{
"NDC": [
{
"NDCCode": "68968-6625-8",
"PackageDescription": "8 POUCH in 1 PACKET (68968-6625-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-6625-08",
"ProductNDC": "68968-6625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minivelle",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20121220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121220",
"SamplePackage": "N",
"Description": "MINIVELLE (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of MINIVELLE are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. MINIVELLE is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-0514-8",
"PackageDescription": "8 POUCH in 1 CARTON (68968-0514-8) / 1 PATCH in 1 POUCH / 3.5 d in 1 PATCH",
"NDC11Code": "68968-0514-08",
"ProductNDC": "68968-0514",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Combipatch (estradiol/norethindrone Acetate Transdermal System)",
"NonProprietaryName": "Estradiol/norethindrone Acetate Transdermal System",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19980807",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020870",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL; NORETHINDRONE ACETATE",
"StrengthNumber": ".05; .14",
"StrengthUnit": "mg/d; mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980807",
"SamplePackage": "N",
"IndicationAndUsage": "CombiPatch is indicated in a woman with a uterus for: 1 Treatment of moderate to severe vasomotor symptoms due to menopause., 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy due to menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration, or primary ovarian failure.",
"Description": "CombiPatch® (estradiol/norethindrone acetate transdermal system) is an adhesive-based matrix transdermal patch designed to release both estradiol, an estrogen, and norethindrone acetate (NETA), a progestational agent, continuously upon application to intact skin. Two systems are available, providing the following in vivo delivery rates of estradiol and NETA. Estradiol USP (estradiol) is a white to creamy white, odorless, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17 β-diol. The molecular weight of estradiol is 272.39 and the molecular formula is C18H24O2. NETA USP is a white to creamy white, odorless, crystalline powder, chemically described as 17-hydroxy-19-nor-17α-pregn-4-en-20-yn-3-one acetate. The molecular weight of NETA is 340.47 and the molecular formula is C22H28O3. The structural formulas for estradiol and NETA are. CombiPatch is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film backing, (2) an adhesive layer containing estradiol, NETA, acrylic adhesive, silicone adhesive, oleic acid NF, povidone USP and dipropylene glycol, and (3) a polyester release protective liner, which is attached to the adhesive surface and must be removed before the system can be used. The active components of the system are estradiol USP and NETA USP. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-0525-8",
"PackageDescription": "8 POUCH in 1 CARTON (68968-0525-8) / 1 PATCH in 1 POUCH / 3.5 d in 1 PATCH",
"NDC11Code": "68968-0525-08",
"ProductNDC": "68968-0525",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Combipatch (estradiol/norethindrone Acetate Transdermal System)",
"NonProprietaryName": "Estradiol/norethindrone Acetate Transdermal System",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19980807",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020870",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL; NORETHINDRONE ACETATE",
"StrengthNumber": ".05; .25",
"StrengthUnit": "mg/d; mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980807",
"SamplePackage": "N",
"IndicationAndUsage": "CombiPatch is indicated in a woman with a uterus for: 1 Treatment of moderate to severe vasomotor symptoms due to menopause., 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy due to menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration, or primary ovarian failure.",
"Description": "CombiPatch® (estradiol/norethindrone acetate transdermal system) is an adhesive-based matrix transdermal patch designed to release both estradiol, an estrogen, and norethindrone acetate (NETA), a progestational agent, continuously upon application to intact skin. Two systems are available, providing the following in vivo delivery rates of estradiol and NETA. Estradiol USP (estradiol) is a white to creamy white, odorless, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17 β-diol. The molecular weight of estradiol is 272.39 and the molecular formula is C18H24O2. NETA USP is a white to creamy white, odorless, crystalline powder, chemically described as 17-hydroxy-19-nor-17α-pregn-4-en-20-yn-3-one acetate. The molecular weight of NETA is 340.47 and the molecular formula is C22H28O3. The structural formulas for estradiol and NETA are. CombiPatch is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film backing, (2) an adhesive layer containing estradiol, NETA, acrylic adhesive, silicone adhesive, oleic acid NF, povidone USP and dipropylene glycol, and (3) a polyester release protective liner, which is attached to the adhesive surface and must be removed before the system can be used. The active components of the system are estradiol USP and NETA USP. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-3410-8",
"PackageDescription": "8 POUCH in 1 CARTON (68968-3410-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-3410-08",
"ProductNDC": "68968-3410",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "ESTRADIOL TRANSDERMAL SYSTEM is indicated for.",
"Description": "ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-3425-8",
"PackageDescription": "8 POUCH in 1 CARTON (68968-3425-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-3425-08",
"ProductNDC": "68968-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "ESTRADIOL TRANSDERMAL SYSTEM is indicated for.",
"Description": "ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-3437-8",
"PackageDescription": "8 POUCH in 1 CARTON (68968-3437-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-3437-08",
"ProductNDC": "68968-3437",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "ESTRADIOL TRANSDERMAL SYSTEM is indicated for.",
"Description": "ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-3450-8",
"PackageDescription": "8 POUCH in 1 CARTON (68968-3450-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-3450-08",
