{
"NDC": [
{
"NDCCode": "68462-646-93",
"PackageDescription": "2 POUCH in 1 CARTON (68462-646-93) / 1 BLISTER PACK in 1 POUCH / 1 KIT in 1 BLISTER PACK (68462-646-91) ",
"NDC11Code": "68462-0646-93",
"ProductNDC": "68462-646",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ashlyna",
"NonProprietaryName": "Levonorgestrel And Ethinyl Estradiol And Ethinyl Estradiol",
"DosageFormName": "KIT",
"StartMarketingDate": "20150223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203163",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"Status": "Active",
"LastUpdate": "2026-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150223",
"SamplePackage": "N",
"IndicationAndUsage": "Ashlynais indicated for use by females of reproductive potential to prevent pregnancy.",
"Description": "Ashlyna® (Levonorgestrel and Ethinyl Estradiol Tablets, USP 0.15 mg/0.03 mg and Ethinyl Estradiol Tablets, USP 0.01 mg) is an extended-cycle oral contraceptive consisting of 84 light blue to blue tablets each containing 0.15 mg of levonorgestrel, USP a synthetic progestogen and 0.03 mg of ethinyl estradiol, USP and 7 light yellow to yellow tablets containing 0.01 mg of ethinyl estradiol, USP. The structural formulas for the active components are. Levonorgestrel, USP. C21H28O2 MW: 312.4. Levonorgestrel, USP is chemically 18,19-Dinorpregn-4-en-20-yn-3-one, 13-ethyl-17-hydroxy-, (17α)-(-)-. Ethinyl Estradiol, USP. C20H24O2 MW: 296.4. Ethinyl Estradiol, USP is 19-Norpregna-1,3,5(10)-trien-20-yne-3,17-diol, (17α)-. Each light blue to blue tablet contains the following inactive ingredients: anhydrous lactose, D&C yellow no. 10 aluminum lake, FD&C blue no. 1 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Each light yellow to yellow tablet contains the following inactive ingredients: anhydrous lactose, D&C yellow no. 10 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polacrilin potassium, polyethylene glycol 400, polysorbate 80 and titanium dioxide."
},
{
"NDCCode": "68462-166-07",
"PackageDescription": "7 BLISTER PACK in 1 CARTON (68462-166-07) / 7 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "68462-0166-07",
"ProductNDC": "68462-166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fingolimod",
"NonProprietaryName": "Fingolimod",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207985",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "FINGOLIMOD HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220928",
"SamplePackage": "N",
"IndicationAndUsage": "Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.",
"Description": "Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod hydrochloride is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride, USP is a white to off-white powder that is freely soluble in alcohol, soluble in methanol, water and propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod Capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each 0.5 mg capsule contains 0.56 mg of fingolimod hydrochloride, USP equivalent to 0.5 mg fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: magnesium stearate and pregelatinized starch. The capsule shell contains gelatin, iron oxide yellow and titanium dioxide. The imprinting ink contains iron oxide black, potassium hydroxide and shellac."
},
{
"NDCCode": "68462-166-15",
"PackageDescription": "28 CARTON in 1 CARTON (68462-166-15) / 14 BLISTER PACK in 1 CARTON (68462-166-41) / 14 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "68462-0166-15",
"ProductNDC": "68462-166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fingolimod",
"NonProprietaryName": "Fingolimod",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207985",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "FINGOLIMOD HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220928",
"SamplePackage": "N",
"IndicationAndUsage": "Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.",
"Description": "Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod hydrochloride is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride, USP is a white to off-white powder that is freely soluble in alcohol, soluble in methanol, water and propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod Capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each 0.5 mg capsule contains 0.56 mg of fingolimod hydrochloride, USP equivalent to 0.5 mg fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: magnesium stearate and pregelatinized starch. The capsule shell contains gelatin, iron oxide yellow and titanium dioxide. The imprinting ink contains iron oxide black, potassium hydroxide and shellac."
},
{
"NDCCode": "68462-166-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (68462-166-30) ",
"NDC11Code": "68462-0166-30",
"ProductNDC": "68462-166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fingolimod",
"NonProprietaryName": "Fingolimod",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207985",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "FINGOLIMOD HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220928",
"SamplePackage": "N",
"IndicationAndUsage": "Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.",
"Description": "Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod hydrochloride is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride, USP is a white to off-white powder that is freely soluble in alcohol, soluble in methanol, water and propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod Capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each 0.5 mg capsule contains 0.56 mg of fingolimod hydrochloride, USP equivalent to 0.5 mg fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: magnesium stearate and pregelatinized starch. The capsule shell contains gelatin, iron oxide yellow and titanium dioxide. The imprinting ink contains iron oxide black, potassium hydroxide and shellac."
