{
"NDC": [
{
"NDCCode": "68462-778-55",
"PackageDescription": "25 VIAL in 1 CARTON (68462-778-55) / 20 mL in 1 VIAL (68462-778-20) ",
"NDC11Code": "68462-0778-55",
"ProductNDC": "68462-778",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20251008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251008",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-778-74",
"PackageDescription": "10 VIAL in 1 CARTON (68462-778-74) / 20 mL in 1 VIAL (68462-778-20) ",
"NDC11Code": "68462-0778-74",
"ProductNDC": "68462-778",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20251008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251008",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-192-55",
"PackageDescription": "45 g in 1 TUBE (68462-192-55) ",
"NDC11Code": "68462-0192-55",
"ProductNDC": "68462-192",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mometasone Furoate",
"NonProprietaryName": "Mometasone Furoate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20080528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078541",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "MOMETASONE FUROATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080528",
"SamplePackage": "N",
"IndicationAndUsage": "Mometasone furoate cream, 0.1% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 2 years of age or older.",
"Description": "Mometasone Furoate Cream USP, 0.1% contains mometasone furoate, USP for topical use. Mometasone furoate, USP is a synthetic corticosteroid with anti-inflammatory activity. Chemically, mometasone furoate, USP is 9α,21-dichloro-11β,17-dihydroxy-16α-methylpregna-1,4-diene-3,20-dione 17-(2-furoate), with the empirical formula C27H30Cl2O6, a molecular weight of 521.43 and the following structural formula. Mometasone furoate, USP is a white to off-white powder, soluble in acetone and methylene chloride. Each gram of Mometasone Furoate Cream USP, 0.1% contains: 1 mg mometasone furoate, USP in a cream base of aluminum starch octenyl succinate (Dry-Flo Plus (Pure)), hexylene glycol, phospholipon 90 H, phosphoric acid, purified water, titanium dioxide, white petrolatum, and white wax."
},
{
"NDCCode": "68462-225-55",
"PackageDescription": "45 g in 1 TUBE (68462-225-55) ",
"NDC11Code": "68462-0225-55",
"ProductNDC": "68462-225",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mometasone Furoate",
"NonProprietaryName": "Mometasone Furoate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20080528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078571",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "MOMETASONE FUROATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080528",
"SamplePackage": "N",
"IndicationAndUsage": "Mometasone furoate ointment, 0.1% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 2 years of age or older.",
"Description": "Mometasone Furoate Ointment USP, 0.1% contains mometasone furoate, USP for topical use. Mometasone furoate, USP is a synthetic corticosteroid with anti-inflammatory activity. Chemically, mometasone furoate, USP is 9α,21-dichloro-11β,17-dihydroxy-16α-methylpregna-1,4-diene-3,20-dione 17-(2-furoate), with the empirical formula C27H30Cl2O6, a molecular weight of 521.43 and the following structural formula. Mometasone furoate, USP is a white or almost white powder, practically insoluble in water, freely soluble in acetone and in methylene chloride, slightly soluble in alcohol. Each gram of mometasone furoate Ointment USP, 0.1% contains: 1 mg mometasone furoate, USP in an ointment base of hexylene glycol, phosphoric acid, propylene glycol monopalmitostearate, purified water, white petrolatum, and white wax."
},
{
"NDCCode": "68462-298-55",
"PackageDescription": "45 g in 1 TUBE (68462-298-55) ",
"NDC11Code": "68462-0298-55",
"ProductNDC": "68462-298",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clotrimazole And Betamethasone Dipropionate",
"NonProprietaryName": "Clotrimazole And Betamethasone Dipropionate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202894",
"LabelerName": "Glenmark Pharmaceuticals Inc. USA",
"SubstanceName": "CLOTRIMAZOLE; BETAMETHASONE DIPROPIONATE",
"StrengthNumber": "10; .5",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151106",
"SamplePackage": "N",
"IndicationAndUsage": "Clotrimazole and betamethasone dipropionate cream is a combination of an azole antifungal and corticosteroid and is indicated for the topical treatment of symptomatic inflammatory tinea pedis, tinea cruris, and tinea corporis due to Epidermophyton floccosum, Trichophyton mentagrophytes, and Trichophyton rubrum in patients 17 years and older.",
"Description": "Clotrimazole and Betamethasone Dipropionate Cream USP, 1%/0.05% (base), contains combinations of clotrimazole, USP, an azole antifungal, and betamethasone dipropionate, USP, a corticosteroid, for topical use. Chemically, clotrimazole, USP is 1-[(2-Chlorophenyl)diphenylmethyl]-1H-imidazole, with the empirical formula C22H17ClN2, a molecular weight of 344.84 g/mol, and the following structural formula. Clotrimazole, USP is a white to pale yellow, crystalline powder, odorless, practically insoluble in water, freely soluble in methanol, in acetone, in chloroform and in alcohol. Betamethasone dipropionate, USP has the chemical name 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C28H37FO7, a molecular weight of 504.60 g/mol, and the following structural formula. Betamethasone dipropionate, USP is a white to almost white crystalline powder, practically insoluble in water, freely soluble in acetone and in methylene chloride, sparingly soluble in alcohol. Each gram of Clotrimazole and Betamethasone Dipropionate Cream USP, 1%/0.05% (base) contains 10 mg clotrimazole, USP and 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone), in a white to off-white, uniform and smooth cream consisting of benzyl alcohol, ceteareth-30, cetyl alcohol, mineral oil, monobasic sodium phosphate, phosphoric acid, propylene glycol, purified water, sodium hydroxide, stearyl alcohol, and white petrolatum."
},
{
"NDCCode": "68462-301-55",
"PackageDescription": "45 g in 1 TUBE (68462-301-55) ",
"NDC11Code": "68462-0301-55",
"ProductNDC": "68462-301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adapalene And Benzoyl Peroxide",
"NonProprietaryName": "Adapalene And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208108",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ADAPALENE; BENZOYL PEROXIDE",
"StrengthNumber": "1; 25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191108",
"SamplePackage": "N",
"IndicationAndUsage": "Adapalene and benzoyl peroxide gel is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.",
"Description": "Adapalene and Benzoyl Peroxide Gel, 0.1%/2.5% is a white to pale yellow, opaque gel for topical use containing adapalene, USP, 0.1%, and benzoyl peroxide, USP, 2.5%. Adapalene, USP a synthetic retinoid, is a naphthoic acid derivative with retinoid-like properties. The chemical name for adapalene, USP is 6-(4-Methoxy-3-(tricyclo [3.3.1.13,7 ]dec-1-ylphenyl)-2-naphthalene carboxylic acid . It has the following structural formula. Adapalene, USP. Molecular formula: C28H28O3 Molecular weight: 412.52 g/mol. Benzoyl peroxide, USP is a highly lipophilic oxidizing agent that localizes in both bacterial and keratinocyte cell membranes. The chemical name for benzoyl peroxide, USP is dibenzoyl peroxide. It has the following structural formula. Benzoyl Peroxide, USP. Molecular formula: C14H10O4 Molecular weight: 242.23 g/mol. Adapalene and Benzoyl Peroxide Gel contains the following inactive ingredients: carbomer homopolymer type C, cyclomethicone, docusate sodium, edetate disodium, glycerin, propylene glycol, poloxamer 124, purified water, sorbitan oleate and sodium hydroxide."
