{
"NDC": [
{
"NDCCode": "68462-569-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68462-569-90) ",
"NDC11Code": "68462-0569-90",
"ProductNDC": "68462-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine And Olmesartan Medoxomil",
"NonProprietaryName": "Amlodipine And Olmesartan Medoxomil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207807",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "AMLODIPINE BESYLATE; OLMESARTAN MEDOXOMIL",
"StrengthNumber": "10; 40",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170705",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine and olmesartan medoxomil tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with amlodipine and olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine and olmesartan medoxomil tablets may also be used as initial therapy in patients who are likely to need multiple antihypertensive agents to achieve their blood pressure goals. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, parallel-group factorial study [see Clinical Studies (14.1)] provide estimates of the probability of reaching a blood pressure goal with amlodipine and olmesartan medoxomil tablets compared to amlodipine or olmesartan medoxomil monotherapy. The figures below provide estimates of the likelihood of achieving the targeted systolic or diastolic blood pressure goals with amlodipine and olmesartan medoxomil tablets 10/40 mg compared with amlodipine or olmesartan medoxomil monotherapy, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling from all available data of that treatment group. The right tail of each curve is less reliable because of small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure (SBP) < 140 mmHg at Week 8 With LOCF. Figure 2: Probability of Achieving Diastolic Blood Pressure (DBP) < 90 mmHg at Week 8 With LOCF. Figure 3: Probability of Achieving Systolic Blood Pressure (SBP) < 130 mmHg at Week 8 With LOCF. Figure 4: Probability of Achieving Diastolic Blood Pressure (DBP) < 80 mmHg at Week 8 With LOCF. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 SBP <140 mmHg or <130 mmHg or a DBP <90 mmHg or <80 mmHg) for the high-dose treatment groups evaluated in the study. Amlodipine and olmesartan medoxomil tablets 5/20 mg, the lowest dose combination treatment group, increases the probability of reaching blood pressure goal compared with the highest dose monotherapies, amlodipine 10 mg and olmesartan medoxomil 40 mg. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 48% likelihood of achieving a goal of <140 mmHg (systolic) and a 51% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with olmesartan medoxomil 40 mg, and about a 46% likelihood of achieving a goal of <140 mmHg (systolic) and a 60% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with amlodipine 10 mg. The likelihood of achieving these same goals increases to 63% (systolic) and 71% (diastolic) on amlodipine and olmesartan medoxomil tablets 5/20 mg, and to 68% (systolic) and 85% (diastolic) on amlodipine and olmesartan medoxomil tablets 10/40 mg.",
"Description": "Amlodipine and Olmesartan Medoxomil Tablets, USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. Amlodipine and Olmesartan Medoxomil Tablets, USP contain amlodipine besylate, USP and olmesartan medoxomil, USP. Amlodipine besylate, USP is chemically described as 3-ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridine dicarboxylate, monobenzenesulphonate. It is a white to off-white crystalline powder that is freely soluble in methanol, sparingly soluble in alcohol and slightly soluble in water and 2-propanol. The molecular formula and weight of amlodipine besylate, USP are C20H25ClN2O5C6H6O3S and 567.05 g/mol. It has the following structural formula. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan medoxomil, USP is chemically described as 1H-imidazole-5-carboxylic acid, 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl] methyl]-(5-methyl-2-oxo-1,3-dioxol-4-yl) methyl ester. It is a white to off-white crystalline powder that is sparingly soluble in methanol, practically insoluble in water, slightly soluble in acetone, and very slightly soluble in ethanol. The molecular formula and weight of olmesartan medoxomil, USP are C29H30N6O6 and 558.59 g/mol. It has the following structural formula:. Each tablet of Amlodipine and Olmesartan Medoxomil Tablets, USP also contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized corn starch. The color coatings for all tablet strengths contain polyvinyl alcohol, polyethylene glycol 3350, talc, and titanium dioxide. The 5 mg/40 mg tablets also contain iron oxide yellow. The 10 mg/20 mg tablets and 10 mg/40 mg tablets also contain iron oxide red and iron oxide yellow."
},
{
"NDCCode": "68462-569-14",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68462-569-14) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "68462-0569-14",
"ProductNDC": "68462-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine And Olmesartan Medoxomil",
"NonProprietaryName": "Amlodipine And Olmesartan Medoxomil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207807",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "AMLODIPINE BESYLATE; OLMESARTAN MEDOXOMIL",
"StrengthNumber": "10; 40",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170705",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine and olmesartan medoxomil tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with amlodipine and olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine and olmesartan medoxomil tablets may also be used as initial therapy in patients who are likely to need multiple antihypertensive agents to achieve their blood pressure goals. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, parallel-group factorial study [see Clinical Studies (14.1)] provide estimates of the probability of reaching a blood pressure goal with amlodipine and olmesartan medoxomil tablets compared to amlodipine or olmesartan medoxomil monotherapy. The figures below provide estimates of the likelihood of achieving the targeted systolic or diastolic blood pressure goals with amlodipine and olmesartan medoxomil tablets 10/40 mg compared with amlodipine or olmesartan medoxomil monotherapy, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling from all available data of that treatment group. The right tail of each curve is less reliable because of small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure (SBP) < 140 mmHg at Week 8 With LOCF. Figure 2: Probability of Achieving Diastolic Blood Pressure (DBP) < 90 mmHg at Week 8 With LOCF. Figure 3: Probability of Achieving Systolic Blood Pressure (SBP) < 130 mmHg at Week 8 With LOCF. Figure 4: Probability of Achieving Diastolic Blood Pressure (DBP) < 80 mmHg at Week 8 With LOCF. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 SBP <140 mmHg or <130 mmHg or a DBP <90 mmHg or <80 mmHg) for the high-dose treatment groups evaluated in the study. Amlodipine and olmesartan medoxomil tablets 5/20 mg, the lowest dose combination treatment group, increases the probability of reaching blood pressure goal compared with the highest dose monotherapies, amlodipine 10 mg and olmesartan medoxomil 40 mg. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 48% likelihood of achieving a goal of <140 mmHg (systolic) and a 51% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with olmesartan medoxomil 40 mg, and about a 46% likelihood of achieving a goal of <140 mmHg (systolic) and a 60% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with amlodipine 10 mg. The likelihood of achieving these same goals increases to 63% (systolic) and 71% (diastolic) on amlodipine and olmesartan medoxomil tablets 5/20 mg, and to 68% (systolic) and 85% (diastolic) on amlodipine and olmesartan medoxomil tablets 10/40 mg.",
"Description": "Amlodipine and Olmesartan Medoxomil Tablets, USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. Amlodipine and Olmesartan Medoxomil Tablets, USP contain amlodipine besylate, USP and olmesartan medoxomil, USP. Amlodipine besylate, USP is chemically described as 3-ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridine dicarboxylate, monobenzenesulphonate. It is a white to off-white crystalline powder that is freely soluble in methanol, sparingly soluble in alcohol and slightly soluble in water and 2-propanol. The molecular formula and weight of amlodipine besylate, USP are C20H25ClN2O5C6H6O3S and 567.05 g/mol. It has the following structural formula. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan medoxomil, USP is chemically described as 1H-imidazole-5-carboxylic acid, 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl] methyl]-(5-methyl-2-oxo-1,3-dioxol-4-yl) methyl ester. It is a white to off-white crystalline powder that is sparingly soluble in methanol, practically insoluble in water, slightly soluble in acetone, and very slightly soluble in ethanol. The molecular formula and weight of olmesartan medoxomil, USP are C29H30N6O6 and 558.59 g/mol. It has the following structural formula:. Each tablet of Amlodipine and Olmesartan Medoxomil Tablets, USP also contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized corn starch. The color coatings for all tablet strengths contain polyvinyl alcohol, polyethylene glycol 3350, talc, and titanium dioxide. The 5 mg/40 mg tablets also contain iron oxide yellow. The 10 mg/20 mg tablets and 10 mg/40 mg tablets also contain iron oxide red and iron oxide yellow."
