{
"NDC": [
{
"NDCCode": "68462-530-47",
"PackageDescription": "1 TUBE in 1 CARTON (68462-530-47) / 45 g in 1 TUBE",
"NDC11Code": "68462-0530-47",
"ProductNDC": "68462-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208933",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate ointment is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 grams per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.",
"Description": "Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate USP is 21-Chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate USP has the empirical formula of C25H32ClFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Ointment USP, 0.05% contains clobetasol propionate USP 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum."
},
{
"NDCCode": "68462-530-17",
"PackageDescription": "1 TUBE in 1 CARTON (68462-530-17) / 15 g in 1 TUBE",
"NDC11Code": "68462-0530-17",
"ProductNDC": "68462-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208933",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate ointment is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 grams per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.",
"Description": "Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate USP is 21-Chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate USP has the empirical formula of C25H32ClFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Ointment USP, 0.05% contains clobetasol propionate USP 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum."
},
{
"NDCCode": "68462-530-35",
"PackageDescription": "1 TUBE in 1 CARTON (68462-530-35) / 30 g in 1 TUBE",
"NDC11Code": "68462-0530-35",
"ProductNDC": "68462-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208933",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate ointment is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 grams per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.",
"Description": "Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate USP is 21-Chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate USP has the empirical formula of C25H32ClFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Ointment USP, 0.05% contains clobetasol propionate USP 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum."
},
{
"NDCCode": "68462-530-65",
"PackageDescription": "1 TUBE in 1 CARTON (68462-530-65) / 60 g in 1 TUBE",
"NDC11Code": "68462-0530-65",
"ProductNDC": "68462-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208933",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate ointment is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 grams per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.",
"Description": "Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate USP is 21-Chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate USP has the empirical formula of C25H32ClFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Ointment USP, 0.05% contains clobetasol propionate USP 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum."
},
{
"NDCCode": "68462-181-47",
"PackageDescription": "45 g in 1 TUBE (68462-181-47) ",
"NDC11Code": "68462-0181-47",
"ProductNDC": "68462-181",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clotrimazole",
"NonProprietaryName": "Clotrimazole",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090219",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "CLOTRIMAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100804",
"SamplePackage": "N",
"IndicationAndUsage": "Clotrimazole cream USP is indicated for the topical treatment of candidiasis due to Candida albicans and tinea versicolor due to Malassezia furfur. Clotrimazole is also available as a nonprescription item which is indicated for the topical treatment of the following dermal infections: tinea pedis, tinea cruris, and tinea corporis due to Trichophyton rubrum, Trichophyton mentagrophytes, Epidermophyton floccosum, and Microsporum canis.",
"Description": "Clotrimazole cream USP, 1% contains clotrimazole USP, a synthetic antifungal agent having the chemical name {1-(o-Chloro-α, α-diphenylbenzyl)imidazole}; the molecular formula C22H17ClN2; a molecular weight of 344.84; and the structural formula:. Clotrimazole USP is an odorless, white crystalline substance. It is practically insoluble in water, sparingly soluble in ether and very soluble in polyethylene glycol 400, ethanol and chloroform. Each gram of clotrimazole cream USP contains 10 mg clotrimazole USP, dispersed in a vanishing cream base of sorbitan monostearate, polysorbate 60, cetyl esters wax, cetostearyl alcohol, octyldodecanol, purified water, and benzyl alcohol (1%) as preservative."
},
{
"NDCCode": "68462-299-47",
"PackageDescription": "45 g in 1 TUBE (68462-299-47) ",
"NDC11Code": "68462-0299-47",
"ProductNDC": "68462-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alclometasone Dipropionate",
"NonProprietaryName": "Alclometasone Dipropionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079227",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ALCLOMETASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090730",
"SamplePackage": "N",
"IndicationAndUsage": "Alclometasone dipropionate cream and ointment are low to medium potency corticosteroids indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Alclometasone dipropionate cream and ointment may be used in pediatric patients 1 year of age or older, although the safety and efficacy of drug use for longer than 3 weeks have not been established (see PRECAUTIONS: Pediatric Use). Since the safety and efficacy of alclometasone dipropionate cream and ointment have not been established in pediatric patients below 1 year of age, their use in this age-group is not recommended.",
"Description": "Alclometasone Dipropionate Cream USP, 0.05% and Alclometasone Dipropionate Ointment USP, 0.05% contain alclometasone dipropionate, USP (7α-chloro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate), a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, alclometasone dipropionate, USP is C28H37ClO7. It has the following structural formula:. Alclometasone dipropionate, USP has the molecular weight of 521.04 g/mol. It is a white to almost white crystalline powder, sparingly soluble in alcohol, acetone, ethyl acetate and acetonitrile. Each gram of Alclometasone Dipropionate Cream USP contains 0.5 mg of alclometasone dipropionate, USP in a hydrophilic, emollient cream base of propylene glycol, white petrolatum, cetearyl alcohol, mono and di-glycerides, PEG 100 stearate, ceteth-20, monobasic sodium phosphate, chlorocresol, phosphoric acid, and purified water. Each gram of Alclometasone Dipropionate Ointment USP contains 0.5 mg of alclometasone dipropionate, USP in an ointment base of hexylene glycol, white wax, propylene glycol monopalmitostearate, and white petrolatum."
},
{
"NDCCode": "68462-300-47",
"PackageDescription": "45 g in 1 TUBE (68462-300-47) ",
"NDC11Code": "68462-0300-47",
"ProductNDC": "68462-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alclometasone Dipropionate",
"NonProprietaryName": "Alclometasone Dipropionate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090623",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079061",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ALCLOMETASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20090623",
"SamplePackage": "N",
"IndicationAndUsage": "Alclometasone dipropionate cream and ointment are low to medium potency corticosteroids indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Alclometasone dipropionate cream and ointment may be used in pediatric patients 1 year of age or older, although the safety and efficacy of drug use for longer than 3 weeks have not been established (see PRECAUTIONS: Pediatric Use). Since the safety and efficacy of alclometasone dipropionate cream and ointment have not been established in pediatric patients below 1 year of age, their use in this age-group is not recommended.",
"Description": "Alclometasone Dipropionate Cream USP, 0.05% and Alclometasone Dipropionate Ointment USP, 0.05% contain alclometasone dipropionate, USP (7α-chloro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate), a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, alclometasone dipropionate, USP is C28H37ClO7. It has the following structural formula:. Alclometasone dipropionate, USP has the molecular weight of 521.04 g/mol. It is a white to almost white crystalline powder, sparingly soluble in alcohol, acetone, ethyl acetate and acetonitrile. Each gram of Alclometasone Dipropionate Cream USP contains 0.5 mg of alclometasone dipropionate, USP in a hydrophilic, emollient cream base of propylene glycol, white petrolatum, cetearyl alcohol, mono and di-glycerides, PEG 100 stearate, ceteth-20, monobasic sodium phosphate, chlorocresol, phosphoric acid, and purified water. Each gram of Alclometasone Dipropionate Ointment USP contains 0.5 mg of alclometasone dipropionate, USP in an ointment base of hexylene glycol, white wax, propylene glycol monopalmitostearate, and white petrolatum."
},
{
"NDCCode": "68462-301-47",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (68462-301-47) / 45 g in 1 BOTTLE, PUMP",
"NDC11Code": "68462-0301-47",
"ProductNDC": "68462-301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adapalene And Benzoyl Peroxide",
"NonProprietaryName": "Adapalene And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208108",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ADAPALENE; BENZOYL PEROXIDE",
"StrengthNumber": "1; 25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191108",
"SamplePackage": "N",
"IndicationAndUsage": "Adapalene and benzoyl peroxide gel is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.",
"Description": "Adapalene and Benzoyl Peroxide Gel, 0.1%/2.5% is a white to pale yellow, opaque gel for topical use containing adapalene, USP, 0.1%, and benzoyl peroxide, USP, 2.5%. Adapalene, USP a synthetic retinoid, is a naphthoic acid derivative with retinoid-like properties. The chemical name for adapalene, USP is 6-(4-Methoxy-3-(tricyclo [3.3.1.13,7 ]dec-1-ylphenyl)-2-naphthalene carboxylic acid . It has the following structural formula. Adapalene, USP. Molecular formula: C28H28O3 Molecular weight: 412.52 g/mol. Benzoyl peroxide, USP is a highly lipophilic oxidizing agent that localizes in both bacterial and keratinocyte cell membranes. The chemical name for benzoyl peroxide, USP is dibenzoyl peroxide. It has the following structural formula. Benzoyl Peroxide, USP. Molecular formula: C14H10O4 Molecular weight: 242.23 g/mol. Adapalene and Benzoyl Peroxide Gel contains the following inactive ingredients: carbomer homopolymer type C, cyclomethicone, docusate sodium, edetate disodium, glycerin, propylene glycol, poloxamer 124, purified water, sorbitan oleate and sodium hydroxide."