"ProductNDC": "68968-3450",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "ESTRADIOL TRANSDERMAL SYSTEM is indicated for.",
"Description": "ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-3475-8",
"PackageDescription": "8 POUCH in 1 CARTON (68968-3475-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-3475-08",
"ProductNDC": "68968-3475",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "ESTRADIOL TRANSDERMAL SYSTEM is indicated for.",
"Description": "ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-6610-3",
"PackageDescription": "3 PACKET in 1 CARTON (68968-6610-3) > 8 POUCH in 1 PACKET > 1 FILM, EXTENDED RELEASE in 1 POUCH (68968-6610-1)",
"NDC11Code": "68968-6610-03",
"ProductNDC": "68968-6610",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minivelle",
"NonProprietaryName": "(estradiol Transdermal System)",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20121220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2014-10-10"
},
{
"NDCCode": "68968-6610-8",
"PackageDescription": "8 POUCH in 1 PACKET (68968-6610-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-6610-08",
"ProductNDC": "68968-6610",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minivelle",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20121220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121220",
"SamplePackage": "N",
"Description": "MINIVELLE (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of MINIVELLE are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. MINIVELLE is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-6637-3",
"PackageDescription": "3 PACKET in 1 CARTON (68968-6637-3) > 8 POUCH in 1 PACKET > 1 FILM, EXTENDED RELEASE in 1 POUCH (68968-6637-1)",
"NDC11Code": "68968-6637-03",
"ProductNDC": "68968-6637",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minivelle",
"NonProprietaryName": "(estradiol Transdermal System)",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20121220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2014-10-10"
},
{
"NDCCode": "68968-6637-8",
"PackageDescription": "8 POUCH in 1 PACKET (68968-6637-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-6637-08",
"ProductNDC": "68968-6637",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minivelle",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20121220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121220",
"SamplePackage": "N",
"Description": "MINIVELLE (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of MINIVELLE are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. MINIVELLE is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-6650-3",
"PackageDescription": "3 PACKET in 1 CARTON (68968-6650-3) > 8 POUCH in 1 PACKET > 1 FILM, EXTENDED RELEASE in 1 POUCH (68968-6650-1)",
"NDC11Code": "68968-6650-03",
"ProductNDC": "68968-6650",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minivelle",
"NonProprietaryName": "(estradiol Transdermal System)",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20121220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2014-10-10"
},
{
"NDCCode": "68968-6650-8",
"PackageDescription": "8 POUCH in 1 PACKET (68968-6650-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-6650-08",
"ProductNDC": "68968-6650",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minivelle",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20121220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121220",
"SamplePackage": "N",
"Description": "MINIVELLE (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of MINIVELLE are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. MINIVELLE is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "68968-6675-3",
"PackageDescription": "3 PACKET in 1 CARTON (68968-6675-3) > 8 POUCH in 1 PACKET > 1 FILM, EXTENDED RELEASE in 1 POUCH (68968-6675-1)",
"NDC11Code": "68968-6675-03",
"ProductNDC": "68968-6675",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minivelle",
"NonProprietaryName": "(estradiol Transdermal System)",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20121220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2014-10-10"
},
{
"NDCCode": "68968-6675-8",
"PackageDescription": "8 POUCH in 1 PACKET (68968-6675-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-6675-08",
"ProductNDC": "68968-6675",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minivelle",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20121220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121220",
"SamplePackage": "N",
"Description": "MINIVELLE (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of MINIVELLE are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. MINIVELLE is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0404-6625-05",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (0404-6625-05) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "00404-6625-05",
"ProductNDC": "0404-6625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Articaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Articaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20140128",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020971",
"LabelerName": "Henry Schein",
"SubstanceName": "ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "40; .005",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140128",
"SamplePackage": "N",
"IndicationAndUsage": "Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.",
"Description": "Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide."
},
{
"NDCCode": "0409-6625-14",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-6625-14) / 50 mL in 1 VIAL, SINGLE-DOSE (0409-6625-22) ",
"NDC11Code": "00409-6625-14",
"ProductNDC": "0409-6625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Bicarbonate",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202432",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "84",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210301",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Bicarbonate Injection is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis – e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial – e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.",
"Description": "Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 7.0 to 8.5. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3¯. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O."
