{
"NDC": [
{
"NDCCode": "68982-633-02",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (68982-633-02) ",
"NDC11Code": "68982-0633-02",
"ProductNDC": "68982-633",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Albumin (human)",
"NonProprietaryName": "Albumin Human",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20061017",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125154",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "ALBUMIN HUMAN",
"StrengthNumber": "200",
"StrengthUnit": "g/1000mL",
"Pharm_Classes": "Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2020-04-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20061017",
"SamplePackage": "N",
"IndicationAndUsage": "ALBUMIN (HUMAN) 20% is indicated for the restoration and maintenance of circulating blood volume for. Hypovolemia. ( 1.1 ). Hypoalbuminemia. ( 1.2 ). Prevention of central volume depletion after paracentesis due to cirrhotic ascites. ( 1.3 ). Ovarian hyperstimulation syndrome (OHSS). ( 1.4 ). Adult respiratory distress syndrome (ARDS). ( 1.5 ). Acute nephrosis. ( 1.6 ). Hemolytic Disease of the Newborn (HDN). ( 1.7 ).",
"Description": "ALBUMIN (HUMAN) 20% is a sterile, liquid preparation of albumin derived from large pools of human plasma. All units of human plasma used in the manufacture of ALBUMIN (HUMAN) 20% are provided by FDA approved blood establishments only. The product is manufactured by cold ethanol fractionation followed by ultra- and diafiltration. The manufacturing process includes final container pasteurization and additional bulk pasteurization at 60 +/- 0.5°C for 10 – 11 hours. The ALBUMIN (HUMAN) 20% manufacturing process provides a significant viral reduction in in vitro studies (table 2). These reductions are achieved through a combination of process steps including cold ethanol fractionation and final container pasteurization. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma.[see Warnings and Precautions, Infection Risk from Human Plasma (5.7)]. Table 2 In vitro reduction factor during ALBUMIN (HUMAN) 20% manufacturing. PRV:Pseudorabies Virus. SBV: Sindbis Virus. HIV-1:Human Immunodeficiency Virus - 1. Reo 3:Reovirus Type 3. PPV:Porcine Parvovirus. HAV:Hepatitis A Virus. ALBUMIN (HUMAN) 20% is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The composition of ALBUMIN (HUMAN) 20% is as follows. ALBUMIN (HUMAN) 20% contains no preservatives and components used in its packaging are latex-free."
},
{
"NDCCode": "68982-633-01",
"PackageDescription": "50 mL in 1 BOTTLE, GLASS (68982-633-01) ",
"NDC11Code": "68982-0633-01",
"ProductNDC": "68982-633",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Albumin (human)",
"NonProprietaryName": "Albumin Human",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20061017",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125154",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "ALBUMIN HUMAN",
"StrengthNumber": "200",
"StrengthUnit": "g/1000mL",
"Pharm_Classes": "Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2020-04-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20061017",
"SamplePackage": "N",
"IndicationAndUsage": "ALBUMIN (HUMAN) 20% is indicated for the restoration and maintenance of circulating blood volume for. Hypovolemia. ( 1.1 ). Hypoalbuminemia. ( 1.2 ). Prevention of central volume depletion after paracentesis due to cirrhotic ascites. ( 1.3 ). Ovarian hyperstimulation syndrome (OHSS). ( 1.4 ). Adult respiratory distress syndrome (ARDS). ( 1.5 ). Acute nephrosis. ( 1.6 ). Hemolytic Disease of the Newborn (HDN). ( 1.7 ).",
"Description": "ALBUMIN (HUMAN) 20% is a sterile, liquid preparation of albumin derived from large pools of human plasma. All units of human plasma used in the manufacture of ALBUMIN (HUMAN) 20% are provided by FDA approved blood establishments only. The product is manufactured by cold ethanol fractionation followed by ultra- and diafiltration. The manufacturing process includes final container pasteurization and additional bulk pasteurization at 60 +/- 0.5°C for 10 – 11 hours. The ALBUMIN (HUMAN) 20% manufacturing process provides a significant viral reduction in in vitro studies (table 2). These reductions are achieved through a combination of process steps including cold ethanol fractionation and final container pasteurization. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma.[see Warnings and Precautions, Infection Risk from Human Plasma (5.7)]. Table 2 In vitro reduction factor during ALBUMIN (HUMAN) 20% manufacturing. PRV:Pseudorabies Virus. SBV: Sindbis Virus. HIV-1:Human Immunodeficiency Virus - 1. Reo 3:Reovirus Type 3. PPV:Porcine Parvovirus. HAV:Hepatitis A Virus. ALBUMIN (HUMAN) 20% is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The composition of ALBUMIN (HUMAN) 20% is as follows. ALBUMIN (HUMAN) 20% contains no preservatives and components used in its packaging are latex-free."
},
{
"NDCCode": "68982-182-02",
"PackageDescription": "10 mL in 1 VIAL (68982-182-02) ",
"NDC11Code": "68982-0182-02",
"ProductNDC": "68982-182",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Wilate - Von Willebrand Factor/coagulation Factor Viii Complex (human)",
"NonProprietaryName": "Von Willebrand Factor/coagulation Factor Viii Complex (human)",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20091204",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125251",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "ANTIHEMOPHILIC FACTOR HUMAN; VON WILLEBRAND FACTOR HUMAN",
"StrengthNumber": "100; 100",
"StrengthUnit": "[iU]/mL; [iU]/mL",
"Pharm_Classes": "Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Factor VIII [CS], Human Antihemophilic Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Activity [PE], Increased Platelet Aggregation [PE], von Willebrand Factor [CS]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091204",
"SamplePackage": "N",
"IndicationAndUsage": "WILATE is indicated in adult and pediatric patients with von Willebrand disease (VWD) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes.",
"Description": "WILATE is a human plasma-derived, sterile, purified, double virus inactivated von Willebrand Factor/Coagulation Factor VIII Complex. WILATE is supplied as a lyophilized powder for reconstitution for intravenous injection. The diluent for reconstitution of the lyophilized powder is Water for Injection with 0.1% Polysorbate 80. WILATE contains no preservative. No albumin is added as a stabilizer. WILATE is labeled with the actual VWF:RCo and FVIII activities in IU per vial. The VWF activity (VWF:RCo) is determined using a manual agglutination method referenced to the current “WHO International Standard for von Willebrand Factor Concentrate”. The FVIII activity is determined using a chromogenic substrate assay referenced to the current “WHO International Standard for Human Coagulation Factor VIII Concentrate”. The assay methodologies are according to European Pharmacopoeia (Ph.Eur.). The resulting specific activity of WILATE is ≥ 60 IU VWF:RCo and ≥ 60 IU FVIII activities per mg of total protein. The nominal composition of WILATE is as follows. Von Willebrand Factor/Coagulation Factor VIII complex is the active ingredient in WILATE. It is derived from large pools of human plasma collected in U.S. plasma donation centers. All plasma donations are tested for viral markers in compliance with requirements of EU CPMP and FDA guidance. In addition, the limit for the titer of human parvovirus B19 DNA in the manufacturing pool is set not to exceed 104 IU/mL. The product is manufactured from cryoprecipitate, which is reconstituted in a buffer and treated with aluminum hydroxide followed by two different chromatography steps, ultra- and diafiltration, and sterile filtration. The manufacturing process includes two virus inactivation steps, namely, treatment with an organic solvent/detergent (S/D) mixture, composed of tri-n-butyl phosphate (TNBP) and Octoxynol-9, and a terminal dry heat (TDH) treatment of the lyophilized product in final container [at +100°C (212°F) for 120 minutes at a specified residual moisture level of 0.7-1.6%]. In addition, the ion-exchange chromatography step utilized during WILATE manufacturing also removes some viruses. Table 6 Virus Reduction During WILATE Manufacturing. na: not applicable. nd: not done (S/D reagents present). HIV-1: Human Immunodeficiency Virus - 1. SBV: Sindbis Virus. BVDV: Bovine Viral Diarrhea Virus. PRV: Pseudorabies Virus. REO 3: Reovirus Type 3. HAV: Hepatitis A Virus. PPV: Porcine Parvovirus."