},
{
"NDCCode": "68462-403-55",
"PackageDescription": "45 g in 1 TUBE (68462-403-55) ",
"NDC11Code": "68462-0403-55",
"ProductNDC": "68462-403",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adapalene",
"NonProprietaryName": "Adapalene",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091314",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ADAPALENE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-12-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100701",
"SamplePackage": "N"
},
{
"NDCCode": "68462-793-55",
"PackageDescription": "25 VIAL in 1 CARTON (68462-793-55) / 20 mL in 1 VIAL (68462-793-20) ",
"NDC11Code": "68462-0793-55",
"ProductNDC": "68462-793",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20250807",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250807",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-795-55",
"PackageDescription": "25 VIAL in 1 CARTON (68462-795-55) / 20 mL in 1 VIAL (68462-795-20) ",
"NDC11Code": "68462-0795-55",
"ProductNDC": "68462-795",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20250807",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250807",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "68462-307-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (68462-307-05) ",
"NDC11Code": "68462-0307-05",
"ProductNDC": "68462-307",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dimethyl Fumarate",
"NonProprietaryName": "Dimethyl-fumarate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210309",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "DIMETHYL FUMARATE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201006",
"SamplePackage": "N",
"IndicationAndUsage": "Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac."
},
{
"NDCCode": "68462-307-41",
"PackageDescription": "14 CAPSULE in 1 BOTTLE (68462-307-41) ",
"NDC11Code": "68462-0307-41",
"ProductNDC": "68462-307",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dimethyl Fumarate",
"NonProprietaryName": "Dimethyl-fumarate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210309",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "DIMETHYL FUMARATE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201006",
"SamplePackage": "N",
"IndicationAndUsage": "Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac."
},
{
"NDCCode": "68462-308-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (68462-308-05) ",
"NDC11Code": "68462-0308-05",
"ProductNDC": "68462-308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dimethyl Fumarate",
"NonProprietaryName": "Dimethyl-fumarate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210309",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "DIMETHYL FUMARATE",
"StrengthNumber": "240",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201006",
"SamplePackage": "N",
"IndicationAndUsage": "Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac."
},
{
"NDCCode": "68462-308-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (68462-308-60) ",
"NDC11Code": "68462-0308-60",
"ProductNDC": "68462-308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dimethyl Fumarate",
"NonProprietaryName": "Dimethyl-fumarate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210309",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "DIMETHYL FUMARATE",
"StrengthNumber": "240",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201006",
"SamplePackage": "N",
"IndicationAndUsage": "Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac."
},
{
"NDCCode": "68462-308-68",
"PackageDescription": "46 CAPSULE in 1 BOTTLE (68462-308-68) ",
"NDC11Code": "68462-0308-68",
"ProductNDC": "68462-308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dimethyl Fumarate",
"NonProprietaryName": "Dimethyl-fumarate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210309",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "DIMETHYL FUMARATE",
"StrengthNumber": "240",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201006",
"SamplePackage": "N",
"IndicationAndUsage": "Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac."
},
{
"NDCCode": "68462-386-14",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68462-386-14) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "68462-0386-14",
"ProductNDC": "68462-386",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solifenacin Succinate",
"NonProprietaryName": "Solifenacin Succinate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209239",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "SOLIFENACIN SUCCINATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190520",
"SamplePackage": "N",
"IndicationAndUsage": "Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40."
},
{
"NDCCode": "68462-386-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (68462-386-30) ",
"NDC11Code": "68462-0386-30",
"ProductNDC": "68462-386",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solifenacin Succinate",
"NonProprietaryName": "Solifenacin Succinate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209239",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "SOLIFENACIN SUCCINATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190520",
"SamplePackage": "N",
"IndicationAndUsage": "Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40."
},
{
"NDCCode": "68462-386-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68462-386-90) ",
"NDC11Code": "68462-0386-90",
"ProductNDC": "68462-386",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solifenacin Succinate",
"NonProprietaryName": "Solifenacin Succinate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209239",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "SOLIFENACIN SUCCINATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190520",
"SamplePackage": "N",
"IndicationAndUsage": "Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40."
},
{
"NDCCode": "68462-387-14",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68462-387-14) / 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "68462-0387-14",
"ProductNDC": "68462-387",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solifenacin Succinate",
"NonProprietaryName": "Solifenacin Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209239",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "SOLIFENACIN SUCCINATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190520",
"SamplePackage": "N",
"IndicationAndUsage": "Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40."
},
{
"NDCCode": "68462-387-30",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-387-30) ",
"NDC11Code": "68462-0387-30",
"ProductNDC": "68462-387",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solifenacin Succinate",
"NonProprietaryName": "Solifenacin Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209239",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "SOLIFENACIN SUCCINATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190520",
"SamplePackage": "N",
"IndicationAndUsage": "Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40."
},
{
"NDCCode": "68462-387-90",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-387-90) ",
"NDC11Code": "68462-0387-90",
"ProductNDC": "68462-387",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solifenacin Succinate",
"NonProprietaryName": "Solifenacin Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209239",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "SOLIFENACIN SUCCINATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190520",
"SamplePackage": "N",
"IndicationAndUsage": "Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40."
},
{
"NDCCode": "68462-393-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (68462-393-01) ",
"NDC11Code": "68462-0393-01",
"ProductNDC": "68462-393",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Raloxifene Hydrochloride",
"NonProprietaryName": "Raloxifene Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204491",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "RALOXIFENE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160322",
"SamplePackage": "N",
"IndicationAndUsage": "Raloxifene hydrochloride tablets are an estrogen agonist/antagonist indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women. (1.1), 2 Reduction in risk of invasive breast cancer in postmenopausal women with osteoporosis. (1.2), 3 Reduction in risk of invasive breast cancer in postmenopausal women at high risk for invasive breast cancer. (1.3).",
"Description": "Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl)benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride, USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05 g/mol. Raloxifene hydrochloride, USP is almost white or pale-yellow powder that is freely soluble in dimethyl sulfoxide, slightly soluble in methanol, very slightly soluble in ethanol and practically insoluble in water, isopropanol and octanol. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each Raloxifene Hydrochloride Tablet USP contains 60 mg of raloxifene hydrochloride, USP which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol 4000, talc, and titanium dioxide. Meets USP dissolution test 3."
