{
"NDC": [
{
"NDCCode": "68737-227-11",
"PackageDescription": "50 POUCH in 1 BOX (68737-227-11) > 2 TABLET in 1 POUCH",
"NDC11Code": "68737-0227-11",
"ProductNDC": "68737-227",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Conrx",
"ProprietaryNameSuffix": "Cold",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, And Phenylephrine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120710",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Eagle Distributors,Inc.",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 10; 200; 5",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "for the temporary relief of the following cold symptoms: minor aches and painsheadachesore throatnasal congestioncoughsinus congestion and pressure. helps loosen phlegm (mucus) and thin bronchial secretions to make coughs more productive."
},
{
"NDCCode": "42571-227-11",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (42571-227-11) / 10 TABLET in 1 BLISTER PACK (42571-227-32) ",
"NDC11Code": "42571-0227-11",
"ProductNDC": "42571-227",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207016",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan is an angiotensin II receptor blocker (ARB) indicated for:.",
"Description": "Telmisartan tablets, USP is a non-peptide angiotensin II receptor (type AT 1) antagonist. Telmisartan is chemically described as 4'-[(1,4’-dimethyl-2'-propyl [2,6'-bi-1 H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C 33H 30N 4O 2, its molecular weight is 514.62, and its structural formula is:. Telmisartan USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan USP is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: crospovidone Type A/kollidon CL, mannitol, magnesium stearate, meglumine, povidone K-30, and sodium hydroxide. Telmisartan tablets USP are hygroscopic and require protection from moisture."
},
{
"NDCCode": "60687-227-94",
"PackageDescription": "20 BLISTER PACK in 1 BOX, UNIT-DOSE (60687-227-94) / 1 TABLET in 1 BLISTER PACK (60687-227-11) ",
"NDC11Code": "60687-0227-94",
"ProductNDC": "60687-227",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leucovorin Calcium",
"NonProprietaryName": "Leucovorin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071199",
"LabelerName": "American Health Packaging",
"SubstanceName": "LEUCOVORIN CALCIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Folate Analog [EPC], Folic Acid [CS]",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170217",
"SamplePackage": "N",
"IndicationAndUsage": "Leucovorin calcium tablets are indicated to diminish the toxicity and counteract the effects of impaired methotrexate elimination and of inadvertent overdosages of folic acid antagonists.",
"Description": "Leucovorin calcium tablets, USP contain either 5 mg or 25 mg leucovorin as the calcium salt of N-[4-[[(2-amino-5-formyl-1,4,5,6,7,8-hexahydro-4-oxo-6-pteridinyl)methyl] amino]benzoyl]- L-glutamic acid. This is equivalent to 5.4 mg or 27.01 mg of anhydrous leucovorin calcium, respectively. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 25 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. Leucovorin is a water soluble form of reduced folate in the folate group; it is useful as an antidote to drugs which act as folic acid antagonists. These tablets are intended for oral administration only. The structural formula is as follows. C 20H 21CaN 7O 7 M.W. 511.5."
},
{
"NDCCode": "68084-227-01",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (68084-227-01) > 1 TABLET in 1 BLISTER PACK (68084-227-11)",
"NDC11Code": "68084-0227-01",
"ProductNDC": "68084-227",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Ibuprofen",
"NonProprietaryName": "Hydrocodone Bitartrate And Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091215",
"EndMarketingDate": "20161006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076642",
"LabelerName": "American Health Packaging",
"SubstanceName": "HYDROCODONE BITARTRATE; IBUPROFEN",
"StrengthNumber": "7.5; 200",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA],Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "68428-227-11",
"PackageDescription": "300 PELLET in 1 BOTTLE, GLASS (68428-227-11) ",
"NDC11Code": "68428-0227-11",
"ProductNDC": "68428-227",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Arsenicum Iodatum",
"NonProprietaryName": "Arsenic Triiodide",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080102",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "ARSENIC TRIIODIDE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2022-04-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20080102",
"SamplePackage": "N"
},
{
"NDCCode": "69980-102-11",
"PackageDescription": "227 mL in 1 BOTTLE (69980-102-11) ",
"NDC11Code": "69980-0102-11",
"ProductNDC": "69980-102",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Freeze Cooling Pain Relief",
"NonProprietaryName": "Freeze Cooling Pain Relief",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part356",
"LabelerName": "Shandong Vianor Healthy Science Co.,Ltd.",
"SubstanceName": "MENTHOL",
"StrengthNumber": "4",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200330",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and children 12 years and older: Apply a small amount to the affected area and massage gently, no more han 4 times per day. Wash hands with cool water after use."
},
{
"NDCCode": "68737-238-22",
"PackageDescription": "50 POUCH in 1 BOX (68737-238-22) > 2 TABLET in 1 POUCH",
"NDC11Code": "68737-0238-22",
"ProductNDC": "68737-238",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Conrx Daytime",
"NonProprietaryName": "Phenylephrine Hydrochloride, Acetaminophen, Dextromethorphan Hydrobromide, And Guaifenesin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140131",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Eagle Distributors,Inc",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE; ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN",
"StrengthNumber": "5; 325; 10; 200",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "temporarily relieves common cold/flu symptoms: 1 nasal congestion, 2 sinus congestion & pressure , 3 cough due to minor , 4 throat & bronchial irritation, 5 minor aches & pains, 6 headache, 7 fever, 8 sore throat , 9 reduces swelling of nasal passages , 10 temporarily restores freer breathing through the nose, 11 promotes nasal and/or sinus drainage, 12 helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive."
},
{
"NDCCode": "0003-3622-12",
"PackageDescription": "30 CAPSULE, GELATIN COATED in 1 BOTTLE, PLASTIC (0003-3622-12) ",
"NDC11Code": "00003-3622-12",
"ProductNDC": "0003-3622",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Reyataz",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20030624",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021567",
"LabelerName": "E.R. Squibb & Sons, L.L.C.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20030624",
"SamplePackage": "N",
"IndicationAndUsage": "REYATAZ® is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 REYATAZ is not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of REYATAZ with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].",
"Description": "The active ingredient in REYATAZ capsules and oral powder is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4-5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. REYATAZ Capsules are available for oral administration in strengths of 200 mg or 300 mg of atazanavir, which are equivalent to 227.8 mg or 341.69 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue No. 2, titanium dioxide, black iron oxide, red iron oxide, and yellow iron oxide. The capsules are printed with ink containing shellac, titanium dioxide, FD&C Blue No. 2, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol, simethicone, and dehydrated alcohol. REYATAZ oral powder comes in a packet containing 50 mg of atazanavir equivalent to 56.9 mg of atazanavir sulfate in 1.5 g of powder. The powder is off-white to pale yellow and contains the following inactive ingredients: aspartame, sucrose, and orange-vanilla flavor."
},
{
"NDCCode": "0003-3631-12",
"PackageDescription": "60 CAPSULE, GELATIN COATED in 1 BOTTLE, PLASTIC (0003-3631-12) ",
"NDC11Code": "00003-3631-12",
"ProductNDC": "0003-3631",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Reyataz",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20030624",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021567",
"LabelerName": "E.R. Squibb & Sons, L.L.C.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20030624",
"SamplePackage": "N",
"IndicationAndUsage": "REYATAZ® is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 REYATAZ is not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of REYATAZ with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].",
"Description": "The active ingredient in REYATAZ capsules and oral powder is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4-5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. REYATAZ Capsules are available for oral administration in strengths of 200 mg or 300 mg of atazanavir, which are equivalent to 227.8 mg or 341.69 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue No. 2, titanium dioxide, black iron oxide, red iron oxide, and yellow iron oxide. The capsules are printed with ink containing shellac, titanium dioxide, FD&C Blue No. 2, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol, simethicone, and dehydrated alcohol. REYATAZ oral powder comes in a packet containing 50 mg of atazanavir equivalent to 56.9 mg of atazanavir sulfate in 1.5 g of powder. The powder is off-white to pale yellow and contains the following inactive ingredients: aspartame, sucrose, and orange-vanilla flavor."
},
{
"NDCCode": "0003-3638-10",
"PackageDescription": "30 PACKET in 1 CARTON (0003-3638-10) / 1 POWDER in 1 PACKET",
"NDC11Code": "00003-3638-10",
"ProductNDC": "0003-3638",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Reyataz",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "POWDER",
"RouteName": "ORAL",
"StartMarketingDate": "20141219",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA206352",
"LabelerName": "E.R. Squibb & Sons, L.L.C.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141219",
"SamplePackage": "N",
"IndicationAndUsage": "REYATAZ® is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 REYATAZ is not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of REYATAZ with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].",
"Description": "The active ingredient in REYATAZ capsules and oral powder is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4-5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. REYATAZ Capsules are available for oral administration in strengths of 200 mg or 300 mg of atazanavir, which are equivalent to 227.8 mg or 341.69 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue No. 2, titanium dioxide, black iron oxide, red iron oxide, and yellow iron oxide. The capsules are printed with ink containing shellac, titanium dioxide, FD&C Blue No. 2, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol, simethicone, and dehydrated alcohol. REYATAZ oral powder comes in a packet containing 50 mg of atazanavir equivalent to 56.9 mg of atazanavir sulfate in 1.5 g of powder. The powder is off-white to pale yellow and contains the following inactive ingredients: aspartame, sucrose, and orange-vanilla flavor."