},
{
"NDCCode": "68462-455-47",
"PackageDescription": "45 g in 1 TUBE (68462-455-47) ",
"NDC11Code": "68462-0455-47",
"ProductNDC": "68462-455",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciclopirox",
"NonProprietaryName": "Ciclopirox",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120229",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091595",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "CICLOPIROX",
"StrengthNumber": "7.7",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Decreased DNA Replication [PE], Decreased Protein Synthesis [PE], Decreased RNA Replication [PE], Protein Synthesis Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120229",
"SamplePackage": "N",
"IndicationAndUsage": "Superficial Dermatophyte Infections. Ciclopirox gel is indicated for the topical treatment of interdigital tinea pedis and tinea corporis due to Trichophyton rubrum, Trichophyton mentagrophytes, or Epidermophyton floccosum. Seborrheic Dermatitis. Ciclopirox gel is indicated for the topical treatment of seborrheic dermatitis of the scalp.",
"Description": "Ciclopirox gel 0.77% contains a synthetic antifungal agent, ciclopirox USP. It is intended for topical dermatologic use only. Each gram of ciclopirox gel contains 7.70 mg of ciclopirox USP in a gel consisting of carbomer 940, isopropyl alcohol, and medium chain triglycerides, sodium hydroxide, sodium lauryl sulfate, and purified water. Ciclopirox gel is a white, slightly fluid gel. The chemical name for ciclopirox USP is 6-cyclohexyl-1-hydroxy-4-methyl-2(1H)-pyridinone, with the empirical formula C12H17NO2 and a molecular weight of 207.27. The CAS Registry Number is [29342-05-0]. The chemical structure is."
},
{
"NDCCode": "68462-464-47",
"PackageDescription": "45 g in 1 CARTON (68462-464-47) ",
"NDC11Code": "68462-0464-47",
"ProductNDC": "68462-464",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone Butyrate",
"NonProprietaryName": "Hydrocortisone Butyrate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20131205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202145",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20131205",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocortisone butyrate cream, 0.1% (lipophilic) is indicated for: : 1 Relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in adults. , 2 The topical treatment of mild to moderate atopic dermatitis in pediatric patients 3 months of age and older.",
"Description": "Hydrocortisone Butyrate Cream USP, 0.1% (Lipophilic) contains hydrocortisone butyrate, USP, a non-fluorinated hydrocortisone ester, for topical use. Hydrocortisone butyrate is a corticosteroid. The chemical name of hydrocortisone butyrate is [Pregn-4-ene-3, 20-dione, 11, 21-dihydroxy-17- [(1-oxobutyl) oxy (11β)-] It has the following structural formula. Hydrocortisone butyrate, USP is a white to practically white powder with a molecular weight of 432.56, and a molecular formula of C25H36O6. It is practically insoluble in water, slightly soluble in ether, soluble in methanol, in alcohol, and in acetone, and freely soluble in chloroform. Each gram of Hydrocortisone Butyrate Cream, 0.1% (lipophilic) contains 1 mg of hydrocortisone butyrate, USP in a hydrophilic base consisting of anhydrous citric acid, arlacel 165 (glyceryl stearate and PEG 100 stearate), butylparaben, cetostearyl alcohol, mineral oil, propylparaben, purified water, sodium citrate anhydrous, sorbitan monostearate, and white petrolatum."
},
{
"NDCCode": "68462-529-47",
"PackageDescription": "1 TUBE in 1 CARTON (68462-529-47) / 45 g in 1 TUBE",
"NDC11Code": "68462-0529-47",
"ProductNDC": "68462-529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209095",
"LabelerName": "Glenmark Pharmaceutcials Inc., USA",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180719",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate cream is a super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.",
"Description": "Clobetasol Propionate Cream USP, 0.05% contains the active compound clobetasol propionate, USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate, USP is 21-chloro-9-fluoro- 11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate, USP has the molecular formula C25H32CIFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Cream USP, 0.05% contains clobetasol propionate, USP 0.5 mg/g in a cream base composed of cetostearyl alcohol, chlorocresol, citric acid monohydrate, glyceryl monostearate, glyceryl stearate and PEG 100 stearate, propylene glycol, purified water, sodium citrate anhydrous and white wax."
},
{
"NDCCode": "68462-560-47",
"PackageDescription": "1 BOTTLE in 1 CARTON (68462-560-47) / 42.5 g in 1 BOTTLE",
"NDC11Code": "68462-0560-47",
"ProductNDC": "68462-560",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pirnuo",
"NonProprietaryName": "Mupirocin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201587",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "MUPIROCIN CALCIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/100g",
"Pharm_Classes": "RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190729",
"SamplePackage": "N",
"IndicationAndUsage": "PIRNUO cream is indicated for the treatment of secondarily infected traumatic skin lesions (up to 10 cm in length or 100 cm2 in area) due to susceptible isolates of Staphylococcus aureus (S. aureus) and Streptococcus pyogenes (S. pyogenes).",
"Description": "PIRNUOTM Cream (Mupirocin Cream USP, 2%) contains the dihydrate crystalline calcium hemi-salt of the RNA synthetase inhibitor antibacterial, mupirocin. Chemically, it is (αE,2S,3R,4R,5S)-5-[(2S,3S,4S,5S)-2,3-epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid, calcium salt (2:1), dihydrate. The molecular formula of mupirocin calcium, USP is (C26H43O9)2Ca2H2O, and the molecular weight is 1075.3 g/mol. The molecular weight of mupirocin free acid is 500.6 g/mol. The structural formula of mupirocin calcium, USP is. Figure 1. Structure of Mupirocin Calcium, USP. PIRNUOTM Cream (Mupirocin Cream USP, 2%) is a white cream that contains 20 mg (2% w/w) of mupirocin equivalent to 21.5 mg (2.15% w/w) of mupirocin calcium, USP in an oil- and water-based emulsion. The inactive ingredients are benzyl alcohol, glycerol monostearate, mineral oil, phenoxyethanol, polyoxyl 20 cetostearyl ether, purified water and xanthan gum."
},
{
"NDCCode": "68462-575-47",
"PackageDescription": "45 g in 1 TUBE (68462-575-47) ",
"NDC11Code": "68462-0575-47",
"ProductNDC": "68462-575",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone Valerate",
"NonProprietaryName": "Hydrocortisone Valerate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211129",
"LabelerName": "Glenamrk Pharmaceuticals Inc., USA",
"SubstanceName": "HYDROCORTISONE VALERATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20181015",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocortisone valerate cream, 0.2% is a medium potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses in adult patients.",
"Description": "Hydrocortisone Valerate Cream USP, 0.2% contains hydrocortisone valerate, USP, pregn-4-ene-3,20-dione, 11,21-dihydroxy-17-[(1-oxopentyl)oxy]-, (11β)-;cortisol 17-valerate or 11β,17,21-Trihydroxypregn-4-ene-3,20-dione 17-valerate, a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, hydrocortisone valerate, USP is C26H38O6. It has the following structural formula. Hydrocortisone valerate, USP has a molecular weight of 446.58. It is a white or almost white crystalline powder, freely soluble in acetone and dichloromethane; soluble in alcohol; insoluble in water.Each gram of Hydrocortisone Valerate Cream USP, 0.2% contains 2 mg hydrocortisone valerate, USP in a hydrophilic base composed of citric acid monohydrate, methylparaben, polyoxyl 2 stearyl ether, propylene glycol, purified water, sepineo P 600, steareth-100, stearyl alcohol, sodium lauryl sulfate and white petrolatum."