},
{
"NDCCode": "68462-393-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (68462-393-10) ",
"NDC11Code": "68462-0393-10",
"ProductNDC": "68462-393",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Raloxifene Hydrochloride",
"NonProprietaryName": "Raloxifene Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204491",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "RALOXIFENE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160322",
"SamplePackage": "N",
"IndicationAndUsage": "Raloxifene hydrochloride tablets are an estrogen agonist/antagonist indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women. (1.1), 2 Reduction in risk of invasive breast cancer in postmenopausal women with osteoporosis. (1.2), 3 Reduction in risk of invasive breast cancer in postmenopausal women at high risk for invasive breast cancer. (1.3).",
"Description": "Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl)benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride, USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05 g/mol. Raloxifene hydrochloride, USP is almost white or pale-yellow powder that is freely soluble in dimethyl sulfoxide, slightly soluble in methanol, very slightly soluble in ethanol and practically insoluble in water, isopropanol and octanol. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each Raloxifene Hydrochloride Tablet USP contains 60 mg of raloxifene hydrochloride, USP which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol 4000, talc, and titanium dioxide. Meets USP dissolution test 3."
},
{
"NDCCode": "68462-393-23",
"PackageDescription": "2000 TABLET, FILM COATED in 1 BOTTLE (68462-393-23) ",
"NDC11Code": "68462-0393-23",
"ProductNDC": "68462-393",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Raloxifene Hydrochloride",
"NonProprietaryName": "Raloxifene Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204491",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "RALOXIFENE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160322",
"SamplePackage": "N",
"IndicationAndUsage": "Raloxifene hydrochloride tablets are an estrogen agonist/antagonist indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women. (1.1), 2 Reduction in risk of invasive breast cancer in postmenopausal women with osteoporosis. (1.2), 3 Reduction in risk of invasive breast cancer in postmenopausal women at high risk for invasive breast cancer. (1.3).",
"Description": "Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl)benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride, USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05 g/mol. Raloxifene hydrochloride, USP is almost white or pale-yellow powder that is freely soluble in dimethyl sulfoxide, slightly soluble in methanol, very slightly soluble in ethanol and practically insoluble in water, isopropanol and octanol. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each Raloxifene Hydrochloride Tablet USP contains 60 mg of raloxifene hydrochloride, USP which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol 4000, talc, and titanium dioxide. Meets USP dissolution test 3."
},
{
"NDCCode": "68462-393-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (68462-393-30) ",
"NDC11Code": "68462-0393-30",
"ProductNDC": "68462-393",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Raloxifene Hydrochloride",
"NonProprietaryName": "Raloxifene Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204491",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "RALOXIFENE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160322",
"SamplePackage": "N",
"IndicationAndUsage": "Raloxifene hydrochloride tablets are an estrogen agonist/antagonist indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women. (1.1), 2 Reduction in risk of invasive breast cancer in postmenopausal women with osteoporosis. (1.2), 3 Reduction in risk of invasive breast cancer in postmenopausal women at high risk for invasive breast cancer. (1.3).",
"Description": "Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl)benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride, USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05 g/mol. Raloxifene hydrochloride, USP is almost white or pale-yellow powder that is freely soluble in dimethyl sulfoxide, slightly soluble in methanol, very slightly soluble in ethanol and practically insoluble in water, isopropanol and octanol. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each Raloxifene Hydrochloride Tablet USP contains 60 mg of raloxifene hydrochloride, USP which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol 4000, talc, and titanium dioxide. Meets USP dissolution test 3."
},
{
"NDCCode": "68462-393-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68462-393-90) ",
"NDC11Code": "68462-0393-90",
"ProductNDC": "68462-393",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Raloxifene Hydrochloride",
"NonProprietaryName": "Raloxifene Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204491",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "RALOXIFENE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160322",
"SamplePackage": "N",
"IndicationAndUsage": "Raloxifene hydrochloride tablets are an estrogen agonist/antagonist indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women. (1.1), 2 Reduction in risk of invasive breast cancer in postmenopausal women with osteoporosis. (1.2), 3 Reduction in risk of invasive breast cancer in postmenopausal women at high risk for invasive breast cancer. (1.3).",
"Description": "Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl)benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride, USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05 g/mol. Raloxifene hydrochloride, USP is almost white or pale-yellow powder that is freely soluble in dimethyl sulfoxide, slightly soluble in methanol, very slightly soluble in ethanol and practically insoluble in water, isopropanol and octanol. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each Raloxifene Hydrochloride Tablet USP contains 60 mg of raloxifene hydrochloride, USP which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol 4000, talc, and titanium dioxide. Meets USP dissolution test 3."
},
{
"NDCCode": "68462-405-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (68462-405-30) ",
"NDC11Code": "68462-0405-30",
"ProductNDC": "68462-405",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Asprin And Extended-release Dipyridamole",
"NonProprietaryName": "Asprin And Extended-release Dipyridamole",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210318",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ASPIRIN; DIPYRIDAMOLE",
"StrengthNumber": "25; 200",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190524",
"SamplePackage": "N",
"IndicationAndUsage": "Aspirin and extended-release dipyridamole capsules are indicated to reduce the risk of stroke in patients who have had transient ischemia of the brain or completed ischemic stroke due to thrombosis.",
"Description": "Aspirin and Extended-Release Dipyridamole Capsules are a combination of aspirin and dipyridamole, antiplatelet agents, intended for oral administration. Each hard gelatin capsule contains 200 mg dipyridamole, USP in an extended-release form and 25 mg aspirin, USP as an immediate-release sugar-coated tablet. In addition, each capsule contains the following inactive ingredients: acacia milled powder, eudragit S-100, glyceryl behenate, hydroxy propyl methyl cellulose phthalate HP-55, hypromellose, hypromellose E3LV, hypromellose E50LV, lactose monohydrate, microcrystalline cellulose, micronized talc, povidone K 30, silicon dioxide, talc, tartatic acid pellets and triacetin. Each capsule shell contains FD & C blue 1, FD & C red 3, FD & C red 40, FD & C yellow 6, gelatin, iron oxide yellow, sodium lauryl sulphate and titanium dioxide. The imprinting ink contains black iron oxide, potassium hydroxide, and shellac. Dipyridamole. Dipyridamole is an antiplatelet agent chemically described as 2,2',2'',2'''-[(4,8-Dipiperidinopyrimido[5,4-d]pyrimidine-2,6-diyl)dinitrilo]-tetraethanol. It has the following structural formula. Dipyridamole is an odorless yellow crystalline substance, having a bitter taste. It is soluble in dilute acids, methanol and chloroform, and is practically insoluble in water. Aspirin. The antiplatelet agent aspirin (acetylsalicylic acid) is chemically known as benzoic acid, 2- (acetyloxy)-, and has the following structural formula. Aspirin has white crystals, commonly tubular or needle-like, or white, crystalline powder. When exposed to moisture, aspirin hydrolyzes into salicylic and acetic acids, and gives off a vinegary odor. It is slightly soluble in water; freely soluble in alcohol; soluble in chloroform and in ether; sparingly soluble in absolute ether."
