{
"NDC": [
{
"NDCCode": "68982-810-06",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68982-810-06) > 48 mL in 1 VIAL, GLASS (68982-810-86) ",
"NDC11Code": "68982-0810-06",
"ProductNDC": "68982-810",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Cutaquig",
"NonProprietaryName": "Immunoglobulin G",
"DosageFormName": "SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190503",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125668",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "165",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.",
"Description": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable."
},
{
"NDCCode": "68982-820-06",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (68982-820-06) > 300 mL in 1 BOTTLE, GLASS (68982-820-86) ",
"NDC11Code": "68982-0820-06",
"ProductNDC": "68982-820",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181112",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20181112",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 90% monomers and dimers, and not more than 3% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "68982-822-06",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (68982-822-06) / 300 mL in 1 BOTTLE, GLASS (68982-822-86) ",
"NDC11Code": "68982-0822-06",
"ProductNDC": "68982-822",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181112",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181112",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "13533-810-05",
"PackageDescription": "1 VIAL in 1 CARTON (13533-810-05) / 5 mL in 1 VIAL (13533-810-06) ",
"NDC11Code": "13533-0810-05",
"ProductNDC": "13533-810",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Xembify",
"NonProprietaryName": "Immune Globulin Subcutaneous, Human-klhw",
"DosageFormName": "SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190703",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125683",
"LabelerName": "GRIFOLS USA, LLC",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2025-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190703",
"SamplePackage": "N",
"IndicationAndUsage": "XEMBIFY® (immune globulin subcutaneous, human–klhw) is a 20% immune globulin solution for subcutaneous injection indicated for treatment of primary humoral immunodeficiency (PI) in patients 2 years of age and older. This includes, but is not limited to, congenital agammaglobulinemia, common variable immunodeficiency, X-linked agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.1-4.",
"Description": "XEMBIFY, immune globulin subcutaneous, human-klhw, is a 20% ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for subcutaneous administration. The purity is ≥ 98% IgG with a sub-class distribution similar to that found in normal serum. XEMBIFY consists of 18% to 22% protein in 0.16 M to 0.26 M glycine and 10 to 40 mcg/ mL polysorbate 80 at a pH of 4.1 to 4.8. The solution is clear to slightly opalescent, and colorless or pale yellow. The osmolality range is 280 to 404 mOsmol/kg. XEMBIFY contains no preservative and is not made with natural rubber latex. XEMBIFY is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. XEMBIFY is incubated in the final container (at the low pH of 4.1 to 4.8). The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV-2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g. herpes viruses); West Nile Virus (WNV) as a relevant virus; Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19. Overall virus clearance capacity was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD), and Creutzfeldt-Jakob disease (CJD) agents. Several of the individual production steps of the manufacturing process have been shown to decrease TSE infectivity of an experimental model agent. TSE reduction steps include depth filtrations (a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "59556-810-06",
"PackageDescription": "1 BOTTLE in 1 CARTON (59556-810-06) > 100 TABLET, COATED in 1 BOTTLE",
"NDC11Code": "59556-0810-06",
"ProductNDC": "59556-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vanquish",
"NonProprietaryName": "Acetaminophen, Aspirin, And Caffeine",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120626",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Strides Pharma Inc",
"SubstanceName": "ACETAMINOPHEN; ASPIRIN; CAFFEINE",
"StrengthNumber": "194; 227; 33",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20120626",
"SamplePackage": "N"
},
{
"NDCCode": "65162-810-06",
"PackageDescription": "60 TABLET, EXTENDED RELEASE in 1 BOTTLE (65162-810-06) ",
"NDC11Code": "65162-0810-06",
"ProductNDC": "65162-810",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20091203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078387",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-03-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20091203",
"SamplePackage": "N",
"IndicationAndUsage": "Alprazolam extended-release tablets are indicated for the treatment of panic disorder with or without agoraphobia, in adults.",
"Description": "Alprazolam extended-release tablets, USP contains alprazolam, USP which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam, USP is 8-chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The molecular formula is C17H13ClN4 which corresponds to a molecular weight of 308.76. The structural formula is represented below. Alprazolam, USP is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam extended-release tablet, USP for oral administration, contains 0.5 mg, 1 mg, 2 mg, or 3 mg of alprazolam, USP. The inactive ingredients are lactose monohydrate, hypromellose, calcium silicate and magnesium stearate. In addition, the 0.5 mg tablet contains FD&C Blue #2 and D&C Yellow #10. The 1 mg tablet contains D&C Yellow #10. The 2 mg tablet contains FD&C Blue #2. Meets USP Dissolution Test 5."