},
{
"NDCCode": "68462-520-01",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-520-01) ",
"NDC11Code": "68462-0520-01",
"ProductNDC": "68462-520",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212969",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12."
},
{
"NDCCode": "68462-520-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-520-05) ",
"NDC11Code": "68462-0520-05",
"ProductNDC": "68462-520",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212969",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12."
},
{
"NDCCode": "68462-520-10",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-520-10) ",
"NDC11Code": "68462-0520-10",
"ProductNDC": "68462-520",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212969",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12."
},
{
"NDCCode": "68462-521-01",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-521-01) ",
"NDC11Code": "68462-0521-01",
"ProductNDC": "68462-521",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212969",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12."
},
{
"NDCCode": "68462-521-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-521-05) ",
"NDC11Code": "68462-0521-05",
"ProductNDC": "68462-521",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212969",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12."
},
{
"NDCCode": "68462-521-90",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-521-90) ",
"NDC11Code": "68462-0521-90",
"ProductNDC": "68462-521",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212969",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12."
},
{
"NDCCode": "68462-728-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (68462-728-25) / 5 mL in 1 VIAL, SINGLE-DOSE (68462-728-05) ",
"NDC11Code": "68462-0728-25",
"ProductNDC": "68462-728",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Phosphates",
"NonProprietaryName": "Sodium Phosphates",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220683",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, HEPTAHYDRATE",
"StrengthNumber": "276; 268",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260223",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium phosphates injection, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.",
"Description": "Sodium phosphates injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water."
},
{
"NDCCode": "68462-729-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (68462-729-25) / 15 mL in 1 VIAL, SINGLE-DOSE (68462-729-15) ",
"NDC11Code": "68462-0729-25",
"ProductNDC": "68462-729",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Phosphates",
"NonProprietaryName": "Sodium Phosphates",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220683",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, HEPTAHYDRATE",
"StrengthNumber": "276; 268",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260223",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium phosphates injection, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.",
"Description": "Sodium phosphates injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water."
},
{
"NDCCode": "68462-730-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (68462-730-25) / 50 mL in 1 VIAL, SINGLE-DOSE (68462-730-50) ",
"NDC11Code": "68462-0730-25",
"ProductNDC": "68462-730",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Phosphates",
"NonProprietaryName": "Sodium Phosphates",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220683",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, HEPTAHYDRATE",
"StrengthNumber": "276; 268",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260223",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium phosphates injection, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.",
"Description": "Sodium phosphates injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water."
},
{
"NDCCode": "68462-786-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (68462-786-25) / 5 mL in 1 VIAL, SINGLE-DOSE (68462-786-05) ",
"NDC11Code": "68462-0786-25",
"ProductNDC": "68462-786",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphates",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220373",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260312",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.",
"Description": "Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial.Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water.Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water.Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate.Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0.This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)].The osmolarity is 7.4 mOsmol/mL (calc).The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "68462-787-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (68462-787-25) / 15 mL in 1 VIAL, SINGLE-DOSE (68462-787-15) ",
"NDC11Code": "68462-0787-25",
"ProductNDC": "68462-787",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphates",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220373",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260312",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.",
"Description": "Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial.Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water.Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water.Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate.Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0.This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)].The osmolarity is 7.4 mOsmol/mL (calc).The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "68462-788-25",
"PackageDescription": "25 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (68462-788-25) / 50 mL in 1 VIAL, PHARMACY BULK PACKAGE (68462-788-50) ",
"NDC11Code": "68462-0788-25",
"ProductNDC": "68462-788",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphates",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220373",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260312",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.",
"Description": "Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial.Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water.Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water.Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate.Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0.This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)].The osmolarity is 7.4 mOsmol/mL (calc).The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "10019-646-24",
"PackageDescription": "6 BOTTLE, GLASS in 1 CARTON (10019-646-24) / 240 mL in 1 BOTTLE, GLASS (10019-646-60) ",
"NDC11Code": "10019-0646-24",
"ProductNDC": "10019-646",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Suprane",
"NonProprietaryName": "Desflurane",
"DosageFormName": "LIQUID",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19920918",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020118",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DESFLURANE",
"StrengthNumber": "240",
"StrengthUnit": "mL/240mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-10-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920918",
"SamplePackage": "N",
"IndicationAndUsage": "SUPRANE, a general anesthetic, is an inhalation agent indicated: 1 for induction and/or maintenance of anesthesia in adults (1.1), 2 for maintenance of anesthesia in pediatric patients following induction with agents other than SUPRANE and intubation. .",
"Description": "SUPRANE (desflurane, USP), a nonflammable liquid administered via vaporizer, is a general inhalation anesthetic. It is (±)1,2,2,2-tetrafluoroethyl difluoromethyl ether. Some physical constants are. Partition coefficients at 37°C. Mean Component/Gas Partition Coefficients. SUPRANE is nonflammable as defined by the requirements of International Electrotechnical Commission 601-2-13. SUPRANE is a colorless, volatile liquid below 22.8°C. Data indicate that SUPRANE is stable when stored under normal room lighting conditions according to instructions. SUPRANE is chemically stable. The only known degradation reaction is through prolonged direct contact with soda lime producing low levels of fluoroform (CHF3). The amount of CHF3 obtained is similar to that produced with MAC-equivalent doses of isoflurane. No discernible degradation occurs in the presence of strong acids. SUPRANE does not corrode stainless steel, brass, aluminum, anodized aluminum, nickel plated brass, copper, or beryllium."