},
{
"NDCCode": "68462-405-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (68462-405-60) ",
"NDC11Code": "68462-0405-60",
"ProductNDC": "68462-405",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Asprin And Extended-release Dipyridamole",
"NonProprietaryName": "Asprin And Extended-release Dipyridamole",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210318",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "ASPIRIN; DIPYRIDAMOLE",
"StrengthNumber": "25; 200",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190524",
"SamplePackage": "N",
"IndicationAndUsage": "Aspirin and extended-release dipyridamole capsules are indicated to reduce the risk of stroke in patients who have had transient ischemia of the brain or completed ischemic stroke due to thrombosis.",
"Description": "Aspirin and Extended-Release Dipyridamole Capsules are a combination of aspirin and dipyridamole, antiplatelet agents, intended for oral administration. Each hard gelatin capsule contains 200 mg dipyridamole, USP in an extended-release form and 25 mg aspirin, USP as an immediate-release sugar-coated tablet. In addition, each capsule contains the following inactive ingredients: acacia milled powder, eudragit S-100, glyceryl behenate, hydroxy propyl methyl cellulose phthalate HP-55, hypromellose, hypromellose E3LV, hypromellose E50LV, lactose monohydrate, microcrystalline cellulose, micronized talc, povidone K 30, silicon dioxide, talc, tartatic acid pellets and triacetin. Each capsule shell contains FD & C blue 1, FD & C red 3, FD & C red 40, FD & C yellow 6, gelatin, iron oxide yellow, sodium lauryl sulphate and titanium dioxide. The imprinting ink contains black iron oxide, potassium hydroxide, and shellac. Dipyridamole. Dipyridamole is an antiplatelet agent chemically described as 2,2',2'',2'''-[(4,8-Dipiperidinopyrimido[5,4-d]pyrimidine-2,6-diyl)dinitrilo]-tetraethanol. It has the following structural formula. Dipyridamole is an odorless yellow crystalline substance, having a bitter taste. It is soluble in dilute acids, methanol and chloroform, and is practically insoluble in water. Aspirin. The antiplatelet agent aspirin (acetylsalicylic acid) is chemically known as benzoic acid, 2- (acetyloxy)-, and has the following structural formula. Aspirin has white crystals, commonly tubular or needle-like, or white, crystalline powder. When exposed to moisture, aspirin hydrolyzes into salicylic and acetic acids, and gives off a vinegary odor. It is slightly soluble in water; freely soluble in alcohol; soluble in chloroform and in ether; sparingly soluble in absolute ether."
},
{
"NDCCode": "68462-562-01",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (68462-562-01) ",
"NDC11Code": "68462-0562-01",
"ProductNDC": "68462-562",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212317",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210322",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Extended-Release Capsules (Twice-a-Day Dosage) are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive medications, such as diuretics.",
"Description": "Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride, USP is a white crystalline powder or small crystals. It is freely soluble in chloroform, formic acid, methanol, water, sparingly soluble in dehydrated alcohol and insoluble in ether. It has a molecular weight of 450.98 g/mol. Each Diltiazem Hydrochloride Extended-Release Capsules, USP contains either 60 mg diltiazem hydrochloride (equivalent to 55.1 mg diltiazem), 90 mg diltiazem hydrochloride (equivalent to 82.7 mg diltiazem), or 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem). Also contains: Diethyl phthalate, ethyl cellulose, methacrylic acid and ethyl acrylate copolymer, polysorbate, povidone, sodium lauryl sulfate, sugar spheres (corn starch, hypromellose and sucrose) and talc. The capsule shells contain D&C Yellow No. 10 (90 mg only), FD&C Red No. 3, FD&C Red No.40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The black printing ink contains black iron oxide, potassium hydroxide and shellac. For oral administration. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "68462-570-78",
"PackageDescription": "1 KIT in 1 KIT (68462-570-78) * 14 CAPSULE in 1 BOTTLE * 46 CAPSULE in 1 BOTTLE",
"NDC11Code": "68462-0570-78",
"ProductNDC": "68462-570",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dimethyl Fumarate",
"NonProprietaryName": "Dimethyl Fumarate Kit",
"DosageFormName": "KIT",
"StartMarketingDate": "20201006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210309",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"Status": "Active",
"LastUpdate": "2024-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201006",
"SamplePackage": "N",
"IndicationAndUsage": "Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac."