},
{
"NDCCode": "0093-5526-06",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (0093-5526-06) ",
"NDC11Code": "00093-5526-06",
"ProductNDC": "0093-5526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir Sulfate",
"NonProprietaryName": "Atazanavir Sulfate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091673",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171227",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of atazanavir capsules with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, USP, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate, USP is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8 hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13 pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7●H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate, USP has the following structural formula. Atazanavir sulfate, USP is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3○C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.8 mg, 227.8 mg, or 341.69 mg of atazanavir sulfate, USP, respectively. The capsules contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C Blue No. 1, gelatin, and titanium dioxide. The 300 mg capsule shells also contain FD&C Red No. 40. The capsules are printed with black ink containing D&C Yellow No. 10 aluminum lake, FD&C Blue No. 1 aluminum lake, FD&C Blue No. 2 aluminum lake, FD&C Red No. 40 aluminum lake, iron oxide black, shellac, and may contain propylene glycol."
},
{
"NDCCode": "0093-5527-06",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (0093-5527-06) ",
"NDC11Code": "00093-5527-06",
"ProductNDC": "0093-5527",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir Sulfate",
"NonProprietaryName": "Atazanavir Sulfate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091673",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171227",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of atazanavir capsules with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, USP, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate, USP is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8 hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13 pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7●H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate, USP has the following structural formula. Atazanavir sulfate, USP is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3○C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.8 mg, 227.8 mg, or 341.69 mg of atazanavir sulfate, USP, respectively. The capsules contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C Blue No. 1, gelatin, and titanium dioxide. The 300 mg capsule shells also contain FD&C Red No. 40. The capsules are printed with black ink containing D&C Yellow No. 10 aluminum lake, FD&C Blue No. 1 aluminum lake, FD&C Blue No. 2 aluminum lake, FD&C Red No. 40 aluminum lake, iron oxide black, shellac, and may contain propylene glycol."
},
{
"NDCCode": "0093-5528-56",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (0093-5528-56) ",
"NDC11Code": "00093-5528-56",
"ProductNDC": "0093-5528",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir Sulfate",
"NonProprietaryName": "Atazanavir Sulfate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091673",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171227",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of atazanavir capsules with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, USP, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate, USP is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8 hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13 pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7●H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate, USP has the following structural formula. Atazanavir sulfate, USP is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3○C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.8 mg, 227.8 mg, or 341.69 mg of atazanavir sulfate, USP, respectively. The capsules contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C Blue No. 1, gelatin, and titanium dioxide. The 300 mg capsule shells also contain FD&C Red No. 40. The capsules are printed with black ink containing D&C Yellow No. 10 aluminum lake, FD&C Blue No. 1 aluminum lake, FD&C Blue No. 2 aluminum lake, FD&C Red No. 40 aluminum lake, iron oxide black, shellac, and may contain propylene glycol."
},
{
"NDCCode": "0159-2400-24",
"PackageDescription": "227 g in 1 BOTTLE (0159-2400-24)",
"NDC11Code": "00159-2400-24",
"ProductNDC": "0159-2400",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Selan Plus Zinc",
"NonProprietaryName": "Selan Plus Zinc",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "19970829",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Trividia Manufacturing Solutions, Inc",
"SubstanceName": "DIMETHICONE; ZINC OXIDE",
"StrengthNumber": "2.3; 2",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2018-11-17",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0186-0370-20",
"PackageDescription": "1 POUCH in 1 CARTON (0186-0370-20) / 1 CANISTER in 1 POUCH / 120 AEROSOL in 1 CANISTER",
"NDC11Code": "00186-0370-20",
"ProductNDC": "0186-0370",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Symbicort",
"NonProprietaryName": "Budesonide And Formoterol Fumarate Dihydrate",
"DosageFormName": "AEROSOL",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20070529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021929",
"LabelerName": "AstraZeneca Pharmaceuticals LP",
"SubstanceName": "BUDESONIDE; FORMOTEROL FUMARATE",
"StrengthNumber": "160; 4.5",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070529",
"SamplePackage": "N",
"IndicationAndUsage": "SYMBICORT is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist indicated for: 1 Treatment of asthma in patients 6 years of age and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD) including chronic bronchitis and/or emphysema. (1.2).",
"Description": "SYMBICORT 80/4.5 and SYMBICORT 160/4.5 each contain micronized budesonide and micronized formoterol fumarate dihydrate for oral inhalation only. Each SYMBICORT 80/4.5 and SYMBICORT 160/4.5 canister is formulated as a hydrofluoroalkane (HFA 227; 1,1,1,2,3,3,3-heptafluoropropane)-propelled pressurized metered dose inhaler containing either 60 or 120 actuations [see Dosage Forms and Strengths (3) and How Supplied/Storage and Handling (16)]. After priming, each actuation meters either 91/5.1 mcg or 181/5.1 mcg from the valve and delivers either 80/4.5 mcg, or 160/4.5 mcg (budesonide micronized/formoterol fumarate dihydrate micronized) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. SYMBICORT also contains povidone K25 USP as a suspending agent and polyethylene glycol 1000 NF as a lubricant. SYMBICORT should be primed before using for the first time by releasing two test sprays into the air away from the face, shaking well for 5 seconds before each spray. In cases where the inhaler has not been used for more than 7 days or when it has been dropped, prime the inhaler again by shaking well for 5 seconds before each spray and releasing two test sprays into the air away from the face. One active component of SYMBICORT is budesonide, a corticosteroid designated chemically as (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder which is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. The other active component of SYMBICORT is formoterol fumarate dihydrate, a selective beta2-agonist designated chemically as (R*,R*)-(±)-N-[2-hydroxy-5-[1-hydroxy-2-[[2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]formamide, (E)-2-butendioate(2:1), dihydrate. The empirical formula of formoterol is C42H56N4O14 and its molecular weight is 840.9. Its structural formula is. Formoterol fumarate dihydrate is a powder which is slightly soluble in water. Its octanol-water partition coefficient at pH 7.4 is 2.6. The pKa of formoterol fumarate dihydrate at 25°C is 7.9 for the phenolic group and 9.2 for the amino group."
},
{
"NDCCode": "0186-0370-28",
"PackageDescription": "1 POUCH in 1 CARTON (0186-0370-28) / 1 CANISTER in 1 POUCH / 60 AEROSOL in 1 CANISTER",
"NDC11Code": "00186-0370-28",
"ProductNDC": "0186-0370",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Symbicort",
"NonProprietaryName": "Budesonide And Formoterol Fumarate Dihydrate",
"DosageFormName": "AEROSOL",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20070529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021929",
"LabelerName": "AstraZeneca Pharmaceuticals LP",
"SubstanceName": "BUDESONIDE; FORMOTEROL FUMARATE",
"StrengthNumber": "160; 4.5",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070906",
"SamplePackage": "N",
"IndicationAndUsage": "SYMBICORT is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist indicated for: 1 Treatment of asthma in patients 6 years of age and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD) including chronic bronchitis and/or emphysema. (1.2).",
"Description": "SYMBICORT 80/4.5 and SYMBICORT 160/4.5 each contain micronized budesonide and micronized formoterol fumarate dihydrate for oral inhalation only. Each SYMBICORT 80/4.5 and SYMBICORT 160/4.5 canister is formulated as a hydrofluoroalkane (HFA 227; 1,1,1,2,3,3,3-heptafluoropropane)-propelled pressurized metered dose inhaler containing either 60 or 120 actuations [see Dosage Forms and Strengths (3) and How Supplied/Storage and Handling (16)]. After priming, each actuation meters either 91/5.1 mcg or 181/5.1 mcg from the valve and delivers either 80/4.5 mcg, or 160/4.5 mcg (budesonide micronized/formoterol fumarate dihydrate micronized) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. SYMBICORT also contains povidone K25 USP as a suspending agent and polyethylene glycol 1000 NF as a lubricant. SYMBICORT should be primed before using for the first time by releasing two test sprays into the air away from the face, shaking well for 5 seconds before each spray. In cases where the inhaler has not been used for more than 7 days or when it has been dropped, prime the inhaler again by shaking well for 5 seconds before each spray and releasing two test sprays into the air away from the face. One active component of SYMBICORT is budesonide, a corticosteroid designated chemically as (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder which is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. The other active component of SYMBICORT is formoterol fumarate dihydrate, a selective beta2-agonist designated chemically as (R*,R*)-(±)-N-[2-hydroxy-5-[1-hydroxy-2-[[2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]formamide, (E)-2-butendioate(2:1), dihydrate. The empirical formula of formoterol is C42H56N4O14 and its molecular weight is 840.9. Its structural formula is. Formoterol fumarate dihydrate is a powder which is slightly soluble in water. Its octanol-water partition coefficient at pH 7.4 is 2.6. The pKa of formoterol fumarate dihydrate at 25°C is 7.9 for the phenolic group and 9.2 for the amino group."