},
{
"NDCCode": "10019-646-34",
"PackageDescription": "6 BOTTLE in 1 CARTON (10019-646-34) / 240 mL in 1 BOTTLE (10019-646-64) ",
"NDC11Code": "10019-0646-34",
"ProductNDC": "10019-646",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Suprane",
"NonProprietaryName": "Desflurane",
"DosageFormName": "LIQUID",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19920918",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020118",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DESFLURANE",
"StrengthNumber": "240",
"StrengthUnit": "mL/240mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19920918",
"SamplePackage": "N",
"IndicationAndUsage": "SUPRANE, a general anesthetic, is an inhalation agent indicated: 1 for induction and/or maintenance of anesthesia in adults (1.1), 2 for maintenance of anesthesia in pediatric patients following induction with agents other than SUPRANE and intubation. .",
"Description": "SUPRANE (desflurane, USP), a nonflammable liquid administered via vaporizer, is a general inhalation anesthetic. It is (±)1,2,2,2-tetrafluoroethyl difluoromethyl ether. Some physical constants are. Partition coefficients at 37°C. Mean Component/Gas Partition Coefficients. SUPRANE is nonflammable as defined by the requirements of International Electrotechnical Commission 601-2-13. SUPRANE is a colorless, volatile liquid below 22.8°C. Data indicate that SUPRANE is stable when stored under normal room lighting conditions according to instructions. SUPRANE is chemically stable. The only known degradation reaction is through prolonged direct contact with soda lime producing low levels of fluoroform (CHF3). The amount of CHF3 obtained is similar to that produced with MAC-equivalent doses of isoflurane. No discernible degradation occurs in the presence of strong acids. SUPRANE does not corrode stainless steel, brass, aluminum, anodized aluminum, nickel plated brass, copper, or beryllium."
},
{
"NDCCode": "10056-646-12",
"PackageDescription": "1 CONTAINER in 1 BOX (10056-646-12) > 12 g in 1 CONTAINER",
"NDC11Code": "10056-0646-12",
"ProductNDC": "10056-646",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Artistry Ideal Dual Foundation",
"ProprietaryNameSuffix": "Spf 18",
"NonProprietaryName": "Octinoxate, Zinc Oxide",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110414",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Access Business Group LLC",
"SubstanceName": "OCTINOXATE; ZINC OXIDE",
"StrengthNumber": "6; 2.7",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2014-02-19"
},
{
"NDCCode": "10135-646-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (10135-646-01) ",
"NDC11Code": "10135-0646-01",
"ProductNDC": "10135-646",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204989",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20180401",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin is indicated for: : 1 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy .",
"Description": "The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&C Red 40, D&C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&C Yellow 10, and FD&C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide, hypromellose, titanium dioxide and polyethylene glycol."
},
{
"NDCCode": "10135-646-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE, PLASTIC (10135-646-05) ",
"NDC11Code": "10135-0646-05",
"ProductNDC": "10135-646",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204989",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20180401",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin is indicated for: : 1 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy .",
"Description": "The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&C Red 40, D&C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&C Yellow 10, and FD&C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide, hypromellose, titanium dioxide and polyethylene glycol."
