg azithromycin, USP per bottle and the following inactive ingredients: colloidal silicon dioxide, FD & C Red No. 40 Aluminum Lake, hydroxypropyl cellulose, sodium phosphate tribasic anhydrous, sucrose, natural and artificial banana flavor, natural and artificial cherry flavor and xanthan gum. After constitution, each 5 mL of suspension contains 200 mg of azithromycin, USP. The dry powder before constitution is off-white to pinkish in color. The suspension after constitution is pink to red in color."
},
{
"NDCCode": "31722-653-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (31722-653-10) ",
"NDC11Code": "31722-0653-10",
"ProductNDC": "31722-653",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212278",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220207",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: Atazanavir are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations ( 8.4)] . Use of atazanavir with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology ( 12.4)] .",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is ((3 S,8 S,9 S,12 S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl] 2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate. Its molecular formula is C 38H 52N 6O 7.H 2SO 4which corresponds to a molecular weight of 802.9 (sulphuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula:. Atazanavir sulfate is an off white to pale yellow coloured crystalline powder. It is slightly soluble in water at acidic pH, freely soluble in methanol, soluble in dimethylformamide and dimethylsulfoxide. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue 1, iron oxide yellow, titanium dioxide, In addition 150 mg capsule shell contains iron oxide black, 200 mg and 300 mg contains FD&C Yellow 6, 300 mg also contains FD&C Red 3. The capsules are printed with black ink containing iron oxide black, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "31722-653-31",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (31722-653-31) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "31722-0653-31",
"ProductNDC": "31722-653",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212278",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220207",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: Atazanavir are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations ( 8.4)] . Use of atazanavir with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology ( 12.4)] .",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is ((3 S,8 S,9 S,12 S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl] 2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate. Its molecular formula is C 38H 52N 6O 7.H 2SO 4which corresponds to a molecular weight of 802.9 (sulphuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula:. Atazanavir sulfate is an off white to pale yellow coloured crystalline powder. It is slightly soluble in water at acidic pH, freely soluble in methanol, soluble in dimethylformamide and dimethylsulfoxide. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue 1, iron oxide yellow, titanium dioxide, In addition 150 mg capsule shell contains iron oxide black, 200 mg and 300 mg contains FD&C Yellow 6, 300 mg also contains FD&C Red 3. The capsules are printed with black ink containing iron oxide black, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "31722-653-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (31722-653-60) ",
"NDC11Code": "31722-0653-60",
"ProductNDC": "31722-653",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212278",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220207",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: Atazanavir are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations ( 8.4)] . Use of atazanavir with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology ( 12.4)] .",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is ((3 S,8 S,9 S,12 S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl] 2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate. Its molecular formula is C 38H 52N 6O 7.H 2SO 4which corresponds to a molecular weight of 802.9 (sulphuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula:. Atazanavir sulfate is an off white to pale yellow coloured crystalline powder. It is slightly soluble in water at acidic pH, freely soluble in methanol, soluble in dimethylformamide and dimethylsulfoxide. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue 1, iron oxide yellow, titanium dioxide, In addition 150 mg capsule shell contains iron oxide black, 200 mg and 300 mg contains FD&C Yellow 6, 300 mg also contains FD&C Red 3. The capsules are printed with black ink containing iron oxide black, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68428-708-11</NDCCode>
<PackageDescription>300 PELLET in 1 BOTTLE, GLASS (68428-708-11) </PackageDescription>
<NDC11Code>68428-0708-11</NDC11Code>
<ProductNDC>68428-708</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Wyethia Helenioides</ProprietaryName>
<NonProprietaryName>Wyethia Helenioides Root</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100311</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>WYETHIA HELENIOIDES ROOT</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>10237-708-42</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (10237-708-42) > 11.9 g in 1 TUBE</PackageDescription>