},
{
"NDCCode": "0186-0372-20",
"PackageDescription": "1 POUCH in 1 CARTON (0186-0372-20) / 1 CANISTER in 1 POUCH / 120 AEROSOL in 1 CANISTER",
"NDC11Code": "00186-0372-20",
"ProductNDC": "0186-0372",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Symbicort",
"NonProprietaryName": "Budesonide And Formoterol Fumarate Dihydrate",
"DosageFormName": "AEROSOL",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20070529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021929",
"LabelerName": "AstraZeneca Pharmaceuticals LP",
"SubstanceName": "BUDESONIDE; FORMOTEROL FUMARATE",
"StrengthNumber": "80; 4.5",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070529",
"SamplePackage": "N",
"IndicationAndUsage": "SYMBICORT is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist indicated for: 1 Treatment of asthma in patients 6 years of age and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD) including chronic bronchitis and/or emphysema. (1.2).",
"Description": "SYMBICORT 80/4.5 and SYMBICORT 160/4.5 each contain micronized budesonide and micronized formoterol fumarate dihydrate for oral inhalation only. Each SYMBICORT 80/4.5 and SYMBICORT 160/4.5 canister is formulated as a hydrofluoroalkane (HFA 227; 1,1,1,2,3,3,3-heptafluoropropane)-propelled pressurized metered dose inhaler containing either 60 or 120 actuations [see Dosage Forms and Strengths (3) and How Supplied/Storage and Handling (16)]. After priming, each actuation meters either 91/5.1 mcg or 181/5.1 mcg from the valve and delivers either 80/4.5 mcg, or 160/4.5 mcg (budesonide micronized/formoterol fumarate dihydrate micronized) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. SYMBICORT also contains povidone K25 USP as a suspending agent and polyethylene glycol 1000 NF as a lubricant. SYMBICORT should be primed before using for the first time by releasing two test sprays into the air away from the face, shaking well for 5 seconds before each spray. In cases where the inhaler has not been used for more than 7 days or when it has been dropped, prime the inhaler again by shaking well for 5 seconds before each spray and releasing two test sprays into the air away from the face. One active component of SYMBICORT is budesonide, a corticosteroid designated chemically as (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder which is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. The other active component of SYMBICORT is formoterol fumarate dihydrate, a selective beta2-agonist designated chemically as (R*,R*)-(±)-N-[2-hydroxy-5-[1-hydroxy-2-[[2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]formamide, (E)-2-butendioate(2:1), dihydrate. The empirical formula of formoterol is C42H56N4O14 and its molecular weight is 840.9. Its structural formula is. Formoterol fumarate dihydrate is a powder which is slightly soluble in water. Its octanol-water partition coefficient at pH 7.4 is 2.6. The pKa of formoterol fumarate dihydrate at 25°C is 7.9 for the phenolic group and 9.2 for the amino group."
},
{
"NDCCode": "0186-0372-28",
"PackageDescription": "1 POUCH in 1 CARTON (0186-0372-28) / 1 CANISTER in 1 POUCH / 60 AEROSOL in 1 CANISTER",
"NDC11Code": "00186-0372-28",
"ProductNDC": "0186-0372",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Symbicort",
"NonProprietaryName": "Budesonide And Formoterol Fumarate Dihydrate",
"DosageFormName": "AEROSOL",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20070529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021929",
"LabelerName": "AstraZeneca Pharmaceuticals LP",
"SubstanceName": "BUDESONIDE; FORMOTEROL FUMARATE",
"StrengthNumber": "80; 4.5",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070906",
"SamplePackage": "N",
"IndicationAndUsage": "SYMBICORT is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist indicated for: 1 Treatment of asthma in patients 6 years of age and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD) including chronic bronchitis and/or emphysema. (1.2).",
"Description": "SYMBICORT 80/4.5 and SYMBICORT 160/4.5 each contain micronized budesonide and micronized formoterol fumarate dihydrate for oral inhalation only. Each SYMBICORT 80/4.5 and SYMBICORT 160/4.5 canister is formulated as a hydrofluoroalkane (HFA 227; 1,1,1,2,3,3,3-heptafluoropropane)-propelled pressurized metered dose inhaler containing either 60 or 120 actuations [see Dosage Forms and Strengths (3) and How Supplied/Storage and Handling (16)]. After priming, each actuation meters either 91/5.1 mcg or 181/5.1 mcg from the valve and delivers either 80/4.5 mcg, or 160/4.5 mcg (budesonide micronized/formoterol fumarate dihydrate micronized) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. SYMBICORT also contains povidone K25 USP as a suspending agent and polyethylene glycol 1000 NF as a lubricant. SYMBICORT should be primed before using for the first time by releasing two test sprays into the air away from the face, shaking well for 5 seconds before each spray. In cases where the inhaler has not been used for more than 7 days or when it has been dropped, prime the inhaler again by shaking well for 5 seconds before each spray and releasing two test sprays into the air away from the face. One active component of SYMBICORT is budesonide, a corticosteroid designated chemically as (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder which is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. The other active component of SYMBICORT is formoterol fumarate dihydrate, a selective beta2-agonist designated chemically as (R*,R*)-(±)-N-[2-hydroxy-5-[1-hydroxy-2-[[2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]formamide, (E)-2-butendioate(2:1), dihydrate. The empirical formula of formoterol is C42H56N4O14 and its molecular weight is 840.9. Its structural formula is. Formoterol fumarate dihydrate is a powder which is slightly soluble in water. Its octanol-water partition coefficient at pH 7.4 is 2.6. The pKa of formoterol fumarate dihydrate at 25°C is 7.9 for the phenolic group and 9.2 for the amino group."
},
{
"NDCCode": "0378-9102-93",
"PackageDescription": "30 POUCH in 1 CARTON (0378-9102-93) > 1 PATCH in 1 POUCH (0378-9102-16) > 14 h in 1 PATCH",
"NDC11Code": "00378-9102-93",
"ProductNDC": "0378-9102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19980618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074559",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": ".1",
"StrengthUnit": "mg/h",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2018-11-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980618",
"SamplePackage": "N",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol, trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The nitroglycerin transdermal system is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately 0.026 mg of nitroglycerin per hour. Thus, the 4 cm2, 8 cm2, 16 cm2 and 24 cm2 systems deliver approximately 0.1 mg, 0.2 mg, 0.4 mg and 0.6 mg of nitroglycerin per hour, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 11% of its original content of nitroglycerin. The nitroglycerin transdermal system comprises two layers as shown below. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1) a polyolefin film backing layer that is impermeable to nitroglycerin and is printed with the name of the drug and strength; 2) nitroglycerin in an acrylic pressure sensitive adhesive. Prior to use, a peelable polyester release liner, which is coated on one side with silicone, is removed from the adhesive surface. Each unit is sealed in a foil-lined pouch. Cross section of the system."
},
{
"NDCCode": "0378-9104-93",
"PackageDescription": "30 POUCH in 1 CARTON (0378-9104-93) > 1 PATCH in 1 POUCH (0378-9104-16) > 14 h in 1 PATCH",
"NDC11Code": "00378-9104-93",
"ProductNDC": "0378-9104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19960830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074559",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": ".2",
"StrengthUnit": "mg/h",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2018-11-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19960830",
"SamplePackage": "N",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol, trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The nitroglycerin transdermal system is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately 0.026 mg of nitroglycerin per hour. Thus, the 4 cm2, 8 cm2, 16 cm2 and 24 cm2 systems deliver approximately 0.1 mg, 0.2 mg, 0.4 mg and 0.6 mg of nitroglycerin per hour, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 11% of its original content of nitroglycerin. The nitroglycerin transdermal system comprises two layers as shown below. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1) a polyolefin film backing layer that is impermeable to nitroglycerin and is printed with the name of the drug and strength; 2) nitroglycerin in an acrylic pressure sensitive adhesive. Prior to use, a peelable polyester release liner, which is coated on one side with silicone, is removed from the adhesive surface. Each unit is sealed in a foil-lined pouch. Cross section of the system."