},
{
"NDCCode": "10135-646-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (10135-646-30) ",
"NDC11Code": "10135-0646-30",
"ProductNDC": "10135-646",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204989",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2021-11-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180401",
"SamplePackage": "N"
},
{
"NDCCode": "10237-646-60",
"PackageDescription": "1 TUBE in 1 CARTON (10237-646-60) > 170 g in 1 TUBE",
"NDC11Code": "10237-0646-60",
"ProductNDC": "10237-646",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Close Up",
"ProprietaryNameSuffix": "Freshening With Mouthwash",
"NonProprietaryName": "Sodium Fluoride",
"DosageFormName": "PASTE, DENTIFRICE",
"RouteName": "DENTAL",
"StartMarketingDate": "20101026",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part355",
"LabelerName": "Church & Dwight Co., Inc.",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": "2.4",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "10967-646-16",
"PackageDescription": "47 mL in 1 CONTAINER (10967-646-16)",
"NDC11Code": "10967-0646-16",
"ProductNDC": "10967-646",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Revlon Mitchum Clinical Strength Soft Solid",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly Liquid",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Revlon Consumer Products Corp",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": ".2",
"StrengthUnit": "g/mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Reduces underarm wetness."
},
{
"NDCCode": "10967-646-24",
"PackageDescription": "70 mL in 1 CONTAINER (10967-646-24)",
"NDC11Code": "10967-0646-24",
"ProductNDC": "10967-646",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Revlon Mitchum Clinical Strength Soft Solid",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly Liquid",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Revlon Consumer Products Corp",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": ".2",
"StrengthUnit": "g/mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Reduces underarm wetness."
},
{
"NDCCode": "10967-646-50",
"PackageDescription": "14 mL in 1 CONTAINER (10967-646-50)",
"NDC11Code": "10967-0646-50",
"ProductNDC": "10967-646",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Revlon Mitchum Clinical Strength Soft Solid",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly Liquid",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Revlon Consumer Products Corp",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": ".2",
"StrengthUnit": "g/mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Reduces underarm wetness."
},
{
"NDCCode": "11344-646-06",
"PackageDescription": "32 mL in 1 BOTTLE, PLASTIC (11344-646-06) ",
"NDC11Code": "11344-0646-06",
"ProductNDC": "11344-646",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140729",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Vi-Jon, LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "558",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20140729",
"SamplePackage": "N",
"IndicationAndUsage": "to decrease bacteria on the skin that could cause disease. recommended for repeated use."
},
{
"NDCCode": "11673-646-62",
"PackageDescription": "24 BLISTER PACK in 1 CARTON (11673-646-62) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "11673-0646-62",
"ProductNDC": "11673-646",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Up And Up Anti Diarrheal Anti Gas",
"NonProprietaryName": "Loperamide Hydrochloride, Simethicone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190314",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209837",
"LabelerName": "Target Corporation",
"SubstanceName": "LOPERAMIDE HYDROCHLORIDE; DIMETHICONE",
"StrengthNumber": "2; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA], Skin Barrier Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210106",
"SamplePackage": "N",
"IndicationAndUsage": "relieves symptoms of diarrhea plus bloating, pressure and cramps, commonly referred to as gas."
},
{
"NDCCode": "11673-646-89",
"PackageDescription": "18 BLISTER PACK in 1 CARTON (11673-646-89) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "11673-0646-89",
"ProductNDC": "11673-646",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Up And Up Anti Diarrheal Anti Gas",
"NonProprietaryName": "Loperamide Hydrochloride, Simethicone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190314",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209837",
"LabelerName": "Target Corporation",
"SubstanceName": "LOPERAMIDE HYDROCHLORIDE; DIMETHICONE",
"StrengthNumber": "2; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA], Skin Barrier Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190314",
"SamplePackage": "N",
"IndicationAndUsage": "relieves symptoms of diarrhea plus bloating, pressure and cramps, commonly referred to as gas."