},
{
"NDCCode": "71205-810-06",
"PackageDescription": "6 TABLET in 1 BOTTLE (71205-810-06) ",
"NDC11Code": "71205-0810-06",
"ProductNDC": "71205-810",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090624",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Dihydrofolate Reductase Inhibitor Antibacterial [EPC], Dihydrofolate Reductase Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], Sulfonamide Antimicrobial [EPC], Sulfonamides [CS]",
"Status": "Active",
"LastUpdate": "2023-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230719",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy.",
"Description": "Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing 400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C 10H 11N 3O 3S. It is a white to off-white, practically odorless, crystalline powder, tasteless compound with a molecular weight of 253.28 and the following structural formula:. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C 14H 18N 4O 3. It is a white or cream-colored crystals or crystalline powder with a molecular weight of 290.3 and the following structural formula:. Inactive ingredients: Docusate sodium, magnesium stearate, pregelatinized starch (maize), sodium benzoate, and sodium starch glycolate."
},
{
"NDCCode": "68982-810-01",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68982-810-01) > 6 mL in 1 VIAL, GLASS (68982-810-81) ",
"NDC11Code": "68982-0810-01",
"ProductNDC": "68982-810",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Cutaquig",
"NonProprietaryName": "Immunoglobulin G",
"DosageFormName": "SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190503",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125668",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "165",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.",
"Description": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable."
},
{
"NDCCode": "68982-810-02",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68982-810-02) > 10 mL in 1 VIAL, GLASS (68982-810-82) ",
"NDC11Code": "68982-0810-02",
"ProductNDC": "68982-810",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Cutaquig",
"NonProprietaryName": "Immunoglobulin G",
"DosageFormName": "SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190503",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125668",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "165",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.",
"Description": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable."
},
{
"NDCCode": "68982-810-03",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68982-810-03) > 12 mL in 1 VIAL, GLASS (68982-810-83) ",
"NDC11Code": "68982-0810-03",
"ProductNDC": "68982-810",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Cutaquig",
"NonProprietaryName": "Immunoglobulin G",
"DosageFormName": "SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190503",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125668",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "165",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.",
"Description": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable."
},
{
"NDCCode": "68982-810-04",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68982-810-04) > 20 mL in 1 VIAL, GLASS (68982-810-84) ",
"NDC11Code": "68982-0810-04",
"ProductNDC": "68982-810",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Cutaquig",
"NonProprietaryName": "Immunoglobulin G",
"DosageFormName": "SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190503",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125668",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "165",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.",
"Description": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable."
},
{
"NDCCode": "68982-810-05",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68982-810-05) > 24 mL in 1 VIAL, GLASS (68982-810-85) ",
"NDC11Code": "68982-0810-05",
"ProductNDC": "68982-810",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Cutaquig",
"NonProprietaryName": "Immunoglobulin G",
"DosageFormName": "SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190503",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125668",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "165",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.",
"Description": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable."
},
{
"NDCCode": "10893-810-15",
"PackageDescription": "15 mL in 1 BOTTLE (10893-810-15) ",
"NDC11Code": "10893-0810-15",
"ProductNDC": "10893-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naturasil Molluscalm",
"NonProprietaryName": "Thuja Occidentalis",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230821",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Nature's Innovation, Inc.",
"SubstanceName": "THUJA OCCIDENTALIS LEAF",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/15mL",
"Status": "Deprecated",
"LastUpdate": "2024-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230821",
"SamplePackage": "N",
"IndicationAndUsage": "Symptomatic treatment of Water Warts and Itching Bumps."
},
{
"NDCCode": "10893-840-02",
"PackageDescription": "1 KIT in 1 KIT (10893-840-02) * 15 mL in 1 BOTTLE (10893-810-15) * 118.3 g in 1 BOX (10893-830-04) ",
"NDC11Code": "10893-0840-02",
"ProductNDC": "10893-840",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naturasil Molluscalm Treatment Kit",
"NonProprietaryName": "Sulfur, Thuja Occidentalis",
"DosageFormName": "KIT",
"StartMarketingDate": "20230821",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Nature's Innovation, Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230821",
"SamplePackage": "N"
},
{
"NDCCode": "11084-810-41",
"PackageDescription": "1000 mL in 1 BOTTLE (11084-810-41) ",
"NDC11Code": "11084-0810-41",
"ProductNDC": "11084-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Medicated Soft N Sure",
"ProprietaryNameSuffix": "Healthcare Personnel Handwash",
"NonProprietaryName": "Triclosan",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180201",
"EndMarketingDate": "20200625",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Deb USA, Inc.",
"SubstanceName": "TRICLOSAN",
"StrengthNumber": ".5",
"StrengthUnit": "g/1000mL",
"Status": "Deprecated",
"LastUpdate": "2020-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180201",
"EndMarketingDatePackage": "20200625",
"SamplePackage": "N"
},
{
"NDCCode": "11673-810-43",
"PackageDescription": "473 mL in 1 BOTTLE, PLASTIC (11673-810-43) ",
"NDC11Code": "11673-0810-43",
"ProductNDC": "11673-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "70%",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "19890715",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Target Corp.,",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "500",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2025-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19890715",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "11673-810-72",
"PackageDescription": "295 mL in 1 BOTTLE, SPRAY (11673-810-72) ",
"NDC11Code": "11673-0810-72",
"ProductNDC": "11673-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "70%",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "19890715",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Target Corp.,",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "500",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2025-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19890715",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "14537-810-12",
"PackageDescription": "12 BAG in 1 CARTON (14537-810-12) / 750 mL in 1 BAG (14537-810-75) ",
"NDC11Code": "14537-0810-12",
"ProductNDC": "14537-810",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acd",
"ProprietaryNameSuffix": "A",
"NonProprietaryName": "Citric Acid Monohydrate, Dextrose Monohydrate, And Trisodium Citrate Dihydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "BA010228",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE",
"StrengthNumber": ".8; 2.45; 2.2",
"StrengthUnit": "g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260601",
"SamplePackage": "N",
"IndicationAndUsage": "Anticoagulant Citrate Dextrose Solution USP (ACD) Solution A is an anticoagulant for blood collection for use only with apheresis devices. [See Dosage and Administration (2).].",
"Description": "Anticoagulant Citrate Dextrose Solution USP (ACD) Solution A is designed to be metered by an apheresis device in apheresis procedures, to prevent platelet activation and coagulation as blood moves throughout the extracorporeal unit (tubing set) in an apheresis procedure. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the ingredients are provided in Table 1. Each 100 mL of Anticoagulant Citrate Dextrose Solution USP (ACD) Solution A contains: (%w/v) Citric Acid, Monohydrate 0.8 g; Dextrose Monohydrate 2.45 g; Sodium Citrate Dihydrate 2.2 g; and Water for Injection. The polyolefin bag is not made with natural rubber latex or PVC. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The solution contact layer is an elasticized polyolefin. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration. The bag is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary."