},
{
"NDCCode": "0378-9112-93",
"PackageDescription": "30 POUCH in 1 CARTON (0378-9112-93) > 1 PATCH in 1 POUCH (0378-9112-16) > 14 h in 1 PATCH",
"NDC11Code": "00378-9112-93",
"ProductNDC": "0378-9112",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19960830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074559",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": ".4",
"StrengthUnit": "mg/h",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2018-11-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19960830",
"SamplePackage": "N",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol, trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The nitroglycerin transdermal system is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately 0.026 mg of nitroglycerin per hour. Thus, the 4 cm2, 8 cm2, 16 cm2 and 24 cm2 systems deliver approximately 0.1 mg, 0.2 mg, 0.4 mg and 0.6 mg of nitroglycerin per hour, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 11% of its original content of nitroglycerin. The nitroglycerin transdermal system comprises two layers as shown below. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1) a polyolefin film backing layer that is impermeable to nitroglycerin and is printed with the name of the drug and strength; 2) nitroglycerin in an acrylic pressure sensitive adhesive. Prior to use, a peelable polyester release liner, which is coated on one side with silicone, is removed from the adhesive surface. Each unit is sealed in a foil-lined pouch. Cross section of the system."
},
{
"NDCCode": "0378-9116-93",
"PackageDescription": "30 POUCH in 1 CARTON (0378-9116-93) > 1 PATCH in 1 POUCH (0378-9116-16) > 14 h in 1 PATCH",
"NDC11Code": "00378-9116-93",
"ProductNDC": "0378-9116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19960830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074559",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": ".6",
"StrengthUnit": "mg/h",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2018-11-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19960830",
"SamplePackage": "N",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol, trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The nitroglycerin transdermal system is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately 0.026 mg of nitroglycerin per hour. Thus, the 4 cm2, 8 cm2, 16 cm2 and 24 cm2 systems deliver approximately 0.1 mg, 0.2 mg, 0.4 mg and 0.6 mg of nitroglycerin per hour, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 11% of its original content of nitroglycerin. The nitroglycerin transdermal system comprises two layers as shown below. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1) a polyolefin film backing layer that is impermeable to nitroglycerin and is printed with the name of the drug and strength; 2) nitroglycerin in an acrylic pressure sensitive adhesive. Prior to use, a peelable polyester release liner, which is coated on one side with silicone, is removed from the adhesive surface. Each unit is sealed in a foil-lined pouch. Cross section of the system."
},
{
"NDCCode": "0404-9928-10",
"PackageDescription": "1 VIAL in 1 BAG (0404-9928-10) / 10 mL in 1 VIAL",
"NDC11Code": "00404-9928-10",
"ProductNDC": "0404-9928",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072034",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-11-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220113",
"SamplePackage": "N",
"IndicationAndUsage": "Nitroglycerin Injection is indicated for treatment of peri-operative hypertension; for control of congestive heart failure in the setting of acute myocardial infarction;for treatment of angina pectoris in patients who have not responded to sublingual nitroglycerin and b-blockers; and for induction of intraoperative hypotension.",
"Description": "Rx Only. FOR INTRAVENOUS USE ONLY. NOT FOR DIRECT INTRAVENOUS INJECTION. NITROGLYCERIN INJECTION MUST BE DILUTED IN DEXTROSE (5%) INJECTION OR SODIUM CHLORIDE (0.9%) INJECTION PRIOR TO ITS INFUSION (SEE DOSAGE AND ADMINISTRATION SECTION). THE ADMINISTRATION SET USED FOR INFUSION WILL AFFECT THE AMOUNT OF NITROGLYCERIN INJECTION DELIVERED TO THE PATIENT. (SEE WARNINGS, AND DOSAGE AND ADMINISTRATION SECTIONS). CAUTIONSEVERAL PREPARATIONS OF NITROGLYCERIN FOR INJECTION ARE AVAILABLE. THEY DIFFER IN CONCENTRATION AND/OR VOLUME PER VIAL. WHEN SWITCHING FROM ONE PRODUCT TO ANOTHER, ATTENTION MUST BE PAID TO THE DILUTION AND DOSAGE AND ADMINISTRATION INSTRUCTIONS. DESCRIPTION:Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. whose empiric formula is C3H5N3O9, and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins.Nitroglycerin Injection, USP is a clear, practically colorless additive solution for intravenous infusion after dilution. Each mL contains: Nitroglycerin 5 mg, Alcohol 30% (v/v), Propylene Glycol 30%, and Water for Injection q.s. pH (range 3.0 to 6.5) may have been adjusted with Sodium Hydroxide and/or Hydrochloric Acid.The solution is sterile, non-pyrogenic, and nonexplosive."
},
{
"NDCCode": "11084-909-17",
"PackageDescription": "1 CAN in 1 KIT (11084-909-17) / 227 g in 1 CAN",
"NDC11Code": "11084-0909-17",
"ProductNDC": "11084-909",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Alcare Plus Foaming Antiseptic Handrub",
"NonProprietaryName": "Alcohol",
"DosageFormName": "AEROSOL, FOAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250801",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "SC Johnson Professional USA Inc",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "59.7",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251101",
"SamplePackage": "N",
"IndicationAndUsage": "Surgical Scrub significantly reduces the number of micro-organisms on the hands and forearms prior to surgery or patient care. Healthcare Personnel Handwash to decrease transient bacteria on the skin before contact with patients under medical care or treatment."
},
{
"NDCCode": "11084-909-18",
"PackageDescription": "2 CAN in 1 BOX (11084-909-18) / 227 g in 1 CAN",
"NDC11Code": "11084-0909-18",
"ProductNDC": "11084-909",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Alcare Plus Foaming Antiseptic Handrub",
"NonProprietaryName": "Alcohol",
"DosageFormName": "AEROSOL, FOAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250801",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "SC Johnson Professional USA Inc",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "59.7",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251101",
"SamplePackage": "N",
"IndicationAndUsage": "Surgical Scrub significantly reduces the number of micro-organisms on the hands and forearms prior to surgery or patient care. Healthcare Personnel Handwash to decrease transient bacteria on the skin before contact with patients under medical care or treatment."
},
{
"NDCCode": "12090-0016-3",
"PackageDescription": "227 g in 1 JAR (12090-0016-3)",
"NDC11Code": "12090-0016-03",
"ProductNDC": "12090-0016",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lantiseptic",
"ProprietaryNameSuffix": "Dry Skin Therapy",
"NonProprietaryName": "Lanolin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Summit Industries, Inc.",
"SubstanceName": "LANOLIN",
"StrengthNumber": "370",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2016-03-11"
},
{
"NDCCode": "12090-0040-6",
"PackageDescription": "227 g in 1 JAR (12090-0040-6)",
"NDC11Code": "12090-0040-06",
"ProductNDC": "12090-0040",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lantiseptic",
"ProprietaryNameSuffix": "Daily Care Skin Protectant",
"NonProprietaryName": "Lanolin",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Summit Industries, Inc.",
"SubstanceName": "LANOLIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2016-03-11"
},
{
"NDCCode": "13709-357-01",
"PackageDescription": "1 TUBE in 1 CARTON (13709-357-01) / 227 g in 1 TUBE",
"NDC11Code": "13709-0357-01",
"ProductNDC": "13709-357",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Menthol Pain Relieving Gel",
"NonProprietaryName": "Pain Relieving Gel",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260507",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M014",
"LabelerName": "NeilMed Pharmaceuticals Inc",
"SubstanceName": "MENTHOL",
"StrengthNumber": "4.54",
"StrengthUnit": "g/227g",
"Status": "Active",
"LastUpdate": "2026-05-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260507",
"SamplePackage": "N",
"IndicationAndUsage": "Cooling, Pain relieving gel for muscle aches. arthiritis pain. simple backache."
},
{
"NDCCode": "14448-316-00",
"PackageDescription": "227 g in 1 JAR (14448-316-00) ",
"NDC11Code": "14448-0316-00",
"ProductNDC": "14448-316",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Blue Spring Foot And Leg Comfort Cream With Pain Relief",
"NonProprietaryName": "Menthol, Capsaicin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20211025",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "BLUE SPRING WELLNESS, L.L.C.",
"SubstanceName": "MENTHOL; CAPSAICIN",
"StrengthNumber": "15; .25",
"StrengthUnit": "mg/g; mg/g",
"Status": "Active",
"LastUpdate": "2023-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211025",
"SamplePackage": "N",
"IndicationAndUsage": "Temporary relief of minor aches and pains of muscles and joints."