},
{
"NDCCode": "13537-646-16",
"PackageDescription": "1 TUBE in 1 BOX (13537-646-16) > 4 g in 1 TUBE (13537-646-15)",
"NDC11Code": "13537-0646-16",
"ProductNDC": "13537-646",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika Pro Advance Lasting Long-lasting And Comfort Spf 20",
"ProprietaryNameSuffix": "(fucsia Sublime) - Pink",
"NonProprietaryName": "Octinoxate",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE",
"StrengthNumber": ".07",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68462-646-93</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (68462-646-93) / 1 BLISTER PACK in 1 POUCH / 1 KIT in 1 BLISTER PACK (68462-646-91) </PackageDescription>
<NDC11Code>68462-0646-93</NDC11Code>
<ProductNDC>68462-646</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ashlyna</ProprietaryName>
<NonProprietaryName>Levonorgestrel And Ethinyl Estradiol And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20150223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203163</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ashlynais indicated for use by females of reproductive potential to prevent pregnancy.</IndicationAndUsage>
<Description>Ashlyna® (Levonorgestrel and Ethinyl Estradiol Tablets, USP 0.15 mg/0.03 mg and Ethinyl Estradiol Tablets, USP 0.01 mg) is an extended-cycle oral contraceptive consisting of 84 light blue to blue tablets each containing 0.15 mg of levonorgestrel, USP a synthetic progestogen and 0.03 mg of ethinyl estradiol, USP and 7 light yellow to yellow tablets containing 0.01 mg of ethinyl estradiol, USP. The structural formulas for the active components are. Levonorgestrel, USP. C21H28O2 MW: 312.4. Levonorgestrel, USP is chemically 18,19-Dinorpregn-4-en-20-yn-3-one, 13-ethyl-17-hydroxy-, (17α)-(-)-. Ethinyl Estradiol, USP. C20H24O2 MW: 296.4. Ethinyl Estradiol, USP is 19-Norpregna-1,3,5(10)-trien-20-yne-3,17-diol, (17α)-. Each light blue to blue tablet contains the following inactive ingredients: anhydrous lactose, D&C yellow no. 10 aluminum lake, FD&C blue no. 1 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Each light yellow to yellow tablet contains the following inactive ingredients: anhydrous lactose, D&C yellow no. 10 aluminum lake, FD&C yellow no. 6 aluminum lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polacrilin potassium, polyethylene glycol 400, polysorbate 80 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68462-166-07</NDCCode>
<PackageDescription>7 BLISTER PACK in 1 CARTON (68462-166-07) / 7 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0166-07</NDC11Code>
<ProductNDC>68462-166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fingolimod</ProprietaryName>
<NonProprietaryName>Fingolimod</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207985</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220928</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
<Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod hydrochloride is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride, USP is a white to off-white powder that is freely soluble in alcohol, soluble in methanol, water and propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod Capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each 0.5 mg capsule contains 0.56 mg of fingolimod hydrochloride, USP equivalent to 0.5 mg fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: magnesium stearate and pregelatinized starch. The capsule shell contains gelatin, iron oxide yellow and titanium dioxide. The imprinting ink contains iron oxide black, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-166-15</NDCCode>
<PackageDescription>28 CARTON in 1 CARTON (68462-166-15) / 14 BLISTER PACK in 1 CARTON (68462-166-41) / 14 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0166-15</NDC11Code>
<ProductNDC>68462-166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fingolimod</ProprietaryName>
<NonProprietaryName>Fingolimod</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207985</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220928</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
<Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod hydrochloride is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride, USP is a white to off-white powder that is freely soluble in alcohol, soluble in methanol, water and propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod Capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each 0.5 mg capsule contains 0.56 mg of fingolimod hydrochloride, USP equivalent to 0.5 mg fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: magnesium stearate and pregelatinized starch. The capsule shell contains gelatin, iron oxide yellow and titanium dioxide. The imprinting ink contains iron oxide black, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-166-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (68462-166-30) </PackageDescription>
<NDC11Code>68462-0166-30</NDC11Code>
<ProductNDC>68462-166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fingolimod</ProprietaryName>
<NonProprietaryName>Fingolimod</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207985</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220928</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
<Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod hydrochloride is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride, USP is a white to off-white powder that is freely soluble in alcohol, soluble in methanol, water and propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod Capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each 0.5 mg capsule contains 0.56 mg of fingolimod hydrochloride, USP equivalent to 0.5 mg fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: magnesium stearate and pregelatinized starch. The capsule shell contains gelatin, iron oxide yellow and titanium dioxide. The imprinting ink contains iron oxide black, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-520-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-520-01) </PackageDescription>
<NDC11Code>68462-0520-01</NDC11Code>
<ProductNDC>68462-520</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212969</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12.</Description>