<NDC11Code>10237-0708-42</NDC11Code>
<ProductNDC>10237-708</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Orajel Instant Pain Relief</ProprietaryName>
<ProprietaryNameSuffix>Maximum Strength</ProprietaryNameSuffix>
<NonProprietaryName>Benzocaine</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100611</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part356</ApplicationNumber>
<LabelerName>Church & Dwight Co., Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE; BENZOCAINE; ZINC CHLORIDE</SubstanceName>
<StrengthNumber>.4; 200; 1</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Use for the temporary relief of pain associated with canker sores, cold sores, fever blisters, minor irritation or injury of the mouth and gums. To help protect against infection in minor oral irritation.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>46362-001-11</NDCCode>
<PackageDescription>708 L in 1 CYLINDER (46362-001-11) </PackageDescription>
<NDC11Code>46362-0001-11</NDC11Code>
<ProductNDC>46362-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19860101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205865</ApplicationNumber>
<LabelerName>Red Ball Oxygen Co., Inc.</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>992</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19860101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50268-708-15</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 BOX (50268-708-15) / 1 TABLET in 1 BLISTER PACK (50268-708-11) </PackageDescription>
<NDC11Code>50268-0708-15</NDC11Code>
<ProductNDC>50268-708</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ramelteon</ProprietaryName>
<NonProprietaryName>Ramelteon</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210106</StartMarketingDate>
<EndMarketingDate>20260709</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091693</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>RAMELTEON</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Melatonin Receptor Agonist [EPC], Melatonin Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210106</StartMarketingDatePackage>
<EndMarketingDatePackage>20260709</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ramelteon tablets are indicated for the treatment of insomnia characterized by difficulty with sleep onset. The clinical trials performed in support of efficacy were up to six months in duration. The final formal assessments of sleep latency were performed after two days of treatment during the crossover study (elderly only), at five weeks in the six week studies (adults and elderly), and at the end of the six month study (adults and elderly) [see Clinical Studies ( 14)].</IndicationAndUsage>
<Description>Ramelteon is an orally active hypnotic chemically designated as (S)-N-[2-(1,6,7,8-tetrahydro-2H-indeno-[5,4-b]furan-8-yl)ethyl]propionamide and containing one chiral center. The compound is produced as the (S)-enantiomer, and has the following structural formula:. Ramelteon is freely soluble in organic solvents, such as methanol, ethanol, and dimethyl sulfoxide; soluble in 1-octanol and acetonitrile; and very slightly soluble in water and in aqueous buffers from pH 3 to pH 11. Each ramelteon tablet for oral administration contains 8 mg ramelteon, and has the following inactive ingredients: hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, pregelatinized corn starch, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>60687-708-09</NDCCode>
<PackageDescription>80 BLISTER PACK in 1 CARTON (60687-708-09) / 1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (60687-708-11) </PackageDescription>
<NDC11Code>60687-0708-09</NDC11Code>
<ProductNDC>60687-708</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230227</StartMarketingDate>
<EndMarketingDate>20241031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210733</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230227</StartMarketingDatePackage>
<EndMarketingDatePackage>20241031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride Extended-release Tablets, USP is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.</IndicationAndUsage>
<Description>Potassium Chloride Extended-release Tablets, USP are a solid oral dosage form of potassium chloride. Each contains 600 mg or 750 mg of potassium chloride equivalent to 8 mEq or 10 mEq of potassium in a wax matrix tablet. Potassium Chloride Extended-release Tablets, USP are an electrolyte replenisher. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP is a white, granular powder or colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive Ingredients: Hydrogenated Vegetable Oil Type 1, Ethylcellulose (10cP), Ethylcellulose (100cP), Silicon Dioxide, Talc, Magnesium Stearate. The 600 mg tablets also contain Polyvinyl Alcohol, Titanium dioxide, Macrogol / PEG, Talc, FD&C Blue #1 / Brilliant Blue FCF Aluminum Lake, FD&C Blue #2 / Indigo Carmine Al 3% - 5% and the 750 mg tablets also contain of Polyvinyl Alcohol, Titanium dioxide, Macrogol / PEG, Talc, FD&C Yellow #5 / Tartrazine Aluminum Lake and FD&C Yellow #6 / Sunset Yellow FCF Aluminum Lake. "FDA approved dissolution test specifications differ from USP." and "FDA approved acceptance criteria for assay differs from USP test.".</Description>
</NDC>
<NDC>