},
{
"NDCCode": "16477-341-08",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (16477-341-08) / 227 g in 1 BOTTLE, PLASTIC",
"NDC11Code": "16477-0341-08",
"ProductNDC": "16477-341",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Urea Cream 41%",
"NonProprietaryName": "Urea",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180504",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Laser Pharmaceuticals, LLC",
"SubstanceName": "UREA",
"StrengthNumber": "410",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2025-11-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180504",
"SamplePackage": "N",
"IndicationAndUsage": "Indications and Usage. For debridement and promotion of normal healing of hyperkeratotic surface lesions, particularly where healing is retarded by local infection, necrotic tissue, fibrinous or purulent debris or eshar. Urea is useful for the treatment of hyperkeratotic conditions such as dry, rough skin, dermatitis, psoriasis, xerosis, ichthyosis, eczema, keratosis pilaris, keratosis palmaris, keratoderma, corns and calluses, as well as damaged, ingrown and devitalized nails.",
"Description": "Description. Urea 41% is a keratolytic emollient which is a gentle, yet potent, tissue softener for nails and/or skin. Each gram of Urea 41% contains 41% urea as an active ingredient, and the following inactive ingredients: Ceteareth-6, Ceteareth-25, Cetyl Alcohol, Mineral Oil, Propylene Glycol, Purified Water, Sodium Hydroxide, Stearyl Alcohol, Xanthan Gum. Urea is a diamide of carbonic acid with the following chemical structure."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68737-227-11</NDCCode>
<PackageDescription>50 POUCH in 1 BOX (68737-227-11) > 2 TABLET in 1 POUCH</PackageDescription>
<NDC11Code>68737-0227-11</NDC11Code>
<ProductNDC>68737-227</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Conrx</ProprietaryName>
<ProprietaryNameSuffix>Cold</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, And Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120710</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Eagle Distributors,Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 10; 200; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>for the temporary relief of the following cold symptoms: minor aches and painsheadachesore throatnasal congestioncoughsinus congestion and pressure. helps loosen phlegm (mucus) and thin bronchial secretions to make coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42571-227-11</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (42571-227-11) / 10 TABLET in 1 BLISTER PACK (42571-227-32) </PackageDescription>
<NDC11Code>42571-0227-11</NDC11Code>
<ProductNDC>42571-227</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207016</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan is an angiotensin II receptor blocker (ARB) indicated for:.</IndicationAndUsage>
<Description>Telmisartan tablets, USP is a non-peptide angiotensin II receptor (type AT 1) antagonist. Telmisartan is chemically described as 4'-[(1,4’-dimethyl-2'-propyl [2,6'-bi-1 H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C 33H 30N 4O 2, its molecular weight is 514.62, and its structural formula is:. Telmisartan USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan USP is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: crospovidone Type A/kollidon CL, mannitol, magnesium stearate, meglumine, povidone K-30, and sodium hydroxide. Telmisartan tablets USP are hygroscopic and require protection from moisture.</Description>
</NDC>
<NDC>
<NDCCode>60687-227-94</NDCCode>
<PackageDescription>20 BLISTER PACK in 1 BOX, UNIT-DOSE (60687-227-94) / 1 TABLET in 1 BLISTER PACK (60687-227-11) </PackageDescription>
<NDC11Code>60687-0227-94</NDC11Code>
<ProductNDC>60687-227</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leucovorin Calcium</ProprietaryName>
<NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071199</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Leucovorin calcium tablets are indicated to diminish the toxicity and counteract the effects of impaired methotrexate elimination and of inadvertent overdosages of folic acid antagonists.</IndicationAndUsage>
<Description>Leucovorin calcium tablets, USP contain either 5 mg or 25 mg leucovorin as the calcium salt of N-[4-[[(2-amino-5-formyl-1,4,5,6,7,8-hexahydro-4-oxo-6-pteridinyl)methyl] amino]benzoyl]- L-glutamic acid. This is equivalent to 5.4 mg or 27.01 mg of anhydrous leucovorin calcium, respectively. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 25 mg tablet also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. Leucovorin is a water soluble form of reduced folate in the folate group; it is useful as an antidote to drugs which act as folic acid antagonists. These tablets are intended for oral administration only. The structural formula is as follows. C 20H 21CaN 7O 7 M.W. 511.5.</Description>
</NDC>
<NDC>
<NDCCode>68084-227-01</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (68084-227-01) > 1 TABLET in 1 BLISTER PACK (68084-227-11)</PackageDescription>
<NDC11Code>68084-0227-01</NDC11Code>
<ProductNDC>68084-227</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Ibuprofen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091215</StartMarketingDate>
<EndMarketingDate>20161006</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076642</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; IBUPROFEN</SubstanceName>
<StrengthNumber>7.5; 200</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA],Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>68428-227-11</NDCCode>
<PackageDescription>300 PELLET in 1 BOTTLE, GLASS (68428-227-11) </PackageDescription>
<NDC11Code>68428-0227-11</NDC11Code>
<ProductNDC>68428-227</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Arsenicum Iodatum</ProprietaryName>
<NonProprietaryName>Arsenic Triiodide</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080102</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>ARSENIC TRIIODIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-04-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69980-102-11</NDCCode>
<PackageDescription>227 mL in 1 BOTTLE (69980-102-11) </PackageDescription>
<NDC11Code>69980-0102-11</NDC11Code>
<ProductNDC>69980-102</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Freeze Cooling Pain Relief</ProprietaryName>
<NonProprietaryName>Freeze Cooling Pain Relief</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part356</ApplicationNumber>
<LabelerName>Shandong Vianor Healthy Science Co.,Ltd.</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and children 12 years and older: Apply a small amount to the affected area and massage gently, no more han 4 times per day. Wash hands with cool water after use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68737-238-22</NDCCode>
<PackageDescription>50 POUCH in 1 BOX (68737-238-22) > 2 TABLET in 1 POUCH</PackageDescription>
<NDC11Code>68737-0238-22</NDC11Code>
<ProductNDC>68737-238</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Conrx Daytime</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride, Acetaminophen, Dextromethorphan Hydrobromide, And Guaifenesin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140131</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Eagle Distributors,Inc</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE; ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN</SubstanceName>
<StrengthNumber>5; 325; 10; 200</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>temporarily relieves common cold/flu symptoms: 1 nasal congestion, 2 sinus congestion & pressure , 3 cough due to minor , 4 throat & bronchial irritation, 5 minor aches & pains, 6 headache, 7 fever, 8 sore throat , 9 reduces swelling of nasal passages , 10 temporarily restores freer breathing through the nose, 11 promotes nasal and/or sinus drainage, 12 helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0003-3622-12</NDCCode>
<PackageDescription>30 CAPSULE, GELATIN COATED in 1 BOTTLE, PLASTIC (0003-3622-12) </PackageDescription>
<NDC11Code>00003-3622-12</NDC11Code>
<ProductNDC>0003-3622</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Reyataz</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030624</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021567</ApplicationNumber>
<LabelerName>E.R. Squibb & Sons, L.L.C.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030624</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>REYATAZ® is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 REYATAZ is not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of REYATAZ with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].</IndicationAndUsage>
<Description>The active ingredient in REYATAZ capsules and oral powder is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4-5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. REYATAZ Capsules are available for oral administration in strengths of 200 mg or 300 mg of atazanavir, which are equivalent to 227.8 mg or 341.69 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue No. 2, titanium dioxide, black iron oxide, red iron oxide, and yellow iron oxide. The capsules are printed with ink containing shellac, titanium dioxide, FD&C Blue No. 2, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol, simethicone, and dehydrated alcohol. REYATAZ oral powder comes in a packet containing 50 mg of atazanavir equivalent to 56.9 mg of atazanavir sulfate in 1.5 g of powder. The powder is off-white to pale yellow and contains the following inactive ingredients: aspartame, sucrose, and orange-vanilla flavor.</Description>
</NDC>
<NDC>
<NDCCode>0003-3631-12</NDCCode>
<PackageDescription>60 CAPSULE, GELATIN COATED in 1 BOTTLE, PLASTIC (0003-3631-12) </PackageDescription>
<NDC11Code>00003-3631-12</NDC11Code>
<ProductNDC>0003-3631</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Reyataz</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030624</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021567</ApplicationNumber>
<LabelerName>E.R. Squibb & Sons, L.L.C.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030624</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>REYATAZ® is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 REYATAZ is not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of REYATAZ with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].</IndicationAndUsage>
<Description>The active ingredient in REYATAZ capsules and oral powder is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4-5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. REYATAZ Capsules are available for oral administration in strengths of 200 mg or 300 mg of atazanavir, which are equivalent to 227.8 mg or 341.69 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue No. 2, titanium dioxide, black iron oxide, red iron oxide, and yellow iron oxide. The capsules are printed with ink containing shellac, titanium dioxide, FD&C Blue No. 2, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol, simethicone, and dehydrated alcohol. REYATAZ oral powder comes in a packet containing 50 mg of atazanavir equivalent to 56.9 mg of atazanavir sulfate in 1.5 g of powder. The powder is off-white to pale yellow and contains the following inactive ingredients: aspartame, sucrose, and orange-vanilla flavor.</Description>