},
{
"NDCCode": "68462-569-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (68462-569-30) ",
"NDC11Code": "68462-0569-30",
"ProductNDC": "68462-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine And Olmesartan Medoxomil",
"NonProprietaryName": "Amlodipine And Olmesartan Medoxomil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207807",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "AMLODIPINE BESYLATE; OLMESARTAN MEDOXOMIL",
"StrengthNumber": "10; 40",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170705",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine and olmesartan medoxomil tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with amlodipine and olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine and olmesartan medoxomil tablets may also be used as initial therapy in patients who are likely to need multiple antihypertensive agents to achieve their blood pressure goals. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, parallel-group factorial study [see Clinical Studies (14.1)] provide estimates of the probability of reaching a blood pressure goal with amlodipine and olmesartan medoxomil tablets compared to amlodipine or olmesartan medoxomil monotherapy. The figures below provide estimates of the likelihood of achieving the targeted systolic or diastolic blood pressure goals with amlodipine and olmesartan medoxomil tablets 10/40 mg compared with amlodipine or olmesartan medoxomil monotherapy, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling from all available data of that treatment group. The right tail of each curve is less reliable because of small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure (SBP) < 140 mmHg at Week 8 With LOCF. Figure 2: Probability of Achieving Diastolic Blood Pressure (DBP) < 90 mmHg at Week 8 With LOCF. Figure 3: Probability of Achieving Systolic Blood Pressure (SBP) < 130 mmHg at Week 8 With LOCF. Figure 4: Probability of Achieving Diastolic Blood Pressure (DBP) < 80 mmHg at Week 8 With LOCF. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 SBP <140 mmHg or <130 mmHg or a DBP <90 mmHg or <80 mmHg) for the high-dose treatment groups evaluated in the study. Amlodipine and olmesartan medoxomil tablets 5/20 mg, the lowest dose combination treatment group, increases the probability of reaching blood pressure goal compared with the highest dose monotherapies, amlodipine 10 mg and olmesartan medoxomil 40 mg. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 48% likelihood of achieving a goal of <140 mmHg (systolic) and a 51% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with olmesartan medoxomil 40 mg, and about a 46% likelihood of achieving a goal of <140 mmHg (systolic) and a 60% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with amlodipine 10 mg. The likelihood of achieving these same goals increases to 63% (systolic) and 71% (diastolic) on amlodipine and olmesartan medoxomil tablets 5/20 mg, and to 68% (systolic) and 85% (diastolic) on amlodipine and olmesartan medoxomil tablets 10/40 mg.",
"Description": "Amlodipine and Olmesartan Medoxomil Tablets, USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. Amlodipine and Olmesartan Medoxomil Tablets, USP contain amlodipine besylate, USP and olmesartan medoxomil, USP. Amlodipine besylate, USP is chemically described as 3-ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridine dicarboxylate, monobenzenesulphonate. It is a white to off-white crystalline powder that is freely soluble in methanol, sparingly soluble in alcohol and slightly soluble in water and 2-propanol. The molecular formula and weight of amlodipine besylate, USP are C20H25ClN2O5C6H6O3S and 567.05 g/mol. It has the following structural formula. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan medoxomil, USP is chemically described as 1H-imidazole-5-carboxylic acid, 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl] methyl]-(5-methyl-2-oxo-1,3-dioxol-4-yl) methyl ester. It is a white to off-white crystalline powder that is sparingly soluble in methanol, practically insoluble in water, slightly soluble in acetone, and very slightly soluble in ethanol. The molecular formula and weight of olmesartan medoxomil, USP are C29H30N6O6 and 558.59 g/mol. It has the following structural formula:. Each tablet of Amlodipine and Olmesartan Medoxomil Tablets, USP also contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized corn starch. The color coatings for all tablet strengths contain polyvinyl alcohol, polyethylene glycol 3350, talc, and titanium dioxide. The 5 mg/40 mg tablets also contain iron oxide yellow. The 10 mg/20 mg tablets and 10 mg/40 mg tablets also contain iron oxide red and iron oxide yellow."
},
{
"NDCCode": "10544-569-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (10544-569-90)",
"NDC11Code": "10544-0569-90",
"ProductNDC": "10544-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemfibrozil",
"NonProprietaryName": "Gemfibrozil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20131217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074270",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "GEMFIBROZIL",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator-activated Receptor alpha Agonists [MoA],PPAR alpha [CS],Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Gemfibrozil (Gemfibrozil tablets, USP) is indicated as adjunctive therapy to diet for: 1 Treatment of adult patients with very high elevations of serum triglyceride levels (Types IV and V hyperlipidemia) who present a risk of pancreatitis and who do not respond adequately to a determined dietary effort to control them. Patients who present such risk typically have serum triglycerides over 2000 mg/dL and have elevations of VLDL-cholesterol as well as fasting chylomicrons (Type V hyperlipidemia). Subjects who consistently have total serum or plasma triglycerides below 1000 mg/dL are unlikely to present a risk of pancreatitis. Gemfibrozil therapy may be considered for those subjects with triglyceride elevations between 1000 and 2000 mg/dL who have a history of pancreatitis or of recurrent abdominal pain typical of pancreatitis. It is recognized that some Type IV patients with triglycerides under 1000 mg/dL may, through dietary or alcoholic indiscretion, convert to a Type V pattern with massive triglyceride elevations accompanying fasting chylomicronemia, but the influence of Gemfibrozil therapy on the risk of pancreatitis in such situations has not been adequately studied. Drug therapy is not indicated for patients with Type I hyperlipoproteinemia, who have elevations of chylomicrons and plasma triglycerides, but who have normal levels of very low density lipoprotein (VLDL). Inspection of plasma refrigerated for 14 hours is helpful in distinguishing Types I, IV, and V hyperlipoproteinemia., 2 Reducing the risk of developing coronary heart disease only in Type IIb patients without history of or symptoms of existing coronary heart disease who have had an inadequate response to weight loss, dietary therapy, exercise, and other pharmacologic agents (such as bile acid sequestrants and nicotinic acid, known to reduce LDL- and raise HDL-cholesterol) and who have the following triad of lipid abnormalities: low HDL-cholesterol levels in addition to elevated LDL-cholesterol and elevated triglycerides (see WARNINGS, PRECAUTIONS, and CLINICAL PHARMACOLOGY). The National Cholesterol Education Program has defined a serum HDL-cholesterol value that is consistently below 35 mg/dL as constituting an independent risk factor for coronary heart disease. Patients with significantly elevated triglycerides should be closely observed when treated with Gemfibrozil. In some patients with high triglyceride levels, treatment with Gemfibrozil is associated with a significant increase in LDL-cholesterol. BECAUSE OF POTENTIAL TOXICITY SUCH AS MALIGNANCY, GALLBLADDER DISEASE, ABDOMINAL PAIN LEADING TO APPENDECTOMY AND OTHER ABDOMINAL SURGERIES, AN INCREASED INCIDENCE IN NON-CORONARY MORTALITY, AND THE 44% RELATIVE INCREASE DURING THE TRIAL PERIOD IN AGE-ADJUSTED ALL-CAUSE MORTALITY SEEN WITH THE CHEMICALLY AND PHARMACOLOGICALLY RELATED DRUG, CLOFIBRATE, THE POTENTIAL BENEFIT OF GEMFIBROZIL IN TREATING TYPE IIA PATIENTS WITH ELEVATIONS OF LDL-CHOLESTEROL ONLY IS NOT LIKELY TO OUTWEIGH THE RISKS. GEMFIBROZIL IS ALSO NOT INDICATED FOR THE TREATMENT OF PATIENTS WITH LOW HDL- CHOLESTEROL AS THEIR ONLY LIPID ABNORMALITY. .",
"Description": "Gemfibrozil is a lipid regulating agent. It is available as tablets for oral administration. Each tablet contains 600 mg Gemfibrozil. Each tablet also contains calcium stearate, microcrystalline cellulose, hydroxypropyl cellulose, Opadry white, polysorbate 80, sodium starch glycolate, colloidal silicon dioxide, and pregelatinized starch. The chemical name is 5-(2,5-dimethylphenoxy)-2,2-dimethylpentanoic acid, with the following structural formula. The empirical formula is C 15H 22O 3 and the molecular weight is 250.35; the solubility in water and acid is 0.0019% and in dilute base it is greater than 1%. The melting point is 58°-61° C. Gemfibrozil is a white solid which is stable under ordinary conditions."
},
{
"NDCCode": "21695-569-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (21695-569-90)",
"NDC11Code": "21695-0569-90",
"ProductNDC": "21695-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorzoxazone",
"NonProprietaryName": "Chlorzoxazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089895",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "CHLORZOXAZONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.",
"Description": "Chlorzoxazone USP is a centrally acting skeletal muscle relaxant, available as tablets of 500 mg for oral administration. Its chemical name is 5-Chloro-2-benzoxazolinone, and its structural formula is. C7H4CINO2 MW 169.57. Chlorzoxazone USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Chlorzoxazone tablets contain the inactive ingredients Docusate Sodium, Lactose (hydrous), Magnesium Stearate, Microcrystalline Cellulose, Pregelatinized Starch, Sodium Benzoate, and Sodium Starch Glycolate."
},
{
"NDCCode": "42291-569-90",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (42291-569-90) ",
"NDC11Code": "42291-0569-90",
"ProductNDC": "42291-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Hydrochloride",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180724",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207515",
"LabelerName": "AvKARE",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "27",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180724",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate hydrochloride (HCl) extended-release tablets are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in children 6 years of age and older, adolescents and adults up to the age of 65 [see Clinical Studies (14)] . A diagnosis of Attention Deficit Hyperactivity Disorder (ADHD; DSM-IV) implies the presence of hyperactive-impulsive or inattentive symptoms that caused impairment and were present before age 7 years. The symptoms must cause clinically significant impairment, e.g., in social, academic, or occupational functioning, and be present in two or more settings, e.g., school (or work) and at home. The symptoms must not be better accounted for by another mental disorder. For the Inattentive Type, at least six of the following symptoms must have persisted for at least 6 months: lack of attention to details/careless mistakes; lack of sustained attention; poor listener; failure to follow through on tasks; poor organization; avoids tasks requiring sustained mental effort; loses things; easily distracted; forgetful. For the Hyperactive-Impulsive Type, at least six of the following symptoms must have persisted for at least 6 months: fidgeting/squirming; leaving seat; inappropriate running/climbing; difficulty with quiet activities; “on the go;” excessive talking; blurting answers; can’t wait turn; intrusive. The Combined Type requires both inattentive and hyperactive-impulsive criteria to be met.",
"Description": "Methylphenidate HCl extended-release tablets, USP are a central nervous system (CNS) stimulant. Methylphenidate HCl extended-release tablets, USP are available in four tablet strengths. Each extended-release tablet for once-a-day oral administration contains 18, 27, 36, or 54 mg of methylphenidate HCl, USP and is designed to have a 12-hour duration of effect. Chemically, methylphenidate HCl, USP is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C 14H 19NO 2HCl. Its structural formula is:. Methylphenidate HCl, USP is a white, odorless crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Methylphenidate HCl extended-release tablets, USP also contains the following inert ingredients: colloidal silicon dioxide, ethylcellulose, fumaric acid, hypromellose, mannitol, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, sodium chloride, stearic acid, talc, titanium dioxide and triethyl citrate. The 18 mg extended-release tablet also contains iron oxide black and iron oxide yellow. The 27 mg extended-release tablet also contains iron oxide black and iron oxide yellow. The 54 mg extended-release tablet also contains iron oxide red. USP dissolution test is pending."
