{
"NDC": [
{
"NDCCode": "68462-590-89",
"PackageDescription": "1 BOTTLE in 1 CARTON (68462-590-89) / 118.28 mL in 1 BOTTLE",
"NDC11Code": "68462-0590-89",
"ProductNDC": "68462-590",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinolone Acetonide",
"NonProprietaryName": "Fluocinolone Acetonide",
"DosageFormName": "OIL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181030",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210539",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "FLUOCINOLONE ACETONIDE",
"StrengthNumber": ".11",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181030",
"SamplePackage": "N",
"IndicationAndUsage": "Fluocinolone acetonide topical oil, 0.01% is a low to medium potency corticosteroid indicated. In adult patients for the treatment of psoriasis of the scalp (Scalp Oil).",
"Description": "Fluocinolone Acetonide Topical Oil, 0.01% contains fluocinolone acetonide, USP (6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene) bis-(oxy)]-pregna-1,4-diene-3,20-dione, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide Topical Oil, 0.01%, fluocinolone acetonide for use as body oil for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older and as fluocinolone acetonide oil, 0.01% for chronic eczematous external otitis. Chemically, fluocinolone acetonide, USP is C24H30F2O6. It has the following structural formula. Fluocinolone acetonide, USP in Fluocinolone Acetonide Topical Oil, 0.01% has a molecular weight of 452.49. It is a white to almost white, crystalline powder and melts at about 270°C with decomposition; practically insoluble in water and heptane, soluble in methanol, anhydrous ethanol and acetone, slightly soluble in ether and chloroform. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide, USP in a blend of oils, which contains anhydrous citric acid, isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic."
},
{
"NDCCode": "68462-513-89",
"PackageDescription": "1 BOTTLE in 1 CARTON (68462-513-89) > 118 mL in 1 BOTTLE",
"NDC11Code": "68462-0513-89",
"ProductNDC": "68462-513",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desonide",
"NonProprietaryName": "Desonide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170926",
"EndMarketingDate": "20230501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209494",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "DESONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170926",
"EndMarketingDatePackage": "20230501",
"SamplePackage": "N"
},
{
"NDCCode": "68462-591-89",
"PackageDescription": "1 BOTTLE in 1 CARTON (68462-591-89) / 118.28 mL in 1 BOTTLE",
"NDC11Code": "68462-0591-89",
"ProductNDC": "68462-591",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinolone Acetonide",
"NonProprietaryName": "Fluocinolone Acetonide",
"DosageFormName": "OIL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210556",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "FLUOCINOLONE ACETONIDE",
"StrengthNumber": ".11",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20181026",
"SamplePackage": "N",
"IndicationAndUsage": "Fluocinolone acetonide body oil is a corticosteroid indicated for the topical treatment of: 1 atopic dermatitis in adults (1), 2 moderate to severe atopic dermatitis in pediatric patients 3 months of age and older (1).",
"Description": "Fluocinolone Acetonide body oil, 0.01% (fluocinolone acetonide), topical oil, 0.01% contains fluocinolone acetonide, USP (6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17 [(1-methylethylidene)bis-(oxy)]-pregna-1,4-diene-3,20-dione, a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide, USP is C24 H30 F2 O6. It has the following structural formula. Fluocinolone acetonide, USP has a molecular weight of 452.49. It is a white to almost white, crystalline powder and melts at 270°C with decomposition; practically insoluble in water and heptane; soluble in methanol, anhydrous ethanol and acetone; slightly soluble in ether and chloroform. Each gram of Fluocinolone Acetonide Topical Oil contains approximately 0.11 mg of fluocinolone acetonide, USP in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2, refined peanut oil. Fluocinolone Acetonide body oil is formulated with 48% refined peanut oil. The bulk refined peanut oil, used in fluocinolone acetonide body oil is heated at 246°C (475°F) for at least 15 minutes. The refined peanut oil used in fluocinolone acetonide body oil is routinely tested for peanut proteins through amino acid analysis; the quantity of amino acids is below 0.5 parts per million (ppm)."
},
{
"NDCCode": "68462-220-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (68462-220-01) ",
"NDC11Code": "68462-0220-01",
"ProductNDC": "68462-220",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20090203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079139",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090203",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].",
"Description": "Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89."
},
{
"NDCCode": "68462-220-11",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (68462-220-11) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "68462-0220-11",
"ProductNDC": "68462-220",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20090203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079139",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090203",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].",
"Description": "Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89."
},
{
"NDCCode": "68462-221-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (68462-221-01) ",
"NDC11Code": "68462-0221-01",
"ProductNDC": "68462-221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20090203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079139",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090203",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].",
"Description": "Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89."
},
{
"NDCCode": "68462-221-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (68462-221-10) ",
"NDC11Code": "68462-0221-10",
"ProductNDC": "68462-221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20090203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079139",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090203",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].",
"Description": "Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89."
},
{
"NDCCode": "68462-221-11",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68462-221-11) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "68462-0221-11",
"ProductNDC": "68462-221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20090203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079139",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090203",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].",
"Description": "Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89."
},
{
"NDCCode": "68462-222-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (68462-222-01) ",
"NDC11Code": "68462-0222-01",
"ProductNDC": "68462-222",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20090203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079139",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090203",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].",
"Description": "Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89."
},
{
"NDCCode": "68462-222-11",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (68462-222-11) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "68462-0222-11",
"ProductNDC": "68462-222",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20090203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079139",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090203",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].",
"Description": "Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89."