</NDC>
<NDC>
<NDCCode>0003-3638-10</NDCCode>
<PackageDescription>30 PACKET in 1 CARTON (0003-3638-10) / 1 POWDER in 1 PACKET</PackageDescription>
<NDC11Code>00003-3638-10</NDC11Code>
<ProductNDC>0003-3638</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Reyataz</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141219</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA206352</ApplicationNumber>
<LabelerName>E.R. Squibb & Sons, L.L.C.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>REYATAZ® is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 REYATAZ is not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of REYATAZ with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].</IndicationAndUsage>
<Description>The active ingredient in REYATAZ capsules and oral powder is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is slightly soluble in water (4-5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3°C. REYATAZ Capsules are available for oral administration in strengths of 200 mg or 300 mg of atazanavir, which are equivalent to 227.8 mg or 341.69 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue No. 2, titanium dioxide, black iron oxide, red iron oxide, and yellow iron oxide. The capsules are printed with ink containing shellac, titanium dioxide, FD&C Blue No. 2, isopropyl alcohol, ammonium hydroxide, propylene glycol, n-butyl alcohol, simethicone, and dehydrated alcohol. REYATAZ oral powder comes in a packet containing 50 mg of atazanavir equivalent to 56.9 mg of atazanavir sulfate in 1.5 g of powder. The powder is off-white to pale yellow and contains the following inactive ingredients: aspartame, sucrose, and orange-vanilla flavor.</Description>
</NDC>
<NDC>
<NDCCode>0093-5526-06</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (0093-5526-06) </PackageDescription>
<NDC11Code>00093-5526-06</NDC11Code>
<ProductNDC>0093-5526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir Sulfate</ProprietaryName>
<NonProprietaryName>Atazanavir Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091673</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of atazanavir capsules with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, USP, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate, USP is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8 hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13 pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7●H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate, USP has the following structural formula. Atazanavir sulfate, USP is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3○C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.8 mg, 227.8 mg, or 341.69 mg of atazanavir sulfate, USP, respectively. The capsules contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C Blue No. 1, gelatin, and titanium dioxide. The 300 mg capsule shells also contain FD&C Red No. 40. The capsules are printed with black ink containing D&C Yellow No. 10 aluminum lake, FD&C Blue No. 1 aluminum lake, FD&C Blue No. 2 aluminum lake, FD&C Red No. 40 aluminum lake, iron oxide black, shellac, and may contain propylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>0093-5527-06</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (0093-5527-06) </PackageDescription>
<NDC11Code>00093-5527-06</NDC11Code>
<ProductNDC>0093-5527</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir Sulfate</ProprietaryName>
<NonProprietaryName>Atazanavir Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091673</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of atazanavir capsules with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, USP, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate, USP is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8 hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13 pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7●H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate, USP has the following structural formula. Atazanavir sulfate, USP is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3○C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.8 mg, 227.8 mg, or 341.69 mg of atazanavir sulfate, USP, respectively. The capsules contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C Blue No. 1, gelatin, and titanium dioxide. The 300 mg capsule shells also contain FD&C Red No. 40. The capsules are printed with black ink containing D&C Yellow No. 10 aluminum lake, FD&C Blue No. 1 aluminum lake, FD&C Blue No. 2 aluminum lake, FD&C Red No. 40 aluminum lake, iron oxide black, shellac, and may contain propylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>0093-5528-56</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (0093-5528-56) </PackageDescription>
<NDC11Code>00093-5528-56</NDC11Code>
<ProductNDC>0093-5528</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir Sulfate</ProprietaryName>
<NonProprietaryName>Atazanavir Sulfate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091673</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations (8.4)]., 2 Use of atazanavir capsules with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)].</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, USP, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate, USP is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8 hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13 pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7●H2SO4, which corresponds to a molecular weight of 802.9 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate, USP has the following structural formula. Atazanavir sulfate, USP is a white to pale-yellow crystalline powder. It is slightly soluble in water (4 to 5 mg/mL, free base equivalent) with the pH of a saturated solution in water being about 1.9 at 24 ± 3○C. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.8 mg, 227.8 mg, or 341.69 mg of atazanavir sulfate, USP, respectively. The capsules contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: FD&C Blue No. 1, gelatin, and titanium dioxide. The 300 mg capsule shells also contain FD&C Red No. 40. The capsules are printed with black ink containing D&C Yellow No. 10 aluminum lake, FD&C Blue No. 1 aluminum lake, FD&C Blue No. 2 aluminum lake, FD&C Red No. 40 aluminum lake, iron oxide black, shellac, and may contain propylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>0159-2400-24</NDCCode>
<PackageDescription>227 g in 1 BOTTLE (0159-2400-24)</PackageDescription>
<NDC11Code>00159-2400-24</NDC11Code>
<ProductNDC>0159-2400</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Selan Plus Zinc</ProprietaryName>
<NonProprietaryName>Selan Plus Zinc</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19970829</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Trividia Manufacturing Solutions, Inc</LabelerName>
<SubstanceName>DIMETHICONE; ZINC OXIDE</SubstanceName>
<StrengthNumber>2.3; 2</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-11-17</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0186-0370-20</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0186-0370-20) / 1 CANISTER in 1 POUCH / 120 AEROSOL in 1 CANISTER</PackageDescription>
<NDC11Code>00186-0370-20</NDC11Code>
<ProductNDC>0186-0370</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Symbicort</ProprietaryName>
<NonProprietaryName>Budesonide And Formoterol Fumarate Dihydrate</NonProprietaryName>
<DosageFormName>AEROSOL</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20070529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021929</ApplicationNumber>
<LabelerName>AstraZeneca Pharmaceuticals LP</LabelerName>
<SubstanceName>BUDESONIDE; FORMOTEROL FUMARATE</SubstanceName>
<StrengthNumber>160; 4.5</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SYMBICORT is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist indicated for: 1 Treatment of asthma in patients 6 years of age and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD) including chronic bronchitis and/or emphysema. (1.2).</IndicationAndUsage>
<Description>SYMBICORT 80/4.5 and SYMBICORT 160/4.5 each contain micronized budesonide and micronized formoterol fumarate dihydrate for oral inhalation only. Each SYMBICORT 80/4.5 and SYMBICORT 160/4.5 canister is formulated as a hydrofluoroalkane (HFA 227; 1,1,1,2,3,3,3-heptafluoropropane)-propelled pressurized metered dose inhaler containing either 60 or 120 actuations [see Dosage Forms and Strengths (3) and How Supplied/Storage and Handling (16)]. After priming, each actuation meters either 91/5.1 mcg or 181/5.1 mcg from the valve and delivers either 80/4.5 mcg, or 160/4.5 mcg (budesonide micronized/formoterol fumarate dihydrate micronized) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. SYMBICORT also contains povidone K25 USP as a suspending agent and polyethylene glycol 1000 NF as a lubricant. SYMBICORT should be primed before using for the first time by releasing two test sprays into the air away from the face, shaking well for 5 seconds before each spray. In cases where the inhaler has not been used for more than 7 days or when it has been dropped, prime the inhaler again by shaking well for 5 seconds before each spray and releasing two test sprays into the air away from the face. One active component of SYMBICORT is budesonide, a corticosteroid designated chemically as (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder which is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. The other active component of SYMBICORT is formoterol fumarate dihydrate, a selective beta2-agonist designated chemically as (R*,R*)-(±)-N-[2-hydroxy-5-[1-hydroxy-2-[[2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]formamide, (E)-2-butendioate(2:1), dihydrate. The empirical formula of formoterol is C42H56N4O14 and its molecular weight is 840.9. Its structural formula is. Formoterol fumarate dihydrate is a powder which is slightly soluble in water. Its octanol-water partition coefficient at pH 7.4 is 2.6. The pKa of formoterol fumarate dihydrate at 25°C is 7.9 for the phenolic group and 9.2 for the amino group.</Description>
</NDC>
<NDC>
<NDCCode>0186-0370-28</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0186-0370-28) / 1 CANISTER in 1 POUCH / 60 AEROSOL in 1 CANISTER</PackageDescription>
<NDC11Code>00186-0370-28</NDC11Code>
<ProductNDC>0186-0370</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Symbicort</ProprietaryName>
<NonProprietaryName>Budesonide And Formoterol Fumarate Dihydrate</NonProprietaryName>
<DosageFormName>AEROSOL</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20070529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021929</ApplicationNumber>
<LabelerName>AstraZeneca Pharmaceuticals LP</LabelerName>
<SubstanceName>BUDESONIDE; FORMOTEROL FUMARATE</SubstanceName>