},
{
"NDCCode": "19515-810-52",
"PackageDescription": "10 SYRINGE in 1 CARTON (19515-810-52) / .5 mL in 1 SYRINGE (19515-810-41) ",
"NDC11Code": "19515-0810-52",
"ProductNDC": "19515-810",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Flulaval",
"ProprietaryNameSuffix": "2024/2025",
"NonProprietaryName": "Influenza Virus Vaccine",
"DosageFormName": "SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20240701",
"EndMarketingDate": "20250630",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125163",
"LabelerName": "ID Biomedical Corporation of Quebec",
"SubstanceName": "INFLUENZA A VIRUS A/THAILAND/8/2022 IVR-237 ANTIGEN (UV, FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/VICTORIA/4897/2022 IVR-238 (H1N1) ANTIGEN (UV, FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 BVR-26 ANTIGEN (UV, FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "15; 15; 15",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL",
"Status": "Deprecated",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240701",
"EndMarketingDatePackage": "20250630",
"SamplePackage": "N",
"IndicationAndUsage": "FLULAVAL is indicated for active immunization for the prevention of disease caused by influenza A subtype viruses and type B virus contained in the vaccine. FLULAVAL is approved for use in persons aged 6 months and older.",
"Description": "FLULAVAL, Influenza Vaccine, for intramuscular use, is a trivalent, split-virion, inactivated influenza virus vaccine prepared from virus propagated in the allantoic cavity of embryonated hens’ eggs. Each of the influenza viruses is produced and purified separately. The virus is inactivated with ultraviolet light treatment followed by formaldehyde treatment, purified by centrifugation, and disrupted with sodium deoxycholate. FLULAVAL is a sterile, opalescent, translucent to off-white injectable suspension in a phosphate-buffered saline solution that may sediment slightly. The sediment resuspends upon shaking to form a homogeneous suspension. FLULAVAL has been standardized according to U.S. Public Health Service (USPHS) requirements for the 2024‑2025 influenza season and is formulated to contain 45 micrograms (mcg) hemagglutinin (HA) per 0.5-mL dose in the recommended ratio of 15 mcg HA of each of the following 3 strains: A/Victoria/4897/2022 (H1N1) IVR‑238, A/Thailand/8/2022 (H3N2) IVR‑237, and B/Austria/1359417/2021 BVR‑26 (B-Victoria lineage). FLULAVAL is formulated without preservatives and does not contain thimerosal. Each 0.5-mL dose may also contain residual amounts of ovalbumin (≤0.3 mcg), formaldehyde (≤25 mcg), sodium deoxycholate (≤50 mcg), α-tocopheryl hydrogen succinate (≤240 mcg), and polysorbate 80 (≤665 mcg) from the manufacturing process. Antibiotics are not used in the manufacture of this vaccine. The tip caps and plungers of the prefilled syringes are not made with natural rubber latex."