},
{
"NDCCode": "68462-223-01",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-223-01) ",
"NDC11Code": "68462-0223-01",
"ProductNDC": "68462-223",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20101227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091544",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101227",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium carbonate extended-release tablets are indicated in the treatment of manic episodes of Bipolar Disorder. Bipolar Disorder, Manic (DSM-IV) is equivalent to Manic Depressive illness, Manic, in the older DSM-II terminology. Lithium carbonate extended-release tablets are also indicated as a maintenance treatment for individuals with a diagnosis of Bipolar Disorder. Maintenance therapy reduces the frequency of manic episodes and diminishes the intensity of those episodes which may occur. Typical symptoms of mania include pressure of speech, motor hyperactivity, reduced need for sleep, flight of ideas, grandiosity, elation, poor judgment, aggressiveness, and possibly hostility. When given to a patient experiencing a manic episode, lithium may produce a normalization of symptomatology within 1 to 3 weeks.",
"Description": "Lithium Carbonate Extended-Release Tablets, USP contain lithium carbonate, USP a white crystalline powder with molecular formula Li2CO3 and molecular weight 73.89. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Each light pink to pink colored circular, biconvex, coated, extended-release tablet contains 300 mg of lithium carbonate, USP. This slowly dissolving film-coated tablet is designed to give lower serum lithium peak concentrations than obtained with conventional oral lithium dosage forms. Inactive ingredients consist of sodium chloride, povidone, sorbitol, sodium starch glycolate, sodium lauryl sulfate, calcium stearate, hypromellose, titanium dioxide, polyethylene glycol and iron oxide red. Product meets USP Dissolution Test 1."
},
{
"NDCCode": "68462-224-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (68462-224-01) ",
"NDC11Code": "68462-0224-01",
"ProductNDC": "68462-224",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091616",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "450",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110214",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium Carbonate Extended-Release Tablets are indicated in the treatment of manic episodes of manic-depressive illness. Maintenance therapy prevents or diminishes the intensity of subsequent episodes in those manic-depressive patients with a history of mania. Typical symptoms of mania include pressure of speech, motor hyperactivity, reduced need for sleep, flight of ideas, grandiosity, elation, poor judgment, aggressiveness and possibly hostility. When given to a patient experiencing a manic episode, Lithium Carbonate Extended-Release Tablets may produce a normalization of symptomatology within 1 to 3 weeks.",
"Description": "Lithium Carbonate Extended-Release Tablets USP, contain lithium carbonate USP, a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89 g/mol. Lithium is an element of the alkali‑metal group with atomic number 3, atomic weight 6.94 and an emission line at 671 nm on the flame photometer. Lithium Carbonate Extended-Release Tablets USP. Each off-white to pale yellow, circular, beveled edged, biconvex uncoated tablets with ‘224’ debossed on one side, ‘G’ and a break line debossed on the other side, contains lithium carbonate, 450 mg. Inactive ingredients consist of ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, sodium alginate, sodium starch glycolate and talc. Product meets USP Dissolution Test 2. Lithium Carbonate Extended-Release Tablets USP, 450 mg are designed to release a portion of the dose initially and the remainder gradually; the release pattern of the controlled release tablets reduces the variability in lithium blood levels seen with the immediate release dosage forms."
},
{
"NDCCode": "68462-224-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (68462-224-10) ",
"NDC11Code": "68462-0224-10",
"ProductNDC": "68462-224",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091616",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "450",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110214",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium Carbonate Extended-Release Tablets are indicated in the treatment of manic episodes of manic-depressive illness. Maintenance therapy prevents or diminishes the intensity of subsequent episodes in those manic-depressive patients with a history of mania. Typical symptoms of mania include pressure of speech, motor hyperactivity, reduced need for sleep, flight of ideas, grandiosity, elation, poor judgment, aggressiveness and possibly hostility. When given to a patient experiencing a manic episode, Lithium Carbonate Extended-Release Tablets may produce a normalization of symptomatology within 1 to 3 weeks.",
"Description": "Lithium Carbonate Extended-Release Tablets USP, contain lithium carbonate USP, a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89 g/mol. Lithium is an element of the alkali‑metal group with atomic number 3, atomic weight 6.94 and an emission line at 671 nm on the flame photometer. Lithium Carbonate Extended-Release Tablets USP. Each off-white to pale yellow, circular, beveled edged, biconvex uncoated tablets with ‘224’ debossed on one side, ‘G’ and a break line debossed on the other side, contains lithium carbonate, 450 mg. Inactive ingredients consist of ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, sodium alginate, sodium starch glycolate and talc. Product meets USP Dissolution Test 2. Lithium Carbonate Extended-Release Tablets USP, 450 mg are designed to release a portion of the dose initially and the remainder gradually; the release pattern of the controlled release tablets reduces the variability in lithium blood levels seen with the immediate release dosage forms."
},
{
"NDCCode": "68462-224-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (68462-224-30) ",
"NDC11Code": "68462-0224-30",
"ProductNDC": "68462-224",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091616",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "450",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110214",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium Carbonate Extended-Release Tablets are indicated in the treatment of manic episodes of manic-depressive illness. Maintenance therapy prevents or diminishes the intensity of subsequent episodes in those manic-depressive patients with a history of mania. Typical symptoms of mania include pressure of speech, motor hyperactivity, reduced need for sleep, flight of ideas, grandiosity, elation, poor judgment, aggressiveness and possibly hostility. When given to a patient experiencing a manic episode, Lithium Carbonate Extended-Release Tablets may produce a normalization of symptomatology within 1 to 3 weeks.",
"Description": "Lithium Carbonate Extended-Release Tablets USP, contain lithium carbonate USP, a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89 g/mol. Lithium is an element of the alkali‑metal group with atomic number 3, atomic weight 6.94 and an emission line at 671 nm on the flame photometer. Lithium Carbonate Extended-Release Tablets USP. Each off-white to pale yellow, circular, beveled edged, biconvex uncoated tablets with ‘224’ debossed on one side, ‘G’ and a break line debossed on the other side, contains lithium carbonate, 450 mg. Inactive ingredients consist of ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, sodium alginate, sodium starch glycolate and talc. Product meets USP Dissolution Test 2. Lithium Carbonate Extended-Release Tablets USP, 450 mg are designed to release a portion of the dose initially and the remainder gradually; the release pattern of the controlled release tablets reduces the variability in lithium blood levels seen with the immediate release dosage forms."