},
{
"NDCCode": "42549-569-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (42549-569-90)",
"NDC11Code": "42549-0569-90",
"ProductNDC": "42549-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride And Acetaminophen",
"NonProprietaryName": "Tramadol Hydrochloride And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20051216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077184",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "37.5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Tramadol hydrochloride and acetaminophen tablet is indicated for the short-term (five days or less) management of acute pain.",
"Description": "Tramadol hydrochloride and acetaminophen tablet for oral administration (37.5 mg tramadol hydrochloride/325 mg acetaminophen tablets) combines two analgesics, tramadol and acetaminophen. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino) methyl]-1-(3-methoxyphenyl) cyclo-hexanol hydrochloride. Its structural formula is. The molecular formula of tramadol hydrochloride is C16H13NO2.HC1. The molecular weight of tramadol hydrochloride is 299.84. Tramadol hydrochloride is a white, bitter, crystalline and odorless powder. The chemical name for acetaminophen is N-acetyl-p-aminophenol. Its structural formula is. The molecular formula of acetaminophen is C8H9NO2. The molecular weight of acetaminophen is 151.17. Acetaminophen is an analgesic and antipyretic agent which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Tramadol hydrochloride and acetaminophen tablets contain 37.5 mg tramadol hydrochloride and 325 mg acetaminophen and are light yellow in color. Inactive ingredients in the tablet are microcrystalline cellulose, pregelatinized starch, sodium starch glycolate, corn starch, magnesium stearate, opadry yellow and povidone. In addition, opadry yellow contains: hydroxypropyl methyl cellulose, titanium dioxide, macrogol, talc, and iron oxide yellow."
},
{
"NDCCode": "45963-569-08",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (45963-569-08)",
"NDC11Code": "45963-0569-08",
"ProductNDC": "45963-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090797",
"LabelerName": "Actavis Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "49349-569-19",
"PackageDescription": "90 TABLET in 1 CANISTER (49349-569-19)",
"NDC11Code": "49349-0569-19",
"ProductNDC": "49349-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diovan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130911",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021283",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "160",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "63187-569-90",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (63187-569-90) ",
"NDC11Code": "63187-0569-90",
"ProductNDC": "63187-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20031201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021210",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": ".15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20151001",
"SamplePackage": "N",
"IndicationAndUsage": "Levothyroxine sodium is used for the following indications. Hypothyroidism - As replacement or supplemental therapy in congenital or acquired hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. Specific indications include: primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) hypothyroidism and subclinical hypothyroidism. Primary hypothyroidism may result from functional deficiency, primary atrophy, partial or total congenital absence of the thyroid gland, or from the effects of surgery, radiation, or drugs, with or without the presence of goiter. Pituitary TSH Suppression - In the treatment or prevention of various types of euthyroid goiters (see WARNINGS and PRECAUTIONS), including thyroid nodules (see WARNINGS and PRECAUTIONS), subacute or chronic Iymphocytic thyroiditis (Hashimoto's thyroiditis), multinodular goiter (see WARNINGS and PRECAUTIONS), and, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer.",
"Description": "Levothyroxine Sodium Tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown."
},
{
"NDCCode": "63323-569-90",
"PackageDescription": "10 SYRINGE in 1 CARTON (63323-569-90) > .8 mL in 1 SYRINGE",
"NDC11Code": "63323-0569-90",
"ProductNDC": "63323-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150220",
"EndMarketingDate": "20201031",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020164",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS],Low Molecular Weight Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150220",
"EndMarketingDatePackage": "20200930",
"SamplePackage": "N"
},
{
"NDCCode": "67544-569-60",
"PackageDescription": "90 TABLET in 1 BOTTLE (67544-569-60) ",
"NDC11Code": "67544-0569-60",
"ProductNDC": "67544-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxybutynin Chloride",
"NonProprietaryName": "Oxybutynin Chloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071655",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "OXYBUTYNIN CHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"IndicationAndUsage": "Oxybutynin Chloride Tablets USP are indicated for the relief of symptoms of bladder instability associated with voiding in patients with uninhibited neurogenic or reflex neurogenic bladder (i.e., urgency, frequency, urinary leakage, urge incontinence, dysuria).",
"Description": "Oxybutynin Chloride Tablets USP are very pale blue, round, biconvex, scored, debossed tablets containing 5 mg of oxybutynin chloride, USP. Chemically, oxybutynin chloride, USP is d,l (racemic) 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The structural formula appears below. C22H31NO3HCl M.W. 393.9. Oxybutynin chloride, USP is a white crystalline solid. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin Chloride Tablets USP also contain calcium stearate, microcrystalline cellulose, anhydrous lactose, sodium starch glycolate and FD&C Blue #1 Aluminum Lake. Oxybutynin Chloride Tablets USP are for oral administration. Meets USP Dissolution Test 2. Therapeutic Category: Antispasmodic, anticholinergic."
},
{
"NDCCode": "68382-569-16",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (68382-569-16) ",
"NDC11Code": "68382-0569-16",
"ProductNDC": "68382-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acamprosate Calcium",
"NonProprietaryName": "Acamprosate Calcium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205995",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "ACAMPROSATE CALCIUM",
"StrengthNumber": "333",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2023-11-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170601",
"SamplePackage": "N",
"IndicationAndUsage": "Acamprosate calcium delayed-release tablets are indicated for the maintenance of abstinence from alcohol in patients with alcohol dependence who are abstinent at treatment initiation (1, 14). Treatment with acamprosate calcium delayed-release tablets should be part of a comprehensive management program that includes psychosocial support (1).",
"Description": "Acamprosate calcium, USP is supplied in an enteric-coated tablet for oral administration. Acamprosate calcium, USP is a synthetic compound with a chemical structure similar to that of the endogenous amino acid homotaurine, which is a structural analogue of the amino acid neurotransmitter γ-aminobutyric acid and the amino acid neuromodulator taurine. Its chemical name is calcium acetylaminopropane sulfonate. Its chemical formula is C10H20N2O8S2Ca and molecular weight is 400.5. Its structural formula is. Acamprosate calcium, USP is a white or almost white powder. It is freely soluble in water, practically insoluble in alcohol and in methylene chloride. Each acamprosate calcium delayed-release tablet intended for oral administration contains 333 mg of acamprosate calcium, USP equivalent to 300 mg of acamprosate. In addition, each tablet contains the following inactive ingredients: colloidal anhydrous silica, methacrylic acid copolymer type c, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium bicarbonate, sodium lauryl sulfate, sodium starch glycolate and talc. Sulfites were used in the synthesis of the drug substance and traces of residual sulfites may be present in the drug product."
},
{
"NDCCode": "71205-569-90",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (71205-569-90) ",
"NDC11Code": "71205-0569-90",
"ProductNDC": "71205-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140819",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200503",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2022-07-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210526",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations [see Warnings and Precautions (5.1)] , reserve tramadol hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Tramadol hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Tramadol hydrochloride is an opioid agonist in an extended-release tablet formulation for oral use. The chemical name is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. The molecular weight of tramadol HCl is 299.84. It is a white, bitter, crystalline and odorless powder that is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride extended-release tablets USP contain 100, 200 or 300 mg of tramadol HCl in an extended-release formulation. The tablets are white to off-white in color and contain the inactive ingredients: colloidal silicon dioxide, dibutyl sebacate, ethyl cellulose, microcrystalline cellulose, povidone, and sodium stearyl fumarate. The imprinting ink contains shellac, iron oxide black and propylene glycol. Tramadol hydrochloride extended-release tablets USP meet USP Dissolution Test 3."
},
{
"NDCCode": "71288-569-90",
"PackageDescription": "1 KIT in 1 CARTON (71288-569-90) * 1 VIAL, MULTI-DOSE in 1 CARTON (71288-565-03) / 2.8 mL in 1 VIAL, MULTI-DOSE * .5 mL in 1 PACKET (71288-350-91) ",
"NDC11Code": "71288-0569-90",
"ProductNDC": "71288-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leuprolide Acetate",
"NonProprietaryName": "Leuprolide Acetate",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075471",
"LabelerName": "Meitheal Pharmaceuticals Inc",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240515",
"SamplePackage": "N",
"IndicationAndUsage": "Leuprolide acetate injection is indicated in the palliative treatment of advanced prostatic cancer.",
"Description": "Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH or LH-RH). The analog possesses greater potency than the natural hormone. The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. Leuprolide Acetate Injection is a sterile, aqueous solution intended for subcutaneous injection. It is available in a 2.8 mL multiple-dose vial containing 5 mg per mL of leuprolide acetate, 6.3 mg per mL sodium chloride for tonicity adjustment, 9 mg per mL of benzyl alcohol as a preservative and water for injection. The pH may have been adjusted with sodium hydroxide and/or acetic acid."
},
{
"NDCCode": "76282-569-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (76282-569-90) ",
"NDC11Code": "76282-0569-90",
"ProductNDC": "76282-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211384",
"LabelerName": "Exelan Pharmaceuticals Inc.",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-06-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for: 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, USP along with pregelatinized starch, corn starch and talc as inactive ingredients. Capsule shells for 25 mg, 50 mg & 150 mg contains: gelatin & titanium dioxide. Capsule shells for 75 mg, 100 mg, 200 mg, 225 mg & 300 mg contains: gelatin, FD&C Blue No.1, FD&C Red No.40, FD&C Yellow No.6 and titanium dioxide. Imprinting ink contains: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water."