},
{
"NDCCode": "68982-261-02",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68982-261-02) / 40 mL in 1 VIAL, GLASS (68982-261-82) ",
"NDC11Code": "68982-0261-02",
"ProductNDC": "68982-261",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Balfaxar",
"NonProprietaryName": "Prothrombin Complex Concentrate (human)",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231130",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125776",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "COAGULATION FACTOR IX HUMAN; PROTHROMBIN; COAGULATION FACTOR VII HUMAN; COAGULATION FACTOR X HUMAN; PROTEIN C; PROTEIN S HUMAN",
"StrengthNumber": "25.5; 26; 16.5; 24; 22; 22",
"StrengthUnit": "[iU]/mL; [iU]/mL; [iU]/mL; [iU]/mL; [iU]/mL; [iU]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Blood Coagulation Factor [EPC], Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Decreased Coagulation Factor Activity [PE], Enzyme Precursors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Activity [PE], Increased Coagulation Activity [PE], Increased Coagulation Activity [PE], Protein C [CS]",
"Status": "Active",
"LastUpdate": "2023-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231130",
"SamplePackage": "N",
"IndicationAndUsage": "BALFAXAR (prothrombin complex concentrate, human-lans) is a blood coagulation factor replacement product indicated for the urgent reversal of acquired coagulation factor deficiency induced by Vitamin K antagonist (VKA, e.g., warfarin) therapy in adult patients with need for an urgent surgery/invasive procedure.",
"Description": "BALFAXAR is a human plasma-derived, purified, virus inactivated and nanofiltered non-activated Prothrombin Complex Concentrate (PCC) containing the coagulation factors II, VII, IX, and X and antithrombotic Proteins C and S. BALFAXAR is supplied as a lyophilized powder for reconstitution for intravenous use. The actual potency printed on the vial label represents the potency of Factor IX. BALFAXAR is sterile, endotoxin-free, and does not contain preservatives. No albumin is added as a stabilizer, and the excipients are heparin and sodium citrate. The diluent for reconstitution of the lyophilized powder is sterile Water for Injection. The composition of BALFAXAR is as follows. All human plasma used in the manufacture of BALFAXAR is obtained from U.S. donors, collected in FDA-approved blood and plasma establishments, and tested by FDA-licensed serological tests for viral markers (Hepatitis B surface antigen (HBsAg), antibodies to HIV-1/2 and HCV). The plasma is tested with Nucleic Acid Testing (NAT) for HCV, HIV-1, HAV, and HBV, and found to be non-reactive (negative), and the plasma is also tested by NAT for B19V to exclude donations with high titers. The limit for the titer of B19V DNA in the manufacturing pool is set not to exceed 10 4 IU/mL. Only plasma that passed virus screening is used for production. The BALFAXAR manufacturing process has the capability to clear viruses by a solvent/detergent (S/D) virus inactivation step and a virus removal nanofiltration step. The mean cumulative virus reduction factors of these steps are summarized in Table 4 . Table 4 Virus Reduction During BALFAXAR Manufacturing. n.a.: not applicable. BVDV: Bovine Viral Diarrhea Virus, model for HCV. PRV: Pseudorabies Virus, model for large enveloped DNA viruses, e.g., HBV. PPV: Porcine Parvovirus, model for B19V."
},
{
"NDCCode": "68982-349-02",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (68982-349-02) / 100 mL in 1 BOTTLE, GLASS (68982-349-82) ",
"NDC11Code": "68982-0349-02",
"ProductNDC": "68982-349",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Fibryga",
"NonProprietaryName": "Fibrinogen (human)",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241220",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125612",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "FIBRINOGEN HUMAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-08-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241220",
"SamplePackage": "N",
"Description": "FIBRYGA [fibrinogen (human)] is a human plasma-derived, sterile, purified, virus-inactivated and nanofiltered (20 nm) fibrinogen concentrate. FIBRYGA is supplied as a lyophilized powder, white or pale yellow in color, for reconstitution for intravenous use. FIBRYGA contains no preservatives. Each bottle contains approximately 1 g or 2 g of fibrinogen. The actual potency of fibrinogen in mg is stated on each FIBRYGA carton and bottle. The diluent for reconstitution of the lyophilized powder is 50 mL (1 g) or 100 mL (2 g) sterile Water for Injection. The nominal composition of FIBRYGA is as follows. All units of human plasma used in the manufacture of FIBRYGA are provided by FDA-approved blood establishments, and are tested by FDA-licensed serological tests for Hepatitis B surface antigen (HBsAg), antibodies to Hepatitis C Virus (HCV) and Human Immunodeficiency Virus (HIV)-1/2. As an additional safety measure, the plasma is tested with Nucleic Acid Tests (NATs) for Hepatitis A Virus (HAV), Hepatitis B Virus (HBV), HCV and HIV-1 and found to be non-reactive (negative). The plasma is also screened for Human Parvovirus (B19V) by NAT. The limit for B19V DNA in the mini-pool is set not to exceed 10 3 IU/mL. Only plasma that passed virus screening is used for production. The FIBRYGA manufacturing process includes a solvent/detergent (S/D) step for virus inactivation, and a nanofiltration step (Planova 20N nanofilter or Pegasus SV4 nanofilter) for virus removal. The mean cumulative virus reduction factors of these steps are summarized in Table 2 below. Table 2: Cumulative Virus Reduction Factors (Log 10 ) During FIBRYGA Manufacture. PRV: Pseudorabies Virus, model for large enveloped DNA viruses. BVDV: Bovine Virus Diarrhea Virus, model for HCV. PPV: Porcine Parvovirus, model for B19V. n.a.: not applicable. * When the nanofiltration step was performed using a Pegasus SV4 nanofilter, the virus reduction factors for HIV-1, PRV, BVDV, HAV, and PPV were ≥ 3.9, ≥ 6.3, ≥ 5.0, ≥ 5.2, and 4.5, respectively. The cumulative virus reduction factors (S/D treatment + Pegasus SV4 nanofiltration) were ≥ 9.0, ≥ 12.9, ≥ 10.8, ≥ 5.2, and 4.5, respectively."
},
{
"NDCCode": "68982-623-02",
"PackageDescription": "250 mL in 1 BOTTLE, GLASS (68982-623-02) ",
"NDC11Code": "68982-0623-02",
"ProductNDC": "68982-623",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Albumin (human)",
"NonProprietaryName": "Albumin Human",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20061017",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125154",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "ALBUMIN HUMAN",
"StrengthNumber": "50",
"StrengthUnit": "g/1000mL",
"Pharm_Classes": "Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2020-04-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20061017",
"SamplePackage": "N",
"IndicationAndUsage": "ALBUMIN (HUMAN) 5% is indicated for the restoration and maintenance of circulating blood volume for. Hypovolemia. ( 1.1 ). Hypoalbuminemia. ( 1.2 ). Prevention of central volume depletion after paracentesis due to cirrhotic ascites. ( 1.3 ).",
"Description": "ALBUMIN (HUMAN) 5% is a sterile, liquid preparation of albumin derived from large pools of human plasma. All units of human plasma used in the manufacture of ALBUMIN (HUMAN) 5% are provided by FDA approved blood establishments only. The product is manufactured by cold ethanol fractionation followed by ultra- and diafiltration. The manufacturing process includes final container pasteurization and additional bulk pasteurization at 60 +/- 0.5°C for 10 – 11 hours. The ALBUMIN (HUMAN) 5% manufacturing process provides a significant viral reduction in in vitro studies (table 2). These reductions are achieved through a combination of process steps including cold ethanol fractionation and final container pasteurization. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma. [see Warnings and Precautions, Infection Risk from Human Plasma (5.7)]. Table 2 In vitro reduction factor during ALBUMIN (HUMAN) 5% manufacturing. PRV: Pseudorabies Virus. SBV: Sindbis Virus. HIV-1: Human Immunodeficiency Virus - 1. Reo 3: Reovirus Type 3. PPV: Porcine Parvovirus. HAV: Hepatitis A Virus. ALBUMIN (HUMAN) 5% is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The composition of ALBUMIN (HUMAN) 5% is as follows. ALBUMIN (HUMAN) 5% contains no preservatives and components used in its packaging are latex-free."
},
{
"NDCCode": "68982-643-02",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (68982-643-02) ",
"NDC11Code": "68982-0643-02",
"ProductNDC": "68982-643",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Albumin (human)",
"NonProprietaryName": "Albumin Human",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20061017",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125154",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "ALBUMIN HUMAN",
"StrengthNumber": "250",
"StrengthUnit": "g/1000mL",
"Pharm_Classes": "Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2020-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20061017",
"SamplePackage": "N",
"IndicationAndUsage": "ALBUMIN (HUMAN) 25% is indicated for the restoration and maintenance of circulating blood volume for. Hypovolemia. ( 1.1 ). Hypoalbuminemia. ( 1.2 ). Prevention of central volume depletion after paracentesis due to cirrhotic ascites. ( 1.3 ). Ovarian hyperstimulation syndrome (OHSS). ( 1.4 ). Adult respiratory distress syndrome (ARDS). ( 1.5 ). Acute nephrosis. ( 1.6 ). Hemolytic disease of the newborn (HDN). ( 1.7 ).",
"Description": "ALBUMIN (HUMAN) 25% is a sterile, liquid preparation of albumin derived from large pools of human plasma. All units of human plasma used in the manufacture of ALBUMIN (HUMAN) 25% are provided by FDA approved blood establishments only. The product is manufactured by cold ethanol fractionation followed by ultra- and diafiltration. The manufacturing process includes final container pasteurization and additional bulk pasteurization at 60 +/- 0.5°C for 10 – 11 hours. The ALBUMIN (HUMAN) 25% manufacturing process provides a significant viral reduction in in vitro studies (table 3). These reductions are achieved through a combination of process steps including cold ethanol fractionation and final container pasteurization. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma. [see Warnings and Precautions, Infection Risk from Human Plasma (5.7)]. Table 3 In vitro reduction factor during ALBUMIN (HUMAN) 25% manufacturing. PRV: Pseudorabies Virus. SBV: Sindbis Virus. HIV-1: Human Immunodeficiency Virus - 1. Reo 3: Reovirus Type 3. PPV: Porcine Parvovirus. HAV: Hepatitis A Virus. ALBUMIN (HUMAN) 25% is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The composition of ALBUMIN (HUMAN) 25% is as follows. ALBUMIN (HUMAN) 25% contains no preservatives and components used in its packaging are latex-free."