},
{
"NDCCode": "68462-777-35",
"PackageDescription": "25 VIAL in 1 CARTON (68462-777-35) / 10 mL in 1 VIAL (68462-777-10) ",
"NDC11Code": "68462-0777-35",
"ProductNDC": "68462-777",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20251008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251008",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-778-55",
"PackageDescription": "25 VIAL in 1 CARTON (68462-778-55) / 20 mL in 1 VIAL (68462-778-20) ",
"NDC11Code": "68462-0778-55",
"ProductNDC": "68462-778",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20251008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251008",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-778-74",
"PackageDescription": "10 VIAL in 1 CARTON (68462-778-74) / 20 mL in 1 VIAL (68462-778-20) ",
"NDC11Code": "68462-0778-74",
"ProductNDC": "68462-778",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20251008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251008",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-793-55",
"PackageDescription": "25 VIAL in 1 CARTON (68462-793-55) / 20 mL in 1 VIAL (68462-793-20) ",
"NDC11Code": "68462-0793-55",
"ProductNDC": "68462-793",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20250807",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250807",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-793-74",
"PackageDescription": "10 VIAL in 1 CARTON (68462-793-74) / 20 mL in 1 VIAL (68462-793-20) ",
"NDC11Code": "68462-0793-74",
"ProductNDC": "68462-793",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20250807",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250807",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-794-62",
"PackageDescription": "25 VIAL in 1 CARTON (68462-794-62) / 30 mL in 1 VIAL (68462-794-30) ",
"NDC11Code": "68462-0794-62",
"ProductNDC": "68462-794",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20250807",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250807",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-794-84",
"PackageDescription": "10 VIAL in 1 CARTON (68462-794-84) / 30 mL in 1 VIAL (68462-794-30) ",
"NDC11Code": "68462-0794-84",
"ProductNDC": "68462-794",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20250807",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250807",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-795-55",
"PackageDescription": "25 VIAL in 1 CARTON (68462-795-55) / 20 mL in 1 VIAL (68462-795-20) ",
"NDC11Code": "68462-0795-55",
"ProductNDC": "68462-795",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20250807",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250807",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "0078-1224-61",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0078-1224-61) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00078-1224-61",
"ProductNDC": "0078-1224",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Locametz",
"NonProprietaryName": "Kit For The Preparation Of Gallium Ga 68 Gozetotide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220323",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215841",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "GOZETOTIDE",
"StrengthNumber": "25",
"StrengthUnit": "ug/1",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "LOCAMETZ, after radiolabeling with gallium-68, is indicated for positron emission tomography (PET) of prostate-specific membrane antigen (PSMA)-positive lesions in men with prostate cancer: 1 with suspected metastasis who are candidates for initial definitive therapy., 2 with suspected recurrence based on elevated serum prostate-specific antigen (PSA) level., 3 for selection of patients who are indicated for PSMA-directed therapy as described in the prescribing information of the therapeutic products.",
"Description": "LOCAMETZ (kit for the preparation of gallium Ga 68 gozetotide injection) is a sterile, radioactive diagnostic agent for intravenous administration after radiolabeling. Each vial contains 25 micrograms of gozetotide, 1 mg gentisic acid, 78 mg of sodium acetate trihydrate, and 40 mg sodium chloride. Gozetotide is also known as PSMA-11. After reconstitution and radiolabeling of LOCAMETZ, the vial contains gallium Ga 68 gozetotide injection at a radioactivity of up to 2,590 MBq (70 mCi) in up to 10 mL at calibration date and time. The vial also contains hydrochloric acid derived from the gallium-68 chloride solution. Gallium Ga 68 gozetotide injection has a pH between 3.2 to 6.5. Gallium Ga 68 gozetotide is a urea based peptidomimetic that has a covalently bound chelator (HBED-CC). The peptide has amino acid sequence OH-Glu-CO-Lys(Ahx-CC-HBED)-OH. Gallium Ga 68 gozetotide has a molecular weight of 1011.91 g/mol. The chemical structure is shown in Figure 3. Figure 3. Chemical Structure of Gallium Ga 68 Gozetotide."
},
{
"NDCCode": "0363-0041-33",
"PackageDescription": "590 mL in 1 BOTTLE (0363-0041-33)",
"NDC11Code": "00363-0041-33",
"ProductNDC": "0363-0041",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Walgreen Nighttime",
"ProprietaryNameSuffix": "Cold And Flu Relief",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hydrobromide And Doxylamine Succinate Liquid",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20090709",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Walgreen Company",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE",
"StrengthNumber": "500; 15; 6.25",
"StrengthUnit": "mg/15mL; mg/15mL; mg/15mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "10122-590-02",
"PackageDescription": "1 CANISTER in 1 CARTON (10122-590-02) / 120 AEROSOL, METERED in 1 CANISTER",
"NDC11Code": "10122-0590-02",
"ProductNDC": "10122-590",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trimbow",
"NonProprietaryName": "Beclomethasone Dipropionate/formoterol Fumarate/glycopyrrolate",
"DosageFormName": "AEROSOL, METERED",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20260514",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA219622",