},
{
"NDCCode": "68462-850-01",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (68462-850-01) ",
"NDC11Code": "68462-0850-01",
"ProductNDC": "68462-850",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212317",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210322",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Extended-Release Capsules (Twice-a-Day Dosage) are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive medications, such as diuretics.",
"Description": "Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride, USP is a white crystalline powder or small crystals. It is freely soluble in chloroform, formic acid, methanol, water, sparingly soluble in dehydrated alcohol and insoluble in ether. It has a molecular weight of 450.98 g/mol. Each Diltiazem Hydrochloride Extended-Release Capsules, USP contains either 60 mg diltiazem hydrochloride (equivalent to 55.1 mg diltiazem), 90 mg diltiazem hydrochloride (equivalent to 82.7 mg diltiazem), or 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem). Also contains: Diethyl phthalate, ethyl cellulose, methacrylic acid and ethyl acrylate copolymer, polysorbate, povidone, sodium lauryl sulfate, sugar spheres (corn starch, hypromellose and sucrose) and talc. The capsule shells contain D&C Yellow No. 10 (90 mg only), FD&C Red No. 3, FD&C Red No.40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The black printing ink contains black iron oxide, potassium hydroxide and shellac. For oral administration. FDA approved dissolution test specifications differ from USP."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68462-778-55</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (68462-778-55) / 20 mL in 1 VIAL (68462-778-20) </PackageDescription>
<NDC11Code>68462-0778-55</NDC11Code>
<ProductNDC>68462-778</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20251008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-778-74</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68462-778-74) / 20 mL in 1 VIAL (68462-778-20) </PackageDescription>
<NDC11Code>68462-0778-74</NDC11Code>
<ProductNDC>68462-778</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20251008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-192-55</NDCCode>
<PackageDescription>45 g in 1 TUBE (68462-192-55) </PackageDescription>
<NDC11Code>68462-0192-55</NDC11Code>
<ProductNDC>68462-192</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mometasone Furoate</ProprietaryName>
<NonProprietaryName>Mometasone Furoate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20080528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078541</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>MOMETASONE FUROATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mometasone furoate cream, 0.1% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 2 years of age or older.</IndicationAndUsage>
<Description>Mometasone Furoate Cream USP, 0.1% contains mometasone furoate, USP for topical use. Mometasone furoate, USP is a synthetic corticosteroid with anti-inflammatory activity. Chemically, mometasone furoate, USP is 9α,21-dichloro-11β,17-dihydroxy-16α-methylpregna-1,4-diene-3,20-dione 17-(2-furoate), with the empirical formula C27H30Cl2O6, a molecular weight of 521.43 and the following structural formula. Mometasone furoate, USP is a white to off-white powder, soluble in acetone and methylene chloride. Each gram of Mometasone Furoate Cream USP, 0.1% contains: 1 mg mometasone furoate, USP in a cream base of aluminum starch octenyl succinate (Dry-Flo Plus (Pure)), hexylene glycol, phospholipon 90 H, phosphoric acid, purified water, titanium dioxide, white petrolatum, and white wax.</Description>
</NDC>
<NDC>
<NDCCode>68462-225-55</NDCCode>
<PackageDescription>45 g in 1 TUBE (68462-225-55) </PackageDescription>
<NDC11Code>68462-0225-55</NDC11Code>
<ProductNDC>68462-225</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mometasone Furoate</ProprietaryName>
<NonProprietaryName>Mometasone Furoate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20080528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078571</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>MOMETASONE FUROATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mometasone furoate ointment, 0.1% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 2 years of age or older.</IndicationAndUsage>
<Description>Mometasone Furoate Ointment USP, 0.1% contains mometasone furoate, USP for topical use. Mometasone furoate, USP is a synthetic corticosteroid with anti-inflammatory activity. Chemically, mometasone furoate, USP is 9α,21-dichloro-11β,17-dihydroxy-16α-methylpregna-1,4-diene-3,20-dione 17-(2-furoate), with the empirical formula C27H30Cl2O6, a molecular weight of 521.43 and the following structural formula. Mometasone furoate, USP is a white or almost white powder, practically insoluble in water, freely soluble in acetone and in methylene chloride, slightly soluble in alcohol. Each gram of mometasone furoate Ointment USP, 0.1% contains: 1 mg mometasone furoate, USP in an ointment base of hexylene glycol, phosphoric acid, propylene glycol monopalmitostearate, purified water, white petrolatum, and white wax.</Description>
</NDC>
<NDC>
<NDCCode>68462-298-55</NDCCode>
<PackageDescription>45 g in 1 TUBE (68462-298-55) </PackageDescription>
<NDC11Code>68462-0298-55</NDC11Code>
<ProductNDC>68462-298</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clotrimazole And Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Clotrimazole And Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202894</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc. USA</LabelerName>
<SubstanceName>CLOTRIMAZOLE; BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>10; .5</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clotrimazole and betamethasone dipropionate cream is a combination of an azole antifungal and corticosteroid and is indicated for the topical treatment of symptomatic inflammatory tinea pedis, tinea cruris, and tinea corporis due to Epidermophyton floccosum, Trichophyton mentagrophytes, and Trichophyton rubrum in patients 17 years and older.</IndicationAndUsage>
<Description>Clotrimazole and Betamethasone Dipropionate Cream USP, 1%/0.05% (base), contains combinations of clotrimazole, USP, an azole antifungal, and betamethasone dipropionate, USP, a corticosteroid, for topical use. Chemically, clotrimazole, USP is 1-[(2-Chlorophenyl)diphenylmethyl]-1H-imidazole, with the empirical formula C22H17ClN2, a molecular weight of 344.84 g/mol, and the following structural formula. Clotrimazole, USP is a white to pale yellow, crystalline powder, odorless, practically insoluble in water, freely soluble in methanol, in acetone, in chloroform and in alcohol. Betamethasone dipropionate, USP has the chemical name 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C28H37FO7, a molecular weight of 504.60 g/mol, and the following structural formula. Betamethasone dipropionate, USP is a white to almost white crystalline powder, practically insoluble in water, freely soluble in acetone and in methylene chloride, sparingly soluble in alcohol. Each gram of Clotrimazole and Betamethasone Dipropionate Cream USP, 1%/0.05% (base) contains 10 mg clotrimazole, USP and 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone), in a white to off-white, uniform and smooth cream consisting of benzyl alcohol, ceteareth-30, cetyl alcohol, mineral oil, monobasic sodium phosphate, phosphoric acid, propylene glycol, purified water, sodium hydroxide, stearyl alcohol, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>68462-301-55</NDCCode>
<PackageDescription>45 g in 1 TUBE (68462-301-55) </PackageDescription>
<NDC11Code>68462-0301-55</NDC11Code>
<ProductNDC>68462-301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adapalene And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Adapalene And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208108</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ADAPALENE; BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>1; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adapalene and benzoyl peroxide gel is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.</IndicationAndUsage>