},
{
"NDCCode": "37000-045-24",
"PackageDescription": "1 KIT in 1 PACKAGE (37000-045-24) * 354 mL in 1 BOTTLE, PLASTIC (37000-815-12) * 354 mL in 1 BOTTLE, PLASTIC (37000-810-12) ",
"NDC11Code": "37000-0045-24",
"ProductNDC": "37000-045",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vicks Dayquil And Vicks Nyquil",
"ProprietaryNameSuffix": "Severe Cold And Flu",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, Phenylephrine Hydrochloride, And Doxylamine Succinate",
"DosageFormName": "KIT",
"StartMarketingDate": "20140731",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140731",
"SamplePackage": "N"
},
{
"NDCCode": "37000-814-24",
"PackageDescription": "1 KIT in 1 PACKAGE (37000-814-24) * 354 mL in 1 BOTTLE, PLASTIC (37000-812-12) * 354 mL in 1 BOTTLE, PLASTIC (37000-810-12) ",
"NDC11Code": "37000-0814-24",
"ProductNDC": "37000-814",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vicks Dayquil And Vicks Nyquil",
"ProprietaryNameSuffix": "Severe Cold And Flu",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, Phenylephrine Hydrochloride, And Doxylamine Succinate",
"DosageFormName": "KIT",
"StartMarketingDate": "20130722",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130722",
"SamplePackage": "N"
},
{
"NDCCode": "41250-810-38",
"PackageDescription": "296 mL in 1 BOTTLE, SPRAY (41250-810-38) ",
"NDC11Code": "41250-0810-38",
"ProductNDC": "41250-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "70%",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090514",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Meijer, Inc.",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-06-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090514",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "41250-810-45",
"PackageDescription": "946 mL in 1 BOTTLE, PLASTIC (41250-810-45) ",
"NDC11Code": "41250-0810-45",
"ProductNDC": "41250-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "70%",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090514",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Meijer, Inc.",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-06-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090514",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "42291-810-15",
"PackageDescription": "150 CAPSULE, GELATIN COATED in 1 BOTTLE (42291-810-15) ",
"NDC11Code": "42291-0810-15",
"ProductNDC": "42291-810",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140620",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078868",
"LabelerName": "AvKARE",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20140620",
"SamplePackage": "N",
"IndicationAndUsage": "Tizanidine is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration(2.1)].",
"Description": "Tizanidine hydrochloride is a central alpha 2-adrenergic agonist. Tizanidine HCl (tizanidine) is a white to off-white, fine crystalline powder, which is odorless or with a faint characteristic odor. Tizanidine is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiodiazole hydrochloride. Tizanidine’s molecular formula is C 9H 8CIN 5S·HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules 2 mg, 4 mg and 6 mg, supplied for oral administration, are composed of the active ingredient, tizanidine hydrochloride (2.288 mg equivalent to 2 mg tizanidine base, 4.576 mg equivalent to 4 mg tizanidine base, and 6.864 mg equivalent to 6 mg tizanidine base). Each capsule contains the following inactive ingredients: anhydrous lactose, polyvinyl acetate phthalate, stearic acid, and talc. Each capsule shell contains FD&C blue #2, titanium dioxide and gelatin. In addition, the 4 mg capsules shell contains FDA/E172 yellow iron oxide. The capsule printing ink contains shellac, black iron oxide, n-butyl alcohol, propylene glycol, SDA 3A alcohol, FD&C blue #1, FD&C blue #2, FD&C red #40, and FD&C yellow #10."
},
{
"NDCCode": "42637-810-01",
"PackageDescription": "24 LOZENGE in 1 BOX (42637-810-01) ",
"NDC11Code": "42637-0810-01",
"ProductNDC": "42637-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Throat And Chest Anise And Menthol",
"NonProprietaryName": "Menthol",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20110713",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Jakemans (Confectioners) Limited",
"SubstanceName": "MENTHOL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20110713",
"SamplePackage": "N"
},
{
"NDCCode": "42637-810-02",
"PackageDescription": "30 LOZENGE in 1 BAG (42637-810-02) ",
"NDC11Code": "42637-0810-02",
"ProductNDC": "42637-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Throat And Chest Anise And Menthol",
"NonProprietaryName": "Menthol",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20110713",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Jakemans (Confectioners) Limited",
"SubstanceName": "MENTHOL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20110713",
"SamplePackage": "N"
},
{
"NDCCode": "43538-810-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (43538-810-10) / 20 mL in 1 VIAL, GLASS (43538-810-01) ",
"NDC11Code": "43538-0810-10",
"ProductNDC": "43538-810",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20080630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065401",
"LabelerName": "Eurofarma, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260620",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection and other antibacterial drugs, Vancomycin Hydrochloride, for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientals). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula."
},
{
"NDCCode": "50594-810-43",
"PackageDescription": "473 mL in 1 BOTTLE, PLASTIC (50594-810-43) ",
"NDC11Code": "50594-0810-43",
"ProductNDC": "50594-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "70%",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150909",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Big Lots",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20150909",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "50804-810-08",
"PackageDescription": "3785 mL in 1 BOTTLE, PLASTIC (50804-810-08) ",
"NDC11Code": "50804-0810-08",
"ProductNDC": "50804-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "70%",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100408",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Perrigo Direct, Inc.",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20100408",
"SamplePackage": "N",
"IndicationAndUsage": "First aid to help prevent the risk of infection in: 1 minor cuts , 2 scrapes , 3 burns."