"LabelerName": "Chiesi USA, Inc.",
"SubstanceName": "BECLOMETHASONE DIPROPIONATE; FORMOTEROL FUMARATE; GLYCOPYRROLATE",
"StrengthNumber": "172; 4.9; 10.6",
"StrengthUnit": "ug/1; ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260514",
"SamplePackage": "Y",
"IndicationAndUsage": "TRIMBOW is indicated for the maintenance treatment of asthma in adult patients aged 18 years and older. Limitations of Use. TRIMBOW is NOT indicated for relief of acute bronchospasm [see Warnings and Precautions (5.2)].",
"Description": "TRIMBOW (beclomethasone dipropionate, formoterol fumarate and glycopyrrolate) Inhalation Aerosol is a pressurized metered-dose inhaler that delivers a combination of beclomethasone dipropionate [an inhaled corticosteroid (ICS)], formoterol fumarate [an inhaled long-acting beta2-adrenergic agonist (a LABA)] and glycopyrrolate (an anticholinergic) for oral inhalation. Beclomethasone dipropionate, an inhaled corticosteroid [ICS], has the chemical name. [2-[(8S,9R,10S,11S,13S,14S,16S,17R)-9-chloro-11-hydroxy-10,13,16-trimethyl-3-oxo-17-propanoyloxy-6,7,8,11,12,14,15,16-octahydrocyclopenta[a]phenanthren-17-yl]-2-oxoethyl] propanoate. Beclomethasone dipropionate is a white to creamy white, odorless powder, insoluble in water, freely soluble in acetone, and sparingly soluble in alcohol, with a molecular weight of 521.04218 g/mol, and the molecular formula is C28H37ClO7. The structural formula is as follows:. Formoterol fumarate, a long-acting β2 agonist has the chemical name (E)-but-2-enedioic acid; N-[2-hydroxy-5-[(1R)-1-hydroxy-2-[[(1R)-2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]-formamide dihydrate. Formoterol fumarate is a powder that is slightly soluble in water. Formoterol fumarate has a molecular weight of 840.91 g/mol, and the molecular formula is C42H52N4O12. The structural formula is as follows:. Formoterol fumarate contains two chiral centers and consists of a single enantiomeric pair (a racemate of R,R and S,S) . Glycopyrrolate is a quarternary ammonium bromide salt with the following chemical name: [RS-]-3-[(SR)-(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl-Pyrrolidinium bromide. Two asymmetric atoms of carbon are present in the molecule: Glycopyrronium bromide is represented by the (R,S)-(S,R) racemic pair of enantiomers, corresponding to the threo diastereoisomeric structure. Glycopyrrolate is a powder that is freely soluble in water. Glycopyrrolate has a molecular weight of 398.33 g/mol, and the molecular formula is C19H28BrNO3. The structural formula is as follows. Glycopyrrolate contains two chiral centers and is a racemate of a 1;1 mixture of the R,S and S,R diastereomers. The active moiety, glycopyrronium, is the positively charged ion of glycopyrrolate. TRIMBOW 86 mcg/4.9 mcg/10.6 mcg and TRIMBOW 172 mcg/4.9 mcg/10.6 mcg are formulated as a hydrofluoroalkane (HFA 134a) propelled pressurized, metered-dose inhalers, each containing 120 actuations. The canister is supplied with a grey plastic actuator with an integrated dose counter mechanism and mouthpiece, and a red cap (TRIMBOW 86 mcg/4.9 mcg/10.6 mcg) or a green cap (TRIMBOW 172 mcg/4.9 mcg/10.6 mcg). As a solution, TRIMBOW does not need to be shaken before use. TRIMBOW should be “primed” by actuating 2 times prior to using the first dose from a new canister. If the inhaler has not been used for 30 days or longer, re-prime the inhaler [see How Supplied/Storage and Handling (16)]. After priming, each actuation meters 100 or 200 mcg of beclomethasone dipropionate, 6.0 mcg of formoterol fumarate (equivalent to 5.7 mcg of formoterol fumarate anhydrous), and 12.5 mcg of glycopyrrolate (equivalent to 10 mcg of glycopyrronium) in 73.8 mg of solution from the valve and delivers 86 or 172 mcg of beclomethasone dipropionate, 4.9 mcg of formoterol fumarate (equivalent to 4.2 mcg of formoterol fumarate anhydrous), and 10.6 mcg of glycopyrrolate (equivalent to 8.5 mcg of glycopyrronium) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as coordination of the device (metered dose inhaler [MDI]) actuation with the inhalation maneuver, inspiratory flow and peak inspiratory flow through the delivery system, which may vary in patients with asthma and other pulmonary diseases and conditions. Avoid spraying in the eyes or face while using TRIMBOW. TRIMBOW contains dehydrated alcohol (18% v/v), HFA 134a, and hydrochloric acid as excipients in the formulation."
},
{
"NDCCode": "10135-590-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (10135-590-01)",
"NDC11Code": "10135-0590-01",
"ProductNDC": "10135-590",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pilocarpine Hydrochloride",
"NonProprietaryName": "Pilocarpine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077220",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "PILOCARPINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Agonists [MoA],Cholinergic Muscarinic Agonists [MoA],Cholinergic Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Pilocarpine hydrochloride tablets, USP are indicated for 1) the treatment of symptoms of dry mouth from salivary gland hypofunction caused by radiotherapy for cancer of the head and neck; and 2) the treatment of symptoms of dry mouth in patients with Sjogren’s syndrome.",
"Description": "Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride, USP is a hygroscopic, odorless, bitter tasting white crystal or powder, which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, USP with a chemical name of (3S-cis)-2(3H)-Furanone, 3-ethyldihydro-4-[(1-methyl-1H-imidazol-5-yl) methyl] monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet’s film coating is: polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Each 7.5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet’s film coating is: FD&C Blue #2/Indigo Carmine aluminum lake, polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc."