},
{
"NDCCode": "68982-810-02",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68982-810-02) > 10 mL in 1 VIAL, GLASS (68982-810-82) ",
"NDC11Code": "68982-0810-02",
"ProductNDC": "68982-810",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Cutaquig",
"NonProprietaryName": "Immunoglobulin G",
"DosageFormName": "SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190503",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125668",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "165",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.",
"Description": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable."
},
{
"NDCCode": "68982-820-02",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (68982-820-02) > 25 mL in 1 BOTTLE, GLASS (68982-820-82) ",
"NDC11Code": "68982-0820-02",
"ProductNDC": "68982-820",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181112",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20181112",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 90% monomers and dimers, and not more than 3% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "68982-822-02",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (68982-822-02) / 25 mL in 1 BOTTLE, GLASS (68982-822-82) ",
"NDC11Code": "68982-0822-02",
"ProductNDC": "68982-822",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181112",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181112",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "68982-840-02",
"PackageDescription": "50 mL in 1 BOTTLE, GLASS (68982-840-02) ",
"NDC11Code": "68982-0840-02",
"ProductNDC": "68982-840",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Octagam Immune Globulin (human)",
"NonProprietaryName": "Immune Globulin",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040521",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125062",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-11-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040521",
"SamplePackage": "N",
"IndicationAndUsage": "Octagam is an immune globulin intravenous (human), 5% liquid, indicated for treatment of primary humoral immunodeficiency (PI) ( 1 ).",
"Description": "Immune Globulin Intravenous (Human), Octagam 5% liquid, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. Octagam 5% liquid is a solution for infusion which must be administered intravenously. All units of human plasma used in the manufacture of Octagam 5% liquid are provided by FDA-approved blood establishments only, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Triton X-100 (Octoxynol). The Octagam 5% liquid manufacturing process provides a significant viral reduction in in vitro studies (Table 3). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 3: In vitro reduction factor during Octagam 5% liquid manufacturing. *not calculated for global LRF. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus. SBV: Sindbis Virus. MEV: Mouse Encephalomyelitis Virus. PPV: Porcine Parvovirus."
},
{
"NDCCode": "68982-850-02",
"PackageDescription": "50 mL in 1 BOTTLE, GLASS (68982-850-02) ",
"NDC11Code": "68982-0850-02",
"ProductNDC": "68982-850",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Octagam Immune Globulin (human)",
"NonProprietaryName": "Immune Globulin",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040521",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125062",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-04-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040521",
"SamplePackage": "N",
"IndicationAndUsage": "Octagam 10% is an immune globulin intravenous (human) liquid preparation indicated for the treatment of. Chronic immune thrombocytopenic purpura (ITP) in adults ( 1.1 ). Dermatomyositis (DM) in adults ( 1.2 ).",
"Description": "Immune Globulin Intravenous (Human), Octagam 10%, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. Octagam 10% is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%) of which not less than 96% is normal human immunoglobulin G. Octagam 10% contains not more than 3% aggregates, not less than 94% monomers and dimers and not more than 3% fragments. On average, the product contains 106 µg/mL of IgA and even lower amounts of IgM. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 4.5 and 5.0. The osmolality is 310 - 380 mosmol/kg. The manufacturing process for Octagam 10% isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact Octagam 10% contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 30%, IgG 3 is 3% and IgG 4 is 2%. Octagam 10% contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (90 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of Octagam 10% are provided by FDA-approved blood establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Triton X-100 (Octoxynol). The Octagam 10% manufacturing process shows significant viral reduction in in vitro studies (Table 6). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6: In vitro reduction factor during Octagam 10% manufacturing. *not calculated for global LRF. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus. SBV: Sindbis Virus. MEV: Mouse Encephalomyelitis Virus. PPV: Porcine Parvovirus."
},
{
"NDCCode": "10019-633-02",
"PackageDescription": "10 VIAL in 1 PACKAGE (10019-633-02) > 8 mL in 1 VIAL (10019-633-33)",
"NDC11Code": "10019-0633-02",
"ProductNDC": "10019-633",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin, Sulbactam",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20100224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065406",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "250; 125",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2015-11-18"
},
{
"NDCCode": "10967-633-02",
"PackageDescription": "59 mL in 1 CONTAINER (10967-633-02) ",
"NDC11Code": "10967-0633-02",
"ProductNDC": "10967-633",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Revlon Mitchum Clinical Gel",
"NonProprietaryName": "Aluminum Zirconium Octachlorohydrex Gly Liquid",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151130",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M019",
"LabelerName": "Revlon Consumer Products Corp",
"SubstanceName": "ALUMINUM ZIRCONIUM OCTACHLOROHYDREX GLY",
"StrengthNumber": ".2",
"StrengthUnit": "g/mL",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151130",
"SamplePackage": "N",
"IndicationAndUsage": "Reduces underarm wetness."
},
{
"NDCCode": "16714-633-02",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (16714-633-02) / 4 TABLET in 1 BLISTER PACK",
"NDC11Code": "16714-0633-02",
"ProductNDC": "16714-633",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090124",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "70",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080804",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for. Limitations of use:Optimal duration of use has not been determined. For patients at low-risk for fracture, consider drug discontinuation after 3 to 5 years of use. (1.6).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "49967-633-02",
"PackageDescription": "1 JAR in 1 CARTON (49967-633-02) / 50 g in 1 JAR",
"NDC11Code": "49967-0633-02",
"ProductNDC": "49967-633",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lancome Paris Renergie Lift Multiaction Sunscreen Broad Spectrum Spf 15 Lift And Firming Face And Neck All Skin Types",
"NonProprietaryName": "Avobenzone, Octisalate And Octocrylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20161227",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "L'Oreal USA Products Inc",
"SubstanceName": "AVOBENZONE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "30; 50; 70",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Status": "Active",
"LastUpdate": "2023-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161227",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "51316-633-02",
"PackageDescription": "2 BOTTLE in 1 CARTON (51316-633-02) / 2.5 mL in 1 BOTTLE (51316-633-01) ",
"NDC11Code": "51316-0633-02",
"ProductNDC": "51316-633",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief Eye Drops",
"NonProprietaryName": "Olopatadine Hydrochloride Ophthalmic",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213514",
"LabelerName": "CVS Pharmacy",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "7",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves itchy eyes due to pollen, ragweed, grass, animal hair and dander."
},
{
"NDCCode": "55648-633-02",
"PackageDescription": "10 VIAL in 1 CARTON (55648-633-02) > 1 mL in 1 VIAL",
"NDC11Code": "55648-0633-02",
"ProductNDC": "55648-633",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Octreotide Acetate",
"NonProprietaryName": "Octreotide Acetate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20110511",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090985",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "OCTREOTIDE ACETATE",
"StrengthNumber": "100",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Somatostatin Analog [EPC],Somatostatin Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Octreotide acetate injection is indicated to reduce blood levels of growth hormone and IGF-I (somatomedin C) in acromegaly patients who have had inadequate response to or cannot be treated with surgical resection, pituitary irradiation, and bromocriptine mesylate at maximally tolerated doses. The goal is to achieve normalization of growth hormone and IGF-I (somatomedin C) levels (see DOSAGE AND ADMINISTRATION). In patients with acromegaly, octreotide acetate reduces growth hormone to within normal ranges in 50% of patients and reduces IGF-I (somatomedin C) to within normal ranges in 50%-60% of patients. Since the effects of pituitary irradiation may not become maximal for several years, adjunctive therapy with octreotide acetate to reduce blood levels of growth hormone and IGF-I (somatomedin C) offers potential benefit before the effects of irradiation are manifested. Improvement in clinical signs and symptoms or reduction in tumor size or rate of growth were not shown in clinical trials performed with octreotide acetate; these trials were not optimally designed to detect such effects.",
"Description": "Octreotide acetate injection, a cyclic octapeptide prepared as a clear sterile solution of octreotide, acetate salt, in a buffered glacial acetic acid solution for administration by deep subcutaneous (intrafat) or intravenous injection. Octreotide acetate, known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxymethyl) propyl]-, cyclic (2→7)-disulfide; [R-(R*, R*)] acetate salt, is a long-acting octapeptide with pharmacologic actions mimicking those of the natural hormone somatostatin. Each mL of single dose vial contains octreotide (as acetate), either 50 mcg (0.05 mg), 100 mcg (0.1 mg) or 500 mcg (0.5 mg) with 7 mg sodium chloride USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. Each mL of multi dose vial contains octreotide (as acetate), either 200 mcg or 1000 mcg with 7 mg sodium chloride USP, 5 mg phenol USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. The molecular weight of octreotide acetate is 1019.3 (free peptide, C49H66N10O10S2) and its amino acid sequence is."