</NDC>
<NDC>
<NDCCode>68462-520-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-520-05) </PackageDescription>
<NDC11Code>68462-0520-05</NDC11Code>
<ProductNDC>68462-520</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212969</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12.</Description>
</NDC>
<NDC>
<NDCCode>68462-520-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-520-10) </PackageDescription>
<NDC11Code>68462-0520-10</NDC11Code>
<ProductNDC>68462-520</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212969</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12.</Description>
</NDC>
<NDC>
<NDCCode>68462-521-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-521-01) </PackageDescription>
<NDC11Code>68462-0521-01</NDC11Code>
<ProductNDC>68462-521</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212969</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12.</Description>
</NDC>
<NDC>
<NDCCode>68462-521-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-521-05) </PackageDescription>
<NDC11Code>68462-0521-05</NDC11Code>
<ProductNDC>68462-521</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212969</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12.</Description>
</NDC>
<NDC>
<NDCCode>68462-521-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-521-90) </PackageDescription>
<NDC11Code>68462-0521-90</NDC11Code>
<ProductNDC>68462-521</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212969</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets, USP contains the biguanide antihyperglycemic agent metformin in the form of monohydrochloride salt. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown. Metformin hydrochloride is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62 g/mol. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 2.8 and 11.5 at 32°C. The pH of a 5% aqueous solution of metformin hydrochloride is 6 to 7. Metformin Hydrochloride Extended-Release Tablets, USP contain 500 mg or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. Each 500 mg and 1,000 mg tablet contains ammonio methacrylate copolymer dispersion type A, ammonio methacrylate copolymer dispersion type B, hypromellose, magnesium stearate, povidone K 30, talc, titanium dioxide, and triethyl citrate. The tablets are imprinted using a water-soluble black ink which contains shellac, black iron oxide, propylene glycol and ammonium hydroxide. Meets USP Dissolution Test 12.</Description>
</NDC>
<NDC>
<NDCCode>68462-728-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (68462-728-25) / 5 mL in 1 VIAL, SINGLE-DOSE (68462-728-05) </PackageDescription>
<NDC11Code>68462-0728-25</NDC11Code>
<ProductNDC>68462-728</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Phosphates</ProprietaryName>
<NonProprietaryName>Sodium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220683</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, HEPTAHYDRATE</SubstanceName>
<StrengthNumber>276; 268</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium phosphates injection, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.</IndicationAndUsage>
<Description>Sodium phosphates injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>68462-729-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (68462-729-25) / 15 mL in 1 VIAL, SINGLE-DOSE (68462-729-15) </PackageDescription>
<NDC11Code>68462-0729-25</NDC11Code>
<ProductNDC>68462-729</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Phosphates</ProprietaryName>
<NonProprietaryName>Sodium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220683</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, HEPTAHYDRATE</SubstanceName>
<StrengthNumber>276; 268</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium phosphates injection, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.</IndicationAndUsage>
<Description>Sodium phosphates injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>68462-730-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (68462-730-25) / 50 mL in 1 VIAL, SINGLE-DOSE (68462-730-50) </PackageDescription>
<NDC11Code>68462-0730-25</NDC11Code>
<ProductNDC>68462-730</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Phosphates</ProprietaryName>
<NonProprietaryName>Sodium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220683</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, HEPTAHYDRATE</SubstanceName>
<StrengthNumber>276; 268</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium phosphates injection, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.</IndicationAndUsage>
<Description>Sodium phosphates injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>68462-786-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (68462-786-25) / 5 mL in 1 VIAL, SINGLE-DOSE (68462-786-05) </PackageDescription>
<NDC11Code>68462-0786-25</NDC11Code>
<ProductNDC>68462-786</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220373</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.</IndicationAndUsage>
<Description>Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial.Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water.Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water.Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate.Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0.This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)].The osmolarity is 7.4 mOsmol/mL (calc).The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>68462-787-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (68462-787-25) / 15 mL in 1 VIAL, SINGLE-DOSE (68462-787-15) </PackageDescription>
<NDC11Code>68462-0787-25</NDC11Code>
<ProductNDC>68462-787</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220373</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.</IndicationAndUsage>
<Description>Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial.Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water.Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water.Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate.Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0.This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)].The osmolarity is 7.4 mOsmol/mL (calc).The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>68462-788-25</NDCCode>