},
{
"NDCCode": "10237-590-10",
"PackageDescription": "1020.58 kg in 1 SUPERSACK (10237-590-10) ",
"NDC11Code": "10237-0590-10",
"ProductNDC": "10237-590",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "POWDER",
"StartMarketingDate": "19770130",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Church & Dwight Co., Inc.",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2024-03-14",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "30-JAN-77"
},
{
"NDCCode": "10237-590-25",
"PackageDescription": "22.68 kg in 1 BAG (10237-590-25) ",
"NDC11Code": "10237-0590-25",
"ProductNDC": "10237-590",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "POWDER",
"StartMarketingDate": "19770130",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Church & Dwight Co., Inc.",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2024-03-14",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "30-JAN-77"
},
{
"NDCCode": "10237-590-90",
"PackageDescription": "90718.47 kg in 1 PACKAGE (10237-590-90) ",
"NDC11Code": "10237-0590-90",
"ProductNDC": "10237-590",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "POWDER",
"StartMarketingDate": "19770130",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Church & Dwight Co., Inc.",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2024-03-14",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "30-JAN-77"
},
{
"NDCCode": "10544-590-28",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (10544-590-28)",
"NDC11Code": "10544-0590-28",
"ProductNDC": "10544-590",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100303",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68462-590-89</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (68462-590-89) / 118.28 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>68462-0590-89</NDC11Code>
<ProductNDC>68462-590</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinolone Acetonide</ProprietaryName>
<NonProprietaryName>Fluocinolone Acetonide</NonProprietaryName>
<DosageFormName>OIL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181030</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210539</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>FLUOCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>.11</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181030</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluocinolone acetonide topical oil, 0.01% is a low to medium potency corticosteroid indicated. In adult patients for the treatment of psoriasis of the scalp (Scalp Oil).</IndicationAndUsage>
<Description>Fluocinolone Acetonide Topical Oil, 0.01% contains fluocinolone acetonide, USP (6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene) bis-(oxy)]-pregna-1,4-diene-3,20-dione, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide Topical Oil, 0.01%, fluocinolone acetonide for use as body oil for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older and as fluocinolone acetonide oil, 0.01% for chronic eczematous external otitis. Chemically, fluocinolone acetonide, USP is C24H30F2O6. It has the following structural formula. Fluocinolone acetonide, USP in Fluocinolone Acetonide Topical Oil, 0.01% has a molecular weight of 452.49. It is a white to almost white, crystalline powder and melts at about 270°C with decomposition; practically insoluble in water and heptane, soluble in methanol, anhydrous ethanol and acetone, slightly soluble in ether and chloroform. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide, USP in a blend of oils, which contains anhydrous citric acid, isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic.</Description>
</NDC>
<NDC>
<NDCCode>68462-513-89</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (68462-513-89) > 118 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>68462-0513-89</NDC11Code>
<ProductNDC>68462-513</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desonide</ProprietaryName>
<NonProprietaryName>Desonide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170926</StartMarketingDate>
<EndMarketingDate>20230501</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209494</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>DESONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170926</StartMarketingDatePackage>
<EndMarketingDatePackage>20230501</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68462-591-89</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (68462-591-89) / 118.28 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>68462-0591-89</NDC11Code>
<ProductNDC>68462-591</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinolone Acetonide</ProprietaryName>
<NonProprietaryName>Fluocinolone Acetonide</NonProprietaryName>
<DosageFormName>OIL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210556</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>FLUOCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>.11</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluocinolone acetonide body oil is a corticosteroid indicated for the topical treatment of: 1 atopic dermatitis in adults (1), 2 moderate to severe atopic dermatitis in pediatric patients 3 months of age and older (1).</IndicationAndUsage>
<Description>Fluocinolone Acetonide body oil, 0.01% (fluocinolone acetonide), topical oil, 0.01% contains fluocinolone acetonide, USP (6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17 [(1-methylethylidene)bis-(oxy)]-pregna-1,4-diene-3,20-dione, a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide, USP is C24 H30 F2 O6. It has the following structural formula. Fluocinolone acetonide, USP has a molecular weight of 452.49. It is a white to almost white, crystalline powder and melts at 270°C with decomposition; practically insoluble in water and heptane; soluble in methanol, anhydrous ethanol and acetone; slightly soluble in ether and chloroform. Each gram of Fluocinolone Acetonide Topical Oil contains approximately 0.11 mg of fluocinolone acetonide, USP in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2, refined peanut oil. Fluocinolone Acetonide body oil is formulated with 48% refined peanut oil. The bulk refined peanut oil, used in fluocinolone acetonide body oil is heated at 246°C (475°F) for at least 15 minutes. The refined peanut oil used in fluocinolone acetonide body oil is routinely tested for peanut proteins through amino acid analysis; the quantity of amino acids is below 0.5 parts per million (ppm).</Description>
</NDC>
<NDC>
<NDCCode>68462-220-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (68462-220-01) </PackageDescription>
<NDC11Code>68462-0220-01</NDC11Code>
<ProductNDC>68462-220</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079139</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89.</Description>
</NDC>
<NDC>
<NDCCode>68462-220-11</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (68462-220-11) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0220-11</NDC11Code>
<ProductNDC>68462-220</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079139</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89.</Description>
</NDC>
<NDC>
<NDCCode>68462-221-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (68462-221-01) </PackageDescription>
<NDC11Code>68462-0221-01</NDC11Code>
<ProductNDC>68462-221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079139</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89.</Description>
</NDC>
<NDC>
<NDCCode>68462-221-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (68462-221-10) </PackageDescription>
<NDC11Code>68462-0221-10</NDC11Code>