<NDCCode>68428-708-03</NDCCode>
<PackageDescription>75 PELLET in 1 VIAL, GLASS (68428-708-03) </PackageDescription>
<NDC11Code>68428-0708-03</NDC11Code>
<ProductNDC>68428-708</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Wyethia Helenioides</ProprietaryName>
<NonProprietaryName>Wyethia Helenioides Root</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100311</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>WYETHIA HELENIOIDES ROOT</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68428-708-05</NDCCode>
<PackageDescription>150 PELLET in 1 VIAL, GLASS (68428-708-05) </PackageDescription>
<NDC11Code>68428-0708-05</NDC11Code>
<ProductNDC>68428-708</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Wyethia Helenioides</ProprietaryName>
<NonProprietaryName>Wyethia Helenioides Root</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100311</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>WYETHIA HELENIOIDES ROOT</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68428-708-06</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (68428-708-06) </PackageDescription>
<NDC11Code>68428-0708-06</NDC11Code>
<ProductNDC>68428-708</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Wyethia Helenioides</ProprietaryName>
<NonProprietaryName>Wyethia Helenioides Root</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100311</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>WYETHIA HELENIOIDES ROOT</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68428-708-12</NDCCode>
<PackageDescription>600 PELLET in 1 BOTTLE, GLASS (68428-708-12) </PackageDescription>
<NDC11Code>68428-0708-12</NDC11Code>
<ProductNDC>68428-708</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Wyethia Helenioides</ProprietaryName>
<NonProprietaryName>Wyethia Helenioides Root</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100311</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>WYETHIA HELENIOIDES ROOT</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0338-0122-04</NDCCode>
<PackageDescription>250 mL in 1 BAG (0338-0122-04) </PackageDescription>
<NDC11Code>00338-0122-04</NDC11Code>
<ProductNDC>0338-0122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>g/250mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-0124-04</NDCCode>
<PackageDescription>300 mL in 1 BAG (0338-0124-04) </PackageDescription>
<NDC11Code>00338-0124-04</NDC11Code>
<ProductNDC>0338-0124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/300mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3551-48</NDCCode>
<PackageDescription>100 mL in 1 BAG (0338-3551-48) </PackageDescription>
<NDC11Code>00338-3551-48</NDC11Code>
<ProductNDC>0338-3551</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19581114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3552-48</NDCCode>
<PackageDescription>200 mL in 1 BAG (0338-3552-48) </PackageDescription>
<NDC11Code>00338-3552-48</NDC11Code>
<ProductNDC>0338-3552</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/200mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19581114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3580-48</NDCCode>
<PackageDescription>200 mL in 1 BAG (0338-3580-48) </PackageDescription>
<NDC11Code>00338-3580-48</NDC11Code>
<ProductNDC>0338-3580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/150mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19581114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3581-01</NDCCode>
<PackageDescription>100 mL in 1 BAG (0338-3581-01) </PackageDescription>
<NDC11Code>00338-3581-01</NDC11Code>
<ProductNDC>0338-3581</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3582-01</NDCCode>
<PackageDescription>150 mL in 1 BAG (0338-3582-01) </PackageDescription>
<NDC11Code>00338-3582-01</NDC11Code>
<ProductNDC>0338-3582</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/150mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3583-01</NDCCode>
<PackageDescription>200 mL in 1 BAG (0338-3583-01) </PackageDescription>
<NDC11Code>00338-3583-01</NDC11Code>
<ProductNDC>0338-3583</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/200mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>10736-203-05</NDCCode>
<PackageDescription>708 L in 1 CYLINDER (10736-203-05) </PackageDescription>
<NDC11Code>10736-0203-05</NDC11Code>
<ProductNDC>10736-203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrogen</ProprietaryName>
<NonProprietaryName>Nitrogen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20120529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205866</ApplicationNumber>
<LabelerName>Medical-Technical Gases, Inc.</LabelerName>
<SubstanceName>NITROGEN</SubstanceName>
<StrengthNumber>990</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>16571-708-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (16571-708-06) </PackageDescription>
<NDC11Code>16571-0708-06</NDC11Code>
<ProductNDC>16571-708</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078462</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topiramate tablets are indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3) .</IndicationAndUsage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets are available as 25 mg, 50 mg, 100 mg, and 200 mg circular tablets for oral administration. Topiramate USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate tablets USP contain the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch (maize), sodium starch glycolate, and titanium dioxide. In addition, the 50 mg and 100 mg tablets contain iron oxide yellow and 200 mg tablet contains iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>16571-708-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (16571-708-10) </PackageDescription>