},
{
"NDCCode": "55670-810-01",
"PackageDescription": "75 PACKET in 1 BOX (55670-810-01) > .75 g in 1 PACKET",
"NDC11Code": "55670-0810-01",
"ProductNDC": "55670-810",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anesthetic",
"NonProprietaryName": "Benzocaine",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120712",
"EndMarketingDate": "20240531",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part356",
"LabelerName": "Moore Medical LLC",
"SubstanceName": "BENZOCAINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120712",
"EndMarketingDatePackage": "20240531",
"SamplePackage": "N",
"IndicationAndUsage": "For the temporary relief of minor pain and sore mouth associated with toothache, minor dental procedures and irritations from dentures or orthodontic appliances."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>68982-810-06</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68982-810-06) > 48 mL in 1 VIAL, GLASS (68982-810-86) </PackageDescription>
<NDC11Code>68982-0810-06</NDC11Code>
<ProductNDC>68982-810</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Cutaquig</ProprietaryName>
<NonProprietaryName>Immunoglobulin G</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190503</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125668</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>165</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.</IndicationAndUsage>
<Description>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable.</Description>
</NDC>
<NDC>
<NDCCode>68982-820-06</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (68982-820-06) > 300 mL in 1 BOTTLE, GLASS (68982-820-86) </PackageDescription>
<NDC11Code>68982-0820-06</NDC11Code>
<ProductNDC>68982-820</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181112</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 90% monomers and dimers, and not more than 3% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>68982-822-06</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (68982-822-06) / 300 mL in 1 BOTTLE, GLASS (68982-822-86) </PackageDescription>
<NDC11Code>68982-0822-06</NDC11Code>
<ProductNDC>68982-822</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181112</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>13533-810-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (13533-810-05) / 5 mL in 1 VIAL (13533-810-06) </PackageDescription>
<NDC11Code>13533-0810-05</NDC11Code>
<ProductNDC>13533-810</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Xembify</ProprietaryName>
<NonProprietaryName>Immune Globulin Subcutaneous, Human-klhw</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190703</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125683</ApplicationNumber>
<LabelerName>GRIFOLS USA, LLC</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XEMBIFY® (immune globulin subcutaneous, human–klhw) is a 20% immune globulin solution for subcutaneous injection indicated for treatment of primary humoral immunodeficiency (PI) in patients 2 years of age and older. This includes, but is not limited to, congenital agammaglobulinemia, common variable immunodeficiency, X-linked agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.1-4.</IndicationAndUsage>
<Description>XEMBIFY, immune globulin subcutaneous, human-klhw, is a 20% ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for subcutaneous administration. The purity is ≥ 98% IgG with a sub-class distribution similar to that found in normal serum. XEMBIFY consists of 18% to 22% protein in 0.16 M to 0.26 M glycine and 10 to 40 mcg/ mL polysorbate 80 at a pH of 4.1 to 4.8. The solution is clear to slightly opalescent, and colorless or pale yellow. The osmolality range is 280 to 404 mOsmol/kg. XEMBIFY contains no preservative and is not made with natural rubber latex. XEMBIFY is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. XEMBIFY is incubated in the final container (at the low pH of 4.1 to 4.8). The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV-2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g. herpes viruses); West Nile Virus (WNV) as a relevant virus; Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19. Overall virus clearance capacity was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD), and Creutzfeldt-Jakob disease (CJD) agents. Several of the individual production steps of the manufacturing process have been shown to decrease TSE infectivity of an experimental model agent. TSE reduction steps include depth filtrations (a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>59556-810-06</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (59556-810-06) > 100 TABLET, COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>59556-0810-06</NDC11Code>
<ProductNDC>59556-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vanquish</ProprietaryName>
<NonProprietaryName>Acetaminophen, Aspirin, And Caffeine</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120626</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Strides Pharma Inc</LabelerName>
<SubstanceName>ACETAMINOPHEN; ASPIRIN; CAFFEINE</SubstanceName>
<StrengthNumber>194; 227; 33</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65162-810-06</NDCCode>
<PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (65162-810-06) </PackageDescription>
<NDC11Code>65162-0810-06</NDC11Code>
<ProductNDC>65162-810</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078387</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-03-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alprazolam extended-release tablets are indicated for the treatment of panic disorder with or without agoraphobia, in adults.</IndicationAndUsage>
<Description>Alprazolam extended-release tablets, USP contains alprazolam, USP which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam, USP is 8-chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The molecular formula is C17H13ClN4 which corresponds to a molecular weight of 308.76. The structural formula is represented below. Alprazolam, USP is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam extended-release tablet, USP for oral administration, contains 0.5 mg, 1 mg, 2 mg, or 3 mg of alprazolam, USP. The inactive ingredients are lactose monohydrate, hypromellose, calcium silicate and magnesium stearate. In addition, the 0.5 mg tablet contains FD&C Blue #2 and D&C Yellow #10. The 1 mg tablet contains D&C Yellow #10. The 2 mg tablet contains FD&C Blue #2. Meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>71205-810-06</NDCCode>