},
{
"NDCCode": "76420-569-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76420-569-90) ",
"NDC11Code": "76420-0569-90",
"ProductNDC": "76420-569",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Np Thyroid 90",
"NonProprietaryName": "Levothyroxine, Liothyronine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110203",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "LEVOTHYROXINE; LIOTHYRONINE",
"StrengthNumber": "57; 13.5",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Thyroxine [CS], Triiodothyronine [CS], l-Thyroxine [EPC], l-Triiodothyronine [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230516",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE: NP Thyroid® tablets (thyroid tablets, USP) are indicated: 1. As replacement or supplemental therapy in patients with hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. This category includes cretinism, myxedema, and ordinary hypothyroidism in patients of any age (children, adults, the elderly), or state (including pregnancy); primary hypothyroidism resulting from functional deficiency, primary atrophy, partial or total absence of thyroid gland, or the effects of surgery, radiation, or drugs, with or without the presence of goiter; and secondary (pituitary), or tertiary (hypothalamic) hypothyroidism (See WARNINGS). 2. As pituitary TSH suppressants, in the treatment or prevention of various types of euthyroid goiters, including thyroid nodules, subacute or chronic lymphocytic thyroiditis (Hashimoto’s), multinodular goiter, and in the management of thyroid cancer.",
"Description": "NP Thyroid® (thyroid tablets, USP) for oral use is a natural preparation derived from porcine thyroid glands. They contain both tetraiodothyronine sodium (T4 levothyroxine) and triiodothyronine sodium (T3 liothyronine) providing 38 mcg levothyroxine (T4) and 9 mcg liothyronine (T3) per grain of thyroid. The inactive ingredients are calcium stearate, dextrose (agglomerated) and mineral oil. Contains no ingredient made from a gluten-containing grain (wheat, barley, rye)."
},
{
"NDCCode": "68462-120-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (68462-120-90) ",
"NDC11Code": "68462-0120-90",
"ProductNDC": "68462-120",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nicardipine Hydrochloride",
"NonProprietaryName": "Nicardipine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216357",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "NICARDIPINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221216",
"SamplePackage": "N",
"IndicationAndUsage": "I. Stable Angina. Nicardipine hydrochloride capsules are indicated for the management of patients with chronic stable angina (effort-associated angina). Nicardipine hydrochloride capsules may be used alone or in combination with beta-blockers. II. Hypertension. Nicardipine hydrochloride capsules are indicated for the treatment of hypertension. Nicardipine hydrochloride capsules may be used alone or in combination with other antihypertensive drugs. In administering nicardipine it is important to be aware of the relatively large peak to trough differences in blood pressure effect (see DOSAGE AND ADMINISTRATION).",
"Description": "Nicardipine Hydrochloride Capsules for oral administration each contain 20 mg or 30 mg of nicardipine hydrochloride, USP. Nicardipine Hydrochloride Capsules are a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride, USP is a dihydropyridine structure with the IUPAC (International Union of Pure and Applied Chemistry) chemical name 2-(benzyl-methyl amino)ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m‑nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride, and it has the following structure. Nicardipine Hydrochloride, USP. Molecular Formula C26H29N3O6. HCl. Nicardipine hydrochloride, USP is a pale greenish-yellow, odorless, crystalline powder that melts at about 167°C to 171°C. It is freely soluble in methanol and acetic acid, sparingly soluble in ethanol, slightly soluble in water. It has a molecular weight of 515.99. Each Nicardipine Hydrochloride Capsules, for oral administration, contains 20 mg or 30 mg nicardipine hydrochloride, USP. In addition, each capsule contains the following inactive ingredients: magnesium stearate, pregelatinized starch, titanium dioxide, gelatin and FD&C blue #1. The black printing ink contains black iron oxide, potassium hydroxide and shellac."
},
{
"NDCCode": "68462-121-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (68462-121-90) ",
"NDC11Code": "68462-0121-90",
"ProductNDC": "68462-121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nicardipine Hydrochloride",
"NonProprietaryName": "Nicardipine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216357",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "NICARDIPINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221216",
"SamplePackage": "N",
"IndicationAndUsage": "I. Stable Angina. Nicardipine hydrochloride capsules are indicated for the management of patients with chronic stable angina (effort-associated angina). Nicardipine hydrochloride capsules may be used alone or in combination with beta-blockers. II. Hypertension. Nicardipine hydrochloride capsules are indicated for the treatment of hypertension. Nicardipine hydrochloride capsules may be used alone or in combination with other antihypertensive drugs. In administering nicardipine it is important to be aware of the relatively large peak to trough differences in blood pressure effect (see DOSAGE AND ADMINISTRATION).",
"Description": "Nicardipine Hydrochloride Capsules for oral administration each contain 20 mg or 30 mg of nicardipine hydrochloride, USP. Nicardipine Hydrochloride Capsules are a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride, USP is a dihydropyridine structure with the IUPAC (International Union of Pure and Applied Chemistry) chemical name 2-(benzyl-methyl amino)ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m‑nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride, and it has the following structure. Nicardipine Hydrochloride, USP. Molecular Formula C26H29N3O6. HCl. Nicardipine hydrochloride, USP is a pale greenish-yellow, odorless, crystalline powder that melts at about 167°C to 171°C. It is freely soluble in methanol and acetic acid, sparingly soluble in ethanol, slightly soluble in water. It has a molecular weight of 515.99. Each Nicardipine Hydrochloride Capsules, for oral administration, contains 20 mg or 30 mg nicardipine hydrochloride, USP. In addition, each capsule contains the following inactive ingredients: magnesium stearate, pregelatinized starch, titanium dioxide, gelatin and FD&C blue #1. The black printing ink contains black iron oxide, potassium hydroxide and shellac."
},
{
"NDCCode": "68462-159-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (68462-159-90) ",
"NDC11Code": "68462-0159-90",
"ProductNDC": "68462-159",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078170",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC],Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20080523",
"SamplePackage": "N"
},
{
"NDCCode": "68462-160-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (68462-160-90) ",
"NDC11Code": "68462-0160-90",
"ProductNDC": "68462-160",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078170",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "850",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC],Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20080523",
"SamplePackage": "N"
},
{
"NDCCode": "68462-161-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (68462-161-90) ",
"NDC11Code": "68462-0161-90",
"ProductNDC": "68462-161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078170",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC],Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20080523",
"SamplePackage": "N"
},
{
"NDCCode": "68462-195-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (68462-195-90) ",
"NDC11Code": "68462-0195-90",
"ProductNDC": "68462-195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070511",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077987",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070511",
"SamplePackage": "N",
"IndicationAndUsage": "Pravastatin sodium tablets are indicated:1.To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD).2.To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD.3.As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia.4.As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH).5.As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemia.Hypertriglyceridemia.",
"Description": "Pravastatin Sodium Tablets, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium stearate, mannitol, meglumine, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake."
},
{
"NDCCode": "68462-196-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (68462-196-90) ",
"NDC11Code": "68462-0196-90",
"ProductNDC": "68462-196",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070511",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077987",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070511",
"SamplePackage": "N",
"IndicationAndUsage": "Pravastatin sodium tablets are indicated:1.To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD).2.To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD.3.As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia.4.As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH).5.As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemia.Hypertriglyceridemia.",
"Description": "Pravastatin Sodium Tablets, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium stearate, mannitol, meglumine, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake."
},
{
"NDCCode": "68462-197-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (68462-197-90) ",
"NDC11Code": "68462-0197-90",
"ProductNDC": "68462-197",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070511",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077987",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070511",
"SamplePackage": "N",
"IndicationAndUsage": "Pravastatin sodium tablets are indicated:1.To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD).2.To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD.3.As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia.4.As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH).5.As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemia.Hypertriglyceridemia.",
"Description": "Pravastatin Sodium Tablets, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium stearate, mannitol, meglumine, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake."
},
{
"NDCCode": "68462-198-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (68462-198-90) ",
"NDC11Code": "68462-0198-90",
"ProductNDC": "68462-198",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077987",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20071228",
"SamplePackage": "N",
"IndicationAndUsage": "Pravastatin sodium tablets are indicated:1.To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD).2.To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD.3.As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia.4.As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH).5.As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemia.Hypertriglyceridemia.",
"Description": "Pravastatin Sodium Tablets, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium stearate, mannitol, meglumine, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake."