<NDC11Code>16571-0708-10</NDC11Code>
<ProductNDC>16571-708</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078462</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topiramate tablets are indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3) .</IndicationAndUsage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets are available as 25 mg, 50 mg, 100 mg, and 200 mg circular tablets for oral administration. Topiramate USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate tablets USP contain the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch (maize), sodium starch glycolate, and titanium dioxide. In addition, the 50 mg and 100 mg tablets contain iron oxide yellow and 200 mg tablet contains iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>16714-860-01</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (16714-860-01) </PackageDescription>
<NDC11Code>16714-0860-01</NDC11Code>
<ProductNDC>16714-860</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir Sulfate</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204806</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsule is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use.</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula: Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C blue 2, gelatin, iron oxide black, iron oxide red, iron oxide yellow, and titanium dioxide. The capsules are printed with ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16714-861-01</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (16714-861-01) </PackageDescription>
<NDC11Code>16714-0861-01</NDC11Code>
<ProductNDC>16714-861</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir Sulfate</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204806</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsule is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use.</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula: Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C blue 2, gelatin, iron oxide black, iron oxide red, iron oxide yellow, and titanium dioxide. The capsules are printed with ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16714-862-01</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (16714-862-01) </PackageDescription>
<NDC11Code>16714-0862-01</NDC11Code>
<ProductNDC>16714-862</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir Sulfate</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204806</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsule is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use.</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula: Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C blue 2, gelatin, iron oxide black, iron oxide red, iron oxide yellow, and titanium dioxide. The capsules are printed with ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>21220-119-06</NDCCode>
<PackageDescription>708 L in 1 CYLINDER (21220-119-06) </PackageDescription>
<NDC11Code>21220-0119-06</NDC11Code>
<ProductNDC>21220-119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19720601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205849</ApplicationNumber>
<LabelerName>General Air Service & Supply Co</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>995</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19720601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>21220-155-02</NDCCode>
<PackageDescription>708 L in 1 CYLINDER (21220-155-02) </PackageDescription>
<NDC11Code>21220-0155-02</NDC11Code>
<ProductNDC>21220-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Helium/oxygen Mixture 80/20</ProprietaryName>
<NonProprietaryName>Helium/oxygen Mixture 80/20</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19750101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205849</ApplicationNumber>
<LabelerName>General Air Service & Supply Co.</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19750101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>21220-158-02</NDCCode>
<PackageDescription>708 L in 1 CYLINDER (21220-158-02) </PackageDescription>
<NDC11Code>21220-0158-02</NDC11Code>
<ProductNDC>21220-158</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Helium/oxygen Mixture 70/30</ProprietaryName>
<NonProprietaryName>Helium/oxygen Mixture 70/30</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19750101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205849</ApplicationNumber>
<LabelerName>General Air Service & Supply Co</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19750101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>24658-708-34</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, PLASTIC (24658-708-34) </PackageDescription>
<NDC11Code>24658-0708-34</NDC11Code>
<ProductNDC>24658-708</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207531</ApplicationNumber>
<LabelerName>PURACAP LABORATORIES LLC DBA BLU PHARMACEUTICALS</LabelerName>