},
{
"NDCCode": "68462-836-47",
"PackageDescription": "1 TUBE in 1 CARTON (68462-836-47) / 45 g in 1 TUBE",
"NDC11Code": "68462-0836-47",
"ProductNDC": "68462-836",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone Valerate",
"NonProprietaryName": "Hydrocortisone Valerate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190305",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211750",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "HYDROCORTISONE VALERATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190305",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocortisone valerate ointment, 0.2% is a medium potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses in adult patients.",
"Description": "Hydrocortisone Valerate Ointment USP, 0.2% contains hydrocortisone valerate, USP, pregn-4-ene-3,20-dione, 11,21-dihydroxy-17-[(1-oxopentyl)oxy]-, (11β)-;cortisol 17-valerate or 11β,17,21-Trihydroxypregn-4-ene-3,20-dione 17-valerate, a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, hydrocortisone valerate, USP is C26H38O6. It has the following structural formula:Hydrocortisone valerate, USP has a molecular weight of 446.58. It is a white or almost white crystalline powder, freely soluble in acetone and dichloromethane; soluble in alcohol; insoluble in water.Each gram of Hydrocortisone Valerate Ointment, USP, 0.2% contains 2 mg hydrocortisone valerate, USP in a hydrophilic base composed of citric acid monohydrate, methyl paraben, mineral oil, polyoxyl stearyl ether, propylene glycol, sepineo P 600, steareth 100, stearyl alcohol, sodium lauryl sulfate, white petrolatum and purified water."
},
{
"NDCCode": "68462-465-99",
"PackageDescription": "18 POUCH in 1 CARTON (68462-465-99) / 1 BLISTER PACK in 1 POUCH / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "68462-0465-99",
"ProductNDC": "68462-465",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rizatriptan Benzoate",
"NonProprietaryName": "Rizatriptan Benzoate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201967",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "RIZATRIPTAN BENZOATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121231",
"SamplePackage": "N",
"IndicationAndUsage": "Rizatriptan benzoate tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use : 1 Rizatriptan benzoate tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks. , 2 Rizatriptan benzoate tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate tablets have not been established for cluster headache.",
"Description": "Rizatriptan benzoate tablets USP contain rizatriptan benzoate, USP, a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is:. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 391.47 g/mol. Rizatriptan benzoate, USP is a white to off-white powder that is soluble in methanol; sparingly soluble in water; slightly soluble in acetone and ethanol. Rizatriptan benzoate tablets USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: colloidal silicon dioxide, ferric oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose and pregelatinized corn starch."
},
{
"NDCCode": "68462-466-99",
"PackageDescription": "18 POUCH in 1 CARTON (68462-466-99) / 1 BLISTER PACK in 1 POUCH / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "68462-0466-99",
"ProductNDC": "68462-466",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rizatriptan Benzoate",
"NonProprietaryName": "Rizatriptan Benzoate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201967",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "RIZATRIPTAN BENZOATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121231",
"SamplePackage": "N",
"IndicationAndUsage": "Rizatriptan benzoate tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use : 1 Rizatriptan benzoate tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks. , 2 Rizatriptan benzoate tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate tablets have not been established for cluster headache.",
"Description": "Rizatriptan benzoate tablets USP contain rizatriptan benzoate, USP, a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is:. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 391.47 g/mol. Rizatriptan benzoate, USP is a white to off-white powder that is soluble in methanol; sparingly soluble in water; slightly soluble in acetone and ethanol. Rizatriptan benzoate tablets USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: colloidal silicon dioxide, ferric oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose and pregelatinized corn starch."
},
{
"NDCCode": "68462-467-06",
"PackageDescription": "6 BOX in 1 CARTON (68462-467-06) / 3 POUCH in 1 BOX (68462-467-46) / 1 BLISTER PACK in 1 POUCH / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "68462-0467-06",
"ProductNDC": "68462-467",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rizatriptan Benzoate",
"NonProprietaryName": "Rizatriptan Benzoate",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20130701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201914",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "RIZATRIPTAN BENZOATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130701",
"SamplePackage": "N",
"IndicationAndUsage": "Rizatriptan benzoate orally disintegrating tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use : 1 Rizatriptan benzoate orally disintegrating tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate orally disintegrating tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate orally disintegrating tablets are administered to treat any subsequent attacks. , 2 Rizatriptan benzoate orally disintegrating tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate orally disintegrating tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate orally disintegrating tablets have not been established for cluster headache.",
"Description": "Rizatriptan benzoate orally disintegrating tablets, USP contain rizatriptan benzoate, USP a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is:. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 391.47 g/mol. Rizatriptan benzoate is a white to off-white powder that is soluble in methanol; sparingly soluble in water; slightly soluble in acetone and ethanol. Rizatriptan benzoate orally disintegrating tablets, USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each orally disintegrating tablet contains the following inactive ingredients: aspartame, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose and peppermint flavor. Meet USP Dissolution Test 2."
},
{
"NDCCode": "68462-468-06",
"PackageDescription": "6 BOX in 1 CARTON (68462-468-06) / 3 POUCH in 1 BOX (68462-468-46) / 1 BLISTER PACK in 1 POUCH / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "68462-0468-06",
"ProductNDC": "68462-468",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rizatriptan Benzoate",
"NonProprietaryName": "Rizatriptan Benzoate",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20130701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201914",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "RIZATRIPTAN BENZOATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130701",
"SamplePackage": "N",
"IndicationAndUsage": "Rizatriptan benzoate orally disintegrating tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use : 1 Rizatriptan benzoate orally disintegrating tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate orally disintegrating tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate orally disintegrating tablets are administered to treat any subsequent attacks. , 2 Rizatriptan benzoate orally disintegrating tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate orally disintegrating tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate orally disintegrating tablets have not been established for cluster headache.",
"Description": "Rizatriptan benzoate orally disintegrating tablets, USP contain rizatriptan benzoate, USP a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is:. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 391.47 g/mol. Rizatriptan benzoate is a white to off-white powder that is soluble in methanol; sparingly soluble in water; slightly soluble in acetone and ethanol. Rizatriptan benzoate orally disintegrating tablets, USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each orally disintegrating tablet contains the following inactive ingredients: aspartame, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose and peppermint flavor. Meet USP Dissolution Test 2."
},
{
"NDCCode": "0006-3516-59",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0006-3516-59) / 100 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00006-3516-59",
"ProductNDC": "0006-3516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primaxin",
"ProprietaryNameSuffix": "Iv",
"NonProprietaryName": "Imipenem And Cilastatin Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19851126",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050587",
"LabelerName": "Merck Sharp & Dohme LLC",
"SubstanceName": "IMIPENEM; CILASTATIN SODIUM",
"StrengthNumber": "500; 500",
"StrengthUnit": "mg/100mL; mg/100mL",
"Pharm_Classes": "Carbapenems [CS], Dipeptidase Inhibitors [MoA], Penem Antibacterial [EPC], Renal Dehydropeptidase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19851126",
"SamplePackage": "N",
"IndicationAndUsage": "PRIMAXIN for intravenous use is a combination of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor, indicated for the treatment of the following serious infections caused by designated susceptible bacteria: 1 Lower respiratory tract infections. (1.1), 2 Urinary tract infections. (1.2), 3 Intra-abdominal infections. (1.3), 4 Gynecologic infections. (1.4), 5 Bacterial septicemia. (1.5), 6 Bone and joint infections. (1.6), 7 Skin and skin structure infections. (1.7), 8 Endocarditis. (1.8).",
"Description": "PRIMAXIN (imipenem and cilastatin) for Injection is a sterile formulation of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor with sodium bicarbonate added as a buffer. PRIMAXIN is an antibacterial drug for intravenous administration. Imipenem (N-formimidoylthienamycin monohydrate) is a crystalline derivative of thienamycin, which is produced by Streptomyces cattleya. Its chemical name is (5R,6S)-3-[[2-(formimidoylamino)ethyl]thio]-6-[(R)-1-hydroxyethyl]-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monohydrate. It is an off-white, nonhygroscopic crystalline compound with a molecular weight of 317.37. It is sparingly soluble in water and slightly soluble in methanol. Its empirical formula is C12H17N3O4S∙H2O, and its structural formula is. Cilastatin sodium is the sodium salt of a derivatized heptenoic acid. Its chemical name is sodium (Z)-7[[(R)-2-amino-2-carboxyethyl]thio]-2-[(S)-2,2-dimethylcyclopropanecarboxamido]-2-heptenoate. It is an off-white to yellowish-white, hygroscopic, amorphous compound with a molecular weight of 380.43. It is very soluble in water and in methanol. Its empirical formula is C16H25N2O5SNa, and its structural formula is. Each single-dose vial of PRIMAXIN contains 500 mg imipenem (equivalent to 530 mg imipenem monohydrate), 500 mg cilastatin (equivalent to 531 mg cilastatin sodium), and 20 mg sodium bicarbonate (used as a buffer). PRIMAXIN is buffered to provide solutions in the pH range of 6.5 to 8.5. There is no significant change in pH when solutions are prepared and used as directed [see How Supplied/Storage and Handling (16.1)]. PRIMAXIN 500 contains 37.5 mg of sodium (1.6 mEq). Solutions of PRIMAXIN range from colorless to yellow. Variations of color within this range do not affect the potency of the product."