},
{
"NDCCode": "63545-633-02",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (63545-633-02) ",
"NDC11Code": "63545-0633-02",
"ProductNDC": "63545-633",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Biotitum",
"NonProprietaryName": "Biotitum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220509",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "BIOTIN",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-05-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220509",
"SamplePackage": "N"
},
{
"NDCCode": "64679-633-02",
"PackageDescription": "10 VIAL in 1 CARTON (64679-633-02) > 1 mL in 1 VIAL",
"NDC11Code": "64679-0633-02",
"ProductNDC": "64679-633",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Octreotide Acetate",
"NonProprietaryName": "Octreotide Acetate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20110511",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090985",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "OCTREOTIDE ACETATE",
"StrengthNumber": "100",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Somatostatin Analog [EPC],Somatostatin Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Octreotide acetate injection is indicated to reduce blood levels of growth hormone and IGF-I (somatomedin C) in acromegaly patients who have had inadequate response to or cannot be treated with surgical resection, pituitary irradiation, and bromocriptine mesylate at maximally tolerated doses. The goal is to achieve normalization of growth hormone and IGF-I (somatomedin C) levels (see DOSAGE AND ADMINISTRATION). In patients with acromegaly, octreotide acetate reduces growth hormone to within normal ranges in 50% of patients and reduces IGF-I (somatomedin C) to within normal ranges in 50%-60% of patients. Since the effects of pituitary irradiation may not become maximal for several years, adjunctive therapy with octreotide acetate to reduce blood levels of growth hormone and IGF-I (somatomedin C) offers potential benefit before the effects of irradiation are manifested. Improvement in clinical signs and symptoms or reduction in tumor size or rate of growth were not shown in clinical trials performed with octreotide acetate; these trials were not optimally designed to detect such effects.",
"Description": "Octreotide acetate injection, a cyclic octapeptide prepared as a clear sterile solution of octreotide, acetate salt, in a buffered glacial acetic acid solution for administration by deep subcutaneous (intrafat) or intravenous injection. Octreotide acetate, known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxymethyl) propyl]-, cyclic (2→7)-disulfide; [R-(R*, R*)] acetate salt, is a long-acting octapeptide with pharmacologic actions mimicking those of the natural hormone somatostatin. Each mL of single dose vial contains octreotide (as acetate), either 50 mcg (0.05 mg), 100 mcg (0.1 mg) or 500 mcg (0.5 mg) with 7 mg sodium chloride USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. Each mL of multi dose vial contains octreotide (as acetate), either 200 mcg or 1000 mcg with 7 mg sodium chloride USP, 5 mg phenol USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. The molecular weight of octreotide acetate is 1019.3 (free peptide, C49H66N10O10S2) and its amino acid sequence is."
},
{
"NDCCode": "67467-633-02",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (67467-633-02)",
"NDC11Code": "67467-0633-02",
"ProductNDC": "67467-633",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albumin (human)",
"NonProprietaryName": "Albumin Human",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20061017",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125154",
"LabelerName": "Octapharma Pharmazeutika Produktionsgesellschaft m.b.H.",
"SubstanceName": "ALBUMIN (HUMAN)",
"StrengthNumber": "200",
"StrengthUnit": "g/1000mL",
"Pharm_Classes": "Human Serum Albumin [EPC],Increased Intravascular Volume [PE],Increased Oncotic Pressure [PE],Osmotic Activity [MoA],Serum Albumin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "ALBUMIN (HUMAN) 20% is indicated for the restoration and maintenance of circulating blood volume for. Hypovolemia. (1.1). Hypoalbuminemia. (1.2). Prevention of central volume depletion after paracentesis due to cirrhotic ascites. (1.3). Ovarian hyperstimulation syndrome (OHSS). (1.4). Adult respiratory distress syndrome (ARDS). (1.5). Acute nephrosis. (1.6). Hemolytic Disease of the Newborn (HDN). (1.7).",
"Description": "ALBUMIN (HUMAN) 20% is a sterile, liquid preparation of albumin derived from large pools of human plasma. All units of human plasma used in the manufacture of ALBUMIN (HUMAN) 20% are provided by FDA approved blood establishments only. The product is manufactured by cold ethanol fractionation followed by ultra- and diafiltration. The manufacturing process includes final container pasteurization and additional bulk pasteurization at 60 +/- 0.5°C for 10 – 11 hours. The ALBUMIN (HUMAN) 20% manufacturing process provides a significant viral reduction in in vitro studies (table 2). These reductions are achieved through a combination of process steps including Cohn fractionation and final container pasteurization. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma.[see Warnings and Precautions, Infection Risk from Human Plasma (5.7)]. Table 2 In vitro reduction factor during ALBUMIN (HUMAN) 20% manufacturing. PRV:Pseudorabies Virus. SBV: Sindbis Virus. HIV-1:Human Immunodeficiency Virus - 1. Reo 3:Reovirus Type 3. PPV:Porcine Parvovirus. HAV:Hepatitis A Virus. ALBUMIN (HUMAN) 20% is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The composition of ALBUMIN (HUMAN) 20% is as follows. ALBUMIN (HUMAN) 20% contains no preservatives and components used in its packaging are latex-free."
},
{
"NDCCode": "70341-633-02",
"PackageDescription": "1 CONTAINER in 1 CARTON (70341-633-02) > 45 g in 1 CONTAINER (70341-633-01) ",
"NDC11Code": "70341-0633-02",
"ProductNDC": "70341-633",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Eco Soul Real Cover Bb 23 Natural Beige",
"NonProprietaryName": "Titanium Dioxide, Octinoxate, Octisalate, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180501",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "The Saem International Co., Ltd.",
"SubstanceName": "TITANIUM DIOXIDE; OCTINOXATE; OCTISALATE; ZINC OXIDE",
"StrengthNumber": "3.43; 3.37; 2.25; 2.25",
"StrengthUnit": "g/45g; g/45g; g/45g; g/45g",
"Status": "Deprecated",
"LastUpdate": "2019-12-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20180501",
"SamplePackage": "N"
},
{
"NDCCode": "75936-633-02",
"PackageDescription": "1 TUBE in 1 BOX (75936-633-02) / 35 mL in 1 TUBE (75936-633-01) ",
"NDC11Code": "75936-0633-02",
"ProductNDC": "75936-633",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Protectint 42c",
"NonProprietaryName": "Homosalate, Octisalate, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20231122",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Supergoop, LLC",
"SubstanceName": "HOMOSALATE; ZINC OXIDE; OCTISALATE",
"StrengthNumber": "7; 13.58; 5",
"StrengthUnit": "g/100mL; g/100mL; g/100mL",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231122",
"SamplePackage": "N",
"IndicationAndUsage": "Stop use and ask a doctor if rash occurs."