},
{
"NDCCode": "0409-6625-35",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-6625-35) / 50 mL in 1 VIAL, SINGLE-DOSE (0409-6625-30) ",
"NDC11Code": "00409-6625-35",
"ProductNDC": "0409-6625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Bicarbonate",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202432",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "84",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201015",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Bicarbonate Injection is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis – e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial – e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.",
"Description": "Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 7.0 to 8.5. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3–. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O."
},
{
"NDCCode": "51004-6625-5",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-6625-5) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-6625-05",
"ProductNDC": "51004-6625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Articaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Articaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20140128",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020971",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "40; .005",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140128",
"SamplePackage": "N",
"IndicationAndUsage": "Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.",
"Description": "Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide."
},
{
"NDCCode": "61699-6625-2",
"PackageDescription": "1 VIAL in 1 BAG (61699-6625-2) > 50 mL in 1 VIAL",
"NDC11Code": "61699-6625-02",
"ProductNDC": "61699-6625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Bicarbonate",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20140703",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "US MedSource, LLC",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "84",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Sodium Bicarbonate Injection, USP is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of blood pigments. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis ― e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial ― e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.",
"Description": "Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2%, 5.0%, 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. Solution in LVP container has 0.9 mg/mL of edetate disodium, anhydrous added as a stabilizer. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3¯. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O."
},
{
"NDCCode": "68968-0172-3",
"PackageDescription": "30 POUCH in 1 CARTON (68968-0172-3) / 1 d in 1 POUCH",
"NDC11Code": "68968-0172-03",
"ProductNDC": "68968-0172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Secuado",
"NonProprietaryName": "Asenapine",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212268",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ASENAPINE",
"StrengthNumber": "3.8",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].",
"Description": "SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer."
},
{
"NDCCode": "68968-0172-7",
"PackageDescription": "7 POUCH in 1 CARTON (68968-0172-7) / 1 d in 1 POUCH",
"NDC11Code": "68968-0172-07",
"ProductNDC": "68968-0172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Secuado",
"NonProprietaryName": "Asenapine",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212268",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ASENAPINE",
"StrengthNumber": "3.8",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "Y",
"IndicationAndUsage": "SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].",
"Description": "SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer."
},
{
"NDCCode": "68968-0173-3",
"PackageDescription": "30 POUCH in 1 CARTON (68968-0173-3) / 1 d in 1 POUCH",
"NDC11Code": "68968-0173-03",
"ProductNDC": "68968-0173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Secuado",
"NonProprietaryName": "Asenapine",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212268",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ASENAPINE",
"StrengthNumber": "5.7",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].",
"Description": "SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer."
},
{
"NDCCode": "68968-0173-7",
"PackageDescription": "7 POUCH in 1 CARTON (68968-0173-7) / 1 d in 1 POUCH",
"NDC11Code": "68968-0173-07",
"ProductNDC": "68968-0173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Secuado",
"NonProprietaryName": "Asenapine",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212268",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ASENAPINE",
"StrengthNumber": "5.7",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].",
"Description": "SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer."
},
{
"NDCCode": "68968-0174-3",
"PackageDescription": "30 POUCH in 1 CARTON (68968-0174-3) / 1 d in 1 POUCH",
"NDC11Code": "68968-0174-03",
"ProductNDC": "68968-0174",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Secuado",
"NonProprietaryName": "Asenapine",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212268",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ASENAPINE",
"StrengthNumber": "7.6",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].",
"Description": "SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer."
},
{
"NDCCode": "68968-0174-7",
"PackageDescription": "7 POUCH in 1 CARTON (68968-0174-7) / 1 d in 1 POUCH",
"NDC11Code": "68968-0174-07",
"ProductNDC": "68968-0174",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Secuado",
"NonProprietaryName": "Asenapine",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212268",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ASENAPINE",
"StrengthNumber": "7.6",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].",
"Description": "SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer."
},
{
"NDCCode": "68968-0205-3",
"PackageDescription": "30 POUCH in 1 CARTON (68968-0205-3) / 1 PATCH, EXTENDED RELEASE in 1 POUCH (68968-0205-1) ",
"NDC11Code": "68968-0205-03",
"ProductNDC": "68968-0205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xelstrym",
"NonProprietaryName": "Dextroamphetamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20230515",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215401",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "DEXTROAMPHETAMINE",
"StrengthNumber": "4.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230515",
"SamplePackage": "N",
"IndicationAndUsage": "XELSTRYM® is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see CLINICAL STUDIES (14)]. Limitations of Use. The use of XELSTRYM is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)].",
"Description": "XELSTRYM (dextroamphetamine) transdermal system, contains dextroamphetamine, a CNS stimulant. Dextroamphetamine is the dextro isomer of the compound d,l-amphetamine. The chemical name for dextroamphetamine is (2S)-1-phenylpropan-2-amine. It is a clear to slightly amber colored liquid. Molecular weight of dextroamphetamine is 135.21 g/mol and the molecular formula is C9H13N. The chemical structure is. XELSTRYM is provided in four strengths: 4.5 mg/9 hours, 9 mg/9 hours, 13.5 mg/9 hours, and 18 mg/9 hours. The composition per unit area of all dosage strengths is identical. Inactive ingredients include: acrylic adhesives, green ink, polyester/polyurethane backing, and polyester release liner. Table 4: XELSTRYM (dextroamphetamine) transdermal system. Transdermal System Components. XELSTRYM consists of three layers (Figure 1). The layers are (1) oversized protective silicone-coated polyester release liner that is removed and discarded prior to application (2) acrylic adhesive matrix containing dextroamphetamine, and (3) polyester and polyurethane laminate film (backing). Figure 1: XELSTRYM Transdermal System (Exploded View)."