},
{
"NDCCode": "0008-1123-12",
"PackageDescription": "1 POUCH in 1 CARTON (0008-1123-12) / 2 BLISTER PACK in 1 POUCH / 15 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "00008-1123-12",
"ProductNDC": "0008-1123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duavee",
"NonProprietaryName": "Conjugated Estrogens/bazedoxifene",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20131003",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022247",
"LabelerName": "Wyeth Pharmaceuticals LLC, a subsidiary of Pfizer Inc.",
"SubstanceName": "ESTROGENS, CONJUGATED; BAZEDOXIFENE ACETATE",
"StrengthNumber": ".45; 20",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Estrogen Agonist/Antagonist [EPC], Estrogen Receptor Agonists [MoA], Estrogen [EPC], Estrogens, Conjugated (USP) [CS], Selective Estrogen Receptor Modulators [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20131003",
"SamplePackage": "N",
"IndicationAndUsage": "DUAVEE is indicated in women with a uterus for.",
"Description": "DUAVEE (conjugated estrogens/bazedoxifene), contains conjugated estrogens with bazedoxifene, an estrogen agonist/antagonist. Conjugated estrogens are purified from pregnant mares' urine and consist of the sodium salts of water-soluble estrogen sulfates blended to represent the average composition of material derived from pregnant mares' urine. Conjugated estrogens are a mixture of sodium estrone sulfate and sodium equilin sulfate, and also contain as concomitant components, sodium sulfate conjugates, 17α-dihydroequilin, 17α-estradiol, and 17β-dihydroequilin. Bazedoxifene is supplied as the acetate salt (bazedoxifene acetate) and has the chemical name 1H-Indol-5-ol, 1-[[4-[2-(hexahydro-1H-azepin-1-yl) ethoxy]phenyl]methyl]-2-(4-hydroxyphenyl)-3-methyl-, monoacetate. The empirical formula is C30H34N2O3 ∙ C2H4O2, and the molecular weight is 530.65. Bazedoxifene acetate is a white to tan powder. The aqueous solubility of bazedoxifene is pH-dependent. Solubility is higher at lower pH. The solubility of bazedoxifene acetate in unbuffered sterile water was measured to be 923 microgramsA/mL at pH 5.4. The following represents the chemical structure of bazedoxifene acetate:. DUAVEE is available for oral administration as tablets containing 0.45 mg of conjugated estrogens with 20 mg of bazedoxifene (equivalent to 22.6 mg of bazedoxifene acetate). Each tablet of DUAVEE contains the following inactive ingredients: calcium phosphate tribasic, hydroxypropyl cellulose, microcrystalline cellulose, powdered cellulose, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, sucrose, ascorbic acid, sucrose palmitic acid ester, hydroxyethylcellulose, titanium dioxide, red iron oxide, yellow iron oxide, black iron oxide, povidone, polydextrose, maltitol, poloxamer 188, propylene glycol, and isopropyl alcohol."
},
{
"NDCCode": "0069-0135-01",
"PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (0069-0135-01) ",
"NDC11Code": "00069-0135-01",
"ProductNDC": "0069-0135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120904",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203341",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120904",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "0069-0136-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0069-0136-01) ",
"NDC11Code": "00069-0136-01",
"ProductNDC": "0069-0136",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120904",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203341",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120904",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "0069-0193-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0069-0193-01) ",
"NDC11Code": "00069-0193-01",
"ProductNDC": "0069-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171218",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203341",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171218",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "0069-0504-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (0069-0504-30) ",
"NDC11Code": "00069-0504-30",
"ProductNDC": "0069-0504",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240102",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217729",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240102",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "0069-1014-15",
"PackageDescription": "150 CAPSULE in 1 BOTTLE (0069-1014-15) ",
"NDC11Code": "00069-1014-15",
"ProductNDC": "0069-1014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240102",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217729",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240102",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "0143-9295-01",
"PackageDescription": "1 VIAL in 1 BOX (0143-9295-01) / 1 mL in 1 VIAL",
"NDC11Code": "00143-9295-01",
"ProductNDC": "0143-9295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol Decanoate",
"NonProprietaryName": "Haloperidol Decanoate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19981001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075305",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HALOPERIDOL DECANOATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19981001",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol Decanoate Injection is indicated for the treatment of patients with schizophrenia who require prolonged parenteral antipsychotic therapy.",
"Description": "Haloperidol decanoate is the decanoate ester of the butyrophenone, haloperidol. It has a markedly extended duration of effect. It is available in sesame oil in sterile form for intramuscular (IM) injection. The structural formula of haloperidol decanoate, 4-[4-(p-chlorophenyl)-4-hydroxypiperidino]-4’-fluorobutyrophenone decanoate, is. Molecular Formula: C31H41ClFNO3 M.W. 530.13. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL), but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection, 100 mg/mL, contains 141.04 mg haloperidol decanoate, equivalent to 100 mg haloperidol, in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative."
},
{
"NDCCode": "0143-9296-01",
"PackageDescription": "1 VIAL in 1 BOX (0143-9296-01) / 5 mL in 1 VIAL",
"NDC11Code": "00143-9296-01",
"ProductNDC": "0143-9296",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol Decanoate",
"NonProprietaryName": "Haloperidol Decanoate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19981001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075305",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HALOPERIDOL DECANOATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19981001",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol Decanoate Injection is indicated for the treatment of patients with schizophrenia who require prolonged parenteral antipsychotic therapy.",
"Description": "Haloperidol decanoate is the decanoate ester of the butyrophenone, haloperidol. It has a markedly extended duration of effect. It is available in sesame oil in sterile form for intramuscular (IM) injection. The structural formula of haloperidol decanoate, 4-[4-(p-chlorophenyl)-4-hydroxypiperidino]-4’-fluorobutyrophenone decanoate, is. Molecular Formula: C31H41ClFNO3 M.W. 530.13. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL), but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection, 100 mg/mL, contains 141.04 mg haloperidol decanoate, equivalent to 100 mg haloperidol, in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative."