},
{
"NDCCode": "0074-1050-01",
"PackageDescription": "1 SYRINGE in 1 CARTON (0074-1050-01) / 1 mL in 1 SYRINGE",
"NDC11Code": "00074-1050-01",
"ProductNDC": "0074-1050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20210426",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "RISANKIZUMAB",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210426",
"SamplePackage": "N",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-1050-70",
"PackageDescription": "1 SYRINGE in 1 CARTON (0074-1050-70) / 1 mL in 1 SYRINGE",
"NDC11Code": "00074-1050-70",
"ProductNDC": "0074-1050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20210426",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "RISANKIZUMAB",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210426",
"SamplePackage": "Y",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-1065-01",
"PackageDescription": "1 KIT in 1 CARTON (0074-1065-01) * 1.2 mL in 1 CARTRIDGE (0074-1066-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-01) ",
"NDC11Code": "00074-1065-01",
"ProductNDC": "0074-1065",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220923",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220923",
"SamplePackage": "N",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-1065-02",
"PackageDescription": "1 KIT in 1 CARTON (0074-1065-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-01) ",
"NDC11Code": "00074-1065-02",
"ProductNDC": "0074-1065",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220923",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220923",
"SamplePackage": "Y",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-1070-01",
"PackageDescription": "1 KIT in 1 CARTON (0074-1070-01) * 2.4 mL in 1 CARTRIDGE (0074-1069-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-01) ",
"NDC11Code": "00074-1070-01",
"ProductNDC": "0074-1070",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220616",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220616",
"SamplePackage": "N",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-1070-02",
"PackageDescription": "1 KIT in 1 CARTON (0074-1070-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-01) ",
"NDC11Code": "00074-1070-02",
"ProductNDC": "0074-1070",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220616",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220616",
"SamplePackage": "Y",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-2100-01",
"PackageDescription": "1 SYRINGE in 1 CARTON (0074-2100-01) / 1 mL in 1 SYRINGE",
"NDC11Code": "00074-2100-01",
"ProductNDC": "0074-2100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20210426",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "RISANKIZUMAB",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210426",
"SamplePackage": "N",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68982-633-02</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (68982-633-02) </PackageDescription>
<NDC11Code>68982-0633-02</NDC11Code>
<ProductNDC>68982-633</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Albumin (human)</ProprietaryName>
<NonProprietaryName>Albumin Human</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20061017</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125154</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>ALBUMIN HUMAN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-04-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ALBUMIN (HUMAN) 20% is indicated for the restoration and maintenance of circulating blood volume for. Hypovolemia. ( 1.1 ). Hypoalbuminemia. ( 1.2 ). Prevention of central volume depletion after paracentesis due to cirrhotic ascites. ( 1.3 ). Ovarian hyperstimulation syndrome (OHSS). ( 1.4 ). Adult respiratory distress syndrome (ARDS). ( 1.5 ). Acute nephrosis. ( 1.6 ). Hemolytic Disease of the Newborn (HDN). ( 1.7 ).</IndicationAndUsage>
<Description>ALBUMIN (HUMAN) 20% is a sterile, liquid preparation of albumin derived from large pools of human plasma. All units of human plasma used in the manufacture of ALBUMIN (HUMAN) 20% are provided by FDA approved blood establishments only. The product is manufactured by cold ethanol fractionation followed by ultra- and diafiltration. The manufacturing process includes final container pasteurization and additional bulk pasteurization at 60 +/- 0.5°C for 10 – 11 hours. The ALBUMIN (HUMAN) 20% manufacturing process provides a significant viral reduction in in vitro studies (table 2). These reductions are achieved through a combination of process steps including cold ethanol fractionation and final container pasteurization. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma.[see Warnings and Precautions, Infection Risk from Human Plasma (5.7)]. Table 2 In vitro reduction factor during ALBUMIN (HUMAN) 20% manufacturing. PRV:Pseudorabies Virus. SBV: Sindbis Virus. HIV-1:Human Immunodeficiency Virus - 1. Reo 3:Reovirus Type 3. PPV:Porcine Parvovirus. HAV:Hepatitis A Virus. ALBUMIN (HUMAN) 20% is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The composition of ALBUMIN (HUMAN) 20% is as follows. ALBUMIN (HUMAN) 20% contains no preservatives and components used in its packaging are latex-free.</Description>
</NDC>
<NDC>
<NDCCode>68982-633-01</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE, GLASS (68982-633-01) </PackageDescription>
<NDC11Code>68982-0633-01</NDC11Code>
<ProductNDC>68982-633</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Albumin (human)</ProprietaryName>
<NonProprietaryName>Albumin Human</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20061017</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125154</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>ALBUMIN HUMAN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-04-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ALBUMIN (HUMAN) 20% is indicated for the restoration and maintenance of circulating blood volume for. Hypovolemia. ( 1.1 ). Hypoalbuminemia. ( 1.2 ). Prevention of central volume depletion after paracentesis due to cirrhotic ascites. ( 1.3 ). Ovarian hyperstimulation syndrome (OHSS). ( 1.4 ). Adult respiratory distress syndrome (ARDS). ( 1.5 ). Acute nephrosis. ( 1.6 ). Hemolytic Disease of the Newborn (HDN). ( 1.7 ).</IndicationAndUsage>
<Description>ALBUMIN (HUMAN) 20% is a sterile, liquid preparation of albumin derived from large pools of human plasma. All units of human plasma used in the manufacture of ALBUMIN (HUMAN) 20% are provided by FDA approved blood establishments only. The product is manufactured by cold ethanol fractionation followed by ultra- and diafiltration. The manufacturing process includes final container pasteurization and additional bulk pasteurization at 60 +/- 0.5°C for 10 – 11 hours. The ALBUMIN (HUMAN) 20% manufacturing process provides a significant viral reduction in in vitro studies (table 2). These reductions are achieved through a combination of process steps including cold ethanol fractionation and final container pasteurization. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma.[see Warnings and Precautions, Infection Risk from Human Plasma (5.7)]. Table 2 In vitro reduction factor during ALBUMIN (HUMAN) 20% manufacturing. PRV:Pseudorabies Virus. SBV: Sindbis Virus. HIV-1:Human Immunodeficiency Virus - 1. Reo 3:Reovirus Type 3. PPV:Porcine Parvovirus. HAV:Hepatitis A Virus. ALBUMIN (HUMAN) 20% is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The composition of ALBUMIN (HUMAN) 20% is as follows. ALBUMIN (HUMAN) 20% contains no preservatives and components used in its packaging are latex-free.</Description>
</NDC>
<NDC>
<NDCCode>68982-182-02</NDCCode>
<PackageDescription>10 mL in 1 VIAL (68982-182-02) </PackageDescription>
<NDC11Code>68982-0182-02</NDC11Code>
<ProductNDC>68982-182</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Wilate - Von Willebrand Factor/coagulation Factor Viii Complex (human)</ProprietaryName>
<NonProprietaryName>Von Willebrand Factor/coagulation Factor Viii Complex (human)</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20091204</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125251</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>ANTIHEMOPHILIC FACTOR HUMAN; VON WILLEBRAND FACTOR HUMAN</SubstanceName>
<StrengthNumber>100; 100</StrengthNumber>
<StrengthUnit>[iU]/mL; [iU]/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Factor VIII [CS], Human Antihemophilic Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Activity [PE], Increased Platelet Aggregation [PE], von Willebrand Factor [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>WILATE is indicated in adult and pediatric patients with von Willebrand disease (VWD) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes.</IndicationAndUsage>
<Description>WILATE is a human plasma-derived, sterile, purified, double virus inactivated von Willebrand Factor/Coagulation Factor VIII Complex. WILATE is supplied as a lyophilized powder for reconstitution for intravenous injection. The diluent for reconstitution of the lyophilized powder is Water for Injection with 0.1% Polysorbate 80. WILATE contains no preservative. No albumin is added as a stabilizer. WILATE is labeled with the actual VWF:RCo and FVIII activities in IU per vial. The VWF activity (VWF:RCo) is determined using a manual agglutination method referenced to the current “WHO International Standard for von Willebrand Factor Concentrate”. The FVIII activity is determined using a chromogenic substrate assay referenced to the current “WHO International Standard for Human Coagulation Factor VIII Concentrate”. The assay methodologies are according to European Pharmacopoeia (Ph.Eur.). The resulting specific activity of WILATE is ≥ 60 IU VWF:RCo and ≥ 60 IU FVIII activities per mg of total protein. The nominal composition of WILATE is as follows. Von Willebrand Factor/Coagulation Factor VIII complex is the active ingredient in WILATE. It is derived from large pools of human plasma collected in U.S. plasma donation centers. All plasma donations are tested for viral markers in compliance with requirements of EU CPMP and FDA guidance. In addition, the limit for the titer of human parvovirus B19 DNA in the manufacturing pool is set not to exceed 104 IU/mL. The product is manufactured from cryoprecipitate, which is reconstituted in a buffer and treated with aluminum hydroxide followed by two different chromatography steps, ultra- and diafiltration, and sterile filtration. The manufacturing process includes two virus inactivation steps, namely, treatment with an organic solvent/detergent (S/D) mixture, composed of tri-n-butyl phosphate (TNBP) and Octoxynol-9, and a terminal dry heat (TDH) treatment of the lyophilized product in final container [at +100°C (212°F) for 120 minutes at a specified residual moisture level of 0.7-1.6%]. In addition, the ion-exchange chromatography step utilized during WILATE manufacturing also removes some viruses. Table 6 Virus Reduction During WILATE Manufacturing. na: not applicable. nd: not done (S/D reagents present). HIV-1: Human Immunodeficiency Virus - 1. SBV: Sindbis Virus. BVDV: Bovine Viral Diarrhea Virus. PRV: Pseudorabies Virus. REO 3: Reovirus Type 3. HAV: Hepatitis A Virus. PPV: Porcine Parvovirus.</Description>