<ProductNDC>68462-221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079139</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89.</Description>
</NDC>
<NDC>
<NDCCode>68462-221-11</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68462-221-11) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0221-11</NDC11Code>
<ProductNDC>68462-221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079139</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89.</Description>
</NDC>
<NDC>
<NDCCode>68462-222-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (68462-222-01) </PackageDescription>
<NDC11Code>68462-0222-01</NDC11Code>
<ProductNDC>68462-222</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079139</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89.</Description>
</NDC>
<NDC>
<NDCCode>68462-222-11</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (68462-222-11) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0222-11</NDC11Code>
<ProductNDC>68462-222</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079139</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies (14)], 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89.</Description>
</NDC>
<NDC>
<NDCCode>68462-223-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-223-01) </PackageDescription>
<NDC11Code>68462-0223-01</NDC11Code>
<ProductNDC>68462-223</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091544</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium carbonate extended-release tablets are indicated in the treatment of manic episodes of Bipolar Disorder. Bipolar Disorder, Manic (DSM-IV) is equivalent to Manic Depressive illness, Manic, in the older DSM-II terminology. Lithium carbonate extended-release tablets are also indicated as a maintenance treatment for individuals with a diagnosis of Bipolar Disorder. Maintenance therapy reduces the frequency of manic episodes and diminishes the intensity of those episodes which may occur. Typical symptoms of mania include pressure of speech, motor hyperactivity, reduced need for sleep, flight of ideas, grandiosity, elation, poor judgment, aggressiveness, and possibly hostility. When given to a patient experiencing a manic episode, lithium may produce a normalization of symptomatology within 1 to 3 weeks.</IndicationAndUsage>
<Description>Lithium Carbonate Extended-Release Tablets, USP contain lithium carbonate, USP a white crystalline powder with molecular formula Li2CO3 and molecular weight 73.89. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Each light pink to pink colored circular, biconvex, coated, extended-release tablet contains 300 mg of lithium carbonate, USP. This slowly dissolving film-coated tablet is designed to give lower serum lithium peak concentrations than obtained with conventional oral lithium dosage forms. Inactive ingredients consist of sodium chloride, povidone, sorbitol, sodium starch glycolate, sodium lauryl sulfate, calcium stearate, hypromellose, titanium dioxide, polyethylene glycol and iron oxide red. Product meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>68462-224-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (68462-224-01) </PackageDescription>
<NDC11Code>68462-0224-01</NDC11Code>
<ProductNDC>68462-224</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091616</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>450</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium Carbonate Extended-Release Tablets are indicated in the treatment of manic episodes of manic-depressive illness. Maintenance therapy prevents or diminishes the intensity of subsequent episodes in those manic-depressive patients with a history of mania. Typical symptoms of mania include pressure of speech, motor hyperactivity, reduced need for sleep, flight of ideas, grandiosity, elation, poor judgment, aggressiveness and possibly hostility. When given to a patient experiencing a manic episode, Lithium Carbonate Extended-Release Tablets may produce a normalization of symptomatology within 1 to 3 weeks.</IndicationAndUsage>
<Description>Lithium Carbonate Extended-Release Tablets USP, contain lithium carbonate USP, a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89 g/mol. Lithium is an element of the alkali‑metal group with atomic number 3, atomic weight 6.94 and an emission line at 671 nm on the flame photometer. Lithium Carbonate Extended-Release Tablets USP. Each off-white to pale yellow, circular, beveled edged, biconvex uncoated tablets with ‘224’ debossed on one side, ‘G’ and a break line debossed on the other side, contains lithium carbonate, 450 mg. Inactive ingredients consist of ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, sodium alginate, sodium starch glycolate and talc. Product meets USP Dissolution Test 2. Lithium Carbonate Extended-Release Tablets USP, 450 mg are designed to release a portion of the dose initially and the remainder gradually; the release pattern of the controlled release tablets reduces the variability in lithium blood levels seen with the immediate release dosage forms.</Description>
</NDC>
<NDC>
<NDCCode>68462-224-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (68462-224-10) </PackageDescription>
<NDC11Code>68462-0224-10</NDC11Code>
<ProductNDC>68462-224</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091616</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>450</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium Carbonate Extended-Release Tablets are indicated in the treatment of manic episodes of manic-depressive illness. Maintenance therapy prevents or diminishes the intensity of subsequent episodes in those manic-depressive patients with a history of mania. Typical symptoms of mania include pressure of speech, motor hyperactivity, reduced need for sleep, flight of ideas, grandiosity, elation, poor judgment, aggressiveness and possibly hostility. When given to a patient experiencing a manic episode, Lithium Carbonate Extended-Release Tablets may produce a normalization of symptomatology within 1 to 3 weeks.</IndicationAndUsage>
<Description>Lithium Carbonate Extended-Release Tablets USP, contain lithium carbonate USP, a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89 g/mol. Lithium is an element of the alkali‑metal group with atomic number 3, atomic weight 6.94 and an emission line at 671 nm on the flame photometer. Lithium Carbonate Extended-Release Tablets USP. Each off-white to pale yellow, circular, beveled edged, biconvex uncoated tablets with ‘224’ debossed on one side, ‘G’ and a break line debossed on the other side, contains lithium carbonate, 450 mg. Inactive ingredients consist of ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, sodium alginate, sodium starch glycolate and talc. Product meets USP Dissolution Test 2. Lithium Carbonate Extended-Release Tablets USP, 450 mg are designed to release a portion of the dose initially and the remainder gradually; the release pattern of the controlled release tablets reduces the variability in lithium blood levels seen with the immediate release dosage forms.</Description>
</NDC>
<NDC>
<NDCCode>68462-224-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (68462-224-30) </PackageDescription>
<NDC11Code>68462-0224-30</NDC11Code>