<PackageDescription>6 TABLET in 1 BOTTLE (71205-810-06) </PackageDescription>
<NDC11Code>71205-0810-06</NDC11Code>
<ProductNDC>71205-810</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090624</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Dihydrofolate Reductase Inhibitor Antibacterial [EPC], Dihydrofolate Reductase Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], Sulfonamide Antimicrobial [EPC], Sulfonamides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of sulfamethoxazole and trimethoprim tablets and other antibacterial drugs, sulfamethoxazole and trimethoprim tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy.</IndicationAndUsage>
<Description>Sulfamethoxazole and trimethoprim is a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing 400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N1-(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C 10H 11N 3O 3S. It is a white to off-white, practically odorless, crystalline powder, tasteless compound with a molecular weight of 253.28 and the following structural formula:. Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C 14H 18N 4O 3. It is a white or cream-colored crystals or crystalline powder with a molecular weight of 290.3 and the following structural formula:. Inactive ingredients: Docusate sodium, magnesium stearate, pregelatinized starch (maize), sodium benzoate, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>68982-810-01</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68982-810-01) > 6 mL in 1 VIAL, GLASS (68982-810-81) </PackageDescription>
<NDC11Code>68982-0810-01</NDC11Code>
<ProductNDC>68982-810</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Cutaquig</ProprietaryName>
<NonProprietaryName>Immunoglobulin G</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190503</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125668</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>165</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.</IndicationAndUsage>
<Description>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable.</Description>
</NDC>
<NDC>
<NDCCode>68982-810-02</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68982-810-02) > 10 mL in 1 VIAL, GLASS (68982-810-82) </PackageDescription>
<NDC11Code>68982-0810-02</NDC11Code>
<ProductNDC>68982-810</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Cutaquig</ProprietaryName>
<NonProprietaryName>Immunoglobulin G</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190503</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125668</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>165</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.</IndicationAndUsage>
<Description>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable.</Description>
</NDC>
<NDC>
<NDCCode>68982-810-03</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68982-810-03) > 12 mL in 1 VIAL, GLASS (68982-810-83) </PackageDescription>
<NDC11Code>68982-0810-03</NDC11Code>
<ProductNDC>68982-810</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Cutaquig</ProprietaryName>
<NonProprietaryName>Immunoglobulin G</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190503</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125668</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>165</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.</IndicationAndUsage>
<Description>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable.</Description>
</NDC>
<NDC>
<NDCCode>68982-810-04</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68982-810-04) > 20 mL in 1 VIAL, GLASS (68982-810-84) </PackageDescription>
<NDC11Code>68982-0810-04</NDC11Code>
<ProductNDC>68982-810</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Cutaquig</ProprietaryName>
<NonProprietaryName>Immunoglobulin G</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190503</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125668</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>165</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.</IndicationAndUsage>
<Description>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable.</Description>
</NDC>
<NDC>
<NDCCode>68982-810-05</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68982-810-05) > 24 mL in 1 VIAL, GLASS (68982-810-85) </PackageDescription>
<NDC11Code>68982-0810-05</NDC11Code>
<ProductNDC>68982-810</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Cutaquig</ProprietaryName>
<NonProprietaryName>Immunoglobulin G</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190503</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125668</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>165</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.</IndicationAndUsage>
<Description>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable.</Description>
</NDC>
<NDC>
<NDCCode>10893-810-15</NDCCode>
<PackageDescription>15 mL in 1 BOTTLE (10893-810-15) </PackageDescription>
<NDC11Code>10893-0810-15</NDC11Code>
<ProductNDC>10893-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naturasil Molluscalm</ProprietaryName>
<NonProprietaryName>Thuja Occidentalis</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230821</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Nature's Innovation, Inc.</LabelerName>
<SubstanceName>THUJA OCCIDENTALIS LEAF</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/15mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Symptomatic treatment of Water Warts and Itching Bumps.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10893-840-02</NDCCode>
<PackageDescription>1 KIT in 1 KIT (10893-840-02) * 15 mL in 1 BOTTLE (10893-810-15) * 118.3 g in 1 BOX (10893-830-04) </PackageDescription>
<NDC11Code>10893-0840-02</NDC11Code>
<ProductNDC>10893-840</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naturasil Molluscalm Treatment Kit</ProprietaryName>
<NonProprietaryName>Sulfur, Thuja Occidentalis</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20230821</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Nature's Innovation, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>11084-810-41</NDCCode>
<PackageDescription>1000 mL in 1 BOTTLE (11084-810-41) </PackageDescription>
<NDC11Code>11084-0810-41</NDC11Code>
<ProductNDC>11084-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Medicated Soft N Sure</ProprietaryName>
<ProprietaryNameSuffix>Healthcare Personnel Handwash</ProprietaryNameSuffix>