},
{
"NDCCode": "0395-0055-16",
"PackageDescription": "473 mL in 1 BOTTLE, PLASTIC (0395-0055-16)",
"NDC11Code": "00395-0055-16",
"ProductNDC": "0395-0055",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humco Aluminum Acetate (burrow)",
"NonProprietaryName": "Aluminum Acetate",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "19980325",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Humco Holding Group, Inc.",
"SubstanceName": "ALUMINUM ACETATE",
"StrengthNumber": "530",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2017-08-29"
},
{
"NDCCode": "0409-4164-03",
"PackageDescription": "12 POUCH in 1 CASE (0409-4164-03) > 1 BAG in 1 POUCH > 500 mL in 1 BAG",
"NDC11Code": "00409-4164-03",
"ProductNDC": "0409-4164",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn Ii",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Histidine, Proline, Serine, N-acetyl-tyrosine, And Glycine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019438",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; HISTIDINE; PROLINE; SERINE; N-ACETYLTYROSINE; GLYCINE",
"StrengthNumber": "660; 1000; 1050; 172; 298; 400; 200; 500; 993; 1018; 700; 738; 300; 722; 530; 270; 500",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC],Amino Acids [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-04-18",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0409-4164-05",
"PackageDescription": "6 POUCH in 1 CASE (0409-4164-05) > 1 BAG in 1 POUCH > 1000 mL in 1 BAG",
"NDC11Code": "00409-4164-05",
"ProductNDC": "0409-4164",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn Ii",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Histidine, Proline, Serine, N-acetyl-tyrosine, And Glycine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019438",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; HISTIDINE; PROLINE; SERINE; N-ACETYLTYROSINE; GLYCINE",
"StrengthNumber": "660; 1000; 1050; 172; 298; 400; 200; 500; 993; 1018; 700; 738; 300; 722; 530; 270; 500",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC],Amino Acids [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-04-18",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68462-530-47</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (68462-530-47) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>68462-0530-47</NDC11Code>
<ProductNDC>68462-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208933</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate ointment is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 grams per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
<Description>Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate USP is 21-Chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate USP has the empirical formula of C25H32ClFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Ointment USP, 0.05% contains clobetasol propionate USP 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>68462-530-17</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (68462-530-17) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>68462-0530-17</NDC11Code>
<ProductNDC>68462-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208933</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate ointment is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 grams per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
<Description>Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate USP is 21-Chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate USP has the empirical formula of C25H32ClFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Ointment USP, 0.05% contains clobetasol propionate USP 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>68462-530-35</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (68462-530-35) / 30 g in 1 TUBE</PackageDescription>
<NDC11Code>68462-0530-35</NDC11Code>
<ProductNDC>68462-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208933</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate ointment is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 grams per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
<Description>Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate USP is 21-Chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate USP has the empirical formula of C25H32ClFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Ointment USP, 0.05% contains clobetasol propionate USP 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>68462-530-65</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (68462-530-65) / 60 g in 1 TUBE</PackageDescription>
<NDC11Code>68462-0530-65</NDC11Code>
<ProductNDC>68462-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208933</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate ointment is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 grams per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
<Description>Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate USP is 21-Chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate USP has the empirical formula of C25H32ClFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Ointment USP, 0.05% contains clobetasol propionate USP 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>68462-181-47</NDCCode>
<PackageDescription>45 g in 1 TUBE (68462-181-47) </PackageDescription>
<NDC11Code>68462-0181-47</NDC11Code>
<ProductNDC>68462-181</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clotrimazole</ProprietaryName>
<NonProprietaryName>Clotrimazole</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090219</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>CLOTRIMAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clotrimazole cream USP is indicated for the topical treatment of candidiasis due to Candida albicans and tinea versicolor due to Malassezia furfur. Clotrimazole is also available as a nonprescription item which is indicated for the topical treatment of the following dermal infections: tinea pedis, tinea cruris, and tinea corporis due to Trichophyton rubrum, Trichophyton mentagrophytes, Epidermophyton floccosum, and Microsporum canis.</IndicationAndUsage>
<Description>Clotrimazole cream USP, 1% contains clotrimazole USP, a synthetic antifungal agent having the chemical name {1-(o-Chloro-α, α-diphenylbenzyl)imidazole}; the molecular formula C22H17ClN2; a molecular weight of 344.84; and the structural formula:. Clotrimazole USP is an odorless, white crystalline substance. It is practically insoluble in water, sparingly soluble in ether and very soluble in polyethylene glycol 400, ethanol and chloroform. Each gram of clotrimazole cream USP contains 10 mg clotrimazole USP, dispersed in a vanishing cream base of sorbitan monostearate, polysorbate 60, cetyl esters wax, cetostearyl alcohol, octyldodecanol, purified water, and benzyl alcohol (1%) as preservative.</Description>
</NDC>
<NDC>
<NDCCode>68462-299-47</NDCCode>
<PackageDescription>45 g in 1 TUBE (68462-299-47) </PackageDescription>
<NDC11Code>68462-0299-47</NDC11Code>
<ProductNDC>68462-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alclometasone Dipropionate</ProprietaryName>
<NonProprietaryName>Alclometasone Dipropionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079227</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ALCLOMETASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alclometasone dipropionate cream and ointment are low to medium potency corticosteroids indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Alclometasone dipropionate cream and ointment may be used in pediatric patients 1 year of age or older, although the safety and efficacy of drug use for longer than 3 weeks have not been established (see PRECAUTIONS: Pediatric Use). Since the safety and efficacy of alclometasone dipropionate cream and ointment have not been established in pediatric patients below 1 year of age, their use in this age-group is not recommended.</IndicationAndUsage>
<Description>Alclometasone Dipropionate Cream USP, 0.05% and Alclometasone Dipropionate Ointment USP, 0.05% contain alclometasone dipropionate, USP (7α-chloro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate), a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, alclometasone dipropionate, USP is C28H37ClO7. It has the following structural formula:. Alclometasone dipropionate, USP has the molecular weight of 521.04 g/mol. It is a white to almost white crystalline powder, sparingly soluble in alcohol, acetone, ethyl acetate and acetonitrile. Each gram of Alclometasone Dipropionate Cream USP contains 0.5 mg of alclometasone dipropionate, USP in a hydrophilic, emollient cream base of propylene glycol, white petrolatum, cetearyl alcohol, mono and di-glycerides, PEG 100 stearate, ceteth-20, monobasic sodium phosphate, chlorocresol, phosphoric acid, and purified water. Each gram of Alclometasone Dipropionate Ointment USP contains 0.5 mg of alclometasone dipropionate, USP in an ointment base of hexylene glycol, white wax, propylene glycol monopalmitostearate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>68462-300-47</NDCCode>
<PackageDescription>45 g in 1 TUBE (68462-300-47) </PackageDescription>
<NDC11Code>68462-0300-47</NDC11Code>
<ProductNDC>68462-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alclometasone Dipropionate</ProprietaryName>
<NonProprietaryName>Alclometasone Dipropionate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090623</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079061</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ALCLOMETASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alclometasone dipropionate cream and ointment are low to medium potency corticosteroids indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Alclometasone dipropionate cream and ointment may be used in pediatric patients 1 year of age or older, although the safety and efficacy of drug use for longer than 3 weeks have not been established (see PRECAUTIONS: Pediatric Use). Since the safety and efficacy of alclometasone dipropionate cream and ointment have not been established in pediatric patients below 1 year of age, their use in this age-group is not recommended.</IndicationAndUsage>