</NDC>
<NDC>
<NDCCode>68982-261-02</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68982-261-02) / 40 mL in 1 VIAL, GLASS (68982-261-82) </PackageDescription>
<NDC11Code>68982-0261-02</NDC11Code>
<ProductNDC>68982-261</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Balfaxar</ProprietaryName>
<NonProprietaryName>Prothrombin Complex Concentrate (human)</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231130</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125776</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>COAGULATION FACTOR IX HUMAN; PROTHROMBIN; COAGULATION FACTOR VII HUMAN; COAGULATION FACTOR X HUMAN; PROTEIN C; PROTEIN S HUMAN</SubstanceName>
<StrengthNumber>25.5; 26; 16.5; 24; 22; 22</StrengthNumber>
<StrengthUnit>[iU]/mL; [iU]/mL; [iU]/mL; [iU]/mL; [iU]/mL; [iU]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Blood Coagulation Factor [EPC], Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Decreased Coagulation Factor Activity [PE], Enzyme Precursors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Activity [PE], Increased Coagulation Activity [PE], Increased Coagulation Activity [PE], Protein C [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BALFAXAR (prothrombin complex concentrate, human-lans) is a blood coagulation factor replacement product indicated for the urgent reversal of acquired coagulation factor deficiency induced by Vitamin K antagonist (VKA, e.g., warfarin) therapy in adult patients with need for an urgent surgery/invasive procedure.</IndicationAndUsage>
<Description>BALFAXAR is a human plasma-derived, purified, virus inactivated and nanofiltered non-activated Prothrombin Complex Concentrate (PCC) containing the coagulation factors II, VII, IX, and X and antithrombotic Proteins C and S. BALFAXAR is supplied as a lyophilized powder for reconstitution for intravenous use. The actual potency printed on the vial label represents the potency of Factor IX. BALFAXAR is sterile, endotoxin-free, and does not contain preservatives. No albumin is added as a stabilizer, and the excipients are heparin and sodium citrate. The diluent for reconstitution of the lyophilized powder is sterile Water for Injection. The composition of BALFAXAR is as follows. All human plasma used in the manufacture of BALFAXAR is obtained from U.S. donors, collected in FDA-approved blood and plasma establishments, and tested by FDA-licensed serological tests for viral markers (Hepatitis B surface antigen (HBsAg), antibodies to HIV-1/2 and HCV). The plasma is tested with Nucleic Acid Testing (NAT) for HCV, HIV-1, HAV, and HBV, and found to be non-reactive (negative), and the plasma is also tested by NAT for B19V to exclude donations with high titers. The limit for the titer of B19V DNA in the manufacturing pool is set not to exceed 10 4 IU/mL. Only plasma that passed virus screening is used for production. The BALFAXAR manufacturing process has the capability to clear viruses by a solvent/detergent (S/D) virus inactivation step and a virus removal nanofiltration step. The mean cumulative virus reduction factors of these steps are summarized in Table 4 . Table 4 Virus Reduction During BALFAXAR Manufacturing. n.a.: not applicable. BVDV: Bovine Viral Diarrhea Virus, model for HCV. PRV: Pseudorabies Virus, model for large enveloped DNA viruses, e.g., HBV. PPV: Porcine Parvovirus, model for B19V.</Description>
</NDC>
<NDC>
<NDCCode>68982-349-02</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (68982-349-02) / 100 mL in 1 BOTTLE, GLASS (68982-349-82) </PackageDescription>
<NDC11Code>68982-0349-02</NDC11Code>
<ProductNDC>68982-349</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Fibryga</ProprietaryName>
<NonProprietaryName>Fibrinogen (human)</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241220</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125612</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>FIBRINOGEN HUMAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>FIBRYGA [fibrinogen (human)] is a human plasma-derived, sterile, purified, virus-inactivated and nanofiltered (20 nm) fibrinogen concentrate. FIBRYGA is supplied as a lyophilized powder, white or pale yellow in color, for reconstitution for intravenous use. FIBRYGA contains no preservatives. Each bottle contains approximately 1 g or 2 g of fibrinogen. The actual potency of fibrinogen in mg is stated on each FIBRYGA carton and bottle. The diluent for reconstitution of the lyophilized powder is 50 mL (1 g) or 100 mL (2 g) sterile Water for Injection. The nominal composition of FIBRYGA is as follows. All units of human plasma used in the manufacture of FIBRYGA are provided by FDA-approved blood establishments, and are tested by FDA-licensed serological tests for Hepatitis B surface antigen (HBsAg), antibodies to Hepatitis C Virus (HCV) and Human Immunodeficiency Virus (HIV)-1/2. As an additional safety measure, the plasma is tested with Nucleic Acid Tests (NATs) for Hepatitis A Virus (HAV), Hepatitis B Virus (HBV), HCV and HIV-1 and found to be non-reactive (negative). The plasma is also screened for Human Parvovirus (B19V) by NAT. The limit for B19V DNA in the mini-pool is set not to exceed 10 3 IU/mL. Only plasma that passed virus screening is used for production. The FIBRYGA manufacturing process includes a solvent/detergent (S/D) step for virus inactivation, and a nanofiltration step (Planova 20N nanofilter or Pegasus SV4 nanofilter) for virus removal. The mean cumulative virus reduction factors of these steps are summarized in Table 2 below. Table 2: Cumulative Virus Reduction Factors (Log 10 ) During FIBRYGA Manufacture. PRV: Pseudorabies Virus, model for large enveloped DNA viruses. BVDV: Bovine Virus Diarrhea Virus, model for HCV. PPV: Porcine Parvovirus, model for B19V. n.a.: not applicable. * When the nanofiltration step was performed using a Pegasus SV4 nanofilter, the virus reduction factors for HIV-1, PRV, BVDV, HAV, and PPV were ≥ 3.9, ≥ 6.3, ≥ 5.0, ≥ 5.2, and 4.5, respectively. The cumulative virus reduction factors (S/D treatment + Pegasus SV4 nanofiltration) were ≥ 9.0, ≥ 12.9, ≥ 10.8, ≥ 5.2, and 4.5, respectively.</Description>
</NDC>
<NDC>
<NDCCode>68982-623-02</NDCCode>
<PackageDescription>250 mL in 1 BOTTLE, GLASS (68982-623-02) </PackageDescription>
<NDC11Code>68982-0623-02</NDC11Code>
<ProductNDC>68982-623</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Albumin (human)</ProprietaryName>
<NonProprietaryName>Albumin Human</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20061017</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125154</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>ALBUMIN HUMAN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-04-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ALBUMIN (HUMAN) 5% is indicated for the restoration and maintenance of circulating blood volume for. Hypovolemia. ( 1.1 ). Hypoalbuminemia. ( 1.2 ). Prevention of central volume depletion after paracentesis due to cirrhotic ascites. ( 1.3 ).</IndicationAndUsage>
<Description>ALBUMIN (HUMAN) 5% is a sterile, liquid preparation of albumin derived from large pools of human plasma. All units of human plasma used in the manufacture of ALBUMIN (HUMAN) 5% are provided by FDA approved blood establishments only. The product is manufactured by cold ethanol fractionation followed by ultra- and diafiltration. The manufacturing process includes final container pasteurization and additional bulk pasteurization at 60 +/- 0.5°C for 10 – 11 hours. The ALBUMIN (HUMAN) 5% manufacturing process provides a significant viral reduction in in vitro studies (table 2). These reductions are achieved through a combination of process steps including cold ethanol fractionation and final container pasteurization. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma. [see Warnings and Precautions, Infection Risk from Human Plasma (5.7)]. Table 2 In vitro reduction factor during ALBUMIN (HUMAN) 5% manufacturing. PRV: Pseudorabies Virus. SBV: Sindbis Virus. HIV-1: Human Immunodeficiency Virus - 1. Reo 3: Reovirus Type 3. PPV: Porcine Parvovirus. HAV: Hepatitis A Virus. ALBUMIN (HUMAN) 5% is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The composition of ALBUMIN (HUMAN) 5% is as follows. ALBUMIN (HUMAN) 5% contains no preservatives and components used in its packaging are latex-free.</Description>
</NDC>
<NDC>
<NDCCode>68982-643-02</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (68982-643-02) </PackageDescription>
<NDC11Code>68982-0643-02</NDC11Code>
<ProductNDC>68982-643</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Albumin (human)</ProprietaryName>
<NonProprietaryName>Albumin Human</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20061017</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125154</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>ALBUMIN HUMAN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ALBUMIN (HUMAN) 25% is indicated for the restoration and maintenance of circulating blood volume for. Hypovolemia. ( 1.1 ). Hypoalbuminemia. ( 1.2 ). Prevention of central volume depletion after paracentesis due to cirrhotic ascites. ( 1.3 ). Ovarian hyperstimulation syndrome (OHSS). ( 1.4 ). Adult respiratory distress syndrome (ARDS). ( 1.5 ). Acute nephrosis. ( 1.6 ). Hemolytic disease of the newborn (HDN). ( 1.7 ).</IndicationAndUsage>
<Description>ALBUMIN (HUMAN) 25% is a sterile, liquid preparation of albumin derived from large pools of human plasma. All units of human plasma used in the manufacture of ALBUMIN (HUMAN) 25% are provided by FDA approved blood establishments only. The product is manufactured by cold ethanol fractionation followed by ultra- and diafiltration. The manufacturing process includes final container pasteurization and additional bulk pasteurization at 60 +/- 0.5°C for 10 – 11 hours. The ALBUMIN (HUMAN) 25% manufacturing process provides a significant viral reduction in in vitro studies (table 3). These reductions are achieved through a combination of process steps including cold ethanol fractionation and final container pasteurization. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma. [see Warnings and Precautions, Infection Risk from Human Plasma (5.7)]. Table 3 In vitro reduction factor during ALBUMIN (HUMAN) 25% manufacturing. PRV: Pseudorabies Virus. SBV: Sindbis Virus. HIV-1: Human Immunodeficiency Virus - 1. Reo 3: Reovirus Type 3. PPV: Porcine Parvovirus. HAV: Hepatitis A Virus. ALBUMIN (HUMAN) 25% is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The composition of ALBUMIN (HUMAN) 25% is as follows. ALBUMIN (HUMAN) 25% contains no preservatives and components used in its packaging are latex-free.</Description>