<Description>Adapalene and Benzoyl Peroxide Gel, 0.1%/2.5% is a white to pale yellow, opaque gel for topical use containing adapalene, USP, 0.1%, and benzoyl peroxide, USP, 2.5%. Adapalene, USP a synthetic retinoid, is a naphthoic acid derivative with retinoid-like properties. The chemical name for adapalene, USP is 6-(4-Methoxy-3-(tricyclo [3.3.1.13,7 ]dec-1-ylphenyl)-2-naphthalene carboxylic acid . It has the following structural formula. Adapalene, USP. Molecular formula: C28H28O3 Molecular weight: 412.52 g/mol. Benzoyl peroxide, USP is a highly lipophilic oxidizing agent that localizes in both bacterial and keratinocyte cell membranes. The chemical name for benzoyl peroxide, USP is dibenzoyl peroxide. It has the following structural formula. Benzoyl Peroxide, USP. Molecular formula: C14H10O4 Molecular weight: 242.23 g/mol. Adapalene and Benzoyl Peroxide Gel contains the following inactive ingredients: carbomer homopolymer type C, cyclomethicone, docusate sodium, edetate disodium, glycerin, propylene glycol, poloxamer 124, purified water, sorbitan oleate and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>68462-403-55</NDCCode>
<PackageDescription>45 g in 1 TUBE (68462-403-55) </PackageDescription>
<NDC11Code>68462-0403-55</NDC11Code>
<ProductNDC>68462-403</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adapalene</ProprietaryName>
<NonProprietaryName>Adapalene</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091314</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ADAPALENE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-12-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68462-793-55</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (68462-793-55) / 20 mL in 1 VIAL (68462-793-20) </PackageDescription>
<NDC11Code>68462-0793-55</NDC11Code>
<ProductNDC>68462-793</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20250807</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-795-55</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (68462-795-55) / 20 mL in 1 VIAL (68462-795-20) </PackageDescription>
<NDC11Code>68462-0795-55</NDC11Code>
<ProductNDC>68462-795</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20250807</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W.328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>68462-307-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (68462-307-05) </PackageDescription>
<NDC11Code>68462-0307-05</NDC11Code>
<ProductNDC>68462-307</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dimethyl Fumarate</ProprietaryName>
<NonProprietaryName>Dimethyl-fumarate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210309</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>DIMETHYL FUMARATE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201006</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-307-41</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE (68462-307-41) </PackageDescription>
<NDC11Code>68462-0307-41</NDC11Code>
<ProductNDC>68462-307</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dimethyl Fumarate</ProprietaryName>
<NonProprietaryName>Dimethyl-fumarate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210309</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>DIMETHYL FUMARATE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201006</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-308-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (68462-308-05) </PackageDescription>
<NDC11Code>68462-0308-05</NDC11Code>
<ProductNDC>68462-308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dimethyl Fumarate</ProprietaryName>
<NonProprietaryName>Dimethyl-fumarate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210309</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>DIMETHYL FUMARATE</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201006</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-308-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (68462-308-60) </PackageDescription>
<NDC11Code>68462-0308-60</NDC11Code>
<ProductNDC>68462-308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dimethyl Fumarate</ProprietaryName>
<NonProprietaryName>Dimethyl-fumarate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210309</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>DIMETHYL FUMARATE</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201006</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-308-68</NDCCode>
<PackageDescription>46 CAPSULE in 1 BOTTLE (68462-308-68) </PackageDescription>
<NDC11Code>68462-0308-68</NDC11Code>
<ProductNDC>68462-308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dimethyl Fumarate</ProprietaryName>
<NonProprietaryName>Dimethyl-fumarate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210309</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>DIMETHYL FUMARATE</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201006</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-386-14</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68462-386-14) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0386-14</NDC11Code>
<ProductNDC>68462-386</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solifenacin Succinate</ProprietaryName>
<NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209239</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40.</Description>
</NDC>
<NDC>
<NDCCode>68462-386-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (68462-386-30) </PackageDescription>
<NDC11Code>68462-0386-30</NDC11Code>
<ProductNDC>68462-386</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solifenacin Succinate</ProprietaryName>
<NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209239</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40.</Description>
</NDC>
<NDC>
<NDCCode>68462-386-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68462-386-90) </PackageDescription>
<NDC11Code>68462-0386-90</NDC11Code>
<ProductNDC>68462-386</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solifenacin Succinate</ProprietaryName>
<NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209239</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40.</Description>
</NDC>
<NDC>
<NDCCode>68462-387-14</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68462-387-14) / 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0387-14</NDC11Code>
<ProductNDC>68462-387</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solifenacin Succinate</ProprietaryName>
<NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209239</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40.</Description>
</NDC>
<NDC>
<NDCCode>68462-387-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-387-30) </PackageDescription>
<NDC11Code>68462-0387-30</NDC11Code>
<ProductNDC>68462-387</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solifenacin Succinate</ProprietaryName>
<NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209239</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40.</Description>
</NDC>
<NDC>
<NDCCode>68462-387-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (68462-387-90) </PackageDescription>
<NDC11Code>68462-0387-90</NDC11Code>
<ProductNDC>68462-387</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solifenacin Succinate</ProprietaryName>
<NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209239</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Solifenacin succinate tablets are a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with 1(S)-phenyl-1,2,3,4-tetrahydroisoquinoline-2-carboxylic acid 3(R)-quinuclidinyl ester Monosuccinate having an empirical formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55 g/mol. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble or soluble in water, glacial acetic acid, dimethyl sulfoxide; soluble in methanol, very slightly soluble in acetone and ethanol. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is formulated for oral administration. In addition to the active ingredient solifenacin succinate, the tablets also contain the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, talc, titanium dioxide and triacetin. The 5 mg tablets contain the colorants iron oxide yellow and FD&C yellow# 6. The 10 mg tablets contain the colorants iron oxide yellow and FD&C Red# 40.</Description>
</NDC>
<NDC>
<NDCCode>68462-393-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (68462-393-01) </PackageDescription>
<NDC11Code>68462-0393-01</NDC11Code>
<ProductNDC>68462-393</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Raloxifene Hydrochloride</ProprietaryName>
<NonProprietaryName>Raloxifene Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204491</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>RALOXIFENE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Raloxifene hydrochloride tablets are an estrogen agonist/antagonist indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women. (1.1), 2 Reduction in risk of invasive breast cancer in postmenopausal women with osteoporosis. (1.2), 3 Reduction in risk of invasive breast cancer in postmenopausal women at high risk for invasive breast cancer. (1.3).</IndicationAndUsage>