<Description>Alclometasone Dipropionate Cream USP, 0.05% and Alclometasone Dipropionate Ointment USP, 0.05% contain alclometasone dipropionate, USP (7α-chloro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate), a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, alclometasone dipropionate, USP is C28H37ClO7. It has the following structural formula:. Alclometasone dipropionate, USP has the molecular weight of 521.04 g/mol. It is a white to almost white crystalline powder, sparingly soluble in alcohol, acetone, ethyl acetate and acetonitrile. Each gram of Alclometasone Dipropionate Cream USP contains 0.5 mg of alclometasone dipropionate, USP in a hydrophilic, emollient cream base of propylene glycol, white petrolatum, cetearyl alcohol, mono and di-glycerides, PEG 100 stearate, ceteth-20, monobasic sodium phosphate, chlorocresol, phosphoric acid, and purified water. Each gram of Alclometasone Dipropionate Ointment USP contains 0.5 mg of alclometasone dipropionate, USP in an ointment base of hexylene glycol, white wax, propylene glycol monopalmitostearate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>68462-301-47</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (68462-301-47) / 45 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>68462-0301-47</NDC11Code>
<ProductNDC>68462-301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adapalene And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Adapalene And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208108</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ADAPALENE; BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>1; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adapalene and benzoyl peroxide gel is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.</IndicationAndUsage>
<Description>Adapalene and Benzoyl Peroxide Gel, 0.1%/2.5% is a white to pale yellow, opaque gel for topical use containing adapalene, USP, 0.1%, and benzoyl peroxide, USP, 2.5%. Adapalene, USP a synthetic retinoid, is a naphthoic acid derivative with retinoid-like properties. The chemical name for adapalene, USP is 6-(4-Methoxy-3-(tricyclo [3.3.1.13,7 ]dec-1-ylphenyl)-2-naphthalene carboxylic acid . It has the following structural formula. Adapalene, USP. Molecular formula: C28H28O3 Molecular weight: 412.52 g/mol. Benzoyl peroxide, USP is a highly lipophilic oxidizing agent that localizes in both bacterial and keratinocyte cell membranes. The chemical name for benzoyl peroxide, USP is dibenzoyl peroxide. It has the following structural formula. Benzoyl Peroxide, USP. Molecular formula: C14H10O4 Molecular weight: 242.23 g/mol. Adapalene and Benzoyl Peroxide Gel contains the following inactive ingredients: carbomer homopolymer type C, cyclomethicone, docusate sodium, edetate disodium, glycerin, propylene glycol, poloxamer 124, purified water, sorbitan oleate and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>68462-455-47</NDCCode>
<PackageDescription>45 g in 1 TUBE (68462-455-47) </PackageDescription>
<NDC11Code>68462-0455-47</NDC11Code>
<ProductNDC>68462-455</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciclopirox</ProprietaryName>
<NonProprietaryName>Ciclopirox</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120229</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091595</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>CICLOPIROX</SubstanceName>
<StrengthNumber>7.7</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Decreased DNA Replication [PE], Decreased Protein Synthesis [PE], Decreased RNA Replication [PE], Protein Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120229</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Superficial Dermatophyte Infections. Ciclopirox gel is indicated for the topical treatment of interdigital tinea pedis and tinea corporis due to Trichophyton rubrum, Trichophyton mentagrophytes, or Epidermophyton floccosum. Seborrheic Dermatitis. Ciclopirox gel is indicated for the topical treatment of seborrheic dermatitis of the scalp.</IndicationAndUsage>
<Description>Ciclopirox gel 0.77% contains a synthetic antifungal agent, ciclopirox USP. It is intended for topical dermatologic use only. Each gram of ciclopirox gel contains 7.70 mg of ciclopirox USP in a gel consisting of carbomer 940, isopropyl alcohol, and medium chain triglycerides, sodium hydroxide, sodium lauryl sulfate, and purified water. Ciclopirox gel is a white, slightly fluid gel. The chemical name for ciclopirox USP is 6-cyclohexyl-1-hydroxy-4-methyl-2(1H)-pyridinone, with the empirical formula C12H17NO2 and a molecular weight of 207.27. The CAS Registry Number is [29342-05-0]. The chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>68462-464-47</NDCCode>
<PackageDescription>45 g in 1 CARTON (68462-464-47) </PackageDescription>
<NDC11Code>68462-0464-47</NDC11Code>
<ProductNDC>68462-464</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone Butyrate</ProprietaryName>
<NonProprietaryName>Hydrocortisone Butyrate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20131205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202145</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocortisone butyrate cream, 0.1% (lipophilic) is indicated for: : 1 Relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in adults. , 2 The topical treatment of mild to moderate atopic dermatitis in pediatric patients 3 months of age and older.</IndicationAndUsage>
<Description>Hydrocortisone Butyrate Cream USP, 0.1% (Lipophilic) contains hydrocortisone butyrate, USP, a non-fluorinated hydrocortisone ester, for topical use. Hydrocortisone butyrate is a corticosteroid. The chemical name of hydrocortisone butyrate is [Pregn-4-ene-3, 20-dione, 11, 21-dihydroxy-17- [(1-oxobutyl) oxy (11β)-] It has the following structural formula. Hydrocortisone butyrate, USP is a white to practically white powder with a molecular weight of 432.56, and a molecular formula of C25H36O6. It is practically insoluble in water, slightly soluble in ether, soluble in methanol, in alcohol, and in acetone, and freely soluble in chloroform. Each gram of Hydrocortisone Butyrate Cream, 0.1% (lipophilic) contains 1 mg of hydrocortisone butyrate, USP in a hydrophilic base consisting of anhydrous citric acid, arlacel 165 (glyceryl stearate and PEG 100 stearate), butylparaben, cetostearyl alcohol, mineral oil, propylparaben, purified water, sodium citrate anhydrous, sorbitan monostearate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>68462-529-47</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (68462-529-47) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>68462-0529-47</NDC11Code>
<ProductNDC>68462-529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209095</ApplicationNumber>
<LabelerName>Glenmark Pharmaceutcials Inc., USA</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate cream is a super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
<Description>Clobetasol Propionate Cream USP, 0.05% contains the active compound clobetasol propionate, USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate, USP is 21-chloro-9-fluoro- 11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate, USP has the molecular formula C25H32CIFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Cream USP, 0.05% contains clobetasol propionate, USP 0.5 mg/g in a cream base composed of cetostearyl alcohol, chlorocresol, citric acid monohydrate, glyceryl monostearate, glyceryl stearate and PEG 100 stearate, propylene glycol, purified water, sodium citrate anhydrous and white wax.</Description>
</NDC>
<NDC>
<NDCCode>68462-560-47</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (68462-560-47) / 42.5 g in 1 BOTTLE</PackageDescription>
<NDC11Code>68462-0560-47</NDC11Code>
<ProductNDC>68462-560</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pirnuo</ProprietaryName>
<NonProprietaryName>Mupirocin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201587</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>MUPIROCIN CALCIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PIRNUO cream is indicated for the treatment of secondarily infected traumatic skin lesions (up to 10 cm in length or 100 cm2 in area) due to susceptible isolates of Staphylococcus aureus (S. aureus) and Streptococcus pyogenes (S. pyogenes).</IndicationAndUsage>
<Description>PIRNUOTM Cream (Mupirocin Cream USP, 2%) contains the dihydrate crystalline calcium hemi-salt of the RNA synthetase inhibitor antibacterial, mupirocin. Chemically, it is (αE,2S,3R,4R,5S)-5-[(2S,3S,4S,5S)-2,3-epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid, calcium salt (2:1), dihydrate. The molecular formula of mupirocin calcium, USP is (C26H43O9)2Ca2H2O, and the molecular weight is 1075.3 g/mol. The molecular weight of mupirocin free acid is 500.6 g/mol. The structural formula of mupirocin calcium, USP is. Figure 1. Structure of Mupirocin Calcium, USP. PIRNUOTM Cream (Mupirocin Cream USP, 2%) is a white cream that contains 20 mg (2% w/w) of mupirocin equivalent to 21.5 mg (2.15% w/w) of mupirocin calcium, USP in an oil- and water-based emulsion. The inactive ingredients are benzyl alcohol, glycerol monostearate, mineral oil, phenoxyethanol, polyoxyl 20 cetostearyl ether, purified water and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>68462-575-47</NDCCode>
<PackageDescription>45 g in 1 TUBE (68462-575-47) </PackageDescription>
<NDC11Code>68462-0575-47</NDC11Code>
<ProductNDC>68462-575</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone Valerate</ProprietaryName>
<NonProprietaryName>Hydrocortisone Valerate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211129</ApplicationNumber>
<LabelerName>Glenamrk Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>HYDROCORTISONE VALERATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocortisone valerate cream, 0.2% is a medium potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses in adult patients.</IndicationAndUsage>
<Description>Hydrocortisone Valerate Cream USP, 0.2% contains hydrocortisone valerate, USP, pregn-4-ene-3,20-dione, 11,21-dihydroxy-17-[(1-oxopentyl)oxy]-, (11β)-;cortisol 17-valerate or 11β,17,21-Trihydroxypregn-4-ene-3,20-dione 17-valerate, a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, hydrocortisone valerate, USP is C26H38O6. It has the following structural formula. Hydrocortisone valerate, USP has a molecular weight of 446.58. It is a white or almost white crystalline powder, freely soluble in acetone and dichloromethane; soluble in alcohol; insoluble in water.Each gram of Hydrocortisone Valerate Cream USP, 0.2% contains 2 mg hydrocortisone valerate, USP in a hydrophilic base composed of citric acid monohydrate, methylparaben, polyoxyl 2 stearyl ether, propylene glycol, purified water, sepineo P 600, steareth-100, stearyl alcohol, sodium lauryl sulfate and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>68462-836-47</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (68462-836-47) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>68462-0836-47</NDC11Code>