</NDC>
<NDC>
<NDCCode>68982-810-02</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68982-810-02) > 10 mL in 1 VIAL, GLASS (68982-810-82) </PackageDescription>
<NDC11Code>68982-0810-02</NDC11Code>
<ProductNDC>68982-810</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Cutaquig</ProprietaryName>
<NonProprietaryName>Immunoglobulin G</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190503</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125668</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>165</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.</IndicationAndUsage>
<Description>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable.</Description>
</NDC>
<NDC>
<NDCCode>68982-820-02</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (68982-820-02) > 25 mL in 1 BOTTLE, GLASS (68982-820-82) </PackageDescription>
<NDC11Code>68982-0820-02</NDC11Code>
<ProductNDC>68982-820</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181112</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 90% monomers and dimers, and not more than 3% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>68982-822-02</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (68982-822-02) / 25 mL in 1 BOTTLE, GLASS (68982-822-82) </PackageDescription>
<NDC11Code>68982-0822-02</NDC11Code>
<ProductNDC>68982-822</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181112</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>68982-840-02</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE, GLASS (68982-840-02) </PackageDescription>
<NDC11Code>68982-0840-02</NDC11Code>
<ProductNDC>68982-840</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Octagam Immune Globulin (human)</ProprietaryName>
<NonProprietaryName>Immune Globulin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040521</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125062</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Octagam is an immune globulin intravenous (human), 5% liquid, indicated for treatment of primary humoral immunodeficiency (PI) ( 1 ).</IndicationAndUsage>
<Description>Immune Globulin Intravenous (Human), Octagam 5% liquid, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. Octagam 5% liquid is a solution for infusion which must be administered intravenously. All units of human plasma used in the manufacture of Octagam 5% liquid are provided by FDA-approved blood establishments only, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Triton X-100 (Octoxynol). The Octagam 5% liquid manufacturing process provides a significant viral reduction in in vitro studies (Table 3). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 3: In vitro reduction factor during Octagam 5% liquid manufacturing. *not calculated for global LRF. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus. SBV: Sindbis Virus. MEV: Mouse Encephalomyelitis Virus. PPV: Porcine Parvovirus.</Description>
</NDC>
<NDC>
<NDCCode>68982-850-02</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE, GLASS (68982-850-02) </PackageDescription>
<NDC11Code>68982-0850-02</NDC11Code>
<ProductNDC>68982-850</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Octagam Immune Globulin (human)</ProprietaryName>
<NonProprietaryName>Immune Globulin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040521</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125062</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Octagam 10% is an immune globulin intravenous (human) liquid preparation indicated for the treatment of. Chronic immune thrombocytopenic purpura (ITP) in adults ( 1.1 ). Dermatomyositis (DM) in adults ( 1.2 ).</IndicationAndUsage>
<Description>Immune Globulin Intravenous (Human), Octagam 10%, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. Octagam 10% is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%) of which not less than 96% is normal human immunoglobulin G. Octagam 10% contains not more than 3% aggregates, not less than 94% monomers and dimers and not more than 3% fragments. On average, the product contains 106 µg/mL of IgA and even lower amounts of IgM. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 4.5 and 5.0. The osmolality is 310 - 380 mosmol/kg. The manufacturing process for Octagam 10% isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact Octagam 10% contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 30%, IgG 3 is 3% and IgG 4 is 2%. Octagam 10% contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (90 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of Octagam 10% are provided by FDA-approved blood establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Triton X-100 (Octoxynol). The Octagam 10% manufacturing process shows significant viral reduction in in vitro studies (Table 6). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6: In vitro reduction factor during Octagam 10% manufacturing. *not calculated for global LRF. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus. SBV: Sindbis Virus. MEV: Mouse Encephalomyelitis Virus. PPV: Porcine Parvovirus.</Description>
</NDC>
<NDC>
<NDCCode>10019-633-02</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (10019-633-02) > 8 mL in 1 VIAL (10019-633-33)</PackageDescription>
<NDC11Code>10019-0633-02</NDC11Code>
<ProductNDC>10019-633</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin, Sulbactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20100224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065406</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>250; 125</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-11-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>10967-633-02</NDCCode>
<PackageDescription>59 mL in 1 CONTAINER (10967-633-02) </PackageDescription>
<NDC11Code>10967-0633-02</NDC11Code>
<ProductNDC>10967-633</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Revlon Mitchum Clinical Gel</ProprietaryName>
<NonProprietaryName>Aluminum Zirconium Octachlorohydrex Gly Liquid</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151130</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M019</ApplicationNumber>
<LabelerName>Revlon Consumer Products Corp</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM OCTACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Reduces underarm wetness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16714-633-02</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (16714-633-02) / 4 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>16714-0633-02</NDC11Code>
<ProductNDC>16714-633</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090124</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for. Limitations of use:Optimal duration of use has not been determined. For patients at low-risk for fracture, consider drug discontinuation after 3 to 5 years of use. (1.6).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate.The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium USP is a white, free-flowing powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform.Alendronate sodium tablets, USP for oral administration contain 13.052, 45.681, or 91.363 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>49967-633-02</NDCCode>
<PackageDescription>1 JAR in 1 CARTON (49967-633-02) / 50 g in 1 JAR</PackageDescription>
<NDC11Code>49967-0633-02</NDC11Code>
<ProductNDC>49967-633</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lancome Paris Renergie Lift Multiaction Sunscreen Broad Spectrum Spf 15 Lift And Firming Face And Neck All Skin Types</ProprietaryName>
<NonProprietaryName>Avobenzone, Octisalate And Octocrylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20161227</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>L'Oreal USA Products Inc</LabelerName>
<SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>30; 50; 70</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51316-633-02</NDCCode>
<PackageDescription>2 BOTTLE in 1 CARTON (51316-633-02) / 2.5 mL in 1 BOTTLE (51316-633-01) </PackageDescription>
<NDC11Code>51316-0633-02</NDC11Code>
<ProductNDC>51316-633</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief Eye Drops</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride Ophthalmic</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213514</ApplicationNumber>
<LabelerName>CVS Pharmacy</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves itchy eyes due to pollen, ragweed, grass, animal hair and dander.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55648-633-02</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (55648-633-02) > 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>55648-0633-02</NDC11Code>
<ProductNDC>55648-633</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Octreotide Acetate</ProprietaryName>
<NonProprietaryName>Octreotide Acetate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20110511</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090985</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>OCTREOTIDE ACETATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Somatostatin Analog [EPC],Somatostatin Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Octreotide acetate injection is indicated to reduce blood levels of growth hormone and IGF-I (somatomedin C) in acromegaly patients who have had inadequate response to or cannot be treated with surgical resection, pituitary irradiation, and bromocriptine mesylate at maximally tolerated doses. The goal is to achieve normalization of growth hormone and IGF-I (somatomedin C) levels (see DOSAGE AND ADMINISTRATION). In patients with acromegaly, octreotide acetate reduces growth hormone to within normal ranges in 50% of patients and reduces IGF-I (somatomedin C) to within normal ranges in 50%-60% of patients. Since the effects of pituitary irradiation may not become maximal for several years, adjunctive therapy with octreotide acetate to reduce blood levels of growth hormone and IGF-I (somatomedin C) offers potential benefit before the effects of irradiation are manifested. Improvement in clinical signs and symptoms or reduction in tumor size or rate of growth were not shown in clinical trials performed with octreotide acetate; these trials were not optimally designed to detect such effects.</IndicationAndUsage>