<NonProprietaryName>Triclosan</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180201</StartMarketingDate>
<EndMarketingDate>20200625</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Deb USA, Inc.</LabelerName>
<SubstanceName>TRICLOSAN</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180201</StartMarketingDatePackage>
<EndMarketingDatePackage>20200625</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>11673-810-43</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE, PLASTIC (11673-810-43) </PackageDescription>
<NDC11Code>11673-0810-43</NDC11Code>
<ProductNDC>11673-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>70%</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19890715</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Target Corp.,</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11673-810-72</NDCCode>
<PackageDescription>295 mL in 1 BOTTLE, SPRAY (11673-810-72) </PackageDescription>
<NDC11Code>11673-0810-72</NDC11Code>
<ProductNDC>11673-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>70%</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19890715</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Target Corp.,</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>14537-810-12</NDCCode>
<PackageDescription>12 BAG in 1 CARTON (14537-810-12) / 750 mL in 1 BAG (14537-810-75) </PackageDescription>
<NDC11Code>14537-0810-12</NDC11Code>
<ProductNDC>14537-810</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acd</ProprietaryName>
<ProprietaryNameSuffix>A</ProprietaryNameSuffix>
<NonProprietaryName>Citric Acid Monohydrate, Dextrose Monohydrate, And Trisodium Citrate Dihydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>BA010228</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE</SubstanceName>
<StrengthNumber>.8; 2.45; 2.2</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Anticoagulant Citrate Dextrose Solution USP (ACD) Solution A is an anticoagulant for blood collection for use only with apheresis devices. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>Anticoagulant Citrate Dextrose Solution USP (ACD) Solution A is designed to be metered by an apheresis device in apheresis procedures, to prevent platelet activation and coagulation as blood moves throughout the extracorporeal unit (tubing set) in an apheresis procedure. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the ingredients are provided in Table 1. Each 100 mL of Anticoagulant Citrate Dextrose Solution USP (ACD) Solution A contains: (%w/v) Citric Acid, Monohydrate 0.8 g; Dextrose Monohydrate 2.45 g; Sodium Citrate Dihydrate 2.2 g; and Water for Injection. The polyolefin bag is not made with natural rubber latex or PVC. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The solution contact layer is an elasticized polyolefin. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration. The bag is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.</Description>
</NDC>
<NDC>
<NDCCode>19515-810-52</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (19515-810-52) / .5 mL in 1 SYRINGE (19515-810-41) </PackageDescription>
<NDC11Code>19515-0810-52</NDC11Code>
<ProductNDC>19515-810</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Flulaval</ProprietaryName>
<ProprietaryNameSuffix>2024/2025</ProprietaryNameSuffix>
<NonProprietaryName>Influenza Virus Vaccine</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20240701</StartMarketingDate>
<EndMarketingDate>20250630</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125163</ApplicationNumber>
<LabelerName>ID Biomedical Corporation of Quebec</LabelerName>
<SubstanceName>INFLUENZA A VIRUS A/THAILAND/8/2022 IVR-237 ANTIGEN (UV, FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/VICTORIA/4897/2022 IVR-238 (H1N1) ANTIGEN (UV, FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 BVR-26 ANTIGEN (UV, FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>15; 15; 15</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240701</StartMarketingDatePackage>
<EndMarketingDatePackage>20250630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FLULAVAL is indicated for active immunization for the prevention of disease caused by influenza A subtype viruses and type B virus contained in the vaccine. FLULAVAL is approved for use in persons aged 6 months and older.</IndicationAndUsage>
<Description>FLULAVAL, Influenza Vaccine, for intramuscular use, is a trivalent, split-virion, inactivated influenza virus vaccine prepared from virus propagated in the allantoic cavity of embryonated hens’ eggs. Each of the influenza viruses is produced and purified separately. The virus is inactivated with ultraviolet light treatment followed by formaldehyde treatment, purified by centrifugation, and disrupted with sodium deoxycholate. FLULAVAL is a sterile, opalescent, translucent to off-white injectable suspension in a phosphate-buffered saline solution that may sediment slightly. The sediment resuspends upon shaking to form a homogeneous suspension. FLULAVAL has been standardized according to U.S. Public Health Service (USPHS) requirements for the 2024‑2025 influenza season and is formulated to contain 45 micrograms (mcg) hemagglutinin (HA) per 0.5-mL dose in the recommended ratio of 15 mcg HA of each of the following 3 strains: A/Victoria/4897/2022 (H1N1) IVR‑238, A/Thailand/8/2022 (H3N2) IVR‑237, and B/Austria/1359417/2021 BVR‑26 (B-Victoria lineage). FLULAVAL is formulated without preservatives and does not contain thimerosal. Each 0.5-mL dose may also contain residual amounts of ovalbumin (≤0.3 mcg), formaldehyde (≤25 mcg), sodium deoxycholate (≤50 mcg), α-tocopheryl hydrogen succinate (≤240 mcg), and polysorbate 80 (≤665 mcg) from the manufacturing process. Antibiotics are not used in the manufacture of this vaccine. The tip caps and plungers of the prefilled syringes are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>37000-045-24</NDCCode>
<PackageDescription>1 KIT in 1 PACKAGE (37000-045-24) * 354 mL in 1 BOTTLE, PLASTIC (37000-815-12) * 354 mL in 1 BOTTLE, PLASTIC (37000-810-12) </PackageDescription>
<NDC11Code>37000-0045-24</NDC11Code>
<ProductNDC>37000-045</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vicks Dayquil And Vicks Nyquil</ProprietaryName>
<ProprietaryNameSuffix>Severe Cold And Flu</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, Phenylephrine Hydrochloride, And Doxylamine Succinate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20140731</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37000-814-24</NDCCode>