<ProductNDC>68462-836</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone Valerate</ProprietaryName>
<NonProprietaryName>Hydrocortisone Valerate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190305</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211750</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>HYDROCORTISONE VALERATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocortisone valerate ointment, 0.2% is a medium potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses in adult patients.</IndicationAndUsage>
<Description>Hydrocortisone Valerate Ointment USP, 0.2% contains hydrocortisone valerate, USP, pregn-4-ene-3,20-dione, 11,21-dihydroxy-17-[(1-oxopentyl)oxy]-, (11β)-;cortisol 17-valerate or 11β,17,21-Trihydroxypregn-4-ene-3,20-dione 17-valerate, a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, hydrocortisone valerate, USP is C26H38O6. It has the following structural formula:Hydrocortisone valerate, USP has a molecular weight of 446.58. It is a white or almost white crystalline powder, freely soluble in acetone and dichloromethane; soluble in alcohol; insoluble in water.Each gram of Hydrocortisone Valerate Ointment, USP, 0.2% contains 2 mg hydrocortisone valerate, USP in a hydrophilic base composed of citric acid monohydrate, methyl paraben, mineral oil, polyoxyl stearyl ether, propylene glycol, sepineo P 600, steareth 100, stearyl alcohol, sodium lauryl sulfate, white petrolatum and purified water.</Description>
</NDC>
<NDC>
<NDCCode>68462-465-99</NDCCode>
<PackageDescription>18 POUCH in 1 CARTON (68462-465-99) / 1 BLISTER PACK in 1 POUCH / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0465-99</NDC11Code>
<ProductNDC>68462-465</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rizatriptan Benzoate</ProprietaryName>
<NonProprietaryName>Rizatriptan Benzoate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121231</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201967</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>RIZATRIPTAN BENZOATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rizatriptan benzoate tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use : 1 Rizatriptan benzoate tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks. , 2 Rizatriptan benzoate tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate tablets have not been established for cluster headache.</IndicationAndUsage>
<Description>Rizatriptan benzoate tablets USP contain rizatriptan benzoate, USP, a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is:. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 391.47 g/mol. Rizatriptan benzoate, USP is a white to off-white powder that is soluble in methanol; sparingly soluble in water; slightly soluble in acetone and ethanol. Rizatriptan benzoate tablets USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: colloidal silicon dioxide, ferric oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose and pregelatinized corn starch.</Description>
</NDC>
<NDC>
<NDCCode>68462-466-99</NDCCode>
<PackageDescription>18 POUCH in 1 CARTON (68462-466-99) / 1 BLISTER PACK in 1 POUCH / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0466-99</NDC11Code>
<ProductNDC>68462-466</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rizatriptan Benzoate</ProprietaryName>
<NonProprietaryName>Rizatriptan Benzoate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121231</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201967</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>RIZATRIPTAN BENZOATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rizatriptan benzoate tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use : 1 Rizatriptan benzoate tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks. , 2 Rizatriptan benzoate tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate tablets have not been established for cluster headache.</IndicationAndUsage>
<Description>Rizatriptan benzoate tablets USP contain rizatriptan benzoate, USP, a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is:. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 391.47 g/mol. Rizatriptan benzoate, USP is a white to off-white powder that is soluble in methanol; sparingly soluble in water; slightly soluble in acetone and ethanol. Rizatriptan benzoate tablets USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: colloidal silicon dioxide, ferric oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose and pregelatinized corn starch.</Description>
</NDC>
<NDC>
<NDCCode>68462-467-06</NDCCode>
<PackageDescription>6 BOX in 1 CARTON (68462-467-06) / 3 POUCH in 1 BOX (68462-467-46) / 1 BLISTER PACK in 1 POUCH / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0467-06</NDC11Code>
<ProductNDC>68462-467</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rizatriptan Benzoate</ProprietaryName>
<NonProprietaryName>Rizatriptan Benzoate</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201914</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>RIZATRIPTAN BENZOATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rizatriptan benzoate orally disintegrating tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use : 1 Rizatriptan benzoate orally disintegrating tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate orally disintegrating tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate orally disintegrating tablets are administered to treat any subsequent attacks. , 2 Rizatriptan benzoate orally disintegrating tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate orally disintegrating tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate orally disintegrating tablets have not been established for cluster headache.</IndicationAndUsage>
<Description>Rizatriptan benzoate orally disintegrating tablets, USP contain rizatriptan benzoate, USP a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is:. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 391.47 g/mol. Rizatriptan benzoate is a white to off-white powder that is soluble in methanol; sparingly soluble in water; slightly soluble in acetone and ethanol. Rizatriptan benzoate orally disintegrating tablets, USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each orally disintegrating tablet contains the following inactive ingredients: aspartame, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose and peppermint flavor. Meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>68462-468-06</NDCCode>
<PackageDescription>6 BOX in 1 CARTON (68462-468-06) / 3 POUCH in 1 BOX (68462-468-46) / 1 BLISTER PACK in 1 POUCH / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0468-06</NDC11Code>
<ProductNDC>68462-468</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rizatriptan Benzoate</ProprietaryName>
<NonProprietaryName>Rizatriptan Benzoate</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201914</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>RIZATRIPTAN BENZOATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rizatriptan benzoate orally disintegrating tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use : 1 Rizatriptan benzoate orally disintegrating tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate orally disintegrating tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate orally disintegrating tablets are administered to treat any subsequent attacks. , 2 Rizatriptan benzoate orally disintegrating tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate orally disintegrating tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate orally disintegrating tablets have not been established for cluster headache.</IndicationAndUsage>
<Description>Rizatriptan benzoate orally disintegrating tablets, USP contain rizatriptan benzoate, USP a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is:. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 391.47 g/mol. Rizatriptan benzoate is a white to off-white powder that is soluble in methanol; sparingly soluble in water; slightly soluble in acetone and ethanol. Rizatriptan benzoate orally disintegrating tablets, USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each orally disintegrating tablet contains the following inactive ingredients: aspartame, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose and peppermint flavor. Meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>0006-3516-59</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0006-3516-59) / 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00006-3516-59</NDC11Code>
<ProductNDC>0006-3516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primaxin</ProprietaryName>
<ProprietaryNameSuffix>Iv</ProprietaryNameSuffix>
<NonProprietaryName>Imipenem And Cilastatin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19851126</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050587</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme LLC</LabelerName>
<SubstanceName>IMIPENEM; CILASTATIN SODIUM</SubstanceName>
<StrengthNumber>500; 500</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Dipeptidase Inhibitors [MoA], Penem Antibacterial [EPC], Renal Dehydropeptidase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PRIMAXIN for intravenous use is a combination of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor, indicated for the treatment of the following serious infections caused by designated susceptible bacteria: 1 Lower respiratory tract infections. (1.1), 2 Urinary tract infections. (1.2), 3 Intra-abdominal infections. (1.3), 4 Gynecologic infections. (1.4), 5 Bacterial septicemia. (1.5), 6 Bone and joint infections. (1.6), 7 Skin and skin structure infections. (1.7), 8 Endocarditis. (1.8).</IndicationAndUsage>