},
{
"NDCCode": "68462-199-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (68462-199-90) ",
"NDC11Code": "68462-0199-90",
"ProductNDC": "68462-199",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140707",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090032",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240307",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2) .",
"Description": "Telmisartan Tablets, USP are a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.6 and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "68462-200-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (68462-200-90) ",
"NDC11Code": "68462-0200-90",
"ProductNDC": "68462-200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140707",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090032",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240307",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2) .",
"Description": "Telmisartan Tablets, USP are a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.6 and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "68462-201-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (68462-201-90) ",
"NDC11Code": "68462-0201-90",
"ProductNDC": "68462-201",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140707",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090032",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240307",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2) .",
"Description": "Telmisartan Tablets, USP are a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.6 and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "68462-208-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68462-208-90) ",
"NDC11Code": "68462-0208-90",
"ProductNDC": "68462-208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Moexipril Hydrochloride",
"NonProprietaryName": "Moexipril Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090416",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "MOEXIPRIL HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101231",
"SamplePackage": "N",
"IndicationAndUsage": "Moexipril hydrochloride tablets are indicated for treatment of patients with hypertension. They may be used alone or in combination with thiazide diuretics. In using moexipril hydrochloride tablets, consideration should be given to the fact that another ACE inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen-vascular disease. Available data are insufficient to show that moexipril hydrochloride tablets do not have a similar risk (see WARNINGS). In considering use of moexipril hydrochloride tablets, it should be noted that in controlled trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, ACE inhibitors (for which adequate data are available) cause a higher rate of angioedema in black than in non-black patients (see WARNINGS, Angioedema).",
"Description": "Moexipril hydrochloride USP, the hydrochloride salt of moexipril, has the empirical formula C27H34N2O7HCl and a molecular weight of 535.04. It is chemically described as [3S-[2[R*(R*)],3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]- 1,2,3,4-tetrahydro-6,7-dimethoxy-3-iso-quinolinecarboxylic acid, monohydrochloride. It is a non-sulfhydryl containing precursor of the active angiotensin-converting enzyme (ACE) inhibitor moexiprilat and its structural formula is:. Moexipril hydrochloride USP is a fine white to off-white powder. It is soluble (about 10% weight-to-volume) in distilled water at room temperature. Moexipril hydrochloride tablets USP are supplied as scored, coated tablets containing 7.5 mg and 15 mg of moexipril hydrochloride USP for oral administration. In addition to the active ingredient, moexipril hydrochloride USP, the tablet core contains the following inactive ingredients: crospovidone, lactose monohydrate, magnesium oxide, magnesium stearate and povidone. The film coating contains: hypromellose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 6000, magnesium stearate, ferric oxide red, ferric oxide black and ferric oxide yellow (15 mg tablet only)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68462-569-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68462-569-90) </PackageDescription>
<NDC11Code>68462-0569-90</NDC11Code>
<ProductNDC>68462-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine And Olmesartan Medoxomil</ProprietaryName>
<NonProprietaryName>Amlodipine And Olmesartan Medoxomil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207807</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; OLMESARTAN MEDOXOMIL</SubstanceName>
<StrengthNumber>10; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine and olmesartan medoxomil tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with amlodipine and olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine and olmesartan medoxomil tablets may also be used as initial therapy in patients who are likely to need multiple antihypertensive agents to achieve their blood pressure goals. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, parallel-group factorial study [see Clinical Studies (14.1)] provide estimates of the probability of reaching a blood pressure goal with amlodipine and olmesartan medoxomil tablets compared to amlodipine or olmesartan medoxomil monotherapy. The figures below provide estimates of the likelihood of achieving the targeted systolic or diastolic blood pressure goals with amlodipine and olmesartan medoxomil tablets 10/40 mg compared with amlodipine or olmesartan medoxomil monotherapy, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling from all available data of that treatment group. The right tail of each curve is less reliable because of small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure (SBP) < 140 mmHg at Week 8 With LOCF. Figure 2: Probability of Achieving Diastolic Blood Pressure (DBP) < 90 mmHg at Week 8 With LOCF. Figure 3: Probability of Achieving Systolic Blood Pressure (SBP) < 130 mmHg at Week 8 With LOCF. Figure 4: Probability of Achieving Diastolic Blood Pressure (DBP) < 80 mmHg at Week 8 With LOCF. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 SBP <140 mmHg or <130 mmHg or a DBP <90 mmHg or <80 mmHg) for the high-dose treatment groups evaluated in the study. Amlodipine and olmesartan medoxomil tablets 5/20 mg, the lowest dose combination treatment group, increases the probability of reaching blood pressure goal compared with the highest dose monotherapies, amlodipine 10 mg and olmesartan medoxomil 40 mg. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 48% likelihood of achieving a goal of <140 mmHg (systolic) and a 51% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with olmesartan medoxomil 40 mg, and about a 46% likelihood of achieving a goal of <140 mmHg (systolic) and a 60% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with amlodipine 10 mg. The likelihood of achieving these same goals increases to 63% (systolic) and 71% (diastolic) on amlodipine and olmesartan medoxomil tablets 5/20 mg, and to 68% (systolic) and 85% (diastolic) on amlodipine and olmesartan medoxomil tablets 10/40 mg.</IndicationAndUsage>
<Description>Amlodipine and Olmesartan Medoxomil Tablets, USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. Amlodipine and Olmesartan Medoxomil Tablets, USP contain amlodipine besylate, USP and olmesartan medoxomil, USP. Amlodipine besylate, USP is chemically described as 3-ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridine dicarboxylate, monobenzenesulphonate. It is a white to off-white crystalline powder that is freely soluble in methanol, sparingly soluble in alcohol and slightly soluble in water and 2-propanol. The molecular formula and weight of amlodipine besylate, USP are C20H25ClN2O5C6H6O3S and 567.05 g/mol. It has the following structural formula. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan medoxomil, USP is chemically described as 1H-imidazole-5-carboxylic acid, 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl] methyl]-(5-methyl-2-oxo-1,3-dioxol-4-yl) methyl ester. It is a white to off-white crystalline powder that is sparingly soluble in methanol, practically insoluble in water, slightly soluble in acetone, and very slightly soluble in ethanol. The molecular formula and weight of olmesartan medoxomil, USP are C29H30N6O6 and 558.59 g/mol. It has the following structural formula:. Each tablet of Amlodipine and Olmesartan Medoxomil Tablets, USP also contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized corn starch. The color coatings for all tablet strengths contain polyvinyl alcohol, polyethylene glycol 3350, talc, and titanium dioxide. The 5 mg/40 mg tablets also contain iron oxide yellow. The 10 mg/20 mg tablets and 10 mg/40 mg tablets also contain iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>68462-569-14</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68462-569-14) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0569-14</NDC11Code>
<ProductNDC>68462-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine And Olmesartan Medoxomil</ProprietaryName>
<NonProprietaryName>Amlodipine And Olmesartan Medoxomil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207807</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; OLMESARTAN MEDOXOMIL</SubstanceName>
<StrengthNumber>10; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine and olmesartan medoxomil tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with amlodipine and olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine and olmesartan medoxomil tablets may also be used as initial therapy in patients who are likely to need multiple antihypertensive agents to achieve their blood pressure goals. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, parallel-group factorial study [see Clinical Studies (14.1)] provide estimates of the probability of reaching a blood pressure goal with amlodipine and olmesartan medoxomil tablets compared to amlodipine or olmesartan medoxomil monotherapy. The figures below provide estimates of the likelihood of achieving the targeted systolic or diastolic blood pressure goals with amlodipine and olmesartan medoxomil tablets 10/40 mg compared with amlodipine or olmesartan medoxomil monotherapy, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling from all available data of that treatment group. The right tail of each curve is less reliable because of small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure (SBP) < 140 mmHg at Week 8 With LOCF. Figure 2: Probability of Achieving Diastolic Blood Pressure (DBP) < 90 mmHg at Week 8 With LOCF. Figure 3: Probability of Achieving Systolic Blood Pressure (SBP) < 130 mmHg at Week 8 With LOCF. Figure 4: Probability of Achieving Diastolic Blood Pressure (DBP) < 80 mmHg at Week 8 With LOCF. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 SBP <140 mmHg or <130 mmHg or a DBP <90 mmHg or <80 mmHg) for the high-dose treatment groups evaluated in the study. Amlodipine and olmesartan medoxomil tablets 5/20 mg, the lowest dose combination treatment group, increases the probability of reaching blood pressure goal compared with the highest dose monotherapies, amlodipine 10 mg and olmesartan medoxomil 40 mg. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 48% likelihood of achieving a goal of <140 mmHg (systolic) and a 51% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with olmesartan medoxomil 40 mg, and about a 46% likelihood of achieving a goal of <140 mmHg (systolic) and a 60% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with amlodipine 10 mg. The likelihood of achieving these same goals increases to 63% (systolic) and 71% (diastolic) on amlodipine and olmesartan medoxomil tablets 5/20 mg, and to 68% (systolic) and 85% (diastolic) on amlodipine and olmesartan medoxomil tablets 10/40 mg.</IndicationAndUsage>
<Description>Amlodipine and Olmesartan Medoxomil Tablets, USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. Amlodipine and Olmesartan Medoxomil Tablets, USP contain amlodipine besylate, USP and olmesartan medoxomil, USP. Amlodipine besylate, USP is chemically described as 3-ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridine dicarboxylate, monobenzenesulphonate. It is a white to off-white crystalline powder that is freely soluble in methanol, sparingly soluble in alcohol and slightly soluble in water and 2-propanol. The molecular formula and weight of amlodipine besylate, USP are C20H25ClN2O5C6H6O3S and 567.05 g/mol. It has the following structural formula. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan medoxomil, USP is chemically described as 1H-imidazole-5-carboxylic acid, 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl] methyl]-(5-methyl-2-oxo-1,3-dioxol-4-yl) methyl ester. It is a white to off-white crystalline powder that is sparingly soluble in methanol, practically insoluble in water, slightly soluble in acetone, and very slightly soluble in ethanol. The molecular formula and weight of olmesartan medoxomil, USP are C29H30N6O6 and 558.59 g/mol. It has the following structural formula:. Each tablet of Amlodipine and Olmesartan Medoxomil Tablets, USP also contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized corn starch. The color coatings for all tablet strengths contain polyvinyl alcohol, polyethylene glycol 3350, talc, and titanium dioxide. The 5 mg/40 mg tablets also contain iron oxide yellow. The 10 mg/20 mg tablets and 10 mg/40 mg tablets also contain iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>68462-569-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (68462-569-30) </PackageDescription>