<Description>Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl)benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride, USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05 g/mol. Raloxifene hydrochloride, USP is almost white or pale-yellow powder that is freely soluble in dimethyl sulfoxide, slightly soluble in methanol, very slightly soluble in ethanol and practically insoluble in water, isopropanol and octanol. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each Raloxifene Hydrochloride Tablet USP contains 60 mg of raloxifene hydrochloride, USP which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol 4000, talc, and titanium dioxide. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>68462-393-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (68462-393-10) </PackageDescription>
<NDC11Code>68462-0393-10</NDC11Code>
<ProductNDC>68462-393</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Raloxifene Hydrochloride</ProprietaryName>
<NonProprietaryName>Raloxifene Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204491</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>RALOXIFENE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Raloxifene hydrochloride tablets are an estrogen agonist/antagonist indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women. (1.1), 2 Reduction in risk of invasive breast cancer in postmenopausal women with osteoporosis. (1.2), 3 Reduction in risk of invasive breast cancer in postmenopausal women at high risk for invasive breast cancer. (1.3).</IndicationAndUsage>
<Description>Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl)benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride, USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05 g/mol. Raloxifene hydrochloride, USP is almost white or pale-yellow powder that is freely soluble in dimethyl sulfoxide, slightly soluble in methanol, very slightly soluble in ethanol and practically insoluble in water, isopropanol and octanol. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each Raloxifene Hydrochloride Tablet USP contains 60 mg of raloxifene hydrochloride, USP which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol 4000, talc, and titanium dioxide. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>68462-393-23</NDCCode>
<PackageDescription>2000 TABLET, FILM COATED in 1 BOTTLE (68462-393-23) </PackageDescription>
<NDC11Code>68462-0393-23</NDC11Code>
<ProductNDC>68462-393</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Raloxifene Hydrochloride</ProprietaryName>
<NonProprietaryName>Raloxifene Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204491</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>RALOXIFENE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Raloxifene hydrochloride tablets are an estrogen agonist/antagonist indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women. (1.1), 2 Reduction in risk of invasive breast cancer in postmenopausal women with osteoporosis. (1.2), 3 Reduction in risk of invasive breast cancer in postmenopausal women at high risk for invasive breast cancer. (1.3).</IndicationAndUsage>
<Description>Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl)benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride, USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05 g/mol. Raloxifene hydrochloride, USP is almost white or pale-yellow powder that is freely soluble in dimethyl sulfoxide, slightly soluble in methanol, very slightly soluble in ethanol and practically insoluble in water, isopropanol and octanol. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each Raloxifene Hydrochloride Tablet USP contains 60 mg of raloxifene hydrochloride, USP which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol 4000, talc, and titanium dioxide. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>68462-393-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (68462-393-30) </PackageDescription>
<NDC11Code>68462-0393-30</NDC11Code>
<ProductNDC>68462-393</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Raloxifene Hydrochloride</ProprietaryName>
<NonProprietaryName>Raloxifene Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204491</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>RALOXIFENE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Raloxifene hydrochloride tablets are an estrogen agonist/antagonist indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women. (1.1), 2 Reduction in risk of invasive breast cancer in postmenopausal women with osteoporosis. (1.2), 3 Reduction in risk of invasive breast cancer in postmenopausal women at high risk for invasive breast cancer. (1.3).</IndicationAndUsage>
<Description>Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl)benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride, USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05 g/mol. Raloxifene hydrochloride, USP is almost white or pale-yellow powder that is freely soluble in dimethyl sulfoxide, slightly soluble in methanol, very slightly soluble in ethanol and practically insoluble in water, isopropanol and octanol. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each Raloxifene Hydrochloride Tablet USP contains 60 mg of raloxifene hydrochloride, USP which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol 4000, talc, and titanium dioxide. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>68462-393-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68462-393-90) </PackageDescription>
<NDC11Code>68462-0393-90</NDC11Code>
<ProductNDC>68462-393</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Raloxifene Hydrochloride</ProprietaryName>
<NonProprietaryName>Raloxifene Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204491</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>RALOXIFENE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Raloxifene hydrochloride tablets are an estrogen agonist/antagonist indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women. (1.1), 2 Reduction in risk of invasive breast cancer in postmenopausal women with osteoporosis. (1.2), 3 Reduction in risk of invasive breast cancer in postmenopausal women at high risk for invasive breast cancer. (1.3).</IndicationAndUsage>
<Description>Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl)benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride, USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05 g/mol. Raloxifene hydrochloride, USP is almost white or pale-yellow powder that is freely soluble in dimethyl sulfoxide, slightly soluble in methanol, very slightly soluble in ethanol and practically insoluble in water, isopropanol and octanol. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each Raloxifene Hydrochloride Tablet USP contains 60 mg of raloxifene hydrochloride, USP which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol 4000, talc, and titanium dioxide. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>68462-405-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (68462-405-30) </PackageDescription>
<NDC11Code>68462-0405-30</NDC11Code>
<ProductNDC>68462-405</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Asprin And Extended-release Dipyridamole</ProprietaryName>
<NonProprietaryName>Asprin And Extended-release Dipyridamole</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210318</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ASPIRIN; DIPYRIDAMOLE</SubstanceName>
<StrengthNumber>25; 200</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aspirin and extended-release dipyridamole capsules are indicated to reduce the risk of stroke in patients who have had transient ischemia of the brain or completed ischemic stroke due to thrombosis.</IndicationAndUsage>