<SubstanceName>AZITHROMYCIN MONOHYDRATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin for oral suspension USP contains the active ingredient azithromycin monohydrate, USP, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one monohydrate. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12∙H2O, and its molecular weight is 767.00. Azithromycin has the following structural formula. Azithromycin, USP, as the monohydrate, is a white to off-white crystalline powder with a molecular formula of C38H72N2O12H2O and a molecular weight of 767.00. Azithromycin for Oral Suspension USP is supplied in bottles containing azithromycin monohydrate powder equivalent to 600 mg, or 1200 mg azithromycin, USP per bottle and the following inactive ingredients: colloidal silicon dioxide, FD & C Red No. 40 Aluminum Lake, hydroxypropyl cellulose, sodium phosphate tribasic anhydrous, sucrose, natural and artificial banana flavor, natural and artificial cherry flavor and xanthan gum. After constitution, each 5 mL of suspension contains 200 mg of azithromycin, USP. The dry powder before constitution is off-white to pinkish in color. The suspension after constitution is pink to red in color.</Description>
</NDC>
<NDC>
<NDCCode>31722-653-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (31722-653-10) </PackageDescription>
<NDC11Code>31722-0653-10</NDC11Code>
<ProductNDC>31722-653</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212278</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: Atazanavir are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations ( 8.4)] . Use of atazanavir with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology ( 12.4)] .</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is ((3 S,8 S,9 S,12 S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl] 2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate. Its molecular formula is C 38H 52N 6O 7.H 2SO 4which corresponds to a molecular weight of 802.9 (sulphuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula:. Atazanavir sulfate is an off white to pale yellow coloured crystalline powder. It is slightly soluble in water at acidic pH, freely soluble in methanol, soluble in dimethylformamide and dimethylsulfoxide. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue 1, iron oxide yellow, titanium dioxide, In addition 150 mg capsule shell contains iron oxide black, 200 mg and 300 mg contains FD&C Yellow 6, 300 mg also contains FD&C Red 3. The capsules are printed with black ink containing iron oxide black, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>31722-653-31</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (31722-653-31) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>31722-0653-31</NDC11Code>
<ProductNDC>31722-653</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212278</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: Atazanavir are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations ( 8.4)] . Use of atazanavir with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology ( 12.4)] .</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is ((3 S,8 S,9 S,12 S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl] 2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate. Its molecular formula is C 38H 52N 6O 7.H 2SO 4which corresponds to a molecular weight of 802.9 (sulphuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula:. Atazanavir sulfate is an off white to pale yellow coloured crystalline powder. It is slightly soluble in water at acidic pH, freely soluble in methanol, soluble in dimethylformamide and dimethylsulfoxide. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue 1, iron oxide yellow, titanium dioxide, In addition 150 mg capsule shell contains iron oxide black, 200 mg and 300 mg contains FD&C Yellow 6, 300 mg also contains FD&C Red 3. The capsules are printed with black ink containing iron oxide black, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>31722-653-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (31722-653-60) </PackageDescription>
<NDC11Code>31722-0653-60</NDC11Code>
<ProductNDC>31722-653</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212278</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: Atazanavir are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations ( 8.4)] . Use of atazanavir with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology ( 12.4)] .</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is ((3 S,8 S,9 S,12 S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl] 2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate. Its molecular formula is C 38H 52N 6O 7.H 2SO 4which corresponds to a molecular weight of 802.9 (sulphuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula:. Atazanavir sulfate is an off white to pale yellow coloured crystalline powder. It is slightly soluble in water at acidic pH, freely soluble in methanol, soluble in dimethylformamide and dimethylsulfoxide. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue 1, iron oxide yellow, titanium dioxide, In addition 150 mg capsule shell contains iron oxide black, 200 mg and 300 mg contains FD&C Yellow 6, 300 mg also contains FD&C Red 3. The capsules are printed with black ink containing iron oxide black, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
</NDCList>