<NDC11Code>68462-0569-30</NDC11Code>
<ProductNDC>68462-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine And Olmesartan Medoxomil</ProprietaryName>
<NonProprietaryName>Amlodipine And Olmesartan Medoxomil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207807</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; OLMESARTAN MEDOXOMIL</SubstanceName>
<StrengthNumber>10; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine and olmesartan medoxomil tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with amlodipine and olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine and olmesartan medoxomil tablets may also be used as initial therapy in patients who are likely to need multiple antihypertensive agents to achieve their blood pressure goals. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, parallel-group factorial study [see Clinical Studies (14.1)] provide estimates of the probability of reaching a blood pressure goal with amlodipine and olmesartan medoxomil tablets compared to amlodipine or olmesartan medoxomil monotherapy. The figures below provide estimates of the likelihood of achieving the targeted systolic or diastolic blood pressure goals with amlodipine and olmesartan medoxomil tablets 10/40 mg compared with amlodipine or olmesartan medoxomil monotherapy, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling from all available data of that treatment group. The right tail of each curve is less reliable because of small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure (SBP) < 140 mmHg at Week 8 With LOCF. Figure 2: Probability of Achieving Diastolic Blood Pressure (DBP) < 90 mmHg at Week 8 With LOCF. Figure 3: Probability of Achieving Systolic Blood Pressure (SBP) < 130 mmHg at Week 8 With LOCF. Figure 4: Probability of Achieving Diastolic Blood Pressure (DBP) < 80 mmHg at Week 8 With LOCF. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 SBP <140 mmHg or <130 mmHg or a DBP <90 mmHg or <80 mmHg) for the high-dose treatment groups evaluated in the study. Amlodipine and olmesartan medoxomil tablets 5/20 mg, the lowest dose combination treatment group, increases the probability of reaching blood pressure goal compared with the highest dose monotherapies, amlodipine 10 mg and olmesartan medoxomil 40 mg. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 48% likelihood of achieving a goal of <140 mmHg (systolic) and a 51% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with olmesartan medoxomil 40 mg, and about a 46% likelihood of achieving a goal of <140 mmHg (systolic) and a 60% likelihood of achieving a goal of <90 mmHg (diastolic) on monotherapy with amlodipine 10 mg. The likelihood of achieving these same goals increases to 63% (systolic) and 71% (diastolic) on amlodipine and olmesartan medoxomil tablets 5/20 mg, and to 68% (systolic) and 85% (diastolic) on amlodipine and olmesartan medoxomil tablets 10/40 mg.</IndicationAndUsage>
<Description>Amlodipine and Olmesartan Medoxomil Tablets, USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. Amlodipine and Olmesartan Medoxomil Tablets, USP contain amlodipine besylate, USP and olmesartan medoxomil, USP. Amlodipine besylate, USP is chemically described as 3-ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridine dicarboxylate, monobenzenesulphonate. It is a white to off-white crystalline powder that is freely soluble in methanol, sparingly soluble in alcohol and slightly soluble in water and 2-propanol. The molecular formula and weight of amlodipine besylate, USP are C20H25ClN2O5C6H6O3S and 567.05 g/mol. It has the following structural formula. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan medoxomil, USP is chemically described as 1H-imidazole-5-carboxylic acid, 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl] methyl]-(5-methyl-2-oxo-1,3-dioxol-4-yl) methyl ester. It is a white to off-white crystalline powder that is sparingly soluble in methanol, practically insoluble in water, slightly soluble in acetone, and very slightly soluble in ethanol. The molecular formula and weight of olmesartan medoxomil, USP are C29H30N6O6 and 558.59 g/mol. It has the following structural formula:. Each tablet of Amlodipine and Olmesartan Medoxomil Tablets, USP also contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized corn starch. The color coatings for all tablet strengths contain polyvinyl alcohol, polyethylene glycol 3350, talc, and titanium dioxide. The 5 mg/40 mg tablets also contain iron oxide yellow. The 10 mg/20 mg tablets and 10 mg/40 mg tablets also contain iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>10544-569-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (10544-569-90)</PackageDescription>
<NDC11Code>10544-0569-90</NDC11Code>
<ProductNDC>10544-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemfibrozil</ProprietaryName>
<NonProprietaryName>Gemfibrozil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074270</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>GEMFIBROZIL</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator-activated Receptor alpha Agonists [MoA],PPAR alpha [CS],Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Gemfibrozil (Gemfibrozil tablets, USP) is indicated as adjunctive therapy to diet for: 1 Treatment of adult patients with very high elevations of serum triglyceride levels (Types IV and V hyperlipidemia) who present a risk of pancreatitis and who do not respond adequately to a determined dietary effort to control them. Patients who present such risk typically have serum triglycerides over 2000 mg/dL and have elevations of VLDL-cholesterol as well as fasting chylomicrons (Type V hyperlipidemia). Subjects who consistently have total serum or plasma triglycerides below 1000 mg/dL are unlikely to present a risk of pancreatitis. Gemfibrozil therapy may be considered for those subjects with triglyceride elevations between 1000 and 2000 mg/dL who have a history of pancreatitis or of recurrent abdominal pain typical of pancreatitis. It is recognized that some Type IV patients with triglycerides under 1000 mg/dL may, through dietary or alcoholic indiscretion, convert to a Type V pattern with massive triglyceride elevations accompanying fasting chylomicronemia, but the influence of Gemfibrozil therapy on the risk of pancreatitis in such situations has not been adequately studied. Drug therapy is not indicated for patients with Type I hyperlipoproteinemia, who have elevations of chylomicrons and plasma triglycerides, but who have normal levels of very low density lipoprotein (VLDL). Inspection of plasma refrigerated for 14 hours is helpful in distinguishing Types I, IV, and V hyperlipoproteinemia., 2 Reducing the risk of developing coronary heart disease only in Type IIb patients without history of or symptoms of existing coronary heart disease who have had an inadequate response to weight loss, dietary therapy, exercise, and other pharmacologic agents (such as bile acid sequestrants and nicotinic acid, known to reduce LDL- and raise HDL-cholesterol) and who have the following triad of lipid abnormalities: low HDL-cholesterol levels in addition to elevated LDL-cholesterol and elevated triglycerides (see WARNINGS, PRECAUTIONS, and CLINICAL PHARMACOLOGY). The National Cholesterol Education Program has defined a serum HDL-cholesterol value that is consistently below 35 mg/dL as constituting an independent risk factor for coronary heart disease. Patients with significantly elevated triglycerides should be closely observed when treated with Gemfibrozil. In some patients with high triglyceride levels, treatment with Gemfibrozil is associated with a significant increase in LDL-cholesterol. BECAUSE OF POTENTIAL TOXICITY SUCH AS MALIGNANCY, GALLBLADDER DISEASE, ABDOMINAL PAIN LEADING TO APPENDECTOMY AND OTHER ABDOMINAL SURGERIES, AN INCREASED INCIDENCE IN NON-CORONARY MORTALITY, AND THE 44% RELATIVE INCREASE DURING THE TRIAL PERIOD IN AGE-ADJUSTED ALL-CAUSE MORTALITY SEEN WITH THE CHEMICALLY AND PHARMACOLOGICALLY RELATED DRUG, CLOFIBRATE, THE POTENTIAL BENEFIT OF GEMFIBROZIL IN TREATING TYPE IIA PATIENTS WITH ELEVATIONS OF LDL-CHOLESTEROL ONLY IS NOT LIKELY TO OUTWEIGH THE RISKS. GEMFIBROZIL IS ALSO NOT INDICATED FOR THE TREATMENT OF PATIENTS WITH LOW HDL- CHOLESTEROL AS THEIR ONLY LIPID ABNORMALITY. .</IndicationAndUsage>
<Description>Gemfibrozil is a lipid regulating agent. It is available as tablets for oral administration. Each tablet contains 600 mg Gemfibrozil. Each tablet also contains calcium stearate, microcrystalline cellulose, hydroxypropyl cellulose, Opadry white, polysorbate 80, sodium starch glycolate, colloidal silicon dioxide, and pregelatinized starch. The chemical name is 5-(2,5-dimethylphenoxy)-2,2-dimethylpentanoic acid, with the following structural formula. The empirical formula is C 15H 22O 3 and the molecular weight is 250.35; the solubility in water and acid is 0.0019% and in dilute base it is greater than 1%. The melting point is 58°-61° C. Gemfibrozil is a white solid which is stable under ordinary conditions.</Description>
</NDC>
<NDC>
<NDCCode>21695-569-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (21695-569-90)</PackageDescription>
<NDC11Code>21695-0569-90</NDC11Code>
<ProductNDC>21695-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorzoxazone</ProprietaryName>
<NonProprietaryName>Chlorzoxazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089895</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>CHLORZOXAZONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>Chlorzoxazone USP is a centrally acting skeletal muscle relaxant, available as tablets of 500 mg for oral administration. Its chemical name is 5-Chloro-2-benzoxazolinone, and its structural formula is. C7H4CINO2 MW 169.57. Chlorzoxazone USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Chlorzoxazone tablets contain the inactive ingredients Docusate Sodium, Lactose (hydrous), Magnesium Stearate, Microcrystalline Cellulose, Pregelatinized Starch, Sodium Benzoate, and Sodium Starch Glycolate.</Description>
</NDC>
<NDC>
<NDCCode>42291-569-90</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (42291-569-90) </PackageDescription>
<NDC11Code>42291-0569-90</NDC11Code>
<ProductNDC>42291-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180724</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207515</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>27</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate hydrochloride (HCl) extended-release tablets are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in children 6 years of age and older, adolescents and adults up to the age of 65 [see Clinical Studies (14)] . A diagnosis of Attention Deficit Hyperactivity Disorder (ADHD; DSM-IV) implies the presence of hyperactive-impulsive or inattentive symptoms that caused impairment and were present before age 7 years. The symptoms must cause clinically significant impairment, e.g., in social, academic, or occupational functioning, and be present in two or more settings, e.g., school (or work) and at home. The symptoms must not be better accounted for by another mental disorder. For the Inattentive Type, at least six of the following symptoms must have persisted for at least 6 months: lack of attention to details/careless mistakes; lack of sustained attention; poor listener; failure to follow through on tasks; poor organization; avoids tasks requiring sustained mental effort; loses things; easily distracted; forgetful. For the Hyperactive-Impulsive Type, at least six of the following symptoms must have persisted for at least 6 months: fidgeting/squirming; leaving seat; inappropriate running/climbing; difficulty with quiet activities; “on the go;” excessive talking; blurting answers; can’t wait turn; intrusive. The Combined Type requires both inattentive and hyperactive-impulsive criteria to be met.</IndicationAndUsage>
<Description>Methylphenidate HCl extended-release tablets, USP are a central nervous system (CNS) stimulant. Methylphenidate HCl extended-release tablets, USP are available in four tablet strengths. Each extended-release tablet for once-a-day oral administration contains 18, 27, 36, or 54 mg of methylphenidate HCl, USP and is designed to have a 12-hour duration of effect. Chemically, methylphenidate HCl, USP is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C 14H 19NO 2HCl. Its structural formula is:. Methylphenidate HCl, USP is a white, odorless crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Methylphenidate HCl extended-release tablets, USP also contains the following inert ingredients: colloidal silicon dioxide, ethylcellulose, fumaric acid, hypromellose, mannitol, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, sodium chloride, stearic acid, talc, titanium dioxide and triethyl citrate. The 18 mg extended-release tablet also contains iron oxide black and iron oxide yellow. The 27 mg extended-release tablet also contains iron oxide black and iron oxide yellow. The 54 mg extended-release tablet also contains iron oxide red. USP dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>42549-569-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (42549-569-90)</PackageDescription>
<NDC11Code>42549-0569-90</NDC11Code>