<Description>Aspirin and Extended-Release Dipyridamole Capsules are a combination of aspirin and dipyridamole, antiplatelet agents, intended for oral administration. Each hard gelatin capsule contains 200 mg dipyridamole, USP in an extended-release form and 25 mg aspirin, USP as an immediate-release sugar-coated tablet. In addition, each capsule contains the following inactive ingredients: acacia milled powder, eudragit S-100, glyceryl behenate, hydroxy propyl methyl cellulose phthalate HP-55, hypromellose, hypromellose E3LV, hypromellose E50LV, lactose monohydrate, microcrystalline cellulose, micronized talc, povidone K 30, silicon dioxide, talc, tartatic acid pellets and triacetin. Each capsule shell contains FD & C blue 1, FD & C red 3, FD & C red 40, FD & C yellow 6, gelatin, iron oxide yellow, sodium lauryl sulphate and titanium dioxide. The imprinting ink contains black iron oxide, potassium hydroxide, and shellac. Dipyridamole. Dipyridamole is an antiplatelet agent chemically described as 2,2',2'',2'''-[(4,8-Dipiperidinopyrimido[5,4-d]pyrimidine-2,6-diyl)dinitrilo]-tetraethanol. It has the following structural formula. Dipyridamole is an odorless yellow crystalline substance, having a bitter taste. It is soluble in dilute acids, methanol and chloroform, and is practically insoluble in water. Aspirin. The antiplatelet agent aspirin (acetylsalicylic acid) is chemically known as benzoic acid, 2- (acetyloxy)-, and has the following structural formula. Aspirin has white crystals, commonly tubular or needle-like, or white, crystalline powder. When exposed to moisture, aspirin hydrolyzes into salicylic and acetic acids, and gives off a vinegary odor. It is slightly soluble in water; freely soluble in alcohol; soluble in chloroform and in ether; sparingly soluble in absolute ether.</Description>
</NDC>
<NDC>
<NDCCode>68462-405-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (68462-405-60) </PackageDescription>
<NDC11Code>68462-0405-60</NDC11Code>
<ProductNDC>68462-405</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Asprin And Extended-release Dipyridamole</ProprietaryName>
<NonProprietaryName>Asprin And Extended-release Dipyridamole</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210318</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>ASPIRIN; DIPYRIDAMOLE</SubstanceName>
<StrengthNumber>25; 200</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aspirin and extended-release dipyridamole capsules are indicated to reduce the risk of stroke in patients who have had transient ischemia of the brain or completed ischemic stroke due to thrombosis.</IndicationAndUsage>
<Description>Aspirin and Extended-Release Dipyridamole Capsules are a combination of aspirin and dipyridamole, antiplatelet agents, intended for oral administration. Each hard gelatin capsule contains 200 mg dipyridamole, USP in an extended-release form and 25 mg aspirin, USP as an immediate-release sugar-coated tablet. In addition, each capsule contains the following inactive ingredients: acacia milled powder, eudragit S-100, glyceryl behenate, hydroxy propyl methyl cellulose phthalate HP-55, hypromellose, hypromellose E3LV, hypromellose E50LV, lactose monohydrate, microcrystalline cellulose, micronized talc, povidone K 30, silicon dioxide, talc, tartatic acid pellets and triacetin. Each capsule shell contains FD & C blue 1, FD & C red 3, FD & C red 40, FD & C yellow 6, gelatin, iron oxide yellow, sodium lauryl sulphate and titanium dioxide. The imprinting ink contains black iron oxide, potassium hydroxide, and shellac. Dipyridamole. Dipyridamole is an antiplatelet agent chemically described as 2,2',2'',2'''-[(4,8-Dipiperidinopyrimido[5,4-d]pyrimidine-2,6-diyl)dinitrilo]-tetraethanol. It has the following structural formula. Dipyridamole is an odorless yellow crystalline substance, having a bitter taste. It is soluble in dilute acids, methanol and chloroform, and is practically insoluble in water. Aspirin. The antiplatelet agent aspirin (acetylsalicylic acid) is chemically known as benzoic acid, 2- (acetyloxy)-, and has the following structural formula. Aspirin has white crystals, commonly tubular or needle-like, or white, crystalline powder. When exposed to moisture, aspirin hydrolyzes into salicylic and acetic acids, and gives off a vinegary odor. It is slightly soluble in water; freely soluble in alcohol; soluble in chloroform and in ether; sparingly soluble in absolute ether.</Description>
</NDC>
<NDC>
<NDCCode>68462-562-01</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (68462-562-01) </PackageDescription>
<NDC11Code>68462-0562-01</NDC11Code>
<ProductNDC>68462-562</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212317</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Extended-Release Capsules (Twice-a-Day Dosage) are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive medications, such as diuretics.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride, USP is a white crystalline powder or small crystals. It is freely soluble in chloroform, formic acid, methanol, water, sparingly soluble in dehydrated alcohol and insoluble in ether. It has a molecular weight of 450.98 g/mol. Each Diltiazem Hydrochloride Extended-Release Capsules, USP contains either 60 mg diltiazem hydrochloride (equivalent to 55.1 mg diltiazem), 90 mg diltiazem hydrochloride (equivalent to 82.7 mg diltiazem), or 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem). Also contains: Diethyl phthalate, ethyl cellulose, methacrylic acid and ethyl acrylate copolymer, polysorbate, povidone, sodium lauryl sulfate, sugar spheres (corn starch, hypromellose and sucrose) and talc. The capsule shells contain D&C Yellow No. 10 (90 mg only), FD&C Red No. 3, FD&C Red No.40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The black printing ink contains black iron oxide, potassium hydroxide and shellac. For oral administration. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>68462-570-78</NDCCode>
<PackageDescription>1 KIT in 1 KIT (68462-570-78) * 14 CAPSULE in 1 BOTTLE * 46 CAPSULE in 1 BOTTLE</PackageDescription>
<NDC11Code>68462-0570-78</NDC11Code>
<ProductNDC>68462-570</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dimethyl Fumarate</ProprietaryName>
<NonProprietaryName>Dimethyl Fumarate Kit</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20201006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210309</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201006</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dimethyl fumarate delayed-release capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Dimethyl Fumarate Delayed-Release Capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is sparingly soluble in methanol; insoluble in water with a molecular mass of 144.13. Dimethyl Fumarate Delayed-Release Capsules are provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate consisting of the following inactive ingredients: croscarmellose sodium, hydrophobic colloidal silica, magnesium stearate, methacrylic acid and methyl methacrylate copolymer, methacrylic acid copolymer dispersion (Eudragit L30 D-55), microcrystalline cellulose, simethicone (30% emulsion), talc and triethyl citrate. Eudragit L30 D-55 has the following ingredients: copolymer of methacrylic acid and ethyl acrylate, sodium lauryl sulphate, polysorbate 80 and purified water. The capsule shell for Dimethyl Fumarate Delayed-Release Capsules, 120 mg and 240 mg contains gelatin, titanium dioxide, FD&C blue 1, iron oxide yellow and iron oxide black. The imprinting ink for Dimethyl Fumarate Delayed-Release Capsule, 120 mg and 240 mg has the following components: black iron oxide, potassium hydroxide, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68462-850-01</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (68462-850-01) </PackageDescription>
<NDC11Code>68462-0850-01</NDC11Code>
<ProductNDC>68462-850</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212317</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Extended-Release Capsules (Twice-a-Day Dosage) are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive medications, such as diuretics.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride, USP is a white crystalline powder or small crystals. It is freely soluble in chloroform, formic acid, methanol, water, sparingly soluble in dehydrated alcohol and insoluble in ether. It has a molecular weight of 450.98 g/mol. Each Diltiazem Hydrochloride Extended-Release Capsules, USP contains either 60 mg diltiazem hydrochloride (equivalent to 55.1 mg diltiazem), 90 mg diltiazem hydrochloride (equivalent to 82.7 mg diltiazem), or 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem). Also contains: Diethyl phthalate, ethyl cellulose, methacrylic acid and ethyl acrylate copolymer, polysorbate, povidone, sodium lauryl sulfate, sugar spheres (corn starch, hypromellose and sucrose) and talc. The capsule shells contain D&C Yellow No. 10 (90 mg only), FD&C Red No. 3, FD&C Red No.40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The black printing ink contains black iron oxide, potassium hydroxide and shellac. For oral administration. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
</NDCList>