},
{
"NDCCode": "68968-0210-3",
"PackageDescription": "30 POUCH in 1 CARTON (68968-0210-3) / 1 PATCH, EXTENDED RELEASE in 1 POUCH (68968-0210-1) ",
"NDC11Code": "68968-0210-03",
"ProductNDC": "68968-0210",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xelstrym",
"NonProprietaryName": "Dextroamphetamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20230515",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215401",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "DEXTROAMPHETAMINE",
"StrengthNumber": "9",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230515",
"SamplePackage": "N",
"IndicationAndUsage": "XELSTRYM® is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see CLINICAL STUDIES (14)]. Limitations of Use. The use of XELSTRYM is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)].",
"Description": "XELSTRYM (dextroamphetamine) transdermal system, contains dextroamphetamine, a CNS stimulant. Dextroamphetamine is the dextro isomer of the compound d,l-amphetamine. The chemical name for dextroamphetamine is (2S)-1-phenylpropan-2-amine. It is a clear to slightly amber colored liquid. Molecular weight of dextroamphetamine is 135.21 g/mol and the molecular formula is C9H13N. The chemical structure is. XELSTRYM is provided in four strengths: 4.5 mg/9 hours, 9 mg/9 hours, 13.5 mg/9 hours, and 18 mg/9 hours. The composition per unit area of all dosage strengths is identical. Inactive ingredients include: acrylic adhesives, green ink, polyester/polyurethane backing, and polyester release liner. Table 4: XELSTRYM (dextroamphetamine) transdermal system. Transdermal System Components. XELSTRYM consists of three layers (Figure 1). The layers are (1) oversized protective silicone-coated polyester release liner that is removed and discarded prior to application (2) acrylic adhesive matrix containing dextroamphetamine, and (3) polyester and polyurethane laminate film (backing). Figure 1: XELSTRYM Transdermal System (Exploded View)."
},
{
"NDCCode": "68968-0215-3",
"PackageDescription": "30 POUCH in 1 CARTON (68968-0215-3) / 1 PATCH, EXTENDED RELEASE in 1 POUCH (68968-0215-1) ",
"NDC11Code": "68968-0215-03",
"ProductNDC": "68968-0215",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xelstrym",
"NonProprietaryName": "Dextroamphetamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20230515",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215401",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "DEXTROAMPHETAMINE",
"StrengthNumber": "13.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230515",
"SamplePackage": "N",
"IndicationAndUsage": "XELSTRYM® is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see CLINICAL STUDIES (14)]. Limitations of Use. The use of XELSTRYM is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)].",
"Description": "XELSTRYM (dextroamphetamine) transdermal system, contains dextroamphetamine, a CNS stimulant. Dextroamphetamine is the dextro isomer of the compound d,l-amphetamine. The chemical name for dextroamphetamine is (2S)-1-phenylpropan-2-amine. It is a clear to slightly amber colored liquid. Molecular weight of dextroamphetamine is 135.21 g/mol and the molecular formula is C9H13N. The chemical structure is. XELSTRYM is provided in four strengths: 4.5 mg/9 hours, 9 mg/9 hours, 13.5 mg/9 hours, and 18 mg/9 hours. The composition per unit area of all dosage strengths is identical. Inactive ingredients include: acrylic adhesives, green ink, polyester/polyurethane backing, and polyester release liner. Table 4: XELSTRYM (dextroamphetamine) transdermal system. Transdermal System Components. XELSTRYM consists of three layers (Figure 1). The layers are (1) oversized protective silicone-coated polyester release liner that is removed and discarded prior to application (2) acrylic adhesive matrix containing dextroamphetamine, and (3) polyester and polyurethane laminate film (backing). Figure 1: XELSTRYM Transdermal System (Exploded View)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68968-6625-8</NDCCode>
<PackageDescription>8 POUCH in 1 PACKET (68968-6625-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-6625-08</NDC11Code>
<ProductNDC>68968-6625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minivelle</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20121220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>MINIVELLE (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of MINIVELLE are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. MINIVELLE is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-0514-8</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (68968-0514-8) / 1 PATCH in 1 POUCH / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>68968-0514-08</NDC11Code>
<ProductNDC>68968-0514</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Combipatch (estradiol/norethindrone Acetate Transdermal System)</ProprietaryName>
<NonProprietaryName>Estradiol/norethindrone Acetate Transdermal System</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19980807</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020870</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL; NORETHINDRONE ACETATE</SubstanceName>
<StrengthNumber>.05; .14</StrengthNumber>
<StrengthUnit>mg/d; mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CombiPatch is indicated in a woman with a uterus for: 1 Treatment of moderate to severe vasomotor symptoms due to menopause., 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy due to menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration, or primary ovarian failure.</IndicationAndUsage>