<Description>PRIMAXIN (imipenem and cilastatin) for Injection is a sterile formulation of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor with sodium bicarbonate added as a buffer. PRIMAXIN is an antibacterial drug for intravenous administration. Imipenem (N-formimidoylthienamycin monohydrate) is a crystalline derivative of thienamycin, which is produced by Streptomyces cattleya. Its chemical name is (5R,6S)-3-[[2-(formimidoylamino)ethyl]thio]-6-[(R)-1-hydroxyethyl]-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monohydrate. It is an off-white, nonhygroscopic crystalline compound with a molecular weight of 317.37. It is sparingly soluble in water and slightly soluble in methanol. Its empirical formula is C12H17N3O4S∙H2O, and its structural formula is. Cilastatin sodium is the sodium salt of a derivatized heptenoic acid. Its chemical name is sodium (Z)-7[[(R)-2-amino-2-carboxyethyl]thio]-2-[(S)-2,2-dimethylcyclopropanecarboxamido]-2-heptenoate. It is an off-white to yellowish-white, hygroscopic, amorphous compound with a molecular weight of 380.43. It is very soluble in water and in methanol. Its empirical formula is C16H25N2O5SNa, and its structural formula is. Each single-dose vial of PRIMAXIN contains 500 mg imipenem (equivalent to 530 mg imipenem monohydrate), 500 mg cilastatin (equivalent to 531 mg cilastatin sodium), and 20 mg sodium bicarbonate (used as a buffer). PRIMAXIN is buffered to provide solutions in the pH range of 6.5 to 8.5. There is no significant change in pH when solutions are prepared and used as directed [see How Supplied/Storage and Handling (16.1)]. PRIMAXIN 500 contains 37.5 mg of sodium (1.6 mEq). Solutions of PRIMAXIN range from colorless to yellow. Variations of color within this range do not affect the potency of the product.</Description>
</NDC>
<NDC>
<NDCCode>0008-1123-12</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0008-1123-12) / 2 BLISTER PACK in 1 POUCH / 15 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00008-1123-12</NDC11Code>
<ProductNDC>0008-1123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duavee</ProprietaryName>
<NonProprietaryName>Conjugated Estrogens/bazedoxifene</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131003</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022247</ApplicationNumber>
<LabelerName>Wyeth Pharmaceuticals LLC, a subsidiary of Pfizer Inc.</LabelerName>
<SubstanceName>ESTROGENS, CONJUGATED; BAZEDOXIFENE ACETATE</SubstanceName>
<StrengthNumber>.45; 20</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Estrogen Agonist/Antagonist [EPC], Estrogen Receptor Agonists [MoA], Estrogen [EPC], Estrogens, Conjugated (USP) [CS], Selective Estrogen Receptor Modulators [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131003</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DUAVEE is indicated in women with a uterus for.</IndicationAndUsage>
<Description>DUAVEE (conjugated estrogens/bazedoxifene), contains conjugated estrogens with bazedoxifene, an estrogen agonist/antagonist. Conjugated estrogens are purified from pregnant mares' urine and consist of the sodium salts of water-soluble estrogen sulfates blended to represent the average composition of material derived from pregnant mares' urine. Conjugated estrogens are a mixture of sodium estrone sulfate and sodium equilin sulfate, and also contain as concomitant components, sodium sulfate conjugates, 17α-dihydroequilin, 17α-estradiol, and 17β-dihydroequilin. Bazedoxifene is supplied as the acetate salt (bazedoxifene acetate) and has the chemical name 1H-Indol-5-ol, 1-[[4-[2-(hexahydro-1H-azepin-1-yl) ethoxy]phenyl]methyl]-2-(4-hydroxyphenyl)-3-methyl-, monoacetate. The empirical formula is C30H34N2O3 ∙ C2H4O2, and the molecular weight is 530.65. Bazedoxifene acetate is a white to tan powder. The aqueous solubility of bazedoxifene is pH-dependent. Solubility is higher at lower pH. The solubility of bazedoxifene acetate in unbuffered sterile water was measured to be 923 microgramsA/mL at pH 5.4. The following represents the chemical structure of bazedoxifene acetate:. DUAVEE is available for oral administration as tablets containing 0.45 mg of conjugated estrogens with 20 mg of bazedoxifene (equivalent to 22.6 mg of bazedoxifene acetate). Each tablet of DUAVEE contains the following inactive ingredients: calcium phosphate tribasic, hydroxypropyl cellulose, microcrystalline cellulose, powdered cellulose, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, sucrose, ascorbic acid, sucrose palmitic acid ester, hydroxyethylcellulose, titanium dioxide, red iron oxide, yellow iron oxide, black iron oxide, povidone, polydextrose, maltitol, poloxamer 188, propylene glycol, and isopropyl alcohol.</Description>
</NDC>
<NDC>
<NDCCode>0069-0135-01</NDCCode>
<PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (0069-0135-01) </PackageDescription>
<NDC11Code>00069-0135-01</NDC11Code>
<ProductNDC>0069-0135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120904</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203341</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120904</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>0069-0136-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0069-0136-01) </PackageDescription>
<NDC11Code>00069-0136-01</NDC11Code>
<ProductNDC>0069-0136</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120904</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203341</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120904</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>0069-0193-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0069-0193-01) </PackageDescription>
<NDC11Code>00069-0193-01</NDC11Code>
<ProductNDC>0069-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171218</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203341</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>0069-0504-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (0069-0504-30) </PackageDescription>
<NDC11Code>00069-0504-30</NDC11Code>
<ProductNDC>0069-0504</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240102</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217729</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>0069-1014-15</NDCCode>
<PackageDescription>150 CAPSULE in 1 BOTTLE (0069-1014-15) </PackageDescription>
<NDC11Code>00069-1014-15</NDC11Code>
<ProductNDC>0069-1014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240102</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217729</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>0143-9295-01</NDCCode>
<PackageDescription>1 VIAL in 1 BOX (0143-9295-01) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>00143-9295-01</NDC11Code>
<ProductNDC>0143-9295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol Decanoate</ProprietaryName>
<NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19981001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075305</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19981001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol Decanoate Injection is indicated for the treatment of patients with schizophrenia who require prolonged parenteral antipsychotic therapy.</IndicationAndUsage>
<Description>Haloperidol decanoate is the decanoate ester of the butyrophenone, haloperidol. It has a markedly extended duration of effect. It is available in sesame oil in sterile form for intramuscular (IM) injection. The structural formula of haloperidol decanoate, 4-[4-(p-chlorophenyl)-4-hydroxypiperidino]-4’-fluorobutyrophenone decanoate, is. Molecular Formula: C31H41ClFNO3 M.W. 530.13. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL), but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection, 100 mg/mL, contains 141.04 mg haloperidol decanoate, equivalent to 100 mg haloperidol, in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>0143-9296-01</NDCCode>
<PackageDescription>1 VIAL in 1 BOX (0143-9296-01) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>00143-9296-01</NDC11Code>
<ProductNDC>0143-9296</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol Decanoate</ProprietaryName>
<NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19981001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075305</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19981001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol Decanoate Injection is indicated for the treatment of patients with schizophrenia who require prolonged parenteral antipsychotic therapy.</IndicationAndUsage>
<Description>Haloperidol decanoate is the decanoate ester of the butyrophenone, haloperidol. It has a markedly extended duration of effect. It is available in sesame oil in sterile form for intramuscular (IM) injection. The structural formula of haloperidol decanoate, 4-[4-(p-chlorophenyl)-4-hydroxypiperidino]-4’-fluorobutyrophenone decanoate, is. Molecular Formula: C31H41ClFNO3 M.W. 530.13. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL), but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection, 100 mg/mL, contains 141.04 mg haloperidol decanoate, equivalent to 100 mg haloperidol, in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>0395-0055-16</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE, PLASTIC (0395-0055-16)</PackageDescription>
<NDC11Code>00395-0055-16</NDC11Code>
<ProductNDC>0395-0055</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humco Aluminum Acetate (burrow)</ProprietaryName>
<NonProprietaryName>Aluminum Acetate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19980325</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Humco Holding Group, Inc.</LabelerName>
<SubstanceName>ALUMINUM ACETATE</SubstanceName>
<StrengthNumber>530</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-08-29</LastUpdate>
</NDC>
<NDC>
<NDCCode>0409-4164-03</NDCCode>
<PackageDescription>12 POUCH in 1 CASE (0409-4164-03) > 1 BAG in 1 POUCH > 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-4164-03</NDC11Code>
<ProductNDC>0409-4164</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn Ii</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Histidine, Proline, Serine, N-acetyl-tyrosine, And Glycine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019438</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; HISTIDINE; PROLINE; SERINE; N-ACETYLTYROSINE; GLYCINE</SubstanceName>
<StrengthNumber>660; 1000; 1050; 172; 298; 400; 200; 500; 993; 1018; 700; 738; 300; 722; 530; 270; 500</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC],Amino Acids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-04-18</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0409-4164-05</NDCCode>
<PackageDescription>6 POUCH in 1 CASE (0409-4164-05) > 1 BAG in 1 POUCH > 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-4164-05</NDC11Code>
<ProductNDC>0409-4164</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn Ii</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Histidine, Proline, Serine, N-acetyl-tyrosine, And Glycine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019438</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; HISTIDINE; PROLINE; SERINE; N-ACETYLTYROSINE; GLYCINE</SubstanceName>
<StrengthNumber>660; 1000; 1050; 172; 298; 400; 200; 500; 993; 1018; 700; 738; 300; 722; 530; 270; 500</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC],Amino Acids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-04-18</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
</NDCList>