<ProductNDC>42549-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride And Acetaminophen</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077184</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>37.5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tramadol hydrochloride and acetaminophen tablet is indicated for the short-term (five days or less) management of acute pain.</IndicationAndUsage>
<Description>Tramadol hydrochloride and acetaminophen tablet for oral administration (37.5 mg tramadol hydrochloride/325 mg acetaminophen tablets) combines two analgesics, tramadol and acetaminophen. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino) methyl]-1-(3-methoxyphenyl) cyclo-hexanol hydrochloride. Its structural formula is. The molecular formula of tramadol hydrochloride is C16H13NO2.HC1. The molecular weight of tramadol hydrochloride is 299.84. Tramadol hydrochloride is a white, bitter, crystalline and odorless powder. The chemical name for acetaminophen is N-acetyl-p-aminophenol. Its structural formula is. The molecular formula of acetaminophen is C8H9NO2. The molecular weight of acetaminophen is 151.17. Acetaminophen is an analgesic and antipyretic agent which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Tramadol hydrochloride and acetaminophen tablets contain 37.5 mg tramadol hydrochloride and 325 mg acetaminophen and are light yellow in color. Inactive ingredients in the tablet are microcrystalline cellulose, pregelatinized starch, sodium starch glycolate, corn starch, magnesium stearate, opadry yellow and povidone. In addition, opadry yellow contains: hydroxypropyl methyl cellulose, titanium dioxide, macrogol, talc, and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>45963-569-08</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (45963-569-08)</PackageDescription>
<NDC11Code>45963-0569-08</NDC11Code>
<ProductNDC>45963-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090797</ApplicationNumber>
<LabelerName>Actavis Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>49349-569-19</NDCCode>
<PackageDescription>90 TABLET in 1 CANISTER (49349-569-19)</PackageDescription>
<NDC11Code>49349-0569-19</NDC11Code>
<ProductNDC>49349-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diovan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130911</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021283</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>63187-569-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (63187-569-90) </PackageDescription>
<NDC11Code>63187-0569-90</NDC11Code>
<ProductNDC>63187-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20031201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021210</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levothyroxine sodium is used for the following indications. Hypothyroidism - As replacement or supplemental therapy in congenital or acquired hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. Specific indications include: primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) hypothyroidism and subclinical hypothyroidism. Primary hypothyroidism may result from functional deficiency, primary atrophy, partial or total congenital absence of the thyroid gland, or from the effects of surgery, radiation, or drugs, with or without the presence of goiter. Pituitary TSH Suppression - In the treatment or prevention of various types of euthyroid goiters (see WARNINGS and PRECAUTIONS), including thyroid nodules (see WARNINGS and PRECAUTIONS), subacute or chronic Iymphocytic thyroiditis (Hashimoto's thyroiditis), multinodular goiter (see WARNINGS and PRECAUTIONS), and, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer.</IndicationAndUsage>
<Description>Levothyroxine Sodium Tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown.</Description>
</NDC>
<NDC>
<NDCCode>63323-569-90</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (63323-569-90) > .8 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>63323-0569-90</NDC11Code>
<ProductNDC>63323-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150220</StartMarketingDate>
<EndMarketingDate>20201031</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020164</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS],Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150220</StartMarketingDatePackage>
<EndMarketingDatePackage>20200930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67544-569-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (67544-569-60) </PackageDescription>
<NDC11Code>67544-0569-60</NDC11Code>
<ProductNDC>67544-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxybutynin Chloride</ProprietaryName>
<NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071655</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxybutynin Chloride Tablets USP are indicated for the relief of symptoms of bladder instability associated with voiding in patients with uninhibited neurogenic or reflex neurogenic bladder (i.e., urgency, frequency, urinary leakage, urge incontinence, dysuria).</IndicationAndUsage>
<Description>Oxybutynin Chloride Tablets USP are very pale blue, round, biconvex, scored, debossed tablets containing 5 mg of oxybutynin chloride, USP. Chemically, oxybutynin chloride, USP is d,l (racemic) 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The structural formula appears below. C22H31NO3HCl M.W. 393.9. Oxybutynin chloride, USP is a white crystalline solid. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin Chloride Tablets USP also contain calcium stearate, microcrystalline cellulose, anhydrous lactose, sodium starch glycolate and FD&C Blue #1 Aluminum Lake. Oxybutynin Chloride Tablets USP are for oral administration. Meets USP Dissolution Test 2. Therapeutic Category: Antispasmodic, anticholinergic.</Description>
</NDC>
<NDC>
<NDCCode>68382-569-16</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (68382-569-16) </PackageDescription>
<NDC11Code>68382-0569-16</NDC11Code>
<ProductNDC>68382-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acamprosate Calcium</ProprietaryName>
<NonProprietaryName>Acamprosate Calcium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205995</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>ACAMPROSATE CALCIUM</SubstanceName>
<StrengthNumber>333</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-11-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acamprosate calcium delayed-release tablets are indicated for the maintenance of abstinence from alcohol in patients with alcohol dependence who are abstinent at treatment initiation (1, 14). Treatment with acamprosate calcium delayed-release tablets should be part of a comprehensive management program that includes psychosocial support (1).</IndicationAndUsage>
<Description>Acamprosate calcium, USP is supplied in an enteric-coated tablet for oral administration. Acamprosate calcium, USP is a synthetic compound with a chemical structure similar to that of the endogenous amino acid homotaurine, which is a structural analogue of the amino acid neurotransmitter γ-aminobutyric acid and the amino acid neuromodulator taurine. Its chemical name is calcium acetylaminopropane sulfonate. Its chemical formula is C10H20N2O8S2Ca and molecular weight is 400.5. Its structural formula is. Acamprosate calcium, USP is a white or almost white powder. It is freely soluble in water, practically insoluble in alcohol and in methylene chloride. Each acamprosate calcium delayed-release tablet intended for oral administration contains 333 mg of acamprosate calcium, USP equivalent to 300 mg of acamprosate. In addition, each tablet contains the following inactive ingredients: colloidal anhydrous silica, methacrylic acid copolymer type c, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium bicarbonate, sodium lauryl sulfate, sodium starch glycolate and talc. Sulfites were used in the synthesis of the drug substance and traces of residual sulfites may be present in the drug product.</Description>
</NDC>
<NDC>
<NDCCode>71205-569-90</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (71205-569-90) </PackageDescription>
<NDC11Code>71205-0569-90</NDC11Code>
<ProductNDC>71205-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140819</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200503</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2022-07-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations [see Warnings and Precautions (5.1)] , reserve tramadol hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Tramadol hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Tramadol hydrochloride is an opioid agonist in an extended-release tablet formulation for oral use. The chemical name is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. The molecular weight of tramadol HCl is 299.84. It is a white, bitter, crystalline and odorless powder that is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride extended-release tablets USP contain 100, 200 or 300 mg of tramadol HCl in an extended-release formulation. The tablets are white to off-white in color and contain the inactive ingredients: colloidal silicon dioxide, dibutyl sebacate, ethyl cellulose, microcrystalline cellulose, povidone, and sodium stearyl fumarate. The imprinting ink contains shellac, iron oxide black and propylene glycol. Tramadol hydrochloride extended-release tablets USP meet USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>71288-569-90</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (71288-569-90) * 1 VIAL, MULTI-DOSE in 1 CARTON (71288-565-03) / 2.8 mL in 1 VIAL, MULTI-DOSE * .5 mL in 1 PACKET (71288-350-91) </PackageDescription>
<NDC11Code>71288-0569-90</NDC11Code>
<ProductNDC>71288-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leuprolide Acetate</ProprietaryName>
<NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075471</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Leuprolide acetate injection is indicated in the palliative treatment of advanced prostatic cancer.</IndicationAndUsage>
<Description>Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH or LH-RH). The analog possesses greater potency than the natural hormone. The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. Leuprolide Acetate Injection is a sterile, aqueous solution intended for subcutaneous injection. It is available in a 2.8 mL multiple-dose vial containing 5 mg per mL of leuprolide acetate, 6.3 mg per mL sodium chloride for tonicity adjustment, 9 mg per mL of benzyl alcohol as a preservative and water for injection. The pH may have been adjusted with sodium hydroxide and/or acetic acid.</Description>
</NDC>
<NDC>
<NDCCode>76282-569-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (76282-569-90) </PackageDescription>
<NDC11Code>76282-0569-90</NDC11Code>
<ProductNDC>76282-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211384</ApplicationNumber>
<LabelerName>Exelan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-06-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for: 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, USP along with pregelatinized starch, corn starch and talc as inactive ingredients. Capsule shells for 25 mg, 50 mg & 150 mg contains: gelatin & titanium dioxide. Capsule shells for 75 mg, 100 mg, 200 mg, 225 mg & 300 mg contains: gelatin, FD&C Blue No.1, FD&C Red No.40, FD&C Yellow No.6 and titanium dioxide. Imprinting ink contains: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water.</Description>
</NDC>
<NDC>
<NDCCode>76420-569-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76420-569-90) </PackageDescription>
<NDC11Code>76420-0569-90</NDC11Code>
<ProductNDC>76420-569</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Np Thyroid 90</ProprietaryName>
<NonProprietaryName>Levothyroxine, Liothyronine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE; LIOTHYRONINE</SubstanceName>
<StrengthNumber>57; 13.5</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], Triiodothyronine [CS], l-Thyroxine [EPC], l-Triiodothyronine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230516</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE: NP Thyroid® tablets (thyroid tablets, USP) are indicated: 1. As replacement or supplemental therapy in patients with hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. This category includes cretinism, myxedema, and ordinary hypothyroidism in patients of any age (children, adults, the elderly), or state (including pregnancy); primary hypothyroidism resulting from functional deficiency, primary atrophy, partial or total absence of thyroid gland, or the effects of surgery, radiation, or drugs, with or without the presence of goiter; and secondary (pituitary), or tertiary (hypothalamic) hypothyroidism (See WARNINGS). 2. As pituitary TSH suppressants, in the treatment or prevention of various types of euthyroid goiters, including thyroid nodules, subacute or chronic lymphocytic thyroiditis (Hashimoto’s), multinodular goiter, and in the management of thyroid cancer.</IndicationAndUsage>
<Description>NP Thyroid® (thyroid tablets, USP) for oral use is a natural preparation derived from porcine thyroid glands. They contain both tetraiodothyronine sodium (T4 levothyroxine) and triiodothyronine sodium (T3 liothyronine) providing 38 mcg levothyroxine (T4) and 9 mcg liothyronine (T3) per grain of thyroid. The inactive ingredients are calcium stearate, dextrose (agglomerated) and mineral oil. Contains no ingredient made from a gluten-containing grain (wheat, barley, rye).</Description>