<Description>CombiPatch® (estradiol/norethindrone acetate transdermal system) is an adhesive-based matrix transdermal patch designed to release both estradiol, an estrogen, and norethindrone acetate (NETA), a progestational agent, continuously upon application to intact skin. Two systems are available, providing the following in vivo delivery rates of estradiol and NETA. Estradiol USP (estradiol) is a white to creamy white, odorless, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17 β-diol. The molecular weight of estradiol is 272.39 and the molecular formula is C18H24O2. NETA USP is a white to creamy white, odorless, crystalline powder, chemically described as 17-hydroxy-19-nor-17α-pregn-4-en-20-yn-3-one acetate. The molecular weight of NETA is 340.47 and the molecular formula is C22H28O3. The structural formulas for estradiol and NETA are. CombiPatch is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film backing, (2) an adhesive layer containing estradiol, NETA, acrylic adhesive, silicone adhesive, oleic acid NF, povidone USP and dipropylene glycol, and (3) a polyester release protective liner, which is attached to the adhesive surface and must be removed before the system can be used. The active components of the system are estradiol USP and NETA USP. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-0525-8</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (68968-0525-8) / 1 PATCH in 1 POUCH / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>68968-0525-08</NDC11Code>
<ProductNDC>68968-0525</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Combipatch (estradiol/norethindrone Acetate Transdermal System)</ProprietaryName>
<NonProprietaryName>Estradiol/norethindrone Acetate Transdermal System</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19980807</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020870</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL; NORETHINDRONE ACETATE</SubstanceName>
<StrengthNumber>.05; .25</StrengthNumber>
<StrengthUnit>mg/d; mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CombiPatch is indicated in a woman with a uterus for: 1 Treatment of moderate to severe vasomotor symptoms due to menopause., 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy due to menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration, or primary ovarian failure.</IndicationAndUsage>
<Description>CombiPatch® (estradiol/norethindrone acetate transdermal system) is an adhesive-based matrix transdermal patch designed to release both estradiol, an estrogen, and norethindrone acetate (NETA), a progestational agent, continuously upon application to intact skin. Two systems are available, providing the following in vivo delivery rates of estradiol and NETA. Estradiol USP (estradiol) is a white to creamy white, odorless, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17 β-diol. The molecular weight of estradiol is 272.39 and the molecular formula is C18H24O2. NETA USP is a white to creamy white, odorless, crystalline powder, chemically described as 17-hydroxy-19-nor-17α-pregn-4-en-20-yn-3-one acetate. The molecular weight of NETA is 340.47 and the molecular formula is C22H28O3. The structural formulas for estradiol and NETA are. CombiPatch is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film backing, (2) an adhesive layer containing estradiol, NETA, acrylic adhesive, silicone adhesive, oleic acid NF, povidone USP and dipropylene glycol, and (3) a polyester release protective liner, which is attached to the adhesive surface and must be removed before the system can be used. The active components of the system are estradiol USP and NETA USP. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-3410-8</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (68968-3410-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-3410-08</NDC11Code>
<ProductNDC>68968-3410</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ESTRADIOL TRANSDERMAL SYSTEM is indicated for.</IndicationAndUsage>
<Description>ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-3425-8</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (68968-3425-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-3425-08</NDC11Code>
<ProductNDC>68968-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ESTRADIOL TRANSDERMAL SYSTEM is indicated for.</IndicationAndUsage>
<Description>ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-3437-8</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (68968-3437-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-3437-08</NDC11Code>
<ProductNDC>68968-3437</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ESTRADIOL TRANSDERMAL SYSTEM is indicated for.</IndicationAndUsage>
<Description>ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-3450-8</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (68968-3450-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-3450-08</NDC11Code>
<ProductNDC>68968-3450</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ESTRADIOL TRANSDERMAL SYSTEM is indicated for.</IndicationAndUsage>
<Description>ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-3475-8</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (68968-3475-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-3475-08</NDC11Code>
<ProductNDC>68968-3475</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ESTRADIOL TRANSDERMAL SYSTEM is indicated for.</IndicationAndUsage>
<Description>ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-6610-3</NDCCode>
<PackageDescription>3 PACKET in 1 CARTON (68968-6610-3) > 8 POUCH in 1 PACKET > 1 FILM, EXTENDED RELEASE in 1 POUCH (68968-6610-1)</PackageDescription>
<NDC11Code>68968-6610-03</NDC11Code>
<ProductNDC>68968-6610</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minivelle</ProprietaryName>
<NonProprietaryName>(estradiol Transdermal System)</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20121220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-10-10</LastUpdate>
</NDC>
<NDC>
<NDCCode>68968-6610-8</NDCCode>
<PackageDescription>8 POUCH in 1 PACKET (68968-6610-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-6610-08</NDC11Code>