<StrengthNumber>160; 4.5</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SYMBICORT is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist indicated for: 1 Treatment of asthma in patients 6 years of age and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD) including chronic bronchitis and/or emphysema. (1.2).</IndicationAndUsage>
<Description>SYMBICORT 80/4.5 and SYMBICORT 160/4.5 each contain micronized budesonide and micronized formoterol fumarate dihydrate for oral inhalation only. Each SYMBICORT 80/4.5 and SYMBICORT 160/4.5 canister is formulated as a hydrofluoroalkane (HFA 227; 1,1,1,2,3,3,3-heptafluoropropane)-propelled pressurized metered dose inhaler containing either 60 or 120 actuations [see Dosage Forms and Strengths (3) and How Supplied/Storage and Handling (16)]. After priming, each actuation meters either 91/5.1 mcg or 181/5.1 mcg from the valve and delivers either 80/4.5 mcg, or 160/4.5 mcg (budesonide micronized/formoterol fumarate dihydrate micronized) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. SYMBICORT also contains povidone K25 USP as a suspending agent and polyethylene glycol 1000 NF as a lubricant. SYMBICORT should be primed before using for the first time by releasing two test sprays into the air away from the face, shaking well for 5 seconds before each spray. In cases where the inhaler has not been used for more than 7 days or when it has been dropped, prime the inhaler again by shaking well for 5 seconds before each spray and releasing two test sprays into the air away from the face. One active component of SYMBICORT is budesonide, a corticosteroid designated chemically as (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder which is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. The other active component of SYMBICORT is formoterol fumarate dihydrate, a selective beta2-agonist designated chemically as (R*,R*)-(±)-N-[2-hydroxy-5-[1-hydroxy-2-[[2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]formamide, (E)-2-butendioate(2:1), dihydrate. The empirical formula of formoterol is C42H56N4O14 and its molecular weight is 840.9. Its structural formula is. Formoterol fumarate dihydrate is a powder which is slightly soluble in water. Its octanol-water partition coefficient at pH 7.4 is 2.6. The pKa of formoterol fumarate dihydrate at 25°C is 7.9 for the phenolic group and 9.2 for the amino group.</Description>
</NDC>
<NDC>
<NDCCode>0186-0372-20</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0186-0372-20) / 1 CANISTER in 1 POUCH / 120 AEROSOL in 1 CANISTER</PackageDescription>
<NDC11Code>00186-0372-20</NDC11Code>
<ProductNDC>0186-0372</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Symbicort</ProprietaryName>
<NonProprietaryName>Budesonide And Formoterol Fumarate Dihydrate</NonProprietaryName>
<DosageFormName>AEROSOL</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20070529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021929</ApplicationNumber>
<LabelerName>AstraZeneca Pharmaceuticals LP</LabelerName>
<SubstanceName>BUDESONIDE; FORMOTEROL FUMARATE</SubstanceName>
<StrengthNumber>80; 4.5</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SYMBICORT is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist indicated for: 1 Treatment of asthma in patients 6 years of age and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD) including chronic bronchitis and/or emphysema. (1.2).</IndicationAndUsage>
<Description>SYMBICORT 80/4.5 and SYMBICORT 160/4.5 each contain micronized budesonide and micronized formoterol fumarate dihydrate for oral inhalation only. Each SYMBICORT 80/4.5 and SYMBICORT 160/4.5 canister is formulated as a hydrofluoroalkane (HFA 227; 1,1,1,2,3,3,3-heptafluoropropane)-propelled pressurized metered dose inhaler containing either 60 or 120 actuations [see Dosage Forms and Strengths (3) and How Supplied/Storage and Handling (16)]. After priming, each actuation meters either 91/5.1 mcg or 181/5.1 mcg from the valve and delivers either 80/4.5 mcg, or 160/4.5 mcg (budesonide micronized/formoterol fumarate dihydrate micronized) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. SYMBICORT also contains povidone K25 USP as a suspending agent and polyethylene glycol 1000 NF as a lubricant. SYMBICORT should be primed before using for the first time by releasing two test sprays into the air away from the face, shaking well for 5 seconds before each spray. In cases where the inhaler has not been used for more than 7 days or when it has been dropped, prime the inhaler again by shaking well for 5 seconds before each spray and releasing two test sprays into the air away from the face. One active component of SYMBICORT is budesonide, a corticosteroid designated chemically as (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder which is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. The other active component of SYMBICORT is formoterol fumarate dihydrate, a selective beta2-agonist designated chemically as (R*,R*)-(±)-N-[2-hydroxy-5-[1-hydroxy-2-[[2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]formamide, (E)-2-butendioate(2:1), dihydrate. The empirical formula of formoterol is C42H56N4O14 and its molecular weight is 840.9. Its structural formula is. Formoterol fumarate dihydrate is a powder which is slightly soluble in water. Its octanol-water partition coefficient at pH 7.4 is 2.6. The pKa of formoterol fumarate dihydrate at 25°C is 7.9 for the phenolic group and 9.2 for the amino group.</Description>
</NDC>
<NDC>
<NDCCode>0186-0372-28</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0186-0372-28) / 1 CANISTER in 1 POUCH / 60 AEROSOL in 1 CANISTER</PackageDescription>
<NDC11Code>00186-0372-28</NDC11Code>
<ProductNDC>0186-0372</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Symbicort</ProprietaryName>
<NonProprietaryName>Budesonide And Formoterol Fumarate Dihydrate</NonProprietaryName>
<DosageFormName>AEROSOL</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20070529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021929</ApplicationNumber>
<LabelerName>AstraZeneca Pharmaceuticals LP</LabelerName>
<SubstanceName>BUDESONIDE; FORMOTEROL FUMARATE</SubstanceName>
<StrengthNumber>80; 4.5</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SYMBICORT is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist indicated for: 1 Treatment of asthma in patients 6 years of age and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD) including chronic bronchitis and/or emphysema. (1.2).</IndicationAndUsage>
<Description>SYMBICORT 80/4.5 and SYMBICORT 160/4.5 each contain micronized budesonide and micronized formoterol fumarate dihydrate for oral inhalation only. Each SYMBICORT 80/4.5 and SYMBICORT 160/4.5 canister is formulated as a hydrofluoroalkane (HFA 227; 1,1,1,2,3,3,3-heptafluoropropane)-propelled pressurized metered dose inhaler containing either 60 or 120 actuations [see Dosage Forms and Strengths (3) and How Supplied/Storage and Handling (16)]. After priming, each actuation meters either 91/5.1 mcg or 181/5.1 mcg from the valve and delivers either 80/4.5 mcg, or 160/4.5 mcg (budesonide micronized/formoterol fumarate dihydrate micronized) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. SYMBICORT also contains povidone K25 USP as a suspending agent and polyethylene glycol 1000 NF as a lubricant. SYMBICORT should be primed before using for the first time by releasing two test sprays into the air away from the face, shaking well for 5 seconds before each spray. In cases where the inhaler has not been used for more than 7 days or when it has been dropped, prime the inhaler again by shaking well for 5 seconds before each spray and releasing two test sprays into the air away from the face. One active component of SYMBICORT is budesonide, a corticosteroid designated chemically as (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder which is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. The other active component of SYMBICORT is formoterol fumarate dihydrate, a selective beta2-agonist designated chemically as (R*,R*)-(±)-N-[2-hydroxy-5-[1-hydroxy-2-[[2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]formamide, (E)-2-butendioate(2:1), dihydrate. The empirical formula of formoterol is C42H56N4O14 and its molecular weight is 840.9. Its structural formula is. Formoterol fumarate dihydrate is a powder which is slightly soluble in water. Its octanol-water partition coefficient at pH 7.4 is 2.6. The pKa of formoterol fumarate dihydrate at 25°C is 7.9 for the phenolic group and 9.2 for the amino group.</Description>
</NDC>
<NDC>
<NDCCode>0378-9102-93</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (0378-9102-93) > 1 PATCH in 1 POUCH (0378-9102-16) > 14 h in 1 PATCH</PackageDescription>
<NDC11Code>00378-9102-93</NDC11Code>
<ProductNDC>0378-9102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19980618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074559</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/h</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-11-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980618</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol, trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The nitroglycerin transdermal system is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately 0.026 mg of nitroglycerin per hour. Thus, the 4 cm2, 8 cm2, 16 cm2 and 24 cm2 systems deliver approximately 0.1 mg, 0.2 mg, 0.4 mg and 0.6 mg of nitroglycerin per hour, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 11% of its original content of nitroglycerin. The nitroglycerin transdermal system comprises two layers as shown below. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1) a polyolefin film backing layer that is impermeable to nitroglycerin and is printed with the name of the drug and strength; 2) nitroglycerin in an acrylic pressure sensitive adhesive. Prior to use, a peelable polyester release liner, which is coated on one side with silicone, is removed from the adhesive surface. Each unit is sealed in a foil-lined pouch. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>0378-9104-93</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (0378-9104-93) > 1 PATCH in 1 POUCH (0378-9104-16) > 14 h in 1 PATCH</PackageDescription>
<NDC11Code>00378-9104-93</NDC11Code>
<ProductNDC>0378-9104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19960830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074559</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/h</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-11-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol, trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The nitroglycerin transdermal system is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately 0.026 mg of nitroglycerin per hour. Thus, the 4 cm2, 8 cm2, 16 cm2 and 24 cm2 systems deliver approximately 0.1 mg, 0.2 mg, 0.4 mg and 0.6 mg of nitroglycerin per hour, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 11% of its original content of nitroglycerin. The nitroglycerin transdermal system comprises two layers as shown below. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1) a polyolefin film backing layer that is impermeable to nitroglycerin and is printed with the name of the drug and strength; 2) nitroglycerin in an acrylic pressure sensitive adhesive. Prior to use, a peelable polyester release liner, which is coated on one side with silicone, is removed from the adhesive surface. Each unit is sealed in a foil-lined pouch. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>0378-9112-93</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (0378-9112-93) > 1 PATCH in 1 POUCH (0378-9112-16) > 14 h in 1 PATCH</PackageDescription>