<ProductNDC>68462-224</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091616</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>450</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium Carbonate Extended-Release Tablets are indicated in the treatment of manic episodes of manic-depressive illness. Maintenance therapy prevents or diminishes the intensity of subsequent episodes in those manic-depressive patients with a history of mania. Typical symptoms of mania include pressure of speech, motor hyperactivity, reduced need for sleep, flight of ideas, grandiosity, elation, poor judgment, aggressiveness and possibly hostility. When given to a patient experiencing a manic episode, Lithium Carbonate Extended-Release Tablets may produce a normalization of symptomatology within 1 to 3 weeks.</IndicationAndUsage>
<Description>Lithium Carbonate Extended-Release Tablets USP, contain lithium carbonate USP, a white, crystalline powder with molecular formula Li2CO3 and molecular weight 73.89 g/mol. Lithium is an element of the alkali‑metal group with atomic number 3, atomic weight 6.94 and an emission line at 671 nm on the flame photometer. Lithium Carbonate Extended-Release Tablets USP. Each off-white to pale yellow, circular, beveled edged, biconvex uncoated tablets with ‘224’ debossed on one side, ‘G’ and a break line debossed on the other side, contains lithium carbonate, 450 mg. Inactive ingredients consist of ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, sodium alginate, sodium starch glycolate and talc. Product meets USP Dissolution Test 2. Lithium Carbonate Extended-Release Tablets USP, 450 mg are designed to release a portion of the dose initially and the remainder gradually; the release pattern of the controlled release tablets reduces the variability in lithium blood levels seen with the immediate release dosage forms.</Description>
</NDC>
<NDC>
<NDCCode>68462-777-35</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (68462-777-35) / 10 mL in 1 VIAL (68462-777-10) </PackageDescription>
<NDC11Code>68462-0777-35</NDC11Code>
<ProductNDC>68462-777</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20251008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-778-55</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (68462-778-55) / 20 mL in 1 VIAL (68462-778-20) </PackageDescription>
<NDC11Code>68462-0778-55</NDC11Code>
<ProductNDC>68462-778</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20251008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-778-74</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68462-778-74) / 20 mL in 1 VIAL (68462-778-20) </PackageDescription>
<NDC11Code>68462-0778-74</NDC11Code>
<ProductNDC>68462-778</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20251008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-793-55</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (68462-793-55) / 20 mL in 1 VIAL (68462-793-20) </PackageDescription>
<NDC11Code>68462-0793-55</NDC11Code>
<ProductNDC>68462-793</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20250807</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-793-74</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68462-793-74) / 20 mL in 1 VIAL (68462-793-20) </PackageDescription>
<NDC11Code>68462-0793-74</NDC11Code>
<ProductNDC>68462-793</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20250807</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-794-62</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (68462-794-62) / 30 mL in 1 VIAL (68462-794-30) </PackageDescription>
<NDC11Code>68462-0794-62</NDC11Code>
<ProductNDC>68462-794</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20250807</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-794-84</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68462-794-84) / 30 mL in 1 VIAL (68462-794-30) </PackageDescription>
<NDC11Code>68462-0794-84</NDC11Code>
<ProductNDC>68462-794</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20250807</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-795-55</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (68462-795-55) / 20 mL in 1 VIAL (68462-795-20) </PackageDescription>
<NDC11Code>68462-0795-55</NDC11Code>
<ProductNDC>68462-795</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20250807</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>0078-1224-61</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0078-1224-61) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00078-1224-61</NDC11Code>
<ProductNDC>0078-1224</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Locametz</ProprietaryName>
<NonProprietaryName>Kit For The Preparation Of Gallium Ga 68 Gozetotide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220323</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215841</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>GOZETOTIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LOCAMETZ, after radiolabeling with gallium-68, is indicated for positron emission tomography (PET) of prostate-specific membrane antigen (PSMA)-positive lesions in men with prostate cancer: 1 with suspected metastasis who are candidates for initial definitive therapy., 2 with suspected recurrence based on elevated serum prostate-specific antigen (PSA) level., 3 for selection of patients who are indicated for PSMA-directed therapy as described in the prescribing information of the therapeutic products.</IndicationAndUsage>
<Description>LOCAMETZ (kit for the preparation of gallium Ga 68 gozetotide injection) is a sterile, radioactive diagnostic agent for intravenous administration after radiolabeling. Each vial contains 25 micrograms of gozetotide, 1 mg gentisic acid, 78 mg of sodium acetate trihydrate, and 40 mg sodium chloride. Gozetotide is also known as PSMA-11. After reconstitution and radiolabeling of LOCAMETZ, the vial contains gallium Ga 68 gozetotide injection at a radioactivity of up to 2,590 MBq (70 mCi) in up to 10 mL at calibration date and time. The vial also contains hydrochloric acid derived from the gallium-68 chloride solution. Gallium Ga 68 gozetotide injection has a pH between 3.2 to 6.5. Gallium Ga 68 gozetotide is a urea based peptidomimetic that has a covalently bound chelator (HBED-CC). The peptide has amino acid sequence OH-Glu-CO-Lys(Ahx-CC-HBED)-OH. Gallium Ga 68 gozetotide has a molecular weight of 1011.91 g/mol. The chemical structure is shown in Figure 3. Figure 3. Chemical Structure of Gallium Ga 68 Gozetotide.</Description>
</NDC>
<NDC>
<NDCCode>0363-0041-33</NDCCode>
<PackageDescription>590 mL in 1 BOTTLE (0363-0041-33)</PackageDescription>
<NDC11Code>00363-0041-33</NDC11Code>
<ProductNDC>0363-0041</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Walgreen Nighttime</ProprietaryName>
<ProprietaryNameSuffix>Cold And Flu Relief</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide And Doxylamine Succinate Liquid</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090709</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Walgreen Company</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE</SubstanceName>
<StrengthNumber>500; 15; 6.25</StrengthNumber>
<StrengthUnit>mg/15mL; mg/15mL; mg/15mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>10122-590-02</NDCCode>
<PackageDescription>1 CANISTER in 1 CARTON (10122-590-02) / 120 AEROSOL, METERED in 1 CANISTER</PackageDescription>
<NDC11Code>10122-0590-02</NDC11Code>
<ProductNDC>10122-590</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trimbow</ProprietaryName>
<NonProprietaryName>Beclomethasone Dipropionate/formoterol Fumarate/glycopyrrolate</NonProprietaryName>
<DosageFormName>AEROSOL, METERED</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20260514</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA219622</ApplicationNumber>
<LabelerName>Chiesi USA, Inc.</LabelerName>
<SubstanceName>BECLOMETHASONE DIPROPIONATE; FORMOTEROL FUMARATE; GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>172; 4.9; 10.6</StrengthNumber>