<ProductNDC>68968-6610</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minivelle</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20121220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>MINIVELLE (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of MINIVELLE are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. MINIVELLE is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-6637-3</NDCCode>
<PackageDescription>3 PACKET in 1 CARTON (68968-6637-3) > 8 POUCH in 1 PACKET > 1 FILM, EXTENDED RELEASE in 1 POUCH (68968-6637-1)</PackageDescription>
<NDC11Code>68968-6637-03</NDC11Code>
<ProductNDC>68968-6637</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minivelle</ProprietaryName>
<NonProprietaryName>(estradiol Transdermal System)</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20121220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-10-10</LastUpdate>
</NDC>
<NDC>
<NDCCode>68968-6637-8</NDCCode>
<PackageDescription>8 POUCH in 1 PACKET (68968-6637-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-6637-08</NDC11Code>
<ProductNDC>68968-6637</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minivelle</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20121220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>MINIVELLE (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of MINIVELLE are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. MINIVELLE is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-6650-3</NDCCode>
<PackageDescription>3 PACKET in 1 CARTON (68968-6650-3) > 8 POUCH in 1 PACKET > 1 FILM, EXTENDED RELEASE in 1 POUCH (68968-6650-1)</PackageDescription>
<NDC11Code>68968-6650-03</NDC11Code>
<ProductNDC>68968-6650</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minivelle</ProprietaryName>
<NonProprietaryName>(estradiol Transdermal System)</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20121220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-10-10</LastUpdate>
</NDC>
<NDC>
<NDCCode>68968-6650-8</NDCCode>
<PackageDescription>8 POUCH in 1 PACKET (68968-6650-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-6650-08</NDC11Code>
<ProductNDC>68968-6650</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minivelle</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20121220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>MINIVELLE (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of MINIVELLE are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. MINIVELLE is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>68968-6675-3</NDCCode>
<PackageDescription>3 PACKET in 1 CARTON (68968-6675-3) > 8 POUCH in 1 PACKET > 1 FILM, EXTENDED RELEASE in 1 POUCH (68968-6675-1)</PackageDescription>
<NDC11Code>68968-6675-03</NDC11Code>
<ProductNDC>68968-6675</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minivelle</ProprietaryName>
<NonProprietaryName>(estradiol Transdermal System)</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20121220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-10-10</LastUpdate>
</NDC>
<NDC>
<NDCCode>68968-6675-8</NDCCode>
<PackageDescription>8 POUCH in 1 PACKET (68968-6675-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-6675-08</NDC11Code>
<ProductNDC>68968-6675</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minivelle</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20121220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>MINIVELLE (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of MINIVELLE are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. MINIVELLE is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0404-6625-05</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (0404-6625-05) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>00404-6625-05</NDC11Code>
<ProductNDC>0404-6625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Articaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Articaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20140128</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020971</ApplicationNumber>
<LabelerName>Henry Schein</LabelerName>
<SubstanceName>ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>40; .005</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.</IndicationAndUsage>
<Description>Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0409-6625-14</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-6625-14) / 50 mL in 1 VIAL, SINGLE-DOSE (0409-6625-22) </PackageDescription>
<NDC11Code>00409-6625-14</NDC11Code>
<ProductNDC>0409-6625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202432</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>84</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Bicarbonate Injection is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis – e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial – e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.</IndicationAndUsage>
<Description>Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 7.0 to 8.5. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3¯. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.</Description>
</NDC>
<NDC>
<NDCCode>0409-6625-35</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-6625-35) / 50 mL in 1 VIAL, SINGLE-DOSE (0409-6625-30) </PackageDescription>
<NDC11Code>00409-6625-35</NDC11Code>
<ProductNDC>0409-6625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202432</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>84</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Bicarbonate Injection is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis – e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial – e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.</IndicationAndUsage>
<Description>Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 7.0 to 8.5. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3–. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.</Description>
</NDC>
<NDC>