<Description>Octreotide acetate injection, a cyclic octapeptide prepared as a clear sterile solution of octreotide, acetate salt, in a buffered glacial acetic acid solution for administration by deep subcutaneous (intrafat) or intravenous injection. Octreotide acetate, known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxymethyl) propyl]-, cyclic (2→7)-disulfide; [R-(R*, R*)] acetate salt, is a long-acting octapeptide with pharmacologic actions mimicking those of the natural hormone somatostatin. Each mL of single dose vial contains octreotide (as acetate), either 50 mcg (0.05 mg), 100 mcg (0.1 mg) or 500 mcg (0.5 mg) with 7 mg sodium chloride USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. Each mL of multi dose vial contains octreotide (as acetate), either 200 mcg or 1000 mcg with 7 mg sodium chloride USP, 5 mg phenol USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. The molecular weight of octreotide acetate is 1019.3 (free peptide, C49H66N10O10S2) and its amino acid sequence is.</Description>
</NDC>
<NDC>
<NDCCode>63545-633-02</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (63545-633-02) </PackageDescription>
<NDC11Code>63545-0633-02</NDC11Code>
<ProductNDC>63545-633</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Biotitum</ProprietaryName>
<NonProprietaryName>Biotitum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220509</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>BIOTIN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-05-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64679-633-02</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (64679-633-02) > 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>64679-0633-02</NDC11Code>
<ProductNDC>64679-633</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Octreotide Acetate</ProprietaryName>
<NonProprietaryName>Octreotide Acetate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20110511</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090985</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>OCTREOTIDE ACETATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Somatostatin Analog [EPC],Somatostatin Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Octreotide acetate injection is indicated to reduce blood levels of growth hormone and IGF-I (somatomedin C) in acromegaly patients who have had inadequate response to or cannot be treated with surgical resection, pituitary irradiation, and bromocriptine mesylate at maximally tolerated doses. The goal is to achieve normalization of growth hormone and IGF-I (somatomedin C) levels (see DOSAGE AND ADMINISTRATION). In patients with acromegaly, octreotide acetate reduces growth hormone to within normal ranges in 50% of patients and reduces IGF-I (somatomedin C) to within normal ranges in 50%-60% of patients. Since the effects of pituitary irradiation may not become maximal for several years, adjunctive therapy with octreotide acetate to reduce blood levels of growth hormone and IGF-I (somatomedin C) offers potential benefit before the effects of irradiation are manifested. Improvement in clinical signs and symptoms or reduction in tumor size or rate of growth were not shown in clinical trials performed with octreotide acetate; these trials were not optimally designed to detect such effects.</IndicationAndUsage>
<Description>Octreotide acetate injection, a cyclic octapeptide prepared as a clear sterile solution of octreotide, acetate salt, in a buffered glacial acetic acid solution for administration by deep subcutaneous (intrafat) or intravenous injection. Octreotide acetate, known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxymethyl) propyl]-, cyclic (2→7)-disulfide; [R-(R*, R*)] acetate salt, is a long-acting octapeptide with pharmacologic actions mimicking those of the natural hormone somatostatin. Each mL of single dose vial contains octreotide (as acetate), either 50 mcg (0.05 mg), 100 mcg (0.1 mg) or 500 mcg (0.5 mg) with 7 mg sodium chloride USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. Each mL of multi dose vial contains octreotide (as acetate), either 200 mcg or 1000 mcg with 7 mg sodium chloride USP, 5 mg phenol USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. The molecular weight of octreotide acetate is 1019.3 (free peptide, C49H66N10O10S2) and its amino acid sequence is.</Description>
</NDC>
<NDC>
<NDCCode>67467-633-02</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (67467-633-02)</PackageDescription>
<NDC11Code>67467-0633-02</NDC11Code>
<ProductNDC>67467-633</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albumin (human)</ProprietaryName>
<NonProprietaryName>Albumin Human</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20061017</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125154</ApplicationNumber>
<LabelerName>Octapharma Pharmazeutika Produktionsgesellschaft m.b.H.</LabelerName>
<SubstanceName>ALBUMIN (HUMAN)</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Pharm_Classes>Human Serum Albumin [EPC],Increased Intravascular Volume [PE],Increased Oncotic Pressure [PE],Osmotic Activity [MoA],Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>ALBUMIN (HUMAN) 20% is indicated for the restoration and maintenance of circulating blood volume for. Hypovolemia. (1.1). Hypoalbuminemia. (1.2). Prevention of central volume depletion after paracentesis due to cirrhotic ascites. (1.3). Ovarian hyperstimulation syndrome (OHSS). (1.4). Adult respiratory distress syndrome (ARDS). (1.5). Acute nephrosis. (1.6). Hemolytic Disease of the Newborn (HDN). (1.7).</IndicationAndUsage>
<Description>ALBUMIN (HUMAN) 20% is a sterile, liquid preparation of albumin derived from large pools of human plasma. All units of human plasma used in the manufacture of ALBUMIN (HUMAN) 20% are provided by FDA approved blood establishments only. The product is manufactured by cold ethanol fractionation followed by ultra- and diafiltration. The manufacturing process includes final container pasteurization and additional bulk pasteurization at 60 +/- 0.5°C for 10 – 11 hours. The ALBUMIN (HUMAN) 20% manufacturing process provides a significant viral reduction in in vitro studies (table 2). These reductions are achieved through a combination of process steps including Cohn fractionation and final container pasteurization. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma.[see Warnings and Precautions, Infection Risk from Human Plasma (5.7)]. Table 2 In vitro reduction factor during ALBUMIN (HUMAN) 20% manufacturing. PRV:Pseudorabies Virus. SBV: Sindbis Virus. HIV-1:Human Immunodeficiency Virus - 1. Reo 3:Reovirus Type 3. PPV:Porcine Parvovirus. HAV:Hepatitis A Virus. ALBUMIN (HUMAN) 20% is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The composition of ALBUMIN (HUMAN) 20% is as follows. ALBUMIN (HUMAN) 20% contains no preservatives and components used in its packaging are latex-free.</Description>
</NDC>
<NDC>
<NDCCode>70341-633-02</NDCCode>
<PackageDescription>1 CONTAINER in 1 CARTON (70341-633-02) > 45 g in 1 CONTAINER (70341-633-01) </PackageDescription>
<NDC11Code>70341-0633-02</NDC11Code>
<ProductNDC>70341-633</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Eco Soul Real Cover Bb 23 Natural Beige</ProprietaryName>
<NonProprietaryName>Titanium Dioxide, Octinoxate, Octisalate, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>The Saem International Co., Ltd.</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; OCTINOXATE; OCTISALATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>3.43; 3.37; 2.25; 2.25</StrengthNumber>
<StrengthUnit>g/45g; g/45g; g/45g; g/45g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-12-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>75936-633-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (75936-633-02) / 35 mL in 1 TUBE (75936-633-01) </PackageDescription>
<NDC11Code>75936-0633-02</NDC11Code>
<ProductNDC>75936-633</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Protectint 42c</ProprietaryName>
<NonProprietaryName>Homosalate, Octisalate, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20231122</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Supergoop, LLC</LabelerName>
<SubstanceName>HOMOSALATE; ZINC OXIDE; OCTISALATE</SubstanceName>
<StrengthNumber>7; 13.58; 5</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stop use and ask a doctor if rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0074-1050-01</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0074-1050-01) / 1 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00074-1050-01</NDC11Code>
<ProductNDC>0074-1050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210426</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>RISANKIZUMAB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-1050-70</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0074-1050-70) / 1 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00074-1050-70</NDC11Code>
<ProductNDC>0074-1050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210426</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>RISANKIZUMAB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210426</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-1065-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0074-1065-01) * 1.2 mL in 1 CARTRIDGE (0074-1066-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-01) </PackageDescription>
<NDC11Code>00074-1065-01</NDC11Code>
<ProductNDC>0074-1065</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220923</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-1065-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0074-1065-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-01) </PackageDescription>
<NDC11Code>00074-1065-02</NDC11Code>
<ProductNDC>0074-1065</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220923</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220923</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-1070-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0074-1070-01) * 2.4 mL in 1 CARTRIDGE (0074-1069-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-01) </PackageDescription>
<NDC11Code>00074-1070-01</NDC11Code>
<ProductNDC>0074-1070</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220616</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220616</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-1070-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0074-1070-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-01) </PackageDescription>
<NDC11Code>00074-1070-02</NDC11Code>
<ProductNDC>0074-1070</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220616</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220616</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-2100-01</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0074-2100-01) / 1 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00074-2100-01</NDC11Code>
<ProductNDC>0074-2100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210426</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>RISANKIZUMAB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
</NDCList>