<NDC11Code>00378-9112-93</NDC11Code>
<ProductNDC>0378-9112</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19960830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074559</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/h</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-11-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol, trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The nitroglycerin transdermal system is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately 0.026 mg of nitroglycerin per hour. Thus, the 4 cm2, 8 cm2, 16 cm2 and 24 cm2 systems deliver approximately 0.1 mg, 0.2 mg, 0.4 mg and 0.6 mg of nitroglycerin per hour, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 11% of its original content of nitroglycerin. The nitroglycerin transdermal system comprises two layers as shown below. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1) a polyolefin film backing layer that is impermeable to nitroglycerin and is printed with the name of the drug and strength; 2) nitroglycerin in an acrylic pressure sensitive adhesive. Prior to use, a peelable polyester release liner, which is coated on one side with silicone, is removed from the adhesive surface. Each unit is sealed in a foil-lined pouch. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>0378-9116-93</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (0378-9116-93) > 1 PATCH in 1 POUCH (0378-9116-16) > 14 h in 1 PATCH</PackageDescription>
<NDC11Code>00378-9116-93</NDC11Code>
<ProductNDC>0378-9116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19960830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074559</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>.6</StrengthNumber>
<StrengthUnit>mg/h</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-11-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol, trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The nitroglycerin transdermal system is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately 0.026 mg of nitroglycerin per hour. Thus, the 4 cm2, 8 cm2, 16 cm2 and 24 cm2 systems deliver approximately 0.1 mg, 0.2 mg, 0.4 mg and 0.6 mg of nitroglycerin per hour, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 11% of its original content of nitroglycerin. The nitroglycerin transdermal system comprises two layers as shown below. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1) a polyolefin film backing layer that is impermeable to nitroglycerin and is printed with the name of the drug and strength; 2) nitroglycerin in an acrylic pressure sensitive adhesive. Prior to use, a peelable polyester release liner, which is coated on one side with silicone, is removed from the adhesive surface. Each unit is sealed in a foil-lined pouch. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>0404-9928-10</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (0404-9928-10) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00404-9928-10</NDC11Code>
<ProductNDC>0404-9928</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072034</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitroglycerin Injection is indicated for treatment of peri-operative hypertension; for control of congestive heart failure in the setting of acute myocardial infarction;for treatment of angina pectoris in patients who have not responded to sublingual nitroglycerin and b-blockers; and for induction of intraoperative hypotension.</IndicationAndUsage>
<Description>Rx Only. FOR INTRAVENOUS USE ONLY. NOT FOR DIRECT INTRAVENOUS INJECTION. NITROGLYCERIN INJECTION MUST BE DILUTED IN DEXTROSE (5%) INJECTION OR SODIUM CHLORIDE (0.9%) INJECTION PRIOR TO ITS INFUSION (SEE DOSAGE AND ADMINISTRATION SECTION). THE ADMINISTRATION SET USED FOR INFUSION WILL AFFECT THE AMOUNT OF NITROGLYCERIN INJECTION DELIVERED TO THE PATIENT. (SEE WARNINGS, AND DOSAGE AND ADMINISTRATION SECTIONS). CAUTIONSEVERAL PREPARATIONS OF NITROGLYCERIN FOR INJECTION ARE AVAILABLE. THEY DIFFER IN CONCENTRATION AND/OR VOLUME PER VIAL. WHEN SWITCHING FROM ONE PRODUCT TO ANOTHER, ATTENTION MUST BE PAID TO THE DILUTION AND DOSAGE AND ADMINISTRATION INSTRUCTIONS. DESCRIPTION:Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. whose empiric formula is C3H5N3O9, and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins.Nitroglycerin Injection, USP is a clear, practically colorless additive solution for intravenous infusion after dilution. Each mL contains: Nitroglycerin 5 mg, Alcohol 30% (v/v), Propylene Glycol 30%, and Water for Injection q.s. pH (range 3.0 to 6.5) may have been adjusted with Sodium Hydroxide and/or Hydrochloric Acid.The solution is sterile, non-pyrogenic, and nonexplosive.</Description>
</NDC>
<NDC>
<NDCCode>11084-909-17</NDCCode>
<PackageDescription>1 CAN in 1 KIT (11084-909-17) / 227 g in 1 CAN</PackageDescription>
<NDC11Code>11084-0909-17</NDC11Code>
<ProductNDC>11084-909</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Alcare Plus Foaming Antiseptic Handrub</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>AEROSOL, FOAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>SC Johnson Professional USA Inc</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>59.7</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Surgical Scrub significantly reduces the number of micro-organisms on the hands and forearms prior to surgery or patient care. Healthcare Personnel Handwash to decrease transient bacteria on the skin before contact with patients under medical care or treatment.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11084-909-18</NDCCode>
<PackageDescription>2 CAN in 1 BOX (11084-909-18) / 227 g in 1 CAN</PackageDescription>
<NDC11Code>11084-0909-18</NDC11Code>
<ProductNDC>11084-909</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Alcare Plus Foaming Antiseptic Handrub</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>AEROSOL, FOAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>SC Johnson Professional USA Inc</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>59.7</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Surgical Scrub significantly reduces the number of micro-organisms on the hands and forearms prior to surgery or patient care. Healthcare Personnel Handwash to decrease transient bacteria on the skin before contact with patients under medical care or treatment.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>12090-0016-3</NDCCode>
<PackageDescription>227 g in 1 JAR (12090-0016-3)</PackageDescription>
<NDC11Code>12090-0016-03</NDC11Code>
<ProductNDC>12090-0016</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lantiseptic</ProprietaryName>
<ProprietaryNameSuffix>Dry Skin Therapy</ProprietaryNameSuffix>
<NonProprietaryName>Lanolin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Summit Industries, Inc.</LabelerName>
<SubstanceName>LANOLIN</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-03-11</LastUpdate>
</NDC>
<NDC>
<NDCCode>12090-0040-6</NDCCode>
<PackageDescription>227 g in 1 JAR (12090-0040-6)</PackageDescription>
<NDC11Code>12090-0040-06</NDC11Code>
<ProductNDC>12090-0040</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lantiseptic</ProprietaryName>
<ProprietaryNameSuffix>Daily Care Skin Protectant</ProprietaryNameSuffix>
<NonProprietaryName>Lanolin</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Summit Industries, Inc.</LabelerName>
<SubstanceName>LANOLIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-03-11</LastUpdate>
</NDC>
<NDC>
<NDCCode>13709-357-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (13709-357-01) / 227 g in 1 TUBE</PackageDescription>
<NDC11Code>13709-0357-01</NDC11Code>
<ProductNDC>13709-357</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Menthol Pain Relieving Gel</ProprietaryName>
<NonProprietaryName>Pain Relieving Gel</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260507</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M014</ApplicationNumber>
<LabelerName>NeilMed Pharmaceuticals Inc</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>4.54</StrengthNumber>
<StrengthUnit>g/227g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cooling, Pain relieving gel for muscle aches. arthiritis pain. simple backache.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>14448-316-00</NDCCode>
<PackageDescription>227 g in 1 JAR (14448-316-00) </PackageDescription>
<NDC11Code>14448-0316-00</NDC11Code>
<ProductNDC>14448-316</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Blue Spring Foot And Leg Comfort Cream With Pain Relief</ProprietaryName>
<NonProprietaryName>Menthol, Capsaicin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20211025</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>BLUE SPRING WELLNESS, L.L.C.</LabelerName>
<SubstanceName>MENTHOL; CAPSAICIN</SubstanceName>
<StrengthNumber>15; .25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporary relief of minor aches and pains of muscles and joints.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16477-341-08</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (16477-341-08) / 227 g in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>16477-0341-08</NDC11Code>
<ProductNDC>16477-341</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Urea Cream 41%</ProprietaryName>
<NonProprietaryName>Urea</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180504</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Laser Pharmaceuticals, LLC</LabelerName>
<SubstanceName>UREA</SubstanceName>
<StrengthNumber>410</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indications and Usage. For debridement and promotion of normal healing of hyperkeratotic surface lesions, particularly where healing is retarded by local infection, necrotic tissue, fibrinous or purulent debris or eshar. Urea is useful for the treatment of hyperkeratotic conditions such as dry, rough skin, dermatitis, psoriasis, xerosis, ichthyosis, eczema, keratosis pilaris, keratosis palmaris, keratoderma, corns and calluses, as well as damaged, ingrown and devitalized nails.</IndicationAndUsage>
<Description>Description. Urea 41% is a keratolytic emollient which is a gentle, yet potent, tissue softener for nails and/or skin. Each gram of Urea 41% contains 41% urea as an active ingredient, and the following inactive ingredients: Ceteareth-6, Ceteareth-25, Cetyl Alcohol, Mineral Oil, Propylene Glycol, Purified Water, Sodium Hydroxide, Stearyl Alcohol, Xanthan Gum. Urea is a diamide of carbonic acid with the following chemical structure.</Description>
</NDC>
</NDCList>