<NDCCode>51004-6625-5</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-6625-5) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-6625-05</NDC11Code>
<ProductNDC>51004-6625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Articaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Articaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20140128</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020971</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>40; .005</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.</IndicationAndUsage>
<Description>Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>61699-6625-2</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (61699-6625-2) > 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>61699-6625-02</NDC11Code>
<ProductNDC>61699-6625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20140703</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>US MedSource, LLC</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>84</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Sodium Bicarbonate Injection, USP is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of blood pigments. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis ― e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial ― e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.</IndicationAndUsage>
<Description>Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2%, 5.0%, 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. Solution in LVP container has 0.9 mg/mL of edetate disodium, anhydrous added as a stabilizer. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3¯. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.</Description>
</NDC>
<NDC>
<NDCCode>68968-0172-3</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (68968-0172-3) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-0172-03</NDC11Code>
<ProductNDC>68968-0172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Secuado</ProprietaryName>
<NonProprietaryName>Asenapine</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212268</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ASENAPINE</SubstanceName>
<StrengthNumber>3.8</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer.</Description>
</NDC>
<NDC>
<NDCCode>68968-0172-7</NDCCode>
<PackageDescription>7 POUCH in 1 CARTON (68968-0172-7) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-0172-07</NDC11Code>
<ProductNDC>68968-0172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Secuado</ProprietaryName>
<NonProprietaryName>Asenapine</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212268</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ASENAPINE</SubstanceName>
<StrengthNumber>3.8</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer.</Description>
</NDC>
<NDC>
<NDCCode>68968-0173-3</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (68968-0173-3) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-0173-03</NDC11Code>
<ProductNDC>68968-0173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Secuado</ProprietaryName>
<NonProprietaryName>Asenapine</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212268</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ASENAPINE</SubstanceName>
<StrengthNumber>5.7</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer.</Description>
</NDC>
<NDC>
<NDCCode>68968-0173-7</NDCCode>
<PackageDescription>7 POUCH in 1 CARTON (68968-0173-7) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-0173-07</NDC11Code>
<ProductNDC>68968-0173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Secuado</ProprietaryName>
<NonProprietaryName>Asenapine</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212268</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ASENAPINE</SubstanceName>
<StrengthNumber>5.7</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer.</Description>
</NDC>
<NDC>
<NDCCode>68968-0174-3</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (68968-0174-3) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-0174-03</NDC11Code>
<ProductNDC>68968-0174</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Secuado</ProprietaryName>
<NonProprietaryName>Asenapine</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212268</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ASENAPINE</SubstanceName>
<StrengthNumber>7.6</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer.</Description>
</NDC>
<NDC>
<NDCCode>68968-0174-7</NDCCode>
<PackageDescription>7 POUCH in 1 CARTON (68968-0174-7) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-0174-07</NDC11Code>
<ProductNDC>68968-0174</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Secuado</ProprietaryName>
<NonProprietaryName>Asenapine</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212268</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ASENAPINE</SubstanceName>
<StrengthNumber>7.6</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SECUADO is indicated for the treatment of adults with schizophrenia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>SECUADO transdermal system contains asenapine, an atypical antipsychotic. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical name is trans-5-chloro-2-methyl-2,3,3a,12b-tetrahydro-1H-dibenz[2,3:6,7] oxepino [4,5-c] pyrrole. Its molecular formula is C17H16Cl NO and its molecular weight is 285.8 g/mol. The chemical structure is. SECUADO is for transdermal administration and is provided in three strengths: 3.8 mg, 5.7 mg or 7.6 mg asenapine every 24 hours (Table 7). The composition of the transdermal systems per unit area is identical. Inactive ingredients include alicyclic saturated hydrocarbon resin, butylated hydroxytoluene, isopropyl palmitate, maleate salts (monosodium maleate and disodium maleate), mineral oil, polyester film backing, polyisobutylene, silicone-treated polyester release liner, sodium acetate anhydrous, and styrene-isoprene-styrene block copolymer.</Description>