<StrengthUnit>ug/1; ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260514</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>TRIMBOW is indicated for the maintenance treatment of asthma in adult patients aged 18 years and older. Limitations of Use. TRIMBOW is NOT indicated for relief of acute bronchospasm [see Warnings and Precautions (5.2)].</IndicationAndUsage>
<Description>TRIMBOW (beclomethasone dipropionate, formoterol fumarate and glycopyrrolate) Inhalation Aerosol is a pressurized metered-dose inhaler that delivers a combination of beclomethasone dipropionate [an inhaled corticosteroid (ICS)], formoterol fumarate [an inhaled long-acting beta2-adrenergic agonist (a LABA)] and glycopyrrolate (an anticholinergic) for oral inhalation. Beclomethasone dipropionate, an inhaled corticosteroid [ICS], has the chemical name. [2-[(8S,9R,10S,11S,13S,14S,16S,17R)-9-chloro-11-hydroxy-10,13,16-trimethyl-3-oxo-17-propanoyloxy-6,7,8,11,12,14,15,16-octahydrocyclopenta[a]phenanthren-17-yl]-2-oxoethyl] propanoate. Beclomethasone dipropionate is a white to creamy white, odorless powder, insoluble in water, freely soluble in acetone, and sparingly soluble in alcohol, with a molecular weight of 521.04218 g/mol, and the molecular formula is C28H37ClO7. The structural formula is as follows:. Formoterol fumarate, a long-acting β2 agonist has the chemical name (E)-but-2-enedioic acid; N-[2-hydroxy-5-[(1R)-1-hydroxy-2-[[(1R)-2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]-formamide dihydrate. Formoterol fumarate is a powder that is slightly soluble in water. Formoterol fumarate has a molecular weight of 840.91 g/mol, and the molecular formula is C42H52N4O12. The structural formula is as follows:. Formoterol fumarate contains two chiral centers and consists of a single enantiomeric pair (a racemate of R,R and S,S) . Glycopyrrolate is a quarternary ammonium bromide salt with the following chemical name: [RS-]-3-[(SR)-(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl-Pyrrolidinium bromide. Two asymmetric atoms of carbon are present in the molecule: Glycopyrronium bromide is represented by the (R,S)-(S,R) racemic pair of enantiomers, corresponding to the threo diastereoisomeric structure. Glycopyrrolate is a powder that is freely soluble in water. Glycopyrrolate has a molecular weight of 398.33 g/mol, and the molecular formula is C19H28BrNO3. The structural formula is as follows. Glycopyrrolate contains two chiral centers and is a racemate of a 1;1 mixture of the R,S and S,R diastereomers. The active moiety, glycopyrronium, is the positively charged ion of glycopyrrolate. TRIMBOW 86 mcg/4.9 mcg/10.6 mcg and TRIMBOW 172 mcg/4.9 mcg/10.6 mcg are formulated as a hydrofluoroalkane (HFA 134a) propelled pressurized, metered-dose inhalers, each containing 120 actuations. The canister is supplied with a grey plastic actuator with an integrated dose counter mechanism and mouthpiece, and a red cap (TRIMBOW 86 mcg/4.9 mcg/10.6 mcg) or a green cap (TRIMBOW 172 mcg/4.9 mcg/10.6 mcg). As a solution, TRIMBOW does not need to be shaken before use. TRIMBOW should be “primed” by actuating 2 times prior to using the first dose from a new canister. If the inhaler has not been used for 30 days or longer, re-prime the inhaler [see How Supplied/Storage and Handling (16)]. After priming, each actuation meters 100 or 200 mcg of beclomethasone dipropionate, 6.0 mcg of formoterol fumarate (equivalent to 5.7 mcg of formoterol fumarate anhydrous), and 12.5 mcg of glycopyrrolate (equivalent to 10 mcg of glycopyrronium) in 73.8 mg of solution from the valve and delivers 86 or 172 mcg of beclomethasone dipropionate, 4.9 mcg of formoterol fumarate (equivalent to 4.2 mcg of formoterol fumarate anhydrous), and 10.6 mcg of glycopyrrolate (equivalent to 8.5 mcg of glycopyrronium) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as coordination of the device (metered dose inhaler [MDI]) actuation with the inhalation maneuver, inspiratory flow and peak inspiratory flow through the delivery system, which may vary in patients with asthma and other pulmonary diseases and conditions. Avoid spraying in the eyes or face while using TRIMBOW. TRIMBOW contains dehydrated alcohol (18% v/v), HFA 134a, and hydrochloric acid as excipients in the formulation.</Description>
</NDC>
<NDC>
<NDCCode>10135-590-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (10135-590-01)</PackageDescription>
<NDC11Code>10135-0590-01</NDC11Code>
<ProductNDC>10135-590</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pilocarpine Hydrochloride</ProprietaryName>
<NonProprietaryName>Pilocarpine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077220</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>PILOCARPINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Agonists [MoA],Cholinergic Muscarinic Agonists [MoA],Cholinergic Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Pilocarpine hydrochloride tablets, USP are indicated for 1) the treatment of symptoms of dry mouth from salivary gland hypofunction caused by radiotherapy for cancer of the head and neck; and 2) the treatment of symptoms of dry mouth in patients with Sjogren’s syndrome.</IndicationAndUsage>
<Description>Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride, USP is a hygroscopic, odorless, bitter tasting white crystal or powder, which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, USP with a chemical name of (3S-cis)-2(3H)-Furanone, 3-ethyldihydro-4-[(1-methyl-1H-imidazol-5-yl) methyl] monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet’s film coating is: polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Each 7.5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet’s film coating is: FD&C Blue #2/Indigo Carmine aluminum lake, polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc.</Description>
</NDC>
<NDC>
<NDCCode>10237-590-10</NDCCode>
<PackageDescription>1020.58 kg in 1 SUPERSACK (10237-590-10) </PackageDescription>
<NDC11Code>10237-0590-10</NDC11Code>
<ProductNDC>10237-590</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19770130</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Church & Dwight Co., Inc.</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-03-14</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>30-JAN-77</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>10237-590-25</NDCCode>
<PackageDescription>22.68 kg in 1 BAG (10237-590-25) </PackageDescription>
<NDC11Code>10237-0590-25</NDC11Code>
<ProductNDC>10237-590</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19770130</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Church & Dwight Co., Inc.</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-03-14</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>30-JAN-77</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>10237-590-90</NDCCode>
<PackageDescription>90718.47 kg in 1 PACKAGE (10237-590-90) </PackageDescription>
<NDC11Code>10237-0590-90</NDC11Code>
<ProductNDC>10237-590</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19770130</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Church & Dwight Co., Inc.</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-03-14</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>30-JAN-77</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>10544-590-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (10544-590-28)</PackageDescription>
<NDC11Code>10544-0590-28</NDC11Code>
<ProductNDC>10544-590</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100303</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide.</Description>
</NDC>
</NDCList>