<PackageDescription>25 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (68462-788-25) / 50 mL in 1 VIAL, PHARMACY BULK PACKAGE (68462-788-50) </PackageDescription>
<NDC11Code>68462-0788-25</NDC11Code>
<ProductNDC>68462-788</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220373</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.</IndicationAndUsage>
<Description>Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial.Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water.Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water.Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate.Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0.This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)].The osmolarity is 7.4 mOsmol/mL (calc).The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>10019-646-24</NDCCode>
<PackageDescription>6 BOTTLE, GLASS in 1 CARTON (10019-646-24) / 240 mL in 1 BOTTLE, GLASS (10019-646-60) </PackageDescription>
<NDC11Code>10019-0646-24</NDC11Code>
<ProductNDC>10019-646</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Suprane</ProprietaryName>
<NonProprietaryName>Desflurane</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19920918</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020118</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DESFLURANE</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mL/240mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920918</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SUPRANE, a general anesthetic, is an inhalation agent indicated: 1 for induction and/or maintenance of anesthesia in adults (1.1), 2 for maintenance of anesthesia in pediatric patients following induction with agents other than SUPRANE and intubation. .</IndicationAndUsage>
<Description>SUPRANE (desflurane, USP), a nonflammable liquid administered via vaporizer, is a general inhalation anesthetic. It is (±)1,2,2,2-tetrafluoroethyl difluoromethyl ether. Some physical constants are. Partition coefficients at 37°C. Mean Component/Gas Partition Coefficients. SUPRANE is nonflammable as defined by the requirements of International Electrotechnical Commission 601-2-13. SUPRANE is a colorless, volatile liquid below 22.8°C. Data indicate that SUPRANE is stable when stored under normal room lighting conditions according to instructions. SUPRANE is chemically stable. The only known degradation reaction is through prolonged direct contact with soda lime producing low levels of fluoroform (CHF3). The amount of CHF3 obtained is similar to that produced with MAC-equivalent doses of isoflurane. No discernible degradation occurs in the presence of strong acids. SUPRANE does not corrode stainless steel, brass, aluminum, anodized aluminum, nickel plated brass, copper, or beryllium.</Description>
</NDC>
<NDC>
<NDCCode>10019-646-34</NDCCode>
<PackageDescription>6 BOTTLE in 1 CARTON (10019-646-34) / 240 mL in 1 BOTTLE (10019-646-64) </PackageDescription>
<NDC11Code>10019-0646-34</NDC11Code>
<ProductNDC>10019-646</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Suprane</ProprietaryName>
<NonProprietaryName>Desflurane</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19920918</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020118</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DESFLURANE</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mL/240mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920918</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SUPRANE, a general anesthetic, is an inhalation agent indicated: 1 for induction and/or maintenance of anesthesia in adults (1.1), 2 for maintenance of anesthesia in pediatric patients following induction with agents other than SUPRANE and intubation. .</IndicationAndUsage>
<Description>SUPRANE (desflurane, USP), a nonflammable liquid administered via vaporizer, is a general inhalation anesthetic. It is (±)1,2,2,2-tetrafluoroethyl difluoromethyl ether. Some physical constants are. Partition coefficients at 37°C. Mean Component/Gas Partition Coefficients. SUPRANE is nonflammable as defined by the requirements of International Electrotechnical Commission 601-2-13. SUPRANE is a colorless, volatile liquid below 22.8°C. Data indicate that SUPRANE is stable when stored under normal room lighting conditions according to instructions. SUPRANE is chemically stable. The only known degradation reaction is through prolonged direct contact with soda lime producing low levels of fluoroform (CHF3). The amount of CHF3 obtained is similar to that produced with MAC-equivalent doses of isoflurane. No discernible degradation occurs in the presence of strong acids. SUPRANE does not corrode stainless steel, brass, aluminum, anodized aluminum, nickel plated brass, copper, or beryllium.</Description>
</NDC>
<NDC>
<NDCCode>10056-646-12</NDCCode>
<PackageDescription>1 CONTAINER in 1 BOX (10056-646-12) > 12 g in 1 CONTAINER</PackageDescription>
<NDC11Code>10056-0646-12</NDC11Code>
<ProductNDC>10056-646</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Artistry Ideal Dual Foundation</ProprietaryName>
<ProprietaryNameSuffix>Spf 18</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Zinc Oxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110414</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Access Business Group LLC</LabelerName>
<SubstanceName>OCTINOXATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>6; 2.7</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>10135-646-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (10135-646-01) </PackageDescription>
<NDC11Code>10135-0646-01</NDC11Code>
<ProductNDC>10135-646</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204989</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin is indicated for: : 1 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy .</IndicationAndUsage>
<Description>The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&C Red 40, D&C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&C Yellow 10, and FD&C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide, hypromellose, titanium dioxide and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>10135-646-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE, PLASTIC (10135-646-05) </PackageDescription>