<PackageDescription>1 KIT in 1 PACKAGE (37000-814-24) * 354 mL in 1 BOTTLE, PLASTIC (37000-812-12) * 354 mL in 1 BOTTLE, PLASTIC (37000-810-12) </PackageDescription>
<NDC11Code>37000-0814-24</NDC11Code>
<ProductNDC>37000-814</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vicks Dayquil And Vicks Nyquil</ProprietaryName>
<ProprietaryNameSuffix>Severe Cold And Flu</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, Phenylephrine Hydrochloride, And Doxylamine Succinate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20130722</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>41250-810-38</NDCCode>
<PackageDescription>296 mL in 1 BOTTLE, SPRAY (41250-810-38) </PackageDescription>
<NDC11Code>41250-0810-38</NDC11Code>
<ProductNDC>41250-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>70%</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090514</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Meijer, Inc.</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-810-45</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, PLASTIC (41250-810-45) </PackageDescription>
<NDC11Code>41250-0810-45</NDC11Code>
<ProductNDC>41250-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>70%</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090514</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Meijer, Inc.</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42291-810-15</NDCCode>
<PackageDescription>150 CAPSULE, GELATIN COATED in 1 BOTTLE (42291-810-15) </PackageDescription>
<NDC11Code>42291-0810-15</NDC11Code>
<ProductNDC>42291-810</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140620</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078868</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tizanidine is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration(2.1)].</IndicationAndUsage>
<Description>Tizanidine hydrochloride is a central alpha 2-adrenergic agonist. Tizanidine HCl (tizanidine) is a white to off-white, fine crystalline powder, which is odorless or with a faint characteristic odor. Tizanidine is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiodiazole hydrochloride. Tizanidine’s molecular formula is C 9H 8CIN 5S·HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules 2 mg, 4 mg and 6 mg, supplied for oral administration, are composed of the active ingredient, tizanidine hydrochloride (2.288 mg equivalent to 2 mg tizanidine base, 4.576 mg equivalent to 4 mg tizanidine base, and 6.864 mg equivalent to 6 mg tizanidine base). Each capsule contains the following inactive ingredients: anhydrous lactose, polyvinyl acetate phthalate, stearic acid, and talc. Each capsule shell contains FD&C blue #2, titanium dioxide and gelatin. In addition, the 4 mg capsules shell contains FDA/E172 yellow iron oxide. The capsule printing ink contains shellac, black iron oxide, n-butyl alcohol, propylene glycol, SDA 3A alcohol, FD&C blue #1, FD&C blue #2, FD&C red #40, and FD&C yellow #10.</Description>
</NDC>
<NDC>
<NDCCode>42637-810-01</NDCCode>
<PackageDescription>24 LOZENGE in 1 BOX (42637-810-01) </PackageDescription>
<NDC11Code>42637-0810-01</NDC11Code>
<ProductNDC>42637-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Throat And Chest Anise And Menthol</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110713</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Jakemans (Confectioners) Limited</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110713</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42637-810-02</NDCCode>
<PackageDescription>30 LOZENGE in 1 BAG (42637-810-02) </PackageDescription>
<NDC11Code>42637-0810-02</NDC11Code>
<ProductNDC>42637-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Throat And Chest Anise And Menthol</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110713</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Jakemans (Confectioners) Limited</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110713</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43538-810-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (43538-810-10) / 20 mL in 1 VIAL, GLASS (43538-810-01) </PackageDescription>
<NDC11Code>43538-0810-10</NDC11Code>
<ProductNDC>43538-810</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20080630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065401</ApplicationNumber>
<LabelerName>Eurofarma, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection and other antibacterial drugs, Vancomycin Hydrochloride, for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientals). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24∙ HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>50594-810-43</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE, PLASTIC (50594-810-43) </PackageDescription>
<NDC11Code>50594-0810-43</NDC11Code>
<ProductNDC>50594-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>70%</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150909</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Big Lots</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50804-810-08</NDCCode>
<PackageDescription>3785 mL in 1 BOTTLE, PLASTIC (50804-810-08) </PackageDescription>
<NDC11Code>50804-0810-08</NDC11Code>
<ProductNDC>50804-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>70%</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100408</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Perrigo Direct, Inc.</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>First aid to help prevent the risk of infection in: 1 minor cuts , 2 scrapes , 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55670-810-01</NDCCode>
<PackageDescription>75 PACKET in 1 BOX (55670-810-01) > .75 g in 1 PACKET</PackageDescription>
<NDC11Code>55670-0810-01</NDC11Code>
<ProductNDC>55670-810</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anesthetic</ProprietaryName>
<NonProprietaryName>Benzocaine</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120712</StartMarketingDate>
<EndMarketingDate>20240531</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part356</ApplicationNumber>
<LabelerName>Moore Medical LLC</LabelerName>
<SubstanceName>BENZOCAINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120712</StartMarketingDatePackage>
<EndMarketingDatePackage>20240531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the temporary relief of minor pain and sore mouth associated with toothache, minor dental procedures and irritations from dentures or orthodontic appliances.</IndicationAndUsage>
</NDC>
</NDCList>