</NDC>
<NDC>
<NDCCode>68968-0205-3</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (68968-0205-3) / 1 PATCH, EXTENDED RELEASE in 1 POUCH (68968-0205-1) </PackageDescription>
<NDC11Code>68968-0205-03</NDC11Code>
<ProductNDC>68968-0205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xelstrym</ProprietaryName>
<NonProprietaryName>Dextroamphetamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20230515</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215401</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>DEXTROAMPHETAMINE</SubstanceName>
<StrengthNumber>4.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XELSTRYM® is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see CLINICAL STUDIES (14)]. Limitations of Use. The use of XELSTRYM is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>XELSTRYM (dextroamphetamine) transdermal system, contains dextroamphetamine, a CNS stimulant. Dextroamphetamine is the dextro isomer of the compound d,l-amphetamine. The chemical name for dextroamphetamine is (2S)-1-phenylpropan-2-amine. It is a clear to slightly amber colored liquid. Molecular weight of dextroamphetamine is 135.21 g/mol and the molecular formula is C9H13N. The chemical structure is. XELSTRYM is provided in four strengths: 4.5 mg/9 hours, 9 mg/9 hours, 13.5 mg/9 hours, and 18 mg/9 hours. The composition per unit area of all dosage strengths is identical. Inactive ingredients include: acrylic adhesives, green ink, polyester/polyurethane backing, and polyester release liner. Table 4: XELSTRYM (dextroamphetamine) transdermal system. Transdermal System Components. XELSTRYM consists of three layers (Figure 1). The layers are (1) oversized protective silicone-coated polyester release liner that is removed and discarded prior to application (2) acrylic adhesive matrix containing dextroamphetamine, and (3) polyester and polyurethane laminate film (backing). Figure 1: XELSTRYM Transdermal System (Exploded View).</Description>
</NDC>
<NDC>
<NDCCode>68968-0210-3</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (68968-0210-3) / 1 PATCH, EXTENDED RELEASE in 1 POUCH (68968-0210-1) </PackageDescription>
<NDC11Code>68968-0210-03</NDC11Code>
<ProductNDC>68968-0210</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xelstrym</ProprietaryName>
<NonProprietaryName>Dextroamphetamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20230515</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215401</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>DEXTROAMPHETAMINE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XELSTRYM® is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see CLINICAL STUDIES (14)]. Limitations of Use. The use of XELSTRYM is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>XELSTRYM (dextroamphetamine) transdermal system, contains dextroamphetamine, a CNS stimulant. Dextroamphetamine is the dextro isomer of the compound d,l-amphetamine. The chemical name for dextroamphetamine is (2S)-1-phenylpropan-2-amine. It is a clear to slightly amber colored liquid. Molecular weight of dextroamphetamine is 135.21 g/mol and the molecular formula is C9H13N. The chemical structure is. XELSTRYM is provided in four strengths: 4.5 mg/9 hours, 9 mg/9 hours, 13.5 mg/9 hours, and 18 mg/9 hours. The composition per unit area of all dosage strengths is identical. Inactive ingredients include: acrylic adhesives, green ink, polyester/polyurethane backing, and polyester release liner. Table 4: XELSTRYM (dextroamphetamine) transdermal system. Transdermal System Components. XELSTRYM consists of three layers (Figure 1). The layers are (1) oversized protective silicone-coated polyester release liner that is removed and discarded prior to application (2) acrylic adhesive matrix containing dextroamphetamine, and (3) polyester and polyurethane laminate film (backing). Figure 1: XELSTRYM Transdermal System (Exploded View).</Description>
</NDC>
<NDC>
<NDCCode>68968-0215-3</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (68968-0215-3) / 1 PATCH, EXTENDED RELEASE in 1 POUCH (68968-0215-1) </PackageDescription>
<NDC11Code>68968-0215-03</NDC11Code>
<ProductNDC>68968-0215</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xelstrym</ProprietaryName>
<NonProprietaryName>Dextroamphetamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20230515</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215401</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>DEXTROAMPHETAMINE</SubstanceName>
<StrengthNumber>13.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XELSTRYM® is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see CLINICAL STUDIES (14)]. Limitations of Use. The use of XELSTRYM is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>XELSTRYM (dextroamphetamine) transdermal system, contains dextroamphetamine, a CNS stimulant. Dextroamphetamine is the dextro isomer of the compound d,l-amphetamine. The chemical name for dextroamphetamine is (2S)-1-phenylpropan-2-amine. It is a clear to slightly amber colored liquid. Molecular weight of dextroamphetamine is 135.21 g/mol and the molecular formula is C9H13N. The chemical structure is. XELSTRYM is provided in four strengths: 4.5 mg/9 hours, 9 mg/9 hours, 13.5 mg/9 hours, and 18 mg/9 hours. The composition per unit area of all dosage strengths is identical. Inactive ingredients include: acrylic adhesives, green ink, polyester/polyurethane backing, and polyester release liner. Table 4: XELSTRYM (dextroamphetamine) transdermal system. Transdermal System Components. XELSTRYM consists of three layers (Figure 1). The layers are (1) oversized protective silicone-coated polyester release liner that is removed and discarded prior to application (2) acrylic adhesive matrix containing dextroamphetamine, and (3) polyester and polyurethane laminate film (backing). Figure 1: XELSTRYM Transdermal System (Exploded View).</Description>
</NDC>
</NDCList>