<NDC11Code>10135-0646-05</NDC11Code>
<ProductNDC>10135-646</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204989</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin is indicated for: : 1 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy .</IndicationAndUsage>
<Description>The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&C Red 40, D&C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&C Yellow 10, and FD&C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide, hypromellose, titanium dioxide and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>10135-646-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (10135-646-30) </PackageDescription>
<NDC11Code>10135-0646-30</NDC11Code>
<ProductNDC>10135-646</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204989</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-11-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>10237-646-60</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (10237-646-60) > 170 g in 1 TUBE</PackageDescription>
<NDC11Code>10237-0646-60</NDC11Code>
<ProductNDC>10237-646</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Close Up</ProprietaryName>
<ProprietaryNameSuffix>Freshening With Mouthwash</ProprietaryNameSuffix>
<NonProprietaryName>Sodium Fluoride</NonProprietaryName>
<DosageFormName>PASTE, DENTIFRICE</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20101026</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part355</ApplicationNumber>
<LabelerName>Church & Dwight Co., Inc.</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>2.4</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>10967-646-16</NDCCode>
<PackageDescription>47 mL in 1 CONTAINER (10967-646-16)</PackageDescription>
<NDC11Code>10967-0646-16</NDC11Code>
<ProductNDC>10967-646</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Revlon Mitchum Clinical Strength Soft Solid</ProprietaryName>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly Liquid</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Revlon Consumer Products Corp</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Reduces underarm wetness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10967-646-24</NDCCode>
<PackageDescription>70 mL in 1 CONTAINER (10967-646-24)</PackageDescription>
<NDC11Code>10967-0646-24</NDC11Code>
<ProductNDC>10967-646</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Revlon Mitchum Clinical Strength Soft Solid</ProprietaryName>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly Liquid</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Revlon Consumer Products Corp</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Reduces underarm wetness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10967-646-50</NDCCode>
<PackageDescription>14 mL in 1 CONTAINER (10967-646-50)</PackageDescription>
<NDC11Code>10967-0646-50</NDC11Code>
<ProductNDC>10967-646</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Revlon Mitchum Clinical Strength Soft Solid</ProprietaryName>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly Liquid</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Revlon Consumer Products Corp</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Reduces underarm wetness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11344-646-06</NDCCode>
<PackageDescription>32 mL in 1 BOTTLE, PLASTIC (11344-646-06) </PackageDescription>
<NDC11Code>11344-0646-06</NDC11Code>
<ProductNDC>11344-646</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140729</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Vi-Jon, LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>558</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>to decrease bacteria on the skin that could cause disease. recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11673-646-62</NDCCode>
<PackageDescription>24 BLISTER PACK in 1 CARTON (11673-646-62) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11673-0646-62</NDC11Code>
<ProductNDC>11673-646</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Up And Up Anti Diarrheal Anti Gas</ProprietaryName>
<NonProprietaryName>Loperamide Hydrochloride, Simethicone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190314</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209837</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<SubstanceName>LOPERAMIDE HYDROCHLORIDE; DIMETHICONE</SubstanceName>
<StrengthNumber>2; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA], Skin Barrier Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves symptoms of diarrhea plus bloating, pressure and cramps, commonly referred to as gas.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11673-646-89</NDCCode>
<PackageDescription>18 BLISTER PACK in 1 CARTON (11673-646-89) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11673-0646-89</NDC11Code>
<ProductNDC>11673-646</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Up And Up Anti Diarrheal Anti Gas</ProprietaryName>
<NonProprietaryName>Loperamide Hydrochloride, Simethicone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190314</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209837</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<SubstanceName>LOPERAMIDE HYDROCHLORIDE; DIMETHICONE</SubstanceName>
<StrengthNumber>2; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA], Skin Barrier Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190314</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves symptoms of diarrhea plus bloating, pressure and cramps, commonly referred to as gas.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13537-646-16</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-646-16) > 4 g in 1 TUBE (13537-646-15)</PackageDescription>
<NDC11Code>13537-0646-16</NDC11Code>
<ProductNDC>13537-646</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika Pro Advance Lasting Long-lasting And Comfort Spf 20</ProprietaryName>
<ProprietaryNameSuffix>(fucsia Sublime) - Pink</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE</SubstanceName>
<StrengthNumber>.07</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
</NDCList>