</NDC>
<NDC>
<NDCCode>68462-120-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (68462-120-90) </PackageDescription>
<NDC11Code>68462-0120-90</NDC11Code>
<ProductNDC>68462-120</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
<NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216357</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>I. Stable Angina. Nicardipine hydrochloride capsules are indicated for the management of patients with chronic stable angina (effort-associated angina). Nicardipine hydrochloride capsules may be used alone or in combination with beta-blockers. II. Hypertension. Nicardipine hydrochloride capsules are indicated for the treatment of hypertension. Nicardipine hydrochloride capsules may be used alone or in combination with other antihypertensive drugs. In administering nicardipine it is important to be aware of the relatively large peak to trough differences in blood pressure effect (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Nicardipine Hydrochloride Capsules for oral administration each contain 20 mg or 30 mg of nicardipine hydrochloride, USP. Nicardipine Hydrochloride Capsules are a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride, USP is a dihydropyridine structure with the IUPAC (International Union of Pure and Applied Chemistry) chemical name 2-(benzyl-methyl amino)ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m‑nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride, and it has the following structure. Nicardipine Hydrochloride, USP. Molecular Formula C26H29N3O6. HCl. Nicardipine hydrochloride, USP is a pale greenish-yellow, odorless, crystalline powder that melts at about 167°C to 171°C. It is freely soluble in methanol and acetic acid, sparingly soluble in ethanol, slightly soluble in water. It has a molecular weight of 515.99. Each Nicardipine Hydrochloride Capsules, for oral administration, contains 20 mg or 30 mg nicardipine hydrochloride, USP. In addition, each capsule contains the following inactive ingredients: magnesium stearate, pregelatinized starch, titanium dioxide, gelatin and FD&C blue #1. The black printing ink contains black iron oxide, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-121-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (68462-121-90) </PackageDescription>
<NDC11Code>68462-0121-90</NDC11Code>
<ProductNDC>68462-121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
<NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216357</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>I. Stable Angina. Nicardipine hydrochloride capsules are indicated for the management of patients with chronic stable angina (effort-associated angina). Nicardipine hydrochloride capsules may be used alone or in combination with beta-blockers. II. Hypertension. Nicardipine hydrochloride capsules are indicated for the treatment of hypertension. Nicardipine hydrochloride capsules may be used alone or in combination with other antihypertensive drugs. In administering nicardipine it is important to be aware of the relatively large peak to trough differences in blood pressure effect (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Nicardipine Hydrochloride Capsules for oral administration each contain 20 mg or 30 mg of nicardipine hydrochloride, USP. Nicardipine Hydrochloride Capsules are a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride, USP is a dihydropyridine structure with the IUPAC (International Union of Pure and Applied Chemistry) chemical name 2-(benzyl-methyl amino)ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m‑nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride, and it has the following structure. Nicardipine Hydrochloride, USP. Molecular Formula C26H29N3O6. HCl. Nicardipine hydrochloride, USP is a pale greenish-yellow, odorless, crystalline powder that melts at about 167°C to 171°C. It is freely soluble in methanol and acetic acid, sparingly soluble in ethanol, slightly soluble in water. It has a molecular weight of 515.99. Each Nicardipine Hydrochloride Capsules, for oral administration, contains 20 mg or 30 mg nicardipine hydrochloride, USP. In addition, each capsule contains the following inactive ingredients: magnesium stearate, pregelatinized starch, titanium dioxide, gelatin and FD&C blue #1. The black printing ink contains black iron oxide, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-159-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68462-159-90) </PackageDescription>
<NDC11Code>68462-0159-90</NDC11Code>
<ProductNDC>68462-159</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078170</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC],Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080523</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68462-160-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68462-160-90) </PackageDescription>
<NDC11Code>68462-0160-90</NDC11Code>
<ProductNDC>68462-160</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078170</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>850</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC],Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080523</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68462-161-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68462-161-90) </PackageDescription>
<NDC11Code>68462-0161-90</NDC11Code>
<ProductNDC>68462-161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078170</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC],Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080523</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68462-195-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68462-195-90) </PackageDescription>
<NDC11Code>68462-0195-90</NDC11Code>
<ProductNDC>68462-195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070511</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077987</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pravastatin sodium tablets are indicated:1.To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD).2.To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD.3.As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia.4.As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH).5.As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemia.Hypertriglyceridemia.</IndicationAndUsage>
<Description>Pravastatin Sodium Tablets, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium stearate, mannitol, meglumine, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>68462-196-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68462-196-90) </PackageDescription>
<NDC11Code>68462-0196-90</NDC11Code>
<ProductNDC>68462-196</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070511</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077987</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pravastatin sodium tablets are indicated:1.To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD).2.To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD.3.As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia.4.As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH).5.As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemia.Hypertriglyceridemia.</IndicationAndUsage>
<Description>Pravastatin Sodium Tablets, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium stearate, mannitol, meglumine, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>68462-197-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68462-197-90) </PackageDescription>
<NDC11Code>68462-0197-90</NDC11Code>
<ProductNDC>68462-197</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070511</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077987</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pravastatin sodium tablets are indicated:1.To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD).2.To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD.3.As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia.4.As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH).5.As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemia.Hypertriglyceridemia.</IndicationAndUsage>
<Description>Pravastatin Sodium Tablets, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium stearate, mannitol, meglumine, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>68462-198-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68462-198-90) </PackageDescription>
<NDC11Code>68462-0198-90</NDC11Code>
<ProductNDC>68462-198</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077987</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pravastatin sodium tablets are indicated:1.To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD).2.To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD.3.As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia.4.As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH).5.As an adjunct to diet for the treatment of adults with:Primary dysbetalipoproteinemia.Hypertriglyceridemia.</IndicationAndUsage>
<Description>Pravastatin Sodium Tablets, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (>300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium stearate, mannitol, meglumine, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>68462-199-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68462-199-90) </PackageDescription>
<NDC11Code>68462-0199-90</NDC11Code>
<ProductNDC>68462-199</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140707</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090032</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2) .</IndicationAndUsage>
<Description>Telmisartan Tablets, USP are a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.6 and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>68462-200-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68462-200-90) </PackageDescription>
<NDC11Code>68462-0200-90</NDC11Code>
<ProductNDC>68462-200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140707</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090032</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2) .</IndicationAndUsage>
<Description>Telmisartan Tablets, USP are a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.6 and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>68462-201-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68462-201-90) </PackageDescription>
<NDC11Code>68462-0201-90</NDC11Code>
<ProductNDC>68462-201</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140707</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090032</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2) .</IndicationAndUsage>
<Description>Telmisartan Tablets, USP are a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.6 and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>68462-208-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68462-208-90) </PackageDescription>
<NDC11Code>68462-0208-90</NDC11Code>
<ProductNDC>68462-208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Moexipril Hydrochloride</ProprietaryName>
<NonProprietaryName>Moexipril Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101231</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090416</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>MOEXIPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Moexipril hydrochloride tablets are indicated for treatment of patients with hypertension. They may be used alone or in combination with thiazide diuretics. In using moexipril hydrochloride tablets, consideration should be given to the fact that another ACE inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen-vascular disease. Available data are insufficient to show that moexipril hydrochloride tablets do not have a similar risk (see WARNINGS). In considering use of moexipril hydrochloride tablets, it should be noted that in controlled trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, ACE inhibitors (for which adequate data are available) cause a higher rate of angioedema in black than in non-black patients (see WARNINGS, Angioedema).</IndicationAndUsage>
<Description>Moexipril hydrochloride USP, the hydrochloride salt of moexipril, has the empirical formula C27H34N2O7HCl and a molecular weight of 535.04. It is chemically described as [3S-[2[R*(R*)],3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]- 1,2,3,4-tetrahydro-6,7-dimethoxy-3-iso-quinolinecarboxylic acid, monohydrochloride. It is a non-sulfhydryl containing precursor of the active angiotensin-converting enzyme (ACE) inhibitor moexiprilat and its structural formula is:. Moexipril hydrochloride USP is a fine white to off-white powder. It is soluble (about 10% weight-to-volume) in distilled water at room temperature. Moexipril hydrochloride tablets USP are supplied as scored, coated tablets containing 7.5 mg and 15 mg of moexipril hydrochloride USP for oral administration. In addition to the active ingredient, moexipril hydrochloride USP, the tablet core contains the following inactive ingredients: crospovidone, lactose monohydrate, magnesium oxide, magnesium stearate and povidone. The film coating contains: hypromellose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 6000, magnesium stearate, ferric oxide red, ferric oxide black and ferric oxide yellow (15 mg tablet only).</Description>
</NDC>
</NDCList>